2 * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver.
3 * Chip is combined proximity and ambient light sensor.
5 * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
7 * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
25 #include <linux/kernel.h>
26 #include <linux/module.h>
27 #include <linux/i2c.h>
28 #include <linux/interrupt.h>
29 #include <linux/mutex.h>
30 #include <linux/i2c/bh1770glc.h>
31 #include <linux/regulator/consumer.h>
32 #include <linux/pm_runtime.h>
33 #include <linux/workqueue.h>
34 #include <linux/delay.h>
35 #include <linux/wait.h>
36 #include <linux/slab.h>
38 #define BH1770_ALS_CONTROL 0x80 /* ALS operation mode control */
39 #define BH1770_PS_CONTROL 0x81 /* PS operation mode control */
40 #define BH1770_I_LED 0x82 /* active LED and LED1, LED2 current */
41 #define BH1770_I_LED3 0x83 /* LED3 current setting */
42 #define BH1770_ALS_PS_MEAS 0x84 /* Forced mode trigger */
43 #define BH1770_PS_MEAS_RATE 0x85 /* PS meas. rate at stand alone mode */
44 #define BH1770_ALS_MEAS_RATE 0x86 /* ALS meas. rate at stand alone mode */
45 #define BH1770_PART_ID 0x8a /* Part number and revision ID */
46 #define BH1770_MANUFACT_ID 0x8b /* Manufacturerer ID */
47 #define BH1770_ALS_DATA_0 0x8c /* ALS DATA low byte */
48 #define BH1770_ALS_DATA_1 0x8d /* ALS DATA high byte */
49 #define BH1770_ALS_PS_STATUS 0x8e /* Measurement data and int status */
50 #define BH1770_PS_DATA_LED1 0x8f /* PS data from LED1 */
51 #define BH1770_PS_DATA_LED2 0x90 /* PS data from LED2 */
52 #define BH1770_PS_DATA_LED3 0x91 /* PS data from LED3 */
53 #define BH1770_INTERRUPT 0x92 /* Interrupt setting */
54 #define BH1770_PS_TH_LED1 0x93 /* PS interrupt threshold for LED1 */
55 #define BH1770_PS_TH_LED2 0x94 /* PS interrupt threshold for LED2 */
56 #define BH1770_PS_TH_LED3 0x95 /* PS interrupt threshold for LED3 */
57 #define BH1770_ALS_TH_UP_0 0x96 /* ALS upper threshold low byte */
58 #define BH1770_ALS_TH_UP_1 0x97 /* ALS upper threshold high byte */
59 #define BH1770_ALS_TH_LOW_0 0x98 /* ALS lower threshold low byte */
60 #define BH1770_ALS_TH_LOW_1 0x99 /* ALS lower threshold high byte */
63 #define BH1770_MANUFACT_ROHM 0x01
64 #define BH1770_MANUFACT_OSRAM 0x03
67 #define BH1770_PART 0x90
68 #define BH1770_PART_MASK 0xf0
69 #define BH1770_REV_MASK 0x0f
70 #define BH1770_REV_SHIFT 0
71 #define BH1770_REV_0 0x00
72 #define BH1770_REV_1 0x01
74 /* Operating modes for both */
75 #define BH1770_STANDBY 0x00
76 #define BH1770_FORCED 0x02
77 #define BH1770_STANDALONE 0x03
78 #define BH1770_SWRESET (0x01 << 2)
80 #define BH1770_PS_TRIG_MEAS (1 << 0)
81 #define BH1770_ALS_TRIG_MEAS (1 << 1)
83 /* Interrupt control */
84 #define BH1770_INT_OUTPUT_MODE (1 << 3) /* 0 = latched */
85 #define BH1770_INT_POLARITY (1 << 2) /* 1 = active high */
86 #define BH1770_INT_ALS_ENA (1 << 1)
87 #define BH1770_INT_PS_ENA (1 << 0)
89 /* Interrupt status */
90 #define BH1770_INT_LED1_DATA (1 << 0)
91 #define BH1770_INT_LED1_INT (1 << 1)
92 #define BH1770_INT_LED2_DATA (1 << 2)
93 #define BH1770_INT_LED2_INT (1 << 3)
94 #define BH1770_INT_LED3_DATA (1 << 4)
95 #define BH1770_INT_LED3_INT (1 << 5)
96 #define BH1770_INT_LEDS_INT ((1 << 1) | (1 << 3) | (1 << 5))
97 #define BH1770_INT_ALS_DATA (1 << 6)
98 #define BH1770_INT_ALS_INT (1 << 7)
101 #define BH1770_LED1 0x00
103 #define BH1770_DISABLE 0
104 #define BH1770_ENABLE 1
105 #define BH1770_PROX_CHANNELS 1
107 #define BH1770_LUX_DEFAULT_RATE 1 /* Index to lux rate table */
108 #define BH1770_PROX_DEFAULT_RATE 1 /* Direct HW value =~ 50Hz */
109 #define BH1770_PROX_DEF_RATE_THRESH 6 /* Direct HW value =~ 5 Hz */
110 #define BH1770_STARTUP_DELAY 50
111 #define BH1770_RESET_TIME 10
112 #define BH1770_TIMEOUT 2100 /* Timeout in 2.1 seconds */
114 #define BH1770_LUX_RANGE 65535
115 #define BH1770_PROX_RANGE 255
116 #define BH1770_COEF_SCALER 1024
117 #define BH1770_CALIB_SCALER 8192
118 #define BH1770_LUX_NEUTRAL_CALIB_VALUE (1 * BH1770_CALIB_SCALER)
119 #define BH1770_LUX_DEF_THRES 1000
