2 * Copyright (c) 2012 Mellanox Technologies. All rights reserved.
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
34 #include <linux/mlx4/device.h>
35 #include <linux/clocksource.h>
39 /* mlx4_en_read_clock - read raw cycle counter (to be used by time counter)
41 static u64 mlx4_en_read_clock(const struct cyclecounter *tc)
43 struct mlx4_en_dev *mdev =
44 container_of(tc, struct mlx4_en_dev, cycles);
45 struct mlx4_dev *dev = mdev->dev;
47 return mlx4_read_clock(dev) & tc->mask;
50 u64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe)
53 struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe;
55 lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo);
56 hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16;
61 u64 mlx4_en_get_hwtstamp(struct mlx4_en_dev *mdev, u64 timestamp)
67 seq = read_seqbegin(&mdev->clock_lock);
68 nsec = timecounter_cyc2time(&mdev->clock, timestamp);
69 } while (read_seqretry(&mdev->clock_lock, seq));
71 return ns_to_ktime(nsec);
74 void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev,
75 struct skb_shared_hwtstamps *hwts,
78 memset(hwts, 0, sizeof(struct skb_shared_hwtstamps));
79 hwts->hwtstamp = mlx4_en_get_hwtstamp(mdev, timestamp);
83 * mlx4_en_remove_timestamp - disable PTP device
84 * @mdev: board private structure
86 * Stop the PTP support.
88 void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev)
90 if (mdev->ptp_clock) {
91 ptp_clock_unregister(mdev->ptp_clock);
92 mdev->ptp_clock = NULL;
93 mlx4_info(mdev, "removed PHC\n");
97 #define MLX4_EN_WRAP_AROUND_SEC 10UL
98 /* By scheduling the overflow check every 5 seconds, we have a reasonably
99 * good chance we wont miss a wrap around.
100 * TOTO: Use a timer instead of a work queue to increase the guarantee.
102 #define MLX4_EN_OVERFLOW_PERIOD (MLX4_EN_WRAP_AROUND_SEC * HZ / 2)
104 void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev)
106 bool timeout = time_is_before_jiffies(mdev->last_overflow_check +
107 MLX4_EN_OVERFLOW_PERIOD);
111 write_seqlock_irqsave(&mdev->clock_lock, flags);
112 timecounter_read(&mdev->clock);
113 write_sequnlock_irqrestore(&mdev->clock_lock, flags);
114 mdev->last_overflow_check = jiffies;
119 * mlx4_en_phc_adjfine - adjust the frequency of the hardware clock
120 * @ptp: ptp clock structure
121 * @scaled_ppm: Desired frequency change in scaled parts per million
123 * Adjust the frequency of the PHC cycle counter by the indicated scaled_ppm
124 * from the base frequency.
126 * Scaled parts per million is ppm with a 16-bit binary fractional field.
128 static int mlx4_en_phc_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
132 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
135 mult = (u32)adjust_by_scaled_ppm(mdev->nominal_c_mult, scaled_ppm);
137 write_seqlock_irqsave(&mdev->clock_lock, flags);
138 timecounter_read(&mdev->clock);
139 mdev->cycles.mult = mult;
140 write_sequnlock_irqrestore(&mdev->clock_lock, flags);
146 * mlx4_en_phc_adjtime - Shift the time of the hardware clock
147 * @ptp: ptp clock structure
148 * @delta: Desired change in nanoseconds
150 * Adjust the timer by resetting the timecounter structure.
152 static int mlx4_en_phc_adjtime(struct ptp_clock_info *ptp, s64 delta)
154 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
158 write_seqlock_irqsave(&mdev->clock_lock, flags);
159 timecounter_adjtime(&mdev->clock, delta);
160 write_sequnlock_irqrestore(&mdev->clock_lock, flags);
166 * mlx4_en_phc_gettime - Reads the current time from the hardware clock
167 * @ptp: ptp clock structure
168 * @ts: timespec structure to hold the current time value
170 * Read the timecounter and return the correct value in ns after converting
171 * it into a struct timespec.
