2 * sun4i_can.c - CAN bus controller driver for Allwinner SUN4I&SUN7I based SoCs
4 * Copyright (C) 2013 Peter Chen
5 * Copyright (C) 2015 Gerhard Bertelsmann
8 * Parts of this software are based on (derived from) the SJA1000 code by:
9 * Copyright (C) 2014 Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
10 * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
11 * Copyright (C) 2002-2007 Volkswagen Group Electronic Research
12 * Copyright (C) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
13 * 38106 Braunschweig, GERMANY
15 * Redistribution and use in source and binary forms, with or without
16 * modification, are permitted provided that the following conditions
18 * 1. Redistributions of source code must retain the above copyright
19 * notice, this list of conditions and the following disclaimer.
20 * 2. Redistributions in binary form must reproduce the above copyright
21 * notice, this list of conditions and the following disclaimer in the
22 * documentation and/or other materials provided with the distribution.
23 * 3. Neither the name of Volkswagen nor the names of its contributors
24 * may be used to endorse or promote products derived from this software
25 * without specific prior written permission.
27 * Alternatively, provided that this notice is retained in full, this
28 * software may be distributed under the terms of the GNU General
29 * Public License ("GPL") version 2, in which case the provisions of the
30 * GPL apply INSTEAD OF those given above.
32 * The provided data structures and external interfaces from this code
33 * are not restricted to be used by modules with a GPL compatible license.
35 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
36 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
37 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
38 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
39 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
40 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
41 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
42 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
43 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
44 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
45 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
50 #include <linux/netdevice.h>
51 #include <linux/can.h>
52 #include <linux/can/dev.h>
53 #include <linux/can/error.h>
54 #include <linux/can/led.h>
55 #include <linux/clk.h>
56 #include <linux/delay.h>
57 #include <linux/interrupt.h>
58 #include <linux/init.h>
60 #include <linux/module.h>
62 #include <linux/of_device.h>
63 #include <linux/platform_device.h>
65 #define DRV_NAME "sun4i_can"
67 /* Registers address (physical base address 0x01C2BC00) */
68 #define SUN4I_REG_MSEL_ADDR 0x0000 /* CAN Mode Select */
69 #define SUN4I_REG_CMD_ADDR 0x0004 /* CAN Command */
70 #define SUN4I_REG_STA_ADDR 0x0008 /* CAN Status */
71 #define SUN4I_REG_INT_ADDR 0x000c /* CAN Interrupt Flag */
72 #define SUN4I_REG_INTEN_ADDR 0x0010 /* CAN Interrupt Enable */
73 #define SUN4I_REG_BTIME_ADDR 0x0014 /* CAN Bus Timing 0 */
74 #define SUN4I_REG_TEWL_ADDR 0x0018 /* CAN Tx Error Warning Limit */