120 #define BH1770_PROX_DEF_THRES 70
121 #define BH1770_PROX_DEF_ABS_THRES 100
122 #define BH1770_DEFAULT_PERSISTENCE 10
123 #define BH1770_PROX_MAX_PERSISTENCE 50
124 #define BH1770_LUX_GA_SCALE 16384
125 #define BH1770_LUX_CF_SCALE 2048 /* CF ChipFactor */
126 #define BH1770_NEUTRAL_CF BH1770_LUX_CF_SCALE
127 #define BH1770_LUX_CORR_SCALE 4096
129 #define PROX_ABOVE_THRESHOLD 1
130 #define PROX_BELOW_THRESHOLD 0
132 #define PROX_IGNORE_LUX_LIMIT 500
135 struct bh1770_platform_data *pdata;
138 struct i2c_client *client;
139 struct regulator_bulk_data regs[2];
140 struct mutex mutex; /* avoid parallel access */
141 wait_queue_head_t wait;
145 struct delayed_work prox_work;
146 u32 lux_cf; /* Chip specific factor */
152 u16 lux_threshold_hi;
153 u16 lux_threshold_lo;
154 u16 lux_thres_hi_onchip;
155 u16 lux_thres_lo_onchip;
156 bool lux_wait_result;
158 int prox_enable_count;
162 int prox_rate_threshold;
164 u8 prox_persistence_counter;
167 u8 prox_threshold_hw;
168 bool prox_force_update;
173 static const char reg_vcc[] = "Vcc";
174 static const char reg_vleds[] = "Vleds";
177 * Supported stand alone rates in ms from chip data sheet
178 * {10, 20, 30, 40, 70, 100, 200, 500, 1000, 2000};
180 static const s16 prox_rates_hz[] = {100, 50, 33, 25, 14, 10, 5, 2};
181 static const s16 prox_rates_ms[] = {10, 20, 30, 40, 70, 100, 200, 500};
183 /* Supported IR-led currents in mA */
184 static const u8 prox_curr_ma[] = {5, 10, 20, 50, 100, 150, 200};
187 * Supported stand alone rates in ms from chip data sheet
188 * {100, 200, 500, 1000, 2000};
190 static const s16 lux_rates_hz[] = {10, 5, 2, 1, 0};
193 * interrupt control functions are called while keeping chip->mutex
194 * excluding module probe / remove
196 static inline int bh1770_lux_interrupt_control(struct bh1770_chip *chip,
199 chip->int_mode_lux = lux;
200 /* Set interrupt modes, interrupt active low, latched */
201 return i2c_smbus_write_byte_data(chip->client,
203 (lux << 1) | chip->int_mode_prox);
206 static inline int bh1770_prox_interrupt_control(struct bh1770_chip *chip,
209 chip->int_mode_prox = ps;
210 return i2c_smbus_write_byte_data(chip->client,
212 (chip->int_mode_lux << 1) | (ps << 0));
215 /* chip->mutex is always kept here */
216 static int bh1770_lux_rate(struct bh1770_chip *chip, int rate_index)
218 /* sysfs may call this when the chip is powered off */
219 if (pm_runtime_suspended(&chip->client->dev))
222 /* Proper proximity response needs fastest lux rate (100ms) */
223 if (chip->prox_enable_count)
226 return i2c_smbus_write_byte_data(chip->client,
227 BH1770_ALS_MEAS_RATE,
231 static int bh1770_prox_rate(struct bh1770_chip *chip, int mode)
235 rate = (mode == PROX_ABOVE_THRESHOLD) ?
236 chip->prox_rate_threshold : chip->prox_rate;
238 return i2c_smbus_write_byte_data(chip->client,
243 /* InfraredLED is controlled by the chip during proximity scanning */
244 static inline int bh1770_led_cfg(struct bh1770_chip *chip)
246 /* LED cfg, current for leds 1 and 2 */
247 return i2c_smbus_write_byte_data(chip->client,
250 (BH1770_LED_5mA << 3) |
255 * Following two functions converts raw ps values from HW to normalized
256 * values. Purpose is to compensate differences between different sensor
257 * versions and variants so that result means about the same between
260 static inline u8 bh1770_psraw_to_adjusted(struct bh1770_chip *chip, u8 psraw)
263 adjusted = (u16)(((u32)(psraw + chip->prox_const) * chip->prox_coef) /
265 if (adjusted > BH1770_PROX_RANGE)
266 adjusted = BH1770_PROX_RANGE;
270 static inline u8 bh1770_psadjusted_to_raw(struct bh1770_chip *chip, u8 ps)
274 raw = (((u32)ps * BH1770_COEF_SCALER) / chip->prox_coef);
275 if (raw > chip->prox_const)
276 raw = raw - chip->prox_const;
283 * Following two functions converts raw lux values from HW to normalized
284 * values. Purpose is to compensate differences between different sensor
285 * versions and variants so that result means about the same between
286 * versions. Chip->mutex is kept when this is called.
