2 * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
4 * Header file for Host Controller registers and I/O accessors.
6 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or (at
11 * your option) any later version.
16 #include <linux/scatterlist.h>
17 #include <linux/compiler.h>
18 #include <linux/types.h>
20 #include <linux/leds.h>
21 #include <linux/interrupt.h>
23 #include <linux/mmc/host.h>
26 * Controller registers
29 #define SDHCI_DMA_ADDRESS 0x00
30 #define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
32 #define SDHCI_BLOCK_SIZE 0x04
33 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
35 #define SDHCI_BLOCK_COUNT 0x06
37 #define SDHCI_ARGUMENT 0x08
39 #define SDHCI_TRANSFER_MODE 0x0C
40 #define SDHCI_TRNS_DMA 0x01
41 #define SDHCI_TRNS_BLK_CNT_EN 0x02
42 #define SDHCI_TRNS_AUTO_CMD12 0x04
43 #define SDHCI_TRNS_AUTO_CMD23 0x08
44 #define SDHCI_TRNS_READ 0x10
45 #define SDHCI_TRNS_MULTI 0x20
47 #define SDHCI_COMMAND 0x0E
48 #define SDHCI_CMD_RESP_MASK 0x03
49 #define SDHCI_CMD_CRC 0x08
50 #define SDHCI_CMD_INDEX 0x10
51 #define SDHCI_CMD_DATA 0x20
52 #define SDHCI_CMD_ABORTCMD 0xC0
54 #define SDHCI_CMD_RESP_NONE 0x00
55 #define SDHCI_CMD_RESP_LONG 0x01
56 #define SDHCI_CMD_RESP_SHORT 0x02
57 #define SDHCI_CMD_RESP_SHORT_BUSY 0x03
59 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
60 #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
62 #define SDHCI_RESPONSE 0x10
64 #define SDHCI_BUFFER 0x20
66 #define SDHCI_PRESENT_STATE 0x24
67 #define SDHCI_CMD_INHIBIT 0x00000001
68 #define SDHCI_DATA_INHIBIT 0x00000002
69 #define SDHCI_DOING_WRITE 0x00000100
70 #define SDHCI_DOING_READ 0x00000200
71 #define SDHCI_SPACE_AVAILABLE 0x00000400
72 #define SDHCI_DATA_AVAILABLE 0x00000800
73 #define SDHCI_CARD_PRESENT 0x00010000
74 #define SDHCI_WRITE_PROTECT 0x00080000
75 #define SDHCI_DATA_LVL_MASK 0x00F00000
76 #define SDHCI_DATA_LVL_SHIFT 20
77 #define SDHCI_DATA_0_LVL_MASK 0x00100000
78 #define SDHCI_CMD_LVL 0x01000000
80 #define SDHCI_HOST_CONTROL 0x28
81 #define SDHCI_CTRL_LED 0x01
82 #define SDHCI_CTRL_4BITBUS 0x02
83 #define SDHCI_CTRL_HISPD 0x04
84 #define SDHCI_CTRL_DMA_MASK 0x18
85 #define SDHCI_CTRL_SDMA 0x00
86 #define SDHCI_CTRL_ADMA1 0x08
87 #define SDHCI_CTRL_ADMA32 0x10
88 #define SDHCI_CTRL_ADMA64 0x18
89 #define SDHCI_CTRL_8BITBUS 0x20
90 #define SDHCI_CTRL_CDTEST_INS 0x40
91 #define SDHCI_CTRL_CDTEST_EN 0x80
93 #define SDHCI_POWER_CONTROL 0x29
94 #define SDHCI_POWER_ON 0x01
95 #define SDHCI_POWER_180 0x0A
96 #define SDHCI_POWER_300 0x0C
97 #define SDHCI_POWER_330 0x0E
99 #define SDHCI_BLOCK_GAP_CONTROL 0x2A
101 #define SDHCI_WAKE_UP_CONTROL 0x2B
102 #define SDHCI_WAKE_ON_INT 0x01
103 #define SDHCI_WAKE_ON_INSERT 0x02
104 #define SDHCI_WAKE_ON_REMOVE 0x04
106 #define SDHCI_CLOCK_CONTROL 0x2C
107 #define SDHCI_DIVIDER_SHIFT 8
108 #define SDHCI_DIVIDER_HI_SHIFT 6
109 #define SDHCI_DIV_MASK 0xFF
110 #define SDHCI_DIV_MASK_LEN 8
111 #define SDHCI_DIV_HI_MASK 0x300
112 #define SDHCI_PROG_CLOCK_MODE 0x0020
113 #define SDHCI_CLOCK_CARD_EN 0x0004
114 #define SDHCI_CLOCK_INT_STABLE 0x0002
