drivers/media/usb/dvb-usb/technisat-usb2.c

   1 /*
   2  * Linux driver for Technisat DVB-S/S2 USB 2.0 device
   3  *
   4  * Copyright (C) 2010 Patrick Boettcher,
   5  *                    Kernel Labs Inc. PO Box 745, St James, NY 11780
   6  *
   7  * Development was sponsored by Technisat Digital UK Limited, whose
   8  * registered office is Witan Gate House 500 - 600 Witan Gate West,
   9  * Milton Keynes, MK9 1SH
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of the
  14  * License, or (at your option) any later version.
  15  *
  16  *
  17  * THIS PROGRAM IS PROVIDED "AS IS" AND BOTH THE COPYRIGHT HOLDER AND
  18  * TECHNISAT DIGITAL UK LTD DISCLAIM ALL WARRANTIES WITH REGARD TO
  19  * THIS PROGRAM INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
  20  * FITNESS FOR A PARTICULAR PURPOSE.  NEITHER THE COPYRIGHT HOLDER
  21  * NOR TECHNISAT DIGITAL UK LIMITED SHALL BE LIABLE FOR ANY SPECIAL,
  22  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
  23  * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  24  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
  25  * IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS PROGRAM. See the
  26  * GNU General Public License for more details.
  27  */
  28
  29 #define DVB_USB_LOG_PREFIX "technisat-usb2"
  30 #include "dvb-usb.h"
  31
  32 #include "stv6110x.h"
  33 #include "stv090x.h"
  34
  35 /* module parameters */
  36 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  37
  38 static int debug;
  39 module_param(debug, int, 0644);
  40 MODULE_PARM_DESC(debug,
  41                 "set debugging level (bit-mask: 1=info,2=eeprom,4=i2c,8=rc)." \
  42                 DVB_USB_DEBUG_STATUS);
  43
  44 /* disables all LED control command and
  45  * also does not start the signal polling thread */
  46 static int disable_led_control;
  47 module_param(disable_led_control, int, 0444);
  48 MODULE_PARM_DESC(disable_led_control,
  49                 "disable LED control of the device (default: 0 - LED control is active).");
  50
  51 /* device private data */
  52 struct technisat_usb2_state {
  53         struct dvb_usb_device *dev;
  54         struct delayed_work green_led_work;
  55         u8 power_state;
  56
  57         u16 last_scan_code;
  58
  59         u8 buf[64];
  60 };
  61
  62 /* debug print helpers */
  63 #define deb_info(args...)    dprintk(debug, 0x01, args)
  64 #define deb_eeprom(args...)  dprintk(debug, 0x02, args)
  65 #define deb_i2c(args...)     dprintk(debug, 0x04, args)
  66 #define deb_rc(args...)      dprintk(debug, 0x08, args)
  67
  68 /* vendor requests */
  69 #define SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST 0xB3
  70 #define SET_FRONT_END_RESET_VENDOR_REQUEST         0xB4
  71 #define GET_VERSION_INFO_VENDOR_REQUEST            0xB5
  72 #define SET_GREEN_LED_VENDOR_REQUEST               0xB6
  73 #define SET_RED_LED_VENDOR_REQUEST                 0xB7
  74 #define GET_IR_DATA_VENDOR_REQUEST                 0xB8
  75 #define SET_LED_TIMER_DIVIDER_VENDOR_REQUEST       0xB9
  76 #define SET_USB_REENUMERATION                      0xBA
  77
  78 /* i2c-access methods */
  79 #define I2C_SPEED_100KHZ_BIT 0x40
  80
  81 #define I2C_STATUS_NAK 7
  82 #define I2C_STATUS_OK 8
  83
  84 static int technisat_usb2_i2c_access(struct usb_device *udev,
  85                 u8 device_addr, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
  86 {
  87         u8 *b;
  88         int ret, actual_length;
  89
  90         b = kmalloc(64, GFP_KERNEL);
  91         if (!b)
  92                 return -ENOMEM;
  93
  94         deb_i2c("i2c-access: %02x, tx: ", device_addr);
  95         debug_dump(tx, txlen, deb_i2c);
  96         deb_i2c(" ");
  97
  98         if (txlen > 62) {
  99                 err("i2c TX buffer can't exceed 62 bytes (dev 0x%02x)",
 100                                 device_addr);
 101                 txlen = 62;
 102         }
 103         if (rxlen > 62) {
 104                 err("i2c RX buffer can't exceed 62 bytes (dev 0x%02x)",
 105                                 device_addr);
 106                 rxlen = 62;
 107         }
 108
 109         b[0] = I2C_SPEED_100KHZ_BIT;
 110         b[1] = device_addr << 1;
 111
 112         if (rx != NULL) {
 113                 b[0] |= rxlen;
