1 // SPDX-License-Identifier: GPL-2.0-only
3 * linux/drivers/mfd/mcp-sa11x0.c
5 * Copyright (C) 2001-2005 Russell King
7 * SA11x0 MCP (Multimedia Communications Port) driver.
9 * MCP read/write timeouts from Jordi Colomer, rehacked by rmk.
11 #include <linux/module.h>
13 #include <linux/errno.h>
14 #include <linux/kernel.h>
15 #include <linux/delay.h>
16 #include <linux/spinlock.h>
17 #include <linux/platform_device.h>
19 #include <linux/mfd/mcp.h>
21 #include <mach/hardware.h>
22 #include <asm/mach-types.h>
23 #include <linux/platform_data/mfd-mcp-sa11x0.h>
25 #define DRIVER_NAME "sa11x0-mcp"
34 /* Register offsets */
35 #define MCCR0(m) ((m)->base0 + 0x00)
36 #define MCDR0(m) ((m)->base0 + 0x08)
37 #define MCDR1(m) ((m)->base0 + 0x0c)
38 #define MCDR2(m) ((m)->base0 + 0x10)
39 #define MCSR(m) ((m)->base0 + 0x18)
40 #define MCCR1(m) ((m)->base1 + 0x00)
42 #define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp))
45 mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
47 struct mcp_sa11x0 *m = priv(mcp);
51 m->mccr0 &= ~0x00007f00;
52 m->mccr0 |= divisor << 8;
53 writel_relaxed(m->mccr0, MCCR0(m));
57 mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
59 struct mcp_sa11x0 *m = priv(mcp);
63 m->mccr0 &= ~0x0000007f;
65 writel_relaxed(m->mccr0, MCCR0(m));
69 * Write data to the device. The bit should be set after 3 subframe
70 * times (each frame is 64 clocks). We wait a maximum of 6 subframes.
71 * We really should try doing something more productive while we
75 mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
77 struct mcp_sa11x0 *m = priv(mcp);
81 writel_relaxed(reg << 17 | MCDR2_Wr | (val & 0xffff), MCDR2(m));
83 for (i = 0; i < 2; i++) {
84 udelay(mcp->rw_timeout);
85 if (readl_relaxed(MCSR(m)) & MCSR_CWC) {
92 printk(KERN_WARNING "mcp: write timed out\n");
96 * Read data from the device. The bit should be set after 3 subframe
97 * times (each frame is 64 clocks). We wait a maximum of 6 subframes.
98 * We really should try doing something more productive while we
102 mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
104 struct mcp_sa11x0 *m = priv(mcp);
108 writel_relaxed(reg << 17 | MCDR2_Rd, MCDR2(m));
110 for (i = 0; i < 2; i++) {
111 udelay(mcp->rw_timeout);
112 if (readl_relaxed(MCSR(m)) & MCSR_CRC) {
113 ret = readl_relaxed(MCDR2(m)) & 0xffff;
119 printk(KERN_WARNING "mcp: read timed out\n");
124 static void mcp_sa11x0_enable(struct mcp *mcp)
126 struct mcp_sa11x0 *m = priv(mcp);
129 m->mccr0 |= MCCR0_MCE;
130 writel_relaxed(m->mccr0, MCCR0(m));
133 static void mcp_sa11x0_disable(struct mcp *mcp)
135 struct mcp_sa11x0 *m = priv(mcp);
137 m->mccr0 &= ~MCCR0_MCE;
138 writel_relaxed(m->mccr0, MCCR0(m));
144 static struct mcp_ops mcp_sa11x0 = {
145 .set_telecom_divisor = mcp_sa11x0_set_telecom_divisor,
146 .set_audio_divisor = mcp_sa11x0_set_audio_divisor,
147 .reg_write = mcp_sa11x0_write,
148 .reg_read = mcp_sa11x0_read,
149 .enable = mcp_sa11x0_enable,
150 .disable = mcp_sa11x0_disable,
153 static int mcp_sa11x0_probe(struct platform_device *dev)
155 struct mcp_plat_data *data = dev_get_platdata(&dev->dev);
156 struct resource *mem0, *mem1;
157 struct mcp_sa11x0 *m;
164 mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
165 mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
169 if (!request_mem_region(mem0->start, resource_size(mem0),
175 if (!request_mem_region(mem1->start, resource_size(mem1),
181 mcp = mcp_host_alloc(&dev->dev, sizeof(struct mcp_sa11x0));
187 mcp->owner = THIS_MODULE;
188 mcp->ops = &mcp_sa11x0;
189 mcp->sclk_rate = data->sclk_rate;
192 m->mccr0 = data->mccr0 | 0x7f7f;
193 m->mccr1 = data->mccr1;
195 m->base0 = ioremap(mem0->start, resource_size(mem0));
196 m->base1 = ioremap(mem1->start, resource_size(mem1));
197 if (!m->base0 || !m->base1) {
202 platform_set_drvdata(dev, mcp);
205 * Initialise device. Note that we initially
206 * set the sampling rate to minimum.
208 writel_relaxed(-1, MCSR(m));
209 writel_relaxed(m->mccr1, MCCR1(m));
210 writel_relaxed(m->mccr0, MCCR0(m));
213 * Calculate the read/write timeout (us) from the bit clock
214 * rate. This is the period for 3 64-bit frames. Always
215 * round this time up.
217 mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
220 ret = mcp_host_add(mcp, data->codec_pdata);
229 release_mem_region(mem1->start, resource_size(mem1));
231 release_mem_region(mem0->start, resource_size(mem0));
236 static int mcp_sa11x0_remove(struct platform_device *dev)
238 struct mcp *mcp = platform_get_drvdata(dev);
239 struct mcp_sa11x0 *m = priv(mcp);
240 struct resource *mem0, *mem1;
242 if (m->mccr0 & MCCR0_MCE)
244 "device left active (missing disable call?)\n");
246 mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
247 mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
253 release_mem_region(mem1->start, resource_size(mem1));
254 release_mem_region(mem0->start, resource_size(mem0));
259 #ifdef CONFIG_PM_SLEEP
260 static int mcp_sa11x0_suspend(struct device *dev)
262 struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
264 if (m->mccr0 & MCCR0_MCE)
265 dev_warn(dev, "device left active (missing disable call?)\n");
267 writel(m->mccr0 & ~MCCR0_MCE, MCCR0(m));
272 static int mcp_sa11x0_resume(struct device *dev)
274 struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
276 writel_relaxed(m->mccr1, MCCR1(m));
277 writel_relaxed(m->mccr0, MCCR0(m));
283 static const struct dev_pm_ops mcp_sa11x0_pm_ops = {
284 #ifdef CONFIG_PM_SLEEP
285 .suspend = mcp_sa11x0_suspend,
286 .freeze = mcp_sa11x0_suspend,
287 .poweroff = mcp_sa11x0_suspend,
288 .resume_noirq = mcp_sa11x0_resume,
289 .thaw_noirq = mcp_sa11x0_resume,
290 .restore_noirq = mcp_sa11x0_resume,
294 static struct platform_driver mcp_sa11x0_driver = {
295 .probe = mcp_sa11x0_probe,
296 .remove = mcp_sa11x0_remove,
299 .pm = &mcp_sa11x0_pm_ops,
304 * This needs re-working
306 module_platform_driver(mcp_sa11x0_driver);
308 MODULE_ALIAS("platform:" DRIVER_NAME);
309 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
310 MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
311 MODULE_LICENSE("GPL");