GNU Linux-libre 5.19-rc6-gnu
[releases.git] / drivers / mfd / rn5t618.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * MFD core driver for Ricoh RN5T618 PMIC
4  *
5  * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
6  * Copyright (C) 2016 Toradex AG
7  */
8
9 #include <linux/delay.h>
10 #include <linux/i2c.h>
11 #include <linux/interrupt.h>
12 #include <linux/irq.h>
13 #include <linux/mfd/core.h>
14 #include <linux/mfd/rn5t618.h>
15 #include <linux/module.h>
16 #include <linux/of_device.h>
17 #include <linux/platform_device.h>
18 #include <linux/reboot.h>
19 #include <linux/regmap.h>
20
21 static const struct mfd_cell rn5t618_cells[] = {
22         { .name = "rn5t618-regulator" },
23         { .name = "rn5t618-wdt" },
24 };
25
26 static const struct mfd_cell rc5t619_cells[] = {
27         { .name = "rn5t618-adc" },
28         { .name = "rn5t618-power" },
29         { .name = "rn5t618-regulator" },
30         { .name = "rc5t619-rtc" },
31         { .name = "rn5t618-wdt" },
32 };
33
34 static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
35 {
36         switch (reg) {
37         case RN5T618_WATCHDOGCNT:
38         case RN5T618_DCIRQ:
39         case RN5T618_ILIMDATAH ... RN5T618_AIN0DATAL:
40         case RN5T618_ADCCNT3:
41         case RN5T618_IR_ADC1 ... RN5T618_IR_ADC3:
42         case RN5T618_IR_GPR:
43         case RN5T618_IR_GPF:
44         case RN5T618_MON_IOIN:
45         case RN5T618_INTMON:
46         case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
47         case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
48         case RN5T618_CHGCTL1:
49         case RN5T618_REGISET1 ... RN5T618_REGISET2:
50         case RN5T618_CHGSTATE:
51         case RN5T618_CHGCTRL_IRR ... RN5T618_CHGERR_MONI:
52         case RN5T618_GCHGDET:
53         case RN5T618_CONTROL ... RN5T618_CC_AVEREG0:
54                 return true;
55         default:
56                 return false;
57         }
58 }
59
60 static const struct regmap_config rn5t618_regmap_config = {
61         .reg_bits       = 8,
62         .val_bits       = 8,
63         .volatile_reg   = rn5t618_volatile_reg,
64         .max_register   = RN5T618_MAX_REG,
65         .cache_type     = REGCACHE_RBTREE,
66 };
67
68 static const struct regmap_irq rc5t619_irqs[] = {
69         REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
70         REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
71         REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
72         REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
73         REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
74         REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
75 };
76
77 static const struct regmap_irq_chip rc5t619_irq_chip = {
78         .name = "rc5t619",
79         .irqs = rc5t619_irqs,
80         .num_irqs = ARRAY_SIZE(rc5t619_irqs),
81         .num_regs = 1,
82         .status_base = RN5T618_INTMON,
83         .mask_base = RN5T618_INTEN,
84         .mask_invert = true,
85 };
86
87 static struct i2c_client *rn5t618_pm_power_off;
88 static struct notifier_block rn5t618_restart_handler;
89
90 static int rn5t618_irq_init(struct rn5t618 *rn5t618)
91 {
92         const struct regmap_irq_chip *irq_chip = NULL;
93         int ret;
94
95         if (!rn5t618->irq)
96                 return 0;
97
98         switch (rn5t618->variant) {
99         case RC5T619:
100                 irq_chip = &rc5t619_irq_chip;
101                 break;
102         default:
103                 dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
104                         (int)rn5t618->variant);
105                 return -ENOENT;
106         }
107
108         ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
109                                        rn5t618->irq,
110                                        IRQF_TRIGGER_LOW | IRQF_ONESHOT,
111                                        0, irq_chip, &rn5t618->irq_data);
112         if (ret)
113                 dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
114
115         return ret;
116 }
117
118 static void rn5t618_trigger_poweroff_sequence(bool repower)
119 {
120         int ret;
121
122         /* disable automatic repower-on */
123         ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_REPCNT);
124         if (ret < 0)
125                 goto err;
126
127         ret &= ~RN5T618_REPCNT_REPWRON;
128         if (repower)
129                 ret |= RN5T618_REPCNT_REPWRON;
130
131         ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
132                                         RN5T618_REPCNT, (u8)ret);
133         if (ret < 0)
134                 goto err;
135
136         /* start power-off sequence */
137         ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_SLPCNT);
138         if (ret < 0)
139                 goto err;
140
141         ret |= RN5T618_SLPCNT_SWPWROFF;
142
143         ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
144                                         RN5T618_SLPCNT, (u8)ret);
145         if (ret < 0)
146                 goto err;
147
148         return;
149
150 err:
151         dev_alert(&rn5t618_pm_power_off->dev, "Failed to shutdown (err = %d)\n", ret);
152 }
153
154 static void rn5t618_power_off(void)
155 {
156         rn5t618_trigger_poweroff_sequence(false);
157 }
158
159 static int rn5t618_restart(struct notifier_block *this,
160                             unsigned long mode, void *cmd)
161 {
162         rn5t618_trigger_poweroff_sequence(true);
163
164         /*
165          * Re-power factor detection on PMIC side is not instant. 1ms
166          * proved to be enough time until reset takes effect.
