1 /* Linux driver for devices based on the DiBcom DiB0700 USB bridge
3 * This program is free software; you can redistribute it and/or modify it
4 * under the terms of the GNU General Public License as published by the Free
5 * Software Foundation, version 2.
7 * Copyright (C) 2005-9 DiBcom, SA et al
11 #include "dib3000mc.h"
18 #include "tuner-xc2028.h"
27 static int force_lna_activation;
28 module_param(force_lna_activation, int, 0644);
29 MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
30 "if applicable for the device (default: 0=automatic/off).");
32 struct dib0700_adapter_state {
33 int (*set_param_save) (struct dvb_frontend *);
34 const struct firmware *frontend_firmware;
35 struct dib7000p_ops dib7000p_ops;
36 struct dib8000_ops dib8000_ops;
39 /* Hauppauge Nova-T 500 (aka Bristol)
40 * has a LNA on GPIO0 which is enabled by setting 1 */
41 static struct mt2060_config bristol_mt2060_config[2] = {
51 static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
52 .band_caps = BAND_VHF | BAND_UHF,
53 .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
73 static struct dib3000mc_config bristol_dib3000mc_config[2] = {
74 { .agc = &bristol_dib3000p_mt2060_agc_config,
76 .ln_adc_level = 0x1cc7,
77 .output_mpeg2_in_188_bytes = 1,
79 { .agc = &bristol_dib3000p_mt2060_agc_config,
81 .ln_adc_level = 0x1cc7,
82 .output_mpeg2_in_188_bytes = 1,
86 static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
88 struct dib0700_state *st = adap->dev->priv;
90 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
91 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
92 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
93 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
95 if (force_lna_activation)
96 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
98 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
100 if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
101 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
105 st->mt2060_if1[adap->id] = 1220;
106 return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
107 (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
110 static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
112 struct i2c_msg msg[2] = {
113 { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 },
114 { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 },
116 if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
120 static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
122 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
123 struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
126 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
127 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
128 if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
130 return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c,
131 &bristol_mt2060_config[adap->id], if1) == NULL ?
135 /* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
138 static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
142 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
143 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
144 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
145 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
180 BAND_VHF | BAND_LBAND,
182 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
183 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
184 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
185 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
222 static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
235 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
240 static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
241 { .output_mpeg2_in_188_bytes = 1,
242 .hostbus_diversity = 1,
243 .tuner_is_baseband = 1,
245 .agc_config_count = 2,
246 .agc = stk7700d_7000p_mt2266_agc_config,
247 .bw = &stk7700d_mt2266_pll_config,
249 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
250 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
251 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
253 { .output_mpeg2_in_188_bytes = 1,
254 .hostbus_diversity = 1,
255 .tuner_is_baseband = 1,
257 .agc_config_count = 2,
258 .agc = stk7700d_7000p_mt2266_agc_config,
259 .bw = &stk7700d_mt2266_pll_config,
261 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
262 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
263 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
267 static struct mt2266_config stk7700d_mt2266_config[2] = {
268 { .i2c_address = 0x60
270 { .i2c_address = 0x60
274 static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
276 struct dib0700_adapter_state *state = adap->priv;
278 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
282 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
284 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
285 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
286 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
287 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
289 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
291 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
292 stk7700d_dib7000p_mt2266_config)
294 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
295 dvb_detach(state->dib7000p_ops.set_wbd_ref);
300 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
301 0x80 + (adap->id << 1),
302 &stk7700d_dib7000p_mt2266_config[adap->id]);
304 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
307 static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
309 struct dib0700_adapter_state *state = adap->priv;
311 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
315 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
317 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
318 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
319 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
320 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
322 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
324 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
325 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
326 stk7700d_dib7000p_mt2266_config)
328 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
329 dvb_detach(state->dib7000p_ops.set_wbd_ref);
334 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
335 0x80 + (adap->id << 1),
336 &stk7700d_dib7000p_mt2266_config[adap->id]);
338 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
341 static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
343 struct i2c_adapter *tun_i2c;
344 struct dib0700_adapter_state *state = adap->priv;
346 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
347 DIBX000_I2C_INTERFACE_TUNER, 1);
348 return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c,
349 &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
352 /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
353 static struct dibx000_agc_config xc3028_agc_config = {
354 .band_caps = BAND_VHF | BAND_UHF,
355 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
356 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
357 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
358 .setup = (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
384 .perform_agc_softsplit = 1,
387 /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
388 static struct dibx000_bandwidth_config xc3028_bw_config = {
401 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
402 .ifreq = (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
407 static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
408 .output_mpeg2_in_188_bytes = 1,
409 .tuner_is_baseband = 1,
411 .agc_config_count = 1,
412 .agc = &xc3028_agc_config,
413 .bw = &xc3028_bw_config,
415 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
416 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
417 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
420 static int stk7700ph_xc3028_callback(void *ptr, int component,
421 int command, int arg)
423 struct dvb_usb_adapter *adap = ptr;
424 struct dib0700_adapter_state *state = adap->priv;
427 case XC2028_TUNER_RESET:
428 /* Send the tuner in then out of reset */
429 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
431 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
433 case XC2028_RESET_CLK:
434 case XC2028_I2C_FLUSH:
437 err("%s: unknown command %d, arg %d\n", __func__,
444 static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
445 .fname = "/*(DEBLOBBED)*/",
447 .demod = XC3028_FE_DIBCOM52,
450 static struct xc2028_config stk7700ph_xc3028_config = {
452 .ctrl = &stk7700ph_xc3028_ctrl,
455 static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
457 struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
458 struct dib0700_adapter_state *state = adap->priv;
460 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
463 if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
464 desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
465 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
467 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
469 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
470 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
471 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
472 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
474 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
476 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
479 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
480 &stk7700ph_dib7700_xc3028_config) != 0) {
481 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
483 dvb_detach(state->dib7000p_ops.set_wbd_ref);
487 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
488 &stk7700ph_dib7700_xc3028_config);
490 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
493 static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
495 struct i2c_adapter *tun_i2c;
496 struct dib0700_adapter_state *state = adap->priv;
498 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
499 DIBX000_I2C_INTERFACE_TUNER, 1);
501 stk7700ph_xc3028_config.i2c_adap = tun_i2c;
503 /* FIXME: generalize & move to common area */
504 adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback;
506 return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config)
507 == NULL ? -ENODEV : 0;
510 #define DEFAULT_RC_INTERVAL 50
512 static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
515 * This function is used only when firmware is < 1.20 version. Newer
516 * firmwares use bulk mode, with functions implemented at dib0700_core,
517 * at dib0700_rc_urb_completion()
519 static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
522 enum rc_type protocol;
526 struct dib0700_state *st = d->priv;
528 if (st->fw_version >= 0x10200) {
529 /* For 1.20 firmware , We need to keep the RC polling
530 callback so we can reuse the input device setup in
531 dvb-usb-remote.c. However, the actual work is being done
532 in the bulk URB completion handler. */
536 i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
538 err("RC Query Failed");
542 /* losing half of KEY_0 events from Philipps rc5 remotes.. */
543 if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
546 /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */
548 dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */
550 switch (d->props.rc.core.protocol) {
552 /* NEC protocol sends repeat code as 0 0 0 FF */
553 if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
555 rc_repeat(d->rc_dev);
559 protocol = RC_TYPE_NEC;
560 scancode = RC_SCANCODE_NEC(key[3-2], key[3-3]);
565 /* RC-5 protocol changes toggle bit on new keypress */
566 protocol = RC_TYPE_RC5;
567 scancode = RC_SCANCODE_RC5(key[3-2], key[3-3]);
572 rc_keydown(d->rc_dev, protocol, scancode, toggle);
576 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
577 static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
580 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
581 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
582 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
583 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
623 static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
624 .band_caps = BAND_UHF | BAND_VHF,
625 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
626 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
627 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
653 .perform_agc_softsplit = 0,
656 static struct dibx000_bandwidth_config stk7700p_pll_config = {
669 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
675 static struct dib7000m_config stk7700p_dib7000m_config = {
677 .output_mpeg2_in_188_bytes = 1,
680 .agc_config_count = 1,
681 .agc = &stk7700p_7000m_mt2060_agc_config,
682 .bw = &stk7700p_pll_config,
684 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
685 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
686 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
689 static struct dib7000p_config stk7700p_dib7000p_config = {
690 .output_mpeg2_in_188_bytes = 1,
692 .agc_config_count = 1,
693 .agc = &stk7700p_7000p_mt2060_agc_config,
694 .bw = &stk7700p_pll_config,
696 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
697 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
698 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
701 static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
703 struct dib0700_state *st = adap->dev->priv;
704 struct dib0700_adapter_state *state = adap->priv;
706 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
709 /* unless there is no real power management in DVB - we leave the device on GPIO6 */
711 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
712 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
714 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
715 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
717 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
718 dib0700_ctrl_clock(adap->dev, 72, 1);
719 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
721 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
723 st->mt2060_if1[0] = 1220;
725 if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap)) {
726 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
727 st->is_dib7000pc = 1;
729 memset(&state->dib7000p_ops, 0, sizeof(state->dib7000p_ops));
730 adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
733 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
736 static struct mt2060_config stk7700p_mt2060_config = {
740 static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
742 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
743 struct dib0700_state *st = adap->dev->priv;
744 struct i2c_adapter *tun_i2c;
745 struct dib0700_adapter_state *state = adap->priv;
749 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
750 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
751 if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
753 if (st->is_dib7000pc)
