drivers/net/phy/intel-xway.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
   4  * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de>
   5  */
   6
   7 #include <linux/mdio.h>
   8 #include <linux/module.h>
   9 #include <linux/phy.h>
  10 #include <linux/of.h>
  11
  12 #define XWAY_MDIO_IMASK                 0x19    /* interrupt mask */
  13 #define XWAY_MDIO_ISTAT                 0x1A    /* interrupt status */
  14 #define XWAY_MDIO_LED                   0x1B    /* led control */
  15
  16 /* bit 15:12 are reserved */
  17 #define XWAY_MDIO_LED_LED3_EN           BIT(11) /* Enable the integrated function of LED3 */
  18 #define XWAY_MDIO_LED_LED2_EN           BIT(10) /* Enable the integrated function of LED2 */
  19 #define XWAY_MDIO_LED_LED1_EN           BIT(9)  /* Enable the integrated function of LED1 */
  20 #define XWAY_MDIO_LED_LED0_EN           BIT(8)  /* Enable the integrated function of LED0 */
  21 /* bit 7:4 are reserved */
  22 #define XWAY_MDIO_LED_LED3_DA           BIT(3)  /* Direct Access to LED3 */
  23 #define XWAY_MDIO_LED_LED2_DA           BIT(2)  /* Direct Access to LED2 */
  24 #define XWAY_MDIO_LED_LED1_DA           BIT(1)  /* Direct Access to LED1 */
  25 #define XWAY_MDIO_LED_LED0_DA           BIT(0)  /* Direct Access to LED0 */
  26
  27 #define XWAY_MDIO_INIT_WOL              BIT(15) /* Wake-On-LAN */
  28 #define XWAY_MDIO_INIT_MSRE             BIT(14)
  29 #define XWAY_MDIO_INIT_NPRX             BIT(13)
  30 #define XWAY_MDIO_INIT_NPTX             BIT(12)
  31 #define XWAY_MDIO_INIT_ANE              BIT(11) /* Auto-Neg error */
  32 #define XWAY_MDIO_INIT_ANC              BIT(10) /* Auto-Neg complete */
  33 #define XWAY_MDIO_INIT_ADSC             BIT(5)  /* Link auto-downspeed detect */
  34 #define XWAY_MDIO_INIT_MPIPC            BIT(4)
  35 #define XWAY_MDIO_INIT_MDIXC            BIT(3)
  36 #define XWAY_MDIO_INIT_DXMC             BIT(2)  /* Duplex mode change */
  37 #define XWAY_MDIO_INIT_LSPC             BIT(1)  /* Link speed change */
  38 #define XWAY_MDIO_INIT_LSTC             BIT(0)  /* Link state change */
  39 #define XWAY_MDIO_INIT_MASK             (XWAY_MDIO_INIT_LSTC | \
  40                                          XWAY_MDIO_INIT_ADSC)
  41
  42 #define ADVERTISED_MPD                  BIT(10) /* Multi-port device */
  43
  44 /* LED Configuration */
  45 #define XWAY_MMD_LEDCH                  0x01E0
  46 /* Inverse of SCAN Function */
  47 #define  XWAY_MMD_LEDCH_NACS_NONE       0x0000
  48 #define  XWAY_MMD_LEDCH_NACS_LINK       0x0001
  49 #define  XWAY_MMD_LEDCH_NACS_PDOWN      0x0002
  50 #define  XWAY_MMD_LEDCH_NACS_EEE        0x0003
  51 #define  XWAY_MMD_LEDCH_NACS_ANEG       0x0004
  52 #define  XWAY_MMD_LEDCH_NACS_ABIST      0x0005
  53 #define  XWAY_MMD_LEDCH_NACS_CDIAG      0x0006
  54 #define  XWAY_MMD_LEDCH_NACS_TEST       0x0007
  55 /* Slow Blink Frequency */
  56 #define  XWAY_MMD_LEDCH_SBF_F02HZ       0x0000
  57 #define  XWAY_MMD_LEDCH_SBF_F04HZ       0x0010
  58 #define  XWAY_MMD_LEDCH_SBF_F08HZ       0x0020
  59 #define  XWAY_MMD_LEDCH_SBF_F16HZ       0x0030
  60 /* Fast Blink Frequency */
