drivers/message/fusion/mptbase.c

   1 /*
   2  *  linux/drivers/message/fusion/mptbase.c
   3  *      This is the Fusion MPT base driver which supports multiple
   4  *      (SCSI + LAN) specialized protocol drivers.
   5  *      For use with LSI PCI chip/adapter(s)
   6  *      running LSI Fusion MPT (Message Passing Technology) firmware.
   7  *
   8  *  Copyright (c) 1999-2008 LSI Corporation
   9  *  (mailto:DL-MPTFusionLinux@lsi.com)
  10  *
  11  */
  12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  13 /*
  14     This program is free software; you can redistribute it and/or modify
  15     it under the terms of the GNU General Public License as published by
  16     the Free Software Foundation; version 2 of the License.
  17
  18     This program is distributed in the hope that it will be useful,
  19     but WITHOUT ANY WARRANTY; without even the implied warranty of
  20     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21     GNU General Public License for more details.
  22
  23     NO WARRANTY
  24     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  25     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  26     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  27     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  28     solely responsible for determining the appropriateness of using and
  29     distributing the Program and assumes all risks associated with its
  30     exercise of rights under this Agreement, including but not limited to
  31     the risks and costs of program errors, damage to or loss of data,
  32     programs or equipment, and unavailability or interruption of operations.
  33
  34     DISCLAIMER OF LIABILITY
  35     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  36     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  38     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  39     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  40     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  41     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  42
  43     You should have received a copy of the GNU General Public License
  44     along with this program; if not, write to the Free Software
  45     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  46 */
  47 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  48
  49 #include <linux/kernel.h>
  50 #include <linux/module.h>
  51 #include <linux/errno.h>
  52 #include <linux/init.h>
  53 #include <linux/seq_file.h>
  54 #include <linux/slab.h>
  55 #include <linux/types.h>
  56 #include <linux/pci.h>
  57 #include <linux/kdev_t.h>
  58 #include <linux/blkdev.h>
  59 #include <linux/delay.h>
  60 #include <linux/interrupt.h>            /* needed for in_interrupt() proto */
  61 #include <linux/dma-mapping.h>
  62 #include <linux/kthread.h>
  63 #include <scsi/scsi_host.h>
  64
  65 #include "mptbase.h"
  66 #include "lsi/mpi_log_fc.h"
  67
  68 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  69 #define my_NAME         "Fusion MPT base driver"
  70 #define my_VERSION      MPT_LINUX_VERSION_COMMON
  71 #define MYNAM           "mptbase"
  72
  73 MODULE_AUTHOR(MODULEAUTHOR);
  74 MODULE_DESCRIPTION(my_NAME);
  75 MODULE_LICENSE("GPL");
  76 MODULE_VERSION(my_VERSION);
  77
  78 /*
  79  *  cmd line parameters
  80  */
  81
  82 static int mpt_msi_enable_spi;
  83 module_param(mpt_msi_enable_spi, int, 0);
  84 MODULE_PARM_DESC(mpt_msi_enable_spi,
  85                  " Enable MSI Support for SPI controllers (default=0)");
  86
  87 static int mpt_msi_enable_fc;
  88 module_param(mpt_msi_enable_fc, int, 0);
  89 MODULE_PARM_DESC(mpt_msi_enable_fc,
  90                  " Enable MSI Support for FC controllers (default=0)");
  91
  92 static int mpt_msi_enable_sas;
  93 module_param(mpt_msi_enable_sas, int, 0);
  94 MODULE_PARM_DESC(mpt_msi_enable_sas,
  95                  " Enable MSI Support for SAS controllers (default=0)");
  96
  97 static int mpt_channel_mapping;
  98 module_param(mpt_channel_mapping, int, 0);
  99 MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
 100
 101 static int mpt_debug_level;
 102 static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
 103 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
 104                   &mpt_debug_level, 0600);
 105 MODULE_PARM_DESC(mpt_debug_level,
 106                  " debug level - refer to mptdebug.h - (default=0)");
 107
 108 int mpt_fwfault_debug;
 109 EXPORT_SYMBOL(mpt_fwfault_debug);
 110 module_param(mpt_fwfault_debug, int, 0600);
 111 MODULE_PARM_DESC(mpt_fwfault_debug,
 112                  "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
 113
 114 static char     MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
 115                                 [MPT_MAX_CALLBACKNAME_LEN+1];
 116
 117 #ifdef MFCNT
 118 static int mfcounter = 0;
 119 #define PRINT_MF_COUNT 20000
 120 #endif
 121
 122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 123 /*
 124  *  Public data...
 125  */
 126
 127 #define WHOINIT_UNKNOWN         0xAA
 128
 129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 130 /*
 131  *  Private data...
 132  */
 133                                         /* Adapter link list */
 134 LIST_HEAD(ioc_list);
 135                                         /* Callback lookup table */
 136 static MPT_CALLBACK              MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
 137                                         /* Protocol driver class lookup table */
 138 static int                       MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
 139                                         /* Event handler lookup table */
 140 static MPT_EVHANDLER             MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 141                                         /* Reset handler lookup table */
 142 static MPT_RESETHANDLER          MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 143 static struct mpt_pci_driver    *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 144
 145 #ifdef CONFIG_PROC_FS
 146 static struct proc_dir_entry    *mpt_proc_root_dir;
 147 #endif
 148
 149 /*
 150  *  Driver Callback Index's
 151  */
 152 static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
 153 static u8 last_drv_idx;
 154
 155 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 156 /*
 157  *  Forward protos...
 158  */
 159 static irqreturn_t mpt_interrupt(int irq, void *bus_id);
 160 static int      mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
 161                 MPT_FRAME_HDR *reply);
 162 static int      mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
 163                         u32 *req, int replyBytes, u16 *u16reply, int maxwait,
 164                         int sleepFlag);
 165 static int      mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
 166 static void     mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
 167 static void     mpt_adapter_disable(MPT_ADAPTER *ioc);
 168 static void     mpt_adapter_dispose(MPT_ADAPTER *ioc);
 169
 170 static void     MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
 171 static int      MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
 172 static int      GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
 173 static int      GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
 174 static int      SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
 175 static int      SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
 176 static int      mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
 177 static int      mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
 178 static int      mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
 179 static int      KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
 180 static int      SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
 181 static int      PrimeIocFifos(MPT_ADAPTER *ioc);
 182 static int      WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
 183 static int      WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
 184 static int      WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
 185 static int      GetLanConfigPages(MPT_ADAPTER *ioc);
 186 static int      GetIoUnitPage2(MPT_ADAPTER *ioc);
 187 int             mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
 188 static int      mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
 189 static int      mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
 190 static void     mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
 191 static void     mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
 192 static void     mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
 193 static int      SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
 194         int sleepFlag);
 195 static int      SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
 196 static int      mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
 197 static int      mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
 198
 199 #ifdef CONFIG_PROC_FS
 200 static const struct file_operations mpt_summary_proc_fops;
 201 static const struct file_operations mpt_version_proc_fops;
 202 static const struct file_operations mpt_iocinfo_proc_fops;
 203 #endif
 204 static void     mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
 205
 206 static int      ProcessEventNotification(MPT_ADAPTER *ioc,
 207                 EventNotificationReply_t *evReply, int *evHandlers);
 208 static void     mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
 209 static void     mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
 210 static void     mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
 211 static void     mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
 212 static int      mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
 213 static void     mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
 214
 215 /* module entry point */
 216 static int  __init    fusion_init  (void);
 217 static void __exit    fusion_exit  (void);
 218
 219 #define CHIPREG_READ32(addr)            readl_relaxed(addr)
 220 #define CHIPREG_READ32_dmasync(addr)    readl(addr)
 221 #define CHIPREG_WRITE32(addr,val)       writel(val, addr)
 222 #define CHIPREG_PIO_WRITE32(addr,val)   outl(val, (unsigned long)addr)
 223 #define CHIPREG_PIO_READ32(addr)        inl((unsigned long)addr)
 224
 225 static void
 226 pci_disable_io_access(struct pci_dev *pdev)
 227 {
 228         u16 command_reg;
 229
 230         pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
 231         command_reg &= ~1;
 232         pci_write_config_word(pdev, PCI_COMMAND, command_reg);
 233 }
 234
 235 static void
 236 pci_enable_io_access(struct pci_dev *pdev)
 237 {
 238         u16 command_reg;
 239
 240         pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
 241         command_reg |= 1;
 242         pci_write_config_word(pdev, PCI_COMMAND, command_reg);
 243 }
 244
 245 static int mpt_set_debug_level(const char *val, struct kernel_param *kp)
 246 {
 247         int ret = param_set_int(val, kp);
 248         MPT_ADAPTER *ioc;
 249
 250         if (ret)
 251                 return ret;
 252
 253         list_for_each_entry(ioc, &ioc_list, list)
 254                 ioc->debug_level = mpt_debug_level;
 255         return 0;
 256 }
 257
 258 /**
 259  *      mpt_get_cb_idx - obtain cb_idx for registered driver
 260  *      @dclass: class driver enum
 261  *
 262  *      Returns cb_idx, or zero means it wasn't found
 263  **/
 264 static u8
 265 mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
 266 {
 267         u8 cb_idx;
 268
 269         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
 270                 if (MptDriverClass[cb_idx] == dclass)
 271                         return cb_idx;
 272         return 0;
 273 }
 274
 275 /**
 276  * mpt_is_discovery_complete - determine if discovery has completed
 277  * @ioc: per adatper instance
 278  *
 279  * Returns 1 when discovery completed, else zero.
 280  */
 281 static int
 282 mpt_is_discovery_complete(MPT_ADAPTER *ioc)
 283 {
 284         ConfigExtendedPageHeader_t hdr;
 285         CONFIGPARMS cfg;
 286         SasIOUnitPage0_t *buffer;
 287         dma_addr_t dma_handle;
 288         int rc = 0;
 289
 290         memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
 291         memset(&cfg, 0, sizeof(CONFIGPARMS));
 292         hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
 293         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 294         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
 295         cfg.cfghdr.ehdr = &hdr;
 296         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 297
 298         if ((mpt_config(ioc, &cfg)))
 299                 goto out;
 300         if (!hdr.ExtPageLength)
 301                 goto out;
 302
 303         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 304             &dma_handle);
 305         if (!buffer)
 306                 goto out;
 307
 308         cfg.physAddr = dma_handle;
 309         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 310
 311         if ((mpt_config(ioc, &cfg)))
 312                 goto out_free_consistent;
 313
 314         if (!(buffer->PhyData[0].PortFlags &
 315             MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
 316                 rc = 1;
 317
 318  out_free_consistent:
 319         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 320             buffer, dma_handle);
 321  out:
 322         return rc;
 323 }
 324
 325
 326 /**
 327  *  mpt_remove_dead_ioc_func - kthread context to remove dead ioc
 328  * @arg: input argument, used to derive ioc
 329  *
 330  * Return 0 if controller is removed from pci subsystem.
 331  * Return -1 for other case.
 332  */
 333 static int mpt_remove_dead_ioc_func(void *arg)
 334 {
 335         MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
 336         struct pci_dev *pdev;
 337
 338         if ((ioc == NULL))
 339                 return -1;
 340
 341         pdev = ioc->pcidev;
 342         if ((pdev == NULL))
 343                 return -1;
 344
 345         pci_stop_and_remove_bus_device_locked(pdev);
 346         return 0;
 347 }
 348
 349
 350
 351 /**
 352  *      mpt_fault_reset_work - work performed on workq after ioc fault
 353  *      @work: input argument, used to derive ioc
 354  *
 355 **/
 356 static void
 357 mpt_fault_reset_work(struct work_struct *work)
 358 {
 359         MPT_ADAPTER     *ioc =
 360             container_of(work, MPT_ADAPTER, fault_reset_work.work);
 361         u32              ioc_raw_state;
 362         int              rc;
 363         unsigned long    flags;
 364         MPT_SCSI_HOST   *hd;
 365         struct task_struct *p;
 366
 367         if (ioc->ioc_reset_in_progress || !ioc->active)
 368                 goto out;
 369
 370
 371         ioc_raw_state = mpt_GetIocState(ioc, 0);
 372         if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
 373                 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
 374                     ioc->name, __func__);
 375
 376                 /*
 377                  * Call mptscsih_flush_pending_cmds callback so that we
 378                  * flush all pending commands back to OS.
 379                  * This call is required to aovid deadlock at block layer.
 380                  * Dead IOC will fail to do diag reset,and this call is safe
 381                  * since dead ioc will never return any command back from HW.
 382                  */
 383                 hd = shost_priv(ioc->sh);
 384                 ioc->schedule_dead_ioc_flush_running_cmds(hd);
 385
 386                 /*Remove the Dead Host */
 387                 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
 388                                 "mpt_dead_ioc_%d", ioc->id);
 389                 if (IS_ERR(p))  {
 390                         printk(MYIOC_s_ERR_FMT
 391                                 "%s: Running mpt_dead_ioc thread failed !\n",
 392                                 ioc->name, __func__);
 393                 } else {
 394                         printk(MYIOC_s_WARN_FMT
 395                                 "%s: Running mpt_dead_ioc thread success !\n",
 396                                 ioc->name, __func__);
 397                 }
 398                 return; /* don't rearm timer */
 399         }
 400
 401         if ((ioc_raw_state & MPI_IOC_STATE_MASK)
 402                         == MPI_IOC_STATE_FAULT) {
 403                 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
 404                        ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
 405                 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
 406                        ioc->name, __func__);
 407                 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
 408                 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
 409                        __func__, (rc == 0) ? "success" : "failed");
 410                 ioc_raw_state = mpt_GetIocState(ioc, 0);
 411                 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
 412                         printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
 413                             "reset (%04xh)\n", ioc->name, ioc_raw_state &
 414                             MPI_DOORBELL_DATA_MASK);
 415         } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
 416                 if ((mpt_is_discovery_complete(ioc))) {
 417                         devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
 418                             "discovery_quiesce_io flag\n", ioc->name));
 419                         ioc->sas_discovery_quiesce_io = 0;
 420                 }
 421         }
 422
 423  out:
 424         /*
 425          * Take turns polling alternate controller
 426          */
 427         if (ioc->alt_ioc)
 428                 ioc = ioc->alt_ioc;
 429
 430         /* rearm the timer */
 431         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
 432         if (ioc->reset_work_q)
 433                 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
 434                         msecs_to_jiffies(MPT_POLLING_INTERVAL));
 435         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 436 }
 437
 438
 439 /*
 440  *  Process turbo (context) reply...
 441  */
 442 static void
 443 mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
 444 {
 445         MPT_FRAME_HDR *mf = NULL;
 446         MPT_FRAME_HDR *mr = NULL;
 447         u16 req_idx = 0;
 448         u8 cb_idx;
 449
 450         dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
 451                                 ioc->name, pa));
 452
 453         switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
 454         case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
 455                 req_idx = pa & 0x0000FFFF;
 456                 cb_idx = (pa & 0x00FF0000) >> 16;
 457                 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
 458                 break;
 459         case MPI_CONTEXT_REPLY_TYPE_LAN:
 460                 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
 461                 /*
 462                  *  Blind set of mf to NULL here was fatal
 463                  *  after lan_reply says "freeme"
 464                  *  Fix sort of combined with an optimization here;
 465                  *  added explicit check for case where lan_reply
 466                  *  was just returning 1 and doing nothing else.
 467                  *  For this case skip the callback, but set up
 468                  *  proper mf value first here:-)
 469                  */
 470                 if ((pa & 0x58000000) == 0x58000000) {
 471                         req_idx = pa & 0x0000FFFF;
 472                         mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
 473                         mpt_free_msg_frame(ioc, mf);
 474                         mb();
 475                         return;
 476                         break;
 477                 }
 478                 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
 479                 break;
 480         case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
 481                 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
 482                 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
 483                 break;
 484         default:
 485                 cb_idx = 0;
 486                 BUG();
 487         }
 488
 489         /*  Check for (valid) IO callback!  */
 490         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
 491                 MptCallbacks[cb_idx] == NULL) {
 492                 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
 493                                 __func__, ioc->name, cb_idx);
 494                 goto out;
 495         }
 496
 497         if (MptCallbacks[cb_idx](ioc, mf, mr))
 498                 mpt_free_msg_frame(ioc, mf);
 499  out:
 500         mb();
 501 }
 502
 503 static void
 504 mpt_reply(MPT_ADAPTER *ioc, u32 pa)
 505 {
 506         MPT_FRAME_HDR   *mf;
 507         MPT_FRAME_HDR   *mr;
 508         u16              req_idx;
 509         u8               cb_idx;
 510         int              freeme;
 511
 512         u32 reply_dma_low;
 513         u16 ioc_stat;
 514
 515         /* non-TURBO reply!  Hmmm, something may be up...
 516          *  Newest turbo reply mechanism; get address
 517          *  via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
 518          */
 519
 520         /* Map DMA address of reply header to cpu address.
 521          * pa is 32 bits - but the dma address may be 32 or 64 bits
 522          * get offset based only only the low addresses
 523          */
 524
 525         reply_dma_low = (pa <<= 1);
 526         mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
 527                          (reply_dma_low - ioc->reply_frames_low_dma));
 528
 529         req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
 530         cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
 531         mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
 532
 533         dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
 534                         ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
 535         DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
 536
 537          /*  Check/log IOC log info
 538          */
 539         ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
 540         if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
 541                 u32      log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
 542                 if (ioc->bus_type == FC)
 543                         mpt_fc_log_info(ioc, log_info);
 544                 else if (ioc->bus_type == SPI)
 545                         mpt_spi_log_info(ioc, log_info);
 546                 else if (ioc->bus_type == SAS)
 547                         mpt_sas_log_info(ioc, log_info, cb_idx);
 548         }
 549
 550         if (ioc_stat & MPI_IOCSTATUS_MASK)
 551                 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
 552
 553         /*  Check for (valid) IO callback!  */
 554         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
 555                 MptCallbacks[cb_idx] == NULL) {
 556                 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
 557                                 __func__, ioc->name, cb_idx);
 558                 freeme = 0;
 559                 goto out;
 560         }
 561
 562         freeme = MptCallbacks[cb_idx](ioc, mf, mr);
 563
 564  out:
 565         /*  Flush (non-TURBO) reply with a WRITE!  */
 566         CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
 567
 568         if (freeme)
 569                 mpt_free_msg_frame(ioc, mf);
 570         mb();
 571 }
 572
 573 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 574 /**
 575  *      mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
 576  *      @irq: irq number (not used)
 577  *      @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
 578  *
 579  *      This routine is registered via the request_irq() kernel API call,
 580  *      and handles all interrupts generated from a specific MPT adapter
 581  *      (also referred to as a IO Controller or IOC).
 582  *      This routine must clear the interrupt from the adapter and does
 583  *      so by reading the reply FIFO.  Multiple replies may be processed
 584  *      per single call to this routine.
 585  *
 586  *      This routine handles register-level access of the adapter but
 587  *      dispatches (calls) a protocol-specific callback routine to handle
 588  *      the protocol-specific details of the MPT request completion.
 589  */
 590 static irqreturn_t
 591 mpt_interrupt(int irq, void *bus_id)
 592 {
 593         MPT_ADAPTER *ioc = bus_id;
 594         u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
 595
 596         if (pa == 0xFFFFFFFF)
 597                 return IRQ_NONE;
 598
 599         /*
 600          *  Drain the reply FIFO!
 601          */
 602         do {
 603                 if (pa & MPI_ADDRESS_REPLY_A_BIT)
 604                         mpt_reply(ioc, pa);
 605                 else
 606                         mpt_turbo_reply(ioc, pa);
 607                 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
 608         } while (pa != 0xFFFFFFFF);
 609
 610         return IRQ_HANDLED;
 611 }
 612
 613 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 614 /**
 615  *      mptbase_reply - MPT base driver's callback routine
 616  *      @ioc: Pointer to MPT_ADAPTER structure
 617  *      @req: Pointer to original MPT request frame
 618  *      @reply: Pointer to MPT reply frame (NULL if TurboReply)
 619  *
 620  *      MPT base driver's callback routine; all base driver
 621  *      "internal" request/reply processing is routed here.
 622  *      Currently used for EventNotification and EventAck handling.
 623  *
 624  *      Returns 1 indicating original alloc'd request frame ptr
 625  *      should be freed, or 0 if it shouldn't.
 626  */
 627 static int
 628 mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
 629 {
 630         EventNotificationReply_t *pEventReply;
 631         u8 event;
 632         int evHandlers;
 633         int freereq = 1;
 634
 635         switch (reply->u.hdr.Function) {
 636         case MPI_FUNCTION_EVENT_NOTIFICATION:
 637                 pEventReply = (EventNotificationReply_t *)reply;
 638                 evHandlers = 0;
 639                 ProcessEventNotification(ioc, pEventReply, &evHandlers);
 640                 event = le32_to_cpu(pEventReply->Event) & 0xFF;
 641                 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
 642                         freereq = 0;
 643                 if (event != MPI_EVENT_EVENT_CHANGE)
 644                         break;
 645         case MPI_FUNCTION_CONFIG:
 646         case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
 647                 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 648                 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
 649                 memcpy(ioc->mptbase_cmds.reply, reply,
 650                     min(MPT_DEFAULT_FRAME_SIZE,
 651                         4 * reply->u.reply.MsgLength));
 652                 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
 653                         ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
 654                         complete(&ioc->mptbase_cmds.done);
 655                 } else
 656                         freereq = 0;
 657                 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
 658                         freereq = 1;
 659                 break;
 660         case MPI_FUNCTION_EVENT_ACK:
 661                 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 662                     "EventAck reply received\n", ioc->name));
 663                 break;
 664         default:
 665                 printk(MYIOC_s_ERR_FMT
 666                     "Unexpected msg function (=%02Xh) reply received!\n",
 667                     ioc->name, reply->u.hdr.Function);
 668                 break;
 669         }
 670
 671         /*
 672          *      Conditionally tell caller to free the original
 673          *      EventNotification/EventAck/unexpected request frame!
 674          */
 675         return freereq;
 676 }
 677
 678 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 679 /**
 680  *      mpt_register - Register protocol-specific main callback handler.
 681  *      @cbfunc: callback function pointer
 682  *      @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
 683  *      @func_name: call function's name
 684  *
 685  *      This routine is called by a protocol-specific driver (SCSI host,
 686  *      LAN, SCSI target) to register its reply callback routine.  Each
 687  *      protocol-specific driver must do this before it will be able to
 688  *      use any IOC resources, such as obtaining request frames.
 689  *
 690  *      NOTES: The SCSI protocol driver currently calls this routine thrice
 691  *      in order to register separate callbacks; one for "normal" SCSI IO;
 692  *      one for MptScsiTaskMgmt requests; one for Scan/DV requests.
 693  *
 694  *      Returns u8 valued "handle" in the range (and S.O.D. order)
 695  *      {N,...,7,6,5,...,1} if successful.
 696  *      A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
 697  *      considered an error by the caller.
 698  */
 699 u8
 700 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
 701 {
 702         u8 cb_idx;
 703         last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
 704
 705         /*
 706          *  Search for empty callback slot in this order: {N,...,7,6,5,...,1}
 707          *  (slot/handle 0 is reserved!)
 708          */
 709         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
 710                 if (MptCallbacks[cb_idx] == NULL) {
 711                         MptCallbacks[cb_idx] = cbfunc;
 712                         MptDriverClass[cb_idx] = dclass;
 713                         MptEvHandlers[cb_idx] = NULL;
 714                         last_drv_idx = cb_idx;
 715                         strlcpy(MptCallbacksName[cb_idx], func_name,
 716                                 MPT_MAX_CALLBACKNAME_LEN+1);
 717                         break;
 718                 }
 719         }
 720
 721         return last_drv_idx;
 722 }
 723
 724 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 725 /**
 726  *      mpt_deregister - Deregister a protocol drivers resources.
 727  *      @cb_idx: previously registered callback handle
 728  *
 729  *      Each protocol-specific driver should call this routine when its
 730  *      module is unloaded.
 731  */
 732 void
 733 mpt_deregister(u8 cb_idx)
 734 {
 735         if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
 736                 MptCallbacks[cb_idx] = NULL;
 737                 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
 738                 MptEvHandlers[cb_idx] = NULL;
 739
 740                 last_drv_idx++;
 741         }
 742 }
 743
 744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 745 /**
 746  *      mpt_event_register - Register protocol-specific event callback handler.
 747  *      @cb_idx: previously registered (via mpt_register) callback handle
 748  *      @ev_cbfunc: callback function
 749  *
 750  *      This routine can be called by one or more protocol-specific drivers
 751  *      if/when they choose to be notified of MPT events.
 752  *
 753  *      Returns 0 for success.
 754  */
 755 int
 756 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
 757 {
 758         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 759                 return -1;
 760
 761         MptEvHandlers[cb_idx] = ev_cbfunc;
 762         return 0;
 763 }
 764
 765 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 766 /**
 767  *      mpt_event_deregister - Deregister protocol-specific event callback handler
 768  *      @cb_idx: previously registered callback handle
 769  *
 770  *      Each protocol-specific driver should call this routine
 771  *      when it does not (or can no longer) handle events,
 772  *      or when its module is unloaded.
 773  */
 774 void
 775 mpt_event_deregister(u8 cb_idx)
 776 {
 777         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 778                 return;
 779
 780         MptEvHandlers[cb_idx] = NULL;
 781 }
 782
 783 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 784 /**
 785  *      mpt_reset_register - Register protocol-specific IOC reset handler.
 786  *      @cb_idx: previously registered (via mpt_register) callback handle
 787  *      @reset_func: reset function
 788  *
 789  *      This routine can be called by one or more protocol-specific drivers
 790  *      if/when they choose to be notified of IOC resets.
 791  *
 792  *      Returns 0 for success.
 793  */
 794 int
 795 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
 796 {
 797         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 798                 return -1;
 799
 800         MptResetHandlers[cb_idx] = reset_func;
 801         return 0;
 802 }
 803
 804 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 805 /**
 806  *      mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
 807  *      @cb_idx: previously registered callback handle
 808  *
 809  *      Each protocol-specific driver should call this routine
 810  *      when it does not (or can no longer) handle IOC reset handling,
 811  *      or when its module is unloaded.
 812  */
 813 void
 814 mpt_reset_deregister(u8 cb_idx)
 815 {
 816         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 817                 return;
 818
 819         MptResetHandlers[cb_idx] = NULL;
 820 }
 821
 822 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 823 /**
 824  *      mpt_device_driver_register - Register device driver hooks
 825  *      @dd_cbfunc: driver callbacks struct
 826  *      @cb_idx: MPT protocol driver index
 827  */
 828 int
 829 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
 830 {
 831         MPT_ADAPTER     *ioc;
 832         const struct pci_device_id *id;
 833
 834         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 835                 return -EINVAL;
 836
 837         MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
 838
 839         /* call per pci device probe entry point */
 840         list_for_each_entry(ioc, &ioc_list, list) {
 841                 id = ioc->pcidev->driver ?
 842                     ioc->pcidev->driver->id_table : NULL;
 843                 if (dd_cbfunc->probe)
 844                         dd_cbfunc->probe(ioc->pcidev, id);
 845          }
 846
 847         return 0;
 848 }
 849
 850 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 851 /**
 852  *      mpt_device_driver_deregister - DeRegister device driver hooks
 853  *      @cb_idx: MPT protocol driver index
 854  */
 855 void
 856 mpt_device_driver_deregister(u8 cb_idx)
 857 {
 858         struct mpt_pci_driver *dd_cbfunc;
 859         MPT_ADAPTER     *ioc;
 860
 861         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 862                 return;
 863
 864         dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
 865
 866         list_for_each_entry(ioc, &ioc_list, list) {
 867                 if (dd_cbfunc->remove)
 868                         dd_cbfunc->remove(ioc->pcidev);
 869         }
 870
 871         MptDeviceDriverHandlers[cb_idx] = NULL;
 872 }
 873
 874
 875 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 876 /**
 877  *      mpt_get_msg_frame - Obtain an MPT request frame from the pool
 878  *      @cb_idx: Handle of registered MPT protocol driver
 879  *      @ioc: Pointer to MPT adapter structure
 880  *
 881  *      Obtain an MPT request frame from the pool (of 1024) that are
 882  *      allocated per MPT adapter.
 883  *
 884  *      Returns pointer to a MPT request frame or %NULL if none are available
 885  *      or IOC is not active.
 886  */
 887 MPT_FRAME_HDR*
 888 mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
 889 {
 890         MPT_FRAME_HDR *mf;
 891         unsigned long flags;
 892         u16      req_idx;       /* Request index */
 893
 894         /* validate handle and ioc identifier */
 895
 896 #ifdef MFCNT
 897         if (!ioc->active)
 898                 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
 899                     "returning NULL!\n", ioc->name);
 900 #endif
 901
 902         /* If interrupts are not attached, do not return a request frame */
 903         if (!ioc->active)
 904                 return NULL;
 905
 906         spin_lock_irqsave(&ioc->FreeQlock, flags);
 907         if (!list_empty(&ioc->FreeQ)) {
 908                 int req_offset;
 909
 910                 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
 911                                 u.frame.linkage.list);
 912                 list_del(&mf->u.frame.linkage.list);
 913                 mf->u.frame.linkage.arg1 = 0;
 914                 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;  /* byte */
 915                 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
 916                                                                 /* u16! */
 917                 req_idx = req_offset / ioc->req_sz;
 918                 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
 919                 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
 920                 /* Default, will be changed if necessary in SG generation */
 921                 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
 922 #ifdef MFCNT
 923                 ioc->mfcnt++;
 924 #endif
 925         }
 926         else
 927                 mf = NULL;
 928         spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 929
 930 #ifdef MFCNT
 931         if (mf == NULL)
 932                 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
 933                     "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
 934                     ioc->req_depth);
 935         mfcounter++;
 936         if (mfcounter == PRINT_MF_COUNT)
 937                 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
 938                     ioc->mfcnt, ioc->req_depth);
 939 #endif
 940
 941         dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
 942             ioc->name, cb_idx, ioc->id, mf));
 943         return mf;
 944 }
 945
 946 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 947 /**
 948  *      mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
 949  *      @cb_idx: Handle of registered MPT protocol driver
 950  *      @ioc: Pointer to MPT adapter structure
 951  *      @mf: Pointer to MPT request frame
 952  *
 953  *      This routine posts an MPT request frame to the request post FIFO of a
 954  *      specific MPT adapter.
 955  */
 956 void
 957 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 958 {
 959         u32 mf_dma_addr;
 960         int req_offset;
 961         u16      req_idx;       /* Request index */
 962
 963         /* ensure values are reset properly! */
 964         mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;          /* byte */
 965         req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
 966                                                                 /* u16! */
 967         req_idx = req_offset / ioc->req_sz;
 968         mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
 969         mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
 970
 971         DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
 972
 973         mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
 974         dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
 975             "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
 976             ioc->RequestNB[req_idx]));
 977         CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
 978 }
 979
 980 /**
 981  *      mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
 982  *      @cb_idx: Handle of registered MPT protocol driver
 983  *      @ioc: Pointer to MPT adapter structure
 984  *      @mf: Pointer to MPT request frame
 985  *
 986  *      Send a protocol-specific MPT request frame to an IOC using
 987  *      hi-priority request queue.
 988  *
 989  *      This routine posts an MPT request frame to the request post FIFO of a
 990  *      specific MPT adapter.
 991  **/
 992 void
 993 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 994 {
 995         u32 mf_dma_addr;
 996         int req_offset;
 997         u16      req_idx;       /* Request index */
 998
 999         /* ensure values are reset properly! */
1000         mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1001         req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1002         req_idx = req_offset / ioc->req_sz;
1003         mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1004         mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1005
1006         DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1007
1008         mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1009         dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1010                 ioc->name, mf_dma_addr, req_idx));
1011         CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1012 }
1013
1014 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1015 /**
1016  *      mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1017  *      @ioc: Pointer to MPT adapter structure
1018  *      @mf: Pointer to MPT request frame
1019  *
1020  *      This routine places a MPT request frame back on the MPT adapter's
1021  *      FreeQ.
