drivers/net/phy/et1011c.c

   1 /*
   2  * drivers/net/phy/et1011c.c
   3  *
   4  * Driver for LSI ET1011C PHYs
   5  *
   6  * Author: Chaithrika U S
   7  *
   8  * Copyright (c) 2008 Texas Instruments
   9  *
  10  * This program is free software; you can redistribute  it and/or modify it
  11  * under  the terms of  the GNU General  Public License as published by the
  12  * Free Software Foundation;  either version 2 of the  License, or (at your
  13  * option) any later version.
  14  *
  15  */
  16 #include <linux/kernel.h>
  17 #include <linux/string.h>
  18 #include <linux/errno.h>
  19 #include <linux/unistd.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/init.h>
  22 #include <linux/delay.h>
  23 #include <linux/netdevice.h>
  24 #include <linux/etherdevice.h>
  25 #include <linux/skbuff.h>
  26 #include <linux/spinlock.h>
  27 #include <linux/mm.h>
  28 #include <linux/module.h>
  29 #include <linux/mii.h>
  30 #include <linux/ethtool.h>
  31 #include <linux/phy.h>
  32 #include <linux/io.h>
  33 #include <linux/uaccess.h>
  34 #include <asm/irq.h>
  35
  36 #define ET1011C_STATUS_REG      (0x1A)
  37 #define ET1011C_CONFIG_REG      (0x16)
  38 #define ET1011C_SPEED_MASK              (0x0300)
  39 #define ET1011C_GIGABIT_SPEED           (0x0200)
  40 #define ET1011C_TX_FIFO_MASK            (0x3000)
  41 #define ET1011C_TX_FIFO_DEPTH_8         (0x0000)
  42 #define ET1011C_TX_FIFO_DEPTH_16        (0x1000)
  43 #define ET1011C_INTERFACE_MASK          (0x0007)
  44 #define ET1011C_GMII_INTERFACE          (0x0002)
  45 #define ET1011C_SYS_CLK_EN              (0x01 << 4)
  46
  47
  48 MODULE_DESCRIPTION("LSI ET1011C PHY driver");
  49 MODULE_AUTHOR("Chaithrika U S");
  50 MODULE_LICENSE("GPL");
  51
  52 static int et1011c_config_aneg(struct phy_device *phydev)
  53 {
  54         int ctl = 0;
  55         ctl = phy_read(phydev, MII_BMCR);
  56         if (ctl < 0)
  57                 return ctl;
  58         ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 |
  59                  BMCR_ANENABLE);
  60         /* First clear the PHY */
  61         phy_write(phydev, MII_BMCR, ctl | BMCR_RESET);
  62
  63         return genphy_config_aneg(phydev);
  64 }
  65
  66 static int et1011c_read_status(struct phy_device *phydev)
  67 {
  68         int ret;
  69         u32 val;
  70         static int speed;
  71         ret = genphy_read_status(phydev);
  72
  73         if (speed != phydev->speed) {
  74                 speed = phydev->speed;
  75                 val = phy_read(phydev, ET1011C_STATUS_REG);
  76                 if ((val & ET1011C_SPEED_MASK) ==
  77                                         ET1011C_GIGABIT_SPEED) {
  78                         val = phy_read(phydev, ET1011C_CONFIG_REG);
  79                         val &= ~ET1011C_TX_FIFO_MASK;
  80                         phy_write(phydev, ET1011C_CONFIG_REG, val\
  81                                         | ET1011C_GMII_INTERFACE\
  82                                         | ET1011C_SYS_CLK_EN\
  83                                         | ET1011C_TX_FIFO_DEPTH_16);
  84
  85                 }
  86         }
  87         return ret;
  88 }
  89
  90 static struct phy_driver et1011c_driver[] = { {
  91         .phy_id         = 0x0282f014,
  92         .name           = "ET1011C",
  93         .phy_id_mask    = 0xfffffff0,
  94         .features       = (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full),
  95         .flags          = PHY_POLL,
  96         .config_aneg    = et1011c_config_aneg,
  97         .read_status    = et1011c_read_status,
  98 } };
  99
 100 module_phy_driver(et1011c_driver);
 101
 102 static struct mdio_device_id __maybe_unused et1011c_tbl[] = {
 103         { 0x0282f014, 0xfffffff0 },
 104         { }
 105 };
 106
 107 MODULE_DEVICE_TABLE(mdio, et1011c_tbl);