2 * B53 switch driver main logic
4 * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
5 * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
7 * Permission to use, copy, modify, and/or distribute this software for any
8 * purpose with or without fee is hereby granted, provided that the above
9 * copyright notice and this permission notice appear in all copies.
11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
20 #include <linux/delay.h>
21 #include <linux/export.h>
22 #include <linux/gpio.h>
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/platform_data/b53.h>
26 #include <linux/phy.h>
27 #include <linux/phylink.h>
28 #include <linux/etherdevice.h>
29 #include <linux/if_bridge.h>
41 /* BCM5365 MIB counters */
42 static const struct b53_mib_desc b53_mibs_65[] = {
43 { 8, 0x00, "TxOctets" },
44 { 4, 0x08, "TxDropPkts" },
45 { 4, 0x10, "TxBroadcastPkts" },
46 { 4, 0x14, "TxMulticastPkts" },
47 { 4, 0x18, "TxUnicastPkts" },
48 { 4, 0x1c, "TxCollisions" },
49 { 4, 0x20, "TxSingleCollision" },
50 { 4, 0x24, "TxMultipleCollision" },
51 { 4, 0x28, "TxDeferredTransmit" },
52 { 4, 0x2c, "TxLateCollision" },
53 { 4, 0x30, "TxExcessiveCollision" },
54 { 4, 0x38, "TxPausePkts" },
55 { 8, 0x44, "RxOctets" },
56 { 4, 0x4c, "RxUndersizePkts" },
57 { 4, 0x50, "RxPausePkts" },
58 { 4, 0x54, "Pkts64Octets" },
59 { 4, 0x58, "Pkts65to127Octets" },
60 { 4, 0x5c, "Pkts128to255Octets" },
61 { 4, 0x60, "Pkts256to511Octets" },
62 { 4, 0x64, "Pkts512to1023Octets" },
63 { 4, 0x68, "Pkts1024to1522Octets" },
64 { 4, 0x6c, "RxOversizePkts" },
65 { 4, 0x70, "RxJabbers" },
66 { 4, 0x74, "RxAlignmentErrors" },
67 { 4, 0x78, "RxFCSErrors" },
68 { 8, 0x7c, "RxGoodOctets" },
69 { 4, 0x84, "RxDropPkts" },
70 { 4, 0x88, "RxUnicastPkts" },
71 { 4, 0x8c, "RxMulticastPkts" },
72 { 4, 0x90, "RxBroadcastPkts" },
73 { 4, 0x94, "RxSAChanges" },
74 { 4, 0x98, "RxFragments" },
77 #define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65)
79 /* BCM63xx MIB counters */
80 static const struct b53_mib_desc b53_mibs_63xx[] = {
81 { 8, 0x00, "TxOctets" },
82 { 4, 0x08, "TxDropPkts" },
83 { 4, 0x0c, "TxQoSPkts" },
84 { 4, 0x10, "TxBroadcastPkts" },
85 { 4, 0x14, "TxMulticastPkts" },
86 { 4, 0x18, "TxUnicastPkts" },
87 { 4, 0x1c, "TxCollisions" },
88 { 4, 0x20, "TxSingleCollision" },
89 { 4, 0x24, "TxMultipleCollision" },
90 { 4, 0x28, "TxDeferredTransmit" },
91 { 4, 0x2c, "TxLateCollision" },
92 { 4, 0x30, "TxExcessiveCollision" },
93 { 4, 0x38, "TxPausePkts" },
94 { 8, 0x3c, "TxQoSOctets" },
95 { 8, 0x44, "RxOctets" },
96 { 4, 0x4c, "RxUndersizePkts" },
97 { 4, 0x50, "RxPausePkts" },
98 { 4, 0x54, "Pkts64Octets" },
99 { 4, 0x58, "Pkts65to127Octets" },
100 { 4, 0x5c, "Pkts128to255Octets" },
101 { 4, 0x60, "Pkts256to511Octets" },
102 { 4, 0x64, "Pkts512to1023Octets" },
103 { 4, 0x68, "Pkts1024to1522Octets" },
104 { 4, 0x6c, "RxOversizePkts" },
105 { 4, 0x70, "RxJabbers" },
106 { 4, 0x74, "RxAlignmentErrors" },
107 { 4, 0x78, "RxFCSErrors" },
108 { 8, 0x7c, "RxGoodOctets" },
109 { 4, 0x84, "RxDropPkts" },
110 { 4, 0x88, "RxUnicastPkts" },
111 { 4, 0x8c, "RxMulticastPkts" },
112 { 4, 0x90, "RxBroadcastPkts" },
113 { 4, 0x94, "RxSAChanges" },
114 { 4, 0x98, "RxFragments" },
115 { 4, 0xa0, "RxSymbolErrors" },
116 { 4, 0xa4, "RxQoSPkts" },
117 { 8, 0xa8, "RxQoSOctets" },
118 { 4, 0xb0, "Pkts1523to2047Octets" },
119 { 4, 0xb4, "Pkts2048to4095Octets" },
120 { 4, 0xb8, "Pkts4096to8191Octets" },
121 { 4, 0xbc, "Pkts8192to9728Octets" },
122 { 4, 0xc0, "RxDiscarded" },
125 #define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx)
128 static const struct b53_mib_desc b53_mibs[] = {
129 { 8, 0x00, "TxOctets" },
130 { 4, 0x08, "TxDropPkts" },
131 { 4, 0x10, "TxBroadcastPkts" },
132 { 4, 0x14, "TxMulticastPkts" },
133 { 4, 0x18, "TxUnicastPkts" },
134 { 4, 0x1c, "TxCollisions" },
135 { 4, 0x20, "TxSingleCollision" },
136 { 4, 0x24, "TxMultipleCollision" },
137 { 4, 0x28, "TxDeferredTransmit" },
138 { 4, 0x2c, "TxLateCollision" },
139 { 4, 0x30, "TxExcessiveCollision" },
140 { 4, 0x38, "TxPausePkts" },
141 { 8, 0x50, "RxOctets" },
142 { 4, 0x58, "RxUndersizePkts" },
143 { 4, 0x5c, "RxPausePkts" },
144 { 4, 0x60, "Pkts64Octets" },
145 { 4, 0x64, "Pkts65to127Octets" },
146 { 4, 0x68, "Pkts128to255Octets" },
147 { 4, 0x6c, "Pkts256to511Octets" },
148 { 4, 0x70, "Pkts512to1023Octets" },
149 { 4, 0x74, "Pkts1024to1522Octets" },
150 { 4, 0x78, "RxOversizePkts" },
151 { 4, 0x7c, "RxJabbers" },
152 { 4, 0x80, "RxAlignmentErrors" },
153 { 4, 0x84, "RxFCSErrors" },
154 { 8, 0x88, "RxGoodOctets" },
155 { 4, 0x90, "RxDropPkts" },
156 { 4, 0x94, "RxUnicastPkts" },
157 { 4, 0x98, "RxMulticastPkts" },
158 { 4, 0x9c, "RxBroadcastPkts" },
159 { 4, 0xa0, "RxSAChanges" },
160 { 4, 0xa4, "RxFragments" },
161 { 4, 0xa8, "RxJumboPkts" },
162 { 4, 0xac, "RxSymbolErrors" },
163 { 4, 0xc0, "RxDiscarded" },
166 #define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs)
168 static const struct b53_mib_desc b53_mibs_58xx[] = {
169 { 8, 0x00, "TxOctets" },
170 { 4, 0x08, "TxDropPkts" },
171 { 4, 0x0c, "TxQPKTQ0" },
172 { 4, 0x10, "TxBroadcastPkts" },
173 { 4, 0x14, "TxMulticastPkts" },
174 { 4, 0x18, "TxUnicastPKts" },
175 { 4, 0x1c, "TxCollisions" },
176 { 4, 0x20, "TxSingleCollision" },
177 { 4, 0x24, "TxMultipleCollision" },
178 { 4, 0x28, "TxDeferredCollision" },
179 { 4, 0x2c, "TxLateCollision" },
180 { 4, 0x30, "TxExcessiveCollision" },
181 { 4, 0x34, "TxFrameInDisc" },
182 { 4, 0x38, "TxPausePkts" },
183 { 4, 0x3c, "TxQPKTQ1" },
184 { 4, 0x40, "TxQPKTQ2" },
185 { 4, 0x44, "TxQPKTQ3" },
186 { 4, 0x48, "TxQPKTQ4" },
187 { 4, 0x4c, "TxQPKTQ5" },
188 { 8, 0x50, "RxOctets" },
189 { 4, 0x58, "RxUndersizePkts" },
190 { 4, 0x5c, "RxPausePkts" },
191 { 4, 0x60, "RxPkts64Octets" },
192 { 4, 0x64, "RxPkts65to127Octets" },
193 { 4, 0x68, "RxPkts128to255Octets" },
194 { 4, 0x6c, "RxPkts256to511Octets" },
195 { 4, 0x70, "RxPkts512to1023Octets" },
196 { 4, 0x74, "RxPkts1024toMaxPktsOctets" },
197 { 4, 0x78, "RxOversizePkts" },
198 { 4, 0x7c, "RxJabbers" },
199 { 4, 0x80, "RxAlignmentErrors" },
200 { 4, 0x84, "RxFCSErrors" },
201 { 8, 0x88, "RxGoodOctets" },
202 { 4, 0x90, "RxDropPkts" },
203 { 4, 0x94, "RxUnicastPkts" },
204 { 4, 0x98, "RxMulticastPkts" },
205 { 4, 0x9c, "RxBroadcastPkts" },
206 { 4, 0xa0, "RxSAChanges" },
207 { 4, 0xa4, "RxFragments" },
208 { 4, 0xa8, "RxJumboPkt" },
209 { 4, 0xac, "RxSymblErr" },
210 { 4, 0xb0, "InRangeErrCount" },
211 { 4, 0xb4, "OutRangeErrCount" },
212 { 4, 0xb8, "EEELpiEvent" },
213 { 4, 0xbc, "EEELpiDuration" },
214 { 4, 0xc0, "RxDiscard" },
215 { 4, 0xc8, "TxQPKTQ6" },
216 { 4, 0xcc, "TxQPKTQ7" },
217 { 4, 0xd0, "TxPkts64Octets" },
218 { 4, 0xd4, "TxPkts65to127Octets" },
219 { 4, 0xd8, "TxPkts128to255Octets" },
220 { 4, 0xdc, "TxPkts256to511Ocets" },
221 { 4, 0xe0, "TxPkts512to1023Ocets" },
222 { 4, 0xe4, "TxPkts1024toMaxPktOcets" },
225 #define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx)
227 static int b53_do_vlan_op(struct b53_device *dev, u8 op)
231 b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
233 for (i = 0; i < 10; i++) {
236 b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
237 if (!(vta & VTA_START_CMD))
240 usleep_range(100, 200);
246 static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
247 struct b53_vlan *vlan)
253 entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
254 VA_UNTAG_S_25) | vlan->members;
255 if (dev->core_rev >= 3)
256 entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
258 entry |= VA_VALID_25;
261 b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
262 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
263 VTA_RW_STATE_WR | VTA_RW_OP_EN);
264 } else if (is5365(dev)) {
268 entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
269 VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
271 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