1022  */
1023 void
1024 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1025 {
1026         unsigned long flags;
1027
1028         /*  Put Request back on FreeQ!  */
1029         spin_lock_irqsave(&ioc->FreeQlock, flags);
1030         if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1031                 goto out;
1032         /* signature to know if this mf is freed */
1033         mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1034         list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1035 #ifdef MFCNT
1036         ioc->mfcnt--;
1037 #endif
1038  out:
1039         spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1040 }
1041
1042 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1043 /**
1044  *      mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1045  *      @pAddr: virtual address for SGE
1046  *      @flagslength: SGE flags and data transfer length
1047  *      @dma_addr: Physical address
1048  *
1049  *      This routine places a MPT request frame back on the MPT adapter's
1050  *      FreeQ.
1051  */
1052 static void
1053 mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1054 {
1055         SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1056         pSge->FlagsLength = cpu_to_le32(flagslength);
1057         pSge->Address = cpu_to_le32(dma_addr);
1058 }
1059
1060 /**
1061  *      mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1062  *      @pAddr: virtual address for SGE
1063  *      @flagslength: SGE flags and data transfer length
1064  *      @dma_addr: Physical address
1065  *
1066  *      This routine places a MPT request frame back on the MPT adapter's
1067  *      FreeQ.
1068  **/
1069 static void
1070 mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1071 {
1072         SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1073         pSge->Address.Low = cpu_to_le32
1074                         (lower_32_bits(dma_addr));
1075         pSge->Address.High = cpu_to_le32
1076                         (upper_32_bits(dma_addr));
1077         pSge->FlagsLength = cpu_to_le32
1078                         ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1079 }
1080
1081 /**
1082  *      mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1083  *      @pAddr: virtual address for SGE
1084  *      @flagslength: SGE flags and data transfer length
1085  *      @dma_addr: Physical address
1086  *
1087  *      This routine places a MPT request frame back on the MPT adapter's
1088  *      FreeQ.
1089  **/
1090 static void
1091 mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1092 {
1093         SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1094         u32 tmp;
1095
1096         pSge->Address.Low = cpu_to_le32
1097                         (lower_32_bits(dma_addr));
1098         tmp = (u32)(upper_32_bits(dma_addr));
1099
1100         /*
1101          * 1078 errata workaround for the 36GB limitation
1102          */
1103         if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32)  == 9) {
1104                 flagslength |=
1105                     MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1106                 tmp |= (1<<31);
1107                 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1108                         printk(KERN_DEBUG "1078 P0M2 addressing for "
1109                             "addr = 0x%llx len = %d\n",
1110                             (unsigned long long)dma_addr,
1111                             MPI_SGE_LENGTH(flagslength));
1112         }
1113
1114         pSge->Address.High = cpu_to_le32(tmp);
1115         pSge->FlagsLength = cpu_to_le32(
1116                 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1117 }
1118
1119 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1120 /**
1121  *      mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1122  *      @pAddr: virtual address for SGE
1123  *      @next: nextChainOffset value (u32's)
1124  *      @length: length of next SGL segment
1125  *      @dma_addr: Physical address
1126  *
1127  */
1128 static void
1129 mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1130 {
1131                 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1132                 pChain->Length = cpu_to_le16(length);
1133                 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1134                 pChain->NextChainOffset = next;
1135                 pChain->Address = cpu_to_le32(dma_addr);
1136 }
1137
1138 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1139 /**
1140  *      mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1141  *      @pAddr: virtual address for SGE
1142  *      @next: nextChainOffset value (u32's)
1143  *      @length: length of next SGL segment
1144  *      @dma_addr: Physical address
1145  *
1146  */
1147 static void
1148 mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1149 {
1150                 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1151                 u32 tmp = dma_addr & 0xFFFFFFFF;
1152
1153                 pChain->Length = cpu_to_le16(length);
1154                 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1155                                  MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1156
1157                 pChain->NextChainOffset = next;
1158
1159                 pChain->Address.Low = cpu_to_le32(tmp);
1160                 tmp = (u32)(upper_32_bits(dma_addr));
1161                 pChain->Address.High = cpu_to_le32(tmp);
1162 }
1163
1164 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1165 /**
1166  *      mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1167  *      @cb_idx: Handle of registered MPT protocol driver
1168  *      @ioc: Pointer to MPT adapter structure
1169  *      @reqBytes: Size of the request in bytes
1170  *      @req: Pointer to MPT request frame
1171  *      @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1172  *
1173  *      This routine is used exclusively to send MptScsiTaskMgmt
1174  *      requests since they are required to be sent via doorbell handshake.
1175  *
1176  *      NOTE: It is the callers responsibility to byte-swap fields in the
1177  *      request which are greater than 1 byte in size.
1178  *
1179  *      Returns 0 for success, non-zero for failure.
1180  */
1181 int
1182 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1183 {
1184         int     r = 0;
1185         u8      *req_as_bytes;
1186         int      ii;
1187
1188         /* State is known to be good upon entering
1189          * this function so issue the bus reset
1190          * request.
1191          */
1192
1193         /*
1194          * Emulate what mpt_put_msg_frame() does /wrt to sanity
1195          * setting cb_idx/req_idx.  But ONLY if this request
1196          * is in proper (pre-alloc'd) request buffer range...
1197          */
1198         ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1199         if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1200                 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1201                 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1202                 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1203         }
1204
1205         /* Make sure there are no doorbells */
1206         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1207
1208         CHIPREG_WRITE32(&ioc->chip->Doorbell,
1209                         ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1210                          ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1211
1212         /* Wait for IOC doorbell int */
1213         if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1214                 return ii;
1215         }
1216
1217         /* Read doorbell and check for active bit */
1218         if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1219                 return -5;
1220
1221         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1222                 ioc->name, ii));
1223
1224         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1225
1226         if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1227                 return -2;
1228         }
1229
1230         /* Send request via doorbell handshake */
1231         req_as_bytes = (u8 *) req;
1232         for (ii = 0; ii < reqBytes/4; ii++) {
1233                 u32 word;
1234
1235                 word = ((req_as_bytes[(ii*4) + 0] <<  0) |
1236                         (req_as_bytes[(ii*4) + 1] <<  8) |
1237                         (req_as_bytes[(ii*4) + 2] << 16) |
1238                         (req_as_bytes[(ii*4) + 3] << 24));
1239                 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1240                 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1241                         r = -3;
1242                         break;
1243                 }
1244         }
1245
1246         if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1247                 r = 0;
1248         else
1249                 r = -4;
1250
1251         /* Make sure there are no doorbells */
1252         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1253
1254         return r;
1255 }
1256
1257 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1258 /**
1259  * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1260  * @ioc: Pointer to MPT adapter structure
1261  * @access_control_value: define bits below
1262  * @sleepFlag: Specifies whether the process can sleep
1263  *
1264  * Provides mechanism for the host driver to control the IOC's
1265  * Host Page Buffer access.
1266  *
1267  * Access Control Value - bits[15:12]
1268  * 0h Reserved
1269  * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1270  * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1271  * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1272  *
1273  * Returns 0 for success, non-zero for failure.
1274  */
1275
1276 static int
1277 mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1278 {
1279         int      r = 0;
1280
1281         /* return if in use */
1282         if (CHIPREG_READ32(&ioc->chip->Doorbell)
1283             & MPI_DOORBELL_ACTIVE)
1284             return -1;
1285
1286         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1287
1288         CHIPREG_WRITE32(&ioc->chip->Doorbell,
1289                 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1290                  <<MPI_DOORBELL_FUNCTION_SHIFT) |
1291                  (access_control_value<<12)));
1292
1293         /* Wait for IOC to clear Doorbell Status bit */
1294         if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1295                 return -2;
1296         }else
1297                 return 0;
1298 }
1299
1300 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1301 /**
1302  *      mpt_host_page_alloc - allocate system memory for the fw
1303  *      @ioc: Pointer to pointer to IOC adapter
1304  *      @ioc_init: Pointer to ioc init config page
1305  *
1306  *      If we already allocated memory in past, then resend the same pointer.
1307  *      Returns 0 for success, non-zero for failure.
1308  */
1309 static int
1310 mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1311 {
1312         char    *psge;
1313         int     flags_length;
1314         u32     host_page_buffer_sz=0;
1315
1316         if(!ioc->HostPageBuffer) {
1317
1318                 host_page_buffer_sz =
1319                     le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1320
1321                 if(!host_page_buffer_sz)
1322                         return 0; /* fw doesn't need any host buffers */
1323
1324                 /* spin till we get enough memory */
1325                 while(host_page_buffer_sz > 0) {
1326
1327                         if((ioc->HostPageBuffer = pci_alloc_consistent(
1328                             ioc->pcidev,
1329                             host_page_buffer_sz,
1330                             &ioc->HostPageBuffer_dma)) != NULL) {
1331
1332                                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1333                                     "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1334                                     ioc->name, ioc->HostPageBuffer,
1335                                     (u32)ioc->HostPageBuffer_dma,
1336                                     host_page_buffer_sz));
1337                                 ioc->alloc_total += host_page_buffer_sz;
1338                                 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1339                                 break;
1340                         }
1341
1342                         host_page_buffer_sz -= (4*1024);
1343                 }
1344         }
1345
1346         if(!ioc->HostPageBuffer) {
1347                 printk(MYIOC_s_ERR_FMT
1348                     "Failed to alloc memory for host_page_buffer!\n",
1349                     ioc->name);
1350                 return -999;
1351         }
1352
1353         psge = (char *)&ioc_init->HostPageBufferSGE;
1354         flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1355             MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1356             MPI_SGE_FLAGS_HOST_TO_IOC |
1357             MPI_SGE_FLAGS_END_OF_BUFFER;
1358         flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1359         flags_length |= ioc->HostPageBuffer_sz;
1360         ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1361         ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1362
1363 return 0;
1364 }
1365
1366 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1367 /**
1368  *      mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1369  *      @iocid: IOC unique identifier (integer)
1370  *      @iocpp: Pointer to pointer to IOC adapter
1371  *
1372  *      Given a unique IOC identifier, set pointer to the associated MPT
1373  *      adapter structure.
1374  *
1375  *      Returns iocid and sets iocpp if iocid is found.
1376  *      Returns -1 if iocid is not found.
1377  */
1378 int
1379 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1380 {
1381         MPT_ADAPTER *ioc;
1382
1383         list_for_each_entry(ioc,&ioc_list,list) {
1384                 if (ioc->id == iocid) {
1385                         *iocpp =ioc;
1386                         return iocid;
1387                 }
1388         }
1389
1390         *iocpp = NULL;
1391         return -1;
1392 }
1393
1394 /**
1395  *      mpt_get_product_name - returns product string
1396  *      @vendor: pci vendor id
1397  *      @device: pci device id
1398  *      @revision: pci revision id
1399  *
1400  *      Returns product string displayed when driver loads,
1401  *      in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1402  *
1403  **/
1404 static const char*
1405 mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1406 {
1407         char *product_str = NULL;
1408
1409         if (vendor == PCI_VENDOR_ID_BROCADE) {
1410                 switch (device)
1411                 {
1412                 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1413                         switch (revision)
1414                         {
1415                         case 0x00:
1416                                 product_str = "BRE040 A0";
1417                                 break;
1418                         case 0x01:
1419                                 product_str = "BRE040 A1";
1420                                 break;
1421                         default:
1422                                 product_str = "BRE040";
1423                                 break;
1424                         }
1425                         break;
1426                 }
1427                 goto out;
1428         }
1429
1430         switch (device)
1431         {
1432         case MPI_MANUFACTPAGE_DEVICEID_FC909:
1433                 product_str = "LSIFC909 B1";
1434                 break;
1435         case MPI_MANUFACTPAGE_DEVICEID_FC919:
1436                 product_str = "LSIFC919 B0";
1437                 break;
1438         case MPI_MANUFACTPAGE_DEVICEID_FC929:
1439                 product_str = "LSIFC929 B0";
1440                 break;
1441         case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1442                 if (revision < 0x80)
1443                         product_str = "LSIFC919X A0";
1444                 else
1445                         product_str = "LSIFC919XL A1";
1446                 break;
1447         case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1448                 if (revision < 0x80)
1449                         product_str = "LSIFC929X A0";
1450                 else
1451                         product_str = "LSIFC929XL A1";
1452                 break;
1453         case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1454                 product_str = "LSIFC939X A1";
1455                 break;
1456         case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1457                 product_str = "LSIFC949X A1";
1458                 break;
1459         case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1460                 switch (revision)
1461                 {
1462                 case 0x00:
1463                         product_str = "LSIFC949E A0";
1464                         break;
1465                 case 0x01:
1466                         product_str = "LSIFC949E A1";
1467                         break;
1468                 default:
1469                         product_str = "LSIFC949E";
1470                         break;
1471                 }
1472                 break;
1473         case MPI_MANUFACTPAGE_DEVID_53C1030:
1474                 switch (revision)
1475                 {
1476                 case 0x00:
1477                         product_str = "LSI53C1030 A0";
1478                         break;
1479                 case 0x01:
1480                         product_str = "LSI53C1030 B0";
1481                         break;
1482                 case 0x03:
1483                         product_str = "LSI53C1030 B1";
1484                         break;
1485                 case 0x07:
1486                         product_str = "LSI53C1030 B2";
1487                         break;
1488                 case 0x08:
1489                         product_str = "LSI53C1030 C0";
1490                         break;
1491                 case 0x80:
1492                         product_str = "LSI53C1030T A0";
1493                         break;
1494                 case 0x83:
1495                         product_str = "LSI53C1030T A2";
1496                         break;
1497                 case 0x87:
1498                         product_str = "LSI53C1030T A3";
1499                         break;
1500                 case 0xc1:
1501                         product_str = "LSI53C1020A A1";
1502                         break;
1503                 default:
1504                         product_str = "LSI53C1030";
1505                         break;
1506                 }
1507                 break;
1508         case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1509                 switch (revision)
1510                 {
1511                 case 0x03:
1512                         product_str = "LSI53C1035 A2";
1513                         break;
1514                 case 0x04:
1515                         product_str = "LSI53C1035 B0";
1516                         break;
1517                 default:
1518                         product_str = "LSI53C1035";
1519                         break;
1520                 }
1521                 break;
1522         case MPI_MANUFACTPAGE_DEVID_SAS1064:
1523                 switch (revision)
1524                 {
1525                 case 0x00:
1526                         product_str = "LSISAS1064 A1";
1527                         break;
1528                 case 0x01:
1529                         product_str = "LSISAS1064 A2";
1530                         break;
1531                 case 0x02:
1532                         product_str = "LSISAS1064 A3";
1533                         break;
1534                 case 0x03:
1535                         product_str = "LSISAS1064 A4";
1536                         break;
1537                 default:
1538                         product_str = "LSISAS1064";
1539                         break;
1540                 }
1541                 break;
1542         case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1543                 switch (revision)
1544                 {
1545                 case 0x00:
1546                         product_str = "LSISAS1064E A0";
1547                         break;
1548                 case 0x01:
1549                         product_str = "LSISAS1064E B0";
1550                         break;
1551                 case 0x02:
1552                         product_str = "LSISAS1064E B1";
1553                         break;
1554                 case 0x04:
1555                         product_str = "LSISAS1064E B2";
1556                         break;
1557                 case 0x08:
1558                         product_str = "LSISAS1064E B3";
1559                         break;
1560                 default:
1561                         product_str = "LSISAS1064E";
1562                         break;
1563                 }
1564                 break;
1565         case MPI_MANUFACTPAGE_DEVID_SAS1068:
1566                 switch (revision)
1567                 {
1568                 case 0x00:
1569                         product_str = "LSISAS1068 A0";
1570                         break;
1571                 case 0x01:
1572                         product_str = "LSISAS1068 B0";
1573                         break;
1574                 case 0x02:
1575                         product_str = "LSISAS1068 B1";
1576                         break;
1577                 default:
1578                         product_str = "LSISAS1068";
1579                         break;
1580                 }
1581                 break;
1582         case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1583                 switch (revision)
1584                 {
1585                 case 0x00:
1586                         product_str = "LSISAS1068E A0";
1587                         break;
1588                 case 0x01:
1589                         product_str = "LSISAS1068E B0";
1590                         break;
1591                 case 0x02:
1592                         product_str = "LSISAS1068E B1";
1593                         break;
1594                 case 0x04:
1595                         product_str = "LSISAS1068E B2";
1596                         break;
1597                 case 0x08:
1598                         product_str = "LSISAS1068E B3";
1599                         break;
1600                 default:
1601                         product_str = "LSISAS1068E";
1602                         break;
1603                 }
1604                 break;
1605         case MPI_MANUFACTPAGE_DEVID_SAS1078:
1606                 switch (revision)
1607                 {
1608                 case 0x00:
1609                         product_str = "LSISAS1078 A0";
1610                         break;
1611                 case 0x01:
1612                         product_str = "LSISAS1078 B0";
1613                         break;
1614                 case 0x02:
1615                         product_str = "LSISAS1078 C0";
1616                         break;
1617                 case 0x03:
1618                         product_str = "LSISAS1078 C1";
1619                         break;
1620                 case 0x04:
1621                         product_str = "LSISAS1078 C2";
1622                         break;
1623                 default:
1624                         product_str = "LSISAS1078";
1625                         break;
1626                 }
1627                 break;
1628         }
1629
1630  out:
1631         return product_str;
1632 }
1633
1634 /**
1635  *      mpt_mapresources - map in memory mapped io
1636  *      @ioc: Pointer to pointer to IOC adapter
1637  *
1638  **/
1639 static int
1640 mpt_mapresources(MPT_ADAPTER *ioc)
1641 {
1642         u8              __iomem *mem;
1643         int              ii;
1644         resource_size_t  mem_phys;
1645         unsigned long    port;
1646         u32              msize;
1647         u32              psize;
1648         int              r = -ENODEV;
1649         struct pci_dev *pdev;
1650
1651         pdev = ioc->pcidev;
1652         ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1653         if (pci_enable_device_mem(pdev)) {
1654                 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1655                     "failed\n", ioc->name);
1656                 return r;
1657         }
1658         if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1659                 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1660                     "MEM failed\n", ioc->name);
1661                 goto out_pci_disable_device;
1662         }
1663
1664         if (sizeof(dma_addr_t) > 4) {
1665                 const uint64_t required_mask = dma_get_required_mask
1666                     (&pdev->dev);
1667                 if (required_mask > DMA_BIT_MASK(32)
1668                         && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1669                         && !pci_set_consistent_dma_mask(pdev,
1670                                                  DMA_BIT_MASK(64))) {
1671                         ioc->dma_mask = DMA_BIT_MASK(64);
1672                         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1673                                 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1674                                 ioc->name));
1675                 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1676                         && !pci_set_consistent_dma_mask(pdev,
1677                                                 DMA_BIT_MASK(32))) {
1678                         ioc->dma_mask = DMA_BIT_MASK(32);
1679                         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1680                                 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1681                                 ioc->name));
1682                 } else {
1683                         printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1684                             ioc->name, pci_name(pdev));
1685                         goto out_pci_release_region;
1686                 }
1687         } else {
1688                 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1689                         && !pci_set_consistent_dma_mask(pdev,
1690                                                 DMA_BIT_MASK(32))) {
1691                         ioc->dma_mask = DMA_BIT_MASK(32);
1692                         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1693                                 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1694                                 ioc->name));
1695                 } else {
1696                         printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1697                             ioc->name, pci_name(pdev));
1698                         goto out_pci_release_region;
1699                 }
1700         }
1701
1702         mem_phys = msize = 0;
1703         port = psize = 0;
1704         for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1705                 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1706                         if (psize)
1707                                 continue;
1708                         /* Get I/O space! */
1709                         port = pci_resource_start(pdev, ii);
1710                         psize = pci_resource_len(pdev, ii);
1711                 } else {
1712                         if (msize)
1713                                 continue;
1714                         /* Get memmap */
1715                         mem_phys = pci_resource_start(pdev, ii);
1716                         msize = pci_resource_len(pdev, ii);
1717                 }
1718         }
1719         ioc->mem_size = msize;
1720
1721         mem = NULL;
1722         /* Get logical ptr for PciMem0 space */
1723         /*mem = ioremap(mem_phys, msize);*/
1724         mem = ioremap(mem_phys, msize);
1725         if (mem == NULL) {
1726                 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1727                         " memory!\n", ioc->name);
1728                 r = -EINVAL;
1729                 goto out_pci_release_region;
1730         }
1731         ioc->memmap = mem;
1732         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1733             ioc->name, mem, (unsigned long long)mem_phys));
1734
1735         ioc->mem_phys = mem_phys;
1736         ioc->chip = (SYSIF_REGS __iomem *)mem;
1737
1738         /* Save Port IO values in case we need to do downloadboot */
1739         ioc->pio_mem_phys = port;
1740         ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1741
1742         return 0;
1743
1744 out_pci_release_region:
1745         pci_release_selected_regions(pdev, ioc->bars);
1746 out_pci_disable_device:
1747         pci_disable_device(pdev);
1748         return r;
1749 }
1750
1751 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1752 /**
1753  *      mpt_attach - Install a PCI intelligent MPT adapter.
1754  *      @pdev: Pointer to pci_dev structure
1755  *      @id: PCI device ID information
1756  *
1757  *      This routine performs all the steps necessary to bring the IOC of
1758  *      a MPT adapter to a OPERATIONAL state.  This includes registering
1759  *      memory regions, registering the interrupt, and allocating request
1760  *      and reply memory pools.
1761  *
1762  *      This routine also pre-fetches the LAN MAC address of a Fibre Channel
1763  *      MPT adapter.
1764  *
1765  *      Returns 0 for success, non-zero for failure.
1766  *
1767  *      TODO: Add support for polled controllers
1768  */
1769 int
1770 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1771 {
1772         MPT_ADAPTER     *ioc;
1773         u8               cb_idx;
1774         int              r = -ENODEV;
1775         u8               pcixcmd;
1776         static int       mpt_ids = 0;
1777 #ifdef CONFIG_PROC_FS
1778         struct proc_dir_entry *dent;
1779 #endif
1780
1781         ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
1782         if (ioc == NULL) {
1783                 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1784                 return -ENOMEM;
1785         }
1786
1787         ioc->id = mpt_ids++;
1788         sprintf(ioc->name, "ioc%d", ioc->id);
1789         dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1790
1791         /*
1792          * set initial debug level
1793          * (refer to mptdebug.h)
1794          *
1795          */
1796         ioc->debug_level = mpt_debug_level;
1797         if (mpt_debug_level)
1798                 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1799
1800         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1801
1802         ioc->pcidev = pdev;
1803         if (mpt_mapresources(ioc)) {
1804                 goto out_free_ioc;
1805         }
1806
1807         /*
1808          * Setting up proper handlers for scatter gather handling
1809          */
1810         if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1811                 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1812                         ioc->add_sge = &mpt_add_sge_64bit_1078;
1813                 else
1814                         ioc->add_sge = &mpt_add_sge_64bit;
1815                 ioc->add_chain = &mpt_add_chain_64bit;
1816                 ioc->sg_addr_size = 8;
1817         } else {
1818                 ioc->add_sge = &mpt_add_sge;
1819                 ioc->add_chain = &mpt_add_chain;
1820                 ioc->sg_addr_size = 4;
1821         }
1822         ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1823
1824         ioc->alloc_total = sizeof(MPT_ADAPTER);
1825         ioc->req_sz = MPT_DEFAULT_FRAME_SIZE;           /* avoid div by zero! */
1826         ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1827
1828
1829         spin_lock_init(&ioc->taskmgmt_lock);
1830         mutex_init(&ioc->internal_cmds.mutex);
1831         init_completion(&ioc->internal_cmds.done);
1832         mutex_init(&ioc->mptbase_cmds.mutex);
1833         init_completion(&ioc->mptbase_cmds.done);
1834         mutex_init(&ioc->taskmgmt_cmds.mutex);
1835         init_completion(&ioc->taskmgmt_cmds.done);
1836
1837         /* Initialize the event logging.
1838          */
1839         ioc->eventTypes = 0;    /* None */
1840         ioc->eventContext = 0;
1841         ioc->eventLogSize = 0;
1842         ioc->events = NULL;
1843
1844 #ifdef MFCNT
1845         ioc->mfcnt = 0;
1846 #endif
1847
1848         ioc->sh = NULL;
1849         ioc->cached_fw = NULL;
1850
1851         /* Initialize SCSI Config Data structure
1852          */
1853         memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1854
1855         /* Initialize the fc rport list head.
1856          */
1857         INIT_LIST_HEAD(&ioc->fc_rports);
1858
1859         /* Find lookup slot. */
1860         INIT_LIST_HEAD(&ioc->list);
1861
1862
1863         /* Initialize workqueue */
1864         INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1865
1866         snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1867                  "mpt_poll_%d", ioc->id);
1868         ioc->reset_work_q = alloc_workqueue(ioc->reset_work_q_name,
1869                                             WQ_MEM_RECLAIM, 0);
1870         if (!ioc->reset_work_q) {
1871                 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1872                     ioc->name);
1873                 r = -ENOMEM;
1874                 goto out_unmap_resources;
1875         }
1876
1877         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1878             ioc->name, &ioc->facts, &ioc->pfacts[0]));
1879
1880         ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1881                                               pdev->revision);
1882
1883         switch (pdev->device)
1884         {
1885         case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1886         case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1887                 ioc->errata_flag_1064 = 1;
1888         case MPI_MANUFACTPAGE_DEVICEID_FC909:
1889         case MPI_MANUFACTPAGE_DEVICEID_FC929:
1890         case MPI_MANUFACTPAGE_DEVICEID_FC919:
1891         case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1892                 ioc->bus_type = FC;
1893                 break;
1894
1895         case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1896                 if (pdev->revision < XL_929) {
1897                         /* 929X Chip Fix. Set Split transactions level
1898                         * for PCIX. Set MOST bits to zero.
1899                         */
1900                         pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1901                         pcixcmd &= 0x8F;
1902                         pci_write_config_byte(pdev, 0x6a, pcixcmd);
1903                 } else {
1904                         /* 929XL Chip Fix. Set MMRBC to 0x08.
1905                         */
1906                         pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1907                         pcixcmd |= 0x08;
1908                         pci_write_config_byte(pdev, 0x6a, pcixcmd);
1909                 }
1910                 ioc->bus_type = FC;
1911                 break;
1912
1913         case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1914                 /* 919X Chip Fix. Set Split transactions level
1915                  * for PCIX. Set MOST bits to zero.
1916                  */
1917                 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1918                 pcixcmd &= 0x8F;
1919                 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1920                 ioc->bus_type = FC;
1921                 break;
1922
1923         case MPI_MANUFACTPAGE_DEVID_53C1030:
1924                 /* 1030 Chip Fix. Disable Split transactions
1925                  * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1926                  */
1927                 if (pdev->revision < C0_1030) {
1928                         pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1929                         pcixcmd &= 0x8F;
1930                         pci_write_config_byte(pdev, 0x6a, pcixcmd);
1931                 }
1932
1933         case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1934                 ioc->bus_type = SPI;
1935                 break;
1936
1937         case MPI_MANUFACTPAGE_DEVID_SAS1064:
1938         case MPI_MANUFACTPAGE_DEVID_SAS1068:
1939                 ioc->errata_flag_1064 = 1;
1940                 ioc->bus_type = SAS;
1941                 break;
1942
1943         case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1944         case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1945         case MPI_MANUFACTPAGE_DEVID_SAS1078:
1946                 ioc->bus_type = SAS;
1947                 break;
1948         }
1949
1950
1951         switch (ioc->bus_type) {
1952
1953         case SAS:
1954                 ioc->msi_enable = mpt_msi_enable_sas;
1955                 break;
1956
1957         case SPI:
1958                 ioc->msi_enable = mpt_msi_enable_spi;
1959                 break;
1960
1961         case FC:
1962                 ioc->msi_enable = mpt_msi_enable_fc;
1963                 break;
1964
1965         default:
1966                 ioc->msi_enable = 0;
1967                 break;
1968         }
1969
1970         ioc->fw_events_off = 1;
1971
1972         if (ioc->errata_flag_1064)
1973                 pci_disable_io_access(pdev);
1974
1975         spin_lock_init(&ioc->FreeQlock);
1976
1977         /* Disable all! */
1978         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1979         ioc->active = 0;
1980         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1981
1982         /* Set IOC ptr in the pcidev's driver data. */
1983         pci_set_drvdata(ioc->pcidev, ioc);
1984
1985         /* Set lookup ptr. */
1986         list_add_tail(&ioc->list, &ioc_list);
1987
1988         /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1989          */
1990         mpt_detect_bound_ports(ioc, pdev);
1991
1992         INIT_LIST_HEAD(&ioc->fw_event_list);
1993         spin_lock_init(&ioc->fw_event_lock);
1994         snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
1995         ioc->fw_event_q = alloc_workqueue(ioc->fw_event_q_name,
1996                                           WQ_MEM_RECLAIM, 0);
1997         if (!ioc->fw_event_q) {
1998                 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1999                     ioc->name);
2000                 r = -ENOMEM;
2001                 goto out_remove_ioc;
2002         }
2003
2004         if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2005             CAN_SLEEP)) != 0){
2006                 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2007                     ioc->name, r);
2008
2009                 destroy_workqueue(ioc->fw_event_q);
2010                 ioc->fw_event_q = NULL;
2011
2012                 list_del(&ioc->list);
2013                 if (ioc->alt_ioc)
2014                         ioc->alt_ioc->alt_ioc = NULL;
2015                 iounmap(ioc->memmap);
2016                 if (pci_is_enabled(pdev))
2017                         pci_disable_device(pdev);
2018                 if (r != -5)
2019                         pci_release_selected_regions(pdev, ioc->bars);
2020
2021                 destroy_workqueue(ioc->reset_work_q);
2022                 ioc->reset_work_q = NULL;
2023
2024                 kfree(ioc);
2025                 return r;
2026         }
2027
2028         /* call per device driver probe entry point */
2029         for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2030                 if(MptDeviceDriverHandlers[cb_idx] &&
2031                   MptDeviceDriverHandlers[cb_idx]->probe) {
2032                         MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2033                 }
2034         }
2035
2036 #ifdef CONFIG_PROC_FS
2037         /*
2038          *  Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2039          */
2040         dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2041         if (dent) {
2042                 proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
2043                 proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
2044         }
2045 #endif
2046
2047         if (!ioc->alt_ioc)
2048                 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2049                         msecs_to_jiffies(MPT_POLLING_INTERVAL));
2050
2051         return 0;
2052
2053 out_remove_ioc:
2054         list_del(&ioc->list);
2055         if (ioc->alt_ioc)
2056                 ioc->alt_ioc->alt_ioc = NULL;
2057
2058         destroy_workqueue(ioc->reset_work_q);
2059         ioc->reset_work_q = NULL;
2060
2061 out_unmap_resources:
2062         iounmap(ioc->memmap);
2063         pci_disable_device(pdev);
2064         pci_release_selected_regions(pdev, ioc->bars);
2065
2066 out_free_ioc:
2067         kfree(ioc);
2068
2069         return r;
2070 }
2071
2072 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2073 /**
2074  *      mpt_detach - Remove a PCI intelligent MPT adapter.
2075  *      @pdev: Pointer to pci_dev structure
2076  */
2077
2078 void
2079 mpt_detach(struct pci_dev *pdev)
2080 {
2081         MPT_ADAPTER     *ioc = pci_get_drvdata(pdev);
2082         char pname[32];
2083         u8 cb_idx;
2084         unsigned long flags;
2085         struct workqueue_struct *wq;
2086
2087         /*
2088          * Stop polling ioc for fault condition
2089          */
2090         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2091         wq = ioc->reset_work_q;
2092         ioc->reset_work_q = NULL;
2093         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2094         cancel_delayed_work(&ioc->fault_reset_work);
2095         destroy_workqueue(wq);
2096
2097         spin_lock_irqsave(&ioc->fw_event_lock, flags);
2098         wq = ioc->fw_event_q;
2099         ioc->fw_event_q = NULL;
2100         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2101         destroy_workqueue(wq);
2102
2103         sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2104         remove_proc_entry(pname, NULL);
2105         sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2106         remove_proc_entry(pname, NULL);
2107         sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2108         remove_proc_entry(pname, NULL);
2109
2110         /* call per device driver remove entry point */
2111         for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2112                 if(MptDeviceDriverHandlers[cb_idx] &&
2113                   MptDeviceDriverHandlers[cb_idx]->remove) {
2114                         MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2115                 }
2116         }
2117
2118         /* Disable interrupts! */
2119         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2120
2121         ioc->active = 0;
2122         synchronize_irq(pdev->irq);
2123
2124         /* Clear any lingering interrupt */
2125         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2126
2127         CHIPREG_READ32(&ioc->chip->IntStatus);
2128
2129         mpt_adapter_dispose(ioc);
2130
2131 }
2132
2133 /**************************************************************************
2134  * Power Management
2135  */
2136 #ifdef CONFIG_PM
2137 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2138 /**
2139  *      mpt_suspend - Fusion MPT base driver suspend routine.