754 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
756 tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
758 return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config,
759 if1) == NULL ? -ENODEV : 0;
762 /* DIB7070 generic */
763 static struct dibx000_agc_config dib7070_agc_config = {
764 .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
765 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
766 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
767 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
793 .perform_agc_softsplit = 0,
796 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
798 struct dvb_usb_adapter *adap = fe->dvb->priv;
799 struct dib0700_adapter_state *state = adap->priv;
801 deb_info("reset: %d", onoff);
802 return state->dib7000p_ops.set_gpio(fe, 8, 0, !onoff);
805 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
807 struct dvb_usb_adapter *adap = fe->dvb->priv;
808 struct dib0700_adapter_state *state = adap->priv;
810 deb_info("sleep: %d", onoff);
811 return state->dib7000p_ops.set_gpio(fe, 9, 0, onoff);
814 static struct dib0070_config dib7070p_dib0070_config[2] = {
816 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
817 .reset = dib7070_tuner_reset,
818 .sleep = dib7070_tuner_sleep,
820 .clock_pad_drive = 4,
823 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
824 .reset = dib7070_tuner_reset,
825 .sleep = dib7070_tuner_sleep,
831 static struct dib0070_config dib7770p_dib0070_config = {
832 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
833 .reset = dib7070_tuner_reset,
834 .sleep = dib7070_tuner_sleep,
836 .clock_pad_drive = 0,
841 static int dib7070_set_param_override(struct dvb_frontend *fe)
843 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
844 struct dvb_usb_adapter *adap = fe->dvb->priv;
845 struct dib0700_adapter_state *state = adap->priv;
848 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
850 case BAND_VHF: offset = 950; break;
852 default: offset = 550; break;
854 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
855 state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
856 return state->set_param_save(fe);
859 static int dib7770_set_param_override(struct dvb_frontend *fe)
861 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
862 struct dvb_usb_adapter *adap = fe->dvb->priv;
863 struct dib0700_adapter_state *state = adap->priv;
866 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
869 state->dib7000p_ops.set_gpio(fe, 0, 0, 1);
874 state->dib7000p_ops.set_gpio(fe, 0, 0, 0);
878 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
879 state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
880 return state->set_param_save(fe);
883 static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
885 struct dib0700_adapter_state *st = adap->priv;
886 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
887 DIBX000_I2C_INTERFACE_TUNER, 1);
889 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
890 &dib7770p_dib0070_config) == NULL)
893 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
894 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override;
898 static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
900 struct dib0700_adapter_state *st = adap->priv;
901 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
904 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
907 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
911 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
912 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
916 static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index,
919 struct dib0700_adapter_state *state = adapter->priv;
920 struct dib0700_state *st = adapter->dev->priv;
922 if (st->is_dib7000pc)
923 return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
924 return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
927 static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
929 struct dib0700_state *st = adapter->dev->priv;
930 struct dib0700_adapter_state *state = adapter->priv;
931 if (st->is_dib7000pc)
932 return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
933 return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
936 static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
938 struct dib0700_adapter_state *state = adapter->priv;
939 return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
942 static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
944 struct dib0700_adapter_state *state = adapter->priv;
945 return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
948 static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
961 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
962 .ifreq = (0 << 25) | 0,
967 static struct dib7000p_config dib7070p_dib7000p_config = {
968 .output_mpeg2_in_188_bytes = 1,
970 .agc_config_count = 1,
971 .agc = &dib7070_agc_config,
972 .bw = &dib7070_bw_config_12_mhz,
973 .tuner_is_baseband = 1,
976 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
977 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
978 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
980 .hostbus_diversity = 1,
984 static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
986 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
987 struct dib0700_adapter_state *state = adap->priv;
989 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
992 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
993 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
994 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
996 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
998 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
999 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1000 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1001 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1003 dib0700_ctrl_clock(adap->dev, 72, 1);
1006 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1008 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1010 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1011 &dib7070p_dib7000p_config) != 0) {
1012 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
1014 dvb_detach(state->dib7000p_ops.set_wbd_ref);
1018 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
1019 &dib7070p_dib7000p_config);
1020 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1024 static struct dib7000p_config dib7770p_dib7000p_config = {
1025 .output_mpeg2_in_188_bytes = 1,
1027 .agc_config_count = 1,
1028 .agc = &dib7070_agc_config,
1029 .bw = &dib7070_bw_config_12_mhz,
1030 .tuner_is_baseband = 1,
1033 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
1034 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
1035 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
1037 .hostbus_diversity = 1,
1038 .enable_current_mirror = 1,
1039 .disable_sample_and_hold = 0,
1042 static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
1044 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
1045 struct dib0700_adapter_state *state = adap->priv;
1047 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
1050 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
1051 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
1052 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1054 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1056 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1057 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1058 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1059 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1061 dib0700_ctrl_clock(adap->dev, 72, 1);
1064 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1066 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1068 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1069 &dib7770p_dib7000p_config) != 0) {
1070 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
1072 dvb_detach(state->dib7000p_ops.set_wbd_ref);
1076 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
1077 &dib7770p_dib7000p_config);
1078 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1081 /* DIB807x generic */
1082 static struct dibx000_agc_config dib807x_agc_config[2] = {
1085 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1086 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1087 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
1088 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1090 (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
1091 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
1092 (0 << 0), /* setup*/
1095 10, /* time_stabiliz*/
1105 65535, /* agc1_max*/
1108 65535, /* agc2_max*/
1114 206, /* agc1_slope1*/
1115 255, /* agc1_slope2*/
1118 88, /* agc2_slope1*/
1119 90, /* agc2_slope2*/
1126 0, /* perform_agc_softsplit*/
1129 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1130 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1131 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1132 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1134 (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
1135 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
1136 (0 << 0), /* setup */
1139 10, /* time_stabiliz*/
1149 65535, /* agc1_max*/
1152 65535, /* agc2_max*/
1158 206, /* agc1_slope1*/
1159 255, /* agc1_slope2*/
1162 88, /* agc2_slope1*/
1163 90, /* agc2_slope2*/
1170 0, /* perform_agc_softsplit*/
1174 static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
1184 .IO_CLK_en_core = 1,
1187 .sad_cfg = (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
1188 .ifreq = (0 << 25) | 0, /* ifreq = 0.000000 MHz*/
1190 .xtal_hz = 12000000,
1193 static struct dib8000_config dib807x_dib8000_config[2] = {
1195 .output_mpeg2_in_188_bytes = 1,
1197 .agc_config_count = 2,
1198 .agc = dib807x_agc_config,
1199 .pll = &dib807x_bw_config_12_mhz,
1200 .tuner_is_baseband = 1,
1202 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1203 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1204 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1206 .hostbus_diversity = 1,
1208 .agc_control = &dib0070_ctrl_agc_filter,
1209 .output_mode = OUTMODE_MPEG2_FIFO,
1212 .output_mpeg2_in_188_bytes = 1,
1214 .agc_config_count = 2,
1215 .agc = dib807x_agc_config,
1216 .pll = &dib807x_bw_config_12_mhz,
1217 .tuner_is_baseband = 1,
1219 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1220 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1221 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1223 .hostbus_diversity = 1,
1224 .agc_control = &dib0070_ctrl_agc_filter,
1225 .output_mode = OUTMODE_MPEG2_FIFO,
1230 static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
1232 struct dvb_usb_adapter *adap = fe->dvb->priv;
1233 struct dib0700_adapter_state *state = adap->priv;
1235 return state->dib8000_ops.set_gpio(fe, 5, 0, !onoff);
1238 static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
1240 struct dvb_usb_adapter *adap = fe->dvb->priv;
1241 struct dib0700_adapter_state *state = adap->priv;
1243 return state->dib8000_ops.set_gpio(fe, 0, 0, onoff);
1246 static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
1251 static struct dib0070_config dib807x_dib0070_config[2] = {
1253 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1254 .reset = dib80xx_tuner_reset,
1255 .sleep = dib80xx_tuner_sleep,
1257 .clock_pad_drive = 4,
1259 .force_crystal_mode = 1,
1260 .enable_third_order_filter = 1,
1262 .wbd_gain = dib8070_wbd_gain_cfg,
1263 .osc_buffer_state = 0,
1264 .freq_offset_khz_uhf = -100,
1265 .freq_offset_khz_vhf = -100,
1267 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1268 .reset = dib80xx_tuner_reset,
1269 .sleep = dib80xx_tuner_sleep,
1271 .clock_pad_drive = 2,
1273 .force_crystal_mode = 1,
1274 .enable_third_order_filter = 1,
1276 .wbd_gain = dib8070_wbd_gain_cfg,
1277 .osc_buffer_state = 0,
1278 .freq_offset_khz_uhf = -25,
1279 .freq_offset_khz_vhf = -25,
1283 static int dib807x_set_param_override(struct dvb_frontend *fe)
1285 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
1286 struct dvb_usb_adapter *adap = fe->dvb->priv;
1287 struct dib0700_adapter_state *state = adap->priv;
1289 u16 offset = dib0070_wbd_offset(fe);
1290 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
1295 case BAND_UHF: /* fall-thru wanted */
1297 offset += 250; break;
1299 deb_info("WBD for DiB8000: %d\n", offset);
1300 state->dib8000_ops.set_wbd_ref(fe, offset);
1302 return state->set_param_save(fe);
1305 static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
1307 struct dib0700_adapter_state *st = adap->priv;
1308 struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe,
1309 DIBX000_I2C_INTERFACE_TUNER, 1);
1311 if (adap->id == 0) {
1312 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
1313 &dib807x_dib0070_config[0]) == NULL)
1316 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
1317 &dib807x_dib0070_config[1]) == NULL)
1321 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1322 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override;
1326 static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
1329 struct dib0700_adapter_state *state = adapter->priv;
1331 return state->dib8000_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
1334 static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
1337 struct dib0700_adapter_state *state = adapter->priv;
1339 return state->dib8000_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
1343 static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
1345 struct dib0700_adapter_state *state = adap->priv;
1347 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1350 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1352 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1353 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1354 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1356 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1358 dib0700_ctrl_clock(adap->dev, 72, 1);
1361 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1363 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1365 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1368 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80,
1369 &dib807x_dib8000_config[0]);
1371 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1375 static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
1377 struct dib0700_adapter_state *state = adap->priv;
1379 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1382 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1384 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1386 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1387 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1388 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1390 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1392 dib0700_ctrl_clock(adap->dev, 72, 1);
1395 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1397 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1399 /* initialize IC 0 */