288 static int bh1770_prox_set_threshold(struct bh1770_chip *chip)
292 /* sysfs may call this when the chip is powered off */
293 if (pm_runtime_suspended(&chip->client->dev))
296 tmp = bh1770_psadjusted_to_raw(chip, chip->prox_threshold);
297 chip->prox_threshold_hw = tmp;
299 return i2c_smbus_write_byte_data(chip->client, BH1770_PS_TH_LED1,
303 static inline u16 bh1770_lux_raw_to_adjusted(struct bh1770_chip *chip, u16 raw)
306 lux = ((u32)raw * chip->lux_corr) / BH1770_LUX_CORR_SCALE;
307 return min(lux, (u32)BH1770_LUX_RANGE);
310 static inline u16 bh1770_lux_adjusted_to_raw(struct bh1770_chip *chip,
313 return (u32)adjusted * BH1770_LUX_CORR_SCALE / chip->lux_corr;
316 /* chip->mutex is kept when this is called */
317 static int bh1770_lux_update_thresholds(struct bh1770_chip *chip,
318 u16 threshold_hi, u16 threshold_lo)
323 /* sysfs may call this when the chip is powered off */
324 if (pm_runtime_suspended(&chip->client->dev))
328 * Compensate threshold values with the correction factors if not
329 * set to minimum or maximum.
330 * Min & max values disables interrupts.
332 if (threshold_hi != BH1770_LUX_RANGE && threshold_hi != 0)
333 threshold_hi = bh1770_lux_adjusted_to_raw(chip, threshold_hi);
335 if (threshold_lo != BH1770_LUX_RANGE && threshold_lo != 0)
336 threshold_lo = bh1770_lux_adjusted_to_raw(chip, threshold_lo);
338 if (chip->lux_thres_hi_onchip == threshold_hi &&
339 chip->lux_thres_lo_onchip == threshold_lo)
342 chip->lux_thres_hi_onchip = threshold_hi;
343 chip->lux_thres_lo_onchip = threshold_lo;
345 data[0] = threshold_hi;
346 data[1] = threshold_hi >> 8;
347 data[2] = threshold_lo;
348 data[3] = threshold_lo >> 8;
350 ret = i2c_smbus_write_i2c_block_data(chip->client,
357 static int bh1770_lux_get_result(struct bh1770_chip *chip)
362 ret = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_DATA_0);
367 ret = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_DATA_1);
371 chip->lux_data_raw = data | ((ret & 0xff) << 8);
376 /* Calculate correction value which contains chip and device specific parts */
377 static u32 bh1770_get_corr_value(struct bh1770_chip *chip)
380 /* Impact of glass attenuation correction */
381 tmp = (BH1770_LUX_CORR_SCALE * chip->lux_ga) / BH1770_LUX_GA_SCALE;
382 /* Impact of chip factor correction */
383 tmp = (tmp * chip->lux_cf) / BH1770_LUX_CF_SCALE;
384 /* Impact of Device specific calibration correction */
385 tmp = (tmp * chip->lux_calib) / BH1770_CALIB_SCALER;
389 static int bh1770_lux_read_result(struct bh1770_chip *chip)
391 bh1770_lux_get_result(chip);
392 return bh1770_lux_raw_to_adjusted(chip, chip->lux_data_raw);
396 * Chip on / off functions are called while keeping mutex except probe
399 static int bh1770_chip_on(struct bh1770_chip *chip)
401 int ret = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
406 usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2);
409 i2c_smbus_write_byte_data(chip->client, BH1770_ALS_CONTROL,
411 usleep_range(BH1770_RESET_TIME, BH1770_RESET_TIME * 2);
414 * ALS is started always since proximity needs als results
415 * for realibility estimation.
416 * Let's assume dark until the first ALS measurement is ready.
418 chip->lux_data_raw = 0;
420 ret = i2c_smbus_write_byte_data(chip->client,
421 BH1770_ALS_CONTROL, BH1770_STANDALONE);
423 /* Assume reset defaults */
424 chip->lux_thres_hi_onchip = BH1770_LUX_RANGE;
425 chip->lux_thres_lo_onchip = 0;
430 static void bh1770_chip_off(struct bh1770_chip *chip)
432 i2c_smbus_write_byte_data(chip->client,
433 BH1770_INTERRUPT, BH1770_DISABLE);
434 i2c_smbus_write_byte_data(chip->client,
435 BH1770_ALS_CONTROL, BH1770_STANDBY);
436 i2c_smbus_write_byte_data(chip->client,
437 BH1770_PS_CONTROL, BH1770_STANDBY);
438 regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
441 /* chip->mutex is kept when this is called */
442 static int bh1770_prox_mode_control(struct bh1770_chip *chip)
444 if (chip->prox_enable_count) {
445 chip->prox_force_update = true; /* Force immediate update */
447 bh1770_lux_rate(chip, chip->lux_rate_index);
448 bh1770_prox_set_threshold(chip);
449 bh1770_led_cfg(chip);
450 bh1770_prox_rate(chip, PROX_BELOW_THRESHOLD);
451 bh1770_prox_interrupt_control(chip, BH1770_ENABLE);
452 i2c_smbus_write_byte_data(chip->client,
453 BH1770_PS_CONTROL, BH1770_STANDALONE);
456 bh1770_lux_rate(chip, chip->lux_rate_index);
457 bh1770_prox_interrupt_control(chip, BH1770_DISABLE);
458 i2c_smbus_write_byte_data(chip->client,
459 BH1770_PS_CONTROL, BH1770_STANDBY);
464 /* chip->mutex is kept when this is called */
465 static int bh1770_prox_read_result(struct bh1770_chip *chip)
471 ret = i2c_smbus_read_byte_data(chip->client, BH1770_PS_DATA_LED1);
475 if (ret > chip->prox_threshold_hw)
481 * when ALS levels goes above limit, proximity result may be
482 * false proximity. Thus ignore the result. With real proximity
483 * there is a shadow causing low als levels.