 114                 b[1] |= 1;
 115         }
 116
 117         memcpy(&b[2], tx, txlen);
 118         ret = usb_bulk_msg(udev,
 119                         usb_sndbulkpipe(udev, 0x01),
 120                         b, 2 + txlen,
 121                         NULL, 1000);
 122
 123         if (ret < 0) {
 124                 err("i2c-error: out failed %02x = %d", device_addr, ret);
 125                 goto err;
 126         }
 127
 128         ret = usb_bulk_msg(udev,
 129                         usb_rcvbulkpipe(udev, 0x01),
 130                         b, 64, &actual_length, 1000);
 131         if (ret < 0) {
 132                 err("i2c-error: in failed %02x = %d", device_addr, ret);
 133                 goto err;
 134         }
 135
 136         if (b[0] != I2C_STATUS_OK) {
 137                 err("i2c-error: %02x = %d", device_addr, b[0]);
 138                 /* handle tuner-i2c-nak */
 139                 if (!(b[0] == I2C_STATUS_NAK &&
 140                                 device_addr == 0x60
 141                                 /* && device_is_technisat_usb2 */))
 142                         goto err;
 143         }
 144
 145         deb_i2c("status: %d, ", b[0]);
 146
 147         if (rx != NULL) {
 148                 memcpy(rx, &b[2], rxlen);
 149
 150                 deb_i2c("rx (%d): ", rxlen);
 151                 debug_dump(rx, rxlen, deb_i2c);
 152         }
 153
 154         deb_i2c("\n");
 155
 156 err:
 157         kfree(b);
 158         return ret;
 159 }
 160
 161 static int technisat_usb2_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
 162                                 int num)
 163 {
 164         int ret = 0, i;
 165         struct dvb_usb_device *d = i2c_get_adapdata(adap);
 166
 167         /* Ensure nobody else hits the i2c bus while we're sending our
 168            sequence of messages, (such as the remote control thread) */
 169         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 170                 return -EAGAIN;
 171
 172         for (i = 0; i < num; i++) {
 173                 if (i+1 < num && msg[i+1].flags & I2C_M_RD) {
 174                         ret = technisat_usb2_i2c_access(d->udev, msg[i+1].addr,
 175                                                 msg[i].buf, msg[i].len,
 176                                                 msg[i+1].buf, msg[i+1].len);
 177                         if (ret != 0)
 178                                 break;
 179                         i++;
 180                 } else {
 181                         ret = technisat_usb2_i2c_access(d->udev, msg[i].addr,
 182                                                 msg[i].buf, msg[i].len,
 183                                                 NULL, 0);
 184                         if (ret != 0)
 185                                 break;
 186                 }
 187         }
 188
 189         if (ret == 0)
 190                 ret = i;
 191
 192         mutex_unlock(&d->i2c_mutex);
 193
 194         return ret;
 195 }
 196
 197 static u32 technisat_usb2_i2c_func(struct i2c_adapter *adapter)
 198 {
 199         return I2C_FUNC_I2C;
 200 }
 201
 202 static struct i2c_algorithm technisat_usb2_i2c_algo = {
 203         .master_xfer   = technisat_usb2_i2c_xfer,
 204         .functionality = technisat_usb2_i2c_func,
 205 };
 206
 207 #if 0
 208 static void technisat_usb2_frontend_reset(struct usb_device *udev)
 209 {
 210         usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 211                         SET_FRONT_END_RESET_VENDOR_REQUEST,
 212                         USB_TYPE_VENDOR | USB_DIR_OUT,
 213                         10, 0,
 214                         NULL, 0, 500);
 215 }
 216 #endif
 217
 218 /* LED control */
 219 enum technisat_usb2_led_state {
 220         TECH_LED_OFF,
 221         TECH_LED_BLINK,
 222         TECH_LED_ON,
 223         TECH_LED_UNDEFINED
 224 };
 225
 226 static int technisat_usb2_set_led(struct dvb_usb_device *d, int red,
 227                                   enum technisat_usb2_led_state st)
 228 {
 229         struct technisat_usb2_state *state = d->priv;
 230         u8 *led = state->buf;
 231         int ret;
 232
 233         led[0] = red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST;
 234
 235         if (disable_led_control && st != TECH_LED_OFF)