75 #define SUN4I_REG_ERRC_ADDR 0x001c /* CAN Error Counter */
76 #define SUN4I_REG_RMCNT_ADDR 0x0020 /* CAN Receive Message Counter */
77 #define SUN4I_REG_RBUFSA_ADDR 0x0024 /* CAN Receive Buffer Start Address */
78 #define SUN4I_REG_BUF0_ADDR 0x0040 /* CAN Tx/Rx Buffer 0 */
79 #define SUN4I_REG_BUF1_ADDR 0x0044 /* CAN Tx/Rx Buffer 1 */
80 #define SUN4I_REG_BUF2_ADDR 0x0048 /* CAN Tx/Rx Buffer 2 */
81 #define SUN4I_REG_BUF3_ADDR 0x004c /* CAN Tx/Rx Buffer 3 */
82 #define SUN4I_REG_BUF4_ADDR 0x0050 /* CAN Tx/Rx Buffer 4 */
83 #define SUN4I_REG_BUF5_ADDR 0x0054 /* CAN Tx/Rx Buffer 5 */
84 #define SUN4I_REG_BUF6_ADDR 0x0058 /* CAN Tx/Rx Buffer 6 */
85 #define SUN4I_REG_BUF7_ADDR 0x005c /* CAN Tx/Rx Buffer 7 */
86 #define SUN4I_REG_BUF8_ADDR 0x0060 /* CAN Tx/Rx Buffer 8 */
87 #define SUN4I_REG_BUF9_ADDR 0x0064 /* CAN Tx/Rx Buffer 9 */
88 #define SUN4I_REG_BUF10_ADDR 0x0068 /* CAN Tx/Rx Buffer 10 */
89 #define SUN4I_REG_BUF11_ADDR 0x006c /* CAN Tx/Rx Buffer 11 */
90 #define SUN4I_REG_BUF12_ADDR 0x0070 /* CAN Tx/Rx Buffer 12 */
91 #define SUN4I_REG_ACPC_ADDR 0x0040 /* CAN Acceptance Code 0 */
92 #define SUN4I_REG_ACPM_ADDR 0x0044 /* CAN Acceptance Mask 0 */
93 #define SUN4I_REG_RBUF_RBACK_START_ADDR 0x0180 /* CAN transmit buffer start */
94 #define SUN4I_REG_RBUF_RBACK_END_ADDR 0x01b0 /* CAN transmit buffer end */
96 /* Controller Register Description */
98 /* mode select register (r/w)
99 * offset:0x0000 default:0x0000_0001
101 #define SUN4I_MSEL_SLEEP_MODE (0x01 << 4) /* write in reset mode */
102 #define SUN4I_MSEL_WAKE_UP (0x00 << 4)
103 #define SUN4I_MSEL_SINGLE_FILTER (0x01 << 3) /* write in reset mode */
104 #define SUN4I_MSEL_DUAL_FILTERS (0x00 << 3)
105 #define SUN4I_MSEL_LOOPBACK_MODE BIT(2)
106 #define SUN4I_MSEL_LISTEN_ONLY_MODE BIT(1)
107 #define SUN4I_MSEL_RESET_MODE BIT(0)
109 /* command register (w)
110 * offset:0x0004 default:0x0000_0000
112 #define SUN4I_CMD_BUS_OFF_REQ BIT(5)
113 #define SUN4I_CMD_SELF_RCV_REQ BIT(4)
114 #define SUN4I_CMD_CLEAR_OR_FLAG BIT(3)
115 #define SUN4I_CMD_RELEASE_RBUF BIT(2)
116 #define SUN4I_CMD_ABORT_REQ BIT(1)
117 #define SUN4I_CMD_TRANS_REQ BIT(0)
119 /* status register (r)
120 * offset:0x0008 default:0x0000_003c
122 #define SUN4I_STA_BIT_ERR (0x00 << 22)
123 #define SUN4I_STA_FORM_ERR (0x01 << 22)
124 #define SUN4I_STA_STUFF_ERR (0x02 << 22)
125 #define SUN4I_STA_OTHER_ERR (0x03 << 22)
126 #define SUN4I_STA_MASK_ERR (0x03 << 22)
127 #define SUN4I_STA_ERR_DIR BIT(21)
128 #define SUN4I_STA_ERR_SEG_CODE (0x1f << 16)
129 #define SUN4I_STA_START (0x03 << 16)
130 #define SUN4I_STA_ID28_21 (0x02 << 16)
131 #define SUN4I_STA_ID20_18 (0x06 << 16)
132 #define SUN4I_STA_SRTR (0x04 << 16)
133 #define SUN4I_STA_IDE (0x05 << 16)
134 #define SUN4I_STA_ID17_13 (0x07 << 16)
135 #define SUN4I_STA_ID12_5 (0x0f << 16)
136 #define SUN4I_STA_ID4_0 (0x0e << 16)
137 #define SUN4I_STA_RTR (0x0c << 16)
138 #define SUN4I_STA_RB1 (0x0d << 16)
139 #define SUN4I_STA_RB0 (0x09 << 16)
140 #define SUN4I_STA_DLEN (0x0b << 16)
141 #define SUN4I_STA_DATA_FIELD (0x0a << 16)
142 #define SUN4I_STA_CRC_SEQUENCE (0x08 << 16)
143 #define SUN4I_STA_CRC_DELIMITER (0x18 << 16)
144 #define SUN4I_STA_ACK (0x19 << 16)
145 #define SUN4I_STA_ACK_DELIMITER (0x1b << 16)