173 static int mlx4_en_phc_gettime(struct ptp_clock_info *ptp,
174 struct timespec64 *ts)
176 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
181 write_seqlock_irqsave(&mdev->clock_lock, flags);
182 ns = timecounter_read(&mdev->clock);
183 write_sequnlock_irqrestore(&mdev->clock_lock, flags);
185 *ts = ns_to_timespec64(ns);
191 * mlx4_en_phc_settime - Set the current time on the hardware clock
192 * @ptp: ptp clock structure
193 * @ts: timespec containing the new time for the cycle counter
195 * Reset the timecounter to use a new base value instead of the kernel
198 static int mlx4_en_phc_settime(struct ptp_clock_info *ptp,
199 const struct timespec64 *ts)
201 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
203 u64 ns = timespec64_to_ns(ts);
206 /* reset the timecounter */
207 write_seqlock_irqsave(&mdev->clock_lock, flags);
208 timecounter_init(&mdev->clock, &mdev->cycles, ns);
209 write_sequnlock_irqrestore(&mdev->clock_lock, flags);
215 * mlx4_en_phc_enable - enable or disable an ancillary feature
216 * @ptp: ptp clock structure
217 * @request: Desired resource to enable or disable
218 * @on: Caller passes one to enable or zero to disable
220 * Enable (or disable) ancillary features of the PHC subsystem.
221 * Currently, no ancillary features are supported.
223 static int mlx4_en_phc_enable(struct ptp_clock_info __always_unused *ptp,
224 struct ptp_clock_request __always_unused *request,
225 int __always_unused on)
230 static const struct ptp_clock_info mlx4_en_ptp_clock_info = {
231 .owner = THIS_MODULE,
232 .max_adj = 100000000,
238 .adjfine = mlx4_en_phc_adjfine,
239 .adjtime = mlx4_en_phc_adjtime,
240 .gettime64 = mlx4_en_phc_gettime,
241 .settime64 = mlx4_en_phc_settime,
242 .enable = mlx4_en_phc_enable,
246 /* This function calculates the max shift that enables the user range
247 * of MLX4_EN_WRAP_AROUND_SEC values in the cycles register.
249 static u32 freq_to_shift(u16 freq)
251 u32 freq_khz = freq * 1000;
252 u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC;
253 u64 max_val_cycles_rounded = 1ULL << fls64(max_val_cycles - 1);
254 /* calculate max possible multiplier in order to fit in 64bit */
255 u64 max_mul = div64_u64(ULLONG_MAX, max_val_cycles_rounded);
257 /* This comes from the reverse of clocksource_khz2mult */
258 return ilog2(div_u64(max_mul * freq_khz, 1000000));
261 void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev)
263 struct mlx4_dev *dev = mdev->dev;
266 /* mlx4_en_init_timestamp is called for each netdev.
267 * mdev->ptp_clock is common for all ports, skip initialization if
268 * was done for other port.
273 seqlock_init(&mdev->clock_lock);
275 memset(&mdev->cycles, 0, sizeof(mdev->cycles));
276 mdev->cycles.read = mlx4_en_read_clock;
277 mdev->cycles.mask = CLOCKSOURCE_MASK(48);
278 mdev->cycles.shift = freq_to_shift(dev->caps.hca_core_clock);
280 clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift);
281 mdev->nominal_c_mult = mdev->cycles.mult;
283 write_seqlock_irqsave(&mdev->clock_lock, flags);
284 timecounter_init(&mdev->clock, &mdev->cycles,
285 ktime_to_ns(ktime_get_real()));
286 write_sequnlock_irqrestore(&mdev->clock_lock, flags);
288 /* Configure the PHC */
289 mdev->ptp_clock_info = mlx4_en_ptp_clock_info;
290 snprintf(mdev->ptp_clock_info.name, 16, "mlx4 ptp");
292 mdev->ptp_clock = ptp_clock_register(&mdev->ptp_clock_info,
294 if (IS_ERR(mdev->ptp_clock)) {
295 mdev->ptp_clock = NULL;
296 mlx4_err(mdev, "ptp_clock_register failed\n");
297 } else if (mdev->ptp_clock) {
298 mlx4_info(mdev, "registered PHC clock\n");