115 #define SDHCI_CLOCK_INT_EN 0x0001
117 #define SDHCI_TIMEOUT_CONTROL 0x2E
119 #define SDHCI_SOFTWARE_RESET 0x2F
120 #define SDHCI_RESET_ALL 0x01
121 #define SDHCI_RESET_CMD 0x02
122 #define SDHCI_RESET_DATA 0x04
124 #define SDHCI_INT_STATUS 0x30
125 #define SDHCI_INT_ENABLE 0x34
126 #define SDHCI_SIGNAL_ENABLE 0x38
127 #define SDHCI_INT_RESPONSE 0x00000001
128 #define SDHCI_INT_DATA_END 0x00000002
129 #define SDHCI_INT_BLK_GAP 0x00000004
130 #define SDHCI_INT_DMA_END 0x00000008
131 #define SDHCI_INT_SPACE_AVAIL 0x00000010
132 #define SDHCI_INT_DATA_AVAIL 0x00000020
133 #define SDHCI_INT_CARD_INSERT 0x00000040
134 #define SDHCI_INT_CARD_REMOVE 0x00000080
135 #define SDHCI_INT_CARD_INT 0x00000100
136 #define SDHCI_INT_RETUNE 0x00001000
137 #define SDHCI_INT_CQE 0x00004000
138 #define SDHCI_INT_ERROR 0x00008000
139 #define SDHCI_INT_TIMEOUT 0x00010000
140 #define SDHCI_INT_CRC 0x00020000
141 #define SDHCI_INT_END_BIT 0x00040000
142 #define SDHCI_INT_INDEX 0x00080000
143 #define SDHCI_INT_DATA_TIMEOUT 0x00100000
144 #define SDHCI_INT_DATA_CRC 0x00200000
145 #define SDHCI_INT_DATA_END_BIT 0x00400000
146 #define SDHCI_INT_BUS_POWER 0x00800000
147 #define SDHCI_INT_AUTO_CMD_ERR 0x01000000
148 #define SDHCI_INT_ADMA_ERROR 0x02000000
150 #define SDHCI_INT_NORMAL_MASK 0x00007FFF
151 #define SDHCI_INT_ERROR_MASK 0xFFFF8000
153 #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
154 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \
155 SDHCI_INT_AUTO_CMD_ERR)
156 #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
157 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
158 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
159 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
161 #define SDHCI_INT_ALL_MASK ((unsigned int)-1)
163 #define SDHCI_CQE_INT_ERR_MASK ( \
164 SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \
165 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \
166 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)
168 #define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE)
170 #define SDHCI_AUTO_CMD_STATUS 0x3C
171 #define SDHCI_AUTO_CMD_TIMEOUT 0x00000002
172 #define SDHCI_AUTO_CMD_CRC 0x00000004
173 #define SDHCI_AUTO_CMD_END_BIT 0x00000008
174 #define SDHCI_AUTO_CMD_INDEX 0x00000010
176 #define SDHCI_HOST_CONTROL2 0x3E
177 #define SDHCI_CTRL_UHS_MASK 0x0007
178 #define SDHCI_CTRL_UHS_SDR12 0x0000
179 #define SDHCI_CTRL_UHS_SDR25 0x0001
180 #define SDHCI_CTRL_UHS_SDR50 0x0002
181 #define SDHCI_CTRL_UHS_SDR104 0x0003
182 #define SDHCI_CTRL_UHS_DDR50 0x0004
183 #define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
184 #define SDHCI_CTRL_VDD_180 0x0008
185 #define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
186 #define SDHCI_CTRL_DRV_TYPE_B 0x0000
187 #define SDHCI_CTRL_DRV_TYPE_A 0x0010
188 #define SDHCI_CTRL_DRV_TYPE_C 0x0020
189 #define SDHCI_CTRL_DRV_TYPE_D 0x0030
190 #define SDHCI_CTRL_EXEC_TUNING 0x0040
191 #define SDHCI_CTRL_TUNED_CLK 0x0080
192 #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
194 #define SDHCI_CAPABILITIES 0x40
195 #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