272 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
273 VTA_RW_STATE_WR | VTA_RW_OP_EN);
275 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
276 b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
277 (vlan->untag << VTE_UNTAG_S) | vlan->members);
279 b53_do_vlan_op(dev, VTA_CMD_WRITE);
282 dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
283 vid, vlan->members, vlan->untag);
286 static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
287 struct b53_vlan *vlan)
292 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
293 VTA_RW_STATE_RD | VTA_RW_OP_EN);
294 b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
296 if (dev->core_rev >= 3)
297 vlan->valid = !!(entry & VA_VALID_25_R4);
299 vlan->valid = !!(entry & VA_VALID_25);
300 vlan->members = entry & VA_MEMBER_MASK;
301 vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
303 } else if (is5365(dev)) {
306 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
307 VTA_RW_STATE_WR | VTA_RW_OP_EN);
308 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
310 vlan->valid = !!(entry & VA_VALID_65);
311 vlan->members = entry & VA_MEMBER_MASK;
312 vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
316 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
317 b53_do_vlan_op(dev, VTA_CMD_READ);
318 b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
319 vlan->members = entry & VTE_MEMBERS;
320 vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
325 static void b53_set_forwarding(struct b53_device *dev, int enable)
329 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
332 mgmt |= SM_SW_FWD_EN;
334 mgmt &= ~SM_SW_FWD_EN;
336 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
338 /* Include IMP port in dumb forwarding mode
340 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
341 mgmt |= B53_MII_DUMB_FWDG_EN;
342 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
344 /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
345 * frames should be flooded or not.
347 b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
348 mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
349 b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
352 static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
353 bool enable_filtering)
355 u8 mgmt, vc0, vc1, vc4 = 0, vc5;
357 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
358 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
359 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
361 if (is5325(dev) || is5365(dev)) {
362 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
363 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
364 } else if (is63xx(dev)) {
365 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
366 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
368 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
369 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
373 vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
374 vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
375 vc4 &= ~VC4_ING_VID_CHECK_MASK;
376 if (enable_filtering) {
377 vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
378 vc5 |= VC5_DROP_VTABLE_MISS;
380 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
381 vc5 &= ~VC5_DROP_VTABLE_MISS;
385 vc0 &= ~VC0_RESERVED_1;
387 if (is5325(dev) || is5365(dev))
388 vc1 |= VC1_RX_MCST_TAG_EN;
391 vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
392 vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
393 vc4 &= ~VC4_ING_VID_CHECK_MASK;
394 vc5 &= ~VC5_DROP_VTABLE_MISS;
396 if (is5325(dev) || is5365(dev))
397 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
399 vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
401 if (is5325(dev) || is5365(dev))
402 vc1 &= ~VC1_RX_MCST_TAG_EN;
405 if (!is5325(dev) && !is5365(dev))
406 vc5 &= ~VC5_VID_FFF_EN;
408 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
409 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
411 if (is5325(dev) || is5365(dev)) {
412 /* enable the high 8 bit vid check on 5325 */
413 if (is5325(dev) && enable)
414 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
417 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
419 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
420 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
421 } else if (is63xx(dev)) {
422 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
423 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
424 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
426 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
427 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
428 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
431 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
433 dev->vlan_enabled = enable;
435 dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n",
436 port, enable, enable_filtering);
439 static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
442 u16 max_size = JMS_MIN_SIZE;
444 if (is5325(dev) || is5365(dev))
448 port_mask = dev->enabled_ports;
449 max_size = JMS_MAX_SIZE;
451 port_mask |= JPM_10_100_JUMBO_EN;
454 b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
455 return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
458 static int b53_flush_arl(struct b53_device *dev, u8 mask)
462 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
463 FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
465 for (i = 0; i < 10; i++) {
468 b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
471 if (!(fast_age_ctrl & FAST_AGE_DONE))
479 /* Only age dynamic entries (default behavior) */
480 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
484 static int b53_fast_age_port(struct b53_device *dev, int port)
486 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
488 return b53_flush_arl(dev, FAST_AGE_PORT);
491 static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
493 b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
495 return b53_flush_arl(dev, FAST_AGE_VLAN);
498 void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
500 struct b53_device *dev = ds->priv;
504 /* Enable the IMP port to be in the same VLAN as the other ports
505 * on a per-port basis such that we only have Port i and IMP in
508 b53_for_each_port(dev, i) {
509 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
510 pvlan |= BIT(cpu_port);
511 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
514 EXPORT_SYMBOL(b53_imp_vlan_setup);
516 static void b53_port_set_ucast_flood(struct b53_device *dev, int port,
521 b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
526 b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
529 static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
534 b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
539 b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
541 b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
546 b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
549 static void b53_port_set_learning(struct b53_device *dev, int port,
554 b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, ®);
559 b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg);
562 int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
564 struct b53_device *dev = ds->priv;
565 unsigned int cpu_port;
569 if (!dsa_is_user_port(ds, port))
572 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
574 b53_port_set_ucast_flood(dev, port, true);
575 b53_port_set_mcast_flood(dev, port, true);
576 b53_port_set_learning(dev, port, false);
578 if (dev->ops->irq_enable)
579 ret = dev->ops->irq_enable(dev, port);
583 /* Clear the Rx and Tx disable bits and set to no spanning tree */
584 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
586 /* Set this port, and only this one to be in the default VLAN,
587 * if member of a bridge, restore its membership prior to
588 * bringing down this port.
