drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /* 10G controller driver for Samsung SoCs
   3  *
   4  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Author: Siva Reddy Kallam <siva.kallam@samsung.com>
   8  */
   9
  10 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  11
  12 #include <linux/clk.h>
  13 #include <linux/crc32.h>
  14 #include <linux/dma-mapping.h>
  15 #include <linux/etherdevice.h>
  16 #include <linux/ethtool.h>
  17 #include <linux/if.h>
  18 #include <linux/if_ether.h>
  19 #include <linux/if_vlan.h>
  20 #include <linux/init.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/ip.h>
  23 #include <linux/kernel.h>
  24 #include <linux/mii.h>
  25 #include <linux/module.h>
  26 #include <linux/net_tstamp.h>
  27 #include <linux/netdevice.h>
  28 #include <linux/phy.h>
  29 #include <linux/platform_device.h>
  30 #include <linux/prefetch.h>
  31 #include <linux/skbuff.h>
  32 #include <linux/slab.h>
  33 #include <linux/tcp.h>
  34 #include <linux/sxgbe_platform.h>
  35
  36 #include "sxgbe_common.h"
  37 #include "sxgbe_desc.h"
  38 #include "sxgbe_dma.h"
  39 #include "sxgbe_mtl.h"
  40 #include "sxgbe_reg.h"
  41
  42 #define SXGBE_ALIGN(x)  L1_CACHE_ALIGN(x)
  43 #define JUMBO_LEN       9000
  44
  45 /* Module parameters */
  46 #define TX_TIMEO        5000
  47 #define DMA_TX_SIZE     512
  48 #define DMA_RX_SIZE     1024
  49 #define TC_DEFAULT      64
  50 #define DMA_BUFFER_SIZE BUF_SIZE_2KiB
  51 /* The default timer value as per the sxgbe specification 1 sec(1000 ms) */
  52 #define SXGBE_DEFAULT_LPI_TIMER 1000
  53
  54 static int debug = -1;
  55 static int eee_timer = SXGBE_DEFAULT_LPI_TIMER;
  56
  57 module_param(eee_timer, int, 0644);
  58
  59 module_param(debug, int, 0644);
  60 static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
  61                                       NETIF_MSG_LINK | NETIF_MSG_IFUP |
  62                                       NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
  63
  64 static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id);
  65 static irqreturn_t sxgbe_tx_interrupt(int irq, void *dev_id);
  66 static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id);
  67
  68 #define SXGBE_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x))
  69
  70 #define SXGBE_LPI_TIMER(x) (jiffies + msecs_to_jiffies(x))
  71
  72 /**
  73  * sxgbe_verify_args - verify the driver parameters.
  74  * Description: it verifies if some wrong parameter is passed to the driver.
  75  * Note that wrong parameters are replaced with the default values.
  76  */
  77 static void sxgbe_verify_args(void)
  78 {
  79         if (unlikely(eee_timer < 0))
  80                 eee_timer = SXGBE_DEFAULT_LPI_TIMER;
  81 }
  82
  83 static void sxgbe_enable_eee_mode(const struct sxgbe_priv_data *priv)
  84 {
  85         /* Check and enter in LPI mode */
  86         if (!priv->tx_path_in_lpi_mode)
  87                 priv->hw->mac->set_eee_mode(priv->ioaddr);
  88 }
  89
  90 void sxgbe_disable_eee_mode(struct sxgbe_priv_data * const priv)
  91 {
  92         /* Exit and disable EEE in case of we are in LPI state. */
  93         priv->hw->mac->reset_eee_mode(priv->ioaddr);
  94         del_timer_sync(&priv->eee_ctrl_timer);
  95         priv->tx_path_in_lpi_mode = false;
  96 }
  97
  98 /**
  99  * sxgbe_eee_ctrl_timer
 100  * @t: timer list containing a data
 101  * Description:
 102  *  If there is no data transfer and if we are not in LPI state,
 103  *  then MAC Transmitter can be moved to LPI state.
 104  */
 105 static void sxgbe_eee_ctrl_timer(struct timer_list *t)
 106 {
 107         struct sxgbe_priv_data *priv = from_timer(priv, t, eee_ctrl_timer);
 108
 109         sxgbe_enable_eee_mode(priv);
 110         mod_timer(&priv->eee_ctrl_timer, SXGBE_LPI_TIMER(eee_timer));
 111 }
 112
 113 /**
 114  * sxgbe_eee_init
 115  * @priv: private device pointer
 116  * Description:
 117  *  If the EEE support has been enabled while configuring the driver,
 118  *  if the GMAC actually supports the EEE (from the HW cap reg) and the
 119  *  phy can also manage EEE, so enable the LPI state and start the timer
 120  *  to verify if the tx path can enter in LPI state.
 121  */
 122 bool sxgbe_eee_init(struct sxgbe_priv_data * const priv)
 123 {
 124         struct net_device *ndev = priv->dev;
 125         bool ret = false;
 126
 127         /* MAC core supports the EEE feature. */
 128         if (priv->hw_cap.eee) {
 129                 /* Check if the PHY supports EEE */
 130                 if (phy_init_eee(ndev->phydev, true))
 131                         return false;
 132
 133                 priv->eee_active = 1;
 134                 timer_setup(&priv->eee_ctrl_timer, sxgbe_eee_ctrl_timer, 0);
 135                 priv->eee_ctrl_timer.expires = SXGBE_LPI_TIMER(eee_timer);
 136                 add_timer(&priv->eee_ctrl_timer);
 137
 138                 priv->hw->mac->set_eee_timer(priv->ioaddr,
 139                                              SXGBE_DEFAULT_LPI_TIMER,
 140                                              priv->tx_lpi_timer);
 141
 142                 pr_info("Energy-Efficient Ethernet initialized\n");
 143
 144                 ret = true;
 145         }
 146
 147         return ret;
 148 }
 149
 150 static void sxgbe_eee_adjust(const struct sxgbe_priv_data *priv)
 151 {
 152         struct net_device *ndev = priv->dev;
 153
 154         /* When the EEE has been already initialised we have to
 155          * modify the PLS bit in the LPI ctrl & status reg according
 156          * to the PHY link status. For this reason.
 157          */
 158         if (priv->eee_enabled)
 159                 priv->hw->mac->set_eee_pls(priv->ioaddr, ndev->phydev->link);
 160 }
 161
 162 /**
 163  * sxgbe_clk_csr_set - dynamically set the MDC clock
 164  * @priv: driver private structure
 165  * Description: this is to dynamically set the MDC clock according to the csr
 166  * clock input.
 167  */
 168 static void sxgbe_clk_csr_set(struct sxgbe_priv_data *priv)
 169 {
 170         u32 clk_rate = clk_get_rate(priv->sxgbe_clk);
 171
 172         /* assign the proper divider, this will be used during
 173          * mdio communication
 174          */
 175         if (clk_rate < SXGBE_CSR_F_150M)
 176                 priv->clk_csr = SXGBE_CSR_100_150M;
 177         else if (clk_rate <= SXGBE_CSR_F_250M)
 178                 priv->clk_csr = SXGBE_CSR_150_250M;
 179         else if (clk_rate <= SXGBE_CSR_F_300M)
 180                 priv->clk_csr = SXGBE_CSR_250_300M;
 181         else if (clk_rate <= SXGBE_CSR_F_350M)
 182                 priv->clk_csr = SXGBE_CSR_300_350M;
 183         else if (clk_rate <= SXGBE_CSR_F_400M)
 184                 priv->clk_csr = SXGBE_CSR_350_400M;
 185         else if (clk_rate <= SXGBE_CSR_F_500M)
 186                 priv->clk_csr = SXGBE_CSR_400_500M;
 187 }
 188
 189 /* minimum number of free TX descriptors required to wake up TX process */
 190 #define SXGBE_TX_THRESH(x)      (x->dma_tx_size/4)
 191
 192 static inline u32 sxgbe_tx_avail(struct sxgbe_tx_queue *queue, int tx_qsize)
 193 {
 194         return queue->dirty_tx + tx_qsize - queue->cur_tx - 1;
 195 }
 196
 197 /**
 198  * sxgbe_adjust_link
 199  * @dev: net device structure
 200  * Description: it adjusts the link parameters.
 201  */
 202 static void sxgbe_adjust_link(struct net_device *dev)
 203 {
 204         struct sxgbe_priv_data *priv = netdev_priv(dev);
 205         struct phy_device *phydev = dev->phydev;
 206         u8 new_state = 0;
 207         u8 speed = 0xff;
 208
 209         if (!phydev)
 210                 return;
 211
 212         /* SXGBE is not supporting auto-negotiation and
 213          * half duplex mode. so, not handling duplex change
 214          * in this function. only handling speed and link status
 215          */
 216         if (phydev->link) {
 217                 if (phydev->speed != priv->speed) {
 218                         new_state = 1;
 219                         switch (phydev->speed) {
 220                         case SPEED_10000:
 221                                 speed = SXGBE_SPEED_10G;
 222                                 break;
 223                         case SPEED_2500:
 224                                 speed = SXGBE_SPEED_2_5G;
 225                                 break;
 226                         case SPEED_1000:
 227                                 speed = SXGBE_SPEED_1G;
 228                                 break;
 229                         default:
 230                                 netif_err(priv, link, dev,
 231                                           "Speed (%d) not supported\n",
 232                                           phydev->speed);
 233                         }
 234
 235                         priv->speed = phydev->speed;
 236                         priv->hw->mac->set_speed(priv->ioaddr, speed);
 237                 }
 238
 239                 if (!priv->oldlink) {
 240                         new_state = 1;
 241                         priv->oldlink = 1;
 242                 }
 243         } else if (priv->oldlink) {
 244                 new_state = 1;
 245                 priv->oldlink = 0;
 246                 priv->speed = SPEED_UNKNOWN;
 247         }
 248
 249         if (new_state & netif_msg_link(priv))
 250                 phy_print_status(phydev);
 251
 252         /* Alter the MAC settings for EEE */
 253         sxgbe_eee_adjust(priv);
 254 }
 255
 256 /**
 257  * sxgbe_init_phy - PHY initialization
 258  * @ndev: net device structure
 259  * Description: it initializes the driver's PHY state, and attaches the PHY
 260  * to the mac driver.
 261  *  Return value:
 262  *  0 on success
 263  */
 264 static int sxgbe_init_phy(struct net_device *ndev)
 265 {
 266         char phy_id_fmt[MII_BUS_ID_SIZE + 3];
 267         char bus_id[MII_BUS_ID_SIZE];
 268         struct phy_device *phydev;
 269         struct sxgbe_priv_data *priv = netdev_priv(ndev);
 270         int phy_iface = priv->plat->interface;
 271
 272         /* assign default link status */
 273         priv->oldlink = 0;
 274         priv->speed = SPEED_UNKNOWN;
 275         priv->oldduplex = DUPLEX_UNKNOWN;
 276
 277         if (priv->plat->phy_bus_name)
 278                 snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
 279                          priv->plat->phy_bus_name, priv->plat->bus_id);
 280         else
 281                 snprintf(bus_id, MII_BUS_ID_SIZE, "sxgbe-%x",
 282                          priv->plat->bus_id);
 283
 284         snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
 285                  priv->plat->phy_addr);
 286         netdev_dbg(ndev, "%s: trying to attach to %s\n", __func__, phy_id_fmt);
 287
 288         phydev = phy_connect(ndev, phy_id_fmt, &sxgbe_adjust_link, phy_iface);
 289
 290         if (IS_ERR(phydev)) {
 291                 netdev_err(ndev, "Could not attach to PHY\n");
 292                 return PTR_ERR(phydev);
 293         }
 294
 295         /* Stop Advertising 1000BASE Capability if interface is not GMII */
 296         if ((phy_iface == PHY_INTERFACE_MODE_MII) ||
 297             (phy_iface == PHY_INTERFACE_MODE_RMII))
 298                 phy_set_max_speed(phydev, SPEED_1000);
 299
 300         if (phydev->phy_id == 0) {
 301                 phy_disconnect(phydev);
 302                 return -ENODEV;
 303         }
 304
 305         netdev_dbg(ndev, "%s: attached to PHY (UID 0x%x) Link = %d\n",
 306                    __func__, phydev->phy_id, phydev->link);
 307
 308         return 0;
 309 }
 310
 311 /**
 312  * sxgbe_clear_descriptors: clear descriptors
 313  * @priv: driver private structure
 314  * Description: this function is called to clear the tx and rx descriptors
 315  * in case of both basic and extended descriptors are used.