196 #define SDHCI_TIMEOUT_CLK_SHIFT 0
197 #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
198 #define SDHCI_CLOCK_BASE_MASK 0x00003F00
199 #define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
200 #define SDHCI_CLOCK_BASE_SHIFT 8
201 #define SDHCI_MAX_BLOCK_MASK 0x00030000
202 #define SDHCI_MAX_BLOCK_SHIFT 16
203 #define SDHCI_CAN_DO_8BIT 0x00040000
204 #define SDHCI_CAN_DO_ADMA2 0x00080000
205 #define SDHCI_CAN_DO_ADMA1 0x00100000
206 #define SDHCI_CAN_DO_HISPD 0x00200000
207 #define SDHCI_CAN_DO_SDMA 0x00400000
208 #define SDHCI_CAN_DO_SUSPEND 0x00800000
209 #define SDHCI_CAN_VDD_330 0x01000000
210 #define SDHCI_CAN_VDD_300 0x02000000
211 #define SDHCI_CAN_VDD_180 0x04000000
212 #define SDHCI_CAN_64BIT 0x10000000
214 #define SDHCI_SUPPORT_SDR50 0x00000001
215 #define SDHCI_SUPPORT_SDR104 0x00000002
216 #define SDHCI_SUPPORT_DDR50 0x00000004
217 #define SDHCI_DRIVER_TYPE_A 0x00000010
218 #define SDHCI_DRIVER_TYPE_C 0x00000020
219 #define SDHCI_DRIVER_TYPE_D 0x00000040
220 #define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00
221 #define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8
222 #define SDHCI_USE_SDR50_TUNING 0x00002000
223 #define SDHCI_RETUNING_MODE_MASK 0x0000C000
224 #define SDHCI_RETUNING_MODE_SHIFT 14
225 #define SDHCI_CLOCK_MUL_MASK 0x00FF0000
226 #define SDHCI_CLOCK_MUL_SHIFT 16
227 #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
229 #define SDHCI_CAPABILITIES_1 0x44
231 #define SDHCI_MAX_CURRENT 0x48
232 #define SDHCI_MAX_CURRENT_LIMIT 0xFF
233 #define SDHCI_MAX_CURRENT_330_MASK 0x0000FF
234 #define SDHCI_MAX_CURRENT_330_SHIFT 0
235 #define SDHCI_MAX_CURRENT_300_MASK 0x00FF00
236 #define SDHCI_MAX_CURRENT_300_SHIFT 8
237 #define SDHCI_MAX_CURRENT_180_MASK 0xFF0000
238 #define SDHCI_MAX_CURRENT_180_SHIFT 16
239 #define SDHCI_MAX_CURRENT_MULTIPLIER 4
241 /* 4C-4F reserved for more max current */
243 #define SDHCI_SET_ACMD12_ERROR 0x50
244 #define SDHCI_SET_INT_ERROR 0x52
246 #define SDHCI_ADMA_ERROR 0x54
250 #define SDHCI_ADMA_ADDRESS 0x58
251 #define SDHCI_ADMA_ADDRESS_HI 0x5C
255 #define SDHCI_PRESET_FOR_HIGH_SPEED 0x64
256 #define SDHCI_PRESET_FOR_SDR12 0x66
257 #define SDHCI_PRESET_FOR_SDR25 0x68
258 #define SDHCI_PRESET_FOR_SDR50 0x6A
259 #define SDHCI_PRESET_FOR_SDR104 0x6C
260 #define SDHCI_PRESET_FOR_DDR50 0x6E
261 #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
262 #define SDHCI_PRESET_DRV_MASK 0xC000
263 #define SDHCI_PRESET_DRV_SHIFT 14
264 #define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
265 #define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10
266 #define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF
267 #define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0
269 #define SDHCI_SLOT_INT_STATUS 0xFC
271 #define SDHCI_HOST_VERSION 0xFE
272 #define SDHCI_VENDOR_VER_MASK 0xFF00
273 #define SDHCI_VENDOR_VER_SHIFT 8
274 #define SDHCI_SPEC_VER_MASK 0x00FF
275 #define SDHCI_SPEC_VER_SHIFT 0
276 #define SDHCI_SPEC_100 0
277 #define SDHCI_SPEC_200 1
278 #define SDHCI_SPEC_300 2
281 * End of controller registers.