485 if (chip->lux_data_raw > PROX_IGNORE_LUX_LIMIT)
488 chip->prox_data = bh1770_psraw_to_adjusted(chip, ret);
490 /* Strong proximity level or force mode requires immediate response */
491 if (chip->prox_data >= chip->prox_abs_thres ||
492 chip->prox_force_update)
493 chip->prox_persistence_counter = chip->prox_persistence;
495 chip->prox_force_update = false;
497 /* Persistence filttering to reduce false proximity events */
499 if (chip->prox_persistence_counter < chip->prox_persistence) {
500 chip->prox_persistence_counter++;
503 mode = PROX_ABOVE_THRESHOLD;
507 chip->prox_persistence_counter = 0;
508 mode = PROX_BELOW_THRESHOLD;
513 /* Set proximity detection rate based on above or below value */
515 bh1770_prox_rate(chip, mode);
516 sysfs_notify(&chip->client->dev.kobj, NULL, "prox0_raw");
522 static int bh1770_detect(struct bh1770_chip *chip)
524 struct i2c_client *client = chip->client;
528 ret = i2c_smbus_read_byte_data(client, BH1770_MANUFACT_ID);
533 ret = i2c_smbus_read_byte_data(client, BH1770_PART_ID);
538 chip->revision = (part & BH1770_REV_MASK) >> BH1770_REV_SHIFT;
539 chip->prox_coef = BH1770_COEF_SCALER;
540 chip->prox_const = 0;
541 chip->lux_cf = BH1770_NEUTRAL_CF;
543 if ((manu == BH1770_MANUFACT_ROHM) &&
544 ((part & BH1770_PART_MASK) == BH1770_PART)) {
545 snprintf(chip->chipname, sizeof(chip->chipname), "BH1770GLC");
549 if ((manu == BH1770_MANUFACT_OSRAM) &&
550 ((part & BH1770_PART_MASK) == BH1770_PART)) {
551 snprintf(chip->chipname, sizeof(chip->chipname), "SFH7770");
552 /* Values selected by comparing different versions */
553 chip->prox_coef = 819; /* 0.8 * BH1770_COEF_SCALER */
554 chip->prox_const = 40;
560 dev_dbg(&client->dev, "BH1770 or SFH7770 not found\n");
566 * This work is re-scheduled at every proximity interrupt.
567 * If this work is running, it means that there hasn't been any
568 * proximity interrupt in time. Situation is handled as no-proximity.
569 * It would be nice to have low-threshold interrupt or interrupt
570 * when measurement and hi-threshold are both 0. But neither of those exists.
571 * This is a workaroud for missing HW feature.
574 static void bh1770_prox_work(struct work_struct *work)
576 struct bh1770_chip *chip =
577 container_of(work, struct bh1770_chip, prox_work.work);
579 mutex_lock(&chip->mutex);
580 bh1770_prox_read_result(chip);
581 mutex_unlock(&chip->mutex);
584 /* This is threaded irq handler */
585 static irqreturn_t bh1770_irq(int irq, void *data)
587 struct bh1770_chip *chip = data;
591 mutex_lock(&chip->mutex);
592 status = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_PS_STATUS);
594 /* Acknowledge interrupt by reading this register */
595 i2c_smbus_read_byte_data(chip->client, BH1770_INTERRUPT);
598 * Check if there is fresh data available for als.
599 * If this is the very first data, update thresholds after that.
601 if (status & BH1770_INT_ALS_DATA) {
602 bh1770_lux_get_result(chip);
603 if (unlikely(chip->lux_wait_result)) {
604 chip->lux_wait_result = false;
605 wake_up(&chip->wait);
606 bh1770_lux_update_thresholds(chip,
607 chip->lux_threshold_hi,
608 chip->lux_threshold_lo);
612 /* Disable interrupt logic to guarantee acknowledgement */
613 i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT,
614 (0 << 1) | (0 << 0));
616 if ((status & BH1770_INT_ALS_INT))
617 sysfs_notify(&chip->client->dev.kobj, NULL, "lux0_input");
619 if (chip->int_mode_prox && (status & BH1770_INT_LEDS_INT)) {
620 rate = prox_rates_ms[chip->prox_rate_threshold];
621 bh1770_prox_read_result(chip);
624 /* Re-enable interrupt logic */
625 i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT,
626 (chip->int_mode_lux << 1) |
627 (chip->int_mode_prox << 0));
628 mutex_unlock(&chip->mutex);
631 * Can't cancel work while keeping mutex since the work uses the
636 * Simulate missing no-proximity interrupt 50ms after the
637 * next expected interrupt time.
