drivers/message/fusion/mptbase.c

   1 /*
   2  *  linux/drivers/message/fusion/mptbase.c
   3  *      This is the Fusion MPT base driver which supports multiple
   4  *      (SCSI + LAN) specialized protocol drivers.
   5  *      For use with LSI PCI chip/adapter(s)
   6  *      running LSI Fusion MPT (Message Passing Technology) firmware.
   7  *
   8  *  Copyright (c) 1999-2008 LSI Corporation
   9  *  (mailto:DL-MPTFusionLinux@lsi.com)
  10  *
  11  */
  12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  13 /*
  14     This program is free software; you can redistribute it and/or modify
  15     it under the terms of the GNU General Public License as published by
  16     the Free Software Foundation; version 2 of the License.
  17
  18     This program is distributed in the hope that it will be useful,
  19     but WITHOUT ANY WARRANTY; without even the implied warranty of
  20     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21     GNU General Public License for more details.
  22
  23     NO WARRANTY
  24     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  25     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  26     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  27     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  28     solely responsible for determining the appropriateness of using and
  29     distributing the Program and assumes all risks associated with its
  30     exercise of rights under this Agreement, including but not limited to
  31     the risks and costs of program errors, damage to or loss of data,
  32     programs or equipment, and unavailability or interruption of operations.
  33
  34     DISCLAIMER OF LIABILITY
  35     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  36     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  38     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  39     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  40     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  41     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  42
  43     You should have received a copy of the GNU General Public License
  44     along with this program; if not, write to the Free Software
  45     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  46 */
  47 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  48
  49 #include <linux/kernel.h>
  50 #include <linux/module.h>
  51 #include <linux/errno.h>
  52 #include <linux/init.h>
  53 #include <linux/seq_file.h>
  54 #include <linux/slab.h>
  55 #include <linux/types.h>
  56 #include <linux/pci.h>
  57 #include <linux/kdev_t.h>
  58 #include <linux/blkdev.h>
  59 #include <linux/delay.h>
  60 #include <linux/interrupt.h>            /* needed for in_interrupt() proto */
  61 #include <linux/dma-mapping.h>
  62 #include <linux/kthread.h>
  63 #include <scsi/scsi_host.h>
  64
  65 #include "mptbase.h"
  66 #include "lsi/mpi_log_fc.h"
  67
  68 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  69 #define my_NAME         "Fusion MPT base driver"
  70 #define my_VERSION      MPT_LINUX_VERSION_COMMON
  71 #define MYNAM           "mptbase"
  72
  73 MODULE_AUTHOR(MODULEAUTHOR);
  74 MODULE_DESCRIPTION(my_NAME);
  75 MODULE_LICENSE("GPL");
  76 MODULE_VERSION(my_VERSION);
  77
  78 /*
  79  *  cmd line parameters
  80  */
  81
  82 static int mpt_msi_enable_spi;
  83 module_param(mpt_msi_enable_spi, int, 0);
  84 MODULE_PARM_DESC(mpt_msi_enable_spi,
  85                  " Enable MSI Support for SPI controllers (default=0)");
  86
  87 static int mpt_msi_enable_fc;
  88 module_param(mpt_msi_enable_fc, int, 0);
  89 MODULE_PARM_DESC(mpt_msi_enable_fc,
  90                  " Enable MSI Support for FC controllers (default=0)");
  91
  92 static int mpt_msi_enable_sas;
  93 module_param(mpt_msi_enable_sas, int, 0);
  94 MODULE_PARM_DESC(mpt_msi_enable_sas,
  95                  " Enable MSI Support for SAS controllers (default=0)");
  96
  97 static int mpt_channel_mapping;
  98 module_param(mpt_channel_mapping, int, 0);
  99 MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
 100
 101 static int mpt_debug_level;
 102 static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
 103 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
 104                   &mpt_debug_level, 0600);
 105 MODULE_PARM_DESC(mpt_debug_level,
 106                  " debug level - refer to mptdebug.h - (default=0)");
 107
 108 int mpt_fwfault_debug;
 109 EXPORT_SYMBOL(mpt_fwfault_debug);
 110 module_param(mpt_fwfault_debug, int, 0600);
 111 MODULE_PARM_DESC(mpt_fwfault_debug,
 112                  "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
 113
 114 static char     MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
 115                                 [MPT_MAX_CALLBACKNAME_LEN+1];
 116
 117 #ifdef MFCNT
 118 static int mfcounter = 0;
 119 #define PRINT_MF_COUNT 20000
 120 #endif
 121
 122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 123 /*
 124  *  Public data...
 125  */
 126
 127 #define WHOINIT_UNKNOWN         0xAA
 128
 129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 130 /*
 131  *  Private data...
 132  */
 133                                         /* Adapter link list */
 134 LIST_HEAD(ioc_list);
 135                                         /* Callback lookup table */
 136 static MPT_CALLBACK              MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
 137                                         /* Protocol driver class lookup table */
 138 static int                       MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
 139                                         /* Event handler lookup table */
 140 static MPT_EVHANDLER             MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 141                                         /* Reset handler lookup table */
 142 static MPT_RESETHANDLER          MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 143 static struct mpt_pci_driver    *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 144
 145 #ifdef CONFIG_PROC_FS
 146 static struct proc_dir_entry    *mpt_proc_root_dir;
 147 #endif
 148
 149 /*
 150  *  Driver Callback Index's
 151  */
 152 static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
 153 static u8 last_drv_idx;
 154
 155 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 156 /*
 157  *  Forward protos...
 158  */
 159 static irqreturn_t mpt_interrupt(int irq, void *bus_id);
 160 static int      mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
 161                 MPT_FRAME_HDR *reply);
 162 static int      mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
 163                         u32 *req, int replyBytes, u16 *u16reply, int maxwait,
 164                         int sleepFlag);
 165 static int      mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
 166 static void     mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
 167 static void     mpt_adapter_disable(MPT_ADAPTER *ioc);
 168 static void     mpt_adapter_dispose(MPT_ADAPTER *ioc);
 169
 170 static void     MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
 171 static int      MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
 172 static int      GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
 173 static int      GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
 174 static int      SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
 175 static int      SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
 176 static int      mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
 177 static int      mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
 178 static int      mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
 179 static int      KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
 180 static int      SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
 181 static int      PrimeIocFifos(MPT_ADAPTER *ioc);
 182 static int      WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
 183 static int      WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
 184 static int      WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
 185 static int      GetLanConfigPages(MPT_ADAPTER *ioc);
 186 static int      GetIoUnitPage2(MPT_ADAPTER *ioc);
 187 int             mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
 188 static int      mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
 189 static int      mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
 190 static void     mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
 191 static void     mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
 192 static void     mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
 193 static int      SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
 194         int sleepFlag);
 195 static int      SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
 196 static int      mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
 197 static int      mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
 198
 199 #ifdef CONFIG_PROC_FS
 200 static const struct file_operations mpt_summary_proc_fops;
 201 static const struct file_operations mpt_version_proc_fops;
 202 static const struct file_operations mpt_iocinfo_proc_fops;
 203 #endif
 204 static void     mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
 205
 206 static int      ProcessEventNotification(MPT_ADAPTER *ioc,
 207                 EventNotificationReply_t *evReply, int *evHandlers);
 208 static void     mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
 209 static void     mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
 210 static void     mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
 211 static void     mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
 212 static int      mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
 213 static void     mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
 214
 215 /* module entry point */
 216 static int  __init    fusion_init  (void);
 217 static void __exit    fusion_exit  (void);
 218
 219 #define CHIPREG_READ32(addr)            readl_relaxed(addr)
 220 #define CHIPREG_READ32_dmasync(addr)    readl(addr)
 221 #define CHIPREG_WRITE32(addr,val)       writel(val, addr)
 222 #define CHIPREG_PIO_WRITE32(addr,val)   outl(val, (unsigned long)addr)
 223 #define CHIPREG_PIO_READ32(addr)        inl((unsigned long)addr)
 224
 225 static void
 226 pci_disable_io_access(struct pci_dev *pdev)
 227 {
 228         u16 command_reg;
 229
 230         pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
 231         command_reg &= ~1;
 232         pci_write_config_word(pdev, PCI_COMMAND, command_reg);
 233 }
 234
 235 static void
 236 pci_enable_io_access(struct pci_dev *pdev)
 237 {
 238         u16 command_reg;
 239
 240         pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
 241         command_reg |= 1;
 242         pci_write_config_word(pdev, PCI_COMMAND, command_reg);
 243 }
 244
 245 static int mpt_set_debug_level(const char *val, struct kernel_param *kp)
 246 {
 247         int ret = param_set_int(val, kp);
 248         MPT_ADAPTER *ioc;
 249
 250         if (ret)
 251                 return ret;
 252
 253         list_for_each_entry(ioc, &ioc_list, list)
 254                 ioc->debug_level = mpt_debug_level;
 255         return 0;
 256 }
 257
 258 /**
 259  *      mpt_get_cb_idx - obtain cb_idx for registered driver
 260  *      @dclass: class driver enum
 261  *
 262  *      Returns cb_idx, or zero means it wasn't found
 263  **/
 264 static u8
 265 mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
 266 {
 267         u8 cb_idx;
 268
 269         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
 270                 if (MptDriverClass[cb_idx] == dclass)
 271                         return cb_idx;
 272         return 0;
 273 }
 274
 275 /**
 276  * mpt_is_discovery_complete - determine if discovery has completed
 277  * @ioc: per adatper instance
 278  *
 279  * Returns 1 when discovery completed, else zero.
 280  */
 281 static int
 282 mpt_is_discovery_complete(MPT_ADAPTER *ioc)
 283 {
 284         ConfigExtendedPageHeader_t hdr;
 285         CONFIGPARMS cfg;
 286         SasIOUnitPage0_t *buffer;
 287         dma_addr_t dma_handle;
 288         int rc = 0;
 289
 290         memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
 291         memset(&cfg, 0, sizeof(CONFIGPARMS));
 292         hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
 293         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 294         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
 295         cfg.cfghdr.ehdr = &hdr;
 296         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 297
 298         if ((mpt_config(ioc, &cfg)))
 299                 goto out;
 300         if (!hdr.ExtPageLength)
 301                 goto out;
 302
 303         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 304             &dma_handle);
 305         if (!buffer)
 306                 goto out;
 307
 308         cfg.physAddr = dma_handle;
 309         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 310
 311         if ((mpt_config(ioc, &cfg)))
 312                 goto out_free_consistent;
 313
 314         if (!(buffer->PhyData[0].PortFlags &
 315             MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
 316                 rc = 1;
 317
 318  out_free_consistent:
 319         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 320             buffer, dma_handle);
 321  out:
 322         return rc;
 323 }
 324
 325
 326 /**
 327  *  mpt_remove_dead_ioc_func - kthread context to remove dead ioc
 328  * @arg: input argument, used to derive ioc
 329  *
 330  * Return 0 if controller is removed from pci subsystem.
 331  * Return -1 for other case.
 332  */
 333 static int mpt_remove_dead_ioc_func(void *arg)
 334 {
 335         MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
 336         struct pci_dev *pdev;
 337
 338         if ((ioc == NULL))
 339                 return -1;
 340
 341         pdev = ioc->pcidev;
 342         if ((pdev == NULL))
 343                 return -1;
 344
 345         pci_stop_and_remove_bus_device_locked(pdev);
 346         return 0;
 347 }
 348
 349
 350
 351 /**
 352  *      mpt_fault_reset_work - work performed on workq after ioc fault
 353  *      @work: input argument, used to derive ioc
 354  *
 355 **/
 356 static void
 357 mpt_fault_reset_work(struct work_struct *work)
 358 {
 359         MPT_ADAPTER     *ioc =
 360             container_of(work, MPT_ADAPTER, fault_reset_work.work);
 361         u32              ioc_raw_state;
 362         int              rc;
 363         unsigned long    flags;
 364         MPT_SCSI_HOST   *hd;
 365         struct task_struct *p;
 366
 367         if (ioc->ioc_reset_in_progress || !ioc->active)
 368                 goto out;
 369
 370
 371         ioc_raw_state = mpt_GetIocState(ioc, 0);
 372         if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
 373                 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
 374                     ioc->name, __func__);
 375
 376                 /*
 377                  * Call mptscsih_flush_pending_cmds callback so that we
 378                  * flush all pending commands back to OS.
 379                  * This call is required to aovid deadlock at block layer.
 380                  * Dead IOC will fail to do diag reset,and this call is safe
 381                  * since dead ioc will never return any command back from HW.
 382                  */
 383                 hd = shost_priv(ioc->sh);
 384                 ioc->schedule_dead_ioc_flush_running_cmds(hd);
 385
 386                 /*Remove the Dead Host */
 387                 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
 388                                 "mpt_dead_ioc_%d", ioc->id);
 389                 if (IS_ERR(p))  {
 390                         printk(MYIOC_s_ERR_FMT
 391                                 "%s: Running mpt_dead_ioc thread failed !\n",
 392                                 ioc->name, __func__);
 393                 } else {
 394                         printk(MYIOC_s_WARN_FMT
 395                                 "%s: Running mpt_dead_ioc thread success !\n",
 396                                 ioc->name, __func__);
 397                 }
 398                 return; /* don't rearm timer */
 399         }
 400
 401         if ((ioc_raw_state & MPI_IOC_STATE_MASK)
 402                         == MPI_IOC_STATE_FAULT) {
 403                 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
 404                        ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
 405                 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
 406                        ioc->name, __func__);
 407                 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
 408                 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
 409                        __func__, (rc == 0) ? "success" : "failed");
 410                 ioc_raw_state = mpt_GetIocState(ioc, 0);
 411                 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
 412                         printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
 413                             "reset (%04xh)\n", ioc->name, ioc_raw_state &
 414                             MPI_DOORBELL_DATA_MASK);
 415         } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
 416                 if ((mpt_is_discovery_complete(ioc))) {
 417                         devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
 418                             "discovery_quiesce_io flag\n", ioc->name));
 419                         ioc->sas_discovery_quiesce_io = 0;
 420                 }
 421         }
 422
 423  out:
 424         /*
 425          * Take turns polling alternate controller
 426          */
 427         if (ioc->alt_ioc)
 428                 ioc = ioc->alt_ioc;
 429
 430         /* rearm the timer */
 431         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
 432         if (ioc->reset_work_q)
 433                 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
 434                         msecs_to_jiffies(MPT_POLLING_INTERVAL));
 435         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 436 }
 437
 438
 439 /*
 440  *  Process turbo (context) reply...
 441  */
 442 static void
 443 mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
 444 {
 445         MPT_FRAME_HDR *mf = NULL;
 446         MPT_FRAME_HDR *mr = NULL;
 447         u16 req_idx = 0;
 448         u8 cb_idx;
 449
 450         dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
 451                                 ioc->name, pa));
 452
 453         switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
 454         case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
 455                 req_idx = pa & 0x0000FFFF;
 456                 cb_idx = (pa & 0x00FF0000) >> 16;
 457                 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
 458                 break;
 459         case MPI_CONTEXT_REPLY_TYPE_LAN:
 460                 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
 461                 /*
 462                  *  Blind set of mf to NULL here was fatal
 463                  *  after lan_reply says "freeme"
 464                  *  Fix sort of combined with an optimization here;
 465                  *  added explicit check for case where lan_reply
 466                  *  was just returning 1 and doing nothing else.
 467                  *  For this case skip the callback, but set up
 468                  *  proper mf value first here:-)
 469                  */
 470                 if ((pa & 0x58000000) == 0x58000000) {
 471                         req_idx = pa & 0x0000FFFF;
 472                         mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
 473                         mpt_free_msg_frame(ioc, mf);
 474                         mb();
 475                         return;
 476                         break;
 477                 }
 478                 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
 479                 break;
 480         case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
 481                 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
 482                 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
 483                 break;
 484         default:
 485                 cb_idx = 0;
 486                 BUG();
 487         }
 488
 489         /*  Check for (valid) IO callback!  */
 490         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
 491                 MptCallbacks[cb_idx] == NULL) {
 492                 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
 493                                 __func__, ioc->name, cb_idx);
 494                 goto out;
 495         }
 496
 497         if (MptCallbacks[cb_idx](ioc, mf, mr))
 498                 mpt_free_msg_frame(ioc, mf);
 499  out:
 500         mb();
 501 }
 502
 503 static void
 504 mpt_reply(MPT_ADAPTER *ioc, u32 pa)
 505 {
 506         MPT_FRAME_HDR   *mf;
 507         MPT_FRAME_HDR   *mr;
 508         u16              req_idx;
 509         u8               cb_idx;
 510         int              freeme;
 511
 512         u32 reply_dma_low;
 513         u16 ioc_stat;
 514
 515         /* non-TURBO reply!  Hmmm, something may be up...
 516          *  Newest turbo reply mechanism; get address
 517          *  via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
 518          */
 519
 520         /* Map DMA address of reply header to cpu address.
 521          * pa is 32 bits - but the dma address may be 32 or 64 bits
 522          * get offset based only only the low addresses
 523          */
 524
 525         reply_dma_low = (pa <<= 1);
 526         mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
 527                          (reply_dma_low - ioc->reply_frames_low_dma));
 528
 529         req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
 530         cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
 531         mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
 532
 533         dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
 534                         ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
 535         DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
 536
 537          /*  Check/log IOC log info
 538          */
 539         ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
 540         if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
 541                 u32      log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
 542                 if (ioc->bus_type == FC)
 543                         mpt_fc_log_info(ioc, log_info);
 544                 else if (ioc->bus_type == SPI)
 545                         mpt_spi_log_info(ioc, log_info);
 546                 else if (ioc->bus_type == SAS)
 547                         mpt_sas_log_info(ioc, log_info, cb_idx);
 548         }
 549
 550         if (ioc_stat & MPI_IOCSTATUS_MASK)
 551                 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
 552
 553         /*  Check for (valid) IO callback!  */
 554         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
 555                 MptCallbacks[cb_idx] == NULL) {
 556                 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
 557                                 __func__, ioc->name, cb_idx);
 558                 freeme = 0;
 559                 goto out;
 560         }
 561
 562         freeme = MptCallbacks[cb_idx](ioc, mf, mr);
 563
 564  out:
 565         /*  Flush (non-TURBO) reply with a WRITE!  */
 566         CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
 567
 568         if (freeme)
 569                 mpt_free_msg_frame(ioc, mf);
 570         mb();
 571 }
 572
 573 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 574 /**
 575  *      mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
 576  *      @irq: irq number (not used)
 577  *      @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
 578  *
 579  *      This routine is registered via the request_irq() kernel API call,
 580  *      and handles all interrupts generated from a specific MPT adapter
 581  *      (also referred to as a IO Controller or IOC).
 582  *      This routine must clear the interrupt from the adapter and does
 583  *      so by reading the reply FIFO.  Multiple replies may be processed
 584  *      per single call to this routine.
 585  *
 586  *      This routine handles register-level access of the adapter but
 587  *      dispatches (calls) a protocol-specific callback routine to handle
 588  *      the protocol-specific details of the MPT request completion.
 589  */
 590 static irqreturn_t
 591 mpt_interrupt(int irq, void *bus_id)
 592 {
 593         MPT_ADAPTER *ioc = bus_id;
 594         u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
 595
 596         if (pa == 0xFFFFFFFF)
 597                 return IRQ_NONE;
 598
 599         /*
 600          *  Drain the reply FIFO!
 601          */
 602         do {
 603                 if (pa & MPI_ADDRESS_REPLY_A_BIT)
 604                         mpt_reply(ioc, pa);
 605                 else
 606                         mpt_turbo_reply(ioc, pa);
 607                 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
 608         } while (pa != 0xFFFFFFFF);
 609
 610         return IRQ_HANDLED;
 611 }
 612
 613 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 614 /**
 615  *      mptbase_reply - MPT base driver's callback routine
 616  *      @ioc: Pointer to MPT_ADAPTER structure
 617  *      @req: Pointer to original MPT request frame
 618  *      @reply: Pointer to MPT reply frame (NULL if TurboReply)
 619  *
 620  *      MPT base driver's callback routine; all base driver
 621  *      "internal" request/reply processing is routed here.
 622  *      Currently used for EventNotification and EventAck handling.
 623  *
 624  *      Returns 1 indicating original alloc'd request frame ptr
 625  *      should be freed, or 0 if it shouldn't.
 626  */
 627 static int
 628 mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
 629 {
 630         EventNotificationReply_t *pEventReply;
 631         u8 event;
 632         int evHandlers;
 633         int freereq = 1;
 634
 635         switch (reply->u.hdr.Function) {
 636         case MPI_FUNCTION_EVENT_NOTIFICATION:
 637                 pEventReply = (EventNotificationReply_t *)reply;
 638                 evHandlers = 0;
 639                 ProcessEventNotification(ioc, pEventReply, &evHandlers);
 640                 event = le32_to_cpu(pEventReply->Event) & 0xFF;
 641                 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
 642                         freereq = 0;
 643                 if (event != MPI_EVENT_EVENT_CHANGE)
 644                         break;
 645         case MPI_FUNCTION_CONFIG:
 646         case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
 647                 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 648                 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
 649                 memcpy(ioc->mptbase_cmds.reply, reply,
 650                     min(MPT_DEFAULT_FRAME_SIZE,
 651                         4 * reply->u.reply.MsgLength));
 652                 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
 653                         ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
 654                         complete(&ioc->mptbase_cmds.done);
 655                 } else
 656                         freereq = 0;
 657                 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
 658                         freereq = 1;
 659                 break;
 660         case MPI_FUNCTION_EVENT_ACK:
 661                 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 662                     "EventAck reply received\n", ioc->name));
 663                 break;
 664         default:
 665                 printk(MYIOC_s_ERR_FMT
 666                     "Unexpected msg function (=%02Xh) reply received!\n",
 667                     ioc->name, reply->u.hdr.Function);
 668                 break;
 669         }
 670
 671         /*
 672          *      Conditionally tell caller to free the original
 673          *      EventNotification/EventAck/unexpected request frame!
 674          */
 675         return freereq;
 676 }
 677
 678 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 679 /**
 680  *      mpt_register - Register protocol-specific main callback handler.
 681  *      @cbfunc: callback function pointer
 682  *      @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
 683  *      @func_name: call function's name
 684  *
 685  *      This routine is called by a protocol-specific driver (SCSI host,
 686  *      LAN, SCSI target) to register its reply callback routine.  Each
 687  *      protocol-specific driver must do this before it will be able to
 688  *      use any IOC resources, such as obtaining request frames.
 689  *
 690  *      NOTES: The SCSI protocol driver currently calls this routine thrice
 691  *      in order to register separate callbacks; one for "normal" SCSI IO;
 692  *      one for MptScsiTaskMgmt requests; one for Scan/DV requests.
 693  *
 694  *      Returns u8 valued "handle" in the range (and S.O.D. order)
 695  *      {N,...,7,6,5,...,1} if successful.
 696  *      A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
 697  *      considered an error by the caller.
 698  */
 699 u8
 700 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
 701 {
 702         u8 cb_idx;
 703         last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
 704
 705         /*
 706          *  Search for empty callback slot in this order: {N,...,7,6,5,...,1}
 707          *  (slot/handle 0 is reserved!)
 708          */
 709         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
 710                 if (MptCallbacks[cb_idx] == NULL) {
 711                         MptCallbacks[cb_idx] = cbfunc;
 712                         MptDriverClass[cb_idx] = dclass;
 713                         MptEvHandlers[cb_idx] = NULL;
 714                         last_drv_idx = cb_idx;
 715                         strlcpy(MptCallbacksName[cb_idx], func_name,
 716                                 MPT_MAX_CALLBACKNAME_LEN+1);
 717                         break;
 718                 }
 719         }
 720
 721         return last_drv_idx;
 722 }
 723
 724 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 725 /**
 726  *      mpt_deregister - Deregister a protocol drivers resources.
 727  *      @cb_idx: previously registered callback handle
 728  *
 729  *      Each protocol-specific driver should call this routine when its
 730  *      module is unloaded.
 731  */
 732 void
 733 mpt_deregister(u8 cb_idx)
 734 {
 735         if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
 736                 MptCallbacks[cb_idx] = NULL;
 737                 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
 738                 MptEvHandlers[cb_idx] = NULL;
 739
 740                 last_drv_idx++;
 741         }
 742 }
 743
 744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 745 /**
 746  *      mpt_event_register - Register protocol-specific event callback handler.
 747  *      @cb_idx: previously registered (via mpt_register) callback handle
 748  *      @ev_cbfunc: callback function
 749  *
 750  *      This routine can be called by one or more protocol-specific drivers
 751  *      if/when they choose to be notified of MPT events.
 752  *
 753  *      Returns 0 for success.
 754  */
 755 int
 756 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
 757 {
 758         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 759                 return -1;
 760
 761         MptEvHandlers[cb_idx] = ev_cbfunc;
 762         return 0;
 763 }
 764
 765 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 766 /**
 767  *      mpt_event_deregister - Deregister protocol-specific event callback handler
 768  *      @cb_idx: previously registered callback handle
 769  *
 770  *      Each protocol-specific driver should call this routine
 771  *      when it does not (or can no longer) handle events,
 772  *      or when its module is unloaded.
 773  */
 774 void
 775 mpt_event_deregister(u8 cb_idx)
 776 {
 777         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 778                 return;
 779
 780         MptEvHandlers[cb_idx] = NULL;
 781 }
 782
 783 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 784 /**
 785  *      mpt_reset_register - Register protocol-specific IOC reset handler.
 786  *      @cb_idx: previously registered (via mpt_register) callback handle
 787  *      @reset_func: reset function
 788  *
 789  *      This routine can be called by one or more protocol-specific drivers
 790  *      if/when they choose to be notified of IOC resets.
 791  *
 792  *      Returns 0 for success.
 793  */
 794 int
 795 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
 796 {
 797         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 798                 return -1;
 799
 800         MptResetHandlers[cb_idx] = reset_func;
 801         return 0;
 802 }
 803
 804 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 805 /**
 806  *      mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
 807  *      @cb_idx: previously registered callback handle
 808  *
 809  *      Each protocol-specific driver should call this routine
 810  *      when it does not (or can no longer) handle IOC reset handling,
 811  *      or when its module is unloaded.
 812  */
 813 void
 814 mpt_reset_deregister(u8 cb_idx)
 815 {
 816         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 817                 return;
 818
 819         MptResetHandlers[cb_idx] = NULL;
 820 }
 821
 822 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 823 /**
 824  *      mpt_device_driver_register - Register device driver hooks
 825  *      @dd_cbfunc: driver callbacks struct
 826  *      @cb_idx: MPT protocol driver index
 827  */
 828 int
 829 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
 830 {
 831         MPT_ADAPTER     *ioc;
 832         const struct pci_device_id *id;
 833
 834         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 835                 return -EINVAL;
 836
 837         MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
 838
 839         /* call per pci device probe entry point */
 840         list_for_each_entry(ioc, &ioc_list, list) {
 841                 id = ioc->pcidev->driver ?
 842                     ioc->pcidev->driver->id_table : NULL;
 843                 if (dd_cbfunc->probe)
 844                         dd_cbfunc->probe(ioc->pcidev, id);
 845          }
 846
 847         return 0;
 848 }
 849
 850 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 851 /**
 852  *      mpt_device_driver_deregister - DeRegister device driver hooks
 853  *      @cb_idx: MPT protocol driver index
 854  */
 855 void
 856 mpt_device_driver_deregister(u8 cb_idx)
 857 {
 858         struct mpt_pci_driver *dd_cbfunc;
 859         MPT_ADAPTER     *ioc;
 860
 861         if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
 862                 return;
 863
 864         dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
 865
 866         list_for_each_entry(ioc, &ioc_list, list) {
 867                 if (dd_cbfunc->remove)
 868                         dd_cbfunc->remove(ioc->pcidev);
 869         }
 870
 871         MptDeviceDriverHandlers[cb_idx] = NULL;
 872 }
 873
 874
 875 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 876 /**
 877  *      mpt_get_msg_frame - Obtain an MPT request frame from the pool
 878  *      @cb_idx: Handle of registered MPT protocol driver
 879  *      @ioc: Pointer to MPT adapter structure
 880  *
 881  *      Obtain an MPT request frame from the pool (of 1024) that are
 882  *      allocated per MPT adapter.
 883  *
 884  *      Returns pointer to a MPT request frame or %NULL if none are available
 885  *      or IOC is not active.
 886  */
 887 MPT_FRAME_HDR*
 888 mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
 889 {
 890         MPT_FRAME_HDR *mf;
 891         unsigned long flags;
 892         u16      req_idx;       /* Request index */
 893
 894         /* validate handle and ioc identifier */
 895
 896 #ifdef MFCNT
 897         if (!ioc->active)
 898                 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
 899                     "returning NULL!\n", ioc->name);
 900 #endif
 901
 902         /* If interrupts are not attached, do not return a request frame */
 903         if (!ioc->active)
 904                 return NULL;
 905
 906         spin_lock_irqsave(&ioc->FreeQlock, flags);
 907         if (!list_empty(&ioc->FreeQ)) {
 908                 int req_offset;
 909
 910                 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
 911                                 u.frame.linkage.list);
 912                 list_del(&mf->u.frame.linkage.list);
 913                 mf->u.frame.linkage.arg1 = 0;
 914                 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;  /* byte */
 915                 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
 916                                                                 /* u16! */
 917                 req_idx = req_offset / ioc->req_sz;
 918                 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
 919                 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
 920                 /* Default, will be changed if necessary in SG generation */
 921                 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
 922 #ifdef MFCNT
 923                 ioc->mfcnt++;
 924 #endif
 925         }
 926         else
 927                 mf = NULL;
 928         spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 929
 930 #ifdef MFCNT
 931         if (mf == NULL)
 932                 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
 933                     "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
 934                     ioc->req_depth);
 935         mfcounter++;
 936         if (mfcounter == PRINT_MF_COUNT)
 937                 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
 938                     ioc->mfcnt, ioc->req_depth);
 939 #endif
 940
 941         dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
 942             ioc->name, cb_idx, ioc->id, mf));
 943         return mf;
 944 }
 945
 946 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 947 /**
 948  *      mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
 949  *      @cb_idx: Handle of registered MPT protocol driver
 950  *      @ioc: Pointer to MPT adapter structure
 951  *      @mf: Pointer to MPT request frame
 952  *
 953  *      This routine posts an MPT request frame to the request post FIFO of a
 954  *      specific MPT adapter.
 955  */
 956 void
 957 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 958 {
 959         u32 mf_dma_addr;
 960         int req_offset;
 961         u16      req_idx;       /* Request index */
 962
 963         /* ensure values are reset properly! */
 964         mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;          /* byte */
 965         req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
 966                                                                 /* u16! */
 967         req_idx = req_offset / ioc->req_sz;
 968         mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
 969         mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
 970
 971         DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
 972
 973         mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
 974         dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
 975             "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
 976             ioc->RequestNB[req_idx]));
 977         CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
 978 }
 979
 980 /**
 981  *      mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
 982  *      @cb_idx: Handle of registered MPT protocol driver
 983  *      @ioc: Pointer to MPT adapter structure
 984  *      @mf: Pointer to MPT request frame
 985  *
 986  *      Send a protocol-specific MPT request frame to an IOC using
 987  *      hi-priority request queue.
 988  *
 989  *      This routine posts an MPT request frame to the request post FIFO of a
 990  *      specific MPT adapter.
 991  **/
 992 void
 993 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 994 {
 995         u32 mf_dma_addr;
 996         int req_offset;
 997         u16      req_idx;       /* Request index */
 998
 999         /* ensure values are reset properly! */
1000         mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1001         req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1002         req_idx = req_offset / ioc->req_sz;
1003         mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1004         mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1005
1006         DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1007
1008         mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1009         dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1010                 ioc->name, mf_dma_addr, req_idx));
1011         CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1012 }
1013
1014 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1015 /**
1016  *      mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1017  *      @ioc: Pointer to MPT adapter structure
1018  *      @mf: Pointer to MPT request frame
1019  *
1020  *      This routine places a MPT request frame back on the MPT adapter's
1021  *      FreeQ.