  61 #define  XWAY_MMD_LEDCH_FBF_F02HZ       0x0000
  62 #define  XWAY_MMD_LEDCH_FBF_F04HZ       0x0040
  63 #define  XWAY_MMD_LEDCH_FBF_F08HZ       0x0080
  64 #define  XWAY_MMD_LEDCH_FBF_F16HZ       0x00C0
  65 /* LED Configuration */
  66 #define XWAY_MMD_LEDCL                  0x01E1
  67 /* Complex Blinking Configuration */
  68 #define  XWAY_MMD_LEDCH_CBLINK_NONE     0x0000
  69 #define  XWAY_MMD_LEDCH_CBLINK_LINK     0x0001
  70 #define  XWAY_MMD_LEDCH_CBLINK_PDOWN    0x0002
  71 #define  XWAY_MMD_LEDCH_CBLINK_EEE      0x0003
  72 #define  XWAY_MMD_LEDCH_CBLINK_ANEG     0x0004
  73 #define  XWAY_MMD_LEDCH_CBLINK_ABIST    0x0005
  74 #define  XWAY_MMD_LEDCH_CBLINK_CDIAG    0x0006
  75 #define  XWAY_MMD_LEDCH_CBLINK_TEST     0x0007
  76 /* Complex SCAN Configuration */
  77 #define  XWAY_MMD_LEDCH_SCAN_NONE       0x0000
  78 #define  XWAY_MMD_LEDCH_SCAN_LINK       0x0010
  79 #define  XWAY_MMD_LEDCH_SCAN_PDOWN      0x0020
  80 #define  XWAY_MMD_LEDCH_SCAN_EEE        0x0030
  81 #define  XWAY_MMD_LEDCH_SCAN_ANEG       0x0040
  82 #define  XWAY_MMD_LEDCH_SCAN_ABIST      0x0050
  83 #define  XWAY_MMD_LEDCH_SCAN_CDIAG      0x0060
  84 #define  XWAY_MMD_LEDCH_SCAN_TEST       0x0070
  85 /* Configuration for LED Pin x */
  86 #define XWAY_MMD_LED0H                  0x01E2
  87 /* Fast Blinking Configuration */
  88 #define  XWAY_MMD_LEDxH_BLINKF_MASK     0x000F
  89 #define  XWAY_MMD_LEDxH_BLINKF_NONE     0x0000
  90 #define  XWAY_MMD_LEDxH_BLINKF_LINK10   0x0001
  91 #define  XWAY_MMD_LEDxH_BLINKF_LINK100  0x0002
  92 #define  XWAY_MMD_LEDxH_BLINKF_LINK10X  0x0003
  93 #define  XWAY_MMD_LEDxH_BLINKF_LINK1000 0x0004
  94 #define  XWAY_MMD_LEDxH_BLINKF_LINK10_0 0x0005
  95 #define  XWAY_MMD_LEDxH_BLINKF_LINK100X 0x0006
  96 #define  XWAY_MMD_LEDxH_BLINKF_LINK10XX 0x0007
  97 #define  XWAY_MMD_LEDxH_BLINKF_PDOWN    0x0008
  98 #define  XWAY_MMD_LEDxH_BLINKF_EEE      0x0009
  99 #define  XWAY_MMD_LEDxH_BLINKF_ANEG     0x000A
 100 #define  XWAY_MMD_LEDxH_BLINKF_ABIST    0x000B
 101 #define  XWAY_MMD_LEDxH_BLINKF_CDIAG    0x000C
 102 /* Constant On Configuration */
 103 #define  XWAY_MMD_LEDxH_CON_MASK        0x00F0
 104 #define  XWAY_MMD_LEDxH_CON_NONE        0x0000
 105 #define  XWAY_MMD_LEDxH_CON_LINK10      0x0010
 106 #define  XWAY_MMD_LEDxH_CON_LINK100     0x0020
 107 #define  XWAY_MMD_LEDxH_CON_LINK10X     0x0030
 108 #define  XWAY_MMD_LEDxH_CON_LINK1000    0x0040
 109 #define  XWAY_MMD_LEDxH_CON_LINK10_0    0x0050
 110 #define  XWAY_MMD_LEDxH_CON_LINK100X    0x0060
 111 #define  XWAY_MMD_LEDxH_CON_LINK10XX    0x0070
 112 #define  XWAY_MMD_LEDxH_CON_PDOWN       0x0080
 113 #define  XWAY_MMD_LEDxH_CON_EEE         0x0090
 114 #define  XWAY_MMD_LEDxH_CON_ANEG        0x00A0
 115 #define  XWAY_MMD_LEDxH_CON_ABIST       0x00B0
 116 #define  XWAY_MMD_LEDxH_CON_CDIAG       0x00C0
 117 #define  XWAY_MMD_LEDxH_CON_COPPER      0x00D0
 118 #define  XWAY_MMD_LEDxH_CON_FIBER       0x00E0
 119 /* Configuration for LED Pin x */
 120 #define XWAY_MMD_LED0L                  0x01E3
 121 /* Pulsing Configuration */
 122 #define  XWAY_MMD_LEDxL_PULSE_MASK      0x000F
 123 #define  XWAY_MMD_LEDxL_PULSE_NONE      0x0000