 316  */
 317 static void sxgbe_clear_descriptors(struct sxgbe_priv_data *priv)
 318 {
 319         int i, j;
 320         unsigned int txsize = priv->dma_tx_size;
 321         unsigned int rxsize = priv->dma_rx_size;
 322
 323         /* Clear the Rx/Tx descriptors */
 324         for (j = 0; j < SXGBE_RX_QUEUES; j++) {
 325                 for (i = 0; i < rxsize; i++)
 326                         priv->hw->desc->init_rx_desc(&priv->rxq[j]->dma_rx[i],
 327                                                      priv->use_riwt, priv->mode,
 328                                                      (i == rxsize - 1));
 329         }
 330
 331         for (j = 0; j < SXGBE_TX_QUEUES; j++) {
 332                 for (i = 0; i < txsize; i++)
 333                         priv->hw->desc->init_tx_desc(&priv->txq[j]->dma_tx[i]);
 334         }
 335 }
 336
 337 static int sxgbe_init_rx_buffers(struct net_device *dev,
 338                                  struct sxgbe_rx_norm_desc *p, int i,
 339                                  unsigned int dma_buf_sz,
 340                                  struct sxgbe_rx_queue *rx_ring)
 341 {
 342         struct sxgbe_priv_data *priv = netdev_priv(dev);
 343         struct sk_buff *skb;
 344
 345         skb = __netdev_alloc_skb_ip_align(dev, dma_buf_sz, GFP_KERNEL);
 346         if (!skb)
 347                 return -ENOMEM;
 348
 349         rx_ring->rx_skbuff[i] = skb;
 350         rx_ring->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
 351                                                    dma_buf_sz, DMA_FROM_DEVICE);
 352
 353         if (dma_mapping_error(priv->device, rx_ring->rx_skbuff_dma[i])) {
 354                 netdev_err(dev, "%s: DMA mapping error\n", __func__);
 355                 dev_kfree_skb_any(skb);
 356                 return -EINVAL;
 357         }
 358
 359         p->rdes23.rx_rd_des23.buf2_addr = rx_ring->rx_skbuff_dma[i];
 360
 361         return 0;
 362 }
 363
 364 /**
 365  * sxgbe_free_rx_buffers - free what sxgbe_init_rx_buffers() allocated
 366  * @dev: net device structure
 367  * @p: dec pointer
 368  * @i: index
 369  * @dma_buf_sz: size
 370  * @rx_ring: ring to be freed
 371  *
 372  * Description:  this function initializes the DMA RX descriptor
 373  */
 374 static void sxgbe_free_rx_buffers(struct net_device *dev,
 375                                   struct sxgbe_rx_norm_desc *p, int i,
 376                                   unsigned int dma_buf_sz,
 377                                   struct sxgbe_rx_queue *rx_ring)
 378 {
 379         struct sxgbe_priv_data *priv = netdev_priv(dev);
 380
 381         kfree_skb(rx_ring->rx_skbuff[i]);
 382         dma_unmap_single(priv->device, rx_ring->rx_skbuff_dma[i],
 383                          dma_buf_sz, DMA_FROM_DEVICE);
 384 }
 385
 386 /**
 387  * init_tx_ring - init the TX descriptor ring
 388  * @dev: net device structure
 389  * @queue_no: queue
 390  * @tx_ring: ring to be initialised
 391  * @tx_rsize: ring size
 392  * Description:  this function initializes the DMA TX descriptor
 393  */
 394 static int init_tx_ring(struct device *dev, u8 queue_no,
 395                         struct sxgbe_tx_queue *tx_ring, int tx_rsize)
 396 {
 397         /* TX ring is not allcoated */
 398         if (!tx_ring) {
 399                 dev_err(dev, "No memory for TX queue of SXGBE\n");
 400                 return -ENOMEM;
 401         }
 402
 403         /* allocate memory for TX descriptors */
 404         tx_ring->dma_tx = dma_alloc_coherent(dev,
 405                                              tx_rsize * sizeof(struct sxgbe_tx_norm_desc),
 406                                              &tx_ring->dma_tx_phy, GFP_KERNEL);
 407         if (!tx_ring->dma_tx)
 408                 return -ENOMEM;
 409
 410         /* allocate memory for TX skbuff array */
 411         tx_ring->tx_skbuff_dma = devm_kcalloc(dev, tx_rsize,
 412                                               sizeof(dma_addr_t), GFP_KERNEL);
 413         if (!tx_ring->tx_skbuff_dma)
 414                 goto dmamem_err;
 415
 416         tx_ring->tx_skbuff = devm_kcalloc(dev, tx_rsize,
 417                                           sizeof(struct sk_buff *), GFP_KERNEL);
 418
 419         if (!tx_ring->tx_skbuff)
 420                 goto dmamem_err;
 421
 422         /* assign queue number */
 423         tx_ring->queue_no = queue_no;
 424
 425         /* initialise counters */
 426         tx_ring->dirty_tx = 0;
 427         tx_ring->cur_tx = 0;
 428
 429         return 0;
 430
 431 dmamem_err:
 432         dma_free_coherent(dev, tx_rsize * sizeof(struct sxgbe_tx_norm_desc),
 433                           tx_ring->dma_tx, tx_ring->dma_tx_phy);
 434         return -ENOMEM;
 435 }
 436
 437 /**
 438  * free_rx_ring - free the RX descriptor ring
 439  * @dev: net device structure
 440  * @rx_ring: ring to be initialised
 441  * @rx_rsize: ring size
 442  * Description:  this function initializes the DMA RX descriptor
 443  */
 444 static void free_rx_ring(struct device *dev, struct sxgbe_rx_queue *rx_ring,
 445                          int rx_rsize)
 446 {
 447         dma_free_coherent(dev, rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
 448                           rx_ring->dma_rx, rx_ring->dma_rx_phy);
 449         kfree(rx_ring->rx_skbuff_dma);
 450         kfree(rx_ring->rx_skbuff);
 451 }
 452
 453 /**
 454  * init_rx_ring - init the RX descriptor ring
 455  * @dev: net device structure
 456  * @queue_no: queue
 457  * @rx_ring: ring to be initialised
 458  * @rx_rsize: ring size
 459  * Description:  this function initializes the DMA RX descriptor
 460  */
 461 static int init_rx_ring(struct net_device *dev, u8 queue_no,
 462                         struct sxgbe_rx_queue *rx_ring, int rx_rsize)
 463 {
 464         struct sxgbe_priv_data *priv = netdev_priv(dev);
 465         int desc_index;
 466         unsigned int bfsize = 0;
 467         unsigned int ret = 0;
 468
 469         /* Set the max buffer size according to the MTU. */
 470         bfsize = ALIGN(dev->mtu + ETH_HLEN + ETH_FCS_LEN + NET_IP_ALIGN, 8);
 471
 472         netif_dbg(priv, probe, dev, "%s: bfsize %d\n", __func__, bfsize);
 473
 474         /* RX ring is not allcoated */
 475         if (rx_ring == NULL) {
 476                 netdev_err(dev, "No memory for RX queue\n");
 477                 return -ENOMEM;
 478         }
 479
 480         /* assign queue number */
 481         rx_ring->queue_no = queue_no;
 482
 483         /* allocate memory for RX descriptors */
 484         rx_ring->dma_rx = dma_alloc_coherent(priv->device,
 485                                              rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
 486                                              &rx_ring->dma_rx_phy, GFP_KERNEL);
 487
 488         if (rx_ring->dma_rx == NULL)
 489                 return -ENOMEM;
 490
 491         /* allocate memory for RX skbuff array */
 492         rx_ring->rx_skbuff_dma = kmalloc_array(rx_rsize,
 493                                                sizeof(dma_addr_t), GFP_KERNEL);
 494         if (!rx_ring->rx_skbuff_dma) {
 495                 ret = -ENOMEM;
 496                 goto err_free_dma_rx;
 497         }
 498
 499         rx_ring->rx_skbuff = kmalloc_array(rx_rsize,
 500                                            sizeof(struct sk_buff *), GFP_KERNEL);
 501         if (!rx_ring->rx_skbuff) {
 502                 ret = -ENOMEM;
 503                 goto err_free_skbuff_dma;
 504         }
 505
 506         /* initialise the buffers */
 507         for (desc_index = 0; desc_index < rx_rsize; desc_index++) {
 508                 struct sxgbe_rx_norm_desc *p;
 509                 p = rx_ring->dma_rx + desc_index;
 510                 ret = sxgbe_init_rx_buffers(dev, p, desc_index,
 511                                             bfsize, rx_ring);
 512                 if (ret)
 513                         goto err_free_rx_buffers;
 514         }
 515
 516         /* initialise counters */
 517         rx_ring->cur_rx = 0;
 518         rx_ring->dirty_rx = (unsigned int)(desc_index - rx_rsize);
 519         priv->dma_buf_sz = bfsize;
 520
 521         return 0;
 522
 523 err_free_rx_buffers:
 524         while (--desc_index >= 0) {
 525                 struct sxgbe_rx_norm_desc *p;
 526
 527                 p = rx_ring->dma_rx + desc_index;
 528                 sxgbe_free_rx_buffers(dev, p, desc_index, bfsize, rx_ring);
 529         }
 530         kfree(rx_ring->rx_skbuff);
 531 err_free_skbuff_dma:
 532         kfree(rx_ring->rx_skbuff_dma);
 533 err_free_dma_rx:
 534         dma_free_coherent(priv->device,
 535                           rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
 536                           rx_ring->dma_rx, rx_ring->dma_rx_phy);
 537
 538         return ret;
 539 }
 540 /**
 541  * free_tx_ring - free the TX descriptor ring
 542  * @dev: net device structure
 543  * @tx_ring: ring to be initialised
 544  * @tx_rsize: ring size
 545  * Description:  this function initializes the DMA TX descriptor
 546  */
 547 static void free_tx_ring(struct device *dev, struct sxgbe_tx_queue *tx_ring,
 548                          int tx_rsize)
 549 {
 550         dma_free_coherent(dev, tx_rsize * sizeof(struct sxgbe_tx_norm_desc),
 551                           tx_ring->dma_tx, tx_ring->dma_tx_phy);
 552 }
 553
 554 /**
 555  * init_dma_desc_rings - init the RX/TX descriptor rings
 556  * @netd: net device structure
 557  * Description:  this function initializes the DMA RX/TX descriptors
 558  * and allocates the socket buffers. It suppors the chained and ring
 559  * modes.