1022  */
1023 void
1024 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1025 {
1026         unsigned long flags;
1027
1028         /*  Put Request back on FreeQ!  */
1029         spin_lock_irqsave(&ioc->FreeQlock, flags);
1030         if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1031                 goto out;
1032         /* signature to know if this mf is freed */
1033         mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1034         list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1035 #ifdef MFCNT
1036         ioc->mfcnt--;
1037 #endif
1038  out:
1039         spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1040 }
1041
1042 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1043 /**
1044  *      mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1045  *      @pAddr: virtual address for SGE
1046  *      @flagslength: SGE flags and data transfer length
1047  *      @dma_addr: Physical address
1048  *
1049  *      This routine places a MPT request frame back on the MPT adapter's
1050  *      FreeQ.
1051  */
1052 static void
1053 mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1054 {
1055         SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1056         pSge->FlagsLength = cpu_to_le32(flagslength);
1057         pSge->Address = cpu_to_le32(dma_addr);
1058 }
1059
1060 /**
1061  *      mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1062  *      @pAddr: virtual address for SGE
1063  *      @flagslength: SGE flags and data transfer length
1064  *      @dma_addr: Physical address
1065  *
1066  *      This routine places a MPT request frame back on the MPT adapter's
1067  *      FreeQ.
1068  **/
1069 static void
1070 mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1071 {
1072         SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1073         pSge->Address.Low = cpu_to_le32
1074                         (lower_32_bits(dma_addr));
1075         pSge->Address.High = cpu_to_le32
1076                         (upper_32_bits(dma_addr));
1077         pSge->FlagsLength = cpu_to_le32
1078                         ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1079 }
1080
1081 /**
1082  *      mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1083  *      @pAddr: virtual address for SGE
1084  *      @flagslength: SGE flags and data transfer length
1085  *      @dma_addr: Physical address
1086  *
1087  *      This routine places a MPT request frame back on the MPT adapter's
1088  *      FreeQ.
1089  **/
1090 static void
1091 mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1092 {
1093         SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1094         u32 tmp;
1095
1096         pSge->Address.Low = cpu_to_le32
1097                         (lower_32_bits(dma_addr));
1098         tmp = (u32)(upper_32_bits(dma_addr));
1099
1100         /*
1101          * 1078 errata workaround for the 36GB limitation
1102          */
1103         if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32)  == 9) {
1104                 flagslength |=
1105                     MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1106                 tmp |= (1<<31);
1107                 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1108                         printk(KERN_DEBUG "1078 P0M2 addressing for "
1109                             "addr = 0x%llx len = %d\n",
1110                             (unsigned long long)dma_addr,
1111                             MPI_SGE_LENGTH(flagslength));
1112         }
1113
1114         pSge->Address.High = cpu_to_le32(tmp);
1115         pSge->FlagsLength = cpu_to_le32(
1116                 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1117 }
1118
1119 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1120 /**
1121  *      mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1122  *      @pAddr: virtual address for SGE
1123  *      @next: nextChainOffset value (u32's)
1124  *      @length: length of next SGL segment
1125  *      @dma_addr: Physical address
1126  *
1127  */
1128 static void
1129 mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1130 {
1131                 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1132                 pChain->Length = cpu_to_le16(length);
1133                 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1134                 pChain->NextChainOffset = next;
1135                 pChain->Address = cpu_to_le32(dma_addr);
1136 }
1137
1138 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1139 /**
1140  *      mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1141  *      @pAddr: virtual address for SGE
1142  *      @next: nextChainOffset value (u32's)
1143  *      @length: length of next SGL segment
1144  *      @dma_addr: Physical address
1145  *
1146  */
1147 static void
1148 mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1149 {
1150                 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1151                 u32 tmp = dma_addr & 0xFFFFFFFF;
1152
1153                 pChain->Length = cpu_to_le16(length);
1154                 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1155                                  MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1156
1157                 pChain->NextChainOffset = next;
1158
1159                 pChain->Address.Low = cpu_to_le32(tmp);
1160                 tmp = (u32)(upper_32_bits(dma_addr));
1161                 pChain->Address.High = cpu_to_le32(tmp);
1162 }
1163
1164 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1165 /**
1166  *      mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1167  *      @cb_idx: Handle of registered MPT protocol driver
1168  *      @ioc: Pointer to MPT adapter structure
1169  *      @reqBytes: Size of the request in bytes
1170  *      @req: Pointer to MPT request frame
1171  *      @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1172  *
1173  *      This routine is used exclusively to send MptScsiTaskMgmt
1174  *      requests since they are required to be sent via doorbell handshake.
1175  *
1176  *      NOTE: It is the callers responsibility to byte-swap fields in the
1177  *      request which are greater than 1 byte in size.
1178  *
1179  *      Returns 0 for success, non-zero for failure.
1180  */
1181 int
1182 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1183 {
1184         int     r = 0;
1185         u8      *req_as_bytes;
1186         int      ii;
1187
1188         /* State is known to be good upon entering
1189          * this function so issue the bus reset
1190          * request.
1191          */
1192
1193         /*
1194          * Emulate what mpt_put_msg_frame() does /wrt to sanity
1195          * setting cb_idx/req_idx.  But ONLY if this request
1196          * is in proper (pre-alloc'd) request buffer range...
1197          */
1198         ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1199         if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1200                 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1201                 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1202                 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1203         }
1204
1205         /* Make sure there are no doorbells */
1206         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1207
1208         CHIPREG_WRITE32(&ioc->chip->Doorbell,
1209                         ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1210                          ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1211
1212         /* Wait for IOC doorbell int */
1213         if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1214                 return ii;
1215         }
1216
1217         /* Read doorbell and check for active bit */
1218         if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1219                 return -5;
1220
1221         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1222                 ioc->name, ii));
1223
1224         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1225
1226         if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1227                 return -2;
1228         }
1229
1230         /* Send request via doorbell handshake */
1231         req_as_bytes = (u8 *) req;
1232         for (ii = 0; ii < reqBytes/4; ii++) {
1233                 u32 word;
1234
1235                 word = ((req_as_bytes[(ii*4) + 0] <<  0) |
1236                         (req_as_bytes[(ii*4) + 1] <<  8) |
1237                         (req_as_bytes[(ii*4) + 2] << 16) |
1238                         (req_as_bytes[(ii*4) + 3] << 24));
1239                 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1240                 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1241                         r = -3;
1242                         break;
1243                 }
1244         }
1245
1246         if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1247                 r = 0;
1248         else
1249                 r = -4;
1250
1251         /* Make sure there are no doorbells */
1252         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1253
1254         return r;
1255 }
1256
1257 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1258 /**
1259  * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1260  * @ioc: Pointer to MPT adapter structure
1261  * @access_control_value: define bits below
1262  * @sleepFlag: Specifies whether the process can sleep
1263  *
1264  * Provides mechanism for the host driver to control the IOC's
1265  * Host Page Buffer access.
1266  *
1267  * Access Control Value - bits[15:12]
1268  * 0h Reserved
1269  * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1270  * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1271  * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1272  *
1273  * Returns 0 for success, non-zero for failure.
1274  */
1275
1276 static int
1277 mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1278 {
1279         int      r = 0;
1280
1281         /* return if in use */
1282         if (CHIPREG_READ32(&ioc->chip->Doorbell)
1283             & MPI_DOORBELL_ACTIVE)
1284             return -1;
1285
1286         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1287
1288         CHIPREG_WRITE32(&ioc->chip->Doorbell,
1289                 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1290                  <<MPI_DOORBELL_FUNCTION_SHIFT) |
1291                  (access_control_value<<12)));
1292
1293         /* Wait for IOC to clear Doorbell Status bit */
1294         if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1295                 return -2;
1296         }else
1297                 return 0;
1298 }
1299
1300 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1301 /**
1302  *      mpt_host_page_alloc - allocate system memory for the fw
1303  *      @ioc: Pointer to pointer to IOC adapter
1304  *      @ioc_init: Pointer to ioc init config page
1305  *
1306  *      If we already allocated memory in past, then resend the same pointer.
1307  *      Returns 0 for success, non-zero for failure.
1308  */
1309 static int
1310 mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1311 {
1312         char    *psge;
1313         int     flags_length;
1314         u32     host_page_buffer_sz=0;
1315
1316         if(!ioc->HostPageBuffer) {
1317
1318                 host_page_buffer_sz =
1319                     le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1320
1321                 if(!host_page_buffer_sz)
1322                         return 0; /* fw doesn't need any host buffers */
1323
1324                 /* spin till we get enough memory */
1325                 while(host_page_buffer_sz > 0) {
1326
1327                         if((ioc->HostPageBuffer = pci_alloc_consistent(
1328                             ioc->pcidev,
1329                             host_page_buffer_sz,
1330                             &ioc->HostPageBuffer_dma)) != NULL) {
1331
1332                                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1333                                     "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1334                                     ioc->name, ioc->HostPageBuffer,
1335                                     (u32)ioc->HostPageBuffer_dma,
1336                                     host_page_buffer_sz));
1337                                 ioc->alloc_total += host_page_buffer_sz;
1338                                 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1339                                 break;
1340                         }
1341
1342                         host_page_buffer_sz -= (4*1024);
1343                 }
1344         }
1345
1346         if(!ioc->HostPageBuffer) {
1347                 printk(MYIOC_s_ERR_FMT
1348                     "Failed to alloc memory for host_page_buffer!\n",
1349                     ioc->name);
1350                 return -999;
1351         }
1352
1353         psge = (char *)&ioc_init->HostPageBufferSGE;
1354         flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1355             MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1356             MPI_SGE_FLAGS_HOST_TO_IOC |
1357             MPI_SGE_FLAGS_END_OF_BUFFER;
1358         flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1359         flags_length |= ioc->HostPageBuffer_sz;
1360         ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1361         ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1362
1363 return 0;
1364 }
1365
1366 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1367 /**
1368  *      mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1369  *      @iocid: IOC unique identifier (integer)
1370  *      @iocpp: Pointer to pointer to IOC adapter
1371  *
1372  *      Given a unique IOC identifier, set pointer to the associated MPT
1373  *      adapter structure.
1374  *
1375  *      Returns iocid and sets iocpp if iocid is found.
1376  *      Returns -1 if iocid is not found.
1377  */
1378 int
1379 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1380 {
1381         MPT_ADAPTER *ioc;
1382
1383         list_for_each_entry(ioc,&ioc_list,list) {
1384                 if (ioc->id == iocid) {
1385                         *iocpp =ioc;
1386                         return iocid;
1387                 }
1388         }
1389
1390         *iocpp = NULL;
1391         return -1;
1392 }
1393
1394 /**
1395  *      mpt_get_product_name - returns product string
1396  *      @vendor: pci vendor id
1397  *      @device: pci device id
1398  *      @revision: pci revision id
1399  *
1400  *      Returns product string displayed when driver loads,
1401  *      in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1402  *
1403  **/
1404 static const char*
1405 mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1406 {
1407         char *product_str = NULL;
1408
1409         if (vendor == PCI_VENDOR_ID_BROCADE) {
1410                 switch (device)
1411                 {
1412                 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1413                         switch (revision)
1414                         {
1415                         case 0x00:
1416                                 product_str = "BRE040 A0";
1417                                 break;
1418                         case 0x01:
1419                                 product_str = "BRE040 A1";
1420                                 break;
1421                         default:
1422                                 product_str = "BRE040";
1423                                 break;
1424                         }
1425                         break;
1426                 }
1427                 goto out;
1428         }
1429
1430         switch (device)
1431         {
1432         case MPI_MANUFACTPAGE_DEVICEID_FC909:
1433                 product_str = "LSIFC909 B1";
1434                 break;
1435         case MPI_MANUFACTPAGE_DEVICEID_FC919:
1436                 product_str = "LSIFC919 B0";
1437                 break;
1438         case MPI_MANUFACTPAGE_DEVICEID_FC929:
1439                 product_str = "LSIFC929 B0";
1440                 break;
1441         case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1442                 if (revision < 0x80)
1443                         product_str = "LSIFC919X A0";
1444                 else
1445                         product_str = "LSIFC919XL A1";
1446                 break;
1447         case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1448                 if (revision < 0x80)
1449                         product_str = "LSIFC929X A0";
1450                 else
1451                         product_str = "LSIFC929XL A1";
1452                 break;
1453         case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1454                 product_str = "LSIFC939X A1";
1455                 break;
1456         case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1457                 product_str = "LSIFC949X A1";
1458                 break;
1459         case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1460                 switch (revision)
1461                 {
1462                 case 0x00:
1463                         product_str = "LSIFC949E A0";
1464                         break;
1465                 case 0x01:
1466                         product_str = "LSIFC949E A1";
1467                         break;
1468                 default:
1469                         product_str = "LSIFC949E";
1470                         break;
1471                 }
1472                 break;
1473         case MPI_MANUFACTPAGE_DEVID_53C1030:
1474                 switch (revision)
1475                 {
1476                 case 0x00:
1477                         product_str = "LSI53C1030 A0";
1478                         break;
1479                 case 0x01:
1480                         product_str = "LSI53C1030 B0";
1481                         break;
1482                 case 0x03:
1483                         product_str = "LSI53C1030 B1";
1484                         break;
1485                 case 0x07:
1486                         product_str = "LSI53C1030 B2";
1487                         break;
1488                 case 0x08:
1489                         product_str = "LSI53C1030 C0";
1490                         break;
1491                 case 0x80:
1492                         product_str = "LSI53C1030T A0";
1493                         break;
1494                 case 0x83:
1495                         product_str = "LSI53C1030T A2";
1496                         break;
1497                 case 0x87:
1498                         product_str = "LSI53C1030T A3";
1499                         break;
1500                 case 0xc1:
1501                         product_str = "LSI53C1020A A1";
1502                         break;
1503                 default:
1504                         product_str = "LSI53C1030";
1505                         break;
1506                 }
1507                 break;
1508         case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1509                 switch (revision)
1510                 {
1511                 case 0x03:
1512                         product_str = "LSI53C1035 A2";
1513                         break;
1514                 case 0x04:
1515                         product_str = "LSI53C1035 B0";
1516                         break;
1517                 default:
1518                         product_str = "LSI53C1035";
1519                         break;
1520                 }
1521                 break;
1522         case MPI_MANUFACTPAGE_DEVID_SAS1064:
1523                 switch (revision)
1524                 {
1525                 case 0x00:
1526                         product_str = "LSISAS1064 A1";
1527                         break;
1528                 case 0x01:
1529                         product_str = "LSISAS1064 A2";
1530                         break;
1531                 case 0x02:
1532                         product_str = "LSISAS1064 A3";
1533                         break;
1534                 case 0x03:
1535                         product_str = "LSISAS1064 A4";
1536                         break;
1537                 default:
1538                         product_str = "LSISAS1064";
1539                         break;
1540                 }
1541                 break;
1542         case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1543                 switch (revision)
1544                 {
1545                 case 0x00:
1546                         product_str = "LSISAS1064E A0";
1547                         break;
1548                 case 0x01:
1549                         product_str = "LSISAS1064E B0";
1550                         break;
1551                 case 0x02:
1552                         product_str = "LSISAS1064E B1";
1553                         break;
1554                 case 0x04:
1555                         product_str = "LSISAS1064E B2";
1556                         break;
1557                 case 0x08:
1558                         product_str = "LSISAS1064E B3";
1559                         break;
1560                 default:
1561                         product_str = "LSISAS1064E";
1562                         break;
1563                 }
1564                 break;
1565         case MPI_MANUFACTPAGE_DEVID_SAS1068:
1566                 switch (revision)
1567                 {
1568                 case 0x00:
1569                         product_str = "LSISAS1068 A0";
1570                         break;
1571                 case 0x01:
1572                         product_str = "LSISAS1068 B0";
1573                         break;
1574                 case 0x02:
1575                         product_str = "LSISAS1068 B1";
1576                         break;
1577                 default:
1578                         product_str = "LSISAS1068";
1579                         break;
1580                 }
1581                 break;
1582         case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1583                 switch (revision)
1584                 {
1585                 case 0x00:
1586                         product_str = "LSISAS1068E A0";
1587                         break;
1588                 case 0x01:
1589                         product_str = "LSISAS1068E B0";
1590                         break;
1591                 case 0x02:
1592                         product_str = "LSISAS1068E B1";
1593                         break;
1594                 case 0x04:
1595                         product_str = "LSISAS1068E B2";
1596                         break;
1597                 case 0x08:
1598                         product_str = "LSISAS1068E B3";
1599                         break;
1600                 default:
1601                         product_str = "LSISAS1068E";
1602                         break;
1603                 }
1604                 break;
1605         case MPI_MANUFACTPAGE_DEVID_SAS1078:
1606                 switch (revision)
1607                 {
1608                 case 0x00:
1609                         product_str = "LSISAS1078 A0";
1610                         break;
1611                 case 0x01:
1612                         product_str = "LSISAS1078 B0";
1613                         break;
1614                 case 0x02:
1615                         product_str = "LSISAS1078 C0";
1616                         break;
1617                 case 0x03:
1618                         product_str = "LSISAS1078 C1";
1619                         break;
1620                 case 0x04:
1621                         product_str = "LSISAS1078 C2";
1622                         break;
1623                 default:
1624                         product_str = "LSISAS1078";
1625                         break;
1626                 }
1627                 break;
1628         }
1629
1630  out:
1631         return product_str;
1632 }
1633
1634 /**
1635  *      mpt_mapresources - map in memory mapped io
1636  *      @ioc: Pointer to pointer to IOC adapter
1637  *
1638  **/
1639 static int
1640 mpt_mapresources(MPT_ADAPTER *ioc)
1641 {
1642         u8              __iomem *mem;
1643         int              ii;
1644         resource_size_t  mem_phys;
1645         unsigned long    port;
1646         u32              msize;
1647         u32              psize;
1648         int              r = -ENODEV;
1649         struct pci_dev *pdev;
1650
1651         pdev = ioc->pcidev;
1652         ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1653         if (pci_enable_device_mem(pdev)) {
1654                 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1655                     "failed\n", ioc->name);
1656                 return r;
1657         }
1658         if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1659                 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1660                     "MEM failed\n", ioc->name);
1661                 goto out_pci_disable_device;
1662         }
1663
1664         if (sizeof(dma_addr_t) > 4) {
1665                 const uint64_t required_mask = dma_get_required_mask
1666                     (&pdev->dev);
1667                 if (required_mask > DMA_BIT_MASK(32)
1668                         && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1669                         && !pci_set_consistent_dma_mask(pdev,
1670                                                  DMA_BIT_MASK(64))) {
1671                         ioc->dma_mask = DMA_BIT_MASK(64);
1672                         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1673                                 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1674                                 ioc->name));
1675                 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1676                         && !pci_set_consistent_dma_mask(pdev,
1677                                                 DMA_BIT_MASK(32))) {
1678                         ioc->dma_mask = DMA_BIT_MASK(32);
1679                         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1680                                 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1681                                 ioc->name));
1682                 } else {
1683                         printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1684                             ioc->name, pci_name(pdev));
1685                         goto out_pci_release_region;
1686                 }
1687         } else {
1688                 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1689                         && !pci_set_consistent_dma_mask(pdev,
1690                                                 DMA_BIT_MASK(32))) {
1691                         ioc->dma_mask = DMA_BIT_MASK(32);
1692                         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1693                                 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1694                                 ioc->name));
1695                 } else {
1696                         printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1697                             ioc->name, pci_name(pdev));
1698                         goto out_pci_release_region;
1699                 }
1700         }
1701
1702         mem_phys = msize = 0;
1703         port = psize = 0;
1704         for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1705                 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1706                         if (psize)
1707                                 continue;
1708                         /* Get I/O space! */
1709                         port = pci_resource_start(pdev, ii);
1710                         psize = pci_resource_len(pdev, ii);
1711                 } else {
1712                         if (msize)
1713                                 continue;
1714                         /* Get memmap */
1715                         mem_phys = pci_resource_start(pdev, ii);
1716                         msize = pci_resource_len(pdev, ii);
1717                 }
1718         }
1719         ioc->mem_size = msize;
1720
1721         mem = NULL;
1722         /* Get logical ptr for PciMem0 space */
1723         /*mem = ioremap(mem_phys, msize);*/
1724         mem = ioremap(mem_phys, msize);
1725         if (mem == NULL) {
1726                 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1727                         " memory!\n", ioc->name);
1728                 r = -EINVAL;
1729                 goto out_pci_release_region;
1730         }
1731         ioc->memmap = mem;
1732         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1733             ioc->name, mem, (unsigned long long)mem_phys));
1734
1735         ioc->mem_phys = mem_phys;
1736         ioc->chip = (SYSIF_REGS __iomem *)mem;
1737
1738         /* Save Port IO values in case we need to do downloadboot */
1739         ioc->pio_mem_phys = port;
1740         ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1741
1742         return 0;
1743
1744 out_pci_release_region:
1745         pci_release_selected_regions(pdev, ioc->bars);
1746 out_pci_disable_device:
1747         pci_disable_device(pdev);
1748         return r;
1749 }
1750
1751 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1752 /**
1753  *      mpt_attach - Install a PCI intelligent MPT adapter.
1754  *      @pdev: Pointer to pci_dev structure
1755  *      @id: PCI device ID information
1756  *
1757  *      This routine performs all the steps necessary to bring the IOC of
1758  *      a MPT adapter to a OPERATIONAL state.  This includes registering
1759  *      memory regions, registering the interrupt, and allocating request
1760  *      and reply memory pools.
1761  *
1762  *      This routine also pre-fetches the LAN MAC address of a Fibre Channel
1763  *      MPT adapter.
1764  *
1765  *      Returns 0 for success, non-zero for failure.
1766  *
1767  *      TODO: Add support for polled controllers
1768  */
1769 int
1770 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1771 {
1772         MPT_ADAPTER     *ioc;
1773         u8               cb_idx;
1774         int              r = -ENODEV;
1775         u8               pcixcmd;
1776         static int       mpt_ids = 0;
1777 #ifdef CONFIG_PROC_FS
1778         struct proc_dir_entry *dent;
1779 #endif
1780
1781         ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
1782         if (ioc == NULL) {
1783                 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1784                 return -ENOMEM;
1785         }
1786
1787         ioc->id = mpt_ids++;
1788         sprintf(ioc->name, "ioc%d", ioc->id);
1789         dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1790
1791         /*
1792          * set initial debug level
1793          * (refer to mptdebug.h)
1794          *
1795          */
1796         ioc->debug_level = mpt_debug_level;
1797         if (mpt_debug_level)
1798                 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1799
1800         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1801
1802         ioc->pcidev = pdev;
1803         if (mpt_mapresources(ioc)) {
1804                 goto out_free_ioc;
1805         }
1806
1807         /*
1808          * Setting up proper handlers for scatter gather handling
1809          */
1810         if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1811                 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1812                         ioc->add_sge = &mpt_add_sge_64bit_1078;
1813                 else
1814                         ioc->add_sge = &mpt_add_sge_64bit;
1815                 ioc->add_chain = &mpt_add_chain_64bit;
1816                 ioc->sg_addr_size = 8;
1817         } else {
1818                 ioc->add_sge = &mpt_add_sge;
1819                 ioc->add_chain = &mpt_add_chain;
1820                 ioc->sg_addr_size = 4;
1821         }
1822         ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1823
1824         ioc->alloc_total = sizeof(MPT_ADAPTER);
1825         ioc->req_sz = MPT_DEFAULT_FRAME_SIZE;           /* avoid div by zero! */
1826         ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1827
1828
1829         spin_lock_init(&ioc->taskmgmt_lock);
1830         mutex_init(&ioc->internal_cmds.mutex);
1831         init_completion(&ioc->internal_cmds.done);
1832         mutex_init(&ioc->mptbase_cmds.mutex);
1833         init_completion(&ioc->mptbase_cmds.done);
1834         mutex_init(&ioc->taskmgmt_cmds.mutex);
1835         init_completion(&ioc->taskmgmt_cmds.done);
1836
1837         /* Initialize the event logging.
1838          */
1839         ioc->eventTypes = 0;    /* None */
1840         ioc->eventContext = 0;
1841         ioc->eventLogSize = 0;
1842         ioc->events = NULL;
1843
1844 #ifdef MFCNT
1845         ioc->mfcnt = 0;
1846 #endif
1847
1848         ioc->sh = NULL;
1849         ioc->cached_fw = NULL;
1850
1851         /* Initialize SCSI Config Data structure
1852          */
1853         memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1854
1855         /* Initialize the fc rport list head.
1856          */
1857         INIT_LIST_HEAD(&ioc->fc_rports);
1858
1859         /* Find lookup slot. */
1860         INIT_LIST_HEAD(&ioc->list);
1861
1862
1863         /* Initialize workqueue */
1864         INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1865
1866         snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1867                  "mpt_poll_%d", ioc->id);
1868         ioc->reset_work_q = alloc_workqueue(ioc->reset_work_q_name,
1869                                             WQ_MEM_RECLAIM, 0);
1870         if (!ioc->reset_work_q) {
1871                 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1872                     ioc->name);
1873                 r = -ENOMEM;
1874                 goto out_unmap_resources;
1875         }
1876
1877         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1878             ioc->name, &ioc->facts, &ioc->pfacts[0]));
1879
1880         ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1881                                               pdev->revision);
1882
1883         switch (pdev->device)
1884         {
1885         case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1886         case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1887                 ioc->errata_flag_1064 = 1;
1888         case MPI_MANUFACTPAGE_DEVICEID_FC909:
1889         case MPI_MANUFACTPAGE_DEVICEID_FC929:
1890         case MPI_MANUFACTPAGE_DEVICEID_FC919:
1891         case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1892                 ioc->bus_type = FC;
1893                 break;
1894
1895         case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1896                 if (pdev->revision < XL_929) {
1897                         /* 929X Chip Fix. Set Split transactions level
1898                         * for PCIX. Set MOST bits to zero.
1899                         */
1900                         pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1901                         pcixcmd &= 0x8F;
1902                         pci_write_config_byte(pdev, 0x6a, pcixcmd);
1903                 } else {
1904                         /* 929XL Chip Fix. Set MMRBC to 0x08.
1905                         */
1906                         pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1907                         pcixcmd |= 0x08;
1908                         pci_write_config_byte(pdev, 0x6a, pcixcmd);
1909                 }
1910                 ioc->bus_type = FC;
1911                 break;
1912
1913         case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1914                 /* 919X Chip Fix. Set Split transactions level
1915                  * for PCIX. Set MOST bits to zero.
1916                  */
1917                 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1918                 pcixcmd &= 0x8F;
1919                 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1920                 ioc->bus_type = FC;
1921                 break;
1922
1923         case MPI_MANUFACTPAGE_DEVID_53C1030:
1924                 /* 1030 Chip Fix. Disable Split transactions
1925                  * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1926                  */
1927                 if (pdev->revision < C0_1030) {
1928                         pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1929                         pcixcmd &= 0x8F;
1930                         pci_write_config_byte(pdev, 0x6a, pcixcmd);
1931                 }
1932
1933         case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1934                 ioc->bus_type = SPI;
1935                 break;
1936
1937         case MPI_MANUFACTPAGE_DEVID_SAS1064:
1938         case MPI_MANUFACTPAGE_DEVID_SAS1068:
1939                 ioc->errata_flag_1064 = 1;
1940                 ioc->bus_type = SAS;
1941                 break;
1942
1943         case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1944         case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1945         case MPI_MANUFACTPAGE_DEVID_SAS1078:
1946                 ioc->bus_type = SAS;
1947                 break;
1948         }
1949
1950
1951         switch (ioc->bus_type) {
1952
1953         case SAS:
1954                 ioc->msi_enable = mpt_msi_enable_sas;
1955                 break;
1956
1957         case SPI:
1958                 ioc->msi_enable = mpt_msi_enable_spi;
1959                 break;
1960
1961         case FC:
1962                 ioc->msi_enable = mpt_msi_enable_fc;
1963                 break;
1964
1965         default:
1966                 ioc->msi_enable = 0;
1967                 break;
1968         }
1969
1970         ioc->fw_events_off = 1;
1971
1972         if (ioc->errata_flag_1064)
1973                 pci_disable_io_access(pdev);
1974
1975         spin_lock_init(&ioc->FreeQlock);
1976
1977         /* Disable all! */
1978         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1979         ioc->active = 0;
1980         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1981
1982         /* Set IOC ptr in the pcidev's driver data. */
1983         pci_set_drvdata(ioc->pcidev, ioc);
1984
1985         /* Set lookup ptr. */
1986         list_add_tail(&ioc->list, &ioc_list);
1987
1988         /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1989          */
1990         mpt_detect_bound_ports(ioc, pdev);
1991
1992         INIT_LIST_HEAD(&ioc->fw_event_list);
1993         spin_lock_init(&ioc->fw_event_lock);
1994         snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
1995         ioc->fw_event_q = alloc_workqueue(ioc->fw_event_q_name,
1996                                           WQ_MEM_RECLAIM, 0);
1997         if (!ioc->fw_event_q) {
1998                 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1999                     ioc->name);
2000                 r = -ENOMEM;
2001                 goto out_remove_ioc;
2002         }
2003
2004         if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2005             CAN_SLEEP)) != 0){
2006                 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2007                     ioc->name, r);
2008
2009                 destroy_workqueue(ioc->fw_event_q);
2010                 ioc->fw_event_q = NULL;
2011
2012                 list_del(&ioc->list);
2013                 if (ioc->alt_ioc)
2014                         ioc->alt_ioc->alt_ioc = NULL;
2015                 iounmap(ioc->memmap);
2016                 if (pci_is_enabled(pdev))
2017                         pci_disable_device(pdev);
2018                 if (r != -5)
2019                         pci_release_selected_regions(pdev, ioc->bars);
2020
2021                 destroy_workqueue(ioc->reset_work_q);
2022                 ioc->reset_work_q = NULL;
2023
2024                 kfree(ioc);
2025                 return r;
2026         }
2027
2028         /* call per device driver probe entry point */
2029         for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2030                 if(MptDeviceDriverHandlers[cb_idx] &&
2031                   MptDeviceDriverHandlers[cb_idx]->probe) {
2032                         MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2033                 }
2034         }
2035
2036 #ifdef CONFIG_PROC_FS
2037         /*
2038          *  Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2039          */
2040         dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2041         if (dent) {
2042                 proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
2043                 proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
2044         }
2045 #endif
2046
2047         if (!ioc->alt_ioc)
2048                 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2049                         msecs_to_jiffies(MPT_POLLING_INTERVAL));
2050
2051         return 0;
2052
2053 out_remove_ioc:
2054         list_del(&ioc->list);
2055         if (ioc->alt_ioc)
2056                 ioc->alt_ioc->alt_ioc = NULL;
2057
2058         destroy_workqueue(ioc->reset_work_q);
2059         ioc->reset_work_q = NULL;
2060
2061 out_unmap_resources:
2062         iounmap(ioc->memmap);
2063         pci_disable_device(pdev);
2064         pci_release_selected_regions(pdev, ioc->bars);
2065
2066 out_free_ioc:
2067         kfree(ioc);
2068
2069         return r;
2070 }
2071
2072 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2073 /**
2074  *      mpt_detach - Remove a PCI intelligent MPT adapter.
2075  *      @pdev: Pointer to pci_dev structure
2076  */
2077
2078 void
2079 mpt_detach(struct pci_dev *pdev)
2080 {
2081         MPT_ADAPTER     *ioc = pci_get_drvdata(pdev);
2082         char pname[64];
2083         u8 cb_idx;
2084         unsigned long flags;
2085         struct workqueue_struct *wq;
2086
2087         /*
2088          * Stop polling ioc for fault condition
2089          */
2090         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2091         wq = ioc->reset_work_q;
2092         ioc->reset_work_q = NULL;
2093         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2094         cancel_delayed_work(&ioc->fault_reset_work);
2095         destroy_workqueue(wq);
2096
2097         spin_lock_irqsave(&ioc->fw_event_lock, flags);
2098         wq = ioc->fw_event_q;
2099         ioc->fw_event_q = NULL;
2100         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2101         destroy_workqueue(wq);
2102
2103         snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2104         remove_proc_entry(pname, NULL);
2105         snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2106         remove_proc_entry(pname, NULL);
2107         snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2108         remove_proc_entry(pname, NULL);
2109
2110         /* call per device driver remove entry point */
2111         for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2112                 if(MptDeviceDriverHandlers[cb_idx] &&
2113                   MptDeviceDriverHandlers[cb_idx]->remove) {
2114                         MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2115                 }
2116         }
2117
2118         /* Disable interrupts! */
2119         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2120
2121         ioc->active = 0;
2122         synchronize_irq(pdev->irq);
2123
2124         /* Clear any lingering interrupt */
2125         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2126
2127         CHIPREG_READ32(&ioc->chip->IntStatus);
2128
2129         mpt_adapter_dispose(ioc);
2130
2131 }
2132
2133 /**************************************************************************
2134  * Power Management
2135  */
2136 #ifdef CONFIG_PM
2137 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2138 /**
2139  *      mpt_suspend - Fusion MPT base driver suspend routine.