 236                 return 0;
 237
 238         switch (st) {
 239         case TECH_LED_ON:
 240                 led[1] = 0x82;
 241                 break;
 242         case TECH_LED_BLINK:
 243                 led[1] = 0x82;
 244                 if (red) {
 245                         led[2] = 0x02;
 246                         led[3] = 10;
 247                         led[4] = 10;
 248                 } else {
 249                         led[2] = 0xff;
 250                         led[3] = 50;
 251                         led[4] = 50;
 252                 }
 253                 led[5] = 1;
 254                 break;
 255
 256         default:
 257         case TECH_LED_OFF:
 258                 led[1] = 0x80;
 259                 break;
 260         }
 261
 262         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 263                 return -EAGAIN;
 264
 265         ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
 266                 red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST,
 267                 USB_TYPE_VENDOR | USB_DIR_OUT,
 268                 0, 0,
 269                 led, 8, 500);
 270
 271         mutex_unlock(&d->i2c_mutex);
 272         return ret;
 273 }
 274
 275 static int technisat_usb2_set_led_timer(struct dvb_usb_device *d, u8 red, u8 green)
 276 {
 277         struct technisat_usb2_state *state = d->priv;
 278         u8 *b = state->buf;
 279         int ret;
 280
 281         b[0] = 0;
 282
 283         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 284                 return -EAGAIN;
 285
 286         ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
 287                 SET_LED_TIMER_DIVIDER_VENDOR_REQUEST,
 288                 USB_TYPE_VENDOR | USB_DIR_OUT,
 289                 (red << 8) | green, 0,
 290                 b, 1, 500);
 291
 292         mutex_unlock(&d->i2c_mutex);
 293
 294         return ret;
 295 }
 296
 297 static void technisat_usb2_green_led_control(struct work_struct *work)
 298 {
 299         struct technisat_usb2_state *state =
 300                 container_of(work, struct technisat_usb2_state, green_led_work.work);
 301         struct dvb_frontend *fe = state->dev->adapter[0].fe_adap[0].fe;
 302
 303         if (state->power_state == 0)
 304                 goto schedule;
 305
 306         if (fe != NULL) {
 307                 enum fe_status status;
 308
 309                 if (fe->ops.read_status(fe, &status) != 0)
 310                         goto schedule;
 311
 312                 if (status & FE_HAS_LOCK) {
 313                         u32 ber;
 314
 315                         if (fe->ops.read_ber(fe, &ber) != 0)
 316                                 goto schedule;
 317
 318                         if (ber > 1000)
 319                                 technisat_usb2_set_led(state->dev, 0, TECH_LED_BLINK);
 320                         else
 321                                 technisat_usb2_set_led(state->dev, 0, TECH_LED_ON);
 322                 } else
 323                         technisat_usb2_set_led(state->dev, 0, TECH_LED_OFF);
 324         }
 325
 326 schedule:
 327         schedule_delayed_work(&state->green_led_work,
 328                         msecs_to_jiffies(500));
 329 }
 330
 331 /* method to find out whether the firmware has to be downloaded or not */
 332 static int technisat_usb2_identify_state(struct usb_device *udev,
 333                 struct dvb_usb_device_properties *props,
 334                 struct dvb_usb_device_description **desc, int *cold)
 335 {
 336         int ret;
 337         u8 *version;
 338
 339         version = kmalloc(3, GFP_KERNEL);
 340         if (!version)
 341                 return -ENOMEM;
 342
 343         /* first select the interface */
 344         if (usb_set_interface(udev, 0, 1) != 0)
 345                 err("could not set alternate setting to 0");
 346         else
 347                 info("set alternate setting");
 348
 349         *cold = 0; /* by default do not download a firmware - just in case something is wrong */
 350
 351         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 352                 GET_VERSION_INFO_VENDOR_REQUEST,
 353                 USB_TYPE_VENDOR | USB_DIR_IN,
 354                 0, 0,
 355                 version, 3, 500);
 356
 357         if (ret < 0)