 560  */
 561 static int init_dma_desc_rings(struct net_device *netd)
 562 {
 563         int queue_num, ret;
 564         struct sxgbe_priv_data *priv = netdev_priv(netd);
 565         int tx_rsize = priv->dma_tx_size;
 566         int rx_rsize = priv->dma_rx_size;
 567
 568         /* Allocate memory for queue structures and TX descs */
 569         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
 570                 ret = init_tx_ring(priv->device, queue_num,
 571                                    priv->txq[queue_num], tx_rsize);
 572                 if (ret) {
 573                         dev_err(&netd->dev, "TX DMA ring allocation failed!\n");
 574                         goto txalloc_err;
 575                 }
 576
 577                 /* save private pointer in each ring this
 578                  * pointer is needed during cleaing TX queue
 579                  */
 580                 priv->txq[queue_num]->priv_ptr = priv;
 581         }
 582
 583         /* Allocate memory for queue structures and RX descs */
 584         SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
 585                 ret = init_rx_ring(netd, queue_num,
 586                                    priv->rxq[queue_num], rx_rsize);
 587                 if (ret) {
 588                         netdev_err(netd, "RX DMA ring allocation failed!!\n");
 589                         goto rxalloc_err;
 590                 }
 591
 592                 /* save private pointer in each ring this
 593                  * pointer is needed during cleaing TX queue
 594                  */
 595                 priv->rxq[queue_num]->priv_ptr = priv;
 596         }
 597
 598         sxgbe_clear_descriptors(priv);
 599
 600         return 0;
 601
 602 txalloc_err:
 603         while (queue_num--)
 604                 free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize);
 605         return ret;
 606
 607 rxalloc_err:
 608         while (queue_num--)
 609                 free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize);
 610         return ret;
 611 }
 612
 613 static void tx_free_ring_skbufs(struct sxgbe_tx_queue *txqueue)
 614 {
 615         int dma_desc;
 616         struct sxgbe_priv_data *priv = txqueue->priv_ptr;
 617         int tx_rsize = priv->dma_tx_size;
 618
 619         for (dma_desc = 0; dma_desc < tx_rsize; dma_desc++) {
 620                 struct sxgbe_tx_norm_desc *tdesc = txqueue->dma_tx + dma_desc;
 621
 622                 if (txqueue->tx_skbuff_dma[dma_desc])
 623                         dma_unmap_single(priv->device,
 624                                          txqueue->tx_skbuff_dma[dma_desc],
 625                                          priv->hw->desc->get_tx_len(tdesc),
 626                                          DMA_TO_DEVICE);
 627
 628                 dev_kfree_skb_any(txqueue->tx_skbuff[dma_desc]);
 629                 txqueue->tx_skbuff[dma_desc] = NULL;
 630                 txqueue->tx_skbuff_dma[dma_desc] = 0;
 631         }
 632 }
 633
 634
 635 static void dma_free_tx_skbufs(struct sxgbe_priv_data *priv)
 636 {
 637         int queue_num;
 638
 639         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
 640                 struct sxgbe_tx_queue *tqueue = priv->txq[queue_num];
 641                 tx_free_ring_skbufs(tqueue);
 642         }
 643 }
 644
 645 static void free_dma_desc_resources(struct sxgbe_priv_data *priv)
 646 {
 647         int queue_num;
 648         int tx_rsize = priv->dma_tx_size;
 649         int rx_rsize = priv->dma_rx_size;
 650
 651         /* Release the DMA TX buffers */
 652         dma_free_tx_skbufs(priv);
 653
 654         /* Release the TX ring memory also */
 655         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
 656                 free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize);
 657         }
 658
 659         /* Release the RX ring memory also */
 660         SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
 661                 free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize);
 662         }
 663 }
 664
 665 static int txring_mem_alloc(struct sxgbe_priv_data *priv)
 666 {
 667         int queue_num;
 668
 669         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
 670                 priv->txq[queue_num] = devm_kmalloc(priv->device,
 671                                                     sizeof(struct sxgbe_tx_queue), GFP_KERNEL);
 672                 if (!priv->txq[queue_num])
 673                         return -ENOMEM;
 674         }
 675
 676         return 0;
 677 }
 678
 679 static int rxring_mem_alloc(struct sxgbe_priv_data *priv)
 680 {
 681         int queue_num;
 682
 683         SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
 684                 priv->rxq[queue_num] = devm_kmalloc(priv->device,
 685                                                     sizeof(struct sxgbe_rx_queue), GFP_KERNEL);
 686                 if (!priv->rxq[queue_num])
 687                         return -ENOMEM;
 688         }
 689
 690         return 0;
 691 }
 692
 693 /**
 694  *  sxgbe_mtl_operation_mode - HW MTL operation mode
 695  *  @priv: driver private structure
 696  *  Description: it sets the MTL operation mode: tx/rx MTL thresholds
 697  *  or Store-And-Forward capability.
 698  */
 699 static void sxgbe_mtl_operation_mode(struct sxgbe_priv_data *priv)
 700 {
 701         int queue_num;
 702
 703         /* TX/RX threshold control */
 704         if (likely(priv->plat->force_sf_dma_mode)) {
 705                 /* set TC mode for TX QUEUES */
 706                 SXGBE_FOR_EACH_QUEUE(priv->hw_cap.tx_mtl_queues, queue_num)
 707                         priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, queue_num,
 708                                                        SXGBE_MTL_SFMODE);
 709                 priv->tx_tc = SXGBE_MTL_SFMODE;
 710
 711                 /* set TC mode for RX QUEUES */
 712                 SXGBE_FOR_EACH_QUEUE(priv->hw_cap.rx_mtl_queues, queue_num)
 713                         priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, queue_num,
 714                                                        SXGBE_MTL_SFMODE);
 715                 priv->rx_tc = SXGBE_MTL_SFMODE;
 716         } else if (unlikely(priv->plat->force_thresh_dma_mode)) {
 717                 /* set TC mode for TX QUEUES */
 718                 SXGBE_FOR_EACH_QUEUE(priv->hw_cap.tx_mtl_queues, queue_num)
 719                         priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, queue_num,
 720                                                        priv->tx_tc);
 721                 /* set TC mode for RX QUEUES */
 722                 SXGBE_FOR_EACH_QUEUE(priv->hw_cap.rx_mtl_queues, queue_num)
 723                         priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, queue_num,
 724                                                        priv->rx_tc);
 725         } else {
 726                 pr_err("ERROR: %s: Invalid TX threshold mode\n", __func__);
 727         }
 728 }
 729
 730 /**
 731  * sxgbe_tx_queue_clean:
 732  * @tqueue: queue pointer
 733  * Description: it reclaims resources after transmission completes.
 734  */
 735 static void sxgbe_tx_queue_clean(struct sxgbe_tx_queue *tqueue)
 736 {
 737         struct sxgbe_priv_data *priv = tqueue->priv_ptr;
 738         unsigned int tx_rsize = priv->dma_tx_size;
 739         struct netdev_queue *dev_txq;
 740         u8 queue_no = tqueue->queue_no;
 741
 742         dev_txq = netdev_get_tx_queue(priv->dev, queue_no);
 743
 744         __netif_tx_lock(dev_txq, smp_processor_id());
 745
 746         priv->xstats.tx_clean++;
 747         while (tqueue->dirty_tx != tqueue->cur_tx) {
 748                 unsigned int entry = tqueue->dirty_tx % tx_rsize;
 749                 struct sk_buff *skb = tqueue->tx_skbuff[entry];
 750                 struct sxgbe_tx_norm_desc *p;
 751
 752                 p = tqueue->dma_tx + entry;
 753
 754                 /* Check if the descriptor is owned by the DMA. */
 755                 if (priv->hw->desc->get_tx_owner(p))
 756                         break;
 757
 758                 if (netif_msg_tx_done(priv))
 759                         pr_debug("%s: curr %d, dirty %d\n",
 760                                  __func__, tqueue->cur_tx, tqueue->dirty_tx);
 761
 762                 if (likely(tqueue->tx_skbuff_dma[entry])) {
 763                         dma_unmap_single(priv->device,
 764                                          tqueue->tx_skbuff_dma[entry],
 765                                          priv->hw->desc->get_tx_len(p),
 766                                          DMA_TO_DEVICE);
 767                         tqueue->tx_skbuff_dma[entry] = 0;
 768                 }
 769
 770                 if (likely(skb)) {
 771                         dev_kfree_skb(skb);
 772                         tqueue->tx_skbuff[entry] = NULL;
 773                 }
 774
 775                 priv->hw->desc->release_tx_desc(p);
 776
 777                 tqueue->dirty_tx++;
 778         }
 779
 780         /* wake up queue */
 781         if (unlikely(netif_tx_queue_stopped(dev_txq) &&
 782             sxgbe_tx_avail(tqueue, tx_rsize) > SXGBE_TX_THRESH(priv))) {
 783                 if (netif_msg_tx_done(priv))
 784                         pr_debug("%s: restart transmit\n", __func__);
 785                 netif_tx_wake_queue(dev_txq);
 786         }
 787
 788         __netif_tx_unlock(dev_txq);
 789 }
 790
 791 /**
 792  * sxgbe_tx_all_clean:
 793  * @priv: driver private structure
 794  * Description: it reclaims resources after transmission completes.
 795  */
 796 static void sxgbe_tx_all_clean(struct sxgbe_priv_data * const priv)
 797 {
 798         u8 queue_num;
 799
 800         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
 801                 struct sxgbe_tx_queue *tqueue = priv->txq[queue_num];
 802
 803                 sxgbe_tx_queue_clean(tqueue);
 804         }
 805
 806         if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) {
 807                 sxgbe_enable_eee_mode(priv);
 808                 mod_timer(&priv->eee_ctrl_timer, SXGBE_LPI_TIMER(eee_timer));
 809         }
 810 }
 811
 812 /**
 813  * sxgbe_restart_tx_queue: irq tx error mng function
 814  * @priv: driver private structure
 815  * @queue_num: queue number
 816  * Description: it cleans the descriptors and restarts the transmission
 817  * in case of errors.
 818  */
 819 static void sxgbe_restart_tx_queue(struct sxgbe_priv_data *priv, int queue_num)
 820 {
 821         struct sxgbe_tx_queue *tx_ring = priv->txq[queue_num];
 822         struct netdev_queue *dev_txq = netdev_get_tx_queue(priv->dev,
 823                                                            queue_num);
 824
 825         /* stop the queue */
 826         netif_tx_stop_queue(dev_txq);
 827
 828         /* stop the tx dma */
 829         priv->hw->dma->stop_tx_queue(priv->ioaddr, queue_num);
 830
 831         /* free the skbuffs of the ring */
 832         tx_free_ring_skbufs(tx_ring);
 833
 834         /* initialise counters */
 835         tx_ring->cur_tx = 0;
 836         tx_ring->dirty_tx = 0;
 837
 838         /* start the tx dma */
 839         priv->hw->dma->start_tx_queue(priv->ioaddr, queue_num);
 840
 841         priv->dev->stats.tx_errors++;
 842
 843         /* wakeup the queue */
 844         netif_tx_wake_queue(dev_txq);
 845 }
 846
 847 /**
 848  * sxgbe_reset_all_tx_queues: irq tx error mng function
 849  * @priv: driver private structure
 850  * Description: it cleans all the descriptors and
 851  * restarts the transmission on all queues in case of errors.
 852  */
 853 static void sxgbe_reset_all_tx_queues(struct sxgbe_priv_data *priv)
 854 {
 855         int queue_num;
 856
 857         /* On TX timeout of net device, resetting of all queues
 858          * may not be proper way, revisit this later if needed
 859          */
 860         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num)
 861                 sxgbe_restart_tx_queue(priv, queue_num);
 862 }
 863
 864 /**
 865  * sxgbe_get_hw_features: get XMAC capabilities from the HW cap. register.
 866  * @priv: driver private structure
 867  * Description:
 868  *  new GMAC chip generations have a new register to indicate the
 869  *  presence of the optional feature/functions.
 870  *  This can be also used to override the value passed through the
 871  *  platform and necessary for old MAC10/100 and GMAC chips.