1400 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0);
1402 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80,
1403 &dib807x_dib8000_config[0]);
1405 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1408 static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
1410 struct dib0700_adapter_state *state = adap->priv;
1412 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1415 /* initialize IC 1 */
1416 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0);
1418 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82,
1419 &dib807x_dib8000_config[1]);
1421 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1425 static struct dibx000_agc_config dib8090_agc_config[2] = {
1427 .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
1428 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
1429 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1430 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1431 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
1432 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1435 .time_stabiliz = 10,
1466 .perform_agc_softsplit = 0,
1469 .band_caps = BAND_CBAND,
1470 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
1471 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1472 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1473 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
1474 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1477 .time_stabiliz = 10,
1508 .perform_agc_softsplit = 0,
1512 static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
1524 .IO_CLK_en_core = 1,
1528 .sad_cfg = (3 << 14) | (1 << 12) | (599 << 0),
1530 .ifreq = (0 << 25) | 0,
1533 .xtal_hz = 12000000,
1536 static int dib8090_get_adc_power(struct dvb_frontend *fe)
1538 struct dvb_usb_adapter *adap = fe->dvb->priv;
1539 struct dib0700_adapter_state *state = adap->priv;
1541 return state->dib8000_ops.get_adc_power(fe, 1);
1544 static void dib8090_agc_control(struct dvb_frontend *fe, u8 restart)
1546 deb_info("AGC control callback: %i\n", restart);
1547 dib0090_dcc_freq(fe, restart);
1549 if (restart == 0) /* before AGC startup */
1550 dib0090_set_dc_servo(fe, 1);
1553 static struct dib8000_config dib809x_dib8000_config[2] = {
1555 .output_mpeg2_in_188_bytes = 1,
1557 .agc_config_count = 2,
1558 .agc = dib8090_agc_config,
1559 .agc_control = dib8090_agc_control,
1560 .pll = &dib8090_pll_config_12mhz,
1561 .tuner_is_baseband = 1,
1563 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1564 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1565 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1567 .hostbus_diversity = 1,
1569 .output_mode = OUTMODE_MPEG2_FIFO,
1571 .diversity_delay = 48,
1574 .output_mpeg2_in_188_bytes = 1,
1576 .agc_config_count = 2,
1577 .agc = dib8090_agc_config,
1578 .agc_control = dib8090_agc_control,
1579 .pll = &dib8090_pll_config_12mhz,
1580 .tuner_is_baseband = 1,
1582 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1583 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1584 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1586 .hostbus_diversity = 1,
1588 .output_mode = OUTMODE_DIVERSITY,
1590 .diversity_delay = 1,
1595 static struct dib0090_wbd_slope dib8090_wbd_table[] = {
1596 /* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */
1597 { 120, 0, 500, 0, 500, 4 }, /* CBAND */
1598 { 170, 0, 450, 0, 450, 4 }, /* CBAND */
1599 { 380, 48, 373, 28, 259, 6 }, /* VHF */
1600 { 860, 34, 700, 36, 616, 6 }, /* high UHF */
1601 { 0xFFFF, 34, 700, 36, 616, 6 }, /* default */
1604 static struct dib0090_config dib809x_dib0090_config = {
1608 .io.pll_loopdiv = 20,
1609 .io.adc_clock_ratio = 8,
1610 .io.pll_int_loop_filt = 0,
1611 .io.clock_khz = 12000,
1612 .reset = dib80xx_tuner_reset,
1613 .sleep = dib80xx_tuner_sleep,
1616 .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
1619 .get_adc_power = dib8090_get_adc_power,
1620 .freq_offset_khz_uhf = -63,
1621 .freq_offset_khz_vhf = -143,
1622 .wbd = dib8090_wbd_table,
1623 .fref_clock_ratio = 6,
1626 static u8 dib8090_compute_pll_parameters(struct dvb_frontend *fe)
1628 u8 optimal_pll_ratio = 20;
1629 u32 freq_adc, ratio, rest, max = 0;
1632 for (pll_ratio = 17; pll_ratio <= 20; pll_ratio++) {
1633 freq_adc = 12 * pll_ratio * (1 << 8) / 16;
1634 ratio = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) / freq_adc;
1635 rest = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) - ratio * freq_adc;
1637 if (rest > freq_adc / 2)
1638 rest = freq_adc - rest;
1639 deb_info("PLL ratio=%i rest=%i\n", pll_ratio, rest);
1640 if ((rest > max) && (rest > 717)) {
1641 optimal_pll_ratio = pll_ratio;
1645 deb_info("optimal PLL ratio=%i\n", optimal_pll_ratio);
1647 return optimal_pll_ratio;
1650 static int dib8096_set_param_override(struct dvb_frontend *fe)
1652 struct dvb_usb_adapter *adap = fe->dvb->priv;
1653 struct dib0700_adapter_state *state = adap->priv;
1654 u8 pll_ratio, band = BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000);
1655 u16 target, ltgain, rf_gain_limit;
1658 enum frontend_tune_state tune_state = CT_SHUTDOWN;
1662 deb_info("Warning : Rf frequency (%iHz) is not in the supported range, using VHF switch ", fe->dtv_property_cache.frequency);
1664 state->dib8000_ops.set_gpio(fe, 3, 0, 1);
1667 state->dib8000_ops.set_gpio(fe, 3, 0, 0);
1671 ret = state->set_param_save(fe);
1675 if (fe->dtv_property_cache.bandwidth_hz != 6000000) {
1676 deb_info("only 6MHz bandwidth is supported\n");
1680 /** Update PLL if needed ratio **/
1681 state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
1683 /** Get optimize PLL ratio to remove spurious **/
1684 pll_ratio = dib8090_compute_pll_parameters(fe);
1685 if (pll_ratio == 17)
1687 else if (pll_ratio == 18)
1689 else if (pll_ratio == 19)
1694 /** Update ratio **/
1695 state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio);
1697 state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, timf);
1699 if (band != BAND_CBAND) {
1700 /* dib0090_get_wbd_target is returning any possible temperature compensated wbd-target */
1701 target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2;
1702 state->dib8000_ops.set_wbd_ref(fe, target);
1705 if (band == BAND_CBAND) {
1706 deb_info("tuning in CBAND - soft-AGC startup\n");
1707 dib0090_set_tune_state(fe, CT_AGC_START);
1710 ret = dib0090_gain_control(fe);
1712 tune_state = dib0090_get_tune_state(fe);
1713 if (tune_state == CT_AGC_STEP_0)
1714 state->dib8000_ops.set_gpio(fe, 6, 0, 1);
1715 else if (tune_state == CT_AGC_STEP_1) {
1716 dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain);
1717 if (rf_gain_limit < 2000) /* activate the external attenuator in case of very high input power */
1718 state->dib8000_ops.set_gpio(fe, 6, 0, 0);
1720 } while (tune_state < CT_AGC_STOP);
1722 deb_info("switching to PWM AGC\n");
1723 dib0090_pwm_gain_reset(fe);
1724 state->dib8000_ops.pwm_agc_reset(fe);
1725 state->dib8000_ops.set_tune_state(fe, CT_DEMOD_START);
1727 /* for everything else than CBAND we are using standard AGC */
1728 deb_info("not tuning in CBAND - standard AGC startup\n");
1729 dib0090_pwm_gain_reset(fe);
1735 static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
1737 struct dib0700_adapter_state *st = adap->priv;
1738 struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1740 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
1743 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1744 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
1748 static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
1750 struct dib0700_adapter_state *state = adap->priv;
1752 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1755 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1757 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1758 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1759 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1761 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1763 dib0700_ctrl_clock(adap->dev, 72, 1);
1766 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1768 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1770 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0);
1772 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
1774 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1777 static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
1779 struct dib0700_adapter_state *st = adap->priv;
1780 struct i2c_adapter *tun_i2c;
1781 struct dvb_frontend *fe_slave = st->dib8000_ops.get_slave_frontend(adap->fe_adap[0].fe, 1);
1784 tun_i2c = st->dib8000_ops.get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1);
1785 if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL)
1787 fe_slave->dvb = adap->fe_adap[0].fe->dvb;
1788 fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override;
1790 tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1791 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
1794 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1795 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
1800 static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap)
1802 struct dvb_frontend *fe_slave;
1803 struct dib0700_adapter_state *state = adap->priv;
1805 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1808 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1810 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1812 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1813 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1814 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1816 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1818 dib0700_ctrl_clock(adap->dev, 72, 1);
1821 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1823 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1825 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0);
1827 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
1828 if (adap->fe_adap[0].fe == NULL)
1831 /* Needed to increment refcount */
1832 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1835 fe_slave = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
1836 state->dib8000_ops.set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
1838 return fe_slave == NULL ? -ENODEV : 0;
1842 static struct dibx000_agc_config dib8096p_agc_config[2] = {
1844 .band_caps = BAND_UHF,
1845 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1846 P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1847 P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1848 P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1850 .setup = (0 << 15) | (0 << 14) | (5 << 11)
1851 | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
1852 | (0 << 4) | (5 << 1) | (0 << 0),
1855 .time_stabiliz = 10,
1886 .perform_agc_softsplit = 0,
1888 .band_caps = BAND_FM | BAND_VHF | BAND_CBAND,
1889 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1890 P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1891 P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1892 P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1894 .setup = (0 << 15) | (0 << 14) | (5 << 11)
1895 | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
1896 | (0 << 4) | (5 << 1) | (0 << 0),
1899 .time_stabiliz = 10,
1930 .perform_agc_softsplit = 0,
1934 static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = {
1944 .IO_CLK_en_core = 0,
1947 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
1948 .ifreq = (0 << 25) | 0,
1950 .xtal_hz = 12000000,
1953 static struct dib8000_config tfe8096p_dib8000_config = {
1954 .output_mpeg2_in_188_bytes = 1,
1955 .hostbus_diversity = 1,
1958 .agc_config_count = 2,
1959 .agc = dib8096p_agc_config,
1960 .pll = &dib8096p_clock_config_12_mhz,
1962 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1963 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1964 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1966 .agc_control = NULL,
1967 .diversity_delay = 48,
1968 .output_mode = OUTMODE_MPEG2_FIFO,
1972 static struct dib0090_wbd_slope dib8096p_wbd_table[] = {
1973 { 380, 81, 850, 64, 540, 4},
1974 { 860, 51, 866, 21, 375, 4},
1975 {1700, 0, 250, 0, 100, 6},
1976 {2600, 0, 250, 0, 100, 6},
1977 { 0xFFFF, 0, 0, 0, 0, 0},
1980 static struct dib0090_config tfe8096p_dib0090_config = {
1981 .io.clock_khz = 12000,
1985 .io.pll_loopdiv = 6,
1986 .io.adc_clock_ratio = 0,
1987 .io.pll_int_loop_filt = 0,
1989 .freq_offset_khz_uhf = -143,
1990 .freq_offset_khz_vhf = -143,
1992 .get_adc_power = dib8090_get_adc_power,
1997 .wbd_vhf_offset = 0,
1998 .wbd_cband_offset = 0,
2002 .fref_clock_ratio = 1,
2004 .ls_cfg_pad_drv = 0,
2008 .force_cband_input = 0,
2011 struct dibx090p_adc {
2012 u32 freq; /* RF freq MHz */
2013 u32 timf; /* New Timf */
2014 u32 pll_loopdiv; /* New prediv */
2015 u32 pll_prediv; /* New loopdiv */
2018 struct dibx090p_best_adc {
2024 static int dib8096p_get_best_sampling(struct dvb_frontend *fe, struct dibx090p_best_adc *adc)
2026 u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
2028 u16 fcp_min = 1900; /* PLL, Minimum Frequency of phase comparator (KHz) */
2029 u16 fcp_max = 20000; /* PLL, Maximum Frequency of phase comparator (KHz) */
2030 u32 fmem_max = 140000; /* 140MHz max SDRAM freq */
2031 u32 fdem_min = 66000;
2032 u32 fcp = 0, fs = 0, fdem = 0, fmem = 0;
2033 u32 harmonic_id = 0;
2036 adc->pll_loopdiv = loopdiv;
2037 adc->pll_prediv = prediv;
2039 deb_info("bandwidth = %d", fe->dtv_property_cache.bandwidth_hz);
2041 /* Find Min and Max prediv */
2042 while ((xtal / max_prediv) >= fcp_min)
2046 min_prediv = max_prediv;
2047 while ((xtal / min_prediv) <= fcp_max) {
2049 if (min_prediv == 1)
2052 deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
2056 for (prediv = min_prediv; prediv < max_prediv; prediv++) {
2057 fcp = xtal / prediv;
2058 if (fcp > fcp_min && fcp < fcp_max) {
2059 for (loopdiv = 1; loopdiv < 64; loopdiv++) {
2060 fmem = ((xtal/prediv) * loopdiv);
2064 /* test min/max system restrictions */
2065 if ((fdem >= fdem_min) && (fmem <= fmem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz / 1000)) {
2067 /* test fs harmonics positions */
2068 for (harmonic_id = (fe->dtv_property_cache.frequency / (1000 * fs)); harmonic_id <= ((fe->dtv_property_cache.frequency / (1000 * fs)) + 1); harmonic_id++) {
2069 if (((fs * harmonic_id) >= (fe->dtv_property_cache.frequency / 1000 - (fe->dtv_property_cache.bandwidth_hz / 2000))) && ((fs * harmonic_id) <= (fe->dtv_property_cache.frequency / 1000 + (fe->dtv_property_cache.bandwidth_hz / 2000)))) {
2076 adc->pll_loopdiv = loopdiv;
2077 adc->pll_prediv = prediv;
2078 adc->timf = (4260880253U / fdem) * (1 << 8);
2079 adc->timf += ((4260880253U % fdem) << 8) / fdem;
2081 deb_info("RF %6d; BW %6d; Xtal %6d; Fmem %6d; Fdem %6d; Fs %6d; Prediv %2d; Loopdiv %2d; Timf %8d;", fe->dtv_property_cache.frequency, fe->dtv_property_cache.bandwidth_hz, xtal, fmem, fdem, fs, prediv, loopdiv, adc->timf);
2091 if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
2096 static int dib8096p_agc_startup(struct dvb_frontend *fe)