2140  *      @pdev: Pointer to pci_dev structure
2141  *      @state: new state to enter
2142  */
2143 int
2144 mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2145 {
2146         u32 device_state;
2147         MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2148
2149         device_state = pci_choose_state(pdev, state);
2150         printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2151             "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2152             device_state);
2153
2154         /* put ioc into READY_STATE */
2155         if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2156                 printk(MYIOC_s_ERR_FMT
2157                 "pci-suspend:  IOC msg unit reset failed!\n", ioc->name);
2158         }
2159
2160         /* disable interrupts */
2161         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2162         ioc->active = 0;
2163
2164         /* Clear any lingering interrupt */
2165         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2166
2167         free_irq(ioc->pci_irq, ioc);
2168         if (ioc->msi_enable)
2169                 pci_disable_msi(ioc->pcidev);
2170         ioc->pci_irq = -1;
2171         pci_save_state(pdev);
2172         pci_disable_device(pdev);
2173         pci_release_selected_regions(pdev, ioc->bars);
2174         pci_set_power_state(pdev, device_state);
2175         return 0;
2176 }
2177
2178 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2179 /**
2180  *      mpt_resume - Fusion MPT base driver resume routine.
2181  *      @pdev: Pointer to pci_dev structure
2182  */
2183 int
2184 mpt_resume(struct pci_dev *pdev)
2185 {
2186         MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2187         u32 device_state = pdev->current_state;
2188         int recovery_state;
2189         int err;
2190
2191         printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2192             "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2193             device_state);
2194
2195         pci_set_power_state(pdev, PCI_D0);
2196         pci_enable_wake(pdev, PCI_D0, 0);
2197         pci_restore_state(pdev);
2198         ioc->pcidev = pdev;
2199         err = mpt_mapresources(ioc);
2200         if (err)
2201                 return err;
2202
2203         if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2204                 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2205                         ioc->add_sge = &mpt_add_sge_64bit_1078;
2206                 else
2207                         ioc->add_sge = &mpt_add_sge_64bit;
2208                 ioc->add_chain = &mpt_add_chain_64bit;
2209                 ioc->sg_addr_size = 8;
2210         } else {
2211
2212                 ioc->add_sge = &mpt_add_sge;
2213                 ioc->add_chain = &mpt_add_chain;
2214                 ioc->sg_addr_size = 4;
2215         }
2216         ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2217
2218         printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2219             ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2220             CHIPREG_READ32(&ioc->chip->Doorbell));
2221
2222         /*
2223          * Errata workaround for SAS pci express:
2224          * Upon returning to the D0 state, the contents of the doorbell will be
2225          * stale data, and this will incorrectly signal to the host driver that
2226          * the firmware is ready to process mpt commands.   The workaround is
2227          * to issue a diagnostic reset.
2228          */
2229         if (ioc->bus_type == SAS && (pdev->device ==
2230             MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2231             MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2232                 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2233                         printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2234                             ioc->name);
2235                         goto out;
2236                 }
2237         }
2238
2239         /* bring ioc to operational state */
2240         printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2241         recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2242                                                  CAN_SLEEP);
2243         if (recovery_state != 0)
2244                 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2245                     "error:[%x]\n", ioc->name, recovery_state);
2246         else
2247                 printk(MYIOC_s_INFO_FMT
2248                     "pci-resume: success\n", ioc->name);
2249  out:
2250         return 0;
2251
2252 }
2253 #endif
2254
2255 static int
2256 mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2257 {
2258         if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2259              ioc->bus_type != SPI) ||
2260             (MptDriverClass[index] == MPTFC_DRIVER &&
2261              ioc->bus_type != FC) ||
2262             (MptDriverClass[index] == MPTSAS_DRIVER &&
2263              ioc->bus_type != SAS))
2264                 /* make sure we only call the relevant reset handler
2265                  * for the bus */
2266                 return 0;
2267         return (MptResetHandlers[index])(ioc, reset_phase);
2268 }
2269
2270 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2271 /**
2272  *      mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2273  *      @ioc: Pointer to MPT adapter structure
2274  *      @reason: Event word / reason
2275  *      @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2276  *
2277  *      This routine performs all the steps necessary to bring the IOC
2278  *      to a OPERATIONAL state.
2279  *
2280  *      This routine also pre-fetches the LAN MAC address of a Fibre Channel
2281  *      MPT adapter.
2282  *
2283  *      Returns:
2284  *               0 for success
2285  *              -1 if failed to get board READY
2286  *              -2 if READY but IOCFacts Failed
2287  *              -3 if READY but PrimeIOCFifos Failed
2288  *              -4 if READY but IOCInit Failed
2289  *              -5 if failed to enable_device and/or request_selected_regions
2290  *              -6 if failed to upload firmware
2291  */
2292 static int
2293 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2294 {
2295         int      hard_reset_done = 0;
2296         int      alt_ioc_ready = 0;
2297         int      hard;
2298         int      rc=0;
2299         int      ii;
2300         int      ret = 0;
2301         int      reset_alt_ioc_active = 0;
2302         int      irq_allocated = 0;
2303         u8      *a;
2304
2305         printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2306             reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2307
2308         /* Disable reply interrupts (also blocks FreeQ) */
2309         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2310         ioc->active = 0;
2311
2312         if (ioc->alt_ioc) {
2313                 if (ioc->alt_ioc->active ||
2314                     reason == MPT_HOSTEVENT_IOC_RECOVER) {
2315                         reset_alt_ioc_active = 1;
2316                         /* Disable alt-IOC's reply interrupts
2317                          *  (and FreeQ) for a bit
2318                          **/
2319                         CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2320                                 0xFFFFFFFF);
2321                         ioc->alt_ioc->active = 0;
2322                 }
2323         }
2324
2325         hard = 1;
2326         if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2327                 hard = 0;
2328
2329         if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2330                 if (hard_reset_done == -4) {
2331                         printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2332                             ioc->name);
2333
2334                         if (reset_alt_ioc_active && ioc->alt_ioc) {
2335                                 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2336                                 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2337                                     "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2338                                 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2339                                 ioc->alt_ioc->active = 1;
2340                         }
2341
2342                 } else {
2343                         printk(MYIOC_s_WARN_FMT
2344                             "NOT READY WARNING!\n", ioc->name);
2345                 }
2346                 ret = -1;
2347                 goto out;
2348         }
2349
2350         /* hard_reset_done = 0 if a soft reset was performed
2351          * and 1 if a hard reset was performed.
2352          */
2353         if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2354                 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2355                         alt_ioc_ready = 1;
2356                 else
2357                         printk(MYIOC_s_WARN_FMT
2358                             ": alt-ioc Not ready WARNING!\n",
2359                             ioc->alt_ioc->name);
2360         }
2361
2362         for (ii=0; ii<5; ii++) {
2363                 /* Get IOC facts! Allow 5 retries */
2364                 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2365                         break;
2366         }
2367
2368
2369         if (ii == 5) {
2370                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2371                     "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2372                 ret = -2;
2373         } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2374                 MptDisplayIocCapabilities(ioc);
2375         }
2376
2377         if (alt_ioc_ready) {
2378                 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2379                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2380                             "Initial Alt IocFacts failed rc=%x\n",
2381                             ioc->name, rc));
2382                         /* Retry - alt IOC was initialized once
2383                          */
2384                         rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2385                 }
2386                 if (rc) {
2387                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2388                             "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2389                         alt_ioc_ready = 0;
2390                         reset_alt_ioc_active = 0;
2391                 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2392                         MptDisplayIocCapabilities(ioc->alt_ioc);
2393                 }
2394         }
2395
2396         if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2397             (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2398                 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2399                 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2400                     IORESOURCE_IO);
2401                 if (pci_enable_device(ioc->pcidev))
2402                         return -5;
2403                 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2404                         "mpt"))
2405                         return -5;
2406         }
2407
2408         /*
2409          * Device is reset now. It must have de-asserted the interrupt line
2410          * (if it was asserted) and it should be safe to register for the
2411          * interrupt now.
2412          */
2413         if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2414                 ioc->pci_irq = -1;
2415                 if (ioc->pcidev->irq) {
2416                         if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2417                                 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2418                                     ioc->name);
2419                         else
2420                                 ioc->msi_enable = 0;
2421                         rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2422                             IRQF_SHARED, ioc->name, ioc);
2423                         if (rc < 0) {
2424                                 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2425                                     "interrupt %d!\n",
2426                                     ioc->name, ioc->pcidev->irq);
2427                                 if (ioc->msi_enable)
2428                                         pci_disable_msi(ioc->pcidev);
2429                                 ret = -EBUSY;
2430                                 goto out;
2431                         }
2432                         irq_allocated = 1;
2433                         ioc->pci_irq = ioc->pcidev->irq;
2434                         pci_set_master(ioc->pcidev);            /* ?? */
2435                         pci_set_drvdata(ioc->pcidev, ioc);
2436                         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2437                             "installed at interrupt %d\n", ioc->name,
2438                             ioc->pcidev->irq));
2439                 }
2440         }
2441
2442         /* Prime reply & request queues!
2443          * (mucho alloc's) Must be done prior to
2444          * init as upper addresses are needed for init.
2445          * If fails, continue with alt-ioc processing
2446          */
2447         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2448             ioc->name));
2449         if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2450                 ret = -3;
2451
2452         /* May need to check/upload firmware & data here!
2453          * If fails, continue with alt-ioc processing
2454          */
2455         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2456             ioc->name));
2457         if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2458                 ret = -4;
2459 // NEW!
2460         if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2461                 printk(MYIOC_s_WARN_FMT
2462                     ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2463                     ioc->alt_ioc->name, rc);
2464                 alt_ioc_ready = 0;
2465                 reset_alt_ioc_active = 0;
2466         }
2467
2468         if (alt_ioc_ready) {
2469                 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2470                         alt_ioc_ready = 0;
2471                         reset_alt_ioc_active = 0;
2472                         printk(MYIOC_s_WARN_FMT
2473                                 ": alt-ioc: (%d) init failure WARNING!\n",
2474                                         ioc->alt_ioc->name, rc);
2475                 }
2476         }
2477
2478         if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2479                 if (ioc->upload_fw) {
2480                         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2481                             "firmware upload required!\n", ioc->name));
2482
2483                         /* Controller is not operational, cannot do upload
2484                          */
2485                         if (ret == 0) {
2486                                 rc = mpt_do_upload(ioc, sleepFlag);
2487                                 if (rc == 0) {
2488                                         if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2489                                                 /*
2490                                                  * Maintain only one pointer to FW memory
2491                                                  * so there will not be two attempt to
2492                                                  * downloadboot onboard dual function
2493                                                  * chips (mpt_adapter_disable,
2494                                                  * mpt_diag_reset)
2495                                                  */
2496                                                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2497                                                     "mpt_upload:  alt_%s has cached_fw=%p \n",
2498                                                     ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2499                                                 ioc->cached_fw = NULL;
2500                                         }
2501                                 } else {
2502                                         printk(MYIOC_s_WARN_FMT
2503                                             "firmware upload failure!\n", ioc->name);
2504                                         ret = -6;
2505                                 }
2506                         }
2507                 }
2508         }
2509
2510         /*  Enable MPT base driver management of EventNotification
2511          *  and EventAck handling.
2512          */
2513         if ((ret == 0) && (!ioc->facts.EventState)) {
2514                 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2515                         "SendEventNotification\n",
2516                     ioc->name));
2517                 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2518         }
2519
2520         if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2521                 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2522
2523         if (ret == 0) {
2524                 /* Enable! (reply interrupt) */
2525                 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2526                 ioc->active = 1;
2527         }
2528         if (rc == 0) {  /* alt ioc */
2529                 if (reset_alt_ioc_active && ioc->alt_ioc) {
2530                         /* (re)Enable alt-IOC! (reply interrupt) */
2531                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2532                                 "reply irq re-enabled\n",
2533                                 ioc->alt_ioc->name));
2534                         CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2535                                 MPI_HIM_DIM);
2536                         ioc->alt_ioc->active = 1;
2537                 }
2538         }
2539
2540
2541         /*      Add additional "reason" check before call to GetLanConfigPages
2542          *      (combined with GetIoUnitPage2 call).  This prevents a somewhat
2543          *      recursive scenario; GetLanConfigPages times out, timer expired
2544          *      routine calls HardResetHandler, which calls into here again,
2545          *      and we try GetLanConfigPages again...
2546          */
2547         if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2548
2549                 /*
2550                  * Initialize link list for inactive raid volumes.
2551                  */
2552                 mutex_init(&ioc->raid_data.inactive_list_mutex);
2553                 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2554
2555                 switch (ioc->bus_type) {
2556
2557                 case SAS:
2558                         /* clear persistency table */
2559                         if(ioc->facts.IOCExceptions &
2560                             MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2561                                 ret = mptbase_sas_persist_operation(ioc,
2562                                     MPI_SAS_OP_CLEAR_NOT_PRESENT);
2563                                 if(ret != 0)
2564                                         goto out;
2565                         }
2566
2567                         /* Find IM volumes
2568                          */
2569                         mpt_findImVolumes(ioc);
2570
2571                         /* Check, and possibly reset, the coalescing value
2572                          */
2573                         mpt_read_ioc_pg_1(ioc);
2574
2575                         break;
2576
2577                 case FC:
2578                         if ((ioc->pfacts[0].ProtocolFlags &
2579                                 MPI_PORTFACTS_PROTOCOL_LAN) &&
2580                             (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2581                                 /*
2582                                  *  Pre-fetch the ports LAN MAC address!
2583                                  *  (LANPage1_t stuff)
2584                                  */
2585                                 (void) GetLanConfigPages(ioc);
2586                                 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2587                                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2588                                         "LanAddr = %02X:%02X:%02X"
2589                                         ":%02X:%02X:%02X\n",
2590                                         ioc->name, a[5], a[4],
2591                                         a[3], a[2], a[1], a[0]));
2592                         }
2593                         break;
2594
2595                 case SPI:
2596                         /* Get NVRAM and adapter maximums from SPP 0 and 2
2597                          */
2598                         mpt_GetScsiPortSettings(ioc, 0);
2599
2600                         /* Get version and length of SDP 1
2601                          */
2602                         mpt_readScsiDevicePageHeaders(ioc, 0);
2603
2604                         /* Find IM volumes
2605                          */
2606                         if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2607                                 mpt_findImVolumes(ioc);
2608
2609                         /* Check, and possibly reset, the coalescing value
2610                          */
2611                         mpt_read_ioc_pg_1(ioc);
2612
2613                         mpt_read_ioc_pg_4(ioc);
2614
2615                         break;
2616                 }
2617
2618                 GetIoUnitPage2(ioc);
2619                 mpt_get_manufacturing_pg_0(ioc);
2620         }
2621
2622  out:
2623         if ((ret != 0) && irq_allocated) {
2624                 free_irq(ioc->pci_irq, ioc);
2625                 if (ioc->msi_enable)
2626                         pci_disable_msi(ioc->pcidev);
2627         }
2628         return ret;
2629 }
2630
2631 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2632 /**
2633  *      mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2634  *      @ioc: Pointer to MPT adapter structure
2635  *      @pdev: Pointer to (struct pci_dev) structure
2636  *
2637  *      Search for PCI bus/dev_function which matches
2638  *      PCI bus/dev_function (+/-1) for newly discovered 929,
2639  *      929X, 1030 or 1035.
2640  *
2641  *      If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2642  *      using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2643  */
2644 static void
2645 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2646 {
2647         struct pci_dev *peer=NULL;
2648         unsigned int slot = PCI_SLOT(pdev->devfn);
2649         unsigned int func = PCI_FUNC(pdev->devfn);
2650         MPT_ADAPTER *ioc_srch;
2651
2652         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2653             " searching for devfn match on %x or %x\n",
2654             ioc->name, pci_name(pdev), pdev->bus->number,
2655             pdev->devfn, func-1, func+1));
2656
2657         peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2658         if (!peer) {
2659                 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2660                 if (!peer)
2661                         return;
2662         }
2663
2664         list_for_each_entry(ioc_srch, &ioc_list, list) {
2665                 struct pci_dev *_pcidev = ioc_srch->pcidev;
2666                 if (_pcidev == peer) {
2667                         /* Paranoia checks */
2668                         if (ioc->alt_ioc != NULL) {
2669                                 printk(MYIOC_s_WARN_FMT
2670                                     "Oops, already bound (%s <==> %s)!\n",
2671                                     ioc->name, ioc->name, ioc->alt_ioc->name);
2672                                 break;
2673                         } else if (ioc_srch->alt_ioc != NULL) {
2674                                 printk(MYIOC_s_WARN_FMT
2675                                     "Oops, already bound (%s <==> %s)!\n",
2676                                     ioc_srch->name, ioc_srch->name,
2677                                     ioc_srch->alt_ioc->name);
2678                                 break;
2679                         }
2680                         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2681                                 "FOUND! binding %s <==> %s\n",
2682                                 ioc->name, ioc->name, ioc_srch->name));
2683                         ioc_srch->alt_ioc = ioc;
2684                         ioc->alt_ioc = ioc_srch;
2685                 }
2686         }
2687         pci_dev_put(peer);
2688 }
2689
2690 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2691 /**
2692  *      mpt_adapter_disable - Disable misbehaving MPT adapter.
2693  *      @ioc: Pointer to MPT adapter structure
2694  */
2695 static void
2696 mpt_adapter_disable(MPT_ADAPTER *ioc)
2697 {
2698         int sz;
2699         int ret;
2700
2701         if (ioc->cached_fw != NULL) {
2702                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2703                         "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2704                 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2705                     ioc->cached_fw, CAN_SLEEP)) < 0) {
2706                         printk(MYIOC_s_WARN_FMT
2707                             ": firmware downloadboot failure (%d)!\n",
2708                             ioc->name, ret);
2709                 }
2710         }
2711
2712         /*
2713          * Put the controller into ready state (if its not already)
2714          */
2715         if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2716                 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2717                     CAN_SLEEP)) {
2718                         if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2719                                 printk(MYIOC_s_ERR_FMT "%s:  IOC msg unit "
2720                                     "reset failed to put ioc in ready state!\n",
2721                                     ioc->name, __func__);
2722                 } else
2723                         printk(MYIOC_s_ERR_FMT "%s:  IOC msg unit reset "
2724                             "failed!\n", ioc->name, __func__);
2725         }
2726
2727
2728         /* Disable adapter interrupts! */
2729         synchronize_irq(ioc->pcidev->irq);
2730         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2731         ioc->active = 0;
2732
2733         /* Clear any lingering interrupt */
2734         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2735         CHIPREG_READ32(&ioc->chip->IntStatus);
2736
2737         if (ioc->alloc != NULL) {
2738                 sz = ioc->alloc_sz;
2739                 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free  @ %p, sz=%d bytes\n",
2740                     ioc->name, ioc->alloc, ioc->alloc_sz));
2741                 pci_free_consistent(ioc->pcidev, sz,
2742                                 ioc->alloc, ioc->alloc_dma);
2743                 ioc->reply_frames = NULL;
2744                 ioc->req_frames = NULL;
2745                 ioc->alloc = NULL;
2746                 ioc->alloc_total -= sz;
2747         }
2748
2749         if (ioc->sense_buf_pool != NULL) {
2750                 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2751                 pci_free_consistent(ioc->pcidev, sz,
2752                                 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
2753                 ioc->sense_buf_pool = NULL;
2754                 ioc->alloc_total -= sz;
2755         }
2756
2757         if (ioc->events != NULL){
2758                 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2759                 kfree(ioc->events);
2760                 ioc->events = NULL;
2761                 ioc->alloc_total -= sz;
2762         }
2763
2764         mpt_free_fw_memory(ioc);
2765
2766         kfree(ioc->spi_data.nvram);
2767         mpt_inactive_raid_list_free(ioc);
2768         kfree(ioc->raid_data.pIocPg2);
2769         kfree(ioc->raid_data.pIocPg3);
2770         ioc->spi_data.nvram = NULL;
2771         ioc->raid_data.pIocPg3 = NULL;
2772
2773         if (ioc->spi_data.pIocPg4 != NULL) {
2774                 sz = ioc->spi_data.IocPg4Sz;
2775                 pci_free_consistent(ioc->pcidev, sz,
2776                         ioc->spi_data.pIocPg4,
2777                         ioc->spi_data.IocPg4_dma);
2778                 ioc->spi_data.pIocPg4 = NULL;
2779                 ioc->alloc_total -= sz;
2780         }
2781
2782         if (ioc->ReqToChain != NULL) {
2783                 kfree(ioc->ReqToChain);
2784                 kfree(ioc->RequestNB);
2785                 ioc->ReqToChain = NULL;
2786         }
2787
2788         kfree(ioc->ChainToChain);
2789         ioc->ChainToChain = NULL;
2790
2791         if (ioc->HostPageBuffer != NULL) {
2792                 if((ret = mpt_host_page_access_control(ioc,
2793                     MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2794                         printk(MYIOC_s_ERR_FMT
2795                            ": %s: host page buffers free failed (%d)!\n",
2796                             ioc->name, __func__, ret);
2797                 }
2798                 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2799                         "HostPageBuffer free  @ %p, sz=%d bytes\n",
2800                         ioc->name, ioc->HostPageBuffer,
2801                         ioc->HostPageBuffer_sz));
2802                 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
2803                     ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2804                 ioc->HostPageBuffer = NULL;
2805                 ioc->HostPageBuffer_sz = 0;
2806                 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2807         }
2808
2809         pci_set_drvdata(ioc->pcidev, NULL);
2810 }
2811 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2812 /**
2813  *      mpt_adapter_dispose - Free all resources associated with an MPT adapter
2814  *      @ioc: Pointer to MPT adapter structure
2815  *
2816  *      This routine unregisters h/w resources and frees all alloc'd memory
2817  *      associated with a MPT adapter structure.
2818  */
2819 static void
2820 mpt_adapter_dispose(MPT_ADAPTER *ioc)
2821 {
2822         int sz_first, sz_last;
2823
2824         if (ioc == NULL)
2825                 return;
2826
2827         sz_first = ioc->alloc_total;
2828
2829         mpt_adapter_disable(ioc);
2830
2831         if (ioc->pci_irq != -1) {
2832                 free_irq(ioc->pci_irq, ioc);
2833                 if (ioc->msi_enable)
2834                         pci_disable_msi(ioc->pcidev);
2835                 ioc->pci_irq = -1;
2836         }
2837
2838         if (ioc->memmap != NULL) {
2839                 iounmap(ioc->memmap);
2840                 ioc->memmap = NULL;
2841         }
2842
2843         pci_disable_device(ioc->pcidev);
2844         pci_release_selected_regions(ioc->pcidev, ioc->bars);
2845
2846         /*  Zap the adapter lookup ptr!  */
2847         list_del(&ioc->list);
2848
2849         sz_last = ioc->alloc_total;
2850         dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2851             ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2852
2853         if (ioc->alt_ioc)
2854                 ioc->alt_ioc->alt_ioc = NULL;
2855
2856         kfree(ioc);
2857 }
2858
2859 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2860 /**
2861  *      MptDisplayIocCapabilities - Disply IOC's capabilities.
2862  *      @ioc: Pointer to MPT adapter structure
2863  */
2864 static void
2865 MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2866 {
2867         int i = 0;
2868
2869         printk(KERN_INFO "%s: ", ioc->name);
2870         if (ioc->prod_name)
2871                 printk("%s: ", ioc->prod_name);
2872         printk("Capabilities={");
2873
2874         if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2875                 printk("Initiator");
2876                 i++;
2877         }
2878
2879         if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2880                 printk("%sTarget", i ? "," : "");
2881                 i++;
2882         }
2883
2884         if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2885                 printk("%sLAN", i ? "," : "");
2886                 i++;
2887         }
2888
2889 #if 0
2890         /*
2891          *  This would probably evoke more questions than it's worth
2892          */
2893         if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2894                 printk("%sLogBusAddr", i ? "," : "");
2895                 i++;
2896         }
2897 #endif
2898
2899         printk("}\n");
2900 }
2901
2902 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2903 /**
2904  *      MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2905  *      @ioc: Pointer to MPT_ADAPTER structure
2906  *      @force: Force hard KickStart of IOC
2907  *      @sleepFlag: Specifies whether the process can sleep
2908  *
2909  *      Returns:
2910  *               1 - DIAG reset and READY
2911  *               0 - READY initially OR soft reset and READY
2912  *              -1 - Any failure on KickStart
2913  *              -2 - Msg Unit Reset Failed
2914  *              -3 - IO Unit Reset Failed
2915  *              -4 - IOC owned by a PEER
2916  */
2917 static int
2918 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2919 {
2920         u32      ioc_state;
2921         int      statefault = 0;
2922         int      cntdn;
2923         int      hard_reset_done = 0;
2924         int      r;
2925         int      ii;
2926         int      whoinit;
2927
2928         /* Get current [raw] IOC state  */
2929         ioc_state = mpt_GetIocState(ioc, 0);
2930         dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2931
2932         /*
2933          *      Check to see if IOC got left/stuck in doorbell handshake
2934          *      grip of death.  If so, hard reset the IOC.
2935          */
2936         if (ioc_state & MPI_DOORBELL_ACTIVE) {
2937                 statefault = 1;
2938                 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2939                                 ioc->name);
2940         }
2941
2942         /* Is it already READY? */
2943         if (!statefault &&
2944             ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2945                 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2946                     "IOC is in READY state\n", ioc->name));
2947                 return 0;
2948         }
2949
2950         /*
2951          *      Check to see if IOC is in FAULT state.
2952          */
2953         if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2954                 statefault = 2;
2955                 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2956                     ioc->name);
2957                 printk(MYIOC_s_WARN_FMT "           FAULT code = %04xh\n",
2958                     ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2959         }
2960
2961         /*
2962          *      Hmmm...  Did it get left operational?
2963          */
2964         if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2965                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2966                                 ioc->name));
2967
2968                 /* Check WhoInit.
2969                  * If PCI Peer, exit.
2970                  * Else, if no fault conditions are present, issue a MessageUnitReset
2971                  * Else, fall through to KickStart case
2972                  */
2973                 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2974                 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2975                         "whoinit 0x%x statefault %d force %d\n",
2976                         ioc->name, whoinit, statefault, force));
2977                 if (whoinit == MPI_WHOINIT_PCI_PEER)
2978                         return -4;
2979                 else {
2980                         if ((statefault == 0 ) && (force == 0)) {
2981                                 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2982                                         return 0;
2983                         }
2984                         statefault = 3;
2985                 }
2986         }
2987
2988         hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2989         if (hard_reset_done < 0)
2990                 return -1;
2991
2992         /*
2993          *  Loop here waiting for IOC to come READY.
2994          */
2995         ii = 0;
2996         cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5;     /* 5 seconds */
2997
2998         while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2999                 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
3000                         /*
3001                          *  BIOS or previous driver load left IOC in OP state.
3002                          *  Reset messaging FIFOs.
3003                          */
3004                         if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
3005                                 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
3006                                 return -2;
3007                         }
3008                 } else if (ioc_state == MPI_IOC_STATE_RESET) {
3009                         /*
3010                          *  Something is wrong.  Try to get IOC back
3011                          *  to a known state.
3012                          */
3013                         if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3014                                 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3015                                 return -3;
3016                         }
3017                 }
3018
3019                 ii++; cntdn--;
3020                 if (!cntdn) {
3021                         printk(MYIOC_s_ERR_FMT
3022                                 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3023                                 ioc->name, ioc_state, (int)((ii+5)/HZ));
3024                         return -ETIME;
3025                 }
3026
3027                 if (sleepFlag == CAN_SLEEP) {
3028                         msleep(1);
3029                 } else {
3030                         mdelay (1);     /* 1 msec delay */
3031                 }
3032
3033         }
3034
3035         if (statefault < 3) {
3036                 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3037                         statefault == 1 ? "stuck handshake" : "IOC FAULT");
3038         }
3039
3040         return hard_reset_done;
3041 }
3042
3043 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3044 /**
3045  *      mpt_GetIocState - Get the current state of a MPT adapter.
3046  *      @ioc: Pointer to MPT_ADAPTER structure
3047  *      @cooked: Request raw or cooked IOC state
3048  *
3049  *      Returns all IOC Doorbell register bits if cooked==0, else just the
3050  *      Doorbell bits in MPI_IOC_STATE_MASK.
3051  */
3052 u32
3053 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3054 {
3055         u32 s, sc;
3056
3057         /*  Get!  */
3058         s = CHIPREG_READ32(&ioc->chip->Doorbell);
3059         sc = s & MPI_IOC_STATE_MASK;
3060
3061         /*  Save!  */
3062         ioc->last_state = sc;
3063
3064         return cooked ? sc : s;
3065 }
3066
3067 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3068 /**
3069  *      GetIocFacts - Send IOCFacts request to MPT adapter.
3070  *      @ioc: Pointer to MPT_ADAPTER structure
3071  *      @sleepFlag: Specifies whether the process can sleep
3072  *      @reason: If recovery, only update facts.
3073  *
3074  *      Returns 0 for success, non-zero for failure.
3075  */
3076 static int
3077 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3078 {
3079         IOCFacts_t               get_facts;
3080         IOCFactsReply_t         *facts;
3081         int                      r;
3082         int                      req_sz;
3083         int                      reply_sz;
3084         int                      sz;
3085         u32                      status, vv;
3086         u8                       shiftFactor=1;
3087
3088         /* IOC *must* NOT be in RESET state! */
3089         if (ioc->last_state == MPI_IOC_STATE_RESET) {
3090                 printk(KERN_ERR MYNAM
3091                     ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3092                     ioc->name, ioc->last_state);
3093                 return -44;
3094         }
3095
3096         facts = &ioc->facts;
3097
3098         /* Destination (reply area)... */
3099         reply_sz = sizeof(*facts);
3100         memset(facts, 0, reply_sz);
3101
3102         /* Request area (get_facts on the stack right now!) */
3103         req_sz = sizeof(get_facts);
3104         memset(&get_facts, 0, req_sz);
3105
3106         get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3107         /* Assert: All other get_facts fields are zero! */
3108
3109         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3110             "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3111             ioc->name, req_sz, reply_sz));
3112
3113         /* No non-zero fields in the get_facts request are greater than
3114          * 1 byte in size, so we can just fire it off as is.
3115          */
3116         r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3117                         reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3118         if (r != 0)
3119                 return r;
3120
3121         /*
3122          * Now byte swap (GRRR) the necessary fields before any further
3123          * inspection of reply contents.
3124          *
3125          * But need to do some sanity checks on MsgLength (byte) field
3126          * to make sure we don't zero IOC's req_sz!
3127          */
3128         /* Did we get a valid reply? */
3129         if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3130                 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3131                         /*
3132                          * If not been here, done that, save off first WhoInit value
3133                          */
3134                         if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3135                                 ioc->FirstWhoInit = facts->WhoInit;
3136                 }
3137
3138                 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3139                 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3140                 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3141                 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3142                 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3143                 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3144                 /* CHECKME! IOCStatus, IOCLogInfo */
3145
3146                 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3147                 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3148
3149                 /*
3150                  * FC f/w version changed between 1.1 and 1.2
3151                  *      Old: u16{Major(4),Minor(4),SubMinor(8)}
3152                  *      New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3153                  */
3154                 if (facts->MsgVersion < MPI_VERSION_01_02) {
3155                         /*
3156                          *      Handle old FC f/w style, convert to new...