2140  *      @pdev: Pointer to pci_dev structure
2141  *      @state: new state to enter
2142  */
2143 int
2144 mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2145 {
2146         u32 device_state;
2147         MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2148
2149         device_state = pci_choose_state(pdev, state);
2150         printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2151             "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2152             device_state);
2153
2154         /* put ioc into READY_STATE */
2155         if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2156                 printk(MYIOC_s_ERR_FMT
2157                 "pci-suspend:  IOC msg unit reset failed!\n", ioc->name);
2158         }
2159
2160         /* disable interrupts */
2161         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2162         ioc->active = 0;
2163
2164         /* Clear any lingering interrupt */
2165         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2166
2167         free_irq(ioc->pci_irq, ioc);
2168         if (ioc->msi_enable)
2169                 pci_disable_msi(ioc->pcidev);
2170         ioc->pci_irq = -1;
2171         pci_save_state(pdev);
2172         pci_disable_device(pdev);
2173         pci_release_selected_regions(pdev, ioc->bars);
2174         pci_set_power_state(pdev, device_state);
2175         return 0;
2176 }
2177
2178 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2179 /**
2180  *      mpt_resume - Fusion MPT base driver resume routine.
2181  *      @pdev: Pointer to pci_dev structure
2182  */
2183 int
2184 mpt_resume(struct pci_dev *pdev)
2185 {
2186         MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2187         u32 device_state = pdev->current_state;
2188         int recovery_state;
2189         int err;
2190
2191         printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2192             "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2193             device_state);
2194
2195         pci_set_power_state(pdev, PCI_D0);
2196         pci_enable_wake(pdev, PCI_D0, 0);
2197         pci_restore_state(pdev);
2198         ioc->pcidev = pdev;
2199         err = mpt_mapresources(ioc);
2200         if (err)
2201                 return err;
2202
2203         if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2204                 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2205                         ioc->add_sge = &mpt_add_sge_64bit_1078;
2206                 else
2207                         ioc->add_sge = &mpt_add_sge_64bit;
2208                 ioc->add_chain = &mpt_add_chain_64bit;
2209                 ioc->sg_addr_size = 8;
2210         } else {
2211
2212                 ioc->add_sge = &mpt_add_sge;
2213                 ioc->add_chain = &mpt_add_chain;
2214                 ioc->sg_addr_size = 4;
2215         }
2216         ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2217
2218         printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2219             ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2220             CHIPREG_READ32(&ioc->chip->Doorbell));
2221
2222         /*
2223          * Errata workaround for SAS pci express:
2224          * Upon returning to the D0 state, the contents of the doorbell will be
2225          * stale data, and this will incorrectly signal to the host driver that
2226          * the firmware is ready to process mpt commands.   The workaround is
2227          * to issue a diagnostic reset.
2228          */
2229         if (ioc->bus_type == SAS && (pdev->device ==
2230             MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2231             MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2232                 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2233                         printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2234                             ioc->name);
2235                         goto out;
2236                 }
2237         }
2238
2239         /* bring ioc to operational state */
2240         printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2241         recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2242                                                  CAN_SLEEP);
2243         if (recovery_state != 0)
2244                 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2245                     "error:[%x]\n", ioc->name, recovery_state);
2246         else
2247                 printk(MYIOC_s_INFO_FMT
2248                     "pci-resume: success\n", ioc->name);
2249  out:
2250         return 0;
2251
2252 }
2253 #endif
2254
2255 static int
2256 mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2257 {
2258         if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2259              ioc->bus_type != SPI) ||
2260             (MptDriverClass[index] == MPTFC_DRIVER &&
2261              ioc->bus_type != FC) ||
2262             (MptDriverClass[index] == MPTSAS_DRIVER &&
2263              ioc->bus_type != SAS))
2264                 /* make sure we only call the relevant reset handler
2265                  * for the bus */
2266                 return 0;
2267         return (MptResetHandlers[index])(ioc, reset_phase);
2268 }
2269
2270 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2271 /**
2272  *      mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2273  *      @ioc: Pointer to MPT adapter structure
2274  *      @reason: Event word / reason
2275  *      @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2276  *
2277  *      This routine performs all the steps necessary to bring the IOC
2278  *      to a OPERATIONAL state.
2279  *
2280  *      This routine also pre-fetches the LAN MAC address of a Fibre Channel
2281  *      MPT adapter.
2282  *
2283  *      Returns:
2284  *               0 for success
2285  *              -1 if failed to get board READY
2286  *              -2 if READY but IOCFacts Failed
2287  *              -3 if READY but PrimeIOCFifos Failed
2288  *              -4 if READY but IOCInit Failed
2289  *              -5 if failed to enable_device and/or request_selected_regions
2290  *              -6 if failed to upload firmware
2291  */
2292 static int
2293 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2294 {
2295         int      hard_reset_done = 0;
2296         int      alt_ioc_ready = 0;
2297         int      hard;
2298         int      rc=0;
2299         int      ii;
2300         int      ret = 0;
2301         int      reset_alt_ioc_active = 0;
2302         int      irq_allocated = 0;
2303         u8      *a;
2304
2305         printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2306             reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2307
2308         /* Disable reply interrupts (also blocks FreeQ) */
2309         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2310         ioc->active = 0;
2311
2312         if (ioc->alt_ioc) {
2313                 if (ioc->alt_ioc->active ||
2314                     reason == MPT_HOSTEVENT_IOC_RECOVER) {
2315                         reset_alt_ioc_active = 1;
2316                         /* Disable alt-IOC's reply interrupts
2317                          *  (and FreeQ) for a bit
2318                          **/
2319                         CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2320                                 0xFFFFFFFF);
2321                         ioc->alt_ioc->active = 0;
2322                 }
2323         }
2324
2325         hard = 1;
2326         if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2327                 hard = 0;
2328
2329         if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2330                 if (hard_reset_done == -4) {
2331                         printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2332                             ioc->name);
2333
2334                         if (reset_alt_ioc_active && ioc->alt_ioc) {
2335                                 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2336                                 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2337                                     "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2338                                 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2339                                 ioc->alt_ioc->active = 1;
2340                         }
2341
2342                 } else {
2343                         printk(MYIOC_s_WARN_FMT
2344                             "NOT READY WARNING!\n", ioc->name);
2345                 }
2346                 ret = -1;
2347                 goto out;
2348         }
2349
2350         /* hard_reset_done = 0 if a soft reset was performed
2351          * and 1 if a hard reset was performed.
2352          */
2353         if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2354                 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2355                         alt_ioc_ready = 1;
2356                 else
2357                         printk(MYIOC_s_WARN_FMT
2358                             ": alt-ioc Not ready WARNING!\n",
2359                             ioc->alt_ioc->name);
2360         }
2361
2362         for (ii=0; ii<5; ii++) {
2363                 /* Get IOC facts! Allow 5 retries */
2364                 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2365                         break;
2366         }
2367
2368
2369         if (ii == 5) {
2370                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2371                     "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2372                 ret = -2;
2373         } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2374                 MptDisplayIocCapabilities(ioc);
2375         }
2376
2377         if (alt_ioc_ready) {
2378                 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2379                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2380                             "Initial Alt IocFacts failed rc=%x\n",
2381                             ioc->name, rc));
2382                         /* Retry - alt IOC was initialized once
2383                          */
2384                         rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2385                 }
2386                 if (rc) {
2387                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2388                             "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2389                         alt_ioc_ready = 0;
2390                         reset_alt_ioc_active = 0;
2391                 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2392                         MptDisplayIocCapabilities(ioc->alt_ioc);
2393                 }
2394         }
2395
2396         if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2397             (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2398                 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2399                 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2400                     IORESOURCE_IO);
2401                 if (pci_enable_device(ioc->pcidev))
2402                         return -5;
2403                 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2404                         "mpt"))
2405                         return -5;
2406         }
2407
2408         /*
2409          * Device is reset now. It must have de-asserted the interrupt line
2410          * (if it was asserted) and it should be safe to register for the
2411          * interrupt now.
2412          */
2413         if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2414                 ioc->pci_irq = -1;
2415                 if (ioc->pcidev->irq) {
2416                         if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2417                                 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2418                                     ioc->name);
2419                         else
2420                                 ioc->msi_enable = 0;
2421                         rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2422                             IRQF_SHARED, ioc->name, ioc);
2423                         if (rc < 0) {
2424                                 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2425                                     "interrupt %d!\n",
2426                                     ioc->name, ioc->pcidev->irq);
2427                                 if (ioc->msi_enable)
2428                                         pci_disable_msi(ioc->pcidev);
2429                                 ret = -EBUSY;
2430                                 goto out;
2431                         }
2432                         irq_allocated = 1;
2433                         ioc->pci_irq = ioc->pcidev->irq;
2434                         pci_set_master(ioc->pcidev);            /* ?? */
2435                         pci_set_drvdata(ioc->pcidev, ioc);
2436                         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2437                             "installed at interrupt %d\n", ioc->name,
2438                             ioc->pcidev->irq));
2439                 }
2440         }
2441
2442         /* Prime reply & request queues!
2443          * (mucho alloc's) Must be done prior to
2444          * init as upper addresses are needed for init.
2445          * If fails, continue with alt-ioc processing
2446          */
2447         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2448             ioc->name));
2449         if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2450                 ret = -3;
2451
2452         /* May need to check/upload firmware & data here!
2453          * If fails, continue with alt-ioc processing
2454          */
2455         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2456             ioc->name));
2457         if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2458                 ret = -4;
2459 // NEW!
2460         if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2461                 printk(MYIOC_s_WARN_FMT
2462                     ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2463                     ioc->alt_ioc->name, rc);
2464                 alt_ioc_ready = 0;
2465                 reset_alt_ioc_active = 0;
2466         }
2467
2468         if (alt_ioc_ready) {
2469                 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2470                         alt_ioc_ready = 0;
2471                         reset_alt_ioc_active = 0;
2472                         printk(MYIOC_s_WARN_FMT
2473                                 ": alt-ioc: (%d) init failure WARNING!\n",
2474                                         ioc->alt_ioc->name, rc);
2475                 }
2476         }
2477
2478         if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2479                 if (ioc->upload_fw) {
2480                         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2481                             "firmware upload required!\n", ioc->name));
2482
2483                         /* Controller is not operational, cannot do upload
2484                          */
2485                         if (ret == 0) {
2486                                 rc = mpt_do_upload(ioc, sleepFlag);
2487                                 if (rc == 0) {
2488                                         if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2489                                                 /*
2490                                                  * Maintain only one pointer to FW memory
2491                                                  * so there will not be two attempt to
2492                                                  * downloadboot onboard dual function
2493                                                  * chips (mpt_adapter_disable,
2494                                                  * mpt_diag_reset)
2495                                                  */
2496                                                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2497                                                     "mpt_upload:  alt_%s has cached_fw=%p \n",
2498                                                     ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2499                                                 ioc->cached_fw = NULL;
2500                                         }
2501                                 } else {
2502                                         printk(MYIOC_s_WARN_FMT
2503                                             "firmware upload failure!\n", ioc->name);
2504                                         ret = -6;
2505                                 }
2506                         }
2507                 }
2508         }
2509
2510         /*  Enable MPT base driver management of EventNotification
2511          *  and EventAck handling.
2512          */
2513         if ((ret == 0) && (!ioc->facts.EventState)) {
2514                 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2515                         "SendEventNotification\n",
2516                     ioc->name));
2517                 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2518         }
2519
2520         if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2521                 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2522
2523         if (ret == 0) {
2524                 /* Enable! (reply interrupt) */
2525                 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2526                 ioc->active = 1;
2527         }
2528         if (rc == 0) {  /* alt ioc */
2529                 if (reset_alt_ioc_active && ioc->alt_ioc) {
2530                         /* (re)Enable alt-IOC! (reply interrupt) */
2531                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2532                                 "reply irq re-enabled\n",
2533                                 ioc->alt_ioc->name));
2534                         CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2535                                 MPI_HIM_DIM);
2536                         ioc->alt_ioc->active = 1;
2537                 }
2538         }
2539
2540
2541         /*      Add additional "reason" check before call to GetLanConfigPages
2542          *      (combined with GetIoUnitPage2 call).  This prevents a somewhat
2543          *      recursive scenario; GetLanConfigPages times out, timer expired
2544          *      routine calls HardResetHandler, which calls into here again,
2545          *      and we try GetLanConfigPages again...
2546          */
2547         if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2548
2549                 /*
2550                  * Initialize link list for inactive raid volumes.
2551                  */
2552                 mutex_init(&ioc->raid_data.inactive_list_mutex);
2553                 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2554
2555                 switch (ioc->bus_type) {
2556
2557                 case SAS:
2558                         /* clear persistency table */
2559                         if(ioc->facts.IOCExceptions &
2560                             MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2561                                 ret = mptbase_sas_persist_operation(ioc,
2562                                     MPI_SAS_OP_CLEAR_NOT_PRESENT);
2563                                 if(ret != 0)
2564                                         goto out;
2565                         }
2566
2567                         /* Find IM volumes
2568                          */
2569                         mpt_findImVolumes(ioc);
2570
2571                         /* Check, and possibly reset, the coalescing value
2572                          */
2573                         mpt_read_ioc_pg_1(ioc);
2574
2575                         break;
2576
2577                 case FC:
2578                         if ((ioc->pfacts[0].ProtocolFlags &
2579                                 MPI_PORTFACTS_PROTOCOL_LAN) &&
2580                             (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2581                                 /*
2582                                  *  Pre-fetch the ports LAN MAC address!
2583                                  *  (LANPage1_t stuff)
2584                                  */
2585                                 (void) GetLanConfigPages(ioc);
2586                                 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2587                                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2588                                         "LanAddr = %pMR\n", ioc->name, a));
2589                         }
2590                         break;
2591
2592                 case SPI:
2593                         /* Get NVRAM and adapter maximums from SPP 0 and 2
2594                          */
2595                         mpt_GetScsiPortSettings(ioc, 0);
2596
2597                         /* Get version and length of SDP 1
2598                          */
2599                         mpt_readScsiDevicePageHeaders(ioc, 0);
2600
2601                         /* Find IM volumes
2602                          */
2603                         if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2604                                 mpt_findImVolumes(ioc);
2605
2606                         /* Check, and possibly reset, the coalescing value
2607                          */
2608                         mpt_read_ioc_pg_1(ioc);
2609
2610                         mpt_read_ioc_pg_4(ioc);
2611
2612                         break;
2613                 }
2614
2615                 GetIoUnitPage2(ioc);
2616                 mpt_get_manufacturing_pg_0(ioc);
2617         }
2618
2619  out:
2620         if ((ret != 0) && irq_allocated) {
2621                 free_irq(ioc->pci_irq, ioc);
2622                 if (ioc->msi_enable)
2623                         pci_disable_msi(ioc->pcidev);
2624         }
2625         return ret;
2626 }
2627
2628 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2629 /**
2630  *      mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2631  *      @ioc: Pointer to MPT adapter structure
2632  *      @pdev: Pointer to (struct pci_dev) structure
2633  *
2634  *      Search for PCI bus/dev_function which matches
2635  *      PCI bus/dev_function (+/-1) for newly discovered 929,
2636  *      929X, 1030 or 1035.
2637  *
2638  *      If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2639  *      using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2640  */
2641 static void
2642 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2643 {
2644         struct pci_dev *peer=NULL;
2645         unsigned int slot = PCI_SLOT(pdev->devfn);
2646         unsigned int func = PCI_FUNC(pdev->devfn);
2647         MPT_ADAPTER *ioc_srch;
2648
2649         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2650             " searching for devfn match on %x or %x\n",
2651             ioc->name, pci_name(pdev), pdev->bus->number,
2652             pdev->devfn, func-1, func+1));
2653
2654         peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2655         if (!peer) {
2656                 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2657                 if (!peer)
2658                         return;
2659         }
2660
2661         list_for_each_entry(ioc_srch, &ioc_list, list) {
2662                 struct pci_dev *_pcidev = ioc_srch->pcidev;
2663                 if (_pcidev == peer) {
2664                         /* Paranoia checks */
2665                         if (ioc->alt_ioc != NULL) {
2666                                 printk(MYIOC_s_WARN_FMT
2667                                     "Oops, already bound (%s <==> %s)!\n",
2668                                     ioc->name, ioc->name, ioc->alt_ioc->name);
2669                                 break;
2670                         } else if (ioc_srch->alt_ioc != NULL) {
2671                                 printk(MYIOC_s_WARN_FMT
2672                                     "Oops, already bound (%s <==> %s)!\n",
2673                                     ioc_srch->name, ioc_srch->name,
2674                                     ioc_srch->alt_ioc->name);
2675                                 break;
2676                         }
2677                         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2678                                 "FOUND! binding %s <==> %s\n",
2679                                 ioc->name, ioc->name, ioc_srch->name));
2680                         ioc_srch->alt_ioc = ioc;
2681                         ioc->alt_ioc = ioc_srch;
2682                 }
2683         }
2684         pci_dev_put(peer);
2685 }
2686
2687 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2688 /**
2689  *      mpt_adapter_disable - Disable misbehaving MPT adapter.
2690  *      @ioc: Pointer to MPT adapter structure
2691  */
2692 static void
2693 mpt_adapter_disable(MPT_ADAPTER *ioc)
2694 {
2695         int sz;
2696         int ret;
2697
2698         if (ioc->cached_fw != NULL) {
2699                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2700                         "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2701                 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2702                     ioc->cached_fw, CAN_SLEEP)) < 0) {
2703                         printk(MYIOC_s_WARN_FMT
2704                             ": firmware downloadboot failure (%d)!\n",
2705                             ioc->name, ret);
2706                 }
2707         }
2708
2709         /*
2710          * Put the controller into ready state (if its not already)
2711          */
2712         if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2713                 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2714                     CAN_SLEEP)) {
2715                         if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2716                                 printk(MYIOC_s_ERR_FMT "%s:  IOC msg unit "
2717                                     "reset failed to put ioc in ready state!\n",
2718                                     ioc->name, __func__);
2719                 } else
2720                         printk(MYIOC_s_ERR_FMT "%s:  IOC msg unit reset "
2721                             "failed!\n", ioc->name, __func__);
2722         }
2723
2724
2725         /* Disable adapter interrupts! */
2726         synchronize_irq(ioc->pcidev->irq);
2727         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2728         ioc->active = 0;
2729
2730         /* Clear any lingering interrupt */
2731         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2732         CHIPREG_READ32(&ioc->chip->IntStatus);
2733
2734         if (ioc->alloc != NULL) {
2735                 sz = ioc->alloc_sz;
2736                 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free  @ %p, sz=%d bytes\n",
2737                     ioc->name, ioc->alloc, ioc->alloc_sz));
2738                 pci_free_consistent(ioc->pcidev, sz,
2739                                 ioc->alloc, ioc->alloc_dma);
2740                 ioc->reply_frames = NULL;
2741                 ioc->req_frames = NULL;
2742                 ioc->alloc = NULL;
2743                 ioc->alloc_total -= sz;
2744         }
2745
2746         if (ioc->sense_buf_pool != NULL) {
2747                 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2748                 pci_free_consistent(ioc->pcidev, sz,
2749                                 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
2750                 ioc->sense_buf_pool = NULL;
2751                 ioc->alloc_total -= sz;
2752         }
2753
2754         if (ioc->events != NULL){
2755                 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2756                 kfree(ioc->events);
2757                 ioc->events = NULL;
2758                 ioc->alloc_total -= sz;
2759         }
2760
2761         mpt_free_fw_memory(ioc);
2762
2763         kfree(ioc->spi_data.nvram);
2764         mpt_inactive_raid_list_free(ioc);
2765         kfree(ioc->raid_data.pIocPg2);
2766         kfree(ioc->raid_data.pIocPg3);
2767         ioc->spi_data.nvram = NULL;
2768         ioc->raid_data.pIocPg3 = NULL;
2769
2770         if (ioc->spi_data.pIocPg4 != NULL) {
2771                 sz = ioc->spi_data.IocPg4Sz;
2772                 pci_free_consistent(ioc->pcidev, sz,
2773                         ioc->spi_data.pIocPg4,
2774                         ioc->spi_data.IocPg4_dma);
2775                 ioc->spi_data.pIocPg4 = NULL;
2776                 ioc->alloc_total -= sz;
2777         }
2778
2779         if (ioc->ReqToChain != NULL) {
2780                 kfree(ioc->ReqToChain);
2781                 kfree(ioc->RequestNB);
2782                 ioc->ReqToChain = NULL;
2783         }
2784
2785         kfree(ioc->ChainToChain);
2786         ioc->ChainToChain = NULL;
2787
2788         if (ioc->HostPageBuffer != NULL) {
2789                 if((ret = mpt_host_page_access_control(ioc,
2790                     MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2791                         printk(MYIOC_s_ERR_FMT
2792                            ": %s: host page buffers free failed (%d)!\n",
2793                             ioc->name, __func__, ret);
2794                 }
2795                 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2796                         "HostPageBuffer free  @ %p, sz=%d bytes\n",
2797                         ioc->name, ioc->HostPageBuffer,
2798                         ioc->HostPageBuffer_sz));
2799                 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
2800                     ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2801                 ioc->HostPageBuffer = NULL;
2802                 ioc->HostPageBuffer_sz = 0;
2803                 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2804         }
2805
2806         pci_set_drvdata(ioc->pcidev, NULL);
2807 }
2808 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2809 /**
2810  *      mpt_adapter_dispose - Free all resources associated with an MPT adapter
2811  *      @ioc: Pointer to MPT adapter structure
2812  *
2813  *      This routine unregisters h/w resources and frees all alloc'd memory
2814  *      associated with a MPT adapter structure.
2815  */
2816 static void
2817 mpt_adapter_dispose(MPT_ADAPTER *ioc)
2818 {
2819         int sz_first, sz_last;
2820
2821         if (ioc == NULL)
2822                 return;
2823
2824         sz_first = ioc->alloc_total;
2825
2826         mpt_adapter_disable(ioc);
2827
2828         if (ioc->pci_irq != -1) {
2829                 free_irq(ioc->pci_irq, ioc);
2830                 if (ioc->msi_enable)
2831                         pci_disable_msi(ioc->pcidev);
2832                 ioc->pci_irq = -1;
2833         }
2834
2835         if (ioc->memmap != NULL) {
2836                 iounmap(ioc->memmap);
2837                 ioc->memmap = NULL;
2838         }
2839
2840         pci_disable_device(ioc->pcidev);
2841         pci_release_selected_regions(ioc->pcidev, ioc->bars);
2842
2843         /*  Zap the adapter lookup ptr!  */
2844         list_del(&ioc->list);
2845
2846         sz_last = ioc->alloc_total;
2847         dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2848             ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2849
2850         if (ioc->alt_ioc)
2851                 ioc->alt_ioc->alt_ioc = NULL;
2852
2853         kfree(ioc);
2854 }
2855
2856 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2857 /**
2858  *      MptDisplayIocCapabilities - Disply IOC's capabilities.
2859  *      @ioc: Pointer to MPT adapter structure
2860  */
2861 static void
2862 MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2863 {
2864         int i = 0;
2865
2866         printk(KERN_INFO "%s: ", ioc->name);
2867         if (ioc->prod_name)
2868                 pr_cont("%s: ", ioc->prod_name);
2869         pr_cont("Capabilities={");
2870
2871         if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2872                 pr_cont("Initiator");
2873                 i++;
2874         }
2875
2876         if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2877                 pr_cont("%sTarget", i ? "," : "");
2878                 i++;
2879         }
2880
2881         if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2882                 pr_cont("%sLAN", i ? "," : "");
2883                 i++;
2884         }
2885
2886 #if 0
2887         /*
2888          *  This would probably evoke more questions than it's worth
2889          */
2890         if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2891                 pr_cont("%sLogBusAddr", i ? "," : "");
2892                 i++;
2893         }
2894 #endif
2895
2896         pr_cont("}\n");
2897 }
2898
2899 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2900 /**
2901  *      MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2902  *      @ioc: Pointer to MPT_ADAPTER structure
2903  *      @force: Force hard KickStart of IOC
2904  *      @sleepFlag: Specifies whether the process can sleep
2905  *
2906  *      Returns:
2907  *               1 - DIAG reset and READY
2908  *               0 - READY initially OR soft reset and READY
2909  *              -1 - Any failure on KickStart
2910  *              -2 - Msg Unit Reset Failed
2911  *              -3 - IO Unit Reset Failed
2912  *              -4 - IOC owned by a PEER
2913  */
2914 static int
2915 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2916 {
2917         u32      ioc_state;
2918         int      statefault = 0;
2919         int      cntdn;
2920         int      hard_reset_done = 0;
2921         int      r;
2922         int      ii;
2923         int      whoinit;
2924
2925         /* Get current [raw] IOC state  */
2926         ioc_state = mpt_GetIocState(ioc, 0);
2927         dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2928
2929         /*
2930          *      Check to see if IOC got left/stuck in doorbell handshake
2931          *      grip of death.  If so, hard reset the IOC.
2932          */
2933         if (ioc_state & MPI_DOORBELL_ACTIVE) {
2934                 statefault = 1;
2935                 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2936                                 ioc->name);
2937         }
2938
2939         /* Is it already READY? */
2940         if (!statefault &&
2941             ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2942                 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2943                     "IOC is in READY state\n", ioc->name));
2944                 return 0;
2945         }
2946
2947         /*
2948          *      Check to see if IOC is in FAULT state.
2949          */
2950         if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2951                 statefault = 2;
2952                 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2953                     ioc->name);
2954                 printk(MYIOC_s_WARN_FMT "           FAULT code = %04xh\n",
2955                     ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2956         }
2957
2958         /*
2959          *      Hmmm...  Did it get left operational?
2960          */
2961         if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2962                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2963                                 ioc->name));
2964
2965                 /* Check WhoInit.
2966                  * If PCI Peer, exit.
2967                  * Else, if no fault conditions are present, issue a MessageUnitReset
2968                  * Else, fall through to KickStart case
2969                  */
2970                 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2971                 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2972                         "whoinit 0x%x statefault %d force %d\n",
2973                         ioc->name, whoinit, statefault, force));
2974                 if (whoinit == MPI_WHOINIT_PCI_PEER)
2975                         return -4;
2976                 else {
2977                         if ((statefault == 0 ) && (force == 0)) {
2978                                 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2979                                         return 0;
2980                         }
2981                         statefault = 3;
2982                 }
2983         }
2984
2985         hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2986         if (hard_reset_done < 0)
2987                 return -1;
2988
2989         /*
2990          *  Loop here waiting for IOC to come READY.
2991          */
2992         ii = 0;
2993         cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5;     /* 5 seconds */
2994
2995         while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2996                 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2997                         /*
2998                          *  BIOS or previous driver load left IOC in OP state.
2999                          *  Reset messaging FIFOs.
3000                          */
3001                         if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
3002                                 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
3003                                 return -2;
3004                         }
3005                 } else if (ioc_state == MPI_IOC_STATE_RESET) {
3006                         /*
3007                          *  Something is wrong.  Try to get IOC back
3008                          *  to a known state.
3009                          */
3010                         if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3011                                 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3012                                 return -3;
3013                         }
3014                 }
3015
3016                 ii++; cntdn--;
3017                 if (!cntdn) {
3018                         printk(MYIOC_s_ERR_FMT
3019                                 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3020                                 ioc->name, ioc_state, (int)((ii+5)/HZ));
3021                         return -ETIME;
3022                 }
3023
3024                 if (sleepFlag == CAN_SLEEP) {
3025                         msleep(1);
3026                 } else {
3027                         mdelay (1);     /* 1 msec delay */
3028                 }
3029
3030         }
3031
3032         if (statefault < 3) {
3033                 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3034                         statefault == 1 ? "stuck handshake" : "IOC FAULT");
3035         }
3036
3037         return hard_reset_done;
3038 }
3039
3040 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3041 /**
3042  *      mpt_GetIocState - Get the current state of a MPT adapter.
3043  *      @ioc: Pointer to MPT_ADAPTER structure
3044  *      @cooked: Request raw or cooked IOC state
3045  *
3046  *      Returns all IOC Doorbell register bits if cooked==0, else just the
3047  *      Doorbell bits in MPI_IOC_STATE_MASK.
3048  */
3049 u32
3050 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3051 {
3052         u32 s, sc;
3053
3054         /*  Get!  */
3055         s = CHIPREG_READ32(&ioc->chip->Doorbell);
3056         sc = s & MPI_IOC_STATE_MASK;
3057
3058         /*  Save!  */
3059         ioc->last_state = sc;
3060
3061         return cooked ? sc : s;
3062 }
3063
3064 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3065 /**
3066  *      GetIocFacts - Send IOCFacts request to MPT adapter.
3067  *      @ioc: Pointer to MPT_ADAPTER structure
3068  *      @sleepFlag: Specifies whether the process can sleep
3069  *      @reason: If recovery, only update facts.
3070  *
3071  *      Returns 0 for success, non-zero for failure.
3072  */
3073 static int
3074 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3075 {
3076         IOCFacts_t               get_facts;
3077         IOCFactsReply_t         *facts;
3078         int                      r;
3079         int                      req_sz;
3080         int                      reply_sz;
3081         int                      sz;
3082         u32                      status, vv;
3083         u8                       shiftFactor=1;
3084
3085         /* IOC *must* NOT be in RESET state! */
3086         if (ioc->last_state == MPI_IOC_STATE_RESET) {
3087                 printk(KERN_ERR MYNAM
3088                     ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3089                     ioc->name, ioc->last_state);
3090                 return -44;
3091         }
3092
3093         facts = &ioc->facts;
3094
3095         /* Destination (reply area)... */
3096         reply_sz = sizeof(*facts);
3097         memset(facts, 0, reply_sz);
3098
3099         /* Request area (get_facts on the stack right now!) */
3100         req_sz = sizeof(get_facts);
3101         memset(&get_facts, 0, req_sz);
3102
3103         get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3104         /* Assert: All other get_facts fields are zero! */
3105
3106         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3107             "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3108             ioc->name, req_sz, reply_sz));
3109
3110         /* No non-zero fields in the get_facts request are greater than
3111          * 1 byte in size, so we can just fire it off as is.
3112          */
3113         r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3114                         reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3115         if (r != 0)
3116                 return r;
3117
3118         /*
3119          * Now byte swap (GRRR) the necessary fields before any further
3120          * inspection of reply contents.
3121          *
3122          * But need to do some sanity checks on MsgLength (byte) field
3123          * to make sure we don't zero IOC's req_sz!
3124          */
3125         /* Did we get a valid reply? */
3126         if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3127                 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3128                         /*
3129                          * If not been here, done that, save off first WhoInit value
3130                          */
3131                         if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3132                                 ioc->FirstWhoInit = facts->WhoInit;
3133                 }
3134
3135                 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3136                 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3137                 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3138                 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3139                 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3140                 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3141                 /* CHECKME! IOCStatus, IOCLogInfo */
3142
3143                 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3144                 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3145
3146                 /*
3147                  * FC f/w version changed between 1.1 and 1.2
3148                  *      Old: u16{Major(4),Minor(4),SubMinor(8)}
3149                  *      New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3150                  */
3151                 if (facts->MsgVersion < MPI_VERSION_01_02) {
3152                         /*
3153                          *      Handle old FC f/w style, convert to new...
3154                          */
3155                         u16      oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3156                         facts->FWVersion.Word =
3157                                         ((oldv<<12) & 0xFF000000) |
3158                                         ((oldv<<8)  & 0x000FFF00);
3159                 } else
3160                         facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3161
3162                 facts->ProductID = le16_to_cpu(facts->ProductID);
3163
3164                 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3165                     > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3166                         ioc->ir_firmware = 1;
3167
3168                 facts->CurrentHostMfaHighAddr =
3169                                 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3170                 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3171                 facts->CurrentSenseBufferHighAddr =
3172                                 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3173                 facts->CurReplyFrameSize =
3174                                 le16_to_cpu(facts->CurReplyFrameSize);
3175                 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3176
3177                 /*
3178                  * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3179                  * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3180                  * to 14 in MPI-1.01.0x.
