1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright(c) 2009 Ian Molton <spyro@f2s.com>
6 #include <linux/export.h>
7 #include <linux/mfd/tmio.h>
10 #define CNF_CTL_BASE 0x10
11 #define CNF_INT_PIN 0x3d
12 #define CNF_STOP_CLK_CTL 0x40
13 #define CNF_GCLK_CTL 0x41
14 #define CNF_SD_CLK_MODE 0x42
15 #define CNF_PIN_STATUS 0x44
16 #define CNF_PWR_CTL_1 0x48
17 #define CNF_PWR_CTL_2 0x49
18 #define CNF_PWR_CTL_3 0x4a
19 #define CNF_CARD_DETECT_MODE 0x4c
20 #define CNF_SD_SLOT 0x50
21 #define CNF_EXT_GCLK_CTL_1 0xf0
22 #define CNF_EXT_GCLK_CTL_2 0xf1
23 #define CNF_EXT_GCLK_CTL_3 0xf9
24 #define CNF_SD_LED_EN_1 0xfa
25 #define CNF_SD_LED_EN_2 0xfe
27 #define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
29 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
31 /* Enable the MMC/SD Control registers */
32 sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
33 sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
35 /* Disable SD power during suspend */
36 sd_config_write8(cnf, shift, CNF_PWR_CTL_3, 0x01);
38 /* The below is required but why? FIXME */
39 sd_config_write8(cnf, shift, CNF_STOP_CLK_CTL, 0x1f);
41 /* Power down SD bus */
42 sd_config_write8(cnf, shift, CNF_PWR_CTL_2, 0x00);
46 EXPORT_SYMBOL(tmio_core_mmc_enable);
48 int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base)
51 /* Enable the MMC/SD Control registers */
52 sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
53 sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
57 EXPORT_SYMBOL(tmio_core_mmc_resume);
59 void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state)
61 sd_config_write8(cnf, shift, CNF_PWR_CTL_2, state ? 0x02 : 0x00);
63 EXPORT_SYMBOL(tmio_core_mmc_pwr);
65 void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state)
67 sd_config_write8(cnf, shift, CNF_SD_CLK_MODE, state ? 1 : 0);
69 EXPORT_SYMBOL(tmio_core_mmc_clk_div);