3157                          */
3158                         u16      oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3159                         facts->FWVersion.Word =
3160                                         ((oldv<<12) & 0xFF000000) |
3161                                         ((oldv<<8)  & 0x000FFF00);
3162                 } else
3163                         facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3164
3165                 facts->ProductID = le16_to_cpu(facts->ProductID);
3166
3167                 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3168                     > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3169                         ioc->ir_firmware = 1;
3170
3171                 facts->CurrentHostMfaHighAddr =
3172                                 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3173                 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3174                 facts->CurrentSenseBufferHighAddr =
3175                                 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3176                 facts->CurReplyFrameSize =
3177                                 le16_to_cpu(facts->CurReplyFrameSize);
3178                 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3179
3180                 /*
3181                  * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3182                  * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3183                  * to 14 in MPI-1.01.0x.
3184                  */
3185                 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3186                     facts->MsgVersion > MPI_VERSION_01_00) {
3187                         facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3188                 }
3189
3190                 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3191
3192                 if (!facts->RequestFrameSize) {
3193                         /*  Something is wrong!  */
3194                         printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3195                                         ioc->name);
3196                         return -55;
3197                 }
3198
3199                 r = sz = facts->BlockSize;
3200                 vv = ((63 / (sz * 4)) + 1) & 0x03;
3201                 ioc->NB_for_64_byte_frame = vv;
3202                 while ( sz )
3203                 {
3204                         shiftFactor++;
3205                         sz = sz >> 1;
3206                 }
3207                 ioc->NBShiftFactor  = shiftFactor;
3208                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3209                     "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3210                     ioc->name, vv, shiftFactor, r));
3211
3212                 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3213                         /*
3214                          * Set values for this IOC's request & reply frame sizes,
3215                          * and request & reply queue depths...
3216                          */
3217                         ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3218                         ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3219                         ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3220                         ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3221
3222                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3223                                 ioc->name, ioc->reply_sz, ioc->reply_depth));
3224                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz  =%3d, req_depth  =%4d\n",
3225                                 ioc->name, ioc->req_sz, ioc->req_depth));
3226
3227                         /* Get port facts! */
3228                         if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3229                                 return r;
3230                 }
3231         } else {
3232                 printk(MYIOC_s_ERR_FMT
3233                      "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3234                      ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3235                      RequestFrameSize)/sizeof(u32)));
3236                 return -66;
3237         }
3238
3239         return 0;
3240 }
3241
3242 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3243 /**
3244  *      GetPortFacts - Send PortFacts request to MPT adapter.
3245  *      @ioc: Pointer to MPT_ADAPTER structure
3246  *      @portnum: Port number
3247  *      @sleepFlag: Specifies whether the process can sleep
3248  *
3249  *      Returns 0 for success, non-zero for failure.
3250  */
3251 static int
3252 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3253 {
3254         PortFacts_t              get_pfacts;
3255         PortFactsReply_t        *pfacts;
3256         int                      ii;
3257         int                      req_sz;
3258         int                      reply_sz;
3259         int                      max_id;
3260
3261         /* IOC *must* NOT be in RESET state! */
3262         if (ioc->last_state == MPI_IOC_STATE_RESET) {
3263                 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3264                     ioc->name, ioc->last_state );
3265                 return -4;
3266         }
3267
3268         pfacts = &ioc->pfacts[portnum];
3269
3270         /* Destination (reply area)...  */
3271         reply_sz = sizeof(*pfacts);
3272         memset(pfacts, 0, reply_sz);
3273
3274         /* Request area (get_pfacts on the stack right now!) */
3275         req_sz = sizeof(get_pfacts);
3276         memset(&get_pfacts, 0, req_sz);
3277
3278         get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3279         get_pfacts.PortNumber = portnum;
3280         /* Assert: All other get_pfacts fields are zero! */
3281
3282         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3283                         ioc->name, portnum));
3284
3285         /* No non-zero fields in the get_pfacts request are greater than
3286          * 1 byte in size, so we can just fire it off as is.
3287          */
3288         ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3289                                 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3290         if (ii != 0)
3291                 return ii;
3292
3293         /* Did we get a valid reply? */
3294
3295         /* Now byte swap the necessary fields in the response. */
3296         pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3297         pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3298         pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3299         pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3300         pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3301         pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3302         pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3303         pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3304         pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3305
3306         max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3307             pfacts->MaxDevices;
3308         ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3309         ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3310
3311         /*
3312          * Place all the devices on channels
3313          *
3314          * (for debuging)
3315          */
3316         if (mpt_channel_mapping) {
3317                 ioc->devices_per_bus = 1;
3318                 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3319         }
3320
3321         return 0;
3322 }
3323
3324 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3325 /**
3326  *      SendIocInit - Send IOCInit request to MPT adapter.
3327  *      @ioc: Pointer to MPT_ADAPTER structure
3328  *      @sleepFlag: Specifies whether the process can sleep
3329  *
3330  *      Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3331  *
3332  *      Returns 0 for success, non-zero for failure.
3333  */
3334 static int
3335 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3336 {
3337         IOCInit_t                ioc_init;
3338         MPIDefaultReply_t        init_reply;
3339         u32                      state;
3340         int                      r;
3341         int                      count;
3342         int                      cntdn;
3343
3344         memset(&ioc_init, 0, sizeof(ioc_init));
3345         memset(&init_reply, 0, sizeof(init_reply));
3346
3347         ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3348         ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3349
3350         /* If we are in a recovery mode and we uploaded the FW image,
3351          * then this pointer is not NULL. Skip the upload a second time.
3352          * Set this flag if cached_fw set for either IOC.
3353          */
3354         if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3355                 ioc->upload_fw = 1;
3356         else
3357                 ioc->upload_fw = 0;
3358         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3359                    ioc->name, ioc->upload_fw, ioc->facts.Flags));
3360
3361         ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3362         ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3363
3364         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3365                    ioc->name, ioc->facts.MsgVersion));
3366         if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3367                 // set MsgVersion and HeaderVersion host driver was built with
3368                 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3369                 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3370
3371                 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3372                         ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3373                 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3374                         return -99;
3375         }
3376         ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz);   /* in BYTES */
3377
3378         if (ioc->sg_addr_size == sizeof(u64)) {
3379                 /* Save the upper 32-bits of the request
3380                  * (reply) and sense buffers.
3381                  */
3382                 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3383                 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3384         } else {
3385                 /* Force 32-bit addressing */
3386                 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3387                 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3388         }
3389
3390         ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3391         ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3392         ioc->facts.MaxDevices = ioc_init.MaxDevices;
3393         ioc->facts.MaxBuses = ioc_init.MaxBuses;
3394
3395         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3396                         ioc->name, &ioc_init));
3397
3398         r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3399                                 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3400         if (r != 0) {
3401                 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3402                 return r;
3403         }
3404
3405         /* No need to byte swap the multibyte fields in the reply
3406          * since we don't even look at its contents.
3407          */
3408
3409         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3410                         ioc->name, &ioc_init));
3411
3412         if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3413                 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3414                 return r;
3415         }
3416
3417         /* YIKES!  SUPER IMPORTANT!!!
3418          *  Poll IocState until _OPERATIONAL while IOC is doing
3419          *  LoopInit and TargetDiscovery!
3420          */
3421         count = 0;
3422         cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60;    /* 60 seconds */
3423         state = mpt_GetIocState(ioc, 1);
3424         while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3425                 if (sleepFlag == CAN_SLEEP) {
3426                         msleep(1);
3427                 } else {
3428                         mdelay(1);
3429                 }
3430
3431                 if (!cntdn) {
3432                         printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3433                                         ioc->name, (int)((count+5)/HZ));
3434                         return -9;
3435                 }
3436
3437                 state = mpt_GetIocState(ioc, 1);
3438                 count++;
3439         }
3440         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3441                         ioc->name, count));
3442
3443         ioc->aen_event_read_flag=0;
3444         return r;
3445 }
3446
3447 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3448 /**
3449  *      SendPortEnable - Send PortEnable request to MPT adapter port.
3450  *      @ioc: Pointer to MPT_ADAPTER structure
3451  *      @portnum: Port number to enable
3452  *      @sleepFlag: Specifies whether the process can sleep
3453  *
3454  *      Send PortEnable to bring IOC to OPERATIONAL state.
3455  *
3456  *      Returns 0 for success, non-zero for failure.
3457  */
3458 static int
3459 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3460 {
3461         PortEnable_t             port_enable;
3462         MPIDefaultReply_t        reply_buf;
3463         int      rc;
3464         int      req_sz;
3465         int      reply_sz;
3466
3467         /*  Destination...  */
3468         reply_sz = sizeof(MPIDefaultReply_t);
3469         memset(&reply_buf, 0, reply_sz);
3470
3471         req_sz = sizeof(PortEnable_t);
3472         memset(&port_enable, 0, req_sz);
3473
3474         port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3475         port_enable.PortNumber = portnum;
3476 /*      port_enable.ChainOffset = 0;            */
3477 /*      port_enable.MsgFlags = 0;               */
3478 /*      port_enable.MsgContext = 0;             */
3479
3480         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3481                         ioc->name, portnum, &port_enable));
3482
3483         /* RAID FW may take a long time to enable
3484          */
3485         if (ioc->ir_firmware || ioc->bus_type == SAS) {
3486                 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3487                 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3488                 300 /*seconds*/, sleepFlag);
3489         } else {
3490                 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3491                 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3492                 30 /*seconds*/, sleepFlag);
3493         }
3494         return rc;
3495 }
3496
3497 /**
3498  *      mpt_alloc_fw_memory - allocate firmware memory
3499  *      @ioc: Pointer to MPT_ADAPTER structure
3500  *      @size: total FW bytes
3501  *
3502  *      If memory has already been allocated, the same (cached) value
3503  *      is returned.
3504  *
3505  *      Return 0 if successful, or non-zero for failure
3506  **/
3507 int
3508 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3509 {
3510         int rc;
3511
3512         if (ioc->cached_fw) {
3513                 rc = 0;  /* use already allocated memory */
3514                 goto out;
3515         }
3516         else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3517                 ioc->cached_fw = ioc->alt_ioc->cached_fw;  /* use alt_ioc's memory */
3518                 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3519                 rc = 0;
3520                 goto out;
3521         }
3522         ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3523         if (!ioc->cached_fw) {
3524                 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3525                     ioc->name);
3526                 rc = -1;
3527         } else {
3528                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image  @ %p[%p], sz=%d[%x] bytes\n",
3529                     ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3530                 ioc->alloc_total += size;
3531                 rc = 0;
3532         }
3533  out:
3534         return rc;
3535 }
3536
3537 /**
3538  *      mpt_free_fw_memory - free firmware memory
3539  *      @ioc: Pointer to MPT_ADAPTER structure
3540  *
3541  *      If alt_img is NULL, delete from ioc structure.
3542  *      Else, delete a secondary image in same format.
3543  **/
3544 void
3545 mpt_free_fw_memory(MPT_ADAPTER *ioc)
3546 {
3547         int sz;
3548
3549         if (!ioc->cached_fw)
3550                 return;
3551
3552         sz = ioc->facts.FWImageSize;
3553         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image  @ %p[%p], sz=%d[%x] bytes\n",
3554                  ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3555         pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3556         ioc->alloc_total -= sz;
3557         ioc->cached_fw = NULL;
3558 }
3559
3560 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3561 /**
3562  *      mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3563  *      @ioc: Pointer to MPT_ADAPTER structure
3564  *      @sleepFlag: Specifies whether the process can sleep
3565  *
3566  *      Returns 0 for success, >0 for handshake failure
3567  *              <0 for fw upload failure.
3568  *
3569  *      Remark: If bound IOC and a successful FWUpload was performed
3570  *      on the bound IOC, the second image is discarded
3571  *      and memory is free'd. Both channels must upload to prevent
3572  *      IOC from running in degraded mode.
3573  */
3574 static int
3575 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3576 {
3577         u8                       reply[sizeof(FWUploadReply_t)];
3578         FWUpload_t              *prequest;
3579         FWUploadReply_t         *preply;
3580         FWUploadTCSGE_t         *ptcsge;
3581         u32                      flagsLength;
3582         int                      ii, sz, reply_sz;
3583         int                      cmdStatus;
3584         int                     request_size;
3585         /* If the image size is 0, we are done.
3586          */
3587         if ((sz = ioc->facts.FWImageSize) == 0)
3588                 return 0;
3589
3590         if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3591                 return -ENOMEM;
3592
3593         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image  @ %p[%p], sz=%d[%x] bytes\n",
3594             ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3595
3596         prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3597             kzalloc(ioc->req_sz, GFP_KERNEL);
3598         if (!prequest) {
3599                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3600                     "while allocating memory \n", ioc->name));
3601                 mpt_free_fw_memory(ioc);
3602                 return -ENOMEM;
3603         }
3604
3605         preply = (FWUploadReply_t *)&reply;
3606
3607         reply_sz = sizeof(reply);
3608         memset(preply, 0, reply_sz);
3609
3610         prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3611         prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3612
3613         ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3614         ptcsge->DetailsLength = 12;
3615         ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3616         ptcsge->ImageSize = cpu_to_le32(sz);
3617         ptcsge++;
3618
3619         flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3620         ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3621         request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3622             ioc->SGE_size;
3623         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3624             " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3625             ioc->facts.FWImageSize, request_size));
3626         DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3627
3628         ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3629             reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3630
3631         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3632             "rc=%x \n", ioc->name, ii));
3633
3634         cmdStatus = -EFAULT;
3635         if (ii == 0) {
3636                 /* Handshake transfer was complete and successful.
3637                  * Check the Reply Frame.
3638                  */
3639                 int status;
3640                 status = le16_to_cpu(preply->IOCStatus) &
3641                                 MPI_IOCSTATUS_MASK;
3642                 if (status == MPI_IOCSTATUS_SUCCESS &&
3643                     ioc->facts.FWImageSize ==
3644                     le32_to_cpu(preply->ActualImageSize))
3645                                 cmdStatus = 0;
3646         }
3647         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3648                         ioc->name, cmdStatus));
3649
3650
3651         if (cmdStatus) {
3652                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3653                     "freeing image \n", ioc->name));
3654                 mpt_free_fw_memory(ioc);
3655         }
3656         kfree(prequest);
3657
3658         return cmdStatus;
3659 }
3660
3661 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3662 /**
3663  *      mpt_downloadboot - DownloadBoot code
3664  *      @ioc: Pointer to MPT_ADAPTER structure
3665  *      @pFwHeader: Pointer to firmware header info
3666  *      @sleepFlag: Specifies whether the process can sleep
3667  *
3668  *      FwDownloadBoot requires Programmed IO access.
3669  *
3670  *      Returns 0 for success
3671  *              -1 FW Image size is 0
3672  *              -2 No valid cached_fw Pointer
3673  *              <0 for fw upload failure.
3674  */
3675 static int
3676 mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3677 {
3678         MpiExtImageHeader_t     *pExtImage;
3679         u32                      fwSize;
3680         u32                      diag0val;
3681         int                      count;
3682         u32                     *ptrFw;
3683         u32                      diagRwData;
3684         u32                      nextImage;
3685         u32                      load_addr;
3686         u32                      ioc_state=0;
3687
3688         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3689                                 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3690
3691         CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3692         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3693         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3694         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3695         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3696         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3697
3698         CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3699
3700         /* wait 1 msec */
3701         if (sleepFlag == CAN_SLEEP) {
3702                 msleep(1);
3703         } else {
3704                 mdelay (1);
3705         }
3706
3707         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3708         CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3709
3710         for (count = 0; count < 30; count ++) {
3711                 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3712                 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3713                         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3714                                 ioc->name, count));
3715                         break;
3716                 }
3717                 /* wait .1 sec */
3718                 if (sleepFlag == CAN_SLEEP) {
3719                         msleep (100);
3720                 } else {
3721                         mdelay (100);
3722                 }
3723         }
3724
3725         if ( count == 30 ) {
3726                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3727                 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3728                 ioc->name, diag0val));
3729                 return -3;
3730         }
3731
3732         CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3733         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3734         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3735         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3736         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3737         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3738
3739         /* Set the DiagRwEn and Disable ARM bits */
3740         CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3741
3742         fwSize = (pFwHeader->ImageSize + 3)/4;
3743         ptrFw = (u32 *) pFwHeader;
3744
3745         /* Write the LoadStartAddress to the DiagRw Address Register
3746          * using Programmed IO
3747          */
3748         if (ioc->errata_flag_1064)
3749                 pci_enable_io_access(ioc->pcidev);
3750
3751         CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3752         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3753                 ioc->name, pFwHeader->LoadStartAddress));
3754
3755         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3756                                 ioc->name, fwSize*4, ptrFw));
3757         while (fwSize--) {
3758                 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3759         }
3760
3761         nextImage = pFwHeader->NextImageHeaderOffset;
3762         while (nextImage) {
3763                 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3764
3765                 load_addr = pExtImage->LoadStartAddress;
3766
3767                 fwSize = (pExtImage->ImageSize + 3) >> 2;
3768                 ptrFw = (u32 *)pExtImage;
3769
3770                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3771                                                 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3772                 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3773
3774                 while (fwSize--) {
3775                         CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3776                 }
3777                 nextImage = pExtImage->NextImageHeaderOffset;
3778         }
3779
3780         /* Write the IopResetVectorRegAddr */
3781         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name,  pFwHeader->IopResetRegAddr));
3782         CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3783
3784         /* Write the IopResetVectorValue */
3785         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3786         CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3787
3788         /* Clear the internal flash bad bit - autoincrementing register,
3789          * so must do two writes.
3790          */
3791         if (ioc->bus_type == SPI) {
3792                 /*
3793                  * 1030 and 1035 H/W errata, workaround to access
3794                  * the ClearFlashBadSignatureBit
3795                  */
3796                 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3797                 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3798                 diagRwData |= 0x40000000;
3799                 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3800                 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3801
3802         } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3803                 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3804                 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3805                     MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3806
3807                 /* wait 1 msec */
3808                 if (sleepFlag == CAN_SLEEP) {
3809                         msleep (1);
3810                 } else {
3811                         mdelay (1);
3812                 }
3813         }
3814
3815         if (ioc->errata_flag_1064)
3816                 pci_disable_io_access(ioc->pcidev);
3817
3818         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3819         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3820                 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3821                 ioc->name, diag0val));
3822         diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3823         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3824                 ioc->name, diag0val));
3825         CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3826
3827         /* Write 0xFF to reset the sequencer */
3828         CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3829
3830         if (ioc->bus_type == SAS) {
3831                 ioc_state = mpt_GetIocState(ioc, 0);
3832                 if ( (GetIocFacts(ioc, sleepFlag,
3833                                 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3834                         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3835                                         ioc->name, ioc_state));
3836                         return -EFAULT;
3837                 }
3838         }
3839
3840         for (count=0; count<HZ*20; count++) {
3841                 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3842                         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3843                                 "downloadboot successful! (count=%d) IocState=%x\n",
3844                                 ioc->name, count, ioc_state));
3845                         if (ioc->bus_type == SAS) {
3846                                 return 0;
3847                         }
3848                         if ((SendIocInit(ioc, sleepFlag)) != 0) {
3849                                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3850                                         "downloadboot: SendIocInit failed\n",
3851                                         ioc->name));
3852                                 return -EFAULT;
3853                         }
3854                         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3855                                         "downloadboot: SendIocInit successful\n",
3856                                         ioc->name));
3857                         return 0;
3858                 }
3859                 if (sleepFlag == CAN_SLEEP) {
3860                         msleep (10);
3861                 } else {
3862                         mdelay (10);
3863                 }
3864         }
3865         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3866                 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3867         return -EFAULT;
3868 }
3869
3870 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3871 /**
3872  *      KickStart - Perform hard reset of MPT adapter.
3873  *      @ioc: Pointer to MPT_ADAPTER structure
3874  *      @force: Force hard reset
3875  *      @sleepFlag: Specifies whether the process can sleep
3876  *
3877  *      This routine places MPT adapter in diagnostic mode via the
3878  *      WriteSequence register, and then performs a hard reset of adapter
3879  *      via the Diagnostic register.
3880  *
3881  *      Inputs:   sleepflag - CAN_SLEEP (non-interrupt thread)
3882  *                      or NO_SLEEP (interrupt thread, use mdelay)
3883  *                force - 1 if doorbell active, board fault state
3884  *                              board operational, IOC_RECOVERY or
3885  *                              IOC_BRINGUP and there is an alt_ioc.
3886  *                        0 else
3887  *
3888  *      Returns:
3889  *               1 - hard reset, READY
3890  *               0 - no reset due to History bit, READY
3891  *              -1 - no reset due to History bit but not READY
3892  *                   OR reset but failed to come READY
3893  *              -2 - no reset, could not enter DIAG mode
3894  *              -3 - reset but bad FW bit
3895  */
3896 static int
3897 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3898 {
3899         int hard_reset_done = 0;
3900         u32 ioc_state=0;
3901         int cnt,cntdn;
3902
3903         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3904         if (ioc->bus_type == SPI) {
3905                 /* Always issue a Msg Unit Reset first. This will clear some
3906                  * SCSI bus hang conditions.
3907                  */
3908                 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3909
3910                 if (sleepFlag == CAN_SLEEP) {
3911                         msleep (1000);
3912                 } else {
3913                         mdelay (1000);
3914                 }
3915         }
3916
3917         hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3918         if (hard_reset_done < 0)
3919                 return hard_reset_done;
3920
3921         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3922                 ioc->name));
3923
3924         cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2;     /* 2 seconds */
3925         for (cnt=0; cnt<cntdn; cnt++) {
3926                 ioc_state = mpt_GetIocState(ioc, 1);
3927                 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3928                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3929                                         ioc->name, cnt));
3930                         return hard_reset_done;
3931                 }
3932                 if (sleepFlag == CAN_SLEEP) {
3933                         msleep (10);
3934                 } else {
3935                         mdelay (10);
3936                 }
3937         }
3938
3939         dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3940                 ioc->name, mpt_GetIocState(ioc, 0)));
3941         return -1;
3942 }
3943
3944 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3945 /**
3946  *      mpt_diag_reset - Perform hard reset of the adapter.
3947  *      @ioc: Pointer to MPT_ADAPTER structure
3948  *      @ignore: Set if to honor and clear to ignore
3949  *              the reset history bit
3950  *      @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3951  *              else set to NO_SLEEP (use mdelay instead)
3952  *
3953  *      This routine places the adapter in diagnostic mode via the
3954  *      WriteSequence register and then performs a hard reset of adapter
3955  *      via the Diagnostic register. Adapter should be in ready state
3956  *      upon successful completion.
3957  *
3958  *      Returns:  1  hard reset successful
3959  *                0  no reset performed because reset history bit set
3960  *               -2  enabling diagnostic mode failed
3961  *               -3  diagnostic reset failed
3962  */
3963 static int
3964 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3965 {
3966         u32 diag0val;
3967         u32 doorbell;
3968         int hard_reset_done = 0;
3969         int count = 0;
3970         u32 diag1val = 0;
3971         MpiFwHeader_t *cached_fw;       /* Pointer to FW */
3972         u8       cb_idx;
3973
3974         /* Clear any existing interrupts */
3975         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3976
3977         if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3978
3979                 if (!ignore)
3980                         return 0;
3981
3982                 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3983                         "address=%p\n",  ioc->name, __func__,
3984                         &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3985                 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3986                 if (sleepFlag == CAN_SLEEP)
3987                         msleep(1);
3988                 else
3989                         mdelay(1);
3990
3991                 /*
3992                  * Call each currently registered protocol IOC reset handler
3993                  * with pre-reset indication.
3994                  * NOTE: If we're doing _IOC_BRINGUP, there can be no
3995                  * MptResetHandlers[] registered yet.
3996                  */
3997                 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3998                         if (MptResetHandlers[cb_idx])
3999                                 (*(MptResetHandlers[cb_idx]))(ioc,
4000                                                 MPT_IOC_PRE_RESET);
4001                 }
4002
4003                 for (count = 0; count < 60; count ++) {
4004                         doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4005                         doorbell &= MPI_IOC_STATE_MASK;
4006
4007                         drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4008                                 "looking for READY STATE: doorbell=%x"
4009                                 " count=%d\n",
4010                                 ioc->name, doorbell, count));
4011
4012                         if (doorbell == MPI_IOC_STATE_READY) {
4013                                 return 1;
4014                         }
4015
4016                         /* wait 1 sec */
4017                         if (sleepFlag == CAN_SLEEP)
4018                                 msleep(1000);
4019                         else
4020                                 mdelay(1000);
4021                 }
4022                 return -1;
4023         }
4024
4025         /* Use "Diagnostic reset" method! (only thing available!) */
4026         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4027
4028         if (ioc->debug_level & MPT_DEBUG) {
4029                 if (ioc->alt_ioc)
4030                         diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4031                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4032                         ioc->name, diag0val, diag1val));
4033         }
4034
4035         /* Do the reset if we are told to ignore the reset history
4036          * or if the reset history is 0
4037          */
4038         if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4039                 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4040                         /* Write magic sequence to WriteSequence register
4041                          * Loop until in diagnostic mode
4042                          */
4043                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4044                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4045                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4046                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4047                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4048                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4049
4050                         /* wait 100 msec */
4051                         if (sleepFlag == CAN_SLEEP) {
4052                                 msleep (100);
4053                         } else {
4054                                 mdelay (100);
4055                         }
4056
4057                         count++;
4058                         if (count > 20) {
4059                                 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4060                                                 ioc->name, diag0val);
4061                                 return -2;
4062
4063                         }
4064
4065                         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4066
4067                         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4068                                         ioc->name, diag0val));
4069                 }
4070
4071                 if (ioc->debug_level & MPT_DEBUG) {
4072                         if (ioc->alt_ioc)
4073                                 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4074                         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4075                                 ioc->name, diag0val, diag1val));
4076                 }
4077                 /*
4078                  * Disable the ARM (Bug fix)
4079                  *
4080                  */
4081                 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4082                 mdelay(1);
4083
4084                 /*
4085                  * Now hit the reset bit in the Diagnostic register
4086                  * (THE BIG HAMMER!) (Clears DRWE bit).
4087                  */
4088                 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4089                 hard_reset_done = 1;
4090                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4091                                 ioc->name));
4092
4093                 /*
4094                  * Call each currently registered protocol IOC reset handler
4095                  * with pre-reset indication.
4096                  * NOTE: If we're doing _IOC_BRINGUP, there can be no
4097                  * MptResetHandlers[] registered yet.
4098                  */
4099                 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4100                         if (MptResetHandlers[cb_idx]) {
4101                                 mpt_signal_reset(cb_idx,
4102                                         ioc, MPT_IOC_PRE_RESET);
4103                                 if (ioc->alt_ioc) {
4104                                         mpt_signal_reset(cb_idx,
4105                                         ioc->alt_ioc, MPT_IOC_PRE_RESET);
4106                                 }
4107                         }
4108                 }
4109
4110                 if (ioc->cached_fw)
4111                         cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4112                 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4113                         cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4114                 else
4115                         cached_fw = NULL;
4116                 if (cached_fw) {
4117                         /* If the DownloadBoot operation fails, the
4118                          * IOC will be left unusable. This is a fatal error
4119                          * case.  _diag_reset will return < 0
4120                          */
4121                         for (count = 0; count < 30; count ++) {
4122                                 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4123                                 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4124                                         break;
4125                                 }
4126
4127                                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4128                                         ioc->name, diag0val, count));
4129                                 /* wait 1 sec */
4130                                 if (sleepFlag == CAN_SLEEP) {
4131                                         msleep (1000);
4132                                 } else {
4133                                         mdelay (1000);
4134                                 }
4135                         }
4136                         if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4137                                 printk(MYIOC_s_WARN_FMT
4138                                         "firmware downloadboot failure (%d)!\n", ioc->name, count);
4139                         }
4140
4141                 } else {
4142                         /* Wait for FW to reload and for board
4143                          * to go to the READY state.
4144                          * Maximum wait is 60 seconds.
4145                          * If fail, no error will check again
4146                          * with calling program.
4147                          */
4148                         for (count = 0; count < 60; count ++) {
4149                                 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4150                                 doorbell &= MPI_IOC_STATE_MASK;
4151
4152                                 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4153                                     "looking for READY STATE: doorbell=%x"
4154                                     " count=%d\n", ioc->name, doorbell, count));
4155
4156                                 if (doorbell == MPI_IOC_STATE_READY) {
4157                                         break;
4158                                 }
4159
4160                                 /* wait 1 sec */
4161                                 if (sleepFlag == CAN_SLEEP) {
4162                                         msleep (1000);
4163                                 } else {
4164                                         mdelay (1000);
4165                                 }
4166                         }
4167
4168                         if (doorbell != MPI_IOC_STATE_READY)
4169                                 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4170                                     "after reset! IocState=%x", ioc->name,
4171                                     doorbell);
4172                 }
4173         }
4174
4175         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4176         if (ioc->debug_level & MPT_DEBUG) {
4177                 if (ioc->alt_ioc)
4178                         diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4179                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4180                         ioc->name, diag0val, diag1val));
4181         }
4182
4183         /* Clear RESET_HISTORY bit!  Place board in the
4184          * diagnostic mode to update the diag register.
4185          */
4186         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4187         count = 0;
4188         while ((diag0val & MPI_DIAG_DRWE) == 0) {
4189                 /* Write magic sequence to WriteSequence register
4190                  * Loop until in diagnostic mode
4191                  */
4192                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4193                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4194                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4195                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4196                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4197                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4198
4199                 /* wait 100 msec */
4200                 if (sleepFlag == CAN_SLEEP) {
4201                         msleep (100);
4202                 } else {
4203                         mdelay (100);
4204                 }
4205
4206                 count++;
4207                 if (count > 20) {
4208                         printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4209                                         ioc->name, diag0val);
4210                         break;
4211                 }
4212                 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4213         }
4214         diag0val &= ~MPI_DIAG_RESET_HISTORY;
4215         CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4216         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4217         if (diag0val & MPI_DIAG_RESET_HISTORY) {
4218                 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4219                                 ioc->name);
4220         }
4221
4222         /* Disable Diagnostic Mode
4223          */
4224         CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4225
4226         /* Check FW reload status flags.
4227          */
4228         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4229         if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4230                 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4231                                 ioc->name, diag0val);
4232                 return -3;
4233         }
4234
4235         if (ioc->debug_level & MPT_DEBUG) {
4236                 if (ioc->alt_ioc)
4237                         diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4238                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4239                         ioc->name, diag0val, diag1val));
4240         }
4241
4242         /*
4243          * Reset flag that says we've enabled event notification
4244          */
4245         ioc->facts.EventState = 0;
4246
4247         if (ioc->alt_ioc)
4248                 ioc->alt_ioc->facts.EventState = 0;
4249
4250         return hard_reset_done;
4251 }
4252
4253 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4254 /**
4255  *      SendIocReset - Send IOCReset request to MPT adapter.
4256  *      @ioc: Pointer to MPT_ADAPTER structure
4257  *      @reset_type: reset type, expected values are
4258  *      %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4259  *      @sleepFlag: Specifies whether the process can sleep
4260  *
4261  *      Send IOCReset request to the MPT adapter.
4262  *
4263  *      Returns 0 for success, non-zero for failure.
4264  */
4265 static int
4266 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4267 {
4268         int r;
4269         u32 state;
4270         int cntdn, count;
4271
4272         drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4273                         ioc->name, reset_type));
4274         CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4275         if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4276                 return r;
4277
4278         /* FW ACK'd request, wait for READY state
4279          */
4280         count = 0;
4281         cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15;    /* 15 seconds */
4282
4283         while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4284                 cntdn--;
4285                 count++;
4286                 if (!cntdn) {
4287                         if (sleepFlag != CAN_SLEEP)
4288                                 count *= 10;
4289
4290                         printk(MYIOC_s_ERR_FMT
4291                             "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4292                             ioc->name, state, (int)((count+5)/HZ));
4293                         return -ETIME;
4294                 }
4295
4296                 if (sleepFlag == CAN_SLEEP) {
4297                         msleep(1);
4298                 } else {
4299                         mdelay (1);     /* 1 msec delay */
4300                 }
4301         }
4302
4303         /* TODO!
4304          *  Cleanup all event stuff for this IOC; re-issue EventNotification
4305          *  request if needed.
4306          */
4307         if (ioc->facts.Function)
4308                 ioc->facts.EventState = 0;
4309
4310         return 0;
4311 }
4312
4313 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4314 /**
4315  *      initChainBuffers - Allocate memory for and initialize chain buffers
4316  *      @ioc: Pointer to MPT_ADAPTER structure
4317  *
4318  *      Allocates memory for and initializes chain buffers,
4319  *      chain buffer control arrays and spinlock.