3181                  */
3182                 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3183                     facts->MsgVersion > MPI_VERSION_01_00) {
3184                         facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3185                 }
3186
3187                 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3188
3189                 if (!facts->RequestFrameSize) {
3190                         /*  Something is wrong!  */
3191                         printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3192                                         ioc->name);
3193                         return -55;
3194                 }
3195
3196                 r = sz = facts->BlockSize;
3197                 vv = ((63 / (sz * 4)) + 1) & 0x03;
3198                 ioc->NB_for_64_byte_frame = vv;
3199                 while ( sz )
3200                 {
3201                         shiftFactor++;
3202                         sz = sz >> 1;
3203                 }
3204                 ioc->NBShiftFactor  = shiftFactor;
3205                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3206                     "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3207                     ioc->name, vv, shiftFactor, r));
3208
3209                 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3210                         /*
3211                          * Set values for this IOC's request & reply frame sizes,
3212                          * and request & reply queue depths...
3213                          */
3214                         ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3215                         ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3216                         ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3217                         ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3218
3219                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3220                                 ioc->name, ioc->reply_sz, ioc->reply_depth));
3221                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz  =%3d, req_depth  =%4d\n",
3222                                 ioc->name, ioc->req_sz, ioc->req_depth));
3223
3224                         /* Get port facts! */
3225                         if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3226                                 return r;
3227                 }
3228         } else {
3229                 printk(MYIOC_s_ERR_FMT
3230                      "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3231                      ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3232                      RequestFrameSize)/sizeof(u32)));
3233                 return -66;
3234         }
3235
3236         return 0;
3237 }
3238
3239 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3240 /**
3241  *      GetPortFacts - Send PortFacts request to MPT adapter.
3242  *      @ioc: Pointer to MPT_ADAPTER structure
3243  *      @portnum: Port number
3244  *      @sleepFlag: Specifies whether the process can sleep
3245  *
3246  *      Returns 0 for success, non-zero for failure.
3247  */
3248 static int
3249 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3250 {
3251         PortFacts_t              get_pfacts;
3252         PortFactsReply_t        *pfacts;
3253         int                      ii;
3254         int                      req_sz;
3255         int                      reply_sz;
3256         int                      max_id;
3257
3258         /* IOC *must* NOT be in RESET state! */
3259         if (ioc->last_state == MPI_IOC_STATE_RESET) {
3260                 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3261                     ioc->name, ioc->last_state );
3262                 return -4;
3263         }
3264
3265         pfacts = &ioc->pfacts[portnum];
3266
3267         /* Destination (reply area)...  */
3268         reply_sz = sizeof(*pfacts);
3269         memset(pfacts, 0, reply_sz);
3270
3271         /* Request area (get_pfacts on the stack right now!) */
3272         req_sz = sizeof(get_pfacts);
3273         memset(&get_pfacts, 0, req_sz);
3274
3275         get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3276         get_pfacts.PortNumber = portnum;
3277         /* Assert: All other get_pfacts fields are zero! */
3278
3279         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3280                         ioc->name, portnum));
3281
3282         /* No non-zero fields in the get_pfacts request are greater than
3283          * 1 byte in size, so we can just fire it off as is.
3284          */
3285         ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3286                                 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3287         if (ii != 0)
3288                 return ii;
3289
3290         /* Did we get a valid reply? */
3291
3292         /* Now byte swap the necessary fields in the response. */
3293         pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3294         pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3295         pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3296         pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3297         pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3298         pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3299         pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3300         pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3301         pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3302
3303         max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3304             pfacts->MaxDevices;
3305         ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3306         ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3307
3308         /*
3309          * Place all the devices on channels
3310          *
3311          * (for debuging)
3312          */
3313         if (mpt_channel_mapping) {
3314                 ioc->devices_per_bus = 1;
3315                 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3316         }
3317
3318         return 0;
3319 }
3320
3321 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3322 /**
3323  *      SendIocInit - Send IOCInit request to MPT adapter.
3324  *      @ioc: Pointer to MPT_ADAPTER structure
3325  *      @sleepFlag: Specifies whether the process can sleep
3326  *
3327  *      Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3328  *
3329  *      Returns 0 for success, non-zero for failure.
3330  */
3331 static int
3332 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3333 {
3334         IOCInit_t                ioc_init;
3335         MPIDefaultReply_t        init_reply;
3336         u32                      state;
3337         int                      r;
3338         int                      count;
3339         int                      cntdn;
3340
3341         memset(&ioc_init, 0, sizeof(ioc_init));
3342         memset(&init_reply, 0, sizeof(init_reply));
3343
3344         ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3345         ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3346
3347         /* If we are in a recovery mode and we uploaded the FW image,
3348          * then this pointer is not NULL. Skip the upload a second time.
3349          * Set this flag if cached_fw set for either IOC.
3350          */
3351         if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3352                 ioc->upload_fw = 1;
3353         else
3354                 ioc->upload_fw = 0;
3355         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3356                    ioc->name, ioc->upload_fw, ioc->facts.Flags));
3357
3358         ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3359         ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3360
3361         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3362                    ioc->name, ioc->facts.MsgVersion));
3363         if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3364                 // set MsgVersion and HeaderVersion host driver was built with
3365                 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3366                 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3367
3368                 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3369                         ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3370                 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3371                         return -99;
3372         }
3373         ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz);   /* in BYTES */
3374
3375         if (ioc->sg_addr_size == sizeof(u64)) {
3376                 /* Save the upper 32-bits of the request
3377                  * (reply) and sense buffers.
3378                  */
3379                 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3380                 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3381         } else {
3382                 /* Force 32-bit addressing */
3383                 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3384                 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3385         }
3386
3387         ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3388         ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3389         ioc->facts.MaxDevices = ioc_init.MaxDevices;
3390         ioc->facts.MaxBuses = ioc_init.MaxBuses;
3391
3392         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3393                         ioc->name, &ioc_init));
3394
3395         r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3396                                 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3397         if (r != 0) {
3398                 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3399                 return r;
3400         }
3401
3402         /* No need to byte swap the multibyte fields in the reply
3403          * since we don't even look at its contents.
3404          */
3405
3406         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3407                         ioc->name, &ioc_init));
3408
3409         if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3410                 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3411                 return r;
3412         }
3413
3414         /* YIKES!  SUPER IMPORTANT!!!
3415          *  Poll IocState until _OPERATIONAL while IOC is doing
3416          *  LoopInit and TargetDiscovery!
3417          */
3418         count = 0;
3419         cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60;    /* 60 seconds */
3420         state = mpt_GetIocState(ioc, 1);
3421         while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3422                 if (sleepFlag == CAN_SLEEP) {
3423                         msleep(1);
3424                 } else {
3425                         mdelay(1);
3426                 }
3427
3428                 if (!cntdn) {
3429                         printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3430                                         ioc->name, (int)((count+5)/HZ));
3431                         return -9;
3432                 }
3433
3434                 state = mpt_GetIocState(ioc, 1);
3435                 count++;
3436         }
3437         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3438                         ioc->name, count));
3439
3440         ioc->aen_event_read_flag=0;
3441         return r;
3442 }
3443
3444 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3445 /**
3446  *      SendPortEnable - Send PortEnable request to MPT adapter port.
3447  *      @ioc: Pointer to MPT_ADAPTER structure
3448  *      @portnum: Port number to enable
3449  *      @sleepFlag: Specifies whether the process can sleep
3450  *
3451  *      Send PortEnable to bring IOC to OPERATIONAL state.
3452  *
3453  *      Returns 0 for success, non-zero for failure.
3454  */
3455 static int
3456 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3457 {
3458         PortEnable_t             port_enable;
3459         MPIDefaultReply_t        reply_buf;
3460         int      rc;
3461         int      req_sz;
3462         int      reply_sz;
3463
3464         /*  Destination...  */
3465         reply_sz = sizeof(MPIDefaultReply_t);
3466         memset(&reply_buf, 0, reply_sz);
3467
3468         req_sz = sizeof(PortEnable_t);
3469         memset(&port_enable, 0, req_sz);
3470
3471         port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3472         port_enable.PortNumber = portnum;
3473 /*      port_enable.ChainOffset = 0;            */
3474 /*      port_enable.MsgFlags = 0;               */
3475 /*      port_enable.MsgContext = 0;             */
3476
3477         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3478                         ioc->name, portnum, &port_enable));
3479
3480         /* RAID FW may take a long time to enable
3481          */
3482         if (ioc->ir_firmware || ioc->bus_type == SAS) {
3483                 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3484                 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3485                 300 /*seconds*/, sleepFlag);
3486         } else {
3487                 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3488                 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3489                 30 /*seconds*/, sleepFlag);
3490         }
3491         return rc;
3492 }
3493
3494 /**
3495  *      mpt_alloc_fw_memory - allocate firmware memory
3496  *      @ioc: Pointer to MPT_ADAPTER structure
3497  *      @size: total FW bytes
3498  *
3499  *      If memory has already been allocated, the same (cached) value
3500  *      is returned.
3501  *
3502  *      Return 0 if successful, or non-zero for failure
3503  **/
3504 int
3505 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3506 {
3507         int rc;
3508
3509         if (ioc->cached_fw) {
3510                 rc = 0;  /* use already allocated memory */
3511                 goto out;
3512         }
3513         else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3514                 ioc->cached_fw = ioc->alt_ioc->cached_fw;  /* use alt_ioc's memory */
3515                 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3516                 rc = 0;
3517                 goto out;
3518         }
3519         ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3520         if (!ioc->cached_fw) {
3521                 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3522                     ioc->name);
3523                 rc = -1;
3524         } else {
3525                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image  @ %p[%p], sz=%d[%x] bytes\n",
3526                     ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3527                 ioc->alloc_total += size;
3528                 rc = 0;
3529         }
3530  out:
3531         return rc;
3532 }
3533
3534 /**
3535  *      mpt_free_fw_memory - free firmware memory
3536  *      @ioc: Pointer to MPT_ADAPTER structure
3537  *
3538  *      If alt_img is NULL, delete from ioc structure.
3539  *      Else, delete a secondary image in same format.
3540  **/
3541 void
3542 mpt_free_fw_memory(MPT_ADAPTER *ioc)
3543 {
3544         int sz;
3545
3546         if (!ioc->cached_fw)
3547                 return;
3548
3549         sz = ioc->facts.FWImageSize;
3550         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image  @ %p[%p], sz=%d[%x] bytes\n",
3551                  ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3552         pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3553         ioc->alloc_total -= sz;
3554         ioc->cached_fw = NULL;
3555 }
3556
3557 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3558 /**
3559  *      mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3560  *      @ioc: Pointer to MPT_ADAPTER structure
3561  *      @sleepFlag: Specifies whether the process can sleep
3562  *
3563  *      Returns 0 for success, >0 for handshake failure
3564  *              <0 for fw upload failure.
3565  *
3566  *      Remark: If bound IOC and a successful FWUpload was performed
3567  *      on the bound IOC, the second image is discarded
3568  *      and memory is free'd. Both channels must upload to prevent
3569  *      IOC from running in degraded mode.
3570  */
3571 static int
3572 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3573 {
3574         u8                       reply[sizeof(FWUploadReply_t)];
3575         FWUpload_t              *prequest;
3576         FWUploadReply_t         *preply;
3577         FWUploadTCSGE_t         *ptcsge;
3578         u32                      flagsLength;
3579         int                      ii, sz, reply_sz;
3580         int                      cmdStatus;
3581         int                     request_size;
3582         /* If the image size is 0, we are done.
3583          */
3584         if ((sz = ioc->facts.FWImageSize) == 0)
3585                 return 0;
3586
3587         if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3588                 return -ENOMEM;
3589
3590         dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image  @ %p[%p], sz=%d[%x] bytes\n",
3591             ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3592
3593         prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3594             kzalloc(ioc->req_sz, GFP_KERNEL);
3595         if (!prequest) {
3596                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3597                     "while allocating memory \n", ioc->name));
3598                 mpt_free_fw_memory(ioc);
3599                 return -ENOMEM;
3600         }
3601
3602         preply = (FWUploadReply_t *)&reply;
3603
3604         reply_sz = sizeof(reply);
3605         memset(preply, 0, reply_sz);
3606
3607         prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3608         prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3609
3610         ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3611         ptcsge->DetailsLength = 12;
3612         ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3613         ptcsge->ImageSize = cpu_to_le32(sz);
3614         ptcsge++;
3615
3616         flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3617         ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3618         request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3619             ioc->SGE_size;
3620         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3621             " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3622             ioc->facts.FWImageSize, request_size));
3623         DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3624
3625         ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3626             reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3627
3628         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3629             "rc=%x \n", ioc->name, ii));
3630
3631         cmdStatus = -EFAULT;
3632         if (ii == 0) {
3633                 /* Handshake transfer was complete and successful.
3634                  * Check the Reply Frame.
3635                  */
3636                 int status;
3637                 status = le16_to_cpu(preply->IOCStatus) &
3638                                 MPI_IOCSTATUS_MASK;
3639                 if (status == MPI_IOCSTATUS_SUCCESS &&
3640                     ioc->facts.FWImageSize ==
3641                     le32_to_cpu(preply->ActualImageSize))
3642                                 cmdStatus = 0;
3643         }
3644         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3645                         ioc->name, cmdStatus));
3646
3647
3648         if (cmdStatus) {
3649                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3650                     "freeing image \n", ioc->name));
3651                 mpt_free_fw_memory(ioc);
3652         }
3653         kfree(prequest);
3654
3655         return cmdStatus;
3656 }
3657
3658 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3659 /**
3660  *      mpt_downloadboot - DownloadBoot code
3661  *      @ioc: Pointer to MPT_ADAPTER structure
3662  *      @pFwHeader: Pointer to firmware header info
3663  *      @sleepFlag: Specifies whether the process can sleep
3664  *
3665  *      FwDownloadBoot requires Programmed IO access.
3666  *
3667  *      Returns 0 for success
3668  *              -1 FW Image size is 0
3669  *              -2 No valid cached_fw Pointer
3670  *              <0 for fw upload failure.
3671  */
3672 static int
3673 mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3674 {
3675         MpiExtImageHeader_t     *pExtImage;
3676         u32                      fwSize;
3677         u32                      diag0val;
3678         int                      count;
3679         u32                     *ptrFw;
3680         u32                      diagRwData;
3681         u32                      nextImage;
3682         u32                      load_addr;
3683         u32                      ioc_state=0;
3684
3685         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3686                                 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3687
3688         CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3689         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3690         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3691         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3692         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3693         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3694
3695         CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3696
3697         /* wait 1 msec */
3698         if (sleepFlag == CAN_SLEEP) {
3699                 msleep(1);
3700         } else {
3701                 mdelay (1);
3702         }
3703
3704         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3705         CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3706
3707         for (count = 0; count < 30; count ++) {
3708                 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3709                 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3710                         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3711                                 ioc->name, count));
3712                         break;
3713                 }
3714                 /* wait .1 sec */
3715                 if (sleepFlag == CAN_SLEEP) {
3716                         msleep (100);
3717                 } else {
3718                         mdelay (100);
3719                 }
3720         }
3721
3722         if ( count == 30 ) {
3723                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3724                 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3725                 ioc->name, diag0val));
3726                 return -3;
3727         }
3728
3729         CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3730         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3731         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3732         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3733         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3734         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3735
3736         /* Set the DiagRwEn and Disable ARM bits */
3737         CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3738
3739         fwSize = (pFwHeader->ImageSize + 3)/4;
3740         ptrFw = (u32 *) pFwHeader;
3741
3742         /* Write the LoadStartAddress to the DiagRw Address Register
3743          * using Programmed IO
3744          */
3745         if (ioc->errata_flag_1064)
3746                 pci_enable_io_access(ioc->pcidev);
3747
3748         CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3749         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3750                 ioc->name, pFwHeader->LoadStartAddress));
3751
3752         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3753                                 ioc->name, fwSize*4, ptrFw));
3754         while (fwSize--) {
3755                 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3756         }
3757
3758         nextImage = pFwHeader->NextImageHeaderOffset;
3759         while (nextImage) {
3760                 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3761
3762                 load_addr = pExtImage->LoadStartAddress;
3763
3764                 fwSize = (pExtImage->ImageSize + 3) >> 2;
3765                 ptrFw = (u32 *)pExtImage;
3766
3767                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3768                                                 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3769                 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3770
3771                 while (fwSize--) {
3772                         CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3773                 }
3774                 nextImage = pExtImage->NextImageHeaderOffset;
3775         }
3776
3777         /* Write the IopResetVectorRegAddr */
3778         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name,  pFwHeader->IopResetRegAddr));
3779         CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3780
3781         /* Write the IopResetVectorValue */
3782         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3783         CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3784
3785         /* Clear the internal flash bad bit - autoincrementing register,
3786          * so must do two writes.
3787          */
3788         if (ioc->bus_type == SPI) {
3789                 /*
3790                  * 1030 and 1035 H/W errata, workaround to access
3791                  * the ClearFlashBadSignatureBit
3792                  */
3793                 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3794                 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3795                 diagRwData |= 0x40000000;
3796                 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3797                 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3798
3799         } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3800                 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3801                 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3802                     MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3803
3804                 /* wait 1 msec */
3805                 if (sleepFlag == CAN_SLEEP) {
3806                         msleep (1);
3807                 } else {
3808                         mdelay (1);
3809                 }
3810         }
3811
3812         if (ioc->errata_flag_1064)
3813                 pci_disable_io_access(ioc->pcidev);
3814
3815         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3816         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3817                 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3818                 ioc->name, diag0val));
3819         diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3820         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3821                 ioc->name, diag0val));
3822         CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3823
3824         /* Write 0xFF to reset the sequencer */
3825         CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3826
3827         if (ioc->bus_type == SAS) {
3828                 ioc_state = mpt_GetIocState(ioc, 0);
3829                 if ( (GetIocFacts(ioc, sleepFlag,
3830                                 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3831                         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3832                                         ioc->name, ioc_state));
3833                         return -EFAULT;
3834                 }
3835         }
3836
3837         for (count=0; count<HZ*20; count++) {
3838                 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3839                         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3840                                 "downloadboot successful! (count=%d) IocState=%x\n",
3841                                 ioc->name, count, ioc_state));
3842                         if (ioc->bus_type == SAS) {
3843                                 return 0;
3844                         }
3845                         if ((SendIocInit(ioc, sleepFlag)) != 0) {
3846                                 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3847                                         "downloadboot: SendIocInit failed\n",
3848                                         ioc->name));
3849                                 return -EFAULT;
3850                         }
3851                         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3852                                         "downloadboot: SendIocInit successful\n",
3853                                         ioc->name));
3854                         return 0;
3855                 }
3856                 if (sleepFlag == CAN_SLEEP) {
3857                         msleep (10);
3858                 } else {
3859                         mdelay (10);
3860                 }
3861         }
3862         ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3863                 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3864         return -EFAULT;
3865 }
3866
3867 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3868 /**
3869  *      KickStart - Perform hard reset of MPT adapter.
3870  *      @ioc: Pointer to MPT_ADAPTER structure
3871  *      @force: Force hard reset
3872  *      @sleepFlag: Specifies whether the process can sleep
3873  *
3874  *      This routine places MPT adapter in diagnostic mode via the
3875  *      WriteSequence register, and then performs a hard reset of adapter
3876  *      via the Diagnostic register.
3877  *
3878  *      Inputs:   sleepflag - CAN_SLEEP (non-interrupt thread)
3879  *                      or NO_SLEEP (interrupt thread, use mdelay)
3880  *                force - 1 if doorbell active, board fault state
3881  *                              board operational, IOC_RECOVERY or
3882  *                              IOC_BRINGUP and there is an alt_ioc.
3883  *                        0 else
3884  *
3885  *      Returns:
3886  *               1 - hard reset, READY
3887  *               0 - no reset due to History bit, READY
3888  *              -1 - no reset due to History bit but not READY
3889  *                   OR reset but failed to come READY
3890  *              -2 - no reset, could not enter DIAG mode
3891  *              -3 - reset but bad FW bit
3892  */
3893 static int
3894 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3895 {
3896         int hard_reset_done = 0;
3897         u32 ioc_state=0;
3898         int cnt,cntdn;
3899
3900         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3901         if (ioc->bus_type == SPI) {
3902                 /* Always issue a Msg Unit Reset first. This will clear some
3903                  * SCSI bus hang conditions.
3904                  */
3905                 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3906
3907                 if (sleepFlag == CAN_SLEEP) {
3908                         msleep (1000);
3909                 } else {
3910                         mdelay (1000);
3911                 }
3912         }
3913
3914         hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3915         if (hard_reset_done < 0)
3916                 return hard_reset_done;
3917
3918         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3919                 ioc->name));
3920
3921         cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2;     /* 2 seconds */
3922         for (cnt=0; cnt<cntdn; cnt++) {
3923                 ioc_state = mpt_GetIocState(ioc, 1);
3924                 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3925                         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3926                                         ioc->name, cnt));
3927                         return hard_reset_done;
3928                 }
3929                 if (sleepFlag == CAN_SLEEP) {
3930                         msleep (10);
3931                 } else {
3932                         mdelay (10);
3933                 }
3934         }
3935
3936         dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3937                 ioc->name, mpt_GetIocState(ioc, 0)));
3938         return -1;
3939 }
3940
3941 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3942 /**
3943  *      mpt_diag_reset - Perform hard reset of the adapter.
3944  *      @ioc: Pointer to MPT_ADAPTER structure
3945  *      @ignore: Set if to honor and clear to ignore
3946  *              the reset history bit
3947  *      @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3948  *              else set to NO_SLEEP (use mdelay instead)
3949  *
3950  *      This routine places the adapter in diagnostic mode via the
3951  *      WriteSequence register and then performs a hard reset of adapter
3952  *      via the Diagnostic register. Adapter should be in ready state
3953  *      upon successful completion.
3954  *
3955  *      Returns:  1  hard reset successful
3956  *                0  no reset performed because reset history bit set
3957  *               -2  enabling diagnostic mode failed
3958  *               -3  diagnostic reset failed
3959  */
3960 static int
3961 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3962 {
3963         u32 diag0val;
3964         u32 doorbell;
3965         int hard_reset_done = 0;
3966         int count = 0;
3967         u32 diag1val = 0;
3968         MpiFwHeader_t *cached_fw;       /* Pointer to FW */
3969         u8       cb_idx;
3970
3971         /* Clear any existing interrupts */
3972         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3973
3974         if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3975
3976                 if (!ignore)
3977                         return 0;
3978
3979                 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3980                         "address=%p\n",  ioc->name, __func__,
3981                         &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3982                 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3983                 if (sleepFlag == CAN_SLEEP)
3984                         msleep(1);
3985                 else
3986                         mdelay(1);
3987
3988                 /*
3989                  * Call each currently registered protocol IOC reset handler
3990                  * with pre-reset indication.
3991                  * NOTE: If we're doing _IOC_BRINGUP, there can be no
3992                  * MptResetHandlers[] registered yet.
3993                  */
3994                 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3995                         if (MptResetHandlers[cb_idx])
3996                                 (*(MptResetHandlers[cb_idx]))(ioc,
3997                                                 MPT_IOC_PRE_RESET);
3998                 }
3999
4000                 for (count = 0; count < 60; count ++) {
4001                         doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4002                         doorbell &= MPI_IOC_STATE_MASK;
4003
4004                         drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4005                                 "looking for READY STATE: doorbell=%x"
4006                                 " count=%d\n",
4007                                 ioc->name, doorbell, count));
4008
4009                         if (doorbell == MPI_IOC_STATE_READY) {
4010                                 return 1;
4011                         }
4012
4013                         /* wait 1 sec */
4014                         if (sleepFlag == CAN_SLEEP)
4015                                 msleep(1000);
4016                         else
4017                                 mdelay(1000);
4018                 }
4019                 return -1;
4020         }
4021
4022         /* Use "Diagnostic reset" method! (only thing available!) */
4023         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4024
4025         if (ioc->debug_level & MPT_DEBUG) {
4026                 if (ioc->alt_ioc)
4027                         diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4028                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4029                         ioc->name, diag0val, diag1val));
4030         }
4031
4032         /* Do the reset if we are told to ignore the reset history
4033          * or if the reset history is 0
4034          */
4035         if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4036                 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4037                         /* Write magic sequence to WriteSequence register
4038                          * Loop until in diagnostic mode
4039                          */
4040                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4041                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4042                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4043                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4044                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4045                         CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4046
4047                         /* wait 100 msec */
4048                         if (sleepFlag == CAN_SLEEP) {
4049                                 msleep (100);
4050                         } else {
4051                                 mdelay (100);
4052                         }
4053
4054                         count++;
4055                         if (count > 20) {
4056                                 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4057                                                 ioc->name, diag0val);
4058                                 return -2;
4059
4060                         }
4061
4062                         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4063
4064                         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4065                                         ioc->name, diag0val));
4066                 }
4067
4068                 if (ioc->debug_level & MPT_DEBUG) {
4069                         if (ioc->alt_ioc)
4070                                 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4071                         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4072                                 ioc->name, diag0val, diag1val));
4073                 }
4074                 /*
4075                  * Disable the ARM (Bug fix)
4076                  *
4077                  */
4078                 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4079                 mdelay(1);
4080
4081                 /*
4082                  * Now hit the reset bit in the Diagnostic register
4083                  * (THE BIG HAMMER!) (Clears DRWE bit).
4084                  */
4085                 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4086                 hard_reset_done = 1;
4087                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4088                                 ioc->name));
4089
4090                 /*
4091                  * Call each currently registered protocol IOC reset handler
4092                  * with pre-reset indication.
4093                  * NOTE: If we're doing _IOC_BRINGUP, there can be no
4094                  * MptResetHandlers[] registered yet.
4095                  */
4096                 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4097                         if (MptResetHandlers[cb_idx]) {
4098                                 mpt_signal_reset(cb_idx,
4099                                         ioc, MPT_IOC_PRE_RESET);
4100                                 if (ioc->alt_ioc) {
4101                                         mpt_signal_reset(cb_idx,
4102                                         ioc->alt_ioc, MPT_IOC_PRE_RESET);
4103                                 }
4104                         }
4105                 }
4106
4107                 if (ioc->cached_fw)
4108                         cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4109                 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4110                         cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4111                 else
4112                         cached_fw = NULL;
4113                 if (cached_fw) {
4114                         /* If the DownloadBoot operation fails, the
4115                          * IOC will be left unusable. This is a fatal error
4116                          * case.  _diag_reset will return < 0
4117                          */
4118                         for (count = 0; count < 30; count ++) {
4119                                 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4120                                 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4121                                         break;
4122                                 }
4123
4124                                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4125                                         ioc->name, diag0val, count));
4126                                 /* wait 1 sec */
4127                                 if (sleepFlag == CAN_SLEEP) {
4128                                         msleep (1000);
4129                                 } else {
4130                                         mdelay (1000);
4131                                 }
4132                         }
4133                         if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4134                                 printk(MYIOC_s_WARN_FMT
4135                                         "firmware downloadboot failure (%d)!\n", ioc->name, count);
4136                         }
4137
4138                 } else {
4139                         /* Wait for FW to reload and for board
4140                          * to go to the READY state.
4141                          * Maximum wait is 60 seconds.
4142                          * If fail, no error will check again
4143                          * with calling program.
4144                          */
4145                         for (count = 0; count < 60; count ++) {
4146                                 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4147                                 doorbell &= MPI_IOC_STATE_MASK;
4148
4149                                 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4150                                     "looking for READY STATE: doorbell=%x"
4151                                     " count=%d\n", ioc->name, doorbell, count));
4152
4153                                 if (doorbell == MPI_IOC_STATE_READY) {
4154                                         break;
4155                                 }
4156
4157                                 /* wait 1 sec */
4158                                 if (sleepFlag == CAN_SLEEP) {
4159                                         msleep (1000);
4160                                 } else {
4161                                         mdelay (1000);
4162                                 }
4163                         }
4164
4165                         if (doorbell != MPI_IOC_STATE_READY)
4166                                 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4167                                     "after reset! IocState=%x", ioc->name,
4168                                     doorbell);
4169                 }
4170         }
4171
4172         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4173         if (ioc->debug_level & MPT_DEBUG) {
4174                 if (ioc->alt_ioc)
4175                         diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4176                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4177                         ioc->name, diag0val, diag1val));
4178         }
4179
4180         /* Clear RESET_HISTORY bit!  Place board in the
4181          * diagnostic mode to update the diag register.
4182          */
4183         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4184         count = 0;
4185         while ((diag0val & MPI_DIAG_DRWE) == 0) {
4186                 /* Write magic sequence to WriteSequence register
4187                  * Loop until in diagnostic mode
4188                  */
4189                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4190                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4191                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4192                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4193                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4194                 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4195
4196                 /* wait 100 msec */
4197                 if (sleepFlag == CAN_SLEEP) {
4198                         msleep (100);
4199                 } else {
4200                         mdelay (100);
4201                 }
4202
4203                 count++;
4204                 if (count > 20) {
4205                         printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4206                                         ioc->name, diag0val);
4207                         break;
4208                 }
4209                 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4210         }
4211         diag0val &= ~MPI_DIAG_RESET_HISTORY;
4212         CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4213         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4214         if (diag0val & MPI_DIAG_RESET_HISTORY) {
4215                 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4216                                 ioc->name);
4217         }
4218
4219         /* Disable Diagnostic Mode
4220          */
4221         CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4222
4223         /* Check FW reload status flags.
4224          */
4225         diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4226         if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4227                 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4228                                 ioc->name, diag0val);
4229                 return -3;
4230         }
4231
4232         if (ioc->debug_level & MPT_DEBUG) {
4233                 if (ioc->alt_ioc)
4234                         diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4235                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4236                         ioc->name, diag0val, diag1val));
4237         }
4238
4239         /*
4240          * Reset flag that says we've enabled event notification
4241          */
4242         ioc->facts.EventState = 0;
4243
4244         if (ioc->alt_ioc)
4245                 ioc->alt_ioc->facts.EventState = 0;
4246
4247         return hard_reset_done;
4248 }
4249
4250 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4251 /**
4252  *      SendIocReset - Send IOCReset request to MPT adapter.
4253  *      @ioc: Pointer to MPT_ADAPTER structure
4254  *      @reset_type: reset type, expected values are
4255  *      %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4256  *      @sleepFlag: Specifies whether the process can sleep
4257  *
4258  *      Send IOCReset request to the MPT adapter.
4259  *
4260  *      Returns 0 for success, non-zero for failure.
4261  */
4262 static int
4263 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4264 {
4265         int r;
4266         u32 state;
4267         int cntdn, count;
4268
4269         drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4270                         ioc->name, reset_type));
4271         CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4272         if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4273                 return r;
4274
4275         /* FW ACK'd request, wait for READY state
4276          */
4277         count = 0;
4278         cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15;    /* 15 seconds */
4279
4280         while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4281                 cntdn--;
4282                 count++;
4283                 if (!cntdn) {
4284                         if (sleepFlag != CAN_SLEEP)
4285                                 count *= 10;
4286
4287                         printk(MYIOC_s_ERR_FMT
4288                             "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4289                             ioc->name, state, (int)((count+5)/HZ));
4290                         return -ETIME;
4291                 }
4292
4293                 if (sleepFlag == CAN_SLEEP) {
4294                         msleep(1);
4295                 } else {
4296                         mdelay (1);     /* 1 msec delay */
4297                 }
4298         }
4299
4300         /* TODO!
4301          *  Cleanup all event stuff for this IOC; re-issue EventNotification
4302          *  request if needed.
4303          */
4304         if (ioc->facts.Function)
4305                 ioc->facts.EventState = 0;
4306
4307         return 0;
4308 }
4309
4310 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4311 /**
4312  *      initChainBuffers - Allocate memory for and initialize chain buffers
4313  *      @ioc: Pointer to MPT_ADAPTER structure
4314  *
4315  *      Allocates memory for and initializes chain buffers,
4316  *      chain buffer control arrays and spinlock.