 872  */
 873 static int sxgbe_get_hw_features(struct sxgbe_priv_data * const priv)
 874 {
 875         int rval = 0;
 876         struct sxgbe_hw_features *features = &priv->hw_cap;
 877
 878         /* Read First Capability Register CAP[0] */
 879         rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 0);
 880         if (rval) {
 881                 features->pmt_remote_wake_up =
 882                         SXGBE_HW_FEAT_PMT_TEMOTE_WOP(rval);
 883                 features->pmt_magic_frame = SXGBE_HW_FEAT_PMT_MAGIC_PKT(rval);
 884                 features->atime_stamp = SXGBE_HW_FEAT_IEEE1500_2008(rval);
 885                 features->tx_csum_offload =
 886                         SXGBE_HW_FEAT_TX_CSUM_OFFLOAD(rval);
 887                 features->rx_csum_offload =
 888                         SXGBE_HW_FEAT_RX_CSUM_OFFLOAD(rval);
 889                 features->multi_macaddr = SXGBE_HW_FEAT_MACADDR_COUNT(rval);
 890                 features->tstamp_srcselect = SXGBE_HW_FEAT_TSTMAP_SRC(rval);
 891                 features->sa_vlan_insert = SXGBE_HW_FEAT_SRCADDR_VLAN(rval);
 892                 features->eee = SXGBE_HW_FEAT_EEE(rval);
 893         }
 894
 895         /* Read First Capability Register CAP[1] */
 896         rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 1);
 897         if (rval) {
 898                 features->rxfifo_size = SXGBE_HW_FEAT_RX_FIFO_SIZE(rval);
 899                 features->txfifo_size = SXGBE_HW_FEAT_TX_FIFO_SIZE(rval);
 900                 features->atstmap_hword = SXGBE_HW_FEAT_TX_FIFO_SIZE(rval);
 901                 features->dcb_enable = SXGBE_HW_FEAT_DCB(rval);
 902                 features->splithead_enable = SXGBE_HW_FEAT_SPLIT_HDR(rval);
 903                 features->tcpseg_offload = SXGBE_HW_FEAT_TSO(rval);
 904                 features->debug_mem = SXGBE_HW_FEAT_DEBUG_MEM_IFACE(rval);
 905                 features->rss_enable = SXGBE_HW_FEAT_RSS(rval);
 906                 features->hash_tsize = SXGBE_HW_FEAT_HASH_TABLE_SIZE(rval);
 907                 features->l3l4_filer_size = SXGBE_HW_FEAT_L3L4_FILTER_NUM(rval);
 908         }
 909
 910         /* Read First Capability Register CAP[2] */
 911         rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 2);
 912         if (rval) {
 913                 features->rx_mtl_queues = SXGBE_HW_FEAT_RX_MTL_QUEUES(rval);
 914                 features->tx_mtl_queues = SXGBE_HW_FEAT_TX_MTL_QUEUES(rval);
 915                 features->rx_dma_channels = SXGBE_HW_FEAT_RX_DMA_CHANNELS(rval);
 916                 features->tx_dma_channels = SXGBE_HW_FEAT_TX_DMA_CHANNELS(rval);
 917                 features->pps_output_count = SXGBE_HW_FEAT_PPS_OUTPUTS(rval);
 918                 features->aux_input_count = SXGBE_HW_FEAT_AUX_SNAPSHOTS(rval);
 919         }
 920
 921         return rval;
 922 }
 923
 924 /**
 925  * sxgbe_check_ether_addr: check if the MAC addr is valid
 926  * @priv: driver private structure
 927  * Description:
 928  * it is to verify if the MAC address is valid, in case of failures it
 929  * generates a random MAC address
 930  */
 931 static void sxgbe_check_ether_addr(struct sxgbe_priv_data *priv)
 932 {
 933         if (!is_valid_ether_addr(priv->dev->dev_addr)) {
 934                 u8 addr[ETH_ALEN];
 935
 936                 priv->hw->mac->get_umac_addr((void __iomem *)
 937                                              priv->ioaddr, addr, 0);
 938                 if (is_valid_ether_addr(addr))
 939                         eth_hw_addr_set(priv->dev, addr);
 940                 else
 941                         eth_hw_addr_random(priv->dev);
 942         }
 943         dev_info(priv->device, "device MAC address %pM\n",
 944                  priv->dev->dev_addr);
 945 }
 946
 947 /**
 948  * sxgbe_init_dma_engine: DMA init.
 949  * @priv: driver private structure
 950  * Description:
 951  * It inits the DMA invoking the specific SXGBE callback.
 952  * Some DMA parameters can be passed from the platform;
 953  * in case of these are not passed a default is kept for the MAC or GMAC.
 954  */
 955 static int sxgbe_init_dma_engine(struct sxgbe_priv_data *priv)
 956 {
 957         int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_map = 0;
 958         int queue_num;
 959
 960         if (priv->plat->dma_cfg) {
 961                 pbl = priv->plat->dma_cfg->pbl;
 962                 fixed_burst = priv->plat->dma_cfg->fixed_burst;
 963                 burst_map = priv->plat->dma_cfg->burst_map;
 964         }
 965
 966         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num)
 967                 priv->hw->dma->cha_init(priv->ioaddr, queue_num,
 968                                         fixed_burst, pbl,
 969                                         (priv->txq[queue_num])->dma_tx_phy,
 970                                         (priv->rxq[queue_num])->dma_rx_phy,
 971                                         priv->dma_tx_size, priv->dma_rx_size);
 972
 973         return priv->hw->dma->init(priv->ioaddr, fixed_burst, burst_map);
 974 }
 975
 976 /**
 977  * sxgbe_init_mtl_engine: MTL init.
 978  * @priv: driver private structure
 979  * Description:
 980  * It inits the MTL invoking the specific SXGBE callback.
 981  */
 982 static void sxgbe_init_mtl_engine(struct sxgbe_priv_data *priv)
 983 {
 984         int queue_num;
 985
 986         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
 987                 priv->hw->mtl->mtl_set_txfifosize(priv->ioaddr, queue_num,
 988                                                   priv->hw_cap.tx_mtl_qsize);
 989                 priv->hw->mtl->mtl_enable_txqueue(priv->ioaddr, queue_num);
 990         }
 991 }
 992
 993 /**
 994  * sxgbe_disable_mtl_engine: MTL disable.
 995  * @priv: driver private structure
 996  * Description:
 997  * It disables the MTL queues by invoking the specific SXGBE callback.
 998  */
 999 static void sxgbe_disable_mtl_engine(struct sxgbe_priv_data *priv)
1000 {
1001         int queue_num;
1002
1003         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num)
1004                 priv->hw->mtl->mtl_disable_txqueue(priv->ioaddr, queue_num);
1005 }
1006
1007
1008 /**
1009  * sxgbe_tx_timer: mitigation sw timer for tx.
1010  * @t: timer pointer
1011  * Description:
1012  * This is the timer handler to directly invoke the sxgbe_tx_clean.
1013  */
1014 static void sxgbe_tx_timer(struct timer_list *t)
1015 {
1016         struct sxgbe_tx_queue *p = from_timer(p, t, txtimer);
1017         sxgbe_tx_queue_clean(p);
1018 }
1019
1020 /**
1021  * sxgbe_tx_init_coalesce: init tx mitigation options.
1022  * @priv: driver private structure
1023  * Description:
1024  * This inits the transmit coalesce parameters: i.e. timer rate,
1025  * timer handler and default threshold used for enabling the
1026  * interrupt on completion bit.
1027  */
1028 static void sxgbe_tx_init_coalesce(struct sxgbe_priv_data *priv)
1029 {
1030         u8 queue_num;
1031
1032         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
1033                 struct sxgbe_tx_queue *p = priv->txq[queue_num];
1034                 p->tx_coal_frames =  SXGBE_TX_FRAMES;
1035                 p->tx_coal_timer = SXGBE_COAL_TX_TIMER;
1036                 timer_setup(&p->txtimer, sxgbe_tx_timer, 0);
1037                 p->txtimer.expires = SXGBE_COAL_TIMER(p->tx_coal_timer);
1038                 add_timer(&p->txtimer);
1039         }
1040 }
1041
1042 static void sxgbe_tx_del_timer(struct sxgbe_priv_data *priv)
1043 {
1044         u8 queue_num;
1045
1046         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
1047                 struct sxgbe_tx_queue *p = priv->txq[queue_num];
1048                 del_timer_sync(&p->txtimer);
1049         }
1050 }
1051
1052 /**
1053  *  sxgbe_open - open entry point of the driver
1054  *  @dev : pointer to the device structure.
1055  *  Description:
1056  *  This function is the open entry point of the driver.
1057  *  Return value:
1058  *  0 on success and an appropriate (-)ve integer as defined in errno.h
1059  *  file on failure.
1060  */
1061 static int sxgbe_open(struct net_device *dev)
1062 {
1063         struct sxgbe_priv_data *priv = netdev_priv(dev);
1064         int ret, queue_num;
1065
1066         clk_prepare_enable(priv->sxgbe_clk);
1067
1068         sxgbe_check_ether_addr(priv);
1069
1070         /* Init the phy */
1071         ret = sxgbe_init_phy(dev);
1072         if (ret) {
1073                 netdev_err(dev, "%s: Cannot attach to PHY (error: %d)\n",
1074                            __func__, ret);
1075                 goto phy_error;
1076         }
1077
1078         /* Create and initialize the TX/RX descriptors chains. */
1079         priv->dma_tx_size = SXGBE_ALIGN(DMA_TX_SIZE);
1080         priv->dma_rx_size = SXGBE_ALIGN(DMA_RX_SIZE);
1081         priv->dma_buf_sz = SXGBE_ALIGN(DMA_BUFFER_SIZE);
1082         priv->tx_tc = TC_DEFAULT;
1083         priv->rx_tc = TC_DEFAULT;
1084         init_dma_desc_rings(dev);
1085
1086         /* DMA initialization and SW reset */
1087         ret = sxgbe_init_dma_engine(priv);
1088         if (ret < 0) {
1089                 netdev_err(dev, "%s: DMA initialization failed\n", __func__);
1090                 goto init_error;
1091         }
1092
1093         /*  MTL initialization */
1094         sxgbe_init_mtl_engine(priv);
1095
1096         /* Copy the MAC addr into the HW  */
1097         priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
1098
1099         /* Initialize the MAC Core */
1100         priv->hw->mac->core_init(priv->ioaddr);
1101         SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
1102                 priv->hw->mac->enable_rxqueue(priv->ioaddr, queue_num);
1103         }
1104
1105         /* Request the IRQ lines */
1106         ret = devm_request_irq(priv->device, priv->irq, sxgbe_common_interrupt,
1107                                IRQF_SHARED, dev->name, dev);
1108         if (unlikely(ret < 0)) {
1109                 netdev_err(dev, "%s: ERROR: allocating the IRQ %d (error: %d)\n",
1110                            __func__, priv->irq, ret);
1111                 goto init_error;
1112         }
1113
1114         /* If the LPI irq is different from the mac irq
1115          * register a dedicated handler
1116          */
1117         if (priv->lpi_irq != dev->irq) {
1118                 ret = devm_request_irq(priv->device, priv->lpi_irq,
1119                                        sxgbe_common_interrupt,
1120                                        IRQF_SHARED, dev->name, dev);
1121                 if (unlikely(ret < 0)) {
1122                         netdev_err(dev, "%s: ERROR: allocating the LPI IRQ %d (%d)\n",
1123                                    __func__, priv->lpi_irq, ret);
1124                         goto init_error;
1125                 }
1126         }
1127
1128         /* Request TX DMA irq lines */
1129         SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
1130                 ret = devm_request_irq(priv->device,
1131                                        (priv->txq[queue_num])->irq_no,
1132                                        sxgbe_tx_interrupt, 0,
1133                                        dev->name, priv->txq[queue_num]);
1134                 if (unlikely(ret < 0)) {
1135                         netdev_err(dev, "%s: ERROR: allocating TX IRQ %d (error: %d)\n",
1136                                    __func__, priv->irq, ret);
1137                         goto init_error;
1138                 }
1139         }
1140
1141         /* Request RX DMA irq lines */
1142         SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
1143                 ret = devm_request_irq(priv->device,
1144                                        (priv->rxq[queue_num])->irq_no,
1145                                        sxgbe_rx_interrupt, 0,
1146                                        dev->name, priv->rxq[queue_num]);
1147                 if (unlikely(ret < 0)) {
1148                         netdev_err(dev, "%s: ERROR: allocating TX IRQ %d (error: %d)\n",
1149                                    __func__, priv->irq, ret);
1150                         goto init_error;
1151                 }
1152         }
1153
1154         /* Enable the MAC Rx/Tx */
1155         priv->hw->mac->enable_tx(priv->ioaddr, true);
1156         priv->hw->mac->enable_rx(priv->ioaddr, true);
1157
1158         /* Set the HW DMA mode and the COE */
1159         sxgbe_mtl_operation_mode(priv);
1160
1161         /* Extra statistics */
1162         memset(&priv->xstats, 0, sizeof(struct sxgbe_extra_stats));
1163
1164         priv->xstats.tx_threshold = priv->tx_tc;
1165         priv->xstats.rx_threshold = priv->rx_tc;
1166
1167         /* Start the ball rolling... */
1168         netdev_dbg(dev, "DMA RX/TX processes started...\n");
1169         priv->hw->dma->start_tx(priv->ioaddr, SXGBE_TX_QUEUES);
1170         priv->hw->dma->start_rx(priv->ioaddr, SXGBE_RX_QUEUES);
1171
1172         if (dev->phydev)
1173                 phy_start(dev->phydev);
1174
1175         /* initialise TX coalesce parameters */
1176         sxgbe_tx_init_coalesce(priv);
1177
1178         if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
1179                 priv->rx_riwt = SXGBE_MAX_DMA_RIWT;
1180                 priv->hw->dma->rx_watchdog(priv->ioaddr, SXGBE_MAX_DMA_RIWT);
1181         }
1182
1183         priv->tx_lpi_timer = SXGBE_DEFAULT_LPI_TIMER;
1184         priv->eee_enabled = sxgbe_eee_init(priv);
1185
1186         napi_enable(&priv->napi);
1187         netif_start_queue(dev);
1188
1189         return 0;
1190
1191 init_error:
1192         free_dma_desc_resources(priv);
1193         if (dev->phydev)
1194                 phy_disconnect(dev->phydev);
1195 phy_error:
1196         clk_disable_unprepare(priv->sxgbe_clk);
1197
1198         return ret;
1199 }
1200
1201 /**
1202  *  sxgbe_release - close entry point of the driver
1203  *  @dev : device pointer.