590 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
593 pvlan |= dev->ports[port].vlan_ctl_mask;
594 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
596 b53_imp_vlan_setup(ds, cpu_port);
598 /* If EEE was enabled, restore it */
599 if (dev->ports[port].eee.eee_enabled)
600 b53_eee_enable_set(ds, port, true);
604 EXPORT_SYMBOL(b53_enable_port);
606 void b53_disable_port(struct dsa_switch *ds, int port)
608 struct b53_device *dev = ds->priv;
611 /* Disable Tx/Rx for the port */
612 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®);
613 reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
614 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
616 if (dev->ops->irq_disable)
617 dev->ops->irq_disable(dev, port);
619 EXPORT_SYMBOL(b53_disable_port);
621 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
623 struct b53_device *dev = ds->priv;
624 bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE);
628 /* Resolve which bit controls the Broadcom tag */
631 val = BRCM_HDR_P8_EN;
634 val = BRCM_HDR_P7_EN;
637 val = BRCM_HDR_P5_EN;
644 /* Enable management mode if tagging is requested */
645 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl);
647 hdr_ctl |= SM_SW_FWD_MODE;
649 hdr_ctl &= ~SM_SW_FWD_MODE;
650 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl);
652 /* Configure the appropriate IMP port */
653 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl);
655 hdr_ctl |= GC_FRM_MGMT_PORT_MII;
657 hdr_ctl |= GC_FRM_MGMT_PORT_M;
658 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
660 /* Enable Broadcom tags for IMP port */
661 b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
666 b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
668 /* Registers below are only accessible on newer devices */
672 /* Enable reception Broadcom tag for CPU TX (switch RX) to
673 * allow us to tag outgoing frames
675 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, ®);
680 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
682 /* Enable transmission of Broadcom tags from the switch (CPU RX) to
683 * allow delivering frames to the per-port net_devices
685 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, ®);
690 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
692 EXPORT_SYMBOL(b53_brcm_hdr_setup);
694 static void b53_enable_cpu_port(struct b53_device *dev, int port)
698 /* BCM5325 CPU port is at 8 */
699 if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
702 port_ctrl = PORT_CTRL_RX_BCST_EN |
703 PORT_CTRL_RX_MCST_EN |
704 PORT_CTRL_RX_UCST_EN;
705 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
707 b53_brcm_hdr_setup(dev->ds, port);
709 b53_port_set_ucast_flood(dev, port, true);
710 b53_port_set_mcast_flood(dev, port, true);
711 b53_port_set_learning(dev, port, false);
714 static void b53_enable_mib(struct b53_device *dev)
718 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
719 gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
720 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
723 static u16 b53_default_pvid(struct b53_device *dev)
725 if (is5325(dev) || is5365(dev))
731 static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
733 struct b53_device *dev = ds->priv;
735 return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
738 int b53_configure_vlan(struct dsa_switch *ds)
740 struct b53_device *dev = ds->priv;
741 struct b53_vlan vl = { 0 };
746 def_vid = b53_default_pvid(dev);
748 /* clear all vlan entries */
749 if (is5325(dev) || is5365(dev)) {
750 for (i = def_vid; i < dev->num_vlans; i++)
751 b53_set_vlan_entry(dev, i, &vl);
753 b53_do_vlan_op(dev, VTA_CMD_CLEAR);
756 b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
758 /* Create an untagged VLAN entry for the default PVID in case
759 * CONFIG_VLAN_8021Q is disabled and there are no calls to
760 * dsa_user_vlan_rx_add_vid() to create the default VLAN
761 * entry. Do this only when the tagging protocol is not
764 b53_for_each_port(dev, i) {
765 v = &dev->vlans[def_vid];
766 v->members |= BIT(i);
767 if (!b53_vlan_port_needs_forced_tagged(ds, i))
768 v->untag = v->members;
769 b53_write16(dev, B53_VLAN_PAGE,
770 B53_VLAN_PORT_DEF_TAG(i), def_vid);
773 /* Upon initial call we have not set-up any VLANs, but upon
774 * system resume, we need to restore all VLAN entries.
776 for (vid = def_vid; vid < dev->num_vlans; vid++) {
777 v = &dev->vlans[vid];
782 b53_set_vlan_entry(dev, vid, v);
783 b53_fast_age_vlan(dev, vid);
788 EXPORT_SYMBOL(b53_configure_vlan);
790 static void b53_switch_reset_gpio(struct b53_device *dev)
792 int gpio = dev->reset_gpio;
797 /* Reset sequence: RESET low(50ms)->high(20ms)
799 gpio_set_value(gpio, 0);
802 gpio_set_value(gpio, 1);
805 dev->current_page = 0xff;
808 static int b53_switch_reset(struct b53_device *dev)
810 unsigned int timeout = 1000;
813 b53_switch_reset_gpio(dev);
816 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
817 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
820 /* This is specific to 58xx devices here, do not use is58xx() which
821 * covers the larger Starfigther 2 family, including 7445/7278 which
822 * still use this driver as a library and need to perform the reset
825 if (dev->chip_id == BCM58XX_DEVICE_ID ||
826 dev->chip_id == BCM583XX_DEVICE_ID) {
827 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
828 reg |= SW_RST | EN_SW_RST | EN_CH_RST;
829 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
832 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
836 usleep_range(1000, 2000);
837 } while (timeout-- > 0);
841 "Timeout waiting for SW_RST to clear!\n");
846 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
848 if (!(mgmt & SM_SW_FWD_EN)) {
849 mgmt &= ~SM_SW_FWD_MODE;
850 mgmt |= SM_SW_FWD_EN;
852 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
853 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
855 if (!(mgmt & SM_SW_FWD_EN)) {
856 dev_err(dev->dev, "Failed to enable switch!\n");
863 return b53_flush_arl(dev, FAST_AGE_STATIC);
866 static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
868 struct b53_device *priv = ds->priv;
872 if (priv->ops->phy_read16)
873 ret = priv->ops->phy_read16(priv, addr, reg, &value);
875 ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
878 return ret ? ret : value;
881 static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
883 struct b53_device *priv = ds->priv;
885 if (priv->ops->phy_write16)
886 return priv->ops->phy_write16(priv, addr, reg, val);
888 return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
891 static int b53_reset_switch(struct b53_device *priv)
894 memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
895 memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
897 priv->serdes_lane = B53_INVALID_LANE;
899 return b53_switch_reset(priv);
902 static int b53_apply_config(struct b53_device *priv)
904 /* disable switching */
905 b53_set_forwarding(priv, 0);
907 b53_configure_vlan(priv->ds);
909 /* enable switching */
910 b53_set_forwarding(priv, 1);
915 static void b53_reset_mib(struct b53_device *priv)
919 b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
921 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
923 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
927 static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
931 else if (is63xx(dev))
932 return b53_mibs_63xx;
933 else if (is58xx(dev))
934 return b53_mibs_58xx;
939 static unsigned int b53_get_mib_size(struct b53_device *dev)
942 return B53_MIBS_65_SIZE;
943 else if (is63xx(dev))
944 return B53_MIBS_63XX_SIZE;
945 else if (is58xx(dev))
946 return B53_MIBS_58XX_SIZE;
948 return B53_MIBS_SIZE;
951 static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
953 /* These ports typically do not have built-in PHYs */
955 case B53_CPU_PORT_25:
961 return mdiobus_get_phy(ds->user_mii_bus, port);
964 void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
967 struct b53_device *dev = ds->priv;
968 const struct b53_mib_desc *mibs = b53_get_mib(dev);
969 unsigned int mib_size = b53_get_mib_size(dev);
970 struct phy_device *phydev;
973 if (stringset == ETH_SS_STATS) {
974 for (i = 0; i < mib_size; i++)
975 strscpy(data + i * ETH_GSTRING_LEN,
976 mibs[i].name, ETH_GSTRING_LEN);
977 } else if (stringset == ETH_SS_PHY_STATS) {
978 phydev = b53_get_phy_device(ds, port);
982 phy_ethtool_get_strings(phydev, data);
985 EXPORT_SYMBOL(b53_get_strings);
987 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
989 struct b53_device *dev = ds->priv;
990 const struct b53_mib_desc *mibs = b53_get_mib(dev);
991 unsigned int mib_size = b53_get_mib_size(dev);
992 const struct b53_mib_desc *s;
996 if (is5365(dev) && port == 5)
999 mutex_lock(&dev->stats_mutex);
1001 for (i = 0; i < mib_size; i++) {
1005 b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
1009 b53_read32(dev, B53_MIB_PAGE(port), s->offset,
1016 mutex_unlock(&dev->stats_mutex);
1018 EXPORT_SYMBOL(b53_get_ethtool_stats);
1020 void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data)
1022 struct phy_device *phydev;
1024 phydev = b53_get_phy_device(ds, port);
1028 phy_ethtool_get_stats(phydev, NULL, data);
1030 EXPORT_SYMBOL(b53_get_ethtool_phy_stats);
1032 int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
1034 struct b53_device *dev = ds->priv;
1035 struct phy_device *phydev;
1037 if (sset == ETH_SS_STATS) {
1038 return b53_get_mib_size(dev);
1039 } else if (sset == ETH_SS_PHY_STATS) {
1040 phydev = b53_get_phy_device(ds, port);
1044 return phy_ethtool_get_sset_count(phydev);
1049 EXPORT_SYMBOL(b53_get_sset_count);
1051 enum b53_devlink_resource_id {
1052 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1055 static u64 b53_devlink_vlan_table_get(void *priv)
1057 struct b53_device *dev = priv;
1058 struct b53_vlan *vl;
1062 for (i = 0; i < dev->num_vlans; i++) {
1063 vl = &dev->vlans[i];
1071 int b53_setup_devlink_resources(struct dsa_switch *ds)
1073 struct devlink_resource_size_params size_params;
1074 struct b53_device *dev = ds->priv;
1077 devlink_resource_size_params_init(&size_params, dev->num_vlans,
1079 1, DEVLINK_RESOURCE_UNIT_ENTRY);
1081 err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans,
1082 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1083 DEVLINK_RESOURCE_ID_PARENT_TOP,
1088 dsa_devlink_resource_occ_get_register(ds,
1089 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1090 b53_devlink_vlan_table_get, dev);
1094 dsa_devlink_resources_unregister(ds);
1097 EXPORT_SYMBOL(b53_setup_devlink_resources);
1099 static int b53_setup(struct dsa_switch *ds)
1101 struct b53_device *dev = ds->priv;
1105 /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
1106 * which forces the CPU port to be tagged in all VLANs.