639 cancel_delayed_work_sync(&chip->prox_work);
640 schedule_delayed_work(&chip->prox_work,
641 msecs_to_jiffies(rate + 50));
646 static ssize_t bh1770_power_state_store(struct device *dev,
647 struct device_attribute *attr,
648 const char *buf, size_t count)
650 struct bh1770_chip *chip = dev_get_drvdata(dev);
654 ret = kstrtoul(buf, 0, &value);
658 mutex_lock(&chip->mutex);
660 pm_runtime_get_sync(dev);
662 ret = bh1770_lux_rate(chip, chip->lux_rate_index);
668 ret = bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
674 /* This causes interrupt after the next measurement cycle */
675 bh1770_lux_update_thresholds(chip, BH1770_LUX_DEF_THRES,
676 BH1770_LUX_DEF_THRES);
677 /* Inform that we are waiting for a result from ALS */
678 chip->lux_wait_result = true;
679 bh1770_prox_mode_control(chip);
680 } else if (!pm_runtime_suspended(dev)) {
685 mutex_unlock(&chip->mutex);
689 static ssize_t bh1770_power_state_show(struct device *dev,
690 struct device_attribute *attr, char *buf)
692 return sprintf(buf, "%d\n", !pm_runtime_suspended(dev));
695 static ssize_t bh1770_lux_result_show(struct device *dev,
696 struct device_attribute *attr, char *buf)
698 struct bh1770_chip *chip = dev_get_drvdata(dev);
702 if (pm_runtime_suspended(dev))
703 return -EIO; /* Chip is not enabled at all */
705 timeout = wait_event_interruptible_timeout(chip->wait,
706 !chip->lux_wait_result,
707 msecs_to_jiffies(BH1770_TIMEOUT));
711 mutex_lock(&chip->mutex);
712 ret = sprintf(buf, "%d\n", bh1770_lux_read_result(chip));
713 mutex_unlock(&chip->mutex);
718 static ssize_t bh1770_lux_range_show(struct device *dev,
719 struct device_attribute *attr, char *buf)
721 return sprintf(buf, "%d\n", BH1770_LUX_RANGE);
724 static ssize_t bh1770_prox_enable_store(struct device *dev,
725 struct device_attribute *attr,
726 const char *buf, size_t count)
728 struct bh1770_chip *chip = dev_get_drvdata(dev);
732 ret = kstrtoul(buf, 0, &value);
736 mutex_lock(&chip->mutex);
737 /* Assume no proximity. Sensor will tell real state soon */
738 if (!chip->prox_enable_count)
742 chip->prox_enable_count++;
743 else if (chip->prox_enable_count > 0)
744 chip->prox_enable_count--;
748 /* Run control only when chip is powered on */
749 if (!pm_runtime_suspended(dev))
750 bh1770_prox_mode_control(chip);
752 mutex_unlock(&chip->mutex);
756 static ssize_t bh1770_prox_enable_show(struct device *dev,
757 struct device_attribute *attr, char *buf)
759 struct bh1770_chip *chip = dev_get_drvdata(dev);
762 mutex_lock(&chip->mutex);
763 len = sprintf(buf, "%d\n", chip->prox_enable_count);
764 mutex_unlock(&chip->mutex);
768 static ssize_t bh1770_prox_result_show(struct device *dev,
769 struct device_attribute *attr, char *buf)
771 struct bh1770_chip *chip = dev_get_drvdata(dev);
774 mutex_lock(&chip->mutex);
775 if (chip->prox_enable_count && !pm_runtime_suspended(dev))
776 ret = sprintf(buf, "%d\n", chip->prox_data);
779 mutex_unlock(&chip->mutex);
783 static ssize_t bh1770_prox_range_show(struct device *dev,
784 struct device_attribute *attr, char *buf)
786 return sprintf(buf, "%d\n", BH1770_PROX_RANGE);
789 static ssize_t bh1770_get_prox_rate_avail(struct device *dev,
790 struct device_attribute *attr, char *buf)
794 for (i = 0; i < ARRAY_SIZE(prox_rates_hz); i++)
795 pos += sprintf(buf + pos, "%d ", prox_rates_hz[i]);
796 sprintf(buf + pos - 1, "\n");
800 static ssize_t bh1770_get_prox_rate_above(struct device *dev,
801 struct device_attribute *attr, char *buf)
803 struct bh1770_chip *chip = dev_get_drvdata(dev);
804 return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate_threshold]);
807 static ssize_t bh1770_get_prox_rate_below(struct device *dev,
808 struct device_attribute *attr, char *buf)
810 struct bh1770_chip *chip = dev_get_drvdata(dev);
811 return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate]);
814 static int bh1770_prox_rate_validate(int rate)
818 for (i = 0; i < ARRAY_SIZE(prox_rates_hz) - 1; i++)
819 if (rate >= prox_rates_hz[i])
824 static ssize_t bh1770_set_prox_rate_above(struct device *dev,
825 struct device_attribute *attr,
826 const char *buf, size_t count)
828 struct bh1770_chip *chip = dev_get_drvdata(dev);
832 ret = kstrtoul(buf, 0, &value);
836 mutex_lock(&chip->mutex);
837 chip->prox_rate_threshold = bh1770_prox_rate_validate(value);
838 mutex_unlock(&chip->mutex);
842 static ssize_t bh1770_set_prox_rate_below(struct device *dev,
843 struct device_attribute *attr,
844 const char *buf, size_t count)
846 struct bh1770_chip *chip = dev_get_drvdata(dev);
850 ret = kstrtoul(buf, 0, &value);
854 mutex_lock(&chip->mutex);
855 chip->prox_rate = bh1770_prox_rate_validate(value);
856 mutex_unlock(&chip->mutex);