2098 struct dvb_usb_adapter *adap = fe->dvb->priv;
2099 struct dib0700_adapter_state *state = adap->priv;
2100 struct dibx000_bandwidth_config pll;
2101 struct dibx090p_best_adc adc;
2105 ret = state->set_param_save(fe);
2108 memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
2110 dib0090_pwm_gain_reset(fe);
2111 /* dib0090_get_wbd_target is returning any possible
2112 temperature compensated wbd-target */
2113 target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
2114 state->dib8000_ops.set_wbd_ref(fe, target);
2116 if (dib8096p_get_best_sampling(fe, &adc) == 0) {
2117 pll.pll_ratio = adc.pll_loopdiv;
2118 pll.pll_prediv = adc.pll_prediv;
2120 dib0700_set_i2c_speed(adap->dev, 200);
2121 state->dib8000_ops.update_pll(fe, &pll, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
2122 state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
2123 dib0700_set_i2c_speed(adap->dev, 1000);
2128 static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap)
2130 struct dib0700_state *st = adap->dev->priv;
2132 struct dib0700_adapter_state *state = adap->priv;
2134 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
2137 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
2138 if (fw_version >= 0x10200)
2139 st->fw_use_new_i2c_api = 1;
2141 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2143 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2144 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2145 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2147 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2149 dib0700_ctrl_clock(adap->dev, 72, 1);
2152 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2154 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2156 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1);
2158 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap,
2159 0x80, &tfe8096p_dib8000_config);
2161 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2164 static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap)
2166 struct dib0700_adapter_state *st = adap->priv;
2167 struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_tuner(adap->fe_adap[0].fe);
2169 tfe8096p_dib0090_config.reset = st->dib8000_ops.tuner_sleep;
2170 tfe8096p_dib0090_config.sleep = st->dib8000_ops.tuner_sleep;
2171 tfe8096p_dib0090_config.wbd = dib8096p_wbd_table;
2173 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
2174 &tfe8096p_dib0090_config) == NULL)
2177 st->dib8000_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
2179 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
2180 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup;
2185 static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
2187 return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
2190 static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
2192 return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
2195 static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff)
2197 return dib9000_set_gpio(fe, 5, 0, !onoff);
2200 static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff)
2202 return dib9000_set_gpio(fe, 0, 0, onoff);
2205 static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len)
2207 u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 };
2209 struct i2c_msg msg[2] = {
2210 {.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2},
2211 {.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2},
2215 dibx000_i2c_set_speed(i2c, 250);
2217 if (i2c_transfer(i2c, msg, 2) != 2)
2220 switch (rb[0] << 8 | rb[1]) {
2222 deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n");
2225 deb_info("Found DiB0170 rev2");
2228 deb_info("Found DiB0190 rev2");
2231 deb_info("DiB01x0 not found");
2235 for (index_data = 0; index_data < len; index_data += 2) {
2236 wb[2] = (data[index_data + 1] >> 8) & 0xff;
2237 wb[3] = (data[index_data + 1]) & 0xff;
2239 if (data[index_data] == 0) {
2240 wb[0] = (data[index_data] >> 8) & 0xff;
2241 wb[1] = (data[index_data]) & 0xff;
2243 if (i2c_transfer(i2c, msg, 2) != 2)
2246 wb[3] |= rb[1] & ~(3 << 4);
2249 wb[0] = (data[index_data] >> 8)&0xff;
2250 wb[1] = (data[index_data])&0xff;
2252 if (i2c_transfer(i2c, &msg[0], 1) != 1)
2258 static struct dib9000_config stk9090m_config = {
2259 .output_mpeg2_in_188_bytes = 1,
2260 .output_mode = OUTMODE_MPEG2_FIFO,
2261 .vcxo_timer = 279620,
2262 .timing_frequency = 20452225,
2263 .demod_clock_khz = 60000,
2264 .xtal_clock_khz = 30000,
2265 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
2269 { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */
2270 { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */
2275 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
2276 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
2280 static struct dib9000_config nim9090md_config[2] = {
2282 .output_mpeg2_in_188_bytes = 1,
2283 .output_mode = OUTMODE_MPEG2_FIFO,
2284 .vcxo_timer = 279620,
2285 .timing_frequency = 20452225,
2286 .demod_clock_khz = 60000,
2287 .xtal_clock_khz = 30000,
2288 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
2290 .output_mpeg2_in_188_bytes = 1,
2291 .output_mode = OUTMODE_DIVERSITY,
2292 .vcxo_timer = 279620,
2293 .timing_frequency = 20452225,
2294 .demod_clock_khz = 60000,
2295 .xtal_clock_khz = 30000,
2296 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
2300 { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */
2301 { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */
2306 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
2307 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
2312 static struct dib0090_config dib9090_dib0090_config = {
2316 .io.pll_loopdiv = 8,
2317 .io.adc_clock_ratio = 8,
2318 .io.pll_int_loop_filt = 0,
2319 .io.clock_khz = 30000,
2320 .reset = dib90x0_tuner_reset,
2321 .sleep = dib90x0_tuner_sleep,
2326 .freq_offset_khz_uhf = 0,
2327 .freq_offset_khz_vhf = 0,
2330 static struct dib0090_config nim9090md_dib0090_config[2] = {
2335 .io.pll_loopdiv = 8,
2336 .io.adc_clock_ratio = 8,
2337 .io.pll_int_loop_filt = 0,
2338 .io.clock_khz = 30000,
2339 .reset = dib90x0_tuner_reset,
2340 .sleep = dib90x0_tuner_sleep,
2345 .freq_offset_khz_uhf = 0,
2346 .freq_offset_khz_vhf = 0,
2351 .io.pll_loopdiv = 8,
2352 .io.adc_clock_ratio = 8,
2353 .io.pll_int_loop_filt = 0,
2354 .io.clock_khz = 30000,
2355 .reset = dib90x0_tuner_reset,
2356 .sleep = dib90x0_tuner_sleep,
2361 .freq_offset_khz_uhf = 0,
2362 .freq_offset_khz_vhf = 0,
2367 static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap)
2369 struct dib0700_adapter_state *state = adap->priv;
2370 struct dib0700_state *st = adap->dev->priv;
2373 /* Make use of the new i2c functions from FW 1.20 */
2374 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
2375 if (fw_version >= 0x10200)
2376 st->fw_use_new_i2c_api = 1;
2377 dib0700_set_i2c_speed(adap->dev, 340);
2379 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2381 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2382 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2383 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2384 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2386 dib0700_ctrl_clock(adap->dev, 72, 1);
2389 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2391 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2393 dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80);
2395 if (reject_firmware(&state->frontend_firmware, "/*(DEBLOBBED)*/", &adap->dev->udev->dev)) {
2396 deb_info("%s: Upload failed. (file not found?)\n", __func__);
2399 deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size);
2401 stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size;
2402 stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data;
2404 adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config);
2406 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2409 static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
2411 struct dib0700_adapter_state *state = adap->priv;
2412 struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
2413 u16 data_dib190[10] = {
2421 if (!IS_ENABLED(CONFIG_DVB_DIB9000))
2423 if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
2425 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
2428 if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
2430 dib0700_set_i2c_speed(adap->dev, 1500);
2431 if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
2433 release_firmware(state->frontend_firmware);
2437 static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap)
2439 struct dib0700_adapter_state *state = adap->priv;
2440 struct dib0700_state *st = adap->dev->priv;
2441 struct i2c_adapter *i2c;
2442 struct dvb_frontend *fe_slave;
2445 /* Make use of the new i2c functions from FW 1.20 */
2446 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
2447 if (fw_version >= 0x10200)
2448 st->fw_use_new_i2c_api = 1;
2449 dib0700_set_i2c_speed(adap->dev, 340);
2451 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2453 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2454 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2455 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2456 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2458 dib0700_ctrl_clock(adap->dev, 72, 1);
2461 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2463 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2465 if (reject_firmware(&state->frontend_firmware, "/*(DEBLOBBED)*/", &adap->dev->udev->dev)) {
2466 deb_info("%s: Upload failed. (file not found?)\n", __func__);
2469 deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size);
2471 nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size;
2472 nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data;
2473 nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size;
2474 nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data;
2476 dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80);
2477 adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]);
2479 if (adap->fe_adap[0].fe == NULL)
2482 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0);
2483 dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82);
2485 fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]);
2486 dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
2488 return fe_slave == NULL ? -ENODEV : 0;
2491 static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap)
2493 struct dib0700_adapter_state *state = adap->priv;
2494 struct i2c_adapter *i2c;
2495 struct dvb_frontend *fe_slave;
2496 u16 data_dib190[10] = {
2503 if (!IS_ENABLED(CONFIG_DVB_DIB9000))
2505 i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
2506 if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
2508 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
2511 if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
2514 dib0700_set_i2c_speed(adap->dev, 1500);
2515 if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
2518 fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1);
2519 if (fe_slave != NULL) {
2520 i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe);
2521 dib9000_set_i2c_adapter(fe_slave, i2c);
2523 i2c = dib9000_get_tuner_interface(fe_slave);
2524 if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL)
2526 fe_slave->dvb = adap->fe_adap[0].fe->dvb;
2527 dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500);
2528 if (dib9000_firmware_post_pll_init(fe_slave) < 0)
2531 release_firmware(state->frontend_firmware);
2537 static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dibx090p_best_adc *adc)
2539 u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
2542 u32 fcp_min = 1900; /* PLL Minimum Frequency comparator KHz */
2543 u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */
2544 u32 fdem_max = 76000;
2545 u32 fdem_min = 69500;
2546 u32 fcp = 0, fs = 0, fdem = 0;
2547 u32 harmonic_id = 0;
2549 adc->pll_loopdiv = loopdiv;
2550 adc->pll_prediv = prediv;
2553 deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min);
2555 /* Find Min and Max prediv */
2556 while ((xtal/max_prediv) >= fcp_min)
2560 min_prediv = max_prediv;
2561 while ((xtal/min_prediv) <= fcp_max) {
2563 if (min_prediv == 1)
2566 deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
2570 for (prediv = min_prediv ; prediv < max_prediv; prediv++) {
2571 fcp = xtal / prediv;
2572 if (fcp > fcp_min && fcp < fcp_max) {
2573 for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) {
2574 fdem = ((xtal/prediv) * loopdiv);
2576 /* test min/max system restrictions */
2578 if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) {
2580 /* test fs harmonics positions */
2581 for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ; harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) {
2582 if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) && ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) {
2589 adc->pll_loopdiv = loopdiv;
2590 adc->pll_prediv = prediv;
2591 adc->timf = 2396745143UL/fdem*(1 << 9);
2592 adc->timf += ((2396745143UL%fdem) << 9)/fdem;
2593 deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf);
2604 if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
2610 static int dib7090_agc_startup(struct dvb_frontend *fe)
2612 struct dvb_usb_adapter *adap = fe->dvb->priv;
2613 struct dib0700_adapter_state *state = adap->priv;
2614 struct dibx000_bandwidth_config pll;
2616 struct dibx090p_best_adc adc;
2619 ret = state->set_param_save(fe);
2623 memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
2624 dib0090_pwm_gain_reset(fe);
2625 target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
2626 state->dib7000p_ops.set_wbd_ref(fe, target);
2628 if (dib7090p_get_best_sampling(fe, &adc) == 0) {
2629 pll.pll_ratio = adc.pll_loopdiv;
2630 pll.pll_prediv = adc.pll_prediv;
2632 state->dib7000p_ops.update_pll(fe, &pll);
2633 state->dib7000p_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
2638 static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart)
2640 deb_info("AGC restart callback: %d", restart);
2641 if (restart == 0) /* before AGC startup */
2642 dib0090_set_dc_servo(fe, 1);
2646 static int tfe7790p_update_lna(struct dvb_frontend *fe, u16 agc_global)
2648 struct dvb_usb_adapter *adap = fe->dvb->priv;
2649 struct dib0700_adapter_state *state = adap->priv;
2651 deb_info("update LNA: agc global=%i", agc_global);
2653 if (agc_global < 25000) {
2654 state->dib7000p_ops.set_gpio(fe, 8, 0, 0);
2655 state->dib7000p_ops.set_agc1_min(fe, 0);
2657 state->dib7000p_ops.set_gpio(fe, 8, 0, 1);
2658 state->dib7000p_ops.set_agc1_min(fe, 32768);
2664 static struct dib0090_wbd_slope dib7090_wbd_table[] = {
2665 { 380, 81, 850, 64, 540, 4},
2666 { 860, 51, 866, 21, 375, 4},
2667 {1700, 0, 250, 0, 100, 6},
2668 {2600, 0, 250, 0, 100, 6},
2669 { 0xFFFF, 0, 0, 0, 0, 0},
2672 static struct dibx000_agc_config dib7090_agc_config[2] = {
2674 .band_caps = BAND_UHF,
2675 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
2676 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