1108 ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE;
1110 ret = b53_reset_switch(dev);
1112 dev_err(ds->dev, "failed to reset switch\n");
1118 ret = b53_apply_config(dev);
1120 dev_err(ds->dev, "failed to apply configuration\n");
1124 /* Configure IMP/CPU port, disable all other ports. Enabled
1125 * ports will be configured with .port_enable
1127 for (port = 0; port < dev->num_ports; port++) {
1128 if (dsa_is_cpu_port(ds, port))
1129 b53_enable_cpu_port(dev, port);
1131 b53_disable_port(ds, port);
1134 return b53_setup_devlink_resources(ds);
1137 static void b53_teardown(struct dsa_switch *ds)
1139 dsa_devlink_resources_unregister(ds);
1142 static void b53_force_link(struct b53_device *dev, int port, int link)
1146 /* Override the port settings */
1147 if (port == dev->imp_port) {
1148 off = B53_PORT_OVERRIDE_CTRL;
1149 val = PORT_OVERRIDE_EN;
1151 off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1155 b53_read8(dev, B53_CTRL_PAGE, off, ®);
1158 reg |= PORT_OVERRIDE_LINK;
1160 reg &= ~PORT_OVERRIDE_LINK;
1161 b53_write8(dev, B53_CTRL_PAGE, off, reg);
1164 static void b53_force_port_config(struct b53_device *dev, int port,
1165 int speed, int duplex,
1166 bool tx_pause, bool rx_pause)
1170 /* Override the port settings */
1171 if (port == dev->imp_port) {
1172 off = B53_PORT_OVERRIDE_CTRL;
1173 val = PORT_OVERRIDE_EN;
1175 off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1179 b53_read8(dev, B53_CTRL_PAGE, off, ®);
1181 if (duplex == DUPLEX_FULL)
1182 reg |= PORT_OVERRIDE_FULL_DUPLEX;
1184 reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
1188 reg |= PORT_OVERRIDE_SPEED_2000M;
1191 reg |= PORT_OVERRIDE_SPEED_1000M;
1194 reg |= PORT_OVERRIDE_SPEED_100M;
1197 reg |= PORT_OVERRIDE_SPEED_10M;
1200 dev_err(dev->dev, "unknown speed: %d\n", speed);
1205 reg |= PORT_OVERRIDE_RX_FLOW;
1207 reg |= PORT_OVERRIDE_TX_FLOW;
1209 b53_write8(dev, B53_CTRL_PAGE, off, reg);
1212 static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
1213 phy_interface_t interface)
1215 struct b53_device *dev = ds->priv;
1216 u8 rgmii_ctrl = 0, off;
1218 if (port == dev->imp_port)
1219 off = B53_RGMII_CTRL_IMP;
1221 off = B53_RGMII_CTRL_P(port);
1223 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
1225 switch (interface) {
1226 case PHY_INTERFACE_MODE_RGMII_ID:
1227 rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
1229 case PHY_INTERFACE_MODE_RGMII_RXID:
1230 rgmii_ctrl &= ~(RGMII_CTRL_DLL_TXC);
1231 rgmii_ctrl |= RGMII_CTRL_DLL_RXC;
1233 case PHY_INTERFACE_MODE_RGMII_TXID:
1234 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC);
1235 rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
1237 case PHY_INTERFACE_MODE_RGMII:
1239 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
1243 if (port != dev->imp_port) {
1245 rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE;
1247 rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII;
1250 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
1252 dev_dbg(ds->dev, "Configured port %d for %s\n", port,
1253 phy_modes(interface));
1256 static void b53_adjust_link(struct dsa_switch *ds, int port,
1257 struct phy_device *phydev)
1259 struct b53_device *dev = ds->priv;
1260 struct ethtool_eee *p = &dev->ports[port].eee;
1261 u8 rgmii_ctrl = 0, reg = 0, off;
1262 bool tx_pause = false;
1263 bool rx_pause = false;
1265 if (!phy_is_pseudo_fixed_link(phydev))
1268 /* Enable flow control on BCM5301x's CPU port */
1269 if (is5301x(dev) && dsa_is_cpu_port(ds, port))
1270 tx_pause = rx_pause = true;
1272 if (phydev->pause) {
1273 if (phydev->asym_pause)
1278 b53_force_port_config(dev, port, phydev->speed, phydev->duplex,
1279 tx_pause, rx_pause);
1280 b53_force_link(dev, port, phydev->link);
1282 if (is63xx(dev) && port >= B53_63XX_RGMII0)
1283 b53_adjust_63xx_rgmii(ds, port, phydev->interface);
1285 if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
1286 if (port == dev->imp_port)
1287 off = B53_RGMII_CTRL_IMP;
1289 off = B53_RGMII_CTRL_P(port);
1291 /* Configure the port RGMII clock delay by DLL disabled and
1292 * tx_clk aligned timing (restoring to reset defaults)
1294 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
1295 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
1296 RGMII_CTRL_TIMING_SEL);
1298 /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
1299 * sure that we enable the port TX clock internal delay to
1300 * account for this internal delay that is inserted, otherwise
1301 * the switch won't be able to receive correctly.
1303 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
1304 * any delay neither on transmission nor reception, so the
1305 * BCM53125 must also be configured accordingly to account for
1306 * the lack of delay and introduce
1308 * The BCM53125 switch has its RX clock and TX clock control
1309 * swapped, hence the reason why we modify the TX clock path in
1312 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
1313 rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
1314 if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
1315 rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
1316 rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
1317 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
1319 dev_info(ds->dev, "Configured port %d for %s\n", port,
1320 phy_modes(phydev->interface));
1323 /* configure MII port if necessary */
1325 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1328 /* reverse mii needs to be enabled */
1329 if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1330 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1331 reg | PORT_OVERRIDE_RV_MII_25);
1332 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1335 if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1337 "Failed to enable reverse MII mode\n");
1343 /* Re-negotiate EEE if it was enabled already */
1344 p->eee_enabled = b53_eee_init(ds, port, phydev);
1347 void b53_port_event(struct dsa_switch *ds, int port)
1349 struct b53_device *dev = ds->priv;
1353 b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
1354 link = !!(sts & BIT(port));
1355 dsa_port_phylink_mac_change(ds, port, link);
1357 EXPORT_SYMBOL(b53_port_event);
1359 static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
1360 struct phylink_config *config)
1362 struct b53_device *dev = ds->priv;
1364 /* Internal ports need GMII for PHYLIB */
1365 __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces);
1367 /* These switches appear to support MII and RevMII too, but beyond
1368 * this, the code gives very few clues. FIXME: We probably need more
1369 * interface modes here.
1371 * According to b53_srab_mux_init(), ports 3..5 can support:
1372 * SGMII, MII, GMII, RGMII or INTERNAL depending on the MUX setting.
1373 * However, the interface mode read from the MUX configuration is
1374 * not passed back to DSA, so phylink uses NA.
1375 * DT can specify RGMII for ports 0, 1.
1376 * For MDIO, port 8 can be RGMII_TXID.
1378 __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
1379 __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces);
1381 config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
1384 /* 5325/5365 are not capable of gigabit speeds, everything else is.
1385 * Note: the original code also exclulded Gigagbit for MII, RevMII
1386 * and 802.3z modes. MII and RevMII are not able to work above 100M,
1387 * so will be excluded by the generic validator implementation.
1388 * However, the exclusion of Gigabit for 802.3z just seems wrong.