284 #define SDHCI_MAX_DIV_SPEC_200 256
285 #define SDHCI_MAX_DIV_SPEC_300 2046
288 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
290 #define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
291 #define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
293 /* ADMA2 32-bit DMA descriptor size */
294 #define SDHCI_ADMA2_32_DESC_SZ 8
296 /* ADMA2 32-bit descriptor */
297 struct sdhci_adma2_32_desc {
301 } __packed __aligned(4);
303 /* ADMA2 data alignment */
304 #define SDHCI_ADMA2_ALIGN 4
305 #define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1)
308 * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte
309 * alignment for the descriptor table even in 32-bit DMA mode. Memory
310 * allocation is at least 8 byte aligned anyway, so just stipulate 8 always.
312 #define SDHCI_ADMA2_DESC_ALIGN 8
314 /* ADMA2 64-bit DMA descriptor size */
315 #define SDHCI_ADMA2_64_DESC_SZ 12
318 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
321 struct sdhci_adma2_64_desc {
326 } __packed __aligned(4);
328 #define ADMA2_TRAN_VALID 0x21
329 #define ADMA2_NOP_END_VALID 0x3
330 #define ADMA2_END 0x2
333 * Maximum segments assuming a 512KiB maximum requisition size and a minimum
336 #define SDHCI_MAX_SEGS 128
338 /* Allow for a a command request and a data request at the same time */
339 #define SDHCI_MAX_MRQS 2
343 COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */
344 COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */
348 /* Data set by hardware interface driver */
349 const char *hw_name; /* Hardware bus name */
351 unsigned int quirks; /* Deviations from spec. */
353 /* Controller doesn't honor resets unless we touch the clock register */
354 #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
355 /* Controller has bad caps bits, but really supports DMA */
356 #define SDHCI_QUIRK_FORCE_DMA (1<<1)
357 /* Controller doesn't like to be reset when there is no card inserted. */
358 #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
359 /* Controller doesn't like clearing the power reg before a change */
360 #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
361 /* Controller has flaky internal state so reset it on each ios change */
362 #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
363 /* Controller has an unusable DMA engine */
364 #define SDHCI_QUIRK_BROKEN_DMA (1<<5)
365 /* Controller has an unusable ADMA engine */
366 #define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
367 /* Controller can only DMA from 32-bit aligned addresses */
368 #define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
369 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */
370 #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
371 /* Controller can only ADMA chunks that are a multiple of 32 bits */
372 #define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
373 /* Controller needs to be reset after each request to stay stable */
374 #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
375 /* Controller needs voltage and power writes to happen separately */
376 #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
377 /* Controller provides an incorrect timeout value for transfers */
378 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
379 /* Controller has an issue with buffer bits for small transfers */
380 #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
381 /* Controller does not provide transfer-complete interrupt when not busy */
382 #define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
383 /* Controller has unreliable card detection */
384 #define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
385 /* Controller reports inverted write-protect state */
386 #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
387 /* Controller does not like fast PIO transfers */
388 #define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
389 /* Controller has to be forced to use block size of 2048 bytes */
390 #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
391 /* Controller cannot do multi-block transfers */
392 #define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
393 /* Controller can only handle 1-bit data transfers */
394 #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
395 /* Controller needs 10ms delay between applying power and clock */
396 #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
397 /* Controller uses SDCLK instead of TMCLK for data timeouts */
398 #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
399 /* Controller reports wrong base clock capability */
400 #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
401 /* Controller cannot support End Attribute in NOP ADMA descriptor */
402 #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
403 /* Controller is missing device caps. Use caps provided by host */
404 #define SDHCI_QUIRK_MISSING_CAPS (1<<27)
405 /* Controller uses Auto CMD12 command to stop the transfer */
406 #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
407 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */
408 #define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
409 /* Controller treats ADMA descriptors with length 0000h incorrectly */
410 #define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30)
411 /* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
412 #define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31)
414 unsigned int quirks2; /* More deviations from spec. */
416 #define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0)
417 #define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1)