860 static ssize_t bh1770_get_prox_thres(struct device *dev,
861 struct device_attribute *attr, char *buf)
863 struct bh1770_chip *chip = dev_get_drvdata(dev);
864 return sprintf(buf, "%d\n", chip->prox_threshold);
867 static ssize_t bh1770_set_prox_thres(struct device *dev,
868 struct device_attribute *attr,
869 const char *buf, size_t count)
871 struct bh1770_chip *chip = dev_get_drvdata(dev);
875 ret = kstrtoul(buf, 0, &value);
879 if (value > BH1770_PROX_RANGE)
882 mutex_lock(&chip->mutex);
883 chip->prox_threshold = value;
884 ret = bh1770_prox_set_threshold(chip);
885 mutex_unlock(&chip->mutex);
891 static ssize_t bh1770_prox_persistence_show(struct device *dev,
892 struct device_attribute *attr, char *buf)
894 struct bh1770_chip *chip = dev_get_drvdata(dev);
896 return sprintf(buf, "%u\n", chip->prox_persistence);
899 static ssize_t bh1770_prox_persistence_store(struct device *dev,
900 struct device_attribute *attr,
901 const char *buf, size_t len)
903 struct bh1770_chip *chip = dev_get_drvdata(dev);
907 ret = kstrtoul(buf, 0, &value);
911 if (value > BH1770_PROX_MAX_PERSISTENCE)
914 chip->prox_persistence = value;
919 static ssize_t bh1770_prox_abs_thres_show(struct device *dev,
920 struct device_attribute *attr, char *buf)
922 struct bh1770_chip *chip = dev_get_drvdata(dev);
923 return sprintf(buf, "%u\n", chip->prox_abs_thres);
926 static ssize_t bh1770_prox_abs_thres_store(struct device *dev,
927 struct device_attribute *attr,
928 const char *buf, size_t len)
930 struct bh1770_chip *chip = dev_get_drvdata(dev);
934 ret = kstrtoul(buf, 0, &value);
938 if (value > BH1770_PROX_RANGE)
941 chip->prox_abs_thres = value;
946 static ssize_t bh1770_chip_id_show(struct device *dev,
947 struct device_attribute *attr, char *buf)
949 struct bh1770_chip *chip = dev_get_drvdata(dev);
950 return sprintf(buf, "%s rev %d\n", chip->chipname, chip->revision);
953 static ssize_t bh1770_lux_calib_default_show(struct device *dev,
954 struct device_attribute *attr, char *buf)
956 return sprintf(buf, "%u\n", BH1770_CALIB_SCALER);
959 static ssize_t bh1770_lux_calib_show(struct device *dev,
960 struct device_attribute *attr, char *buf)
962 struct bh1770_chip *chip = dev_get_drvdata(dev);
965 mutex_lock(&chip->mutex);
966 len = sprintf(buf, "%u\n", chip->lux_calib);
967 mutex_unlock(&chip->mutex);
971 static ssize_t bh1770_lux_calib_store(struct device *dev,
972 struct device_attribute *attr,
973 const char *buf, size_t len)
975 struct bh1770_chip *chip = dev_get_drvdata(dev);
981 ret = kstrtoul(buf, 0, &value);
985 mutex_lock(&chip->mutex);
986 old_calib = chip->lux_calib;
987 chip->lux_calib = value;
988 new_corr = bh1770_get_corr_value(chip);
990 chip->lux_calib = old_calib;
991 mutex_unlock(&chip->mutex);
994 chip->lux_corr = new_corr;
995 /* Refresh thresholds on HW after changing correction value */
996 bh1770_lux_update_thresholds(chip, chip->lux_threshold_hi,
997 chip->lux_threshold_lo);
999 mutex_unlock(&chip->mutex);
1004 static ssize_t bh1770_get_lux_rate_avail(struct device *dev,
1005 struct device_attribute *attr, char *buf)
1009 for (i = 0; i < ARRAY_SIZE(lux_rates_hz); i++)
1010 pos += sprintf(buf + pos, "%d ", lux_rates_hz[i]);
1011 sprintf(buf + pos - 1, "\n");
1015 static ssize_t bh1770_get_lux_rate(struct device *dev,
1016 struct device_attribute *attr, char *buf)
1018 struct bh1770_chip *chip = dev_get_drvdata(dev);
1019 return sprintf(buf, "%d\n", lux_rates_hz[chip->lux_rate_index]);
1022 static ssize_t bh1770_set_lux_rate(struct device *dev,
1023 struct device_attribute *attr,
1024 const char *buf, size_t count)
1026 struct bh1770_chip *chip = dev_get_drvdata(dev);
1027 unsigned long rate_hz;
1030 ret = kstrtoul(buf, 0, &rate_hz);
1034 for (i = 0; i < ARRAY_SIZE(lux_rates_hz) - 1; i++)
1035 if (rate_hz >= lux_rates_hz[i])
1038 mutex_lock(&chip->mutex);
1039 chip->lux_rate_index = i;
1040 ret = bh1770_lux_rate(chip, i);
1041 mutex_unlock(&chip->mutex);
1049 static ssize_t bh1770_get_lux_thresh_above(struct device *dev,
1050 struct device_attribute *attr, char *buf)
1052 struct bh1770_chip *chip = dev_get_drvdata(dev);
1053 return sprintf(buf, "%d\n", chip->lux_threshold_hi);
1056 static ssize_t bh1770_get_lux_thresh_below(struct device *dev,
1057 struct device_attribute *attr, char *buf)
1059 struct bh1770_chip *chip = dev_get_drvdata(dev);
1060 return sprintf(buf, "%d\n", chip->lux_threshold_lo);
1063 static ssize_t bh1770_set_lux_thresh(struct bh1770_chip *chip, u16 *target,
1066 unsigned long thresh;
1069 ret = kstrtoul(buf, 0, &thresh);
1073 if (thresh > BH1770_LUX_RANGE)
1076 mutex_lock(&chip->mutex);
1079 * Don't update values in HW if we are still waiting for
1080 * first interrupt to come after device handle open call.