 124 #define  XWAY_MMD_LEDxL_PULSE_TXACT     0x0001
 125 #define  XWAY_MMD_LEDxL_PULSE_RXACT     0x0002
 126 #define  XWAY_MMD_LEDxL_PULSE_COL       0x0004
 127 /* Slow Blinking Configuration */
 128 #define  XWAY_MMD_LEDxL_BLINKS_MASK     0x00F0
 129 #define  XWAY_MMD_LEDxL_BLINKS_NONE     0x0000
 130 #define  XWAY_MMD_LEDxL_BLINKS_LINK10   0x0010
 131 #define  XWAY_MMD_LEDxL_BLINKS_LINK100  0x0020
 132 #define  XWAY_MMD_LEDxL_BLINKS_LINK10X  0x0030
 133 #define  XWAY_MMD_LEDxL_BLINKS_LINK1000 0x0040
 134 #define  XWAY_MMD_LEDxL_BLINKS_LINK10_0 0x0050
 135 #define  XWAY_MMD_LEDxL_BLINKS_LINK100X 0x0060
 136 #define  XWAY_MMD_LEDxL_BLINKS_LINK10XX 0x0070
 137 #define  XWAY_MMD_LEDxL_BLINKS_PDOWN    0x0080
 138 #define  XWAY_MMD_LEDxL_BLINKS_EEE      0x0090
 139 #define  XWAY_MMD_LEDxL_BLINKS_ANEG     0x00A0
 140 #define  XWAY_MMD_LEDxL_BLINKS_ABIST    0x00B0
 141 #define  XWAY_MMD_LEDxL_BLINKS_CDIAG    0x00C0
 142 #define XWAY_MMD_LED1H                  0x01E4
 143 #define XWAY_MMD_LED1L                  0x01E5
 144 #define XWAY_MMD_LED2H                  0x01E6
 145 #define XWAY_MMD_LED2L                  0x01E7
 146 #define XWAY_MMD_LED3H                  0x01E8
 147 #define XWAY_MMD_LED3L                  0x01E9
 148
 149 #define PHY_ID_PHY11G_1_3               0x030260D1
 150 #define PHY_ID_PHY22F_1_3               0x030260E1
 151 #define PHY_ID_PHY11G_1_4               0xD565A400
 152 #define PHY_ID_PHY22F_1_4               0xD565A410
 153 #define PHY_ID_PHY11G_1_5               0xD565A401
 154 #define PHY_ID_PHY22F_1_5               0xD565A411
 155 #define PHY_ID_PHY11G_VR9_1_1           0xD565A408
 156 #define PHY_ID_PHY22F_VR9_1_1           0xD565A418
 157 #define PHY_ID_PHY11G_VR9_1_2           0xD565A409
 158 #define PHY_ID_PHY22F_VR9_1_2           0xD565A419
 159
 160 static int xway_gphy_config_init(struct phy_device *phydev)
 161 {
 162         int err;
 163         u32 ledxh;
 164         u32 ledxl;
 165
 166         /* Mask all interrupts */
 167         err = phy_write(phydev, XWAY_MDIO_IMASK, 0);
 168         if (err)
 169                 return err;
 170
 171         /* Clear all pending interrupts */
 172         phy_read(phydev, XWAY_MDIO_ISTAT);
 173
 174         /* Ensure that integrated led function is enabled for all leds */
 175         err = phy_write(phydev, XWAY_MDIO_LED,
 176                         XWAY_MDIO_LED_LED0_EN |
 177                         XWAY_MDIO_LED_LED1_EN |
 178                         XWAY_MDIO_LED_LED2_EN |
 179                         XWAY_MDIO_LED_LED3_EN);
 180         if (err)
 181                 return err;
 182
 183         phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCH,
 184                       XWAY_MMD_LEDCH_NACS_NONE |
 185                       XWAY_MMD_LEDCH_SBF_F02HZ |
 186                       XWAY_MMD_LEDCH_FBF_F16HZ);
 187         phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCL,
 188                       XWAY_MMD_LEDCH_CBLINK_NONE |
 189                       XWAY_MMD_LEDCH_SCAN_NONE);
 190
 191         /**
 192          * In most cases only one LED is connected to this phy, so