2677 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
2680 .time_stabiliz = 10,
2711 .perform_agc_softsplit = 0,
2713 .band_caps = BAND_FM | BAND_VHF | BAND_CBAND,
2714 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
2715 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
2716 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
2719 .time_stabiliz = 10,
2750 .perform_agc_softsplit = 0,
2754 static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = {
2764 .IO_CLK_en_core = 1,
2767 .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
2768 .ifreq = (0 << 25) | 0,
2770 .xtal_hz = 15000000,
2773 static struct dib7000p_config nim7090_dib7000p_config = {
2774 .output_mpeg2_in_188_bytes = 1,
2775 .hostbus_diversity = 1,
2776 .tuner_is_baseband = 1,
2777 .update_lna = tfe7790p_update_lna, /* GPIO used is the same as TFE7790 */
2779 .agc_config_count = 2,
2780 .agc = dib7090_agc_config,
2782 .bw = &dib7090_clock_config_12_mhz,
2784 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2785 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2786 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2790 .agc_control = dib7090_agc_restart,
2793 .disable_sample_and_hold = 0,
2794 .enable_current_mirror = 0,
2795 .diversity_delay = 0,
2797 .output_mode = OUTMODE_MPEG2_FIFO,
2801 static int tfe7090p_pvr_update_lna(struct dvb_frontend *fe, u16 agc_global)
2803 struct dvb_usb_adapter *adap = fe->dvb->priv;
2804 struct dib0700_adapter_state *state = adap->priv;
2806 deb_info("TFE7090P-PVR update LNA: agc global=%i", agc_global);
2807 if (agc_global < 25000) {
2808 state->dib7000p_ops.set_gpio(fe, 5, 0, 0);
2809 state->dib7000p_ops.set_agc1_min(fe, 0);
2811 state->dib7000p_ops.set_gpio(fe, 5, 0, 1);
2812 state->dib7000p_ops.set_agc1_min(fe, 32768);
2818 static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = {
2820 .output_mpeg2_in_188_bytes = 1,
2821 .hostbus_diversity = 1,
2822 .tuner_is_baseband = 1,
2823 .update_lna = tfe7090p_pvr_update_lna,
2825 .agc_config_count = 2,
2826 .agc = dib7090_agc_config,
2828 .bw = &dib7090_clock_config_12_mhz,
2830 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2831 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2832 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2836 .agc_control = dib7090_agc_restart,
2839 .disable_sample_and_hold = 0,
2840 .enable_current_mirror = 0,
2841 .diversity_delay = 0,
2843 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2844 .default_i2c_addr = 0x90,
2847 .output_mpeg2_in_188_bytes = 1,
2848 .hostbus_diversity = 1,
2849 .tuner_is_baseband = 1,
2850 .update_lna = tfe7090p_pvr_update_lna,
2852 .agc_config_count = 2,
2853 .agc = dib7090_agc_config,
2855 .bw = &dib7090_clock_config_12_mhz,
2857 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2858 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2859 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2863 .agc_control = dib7090_agc_restart,
2866 .disable_sample_and_hold = 0,
2867 .enable_current_mirror = 0,
2868 .diversity_delay = 0,
2870 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2871 .default_i2c_addr = 0x92,
2876 static struct dib0090_config nim7090_dib0090_config = {
2877 .io.clock_khz = 12000,
2881 .io.pll_loopdiv = 6,
2882 .io.adc_clock_ratio = 0,
2883 .io.pll_int_loop_filt = 0,
2885 .freq_offset_khz_uhf = 0,
2886 .freq_offset_khz_vhf = 0,
2891 .wbd_vhf_offset = 0,
2892 .wbd_cband_offset = 0,
2896 .fref_clock_ratio = 0,
2898 .wbd = dib7090_wbd_table,
2900 .ls_cfg_pad_drv = 0,
2906 static struct dib7000p_config tfe7790p_dib7000p_config = {
2907 .output_mpeg2_in_188_bytes = 1,
2908 .hostbus_diversity = 1,
2909 .tuner_is_baseband = 1,
2910 .update_lna = tfe7790p_update_lna,
2912 .agc_config_count = 2,
2913 .agc = dib7090_agc_config,
2915 .bw = &dib7090_clock_config_12_mhz,
2917 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2918 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2919 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2923 .agc_control = dib7090_agc_restart,
2926 .disable_sample_and_hold = 0,
2927 .enable_current_mirror = 0,
2928 .diversity_delay = 0,
2930 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2934 static struct dib0090_config tfe7790p_dib0090_config = {
2935 .io.clock_khz = 12000,
2939 .io.pll_loopdiv = 6,
2940 .io.adc_clock_ratio = 0,
2941 .io.pll_int_loop_filt = 0,
2943 .freq_offset_khz_uhf = 0,
2944 .freq_offset_khz_vhf = 0,
2949 .wbd_vhf_offset = 0,
2950 .wbd_cband_offset = 0,
2954 .fref_clock_ratio = 0,
2956 .wbd = dib7090_wbd_table,
2958 .ls_cfg_pad_drv = 0,
2962 .force_cband_input = 0,
2964 .force_crystal_mode = 1,
2967 static struct dib0090_config tfe7090pvr_dib0090_config[2] = {
2969 .io.clock_khz = 12000,
2973 .io.pll_loopdiv = 6,
2974 .io.adc_clock_ratio = 0,
2975 .io.pll_int_loop_filt = 0,
2977 .freq_offset_khz_uhf = 50,
2978 .freq_offset_khz_vhf = 70,
2983 .wbd_vhf_offset = 0,
2984 .wbd_cband_offset = 0,
2988 .fref_clock_ratio = 0,
2990 .wbd = dib7090_wbd_table,
2992 .ls_cfg_pad_drv = 0,
2997 .io.clock_khz = 12000,
3001 .io.pll_loopdiv = 6,
3002 .io.adc_clock_ratio = 0,
3003 .io.pll_int_loop_filt = 0,
3005 .freq_offset_khz_uhf = -50,
3006 .freq_offset_khz_vhf = -70,
3011 .wbd_vhf_offset = 0,
3012 .wbd_cband_offset = 0,
3016 .fref_clock_ratio = 0,
3018 .wbd = dib7090_wbd_table,
3020 .ls_cfg_pad_drv = 0,
3027 static int nim7090_frontend_attach(struct dvb_usb_adapter *adap)
3029 struct dib0700_adapter_state *state = adap->priv;
3031 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3034 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3036 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3037 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3038 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3039 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3042 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3044 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3046 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) {
3047 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
3048 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3051 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
3053 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3056 static int nim7090_tuner_attach(struct dvb_usb_adapter *adap)
3058 struct dib0700_adapter_state *st = adap->priv;
3059 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3061 nim7090_dib0090_config.reset = st->dib7000p_ops.tuner_sleep,
3062 nim7090_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep,
3063 nim7090_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power;
3065 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL)
3068 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3070 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3071 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3075 static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap)
3077 struct dib0700_state *st = adap->dev->priv;
3078 struct dib0700_adapter_state *state = adap->priv;
3080 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3083 /* The TFE7090 requires the dib0700 to not be in master mode */
3084 st->disable_streaming_master_mode = 1;
3086 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3088 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3089 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3090 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3091 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3094 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3096 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3098 /* initialize IC 0 */
3099 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) {
3100 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
3101 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3105 dib0700_set_i2c_speed(adap->dev, 340);
3106 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
3107 if (adap->fe_adap[0].fe == NULL)
3110 state->dib7000p_ops.slave_reset(adap->fe_adap[0].fe);
3115 static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap)
3117 struct i2c_adapter *i2c;
3118 struct dib0700_adapter_state *state = adap->priv;
3120 if (adap->dev->adapter[0].fe_adap[0].fe == NULL) {
3121 err("the master dib7090 has to be initialized first");
3122 return -ENODEV; /* the master device has not been initialized */
3125 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3128 i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
3129 if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) {
3130 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
3131 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3135 adap->fe_adap[0].fe = state->dib7000p_ops.init(i2c, 0x92, &tfe7090pvr_dib7000p_config[1]);
3136 dib0700_set_i2c_speed(adap->dev, 200);
3138 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3141 static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap)
3143 struct dib0700_adapter_state *st = adap->priv;
3144 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3146 tfe7090pvr_dib0090_config[0].reset = st->dib7000p_ops.tuner_sleep;
3147 tfe7090pvr_dib0090_config[0].sleep = st->dib7000p_ops.tuner_sleep;
3148 tfe7090pvr_dib0090_config[0].get_adc_power = st->dib7000p_ops.get_adc_power;
3150 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL)
3153 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3155 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3156 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3160 static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap)
3162 struct dib0700_adapter_state *st = adap->priv;
3163 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3165 tfe7090pvr_dib0090_config[1].reset = st->dib7000p_ops.tuner_sleep;
3166 tfe7090pvr_dib0090_config[1].sleep = st->dib7000p_ops.tuner_sleep;
3167 tfe7090pvr_dib0090_config[1].get_adc_power = st->dib7000p_ops.get_adc_power;
3169 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL)
3172 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3174 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3175 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3179 static int tfe7790p_frontend_attach(struct dvb_usb_adapter *adap)
3181 struct dib0700_state *st = adap->dev->priv;
3182 struct dib0700_adapter_state *state = adap->priv;
3184 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3187 /* The TFE7790P requires the dib0700 to not be in master mode */
3188 st->disable_streaming_master_mode = 1;
3190 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3192 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3193 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3194 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3195 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3197 dib0700_ctrl_clock(adap->dev, 72, 1);
3198 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3200 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3202 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap,
3203 1, 0x10, &tfe7790p_dib7000p_config) != 0) {
3204 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
3206 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3209 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
3210 0x80, &tfe7790p_dib7000p_config);
3212 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3215 static int tfe7790p_tuner_attach(struct dvb_usb_adapter *adap)
3217 struct dib0700_adapter_state *st = adap->priv;
3218 struct i2c_adapter *tun_i2c =
3219 st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3222 tfe7790p_dib0090_config.reset = st->dib7000p_ops.tuner_sleep;
3223 tfe7790p_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep;
3224 tfe7790p_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power;
3226 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
3227 &tfe7790p_dib0090_config) == NULL)
3230 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3232 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3233 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3238 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
3240 .output_mpeg2_in_188_bytes = 1,
3242 .agc_config_count = 1,
3243 .agc = &dib7070_agc_config,
3244 .bw = &dib7070_bw_config_12_mhz,
3245 .tuner_is_baseband = 1,
3248 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
3249 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
3250 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
3252 .hostbus_diversity = 1,
3254 .output_mpeg2_in_188_bytes = 1,
3256 .agc_config_count = 1,
3257 .agc = &dib7070_agc_config,
3258 .bw = &dib7070_bw_config_12_mhz,
3259 .tuner_is_baseband = 1,
3262 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
3263 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
3264 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
3266 .hostbus_diversity = 1,
3270 static void stk7070pd_init(struct dvb_usb_device *dev)
3272 dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1);
3274 dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1);
3275 dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1);
3276 dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1);
3277 dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0);
3279 dib0700_ctrl_clock(dev, 72, 1);
3282 dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1);
3285 static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
3287 struct dib0700_adapter_state *state = adap->priv;
3289 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3292 stk7070pd_init(adap->dev);
3295 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3297 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
3298 stk7070pd_dib7000p_config) != 0) {
3299 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
3301 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3305 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
3306 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3309 static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
3311 struct dib0700_adapter_state *state = adap->priv;
3313 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3316 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
3317 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3320 static int novatd_read_status_override(struct dvb_frontend *fe,
3321 enum fe_status *stat)
3323 struct dvb_usb_adapter *adap = fe->dvb->priv;
3324 struct dvb_usb_device *dev = adap->dev;
3325 struct dib0700_state *state = dev->priv;
3328 ret = state->read_status(fe, stat);
3331 dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT,
3332 !!(*stat & FE_HAS_LOCK));
3337 static int novatd_sleep_override(struct dvb_frontend* fe)
3339 struct dvb_usb_adapter *adap = fe->dvb->priv;
3340 struct dvb_usb_device *dev = adap->dev;
3341 struct dib0700_state *state = dev->priv;
3344 dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0);
3346 return state->sleep(fe);
3350 * novatd_frontend_attach - Nova-TD specific attach
3352 * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for
3353 * information purposes.