4320  */
4321 static int
4322 initChainBuffers(MPT_ADAPTER *ioc)
4323 {
4324         u8              *mem;
4325         int             sz, ii, num_chain;
4326         int             scale, num_sge, numSGE;
4327
4328         /* ReqToChain size must equal the req_depth
4329          * index = req_idx
4330          */
4331         if (ioc->ReqToChain == NULL) {
4332                 sz = ioc->req_depth * sizeof(int);
4333                 mem = kmalloc(sz, GFP_ATOMIC);
4334                 if (mem == NULL)
4335                         return -1;
4336
4337                 ioc->ReqToChain = (int *) mem;
4338                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc  @ %p, sz=%d bytes\n",
4339                                 ioc->name, mem, sz));
4340                 mem = kmalloc(sz, GFP_ATOMIC);
4341                 if (mem == NULL)
4342                         return -1;
4343
4344                 ioc->RequestNB = (int *) mem;
4345                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc  @ %p, sz=%d bytes\n",
4346                                 ioc->name, mem, sz));
4347         }
4348         for (ii = 0; ii < ioc->req_depth; ii++) {
4349                 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4350         }
4351
4352         /* ChainToChain size must equal the total number
4353          * of chain buffers to be allocated.
4354          * index = chain_idx
4355          *
4356          * Calculate the number of chain buffers needed(plus 1) per I/O
4357          * then multiply the maximum number of simultaneous cmds
4358          *
4359          * num_sge = num sge in request frame + last chain buffer
4360          * scale = num sge per chain buffer if no chain element
4361          */
4362         scale = ioc->req_sz / ioc->SGE_size;
4363         if (ioc->sg_addr_size == sizeof(u64))
4364                 num_sge =  scale + (ioc->req_sz - 60) / ioc->SGE_size;
4365         else
4366                 num_sge =  1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4367
4368         if (ioc->sg_addr_size == sizeof(u64)) {
4369                 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4370                         (ioc->req_sz - 60) / ioc->SGE_size;
4371         } else {
4372                 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4373                     scale + (ioc->req_sz - 64) / ioc->SGE_size;
4374         }
4375         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4376                 ioc->name, num_sge, numSGE));
4377
4378         if (ioc->bus_type == FC) {
4379                 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4380                         numSGE = MPT_SCSI_FC_SG_DEPTH;
4381         } else {
4382                 if (numSGE > MPT_SCSI_SG_DEPTH)
4383                         numSGE = MPT_SCSI_SG_DEPTH;
4384         }
4385
4386         num_chain = 1;
4387         while (numSGE - num_sge > 0) {
4388                 num_chain++;
4389                 num_sge += (scale - 1);
4390         }
4391         num_chain++;
4392
4393         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4394                 ioc->name, numSGE, num_sge, num_chain));
4395
4396         if (ioc->bus_type == SPI)
4397                 num_chain *= MPT_SCSI_CAN_QUEUE;
4398         else if (ioc->bus_type == SAS)
4399                 num_chain *= MPT_SAS_CAN_QUEUE;
4400         else
4401                 num_chain *= MPT_FC_CAN_QUEUE;
4402
4403         ioc->num_chain = num_chain;
4404
4405         sz = num_chain * sizeof(int);
4406         if (ioc->ChainToChain == NULL) {
4407                 mem = kmalloc(sz, GFP_ATOMIC);
4408                 if (mem == NULL)
4409                         return -1;
4410
4411                 ioc->ChainToChain = (int *) mem;
4412                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4413                                 ioc->name, mem, sz));
4414         } else {
4415                 mem = (u8 *) ioc->ChainToChain;
4416         }
4417         memset(mem, 0xFF, sz);
4418         return num_chain;
4419 }
4420
4421 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4422 /**
4423  *      PrimeIocFifos - Initialize IOC request and reply FIFOs.
4424  *      @ioc: Pointer to MPT_ADAPTER structure
4425  *
4426  *      This routine allocates memory for the MPT reply and request frame
4427  *      pools (if necessary), and primes the IOC reply FIFO with
4428  *      reply frames.
4429  *
4430  *      Returns 0 for success, non-zero for failure.
4431  */
4432 static int
4433 PrimeIocFifos(MPT_ADAPTER *ioc)
4434 {
4435         MPT_FRAME_HDR *mf;
4436         unsigned long flags;
4437         dma_addr_t alloc_dma;
4438         u8 *mem;
4439         int i, reply_sz, sz, total_size, num_chain;
4440         u64     dma_mask;
4441
4442         dma_mask = 0;
4443
4444         /*  Prime reply FIFO...  */
4445
4446         if (ioc->reply_frames == NULL) {
4447                 if ( (num_chain = initChainBuffers(ioc)) < 0)
4448                         return -1;
4449                 /*
4450                  * 1078 errata workaround for the 36GB limitation
4451                  */
4452                 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4453                     ioc->dma_mask > DMA_BIT_MASK(35)) {
4454                         if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4455                             && !pci_set_consistent_dma_mask(ioc->pcidev,
4456                             DMA_BIT_MASK(32))) {
4457                                 dma_mask = DMA_BIT_MASK(35);
4458                                 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4459                                     "setting 35 bit addressing for "
4460                                     "Request/Reply/Chain and Sense Buffers\n",
4461                                     ioc->name));
4462                         } else {
4463                                 /*Reseting DMA mask to 64 bit*/
4464                                 pci_set_dma_mask(ioc->pcidev,
4465                                         DMA_BIT_MASK(64));
4466                                 pci_set_consistent_dma_mask(ioc->pcidev,
4467                                         DMA_BIT_MASK(64));
4468
4469                                 printk(MYIOC_s_ERR_FMT
4470                                     "failed setting 35 bit addressing for "
4471                                     "Request/Reply/Chain and Sense Buffers\n",
4472                                     ioc->name);
4473                                 return -1;
4474                         }
4475                 }
4476
4477                 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4478                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4479                                 ioc->name, ioc->reply_sz, ioc->reply_depth));
4480                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4481                                 ioc->name, reply_sz, reply_sz));
4482
4483                 sz = (ioc->req_sz * ioc->req_depth);
4484                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4485                                 ioc->name, ioc->req_sz, ioc->req_depth));
4486                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4487                                 ioc->name, sz, sz));
4488                 total_size += sz;
4489
4490                 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4491                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4492                                 ioc->name, ioc->req_sz, num_chain));
4493                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4494                                 ioc->name, sz, sz, num_chain));
4495
4496                 total_size += sz;
4497                 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
4498                 if (mem == NULL) {
4499                         printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4500                                 ioc->name);
4501                         goto out_fail;
4502                 }
4503
4504                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4505                                 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4506
4507                 memset(mem, 0, total_size);
4508                 ioc->alloc_total += total_size;
4509                 ioc->alloc = mem;
4510                 ioc->alloc_dma = alloc_dma;
4511                 ioc->alloc_sz = total_size;
4512                 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4513                 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4514
4515                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4516                         ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4517
4518                 alloc_dma += reply_sz;
4519                 mem += reply_sz;
4520
4521                 /*  Request FIFO - WE manage this!  */
4522
4523                 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4524                 ioc->req_frames_dma = alloc_dma;
4525
4526                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4527                                 ioc->name, mem, (void *)(ulong)alloc_dma));
4528
4529                 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4530
4531                 for (i = 0; i < ioc->req_depth; i++) {
4532                         alloc_dma += ioc->req_sz;
4533                         mem += ioc->req_sz;
4534                 }
4535
4536                 ioc->ChainBuffer = mem;
4537                 ioc->ChainBufferDMA = alloc_dma;
4538
4539                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4540                         ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4541
4542                 /* Initialize the free chain Q.
4543                 */
4544
4545                 INIT_LIST_HEAD(&ioc->FreeChainQ);
4546
4547                 /* Post the chain buffers to the FreeChainQ.
4548                 */
4549                 mem = (u8 *)ioc->ChainBuffer;
4550                 for (i=0; i < num_chain; i++) {
4551                         mf = (MPT_FRAME_HDR *) mem;
4552                         list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4553                         mem += ioc->req_sz;
4554                 }
4555
4556                 /* Initialize Request frames linked list
4557                  */
4558                 alloc_dma = ioc->req_frames_dma;
4559                 mem = (u8 *) ioc->req_frames;
4560
4561                 spin_lock_irqsave(&ioc->FreeQlock, flags);
4562                 INIT_LIST_HEAD(&ioc->FreeQ);
4563                 for (i = 0; i < ioc->req_depth; i++) {
4564                         mf = (MPT_FRAME_HDR *) mem;
4565
4566                         /*  Queue REQUESTs *internally*!  */
4567                         list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4568
4569                         mem += ioc->req_sz;
4570                 }
4571                 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4572
4573                 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4574                 ioc->sense_buf_pool =
4575                         pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
4576                 if (ioc->sense_buf_pool == NULL) {
4577                         printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4578                                 ioc->name);
4579                         goto out_fail;
4580                 }
4581
4582                 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4583                 ioc->alloc_total += sz;
4584                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4585                         ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4586
4587         }
4588
4589         /* Post Reply frames to FIFO
4590          */
4591         alloc_dma = ioc->alloc_dma;
4592         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4593                 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4594
4595         for (i = 0; i < ioc->reply_depth; i++) {
4596                 /*  Write each address to the IOC!  */
4597                 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4598                 alloc_dma += ioc->reply_sz;
4599         }
4600
4601         if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4602             ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4603             ioc->dma_mask))
4604                 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4605                     "restoring 64 bit addressing\n", ioc->name));
4606
4607         return 0;
4608
4609 out_fail:
4610
4611         if (ioc->alloc != NULL) {
4612                 sz = ioc->alloc_sz;
4613                 pci_free_consistent(ioc->pcidev,
4614                                 sz,
4615                                 ioc->alloc, ioc->alloc_dma);
4616                 ioc->reply_frames = NULL;
4617                 ioc->req_frames = NULL;
4618                 ioc->alloc_total -= sz;
4619         }
4620         if (ioc->sense_buf_pool != NULL) {
4621                 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4622                 pci_free_consistent(ioc->pcidev,
4623                                 sz,
4624                                 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
4625                 ioc->sense_buf_pool = NULL;
4626         }
4627
4628         if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4629             DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4630             DMA_BIT_MASK(64)))
4631                 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4632                     "restoring 64 bit addressing\n", ioc->name));
4633
4634         return -1;
4635 }
4636
4637 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4638 /**
4639  *      mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4640  *      from IOC via doorbell handshake method.
4641  *      @ioc: Pointer to MPT_ADAPTER structure
4642  *      @reqBytes: Size of the request in bytes
4643  *      @req: Pointer to MPT request frame
4644  *      @replyBytes: Expected size of the reply in bytes
4645  *      @u16reply: Pointer to area where reply should be written
4646  *      @maxwait: Max wait time for a reply (in seconds)
4647  *      @sleepFlag: Specifies whether the process can sleep
4648  *
4649  *      NOTES: It is the callers responsibility to byte-swap fields in the
4650  *      request which are greater than 1 byte in size.  It is also the
4651  *      callers responsibility to byte-swap response fields which are
4652  *      greater than 1 byte in size.
4653  *
4654  *      Returns 0 for success, non-zero for failure.
4655  */
4656 static int
4657 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4658                 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4659 {
4660         MPIDefaultReply_t *mptReply;
4661         int failcnt = 0;
4662         int t;
4663
4664         /*
4665          * Get ready to cache a handshake reply
4666          */
4667         ioc->hs_reply_idx = 0;
4668         mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4669         mptReply->MsgLength = 0;
4670
4671         /*
4672          * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4673          * then tell IOC that we want to handshake a request of N words.
4674          * (WRITE u32val to Doorbell reg).
4675          */
4676         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4677         CHIPREG_WRITE32(&ioc->chip->Doorbell,
4678                         ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4679                          ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4680
4681         /*
4682          * Wait for IOC's doorbell handshake int
4683          */
4684         if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4685                 failcnt++;
4686
4687         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4688                         ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4689
4690         /* Read doorbell and check for active bit */
4691         if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4692                         return -1;
4693
4694         /*
4695          * Clear doorbell int (WRITE 0 to IntStatus reg),
4696          * then wait for IOC to ACKnowledge that it's ready for
4697          * our handshake request.
4698          */
4699         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4700         if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4701                 failcnt++;
4702
4703         if (!failcnt) {
4704                 int      ii;
4705                 u8      *req_as_bytes = (u8 *) req;
4706
4707                 /*
4708                  * Stuff request words via doorbell handshake,
4709                  * with ACK from IOC for each.
4710                  */
4711                 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4712                         u32 word = ((req_as_bytes[(ii*4) + 0] <<  0) |
4713                                     (req_as_bytes[(ii*4) + 1] <<  8) |
4714                                     (req_as_bytes[(ii*4) + 2] << 16) |
4715                                     (req_as_bytes[(ii*4) + 3] << 24));
4716
4717                         CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4718                         if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4719                                 failcnt++;
4720                 }
4721
4722                 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4723                 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4724
4725                 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4726                                 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4727
4728                 /*
4729                  * Wait for completion of doorbell handshake reply from the IOC
4730                  */
4731                 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4732                         failcnt++;
4733
4734                 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4735                                 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4736
4737                 /*
4738                  * Copy out the cached reply...
4739                  */
4740                 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4741                         u16reply[ii] = ioc->hs_reply[ii];
4742         } else {
4743                 return -99;
4744         }
4745
4746         return -failcnt;
4747 }
4748
4749 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4750 /**
4751  *      WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4752  *      @ioc: Pointer to MPT_ADAPTER structure
4753  *      @howlong: How long to wait (in seconds)
4754  *      @sleepFlag: Specifies whether the process can sleep
4755  *
4756  *      This routine waits (up to ~2 seconds max) for IOC doorbell
4757  *      handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4758  *      bit in its IntStatus register being clear.
4759  *
4760  *      Returns a negative value on failure, else wait loop count.
4761  */
4762 static int
4763 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4764 {
4765         int cntdn;
4766         int count = 0;
4767         u32 intstat=0;
4768
4769         cntdn = 1000 * howlong;
4770
4771         if (sleepFlag == CAN_SLEEP) {
4772                 while (--cntdn) {
4773                         msleep (1);
4774                         intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4775                         if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4776                                 break;
4777                         count++;
4778                 }
4779         } else {
4780                 while (--cntdn) {
4781                         udelay (1000);
4782                         intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4783                         if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4784                                 break;
4785                         count++;
4786                 }
4787         }
4788
4789         if (cntdn) {
4790                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4791                                 ioc->name, count));
4792                 return count;
4793         }
4794
4795         printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4796                         ioc->name, count, intstat);
4797         return -1;
4798 }
4799
4800 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4801 /**
4802  *      WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4803  *      @ioc: Pointer to MPT_ADAPTER structure
4804  *      @howlong: How long to wait (in seconds)
4805  *      @sleepFlag: Specifies whether the process can sleep
4806  *
4807  *      This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4808  *      (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4809  *
4810  *      Returns a negative value on failure, else wait loop count.
4811  */
4812 static int
4813 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4814 {
4815         int cntdn;
4816         int count = 0;
4817         u32 intstat=0;
4818
4819         cntdn = 1000 * howlong;
4820         if (sleepFlag == CAN_SLEEP) {
4821                 while (--cntdn) {
4822                         intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4823                         if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4824                                 break;
4825                         msleep(1);
4826                         count++;
4827                 }
4828         } else {
4829                 while (--cntdn) {
4830                         intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4831                         if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4832                                 break;
4833                         udelay (1000);
4834                         count++;
4835                 }
4836         }
4837
4838         if (cntdn) {
4839                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4840                                 ioc->name, count, howlong));
4841                 return count;
4842         }
4843
4844         printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4845                         ioc->name, count, intstat);
4846         return -1;
4847 }
4848
4849 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4850 /**
4851  *      WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4852  *      @ioc: Pointer to MPT_ADAPTER structure
4853  *      @howlong: How long to wait (in seconds)
4854  *      @sleepFlag: Specifies whether the process can sleep
4855  *
4856  *      This routine polls the IOC for a handshake reply, 16 bits at a time.
4857  *      Reply is cached to IOC private area large enough to hold a maximum
4858  *      of 128 bytes of reply data.
4859  *
4860  *      Returns a negative value on failure, else size of reply in WORDS.
4861  */
4862 static int
4863 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4864 {
4865         int u16cnt = 0;
4866         int failcnt = 0;
4867         int t;
4868         u16 *hs_reply = ioc->hs_reply;
4869         volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4870         u16 hword;
4871
4872         hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4873
4874         /*
4875          * Get first two u16's so we can look at IOC's intended reply MsgLength
4876          */
4877         u16cnt=0;
4878         if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4879                 failcnt++;
4880         } else {
4881                 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4882                 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4883                 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4884                         failcnt++;
4885                 else {
4886                         hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4887                         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4888                 }
4889         }
4890
4891         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4892                         ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4893                         failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4894
4895         /*
4896          * If no error (and IOC said MsgLength is > 0), piece together
4897          * reply 16 bits at a time.
4898          */
4899         for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4900                 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4901                         failcnt++;
4902                 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4903                 /* don't overflow our IOC hs_reply[] buffer! */
4904                 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4905                         hs_reply[u16cnt] = hword;
4906                 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4907         }
4908
4909         if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4910                 failcnt++;
4911         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4912
4913         if (failcnt) {
4914                 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4915                                 ioc->name);
4916                 return -failcnt;
4917         }
4918 #if 0
4919         else if (u16cnt != (2 * mptReply->MsgLength)) {
4920                 return -101;
4921         }
4922         else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4923                 return -102;
4924         }
4925 #endif
4926
4927         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4928         DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4929
4930         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4931                         ioc->name, t, u16cnt/2));
4932         return u16cnt/2;
4933 }
4934
4935 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4936 /**
4937  *      GetLanConfigPages - Fetch LANConfig pages.
4938  *      @ioc: Pointer to MPT_ADAPTER structure
4939  *
4940  *      Return: 0 for success
4941  *      -ENOMEM if no memory available
4942  *              -EPERM if not allowed due to ISR context
4943  *              -EAGAIN if no msg frames currently available
4944  *              -EFAULT for non-successful reply or no reply (timeout)
4945  */
4946 static int
4947 GetLanConfigPages(MPT_ADAPTER *ioc)
4948 {
4949         ConfigPageHeader_t       hdr;
4950         CONFIGPARMS              cfg;
4951         LANPage0_t              *ppage0_alloc;
4952         dma_addr_t               page0_dma;
4953         LANPage1_t              *ppage1_alloc;
4954         dma_addr_t               page1_dma;
4955         int                      rc = 0;
4956         int                      data_sz;
4957         int                      copy_sz;
4958
4959         /* Get LAN Page 0 header */
4960         hdr.PageVersion = 0;
4961         hdr.PageLength = 0;
4962         hdr.PageNumber = 0;
4963         hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4964         cfg.cfghdr.hdr = &hdr;
4965         cfg.physAddr = -1;
4966         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4967         cfg.dir = 0;
4968         cfg.pageAddr = 0;
4969         cfg.timeout = 0;
4970
4971         if ((rc = mpt_config(ioc, &cfg)) != 0)
4972                 return rc;
4973
4974         if (hdr.PageLength > 0) {
4975                 data_sz = hdr.PageLength * 4;
4976                 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4977                 rc = -ENOMEM;
4978                 if (ppage0_alloc) {
4979                         memset((u8 *)ppage0_alloc, 0, data_sz);
4980                         cfg.physAddr = page0_dma;
4981                         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4982
4983                         if ((rc = mpt_config(ioc, &cfg)) == 0) {
4984                                 /* save the data */
4985                                 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4986                                 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4987
4988                         }
4989
4990                         pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4991
4992                         /* FIXME!
4993                          *      Normalize endianness of structure data,
4994                          *      by byte-swapping all > 1 byte fields!
4995                          */
4996
4997                 }
4998
4999                 if (rc)
5000                         return rc;
5001         }
5002
5003         /* Get LAN Page 1 header */
5004         hdr.PageVersion = 0;
5005         hdr.PageLength = 0;
5006         hdr.PageNumber = 1;
5007         hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5008         cfg.cfghdr.hdr = &hdr;
5009         cfg.physAddr = -1;
5010         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5011         cfg.dir = 0;
5012         cfg.pageAddr = 0;
5013
5014         if ((rc = mpt_config(ioc, &cfg)) != 0)
5015                 return rc;
5016
5017         if (hdr.PageLength == 0)
5018                 return 0;
5019
5020         data_sz = hdr.PageLength * 4;
5021         rc = -ENOMEM;
5022         ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5023         if (ppage1_alloc) {
5024                 memset((u8 *)ppage1_alloc, 0, data_sz);
5025                 cfg.physAddr = page1_dma;
5026                 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5027
5028                 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5029                         /* save the data */
5030                         copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5031                         memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5032                 }
5033
5034                 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5035
5036                 /* FIXME!
5037                  *      Normalize endianness of structure data,
5038                  *      by byte-swapping all > 1 byte fields!
5039                  */
5040
5041         }
5042
5043         return rc;
5044 }
5045
5046 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5047 /**
5048  *      mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5049  *      @ioc: Pointer to MPT_ADAPTER structure
5050  *      @persist_opcode: see below
5051  *
5052  *      MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
5053  *              devices not currently present.
5054  *      MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
5055  *
5056  *      NOTE: Don't use not this function during interrupt time.
5057  *
5058  *      Returns 0 for success, non-zero error
5059  */
5060
5061 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5062 int
5063 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5064 {
5065         SasIoUnitControlRequest_t       *sasIoUnitCntrReq;
5066         SasIoUnitControlReply_t         *sasIoUnitCntrReply;
5067         MPT_FRAME_HDR                   *mf = NULL;
5068         MPIHeader_t                     *mpi_hdr;
5069         int                             ret = 0;
5070         unsigned long                   timeleft;
5071
5072         mutex_lock(&ioc->mptbase_cmds.mutex);
5073
5074         /* init the internal cmd struct */
5075         memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5076         INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5077
5078         /* insure garbage is not sent to fw */
5079         switch(persist_opcode) {
5080
5081         case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5082         case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5083                 break;
5084
5085         default:
5086                 ret = -1;
5087                 goto out;
5088         }
5089
5090         printk(KERN_DEBUG  "%s: persist_opcode=%x\n",
5091                 __func__, persist_opcode);
5092
5093         /* Get a MF for this command.
5094          */
5095         if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5096                 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5097                 ret = -1;
5098                 goto out;
5099         }
5100
5101         mpi_hdr = (MPIHeader_t *) mf;
5102         sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5103         memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5104         sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5105         sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5106         sasIoUnitCntrReq->Operation = persist_opcode;
5107
5108         mpt_put_msg_frame(mpt_base_index, ioc, mf);
5109         timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5110         if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5111                 ret = -ETIME;
5112                 printk(KERN_DEBUG "%s: failed\n", __func__);
5113                 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5114                         goto out;
5115                 if (!timeleft) {
5116                         printk(MYIOC_s_WARN_FMT
5117                                "Issuing Reset from %s!!, doorbell=0x%08x\n",
5118                                ioc->name, __func__, mpt_GetIocState(ioc, 0));
5119                         mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5120                         mpt_free_msg_frame(ioc, mf);
5121                 }
5122                 goto out;
5123         }
5124
5125         if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5126                 ret = -1;
5127                 goto out;
5128         }
5129
5130         sasIoUnitCntrReply =
5131             (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5132         if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5133                 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5134                     __func__, sasIoUnitCntrReply->IOCStatus,
5135                     sasIoUnitCntrReply->IOCLogInfo);
5136                 printk(KERN_DEBUG "%s: failed\n", __func__);
5137                 ret = -1;
5138         } else
5139                 printk(KERN_DEBUG "%s: success\n", __func__);
5140  out:
5141
5142         CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5143         mutex_unlock(&ioc->mptbase_cmds.mutex);
5144         return ret;
5145 }
5146
5147 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5148
5149 static void
5150 mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5151     MpiEventDataRaid_t * pRaidEventData)
5152 {
5153         int     volume;
5154         int     reason;
5155         int     disk;
5156         int     status;
5157         int     flags;
5158         int     state;
5159
5160         volume  = pRaidEventData->VolumeID;
5161         reason  = pRaidEventData->ReasonCode;
5162         disk    = pRaidEventData->PhysDiskNum;
5163         status  = le32_to_cpu(pRaidEventData->SettingsStatus);
5164         flags   = (status >> 0) & 0xff;
5165         state   = (status >> 8) & 0xff;
5166
5167         if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5168                 return;
5169         }
5170
5171         if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5172              reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5173             (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5174                 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5175                         ioc->name, disk, volume);
5176         } else {
5177                 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5178                         ioc->name, volume);
5179         }
5180
5181         switch(reason) {
5182         case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5183                 printk(MYIOC_s_INFO_FMT "  volume has been created\n",
5184                         ioc->name);
5185                 break;
5186
5187         case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5188
5189                 printk(MYIOC_s_INFO_FMT "  volume has been deleted\n",
5190                         ioc->name);
5191                 break;
5192
5193         case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5194                 printk(MYIOC_s_INFO_FMT "  volume settings have been changed\n",
5195                         ioc->name);
5196                 break;
5197
5198         case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5199                 printk(MYIOC_s_INFO_FMT "  volume is now %s%s%s%s\n",
5200                         ioc->name,
5201                         state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5202                          ? "optimal"
5203                          : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5204                           ? "degraded"
5205                           : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5206                            ? "failed"
5207                            : "state unknown",
5208                         flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5209                          ? ", enabled" : "",
5210                         flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5211                          ? ", quiesced" : "",
5212                         flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5213                          ? ", resync in progress" : "" );
5214                 break;
5215
5216         case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5217                 printk(MYIOC_s_INFO_FMT "  volume membership of PhysDisk %d has changed\n",
5218                         ioc->name, disk);
5219                 break;
5220
5221         case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5222                 printk(MYIOC_s_INFO_FMT "  PhysDisk has been created\n",
5223                         ioc->name);
5224                 break;
5225
5226         case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5227                 printk(MYIOC_s_INFO_FMT "  PhysDisk has been deleted\n",
5228                         ioc->name);
5229                 break;
5230
5231         case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5232                 printk(MYIOC_s_INFO_FMT "  PhysDisk settings have been changed\n",
5233                         ioc->name);
5234                 break;
5235
5236         case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5237                 printk(MYIOC_s_INFO_FMT "  PhysDisk is now %s%s%s\n",
5238                         ioc->name,
5239                         state == MPI_PHYSDISK0_STATUS_ONLINE
5240                          ? "online"
5241                          : state == MPI_PHYSDISK0_STATUS_MISSING
5242                           ? "missing"
5243                           : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5244                            ? "not compatible"
5245                            : state == MPI_PHYSDISK0_STATUS_FAILED
5246                             ? "failed"
5247                             : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5248                              ? "initializing"
5249                              : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5250                               ? "offline requested"
5251                               : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5252                                ? "failed requested"
5253                                : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5254                                 ? "offline"
5255                                 : "state unknown",
5256                         flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5257                          ? ", out of sync" : "",
5258                         flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5259                          ? ", quiesced" : "" );
5260                 break;
5261
5262         case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5263                 printk(MYIOC_s_INFO_FMT "  Domain Validation needed for PhysDisk %d\n",
5264                         ioc->name, disk);
5265                 break;
5266
5267         case MPI_EVENT_RAID_RC_SMART_DATA:
5268                 printk(MYIOC_s_INFO_FMT "  SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5269                         ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5270                 break;
5271
5272         case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5273                 printk(MYIOC_s_INFO_FMT "  replacement of PhysDisk %d has started\n",
5274                         ioc->name, disk);
5275                 break;
5276         }
5277 }
5278
5279 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5280 /**
5281  *      GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5282  *      @ioc: Pointer to MPT_ADAPTER structure
5283  *
5284  *      Returns: 0 for success
5285  *      -ENOMEM if no memory available
5286  *              -EPERM if not allowed due to ISR context
5287  *              -EAGAIN if no msg frames currently available
5288  *              -EFAULT for non-successful reply or no reply (timeout)
5289  */
5290 static int
5291 GetIoUnitPage2(MPT_ADAPTER *ioc)
5292 {
5293         ConfigPageHeader_t       hdr;
5294         CONFIGPARMS              cfg;
5295         IOUnitPage2_t           *ppage_alloc;
5296         dma_addr_t               page_dma;
5297         int                      data_sz;
5298         int                      rc;
5299
5300         /* Get the page header */
5301         hdr.PageVersion = 0;
5302         hdr.PageLength = 0;
5303         hdr.PageNumber = 2;
5304         hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5305         cfg.cfghdr.hdr = &hdr;
5306         cfg.physAddr = -1;
5307         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5308         cfg.dir = 0;
5309         cfg.pageAddr = 0;
5310         cfg.timeout = 0;
5311
5312         if ((rc = mpt_config(ioc, &cfg)) != 0)
5313                 return rc;
5314
5315         if (hdr.PageLength == 0)
5316                 return 0;
5317
5318         /* Read the config page */
5319         data_sz = hdr.PageLength * 4;
5320         rc = -ENOMEM;
5321         ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5322         if (ppage_alloc) {
5323                 memset((u8 *)ppage_alloc, 0, data_sz);
5324                 cfg.physAddr = page_dma;
5325                 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5326
5327                 /* If Good, save data */
5328                 if ((rc = mpt_config(ioc, &cfg)) == 0)
5329                         ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5330
5331                 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5332         }
5333
5334         return rc;
5335 }
5336
5337 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5338 /**
5339  *      mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5340  *      @ioc: Pointer to a Adapter Strucutre
5341  *      @portnum: IOC port number
5342  *
5343  *      Return: -EFAULT if read of config page header fails
5344  *                      or if no nvram
5345  *      If read of SCSI Port Page 0 fails,
5346  *              NVRAM = MPT_HOST_NVRAM_INVALID  (0xFFFFFFFF)
5347  *              Adapter settings: async, narrow
5348  *              Return 1
5349  *      If read of SCSI Port Page 2 fails,
5350  *              Adapter settings valid
5351  *              NVRAM = MPT_HOST_NVRAM_INVALID  (0xFFFFFFFF)
5352  *              Return 1
5353  *      Else
5354  *              Both valid
5355  *              Return 0
5356  *      CHECK - what type of locking mechanisms should be used????
5357  */
5358 static int
5359 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5360 {
5361         u8                      *pbuf;
5362         dma_addr_t               buf_dma;
5363         CONFIGPARMS              cfg;
5364         ConfigPageHeader_t       header;
5365         int                      ii;
5366         int                      data, rc = 0;
5367
5368         /* Allocate memory
5369          */
5370         if (!ioc->spi_data.nvram) {
5371                 int      sz;
5372                 u8      *mem;
5373                 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5374                 mem = kmalloc(sz, GFP_ATOMIC);
5375                 if (mem == NULL)
5376                         return -EFAULT;
5377
5378                 ioc->spi_data.nvram = (int *) mem;
5379
5380                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5381                         ioc->name, ioc->spi_data.nvram, sz));
5382         }
5383
5384         /* Invalidate NVRAM information
5385          */
5386         for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5387                 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5388         }
5389
5390         /* Read SPP0 header, allocate memory, then read page.
5391          */
5392         header.PageVersion = 0;
5393         header.PageLength = 0;
5394         header.PageNumber = 0;
5395         header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5396         cfg.cfghdr.hdr = &header;
5397         cfg.physAddr = -1;
5398         cfg.pageAddr = portnum;
5399         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5400         cfg.dir = 0;
5401         cfg.timeout = 0;        /* use default */
5402         if (mpt_config(ioc, &cfg) != 0)
5403                  return -EFAULT;
5404
5405         if (header.PageLength > 0) {
5406                 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5407                 if (pbuf) {
5408                         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5409                         cfg.physAddr = buf_dma;
5410                         if (mpt_config(ioc, &cfg) != 0) {
5411                                 ioc->spi_data.maxBusWidth = MPT_NARROW;
5412                                 ioc->spi_data.maxSyncOffset = 0;
5413                                 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5414                                 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5415                                 rc = 1;
5416                                 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5417                                         "Unable to read PortPage0 minSyncFactor=%x\n",
5418                                         ioc->name, ioc->spi_data.minSyncFactor));
5419                         } else {
5420                                 /* Save the Port Page 0 data
5421                                  */
5422                                 SCSIPortPage0_t  *pPP0 = (SCSIPortPage0_t  *) pbuf;
5423                                 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5424                                 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5425
5426                                 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5427                                         ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5428                                         ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5429                                                 "noQas due to Capabilities=%x\n",
5430                                                 ioc->name, pPP0->Capabilities));
5431                                 }
5432                                 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5433                                 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5434                                 if (data) {
5435                                         ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5436                                         data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5437                                         ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5438                                         ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5439                                                 "PortPage0 minSyncFactor=%x\n",
5440                                                 ioc->name, ioc->spi_data.minSyncFactor));
5441                                 } else {
5442                                         ioc->spi_data.maxSyncOffset = 0;
5443                                         ioc->spi_data.minSyncFactor = MPT_ASYNC;
5444                                 }
5445
5446                                 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5447
5448                                 /* Update the minSyncFactor based on bus type.