146 #define SUN4I_STA_END (0x1a << 16)
147 #define SUN4I_STA_INTERMISSION (0x12 << 16)
148 #define SUN4I_STA_ACTIVE_ERROR (0x11 << 16)
149 #define SUN4I_STA_PASSIVE_ERROR (0x16 << 16)
150 #define SUN4I_STA_TOLERATE_DOMINANT_BITS (0x13 << 16)
151 #define SUN4I_STA_ERROR_DELIMITER (0x17 << 16)
152 #define SUN4I_STA_OVERLOAD (0x1c << 16)
153 #define SUN4I_STA_BUS_OFF BIT(7)
154 #define SUN4I_STA_ERR_STA BIT(6)
155 #define SUN4I_STA_TRANS_BUSY BIT(5)
156 #define SUN4I_STA_RCV_BUSY BIT(4)
157 #define SUN4I_STA_TRANS_OVER BIT(3)
158 #define SUN4I_STA_TBUF_RDY BIT(2)
159 #define SUN4I_STA_DATA_ORUN BIT(1)
160 #define SUN4I_STA_RBUF_RDY BIT(0)
162 /* interrupt register (r)
163 * offset:0x000c default:0x0000_0000
165 #define SUN4I_INT_BUS_ERR BIT(7)
166 #define SUN4I_INT_ARB_LOST BIT(6)
167 #define SUN4I_INT_ERR_PASSIVE BIT(5)
168 #define SUN4I_INT_WAKEUP BIT(4)
169 #define SUN4I_INT_DATA_OR BIT(3)
170 #define SUN4I_INT_ERR_WRN BIT(2)
171 #define SUN4I_INT_TBUF_VLD BIT(1)
172 #define SUN4I_INT_RBUF_VLD BIT(0)
174 /* interrupt enable register (r/w)
175 * offset:0x0010 default:0x0000_0000
177 #define SUN4I_INTEN_BERR BIT(7)
178 #define SUN4I_INTEN_ARB_LOST BIT(6)
179 #define SUN4I_INTEN_ERR_PASSIVE BIT(5)
180 #define SUN4I_INTEN_WAKEUP BIT(4)
181 #define SUN4I_INTEN_OR BIT(3)
182 #define SUN4I_INTEN_ERR_WRN BIT(2)
183 #define SUN4I_INTEN_TX BIT(1)
184 #define SUN4I_INTEN_RX BIT(0)
187 #define SUN4I_ERR_INRCV (0x1 << 5)
188 #define SUN4I_ERR_INTRANS (0x0 << 5)
191 #define SUN4I_FILTER_CLOSE 0
192 #define SUN4I_SINGLE_FLTER_MODE 1
193 #define SUN4I_DUAL_FILTER_MODE 2
195 /* message buffer flags */
196 #define SUN4I_MSG_EFF_FLAG BIT(7)
197 #define SUN4I_MSG_RTR_FLAG BIT(6)
199 /* max. number of interrupts handled in ISR */
200 #define SUN4I_CAN_MAX_IRQ 20
201 #define SUN4I_MODE_MAX_RETRIES 100
203 struct sun4ican_priv {
207 spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */
210 static const struct can_bittiming_const sun4ican_bittiming_const = {
222 static void sun4i_can_write_cmdreg(struct sun4ican_priv *priv, u8 val)
226 spin_lock_irqsave(&priv->cmdreg_lock, flags);
227 writel(val, priv->base + SUN4I_REG_CMD_ADDR);
228 spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
231 static int set_normal_mode(struct net_device *dev)
233 struct sun4ican_priv *priv = netdev_priv(dev);
234 int retry = SUN4I_MODE_MAX_RETRIES;
238 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
239 mod_reg_val &= ~SUN4I_MSEL_RESET_MODE;
240 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
241 } while (retry-- && (mod_reg_val & SUN4I_MSEL_RESET_MODE));
243 if (readl(priv->base + SUN4I_REG_MSEL_ADDR) & SUN4I_MSEL_RESET_MODE) {
245 "setting controller into normal mode failed!\n");
252 static int set_reset_mode(struct net_device *dev)
254 struct sun4ican_priv *priv = netdev_priv(dev);
255 int retry = SUN4I_MODE_MAX_RETRIES;
259 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
260 mod_reg_val |= SUN4I_MSEL_RESET_MODE;
261 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
262 } while (retry-- && !(mod_reg_val & SUN4I_MSEL_RESET_MODE));
264 if (!(readl(priv->base + SUN4I_REG_MSEL_ADDR) &
265 SUN4I_MSEL_RESET_MODE)) {