 358                 *cold = 1;
 359         else {
 360                 info("firmware version: %d.%d", version[1], version[2]);
 361                 *cold = 0;
 362         }
 363
 364         kfree(version);
 365
 366         return 0;
 367 }
 368
 369 /* power control */
 370 static int technisat_usb2_power_ctrl(struct dvb_usb_device *d, int level)
 371 {
 372         struct technisat_usb2_state *state = d->priv;
 373
 374         state->power_state = level;
 375
 376         if (disable_led_control)
 377                 return 0;
 378
 379         /* green led is turned off in any case - will be turned on when tuning */
 380         technisat_usb2_set_led(d, 0, TECH_LED_OFF);
 381         /* red led is turned on all the time */
 382         technisat_usb2_set_led(d, 1, TECH_LED_ON);
 383         return 0;
 384 }
 385
 386 /* mac address reading - from the eeprom */
 387 #if 0
 388 static void technisat_usb2_eeprom_dump(struct dvb_usb_device *d)
 389 {
 390         u8 reg;
 391         u8 b[16];
 392         int i, j;
 393
 394         /* full EEPROM dump */
 395         for (j = 0; j < 256 * 4; j += 16) {
 396                 reg = j;
 397                 if (technisat_usb2_i2c_access(d->udev, 0x50 + j / 256, &reg, 1, b, 16) != 0)
 398                         break;
 399
 400                 deb_eeprom("EEPROM: %01x%02x: ", j / 256, reg);
 401                 for (i = 0; i < 16; i++)
 402                         deb_eeprom("%02x ", b[i]);
 403                 deb_eeprom("\n");
 404         }
 405 }
 406 #endif
 407
 408 static u8 technisat_usb2_calc_lrc(const u8 *b, u16 length)
 409 {
 410         u8 lrc = 0;
 411         while (--length)
 412                 lrc ^= *b++;
 413         return lrc;
 414 }
 415
 416 static int technisat_usb2_eeprom_lrc_read(struct dvb_usb_device *d,
 417         u16 offset, u8 *b, u16 length, u8 tries)
 418 {
 419         u8 bo = offset & 0xff;
 420         struct i2c_msg msg[] = {
 421                 {
 422                         .addr = 0x50 | ((offset >> 8) & 0x3),
 423                         .buf = &bo,
 424                         .len = 1
 425                 }, {
 426                         .addr = 0x50 | ((offset >> 8) & 0x3),
 427                         .flags  = I2C_M_RD,
 428                         .buf = b,
 429                         .len = length
 430                 }
 431         };
 432
 433         while (tries--) {
 434                 int status;
 435
 436                 if (i2c_transfer(&d->i2c_adap, msg, 2) != 2)
 437                         break;
 438
 439                 status =
 440                         technisat_usb2_calc_lrc(b, length - 1) == b[length - 1];
 441
 442                 if (status)
 443                         return 0;
 444         }
 445
 446         return -EREMOTEIO;
 447 }
 448
 449 #define EEPROM_MAC_START 0x3f8
 450 #define EEPROM_MAC_TOTAL 8
 451 static int technisat_usb2_read_mac_address(struct dvb_usb_device *d,
 452                 u8 mac[])
 453 {
 454         u8 buf[EEPROM_MAC_TOTAL];
 455
 456         if (technisat_usb2_eeprom_lrc_read(d, EEPROM_MAC_START,
 457                                 buf, EEPROM_MAC_TOTAL, 4) != 0)
 458                 return -ENODEV;
 459
 460         memcpy(mac, buf, 6);
 461         return 0;
 462 }
 463
 464 static struct stv090x_config technisat_usb2_stv090x_config;
 465
 466 /* frontend attach */
 467 static int technisat_usb2_set_voltage(struct dvb_frontend *fe,
 468                                       enum fe_sec_voltage voltage)
 469 {
 470         int i;
 471         u8 gpio[3] = { 0 }; /* 0 = 2, 1 = 3, 2 = 4 */
 472
 473         gpio[2] = 1; /* high - voltage ? */
 474
 475         switch (voltage) {
 476         case SEC_VOLTAGE_13:
 477                 gpio[0] = 1;
 478                 break;
 479         case SEC_VOLTAGE_18:
 480                 gpio[0] = 1;
 481                 gpio[1] = 1;
 482                 break;
 483         default:
 484         case SEC_VOLTAGE_OFF:
 485                 break;
 486         }
 487
 488         for (i = 0; i < 3; i++)
 489                 if (technisat_usb2_stv090x_config.set_gpio(fe, i+2, 0,
 490                                                            gpio[i], 0) != 0)
 491                         return -EREMOTEIO;
 492         return 0;