5449                                  */
5450                                 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5451                                         (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE))  {
5452
5453                                         if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5454                                                 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5455                                                 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5456                                                         "HVD or SE detected, minSyncFactor=%x\n",
5457                                                         ioc->name, ioc->spi_data.minSyncFactor));
5458                                         }
5459                                 }
5460                         }
5461                         if (pbuf) {
5462                                 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5463                         }
5464                 }
5465         }
5466
5467         /* SCSI Port Page 2 - Read the header then the page.
5468          */
5469         header.PageVersion = 0;
5470         header.PageLength = 0;
5471         header.PageNumber = 2;
5472         header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5473         cfg.cfghdr.hdr = &header;
5474         cfg.physAddr = -1;
5475         cfg.pageAddr = portnum;
5476         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5477         cfg.dir = 0;
5478         if (mpt_config(ioc, &cfg) != 0)
5479                 return -EFAULT;
5480
5481         if (header.PageLength > 0) {
5482                 /* Allocate memory and read SCSI Port Page 2
5483                  */
5484                 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5485                 if (pbuf) {
5486                         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5487                         cfg.physAddr = buf_dma;
5488                         if (mpt_config(ioc, &cfg) != 0) {
5489                                 /* Nvram data is left with INVALID mark
5490                                  */
5491                                 rc = 1;
5492                         } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5493
5494                                 /* This is an ATTO adapter, read Page2 accordingly
5495                                 */
5496                                 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t  *) pbuf;
5497                                 ATTODeviceInfo_t *pdevice = NULL;
5498                                 u16 ATTOFlags;
5499
5500                                 /* Save the Port Page 2 data
5501                                  * (reformat into a 32bit quantity)
5502                                  */
5503                                 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5504                                   pdevice = &pPP2->DeviceSettings[ii];
5505                                   ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5506                                   data = 0;
5507
5508                                   /* Translate ATTO device flags to LSI format
5509                                    */
5510                                   if (ATTOFlags & ATTOFLAG_DISC)
5511                                     data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5512                                   if (ATTOFlags & ATTOFLAG_ID_ENB)
5513                                     data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5514                                   if (ATTOFlags & ATTOFLAG_LUN_ENB)
5515                                     data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5516                                   if (ATTOFlags & ATTOFLAG_TAGGED)
5517                                     data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5518                                   if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5519                                     data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5520
5521                                   data = (data << 16) | (pdevice->Period << 8) | 10;
5522                                   ioc->spi_data.nvram[ii] = data;
5523                                 }
5524                         } else {
5525                                 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t  *) pbuf;
5526                                 MpiDeviceInfo_t *pdevice = NULL;
5527
5528                                 /*
5529                                  * Save "Set to Avoid SCSI Bus Resets" flag
5530                                  */
5531                                 ioc->spi_data.bus_reset =
5532                                     (le32_to_cpu(pPP2->PortFlags) &
5533                                 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5534                                     0 : 1 ;
5535
5536                                 /* Save the Port Page 2 data
5537                                  * (reformat into a 32bit quantity)
5538                                  */
5539                                 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5540                                 ioc->spi_data.PortFlags = data;
5541                                 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5542                                         pdevice = &pPP2->DeviceSettings[ii];
5543                                         data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5544                                                 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5545                                         ioc->spi_data.nvram[ii] = data;
5546                                 }
5547                         }
5548
5549                         pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5550                 }
5551         }
5552
5553         /* Update Adapter limits with those from NVRAM
5554          * Comment: Don't need to do this. Target performance
5555          * parameters will never exceed the adapters limits.
5556          */
5557
5558         return rc;
5559 }
5560
5561 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5562 /**
5563  *      mpt_readScsiDevicePageHeaders - save version and length of SDP1
5564  *      @ioc: Pointer to a Adapter Strucutre
5565  *      @portnum: IOC port number
5566  *
5567  *      Return: -EFAULT if read of config page header fails
5568  *              or 0 if success.
5569  */
5570 static int
5571 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5572 {
5573         CONFIGPARMS              cfg;
5574         ConfigPageHeader_t       header;
5575
5576         /* Read the SCSI Device Page 1 header
5577          */
5578         header.PageVersion = 0;
5579         header.PageLength = 0;
5580         header.PageNumber = 1;
5581         header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5582         cfg.cfghdr.hdr = &header;
5583         cfg.physAddr = -1;
5584         cfg.pageAddr = portnum;
5585         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5586         cfg.dir = 0;
5587         cfg.timeout = 0;
5588         if (mpt_config(ioc, &cfg) != 0)
5589                  return -EFAULT;
5590
5591         ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5592         ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5593
5594         header.PageVersion = 0;
5595         header.PageLength = 0;
5596         header.PageNumber = 0;
5597         header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5598         if (mpt_config(ioc, &cfg) != 0)
5599                  return -EFAULT;
5600
5601         ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5602         ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5603
5604         dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5605                         ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5606
5607         dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5608                         ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5609         return 0;
5610 }
5611
5612 /**
5613  * mpt_inactive_raid_list_free - This clears this link list.
5614  * @ioc : pointer to per adapter structure
5615  **/
5616 static void
5617 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5618 {
5619         struct inactive_raid_component_info *component_info, *pNext;
5620
5621         if (list_empty(&ioc->raid_data.inactive_list))
5622                 return;
5623
5624         mutex_lock(&ioc->raid_data.inactive_list_mutex);
5625         list_for_each_entry_safe(component_info, pNext,
5626             &ioc->raid_data.inactive_list, list) {
5627                 list_del(&component_info->list);
5628                 kfree(component_info);
5629         }
5630         mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5631 }
5632
5633 /**
5634  * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5635  *
5636  * @ioc : pointer to per adapter structure
5637  * @channel : volume channel
5638  * @id : volume target id
5639  **/
5640 static void
5641 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5642 {
5643         CONFIGPARMS                     cfg;
5644         ConfigPageHeader_t              hdr;
5645         dma_addr_t                      dma_handle;
5646         pRaidVolumePage0_t              buffer = NULL;
5647         int                             i;
5648         RaidPhysDiskPage0_t             phys_disk;
5649         struct inactive_raid_component_info *component_info;
5650         int                             handle_inactive_volumes;
5651
5652         memset(&cfg, 0 , sizeof(CONFIGPARMS));
5653         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5654         hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5655         cfg.pageAddr = (channel << 8) + id;
5656         cfg.cfghdr.hdr = &hdr;
5657         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5658
5659         if (mpt_config(ioc, &cfg) != 0)
5660                 goto out;
5661
5662         if (!hdr.PageLength)
5663                 goto out;
5664
5665         buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5666             &dma_handle);
5667
5668         if (!buffer)
5669                 goto out;
5670
5671         cfg.physAddr = dma_handle;
5672         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5673
5674         if (mpt_config(ioc, &cfg) != 0)
5675                 goto out;
5676
5677         if (!buffer->NumPhysDisks)
5678                 goto out;
5679
5680         handle_inactive_volumes =
5681            (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5682            (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5683             buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5684             buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5685
5686         if (!handle_inactive_volumes)
5687                 goto out;
5688
5689         mutex_lock(&ioc->raid_data.inactive_list_mutex);
5690         for (i = 0; i < buffer->NumPhysDisks; i++) {
5691                 if(mpt_raid_phys_disk_pg0(ioc,
5692                     buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5693                         continue;
5694
5695                 if ((component_info = kmalloc(sizeof (*component_info),
5696                  GFP_KERNEL)) == NULL)
5697                         continue;
5698
5699                 component_info->volumeID = id;
5700                 component_info->volumeBus = channel;
5701                 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5702                 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5703                 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5704                 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5705
5706                 list_add_tail(&component_info->list,
5707                     &ioc->raid_data.inactive_list);
5708         }
5709         mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5710
5711  out:
5712         if (buffer)
5713                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5714                     dma_handle);
5715 }
5716
5717 /**
5718  *      mpt_raid_phys_disk_pg0 - returns phys disk page zero
5719  *      @ioc: Pointer to a Adapter Structure
5720  *      @phys_disk_num: io unit unique phys disk num generated by the ioc
5721  *      @phys_disk: requested payload data returned
5722  *
5723  *      Return:
5724  *      0 on success
5725  *      -EFAULT if read of config page header fails or data pointer not NULL
5726  *      -ENOMEM if pci_alloc failed
5727  **/
5728 int
5729 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5730                         RaidPhysDiskPage0_t *phys_disk)
5731 {
5732         CONFIGPARMS                     cfg;
5733         ConfigPageHeader_t              hdr;
5734         dma_addr_t                      dma_handle;
5735         pRaidPhysDiskPage0_t            buffer = NULL;
5736         int                             rc;
5737
5738         memset(&cfg, 0 , sizeof(CONFIGPARMS));
5739         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5740         memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5741
5742         hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5743         hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5744         cfg.cfghdr.hdr = &hdr;
5745         cfg.physAddr = -1;
5746         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5747
5748         if (mpt_config(ioc, &cfg) != 0) {
5749                 rc = -EFAULT;
5750                 goto out;
5751         }
5752
5753         if (!hdr.PageLength) {
5754                 rc = -EFAULT;
5755                 goto out;
5756         }
5757
5758         buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5759             &dma_handle);
5760
5761         if (!buffer) {
5762                 rc = -ENOMEM;
5763                 goto out;
5764         }
5765
5766         cfg.physAddr = dma_handle;
5767         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5768         cfg.pageAddr = phys_disk_num;
5769
5770         if (mpt_config(ioc, &cfg) != 0) {
5771                 rc = -EFAULT;
5772                 goto out;
5773         }
5774
5775         rc = 0;
5776         memcpy(phys_disk, buffer, sizeof(*buffer));
5777         phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5778
5779  out:
5780
5781         if (buffer)
5782                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5783                     dma_handle);
5784
5785         return rc;
5786 }
5787
5788 /**
5789  *      mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5790  *      @ioc: Pointer to a Adapter Structure
5791  *      @phys_disk_num: io unit unique phys disk num generated by the ioc
5792  *
5793  *      Return:
5794  *      returns number paths
5795  **/
5796 int
5797 mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5798 {
5799         CONFIGPARMS                     cfg;
5800         ConfigPageHeader_t              hdr;
5801         dma_addr_t                      dma_handle;
5802         pRaidPhysDiskPage1_t            buffer = NULL;
5803         int                             rc;
5804
5805         memset(&cfg, 0 , sizeof(CONFIGPARMS));
5806         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5807
5808         hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5809         hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5810         hdr.PageNumber = 1;
5811         cfg.cfghdr.hdr = &hdr;
5812         cfg.physAddr = -1;
5813         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5814
5815         if (mpt_config(ioc, &cfg) != 0) {
5816                 rc = 0;
5817                 goto out;
5818         }
5819
5820         if (!hdr.PageLength) {
5821                 rc = 0;
5822                 goto out;
5823         }
5824
5825         buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5826             &dma_handle);
5827
5828         if (!buffer) {
5829                 rc = 0;
5830                 goto out;
5831         }
5832
5833         cfg.physAddr = dma_handle;
5834         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5835         cfg.pageAddr = phys_disk_num;
5836
5837         if (mpt_config(ioc, &cfg) != 0) {
5838                 rc = 0;
5839                 goto out;
5840         }
5841
5842         rc = buffer->NumPhysDiskPaths;
5843  out:
5844
5845         if (buffer)
5846                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5847                     dma_handle);
5848
5849         return rc;
5850 }
5851 EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5852
5853 /**
5854  *      mpt_raid_phys_disk_pg1 - returns phys disk page 1
5855  *      @ioc: Pointer to a Adapter Structure
5856  *      @phys_disk_num: io unit unique phys disk num generated by the ioc
5857  *      @phys_disk: requested payload data returned
5858  *
5859  *      Return:
5860  *      0 on success
5861  *      -EFAULT if read of config page header fails or data pointer not NULL
5862  *      -ENOMEM if pci_alloc failed
5863  **/
5864 int
5865 mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5866                 RaidPhysDiskPage1_t *phys_disk)
5867 {
5868         CONFIGPARMS                     cfg;
5869         ConfigPageHeader_t              hdr;
5870         dma_addr_t                      dma_handle;
5871         pRaidPhysDiskPage1_t            buffer = NULL;
5872         int                             rc;
5873         int                             i;
5874         __le64                          sas_address;
5875
5876         memset(&cfg, 0 , sizeof(CONFIGPARMS));
5877         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5878         rc = 0;
5879
5880         hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5881         hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5882         hdr.PageNumber = 1;
5883         cfg.cfghdr.hdr = &hdr;
5884         cfg.physAddr = -1;
5885         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5886
5887         if (mpt_config(ioc, &cfg) != 0) {
5888                 rc = -EFAULT;
5889                 goto out;
5890         }
5891
5892         if (!hdr.PageLength) {
5893                 rc = -EFAULT;
5894                 goto out;
5895         }
5896
5897         buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5898             &dma_handle);
5899
5900         if (!buffer) {
5901                 rc = -ENOMEM;
5902                 goto out;
5903         }
5904
5905         cfg.physAddr = dma_handle;
5906         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5907         cfg.pageAddr = phys_disk_num;
5908
5909         if (mpt_config(ioc, &cfg) != 0) {
5910                 rc = -EFAULT;
5911                 goto out;
5912         }
5913
5914         phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5915         phys_disk->PhysDiskNum = phys_disk_num;
5916         for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5917                 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5918                 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5919                 phys_disk->Path[i].OwnerIdentifier =
5920                                 buffer->Path[i].OwnerIdentifier;
5921                 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5922                 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5923                 sas_address = le64_to_cpu(sas_address);
5924                 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5925                 memcpy(&sas_address,
5926                                 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5927                 sas_address = le64_to_cpu(sas_address);
5928                 memcpy(&phys_disk->Path[i].OwnerWWID,
5929                                 &sas_address, sizeof(__le64));
5930         }
5931
5932  out:
5933
5934         if (buffer)
5935                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5936                     dma_handle);
5937
5938         return rc;
5939 }
5940 EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5941
5942
5943 /**
5944  *      mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5945  *      @ioc: Pointer to a Adapter Strucutre
5946  *
5947  *      Return:
5948  *      0 on success
5949  *      -EFAULT if read of config page header fails or data pointer not NULL
5950  *      -ENOMEM if pci_alloc failed
5951  **/
5952 int
5953 mpt_findImVolumes(MPT_ADAPTER *ioc)
5954 {
5955         IOCPage2_t              *pIoc2;
5956         u8                      *mem;
5957         dma_addr_t               ioc2_dma;
5958         CONFIGPARMS              cfg;
5959         ConfigPageHeader_t       header;
5960         int                      rc = 0;
5961         int                      iocpage2sz;
5962         int                      i;
5963
5964         if (!ioc->ir_firmware)
5965                 return 0;
5966
5967         /* Free the old page
5968          */
5969         kfree(ioc->raid_data.pIocPg2);
5970         ioc->raid_data.pIocPg2 = NULL;
5971         mpt_inactive_raid_list_free(ioc);
5972
5973         /* Read IOCP2 header then the page.
5974          */
5975         header.PageVersion = 0;
5976         header.PageLength = 0;
5977         header.PageNumber = 2;
5978         header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5979         cfg.cfghdr.hdr = &header;
5980         cfg.physAddr = -1;
5981         cfg.pageAddr = 0;
5982         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5983         cfg.dir = 0;
5984         cfg.timeout = 0;
5985         if (mpt_config(ioc, &cfg) != 0)
5986                  return -EFAULT;
5987
5988         if (header.PageLength == 0)
5989                 return -EFAULT;
5990
5991         iocpage2sz = header.PageLength * 4;
5992         pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5993         if (!pIoc2)
5994                 return -ENOMEM;
5995
5996         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5997         cfg.physAddr = ioc2_dma;
5998         if (mpt_config(ioc, &cfg) != 0)
5999                 goto out;
6000
6001         mem = kmalloc(iocpage2sz, GFP_KERNEL);
6002         if (!mem) {
6003                 rc = -ENOMEM;
6004                 goto out;
6005         }
6006
6007         memcpy(mem, (u8 *)pIoc2, iocpage2sz);
6008         ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6009
6010         mpt_read_ioc_pg_3(ioc);
6011
6012         for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6013                 mpt_inactive_raid_volumes(ioc,
6014                     pIoc2->RaidVolume[i].VolumeBus,
6015                     pIoc2->RaidVolume[i].VolumeID);
6016
6017  out:
6018         pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6019
6020         return rc;
6021 }
6022
6023 static int
6024 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6025 {
6026         IOCPage3_t              *pIoc3;
6027         u8                      *mem;
6028         CONFIGPARMS              cfg;
6029         ConfigPageHeader_t       header;
6030         dma_addr_t               ioc3_dma;
6031         int                      iocpage3sz = 0;
6032
6033         /* Free the old page
6034          */
6035         kfree(ioc->raid_data.pIocPg3);
6036         ioc->raid_data.pIocPg3 = NULL;
6037
6038         /* There is at least one physical disk.
6039          * Read and save IOC Page 3
6040          */
6041         header.PageVersion = 0;
6042         header.PageLength = 0;
6043         header.PageNumber = 3;
6044         header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6045         cfg.cfghdr.hdr = &header;
6046         cfg.physAddr = -1;
6047         cfg.pageAddr = 0;
6048         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6049         cfg.dir = 0;
6050         cfg.timeout = 0;
6051         if (mpt_config(ioc, &cfg) != 0)
6052                 return 0;
6053
6054         if (header.PageLength == 0)
6055                 return 0;
6056
6057         /* Read Header good, alloc memory
6058          */
6059         iocpage3sz = header.PageLength * 4;
6060         pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6061         if (!pIoc3)
6062                 return 0;
6063
6064         /* Read the Page and save the data
6065          * into malloc'd memory.
6066          */
6067         cfg.physAddr = ioc3_dma;
6068         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6069         if (mpt_config(ioc, &cfg) == 0) {
6070                 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6071                 if (mem) {
6072                         memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6073                         ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6074                 }
6075         }
6076
6077         pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6078
6079         return 0;
6080 }
6081
6082 static void
6083 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6084 {
6085         IOCPage4_t              *pIoc4;
6086         CONFIGPARMS              cfg;
6087         ConfigPageHeader_t       header;
6088         dma_addr_t               ioc4_dma;
6089         int                      iocpage4sz;
6090
6091         /* Read and save IOC Page 4
6092          */
6093         header.PageVersion = 0;
6094         header.PageLength = 0;
6095         header.PageNumber = 4;
6096         header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6097         cfg.cfghdr.hdr = &header;
6098         cfg.physAddr = -1;
6099         cfg.pageAddr = 0;
6100         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6101         cfg.dir = 0;
6102         cfg.timeout = 0;
6103         if (mpt_config(ioc, &cfg) != 0)
6104                 return;
6105
6106         if (header.PageLength == 0)
6107                 return;
6108
6109         if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6110                 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6111                 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6112                 if (!pIoc4)
6113                         return;
6114                 ioc->alloc_total += iocpage4sz;
6115         } else {
6116                 ioc4_dma = ioc->spi_data.IocPg4_dma;
6117                 iocpage4sz = ioc->spi_data.IocPg4Sz;
6118         }
6119
6120         /* Read the Page into dma memory.
6121          */
6122         cfg.physAddr = ioc4_dma;
6123         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6124         if (mpt_config(ioc, &cfg) == 0) {
6125                 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6126                 ioc->spi_data.IocPg4_dma = ioc4_dma;
6127                 ioc->spi_data.IocPg4Sz = iocpage4sz;
6128         } else {
6129                 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6130                 ioc->spi_data.pIocPg4 = NULL;
6131                 ioc->alloc_total -= iocpage4sz;
6132         }
6133 }
6134
6135 static void
6136 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6137 {
6138         IOCPage1_t              *pIoc1;
6139         CONFIGPARMS              cfg;
6140         ConfigPageHeader_t       header;
6141         dma_addr_t               ioc1_dma;
6142         int                      iocpage1sz = 0;
6143         u32                      tmp;
6144
6145         /* Check the Coalescing Timeout in IOC Page 1
6146          */
6147         header.PageVersion = 0;
6148         header.PageLength = 0;
6149         header.PageNumber = 1;
6150         header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6151         cfg.cfghdr.hdr = &header;
6152         cfg.physAddr = -1;
6153         cfg.pageAddr = 0;
6154         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6155         cfg.dir = 0;
6156         cfg.timeout = 0;
6157         if (mpt_config(ioc, &cfg) != 0)
6158                 return;
6159
6160         if (header.PageLength == 0)
6161                 return;
6162
6163         /* Read Header good, alloc memory
6164          */
6165         iocpage1sz = header.PageLength * 4;
6166         pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6167         if (!pIoc1)
6168                 return;
6169
6170         /* Read the Page and check coalescing timeout
6171          */
6172         cfg.physAddr = ioc1_dma;
6173         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6174         if (mpt_config(ioc, &cfg) == 0) {
6175
6176                 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6177                 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6178                         tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6179
6180                         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6181                                         ioc->name, tmp));
6182
6183                         if (tmp > MPT_COALESCING_TIMEOUT) {
6184                                 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6185
6186                                 /* Write NVRAM and current
6187                                  */
6188                                 cfg.dir = 1;
6189                                 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6190                                 if (mpt_config(ioc, &cfg) == 0) {
6191                                         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6192                                                         ioc->name, MPT_COALESCING_TIMEOUT));
6193
6194                                         cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6195                                         if (mpt_config(ioc, &cfg) == 0) {
6196                                                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6197                                                                 "Reset NVRAM Coalescing Timeout to = %d\n",
6198                                                                 ioc->name, MPT_COALESCING_TIMEOUT));
6199                                         } else {
6200                                                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6201                                                                 "Reset NVRAM Coalescing Timeout Failed\n",
6202                                                                 ioc->name));
6203                                         }
6204
6205                                 } else {
6206                                         dprintk(ioc, printk(MYIOC_s_WARN_FMT
6207                                                 "Reset of Current Coalescing Timeout Failed!\n",
6208                                                 ioc->name));
6209                                 }
6210                         }
6211
6212                 } else {
6213                         dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6214                 }
6215         }
6216
6217         pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6218
6219         return;
6220 }
6221
6222 static void
6223 mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6224 {
6225         CONFIGPARMS             cfg;
6226         ConfigPageHeader_t      hdr;
6227         dma_addr_t              buf_dma;
6228         ManufacturingPage0_t    *pbuf = NULL;
6229
6230         memset(&cfg, 0 , sizeof(CONFIGPARMS));
6231         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6232
6233         hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6234         cfg.cfghdr.hdr = &hdr;
6235         cfg.physAddr = -1;
6236         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6237         cfg.timeout = 10;
6238
6239         if (mpt_config(ioc, &cfg) != 0)
6240                 goto out;
6241
6242         if (!cfg.cfghdr.hdr->PageLength)
6243                 goto out;
6244
6245         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6246         pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6247         if (!pbuf)
6248                 goto out;
6249
6250         cfg.physAddr = buf_dma;
6251
6252         if (mpt_config(ioc, &cfg) != 0)
6253                 goto out;
6254
6255         memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6256         memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6257         memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6258
6259 out:
6260
6261         if (pbuf)
6262                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6263 }
6264
6265 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6266 /**
6267  *      SendEventNotification - Send EventNotification (on or off) request to adapter
6268  *      @ioc: Pointer to MPT_ADAPTER structure
6269  *      @EvSwitch: Event switch flags
6270  *      @sleepFlag: Specifies whether the process can sleep
6271  */
6272 static int
6273 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6274 {
6275         EventNotification_t     evn;
6276         MPIDefaultReply_t       reply_buf;
6277
6278         memset(&evn, 0, sizeof(EventNotification_t));
6279         memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6280
6281         evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6282         evn.Switch = EvSwitch;
6283         evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6284
6285         devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6286             "Sending EventNotification (%d) request %p\n",
6287             ioc->name, EvSwitch, &evn));
6288
6289         return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6290             (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6291             sleepFlag);
6292 }
6293
6294 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6295 /**
6296  *      SendEventAck - Send EventAck request to MPT adapter.
6297  *      @ioc: Pointer to MPT_ADAPTER structure
6298  *      @evnp: Pointer to original EventNotification request
6299  */
6300 static int
6301 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6302 {
6303         EventAck_t      *pAck;
6304
6305         if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6306                 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6307                     ioc->name, __func__));
6308                 return -1;
6309         }
6310
6311         devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6312
6313         pAck->Function     = MPI_FUNCTION_EVENT_ACK;
6314         pAck->ChainOffset  = 0;
6315         pAck->Reserved[0]  = pAck->Reserved[1] = 0;
6316         pAck->MsgFlags     = 0;
6317         pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6318         pAck->Event        = evnp->Event;
6319         pAck->EventContext = evnp->EventContext;
6320
6321         mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6322
6323         return 0;
6324 }
6325
6326 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6327 /**
6328  *      mpt_config - Generic function to issue config message
6329  *      @ioc:   Pointer to an adapter structure
6330  *      @pCfg:  Pointer to a configuration structure. Struct contains
6331  *              action, page address, direction, physical address
6332  *              and pointer to a configuration page header
6333  *              Page header is updated.
6334  *
6335  *      Returns 0 for success
6336  *      -EPERM if not allowed due to ISR context
6337  *      -EAGAIN if no msg frames currently available
6338  *      -EFAULT for non-successful reply or no reply (timeout)
6339  */
6340 int
6341 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6342 {
6343         Config_t        *pReq;
6344         ConfigReply_t   *pReply;
6345         ConfigExtendedPageHeader_t  *pExtHdr = NULL;
6346         MPT_FRAME_HDR   *mf;
6347         int              ii;
6348         int              flagsLength;
6349         long             timeout;
6350         int              ret;
6351         u8               page_type = 0, extend_page;
6352         unsigned long    timeleft;
6353         unsigned long    flags;
6354     int          in_isr;
6355         u8               issue_hard_reset = 0;
6356         u8               retry_count = 0;
6357
6358         /*      Prevent calling wait_event() (below), if caller happens
6359          *      to be in ISR context, because that is fatal!
6360          */
6361         in_isr = in_interrupt();
6362         if (in_isr) {
6363                 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6364                                 ioc->name));
6365                 return -EPERM;
6366     }
6367
6368         /* don't send a config page during diag reset */
6369         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6370         if (ioc->ioc_reset_in_progress) {
6371                 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6372                     "%s: busy with host reset\n", ioc->name, __func__));
6373                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6374                 return -EBUSY;
6375         }
6376         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6377
6378         /* don't send if no chance of success */
6379         if (!ioc->active ||
6380             mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6381                 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6382                     "%s: ioc not operational, %d, %xh\n",
6383                     ioc->name, __func__, ioc->active,
6384                     mpt_GetIocState(ioc, 0)));
6385                 return -EFAULT;
6386         }
6387
6388  retry_config:
6389         mutex_lock(&ioc->mptbase_cmds.mutex);
6390         /* init the internal cmd struct */
6391         memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6392         INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6393
6394         /* Get and Populate a free Frame
6395          */
6396         if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6397                 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6398                 "mpt_config: no msg frames!\n", ioc->name));
6399                 ret = -EAGAIN;
6400                 goto out;
6401         }
6402
6403         pReq = (Config_t *)mf;
6404         pReq->Action = pCfg->action;
6405         pReq->Reserved = 0;
6406         pReq->ChainOffset = 0;
6407         pReq->Function = MPI_FUNCTION_CONFIG;
6408
6409         /* Assume page type is not extended and clear "reserved" fields. */
6410         pReq->ExtPageLength = 0;
6411         pReq->ExtPageType = 0;
6412         pReq->MsgFlags = 0;
6413
6414         for (ii=0; ii < 8; ii++)
6415                 pReq->Reserved2[ii] = 0;
6416
6417         pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6418         pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6419         pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6420         pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6421
6422         if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6423                 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6424                 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6425                 pReq->ExtPageType = pExtHdr->ExtPageType;
6426                 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6427
6428                 /* Page Length must be treated as a reserved field for the
6429                  * extended header.
6430                  */
6431                 pReq->Header.PageLength = 0;
6432         }
6433
6434         pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6435
6436         /* Add a SGE to the config request.
6437          */
6438         if (pCfg->dir)
6439                 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6440         else
6441                 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6442
6443         if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6444             MPI_CONFIG_PAGETYPE_EXTENDED) {
6445                 flagsLength |= pExtHdr->ExtPageLength * 4;
6446                 page_type = pReq->ExtPageType;
6447                 extend_page = 1;
6448         } else {
6449                 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6450                 page_type = pReq->Header.PageType;
6451                 extend_page = 0;
6452         }
6453
6454         dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6455             "Sending Config request type 0x%x, page 0x%x and action %d\n",
6456             ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6457
6458         ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6459         timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6460         mpt_put_msg_frame(mpt_base_index, ioc, mf);
6461         timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6462                 timeout);
6463         if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6464                 ret = -ETIME;
6465                 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6466                     "Failed Sending Config request type 0x%x, page 0x%x,"
6467                     " action %d, status %xh, time left %ld\n\n",
6468                         ioc->name, page_type, pReq->Header.PageNumber,
6469                         pReq->Action, ioc->mptbase_cmds.status, timeleft));
6470                 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6471                         goto out;
6472                 if (!timeleft) {
6473                         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6474                         if (ioc->ioc_reset_in_progress) {
6475                                 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6476                                         flags);
6477                                 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6478                                         " progress mpt_config timed out.!!\n",
6479                                         __func__, ioc->name);
6480                                 mutex_unlock(&ioc->mptbase_cmds.mutex);
6481                                 return -EFAULT;
6482                         }
6483                         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6484                         issue_hard_reset = 1;
6485                 }
6486                 goto out;
6487         }
6488
6489         if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6490                 ret = -1;
6491                 goto out;
6492         }
6493         pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6494         ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6495         if (ret == MPI_IOCSTATUS_SUCCESS) {
6496                 if (extend_page) {
6497                         pCfg->cfghdr.ehdr->ExtPageLength =
6498                             le16_to_cpu(pReply->ExtPageLength);
6499                         pCfg->cfghdr.ehdr->ExtPageType =
6500                             pReply->ExtPageType;
6501                 }
6502                 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6503                 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6504                 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6505                 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6506
6507         }
6508
6509         if (retry_count)
6510                 printk(MYIOC_s_INFO_FMT "Retry completed "
6511                     "ret=0x%x timeleft=%ld\n",
6512                     ioc->name, ret, timeleft);
6513
6514         dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6515              ret, le32_to_cpu(pReply->IOCLogInfo)));
6516
6517 out:
6518
6519         CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6520         mutex_unlock(&ioc->mptbase_cmds.mutex);
6521         if (issue_hard_reset) {
6522                 issue_hard_reset = 0;
6523                 printk(MYIOC_s_WARN_FMT
6524                        "Issuing Reset from %s!!, doorbell=0x%08x\n",
6525                        ioc->name, __func__, mpt_GetIocState(ioc, 0));
6526                 if (retry_count == 0) {
6527                         if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6528                                 retry_count++;
6529                 } else
6530                         mpt_HardResetHandler(ioc, CAN_SLEEP);
6531
6532                 mpt_free_msg_frame(ioc, mf);
6533                 /* attempt one retry for a timed out command */
6534                 if (retry_count < 2) {
6535                         printk(MYIOC_s_INFO_FMT
6536                             "Attempting Retry Config request"
6537                             " type 0x%x, page 0x%x,"
6538                             " action %d\n", ioc->name, page_type,
6539                             pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6540                         retry_count++;
6541                         goto retry_config;
6542                 }
6543         }
6544         return ret;
6545
6546 }
6547
6548 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6549 /**
6550  *      mpt_ioc_reset - Base cleanup for hard reset
6551  *      @ioc: Pointer to the adapter structure
6552  *      @reset_phase: Indicates pre- or post-reset functionality
6553  *
6554  *      Remark: Frees resources with internally generated commands.