266 netdev_err(dev, "setting controller into reset mode failed!\n");
273 /* bittiming is called in reset_mode only */
274 static int sun4ican_set_bittiming(struct net_device *dev)
276 struct sun4ican_priv *priv = netdev_priv(dev);
277 struct can_bittiming *bt = &priv->can.bittiming;
280 cfg = ((bt->brp - 1) & 0x3FF) |
281 (((bt->sjw - 1) & 0x3) << 14) |
282 (((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) << 16) |
283 (((bt->phase_seg2 - 1) & 0x7) << 20);
284 if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
287 netdev_dbg(dev, "setting BITTIMING=0x%08x\n", cfg);
288 writel(cfg, priv->base + SUN4I_REG_BTIME_ADDR);
293 static int sun4ican_get_berr_counter(const struct net_device *dev,
294 struct can_berr_counter *bec)
296 struct sun4ican_priv *priv = netdev_priv(dev);
300 err = clk_prepare_enable(priv->clk);
302 netdev_err(dev, "could not enable clock\n");
306 errors = readl(priv->base + SUN4I_REG_ERRC_ADDR);
308 bec->txerr = errors & 0xFF;
309 bec->rxerr = (errors >> 16) & 0xFF;
311 clk_disable_unprepare(priv->clk);
316 static int sun4i_can_start(struct net_device *dev)
318 struct sun4ican_priv *priv = netdev_priv(dev);
322 /* we need to enter the reset mode */
323 err = set_reset_mode(dev);
325 netdev_err(dev, "could not enter reset mode\n");
329 /* set filters - we accept all */
330 writel(0x00000000, priv->base + SUN4I_REG_ACPC_ADDR);
331 writel(0xFFFFFFFF, priv->base + SUN4I_REG_ACPM_ADDR);
333 /* clear error counters and error code capture */
334 writel(0, priv->base + SUN4I_REG_ERRC_ADDR);
336 /* enable interrupts */
337 if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
338 writel(0xFF, priv->base + SUN4I_REG_INTEN_ADDR);
340 writel(0xFF & ~SUN4I_INTEN_BERR,
341 priv->base + SUN4I_REG_INTEN_ADDR);
343 /* enter the selected mode */
344 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
345 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
346 mod_reg_val |= SUN4I_MSEL_LOOPBACK_MODE;
347 else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
348 mod_reg_val |= SUN4I_MSEL_LISTEN_ONLY_MODE;
349 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
351 err = sun4ican_set_bittiming(dev);
355 /* we are ready to enter the normal mode */
356 err = set_normal_mode(dev);
358 netdev_err(dev, "could not enter normal mode\n");
362 priv->can.state = CAN_STATE_ERROR_ACTIVE;
367 static int sun4i_can_stop(struct net_device *dev)
369 struct sun4ican_priv *priv = netdev_priv(dev);
372 priv->can.state = CAN_STATE_STOPPED;
373 /* we need to enter reset mode */
374 err = set_reset_mode(dev);
376 netdev_err(dev, "could not enter reset mode\n");
380 /* disable all interrupts */
381 writel(0, priv->base + SUN4I_REG_INTEN_ADDR);
386 static int sun4ican_set_mode(struct net_device *dev, enum can_mode mode)
392 err = sun4i_can_start(dev);
394 netdev_err(dev, "starting CAN controller failed!\n");
397 if (netif_queue_stopped(dev))
398 netif_wake_queue(dev);
407 /* transmit a CAN message
408 * message layout in the sk_buff should be like this:
409 * xx xx xx xx ff ll 00 11 22 33 44 55 66 77
410 * [ can_id ] [flags] [len] [can data (up to 8 bytes]
412 static int sun4ican_start_xmit(struct sk_buff *skb, struct net_device *dev)
414 struct sun4ican_priv *priv = netdev_priv(dev);