167          */
168         mdelay(1);
169
170         return NOTIFY_DONE;
171 }
172
173 static const struct of_device_id rn5t618_of_match[] = {
174         { .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
175         { .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
176         { .compatible = "ricoh,rc5t619", .data = (void *)RC5T619 },
177         { }
178 };
179 MODULE_DEVICE_TABLE(of, rn5t618_of_match);
180
181 static int rn5t618_i2c_probe(struct i2c_client *i2c)
182 {
183         const struct of_device_id *of_id;
184         struct rn5t618 *priv;
185         int ret;
186
187         of_id = of_match_device(rn5t618_of_match, &i2c->dev);
188         if (!of_id) {
189                 dev_err(&i2c->dev, "Failed to find matching DT ID\n");
190                 return -EINVAL;
191         }
192
193         priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
194         if (!priv)
195                 return -ENOMEM;
196
197         i2c_set_clientdata(i2c, priv);
198         priv->variant = (long)of_id->data;
199         priv->irq = i2c->irq;
200         priv->dev = &i2c->dev;
201
202         priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
203         if (IS_ERR(priv->regmap)) {
204                 ret = PTR_ERR(priv->regmap);
205                 dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
206                 return ret;
207         }
208
209         if (priv->variant == RC5T619)
210                 ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
211                                            rc5t619_cells,
212                                            ARRAY_SIZE(rc5t619_cells),
213                                            NULL, 0, NULL);
214         else
215                 ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
216                                            rn5t618_cells,
217                                            ARRAY_SIZE(rn5t618_cells),
218                                            NULL, 0, NULL);
219         if (ret) {
220                 dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
221                 return ret;
222         }
223
224         rn5t618_pm_power_off = i2c;
225         if (of_device_is_system_power_controller(i2c->dev.of_node)) {
226                 if (!pm_power_off)
227                         pm_power_off = rn5t618_power_off;
228                 else
229                         dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
230         }
231
232         rn5t618_restart_handler.notifier_call = rn5t618_restart;
233         rn5t618_restart_handler.priority = 192;
234
235         ret = register_restart_handler(&rn5t618_restart_handler);
236         if (ret) {
237                 dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret);
238                 return ret;
239         }
240
241         return rn5t618_irq_init(priv);
242 }
243
244 static int rn5t618_i2c_remove(struct i2c_client *i2c)
245 {
246         if (i2c == rn5t618_pm_power_off) {
247                 rn5t618_pm_power_off = NULL;
248                 pm_power_off = NULL;
249         }
250
251         unregister_restart_handler(&rn5t618_restart_handler);
252
253         return 0;
254 }
255
256 static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
257 {
258         struct rn5t618 *priv = dev_get_drvdata(dev);
259
260         if (priv->irq)
261                 disable_irq(priv->irq);
262
263         return 0;
264 }
265
266 static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
267 {
268         struct rn5t618 *priv = dev_get_drvdata(dev);
269
270         if (priv->irq)
271                 enable_irq(priv->irq);
272
273         return 0;
274 }
275
276 static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
277                         rn5t618_i2c_suspend,
278                         rn5t618_i2c_resume);
279
280 static struct i2c_driver rn5t618_i2c_driver = {
281         .driver = {
282                 .name = "rn5t618",
283                 .of_match_table = of_match_ptr(rn5t618_of_match),
284                 .pm = &rn5t618_i2c_dev_pm_ops,
285         },
286         .probe_new = rn5t618_i2c_probe,
287         .remove = rn5t618_i2c_remove,
288 };
289
290 module_i2c_driver(rn5t618_i2c_driver);
291
292 MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
293 MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver");
294 MODULE_LICENSE("GPL v2");