 493 }
 494
 495 static struct stv090x_config technisat_usb2_stv090x_config = {
 496         .device         = STV0903,
 497         .demod_mode     = STV090x_SINGLE,
 498         .clk_mode       = STV090x_CLK_EXT,
 499
 500         .xtal           = 8000000,
 501         .address        = 0x68,
 502
 503         .ts1_mode       = STV090x_TSMODE_DVBCI,
 504         .ts1_clk        = 13400000,
 505         .ts1_tei        = 1,
 506
 507         .repeater_level = STV090x_RPTLEVEL_64,
 508
 509         .tuner_bbgain   = 6,
 510 };
 511
 512 static struct stv6110x_config technisat_usb2_stv6110x_config = {
 513         .addr           = 0x60,
 514         .refclk         = 16000000,
 515         .clk_div        = 2,
 516 };
 517
 518 static int technisat_usb2_frontend_attach(struct dvb_usb_adapter *a)
 519 {
 520         struct usb_device *udev = a->dev->udev;
 521         int ret;
 522
 523         a->fe_adap[0].fe = dvb_attach(stv090x_attach, &technisat_usb2_stv090x_config,
 524                         &a->dev->i2c_adap, STV090x_DEMODULATOR_0);
 525
 526         if (a->fe_adap[0].fe) {
 527                 const struct stv6110x_devctl *ctl;
 528
 529                 ctl = dvb_attach(stv6110x_attach,
 530                                 a->fe_adap[0].fe,
 531                                 &technisat_usb2_stv6110x_config,
 532                                 &a->dev->i2c_adap);
 533
 534                 if (ctl) {
 535                         technisat_usb2_stv090x_config.tuner_init          = ctl->tuner_init;
 536                         technisat_usb2_stv090x_config.tuner_sleep         = ctl->tuner_sleep;
 537                         technisat_usb2_stv090x_config.tuner_set_mode      = ctl->tuner_set_mode;
 538                         technisat_usb2_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
 539                         technisat_usb2_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
 540                         technisat_usb2_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
 541                         technisat_usb2_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
 542                         technisat_usb2_stv090x_config.tuner_set_bbgain    = ctl->tuner_set_bbgain;
 543                         technisat_usb2_stv090x_config.tuner_get_bbgain    = ctl->tuner_get_bbgain;
 544                         technisat_usb2_stv090x_config.tuner_set_refclk    = ctl->tuner_set_refclk;
 545                         technisat_usb2_stv090x_config.tuner_get_status    = ctl->tuner_get_status;
 546
 547                         /* call the init function once to initialize
 548                            tuner's clock output divider and demod's
 549                            master clock */
 550                         if (a->fe_adap[0].fe->ops.init)
 551                                 a->fe_adap[0].fe->ops.init(a->fe_adap[0].fe);
 552
 553                         if (mutex_lock_interruptible(&a->dev->i2c_mutex) < 0)
 554                                 return -EAGAIN;
 555
 556                         ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 557                                         SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST,
 558                                         USB_TYPE_VENDOR | USB_DIR_OUT,
 559                                         0, 0,
 560                                         NULL, 0, 500);
 561                         mutex_unlock(&a->dev->i2c_mutex);
 562
 563                         if (ret != 0)
 564                                 err("could not set IF_CLK to external");
 565
 566                         a->fe_adap[0].fe->ops.set_voltage = technisat_usb2_set_voltage;
 567
 568                         /* if everything was successful assign a nice name to the frontend */
 569                         strlcpy(a->fe_adap[0].fe->ops.info.name, a->dev->desc->name,
 570                                         sizeof(a->fe_adap[0].fe->ops.info.name));
 571                 } else {
 572                         dvb_frontend_detach(a->fe_adap[0].fe);
 573                         a->fe_adap[0].fe = NULL;
 574                 }
 575         }
 576
 577         technisat_usb2_set_led_timer(a->dev, 1, 1);
 578
 579         return a->fe_adap[0].fe == NULL ? -ENODEV : 0;
 580 }
 581