415 struct can_frame *cf = (struct can_frame *)skb->data;
417 u32 dreg, msg_flag_n;
421 if (can_dropped_invalid_skb(dev, skb))
424 netif_stop_queue(dev);
430 if (id & CAN_RTR_FLAG)
431 msg_flag_n |= SUN4I_MSG_RTR_FLAG;
433 if (id & CAN_EFF_FLAG) {
434 msg_flag_n |= SUN4I_MSG_EFF_FLAG;
435 dreg = SUN4I_REG_BUF5_ADDR;
436 writel((id >> 21) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
437 writel((id >> 13) & 0xFF, priv->base + SUN4I_REG_BUF2_ADDR);
438 writel((id >> 5) & 0xFF, priv->base + SUN4I_REG_BUF3_ADDR);
439 writel((id << 3) & 0xF8, priv->base + SUN4I_REG_BUF4_ADDR);
441 dreg = SUN4I_REG_BUF3_ADDR;
442 writel((id >> 3) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
443 writel((id << 5) & 0xE0, priv->base + SUN4I_REG_BUF2_ADDR);
446 for (i = 0; i < dlc; i++)
447 writel(cf->data[i], priv->base + (dreg + i * 4));
449 writel(msg_flag_n, priv->base + SUN4I_REG_BUF0_ADDR);
451 can_put_echo_skb(skb, dev, 0);
453 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
454 sun4i_can_write_cmdreg(priv, SUN4I_CMD_SELF_RCV_REQ);
456 sun4i_can_write_cmdreg(priv, SUN4I_CMD_TRANS_REQ);
461 static void sun4i_can_rx(struct net_device *dev)
463 struct sun4ican_priv *priv = netdev_priv(dev);
464 struct net_device_stats *stats = &dev->stats;
465 struct can_frame *cf;
472 /* create zero'ed CAN frame buffer */
473 skb = alloc_can_skb(dev, &cf);
477 fi = readl(priv->base + SUN4I_REG_BUF0_ADDR);
478 cf->can_dlc = get_can_dlc(fi & 0x0F);
479 if (fi & SUN4I_MSG_EFF_FLAG) {
480 dreg = SUN4I_REG_BUF5_ADDR;
481 id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 21) |
482 (readl(priv->base + SUN4I_REG_BUF2_ADDR) << 13) |
483 (readl(priv->base + SUN4I_REG_BUF3_ADDR) << 5) |
484 ((readl(priv->base + SUN4I_REG_BUF4_ADDR) >> 3) & 0x1f);
487 dreg = SUN4I_REG_BUF3_ADDR;
488 id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 3) |
489 ((readl(priv->base + SUN4I_REG_BUF2_ADDR) >> 5) & 0x7);
493 if (fi & SUN4I_MSG_RTR_FLAG)
496 for (i = 0; i < cf->can_dlc; i++)
497 cf->data[i] = readl(priv->base + dreg + i * 4);
501 sun4i_can_write_cmdreg(priv, SUN4I_CMD_RELEASE_RBUF);
504 stats->rx_bytes += cf->can_dlc;
507 can_led_event(dev, CAN_LED_EVENT_RX);
510 static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status)
512 struct sun4ican_priv *priv = netdev_priv(dev);
513 struct net_device_stats *stats = &dev->stats;
514 struct can_frame *cf;
516 enum can_state state = priv->can.state;
517 enum can_state rx_state, tx_state;
518 unsigned int rxerr, txerr, errc;
521 /* we don't skip if alloc fails because we want the stats anyhow */
522 skb = alloc_can_err_skb(dev, &cf);
524 errc = readl(priv->base + SUN4I_REG_ERRC_ADDR);
525 rxerr = (errc >> 16) & 0xFF;
528 if (isrc & SUN4I_INT_DATA_OR) {
529 /* data overrun interrupt */
530 netdev_dbg(dev, "data overrun interrupt\n");
532 cf->can_id |= CAN_ERR_CRTL;
533 cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
535 stats->rx_over_errors++;
538 /* reset the CAN IP by entering reset mode
539 * ignoring timeout error
542 set_normal_mode(dev);
545 sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG);
547 if (isrc & SUN4I_INT_ERR_WRN) {
548 /* error warning interrupt */