1082 if (!chip->lux_wait_result)
1083 ret = bh1770_lux_update_thresholds(chip,
1084 chip->lux_threshold_hi,
1085 chip->lux_threshold_lo);
1086 mutex_unlock(&chip->mutex);
1091 static ssize_t bh1770_set_lux_thresh_above(struct device *dev,
1092 struct device_attribute *attr,
1093 const char *buf, size_t len)
1095 struct bh1770_chip *chip = dev_get_drvdata(dev);
1096 int ret = bh1770_set_lux_thresh(chip, &chip->lux_threshold_hi, buf);
1102 static ssize_t bh1770_set_lux_thresh_below(struct device *dev,
1103 struct device_attribute *attr,
1104 const char *buf, size_t len)
1106 struct bh1770_chip *chip = dev_get_drvdata(dev);
1107 int ret = bh1770_set_lux_thresh(chip, &chip->lux_threshold_lo, buf);
1113 static DEVICE_ATTR(prox0_raw_en, S_IRUGO | S_IWUSR, bh1770_prox_enable_show,
1114 bh1770_prox_enable_store);
1115 static DEVICE_ATTR(prox0_thresh_above1_value, S_IRUGO | S_IWUSR,
1116 bh1770_prox_abs_thres_show,
1117 bh1770_prox_abs_thres_store);
1118 static DEVICE_ATTR(prox0_thresh_above0_value, S_IRUGO | S_IWUSR,
1119 bh1770_get_prox_thres,
1120 bh1770_set_prox_thres);
1121 static DEVICE_ATTR(prox0_raw, S_IRUGO, bh1770_prox_result_show, NULL);
1122 static DEVICE_ATTR(prox0_sensor_range, S_IRUGO, bh1770_prox_range_show, NULL);
1123 static DEVICE_ATTR(prox0_thresh_above_count, S_IRUGO | S_IWUSR,
1124 bh1770_prox_persistence_show,
1125 bh1770_prox_persistence_store);
1126 static DEVICE_ATTR(prox0_rate_above, S_IRUGO | S_IWUSR,
1127 bh1770_get_prox_rate_above,
1128 bh1770_set_prox_rate_above);
1129 static DEVICE_ATTR(prox0_rate_below, S_IRUGO | S_IWUSR,
1130 bh1770_get_prox_rate_below,
1131 bh1770_set_prox_rate_below);
1132 static DEVICE_ATTR(prox0_rate_avail, S_IRUGO, bh1770_get_prox_rate_avail, NULL);
1134 static DEVICE_ATTR(lux0_calibscale, S_IRUGO | S_IWUSR, bh1770_lux_calib_show,
1135 bh1770_lux_calib_store);
1136 static DEVICE_ATTR(lux0_calibscale_default, S_IRUGO,
1137 bh1770_lux_calib_default_show,
1139 static DEVICE_ATTR(lux0_input, S_IRUGO, bh1770_lux_result_show, NULL);
1140 static DEVICE_ATTR(lux0_sensor_range, S_IRUGO, bh1770_lux_range_show, NULL);
1141 static DEVICE_ATTR(lux0_rate, S_IRUGO | S_IWUSR, bh1770_get_lux_rate,
1142 bh1770_set_lux_rate);
1143 static DEVICE_ATTR(lux0_rate_avail, S_IRUGO, bh1770_get_lux_rate_avail, NULL);
1144 static DEVICE_ATTR(lux0_thresh_above_value, S_IRUGO | S_IWUSR,
1145 bh1770_get_lux_thresh_above,
1146 bh1770_set_lux_thresh_above);
1147 static DEVICE_ATTR(lux0_thresh_below_value, S_IRUGO | S_IWUSR,
1148 bh1770_get_lux_thresh_below,
1149 bh1770_set_lux_thresh_below);
1150 static DEVICE_ATTR(chip_id, S_IRUGO, bh1770_chip_id_show, NULL);
1151 static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, bh1770_power_state_show,
1152 bh1770_power_state_store);
1155 static struct attribute *sysfs_attrs[] = {
1156 &dev_attr_lux0_calibscale.attr,
1157 &dev_attr_lux0_calibscale_default.attr,
1158 &dev_attr_lux0_input.attr,
1159 &dev_attr_lux0_sensor_range.attr,
1160 &dev_attr_lux0_rate.attr,
1161 &dev_attr_lux0_rate_avail.attr,
1162 &dev_attr_lux0_thresh_above_value.attr,
1163 &dev_attr_lux0_thresh_below_value.attr,
1164 &dev_attr_prox0_raw.attr,
1165 &dev_attr_prox0_sensor_range.attr,
1166 &dev_attr_prox0_raw_en.attr,
1167 &dev_attr_prox0_thresh_above_count.attr,
1168 &dev_attr_prox0_rate_above.attr,
1169 &dev_attr_prox0_rate_below.attr,
1170 &dev_attr_prox0_rate_avail.attr,
1171 &dev_attr_prox0_thresh_above0_value.attr,
1172 &dev_attr_prox0_thresh_above1_value.attr,
1173 &dev_attr_chip_id.attr,
1174 &dev_attr_power_state.attr,
1178 static struct attribute_group bh1770_attribute_group = {
1179 .attrs = sysfs_attrs
1182 static int bh1770_probe(struct i2c_client *client,
1183 const struct i2c_device_id *id)
1185 struct bh1770_chip *chip;
1188 chip = devm_kzalloc(&client->dev, sizeof *chip, GFP_KERNEL);
1192 i2c_set_clientdata(client, chip);
1193 chip->client = client;
1195 mutex_init(&chip->mutex);
1196 init_waitqueue_head(&chip->wait);
1197 INIT_DELAYED_WORK(&chip->prox_work, bh1770_prox_work);
1199 if (client->dev.platform_data == NULL) {
1200 dev_err(&client->dev, "platform data is mandatory\n");
1204 chip->pdata = client->dev.platform_data;
1205 chip->lux_calib = BH1770_LUX_NEUTRAL_CALIB_VALUE;
1206 chip->lux_rate_index = BH1770_LUX_DEFAULT_RATE;
1207 chip->lux_threshold_lo = BH1770_LUX_DEF_THRES;
1208 chip->lux_threshold_hi = BH1770_LUX_DEF_THRES;
1210 if (chip->pdata->glass_attenuation == 0)
1211 chip->lux_ga = BH1770_NEUTRAL_GA;
1213 chip->lux_ga = chip->pdata->glass_attenuation;