3355 static int novatd_frontend_attach(struct dvb_usb_adapter *adap)
3357 struct dvb_usb_device *dev = adap->dev;
3358 struct dib0700_state *st = dev->priv;
3359 struct dib0700_adapter_state *state = adap->priv;
3361 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3364 if (adap->id == 0) {
3365 stk7070pd_init(dev);
3367 /* turn the power LED on, the other two off (just in case) */
3368 dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0);
3369 dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0);
3370 dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1);
3372 if (state->dib7000p_ops.i2c_enumeration(&dev->i2c_adap, 2, 18,
3373 stk7070pd_dib7000p_config) != 0) {
3374 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
3376 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3381 adap->fe_adap[0].fe = state->dib7000p_ops.init(&dev->i2c_adap,
3382 adap->id == 0 ? 0x80 : 0x82,
3383 &stk7070pd_dib7000p_config[adap->id]);
3385 if (adap->fe_adap[0].fe == NULL)
3388 st->read_status = adap->fe_adap[0].fe->ops.read_status;
3389 adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override;
3390 st->sleep = adap->fe_adap[0].fe->ops.sleep;
3391 adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override;
3397 static struct s5h1411_config pinnacle_801e_config = {
3398 .output_mode = S5H1411_PARALLEL_OUTPUT,
3399 .gpio = S5H1411_GPIO_OFF,
3400 .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
3401 .qam_if = S5H1411_IF_44000,
3402 .vsb_if = S5H1411_IF_44000,
3403 .inversion = S5H1411_INVERSION_OFF,
3404 .status_mode = S5H1411_DEMODLOCKING
3407 /* Pinnacle PCTV HD Pro 801e GPIOs map:
3408 GPIO0 - currently unknown
3409 GPIO1 - xc5000 tuner reset
3410 GPIO2 - CX25843 sleep
3411 GPIO3 - currently unknown
3412 GPIO4 - currently unknown
3413 GPIO6 - currently unknown
3414 GPIO7 - currently unknown
3415 GPIO9 - currently unknown
3416 GPIO10 - CX25843 reset
3418 static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
3420 struct dib0700_state *st = adap->dev->priv;
3422 /* Make use of the new i2c functions from FW 1.20 */
3423 st->fw_use_new_i2c_api = 1;
3425 /* The s5h1411 requires the dib0700 to not be in master mode */
3426 st->disable_streaming_master_mode = 1;
3428 /* All msleep values taken from Windows USB trace */
3429 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
3430 dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
3431 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3433 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3435 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3437 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3438 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3439 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3440 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3441 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
3444 /* Put the CX25843 to sleep for now since we're in digital mode */
3445 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
3447 /* GPIOs are initialized, do the attach */
3448 adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
3449 &adap->dev->i2c_adap);
3450 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3453 static int dib0700_xc5000_tuner_callback(void *priv, int component,
3454 int command, int arg)
3456 struct dvb_usb_adapter *adap = priv;
3458 if (command == XC5000_TUNER_RESET) {
3459 /* Reset the tuner */
3460 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
3462 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
3465 err("xc5000: unknown tuner callback command: %d\n", command);
3472 static struct xc5000_config s5h1411_xc5000_tunerconfig = {
3473 .i2c_address = 0x64,
3477 static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
3479 /* FIXME: generalize & move to common area */
3480 adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback;
3482 return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
3483 &s5h1411_xc5000_tunerconfig)
3484 == NULL ? -ENODEV : 0;
3487 static int dib0700_xc4000_tuner_callback(void *priv, int component,
3488 int command, int arg)
3490 struct dvb_usb_adapter *adap = priv;
3491 struct dib0700_adapter_state *state = adap->priv;
3493 if (command == XC4000_TUNER_RESET) {
3494 /* Reset the tuner */
3495 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
3497 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3499 err("xc4000: unknown tuner callback command: %d\n", command);
3506 static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
3507 .band_caps = BAND_UHF | BAND_VHF,
3510 .time_stabiliz = 0x15,
3511 .alpha_level = 0x00,
3524 .agc1_slope1 = 0x00,
3525 .agc1_slope2 = 0x00,
3528 .agc2_slope1 = 0x1d,
3529 .agc2_slope2 = 0x1d,
3534 .perform_agc_softsplit = 0x00,
3537 static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
3547 .IO_CLK_en_core = 1,
3550 .sad_cfg = (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */
3556 /* FIXME: none of these inputs are validated yet */
3557 static struct dib7000p_config pctv_340e_config = {
3558 .output_mpeg2_in_188_bytes = 1,
3560 .agc_config_count = 1,
3561 .agc = &stk7700p_7000p_xc4000_agc_config,
3562 .bw = &stk7700p_xc4000_pll_config,
3564 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
3565 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
3566 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
3569 /* PCTV 340e GPIOs map:
3571 GPIO2 - CX25843 sleep
3572 GPIO3 - CS5340 reset
3574 GPIO6 - Power Supply
3575 GPIO8 - LNA (1=off 0=on)
3576 GPIO10 - CX25843 reset
3578 GPIO8 - xc4000 reset
3580 static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
3582 struct dib0700_state *st = adap->dev->priv;
3583 struct dib0700_adapter_state *state = adap->priv;
3585 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3588 /* Power Supply on */
3589 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
3591 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3592 msleep(100); /* Allow power supply to settle before probing */
3595 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3596 msleep(1); /* cx25843 datasheet say 350us required */
3597 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3599 /* LNA off for now */
3600 dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1);
3602 /* Put the CX25843 to sleep for now since we're in digital mode */
3603 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
3605 /* FIXME: not verified yet */
3606 dib0700_ctrl_clock(adap->dev, 72, 1);
3610 if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
3611 /* Demodulator not found for some reason? */
3612 dvb_detach(state->dib7000p_ops.set_wbd_ref);
3616 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x12,
3618 st->is_dib7000pc = 1;
3620 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3623 static struct xc4000_config dib7000p_xc4000_tunerconfig = {
3624 .i2c_address = 0x61,
3627 .set_smoothedcvbs = 0,
3631 static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
3633 struct i2c_adapter *tun_i2c;
3634 struct dib0700_adapter_state *state = adap->priv;
3636 /* The xc4000 is not on the main i2c bus */
3637 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
3638 DIBX000_I2C_INTERFACE_TUNER, 1);
3639 if (tun_i2c == NULL) {
3640 printk(KERN_ERR "Could not reach tuner i2c bus\n");
3644 /* Setup the reset callback */
3645 adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback;
3647 return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c,
3648 &dib7000p_xc4000_tunerconfig)
3649 == NULL ? -ENODEV : 0;
3652 static struct lgdt3305_config hcw_lgdt3305_config = {
3654 .mpeg_mode = LGDT3305_MPEG_PARALLEL,
3655 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
3656 .tpvalid_polarity = LGDT3305_TP_VALID_LOW,
3658 .spectral_inversion = 1,
3661 .usref_8vsb = 0x0500,
3664 static struct mxl5007t_config hcw_mxl5007t_config = {
3665 .xtal_freq_hz = MxL_XTAL_25_MHZ,
3666 .if_freq_hz = MxL_IF_6_MHZ,
3671 GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled)
3672 GPIO1 - ANT_SEL (H: VPA, L: MCX)
3678 MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB
3680 static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
3682 struct dib0700_state *st = adap->dev->priv;
3684 /* Make use of the new i2c functions from FW 1.20 */
3685 st->fw_use_new_i2c_api = 1;
3687 st->disable_streaming_master_mode = 1;
3689 /* fe power enable */
3690 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
3692 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3696 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3698 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3700 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3703 adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach,
3704 &hcw_lgdt3305_config,
3705 &adap->dev->i2c_adap);
3707 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3710 static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
3712 return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
3713 &adap->dev->i2c_adap, 0x60,
3714 &hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
3718 /* DVB-USB and USB stuff follows */
3719 struct usb_device_id dib0700_usb_id_table[] = {
3720 /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
3721 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
3722 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
3723 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
3724 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
3725 /* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
3726 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
3727 { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
3728 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
3729 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
3730 /* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
3731 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
3732 { USB_DEVICE(USB_VID_TERRATEC,
3733 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
3734 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
3735 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
3736 /* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
3737 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
3738 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
3739 { USB_DEVICE(USB_VID_PINNACLE,
3740 USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
3741 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) },
3742 /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
3743 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) },
3744 { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
3745 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) },
3746 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) },
3747 /* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
3748 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
3749 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
3750 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) },
3751 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) },
3752 /* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) },
3753 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
3754 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
3755 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
3756 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
3757 /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
3758 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
3759 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) },
3760 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) },
3761 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) },
3762 /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) },
3763 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) },
3764 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
3765 { USB_DEVICE(USB_VID_TERRATEC,
3766 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
3767 { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) },
3768 /* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) },
3769 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
3770 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
3771 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) },
3772 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) },
3773 /* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) },
3774 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) },
3775 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) },
3776 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) },
3777 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) },
3778 /* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) },
3779 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) },
3780 { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) },
3781 { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) },
3782 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) },
3783 /* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
3784 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
3785 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
3786 { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
3787 { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
3788 /* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
3789 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
3790 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) },