1390 if (!(is5325(dev) || is5365(dev)))
1391 config->mac_capabilities |= MAC_1000;
1393 /* Get the implementation specific capabilities */
1394 if (dev->ops->phylink_get_caps)
1395 dev->ops->phylink_get_caps(dev, port, config);
1398 static struct phylink_pcs *b53_phylink_mac_select_pcs(struct dsa_switch *ds,
1400 phy_interface_t interface)
1402 struct b53_device *dev = ds->priv;
1404 if (!dev->ops->phylink_mac_select_pcs)
1407 return dev->ops->phylink_mac_select_pcs(dev, port, interface);
1410 void b53_phylink_mac_config(struct dsa_switch *ds, int port,
1412 const struct phylink_link_state *state)
1415 EXPORT_SYMBOL(b53_phylink_mac_config);
1417 void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
1419 phy_interface_t interface)
1421 struct b53_device *dev = ds->priv;
1423 if (mode == MLO_AN_PHY)
1426 if (mode == MLO_AN_FIXED) {
1427 b53_force_link(dev, port, false);
1431 if (phy_interface_mode_is_8023z(interface) &&
1432 dev->ops->serdes_link_set)
1433 dev->ops->serdes_link_set(dev, port, mode, interface, false);
1435 EXPORT_SYMBOL(b53_phylink_mac_link_down);
1437 void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
1439 phy_interface_t interface,
1440 struct phy_device *phydev,
1441 int speed, int duplex,
1442 bool tx_pause, bool rx_pause)
1444 struct b53_device *dev = ds->priv;
1446 if (is63xx(dev) && port >= B53_63XX_RGMII0)
1447 b53_adjust_63xx_rgmii(ds, port, interface);
1449 if (mode == MLO_AN_PHY)
1452 if (mode == MLO_AN_FIXED) {
1453 b53_force_port_config(dev, port, speed, duplex,
1454 tx_pause, rx_pause);
1455 b53_force_link(dev, port, true);
1459 if (phy_interface_mode_is_8023z(interface) &&
1460 dev->ops->serdes_link_set)
1461 dev->ops->serdes_link_set(dev, port, mode, interface, true);
1463 EXPORT_SYMBOL(b53_phylink_mac_link_up);
1465 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
1466 struct netlink_ext_ack *extack)
1468 struct b53_device *dev = ds->priv;
1470 b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering);
1474 EXPORT_SYMBOL(b53_vlan_filtering);
1476 static int b53_vlan_prepare(struct dsa_switch *ds, int port,
1477 const struct switchdev_obj_port_vlan *vlan)
1479 struct b53_device *dev = ds->priv;
1481 if ((is5325(dev) || is5365(dev)) && vlan->vid == 0)
1484 /* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
1485 * receiving VLAN tagged frames at all, we can still allow the port to
1486 * be configured for egress untagged.
1488 if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
1489 !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
1492 if (vlan->vid >= dev->num_vlans)
1495 b53_enable_vlan(dev, port, true, ds->vlan_filtering);
1500 int b53_vlan_add(struct dsa_switch *ds, int port,
1501 const struct switchdev_obj_port_vlan *vlan,
1502 struct netlink_ext_ack *extack)
1504 struct b53_device *dev = ds->priv;
1505 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1506 bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
1507 struct b53_vlan *vl;
1510 err = b53_vlan_prepare(ds, port, vlan);
1514 vl = &dev->vlans[vlan->vid];
1516 b53_get_vlan_entry(dev, vlan->vid, vl);
1518 if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev))
1521 vl->members |= BIT(port);
1522 if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
1523 vl->untag |= BIT(port);
1525 vl->untag &= ~BIT(port);
1527 b53_set_vlan_entry(dev, vlan->vid, vl);
1528 b53_fast_age_vlan(dev, vlan->vid);
1530 if (pvid && !dsa_is_cpu_port(ds, port)) {
1531 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
1533 b53_fast_age_vlan(dev, vlan->vid);
1538 EXPORT_SYMBOL(b53_vlan_add);
1540 int b53_vlan_del(struct dsa_switch *ds, int port,
1541 const struct switchdev_obj_port_vlan *vlan)
1543 struct b53_device *dev = ds->priv;
1544 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1545 struct b53_vlan *vl;
1548 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
1550 vl = &dev->vlans[vlan->vid];
1552 b53_get_vlan_entry(dev, vlan->vid, vl);
1554 vl->members &= ~BIT(port);
1556 if (pvid == vlan->vid)
1557 pvid = b53_default_pvid(dev);
1559 if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
1560 vl->untag &= ~(BIT(port));
1562 b53_set_vlan_entry(dev, vlan->vid, vl);
1563 b53_fast_age_vlan(dev, vlan->vid);
1565 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
1566 b53_fast_age_vlan(dev, pvid);
1570 EXPORT_SYMBOL(b53_vlan_del);
1572 /* Address Resolution Logic routines. Caller must hold &dev->arl_mutex. */
1573 static int b53_arl_op_wait(struct b53_device *dev)
1575 unsigned int timeout = 10;
1579 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®);
1580 if (!(reg & ARLTBL_START_DONE))
1583 usleep_range(1000, 2000);
1584 } while (timeout--);
1586 dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
1591 static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
1598 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®);
1599 reg |= ARLTBL_START_DONE;
1604 if (dev->vlan_enabled)
1605 reg &= ~ARLTBL_IVL_SVL_SELECT;
1607 reg |= ARLTBL_IVL_SVL_SELECT;
1608 b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
1610 return b53_arl_op_wait(dev);
1613 static int b53_arl_read(struct b53_device *dev, u64 mac,
1614 u16 vid, struct b53_arl_entry *ent, u8 *idx)
1616 DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
1620 ret = b53_arl_op_wait(dev);
1624 bitmap_zero(free_bins, dev->num_arl_bins);
1627 for (i = 0; i < dev->num_arl_bins; i++) {
1631 b53_read64(dev, B53_ARLIO_PAGE,
1632 B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
1633 b53_read32(dev, B53_ARLIO_PAGE,
1634 B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
1635 b53_arl_to_entry(ent, mac_vid, fwd_entry);
1637 if (!(fwd_entry & ARLTBL_VALID)) {
1638 set_bit(i, free_bins);
1641 if ((mac_vid & ARLTBL_MAC_MASK) != mac)
1643 if (dev->vlan_enabled &&
1644 ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
1650 *idx = find_first_bit(free_bins, dev->num_arl_bins);
1651 return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
1654 static int b53_arl_op(struct b53_device *dev, int op, int port,
1655 const unsigned char *addr, u16 vid, bool is_valid)
1657 struct b53_arl_entry ent;
1659 u64 mac, mac_vid = 0;
1663 /* Convert the array into a 64-bit MAC */
1664 mac = ether_addr_to_u64(addr);
1666 /* Perform a read for the given MAC and VID */
1667 b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
1668 b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
1670 /* Issue a read operation for this MAC */
1671 ret = b53_arl_rw_op(dev, 1);
1675 ret = b53_arl_read(dev, mac, vid, &ent, &idx);
1677 /* If this is a read, just finish now */
1685 dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
1687 return is_valid ? ret : 0;
1689 /* We could not find a matching MAC, so reset to a new entry */
1690 dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
1695 dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
1700 /* For multicast address, the port is a bitmask and the validity
1701 * is determined by having at least one port being still active
1703 if (!is_multicast_ether_addr(addr)) {
1705 ent.is_valid = is_valid;
1708 ent.port |= BIT(port);
1710 ent.port &= ~BIT(port);
1712 ent.is_valid = !!(ent.port);
1716 ent.is_static = true;
1718 memcpy(ent.mac, addr, ETH_ALEN);
1719 b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
1721 b53_write64(dev, B53_ARLIO_PAGE,
1722 B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
1723 b53_write32(dev, B53_ARLIO_PAGE,
1724 B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
1726 return b53_arl_rw_op(dev, 0);
1729 int b53_fdb_add(struct dsa_switch *ds, int port,
1730 const unsigned char *addr, u16 vid,
1733 struct b53_device *priv = ds->priv;
1736 /* 5325 and 5365 require some more massaging, but could
1737 * be supported eventually
1739 if (is5325(priv) || is5365(priv))
1742 mutex_lock(&priv->arl_mutex);
1743 ret = b53_arl_op(priv, 0, port, addr, vid, true);
1744 mutex_unlock(&priv->arl_mutex);
1748 EXPORT_SYMBOL(b53_fdb_add);
1750 int b53_fdb_del(struct dsa_switch *ds, int port,
1751 const unsigned char *addr, u16 vid,
1754 struct b53_device *priv = ds->priv;
1757 mutex_lock(&priv->arl_mutex);