 582 /* Remote control */
 583
 584 /* the device is giving providing raw IR-signals to the host mapping
 585  * it only to one remote control is just the default implementation
 586  */
 587 #define NOMINAL_IR_BIT_TRANSITION_TIME_US 889
 588 #define NOMINAL_IR_BIT_TIME_US (2 * NOMINAL_IR_BIT_TRANSITION_TIME_US)
 589
 590 #define FIRMWARE_CLOCK_TICK 83333
 591 #define FIRMWARE_CLOCK_DIVISOR 256
 592
 593 #define IR_PERCENT_TOLERANCE 15
 594
 595 #define NOMINAL_IR_BIT_TRANSITION_TICKS ((NOMINAL_IR_BIT_TRANSITION_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK)
 596 #define NOMINAL_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICKS / FIRMWARE_CLOCK_DIVISOR)
 597
 598 #define NOMINAL_IR_BIT_TIME_TICKS ((NOMINAL_IR_BIT_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK)
 599 #define NOMINAL_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICKS / FIRMWARE_CLOCK_DIVISOR)
 600
 601 #define MINIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT - ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
 602 #define MAXIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT + ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
 603
 604 #define MINIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT - ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
 605 #define MAXIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT + ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
 606
 607 static int technisat_usb2_get_ir(struct dvb_usb_device *d)
 608 {
 609         struct technisat_usb2_state *state = d->priv;
 610         struct ir_raw_event ev;
 611         u8 *buf = state->buf;
 612         int i, ret;
 613
 614         buf[0] = GET_IR_DATA_VENDOR_REQUEST;
 615         buf[1] = 0x08;
 616         buf[2] = 0x8f;
 617         buf[3] = MINIMUM_IR_BIT_TRANSITION_TICK_COUNT;
 618         buf[4] = MAXIMUM_IR_BIT_TIME_TICK_COUNT;
 619
 620         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 621                 return -EAGAIN;
 622         ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
 623                         GET_IR_DATA_VENDOR_REQUEST,
 624                         USB_TYPE_VENDOR | USB_DIR_OUT,
 625                         0, 0,
 626                         buf, 5, 500);
 627         if (ret < 0)
 628                 goto unlock;
 629
 630         buf[1] = 0;
 631         buf[2] = 0;
 632         ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
 633                         GET_IR_DATA_VENDOR_REQUEST,
 634                         USB_TYPE_VENDOR | USB_DIR_IN,
 635                         0x8080, 0,
 636                         buf, 62, 500);
 637
 638 unlock:
 639         mutex_unlock(&d->i2c_mutex);
 640
 641         if (ret < 0)
 642                 return ret;
 643
 644         if (ret == 1)
 645                 return 0; /* no key pressed */
 646
 647         /* decoding */
 648
 649 #if 0
 650         deb_rc("RC: %d ", ret);
 651         debug_dump(buf + 1, ret, deb_rc);
 652 #endif
 653
 654         ev.pulse = 0;
 655         for (i = 1; i < ARRAY_SIZE(state->buf); i++) {
 656                 if (buf[i] == 0xff) {
 657                         ev.pulse = 0;
 658                         ev.duration = 888888*2;
 659                         ir_raw_event_store(d->rc_dev, &ev);
 660                         break;
 661                 }
 662
 663                 ev.pulse = !ev.pulse;
 664                 ev.duration = (buf[i] * FIRMWARE_CLOCK_DIVISOR *
 665                                FIRMWARE_CLOCK_TICK) / 1000;
 666                 ir_raw_event_store(d->rc_dev, &ev);
 667         }
 668
 669         ir_raw_event_handle(d->rc_dev);
 670
 671         return 1;
 672 }
 673
 674 static int technisat_usb2_rc_query(struct dvb_usb_device *d)
 675 {
 676         int ret = technisat_usb2_get_ir(d);
 677
 678         if (ret < 0)
 679                 return ret;
 680
 681         if (ret == 0)
 682                 return 0;
 683
 684         if (!disable_led_control)
 685                 technisat_usb2_set_led(d, 1, TECH_LED_BLINK);
 686
 687         return 0;
 688 }
 689
 690 /* DVB-USB and USB stuff follows */
 691 static struct usb_device_id technisat_usb2_id_table[] = {
 692         { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_DVB_S2) },
 693         { 0 }           /* Terminating entry */