4317  */
4318 static int
4319 initChainBuffers(MPT_ADAPTER *ioc)
4320 {
4321         u8              *mem;
4322         int             sz, ii, num_chain;
4323         int             scale, num_sge, numSGE;
4324
4325         /* ReqToChain size must equal the req_depth
4326          * index = req_idx
4327          */
4328         if (ioc->ReqToChain == NULL) {
4329                 sz = ioc->req_depth * sizeof(int);
4330                 mem = kmalloc(sz, GFP_ATOMIC);
4331                 if (mem == NULL)
4332                         return -1;
4333
4334                 ioc->ReqToChain = (int *) mem;
4335                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc  @ %p, sz=%d bytes\n",
4336                                 ioc->name, mem, sz));
4337                 mem = kmalloc(sz, GFP_ATOMIC);
4338                 if (mem == NULL)
4339                         return -1;
4340
4341                 ioc->RequestNB = (int *) mem;
4342                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc  @ %p, sz=%d bytes\n",
4343                                 ioc->name, mem, sz));
4344         }
4345         for (ii = 0; ii < ioc->req_depth; ii++) {
4346                 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4347         }
4348
4349         /* ChainToChain size must equal the total number
4350          * of chain buffers to be allocated.
4351          * index = chain_idx
4352          *
4353          * Calculate the number of chain buffers needed(plus 1) per I/O
4354          * then multiply the maximum number of simultaneous cmds
4355          *
4356          * num_sge = num sge in request frame + last chain buffer
4357          * scale = num sge per chain buffer if no chain element
4358          */
4359         scale = ioc->req_sz / ioc->SGE_size;
4360         if (ioc->sg_addr_size == sizeof(u64))
4361                 num_sge =  scale + (ioc->req_sz - 60) / ioc->SGE_size;
4362         else
4363                 num_sge =  1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4364
4365         if (ioc->sg_addr_size == sizeof(u64)) {
4366                 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4367                         (ioc->req_sz - 60) / ioc->SGE_size;
4368         } else {
4369                 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4370                     scale + (ioc->req_sz - 64) / ioc->SGE_size;
4371         }
4372         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4373                 ioc->name, num_sge, numSGE));
4374
4375         if (ioc->bus_type == FC) {
4376                 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4377                         numSGE = MPT_SCSI_FC_SG_DEPTH;
4378         } else {
4379                 if (numSGE > MPT_SCSI_SG_DEPTH)
4380                         numSGE = MPT_SCSI_SG_DEPTH;
4381         }
4382
4383         num_chain = 1;
4384         while (numSGE - num_sge > 0) {
4385                 num_chain++;
4386                 num_sge += (scale - 1);
4387         }
4388         num_chain++;
4389
4390         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4391                 ioc->name, numSGE, num_sge, num_chain));
4392
4393         if (ioc->bus_type == SPI)
4394                 num_chain *= MPT_SCSI_CAN_QUEUE;
4395         else if (ioc->bus_type == SAS)
4396                 num_chain *= MPT_SAS_CAN_QUEUE;
4397         else
4398                 num_chain *= MPT_FC_CAN_QUEUE;
4399
4400         ioc->num_chain = num_chain;
4401
4402         sz = num_chain * sizeof(int);
4403         if (ioc->ChainToChain == NULL) {
4404                 mem = kmalloc(sz, GFP_ATOMIC);
4405                 if (mem == NULL)
4406                         return -1;
4407
4408                 ioc->ChainToChain = (int *) mem;
4409                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4410                                 ioc->name, mem, sz));
4411         } else {
4412                 mem = (u8 *) ioc->ChainToChain;
4413         }
4414         memset(mem, 0xFF, sz);
4415         return num_chain;
4416 }
4417
4418 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4419 /**
4420  *      PrimeIocFifos - Initialize IOC request and reply FIFOs.
4421  *      @ioc: Pointer to MPT_ADAPTER structure
4422  *
4423  *      This routine allocates memory for the MPT reply and request frame
4424  *      pools (if necessary), and primes the IOC reply FIFO with
4425  *      reply frames.
4426  *
4427  *      Returns 0 for success, non-zero for failure.
4428  */
4429 static int
4430 PrimeIocFifos(MPT_ADAPTER *ioc)
4431 {
4432         MPT_FRAME_HDR *mf;
4433         unsigned long flags;
4434         dma_addr_t alloc_dma;
4435         u8 *mem;
4436         int i, reply_sz, sz, total_size, num_chain;
4437         u64     dma_mask;
4438
4439         dma_mask = 0;
4440
4441         /*  Prime reply FIFO...  */
4442
4443         if (ioc->reply_frames == NULL) {
4444                 if ( (num_chain = initChainBuffers(ioc)) < 0)
4445                         return -1;
4446                 /*
4447                  * 1078 errata workaround for the 36GB limitation
4448                  */
4449                 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4450                     ioc->dma_mask > DMA_BIT_MASK(35)) {
4451                         if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4452                             && !pci_set_consistent_dma_mask(ioc->pcidev,
4453                             DMA_BIT_MASK(32))) {
4454                                 dma_mask = DMA_BIT_MASK(35);
4455                                 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4456                                     "setting 35 bit addressing for "
4457                                     "Request/Reply/Chain and Sense Buffers\n",
4458                                     ioc->name));
4459                         } else {
4460                                 /*Reseting DMA mask to 64 bit*/
4461                                 pci_set_dma_mask(ioc->pcidev,
4462                                         DMA_BIT_MASK(64));
4463                                 pci_set_consistent_dma_mask(ioc->pcidev,
4464                                         DMA_BIT_MASK(64));
4465
4466                                 printk(MYIOC_s_ERR_FMT
4467                                     "failed setting 35 bit addressing for "
4468                                     "Request/Reply/Chain and Sense Buffers\n",
4469                                     ioc->name);
4470                                 return -1;
4471                         }
4472                 }
4473
4474                 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4475                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4476                                 ioc->name, ioc->reply_sz, ioc->reply_depth));
4477                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4478                                 ioc->name, reply_sz, reply_sz));
4479
4480                 sz = (ioc->req_sz * ioc->req_depth);
4481                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4482                                 ioc->name, ioc->req_sz, ioc->req_depth));
4483                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4484                                 ioc->name, sz, sz));
4485                 total_size += sz;
4486
4487                 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4488                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4489                                 ioc->name, ioc->req_sz, num_chain));
4490                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4491                                 ioc->name, sz, sz, num_chain));
4492
4493                 total_size += sz;
4494                 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
4495                 if (mem == NULL) {
4496                         printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4497                                 ioc->name);
4498                         goto out_fail;
4499                 }
4500
4501                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4502                                 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4503
4504                 memset(mem, 0, total_size);
4505                 ioc->alloc_total += total_size;
4506                 ioc->alloc = mem;
4507                 ioc->alloc_dma = alloc_dma;
4508                 ioc->alloc_sz = total_size;
4509                 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4510                 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4511
4512                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4513                         ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4514
4515                 alloc_dma += reply_sz;
4516                 mem += reply_sz;
4517
4518                 /*  Request FIFO - WE manage this!  */
4519
4520                 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4521                 ioc->req_frames_dma = alloc_dma;
4522
4523                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4524                                 ioc->name, mem, (void *)(ulong)alloc_dma));
4525
4526                 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4527
4528                 for (i = 0; i < ioc->req_depth; i++) {
4529                         alloc_dma += ioc->req_sz;
4530                         mem += ioc->req_sz;
4531                 }
4532
4533                 ioc->ChainBuffer = mem;
4534                 ioc->ChainBufferDMA = alloc_dma;
4535
4536                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4537                         ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4538
4539                 /* Initialize the free chain Q.
4540                 */
4541
4542                 INIT_LIST_HEAD(&ioc->FreeChainQ);
4543
4544                 /* Post the chain buffers to the FreeChainQ.
4545                 */
4546                 mem = (u8 *)ioc->ChainBuffer;
4547                 for (i=0; i < num_chain; i++) {
4548                         mf = (MPT_FRAME_HDR *) mem;
4549                         list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4550                         mem += ioc->req_sz;
4551                 }
4552
4553                 /* Initialize Request frames linked list
4554                  */
4555                 alloc_dma = ioc->req_frames_dma;
4556                 mem = (u8 *) ioc->req_frames;
4557
4558                 spin_lock_irqsave(&ioc->FreeQlock, flags);
4559                 INIT_LIST_HEAD(&ioc->FreeQ);
4560                 for (i = 0; i < ioc->req_depth; i++) {
4561                         mf = (MPT_FRAME_HDR *) mem;
4562
4563                         /*  Queue REQUESTs *internally*!  */
4564                         list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4565
4566                         mem += ioc->req_sz;
4567                 }
4568                 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4569
4570                 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4571                 ioc->sense_buf_pool =
4572                         pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
4573                 if (ioc->sense_buf_pool == NULL) {
4574                         printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4575                                 ioc->name);
4576                         goto out_fail;
4577                 }
4578
4579                 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4580                 ioc->alloc_total += sz;
4581                 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4582                         ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4583
4584         }
4585
4586         /* Post Reply frames to FIFO
4587          */
4588         alloc_dma = ioc->alloc_dma;
4589         dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4590                 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4591
4592         for (i = 0; i < ioc->reply_depth; i++) {
4593                 /*  Write each address to the IOC!  */
4594                 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4595                 alloc_dma += ioc->reply_sz;
4596         }
4597
4598         if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4599             ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4600             ioc->dma_mask))
4601                 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4602                     "restoring 64 bit addressing\n", ioc->name));
4603
4604         return 0;
4605
4606 out_fail:
4607
4608         if (ioc->alloc != NULL) {
4609                 sz = ioc->alloc_sz;
4610                 pci_free_consistent(ioc->pcidev,
4611                                 sz,
4612                                 ioc->alloc, ioc->alloc_dma);
4613                 ioc->reply_frames = NULL;
4614                 ioc->req_frames = NULL;
4615                 ioc->alloc_total -= sz;
4616         }
4617         if (ioc->sense_buf_pool != NULL) {
4618                 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4619                 pci_free_consistent(ioc->pcidev,
4620                                 sz,
4621                                 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
4622                 ioc->sense_buf_pool = NULL;
4623         }
4624
4625         if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4626             DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4627             DMA_BIT_MASK(64)))
4628                 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4629                     "restoring 64 bit addressing\n", ioc->name));
4630
4631         return -1;
4632 }
4633
4634 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4635 /**
4636  *      mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4637  *      from IOC via doorbell handshake method.
4638  *      @ioc: Pointer to MPT_ADAPTER structure
4639  *      @reqBytes: Size of the request in bytes
4640  *      @req: Pointer to MPT request frame
4641  *      @replyBytes: Expected size of the reply in bytes
4642  *      @u16reply: Pointer to area where reply should be written
4643  *      @maxwait: Max wait time for a reply (in seconds)
4644  *      @sleepFlag: Specifies whether the process can sleep
4645  *
4646  *      NOTES: It is the callers responsibility to byte-swap fields in the
4647  *      request which are greater than 1 byte in size.  It is also the
4648  *      callers responsibility to byte-swap response fields which are
4649  *      greater than 1 byte in size.
4650  *
4651  *      Returns 0 for success, non-zero for failure.
4652  */
4653 static int
4654 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4655                 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4656 {
4657         MPIDefaultReply_t *mptReply;
4658         int failcnt = 0;
4659         int t;
4660
4661         /*
4662          * Get ready to cache a handshake reply
4663          */
4664         ioc->hs_reply_idx = 0;
4665         mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4666         mptReply->MsgLength = 0;
4667
4668         /*
4669          * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4670          * then tell IOC that we want to handshake a request of N words.
4671          * (WRITE u32val to Doorbell reg).
4672          */
4673         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4674         CHIPREG_WRITE32(&ioc->chip->Doorbell,
4675                         ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4676                          ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4677
4678         /*
4679          * Wait for IOC's doorbell handshake int
4680          */
4681         if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4682                 failcnt++;
4683
4684         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4685                         ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4686
4687         /* Read doorbell and check for active bit */
4688         if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4689                         return -1;
4690
4691         /*
4692          * Clear doorbell int (WRITE 0 to IntStatus reg),
4693          * then wait for IOC to ACKnowledge that it's ready for
4694          * our handshake request.
4695          */
4696         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4697         if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4698                 failcnt++;
4699
4700         if (!failcnt) {
4701                 int      ii;
4702                 u8      *req_as_bytes = (u8 *) req;
4703
4704                 /*
4705                  * Stuff request words via doorbell handshake,
4706                  * with ACK from IOC for each.
4707                  */
4708                 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4709                         u32 word = ((req_as_bytes[(ii*4) + 0] <<  0) |
4710                                     (req_as_bytes[(ii*4) + 1] <<  8) |
4711                                     (req_as_bytes[(ii*4) + 2] << 16) |
4712                                     (req_as_bytes[(ii*4) + 3] << 24));
4713
4714                         CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4715                         if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4716                                 failcnt++;
4717                 }
4718
4719                 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4720                 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4721
4722                 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4723                                 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4724
4725                 /*
4726                  * Wait for completion of doorbell handshake reply from the IOC
4727                  */
4728                 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4729                         failcnt++;
4730
4731                 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4732                                 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4733
4734                 /*
4735                  * Copy out the cached reply...
4736                  */
4737                 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4738                         u16reply[ii] = ioc->hs_reply[ii];
4739         } else {
4740                 return -99;
4741         }
4742
4743         return -failcnt;
4744 }
4745
4746 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4747 /**
4748  *      WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4749  *      @ioc: Pointer to MPT_ADAPTER structure
4750  *      @howlong: How long to wait (in seconds)
4751  *      @sleepFlag: Specifies whether the process can sleep
4752  *
4753  *      This routine waits (up to ~2 seconds max) for IOC doorbell
4754  *      handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4755  *      bit in its IntStatus register being clear.
4756  *
4757  *      Returns a negative value on failure, else wait loop count.
4758  */
4759 static int
4760 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4761 {
4762         int cntdn;
4763         int count = 0;
4764         u32 intstat=0;
4765
4766         cntdn = 1000 * howlong;
4767
4768         if (sleepFlag == CAN_SLEEP) {
4769                 while (--cntdn) {
4770                         msleep (1);
4771                         intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4772                         if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4773                                 break;
4774                         count++;
4775                 }
4776         } else {
4777                 while (--cntdn) {
4778                         udelay (1000);
4779                         intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4780                         if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4781                                 break;
4782                         count++;
4783                 }
4784         }
4785
4786         if (cntdn) {
4787                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4788                                 ioc->name, count));
4789                 return count;
4790         }
4791
4792         printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4793                         ioc->name, count, intstat);
4794         return -1;
4795 }
4796
4797 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4798 /**
4799  *      WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4800  *      @ioc: Pointer to MPT_ADAPTER structure
4801  *      @howlong: How long to wait (in seconds)
4802  *      @sleepFlag: Specifies whether the process can sleep
4803  *
4804  *      This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4805  *      (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4806  *
4807  *      Returns a negative value on failure, else wait loop count.
4808  */
4809 static int
4810 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4811 {
4812         int cntdn;
4813         int count = 0;
4814         u32 intstat=0;
4815
4816         cntdn = 1000 * howlong;
4817         if (sleepFlag == CAN_SLEEP) {
4818                 while (--cntdn) {
4819                         intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4820                         if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4821                                 break;
4822                         msleep(1);
4823                         count++;
4824                 }
4825         } else {
4826                 while (--cntdn) {
4827                         intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4828                         if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4829                                 break;
4830                         udelay (1000);
4831                         count++;
4832                 }
4833         }
4834
4835         if (cntdn) {
4836                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4837                                 ioc->name, count, howlong));
4838                 return count;
4839         }
4840
4841         printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4842                         ioc->name, count, intstat);
4843         return -1;
4844 }
4845
4846 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4847 /**
4848  *      WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4849  *      @ioc: Pointer to MPT_ADAPTER structure
4850  *      @howlong: How long to wait (in seconds)
4851  *      @sleepFlag: Specifies whether the process can sleep
4852  *
4853  *      This routine polls the IOC for a handshake reply, 16 bits at a time.
4854  *      Reply is cached to IOC private area large enough to hold a maximum
4855  *      of 128 bytes of reply data.
4856  *
4857  *      Returns a negative value on failure, else size of reply in WORDS.
4858  */
4859 static int
4860 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4861 {
4862         int u16cnt = 0;
4863         int failcnt = 0;
4864         int t;
4865         u16 *hs_reply = ioc->hs_reply;
4866         volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4867         u16 hword;
4868
4869         hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4870
4871         /*
4872          * Get first two u16's so we can look at IOC's intended reply MsgLength
4873          */
4874         u16cnt=0;
4875         if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4876                 failcnt++;
4877         } else {
4878                 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4879                 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4880                 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4881                         failcnt++;
4882                 else {
4883                         hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4884                         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4885                 }
4886         }
4887
4888         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4889                         ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4890                         failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4891
4892         /*
4893          * If no error (and IOC said MsgLength is > 0), piece together
4894          * reply 16 bits at a time.
4895          */
4896         for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4897                 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4898                         failcnt++;
4899                 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4900                 /* don't overflow our IOC hs_reply[] buffer! */
4901                 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4902                         hs_reply[u16cnt] = hword;
4903                 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4904         }
4905
4906         if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4907                 failcnt++;
4908         CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4909
4910         if (failcnt) {
4911                 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4912                                 ioc->name);
4913                 return -failcnt;
4914         }
4915 #if 0
4916         else if (u16cnt != (2 * mptReply->MsgLength)) {
4917                 return -101;
4918         }
4919         else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4920                 return -102;
4921         }
4922 #endif
4923
4924         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4925         DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4926
4927         dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4928                         ioc->name, t, u16cnt/2));
4929         return u16cnt/2;
4930 }
4931
4932 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4933 /**
4934  *      GetLanConfigPages - Fetch LANConfig pages.
4935  *      @ioc: Pointer to MPT_ADAPTER structure
4936  *
4937  *      Return: 0 for success
4938  *      -ENOMEM if no memory available
4939  *              -EPERM if not allowed due to ISR context
4940  *              -EAGAIN if no msg frames currently available
4941  *              -EFAULT for non-successful reply or no reply (timeout)
4942  */
4943 static int
4944 GetLanConfigPages(MPT_ADAPTER *ioc)
4945 {
4946         ConfigPageHeader_t       hdr;
4947         CONFIGPARMS              cfg;
4948         LANPage0_t              *ppage0_alloc;
4949         dma_addr_t               page0_dma;
4950         LANPage1_t              *ppage1_alloc;
4951         dma_addr_t               page1_dma;
4952         int                      rc = 0;
4953         int                      data_sz;
4954         int                      copy_sz;
4955
4956         /* Get LAN Page 0 header */
4957         hdr.PageVersion = 0;
4958         hdr.PageLength = 0;
4959         hdr.PageNumber = 0;
4960         hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4961         cfg.cfghdr.hdr = &hdr;
4962         cfg.physAddr = -1;
4963         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4964         cfg.dir = 0;
4965         cfg.pageAddr = 0;
4966         cfg.timeout = 0;
4967
4968         if ((rc = mpt_config(ioc, &cfg)) != 0)
4969                 return rc;
4970
4971         if (hdr.PageLength > 0) {
4972                 data_sz = hdr.PageLength * 4;
4973                 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4974                 rc = -ENOMEM;
4975                 if (ppage0_alloc) {
4976                         memset((u8 *)ppage0_alloc, 0, data_sz);
4977                         cfg.physAddr = page0_dma;
4978                         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4979
4980                         if ((rc = mpt_config(ioc, &cfg)) == 0) {
4981                                 /* save the data */
4982                                 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4983                                 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4984
4985                         }
4986
4987                         pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4988
4989                         /* FIXME!
4990                          *      Normalize endianness of structure data,
4991                          *      by byte-swapping all > 1 byte fields!
4992                          */
4993
4994                 }
4995
4996                 if (rc)
4997                         return rc;
4998         }
4999
5000         /* Get LAN Page 1 header */
5001         hdr.PageVersion = 0;
5002         hdr.PageLength = 0;
5003         hdr.PageNumber = 1;
5004         hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5005         cfg.cfghdr.hdr = &hdr;
5006         cfg.physAddr = -1;
5007         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5008         cfg.dir = 0;
5009         cfg.pageAddr = 0;
5010
5011         if ((rc = mpt_config(ioc, &cfg)) != 0)
5012                 return rc;
5013
5014         if (hdr.PageLength == 0)
5015                 return 0;
5016
5017         data_sz = hdr.PageLength * 4;
5018         rc = -ENOMEM;
5019         ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5020         if (ppage1_alloc) {
5021                 memset((u8 *)ppage1_alloc, 0, data_sz);
5022                 cfg.physAddr = page1_dma;
5023                 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5024
5025                 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5026                         /* save the data */
5027                         copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5028                         memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5029                 }
5030
5031                 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5032
5033                 /* FIXME!
5034                  *      Normalize endianness of structure data,
5035                  *      by byte-swapping all > 1 byte fields!
5036                  */
5037
5038         }
5039
5040         return rc;
5041 }
5042
5043 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5044 /**
5045  *      mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5046  *      @ioc: Pointer to MPT_ADAPTER structure
5047  *      @persist_opcode: see below
5048  *
5049  *      MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
5050  *              devices not currently present.
5051  *      MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
5052  *
5053  *      NOTE: Don't use not this function during interrupt time.
5054  *
5055  *      Returns 0 for success, non-zero error
5056  */
5057
5058 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5059 int
5060 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5061 {
5062         SasIoUnitControlRequest_t       *sasIoUnitCntrReq;
5063         SasIoUnitControlReply_t         *sasIoUnitCntrReply;
5064         MPT_FRAME_HDR                   *mf = NULL;
5065         MPIHeader_t                     *mpi_hdr;
5066         int                             ret = 0;
5067         unsigned long                   timeleft;
5068
5069         mutex_lock(&ioc->mptbase_cmds.mutex);
5070
5071         /* init the internal cmd struct */
5072         memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5073         INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5074
5075         /* insure garbage is not sent to fw */
5076         switch(persist_opcode) {
5077
5078         case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5079         case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5080                 break;
5081
5082         default:
5083                 ret = -1;
5084                 goto out;
5085         }
5086
5087         printk(KERN_DEBUG  "%s: persist_opcode=%x\n",
5088                 __func__, persist_opcode);
5089
5090         /* Get a MF for this command.
5091          */
5092         if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5093                 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5094                 ret = -1;
5095                 goto out;
5096         }
5097
5098         mpi_hdr = (MPIHeader_t *) mf;
5099         sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5100         memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5101         sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5102         sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5103         sasIoUnitCntrReq->Operation = persist_opcode;
5104
5105         mpt_put_msg_frame(mpt_base_index, ioc, mf);
5106         timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5107         if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5108                 ret = -ETIME;
5109                 printk(KERN_DEBUG "%s: failed\n", __func__);
5110                 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5111                         goto out;
5112                 if (!timeleft) {
5113                         printk(MYIOC_s_WARN_FMT
5114                                "Issuing Reset from %s!!, doorbell=0x%08x\n",
5115                                ioc->name, __func__, mpt_GetIocState(ioc, 0));
5116                         mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5117                         mpt_free_msg_frame(ioc, mf);
5118                 }
5119                 goto out;
5120         }
5121
5122         if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5123                 ret = -1;
5124                 goto out;
5125         }
5126
5127         sasIoUnitCntrReply =
5128             (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5129         if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5130                 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5131                     __func__, sasIoUnitCntrReply->IOCStatus,
5132                     sasIoUnitCntrReply->IOCLogInfo);
5133                 printk(KERN_DEBUG "%s: failed\n", __func__);
5134                 ret = -1;
5135         } else
5136                 printk(KERN_DEBUG "%s: success\n", __func__);
5137  out:
5138
5139         CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5140         mutex_unlock(&ioc->mptbase_cmds.mutex);
5141         return ret;
5142 }
5143
5144 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5145
5146 static void
5147 mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5148     MpiEventDataRaid_t * pRaidEventData)
5149 {
5150         int     volume;
5151         int     reason;
5152         int     disk;
5153         int     status;
5154         int     flags;
5155         int     state;
5156
5157         volume  = pRaidEventData->VolumeID;
5158         reason  = pRaidEventData->ReasonCode;
5159         disk    = pRaidEventData->PhysDiskNum;
5160         status  = le32_to_cpu(pRaidEventData->SettingsStatus);
5161         flags   = (status >> 0) & 0xff;
5162         state   = (status >> 8) & 0xff;
5163
5164         if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5165                 return;
5166         }
5167
5168         if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5169              reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5170             (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5171                 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5172                         ioc->name, disk, volume);
5173         } else {
5174                 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5175                         ioc->name, volume);
5176         }
5177
5178         switch(reason) {
5179         case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5180                 printk(MYIOC_s_INFO_FMT "  volume has been created\n",
5181                         ioc->name);
5182                 break;
5183
5184         case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5185
5186                 printk(MYIOC_s_INFO_FMT "  volume has been deleted\n",
5187                         ioc->name);
5188                 break;
5189
5190         case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5191                 printk(MYIOC_s_INFO_FMT "  volume settings have been changed\n",
5192                         ioc->name);
5193                 break;
5194
5195         case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5196                 printk(MYIOC_s_INFO_FMT "  volume is now %s%s%s%s\n",
5197                         ioc->name,
5198                         state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5199                          ? "optimal"
5200                          : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5201                           ? "degraded"
5202                           : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5203                            ? "failed"
5204                            : "state unknown",
5205                         flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5206                          ? ", enabled" : "",
5207                         flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5208                          ? ", quiesced" : "",
5209                         flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5210                          ? ", resync in progress" : "" );
5211                 break;
5212
5213         case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5214                 printk(MYIOC_s_INFO_FMT "  volume membership of PhysDisk %d has changed\n",
5215                         ioc->name, disk);
5216                 break;
5217
5218         case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5219                 printk(MYIOC_s_INFO_FMT "  PhysDisk has been created\n",
5220                         ioc->name);
5221                 break;
5222
5223         case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5224                 printk(MYIOC_s_INFO_FMT "  PhysDisk has been deleted\n",
5225                         ioc->name);
5226                 break;
5227
5228         case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5229                 printk(MYIOC_s_INFO_FMT "  PhysDisk settings have been changed\n",
5230                         ioc->name);
5231                 break;
5232
5233         case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5234                 printk(MYIOC_s_INFO_FMT "  PhysDisk is now %s%s%s\n",
5235                         ioc->name,
5236                         state == MPI_PHYSDISK0_STATUS_ONLINE
5237                          ? "online"
5238                          : state == MPI_PHYSDISK0_STATUS_MISSING
5239                           ? "missing"
5240                           : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5241                            ? "not compatible"
5242                            : state == MPI_PHYSDISK0_STATUS_FAILED
5243                             ? "failed"
5244                             : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5245                              ? "initializing"
5246                              : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5247                               ? "offline requested"
5248                               : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5249                                ? "failed requested"
5250                                : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5251                                 ? "offline"
5252                                 : "state unknown",
5253                         flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5254                          ? ", out of sync" : "",
5255                         flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5256                          ? ", quiesced" : "" );
5257                 break;
5258
5259         case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5260                 printk(MYIOC_s_INFO_FMT "  Domain Validation needed for PhysDisk %d\n",
5261                         ioc->name, disk);
5262                 break;
5263
5264         case MPI_EVENT_RAID_RC_SMART_DATA:
5265                 printk(MYIOC_s_INFO_FMT "  SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5266                         ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5267                 break;
5268
5269         case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5270                 printk(MYIOC_s_INFO_FMT "  replacement of PhysDisk %d has started\n",
5271                         ioc->name, disk);
5272                 break;
5273         }
5274 }
5275
5276 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5277 /**
5278  *      GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5279  *      @ioc: Pointer to MPT_ADAPTER structure
5280  *
5281  *      Returns: 0 for success
5282  *      -ENOMEM if no memory available
5283  *              -EPERM if not allowed due to ISR context
5284  *              -EAGAIN if no msg frames currently available
5285  *              -EFAULT for non-successful reply or no reply (timeout)
5286  */
5287 static int
5288 GetIoUnitPage2(MPT_ADAPTER *ioc)
5289 {
5290         ConfigPageHeader_t       hdr;
5291         CONFIGPARMS              cfg;
5292         IOUnitPage2_t           *ppage_alloc;
5293         dma_addr_t               page_dma;
5294         int                      data_sz;
5295         int                      rc;
5296
5297         /* Get the page header */
5298         hdr.PageVersion = 0;
5299         hdr.PageLength = 0;
5300         hdr.PageNumber = 2;
5301         hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5302         cfg.cfghdr.hdr = &hdr;
5303         cfg.physAddr = -1;
5304         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5305         cfg.dir = 0;
5306         cfg.pageAddr = 0;
5307         cfg.timeout = 0;
5308
5309         if ((rc = mpt_config(ioc, &cfg)) != 0)
5310                 return rc;
5311
5312         if (hdr.PageLength == 0)
5313                 return 0;
5314
5315         /* Read the config page */
5316         data_sz = hdr.PageLength * 4;
5317         rc = -ENOMEM;
5318         ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5319         if (ppage_alloc) {
5320                 memset((u8 *)ppage_alloc, 0, data_sz);
5321                 cfg.physAddr = page_dma;
5322                 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5323
5324                 /* If Good, save data */
5325                 if ((rc = mpt_config(ioc, &cfg)) == 0)
5326                         ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5327
5328                 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5329         }
5330
5331         return rc;
5332 }
5333
5334 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5335 /**
5336  *      mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5337  *      @ioc: Pointer to a Adapter Strucutre
5338  *      @portnum: IOC port number
5339  *
5340  *      Return: -EFAULT if read of config page header fails
5341  *                      or if no nvram
5342  *      If read of SCSI Port Page 0 fails,
5343  *              NVRAM = MPT_HOST_NVRAM_INVALID  (0xFFFFFFFF)
5344  *              Adapter settings: async, narrow
5345  *              Return 1
5346  *      If read of SCSI Port Page 2 fails,
5347  *              Adapter settings valid
5348  *              NVRAM = MPT_HOST_NVRAM_INVALID  (0xFFFFFFFF)
5349  *              Return 1
5350  *      Else
5351  *              Both valid
5352  *              Return 0
5353  *      CHECK - what type of locking mechanisms should be used????
5354  */
5355 static int
5356 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5357 {
5358         u8                      *pbuf;
5359         dma_addr_t               buf_dma;
5360         CONFIGPARMS              cfg;
5361         ConfigPageHeader_t       header;
5362         int                      ii;
5363         int                      data, rc = 0;
5364
5365         /* Allocate memory
5366          */
5367         if (!ioc->spi_data.nvram) {
5368                 int      sz;
5369                 u8      *mem;
5370                 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5371                 mem = kmalloc(sz, GFP_ATOMIC);
5372                 if (mem == NULL)
5373                         return -EFAULT;
5374
5375                 ioc->spi_data.nvram = (int *) mem;
5376
5377                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5378                         ioc->name, ioc->spi_data.nvram, sz));
5379         }
5380
5381         /* Invalidate NVRAM information
5382          */
5383         for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5384                 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5385         }
5386
5387         /* Read SPP0 header, allocate memory, then read page.
5388          */
5389         header.PageVersion = 0;
5390         header.PageLength = 0;
5391         header.PageNumber = 0;
5392         header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5393         cfg.cfghdr.hdr = &header;
5394         cfg.physAddr = -1;
5395         cfg.pageAddr = portnum;
5396         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5397         cfg.dir = 0;
5398         cfg.timeout = 0;        /* use default */
5399         if (mpt_config(ioc, &cfg) != 0)
5400                  return -EFAULT;
5401
5402         if (header.PageLength > 0) {
5403                 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5404                 if (pbuf) {
5405                         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5406                         cfg.physAddr = buf_dma;
5407                         if (mpt_config(ioc, &cfg) != 0) {
5408                                 ioc->spi_data.maxBusWidth = MPT_NARROW;
5409                                 ioc->spi_data.maxSyncOffset = 0;
5410                                 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5411                                 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5412                                 rc = 1;
5413                                 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5414                                         "Unable to read PortPage0 minSyncFactor=%x\n",
5415                                         ioc->name, ioc->spi_data.minSyncFactor));
5416                         } else {
5417                                 /* Save the Port Page 0 data
5418                                  */
5419                                 SCSIPortPage0_t  *pPP0 = (SCSIPortPage0_t  *) pbuf;
5420                                 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5421                                 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5422
5423                                 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5424                                         ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5425                                         ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5426                                                 "noQas due to Capabilities=%x\n",
5427                                                 ioc->name, pPP0->Capabilities));
5428                                 }
5429                                 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5430                                 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5431                                 if (data) {
5432                                         ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5433                                         data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5434                                         ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5435                                         ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5436                                                 "PortPage0 minSyncFactor=%x\n",
5437                                                 ioc->name, ioc->spi_data.minSyncFactor));
5438                                 } else {
5439                                         ioc->spi_data.maxSyncOffset = 0;
5440                                         ioc->spi_data.minSyncFactor = MPT_ASYNC;
5441                                 }
5442
5443                                 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5444
5445                                 /* Update the minSyncFactor based on bus type.