418 /* The system physically doesn't support 1.8v, even if the host does */
419 #define SDHCI_QUIRK2_NO_1_8_V (1<<2)
420 #define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
421 #define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4)
422 /* Controller has a non-standard host control register */
423 #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5)
424 /* Controller does not support HS200 */
425 #define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
426 /* Controller does not support DDR50 */
427 #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
428 /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
429 #define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
430 /* Controller does not support 64-bit DMA */
431 #define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9)
432 /* need clear transfer mode register before send cmd */
433 #define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10)
434 /* Capability register bit-63 indicates HS400 support */
435 #define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11)
436 /* forced tuned clock */
437 #define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12)
438 /* disable the block count for single block transactions */
439 #define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13)
440 /* Controller broken with using ACMD23 */
441 #define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
442 /* Broken Clock divider zero in controller */
443 #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
444 /* Controller has CRC in 136 bit Command Response */
445 #define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16)
447 int irq; /* Device IRQ */
448 void __iomem *ioaddr; /* Mapped address */
449 char *bounce_buffer; /* For packing SDMA reads/writes */
450 dma_addr_t bounce_addr;
451 unsigned int bounce_buffer_size;
453 const struct sdhci_ops *ops; /* Low level hw interface */
456 struct mmc_host *mmc; /* MMC structure */
457 struct mmc_host_ops mmc_host_ops; /* MMC host ops */
458 u64 dma_mask; /* custom DMA mask */
460 #if IS_ENABLED(CONFIG_LEDS_CLASS)
461 struct led_classdev led; /* LED control */
465 spinlock_t lock; /* Mutex */
467 int flags; /* Host attributes */
468 #define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
469 #define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
470 #define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
471 #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
472 #define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */
473 #define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
474 #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
475 #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
476 #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
477 #define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
478 #define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */
479 #define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */
480 #define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */
481 #define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */
483 unsigned int version; /* SDHCI spec. version */
485 unsigned int max_clk; /* Max possible freq (MHz) */
486 unsigned int timeout_clk; /* Timeout freq (KHz) */
487 unsigned int clk_mul; /* Clock Muliplier value */
489 unsigned int clock; /* Current clock (MHz) */
490 u8 pwr; /* Current voltage */
492 bool runtime_suspended; /* Host is runtime suspended */
493 bool bus_on; /* Bus power prevents runtime suspend */
494 bool preset_enabled; /* Preset is enabled */
495 bool pending_reset; /* Cmd/data reset is pending */
497 struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */
498 struct mmc_command *cmd; /* Current command */
499 struct mmc_command *data_cmd; /* Current data command */
500 struct mmc_data *data; /* Current data request */
501 unsigned int data_early:1; /* Data finished before cmd */
503 struct sg_mapping_iter sg_miter; /* SG state for PIO */
504 unsigned int blocks; /* remaining PIO blocks */
506 int sg_count; /* Mapped sg entries */
508 void *adma_table; /* ADMA descriptor table */
509 void *align_buffer; /* Bounce buffer */
511 size_t adma_table_sz; /* ADMA descriptor table size */
512 size_t align_buffer_sz; /* Bounce buffer size */
514 dma_addr_t adma_addr; /* Mapped ADMA descr. table */
515 dma_addr_t align_addr; /* Mapped bounce buffer */
517 unsigned int desc_sz; /* ADMA descriptor size */
519 struct tasklet_struct finish_tasklet; /* Tasklet structures */
521 struct timer_list timer; /* Timer for timeouts */
522 struct timer_list data_timer; /* Timer for data timeouts */
524 u32 caps; /* CAPABILITY_0 */
525 u32 caps1; /* CAPABILITY_1 */
526 bool read_caps; /* Capability flags have been read */
528 unsigned int ocr_avail_sdio; /* OCR bit masks */
529 unsigned int ocr_avail_sd;
530 unsigned int ocr_avail_mmc;
531 u32 ocr_mask; /* available voltages */
533 unsigned timing; /* Current timing */
537 /* cached registers */
540 bool cqe_on; /* CQE is operating */
541 u32 cqe_ier; /* CQE interrupt mask */
542 u32 cqe_err_ier; /* CQE error interrupt mask */
544 wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */
545 unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */
547 unsigned int tuning_count; /* Timer count for re-tuning */
548 unsigned int tuning_mode; /* Re-tuning mode supported by host */
549 #define SDHCI_TUNING_MODE_1 0
550 #define SDHCI_TUNING_MODE_2 1
551 #define SDHCI_TUNING_MODE_3 2
552 /* Delay (ms) between tuning commands */
555 /* Host SDMA buffer boundary. */
558 unsigned long private[0] ____cacheline_aligned;