 694 };
 695 MODULE_DEVICE_TABLE(usb, technisat_usb2_id_table);
 696
 697 /* device description */
 698 static struct dvb_usb_device_properties technisat_usb2_devices = {
 699         .caps              = DVB_USB_IS_AN_I2C_ADAPTER,
 700
 701         .usb_ctrl          = CYPRESS_FX2,
 702
 703         .identify_state    = technisat_usb2_identify_state,
 704         .firmware          = "/*(DEBLOBBED)*/",
 705
 706         .size_of_priv      = sizeof(struct technisat_usb2_state),
 707
 708         .i2c_algo          = &technisat_usb2_i2c_algo,
 709
 710         .power_ctrl        = technisat_usb2_power_ctrl,
 711         .read_mac_address  = technisat_usb2_read_mac_address,
 712
 713         .num_adapters = 1,
 714         .adapter = {
 715                 {
 716                 .num_frontends = 1,
 717                 .fe = {{
 718                         .frontend_attach  = technisat_usb2_frontend_attach,
 719
 720                         .stream = {
 721                                 .type = USB_ISOC,
 722                                 .count = 4,
 723                                 .endpoint = 0x2,
 724                                 .u = {
 725                                         .isoc = {
 726                                                 .framesperurb = 32,
 727                                                 .framesize = 2048,
 728                                                 .interval = 1,
 729                                         }
 730                                 }
 731                         },
 732                 }},
 733                         .size_of_priv = 0,
 734                 },
 735         },
 736
 737         .num_device_descs = 1,
 738         .devices = {
 739                 {   "Technisat SkyStar USB HD (DVB-S/S2)",
 740                         { &technisat_usb2_id_table[0], NULL },
 741                         { NULL },
 742                 },
 743         },
 744
 745         .rc.core = {
 746                 .rc_interval = 100,
 747                 .rc_codes    = RC_MAP_TECHNISAT_USB2,
 748                 .module_name = "technisat-usb2",
 749                 .rc_query    = technisat_usb2_rc_query,
 750                 .allowed_protos = RC_PROTO_BIT_ALL_IR_DECODER,
 751                 .driver_type    = RC_DRIVER_IR_RAW,
 752         }
 753 };
 754
 755 static int technisat_usb2_probe(struct usb_interface *intf,
 756                 const struct usb_device_id *id)
 757 {
 758         struct dvb_usb_device *dev;
 759
 760         if (dvb_usb_device_init(intf, &technisat_usb2_devices, THIS_MODULE,
 761                                 &dev, adapter_nr) != 0)
 762                 return -ENODEV;
 763
 764         if (dev) {
 765                 struct technisat_usb2_state *state = dev->priv;
 766                 state->dev = dev;
 767
 768                 if (!disable_led_control) {
 769                         INIT_DELAYED_WORK(&state->green_led_work,
 770                                         technisat_usb2_green_led_control);
 771                         schedule_delayed_work(&state->green_led_work,
 772                                         msecs_to_jiffies(500));
 773                 }
 774         }
 775
 776         return 0;
 777 }
 778
 779 static void technisat_usb2_disconnect(struct usb_interface *intf)
 780 {
 781         struct dvb_usb_device *dev = usb_get_intfdata(intf);
 782
 783         /* work and stuff was only created when the device is is hot-state */
 784         if (dev != NULL) {
 785                 struct technisat_usb2_state *state = dev->priv;
 786                 if (state != NULL)
 787                         cancel_delayed_work_sync(&state->green_led_work);
 788         }
 789
 790         dvb_usb_device_exit(intf);
 791 }
 792
 793 static struct usb_driver technisat_usb2_driver = {
 794         .name       = "dvb_usb_technisat_usb2",
 795         .probe      = technisat_usb2_probe,
 796         .disconnect = technisat_usb2_disconnect,
 797         .id_table   = technisat_usb2_id_table,
 798 };
 799
 800 module_usb_driver(technisat_usb2_driver);
 801
 802 MODULE_AUTHOR("Patrick Boettcher <pboettcher@kernellabs.com>");
 803 MODULE_DESCRIPTION("Driver for Technisat DVB-S/S2 USB 2.0 device");
 804 MODULE_VERSION("1.0");
 805 MODULE_LICENSE("GPL");