1204  *  Description:
1205  *  This is the stop entry point of the driver.
1206  */
1207 static int sxgbe_release(struct net_device *dev)
1208 {
1209         struct sxgbe_priv_data *priv = netdev_priv(dev);
1210
1211         if (priv->eee_enabled)
1212                 del_timer_sync(&priv->eee_ctrl_timer);
1213
1214         /* Stop and disconnect the PHY */
1215         if (dev->phydev) {
1216                 phy_stop(dev->phydev);
1217                 phy_disconnect(dev->phydev);
1218         }
1219
1220         netif_tx_stop_all_queues(dev);
1221
1222         napi_disable(&priv->napi);
1223
1224         /* delete TX timers */
1225         sxgbe_tx_del_timer(priv);
1226
1227         /* Stop TX/RX DMA and clear the descriptors */
1228         priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES);
1229         priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES);
1230
1231         /* disable MTL queue */
1232         sxgbe_disable_mtl_engine(priv);
1233
1234         /* Release and free the Rx/Tx resources */
1235         free_dma_desc_resources(priv);
1236
1237         /* Disable the MAC Rx/Tx */
1238         priv->hw->mac->enable_tx(priv->ioaddr, false);
1239         priv->hw->mac->enable_rx(priv->ioaddr, false);
1240
1241         clk_disable_unprepare(priv->sxgbe_clk);
1242
1243         return 0;
1244 }
1245 /* Prepare first Tx descriptor for doing TSO operation */
1246 static void sxgbe_tso_prepare(struct sxgbe_priv_data *priv,
1247                               struct sxgbe_tx_norm_desc *first_desc,
1248                               struct sk_buff *skb)
1249 {
1250         unsigned int total_hdr_len, tcp_hdr_len;
1251
1252         /* Write first Tx descriptor with appropriate value */
1253         tcp_hdr_len = tcp_hdrlen(skb);
1254         total_hdr_len = skb_transport_offset(skb) + tcp_hdr_len;
1255
1256         first_desc->tdes01 = dma_map_single(priv->device, skb->data,
1257                                             total_hdr_len, DMA_TO_DEVICE);
1258         if (dma_mapping_error(priv->device, first_desc->tdes01))
1259                 pr_err("%s: TX dma mapping failed!!\n", __func__);
1260
1261         first_desc->tdes23.tx_rd_des23.first_desc = 1;
1262         priv->hw->desc->tx_desc_enable_tse(first_desc, 1, total_hdr_len,
1263                                            tcp_hdr_len,
1264                                            skb->len - total_hdr_len);
1265 }
1266
1267 /**
1268  *  sxgbe_xmit: Tx entry point of the driver
1269  *  @skb : the socket buffer
1270  *  @dev : device pointer
1271  *  Description : this is the tx entry point of the driver.
1272  *  It programs the chain or the ring and supports oversized frames
1273  *  and SG feature.
1274  */
1275 static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev)
1276 {
1277         unsigned int entry, frag_num;
1278         int cksum_flag = 0;
1279         struct netdev_queue *dev_txq;
1280         unsigned txq_index = skb_get_queue_mapping(skb);
1281         struct sxgbe_priv_data *priv = netdev_priv(dev);
1282         unsigned int tx_rsize = priv->dma_tx_size;
1283         struct sxgbe_tx_queue *tqueue = priv->txq[txq_index];
1284         struct sxgbe_tx_norm_desc *tx_desc, *first_desc;
1285         struct sxgbe_tx_ctxt_desc *ctxt_desc = NULL;
1286         int nr_frags = skb_shinfo(skb)->nr_frags;
1287         int no_pagedlen = skb_headlen(skb);
1288         int is_jumbo = 0;
1289         u16 cur_mss = skb_shinfo(skb)->gso_size;
1290         u32 ctxt_desc_req = 0;
1291
1292         /* get the TX queue handle */
1293         dev_txq = netdev_get_tx_queue(dev, txq_index);
1294
1295         if (unlikely(skb_is_gso(skb) && tqueue->prev_mss != cur_mss))
1296                 ctxt_desc_req = 1;
1297
1298         if (unlikely(skb_vlan_tag_present(skb) ||
1299                      ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
1300                       tqueue->hwts_tx_en)))
1301                 ctxt_desc_req = 1;
1302
1303         if (priv->tx_path_in_lpi_mode)
1304                 sxgbe_disable_eee_mode(priv);
1305
1306         if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) < nr_frags + 1)) {
1307                 if (!netif_tx_queue_stopped(dev_txq)) {
1308                         netif_tx_stop_queue(dev_txq);
1309                         netdev_err(dev, "%s: Tx Ring is full when %d queue is awake\n",
1310                                    __func__, txq_index);
1311                 }
1312                 return NETDEV_TX_BUSY;
1313         }
1314
1315         entry = tqueue->cur_tx % tx_rsize;
1316         tx_desc = tqueue->dma_tx + entry;
1317
1318         first_desc = tx_desc;
1319         if (ctxt_desc_req)
1320                 ctxt_desc = (struct sxgbe_tx_ctxt_desc *)first_desc;
1321
1322         /* save the skb address */
1323         tqueue->tx_skbuff[entry] = skb;
1324
1325         if (!is_jumbo) {
1326                 if (likely(skb_is_gso(skb))) {
1327                         /* TSO support */
1328                         if (unlikely(tqueue->prev_mss != cur_mss)) {
1329                                 priv->hw->desc->tx_ctxt_desc_set_mss(
1330                                                 ctxt_desc, cur_mss);
1331                                 priv->hw->desc->tx_ctxt_desc_set_tcmssv(
1332                                                 ctxt_desc);
1333                                 priv->hw->desc->tx_ctxt_desc_reset_ostc(
1334                                                 ctxt_desc);
1335                                 priv->hw->desc->tx_ctxt_desc_set_ctxt(
1336                                                 ctxt_desc);
1337                                 priv->hw->desc->tx_ctxt_desc_set_owner(
1338                                                 ctxt_desc);
1339
1340                                 entry = (++tqueue->cur_tx) % tx_rsize;
1341                                 first_desc = tqueue->dma_tx + entry;
1342
1343                                 tqueue->prev_mss = cur_mss;
1344                         }
1345                         sxgbe_tso_prepare(priv, first_desc, skb);
1346                 } else {
1347                         tx_desc->tdes01 = dma_map_single(priv->device,
1348                                                          skb->data, no_pagedlen, DMA_TO_DEVICE);
1349                         if (dma_mapping_error(priv->device, tx_desc->tdes01))
1350                                 netdev_err(dev, "%s: TX dma mapping failed!!\n",
1351                                            __func__);
1352
1353                         priv->hw->desc->prepare_tx_desc(tx_desc, 1, no_pagedlen,
1354                                                         no_pagedlen, cksum_flag);
1355                 }
1356         }
1357
1358         for (frag_num = 0; frag_num < nr_frags; frag_num++) {
1359                 const skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_num];
1360                 int len = skb_frag_size(frag);
1361
1362                 entry = (++tqueue->cur_tx) % tx_rsize;
1363                 tx_desc = tqueue->dma_tx + entry;
1364                 tx_desc->tdes01 = skb_frag_dma_map(priv->device, frag, 0, len,
1365                                                    DMA_TO_DEVICE);
1366
1367                 tqueue->tx_skbuff_dma[entry] = tx_desc->tdes01;
1368                 tqueue->tx_skbuff[entry] = NULL;
1369
1370                 /* prepare the descriptor */
1371                 priv->hw->desc->prepare_tx_desc(tx_desc, 0, len,
1372                                                 len, cksum_flag);
1373                 /* memory barrier to flush descriptor */
1374                 wmb();
1375
1376                 /* set the owner */
1377                 priv->hw->desc->set_tx_owner(tx_desc);
1378         }
1379
1380         /* close the descriptors */
1381         priv->hw->desc->close_tx_desc(tx_desc);
1382
1383         /* memory barrier to flush descriptor */
1384         wmb();
1385
1386         tqueue->tx_count_frames += nr_frags + 1;
1387         if (tqueue->tx_count_frames > tqueue->tx_coal_frames) {
1388                 priv->hw->desc->clear_tx_ic(tx_desc);
1389                 priv->xstats.tx_reset_ic_bit++;
1390                 mod_timer(&tqueue->txtimer,
1391                           SXGBE_COAL_TIMER(tqueue->tx_coal_timer));
1392         } else {
1393                 tqueue->tx_count_frames = 0;
1394         }
1395
1396         /* set owner for first desc */
1397         priv->hw->desc->set_tx_owner(first_desc);
1398
1399         /* memory barrier to flush descriptor */
1400         wmb();
1401
1402         tqueue->cur_tx++;
1403
1404         /* display current ring */
1405         netif_dbg(priv, pktdata, dev, "%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d\n",
1406                   __func__, tqueue->cur_tx % tx_rsize,
1407                   tqueue->dirty_tx % tx_rsize, entry,
1408                   first_desc, nr_frags);
1409
1410         if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) <= (MAX_SKB_FRAGS + 1))) {
1411                 netif_dbg(priv, hw, dev, "%s: stop transmitted packets\n",
1412                           __func__);
1413                 netif_tx_stop_queue(dev_txq);
1414         }
1415
1416         dev->stats.tx_bytes += skb->len;
1417
1418         if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
1419                      tqueue->hwts_tx_en)) {
1420                 /* declare that device is doing timestamping */
1421                 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
1422                 priv->hw->desc->tx_enable_tstamp(first_desc);
1423         }
1424
1425         skb_tx_timestamp(skb);
1426
1427         priv->hw->dma->enable_dma_transmission(priv->ioaddr, txq_index);
1428
1429         return NETDEV_TX_OK;
1430 }
1431
1432 /**
1433  * sxgbe_rx_refill: refill used skb preallocated buffers
1434  * @priv: driver private structure
1435  * Description : this is to reallocate the skb for the reception process
1436  * that is based on zero-copy.
