GNU Linux-libre 4.9-gnu1
[releases.git] / drivers / media / usb / dvb-usb-v2 / af9035.h
1 /*
2  * Afatech AF9035 DVB USB driver
3  *
4  * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
5  * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
6  *
7  *    This program is free software; you can redistribute it and/or modify
8  *    it under the terms of the GNU General Public License as published by
9  *    the Free Software Foundation; either version 2 of the License, or
10  *    (at your option) any later version.
11  *
12  *    This program is distributed in the hope that it will be useful,
13  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
14  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  *    GNU General Public License for more details.
16  *
17  *    You should have received a copy of the GNU General Public License along
18  *    with this program; if not, write to the Free Software Foundation, Inc.,
19  *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
20  */
21
22 #ifndef AF9035_H
23 #define AF9035_H
24
25 #include "dvb_usb.h"
26 #include "af9033.h"
27 #include "tua9001.h"
28 #include "fc0011.h"
29 #include "fc0012.h"
30 #include "mxl5007t.h"
31 #include "tda18218.h"
32 #include "fc2580.h"
33 #include "it913x.h"
34 #include "si2168.h"
35 #include "si2157.h"
36
37 struct reg_val {
38         u32 reg;
39         u8  val;
40 };
41
42 struct reg_val_mask {
43         u32 reg;
44         u8  val;
45         u8  mask;
46 };
47
48 struct usb_req {
49         u8  cmd;
50         u8  mbox;
51         u8  wlen;
52         u8  *wbuf;
53         u8  rlen;
54         u8  *rbuf;
55 };
56
57 struct state {
58 #define BUF_LEN 64
59         u8 buf[BUF_LEN];
60         u8 seq; /* packet sequence number */
61         u8 prechip_version;
62         u8 chip_version;
63         u16 chip_type;
64         u8 dual_mode:1;
65         u8 no_read:1;
66         u16 eeprom_addr;
67         u8 af9033_i2c_addr[2];
68         struct af9033_config af9033_config[2];
69         struct af9033_ops ops;
70         #define AF9035_I2C_CLIENT_MAX 4
71         struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX];
72         struct i2c_adapter *i2c_adapter_demod;
73 };
74
75 static const u32 clock_lut_af9035[] = {
76         20480000, /*      FPGA */
77         16384000, /* 16.38 MHz */
78         20480000, /* 20.48 MHz */
79         36000000, /* 36.00 MHz */
80         30000000, /* 30.00 MHz */
81         26000000, /* 26.00 MHz */
82         28000000, /* 28.00 MHz */
83         32000000, /* 32.00 MHz */
84         34000000, /* 34.00 MHz */
85         24000000, /* 24.00 MHz */
86         22000000, /* 22.00 MHz */
87         12000000, /* 12.00 MHz */
88 };
89
90 static const u32 clock_lut_it9135[] = {
91         12000000, /* 12.00 MHz */
92         20480000, /* 20.48 MHz */
93         36000000, /* 36.00 MHz */
94         30000000, /* 30.00 MHz */
95         26000000, /* 26.00 MHz */
96         28000000, /* 28.00 MHz */
97         32000000, /* 32.00 MHz */
98         34000000, /* 34.00 MHz */
99         24000000, /* 24.00 MHz */
100         22000000, /* 22.00 MHz */
101 };
102
103 #define AF9035_FIRMWARE_AF9035 "/*(DEBLOBBED)*/"
104 #define AF9035_FIRMWARE_IT9135_V1 "/*(DEBLOBBED)*/"
105 #define AF9035_FIRMWARE_IT9135_V2 "/*(DEBLOBBED)*/"
106 #define AF9035_FIRMWARE_IT9303 "/*(DEBLOBBED)*/"
107
108 /*
109  * eeprom is memory mapped as read only. Writing that memory mapped address
110  * will not corrupt eeprom.
111  *
112  * TS mode:
113  * 0  TS
114  * 1  DCA + PIP
115  * 3  PIP
116  * 5  DCA + PIP (AF9035 only)
117  * n  DCA
118  *
119  * Values 0, 3 and 5 are seen to this day. 0 for single TS and 3/5 for dual TS.
120  */
121
122 #define EEPROM_BASE_AF9035        0x42f5
123 #define EEPROM_BASE_IT9135        0x4994
124 #define EEPROM_SHIFT                0x10
125
126 #define EEPROM_IR_MODE              0x18
127 #define EEPROM_TS_MODE              0x31
128 #define EEPROM_2ND_DEMOD_ADDR       0x32
129 #define EEPROM_IR_TYPE              0x34
130 #define EEPROM_1_IF_L               0x38
131 #define EEPROM_1_IF_H               0x39
132 #define EEPROM_1_TUNER_ID           0x3c
133 #define EEPROM_2_IF_L               0x48
134 #define EEPROM_2_IF_H               0x49
135 #define EEPROM_2_TUNER_ID           0x4c
136
137 /* USB commands */
138 #define CMD_MEM_RD                  0x00
139 #define CMD_MEM_WR                  0x01
140 #define CMD_I2C_RD                  0x02
141 #define CMD_I2C_WR                  0x03
142 #define CMD_IR_GET                  0x18
143 #define CMD_FW_DL                   0x21
144 #define CMD_FW_QUERYINFO            0x22
145 #define CMD_FW_BOOT                 0x23
146 #define CMD_FW_DL_BEGIN             0x24
147 #define CMD_FW_DL_END               0x25
148 #define CMD_FW_SCATTER_WR           0x29
149 #define CMD_GENERIC_I2C_RD          0x2a
150 #define CMD_GENERIC_I2C_WR          0x2b
151
152 #endif