 193          * configure them all to constant on and pulse mode. LED3 is
 194          * only available in some packages, leave it in its reset
 195          * configuration.
 196          */
 197         ledxh = XWAY_MMD_LEDxH_BLINKF_NONE | XWAY_MMD_LEDxH_CON_LINK10XX;
 198         ledxl = XWAY_MMD_LEDxL_PULSE_TXACT | XWAY_MMD_LEDxL_PULSE_RXACT |
 199                 XWAY_MMD_LEDxL_BLINKS_NONE;
 200         phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0H, ledxh);
 201         phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0L, ledxl);
 202         phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1H, ledxh);
 203         phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1L, ledxl);
 204         phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh);
 205         phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl);
 206
 207         return 0;
 208 }
 209
 210 static int xway_gphy14_config_aneg(struct phy_device *phydev)
 211 {
 212         int reg, err;
 213
 214         /* Advertise as multi-port device, see IEEE802.3-2002 40.5.1.1 */
 215         /* This is a workaround for an errata in rev < 1.5 devices */
 216         reg = phy_read(phydev, MII_CTRL1000);
 217         reg |= ADVERTISED_MPD;
 218         err = phy_write(phydev, MII_CTRL1000, reg);
 219         if (err)
 220                 return err;
 221
 222         return genphy_config_aneg(phydev);
 223 }
 224
 225 static int xway_gphy_ack_interrupt(struct phy_device *phydev)
 226 {
 227         int reg;
 228
 229         reg = phy_read(phydev, XWAY_MDIO_ISTAT);
 230         return (reg < 0) ? reg : 0;
 231 }
 232
 233 static int xway_gphy_did_interrupt(struct phy_device *phydev)
 234 {
 235         int reg;
 236
 237         reg = phy_read(phydev, XWAY_MDIO_ISTAT);
 238         return reg & XWAY_MDIO_INIT_MASK;
 239 }
 240
 241 static int xway_gphy_config_intr(struct phy_device *phydev)
 242 {
 243         u16 mask = 0;
 244
 245         if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 246                 mask = XWAY_MDIO_INIT_MASK;
 247
 248         return phy_write(phydev, XWAY_MDIO_IMASK, mask);
 249 }
 250
 251 static struct phy_driver xway_gphy[] = {
 252         {
 253                 .phy_id         = PHY_ID_PHY11G_1_3,
 254                 .phy_id_mask    = 0xffffffff,
 255                 .name           = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.3",
 256                 /* PHY_GBIT_FEATURES */
 257                 .config_init    = xway_gphy_config_init,
 258                 .config_aneg    = xway_gphy14_config_aneg,
 259                 .ack_interrupt  = xway_gphy_ack_interrupt,
 260                 .did_interrupt  = xway_gphy_did_interrupt,
 261                 .config_intr    = xway_gphy_config_intr,
 262                 .suspend        = genphy_suspend,
 263                 .resume         = genphy_resume,
 264         }, {
 265                 .phy_id         = PHY_ID_PHY22F_1_3,
 266                 .phy_id_mask    = 0xffffffff,
 267                 .name           = "Intel XWAY PHY22F (PEF 7061) v1.3",
 268                 /* PHY_BASIC_FEATURES */