1758 ret = b53_arl_op(priv, 0, port, addr, vid, false);
1759 mutex_unlock(&priv->arl_mutex);
1763 EXPORT_SYMBOL(b53_fdb_del);
1765 static int b53_arl_search_wait(struct b53_device *dev)
1767 unsigned int timeout = 1000;
1771 b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®);
1772 if (!(reg & ARL_SRCH_STDN))
1775 if (reg & ARL_SRCH_VLID)
1778 usleep_range(1000, 2000);
1779 } while (timeout--);
1784 static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
1785 struct b53_arl_entry *ent)
1790 b53_read64(dev, B53_ARLIO_PAGE,
1791 B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
1792 b53_read32(dev, B53_ARLIO_PAGE,
1793 B53_ARL_SRCH_RSTL(idx), &fwd_entry);
1794 b53_arl_to_entry(ent, mac_vid, fwd_entry);
1797 static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
1798 dsa_fdb_dump_cb_t *cb, void *data)
1803 if (port != ent->port)
1806 return cb(ent->mac, ent->vid, ent->is_static, data);
1809 int b53_fdb_dump(struct dsa_switch *ds, int port,
1810 dsa_fdb_dump_cb_t *cb, void *data)
1812 struct b53_device *priv = ds->priv;
1813 struct b53_arl_entry results[2];
1814 unsigned int count = 0;
1818 mutex_lock(&priv->arl_mutex);
1820 /* Start search operation */
1821 reg = ARL_SRCH_STDN;
1822 b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
1825 ret = b53_arl_search_wait(priv);
1829 b53_arl_search_rd(priv, 0, &results[0]);
1830 ret = b53_fdb_copy(port, &results[0], cb, data);
1834 if (priv->num_arl_bins > 2) {
1835 b53_arl_search_rd(priv, 1, &results[1]);
1836 ret = b53_fdb_copy(port, &results[1], cb, data);
1840 if (!results[0].is_valid && !results[1].is_valid)
1844 } while (count++ < b53_max_arl_entries(priv) / 2);
1846 mutex_unlock(&priv->arl_mutex);
1850 EXPORT_SYMBOL(b53_fdb_dump);
1852 int b53_mdb_add(struct dsa_switch *ds, int port,
1853 const struct switchdev_obj_port_mdb *mdb,
1856 struct b53_device *priv = ds->priv;
1859 /* 5325 and 5365 require some more massaging, but could
1860 * be supported eventually
1862 if (is5325(priv) || is5365(priv))
1865 mutex_lock(&priv->arl_mutex);
1866 ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true);
1867 mutex_unlock(&priv->arl_mutex);
1871 EXPORT_SYMBOL(b53_mdb_add);
1873 int b53_mdb_del(struct dsa_switch *ds, int port,
1874 const struct switchdev_obj_port_mdb *mdb,
1877 struct b53_device *priv = ds->priv;
1880 mutex_lock(&priv->arl_mutex);
1881 ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false);
1882 mutex_unlock(&priv->arl_mutex);
1884 dev_err(ds->dev, "failed to delete MDB entry\n");
1888 EXPORT_SYMBOL(b53_mdb_del);
1890 int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
1891 bool *tx_fwd_offload, struct netlink_ext_ack *extack)
1893 struct b53_device *dev = ds->priv;
1894 s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1898 /* On 7278, port 7 which connects to the ASP should only receive
1899 * traffic from matching CFP rules.
1901 if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
1904 /* Make this port leave the all VLANs join since we will have proper
1905 * VLAN entries from now on
1908 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®);
1910 if ((reg & BIT(cpu_port)) == BIT(cpu_port))
1911 reg &= ~BIT(cpu_port);
1912 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1915 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1917 b53_for_each_port(dev, i) {
1918 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1921 /* Add this local port to the remote port VLAN control
1922 * membership and update the remote port bitmask
1924 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®);
1926 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1927 dev->ports[i].vlan_ctl_mask = reg;
1932 /* Configure the local port VLAN control membership to include
1933 * remote ports and update the local port bitmask
1935 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1936 dev->ports[port].vlan_ctl_mask = pvlan;
1940 EXPORT_SYMBOL(b53_br_join);
1942 void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge)
1944 struct b53_device *dev = ds->priv;
1945 struct b53_vlan *vl = &dev->vlans[0];
1946 s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1948 u16 pvlan, reg, pvid;
1950 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1952 b53_for_each_port(dev, i) {
1953 /* Don't touch the remaining ports */
1954 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1957 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®);
1959 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1960 dev->ports[port].vlan_ctl_mask = reg;
1962 /* Prevent self removal to preserve isolation */
1967 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1968 dev->ports[port].vlan_ctl_mask = pvlan;
1970 pvid = b53_default_pvid(dev);
1972 /* Make this port join all VLANs without VLAN entries */
1974 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®);
1976 if (!(reg & BIT(cpu_port)))
1977 reg |= BIT(cpu_port);
1978 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1980 b53_get_vlan_entry(dev, pvid, vl);
1981 vl->members |= BIT(port) | BIT(cpu_port);
1982 vl->untag |= BIT(port) | BIT(cpu_port);
1983 b53_set_vlan_entry(dev, pvid, vl);
1986 EXPORT_SYMBOL(b53_br_leave);
1988 void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
1990 struct b53_device *dev = ds->priv;
1995 case BR_STATE_DISABLED:
1996 hw_state = PORT_CTRL_DIS_STATE;
1998 case BR_STATE_LISTENING:
1999 hw_state = PORT_CTRL_LISTEN_STATE;
2001 case BR_STATE_LEARNING:
2002 hw_state = PORT_CTRL_LEARN_STATE;
2004 case BR_STATE_FORWARDING:
2005 hw_state = PORT_CTRL_FWD_STATE;
2007 case BR_STATE_BLOCKING:
2008 hw_state = PORT_CTRL_BLOCK_STATE;
2011 dev_err(ds->dev, "invalid STP state: %d\n", state);
2015 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®);
2016 reg &= ~PORT_CTRL_STP_STATE_MASK;
2018 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
2020 EXPORT_SYMBOL(b53_br_set_stp_state);
2022 void b53_br_fast_age(struct dsa_switch *ds, int port)
2024 struct b53_device *dev = ds->priv;
2026 if (b53_fast_age_port(dev, port))
2027 dev_err(ds->dev, "fast ageing failed\n");
2029 EXPORT_SYMBOL(b53_br_fast_age);
2031 int b53_br_flags_pre(struct dsa_switch *ds, int port,
2032 struct switchdev_brport_flags flags,
2033 struct netlink_ext_ack *extack)
2035 if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING))
2040 EXPORT_SYMBOL(b53_br_flags_pre);
2042 int b53_br_flags(struct dsa_switch *ds, int port,
2043 struct switchdev_brport_flags flags,
2044 struct netlink_ext_ack *extack)
2046 if (flags.mask & BR_FLOOD)
2047 b53_port_set_ucast_flood(ds->priv, port,
2048 !!(flags.val & BR_FLOOD));
2049 if (flags.mask & BR_MCAST_FLOOD)
2050 b53_port_set_mcast_flood(ds->priv, port,
2051 !!(flags.val & BR_MCAST_FLOOD));
2052 if (flags.mask & BR_LEARNING)
2053 b53_port_set_learning(ds->priv, port,
2054 !!(flags.val & BR_LEARNING));
2058 EXPORT_SYMBOL(b53_br_flags);
2060 static bool b53_possible_cpu_port(struct dsa_switch *ds, int port)
2062 /* Broadcom switches will accept enabling Broadcom tags on the
2063 * following ports: 5, 7 and 8, any other port is not supported
2066 case B53_CPU_PORT_25:
2075 static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port,
2076 enum dsa_tag_protocol tag_protocol)
2078 bool ret = b53_possible_cpu_port(ds, port);
2081 dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n",
2086 switch (tag_protocol) {
2087 case DSA_TAG_PROTO_BRCM:
2088 case DSA_TAG_PROTO_BRCM_PREPEND:
2090 "Port %d is stacked to Broadcom tag switch\n", port);
2101 enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
2102 enum dsa_tag_protocol mprot)
2104 struct b53_device *dev = ds->priv;
2106 if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
2107 dev->tag_protocol = DSA_TAG_PROTO_NONE;
2111 /* Older models require a different 6 byte tag */
2112 if (is5325(dev) || is5365(dev) || is63xx(dev)) {
2113 dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
2117 /* Broadcom BCM58xx chips have a flow accelerator on Port 8
2118 * which requires us to use the prepended Broadcom tag type
2120 if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) {
2121 dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND;