1437  */
1438 static void sxgbe_rx_refill(struct sxgbe_priv_data *priv)
1439 {
1440         unsigned int rxsize = priv->dma_rx_size;
1441         int bfsize = priv->dma_buf_sz;
1442         u8 qnum = priv->cur_rx_qnum;
1443
1444         for (; priv->rxq[qnum]->cur_rx - priv->rxq[qnum]->dirty_rx > 0;
1445              priv->rxq[qnum]->dirty_rx++) {
1446                 unsigned int entry = priv->rxq[qnum]->dirty_rx % rxsize;
1447                 struct sxgbe_rx_norm_desc *p;
1448
1449                 p = priv->rxq[qnum]->dma_rx + entry;
1450
1451                 if (likely(priv->rxq[qnum]->rx_skbuff[entry] == NULL)) {
1452                         struct sk_buff *skb;
1453
1454                         skb = netdev_alloc_skb_ip_align(priv->dev, bfsize);
1455
1456                         if (unlikely(skb == NULL))
1457                                 break;
1458
1459                         priv->rxq[qnum]->rx_skbuff[entry] = skb;
1460                         priv->rxq[qnum]->rx_skbuff_dma[entry] =
1461                                 dma_map_single(priv->device, skb->data, bfsize,
1462                                                DMA_FROM_DEVICE);
1463
1464                         p->rdes23.rx_rd_des23.buf2_addr =
1465                                 priv->rxq[qnum]->rx_skbuff_dma[entry];
1466                 }
1467
1468                 /* Added memory barrier for RX descriptor modification */
1469                 wmb();
1470                 priv->hw->desc->set_rx_owner(p);
1471                 priv->hw->desc->set_rx_int_on_com(p);
1472                 /* Added memory barrier for RX descriptor modification */
1473                 wmb();
1474         }
1475 }
1476
1477 /**
1478  * sxgbe_rx: receive the frames from the remote host
1479  * @priv: driver private structure
1480  * @limit: napi bugget.
1481  * Description :  this the function called by the napi poll method.
1482  * It gets all the frames inside the ring.
1483  */
1484 static int sxgbe_rx(struct sxgbe_priv_data *priv, int limit)
1485 {
1486         u8 qnum = priv->cur_rx_qnum;
1487         unsigned int rxsize = priv->dma_rx_size;
1488         unsigned int entry = priv->rxq[qnum]->cur_rx;
1489         unsigned int next_entry = 0;
1490         unsigned int count = 0;
1491         int checksum;
1492         int status;
1493
1494         while (count < limit) {
1495                 struct sxgbe_rx_norm_desc *p;
1496                 struct sk_buff *skb;
1497                 int frame_len;
1498
1499                 p = priv->rxq[qnum]->dma_rx + entry;
1500
1501                 if (priv->hw->desc->get_rx_owner(p))
1502                         break;
1503
1504                 count++;
1505
1506                 next_entry = (++priv->rxq[qnum]->cur_rx) % rxsize;
1507                 prefetch(priv->rxq[qnum]->dma_rx + next_entry);
1508
1509                 /* Read the status of the incoming frame and also get checksum
1510                  * value based on whether it is enabled in SXGBE hardware or
1511                  * not.
1512                  */
1513                 status = priv->hw->desc->rx_wbstatus(p, &priv->xstats,
1514                                                      &checksum);
1515                 if (unlikely(status < 0)) {
1516                         entry = next_entry;
1517                         continue;
1518                 }
1519                 if (unlikely(!priv->rxcsum_insertion))
1520                         checksum = CHECKSUM_NONE;
1521
1522                 skb = priv->rxq[qnum]->rx_skbuff[entry];
1523
1524                 if (unlikely(!skb))
1525                         netdev_err(priv->dev, "rx descriptor is not consistent\n");
1526
1527                 prefetch(skb->data - NET_IP_ALIGN);
1528                 priv->rxq[qnum]->rx_skbuff[entry] = NULL;
1529
1530                 frame_len = priv->hw->desc->get_rx_frame_len(p);
1531
1532                 skb_put(skb, frame_len);
1533
1534                 skb->ip_summed = checksum;
1535                 if (checksum == CHECKSUM_NONE)
1536                         netif_receive_skb(skb);
1537                 else
1538                         napi_gro_receive(&priv->napi, skb);
1539
1540                 entry = next_entry;
1541         }
1542
1543         sxgbe_rx_refill(priv);
1544
1545         return count;
1546 }
1547
1548 /**
1549  *  sxgbe_poll - sxgbe poll method (NAPI)
1550  *  @napi : pointer to the napi structure.
1551  *  @budget : maximum number of packets that the current CPU can receive from
1552  *            all interfaces.
1553  *  Description :
1554  *  To look at the incoming frames and clear the tx resources.
1555  */
1556 static int sxgbe_poll(struct napi_struct *napi, int budget)
1557 {
1558         struct sxgbe_priv_data *priv = container_of(napi,
1559                                                     struct sxgbe_priv_data, napi);
1560         int work_done = 0;
1561         u8 qnum = priv->cur_rx_qnum;
1562
1563         priv->xstats.napi_poll++;
1564         /* first, clean the tx queues */
1565         sxgbe_tx_all_clean(priv);
1566
1567         work_done = sxgbe_rx(priv, budget);
1568         if (work_done < budget) {
1569                 napi_complete_done(napi, work_done);
1570                 priv->hw->dma->enable_dma_irq(priv->ioaddr, qnum);
1571         }
1572
1573         return work_done;
1574 }
1575
1576 /**
1577  *  sxgbe_tx_timeout
1578  *  @dev : Pointer to net device structure
1579  *  @txqueue: index of the hanging queue
1580  *  Description: this function is called when a packet transmission fails to
1581  *   complete within a reasonable time. The driver will mark the error in the
1582  *   netdev structure and arrange for the device to be reset to a sane state
1583  *   in order to transmit a new packet.
1584  */
1585 static void sxgbe_tx_timeout(struct net_device *dev, unsigned int txqueue)
1586 {
1587         struct sxgbe_priv_data *priv = netdev_priv(dev);
1588
1589         sxgbe_reset_all_tx_queues(priv);
1590 }
1591
1592 /**
1593  *  sxgbe_common_interrupt - main ISR
1594  *  @irq: interrupt number.
1595  *  @dev_id: to pass the net device pointer.
1596  *  Description: this is the main driver interrupt service routine.
1597  *  It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI
1598  *  interrupts.
1599  */
1600 static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id)
1601 {
1602         struct net_device *netdev = (struct net_device *)dev_id;
1603         struct sxgbe_priv_data *priv = netdev_priv(netdev);
1604         int status;
1605
1606         status = priv->hw->mac->host_irq_status(priv->ioaddr, &priv->xstats);
1607         /* For LPI we need to save the tx status */
1608         if (status & TX_ENTRY_LPI_MODE) {
1609                 priv->xstats.tx_lpi_entry_n++;
1610                 priv->tx_path_in_lpi_mode = true;
1611         }
1612         if (status & TX_EXIT_LPI_MODE) {
1613                 priv->xstats.tx_lpi_exit_n++;
1614                 priv->tx_path_in_lpi_mode = false;
1615         }
1616         if (status & RX_ENTRY_LPI_MODE)
1617                 priv->xstats.rx_lpi_entry_n++;
1618         if (status & RX_EXIT_LPI_MODE)
1619                 priv->xstats.rx_lpi_exit_n++;
1620
1621         return IRQ_HANDLED;
1622 }
1623
1624 /**
1625  *  sxgbe_tx_interrupt - TX DMA ISR
1626  *  @irq: interrupt number.
1627  *  @dev_id: to pass the net device pointer.
1628  *  Description: this is the tx dma interrupt service routine.
1629  */
1630 static irqreturn_t sxgbe_tx_interrupt(int irq, void *dev_id)
1631 {
1632         int status;
1633         struct sxgbe_tx_queue *txq = (struct sxgbe_tx_queue *)dev_id;
1634         struct sxgbe_priv_data *priv = txq->priv_ptr;
1635
1636         /* get the channel status */
1637         status = priv->hw->dma->tx_dma_int_status(priv->ioaddr, txq->queue_no,
1638                                                   &priv->xstats);
1639         /* check for normal path */
1640         if (likely((status & handle_tx)))
1641                 napi_schedule(&priv->napi);
1642
1643         /* check for unrecoverable error */
1644         if (unlikely((status & tx_hard_error)))
1645                 sxgbe_restart_tx_queue(priv, txq->queue_no);
1646
1647         /* check for TC configuration change */
1648         if (unlikely((status & tx_bump_tc) &&
1649                      (priv->tx_tc != SXGBE_MTL_SFMODE) &&
1650                      (priv->tx_tc < 512))) {
1651                 /* step of TX TC is 32 till 128, otherwise 64 */
1652                 priv->tx_tc += (priv->tx_tc < 128) ? 32 : 64;
1653                 priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr,
1654                                                txq->queue_no, priv->tx_tc);
1655                 priv->xstats.tx_threshold = priv->tx_tc;
1656         }
1657
1658         return IRQ_HANDLED;
1659 }
1660
1661 /**
1662  *  sxgbe_rx_interrupt - RX DMA ISR
1663  *  @irq: interrupt number.
1664  *  @dev_id: to pass the net device pointer.
1665  *  Description: this is the rx dma interrupt service routine.
1666  */
1667 static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id)
1668 {
1669         int status;
1670         struct sxgbe_rx_queue *rxq = (struct sxgbe_rx_queue *)dev_id;
1671         struct sxgbe_priv_data *priv = rxq->priv_ptr;
1672
1673         /* get the channel status */
1674         status = priv->hw->dma->rx_dma_int_status(priv->ioaddr, rxq->queue_no,
1675                                                   &priv->xstats);
1676
1677         if (likely((status & handle_rx) && (napi_schedule_prep(&priv->napi)))) {
1678                 priv->hw->dma->disable_dma_irq(priv->ioaddr, rxq->queue_no);
1679                 __napi_schedule(&priv->napi);
1680         }
1681
1682         /* check for TC configuration change */
1683         if (unlikely((status & rx_bump_tc) &&
1684                      (priv->rx_tc != SXGBE_MTL_SFMODE) &&
1685                      (priv->rx_tc < 128))) {
1686                 /* step of TC is 32 */
1687                 priv->rx_tc += 32;
1688                 priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr,
1689                                                rxq->queue_no, priv->rx_tc);
1690                 priv->xstats.rx_threshold = priv->rx_tc;
1691         }
1692
1693         return IRQ_HANDLED;
1694 }
1695
1696 static inline u64 sxgbe_get_stat64(void __iomem *ioaddr, int reg_lo, int reg_hi)
1697 {
1698         u64 val = readl(ioaddr + reg_lo);
1699
1700         val |= ((u64)readl(ioaddr + reg_hi)) << 32;
1701
1702         return val;
1703 }
1704
1705
1706 /*  sxgbe_get_stats64 - entry point to see statistical information of device
1707  *  @dev : device pointer.
1708  *  @stats : pointer to hold all the statistical information of device.
1709  *  Description:
1710  *  This function is a driver entry point whenever ifconfig command gets
1711  *  executed to see device statistics. Statistics are number of
1712  *  bytes sent or received, errors occurred etc.