 269                 .config_init    = xway_gphy_config_init,
 270                 .config_aneg    = xway_gphy14_config_aneg,
 271                 .ack_interrupt  = xway_gphy_ack_interrupt,
 272                 .did_interrupt  = xway_gphy_did_interrupt,
 273                 .config_intr    = xway_gphy_config_intr,
 274                 .suspend        = genphy_suspend,
 275                 .resume         = genphy_resume,
 276         }, {
 277                 .phy_id         = PHY_ID_PHY11G_1_4,
 278                 .phy_id_mask    = 0xffffffff,
 279                 .name           = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4",
 280                 /* PHY_GBIT_FEATURES */
 281                 .config_init    = xway_gphy_config_init,
 282                 .config_aneg    = xway_gphy14_config_aneg,
 283                 .ack_interrupt  = xway_gphy_ack_interrupt,
 284                 .did_interrupt  = xway_gphy_did_interrupt,
 285                 .config_intr    = xway_gphy_config_intr,
 286                 .suspend        = genphy_suspend,
 287                 .resume         = genphy_resume,
 288         }, {
 289                 .phy_id         = PHY_ID_PHY22F_1_4,
 290                 .phy_id_mask    = 0xffffffff,
 291                 .name           = "Intel XWAY PHY22F (PEF 7061) v1.4",
 292                 /* PHY_BASIC_FEATURES */
 293                 .config_init    = xway_gphy_config_init,
 294                 .config_aneg    = xway_gphy14_config_aneg,
 295                 .ack_interrupt  = xway_gphy_ack_interrupt,
 296                 .did_interrupt  = xway_gphy_did_interrupt,
 297                 .config_intr    = xway_gphy_config_intr,
 298                 .suspend        = genphy_suspend,
 299                 .resume         = genphy_resume,
 300         }, {
 301                 .phy_id         = PHY_ID_PHY11G_1_5,
 302                 .phy_id_mask    = 0xffffffff,
 303                 .name           = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6",
 304                 /* PHY_GBIT_FEATURES */
 305                 .config_init    = xway_gphy_config_init,
 306                 .ack_interrupt  = xway_gphy_ack_interrupt,
 307                 .did_interrupt  = xway_gphy_did_interrupt,
 308                 .config_intr    = xway_gphy_config_intr,
 309                 .suspend        = genphy_suspend,
 310                 .resume         = genphy_resume,
 311         }, {
 312                 .phy_id         = PHY_ID_PHY22F_1_5,
 313                 .phy_id_mask    = 0xffffffff,
 314                 .name           = "Intel XWAY PHY22F (PEF 7061) v1.5 / v1.6",
 315                 /* PHY_BASIC_FEATURES */
 316                 .config_init    = xway_gphy_config_init,
 317                 .ack_interrupt  = xway_gphy_ack_interrupt,
 318                 .did_interrupt  = xway_gphy_did_interrupt,
 319                 .config_intr    = xway_gphy_config_intr,
 320                 .suspend        = genphy_suspend,
 321                 .resume         = genphy_resume,
 322         }, {
 323                 .phy_id         = PHY_ID_PHY11G_VR9_1_1,
 324                 .phy_id_mask    = 0xffffffff,