2125 dev->tag_protocol = DSA_TAG_PROTO_BRCM;
2127 return dev->tag_protocol;
2129 EXPORT_SYMBOL(b53_get_tag_protocol);
2131 int b53_mirror_add(struct dsa_switch *ds, int port,
2132 struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
2133 struct netlink_ext_ack *extack)
2135 struct b53_device *dev = ds->priv;
2139 loc = B53_IG_MIR_CTL;
2141 loc = B53_EG_MIR_CTL;
2143 b53_read16(dev, B53_MGMT_PAGE, loc, ®);
2145 b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2147 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®);
2148 reg &= ~CAP_PORT_MASK;
2149 reg |= mirror->to_local_port;
2151 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2155 EXPORT_SYMBOL(b53_mirror_add);
2157 void b53_mirror_del(struct dsa_switch *ds, int port,
2158 struct dsa_mall_mirror_tc_entry *mirror)
2160 struct b53_device *dev = ds->priv;
2161 bool loc_disable = false, other_loc_disable = false;
2164 if (mirror->ingress)
2165 loc = B53_IG_MIR_CTL;
2167 loc = B53_EG_MIR_CTL;
2169 /* Update the desired ingress/egress register */
2170 b53_read16(dev, B53_MGMT_PAGE, loc, ®);
2172 if (!(reg & MIRROR_MASK))
2174 b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2176 /* Now look at the other one to know if we can disable mirroring
2179 if (mirror->ingress)
2180 b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, ®);
2182 b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, ®);
2183 if (!(reg & MIRROR_MASK))
2184 other_loc_disable = true;
2186 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®);
2187 /* Both no longer have ports, let's disable mirroring */
2188 if (loc_disable && other_loc_disable) {
2190 reg &= ~mirror->to_local_port;
2192 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2194 EXPORT_SYMBOL(b53_mirror_del);
2196 void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
2198 struct b53_device *dev = ds->priv;
2201 b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®);
2206 b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
2208 EXPORT_SYMBOL(b53_eee_enable_set);
2211 /* Returns 0 if EEE was not enabled, or 1 otherwise
2213 int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
2217 ret = phy_init_eee(phy, false);
2221 b53_eee_enable_set(ds, port, true);
2225 EXPORT_SYMBOL(b53_eee_init);
2227 int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
2229 struct b53_device *dev = ds->priv;
2230 struct ethtool_eee *p = &dev->ports[port].eee;
2233 if (is5325(dev) || is5365(dev))
2236 b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, ®);
2237 e->eee_enabled = p->eee_enabled;
2238 e->eee_active = !!(reg & BIT(port));
2242 EXPORT_SYMBOL(b53_get_mac_eee);
2244 int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
2246 struct b53_device *dev = ds->priv;
2247 struct ethtool_eee *p = &dev->ports[port].eee;
2249 if (is5325(dev) || is5365(dev))
2252 p->eee_enabled = e->eee_enabled;
2253 b53_eee_enable_set(ds, port, e->eee_enabled);
2257 EXPORT_SYMBOL(b53_set_mac_eee);
2259 static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
2261 struct b53_device *dev = ds->priv;
2265 if (is5325(dev) || is5365(dev))
2268 enable_jumbo = (mtu >= JMS_MIN_SIZE);
2269 allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID);
2271 return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
2274 static int b53_get_max_mtu(struct dsa_switch *ds, int port)
2276 return JMS_MAX_SIZE;
2279 static const struct dsa_switch_ops b53_switch_ops = {
2280 .get_tag_protocol = b53_get_tag_protocol,
2282 .teardown = b53_teardown,
2283 .get_strings = b53_get_strings,
2284 .get_ethtool_stats = b53_get_ethtool_stats,
2285 .get_sset_count = b53_get_sset_count,
2286 .get_ethtool_phy_stats = b53_get_ethtool_phy_stats,
2287 .phy_read = b53_phy_read16,
2288 .phy_write = b53_phy_write16,
2289 .adjust_link = b53_adjust_link,
2290 .phylink_get_caps = b53_phylink_get_caps,
2291 .phylink_mac_select_pcs = b53_phylink_mac_select_pcs,
2292 .phylink_mac_config = b53_phylink_mac_config,
2293 .phylink_mac_link_down = b53_phylink_mac_link_down,
2294 .phylink_mac_link_up = b53_phylink_mac_link_up,
2295 .port_enable = b53_enable_port,
2296 .port_disable = b53_disable_port,
2297 .get_mac_eee = b53_get_mac_eee,
2298 .set_mac_eee = b53_set_mac_eee,
2299 .port_bridge_join = b53_br_join,
2300 .port_bridge_leave = b53_br_leave,
2301 .port_pre_bridge_flags = b53_br_flags_pre,
2302 .port_bridge_flags = b53_br_flags,
2303 .port_stp_state_set = b53_br_set_stp_state,
2304 .port_fast_age = b53_br_fast_age,
2305 .port_vlan_filtering = b53_vlan_filtering,
2306 .port_vlan_add = b53_vlan_add,
2307 .port_vlan_del = b53_vlan_del,
2308 .port_fdb_dump = b53_fdb_dump,
2309 .port_fdb_add = b53_fdb_add,
2310 .port_fdb_del = b53_fdb_del,
2311 .port_mirror_add = b53_mirror_add,
2312 .port_mirror_del = b53_mirror_del,
2313 .port_mdb_add = b53_mdb_add,
2314 .port_mdb_del = b53_mdb_del,
2315 .port_max_mtu = b53_get_max_mtu,
2316 .port_change_mtu = b53_change_mtu,
2319 struct b53_chip_data {
2321 const char *dev_name;
2334 #define B53_VTA_REGS \
2335 { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
2336 #define B53_VTA_REGS_9798 \
2337 { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
2338 #define B53_VTA_REGS_63XX \
2339 { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
2341 static const struct b53_chip_data b53_switch_chips[] = {
2343 .chip_id = BCM5325_DEVICE_ID,
2344 .dev_name = "BCM5325",
2346 .enabled_ports = 0x3f,
2348 .arl_buckets = 1024,
2350 .duplex_reg = B53_DUPLEX_STAT_FE,
2353 .chip_id = BCM5365_DEVICE_ID,
2354 .dev_name = "BCM5365",
2356 .enabled_ports = 0x3f,
2358 .arl_buckets = 1024,
2360 .duplex_reg = B53_DUPLEX_STAT_FE,
2363 .chip_id = BCM5389_DEVICE_ID,
2364 .dev_name = "BCM5389",
2366 .enabled_ports = 0x11f,
2368 .arl_buckets = 1024,
2370 .vta_regs = B53_VTA_REGS,
2371 .duplex_reg = B53_DUPLEX_STAT_GE,
2372 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2373 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2376 .chip_id = BCM5395_DEVICE_ID,
2377 .dev_name = "BCM5395",
2379 .enabled_ports = 0x11f,
2381 .arl_buckets = 1024,
2383 .vta_regs = B53_VTA_REGS,
2384 .duplex_reg = B53_DUPLEX_STAT_GE,
2385 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2386 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2389 .chip_id = BCM5397_DEVICE_ID,
2390 .dev_name = "BCM5397",
2392 .enabled_ports = 0x11f,
2394 .arl_buckets = 1024,
2396 .vta_regs = B53_VTA_REGS_9798,
2397 .duplex_reg = B53_DUPLEX_STAT_GE,
2398 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2399 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2402 .chip_id = BCM5398_DEVICE_ID,
2403 .dev_name = "BCM5398",
2405 .enabled_ports = 0x17f,
2407 .arl_buckets = 1024,
2409 .vta_regs = B53_VTA_REGS_9798,
2410 .duplex_reg = B53_DUPLEX_STAT_GE,
2411 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2412 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2415 .chip_id = BCM53115_DEVICE_ID,
2416 .dev_name = "BCM53115",
2418 .enabled_ports = 0x11f,
2420 .arl_buckets = 1024,
2421 .vta_regs = B53_VTA_REGS,
2423 .duplex_reg = B53_DUPLEX_STAT_GE,
2424 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2425 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2428 .chip_id = BCM53125_DEVICE_ID,
2429 .dev_name = "BCM53125",
2431 .enabled_ports = 0x1ff,
2433 .arl_buckets = 1024,
2435 .vta_regs = B53_VTA_REGS,
2436 .duplex_reg = B53_DUPLEX_STAT_GE,
2437 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2438 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2441 .chip_id = BCM53128_DEVICE_ID,
2442 .dev_name = "BCM53128",
2444 .enabled_ports = 0x1ff,
2446 .arl_buckets = 1024,
2448 .vta_regs = B53_VTA_REGS,
2449 .duplex_reg = B53_DUPLEX_STAT_GE,
2450 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2451 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2454 .chip_id = BCM63XX_DEVICE_ID,
2455 .dev_name = "BCM63xx",
2457 .enabled_ports = 0, /* pdata must provide them */
2459 .arl_buckets = 1024,
2461 .vta_regs = B53_VTA_REGS_63XX,
2462 .duplex_reg = B53_DUPLEX_STAT_63XX,
2463 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
2464 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