5446                                  */
5447                                 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5448                                         (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE))  {
5449
5450                                         if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5451                                                 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5452                                                 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5453                                                         "HVD or SE detected, minSyncFactor=%x\n",
5454                                                         ioc->name, ioc->spi_data.minSyncFactor));
5455                                         }
5456                                 }
5457                         }
5458                         if (pbuf) {
5459                                 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5460                         }
5461                 }
5462         }
5463
5464         /* SCSI Port Page 2 - Read the header then the page.
5465          */
5466         header.PageVersion = 0;
5467         header.PageLength = 0;
5468         header.PageNumber = 2;
5469         header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5470         cfg.cfghdr.hdr = &header;
5471         cfg.physAddr = -1;
5472         cfg.pageAddr = portnum;
5473         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5474         cfg.dir = 0;
5475         if (mpt_config(ioc, &cfg) != 0)
5476                 return -EFAULT;
5477
5478         if (header.PageLength > 0) {
5479                 /* Allocate memory and read SCSI Port Page 2
5480                  */
5481                 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5482                 if (pbuf) {
5483                         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5484                         cfg.physAddr = buf_dma;
5485                         if (mpt_config(ioc, &cfg) != 0) {
5486                                 /* Nvram data is left with INVALID mark
5487                                  */
5488                                 rc = 1;
5489                         } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5490
5491                                 /* This is an ATTO adapter, read Page2 accordingly
5492                                 */
5493                                 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t  *) pbuf;
5494                                 ATTODeviceInfo_t *pdevice = NULL;
5495                                 u16 ATTOFlags;
5496
5497                                 /* Save the Port Page 2 data
5498                                  * (reformat into a 32bit quantity)
5499                                  */
5500                                 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5501                                   pdevice = &pPP2->DeviceSettings[ii];
5502                                   ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5503                                   data = 0;
5504
5505                                   /* Translate ATTO device flags to LSI format
5506                                    */
5507                                   if (ATTOFlags & ATTOFLAG_DISC)
5508                                     data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5509                                   if (ATTOFlags & ATTOFLAG_ID_ENB)
5510                                     data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5511                                   if (ATTOFlags & ATTOFLAG_LUN_ENB)
5512                                     data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5513                                   if (ATTOFlags & ATTOFLAG_TAGGED)
5514                                     data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5515                                   if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5516                                     data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5517
5518                                   data = (data << 16) | (pdevice->Period << 8) | 10;
5519                                   ioc->spi_data.nvram[ii] = data;
5520                                 }
5521                         } else {
5522                                 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t  *) pbuf;
5523                                 MpiDeviceInfo_t *pdevice = NULL;
5524
5525                                 /*
5526                                  * Save "Set to Avoid SCSI Bus Resets" flag
5527                                  */
5528                                 ioc->spi_data.bus_reset =
5529                                     (le32_to_cpu(pPP2->PortFlags) &
5530                                 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5531                                     0 : 1 ;
5532
5533                                 /* Save the Port Page 2 data
5534                                  * (reformat into a 32bit quantity)
5535                                  */
5536                                 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5537                                 ioc->spi_data.PortFlags = data;
5538                                 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5539                                         pdevice = &pPP2->DeviceSettings[ii];
5540                                         data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5541                                                 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5542                                         ioc->spi_data.nvram[ii] = data;
5543                                 }
5544                         }
5545
5546                         pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5547                 }
5548         }
5549
5550         /* Update Adapter limits with those from NVRAM
5551          * Comment: Don't need to do this. Target performance
5552          * parameters will never exceed the adapters limits.
5553          */
5554
5555         return rc;
5556 }
5557
5558 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5559 /**
5560  *      mpt_readScsiDevicePageHeaders - save version and length of SDP1
5561  *      @ioc: Pointer to a Adapter Strucutre
5562  *      @portnum: IOC port number
5563  *
5564  *      Return: -EFAULT if read of config page header fails
5565  *              or 0 if success.
5566  */
5567 static int
5568 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5569 {
5570         CONFIGPARMS              cfg;
5571         ConfigPageHeader_t       header;
5572
5573         /* Read the SCSI Device Page 1 header
5574          */
5575         header.PageVersion = 0;
5576         header.PageLength = 0;
5577         header.PageNumber = 1;
5578         header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5579         cfg.cfghdr.hdr = &header;
5580         cfg.physAddr = -1;
5581         cfg.pageAddr = portnum;
5582         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5583         cfg.dir = 0;
5584         cfg.timeout = 0;
5585         if (mpt_config(ioc, &cfg) != 0)
5586                  return -EFAULT;
5587
5588         ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5589         ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5590
5591         header.PageVersion = 0;
5592         header.PageLength = 0;
5593         header.PageNumber = 0;
5594         header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5595         if (mpt_config(ioc, &cfg) != 0)
5596                  return -EFAULT;
5597
5598         ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5599         ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5600
5601         dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5602                         ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5603
5604         dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5605                         ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5606         return 0;
5607 }
5608
5609 /**
5610  * mpt_inactive_raid_list_free - This clears this link list.
5611  * @ioc : pointer to per adapter structure
5612  **/
5613 static void
5614 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5615 {
5616         struct inactive_raid_component_info *component_info, *pNext;
5617
5618         if (list_empty(&ioc->raid_data.inactive_list))
5619                 return;
5620
5621         mutex_lock(&ioc->raid_data.inactive_list_mutex);
5622         list_for_each_entry_safe(component_info, pNext,
5623             &ioc->raid_data.inactive_list, list) {
5624                 list_del(&component_info->list);
5625                 kfree(component_info);
5626         }
5627         mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5628 }
5629
5630 /**
5631  * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5632  *
5633  * @ioc : pointer to per adapter structure
5634  * @channel : volume channel
5635  * @id : volume target id
5636  **/
5637 static void
5638 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5639 {
5640         CONFIGPARMS                     cfg;
5641         ConfigPageHeader_t              hdr;
5642         dma_addr_t                      dma_handle;
5643         pRaidVolumePage0_t              buffer = NULL;
5644         int                             i;
5645         RaidPhysDiskPage0_t             phys_disk;
5646         struct inactive_raid_component_info *component_info;
5647         int                             handle_inactive_volumes;
5648
5649         memset(&cfg, 0 , sizeof(CONFIGPARMS));
5650         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5651         hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5652         cfg.pageAddr = (channel << 8) + id;
5653         cfg.cfghdr.hdr = &hdr;
5654         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5655
5656         if (mpt_config(ioc, &cfg) != 0)
5657                 goto out;
5658
5659         if (!hdr.PageLength)
5660                 goto out;
5661
5662         buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5663             &dma_handle);
5664
5665         if (!buffer)
5666                 goto out;
5667
5668         cfg.physAddr = dma_handle;
5669         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5670
5671         if (mpt_config(ioc, &cfg) != 0)
5672                 goto out;
5673
5674         if (!buffer->NumPhysDisks)
5675                 goto out;
5676
5677         handle_inactive_volumes =
5678            (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5679            (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5680             buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5681             buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5682
5683         if (!handle_inactive_volumes)
5684                 goto out;
5685
5686         mutex_lock(&ioc->raid_data.inactive_list_mutex);
5687         for (i = 0; i < buffer->NumPhysDisks; i++) {
5688                 if(mpt_raid_phys_disk_pg0(ioc,
5689                     buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5690                         continue;
5691
5692                 if ((component_info = kmalloc(sizeof (*component_info),
5693                  GFP_KERNEL)) == NULL)
5694                         continue;
5695
5696                 component_info->volumeID = id;
5697                 component_info->volumeBus = channel;
5698                 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5699                 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5700                 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5701                 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5702
5703                 list_add_tail(&component_info->list,
5704                     &ioc->raid_data.inactive_list);
5705         }
5706         mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5707
5708  out:
5709         if (buffer)
5710                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5711                     dma_handle);
5712 }
5713
5714 /**
5715  *      mpt_raid_phys_disk_pg0 - returns phys disk page zero
5716  *      @ioc: Pointer to a Adapter Structure
5717  *      @phys_disk_num: io unit unique phys disk num generated by the ioc
5718  *      @phys_disk: requested payload data returned
5719  *
5720  *      Return:
5721  *      0 on success
5722  *      -EFAULT if read of config page header fails or data pointer not NULL
5723  *      -ENOMEM if pci_alloc failed
5724  **/
5725 int
5726 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5727                         RaidPhysDiskPage0_t *phys_disk)
5728 {
5729         CONFIGPARMS                     cfg;
5730         ConfigPageHeader_t              hdr;
5731         dma_addr_t                      dma_handle;
5732         pRaidPhysDiskPage0_t            buffer = NULL;
5733         int                             rc;
5734
5735         memset(&cfg, 0 , sizeof(CONFIGPARMS));
5736         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5737         memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5738
5739         hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5740         hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5741         cfg.cfghdr.hdr = &hdr;
5742         cfg.physAddr = -1;
5743         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5744
5745         if (mpt_config(ioc, &cfg) != 0) {
5746                 rc = -EFAULT;
5747                 goto out;
5748         }
5749
5750         if (!hdr.PageLength) {
5751                 rc = -EFAULT;
5752                 goto out;
5753         }
5754
5755         buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5756             &dma_handle);
5757
5758         if (!buffer) {
5759                 rc = -ENOMEM;
5760                 goto out;
5761         }
5762
5763         cfg.physAddr = dma_handle;
5764         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5765         cfg.pageAddr = phys_disk_num;
5766
5767         if (mpt_config(ioc, &cfg) != 0) {
5768                 rc = -EFAULT;
5769                 goto out;
5770         }
5771
5772         rc = 0;
5773         memcpy(phys_disk, buffer, sizeof(*buffer));
5774         phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5775
5776  out:
5777
5778         if (buffer)
5779                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5780                     dma_handle);
5781
5782         return rc;
5783 }
5784
5785 /**
5786  *      mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5787  *      @ioc: Pointer to a Adapter Structure
5788  *      @phys_disk_num: io unit unique phys disk num generated by the ioc
5789  *
5790  *      Return:
5791  *      returns number paths
5792  **/
5793 int
5794 mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5795 {
5796         CONFIGPARMS                     cfg;
5797         ConfigPageHeader_t              hdr;
5798         dma_addr_t                      dma_handle;
5799         pRaidPhysDiskPage1_t            buffer = NULL;
5800         int                             rc;
5801
5802         memset(&cfg, 0 , sizeof(CONFIGPARMS));
5803         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5804
5805         hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5806         hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5807         hdr.PageNumber = 1;
5808         cfg.cfghdr.hdr = &hdr;
5809         cfg.physAddr = -1;
5810         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5811
5812         if (mpt_config(ioc, &cfg) != 0) {
5813                 rc = 0;
5814                 goto out;
5815         }
5816
5817         if (!hdr.PageLength) {
5818                 rc = 0;
5819                 goto out;
5820         }
5821
5822         buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5823             &dma_handle);
5824
5825         if (!buffer) {
5826                 rc = 0;
5827                 goto out;
5828         }
5829
5830         cfg.physAddr = dma_handle;
5831         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5832         cfg.pageAddr = phys_disk_num;
5833
5834         if (mpt_config(ioc, &cfg) != 0) {
5835                 rc = 0;
5836                 goto out;
5837         }
5838
5839         rc = buffer->NumPhysDiskPaths;
5840  out:
5841
5842         if (buffer)
5843                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5844                     dma_handle);
5845
5846         return rc;
5847 }
5848 EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5849
5850 /**
5851  *      mpt_raid_phys_disk_pg1 - returns phys disk page 1
5852  *      @ioc: Pointer to a Adapter Structure
5853  *      @phys_disk_num: io unit unique phys disk num generated by the ioc
5854  *      @phys_disk: requested payload data returned
5855  *
5856  *      Return:
5857  *      0 on success
5858  *      -EFAULT if read of config page header fails or data pointer not NULL
5859  *      -ENOMEM if pci_alloc failed
5860  **/
5861 int
5862 mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5863                 RaidPhysDiskPage1_t *phys_disk)
5864 {
5865         CONFIGPARMS                     cfg;
5866         ConfigPageHeader_t              hdr;
5867         dma_addr_t                      dma_handle;
5868         pRaidPhysDiskPage1_t            buffer = NULL;
5869         int                             rc;
5870         int                             i;
5871         __le64                          sas_address;
5872
5873         memset(&cfg, 0 , sizeof(CONFIGPARMS));
5874         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5875         rc = 0;
5876
5877         hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5878         hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5879         hdr.PageNumber = 1;
5880         cfg.cfghdr.hdr = &hdr;
5881         cfg.physAddr = -1;
5882         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5883
5884         if (mpt_config(ioc, &cfg) != 0) {
5885                 rc = -EFAULT;
5886                 goto out;
5887         }
5888
5889         if (!hdr.PageLength) {
5890                 rc = -EFAULT;
5891                 goto out;
5892         }
5893
5894         buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5895             &dma_handle);
5896
5897         if (!buffer) {
5898                 rc = -ENOMEM;
5899                 goto out;
5900         }
5901
5902         cfg.physAddr = dma_handle;
5903         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5904         cfg.pageAddr = phys_disk_num;
5905
5906         if (mpt_config(ioc, &cfg) != 0) {
5907                 rc = -EFAULT;
5908                 goto out;
5909         }
5910
5911         phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5912         phys_disk->PhysDiskNum = phys_disk_num;
5913         for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5914                 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5915                 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5916                 phys_disk->Path[i].OwnerIdentifier =
5917                                 buffer->Path[i].OwnerIdentifier;
5918                 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5919                 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5920                 sas_address = le64_to_cpu(sas_address);
5921                 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5922                 memcpy(&sas_address,
5923                                 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5924                 sas_address = le64_to_cpu(sas_address);
5925                 memcpy(&phys_disk->Path[i].OwnerWWID,
5926                                 &sas_address, sizeof(__le64));
5927         }
5928
5929  out:
5930
5931         if (buffer)
5932                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5933                     dma_handle);
5934
5935         return rc;
5936 }
5937 EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5938
5939
5940 /**
5941  *      mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5942  *      @ioc: Pointer to a Adapter Strucutre
5943  *
5944  *      Return:
5945  *      0 on success
5946  *      -EFAULT if read of config page header fails or data pointer not NULL
5947  *      -ENOMEM if pci_alloc failed
5948  **/
5949 int
5950 mpt_findImVolumes(MPT_ADAPTER *ioc)
5951 {
5952         IOCPage2_t              *pIoc2;
5953         u8                      *mem;
5954         dma_addr_t               ioc2_dma;
5955         CONFIGPARMS              cfg;
5956         ConfigPageHeader_t       header;
5957         int                      rc = 0;
5958         int                      iocpage2sz;
5959         int                      i;
5960
5961         if (!ioc->ir_firmware)
5962                 return 0;
5963
5964         /* Free the old page
5965          */
5966         kfree(ioc->raid_data.pIocPg2);
5967         ioc->raid_data.pIocPg2 = NULL;
5968         mpt_inactive_raid_list_free(ioc);
5969
5970         /* Read IOCP2 header then the page.
5971          */
5972         header.PageVersion = 0;
5973         header.PageLength = 0;
5974         header.PageNumber = 2;
5975         header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5976         cfg.cfghdr.hdr = &header;
5977         cfg.physAddr = -1;
5978         cfg.pageAddr = 0;
5979         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5980         cfg.dir = 0;
5981         cfg.timeout = 0;
5982         if (mpt_config(ioc, &cfg) != 0)
5983                  return -EFAULT;
5984
5985         if (header.PageLength == 0)
5986                 return -EFAULT;
5987
5988         iocpage2sz = header.PageLength * 4;
5989         pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5990         if (!pIoc2)
5991                 return -ENOMEM;
5992
5993         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5994         cfg.physAddr = ioc2_dma;
5995         if (mpt_config(ioc, &cfg) != 0)
5996                 goto out;
5997
5998         mem = kmalloc(iocpage2sz, GFP_KERNEL);
5999         if (!mem) {
6000                 rc = -ENOMEM;
6001                 goto out;
6002         }
6003
6004         memcpy(mem, (u8 *)pIoc2, iocpage2sz);
6005         ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6006
6007         mpt_read_ioc_pg_3(ioc);
6008
6009         for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6010                 mpt_inactive_raid_volumes(ioc,
6011                     pIoc2->RaidVolume[i].VolumeBus,
6012                     pIoc2->RaidVolume[i].VolumeID);
6013
6014  out:
6015         pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6016
6017         return rc;
6018 }
6019
6020 static int
6021 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6022 {
6023         IOCPage3_t              *pIoc3;
6024         u8                      *mem;
6025         CONFIGPARMS              cfg;
6026         ConfigPageHeader_t       header;
6027         dma_addr_t               ioc3_dma;
6028         int                      iocpage3sz = 0;
6029
6030         /* Free the old page
6031          */
6032         kfree(ioc->raid_data.pIocPg3);
6033         ioc->raid_data.pIocPg3 = NULL;
6034
6035         /* There is at least one physical disk.
6036          * Read and save IOC Page 3
6037          */
6038         header.PageVersion = 0;
6039         header.PageLength = 0;
6040         header.PageNumber = 3;
6041         header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6042         cfg.cfghdr.hdr = &header;
6043         cfg.physAddr = -1;
6044         cfg.pageAddr = 0;
6045         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6046         cfg.dir = 0;
6047         cfg.timeout = 0;
6048         if (mpt_config(ioc, &cfg) != 0)
6049                 return 0;
6050
6051         if (header.PageLength == 0)
6052                 return 0;
6053
6054         /* Read Header good, alloc memory
6055          */
6056         iocpage3sz = header.PageLength * 4;
6057         pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6058         if (!pIoc3)
6059                 return 0;
6060
6061         /* Read the Page and save the data
6062          * into malloc'd memory.
6063          */
6064         cfg.physAddr = ioc3_dma;
6065         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6066         if (mpt_config(ioc, &cfg) == 0) {
6067                 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6068                 if (mem) {
6069                         memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6070                         ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6071                 }
6072         }
6073
6074         pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6075
6076         return 0;
6077 }
6078
6079 static void
6080 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6081 {
6082         IOCPage4_t              *pIoc4;
6083         CONFIGPARMS              cfg;
6084         ConfigPageHeader_t       header;
6085         dma_addr_t               ioc4_dma;
6086         int                      iocpage4sz;
6087
6088         /* Read and save IOC Page 4
6089          */
6090         header.PageVersion = 0;
6091         header.PageLength = 0;
6092         header.PageNumber = 4;
6093         header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6094         cfg.cfghdr.hdr = &header;
6095         cfg.physAddr = -1;
6096         cfg.pageAddr = 0;
6097         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6098         cfg.dir = 0;
6099         cfg.timeout = 0;
6100         if (mpt_config(ioc, &cfg) != 0)
6101                 return;
6102
6103         if (header.PageLength == 0)
6104                 return;
6105
6106         if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6107                 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6108                 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6109                 if (!pIoc4)
6110                         return;
6111                 ioc->alloc_total += iocpage4sz;
6112         } else {
6113                 ioc4_dma = ioc->spi_data.IocPg4_dma;
6114                 iocpage4sz = ioc->spi_data.IocPg4Sz;
6115         }
6116
6117         /* Read the Page into dma memory.
6118          */
6119         cfg.physAddr = ioc4_dma;
6120         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6121         if (mpt_config(ioc, &cfg) == 0) {
6122                 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6123                 ioc->spi_data.IocPg4_dma = ioc4_dma;
6124                 ioc->spi_data.IocPg4Sz = iocpage4sz;
6125         } else {
6126                 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6127                 ioc->spi_data.pIocPg4 = NULL;
6128                 ioc->alloc_total -= iocpage4sz;
6129         }
6130 }
6131
6132 static void
6133 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6134 {
6135         IOCPage1_t              *pIoc1;
6136         CONFIGPARMS              cfg;
6137         ConfigPageHeader_t       header;
6138         dma_addr_t               ioc1_dma;
6139         int                      iocpage1sz = 0;
6140         u32                      tmp;
6141
6142         /* Check the Coalescing Timeout in IOC Page 1
6143          */
6144         header.PageVersion = 0;
6145         header.PageLength = 0;
6146         header.PageNumber = 1;
6147         header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6148         cfg.cfghdr.hdr = &header;
6149         cfg.physAddr = -1;
6150         cfg.pageAddr = 0;
6151         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6152         cfg.dir = 0;
6153         cfg.timeout = 0;
6154         if (mpt_config(ioc, &cfg) != 0)
6155                 return;
6156
6157         if (header.PageLength == 0)
6158                 return;
6159
6160         /* Read Header good, alloc memory
6161          */
6162         iocpage1sz = header.PageLength * 4;
6163         pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6164         if (!pIoc1)
6165                 return;
6166
6167         /* Read the Page and check coalescing timeout
6168          */
6169         cfg.physAddr = ioc1_dma;
6170         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6171         if (mpt_config(ioc, &cfg) == 0) {
6172
6173                 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6174                 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6175                         tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6176
6177                         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6178                                         ioc->name, tmp));
6179
6180                         if (tmp > MPT_COALESCING_TIMEOUT) {
6181                                 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6182
6183                                 /* Write NVRAM and current
6184                                  */
6185                                 cfg.dir = 1;
6186                                 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6187                                 if (mpt_config(ioc, &cfg) == 0) {
6188                                         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6189                                                         ioc->name, MPT_COALESCING_TIMEOUT));
6190
6191                                         cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6192                                         if (mpt_config(ioc, &cfg) == 0) {
6193                                                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6194                                                                 "Reset NVRAM Coalescing Timeout to = %d\n",
6195                                                                 ioc->name, MPT_COALESCING_TIMEOUT));
6196                                         } else {
6197                                                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6198                                                                 "Reset NVRAM Coalescing Timeout Failed\n",
6199                                                                 ioc->name));
6200                                         }
6201
6202                                 } else {
6203                                         dprintk(ioc, printk(MYIOC_s_WARN_FMT
6204                                                 "Reset of Current Coalescing Timeout Failed!\n",
6205                                                 ioc->name));
6206                                 }
6207                         }
6208
6209                 } else {
6210                         dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6211                 }
6212         }
6213
6214         pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6215
6216         return;
6217 }
6218
6219 static void
6220 mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6221 {
6222         CONFIGPARMS             cfg;
6223         ConfigPageHeader_t      hdr;
6224         dma_addr_t              buf_dma;
6225         ManufacturingPage0_t    *pbuf = NULL;
6226
6227         memset(&cfg, 0 , sizeof(CONFIGPARMS));
6228         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6229
6230         hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6231         cfg.cfghdr.hdr = &hdr;
6232         cfg.physAddr = -1;
6233         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6234         cfg.timeout = 10;
6235
6236         if (mpt_config(ioc, &cfg) != 0)
6237                 goto out;
6238
6239         if (!cfg.cfghdr.hdr->PageLength)
6240                 goto out;
6241
6242         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6243         pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6244         if (!pbuf)
6245                 goto out;
6246
6247         cfg.physAddr = buf_dma;
6248
6249         if (mpt_config(ioc, &cfg) != 0)
6250                 goto out;
6251
6252         memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6253         memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6254         memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6255
6256 out:
6257
6258         if (pbuf)
6259                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6260 }
6261
6262 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6263 /**
6264  *      SendEventNotification - Send EventNotification (on or off) request to adapter
6265  *      @ioc: Pointer to MPT_ADAPTER structure
6266  *      @EvSwitch: Event switch flags
6267  *      @sleepFlag: Specifies whether the process can sleep
6268  */
6269 static int
6270 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6271 {
6272         EventNotification_t     evn;
6273         MPIDefaultReply_t       reply_buf;
6274
6275         memset(&evn, 0, sizeof(EventNotification_t));
6276         memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6277
6278         evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6279         evn.Switch = EvSwitch;
6280         evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6281
6282         devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6283             "Sending EventNotification (%d) request %p\n",
6284             ioc->name, EvSwitch, &evn));
6285
6286         return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6287             (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6288             sleepFlag);
6289 }
6290
6291 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6292 /**
6293  *      SendEventAck - Send EventAck request to MPT adapter.
6294  *      @ioc: Pointer to MPT_ADAPTER structure
6295  *      @evnp: Pointer to original EventNotification request
6296  */
6297 static int
6298 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6299 {
6300         EventAck_t      *pAck;
6301
6302         if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6303                 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6304                     ioc->name, __func__));
6305                 return -1;
6306         }
6307
6308         devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6309
6310         pAck->Function     = MPI_FUNCTION_EVENT_ACK;
6311         pAck->ChainOffset  = 0;
6312         pAck->Reserved[0]  = pAck->Reserved[1] = 0;
6313         pAck->MsgFlags     = 0;
6314         pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6315         pAck->Event        = evnp->Event;
6316         pAck->EventContext = evnp->EventContext;
6317
6318         mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6319
6320         return 0;
6321 }
6322
6323 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6324 /**
6325  *      mpt_config - Generic function to issue config message
6326  *      @ioc:   Pointer to an adapter structure
6327  *      @pCfg:  Pointer to a configuration structure. Struct contains
6328  *              action, page address, direction, physical address
6329  *              and pointer to a configuration page header
6330  *              Page header is updated.
6331  *
6332  *      Returns 0 for success
6333  *      -EPERM if not allowed due to ISR context
6334  *      -EAGAIN if no msg frames currently available
6335  *      -EFAULT for non-successful reply or no reply (timeout)
6336  */
6337 int
6338 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6339 {
6340         Config_t        *pReq;
6341         ConfigReply_t   *pReply;
6342         ConfigExtendedPageHeader_t  *pExtHdr = NULL;
6343         MPT_FRAME_HDR   *mf;
6344         int              ii;
6345         int              flagsLength;
6346         long             timeout;
6347         int              ret;
6348         u8               page_type = 0, extend_page;
6349         unsigned long    timeleft;
6350         unsigned long    flags;
6351     int          in_isr;
6352         u8               issue_hard_reset = 0;
6353         u8               retry_count = 0;
6354
6355         /*      Prevent calling wait_event() (below), if caller happens
6356          *      to be in ISR context, because that is fatal!
6357          */
6358         in_isr = in_interrupt();
6359         if (in_isr) {
6360                 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6361                                 ioc->name));
6362                 return -EPERM;
6363     }
6364
6365         /* don't send a config page during diag reset */
6366         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6367         if (ioc->ioc_reset_in_progress) {
6368                 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6369                     "%s: busy with host reset\n", ioc->name, __func__));
6370                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6371                 return -EBUSY;
6372         }
6373         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6374
6375         /* don't send if no chance of success */
6376         if (!ioc->active ||
6377             mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6378                 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6379                     "%s: ioc not operational, %d, %xh\n",
6380                     ioc->name, __func__, ioc->active,
6381                     mpt_GetIocState(ioc, 0)));
6382                 return -EFAULT;
6383         }
6384
6385  retry_config:
6386         mutex_lock(&ioc->mptbase_cmds.mutex);
6387         /* init the internal cmd struct */
6388         memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6389         INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6390
6391         /* Get and Populate a free Frame
6392          */
6393         if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6394                 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6395                 "mpt_config: no msg frames!\n", ioc->name));
6396                 ret = -EAGAIN;
6397                 goto out;
6398         }
6399
6400         pReq = (Config_t *)mf;
6401         pReq->Action = pCfg->action;
6402         pReq->Reserved = 0;
6403         pReq->ChainOffset = 0;
6404         pReq->Function = MPI_FUNCTION_CONFIG;
6405
6406         /* Assume page type is not extended and clear "reserved" fields. */
6407         pReq->ExtPageLength = 0;
6408         pReq->ExtPageType = 0;
6409         pReq->MsgFlags = 0;
6410
6411         for (ii=0; ii < 8; ii++)
6412                 pReq->Reserved2[ii] = 0;
6413
6414         pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6415         pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6416         pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6417         pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6418
6419         if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6420                 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6421                 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6422                 pReq->ExtPageType = pExtHdr->ExtPageType;
6423                 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6424
6425                 /* Page Length must be treated as a reserved field for the
6426                  * extended header.
6427                  */
6428                 pReq->Header.PageLength = 0;
6429         }
6430
6431         pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6432
6433         /* Add a SGE to the config request.
6434          */
6435         if (pCfg->dir)
6436                 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6437         else
6438                 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6439
6440         if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6441             MPI_CONFIG_PAGETYPE_EXTENDED) {
6442                 flagsLength |= pExtHdr->ExtPageLength * 4;
6443                 page_type = pReq->ExtPageType;
6444                 extend_page = 1;
6445         } else {
6446                 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6447                 page_type = pReq->Header.PageType;
6448                 extend_page = 0;
6449         }
6450
6451         dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6452             "Sending Config request type 0x%x, page 0x%x and action %d\n",
6453             ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6454
6455         ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6456         timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6457         mpt_put_msg_frame(mpt_base_index, ioc, mf);
6458         timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6459                 timeout);
6460         if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6461                 ret = -ETIME;
6462                 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6463                     "Failed Sending Config request type 0x%x, page 0x%x,"
6464                     " action %d, status %xh, time left %ld\n\n",
6465                         ioc->name, page_type, pReq->Header.PageNumber,
6466                         pReq->Action, ioc->mptbase_cmds.status, timeleft));
6467                 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6468                         goto out;
6469                 if (!timeleft) {
6470                         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6471                         if (ioc->ioc_reset_in_progress) {
6472                                 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6473                                         flags);
6474                                 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6475                                         " progress mpt_config timed out.!!\n",
6476                                         __func__, ioc->name);
6477                                 mutex_unlock(&ioc->mptbase_cmds.mutex);
6478                                 return -EFAULT;
6479                         }
6480                         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6481                         issue_hard_reset = 1;
6482                 }
6483                 goto out;
6484         }
6485
6486         if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6487                 ret = -1;
6488                 goto out;
6489         }
6490         pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6491         ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6492         if (ret == MPI_IOCSTATUS_SUCCESS) {
6493                 if (extend_page) {
6494                         pCfg->cfghdr.ehdr->ExtPageLength =
6495                             le16_to_cpu(pReply->ExtPageLength);
6496                         pCfg->cfghdr.ehdr->ExtPageType =
6497                             pReply->ExtPageType;
6498                 }
6499                 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6500                 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6501                 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6502                 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6503
6504         }
6505
6506         if (retry_count)
6507                 printk(MYIOC_s_INFO_FMT "Retry completed "
6508                     "ret=0x%x timeleft=%ld\n",
6509                     ioc->name, ret, timeleft);
6510
6511         dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6512              ret, le32_to_cpu(pReply->IOCLogInfo)));
6513
6514 out:
6515
6516         CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6517         mutex_unlock(&ioc->mptbase_cmds.mutex);
6518         if (issue_hard_reset) {
6519                 issue_hard_reset = 0;
6520                 printk(MYIOC_s_WARN_FMT
6521                        "Issuing Reset from %s!!, doorbell=0x%08x\n",
6522                        ioc->name, __func__, mpt_GetIocState(ioc, 0));
6523                 if (retry_count == 0) {
6524                         if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6525                                 retry_count++;
6526                 } else
6527                         mpt_HardResetHandler(ioc, CAN_SLEEP);
6528
6529                 mpt_free_msg_frame(ioc, mf);
6530                 /* attempt one retry for a timed out command */
6531                 if (retry_count < 2) {
6532                         printk(MYIOC_s_INFO_FMT
6533                             "Attempting Retry Config request"
6534                             " type 0x%x, page 0x%x,"
6535                             " action %d\n", ioc->name, page_type,
6536                             pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6537                         retry_count++;
6538                         goto retry_config;
6539                 }
6540         }
6541         return ret;
6542
6543 }
6544
6545 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6546 /**
6547  *      mpt_ioc_reset - Base cleanup for hard reset
6548  *      @ioc: Pointer to the adapter structure
6549  *      @reset_phase: Indicates pre- or post-reset functionality
6550  *
6551  *      Remark: Frees resources with internally generated commands.