1713  */
1714 static void sxgbe_get_stats64(struct net_device *dev,
1715                               struct rtnl_link_stats64 *stats)
1716 {
1717         struct sxgbe_priv_data *priv = netdev_priv(dev);
1718         void __iomem *ioaddr = priv->ioaddr;
1719         u64 count;
1720
1721         spin_lock(&priv->stats_lock);
1722         /* Freeze the counter registers before reading value otherwise it may
1723          * get updated by hardware while we are reading them
1724          */
1725         writel(SXGBE_MMC_CTRL_CNT_FRZ, ioaddr + SXGBE_MMC_CTL_REG);
1726
1727         stats->rx_bytes = sxgbe_get_stat64(ioaddr,
1728                                            SXGBE_MMC_RXOCTETLO_GCNT_REG,
1729                                            SXGBE_MMC_RXOCTETHI_GCNT_REG);
1730
1731         stats->rx_packets = sxgbe_get_stat64(ioaddr,
1732                                              SXGBE_MMC_RXFRAMELO_GBCNT_REG,
1733                                              SXGBE_MMC_RXFRAMEHI_GBCNT_REG);
1734
1735         stats->multicast = sxgbe_get_stat64(ioaddr,
1736                                             SXGBE_MMC_RXMULTILO_GCNT_REG,
1737                                             SXGBE_MMC_RXMULTIHI_GCNT_REG);
1738
1739         stats->rx_crc_errors = sxgbe_get_stat64(ioaddr,
1740                                                 SXGBE_MMC_RXCRCERRLO_REG,
1741                                                 SXGBE_MMC_RXCRCERRHI_REG);
1742
1743         stats->rx_length_errors = sxgbe_get_stat64(ioaddr,
1744                                                   SXGBE_MMC_RXLENERRLO_REG,
1745                                                   SXGBE_MMC_RXLENERRHI_REG);
1746
1747         stats->rx_missed_errors = sxgbe_get_stat64(ioaddr,
1748                                                    SXGBE_MMC_RXFIFOOVERFLOWLO_GBCNT_REG,
1749                                                    SXGBE_MMC_RXFIFOOVERFLOWHI_GBCNT_REG);
1750
1751         stats->tx_bytes = sxgbe_get_stat64(ioaddr,
1752                                            SXGBE_MMC_TXOCTETLO_GCNT_REG,
1753                                            SXGBE_MMC_TXOCTETHI_GCNT_REG);
1754
1755         count = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXFRAMELO_GBCNT_REG,
1756                                  SXGBE_MMC_TXFRAMEHI_GBCNT_REG);
1757
1758         stats->tx_errors = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXFRAMELO_GCNT_REG,
1759                                             SXGBE_MMC_TXFRAMEHI_GCNT_REG);
1760         stats->tx_errors = count - stats->tx_errors;
1761         stats->tx_packets = count;
1762         stats->tx_fifo_errors = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXUFLWLO_GBCNT_REG,
1763                                                  SXGBE_MMC_TXUFLWHI_GBCNT_REG);
1764         writel(0, ioaddr + SXGBE_MMC_CTL_REG);
1765         spin_unlock(&priv->stats_lock);
1766 }
1767
1768 /*  sxgbe_set_features - entry point to set offload features of the device.
1769  *  @dev : device pointer.
1770  *  @features : features which are required to be set.
1771  *  Description:
1772  *  This function is a driver entry point and called by Linux kernel whenever
1773  *  any device features are set or reset by user.
1774  *  Return value:
1775  *  This function returns 0 after setting or resetting device features.
1776  */
1777 static int sxgbe_set_features(struct net_device *dev,
1778                               netdev_features_t features)
1779 {
1780         struct sxgbe_priv_data *priv = netdev_priv(dev);
1781         netdev_features_t changed = dev->features ^ features;
1782
1783         if (changed & NETIF_F_RXCSUM) {
1784                 if (features & NETIF_F_RXCSUM) {
1785                         priv->hw->mac->enable_rx_csum(priv->ioaddr);
1786                         priv->rxcsum_insertion = true;
1787                 } else {
1788                         priv->hw->mac->disable_rx_csum(priv->ioaddr);
1789                         priv->rxcsum_insertion = false;
1790                 }
1791         }
1792
1793         return 0;
1794 }
1795
1796 /*  sxgbe_change_mtu - entry point to change MTU size for the device.
1797  *  @dev : device pointer.
1798  *  @new_mtu : the new MTU size for the device.
1799  *  Description: the Maximum Transfer Unit (MTU) is used by the network layer
1800  *  to drive packet transmission. Ethernet has an MTU of 1500 octets
1801  *  (ETH_DATA_LEN). This value can be changed with ifconfig.
1802  *  Return value:
1803  *  0 on success and an appropriate (-)ve integer as defined in errno.h
1804  *  file on failure.
1805  */
1806 static int sxgbe_change_mtu(struct net_device *dev, int new_mtu)
1807 {
1808         dev->mtu = new_mtu;
1809
1810         if (!netif_running(dev))
1811                 return 0;
1812
1813         /* Recevice ring buffer size is needed to be set based on MTU. If MTU is
1814          * changed then reinitilisation of the receive ring buffers need to be
1815          * done. Hence bring interface down and bring interface back up
1816          */
1817         sxgbe_release(dev);
1818         return sxgbe_open(dev);
1819 }
1820
1821 static void sxgbe_set_umac_addr(void __iomem *ioaddr, unsigned char *addr,
1822                                 unsigned int reg_n)
1823 {
1824         unsigned long data;
1825
1826         data = (addr[5] << 8) | addr[4];
1827         /* For MAC Addr registers se have to set the Address Enable (AE)
1828          * bit that has no effect on the High Reg 0 where the bit 31 (MO)
1829          * is RO.
1830          */
1831         writel(data | SXGBE_HI_REG_AE, ioaddr + SXGBE_ADDR_HIGH(reg_n));
1832         data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
1833         writel(data, ioaddr + SXGBE_ADDR_LOW(reg_n));
1834 }
1835
1836 /**
1837  * sxgbe_set_rx_mode - entry point for setting different receive mode of
1838  * a device. unicast, multicast addressing
1839  * @dev : pointer to the device structure
1840  * Description:
1841  * This function is a driver entry point which gets called by the kernel
1842  * whenever different receive mode like unicast, multicast and promiscuous
1843  * must be enabled/disabled.
1844  * Return value:
1845  * void.
1846  */
1847 static void sxgbe_set_rx_mode(struct net_device *dev)
1848 {
1849         struct sxgbe_priv_data *priv = netdev_priv(dev);
1850         void __iomem *ioaddr = (void __iomem *)priv->ioaddr;
1851         unsigned int value = 0;
1852         u32 mc_filter[2];
1853         struct netdev_hw_addr *ha;
1854         int reg = 1;
1855
1856         netdev_dbg(dev, "%s: # mcasts %d, # unicast %d\n",
1857                    __func__, netdev_mc_count(dev), netdev_uc_count(dev));
1858
1859         if (dev->flags & IFF_PROMISC) {
1860                 value = SXGBE_FRAME_FILTER_PR;
1861
1862         } else if ((netdev_mc_count(dev) > SXGBE_HASH_TABLE_SIZE) ||
1863                    (dev->flags & IFF_ALLMULTI)) {
1864                 value = SXGBE_FRAME_FILTER_PM;  /* pass all multi */
1865                 writel(0xffffffff, ioaddr + SXGBE_HASH_HIGH);
1866                 writel(0xffffffff, ioaddr + SXGBE_HASH_LOW);
1867
1868         } else if (!netdev_mc_empty(dev)) {
1869                 /* Hash filter for multicast */
1870                 value = SXGBE_FRAME_FILTER_HMC;
1871
1872                 memset(mc_filter, 0, sizeof(mc_filter));
1873                 netdev_for_each_mc_addr(ha, dev) {
1874                         /* The upper 6 bits of the calculated CRC are used to
1875                          * index the contens of the hash table
1876                          */
1877                         int bit_nr = bitrev32(~crc32_le(~0, ha->addr, 6)) >> 26;
1878
1879                         /* The most significant bit determines the register to
1880                          * use (H/L) while the other 5 bits determine the bit
1881                          * within the register.
1882                          */
1883                         mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
1884                 }
1885                 writel(mc_filter[0], ioaddr + SXGBE_HASH_LOW);
1886                 writel(mc_filter[1], ioaddr + SXGBE_HASH_HIGH);
1887         }
1888
1889         /* Handle multiple unicast addresses (perfect filtering) */
1890         if (netdev_uc_count(dev) > SXGBE_MAX_PERFECT_ADDRESSES)
1891                 /* Switch to promiscuous mode if more than 16 addrs
1892                  * are required
1893                  */
1894                 value |= SXGBE_FRAME_FILTER_PR;
1895         else {
1896                 netdev_for_each_uc_addr(ha, dev) {
1897                         sxgbe_set_umac_addr(ioaddr, ha->addr, reg);
1898                         reg++;
1899                 }
1900         }
1901 #ifdef FRAME_FILTER_DEBUG
1902         /* Enable Receive all mode (to debug filtering_fail errors) */
1903         value |= SXGBE_FRAME_FILTER_RA;
1904 #endif
1905         writel(value, ioaddr + SXGBE_FRAME_FILTER);
1906
1907         netdev_dbg(dev, "Filter: 0x%08x\n\tHash: HI 0x%08x, LO 0x%08x\n",
1908                    readl(ioaddr + SXGBE_FRAME_FILTER),
1909                    readl(ioaddr + SXGBE_HASH_HIGH),
1910                    readl(ioaddr + SXGBE_HASH_LOW));
1911 }
1912
1913 #ifdef CONFIG_NET_POLL_CONTROLLER
1914 /**
1915  * sxgbe_poll_controller - entry point for polling receive by device
1916  * @dev : pointer to the device structure
1917  * Description:
1918  * This function is used by NETCONSOLE and other diagnostic tools
1919  * to allow network I/O with interrupts disabled.
1920  * Return value:
1921  * Void.
1922  */
1923 static void sxgbe_poll_controller(struct net_device *dev)
1924 {
1925         struct sxgbe_priv_data *priv = netdev_priv(dev);
1926
1927         disable_irq(priv->irq);
1928         sxgbe_rx_interrupt(priv->irq, dev);
1929         enable_irq(priv->irq);
1930 }
1931 #endif
1932
1933 /*  sxgbe_ioctl - Entry point for the Ioctl
1934  *  @dev: Device pointer.
1935  *  @rq: An IOCTL specefic structure, that can contain a pointer to
1936  *  a proprietary structure used to pass information to the driver.
1937  *  @cmd: IOCTL command
1938  *  Description:
1939  *  Currently it supports the phy_mii_ioctl(...) and HW time stamping.
1940  */
1941 static int sxgbe_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1942 {
1943         int ret = -EOPNOTSUPP;
1944
1945         if (!netif_running(dev))
1946                 return -EINVAL;
1947
1948         switch (cmd) {
1949         case SIOCGMIIPHY:
1950         case SIOCGMIIREG:
1951         case SIOCSMIIREG:
1952                 ret = phy_do_ioctl(dev, rq, cmd);
1953                 break;
1954         default:
1955                 break;
1956         }
1957
1958         return ret;
1959 }
1960
1961 static const struct net_device_ops sxgbe_netdev_ops = {
1962         .ndo_open               = sxgbe_open,
1963         .ndo_start_xmit         = sxgbe_xmit,
1964         .ndo_stop               = sxgbe_release,
1965         .ndo_get_stats64        = sxgbe_get_stats64,
1966         .ndo_change_mtu         = sxgbe_change_mtu,
1967         .ndo_set_features       = sxgbe_set_features,
1968         .ndo_set_rx_mode        = sxgbe_set_rx_mode,
1969         .ndo_tx_timeout         = sxgbe_tx_timeout,
1970         .ndo_eth_ioctl          = sxgbe_ioctl,
1971 #ifdef CONFIG_NET_POLL_CONTROLLER
1972         .ndo_poll_controller    = sxgbe_poll_controller,
1973 #endif
1974         .ndo_set_mac_address    = eth_mac_addr,
1975 };
1976
1977 /* Get the hardware ops */
1978 static void sxgbe_get_ops(struct sxgbe_ops * const ops_ptr)
1979 {
1980         ops_ptr->mac            = sxgbe_get_core_ops();
1981         ops_ptr->desc           = sxgbe_get_desc_ops();
1982         ops_ptr->dma            = sxgbe_get_dma_ops();
1983         ops_ptr->mtl            = sxgbe_get_mtl_ops();
1984
1985         /* set the MDIO communication Address/Data regisers */
1986         ops_ptr->mii.addr       = SXGBE_MDIO_SCMD_ADD_REG;
1987         ops_ptr->mii.data       = SXGBE_MDIO_SCMD_DATA_REG;
1988
1989         /* Assigning the default link settings
1990          * no SXGBE defined default values to be set in registers,
1991          * so assigning as 0 for port and duplex
1992          */
1993         ops_ptr->link.port      = 0;
1994         ops_ptr->link.duplex    = 0;
1995         ops_ptr->link.speed     = SXGBE_SPEED_10G;
1996 }
1997
1998 /**
1999  *  sxgbe_hw_init - Init the GMAC device
2000  *  @priv: driver private structure
2001  *  Description: this function checks the HW capability
2002  *  (if supported) and sets the driver's features.