549 netdev_dbg(dev, "error warning interrupt\n");
551 if (status & SUN4I_STA_BUS_OFF)
552 state = CAN_STATE_BUS_OFF;
553 else if (status & SUN4I_STA_ERR_STA)
554 state = CAN_STATE_ERROR_WARNING;
556 state = CAN_STATE_ERROR_ACTIVE;
558 if (skb && state != CAN_STATE_BUS_OFF) {
562 if (isrc & SUN4I_INT_BUS_ERR) {
563 /* bus error interrupt */
564 netdev_dbg(dev, "bus error interrupt\n");
565 priv->can.can_stats.bus_error++;
569 ecc = readl(priv->base + SUN4I_REG_STA_ADDR);
571 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
573 switch (ecc & SUN4I_STA_MASK_ERR) {
574 case SUN4I_STA_BIT_ERR:
575 cf->data[2] |= CAN_ERR_PROT_BIT;
577 case SUN4I_STA_FORM_ERR:
578 cf->data[2] |= CAN_ERR_PROT_FORM;
580 case SUN4I_STA_STUFF_ERR:
581 cf->data[2] |= CAN_ERR_PROT_STUFF;
584 cf->data[3] = (ecc & SUN4I_STA_ERR_SEG_CODE)
588 /* error occurred during transmission? */
589 if ((ecc & SUN4I_STA_ERR_DIR) == 0)
590 cf->data[2] |= CAN_ERR_PROT_TX;
593 if (isrc & SUN4I_INT_ERR_PASSIVE) {
594 /* error passive interrupt */
595 netdev_dbg(dev, "error passive interrupt\n");
596 if (state == CAN_STATE_ERROR_PASSIVE)
597 state = CAN_STATE_ERROR_WARNING;
599 state = CAN_STATE_ERROR_PASSIVE;
601 if (isrc & SUN4I_INT_ARB_LOST) {
602 /* arbitration lost interrupt */
603 netdev_dbg(dev, "arbitration lost interrupt\n");
604 alc = readl(priv->base + SUN4I_REG_STA_ADDR);
605 priv->can.can_stats.arbitration_lost++;
608 cf->can_id |= CAN_ERR_LOSTARB;
609 cf->data[0] = (alc >> 8) & 0x1f;
613 if (state != priv->can.state) {
614 tx_state = txerr >= rxerr ? state : 0;
615 rx_state = txerr <= rxerr ? state : 0;
618 can_change_state(dev, cf, tx_state, rx_state);
620 priv->can.state = state;
621 if (state == CAN_STATE_BUS_OFF)
627 stats->rx_bytes += cf->can_dlc;
636 static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id)
638 struct net_device *dev = (struct net_device *)dev_id;
639 struct sun4ican_priv *priv = netdev_priv(dev);
640 struct net_device_stats *stats = &dev->stats;
644 while ((isrc = readl(priv->base + SUN4I_REG_INT_ADDR)) &&
645 (n < SUN4I_CAN_MAX_IRQ)) {
647 status = readl(priv->base + SUN4I_REG_STA_ADDR);
649 if (isrc & SUN4I_INT_WAKEUP)
650 netdev_warn(dev, "wakeup interrupt\n");
652 if (isrc & SUN4I_INT_TBUF_VLD) {
653 /* transmission complete interrupt */
656 SUN4I_REG_RBUF_RBACK_START_ADDR) & 0xf;
658 can_get_echo_skb(dev, 0);
659 netif_wake_queue(dev);
660 can_led_event(dev, CAN_LED_EVENT_TX);
662 if ((isrc & SUN4I_INT_RBUF_VLD) &&
663 !(isrc & SUN4I_INT_DATA_OR)) {
664 /* receive interrupt - don't read if overrun occurred */
665 while (status & SUN4I_STA_RBUF_RDY) {
666 /* RX buffer is not empty */
668 status = readl(priv->base + SUN4I_REG_STA_ADDR);
672 (SUN4I_INT_DATA_OR | SUN4I_INT_ERR_WRN | SUN4I_INT_BUS_ERR |
673 SUN4I_INT_ERR_PASSIVE | SUN4I_INT_ARB_LOST)) {
674 /* error interrupt */
675 if (sun4i_can_err(dev, isrc, status))
676 netdev_err(dev, "can't allocate buffer - clearing pending interrupts\n");
678 /* clear interrupts */
679 writel(isrc, priv->base + SUN4I_REG_INT_ADDR);
680 readl(priv->base + SUN4I_REG_INT_ADDR);
682 if (n >= SUN4I_CAN_MAX_IRQ)
683 netdev_dbg(dev, "%d messages handled in ISR", n);
685 return (n) ? IRQ_HANDLED : IRQ_NONE;