3791 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DIVERSITY) },
3792 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090M) },
3793 /* 70 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM8096MD) },
3794 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090MD) },
3795 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM7090) },
3796 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090PVR) },
3797 { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
3798 /* 75 */{ USB_DEVICE(USB_VID_MEDION, USB_PID_CREATIX_CTX1921) },
3799 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) },
3800 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) },
3801 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7790P) },
3802 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE8096P) },
3803 /* 80 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_2) },
3804 { USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E) },
3805 { USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E_SE) },
3806 { 0 } /* Terminating entry */
3808 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
3810 #define DIB0700_DEFAULT_DEVICE_PROPERTIES \
3811 .caps = DVB_USB_IS_AN_I2C_ADAPTER, \
3812 .usb_ctrl = DEVICE_SPECIFIC, \
3813 .firmware = "/*(DEBLOBBED)*/", \
3814 .download_firmware = dib0700_download_firmware, \
3815 .no_reconnect = 1, \
3816 .size_of_priv = sizeof(struct dib0700_state), \
3817 .i2c_algo = &dib0700_i2c_algo, \
3818 .identify_state = dib0700_identify_state
3820 #define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
3821 .streaming_ctrl = dib0700_streaming_ctrl, \
3828 .buffersize = 39480, \
3833 #define DIB0700_NUM_FRONTENDS(n) \
3834 .num_frontends = n, \
3835 .size_of_priv = sizeof(struct dib0700_adapter_state)
3837 struct dvb_usb_device_properties dib0700_devices[] = {
3839 DIB0700_DEFAULT_DEVICE_PROPERTIES,
3844 DIB0700_NUM_FRONTENDS(1),
3846 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3847 .pid_filter_count = 32,
3848 .pid_filter = stk7700p_pid_filter,
3849 .pid_filter_ctrl = stk7700p_pid_filter_ctrl,
3850 .frontend_attach = stk7700p_frontend_attach,
3851 .tuner_attach = stk7700p_tuner_attach,
3853 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3858 .num_device_descs = 8,
3860 { "DiBcom STK7700P reference design",
3861 { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
3864 { "Hauppauge Nova-T Stick",
3865 { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
3868 { "AVerMedia AVerTV DVB-T Volar",
3869 { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
3872 { "Compro Videomate U500",
3873 { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
3876 { "Uniwill STK7700P based (Hama and others)",
3877 { &dib0700_usb_id_table[7], NULL },
3880 { "Leadtek Winfast DTV Dongle (STK7700P based)",
3881 { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
3884 { "AVerMedia AVerTV DVB-T Express",
3885 { &dib0700_usb_id_table[20] },
3889 { &dib0700_usb_id_table[21], NULL },
3895 .rc_interval = DEFAULT_RC_INTERVAL,
3896 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3897 .rc_query = dib0700_rc_query_old_firmware,
3898 .allowed_protos = RC_BIT_RC5 |
3901 .change_protocol = dib0700_change_protocol,
3903 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3908 DIB0700_NUM_FRONTENDS(1),
3910 .frontend_attach = bristol_frontend_attach,
3911 .tuner_attach = bristol_tuner_attach,
3913 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3916 DIB0700_NUM_FRONTENDS(1),
3918 .frontend_attach = bristol_frontend_attach,
3919 .tuner_attach = bristol_tuner_attach,
3921 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
3926 .num_device_descs = 1,
3928 { "Hauppauge Nova-T 500 Dual DVB-T",
3929 { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
3935 .rc_interval = DEFAULT_RC_INTERVAL,
3936 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3937 .rc_query = dib0700_rc_query_old_firmware,
3938 .allowed_protos = RC_BIT_RC5 |
3941 .change_protocol = dib0700_change_protocol,
3943 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3948 DIB0700_NUM_FRONTENDS(1),
3950 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3951 .pid_filter_count = 32,
3952 .pid_filter = stk70x0p_pid_filter,
3953 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3954 .frontend_attach = stk7700d_frontend_attach,
3955 .tuner_attach = stk7700d_tuner_attach,
3957 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3960 DIB0700_NUM_FRONTENDS(1),
3962 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3963 .pid_filter_count = 32,
3964 .pid_filter = stk70x0p_pid_filter,
3965 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3966 .frontend_attach = stk7700d_frontend_attach,
3967 .tuner_attach = stk7700d_tuner_attach,
3969 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
3974 .num_device_descs = 5,
3976 { "Pinnacle PCTV 2000e",
3977 { &dib0700_usb_id_table[11], NULL },
3980 { "Terratec Cinergy DT XS Diversity",
3981 { &dib0700_usb_id_table[12], NULL },
3984 { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
3985 { &dib0700_usb_id_table[13], NULL },
3988 { "DiBcom STK7700D reference design",
3989 { &dib0700_usb_id_table[14], NULL },
3992 { "YUAN High-Tech DiBcom STK7700D",
3993 { &dib0700_usb_id_table[55], NULL },
4000 .rc_interval = DEFAULT_RC_INTERVAL,
4001 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4002 .rc_query = dib0700_rc_query_old_firmware,
4003 .allowed_protos = RC_BIT_RC5 |
4006 .change_protocol = dib0700_change_protocol,
4008 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4013 DIB0700_NUM_FRONTENDS(1),
4015 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4016 .pid_filter_count = 32,
4017 .pid_filter = stk70x0p_pid_filter,
4018 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4019 .frontend_attach = stk7700P2_frontend_attach,
4020 .tuner_attach = stk7700d_tuner_attach,
4022 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4027 .num_device_descs = 3,
4029 { "ASUS My Cinema U3000 Mini DVBT Tuner",
4030 { &dib0700_usb_id_table[23], NULL },
4034 { &dib0700_usb_id_table[31], NULL },
4037 { "Terratec Cinergy T Express",
4038 { &dib0700_usb_id_table[42], NULL },
4044 .rc_interval = DEFAULT_RC_INTERVAL,
4045 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4046 .module_name = "dib0700",
4047 .rc_query = dib0700_rc_query_old_firmware,
4048 .allowed_protos = RC_BIT_RC5 |
4051 .change_protocol = dib0700_change_protocol,
4053 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4058 DIB0700_NUM_FRONTENDS(1),
4060 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4061 .pid_filter_count = 32,
4062 .pid_filter = stk70x0p_pid_filter,
4063 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4064 .frontend_attach = stk7070p_frontend_attach,
4065 .tuner_attach = dib7070p_tuner_attach,
4067 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4072 .num_device_descs = 12,
4074 { "DiBcom STK7070P reference design",
4075 { &dib0700_usb_id_table[15], NULL },
4078 { "Pinnacle PCTV DVB-T Flash Stick",
4079 { &dib0700_usb_id_table[16], NULL },
4082 { "Artec T14BR DVB-T",
4083 { &dib0700_usb_id_table[22], NULL },
4086 { "ASUS My Cinema U3100 Mini DVBT Tuner",
4087 { &dib0700_usb_id_table[24], NULL },
4090 { "Hauppauge Nova-T Stick",
4091 { &dib0700_usb_id_table[25], NULL },
4094 { "Hauppauge Nova-T MyTV.t",
4095 { &dib0700_usb_id_table[26], NULL },
4098 { "Pinnacle PCTV 72e",
4099 { &dib0700_usb_id_table[29], NULL },
4102 { "Pinnacle PCTV 73e",
4103 { &dib0700_usb_id_table[30], NULL },
4106 { "Elgato EyeTV DTT",
4107 { &dib0700_usb_id_table[49], NULL },
4111 { &dib0700_usb_id_table[45], NULL },
4114 { "Elgato EyeTV Dtt Dlx PD378S",
4115 { &dib0700_usb_id_table[50], NULL },
4118 { "Elgato EyeTV DTT rev. 2",
4119 { &dib0700_usb_id_table[80], NULL },
4125 .rc_interval = DEFAULT_RC_INTERVAL,
4126 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4127 .module_name = "dib0700",
4128 .rc_query = dib0700_rc_query_old_firmware,
4129 .allowed_protos = RC_BIT_RC5 |
4132 .change_protocol = dib0700_change_protocol,
4134 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4139 DIB0700_NUM_FRONTENDS(1),
4141 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4142 .pid_filter_count = 32,
4143 .pid_filter = stk70x0p_pid_filter,
4144 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4145 .frontend_attach = stk7070p_frontend_attach,
4146 .tuner_attach = dib7070p_tuner_attach,
4148 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4153 .num_device_descs = 3,
4155 { "Pinnacle PCTV 73A",
4156 { &dib0700_usb_id_table[56], NULL },
4159 { "Pinnacle PCTV 73e SE",
4160 { &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
4163 { "Pinnacle PCTV 282e",
4164 { &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
4170 .rc_interval = DEFAULT_RC_INTERVAL,
4171 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4172 .module_name = "dib0700",
4173 .rc_query = dib0700_rc_query_old_firmware,
4174 .allowed_protos = RC_BIT_RC5 |
4177 .change_protocol = dib0700_change_protocol,
4179 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4184 DIB0700_NUM_FRONTENDS(1),
4186 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4187 .pid_filter_count = 32,
4188 .pid_filter = stk70x0p_pid_filter,
4189 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4190 .frontend_attach = novatd_frontend_attach,
4191 .tuner_attach = dib7070p_tuner_attach,
4193 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4196 DIB0700_NUM_FRONTENDS(1),
4198 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4199 .pid_filter_count = 32,
4200 .pid_filter = stk70x0p_pid_filter,
4201 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4202 .frontend_attach = novatd_frontend_attach,
4203 .tuner_attach = dib7070p_tuner_attach,
4205 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4210 .num_device_descs = 3,
4212 { "Hauppauge Nova-TD Stick (52009)",
4213 { &dib0700_usb_id_table[35], NULL },
4217 { &dib0700_usb_id_table[81], NULL },
4221 { &dib0700_usb_id_table[82], NULL },
4227 .rc_interval = DEFAULT_RC_INTERVAL,
4228 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4229 .module_name = "dib0700",
4230 .rc_query = dib0700_rc_query_old_firmware,
4231 .allowed_protos = RC_BIT_RC5 |
4234 .change_protocol = dib0700_change_protocol,
4236 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4241 DIB0700_NUM_FRONTENDS(1),
4243 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4244 .pid_filter_count = 32,
4245 .pid_filter = stk70x0p_pid_filter,
4246 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4247 .frontend_attach = stk7070pd_frontend_attach0,
4248 .tuner_attach = dib7070p_tuner_attach,
4250 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4253 DIB0700_NUM_FRONTENDS(1),
4255 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4256 .pid_filter_count = 32,
4257 .pid_filter = stk70x0p_pid_filter,
4258 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4259 .frontend_attach = stk7070pd_frontend_attach1,
4260 .tuner_attach = dib7070p_tuner_attach,
4262 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4267 .num_device_descs = 5,
4269 { "DiBcom STK7070PD reference design",
4270 { &dib0700_usb_id_table[17], NULL },
4273 { "Pinnacle PCTV Dual DVB-T Diversity Stick",
4274 { &dib0700_usb_id_table[18], NULL },
4277 { "Hauppauge Nova-TD-500 (84xxx)",
4278 { &dib0700_usb_id_table[36], NULL },
4281 { "Terratec Cinergy DT USB XS Diversity/ T5",
4282 { &dib0700_usb_id_table[43],
4283 &dib0700_usb_id_table[53], NULL},
4287 { &dib0700_usb_id_table[44], NULL },
4293 .rc_interval = DEFAULT_RC_INTERVAL,
4294 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4295 .module_name = "dib0700",
4296 .rc_query = dib0700_rc_query_old_firmware,
4297 .allowed_protos = RC_BIT_RC5 |
4300 .change_protocol = dib0700_change_protocol,
4302 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4307 DIB0700_NUM_FRONTENDS(1),
4309 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4310 .pid_filter_count = 32,
4311 .pid_filter = stk70x0p_pid_filter,
4312 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4313 .frontend_attach = stk7070pd_frontend_attach0,
4314 .tuner_attach = dib7070p_tuner_attach,
4316 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4319 DIB0700_NUM_FRONTENDS(1),
4321 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4322 .pid_filter_count = 32,
4323 .pid_filter = stk70x0p_pid_filter,
4324 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4325 .frontend_attach = stk7070pd_frontend_attach1,
4326 .tuner_attach = dib7070p_tuner_attach,
4328 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4333 .num_device_descs = 1,
4335 { "Elgato EyeTV Diversity",
4336 { &dib0700_usb_id_table[68], NULL },
4342 .rc_interval = DEFAULT_RC_INTERVAL,
4343 .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
4344 .module_name = "dib0700",
4345 .rc_query = dib0700_rc_query_old_firmware,
4346 .allowed_protos = RC_BIT_RC5 |
4349 .change_protocol = dib0700_change_protocol,
4351 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4356 DIB0700_NUM_FRONTENDS(1),
4358 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4359 .pid_filter_count = 32,
4360 .pid_filter = stk70x0p_pid_filter,
4361 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4362 .frontend_attach = stk7700ph_frontend_attach,
4363 .tuner_attach = stk7700ph_tuner_attach,
4365 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4370 .num_device_descs = 9,