6552  */
6553 static int
6554 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6555 {
6556         switch (reset_phase) {
6557         case MPT_IOC_SETUP_RESET:
6558                 ioc->taskmgmt_quiesce_io = 1;
6559                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6560                     "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6561                 break;
6562         case MPT_IOC_PRE_RESET:
6563                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6564                     "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6565                 break;
6566         case MPT_IOC_POST_RESET:
6567                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6568                     "%s: MPT_IOC_POST_RESET\n",  ioc->name, __func__));
6569 /* wake up mptbase_cmds */
6570                 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6571                         ioc->mptbase_cmds.status |=
6572                             MPT_MGMT_STATUS_DID_IOCRESET;
6573                         complete(&ioc->mptbase_cmds.done);
6574                 }
6575 /* wake up taskmgmt_cmds */
6576                 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6577                         ioc->taskmgmt_cmds.status |=
6578                                 MPT_MGMT_STATUS_DID_IOCRESET;
6579                         complete(&ioc->taskmgmt_cmds.done);
6580                 }
6581                 break;
6582         default:
6583                 break;
6584         }
6585
6586         return 1;               /* currently means nothing really */
6587 }
6588
6589
6590 #ifdef CONFIG_PROC_FS           /* { */
6591 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6592 /*
6593  *      procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6594  */
6595 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6596 /**
6597  *      procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6598  *
6599  *      Returns 0 for success, non-zero for failure.
6600  */
6601 static int
6602 procmpt_create(void)
6603 {
6604         mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6605         if (mpt_proc_root_dir == NULL)
6606                 return -ENOTDIR;
6607
6608         proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
6609         proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
6610         return 0;
6611 }
6612
6613 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6614 /**
6615  *      procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6616  *
6617  *      Returns 0 for success, non-zero for failure.
6618  */
6619 static void
6620 procmpt_destroy(void)
6621 {
6622         remove_proc_entry("version", mpt_proc_root_dir);
6623         remove_proc_entry("summary", mpt_proc_root_dir);
6624         remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6625 }
6626
6627 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6628 /*
6629  *      Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6630  */
6631 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6632
6633 static int mpt_summary_proc_show(struct seq_file *m, void *v)
6634 {
6635         MPT_ADAPTER *ioc = m->private;
6636
6637         if (ioc) {
6638                 seq_mpt_print_ioc_summary(ioc, m, 1);
6639         } else {
6640                 list_for_each_entry(ioc, &ioc_list, list) {
6641                         seq_mpt_print_ioc_summary(ioc, m, 1);
6642                 }
6643         }
6644
6645         return 0;
6646 }
6647
6648 static int mpt_summary_proc_open(struct inode *inode, struct file *file)
6649 {
6650         return single_open(file, mpt_summary_proc_show, PDE_DATA(inode));
6651 }
6652
6653 static const struct file_operations mpt_summary_proc_fops = {
6654         .owner          = THIS_MODULE,
6655         .open           = mpt_summary_proc_open,
6656         .read           = seq_read,
6657         .llseek         = seq_lseek,
6658         .release        = single_release,
6659 };
6660
6661 static int mpt_version_proc_show(struct seq_file *m, void *v)
6662 {
6663         u8       cb_idx;
6664         int      scsi, fc, sas, lan, ctl, targ, dmp;
6665         char    *drvname;
6666
6667         seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6668         seq_printf(m, "  Fusion MPT base driver\n");
6669
6670         scsi = fc = sas = lan = ctl = targ = dmp = 0;
6671         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6672                 drvname = NULL;
6673                 if (MptCallbacks[cb_idx]) {
6674                         switch (MptDriverClass[cb_idx]) {
6675                         case MPTSPI_DRIVER:
6676                                 if (!scsi++) drvname = "SPI host";
6677                                 break;
6678                         case MPTFC_DRIVER:
6679                                 if (!fc++) drvname = "FC host";
6680                                 break;
6681                         case MPTSAS_DRIVER:
6682                                 if (!sas++) drvname = "SAS host";
6683                                 break;
6684                         case MPTLAN_DRIVER:
6685                                 if (!lan++) drvname = "LAN";
6686                                 break;
6687                         case MPTSTM_DRIVER:
6688                                 if (!targ++) drvname = "SCSI target";
6689                                 break;
6690                         case MPTCTL_DRIVER:
6691                                 if (!ctl++) drvname = "ioctl";
6692                                 break;
6693                         }
6694
6695                         if (drvname)
6696                                 seq_printf(m, "  Fusion MPT %s driver\n", drvname);
6697                 }
6698         }
6699
6700         return 0;
6701 }
6702
6703 static int mpt_version_proc_open(struct inode *inode, struct file *file)
6704 {
6705         return single_open(file, mpt_version_proc_show, NULL);
6706 }
6707
6708 static const struct file_operations mpt_version_proc_fops = {
6709         .owner          = THIS_MODULE,
6710         .open           = mpt_version_proc_open,
6711         .read           = seq_read,
6712         .llseek         = seq_lseek,
6713         .release        = single_release,
6714 };
6715
6716 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6717 {
6718         MPT_ADAPTER     *ioc = m->private;
6719         char             expVer[32];
6720         int              sz;
6721         int              p;
6722
6723         mpt_get_fw_exp_ver(expVer, ioc);
6724
6725         seq_printf(m, "%s:", ioc->name);
6726         if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6727                 seq_printf(m, "  (f/w download boot flag set)");
6728 //      if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6729 //              seq_printf(m, "  CONFIG_CHECKSUM_FAIL!");
6730
6731         seq_printf(m, "\n  ProductID = 0x%04x (%s)\n",
6732                         ioc->facts.ProductID,
6733                         ioc->prod_name);
6734         seq_printf(m, "  FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6735         if (ioc->facts.FWImageSize)
6736                 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6737         seq_printf(m, "\n  MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6738         seq_printf(m, "  FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6739         seq_printf(m, "  EventState = 0x%02x\n", ioc->facts.EventState);
6740
6741         seq_printf(m, "  CurrentHostMfaHighAddr = 0x%08x\n",
6742                         ioc->facts.CurrentHostMfaHighAddr);
6743         seq_printf(m, "  CurrentSenseBufferHighAddr = 0x%08x\n",
6744                         ioc->facts.CurrentSenseBufferHighAddr);
6745
6746         seq_printf(m, "  MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6747         seq_printf(m, "  MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6748
6749         seq_printf(m, "  RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6750                                         (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6751         /*
6752          *  Rounding UP to nearest 4-kB boundary here...
6753          */
6754         sz = (ioc->req_sz * ioc->req_depth) + 128;
6755         sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6756         seq_printf(m, "    {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6757                                         ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6758         seq_printf(m, "    {MaxReqSz=%d}   {MaxReqDepth=%d}\n",
6759                                         4*ioc->facts.RequestFrameSize,
6760                                         ioc->facts.GlobalCredits);
6761
6762         seq_printf(m, "  Frames   @ 0x%p (Dma @ 0x%p)\n",
6763                                         (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6764         sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6765         seq_printf(m, "    {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6766                                         ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6767         seq_printf(m, "    {MaxRepSz=%d}   {MaxRepDepth=%d}\n",
6768                                         ioc->facts.CurReplyFrameSize,
6769                                         ioc->facts.ReplyQueueDepth);
6770
6771         seq_printf(m, "  MaxDevices = %d\n",
6772                         (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6773         seq_printf(m, "  MaxBuses = %d\n", ioc->facts.MaxBuses);
6774
6775         /* per-port info */
6776         for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6777                 seq_printf(m, "  PortNumber = %d (of %d)\n",
6778                                 p+1,
6779                                 ioc->facts.NumberOfPorts);
6780                 if (ioc->bus_type == FC) {
6781                         if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6782                                 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6783                                 seq_printf(m, "    LanAddr = %pMR\n", a);
6784                         }
6785                         seq_printf(m, "    WWN = %08X%08X:%08X%08X\n",
6786                                         ioc->fc_port_page0[p].WWNN.High,
6787                                         ioc->fc_port_page0[p].WWNN.Low,
6788                                         ioc->fc_port_page0[p].WWPN.High,
6789                                         ioc->fc_port_page0[p].WWPN.Low);
6790                 }
6791         }
6792
6793         return 0;
6794 }
6795
6796 static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
6797 {
6798         return single_open(file, mpt_iocinfo_proc_show, PDE_DATA(inode));
6799 }
6800
6801 static const struct file_operations mpt_iocinfo_proc_fops = {
6802         .owner          = THIS_MODULE,
6803         .open           = mpt_iocinfo_proc_open,
6804         .read           = seq_read,
6805         .llseek         = seq_lseek,
6806         .release        = single_release,
6807 };
6808 #endif          /* CONFIG_PROC_FS } */
6809
6810 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6811 static void
6812 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6813 {
6814         buf[0] ='\0';
6815         if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6816                 sprintf(buf, " (Exp %02d%02d)",
6817                         (ioc->facts.FWVersion.Word >> 16) & 0x00FF,     /* Month */
6818                         (ioc->facts.FWVersion.Word >> 8) & 0x1F);       /* Day */
6819
6820                 /* insider hack! */
6821                 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6822                         strcat(buf, " [MDBG]");
6823         }
6824 }
6825
6826 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6827 /**
6828  *      mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6829  *      @ioc: Pointer to MPT_ADAPTER structure
6830  *      @buffer: Pointer to buffer where IOC summary info should be written
6831  *      @size: Pointer to number of bytes we wrote (set by this routine)
6832  *      @len: Offset at which to start writing in buffer
6833  *      @showlan: Display LAN stuff?
6834  *
6835  *      This routine writes (english readable) ASCII text, which represents
6836  *      a summary of IOC information, to a buffer.
6837  */
6838 void
6839 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6840 {
6841         char expVer[32];
6842         int y;
6843
6844         mpt_get_fw_exp_ver(expVer, ioc);
6845
6846         /*
6847          *  Shorter summary of attached ioc's...
6848          */
6849         y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6850                         ioc->name,
6851                         ioc->prod_name,
6852                         MPT_FW_REV_MAGIC_ID_STRING,     /* "FwRev=" or somesuch */
6853                         ioc->facts.FWVersion.Word,
6854                         expVer,
6855                         ioc->facts.NumberOfPorts,
6856                         ioc->req_depth);
6857
6858         if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6859                 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6860                 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
6861         }
6862
6863         y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6864
6865         if (!ioc->active)
6866                 y += sprintf(buffer+len+y, " (disabled)");
6867
6868         y += sprintf(buffer+len+y, "\n");
6869
6870         *size = y;
6871 }
6872
6873 #ifdef CONFIG_PROC_FS
6874 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6875 {
6876         char expVer[32];
6877
6878         mpt_get_fw_exp_ver(expVer, ioc);
6879
6880         /*
6881          *  Shorter summary of attached ioc's...
6882          */
6883         seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6884                         ioc->name,
6885                         ioc->prod_name,
6886                         MPT_FW_REV_MAGIC_ID_STRING,     /* "FwRev=" or somesuch */
6887                         ioc->facts.FWVersion.Word,
6888                         expVer,
6889                         ioc->facts.NumberOfPorts,
6890                         ioc->req_depth);
6891
6892         if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6893                 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6894                 seq_printf(m, ", LanAddr=%pMR", a);
6895         }
6896
6897         seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6898
6899         if (!ioc->active)
6900                 seq_printf(m, " (disabled)");
6901
6902         seq_putc(m, '\n');
6903 }
6904 #endif
6905
6906 /**
6907  *      mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6908  *      @ioc: Pointer to MPT_ADAPTER structure
6909  *
6910  *      Returns 0 for SUCCESS or -1 if FAILED.
6911  *
6912  *      If -1 is return, then it was not possible to set the flags
6913  **/
6914 int
6915 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6916 {
6917         unsigned long    flags;
6918         int              retval;
6919
6920         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6921         if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6922             (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6923                 retval = -1;
6924                 goto out;
6925         }
6926         retval = 0;
6927         ioc->taskmgmt_in_progress = 1;
6928         ioc->taskmgmt_quiesce_io = 1;
6929         if (ioc->alt_ioc) {
6930                 ioc->alt_ioc->taskmgmt_in_progress = 1;
6931                 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6932         }
6933  out:
6934         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6935         return retval;
6936 }
6937 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6938
6939 /**
6940  *      mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6941  *      @ioc: Pointer to MPT_ADAPTER structure
6942  *
6943  **/
6944 void
6945 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6946 {
6947         unsigned long    flags;
6948
6949         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6950         ioc->taskmgmt_in_progress = 0;
6951         ioc->taskmgmt_quiesce_io = 0;
6952         if (ioc->alt_ioc) {
6953                 ioc->alt_ioc->taskmgmt_in_progress = 0;
6954                 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6955         }
6956         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6957 }
6958 EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6959
6960
6961 /**
6962  *      mpt_halt_firmware - Halts the firmware if it is operational and panic
6963  *      the kernel
6964  *      @ioc: Pointer to MPT_ADAPTER structure
6965  *
6966  **/
6967 void
6968 mpt_halt_firmware(MPT_ADAPTER *ioc)
6969 {
6970         u32      ioc_raw_state;
6971
6972         ioc_raw_state = mpt_GetIocState(ioc, 0);
6973
6974         if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6975                 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6976                         ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6977                 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6978                         ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6979         } else {
6980                 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6981                 panic("%s: Firmware is halted due to command timeout\n",
6982                         ioc->name);
6983         }
6984 }
6985 EXPORT_SYMBOL(mpt_halt_firmware);
6986
6987 /**
6988  *      mpt_SoftResetHandler - Issues a less expensive reset
6989  *      @ioc: Pointer to MPT_ADAPTER structure
6990  *      @sleepFlag: Indicates if sleep or schedule must be called.
6991  *
6992  *      Returns 0 for SUCCESS or -1 if FAILED.
6993  *
6994  *      Message Unit Reset - instructs the IOC to reset the Reply Post and
6995  *      Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
6996  *      All posted buffers are freed, and event notification is turned off.
6997  *      IOC doesn't reply to any outstanding request. This will transfer IOC
6998  *      to READY state.
6999  **/
7000 static int
7001 mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7002 {
7003         int              rc;
7004         int              ii;
7005         u8               cb_idx;
7006         unsigned long    flags;
7007         u32              ioc_state;
7008         unsigned long    time_count;
7009
7010         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
7011                 ioc->name));
7012
7013         ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7014
7015         if (mpt_fwfault_debug)
7016                 mpt_halt_firmware(ioc);
7017
7018         if (ioc_state == MPI_IOC_STATE_FAULT ||
7019             ioc_state == MPI_IOC_STATE_RESET) {
7020                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7021                     "skipping, either in FAULT or RESET state!\n", ioc->name));
7022                 return -1;
7023         }
7024
7025         if (ioc->bus_type == FC) {
7026                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7027                     "skipping, because the bus type is FC!\n", ioc->name));
7028                 return -1;
7029         }
7030
7031         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7032         if (ioc->ioc_reset_in_progress) {
7033                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7034                 return -1;
7035         }
7036         ioc->ioc_reset_in_progress = 1;
7037         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7038
7039         rc = -1;
7040
7041         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7042                 if (MptResetHandlers[cb_idx])
7043                         mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7044         }
7045
7046         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7047         if (ioc->taskmgmt_in_progress) {
7048                 ioc->ioc_reset_in_progress = 0;
7049                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7050                 return -1;
7051         }
7052         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7053         /* Disable reply interrupts (also blocks FreeQ) */
7054         CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7055         ioc->active = 0;
7056         time_count = jiffies;
7057
7058         rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7059
7060         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7061                 if (MptResetHandlers[cb_idx])
7062                         mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7063         }
7064
7065         if (rc)
7066                 goto out;
7067
7068         ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7069         if (ioc_state != MPI_IOC_STATE_READY)
7070                 goto out;
7071
7072         for (ii = 0; ii < 5; ii++) {
7073                 /* Get IOC facts! Allow 5 retries */
7074                 rc = GetIocFacts(ioc, sleepFlag,
7075                         MPT_HOSTEVENT_IOC_RECOVER);
7076                 if (rc == 0)
7077                         break;
7078                 if (sleepFlag == CAN_SLEEP)
7079                         msleep(100);
7080                 else
7081                         mdelay(100);
7082         }
7083         if (ii == 5)
7084                 goto out;
7085
7086         rc = PrimeIocFifos(ioc);
7087         if (rc != 0)
7088                 goto out;
7089
7090         rc = SendIocInit(ioc, sleepFlag);
7091         if (rc != 0)
7092                 goto out;
7093
7094         rc = SendEventNotification(ioc, 1, sleepFlag);
7095         if (rc != 0)
7096                 goto out;
7097
7098         if (ioc->hard_resets < -1)
7099                 ioc->hard_resets++;
7100
7101         /*
7102          * At this point, we know soft reset succeeded.
7103          */
7104
7105         ioc->active = 1;
7106         CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7107
7108  out:
7109         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7110         ioc->ioc_reset_in_progress = 0;
7111         ioc->taskmgmt_quiesce_io = 0;
7112         ioc->taskmgmt_in_progress = 0;
7113         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7114
7115         if (ioc->active) {      /* otherwise, hard reset coming */
7116                 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7117                         if (MptResetHandlers[cb_idx])
7118                                 mpt_signal_reset(cb_idx, ioc,
7119                                         MPT_IOC_POST_RESET);
7120                 }
7121         }
7122
7123         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7124                 "SoftResetHandler: completed (%d seconds): %s\n",
7125                 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7126                 ((rc == 0) ? "SUCCESS" : "FAILED")));
7127
7128         return rc;
7129 }
7130
7131 /**
7132  *      mpt_Soft_Hard_ResetHandler - Try less expensive reset
7133  *      @ioc: Pointer to MPT_ADAPTER structure
7134  *      @sleepFlag: Indicates if sleep or schedule must be called.
7135  *
7136  *      Returns 0 for SUCCESS or -1 if FAILED.
7137  *      Try for softreset first, only if it fails go for expensive
7138  *      HardReset.
7139  **/
7140 int
7141 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7142         int ret = -1;
7143
7144         ret = mpt_SoftResetHandler(ioc, sleepFlag);
7145         if (ret == 0)
7146                 return ret;
7147         ret = mpt_HardResetHandler(ioc, sleepFlag);
7148         return ret;
7149 }
7150 EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7151
7152 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7153 /*
7154  *      Reset Handling
7155  */
7156 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7157 /**
7158  *      mpt_HardResetHandler - Generic reset handler
7159  *      @ioc: Pointer to MPT_ADAPTER structure
7160  *      @sleepFlag: Indicates if sleep or schedule must be called.
7161  *
7162  *      Issues SCSI Task Management call based on input arg values.
7163  *      If TaskMgmt fails, returns associated SCSI request.
7164  *
7165  *      Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7166  *      or a non-interrupt thread.  In the former, must not call schedule().
7167  *
7168  *      Note: A return of -1 is a FATAL error case, as it means a
7169  *      FW reload/initialization failed.
7170  *
7171  *      Returns 0 for SUCCESS or -1 if FAILED.
7172  */
7173 int
7174 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7175 {
7176         int      rc;
7177         u8       cb_idx;
7178         unsigned long    flags;
7179         unsigned long    time_count;
7180
7181         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7182 #ifdef MFCNT
7183         printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7184         printk("MF count 0x%x !\n", ioc->mfcnt);
7185 #endif
7186         if (mpt_fwfault_debug)
7187                 mpt_halt_firmware(ioc);
7188
7189         /* Reset the adapter. Prevent more than 1 call to
7190          * mpt_do_ioc_recovery at any instant in time.
7191          */
7192         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7193         if (ioc->ioc_reset_in_progress) {
7194                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7195                 ioc->wait_on_reset_completion = 1;
7196                 do {
7197                         ssleep(1);
7198                 } while (ioc->ioc_reset_in_progress == 1);
7199                 ioc->wait_on_reset_completion = 0;
7200                 return ioc->reset_status;
7201         }
7202         if (ioc->wait_on_reset_completion) {
7203                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7204                 rc = 0;
7205                 time_count = jiffies;
7206                 goto exit;
7207         }
7208         ioc->ioc_reset_in_progress = 1;
7209         if (ioc->alt_ioc)
7210                 ioc->alt_ioc->ioc_reset_in_progress = 1;
7211         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7212
7213
7214         /* The SCSI driver needs to adjust timeouts on all current
7215          * commands prior to the diagnostic reset being issued.
7216          * Prevents timeouts occurring during a diagnostic reset...very bad.
7217          * For all other protocol drivers, this is a no-op.
7218          */
7219         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7220                 if (MptResetHandlers[cb_idx]) {
7221                         mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7222                         if (ioc->alt_ioc)
7223                                 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7224                                         MPT_IOC_SETUP_RESET);
7225                 }
7226         }
7227
7228         time_count = jiffies;
7229         rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7230         if (rc != 0) {
7231                 printk(KERN_WARNING MYNAM
7232                        ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7233                        rc, ioc->name, mpt_GetIocState(ioc, 0));
7234         } else {
7235                 if (ioc->hard_resets < -1)
7236                         ioc->hard_resets++;
7237         }
7238
7239         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7240         ioc->ioc_reset_in_progress = 0;
7241         ioc->taskmgmt_quiesce_io = 0;
7242         ioc->taskmgmt_in_progress = 0;
7243         ioc->reset_status = rc;
7244         if (ioc->alt_ioc) {
7245                 ioc->alt_ioc->ioc_reset_in_progress = 0;
7246                 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7247                 ioc->alt_ioc->taskmgmt_in_progress = 0;
7248         }
7249         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7250
7251         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7252                 if (MptResetHandlers[cb_idx]) {
7253                         mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7254                         if (ioc->alt_ioc)
7255                                 mpt_signal_reset(cb_idx,
7256                                         ioc->alt_ioc, MPT_IOC_POST_RESET);
7257                 }
7258         }
7259 exit:
7260         dtmprintk(ioc,
7261             printk(MYIOC_s_DEBUG_FMT
7262                 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7263                 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7264                 "SUCCESS" : "FAILED")));
7265
7266         return rc;
7267 }
7268
7269 #ifdef CONFIG_FUSION_LOGGING
7270 static void
7271 mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7272 {
7273         char *ds = NULL;
7274         u32 evData0;
7275         int ii;
7276         u8 event;
7277         char *evStr = ioc->evStr;
7278
7279         event = le32_to_cpu(pEventReply->Event) & 0xFF;
7280         evData0 = le32_to_cpu(pEventReply->Data[0]);
7281
7282         switch(event) {
7283         case MPI_EVENT_NONE:
7284                 ds = "None";
7285                 break;
7286         case MPI_EVENT_LOG_DATA:
7287                 ds = "Log Data";
7288                 break;
7289         case MPI_EVENT_STATE_CHANGE:
7290                 ds = "State Change";
7291                 break;
7292         case MPI_EVENT_UNIT_ATTENTION:
7293                 ds = "Unit Attention";
7294                 break;
7295         case MPI_EVENT_IOC_BUS_RESET:
7296                 ds = "IOC Bus Reset";
7297                 break;
7298         case MPI_EVENT_EXT_BUS_RESET:
7299                 ds = "External Bus Reset";
7300                 break;
7301         case MPI_EVENT_RESCAN:
7302                 ds = "Bus Rescan Event";
7303                 break;
7304         case MPI_EVENT_LINK_STATUS_CHANGE:
7305                 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7306                         ds = "Link Status(FAILURE) Change";
7307                 else
7308                         ds = "Link Status(ACTIVE) Change";
7309                 break;
7310         case MPI_EVENT_LOOP_STATE_CHANGE:
7311                 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7312                         ds = "Loop State(LIP) Change";
7313                 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7314                         ds = "Loop State(LPE) Change";
7315                 else
7316                         ds = "Loop State(LPB) Change";
7317                 break;
7318         case MPI_EVENT_LOGOUT:
7319                 ds = "Logout";
7320                 break;
7321         case MPI_EVENT_EVENT_CHANGE:
7322                 if (evData0)
7323                         ds = "Events ON";
7324                 else
7325                         ds = "Events OFF";
7326                 break;
7327         case MPI_EVENT_INTEGRATED_RAID:
7328         {
7329                 u8 ReasonCode = (u8)(evData0 >> 16);
7330                 switch (ReasonCode) {
7331                 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7332                         ds = "Integrated Raid: Volume Created";
7333                         break;
7334                 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7335                         ds = "Integrated Raid: Volume Deleted";
7336                         break;
7337                 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7338                         ds = "Integrated Raid: Volume Settings Changed";
7339                         break;
7340                 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7341                         ds = "Integrated Raid: Volume Status Changed";
7342                         break;
7343                 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7344                         ds = "Integrated Raid: Volume Physdisk Changed";
7345                         break;
7346                 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7347                         ds = "Integrated Raid: Physdisk Created";
7348                         break;
7349                 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7350                         ds = "Integrated Raid: Physdisk Deleted";
7351                         break;
7352                 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7353                         ds = "Integrated Raid: Physdisk Settings Changed";
7354                         break;
7355                 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7356                         ds = "Integrated Raid: Physdisk Status Changed";
7357                         break;
7358                 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7359                         ds = "Integrated Raid: Domain Validation Needed";
7360                         break;
7361                 case MPI_EVENT_RAID_RC_SMART_DATA :
7362                         ds = "Integrated Raid; Smart Data";
7363                         break;
7364                 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7365                         ds = "Integrated Raid: Replace Action Started";
7366                         break;
7367                 default:
7368                         ds = "Integrated Raid";
7369                 break;
7370                 }
7371                 break;
7372         }
7373         case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7374                 ds = "SCSI Device Status Change";
7375                 break;
7376         case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7377         {
7378                 u8 id = (u8)(evData0);
7379                 u8 channel = (u8)(evData0 >> 8);
7380                 u8 ReasonCode = (u8)(evData0 >> 16);
7381                 switch (ReasonCode) {
7382                 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7383                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7384                             "SAS Device Status Change: Added: "
7385                             "id=%d channel=%d", id, channel);
7386                         break;
7387                 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7388                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7389                             "SAS Device Status Change: Deleted: "
7390                             "id=%d channel=%d", id, channel);
7391                         break;
7392                 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7393                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7394                             "SAS Device Status Change: SMART Data: "
7395                             "id=%d channel=%d", id, channel);
7396                         break;
7397                 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7398                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7399                             "SAS Device Status Change: No Persistency: "
7400                             "id=%d channel=%d", id, channel);
7401                         break;
7402                 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7403                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7404                             "SAS Device Status Change: Unsupported Device "
7405                             "Discovered : id=%d channel=%d", id, channel);
7406                         break;
7407                 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7408                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7409                             "SAS Device Status Change: Internal Device "
7410                             "Reset : id=%d channel=%d", id, channel);
7411                         break;
7412                 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7413                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7414                             "SAS Device Status Change: Internal Task "
7415                             "Abort : id=%d channel=%d", id, channel);
7416                         break;
7417                 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7418                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7419                             "SAS Device Status Change: Internal Abort "
7420                             "Task Set : id=%d channel=%d", id, channel);
7421                         break;
7422                 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7423                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7424                             "SAS Device Status Change: Internal Clear "
7425                             "Task Set : id=%d channel=%d", id, channel);
7426                         break;
7427                 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7428                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7429                             "SAS Device Status Change: Internal Query "
7430                             "Task : id=%d channel=%d", id, channel);
7431                         break;
7432                 default:
7433                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7434                             "SAS Device Status Change: Unknown: "
7435                             "id=%d channel=%d", id, channel);
7436                         break;
7437                 }
7438                 break;
7439         }
7440         case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7441                 ds = "Bus Timer Expired";
7442                 break;
7443         case MPI_EVENT_QUEUE_FULL:
7444         {
7445                 u16 curr_depth = (u16)(evData0 >> 16);
7446                 u8 channel = (u8)(evData0 >> 8);
7447                 u8 id = (u8)(evData0);
7448
7449                 snprintf(evStr, EVENT_DESCR_STR_SZ,
7450                    "Queue Full: channel=%d id=%d depth=%d",
7451                    channel, id, curr_depth);
7452                 break;
7453         }
7454         case MPI_EVENT_SAS_SES:
7455                 ds = "SAS SES Event";
7456                 break;
7457         case MPI_EVENT_PERSISTENT_TABLE_FULL:
7458                 ds = "Persistent Table Full";
7459                 break;
7460         case MPI_EVENT_SAS_PHY_LINK_STATUS:
7461         {
7462                 u8 LinkRates = (u8)(evData0 >> 8);
7463                 u8 PhyNumber = (u8)(evData0);
7464                 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7465                         MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7466                 switch (LinkRates) {
7467                 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7468                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7469                            "SAS PHY Link Status: Phy=%d:"
7470                            " Rate Unknown",PhyNumber);
7471                         break;
7472                 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7473                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7474                            "SAS PHY Link Status: Phy=%d:"
7475                            " Phy Disabled",PhyNumber);
7476                         break;
7477                 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7478                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7479                            "SAS PHY Link Status: Phy=%d:"
7480                            " Failed Speed Nego",PhyNumber);
7481                         break;
7482                 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7483                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7484                            "SAS PHY Link Status: Phy=%d:"
7485                            " Sata OOB Completed",PhyNumber);
7486                         break;
7487                 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7488                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7489                            "SAS PHY Link Status: Phy=%d:"
7490                            " Rate 1.5 Gbps",PhyNumber);
7491                         break;
7492                 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7493                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7494                            "SAS PHY Link Status: Phy=%d:"
7495                            " Rate 3.0 Gbps", PhyNumber);
7496                         break;
7497                 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7498                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7499                            "SAS PHY Link Status: Phy=%d:"
7500                            " Rate 6.0 Gbps", PhyNumber);
7501                         break;
7502                 default:
7503                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7504                            "SAS PHY Link Status: Phy=%d", PhyNumber);
7505                         break;
7506                 }
7507                 break;
7508         }
7509         case MPI_EVENT_SAS_DISCOVERY_ERROR:
7510                 ds = "SAS Discovery Error";
7511                 break;
7512         case MPI_EVENT_IR_RESYNC_UPDATE:
7513         {
7514                 u8 resync_complete = (u8)(evData0 >> 16);
7515                 snprintf(evStr, EVENT_DESCR_STR_SZ,
7516                     "IR Resync Update: Complete = %d:",resync_complete);
7517                 break;
7518         }
7519         case MPI_EVENT_IR2:
7520         {
7521                 u8 id = (u8)(evData0);
7522                 u8 channel = (u8)(evData0 >> 8);
7523                 u8 phys_num = (u8)(evData0 >> 24);
7524                 u8 ReasonCode = (u8)(evData0 >> 16);
7525
7526                 switch (ReasonCode) {
7527                 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7528                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7529                             "IR2: LD State Changed: "
7530                             "id=%d channel=%d phys_num=%d",
7531                             id, channel, phys_num);
7532                         break;
7533                 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7534                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7535                             "IR2: PD State Changed "
7536                             "id=%d channel=%d phys_num=%d",
7537                             id, channel, phys_num);
7538                         break;
7539                 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7540                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7541                             "IR2: Bad Block Table Full: "
7542                             "id=%d channel=%d phys_num=%d",
7543                             id, channel, phys_num);
7544                         break;
7545                 case MPI_EVENT_IR2_RC_PD_INSERTED:
7546                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7547                             "IR2: PD Inserted: "
7548                             "id=%d channel=%d phys_num=%d",
7549                             id, channel, phys_num);
7550                         break;
7551                 case MPI_EVENT_IR2_RC_PD_REMOVED:
7552                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7553                             "IR2: PD Removed: "
7554                             "id=%d channel=%d phys_num=%d",
7555                             id, channel, phys_num);
7556                         break;
7557                 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7558                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7559                             "IR2: Foreign CFG Detected: "
7560                             "id=%d channel=%d phys_num=%d",
7561                             id, channel, phys_num);
7562                         break;
7563                 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7564                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7565                             "IR2: Rebuild Medium Error: "
7566                             "id=%d channel=%d phys_num=%d",
7567                             id, channel, phys_num);
7568                         break;
7569                 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7570                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7571                             "IR2: Dual Port Added: "
7572                             "id=%d channel=%d phys_num=%d",
7573                             id, channel, phys_num);
7574                         break;
7575                 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7576                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7577                             "IR2: Dual Port Removed: "
7578                             "id=%d channel=%d phys_num=%d",
7579                             id, channel, phys_num);
7580                         break;
7581                 default:
7582                         ds = "IR2";
7583                 break;
7584                 }
7585                 break;
7586         }
7587         case MPI_EVENT_SAS_DISCOVERY:
7588         {
7589                 if (evData0)
7590                         ds = "SAS Discovery: Start";
7591                 else
7592                         ds = "SAS Discovery: Stop";
7593                 break;
7594         }
7595         case MPI_EVENT_LOG_ENTRY_ADDED:
7596                 ds = "SAS Log Entry Added";
7597                 break;
7598
7599         case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7600         {
7601                 u8 phy_num = (u8)(evData0);
7602                 u8 port_num = (u8)(evData0 >> 8);
7603                 u8 port_width = (u8)(evData0 >> 16);
7604                 u8 primative = (u8)(evData0 >> 24);
7605                 snprintf(evStr, EVENT_DESCR_STR_SZ,
7606                     "SAS Broadcase Primative: phy=%d port=%d "
7607                     "width=%d primative=0x%02x",
7608                     phy_num, port_num, port_width, primative);
7609                 break;
7610         }
7611
7612         case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7613         {
7614                 u8 reason = (u8)(evData0);
7615
7616                 switch (reason) {
7617                 case MPI_EVENT_SAS_INIT_RC_ADDED:
7618                         ds = "SAS Initiator Status Change: Added";
7619                         break;
7620                 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7621                         ds = "SAS Initiator Status Change: Deleted";
7622                         break;
7623                 default:
7624                         ds = "SAS Initiator Status Change";
7625                         break;
7626                 }
7627                 break;
7628         }
7629
7630         case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7631         {
7632                 u8 max_init = (u8)(evData0);
7633                 u8 current_init = (u8)(evData0 >> 8);
7634
7635                 snprintf(evStr, EVENT_DESCR_STR_SZ,
7636                     "SAS Initiator Device Table Overflow: max initiators=%02d "
7637                     "current initators=%02d",
7638                     max_init, current_init);
7639                 break;
7640         }
7641         case MPI_EVENT_SAS_SMP_ERROR:
7642         {
7643                 u8 status = (u8)(evData0);
7644                 u8 port_num = (u8)(evData0 >> 8);
7645                 u8 result = (u8)(evData0 >> 16);
7646
7647                 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7648                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7649                             "SAS SMP Error: port=%d result=0x%02x",
7650                             port_num, result);
7651                 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7652                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7653                             "SAS SMP Error: port=%d : CRC Error",
7654                             port_num);
7655                 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7656                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7657                             "SAS SMP Error: port=%d : Timeout",
7658                             port_num);
7659                 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7660                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7661                             "SAS SMP Error: port=%d : No Destination",
7662                             port_num);
7663                 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7664                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7665                             "SAS SMP Error: port=%d : Bad Destination",
7666                             port_num);
7667                 else
7668                         snprintf(evStr, EVENT_DESCR_STR_SZ,
7669                             "SAS SMP Error: port=%d : status=0x%02x",
7670                             port_num, status);
7671                 break;
7672         }
7673
7674         case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7675         {
7676                 u8 reason = (u8)(evData0);
7677
7678                 switch (reason) {
7679                 case MPI_EVENT_SAS_EXP_RC_ADDED:
7680                         ds = "Expander Status Change: Added";
7681                         break;
7682                 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7683                         ds = "Expander Status Change: Deleted";
7684                         break;
7685                 default:
7686                         ds = "Expander Status Change";
7687                         break;
7688                 }
7689                 break;
7690         }
7691
7692         /*
7693          *  MPT base "custom" events may be added here...