688 static int sun4ican_open(struct net_device *dev)
690 struct sun4ican_priv *priv = netdev_priv(dev);
694 err = open_candev(dev);
698 /* register interrupt handler */
699 err = request_irq(dev->irq, sun4i_can_interrupt, 0, dev->name, dev);
701 netdev_err(dev, "request_irq err: %d\n", err);
705 /* turn on clocking for CAN peripheral block */
706 err = clk_prepare_enable(priv->clk);
708 netdev_err(dev, "could not enable CAN peripheral clock\n");
712 err = sun4i_can_start(dev);
714 netdev_err(dev, "could not start CAN peripheral\n");
718 can_led_event(dev, CAN_LED_EVENT_OPEN);
719 netif_start_queue(dev);
724 clk_disable_unprepare(priv->clk);
726 free_irq(dev->irq, dev);
732 static int sun4ican_close(struct net_device *dev)
734 struct sun4ican_priv *priv = netdev_priv(dev);
736 netif_stop_queue(dev);
738 clk_disable_unprepare(priv->clk);
740 free_irq(dev->irq, dev);
742 can_led_event(dev, CAN_LED_EVENT_STOP);
747 static const struct net_device_ops sun4ican_netdev_ops = {
748 .ndo_open = sun4ican_open,
749 .ndo_stop = sun4ican_close,
750 .ndo_start_xmit = sun4ican_start_xmit,
753 static const struct of_device_id sun4ican_of_match[] = {
754 {.compatible = "allwinner,sun4i-a10-can"},
758 MODULE_DEVICE_TABLE(of, sun4ican_of_match);
760 static int sun4ican_remove(struct platform_device *pdev)
762 struct net_device *dev = platform_get_drvdata(pdev);
764 unregister_netdev(dev);
770 static int sun4ican_probe(struct platform_device *pdev)
772 struct device_node *np = pdev->dev.of_node;
773 struct resource *mem;
777 struct net_device *dev;
778 struct sun4ican_priv *priv;
780 clk = of_clk_get(np, 0);
782 dev_err(&pdev->dev, "unable to request clock\n");
787 irq = platform_get_irq(pdev, 0);
789 dev_err(&pdev->dev, "could not get a valid irq\n");
794 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
795 addr = devm_ioremap_resource(&pdev->dev, mem);
801 dev = alloc_candev(sizeof(struct sun4ican_priv), 1);
804 "could not allocate memory for CAN device\n");
809 dev->netdev_ops = &sun4ican_netdev_ops;
811 dev->flags |= IFF_ECHO;
813 priv = netdev_priv(dev);
814 priv->can.clock.freq = clk_get_rate(clk);
815 priv->can.bittiming_const = &sun4ican_bittiming_const;
816 priv->can.do_set_mode = sun4ican_set_mode;
817 priv->can.do_get_berr_counter = sun4ican_get_berr_counter;
818 priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING |
819 CAN_CTRLMODE_LISTENONLY |
820 CAN_CTRLMODE_LOOPBACK |
821 CAN_CTRLMODE_3_SAMPLES;
824 spin_lock_init(&priv->cmdreg_lock);
826 platform_set_drvdata(pdev, dev);
827 SET_NETDEV_DEV(dev, &pdev->dev);
829 err = register_candev(dev);
831 dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
835 devm_can_led_init(dev);
837 dev_info(&pdev->dev, "device registered (base=%p, irq=%d)\n",
838 priv->base, dev->irq);
848 static struct platform_driver sun4i_can_driver = {
851 .of_match_table = sun4ican_of_match,
853 .probe = sun4ican_probe,
854 .remove = sun4ican_remove,
857 module_platform_driver(sun4i_can_driver);
859 MODULE_AUTHOR("Peter Chen <xingkongcp@gmail.com>");
860 MODULE_AUTHOR("Gerhard Bertelsmann <info@gerhard-bertelsmann.de>");
861 MODULE_LICENSE("Dual BSD/GPL");
862 MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20)");