4372 { "Terratec Cinergy HT USB XE",
4373 { &dib0700_usb_id_table[27], NULL },
4376 { "Pinnacle Expresscard 320cx",
4377 { &dib0700_usb_id_table[28], NULL },
4380 { "Terratec Cinergy HT Express",
4381 { &dib0700_usb_id_table[32], NULL },
4384 { "Gigabyte U8000-RH",
4385 { &dib0700_usb_id_table[37], NULL },
4388 { "YUAN High-Tech STK7700PH",
4389 { &dib0700_usb_id_table[38], NULL },
4392 { "Asus My Cinema-U3000Hybrid",
4393 { &dib0700_usb_id_table[39], NULL },
4396 { "YUAN High-Tech MC770",
4397 { &dib0700_usb_id_table[48], NULL },
4400 { "Leadtek WinFast DTV Dongle H",
4401 { &dib0700_usb_id_table[51], NULL },
4404 { "YUAN High-Tech STK7700D",
4405 { &dib0700_usb_id_table[54], NULL },
4411 .rc_interval = DEFAULT_RC_INTERVAL,
4412 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4413 .module_name = "dib0700",
4414 .rc_query = dib0700_rc_query_old_firmware,
4415 .allowed_protos = RC_BIT_RC5 |
4418 .change_protocol = dib0700_change_protocol,
4420 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4424 DIB0700_NUM_FRONTENDS(1),
4426 .frontend_attach = s5h1411_frontend_attach,
4427 .tuner_attach = xc5000_tuner_attach,
4429 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4434 .num_device_descs = 2,
4436 { "Pinnacle PCTV HD Pro USB Stick",
4437 { &dib0700_usb_id_table[40], NULL },
4440 { "Pinnacle PCTV HD USB Stick",
4441 { &dib0700_usb_id_table[41], NULL },
4447 .rc_interval = DEFAULT_RC_INTERVAL,
4448 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4449 .module_name = "dib0700",
4450 .rc_query = dib0700_rc_query_old_firmware,
4451 .allowed_protos = RC_BIT_RC5 |
4454 .change_protocol = dib0700_change_protocol,
4456 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4460 DIB0700_NUM_FRONTENDS(1),
4462 .frontend_attach = lgdt3305_frontend_attach,
4463 .tuner_attach = mxl5007t_tuner_attach,
4465 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4470 .num_device_descs = 2,
4472 { "Hauppauge ATSC MiniCard (B200)",
4473 { &dib0700_usb_id_table[46], NULL },
4476 { "Hauppauge ATSC MiniCard (B210)",
4477 { &dib0700_usb_id_table[47], NULL },
4481 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4486 DIB0700_NUM_FRONTENDS(1),
4488 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4489 .pid_filter_count = 32,
4490 .pid_filter = stk70x0p_pid_filter,
4491 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4492 .frontend_attach = stk7770p_frontend_attach,
4493 .tuner_attach = dib7770p_tuner_attach,
4495 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4500 .num_device_descs = 4,
4502 { "DiBcom STK7770P reference design",
4503 { &dib0700_usb_id_table[59], NULL },
4506 { "Terratec Cinergy T USB XXS (HD)/ T3",
4507 { &dib0700_usb_id_table[33],
4508 &dib0700_usb_id_table[52],
4509 &dib0700_usb_id_table[60], NULL},
4512 { "TechniSat AirStar TeleStick 2",
4513 { &dib0700_usb_id_table[74], NULL },
4516 { "Medion CTX1921 DVB-T USB",
4517 { &dib0700_usb_id_table[75], NULL },
4523 .rc_interval = DEFAULT_RC_INTERVAL,
4524 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4525 .module_name = "dib0700",
4526 .rc_query = dib0700_rc_query_old_firmware,
4527 .allowed_protos = RC_BIT_RC5 |
4530 .change_protocol = dib0700_change_protocol,
4532 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4536 DIB0700_NUM_FRONTENDS(1),
4538 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4539 .pid_filter_count = 32,
4540 .pid_filter = stk80xx_pid_filter,
4541 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4542 .frontend_attach = stk807x_frontend_attach,
4543 .tuner_attach = dib807x_tuner_attach,
4545 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4550 .num_device_descs = 3,
4552 { "DiBcom STK807xP reference design",
4553 { &dib0700_usb_id_table[62], NULL },
4556 { "Prolink Pixelview SBTVD",
4557 { &dib0700_usb_id_table[63], NULL },
4560 { "EvolutePC TVWay+",
4561 { &dib0700_usb_id_table[64], NULL },
4567 .rc_interval = DEFAULT_RC_INTERVAL,
4568 .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
4569 .module_name = "dib0700",
4570 .rc_query = dib0700_rc_query_old_firmware,
4571 .allowed_protos = RC_BIT_RC5 |
4574 .change_protocol = dib0700_change_protocol,
4576 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4580 DIB0700_NUM_FRONTENDS(1),
4582 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4583 .pid_filter_count = 32,
4584 .pid_filter = stk80xx_pid_filter,
4585 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4586 .frontend_attach = stk807xpvr_frontend_attach0,
4587 .tuner_attach = dib807x_tuner_attach,
4589 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4593 DIB0700_NUM_FRONTENDS(1),
4595 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4596 .pid_filter_count = 32,
4597 .pid_filter = stk80xx_pid_filter,
4598 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4599 .frontend_attach = stk807xpvr_frontend_attach1,
4600 .tuner_attach = dib807x_tuner_attach,
4602 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4607 .num_device_descs = 1,
4609 { "DiBcom STK807xPVR reference design",
4610 { &dib0700_usb_id_table[61], NULL },
4616 .rc_interval = DEFAULT_RC_INTERVAL,
4617 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4618 .module_name = "dib0700",
4619 .rc_query = dib0700_rc_query_old_firmware,
4620 .allowed_protos = RC_BIT_RC5 |
4623 .change_protocol = dib0700_change_protocol,
4625 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4629 DIB0700_NUM_FRONTENDS(1),
4631 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4632 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4633 .pid_filter_count = 32,
4634 .pid_filter = stk80xx_pid_filter,
4635 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4636 .frontend_attach = stk809x_frontend_attach,
4637 .tuner_attach = dib809x_tuner_attach,
4639 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4644 .num_device_descs = 1,
4646 { "DiBcom STK8096GP reference design",
4647 { &dib0700_usb_id_table[67], NULL },
4653 .rc_interval = DEFAULT_RC_INTERVAL,
4654 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4655 .module_name = "dib0700",
4656 .rc_query = dib0700_rc_query_old_firmware,
4657 .allowed_protos = RC_BIT_RC5 |
4660 .change_protocol = dib0700_change_protocol,
4662 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4666 DIB0700_NUM_FRONTENDS(1),
4668 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4669 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4670 .pid_filter_count = 32,
4671 .pid_filter = dib90x0_pid_filter,
4672 .pid_filter_ctrl = dib90x0_pid_filter_ctrl,
4673 .frontend_attach = stk9090m_frontend_attach,
4674 .tuner_attach = dib9090_tuner_attach,
4676 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4681 .num_device_descs = 1,
4683 { "DiBcom STK9090M reference design",
4684 { &dib0700_usb_id_table[69], NULL },
4690 .rc_interval = DEFAULT_RC_INTERVAL,
4691 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4692 .module_name = "dib0700",
4693 .rc_query = dib0700_rc_query_old_firmware,
4694 .allowed_protos = RC_BIT_RC5 |
4697 .change_protocol = dib0700_change_protocol,
4699 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4703 DIB0700_NUM_FRONTENDS(1),
4705 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4706 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4707 .pid_filter_count = 32,
4708 .pid_filter = stk80xx_pid_filter,
4709 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4710 .frontend_attach = nim8096md_frontend_attach,
4711 .tuner_attach = nim8096md_tuner_attach,
4713 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4718 .num_device_descs = 1,
4720 { "DiBcom NIM8096MD reference design",
4721 { &dib0700_usb_id_table[70], NULL },
4727 .rc_interval = DEFAULT_RC_INTERVAL,
4728 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4729 .module_name = "dib0700",
4730 .rc_query = dib0700_rc_query_old_firmware,
4731 .allowed_protos = RC_BIT_RC5 |
4734 .change_protocol = dib0700_change_protocol,
4736 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4740 DIB0700_NUM_FRONTENDS(1),
4742 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4743 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4744 .pid_filter_count = 32,
4745 .pid_filter = dib90x0_pid_filter,
4746 .pid_filter_ctrl = dib90x0_pid_filter_ctrl,
4747 .frontend_attach = nim9090md_frontend_attach,
4748 .tuner_attach = nim9090md_tuner_attach,
4750 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4755 .num_device_descs = 1,
4757 { "DiBcom NIM9090MD reference design",
4758 { &dib0700_usb_id_table[71], NULL },
4764 .rc_interval = DEFAULT_RC_INTERVAL,
4765 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4766 .module_name = "dib0700",
4767 .rc_query = dib0700_rc_query_old_firmware,
4768 .allowed_protos = RC_BIT_RC5 |
4771 .change_protocol = dib0700_change_protocol,
4773 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4777 DIB0700_NUM_FRONTENDS(1),
4779 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4780 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4781 .pid_filter_count = 32,
4782 .pid_filter = stk70x0p_pid_filter,
4783 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4784 .frontend_attach = nim7090_frontend_attach,
4785 .tuner_attach = nim7090_tuner_attach,
4787 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4792 .num_device_descs = 1,
4794 { "DiBcom NIM7090 reference design",
4795 { &dib0700_usb_id_table[72], NULL },
4801 .rc_interval = DEFAULT_RC_INTERVAL,
4802 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4803 .module_name = "dib0700",
4804 .rc_query = dib0700_rc_query_old_firmware,
4805 .allowed_protos = RC_BIT_RC5 |
4808 .change_protocol = dib0700_change_protocol,
4810 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4814 DIB0700_NUM_FRONTENDS(1),
4816 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4817 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4818 .pid_filter_count = 32,
4819 .pid_filter = stk70x0p_pid_filter,
4820 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4821 .frontend_attach = tfe7090pvr_frontend0_attach,
4822 .tuner_attach = tfe7090pvr_tuner0_attach,
4824 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4828 DIB0700_NUM_FRONTENDS(1),
4830 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4831 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4832 .pid_filter_count = 32,
4833 .pid_filter = stk70x0p_pid_filter,
4834 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4835 .frontend_attach = tfe7090pvr_frontend1_attach,
4836 .tuner_attach = tfe7090pvr_tuner1_attach,
4838 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4843 .num_device_descs = 1,
4845 { "DiBcom TFE7090PVR reference design",
4846 { &dib0700_usb_id_table[73], NULL },
4852 .rc_interval = DEFAULT_RC_INTERVAL,
4853 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4854 .module_name = "dib0700",
4855 .rc_query = dib0700_rc_query_old_firmware,
4856 .allowed_protos = RC_BIT_RC5 |
4859 .change_protocol = dib0700_change_protocol,
4861 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4865 DIB0700_NUM_FRONTENDS(1),
4867 .frontend_attach = pctv340e_frontend_attach,
4868 .tuner_attach = xc4000_tuner_attach,
4870 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4875 .num_device_descs = 2,
4877 { "Pinnacle PCTV 340e HD Pro USB Stick",
4878 { &dib0700_usb_id_table[76], NULL },
4881 { "Pinnacle PCTV Hybrid Stick Solo",
4882 { &dib0700_usb_id_table[77], NULL },
4887 .rc_interval = DEFAULT_RC_INTERVAL,
4888 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4889 .module_name = "dib0700",
4890 .rc_query = dib0700_rc_query_old_firmware,
4891 .allowed_protos = RC_BIT_RC5 |
4894 .change_protocol = dib0700_change_protocol,
4896 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4900 DIB0700_NUM_FRONTENDS(1),
4902 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4903 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4904 .pid_filter_count = 32,
4905 .pid_filter = stk70x0p_pid_filter,
4906 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4907 .frontend_attach = tfe7790p_frontend_attach,
4908 .tuner_attach = tfe7790p_tuner_attach,
4910 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4915 .num_device_descs = 1,
4917 { "DiBcom TFE7790P reference design",
4918 { &dib0700_usb_id_table[78], NULL },
4924 .rc_interval = DEFAULT_RC_INTERVAL,
4925 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4926 .module_name = "dib0700",
4927 .rc_query = dib0700_rc_query_old_firmware,
4928 .allowed_protos = RC_BIT_RC5 |
4931 .change_protocol = dib0700_change_protocol,
4933 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4937 DIB0700_NUM_FRONTENDS(1),
4939 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4940 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4941 .pid_filter_count = 32,
4942 .pid_filter = stk80xx_pid_filter,
4943 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4944 .frontend_attach = tfe8096p_frontend_attach,
4945 .tuner_attach = tfe8096p_tuner_attach,
4947 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4953 .num_device_descs = 1,
4955 { "DiBcom TFE8096P reference design",
4956 { &dib0700_usb_id_table[79], NULL },
4962 .rc_interval = DEFAULT_RC_INTERVAL,
4963 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4964 .module_name = "dib0700",
4965 .rc_query = dib0700_rc_query_old_firmware,
4966 .allowed_protos = RC_BIT_RC5 |
4969 .change_protocol = dib0700_change_protocol,
4974 int dib0700_device_count = ARRAY_SIZE(dib0700_devices);