2003  */
2004 static int sxgbe_hw_init(struct sxgbe_priv_data * const priv)
2005 {
2006         u32 ctrl_ids;
2007
2008         priv->hw = kmalloc(sizeof(*priv->hw), GFP_KERNEL);
2009         if(!priv->hw)
2010                 return -ENOMEM;
2011
2012         /* get the hardware ops */
2013         sxgbe_get_ops(priv->hw);
2014
2015         /* get the controller id */
2016         ctrl_ids = priv->hw->mac->get_controller_version(priv->ioaddr);
2017         priv->hw->ctrl_uid = (ctrl_ids & 0x00ff0000) >> 16;
2018         priv->hw->ctrl_id = (ctrl_ids & 0x000000ff);
2019         pr_info("user ID: 0x%x, Controller ID: 0x%x\n",
2020                 priv->hw->ctrl_uid, priv->hw->ctrl_id);
2021
2022         /* get the H/W features */
2023         if (!sxgbe_get_hw_features(priv))
2024                 pr_info("Hardware features not found\n");
2025
2026         if (priv->hw_cap.tx_csum_offload)
2027                 pr_info("TX Checksum offload supported\n");
2028
2029         if (priv->hw_cap.rx_csum_offload)
2030                 pr_info("RX Checksum offload supported\n");
2031
2032         return 0;
2033 }
2034
2035 static int sxgbe_sw_reset(void __iomem *addr)
2036 {
2037         int retry_count = 10;
2038
2039         writel(SXGBE_DMA_SOFT_RESET, addr + SXGBE_DMA_MODE_REG);
2040         while (retry_count--) {
2041                 if (!(readl(addr + SXGBE_DMA_MODE_REG) &
2042                       SXGBE_DMA_SOFT_RESET))
2043                         break;
2044                 mdelay(10);
2045         }
2046
2047         if (retry_count < 0)
2048                 return -EBUSY;
2049
2050         return 0;
2051 }
2052
2053 /**
2054  * sxgbe_drv_probe
2055  * @device: device pointer
2056  * @plat_dat: platform data pointer
2057  * @addr: iobase memory address
2058  * Description: this is the main probe function used to
2059  * call the alloc_etherdev, allocate the priv structure.
2060  */
2061 struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device,
2062                                         struct sxgbe_plat_data *plat_dat,
2063                                         void __iomem *addr)
2064 {
2065         struct sxgbe_priv_data *priv;
2066         struct net_device *ndev;
2067         int ret;
2068         u8 queue_num;
2069
2070         ndev = alloc_etherdev_mqs(sizeof(struct sxgbe_priv_data),
2071                                   SXGBE_TX_QUEUES, SXGBE_RX_QUEUES);
2072         if (!ndev)
2073                 return NULL;
2074
2075         SET_NETDEV_DEV(ndev, device);
2076
2077         priv = netdev_priv(ndev);
2078         priv->device = device;
2079         priv->dev = ndev;
2080
2081         sxgbe_set_ethtool_ops(ndev);
2082         priv->plat = plat_dat;
2083         priv->ioaddr = addr;
2084
2085         ret = sxgbe_sw_reset(priv->ioaddr);
2086         if (ret)
2087                 goto error_free_netdev;
2088
2089         /* Verify driver arguments */
2090         sxgbe_verify_args();
2091
2092         /* Init MAC and get the capabilities */
2093         ret = sxgbe_hw_init(priv);
2094         if (ret)
2095                 goto error_free_netdev;
2096
2097         /* allocate memory resources for Descriptor rings */
2098         ret = txring_mem_alloc(priv);
2099         if (ret)
2100                 goto error_free_hw;
2101
2102         ret = rxring_mem_alloc(priv);
2103         if (ret)
2104                 goto error_free_hw;
2105
2106         ndev->netdev_ops = &sxgbe_netdev_ops;
2107
2108         ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
2109                 NETIF_F_RXCSUM | NETIF_F_TSO | NETIF_F_TSO6 |
2110                 NETIF_F_GRO;
2111         ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
2112         ndev->watchdog_timeo = msecs_to_jiffies(TX_TIMEO);
2113
2114         /* assign filtering support */
2115         ndev->priv_flags |= IFF_UNICAST_FLT;
2116
2117         /* MTU range: 68 - 9000 */
2118         ndev->min_mtu = MIN_MTU;
2119         ndev->max_mtu = MAX_MTU;
2120
2121         priv->msg_enable = netif_msg_init(debug, default_msg_level);
2122
2123         /* Enable TCP segmentation offload for all DMA channels */
2124         if (priv->hw_cap.tcpseg_offload) {
2125                 SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) {
2126                         priv->hw->dma->enable_tso(priv->ioaddr, queue_num);
2127                 }
2128         }
2129
2130         /* Enable Rx checksum offload */
2131         if (priv->hw_cap.rx_csum_offload) {
2132                 priv->hw->mac->enable_rx_csum(priv->ioaddr);
2133                 priv->rxcsum_insertion = true;
2134         }
2135
2136         /* Initialise pause frame settings */
2137         priv->rx_pause = 1;
2138         priv->tx_pause = 1;
2139
2140         /* Rx Watchdog is available, enable depend on platform data */
2141         if (!priv->plat->riwt_off) {
2142                 priv->use_riwt = 1;
2143                 pr_info("Enable RX Mitigation via HW Watchdog Timer\n");
2144         }
2145
2146         netif_napi_add(ndev, &priv->napi, sxgbe_poll);
2147
2148         spin_lock_init(&priv->stats_lock);
2149
2150         priv->sxgbe_clk = clk_get(priv->device, SXGBE_RESOURCE_NAME);
2151         if (IS_ERR(priv->sxgbe_clk)) {
2152                 netdev_warn(ndev, "%s: warning: cannot get CSR clock\n",
2153                             __func__);
2154                 goto error_napi_del;
2155         }
2156
2157         /* If a specific clk_csr value is passed from the platform
2158          * this means that the CSR Clock Range selection cannot be
2159          * changed at run-time and it is fixed. Viceversa the driver'll try to
2160          * set the MDC clock dynamically according to the csr actual
2161          * clock input.
2162          */
2163         if (!priv->plat->clk_csr)
2164                 sxgbe_clk_csr_set(priv);
2165         else
2166                 priv->clk_csr = priv->plat->clk_csr;
2167
2168         /* MDIO bus Registration */
2169         ret = sxgbe_mdio_register(ndev);
2170         if (ret < 0) {
2171                 netdev_dbg(ndev, "%s: MDIO bus (id: %d) registration failed\n",
2172                            __func__, priv->plat->bus_id);
2173                 goto error_clk_put;
2174         }
2175
2176         ret = register_netdev(ndev);
2177         if (ret) {
2178                 pr_err("%s: ERROR %i registering the device\n", __func__, ret);
2179                 goto error_mdio_unregister;
2180         }
2181
2182         sxgbe_check_ether_addr(priv);
2183
2184         return priv;
2185
2186 error_mdio_unregister:
2187         sxgbe_mdio_unregister(ndev);
2188 error_clk_put:
2189         clk_put(priv->sxgbe_clk);
2190 error_napi_del:
2191         netif_napi_del(&priv->napi);
2192 error_free_hw:
2193         kfree(priv->hw);
2194 error_free_netdev:
2195         free_netdev(ndev);
2196
2197         return NULL;
2198 }
2199
2200 /**
2201  * sxgbe_drv_remove
2202  * @ndev: net device pointer
2203  * Description: this function resets the TX/RX processes, disables the MAC RX/TX
2204  * changes the link status, releases the DMA descriptor rings.
2205  */
2206 void sxgbe_drv_remove(struct net_device *ndev)
2207 {
2208         struct sxgbe_priv_data *priv = netdev_priv(ndev);
2209         u8 queue_num;
2210
2211         netdev_info(ndev, "%s: removing driver\n", __func__);
2212
2213         SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) {
2214                 priv->hw->mac->disable_rxqueue(priv->ioaddr, queue_num);
2215         }
2216
2217         priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES);
2218         priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES);
2219
2220         priv->hw->mac->enable_tx(priv->ioaddr, false);
2221         priv->hw->mac->enable_rx(priv->ioaddr, false);
2222
2223         unregister_netdev(ndev);
2224
2225         sxgbe_mdio_unregister(ndev);
2226
2227         clk_put(priv->sxgbe_clk);
2228
2229         netif_napi_del(&priv->napi);
2230
2231         kfree(priv->hw);
2232
2233         free_netdev(ndev);
2234 }
2235
2236 #ifdef CONFIG_PM
2237 int sxgbe_suspend(struct net_device *ndev)
2238 {
2239         return 0;
2240 }
2241
2242 int sxgbe_resume(struct net_device *ndev)
2243 {
2244         return 0;
2245 }
2246
2247 int sxgbe_freeze(struct net_device *ndev)
2248 {
2249         return -ENOSYS;
2250 }
2251
2252 int sxgbe_restore(struct net_device *ndev)
2253 {
2254         return -ENOSYS;
2255 }
2256 #endif /* CONFIG_PM */
2257
2258 /* Driver is configured as Platform driver */
2259 static int __init sxgbe_init(void)
2260 {
2261         int ret;
2262
2263         ret = sxgbe_register_platform();
2264         if (ret)
2265                 goto err;
2266         return 0;
2267 err:
2268         pr_err("driver registration failed\n");
2269         return ret;
2270 }
2271
2272 static void __exit sxgbe_exit(void)
2273 {
2274         sxgbe_unregister_platform();
2275 }
2276
2277 module_init(sxgbe_init);
2278 module_exit(sxgbe_exit);
2279
2280 #ifndef MODULE
2281 static int __init sxgbe_cmdline_opt(char *str)
2282 {
2283         char *opt;
2284
2285         if (!str || !*str)
2286                 return 1;
2287         while ((opt = strsep(&str, ",")) != NULL) {
2288                 if (!strncmp(opt, "eee_timer:", 10)) {
2289                         if (kstrtoint(opt + 10, 0, &eee_timer))
2290                                 goto err;
2291                 }
2292         }
2293         return 1;
2294
2295 err:
2296         pr_err("%s: ERROR broken module parameter conversion\n", __func__);
2297         return 1;
2298 }
2299
2300 __setup("sxgbeeth=", sxgbe_cmdline_opt);
2301 #endif /* MODULE */
2302
2303
2304
2305 MODULE_DESCRIPTION("Samsung 10G/2.5G/1G Ethernet PLATFORM driver");
2306
2307 MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)");
2308 MODULE_PARM_DESC(eee_timer, "EEE-LPI Default LS timer value");
2309
2310 MODULE_AUTHOR("Siva Reddy Kallam <siva.kallam@samsung.com>");
2311 MODULE_AUTHOR("ByungHo An <bh74.an@samsung.com>");
2312 MODULE_AUTHOR("Girish K S <ks.giri@samsung.com>");
2313 MODULE_AUTHOR("Vipul Pandya <vipul.pandya@samsung.com>");
2314
2315 MODULE_LICENSE("GPL");