562 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
563 u32 (*read_l)(struct sdhci_host *host, int reg);
564 u16 (*read_w)(struct sdhci_host *host, int reg);
565 u8 (*read_b)(struct sdhci_host *host, int reg);
566 void (*write_l)(struct sdhci_host *host, u32 val, int reg);
567 void (*write_w)(struct sdhci_host *host, u16 val, int reg);
568 void (*write_b)(struct sdhci_host *host, u8 val, int reg);
571 void (*set_clock)(struct sdhci_host *host, unsigned int clock);
572 void (*set_power)(struct sdhci_host *host, unsigned char mode,
575 u32 (*irq)(struct sdhci_host *host, u32 intmask);
577 int (*enable_dma)(struct sdhci_host *host);
578 unsigned int (*get_max_clock)(struct sdhci_host *host);
579 unsigned int (*get_min_clock)(struct sdhci_host *host);
580 /* get_timeout_clock should return clk rate in unit of Hz */
581 unsigned int (*get_timeout_clock)(struct sdhci_host *host);
582 unsigned int (*get_max_timeout_count)(struct sdhci_host *host);
583 void (*set_timeout)(struct sdhci_host *host,
584 struct mmc_command *cmd);
585 void (*set_bus_width)(struct sdhci_host *host, int width);
586 void (*platform_send_init_74_clocks)(struct sdhci_host *host,
588 unsigned int (*get_ro)(struct sdhci_host *host);
589 void (*reset)(struct sdhci_host *host, u8 mask);
590 int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
591 void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
592 void (*hw_reset)(struct sdhci_host *host);
593 void (*adma_workaround)(struct sdhci_host *host, u32 intmask);
594 void (*card_event)(struct sdhci_host *host);
595 void (*voltage_switch)(struct sdhci_host *host);
598 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
600 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
602 if (unlikely(host->ops->write_l))
603 host->ops->write_l(host, val, reg);
605 writel(val, host->ioaddr + reg);
608 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
610 if (unlikely(host->ops->write_w))
611 host->ops->write_w(host, val, reg);
613 writew(val, host->ioaddr + reg);
616 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
618 if (unlikely(host->ops->write_b))
619 host->ops->write_b(host, val, reg);
621 writeb(val, host->ioaddr + reg);
624 static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
626 if (unlikely(host->ops->read_l))
627 return host->ops->read_l(host, reg);
629 return readl(host->ioaddr + reg);
632 static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
634 if (unlikely(host->ops->read_w))
635 return host->ops->read_w(host, reg);
637 return readw(host->ioaddr + reg);
640 static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
642 if (unlikely(host->ops->read_b))
643 return host->ops->read_b(host, reg);
645 return readb(host->ioaddr + reg);
650 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
652 writel(val, host->ioaddr + reg);
655 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
657 writew(val, host->ioaddr + reg);
660 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
662 writeb(val, host->ioaddr + reg);
665 static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
667 return readl(host->ioaddr + reg);
670 static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
672 return readw(host->ioaddr + reg);
675 static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
677 return readb(host->ioaddr + reg);
680 #endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
682 struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size);
683 void sdhci_free_host(struct sdhci_host *host);
685 static inline void *sdhci_priv(struct sdhci_host *host)
687 return host->private;
690 void sdhci_card_detect(struct sdhci_host *host);
691 void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps,
693 int sdhci_setup_host(struct sdhci_host *host);
694 void sdhci_cleanup_host(struct sdhci_host *host);
695 int __sdhci_add_host(struct sdhci_host *host);
696 int sdhci_add_host(struct sdhci_host *host);
697 void sdhci_remove_host(struct sdhci_host *host, int dead);
698 void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
700 static inline void sdhci_read_caps(struct sdhci_host *host)
702 __sdhci_read_caps(host, NULL, NULL, NULL);
705 static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host)
707 return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED);
710 u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
711 unsigned int *actual_clock);
712 void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
713 void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
714 void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
716 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
718 void sdhci_set_bus_width(struct sdhci_host *host, int width);
719 void sdhci_reset(struct sdhci_host *host, u8 mask);
720 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
721 int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
722 void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
723 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
724 struct mmc_ios *ios);
725 void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);
728 int sdhci_suspend_host(struct sdhci_host *host);
729 int sdhci_resume_host(struct sdhci_host *host);
730 void sdhci_enable_irq_wakeups(struct sdhci_host *host);
731 int sdhci_runtime_suspend_host(struct sdhci_host *host);
732 int sdhci_runtime_resume_host(struct sdhci_host *host);
735 void sdhci_cqe_enable(struct mmc_host *mmc);
736 void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery);
737 bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
740 void sdhci_dumpregs(struct sdhci_host *host);
742 #endif /* __SDHCI_HW_H */