6555  */
6556 static int
6557 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6558 {
6559         switch (reset_phase) {
6560         case MPT_IOC_SETUP_RESET:
6561                 ioc->taskmgmt_quiesce_io = 1;
6562                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6563                     "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6564                 break;
6565         case MPT_IOC_PRE_RESET:
6566                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6567                     "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6568                 break;
6569         case MPT_IOC_POST_RESET:
6570                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6571                     "%s: MPT_IOC_POST_RESET\n",  ioc->name, __func__));
6572 /* wake up mptbase_cmds */
6573                 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6574                         ioc->mptbase_cmds.status |=
6575                             MPT_MGMT_STATUS_DID_IOCRESET;
6576                         complete(&ioc->mptbase_cmds.done);
6577                 }
6578 /* wake up taskmgmt_cmds */
6579                 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6580                         ioc->taskmgmt_cmds.status |=
6581                                 MPT_MGMT_STATUS_DID_IOCRESET;
6582                         complete(&ioc->taskmgmt_cmds.done);
6583                 }
6584                 break;
6585         default:
6586                 break;
6587         }
6588
6589         return 1;               /* currently means nothing really */
6590 }
6591
6592
6593 #ifdef CONFIG_PROC_FS           /* { */
6594 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6595 /*
6596  *      procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6597  */
6598 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6599 /**
6600  *      procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6601  *
6602  *      Returns 0 for success, non-zero for failure.
6603  */
6604 static int
6605 procmpt_create(void)
6606 {
6607         mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6608         if (mpt_proc_root_dir == NULL)
6609                 return -ENOTDIR;
6610
6611         proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
6612         proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
6613         return 0;
6614 }
6615
6616 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6617 /**
6618  *      procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6619  *
6620  *      Returns 0 for success, non-zero for failure.
6621  */
6622 static void
6623 procmpt_destroy(void)
6624 {
6625         remove_proc_entry("version", mpt_proc_root_dir);
6626         remove_proc_entry("summary", mpt_proc_root_dir);
6627         remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6628 }
6629
6630 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6631 /*
6632  *      Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6633  */
6634 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6635
6636 static int mpt_summary_proc_show(struct seq_file *m, void *v)
6637 {
6638         MPT_ADAPTER *ioc = m->private;
6639
6640         if (ioc) {
6641                 seq_mpt_print_ioc_summary(ioc, m, 1);
6642         } else {
6643                 list_for_each_entry(ioc, &ioc_list, list) {
6644                         seq_mpt_print_ioc_summary(ioc, m, 1);
6645                 }
6646         }
6647
6648         return 0;
6649 }
6650
6651 static int mpt_summary_proc_open(struct inode *inode, struct file *file)
6652 {
6653         return single_open(file, mpt_summary_proc_show, PDE_DATA(inode));
6654 }
6655
6656 static const struct file_operations mpt_summary_proc_fops = {
6657         .owner          = THIS_MODULE,
6658         .open           = mpt_summary_proc_open,
6659         .read           = seq_read,
6660         .llseek         = seq_lseek,
6661         .release        = single_release,
6662 };
6663
6664 static int mpt_version_proc_show(struct seq_file *m, void *v)
6665 {
6666         u8       cb_idx;
6667         int      scsi, fc, sas, lan, ctl, targ, dmp;
6668         char    *drvname;
6669
6670         seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6671         seq_printf(m, "  Fusion MPT base driver\n");
6672
6673         scsi = fc = sas = lan = ctl = targ = dmp = 0;
6674         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6675                 drvname = NULL;
6676                 if (MptCallbacks[cb_idx]) {
6677                         switch (MptDriverClass[cb_idx]) {
6678                         case MPTSPI_DRIVER:
6679                                 if (!scsi++) drvname = "SPI host";
6680                                 break;
6681                         case MPTFC_DRIVER:
6682                                 if (!fc++) drvname = "FC host";
6683                                 break;
6684                         case MPTSAS_DRIVER:
6685                                 if (!sas++) drvname = "SAS host";
6686                                 break;
6687                         case MPTLAN_DRIVER:
6688                                 if (!lan++) drvname = "LAN";
6689                                 break;
6690                         case MPTSTM_DRIVER:
6691                                 if (!targ++) drvname = "SCSI target";
6692                                 break;
6693                         case MPTCTL_DRIVER:
6694                                 if (!ctl++) drvname = "ioctl";
6695                                 break;
6696                         }
6697
6698                         if (drvname)
6699                                 seq_printf(m, "  Fusion MPT %s driver\n", drvname);
6700                 }
6701         }
6702
6703         return 0;
6704 }
6705
6706 static int mpt_version_proc_open(struct inode *inode, struct file *file)
6707 {
6708         return single_open(file, mpt_version_proc_show, NULL);
6709 }
6710
6711 static const struct file_operations mpt_version_proc_fops = {
6712         .owner          = THIS_MODULE,
6713         .open           = mpt_version_proc_open,
6714         .read           = seq_read,
6715         .llseek         = seq_lseek,
6716         .release        = single_release,
6717 };
6718
6719 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6720 {
6721         MPT_ADAPTER     *ioc = m->private;
6722         char             expVer[32];
6723         int              sz;
6724         int              p;
6725
6726         mpt_get_fw_exp_ver(expVer, ioc);
6727
6728         seq_printf(m, "%s:", ioc->name);
6729         if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6730                 seq_printf(m, "  (f/w download boot flag set)");
6731 //      if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6732 //              seq_printf(m, "  CONFIG_CHECKSUM_FAIL!");
6733
6734         seq_printf(m, "\n  ProductID = 0x%04x (%s)\n",
6735                         ioc->facts.ProductID,
6736                         ioc->prod_name);
6737         seq_printf(m, "  FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6738         if (ioc->facts.FWImageSize)
6739                 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6740         seq_printf(m, "\n  MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6741         seq_printf(m, "  FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6742         seq_printf(m, "  EventState = 0x%02x\n", ioc->facts.EventState);
6743
6744         seq_printf(m, "  CurrentHostMfaHighAddr = 0x%08x\n",
6745                         ioc->facts.CurrentHostMfaHighAddr);
6746         seq_printf(m, "  CurrentSenseBufferHighAddr = 0x%08x\n",
6747                         ioc->facts.CurrentSenseBufferHighAddr);
6748
6749         seq_printf(m, "  MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6750         seq_printf(m, "  MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6751
6752         seq_printf(m, "  RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6753                                         (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6754         /*
6755          *  Rounding UP to nearest 4-kB boundary here...
6756          */
6757         sz = (ioc->req_sz * ioc->req_depth) + 128;
6758         sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6759         seq_printf(m, "    {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6760                                         ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6761         seq_printf(m, "    {MaxReqSz=%d}   {MaxReqDepth=%d}\n",
6762                                         4*ioc->facts.RequestFrameSize,
6763                                         ioc->facts.GlobalCredits);
6764
6765         seq_printf(m, "  Frames   @ 0x%p (Dma @ 0x%p)\n",
6766                                         (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6767         sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6768         seq_printf(m, "    {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6769                                         ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6770         seq_printf(m, "    {MaxRepSz=%d}   {MaxRepDepth=%d}\n",
6771                                         ioc->facts.CurReplyFrameSize,
6772                                         ioc->facts.ReplyQueueDepth);
6773
6774         seq_printf(m, "  MaxDevices = %d\n",
6775                         (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6776         seq_printf(m, "  MaxBuses = %d\n", ioc->facts.MaxBuses);
6777
6778         /* per-port info */
6779         for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6780                 seq_printf(m, "  PortNumber = %d (of %d)\n",
6781                                 p+1,
6782                                 ioc->facts.NumberOfPorts);
6783                 if (ioc->bus_type == FC) {
6784                         if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6785                                 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6786                                 seq_printf(m, "    LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
6787                                                 a[5], a[4], a[3], a[2], a[1], a[0]);
6788                         }
6789                         seq_printf(m, "    WWN = %08X%08X:%08X%08X\n",
6790                                         ioc->fc_port_page0[p].WWNN.High,
6791                                         ioc->fc_port_page0[p].WWNN.Low,
6792                                         ioc->fc_port_page0[p].WWPN.High,
6793                                         ioc->fc_port_page0[p].WWPN.Low);
6794                 }
6795         }
6796
6797         return 0;
6798 }
6799
6800 static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
6801 {
6802         return single_open(file, mpt_iocinfo_proc_show, PDE_DATA(inode));
6803 }
6804
6805 static const struct file_operations mpt_iocinfo_proc_fops = {
6806         .owner          = THIS_MODULE,
6807         .open           = mpt_iocinfo_proc_open,
6808         .read           = seq_read,
6809         .llseek         = seq_lseek,
6810         .release        = single_release,
6811 };
6812 #endif          /* CONFIG_PROC_FS } */
6813
6814 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6815 static void
6816 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6817 {
6818         buf[0] ='\0';
6819         if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6820                 sprintf(buf, " (Exp %02d%02d)",
6821                         (ioc->facts.FWVersion.Word >> 16) & 0x00FF,     /* Month */
6822                         (ioc->facts.FWVersion.Word >> 8) & 0x1F);       /* Day */
6823
6824                 /* insider hack! */
6825                 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6826                         strcat(buf, " [MDBG]");
6827         }
6828 }
6829
6830 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6831 /**
6832  *      mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6833  *      @ioc: Pointer to MPT_ADAPTER structure
6834  *      @buffer: Pointer to buffer where IOC summary info should be written
6835  *      @size: Pointer to number of bytes we wrote (set by this routine)
6836  *      @len: Offset at which to start writing in buffer
6837  *      @showlan: Display LAN stuff?
6838  *
6839  *      This routine writes (english readable) ASCII text, which represents
6840  *      a summary of IOC information, to a buffer.
6841  */
6842 void
6843 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6844 {
6845         char expVer[32];
6846         int y;
6847
6848         mpt_get_fw_exp_ver(expVer, ioc);
6849
6850         /*
6851          *  Shorter summary of attached ioc's...
6852          */
6853         y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6854                         ioc->name,
6855                         ioc->prod_name,
6856                         MPT_FW_REV_MAGIC_ID_STRING,     /* "FwRev=" or somesuch */
6857                         ioc->facts.FWVersion.Word,
6858                         expVer,
6859                         ioc->facts.NumberOfPorts,
6860                         ioc->req_depth);
6861
6862         if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6863                 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6864                 y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6865                         a[5], a[4], a[3], a[2], a[1], a[0]);
6866         }
6867
6868         y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6869
6870         if (!ioc->active)
6871                 y += sprintf(buffer+len+y, " (disabled)");
6872
6873         y += sprintf(buffer+len+y, "\n");
6874
6875         *size = y;
6876 }
6877
6878 #ifdef CONFIG_PROC_FS
6879 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6880 {
6881         char expVer[32];
6882
6883         mpt_get_fw_exp_ver(expVer, ioc);
6884
6885         /*
6886          *  Shorter summary of attached ioc's...
6887          */
6888         seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6889                         ioc->name,
6890                         ioc->prod_name,
6891                         MPT_FW_REV_MAGIC_ID_STRING,     /* "FwRev=" or somesuch */
6892                         ioc->facts.FWVersion.Word,
6893                         expVer,
6894                         ioc->facts.NumberOfPorts,
6895                         ioc->req_depth);
6896
6897         if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6898                 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6899                 seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6900                         a[5], a[4], a[3], a[2], a[1], a[0]);
6901         }
6902
6903         seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6904
6905         if (!ioc->active)
6906                 seq_printf(m, " (disabled)");
6907
6908         seq_putc(m, '\n');
6909 }
6910 #endif
6911
6912 /**
6913  *      mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6914  *      @ioc: Pointer to MPT_ADAPTER structure
6915  *
6916  *      Returns 0 for SUCCESS or -1 if FAILED.
6917  *
6918  *      If -1 is return, then it was not possible to set the flags
6919  **/
6920 int
6921 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6922 {
6923         unsigned long    flags;
6924         int              retval;
6925
6926         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6927         if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6928             (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6929                 retval = -1;
6930                 goto out;
6931         }
6932         retval = 0;
6933         ioc->taskmgmt_in_progress = 1;
6934         ioc->taskmgmt_quiesce_io = 1;
6935         if (ioc->alt_ioc) {
6936                 ioc->alt_ioc->taskmgmt_in_progress = 1;
6937                 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6938         }
6939  out:
6940         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6941         return retval;
6942 }
6943 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6944
6945 /**
6946  *      mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6947  *      @ioc: Pointer to MPT_ADAPTER structure
6948  *
6949  **/
6950 void
6951 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6952 {
6953         unsigned long    flags;
6954
6955         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6956         ioc->taskmgmt_in_progress = 0;
6957         ioc->taskmgmt_quiesce_io = 0;
6958         if (ioc->alt_ioc) {
6959                 ioc->alt_ioc->taskmgmt_in_progress = 0;
6960                 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6961         }
6962         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6963 }
6964 EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6965
6966
6967 /**
6968  *      mpt_halt_firmware - Halts the firmware if it is operational and panic
6969  *      the kernel
6970  *      @ioc: Pointer to MPT_ADAPTER structure
6971  *
6972  **/
6973 void
6974 mpt_halt_firmware(MPT_ADAPTER *ioc)
6975 {
6976         u32      ioc_raw_state;
6977
6978         ioc_raw_state = mpt_GetIocState(ioc, 0);
6979
6980         if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6981                 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6982                         ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6983                 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6984                         ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6985         } else {
6986                 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6987                 panic("%s: Firmware is halted due to command timeout\n",
6988                         ioc->name);
6989         }
6990 }
6991 EXPORT_SYMBOL(mpt_halt_firmware);
6992
6993 /**
6994  *      mpt_SoftResetHandler - Issues a less expensive reset
6995  *      @ioc: Pointer to MPT_ADAPTER structure
6996  *      @sleepFlag: Indicates if sleep or schedule must be called.
6997  *
6998  *      Returns 0 for SUCCESS or -1 if FAILED.
6999  *
7000  *      Message Unit Reset - instructs the IOC to reset the Reply Post and
7001  *      Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
7002  *      All posted buffers are freed, and event notification is turned off.
7003  *      IOC doesn't reply to any outstanding request. This will transfer IOC
7004  *      to READY state.
7005  **/
7006 static int
7007 mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7008 {
7009         int              rc;
7010         int              ii;
7011         u8               cb_idx;
7012         unsigned long    flags;
7013         u32              ioc_state;
7014         unsigned long    time_count;
7015
7016         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
7017                 ioc->name));
7018
7019         ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7020
7021         if (mpt_fwfault_debug)
7022                 mpt_halt_firmware(ioc);
7023
7024         if (ioc_state == MPI_IOC_STATE_FAULT ||
7025             ioc_state == MPI_IOC_STATE_RESET) {
7026                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7027                     "skipping, either in FAULT or RESET state!\n", ioc->name));
7028                 return -1;
7029         }
7030
7031         if (ioc->bus_type == FC) {
7032                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7033                     "skipping, because the bus type is FC!\n", ioc->name));
7034                 return -1;
7035         }
7036
7037         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7038         if (ioc->ioc_reset_in_progress) {
7039                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7040                 return -1;
7041         }
7042         ioc->ioc_reset_in_progress = 1;
7043         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7044
7045         rc = -1;
7046
7047         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7048                 if (MptResetHandlers[cb_idx])
7049                         mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7050         }
7051
7052         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7053         if (ioc->taskmgmt_in_progress) {
7054                 ioc->ioc_reset_in_progress = 0;
7055                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7056                 return -1;
7057         }
7058         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7059         /* Disable reply interrupts (also blocks FreeQ) */
7060         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7061         ioc->active = 0;
7062         time_count = jiffies;
7063
7064         rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7065
7066         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7067                 if (MptResetHandlers[cb_idx])
7068                         mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7069         }
7070
7071         if (rc)
7072                 goto out;
7073
7074         ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7075         if (ioc_state != MPI_IOC_STATE_READY)
7076                 goto out;
7077
7078         for (ii = 0; ii < 5; ii++) {
7079                 /* Get IOC facts! Allow 5 retries */
7080                 rc = GetIocFacts(ioc, sleepFlag,
7081                         MPT_HOSTEVENT_IOC_RECOVER);
7082                 if (rc == 0)
7083                         break;
7084                 if (sleepFlag == CAN_SLEEP)
7085                         msleep(100);
7086                 else
7087                         mdelay(100);
7088         }
7089         if (ii == 5)
7090                 goto out;
7091
7092         rc = PrimeIocFifos(ioc);
7093         if (rc != 0)
7094                 goto out;
7095
7096         rc = SendIocInit(ioc, sleepFlag);
7097         if (rc != 0)
7098                 goto out;
7099
7100         rc = SendEventNotification(ioc, 1, sleepFlag);
7101         if (rc != 0)
7102                 goto out;
7103
7104         if (ioc->hard_resets < -1)
7105                 ioc->hard_resets++;
7106
7107         /*
7108          * At this point, we know soft reset succeeded.
7109          */
7110
7111         ioc->active = 1;
7112         CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7113
7114  out:
7115         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7116         ioc->ioc_reset_in_progress = 0;
7117         ioc->taskmgmt_quiesce_io = 0;
7118         ioc->taskmgmt_in_progress = 0;
7119         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7120
7121         if (ioc->active) {      /* otherwise, hard reset coming */
7122                 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7123                         if (MptResetHandlers[cb_idx])
7124                                 mpt_signal_reset(cb_idx, ioc,
7125                                         MPT_IOC_POST_RESET);
7126                 }
7127         }
7128
7129         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7130                 "SoftResetHandler: completed (%d seconds): %s\n",
7131                 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7132                 ((rc == 0) ? "SUCCESS" : "FAILED")));
7133
7134         return rc;
7135 }
7136
7137 /**
7138  *      mpt_Soft_Hard_ResetHandler - Try less expensive reset
7139  *      @ioc: Pointer to MPT_ADAPTER structure
7140  *      @sleepFlag: Indicates if sleep or schedule must be called.
7141  *
7142  *      Returns 0 for SUCCESS or -1 if FAILED.
7143  *      Try for softreset first, only if it fails go for expensive
7144  *      HardReset.
7145  **/
7146 int
7147 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7148         int ret = -1;
7149
7150         ret = mpt_SoftResetHandler(ioc, sleepFlag);
7151         if (ret == 0)
7152                 return ret;
7153         ret = mpt_HardResetHandler(ioc, sleepFlag);
7154         return ret;
7155 }
7156 EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7157
7158 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7159 /*
7160  *      Reset Handling
7161  */
7162 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7163 /**
7164  *      mpt_HardResetHandler - Generic reset handler
7165  *      @ioc: Pointer to MPT_ADAPTER structure
7166  *      @sleepFlag: Indicates if sleep or schedule must be called.
7167  *
7168  *      Issues SCSI Task Management call based on input arg values.
7169  *      If TaskMgmt fails, returns associated SCSI request.
7170  *
7171  *      Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7172  *      or a non-interrupt thread.  In the former, must not call schedule().
7173  *
7174  *      Note: A return of -1 is a FATAL error case, as it means a
7175  *      FW reload/initialization failed.
7176  *
7177  *      Returns 0 for SUCCESS or -1 if FAILED.
7178  */
7179 int
7180 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7181 {
7182         int      rc;
7183         u8       cb_idx;
7184         unsigned long    flags;
7185         unsigned long    time_count;
7186
7187         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7188 #ifdef MFCNT
7189         printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7190         printk("MF count 0x%x !\n", ioc->mfcnt);
7191 #endif
7192         if (mpt_fwfault_debug)
7193                 mpt_halt_firmware(ioc);
7194
7195         /* Reset the adapter. Prevent more than 1 call to
7196          * mpt_do_ioc_recovery at any instant in time.
7197          */
7198         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7199         if (ioc->ioc_reset_in_progress) {
7200                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7201                 ioc->wait_on_reset_completion = 1;
7202                 do {
7203                         ssleep(1);
7204                 } while (ioc->ioc_reset_in_progress == 1);
7205                 ioc->wait_on_reset_completion = 0;
7206                 return ioc->reset_status;
7207         }
7208         if (ioc->wait_on_reset_completion) {
7209                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7210                 rc = 0;
7211                 time_count = jiffies;
7212                 goto exit;
7213         }
7214         ioc->ioc_reset_in_progress = 1;
7215         if (ioc->alt_ioc)
7216                 ioc->alt_ioc->ioc_reset_in_progress = 1;
7217         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7218
7219
7220         /* The SCSI driver needs to adjust timeouts on all current
7221          * commands prior to the diagnostic reset being issued.
7222          * Prevents timeouts occurring during a diagnostic reset...very bad.
7223          * For all other protocol drivers, this is a no-op.
7224          */
7225         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7226                 if (MptResetHandlers[cb_idx]) {
7227                         mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7228                         if (ioc->alt_ioc)
7229                                 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7230                                         MPT_IOC_SETUP_RESET);
7231                 }
7232         }
7233
7234         time_count = jiffies;
7235         rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7236         if (rc != 0) {
7237                 printk(KERN_WARNING MYNAM
7238                        ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7239                        rc, ioc->name, mpt_GetIocState(ioc, 0));
7240         } else {
7241                 if (ioc->hard_resets < -1)
7242                         ioc->hard_resets++;
7243         }
7244
7245         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7246         ioc->ioc_reset_in_progress = 0;
7247         ioc->taskmgmt_quiesce_io = 0;
7248         ioc->taskmgmt_in_progress = 0;
7249         ioc->reset_status = rc;
7250         if (ioc->alt_ioc) {
7251                 ioc->alt_ioc->ioc_reset_in_progress = 0;
7252                 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7253                 ioc->alt_ioc->taskmgmt_in_progress = 0;
7254         }
7255         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7256
7257         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7258                 if (MptResetHandlers[cb_idx]) {
7259                         mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7260                         if (ioc->alt_ioc)
7261                                 mpt_signal_reset(cb_idx,
7262                                         ioc->alt_ioc, MPT_IOC_POST_RESET);
7263                 }
7264         }
7265 exit:
7266         dtmprintk(ioc,
7267             printk(MYIOC_s_DEBUG_FMT
7268                 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7269                 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7270                 "SUCCESS" : "FAILED")));
7271
7272         return rc;
7273 }
7274
7275 #ifdef CONFIG_FUSION_LOGGING
7276 static void
7277 mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7278 {
7279         char *ds = NULL;
7280         u32 evData0;
7281         int ii;
7282         u8 event;
7283         char *evStr = ioc->evStr;
7284
7285         event = le32_to_cpu(pEventReply->Event) & 0xFF;
7286         evData0 = le32_to_cpu(pEventReply->Data[0]);
7287
7288         switch(event) {
7289         case MPI_EVENT_NONE:
7290                 ds = "None";
7291                 break;
7292         case MPI_EVENT_LOG_DATA:
7293                 ds = "Log Data";
7294                 break;
7295         case MPI_EVENT_STATE_CHANGE:
7296                 ds = "State Change";
7297                 break;
7298         case MPI_EVENT_UNIT_ATTENTION:
7299                 ds = "Unit Attention";
7300                 break;
7301         case MPI_EVENT_IOC_BUS_RESET:
7302                 ds = "IOC Bus Reset";
7303                 break;
7304         case MPI_EVENT_EXT_BUS_RESET:
7305                 ds = "External Bus Reset";
7306                 break;
7307         case MPI_EVENT_RESCAN:
7308                 ds = "Bus Rescan Event";
7309                 break;
7310         case MPI_EVENT_LINK_STATUS_CHANGE:
7311                 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7312                         ds = "Link Status(FAILURE) Change";
7313                 else
7314                         ds = "Link Status(ACTIVE) Change";
7315                 break;
7316         case MPI_EVENT_LOOP_STATE_CHANGE:
7317                 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7318                         ds = "Loop State(LIP) Change";
7319                 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7320                         ds = "Loop State(LPE) Change";
7321                 else
7322                         ds = "Loop State(LPB) Change";
7323                 break;
7324         case MPI_EVENT_LOGOUT:
7325                 ds = "Logout";
7326                 break;
7327         case MPI_EVENT_EVENT_CHANGE:
7328                 if (evData0)
7329                         ds = "Events ON";
7330                 else
7331                         ds = "Events OFF";
7332                 break;
7333         case MPI_EVENT_INTEGRATED_RAID:
7334         {
7335                 u8 ReasonCode = (u8)(evData0 >> 16);
7336                 switch (ReasonCode) {
7337                 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7338                         ds = "Integrated Raid: Volume Created";
7339                         break;
7340                 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7341                         ds = "Integrated Raid: Volume Deleted";
7342                         break;
7343                 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7344                         ds = "Integrated Raid: Volume Settings Changed";
7345                         break;
7346                 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7347                         ds = "Integrated Raid: Volume Status Changed";
7348                         break;
7349                 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7350                         ds = "Integrated Raid: Volume Physdisk Changed";
7351                         break;
7352                 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7353                         ds = "Integrated Raid: Physdisk Created";
7354                         break;
7355                 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7356                         ds = "Integrated Raid: Physdisk Deleted";
7357                         break;
7358                 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7359                         ds = "Integrated Raid: Physdisk Settings Changed";
7360                         break;
7361                 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7362                         ds = "Integrated Raid: Physdisk Status Changed";
7363                         break;
7364                 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7365                         ds = "Integrated Raid: Domain Validation Needed";
7366                         break;
7367                 case MPI_EVENT_RAID_RC_SMART_DATA :
7368                         ds = "Integrated Raid; Smart Data";
7369                         break;
7370                 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7371                         ds = "Integrated Raid: Replace Action Started";
7372                         break;
7373                 default:
7374                         ds = "Integrated Raid";
7375                 break;
7376                 }
7377                 break;
7378         }
7379         case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7380                 ds = "SCSI Device Status Change";
7381                 break;
7382         case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7383         {
7384                 u8 id = (u8)(evData0);
7385                 u8 channel = (u8)(evData0 >> 8);
7386                 u8 ReasonCode = (u8)(evData0 >> 16);
7387                 switch (ReasonCode) {
7388                 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7389                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7390                             "SAS Device Status Change: Added: "
7391                             "id=%d channel=%d", id, channel);
7392                         break;
7393                 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7394                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7395                             "SAS Device Status Change: Deleted: "
7396                             "id=%d channel=%d", id, channel);
7397                         break;
7398                 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7399                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7400                             "SAS Device Status Change: SMART Data: "
7401                             "id=%d channel=%d", id, channel);
7402                         break;
7403                 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7404                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7405                             "SAS Device Status Change: No Persistancy: "
7406                             "id=%d channel=%d", id, channel);
7407                         break;
7408                 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7409                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7410                             "SAS Device Status Change: Unsupported Device "
7411                             "Discovered : id=%d channel=%d", id, channel);
7412                         break;
7413                 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7414                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7415                             "SAS Device Status Change: Internal Device "
7416                             "Reset : id=%d channel=%d", id, channel);
7417                         break;
7418                 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7419                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7420                             "SAS Device Status Change: Internal Task "
7421                             "Abort : id=%d channel=%d", id, channel);
7422                         break;
7423                 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7424                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7425                             "SAS Device Status Change: Internal Abort "
7426                             "Task Set : id=%d channel=%d", id, channel);
7427                         break;
7428                 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7429                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7430                             "SAS Device Status Change: Internal Clear "
7431                             "Task Set : id=%d channel=%d", id, channel);
7432                         break;
7433                 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7434                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7435                             "SAS Device Status Change: Internal Query "
7436                             "Task : id=%d channel=%d", id, channel);
7437                         break;
7438                 default:
7439                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7440                             "SAS Device Status Change: Unknown: "
7441                             "id=%d channel=%d", id, channel);
7442                         break;
7443                 }
7444                 break;
7445         }
7446         case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7447                 ds = "Bus Timer Expired";
7448                 break;
7449         case MPI_EVENT_QUEUE_FULL:
7450         {
7451                 u16 curr_depth = (u16)(evData0 >> 16);
7452                 u8 channel = (u8)(evData0 >> 8);
7453                 u8 id = (u8)(evData0);
7454
7455                 snprintf(evStr, EVENT_DESCR_STR_SZ,
7456                    "Queue Full: channel=%d id=%d depth=%d",
7457                    channel, id, curr_depth);
7458                 break;
7459         }
7460         case MPI_EVENT_SAS_SES:
7461                 ds = "SAS SES Event";
7462                 break;
7463         case MPI_EVENT_PERSISTENT_TABLE_FULL:
7464                 ds = "Persistent Table Full";
7465                 break;
7466         case MPI_EVENT_SAS_PHY_LINK_STATUS:
7467         {
7468                 u8 LinkRates = (u8)(evData0 >> 8);
7469                 u8 PhyNumber = (u8)(evData0);
7470                 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7471                         MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7472                 switch (LinkRates) {
7473                 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7474                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7475                            "SAS PHY Link Status: Phy=%d:"
7476                            " Rate Unknown",PhyNumber);
7477                         break;
7478                 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7479                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7480                            "SAS PHY Link Status: Phy=%d:"
7481                            " Phy Disabled",PhyNumber);
7482                         break;
7483                 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7484                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7485                            "SAS PHY Link Status: Phy=%d:"
7486                            " Failed Speed Nego",PhyNumber);
7487                         break;
7488                 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7489                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7490                            "SAS PHY Link Status: Phy=%d:"
7491                            " Sata OOB Completed",PhyNumber);
7492                         break;
7493                 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7494                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7495                            "SAS PHY Link Status: Phy=%d:"
7496                            " Rate 1.5 Gbps",PhyNumber);
7497                         break;
7498                 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7499                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7500                            "SAS PHY Link Status: Phy=%d:"
7501                            " Rate 3.0 Gbps", PhyNumber);
7502                         break;
7503                 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7504                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7505                            "SAS PHY Link Status: Phy=%d:"
7506                            " Rate 6.0 Gbps", PhyNumber);
7507                         break;
7508                 default:
7509                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7510                            "SAS PHY Link Status: Phy=%d", PhyNumber);
7511                         break;
7512                 }
7513                 break;
7514         }
7515         case MPI_EVENT_SAS_DISCOVERY_ERROR:
7516                 ds = "SAS Discovery Error";
7517                 break;
7518         case MPI_EVENT_IR_RESYNC_UPDATE:
7519         {
7520                 u8 resync_complete = (u8)(evData0 >> 16);
7521                 snprintf(evStr, EVENT_DESCR_STR_SZ,
7522                     "IR Resync Update: Complete = %d:",resync_complete);
7523                 break;
7524         }
7525         case MPI_EVENT_IR2:
7526         {
7527                 u8 id = (u8)(evData0);
7528                 u8 channel = (u8)(evData0 >> 8);
7529                 u8 phys_num = (u8)(evData0 >> 24);
7530                 u8 ReasonCode = (u8)(evData0 >> 16);
7531
7532                 switch (ReasonCode) {
7533                 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7534                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7535                             "IR2: LD State Changed: "
7536                             "id=%d channel=%d phys_num=%d",
7537                             id, channel, phys_num);
7538                         break;
7539                 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7540                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7541                             "IR2: PD State Changed "
7542                             "id=%d channel=%d phys_num=%d",
7543                             id, channel, phys_num);
7544                         break;
7545                 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7546                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7547                             "IR2: Bad Block Table Full: "
7548                             "id=%d channel=%d phys_num=%d",
7549                             id, channel, phys_num);
7550                         break;
7551                 case MPI_EVENT_IR2_RC_PD_INSERTED:
7552                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7553                             "IR2: PD Inserted: "
7554                             "id=%d channel=%d phys_num=%d",
7555                             id, channel, phys_num);
7556                         break;
7557                 case MPI_EVENT_IR2_RC_PD_REMOVED:
7558                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7559                             "IR2: PD Removed: "
7560                             "id=%d channel=%d phys_num=%d",
7561                             id, channel, phys_num);
7562                         break;
7563                 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7564                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7565                             "IR2: Foreign CFG Detected: "
7566                             "id=%d channel=%d phys_num=%d",
7567                             id, channel, phys_num);
7568                         break;
7569                 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7570                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7571                             "IR2: Rebuild Medium Error: "
7572                             "id=%d channel=%d phys_num=%d",
7573                             id, channel, phys_num);
7574                         break;
7575                 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7576                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7577                             "IR2: Dual Port Added: "
7578                             "id=%d channel=%d phys_num=%d",
7579                             id, channel, phys_num);
7580                         break;
7581                 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7582                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7583                             "IR2: Dual Port Removed: "
7584                             "id=%d channel=%d phys_num=%d",
7585                             id, channel, phys_num);
7586                         break;
7587                 default:
7588                         ds = "IR2";
7589                 break;
7590                 }
7591                 break;
7592         }
7593         case MPI_EVENT_SAS_DISCOVERY:
7594         {
7595                 if (evData0)
7596                         ds = "SAS Discovery: Start";
7597                 else
7598                         ds = "SAS Discovery: Stop";
7599                 break;
7600         }
7601         case MPI_EVENT_LOG_ENTRY_ADDED:
7602                 ds = "SAS Log Entry Added";
7603                 break;
7604
7605         case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7606         {
7607                 u8 phy_num = (u8)(evData0);
7608                 u8 port_num = (u8)(evData0 >> 8);
7609                 u8 port_width = (u8)(evData0 >> 16);
7610                 u8 primative = (u8)(evData0 >> 24);
7611                 snprintf(evStr, EVENT_DESCR_STR_SZ,
7612                     "SAS Broadcase Primative: phy=%d port=%d "
7613                     "width=%d primative=0x%02x",
7614                     phy_num, port_num, port_width, primative);
7615                 break;
7616         }
7617
7618         case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7619         {
7620                 u8 reason = (u8)(evData0);
7621
7622                 switch (reason) {
7623                 case MPI_EVENT_SAS_INIT_RC_ADDED:
7624                         ds = "SAS Initiator Status Change: Added";
7625                         break;
7626                 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7627                         ds = "SAS Initiator Status Change: Deleted";
7628                         break;
7629                 default:
7630                         ds = "SAS Initiator Status Change";
7631                         break;
7632                 }
7633                 break;
7634         }
7635
7636         case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7637         {
7638                 u8 max_init = (u8)(evData0);
7639                 u8 current_init = (u8)(evData0 >> 8);
7640
7641                 snprintf(evStr, EVENT_DESCR_STR_SZ,
7642                     "SAS Initiator Device Table Overflow: max initiators=%02d "
7643                     "current initators=%02d",
7644                     max_init, current_init);
7645                 break;
7646         }
7647         case MPI_EVENT_SAS_SMP_ERROR:
7648         {
7649                 u8 status = (u8)(evData0);
7650                 u8 port_num = (u8)(evData0 >> 8);
7651                 u8 result = (u8)(evData0 >> 16);
7652
7653                 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7654                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7655                             "SAS SMP Error: port=%d result=0x%02x",
7656                             port_num, result);
7657                 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7658                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7659                             "SAS SMP Error: port=%d : CRC Error",
7660                             port_num);
7661                 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7662                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7663                             "SAS SMP Error: port=%d : Timeout",
7664                             port_num);
7665                 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7666                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7667                             "SAS SMP Error: port=%d : No Destination",
7668                             port_num);
7669                 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7670                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7671                             "SAS SMP Error: port=%d : Bad Destination",
7672                             port_num);
7673                 else
7674                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7675                             "SAS SMP Error: port=%d : status=0x%02x",
7676                             port_num, status);
7677                 break;
7678         }
7679
7680         case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7681         {
7682                 u8 reason = (u8)(evData0);
7683
7684                 switch (reason) {
7685                 case MPI_EVENT_SAS_EXP_RC_ADDED:
7686                         ds = "Expander Status Change: Added";
7687                         break;
7688                 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7689                         ds = "Expander Status Change: Deleted";
7690                         break;
7691                 default:
7692                         ds = "Expander Status Change";
7693                         break;
7694                 }
7695                 break;
7696         }
7697
7698         /*
7699          *  MPT base "custom" events may be added here...