1215 chip->prox_threshold = BH1770_PROX_DEF_THRES;
1216 chip->prox_led = chip->pdata->led_def_curr;
1217 chip->prox_abs_thres = BH1770_PROX_DEF_ABS_THRES;
1218 chip->prox_persistence = BH1770_DEFAULT_PERSISTENCE;
1219 chip->prox_rate_threshold = BH1770_PROX_DEF_RATE_THRESH;
1220 chip->prox_rate = BH1770_PROX_DEFAULT_RATE;
1221 chip->prox_data = 0;
1223 chip->regs[0].supply = reg_vcc;
1224 chip->regs[1].supply = reg_vleds;
1226 err = devm_regulator_bulk_get(&client->dev,
1227 ARRAY_SIZE(chip->regs), chip->regs);
1229 dev_err(&client->dev, "Cannot get regulators\n");
1233 err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
1236 dev_err(&client->dev, "Cannot enable regulators\n");
1240 usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2);
1241 err = bh1770_detect(chip);
1246 bh1770_chip_on(chip);
1247 pm_runtime_set_active(&client->dev);
1248 pm_runtime_enable(&client->dev);
1250 chip->lux_corr = bh1770_get_corr_value(chip);
1251 if (chip->lux_corr == 0) {
1252 dev_err(&client->dev, "Improper correction values\n");
1257 if (chip->pdata->setup_resources) {
1258 err = chip->pdata->setup_resources();
1265 err = sysfs_create_group(&chip->client->dev.kobj,
1266 &bh1770_attribute_group);
1268 dev_err(&chip->client->dev, "Sysfs registration failed\n");
1273 * Chip needs level triggered interrupt to work. However,
1274 * level triggering doesn't work always correctly with power
1275 * management. Select both
1277 err = request_threaded_irq(client->irq, NULL,
1279 IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
1283 dev_err(&client->dev, "could not get IRQ %d\n",
1287 regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
1290 sysfs_remove_group(&chip->client->dev.kobj,
1291 &bh1770_attribute_group);
1293 if (chip->pdata->release_resources)
1294 chip->pdata->release_resources();
1296 regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
1300 static int bh1770_remove(struct i2c_client *client)
1302 struct bh1770_chip *chip = i2c_get_clientdata(client);
1304 free_irq(client->irq, chip);
1306 sysfs_remove_group(&chip->client->dev.kobj,
1307 &bh1770_attribute_group);
1309 if (chip->pdata->release_resources)
1310 chip->pdata->release_resources();
1312 cancel_delayed_work_sync(&chip->prox_work);
1314 if (!pm_runtime_suspended(&client->dev))
1315 bh1770_chip_off(chip);
1317 pm_runtime_disable(&client->dev);
1318 pm_runtime_set_suspended(&client->dev);
1323 #ifdef CONFIG_PM_SLEEP
1324 static int bh1770_suspend(struct device *dev)
1326 struct i2c_client *client = container_of(dev, struct i2c_client, dev);
1327 struct bh1770_chip *chip = i2c_get_clientdata(client);
1329 bh1770_chip_off(chip);
1334 static int bh1770_resume(struct device *dev)
1336 struct i2c_client *client = container_of(dev, struct i2c_client, dev);
1337 struct bh1770_chip *chip = i2c_get_clientdata(client);
1340 bh1770_chip_on(chip);
1342 if (!pm_runtime_suspended(dev)) {
1344 * If we were enabled at suspend time, it is expected
1345 * everything works nice and smoothly
1347 ret = bh1770_lux_rate(chip, chip->lux_rate_index);
1348 ret |= bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
1350 /* This causes interrupt after the next measurement cycle */
1351 bh1770_lux_update_thresholds(chip, BH1770_LUX_DEF_THRES,
1352 BH1770_LUX_DEF_THRES);
1353 /* Inform that we are waiting for a result from ALS */
1354 chip->lux_wait_result = true;
1355 bh1770_prox_mode_control(chip);
1362 static int bh1770_runtime_suspend(struct device *dev)
1364 struct i2c_client *client = container_of(dev, struct i2c_client, dev);
1365 struct bh1770_chip *chip = i2c_get_clientdata(client);
1367 bh1770_chip_off(chip);
1372 static int bh1770_runtime_resume(struct device *dev)
1374 struct i2c_client *client = container_of(dev, struct i2c_client, dev);
1375 struct bh1770_chip *chip = i2c_get_clientdata(client);
1377 bh1770_chip_on(chip);
1383 static const struct i2c_device_id bh1770_id[] = {
1389 MODULE_DEVICE_TABLE(i2c, bh1770_id);
1391 static const struct dev_pm_ops bh1770_pm_ops = {
1392 SET_SYSTEM_SLEEP_PM_OPS(bh1770_suspend, bh1770_resume)
1393 SET_RUNTIME_PM_OPS(bh1770_runtime_suspend, bh1770_runtime_resume, NULL)
1396 static struct i2c_driver bh1770_driver = {
1398 .name = "bh1770glc",
1399 .pm = &bh1770_pm_ops,
1401 .probe = bh1770_probe,
1402 .remove = bh1770_remove,
1403 .id_table = bh1770_id,
1406 module_i2c_driver(bh1770_driver);
1408 MODULE_DESCRIPTION("BH1770GLC / SFH7770 combined ALS and proximity sensor");
1409 MODULE_AUTHOR("Samu Onkalo, Nokia Corporation");
1410 MODULE_LICENSE("GPL v2");