7694          */
7695         default:
7696                 ds = "Unknown";
7697                 break;
7698         }
7699         if (ds)
7700                 strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
7701
7702
7703         devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7704             "MPT event:(%02Xh) : %s\n",
7705             ioc->name, event, evStr));
7706
7707         devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7708             ": Event data:\n"));
7709         for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7710                 devtverboseprintk(ioc, printk(" %08x",
7711                     le32_to_cpu(pEventReply->Data[ii])));
7712         devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7713 }
7714 #endif
7715 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7716 /**
7717  *      ProcessEventNotification - Route EventNotificationReply to all event handlers
7718  *      @ioc: Pointer to MPT_ADAPTER structure
7719  *      @pEventReply: Pointer to EventNotification reply frame
7720  *      @evHandlers: Pointer to integer, number of event handlers
7721  *
7722  *      Routes a received EventNotificationReply to all currently registered
7723  *      event handlers.
7724  *      Returns sum of event handlers return values.
7725  */
7726 static int
7727 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7728 {
7729         u16 evDataLen;
7730         u32 evData0 = 0;
7731         int ii;
7732         u8 cb_idx;
7733         int r = 0;
7734         int handlers = 0;
7735         u8 event;
7736
7737         /*
7738          *  Do platform normalization of values
7739          */
7740         event = le32_to_cpu(pEventReply->Event) & 0xFF;
7741         evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7742         if (evDataLen) {
7743                 evData0 = le32_to_cpu(pEventReply->Data[0]);
7744         }
7745
7746 #ifdef CONFIG_FUSION_LOGGING
7747         if (evDataLen)
7748                 mpt_display_event_info(ioc, pEventReply);
7749 #endif
7750
7751         /*
7752          *  Do general / base driver event processing
7753          */
7754         switch(event) {
7755         case MPI_EVENT_EVENT_CHANGE:            /* 0A */
7756                 if (evDataLen) {
7757                         u8 evState = evData0 & 0xFF;
7758
7759                         /* CHECKME! What if evState unexpectedly says OFF (0)? */
7760
7761                         /* Update EventState field in cached IocFacts */
7762                         if (ioc->facts.Function) {
7763                                 ioc->facts.EventState = evState;
7764                         }
7765                 }
7766                 break;
7767         case MPI_EVENT_INTEGRATED_RAID:
7768                 mptbase_raid_process_event_data(ioc,
7769                     (MpiEventDataRaid_t *)pEventReply->Data);
7770                 break;
7771         default:
7772                 break;
7773         }
7774
7775         /*
7776          * Should this event be logged? Events are written sequentially.
7777          * When buffer is full, start again at the top.
7778          */
7779         if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7780                 int idx;
7781
7782                 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7783
7784                 ioc->events[idx].event = event;
7785                 ioc->events[idx].eventContext = ioc->eventContext;
7786
7787                 for (ii = 0; ii < 2; ii++) {
7788                         if (ii < evDataLen)
7789                                 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7790                         else
7791                                 ioc->events[idx].data[ii] =  0;
7792                 }
7793
7794                 ioc->eventContext++;
7795         }
7796
7797
7798         /*
7799          *  Call each currently registered protocol event handler.
7800          */
7801         for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7802                 if (MptEvHandlers[cb_idx]) {
7803                         devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7804                             "Routing Event to event handler #%d\n",
7805                             ioc->name, cb_idx));
7806                         r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7807                         handlers++;
7808                 }
7809         }
7810         /* FIXME?  Examine results here? */
7811
7812         /*
7813          *  If needed, send (a single) EventAck.
7814          */
7815         if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7816                 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7817                         "EventAck required\n",ioc->name));
7818                 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7819                         devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7820                                         ioc->name, ii));
7821                 }
7822         }
7823
7824         *evHandlers = handlers;
7825         return r;
7826 }
7827
7828 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7829 /**
7830  *      mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7831  *      @ioc: Pointer to MPT_ADAPTER structure
7832  *      @log_info: U32 LogInfo reply word from the IOC
7833  *
7834  *      Refer to lsi/mpi_log_fc.h.
7835  */
7836 static void
7837 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7838 {
7839         char *desc = "unknown";
7840
7841         switch (log_info & 0xFF000000) {
7842         case MPI_IOCLOGINFO_FC_INIT_BASE:
7843                 desc = "FCP Initiator";
7844                 break;
7845         case MPI_IOCLOGINFO_FC_TARGET_BASE:
7846                 desc = "FCP Target";
7847                 break;
7848         case MPI_IOCLOGINFO_FC_LAN_BASE:
7849                 desc = "LAN";
7850                 break;
7851         case MPI_IOCLOGINFO_FC_MSG_BASE:
7852                 desc = "MPI Message Layer";
7853                 break;
7854         case MPI_IOCLOGINFO_FC_LINK_BASE:
7855                 desc = "FC Link";
7856                 break;
7857         case MPI_IOCLOGINFO_FC_CTX_BASE:
7858                 desc = "Context Manager";
7859                 break;
7860         case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7861                 desc = "Invalid Field Offset";
7862                 break;
7863         case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7864                 desc = "State Change Info";
7865                 break;
7866         }
7867
7868         printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7869                         ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7870 }
7871
7872 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7873 /**
7874  *      mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7875  *      @ioc: Pointer to MPT_ADAPTER structure
7876  *      @log_info: U32 LogInfo word from the IOC
7877  *
7878  *      Refer to lsi/sp_log.h.
7879  */
7880 static void
7881 mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7882 {
7883         u32 info = log_info & 0x00FF0000;
7884         char *desc = "unknown";
7885
7886         switch (info) {
7887         case 0x00010000:
7888                 desc = "bug! MID not found";
7889                 break;
7890
7891         case 0x00020000:
7892                 desc = "Parity Error";
7893                 break;
7894
7895         case 0x00030000:
7896                 desc = "ASYNC Outbound Overrun";
7897                 break;
7898
7899         case 0x00040000:
7900                 desc = "SYNC Offset Error";
7901                 break;
7902
7903         case 0x00050000:
7904                 desc = "BM Change";
7905                 break;
7906
7907         case 0x00060000:
7908                 desc = "Msg In Overflow";
7909                 break;
7910
7911         case 0x00070000:
7912                 desc = "DMA Error";
7913                 break;
7914
7915         case 0x00080000:
7916                 desc = "Outbound DMA Overrun";
7917                 break;
7918
7919         case 0x00090000:
7920                 desc = "Task Management";
7921                 break;
7922
7923         case 0x000A0000:
7924                 desc = "Device Problem";
7925                 break;
7926
7927         case 0x000B0000:
7928                 desc = "Invalid Phase Change";
7929                 break;
7930
7931         case 0x000C0000:
7932                 desc = "Untagged Table Size";
7933                 break;
7934
7935         }
7936
7937         printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7938 }
7939
7940 /* strings for sas loginfo */
7941         static char *originator_str[] = {
7942                 "IOP",                                          /* 00h */
7943                 "PL",                                           /* 01h */
7944                 "IR"                                            /* 02h */
7945         };
7946         static char *iop_code_str[] = {
7947                 NULL,                                           /* 00h */
7948                 "Invalid SAS Address",                          /* 01h */
7949                 NULL,                                           /* 02h */
7950                 "Invalid Page",                                 /* 03h */
7951                 "Diag Message Error",                           /* 04h */
7952                 "Task Terminated",                              /* 05h */
7953                 "Enclosure Management",                         /* 06h */
7954                 "Target Mode"                                   /* 07h */
7955         };
7956         static char *pl_code_str[] = {
7957                 NULL,                                           /* 00h */
7958                 "Open Failure",                                 /* 01h */
7959                 "Invalid Scatter Gather List",                  /* 02h */
7960                 "Wrong Relative Offset or Frame Length",        /* 03h */
7961                 "Frame Transfer Error",                         /* 04h */
7962                 "Transmit Frame Connected Low",                 /* 05h */
7963                 "SATA Non-NCQ RW Error Bit Set",                /* 06h */
7964                 "SATA Read Log Receive Data Error",             /* 07h */
7965                 "SATA NCQ Fail All Commands After Error",       /* 08h */
7966                 "SATA Error in Receive Set Device Bit FIS",     /* 09h */
7967                 "Receive Frame Invalid Message",                /* 0Ah */
7968                 "Receive Context Message Valid Error",          /* 0Bh */
7969                 "Receive Frame Current Frame Error",            /* 0Ch */
7970                 "SATA Link Down",                               /* 0Dh */
7971                 "Discovery SATA Init W IOS",                    /* 0Eh */
7972                 "Config Invalid Page",                          /* 0Fh */
7973                 "Discovery SATA Init Timeout",                  /* 10h */
7974                 "Reset",                                        /* 11h */
7975                 "Abort",                                        /* 12h */
7976                 "IO Not Yet Executed",                          /* 13h */
7977                 "IO Executed",                                  /* 14h */
7978                 "Persistent Reservation Out Not Affiliation "
7979                     "Owner",                                    /* 15h */
7980                 "Open Transmit DMA Abort",                      /* 16h */
7981                 "IO Device Missing Delay Retry",                /* 17h */
7982                 "IO Cancelled Due to Receive Error",            /* 18h */
7983                 NULL,                                           /* 19h */
7984                 NULL,                                           /* 1Ah */
7985                 NULL,                                           /* 1Bh */
7986                 NULL,                                           /* 1Ch */
7987                 NULL,                                           /* 1Dh */
7988                 NULL,                                           /* 1Eh */
7989                 NULL,                                           /* 1Fh */
7990                 "Enclosure Management"                          /* 20h */
7991         };
7992         static char *ir_code_str[] = {
7993                 "Raid Action Error",                            /* 00h */
7994                 NULL,                                           /* 00h */
7995                 NULL,                                           /* 01h */
7996                 NULL,                                           /* 02h */
7997                 NULL,                                           /* 03h */
7998                 NULL,                                           /* 04h */
7999                 NULL,                                           /* 05h */
8000                 NULL,                                           /* 06h */
8001                 NULL                                            /* 07h */
8002         };
8003         static char *raid_sub_code_str[] = {
8004                 NULL,                                           /* 00h */
8005                 "Volume Creation Failed: Data Passed too "
8006                     "Large",                                    /* 01h */
8007                 "Volume Creation Failed: Duplicate Volumes "
8008                     "Attempted",                                /* 02h */
8009                 "Volume Creation Failed: Max Number "
8010                     "Supported Volumes Exceeded",               /* 03h */
8011                 "Volume Creation Failed: DMA Error",            /* 04h */
8012                 "Volume Creation Failed: Invalid Volume Type",  /* 05h */
8013                 "Volume Creation Failed: Error Reading "
8014                     "MFG Page 4",                               /* 06h */
8015                 "Volume Creation Failed: Creating Internal "
8016                     "Structures",                               /* 07h */
8017                 NULL,                                           /* 08h */
8018                 NULL,                                           /* 09h */
8019                 NULL,                                           /* 0Ah */
8020                 NULL,                                           /* 0Bh */
8021                 NULL,                                           /* 0Ch */
8022                 NULL,                                           /* 0Dh */
8023                 NULL,                                           /* 0Eh */
8024                 NULL,                                           /* 0Fh */
8025                 "Activation failed: Already Active Volume",     /* 10h */
8026                 "Activation failed: Unsupported Volume Type",   /* 11h */
8027                 "Activation failed: Too Many Active Volumes",   /* 12h */
8028                 "Activation failed: Volume ID in Use",          /* 13h */
8029                 "Activation failed: Reported Failure",          /* 14h */
8030                 "Activation failed: Importing a Volume",        /* 15h */
8031                 NULL,                                           /* 16h */
8032                 NULL,                                           /* 17h */
8033                 NULL,                                           /* 18h */
8034                 NULL,                                           /* 19h */
8035                 NULL,                                           /* 1Ah */
8036                 NULL,                                           /* 1Bh */
8037                 NULL,                                           /* 1Ch */
8038                 NULL,                                           /* 1Dh */
8039                 NULL,                                           /* 1Eh */
8040                 NULL,                                           /* 1Fh */
8041                 "Phys Disk failed: Too Many Phys Disks",        /* 20h */
8042                 "Phys Disk failed: Data Passed too Large",      /* 21h */
8043                 "Phys Disk failed: DMA Error",                  /* 22h */
8044                 "Phys Disk failed: Invalid <channel:id>",       /* 23h */
8045                 "Phys Disk failed: Creating Phys Disk Config "
8046                     "Page",                                     /* 24h */
8047                 NULL,                                           /* 25h */
8048                 NULL,                                           /* 26h */
8049                 NULL,                                           /* 27h */
8050                 NULL,                                           /* 28h */
8051                 NULL,                                           /* 29h */
8052                 NULL,                                           /* 2Ah */
8053                 NULL,                                           /* 2Bh */
8054                 NULL,                                           /* 2Ch */
8055                 NULL,                                           /* 2Dh */
8056                 NULL,                                           /* 2Eh */
8057                 NULL,                                           /* 2Fh */
8058                 "Compatibility Error: IR Disabled",             /* 30h */
8059                 "Compatibility Error: Inquiry Command Failed",  /* 31h */
8060                 "Compatibility Error: Device not Direct Access "
8061                     "Device ",                                  /* 32h */
8062                 "Compatibility Error: Removable Device Found",  /* 33h */
8063                 "Compatibility Error: Device SCSI Version not "
8064                     "2 or Higher",                              /* 34h */
8065                 "Compatibility Error: SATA Device, 48 BIT LBA "
8066                     "not Supported",                            /* 35h */
8067                 "Compatibility Error: Device doesn't have "
8068                     "512 Byte Block Sizes",                     /* 36h */
8069                 "Compatibility Error: Volume Type Check Failed", /* 37h */
8070                 "Compatibility Error: Volume Type is "
8071                     "Unsupported by FW",                        /* 38h */
8072                 "Compatibility Error: Disk Drive too Small for "
8073                     "use in Volume",                            /* 39h */
8074                 "Compatibility Error: Phys Disk for Create "
8075                     "Volume not Found",                         /* 3Ah */
8076                 "Compatibility Error: Too Many or too Few "
8077                     "Disks for Volume Type",                    /* 3Bh */
8078                 "Compatibility Error: Disk stripe Sizes "
8079                     "Must be 64KB",                             /* 3Ch */
8080                 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8081         };
8082
8083 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8084 /**
8085  *      mpt_sas_log_info - Log information returned from SAS IOC.
8086  *      @ioc: Pointer to MPT_ADAPTER structure
8087  *      @log_info: U32 LogInfo reply word from the IOC
8088  *      @cb_idx: callback function's handle
8089  *
8090  *      Refer to lsi/mpi_log_sas.h.
8091  **/
8092 static void
8093 mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8094 {
8095 union loginfo_type {
8096         u32     loginfo;
8097         struct {
8098                 u32     subcode:16;
8099                 u32     code:8;
8100                 u32     originator:4;
8101                 u32     bus_type:4;
8102         }dw;
8103 };
8104         union loginfo_type sas_loginfo;
8105         char *originator_desc = NULL;
8106         char *code_desc = NULL;
8107         char *sub_code_desc = NULL;
8108
8109         sas_loginfo.loginfo = log_info;
8110         if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8111             (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8112                 return;
8113
8114         originator_desc = originator_str[sas_loginfo.dw.originator];
8115
8116         switch (sas_loginfo.dw.originator) {
8117
8118                 case 0:  /* IOP */
8119                         if (sas_loginfo.dw.code <
8120                             ARRAY_SIZE(iop_code_str))
8121                                 code_desc = iop_code_str[sas_loginfo.dw.code];
8122                         break;
8123                 case 1:  /* PL */
8124                         if (sas_loginfo.dw.code <
8125                             ARRAY_SIZE(pl_code_str))
8126                                 code_desc = pl_code_str[sas_loginfo.dw.code];
8127                         break;
8128                 case 2:  /* IR */
8129                         if (sas_loginfo.dw.code >=
8130                             ARRAY_SIZE(ir_code_str))
8131                                 break;
8132                         code_desc = ir_code_str[sas_loginfo.dw.code];
8133                         if (sas_loginfo.dw.subcode >=
8134                             ARRAY_SIZE(raid_sub_code_str))
8135                                 break;
8136                         if (sas_loginfo.dw.code == 0)
8137                                 sub_code_desc =
8138                                     raid_sub_code_str[sas_loginfo.dw.subcode];
8139                         break;
8140                 default:
8141                         return;
8142         }
8143
8144         if (sub_code_desc != NULL)
8145                 printk(MYIOC_s_INFO_FMT
8146                         "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8147                         " SubCode={%s} cb_idx %s\n",
8148                         ioc->name, log_info, originator_desc, code_desc,
8149                         sub_code_desc, MptCallbacksName[cb_idx]);
8150         else if (code_desc != NULL)
8151                 printk(MYIOC_s_INFO_FMT
8152                         "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8153                         " SubCode(0x%04x) cb_idx %s\n",
8154                         ioc->name, log_info, originator_desc, code_desc,
8155                         sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8156         else
8157                 printk(MYIOC_s_INFO_FMT
8158                         "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8159                         " SubCode(0x%04x) cb_idx %s\n",
8160                         ioc->name, log_info, originator_desc,
8161                         sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8162                         MptCallbacksName[cb_idx]);
8163 }
8164
8165 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8166 /**
8167  *      mpt_iocstatus_info_config - IOCSTATUS information for config pages
8168  *      @ioc: Pointer to MPT_ADAPTER structure
8169  *      @ioc_status: U32 IOCStatus word from IOC
8170  *      @mf: Pointer to MPT request frame
8171  *
8172  *      Refer to lsi/mpi.h.
8173  **/
8174 static void
8175 mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8176 {
8177         Config_t *pReq = (Config_t *)mf;
8178         char extend_desc[EVENT_DESCR_STR_SZ];
8179         char *desc = NULL;
8180         u32 form;
8181         u8 page_type;
8182
8183         if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8184                 page_type = pReq->ExtPageType;
8185         else
8186                 page_type = pReq->Header.PageType;
8187
8188         /*
8189          * ignore invalid page messages for GET_NEXT_HANDLE
8190          */
8191         form = le32_to_cpu(pReq->PageAddress);
8192         if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8193                 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8194                     page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8195                     page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8196                         if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8197                                 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8198                                 return;
8199                 }
8200                 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8201                         if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8202                                 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8203                                 return;
8204         }
8205
8206         snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8207             "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8208             page_type, pReq->Header.PageNumber, pReq->Action, form);
8209
8210         switch (ioc_status) {
8211
8212         case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8213                 desc = "Config Page Invalid Action";
8214                 break;
8215
8216         case MPI_IOCSTATUS_CONFIG_INVALID_TYPE:   /* 0x0021 */
8217                 desc = "Config Page Invalid Type";
8218                 break;
8219
8220         case MPI_IOCSTATUS_CONFIG_INVALID_PAGE:   /* 0x0022 */
8221                 desc = "Config Page Invalid Page";
8222                 break;
8223
8224         case MPI_IOCSTATUS_CONFIG_INVALID_DATA:   /* 0x0023 */
8225                 desc = "Config Page Invalid Data";
8226                 break;
8227
8228         case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS:    /* 0x0024 */
8229                 desc = "Config Page No Defaults";
8230                 break;
8231
8232         case MPI_IOCSTATUS_CONFIG_CANT_COMMIT:    /* 0x0025 */
8233                 desc = "Config Page Can't Commit";
8234                 break;
8235         }
8236
8237         if (!desc)
8238                 return;
8239
8240         dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8241             ioc->name, ioc_status, desc, extend_desc));
8242 }
8243
8244 /**
8245  *      mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8246  *      @ioc: Pointer to MPT_ADAPTER structure
8247  *      @ioc_status: U32 IOCStatus word from IOC
8248  *      @mf: Pointer to MPT request frame
8249  *
8250  *      Refer to lsi/mpi.h.
8251  **/
8252 static void
8253 mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8254 {
8255         u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8256         char *desc = NULL;
8257
8258         switch (status) {
8259
8260 /****************************************************************************/
8261 /*  Common IOCStatus values for all replies                                 */
8262 /****************************************************************************/
8263
8264         case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8265                 desc = "Invalid Function";
8266                 break;
8267
8268         case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8269                 desc = "Busy";
8270                 break;
8271
8272         case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8273                 desc = "Invalid SGL";
8274                 break;
8275
8276         case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8277                 desc = "Internal Error";
8278                 break;
8279
8280         case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8281                 desc = "Reserved";
8282                 break;
8283
8284         case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8285                 desc = "Insufficient Resources";
8286                 break;
8287
8288         case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8289                 desc = "Invalid Field";
8290                 break;
8291
8292         case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8293                 desc = "Invalid State";
8294                 break;
8295
8296 /****************************************************************************/
8297 /*  Config IOCStatus values                                                 */
8298 /****************************************************************************/
8299
8300         case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8301         case MPI_IOCSTATUS_CONFIG_INVALID_TYPE:   /* 0x0021 */
8302         case MPI_IOCSTATUS_CONFIG_INVALID_PAGE:   /* 0x0022 */
8303         case MPI_IOCSTATUS_CONFIG_INVALID_DATA:   /* 0x0023 */
8304         case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS:    /* 0x0024 */
8305         case MPI_IOCSTATUS_CONFIG_CANT_COMMIT:    /* 0x0025 */
8306                 mpt_iocstatus_info_config(ioc, status, mf);
8307                 break;
8308
8309 /****************************************************************************/
8310 /*  SCSIIO Reply (SPI, FCP, SAS) initiator values                           */
8311 /*                                                                          */
8312 /*  Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8313 /*                                                                          */
8314 /****************************************************************************/
8315
8316         case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8317         case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8318         case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8319         case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8320         case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8321         case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8322         case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8323         case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8324         case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8325         case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8326         case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8327         case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8328         case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8329                 break;
8330
8331 /****************************************************************************/
8332 /*  SCSI Target values                                                      */
8333 /****************************************************************************/
8334
8335         case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8336                 desc = "Target: Priority IO";
8337                 break;
8338
8339         case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8340                 desc = "Target: Invalid Port";
8341                 break;
8342
8343         case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8344                 desc = "Target Invalid IO Index:";
8345                 break;
8346
8347         case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8348                 desc = "Target: Aborted";
8349                 break;
8350
8351         case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8352                 desc = "Target: No Conn Retryable";
8353                 break;
8354
8355         case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8356                 desc = "Target: No Connection";
8357                 break;
8358
8359         case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8360                 desc = "Target: Transfer Count Mismatch";
8361                 break;
8362
8363         case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8364                 desc = "Target: STS Data not Sent";
8365                 break;
8366
8367         case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8368                 desc = "Target: Data Offset Error";
8369                 break;
8370
8371         case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8372                 desc = "Target: Too Much Write Data";
8373                 break;
8374
8375         case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8376                 desc = "Target: IU Too Short";
8377                 break;
8378
8379         case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8380                 desc = "Target: ACK NAK Timeout";
8381                 break;
8382
8383         case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8384                 desc = "Target: Nak Received";
8385                 break;
8386
8387 /****************************************************************************/
8388 /*  Fibre Channel Direct Access values                                      */
8389 /****************************************************************************/
8390
8391         case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8392                 desc = "FC: Aborted";
8393                 break;
8394
8395         case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8396                 desc = "FC: RX ID Invalid";
8397                 break;
8398
8399         case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8400                 desc = "FC: DID Invalid";
8401                 break;
8402
8403         case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8404                 desc = "FC: Node Logged Out";
8405                 break;
8406
8407         case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8408                 desc = "FC: Exchange Canceled";
8409                 break;
8410
8411 /****************************************************************************/
8412 /*  LAN values                                                              */
8413 /****************************************************************************/
8414
8415         case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8416                 desc = "LAN: Device not Found";
8417                 break;
8418
8419         case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8420                 desc = "LAN: Device Failure";
8421                 break;
8422
8423         case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8424                 desc = "LAN: Transmit Error";
8425                 break;
8426
8427         case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8428                 desc = "LAN: Transmit Aborted";
8429                 break;
8430
8431         case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8432                 desc = "LAN: Receive Error";
8433                 break;
8434
8435         case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8436                 desc = "LAN: Receive Aborted";
8437                 break;
8438
8439         case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8440                 desc = "LAN: Partial Packet";
8441                 break;
8442
8443         case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8444                 desc = "LAN: Canceled";
8445                 break;
8446
8447 /****************************************************************************/
8448 /*  Serial Attached SCSI values                                             */
8449 /****************************************************************************/
8450
8451         case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8452                 desc = "SAS: SMP Request Failed";
8453                 break;
8454
8455         case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8456                 desc = "SAS: SMP Data Overrun";
8457                 break;
8458
8459         default:
8460                 desc = "Others";
8461                 break;
8462         }
8463
8464         if (!desc)
8465                 return;
8466
8467         dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8468             ioc->name, status, desc));
8469 }
8470
8471 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8472 EXPORT_SYMBOL(mpt_attach);
8473 EXPORT_SYMBOL(mpt_detach);
8474 #ifdef CONFIG_PM
8475 EXPORT_SYMBOL(mpt_resume);
8476 EXPORT_SYMBOL(mpt_suspend);
8477 #endif
8478 EXPORT_SYMBOL(ioc_list);
8479 EXPORT_SYMBOL(mpt_register);
8480 EXPORT_SYMBOL(mpt_deregister);
8481 EXPORT_SYMBOL(mpt_event_register);
8482 EXPORT_SYMBOL(mpt_event_deregister);
8483 EXPORT_SYMBOL(mpt_reset_register);
8484 EXPORT_SYMBOL(mpt_reset_deregister);
8485 EXPORT_SYMBOL(mpt_device_driver_register);
8486 EXPORT_SYMBOL(mpt_device_driver_deregister);
8487 EXPORT_SYMBOL(mpt_get_msg_frame);
8488 EXPORT_SYMBOL(mpt_put_msg_frame);
8489 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8490 EXPORT_SYMBOL(mpt_free_msg_frame);
8491 EXPORT_SYMBOL(mpt_send_handshake_request);
8492 EXPORT_SYMBOL(mpt_verify_adapter);
8493 EXPORT_SYMBOL(mpt_GetIocState);
8494 EXPORT_SYMBOL(mpt_print_ioc_summary);
8495 EXPORT_SYMBOL(mpt_HardResetHandler);
8496 EXPORT_SYMBOL(mpt_config);
8497 EXPORT_SYMBOL(mpt_findImVolumes);
8498 EXPORT_SYMBOL(mpt_alloc_fw_memory);
8499 EXPORT_SYMBOL(mpt_free_fw_memory);
8500 EXPORT_SYMBOL(mptbase_sas_persist_operation);
8501 EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8502
8503 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8504 /**
8505  *      fusion_init - Fusion MPT base driver initialization routine.
8506  *
8507  *      Returns 0 for success, non-zero for failure.
8508  */
8509 static int __init
8510 fusion_init(void)
8511 {
8512         u8 cb_idx;
8513
8514         show_mptmod_ver(my_NAME, my_VERSION);
8515         printk(KERN_INFO COPYRIGHT "\n");
8516
8517         for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8518                 MptCallbacks[cb_idx] = NULL;
8519                 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8520                 MptEvHandlers[cb_idx] = NULL;
8521                 MptResetHandlers[cb_idx] = NULL;
8522         }
8523
8524         /*  Register ourselves (mptbase) in order to facilitate
8525          *  EventNotification handling.
8526          */
8527         mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8528             "mptbase_reply");
8529
8530         /* Register for hard reset handling callbacks.
8531          */
8532         mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8533
8534 #ifdef CONFIG_PROC_FS
8535         (void) procmpt_create();
8536 #endif
8537         return 0;
8538 }
8539
8540 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8541 /**
8542  *      fusion_exit - Perform driver unload cleanup.
8543  *
8544  *      This routine frees all resources associated with each MPT adapter
8545  *      and removes all %MPT_PROCFS_MPTBASEDIR entries.
8546  */
8547 static void __exit
8548 fusion_exit(void)
8549 {
8550
8551         mpt_reset_deregister(mpt_base_index);
8552
8553 #ifdef CONFIG_PROC_FS
8554         procmpt_destroy();
8555 #endif
8556 }
8557
8558 module_init(fusion_init);
8559 module_exit(fusion_exit);