7700          */
7701         default:
7702                 ds = "Unknown";
7703                 break;
7704         }
7705         if (ds)
7706                 strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
7707
7708
7709         devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7710             "MPT event:(%02Xh) : %s\n",
7711             ioc->name, event, evStr));
7712
7713         devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7714             ": Event data:\n"));
7715         for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7716                 devtverboseprintk(ioc, printk(" %08x",
7717                     le32_to_cpu(pEventReply->Data[ii])));
7718         devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7719 }
7720 #endif
7721 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7722 /**
7723  *      ProcessEventNotification - Route EventNotificationReply to all event handlers
7724  *      @ioc: Pointer to MPT_ADAPTER structure
7725  *      @pEventReply: Pointer to EventNotification reply frame
7726  *      @evHandlers: Pointer to integer, number of event handlers
7727  *
7728  *      Routes a received EventNotificationReply to all currently registered
7729  *      event handlers.
7730  *      Returns sum of event handlers return values.
7731  */
7732 static int
7733 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7734 {
7735         u16 evDataLen;
7736         u32 evData0 = 0;
7737         int ii;
7738         u8 cb_idx;
7739         int r = 0;
7740         int handlers = 0;
7741         u8 event;
7742
7743         /*
7744          *  Do platform normalization of values
7745          */
7746         event = le32_to_cpu(pEventReply->Event) & 0xFF;
7747         evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7748         if (evDataLen) {
7749                 evData0 = le32_to_cpu(pEventReply->Data[0]);
7750         }
7751
7752 #ifdef CONFIG_FUSION_LOGGING
7753         if (evDataLen)
7754                 mpt_display_event_info(ioc, pEventReply);
7755 #endif
7756
7757         /*
7758          *  Do general / base driver event processing
7759          */
7760         switch(event) {
7761         case MPI_EVENT_EVENT_CHANGE:            /* 0A */
7762                 if (evDataLen) {
7763                         u8 evState = evData0 & 0xFF;
7764
7765                         /* CHECKME! What if evState unexpectedly says OFF (0)? */
7766
7767                         /* Update EventState field in cached IocFacts */
7768                         if (ioc->facts.Function) {
7769                                 ioc->facts.EventState = evState;
7770                         }
7771                 }
7772                 break;
7773         case MPI_EVENT_INTEGRATED_RAID:
7774                 mptbase_raid_process_event_data(ioc,
7775                     (MpiEventDataRaid_t *)pEventReply->Data);
7776                 break;
7777         default:
7778                 break;
7779         }
7780
7781         /*
7782          * Should this event be logged? Events are written sequentially.
7783          * When buffer is full, start again at the top.
7784          */
7785         if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7786                 int idx;
7787
7788                 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7789
7790                 ioc->events[idx].event = event;
7791                 ioc->events[idx].eventContext = ioc->eventContext;
7792
7793                 for (ii = 0; ii < 2; ii++) {
7794                         if (ii < evDataLen)
7795                                 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7796                         else
7797                                 ioc->events[idx].data[ii] =  0;
7798                 }
7799
7800                 ioc->eventContext++;
7801         }
7802
7803
7804         /*
7805          *  Call each currently registered protocol event handler.
7806          */
7807         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7808                 if (MptEvHandlers[cb_idx]) {
7809                         devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7810                             "Routing Event to event handler #%d\n",
7811                             ioc->name, cb_idx));
7812                         r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7813                         handlers++;
7814                 }
7815         }
7816         /* FIXME?  Examine results here? */
7817
7818         /*
7819          *  If needed, send (a single) EventAck.
7820          */
7821         if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7822                 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7823                         "EventAck required\n",ioc->name));
7824                 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7825                         devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7826                                         ioc->name, ii));
7827                 }
7828         }
7829
7830         *evHandlers = handlers;
7831         return r;
7832 }
7833
7834 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7835 /**
7836  *      mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7837  *      @ioc: Pointer to MPT_ADAPTER structure
7838  *      @log_info: U32 LogInfo reply word from the IOC
7839  *
7840  *      Refer to lsi/mpi_log_fc.h.
7841  */
7842 static void
7843 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7844 {
7845         char *desc = "unknown";
7846
7847         switch (log_info & 0xFF000000) {
7848         case MPI_IOCLOGINFO_FC_INIT_BASE:
7849                 desc = "FCP Initiator";
7850                 break;
7851         case MPI_IOCLOGINFO_FC_TARGET_BASE:
7852                 desc = "FCP Target";
7853                 break;
7854         case MPI_IOCLOGINFO_FC_LAN_BASE:
7855                 desc = "LAN";
7856                 break;
7857         case MPI_IOCLOGINFO_FC_MSG_BASE:
7858                 desc = "MPI Message Layer";
7859                 break;
7860         case MPI_IOCLOGINFO_FC_LINK_BASE:
7861                 desc = "FC Link";
7862                 break;
7863         case MPI_IOCLOGINFO_FC_CTX_BASE:
7864                 desc = "Context Manager";
7865                 break;
7866         case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7867                 desc = "Invalid Field Offset";
7868                 break;
7869         case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7870                 desc = "State Change Info";
7871                 break;
7872         }
7873
7874         printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7875                         ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7876 }
7877
7878 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7879 /**
7880  *      mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7881  *      @ioc: Pointer to MPT_ADAPTER structure
7882  *      @log_info: U32 LogInfo word from the IOC
7883  *
7884  *      Refer to lsi/sp_log.h.
7885  */
7886 static void
7887 mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7888 {
7889         u32 info = log_info & 0x00FF0000;
7890         char *desc = "unknown";
7891
7892         switch (info) {
7893         case 0x00010000:
7894                 desc = "bug! MID not found";
7895                 break;
7896
7897         case 0x00020000:
7898                 desc = "Parity Error";
7899                 break;
7900
7901         case 0x00030000:
7902                 desc = "ASYNC Outbound Overrun";
7903                 break;
7904
7905         case 0x00040000:
7906                 desc = "SYNC Offset Error";
7907                 break;
7908
7909         case 0x00050000:
7910                 desc = "BM Change";
7911                 break;
7912
7913         case 0x00060000:
7914                 desc = "Msg In Overflow";
7915                 break;
7916
7917         case 0x00070000:
7918                 desc = "DMA Error";
7919                 break;
7920
7921         case 0x00080000:
7922                 desc = "Outbound DMA Overrun";
7923                 break;
7924
7925         case 0x00090000:
7926                 desc = "Task Management";
7927                 break;
7928
7929         case 0x000A0000:
7930                 desc = "Device Problem";
7931                 break;
7932
7933         case 0x000B0000:
7934                 desc = "Invalid Phase Change";
7935                 break;
7936
7937         case 0x000C0000:
7938                 desc = "Untagged Table Size";
7939                 break;
7940
7941         }
7942
7943         printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7944 }
7945
7946 /* strings for sas loginfo */
7947         static char *originator_str[] = {
7948                 "IOP",                                          /* 00h */
7949                 "PL",                                           /* 01h */
7950                 "IR"                                            /* 02h */
7951         };
7952         static char *iop_code_str[] = {
7953                 NULL,                                           /* 00h */
7954                 "Invalid SAS Address",                          /* 01h */
7955                 NULL,                                           /* 02h */
7956                 "Invalid Page",                                 /* 03h */
7957                 "Diag Message Error",                           /* 04h */
7958                 "Task Terminated",                              /* 05h */
7959                 "Enclosure Management",                         /* 06h */
7960                 "Target Mode"                                   /* 07h */
7961         };
7962         static char *pl_code_str[] = {
7963                 NULL,                                           /* 00h */
7964                 "Open Failure",                                 /* 01h */
7965                 "Invalid Scatter Gather List",                  /* 02h */
7966                 "Wrong Relative Offset or Frame Length",        /* 03h */
7967                 "Frame Transfer Error",                         /* 04h */
7968                 "Transmit Frame Connected Low",                 /* 05h */
7969                 "SATA Non-NCQ RW Error Bit Set",                /* 06h */
7970                 "SATA Read Log Receive Data Error",             /* 07h */
7971                 "SATA NCQ Fail All Commands After Error",       /* 08h */
7972                 "SATA Error in Receive Set Device Bit FIS",     /* 09h */
7973                 "Receive Frame Invalid Message",                /* 0Ah */
7974                 "Receive Context Message Valid Error",          /* 0Bh */
7975                 "Receive Frame Current Frame Error",            /* 0Ch */
7976                 "SATA Link Down",                               /* 0Dh */
7977                 "Discovery SATA Init W IOS",                    /* 0Eh */
7978                 "Config Invalid Page",                          /* 0Fh */
7979                 "Discovery SATA Init Timeout",                  /* 10h */
7980                 "Reset",                                        /* 11h */
7981                 "Abort",                                        /* 12h */
7982                 "IO Not Yet Executed",                          /* 13h */
7983                 "IO Executed",                                  /* 14h */
7984                 "Persistent Reservation Out Not Affiliation "
7985                     "Owner",                                    /* 15h */
7986                 "Open Transmit DMA Abort",                      /* 16h */
7987                 "IO Device Missing Delay Retry",                /* 17h */
7988                 "IO Cancelled Due to Receive Error",            /* 18h */
7989                 NULL,                                           /* 19h */
7990                 NULL,                                           /* 1Ah */
7991                 NULL,                                           /* 1Bh */
7992                 NULL,                                           /* 1Ch */
7993                 NULL,                                           /* 1Dh */
7994                 NULL,                                           /* 1Eh */
7995                 NULL,                                           /* 1Fh */
7996                 "Enclosure Management"                          /* 20h */
7997         };
7998         static char *ir_code_str[] = {
7999                 "Raid Action Error",                            /* 00h */
8000                 NULL,                                           /* 00h */
8001                 NULL,                                           /* 01h */
8002                 NULL,                                           /* 02h */
8003                 NULL,                                           /* 03h */
8004                 NULL,                                           /* 04h */
8005                 NULL,                                           /* 05h */
8006                 NULL,                                           /* 06h */
8007                 NULL                                            /* 07h */
8008         };
8009         static char *raid_sub_code_str[] = {
8010                 NULL,                                           /* 00h */
8011                 "Volume Creation Failed: Data Passed too "
8012                     "Large",                                    /* 01h */
8013                 "Volume Creation Failed: Duplicate Volumes "
8014                     "Attempted",                                /* 02h */
8015                 "Volume Creation Failed: Max Number "
8016                     "Supported Volumes Exceeded",               /* 03h */
8017                 "Volume Creation Failed: DMA Error",            /* 04h */
8018                 "Volume Creation Failed: Invalid Volume Type",  /* 05h */
8019                 "Volume Creation Failed: Error Reading "
8020                     "MFG Page 4",                               /* 06h */
8021                 "Volume Creation Failed: Creating Internal "
8022                     "Structures",                               /* 07h */
8023                 NULL,                                           /* 08h */
8024                 NULL,                                           /* 09h */
8025                 NULL,                                           /* 0Ah */
8026                 NULL,                                           /* 0Bh */
8027                 NULL,                                           /* 0Ch */
8028                 NULL,                                           /* 0Dh */
8029                 NULL,                                           /* 0Eh */
8030                 NULL,                                           /* 0Fh */
8031                 "Activation failed: Already Active Volume",     /* 10h */
8032                 "Activation failed: Unsupported Volume Type",   /* 11h */
8033                 "Activation failed: Too Many Active Volumes",   /* 12h */
8034                 "Activation failed: Volume ID in Use",          /* 13h */
8035                 "Activation failed: Reported Failure",          /* 14h */
8036                 "Activation failed: Importing a Volume",        /* 15h */
8037                 NULL,                                           /* 16h */
8038                 NULL,                                           /* 17h */
8039                 NULL,                                           /* 18h */
8040                 NULL,                                           /* 19h */
8041                 NULL,                                           /* 1Ah */
8042                 NULL,                                           /* 1Bh */
8043                 NULL,                                           /* 1Ch */
8044                 NULL,                                           /* 1Dh */
8045                 NULL,                                           /* 1Eh */
8046                 NULL,                                           /* 1Fh */
8047                 "Phys Disk failed: Too Many Phys Disks",        /* 20h */
8048                 "Phys Disk failed: Data Passed too Large",      /* 21h */
8049                 "Phys Disk failed: DMA Error",                  /* 22h */
8050                 "Phys Disk failed: Invalid <channel:id>",       /* 23h */
8051                 "Phys Disk failed: Creating Phys Disk Config "
8052                     "Page",                                     /* 24h */
8053                 NULL,                                           /* 25h */
8054                 NULL,                                           /* 26h */
8055                 NULL,                                           /* 27h */
8056                 NULL,                                           /* 28h */
8057                 NULL,                                           /* 29h */
8058                 NULL,                                           /* 2Ah */
8059                 NULL,                                           /* 2Bh */
8060                 NULL,                                           /* 2Ch */
8061                 NULL,                                           /* 2Dh */
8062                 NULL,                                           /* 2Eh */
8063                 NULL,                                           /* 2Fh */
8064                 "Compatibility Error: IR Disabled",             /* 30h */
8065                 "Compatibility Error: Inquiry Command Failed",  /* 31h */
8066                 "Compatibility Error: Device not Direct Access "
8067                     "Device ",                                  /* 32h */
8068                 "Compatibility Error: Removable Device Found",  /* 33h */
8069                 "Compatibility Error: Device SCSI Version not "
8070                     "2 or Higher",                              /* 34h */
8071                 "Compatibility Error: SATA Device, 48 BIT LBA "
8072                     "not Supported",                            /* 35h */
8073                 "Compatibility Error: Device doesn't have "
8074                     "512 Byte Block Sizes",                     /* 36h */
8075                 "Compatibility Error: Volume Type Check Failed", /* 37h */
8076                 "Compatibility Error: Volume Type is "
8077                     "Unsupported by FW",                        /* 38h */
8078                 "Compatibility Error: Disk Drive too Small for "
8079                     "use in Volume",                            /* 39h */
8080                 "Compatibility Error: Phys Disk for Create "
8081                     "Volume not Found",                         /* 3Ah */
8082                 "Compatibility Error: Too Many or too Few "
8083                     "Disks for Volume Type",                    /* 3Bh */
8084                 "Compatibility Error: Disk stripe Sizes "
8085                     "Must be 64KB",                             /* 3Ch */
8086                 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8087         };
8088
8089 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8090 /**
8091  *      mpt_sas_log_info - Log information returned from SAS IOC.
8092  *      @ioc: Pointer to MPT_ADAPTER structure
8093  *      @log_info: U32 LogInfo reply word from the IOC
8094  *      @cb_idx: callback function's handle
8095  *
8096  *      Refer to lsi/mpi_log_sas.h.
8097  **/
8098 static void
8099 mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8100 {
8101 union loginfo_type {
8102         u32     loginfo;
8103         struct {
8104                 u32     subcode:16;
8105                 u32     code:8;
8106                 u32     originator:4;
8107                 u32     bus_type:4;
8108         }dw;
8109 };
8110         union loginfo_type sas_loginfo;
8111         char *originator_desc = NULL;
8112         char *code_desc = NULL;
8113         char *sub_code_desc = NULL;
8114
8115         sas_loginfo.loginfo = log_info;
8116         if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8117             (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8118                 return;
8119
8120         originator_desc = originator_str[sas_loginfo.dw.originator];
8121
8122         switch (sas_loginfo.dw.originator) {
8123
8124                 case 0:  /* IOP */
8125                         if (sas_loginfo.dw.code <
8126                             ARRAY_SIZE(iop_code_str))
8127                                 code_desc = iop_code_str[sas_loginfo.dw.code];
8128                         break;
8129                 case 1:  /* PL */
8130                         if (sas_loginfo.dw.code <
8131                             ARRAY_SIZE(pl_code_str))
8132                                 code_desc = pl_code_str[sas_loginfo.dw.code];
8133                         break;
8134                 case 2:  /* IR */
8135                         if (sas_loginfo.dw.code >=
8136                             ARRAY_SIZE(ir_code_str))
8137                                 break;
8138                         code_desc = ir_code_str[sas_loginfo.dw.code];
8139                         if (sas_loginfo.dw.subcode >=
8140                             ARRAY_SIZE(raid_sub_code_str))
8141                                 break;
8142                         if (sas_loginfo.dw.code == 0)
8143                                 sub_code_desc =
8144                                     raid_sub_code_str[sas_loginfo.dw.subcode];
8145                         break;
8146                 default:
8147                         return;
8148         }
8149
8150         if (sub_code_desc != NULL)
8151                 printk(MYIOC_s_INFO_FMT
8152                         "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8153                         " SubCode={%s} cb_idx %s\n",
8154                         ioc->name, log_info, originator_desc, code_desc,
8155                         sub_code_desc, MptCallbacksName[cb_idx]);
8156         else if (code_desc != NULL)
8157                 printk(MYIOC_s_INFO_FMT
8158                         "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8159                         " SubCode(0x%04x) cb_idx %s\n",
8160                         ioc->name, log_info, originator_desc, code_desc,
8161                         sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8162         else
8163                 printk(MYIOC_s_INFO_FMT
8164                         "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8165                         " SubCode(0x%04x) cb_idx %s\n",
8166                         ioc->name, log_info, originator_desc,
8167                         sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8168                         MptCallbacksName[cb_idx]);
8169 }
8170
8171 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8172 /**
8173  *      mpt_iocstatus_info_config - IOCSTATUS information for config pages
8174  *      @ioc: Pointer to MPT_ADAPTER structure
8175  *      @ioc_status: U32 IOCStatus word from IOC
8176  *      @mf: Pointer to MPT request frame
8177  *
8178  *      Refer to lsi/mpi.h.
8179  **/
8180 static void
8181 mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8182 {
8183         Config_t *pReq = (Config_t *)mf;
8184         char extend_desc[EVENT_DESCR_STR_SZ];
8185         char *desc = NULL;
8186         u32 form;
8187         u8 page_type;
8188
8189         if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8190                 page_type = pReq->ExtPageType;
8191         else
8192                 page_type = pReq->Header.PageType;
8193
8194         /*
8195          * ignore invalid page messages for GET_NEXT_HANDLE
8196          */
8197         form = le32_to_cpu(pReq->PageAddress);
8198         if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8199                 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8200                     page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8201                     page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8202                         if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8203                                 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8204                                 return;
8205                 }
8206                 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8207                         if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8208                                 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8209                                 return;
8210         }
8211
8212         snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8213             "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8214             page_type, pReq->Header.PageNumber, pReq->Action, form);
8215
8216         switch (ioc_status) {
8217
8218         case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8219                 desc = "Config Page Invalid Action";
8220                 break;
8221
8222         case MPI_IOCSTATUS_CONFIG_INVALID_TYPE:   /* 0x0021 */
8223                 desc = "Config Page Invalid Type";
8224                 break;
8225
8226         case MPI_IOCSTATUS_CONFIG_INVALID_PAGE:   /* 0x0022 */
8227                 desc = "Config Page Invalid Page";
8228                 break;
8229
8230         case MPI_IOCSTATUS_CONFIG_INVALID_DATA:   /* 0x0023 */
8231                 desc = "Config Page Invalid Data";
8232                 break;
8233
8234         case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS:    /* 0x0024 */
8235                 desc = "Config Page No Defaults";
8236                 break;
8237
8238         case MPI_IOCSTATUS_CONFIG_CANT_COMMIT:    /* 0x0025 */
8239                 desc = "Config Page Can't Commit";
8240                 break;
8241         }
8242
8243         if (!desc)
8244                 return;
8245
8246         dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8247             ioc->name, ioc_status, desc, extend_desc));
8248 }
8249
8250 /**
8251  *      mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8252  *      @ioc: Pointer to MPT_ADAPTER structure
8253  *      @ioc_status: U32 IOCStatus word from IOC
8254  *      @mf: Pointer to MPT request frame
8255  *
8256  *      Refer to lsi/mpi.h.
8257  **/
8258 static void
8259 mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8260 {
8261         u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8262         char *desc = NULL;
8263
8264         switch (status) {
8265
8266 /****************************************************************************/
8267 /*  Common IOCStatus values for all replies                                 */
8268 /****************************************************************************/
8269
8270         case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8271                 desc = "Invalid Function";
8272                 break;
8273
8274         case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8275                 desc = "Busy";
8276                 break;
8277
8278         case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8279                 desc = "Invalid SGL";
8280                 break;
8281
8282         case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8283                 desc = "Internal Error";
8284                 break;
8285
8286         case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8287                 desc = "Reserved";
8288                 break;
8289
8290         case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8291                 desc = "Insufficient Resources";
8292                 break;
8293
8294         case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8295                 desc = "Invalid Field";
8296                 break;
8297
8298         case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8299                 desc = "Invalid State";
8300                 break;
8301
8302 /****************************************************************************/
8303 /*  Config IOCStatus values                                                 */
8304 /****************************************************************************/
8305
8306         case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8307         case MPI_IOCSTATUS_CONFIG_INVALID_TYPE:   /* 0x0021 */
8308         case MPI_IOCSTATUS_CONFIG_INVALID_PAGE:   /* 0x0022 */
8309         case MPI_IOCSTATUS_CONFIG_INVALID_DATA:   /* 0x0023 */
8310         case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS:    /* 0x0024 */
8311         case MPI_IOCSTATUS_CONFIG_CANT_COMMIT:    /* 0x0025 */
8312                 mpt_iocstatus_info_config(ioc, status, mf);
8313                 break;
8314
8315 /****************************************************************************/
8316 /*  SCSIIO Reply (SPI, FCP, SAS) initiator values                           */
8317 /*                                                                          */
8318 /*  Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8319 /*                                                                          */
8320 /****************************************************************************/
8321
8322         case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8323         case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8324         case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8325         case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8326         case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8327         case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8328         case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8329         case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8330         case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8331         case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8332         case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8333         case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8334         case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8335                 break;
8336
8337 /****************************************************************************/
8338 /*  SCSI Target values                                                      */
8339 /****************************************************************************/
8340
8341         case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8342                 desc = "Target: Priority IO";
8343                 break;
8344
8345         case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8346                 desc = "Target: Invalid Port";
8347                 break;
8348
8349         case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8350                 desc = "Target Invalid IO Index:";
8351                 break;
8352
8353         case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8354                 desc = "Target: Aborted";
8355                 break;
8356
8357         case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8358                 desc = "Target: No Conn Retryable";
8359                 break;
8360
8361         case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8362                 desc = "Target: No Connection";
8363                 break;
8364
8365         case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8366                 desc = "Target: Transfer Count Mismatch";
8367                 break;
8368
8369         case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8370                 desc = "Target: STS Data not Sent";
8371                 break;
8372
8373         case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8374                 desc = "Target: Data Offset Error";
8375                 break;
8376
8377         case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8378                 desc = "Target: Too Much Write Data";
8379                 break;
8380
8381         case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8382                 desc = "Target: IU Too Short";
8383                 break;
8384
8385         case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8386                 desc = "Target: ACK NAK Timeout";
8387                 break;
8388
8389         case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8390                 desc = "Target: Nak Received";
8391                 break;
8392
8393 /****************************************************************************/
8394 /*  Fibre Channel Direct Access values                                      */
8395 /****************************************************************************/
8396
8397         case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8398                 desc = "FC: Aborted";
8399                 break;
8400
8401         case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8402                 desc = "FC: RX ID Invalid";
8403                 break;
8404
8405         case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8406                 desc = "FC: DID Invalid";
8407                 break;
8408
8409         case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8410                 desc = "FC: Node Logged Out";
8411                 break;
8412
8413         case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8414                 desc = "FC: Exchange Canceled";
8415                 break;
8416
8417 /****************************************************************************/
8418 /*  LAN values                                                              */
8419 /****************************************************************************/
8420
8421         case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8422                 desc = "LAN: Device not Found";
8423                 break;
8424
8425         case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8426                 desc = "LAN: Device Failure";
8427                 break;
8428
8429         case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8430                 desc = "LAN: Transmit Error";
8431                 break;
8432
8433         case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8434                 desc = "LAN: Transmit Aborted";
8435                 break;
8436
8437         case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8438                 desc = "LAN: Receive Error";
8439                 break;
8440
8441         case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8442                 desc = "LAN: Receive Aborted";
8443                 break;
8444
8445         case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8446                 desc = "LAN: Partial Packet";
8447                 break;
8448
8449         case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8450                 desc = "LAN: Canceled";
8451                 break;
8452
8453 /****************************************************************************/
8454 /*  Serial Attached SCSI values                                             */
8455 /****************************************************************************/
8456
8457         case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8458                 desc = "SAS: SMP Request Failed";
8459                 break;
8460
8461         case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8462                 desc = "SAS: SMP Data Overrun";
8463                 break;
8464
8465         default:
8466                 desc = "Others";
8467                 break;
8468         }
8469
8470         if (!desc)
8471                 return;
8472
8473         dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8474             ioc->name, status, desc));
8475 }
8476
8477 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8478 EXPORT_SYMBOL(mpt_attach);
8479 EXPORT_SYMBOL(mpt_detach);
8480 #ifdef CONFIG_PM
8481 EXPORT_SYMBOL(mpt_resume);
8482 EXPORT_SYMBOL(mpt_suspend);
8483 #endif
8484 EXPORT_SYMBOL(ioc_list);
8485 EXPORT_SYMBOL(mpt_register);
8486 EXPORT_SYMBOL(mpt_deregister);
8487 EXPORT_SYMBOL(mpt_event_register);
8488 EXPORT_SYMBOL(mpt_event_deregister);
8489 EXPORT_SYMBOL(mpt_reset_register);
8490 EXPORT_SYMBOL(mpt_reset_deregister);
8491 EXPORT_SYMBOL(mpt_device_driver_register);
8492 EXPORT_SYMBOL(mpt_device_driver_deregister);
8493 EXPORT_SYMBOL(mpt_get_msg_frame);
8494 EXPORT_SYMBOL(mpt_put_msg_frame);
8495 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8496 EXPORT_SYMBOL(mpt_free_msg_frame);
8497 EXPORT_SYMBOL(mpt_send_handshake_request);
8498 EXPORT_SYMBOL(mpt_verify_adapter);
8499 EXPORT_SYMBOL(mpt_GetIocState);
8500 EXPORT_SYMBOL(mpt_print_ioc_summary);
8501 EXPORT_SYMBOL(mpt_HardResetHandler);
8502 EXPORT_SYMBOL(mpt_config);
8503 EXPORT_SYMBOL(mpt_findImVolumes);
8504 EXPORT_SYMBOL(mpt_alloc_fw_memory);
8505 EXPORT_SYMBOL(mpt_free_fw_memory);
8506 EXPORT_SYMBOL(mptbase_sas_persist_operation);
8507 EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8508
8509 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8510 /**
8511  *      fusion_init - Fusion MPT base driver initialization routine.
8512  *
8513  *      Returns 0 for success, non-zero for failure.
8514  */
8515 static int __init
8516 fusion_init(void)
8517 {
8518         u8 cb_idx;
8519
8520         show_mptmod_ver(my_NAME, my_VERSION);
8521         printk(KERN_INFO COPYRIGHT "\n");
8522
8523         for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8524                 MptCallbacks[cb_idx] = NULL;
8525                 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8526                 MptEvHandlers[cb_idx] = NULL;
8527                 MptResetHandlers[cb_idx] = NULL;
8528         }
8529
8530         /*  Register ourselves (mptbase) in order to facilitate
8531          *  EventNotification handling.
8532          */
8533         mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8534             "mptbase_reply");
8535
8536         /* Register for hard reset handling callbacks.
8537          */
8538         mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8539
8540 #ifdef CONFIG_PROC_FS
8541         (void) procmpt_create();
8542 #endif
8543         return 0;
8544 }
8545
8546 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8547 /**
8548  *      fusion_exit - Perform driver unload cleanup.
8549  *
8550  *      This routine frees all resources associated with each MPT adapter
8551  *      and removes all %MPT_PROCFS_MPTBASEDIR entries.
8552  */
8553 static void __exit
8554 fusion_exit(void)
8555 {
8556
8557         mpt_reset_deregister(mpt_base_index);
8558
8559 #ifdef CONFIG_PROC_FS
8560         procmpt_destroy();
8561 #endif
8562 }
8563
8564 module_init(fusion_init);
8565 module_exit(fusion_exit);