 325                 .name           = "Intel XWAY PHY11G (xRX v1.1 integrated)",
 326                 /* PHY_GBIT_FEATURES */
 327                 .config_init    = xway_gphy_config_init,
 328                 .ack_interrupt  = xway_gphy_ack_interrupt,
 329                 .did_interrupt  = xway_gphy_did_interrupt,
 330                 .config_intr    = xway_gphy_config_intr,
 331                 .suspend        = genphy_suspend,
 332                 .resume         = genphy_resume,
 333         }, {
 334                 .phy_id         = PHY_ID_PHY22F_VR9_1_1,
 335                 .phy_id_mask    = 0xffffffff,
 336                 .name           = "Intel XWAY PHY22F (xRX v1.1 integrated)",
 337                 /* PHY_BASIC_FEATURES */
 338                 .config_init    = xway_gphy_config_init,
 339                 .ack_interrupt  = xway_gphy_ack_interrupt,
 340                 .did_interrupt  = xway_gphy_did_interrupt,
 341                 .config_intr    = xway_gphy_config_intr,
 342                 .suspend        = genphy_suspend,
 343                 .resume         = genphy_resume,
 344         }, {
 345                 .phy_id         = PHY_ID_PHY11G_VR9_1_2,
 346                 .phy_id_mask    = 0xffffffff,
 347                 .name           = "Intel XWAY PHY11G (xRX v1.2 integrated)",
 348                 /* PHY_GBIT_FEATURES */
 349                 .config_init    = xway_gphy_config_init,
 350                 .ack_interrupt  = xway_gphy_ack_interrupt,
 351                 .did_interrupt  = xway_gphy_did_interrupt,
 352                 .config_intr    = xway_gphy_config_intr,
 353                 .suspend        = genphy_suspend,
 354                 .resume         = genphy_resume,
 355         }, {
 356                 .phy_id         = PHY_ID_PHY22F_VR9_1_2,
 357                 .phy_id_mask    = 0xffffffff,
 358                 .name           = "Intel XWAY PHY22F (xRX v1.2 integrated)",
 359                 /* PHY_BASIC_FEATURES */
 360                 .config_init    = xway_gphy_config_init,
 361                 .ack_interrupt  = xway_gphy_ack_interrupt,
 362                 .did_interrupt  = xway_gphy_did_interrupt,
 363                 .config_intr    = xway_gphy_config_intr,
 364                 .suspend        = genphy_suspend,
 365                 .resume         = genphy_resume,
 366         },
 367 };
 368 module_phy_driver(xway_gphy);
 369
 370 static struct mdio_device_id __maybe_unused xway_gphy_tbl[] = {
 371         { PHY_ID_PHY11G_1_3, 0xffffffff },
 372         { PHY_ID_PHY22F_1_3, 0xffffffff },
 373         { PHY_ID_PHY11G_1_4, 0xffffffff },
 374         { PHY_ID_PHY22F_1_4, 0xffffffff },
 375         { PHY_ID_PHY11G_1_5, 0xffffffff },
 376         { PHY_ID_PHY22F_1_5, 0xffffffff },
 377         { PHY_ID_PHY11G_VR9_1_1, 0xffffffff },
 378         { PHY_ID_PHY22F_VR9_1_1, 0xffffffff },
 379         { PHY_ID_PHY11G_VR9_1_2, 0xffffffff },
 380         { PHY_ID_PHY22F_VR9_1_2, 0xffffffff },
 381         { }
 382 };
 383 MODULE_DEVICE_TABLE(mdio, xway_gphy_tbl);
 384
 385 MODULE_DESCRIPTION("Intel XWAY PHY driver");
 386 MODULE_LICENSE("GPL");