2467 .chip_id = BCM63268_DEVICE_ID,
2468 .dev_name = "BCM63268",
2470 .enabled_ports = 0, /* pdata must provide them */
2472 .arl_buckets = 1024,
2474 .vta_regs = B53_VTA_REGS_63XX,
2475 .duplex_reg = B53_DUPLEX_STAT_63XX,
2476 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
2477 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
2480 .chip_id = BCM53010_DEVICE_ID,
2481 .dev_name = "BCM53010",
2483 .enabled_ports = 0x1bf,
2485 .arl_buckets = 1024,
2487 .vta_regs = B53_VTA_REGS,
2488 .duplex_reg = B53_DUPLEX_STAT_GE,
2489 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2490 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2493 .chip_id = BCM53011_DEVICE_ID,
2494 .dev_name = "BCM53011",
2496 .enabled_ports = 0x1bf,
2498 .arl_buckets = 1024,
2500 .vta_regs = B53_VTA_REGS,
2501 .duplex_reg = B53_DUPLEX_STAT_GE,
2502 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2503 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2506 .chip_id = BCM53012_DEVICE_ID,
2507 .dev_name = "BCM53012",
2509 .enabled_ports = 0x1bf,
2511 .arl_buckets = 1024,
2513 .vta_regs = B53_VTA_REGS,
2514 .duplex_reg = B53_DUPLEX_STAT_GE,
2515 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2516 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2519 .chip_id = BCM53018_DEVICE_ID,
2520 .dev_name = "BCM53018",
2522 .enabled_ports = 0x1bf,
2524 .arl_buckets = 1024,
2526 .vta_regs = B53_VTA_REGS,
2527 .duplex_reg = B53_DUPLEX_STAT_GE,
2528 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2529 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2532 .chip_id = BCM53019_DEVICE_ID,
2533 .dev_name = "BCM53019",
2535 .enabled_ports = 0x1bf,
2537 .arl_buckets = 1024,
2539 .vta_regs = B53_VTA_REGS,
2540 .duplex_reg = B53_DUPLEX_STAT_GE,
2541 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2542 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2545 .chip_id = BCM58XX_DEVICE_ID,
2546 .dev_name = "BCM585xx/586xx/88312",
2548 .enabled_ports = 0x1ff,
2550 .arl_buckets = 1024,
2552 .vta_regs = B53_VTA_REGS,
2553 .duplex_reg = B53_DUPLEX_STAT_GE,
2554 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2555 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2558 .chip_id = BCM583XX_DEVICE_ID,
2559 .dev_name = "BCM583xx/11360",
2561 .enabled_ports = 0x103,
2563 .arl_buckets = 1024,
2565 .vta_regs = B53_VTA_REGS,
2566 .duplex_reg = B53_DUPLEX_STAT_GE,
2567 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2568 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2572 .chip_id = BCM4908_DEVICE_ID,
2573 .dev_name = "BCM4908",
2575 .enabled_ports = 0x1bf,
2579 .vta_regs = B53_VTA_REGS,
2580 .duplex_reg = B53_DUPLEX_STAT_GE,
2581 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2582 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2585 .chip_id = BCM7445_DEVICE_ID,
2586 .dev_name = "BCM7445",
2588 .enabled_ports = 0x1ff,
2590 .arl_buckets = 1024,
2592 .vta_regs = B53_VTA_REGS,
2593 .duplex_reg = B53_DUPLEX_STAT_GE,
2594 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2595 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2598 .chip_id = BCM7278_DEVICE_ID,
2599 .dev_name = "BCM7278",
2601 .enabled_ports = 0x1ff,
2605 .vta_regs = B53_VTA_REGS,
2606 .duplex_reg = B53_DUPLEX_STAT_GE,
2607 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2608 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2611 .chip_id = BCM53134_DEVICE_ID,
2612 .dev_name = "BCM53134",
2614 .enabled_ports = 0x12f,
2616 .cpu_port = B53_CPU_PORT,
2617 .vta_regs = B53_VTA_REGS,
2619 .arl_buckets = 1024,
2620 .duplex_reg = B53_DUPLEX_STAT_GE,
2621 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2622 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2626 static int b53_switch_init(struct b53_device *dev)
2631 for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
2632 const struct b53_chip_data *chip = &b53_switch_chips[i];
2634 if (chip->chip_id == dev->chip_id) {
2635 if (!dev->enabled_ports)
2636 dev->enabled_ports = chip->enabled_ports;
2637 dev->name = chip->dev_name;
2638 dev->duplex_reg = chip->duplex_reg;
2639 dev->vta_regs[0] = chip->vta_regs[0];
2640 dev->vta_regs[1] = chip->vta_regs[1];
2641 dev->vta_regs[2] = chip->vta_regs[2];
2642 dev->jumbo_pm_reg = chip->jumbo_pm_reg;
2643 dev->imp_port = chip->imp_port;
2644 dev->num_vlans = chip->vlans;
2645 dev->num_arl_bins = chip->arl_bins;
2646 dev->num_arl_buckets = chip->arl_buckets;
2651 /* check which BCM5325x version we have */
2655 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
2657 /* check reserved bits */
2663 /* BCM5325F - do not use port 4 */
2664 dev->enabled_ports &= ~BIT(4);
2667 /* On the BCM47XX SoCs this is the supported internal switch.*/
2668 #ifndef CONFIG_BCM47XX
2677 dev->num_ports = fls(dev->enabled_ports);
2679 dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
2681 /* Include non standard CPU port built-in PHYs to be probed */
2682 if (is539x(dev) || is531x5(dev)) {
2683 for (i = 0; i < dev->num_ports; i++) {
2684 if (!(dev->ds->phys_mii_mask & BIT(i)) &&
2685 !b53_possible_cpu_port(dev->ds, i))
2686 dev->ds->phys_mii_mask |= BIT(i);
2690 dev->ports = devm_kcalloc(dev->dev,
2691 dev->num_ports, sizeof(struct b53_port),
2696 dev->vlans = devm_kcalloc(dev->dev,
2697 dev->num_vlans, sizeof(struct b53_vlan),
2702 dev->reset_gpio = b53_switch_get_reset_gpio(dev);
2703 if (dev->reset_gpio >= 0) {
2704 ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
2705 GPIOF_OUT_INIT_HIGH, "robo_reset");
2713 struct b53_device *b53_switch_alloc(struct device *base,
2714 const struct b53_io_ops *ops,
2717 struct dsa_switch *ds;
2718 struct b53_device *dev;
2720 ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
2726 dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
2736 ds->ops = &b53_switch_ops;
2737 dev->vlan_enabled = true;
2738 /* Let DSA handle the case were multiple bridges span the same switch
2739 * device and different VLAN awareness settings are requested, which
2740 * would be breaking filtering semantics for any of the other bridge
2741 * devices. (not hardware supported)
2743 ds->vlan_filtering_is_global = true;
2745 mutex_init(&dev->reg_mutex);
2746 mutex_init(&dev->stats_mutex);
2747 mutex_init(&dev->arl_mutex);
2751 EXPORT_SYMBOL(b53_switch_alloc);
2753 int b53_switch_detect(struct b53_device *dev)
2760 ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
2766 /* BCM5325 and BCM5365 do not have this register so reads
2767 * return 0. But the read operation did succeed, so assume this
2770 * Next check if we can write to the 5325's VTA register; for
2771 * 5365 it is read only.
2773 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
2774 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
2777 dev->chip_id = BCM5325_DEVICE_ID;
2779 dev->chip_id = BCM5365_DEVICE_ID;
2781 case BCM5389_DEVICE_ID:
2782 case BCM5395_DEVICE_ID:
2783 case BCM5397_DEVICE_ID:
2784 case BCM5398_DEVICE_ID:
2788 ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
2793 case BCM53115_DEVICE_ID:
2794 case BCM53125_DEVICE_ID:
2795 case BCM53128_DEVICE_ID:
2796 case BCM53010_DEVICE_ID:
2797 case BCM53011_DEVICE_ID:
2798 case BCM53012_DEVICE_ID:
2799 case BCM53018_DEVICE_ID:
2800 case BCM53019_DEVICE_ID:
2801 case BCM53134_DEVICE_ID:
2802 dev->chip_id = id32;
2806 "unsupported switch detected (BCM53%02x/BCM%x)\n",
2812 if (dev->chip_id == BCM5325_DEVICE_ID)
2813 return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
2816 return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
2819 EXPORT_SYMBOL(b53_switch_detect);
2821 int b53_switch_register(struct b53_device *dev)
2826 dev->chip_id = dev->pdata->chip_id;
2827 dev->enabled_ports = dev->pdata->enabled_ports;
2830 if (!dev->chip_id && b53_switch_detect(dev))
2833 ret = b53_switch_init(dev);
2837 dev_info(dev->dev, "found switch: %s, rev %i\n",
2838 dev->name, dev->core_rev);
2840 return dsa_register_switch(dev->ds);
2842 EXPORT_SYMBOL(b53_switch_register);
2844 MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
2845 MODULE_DESCRIPTION("B53 switch library");
2846 MODULE_LICENSE("Dual BSD/GPL");