GNU Linux-libre 6.7.9-gnu
[releases.git] / drivers / media / usb / cx231xx / cx231xx-pcb-cfg.h
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3    cx231xx-pcb-cfg.h - driver for Conexant
4                 Cx23100/101/102 USB video capture devices
5
6    Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
7
8  */
9
10 #ifndef _PCB_CONFIG_H_
11 #define _PCB_CONFIG_H_
12
13 #include <linux/init.h>
14 #include <linux/module.h>
15
16 /***************************************************************************
17                                 * Class Information *
18 ***************************************************************************/
19 #define CLASS_DEFAULT       0xFF
20
21 enum VENDOR_REQUEST_TYPE {
22         /* Set/Get I2C */
23         VRT_SET_I2C0 = 0x0,
24         VRT_SET_I2C1 = 0x1,
25         VRT_SET_I2C2 = 0x2,
26         VRT_GET_I2C0 = 0x4,
27         VRT_GET_I2C1 = 0x5,
28         VRT_GET_I2C2 = 0x6,
29
30         /* Set/Get GPIO */
31         VRT_SET_GPIO = 0x8,
32         VRT_GET_GPIO = 0x9,
33
34         /* Set/Get GPIE */
35         VRT_SET_GPIE = 0xA,
36         VRT_GET_GPIE = 0xB,
37
38         /* Set/Get Register Control/Status */
39         VRT_SET_REGISTER = 0xC,
40         VRT_GET_REGISTER = 0xD,
41
42         /* Get Extended Compat ID Descriptor */
43         VRT_GET_EXTCID_DESC = 0xFF,
44 };
45
46 enum BYTE_ENABLE_MASK {
47         ENABLE_ONE_BYTE = 0x1,
48         ENABLE_TWE_BYTE = 0x3,
49         ENABLE_THREE_BYTE = 0x7,
50         ENABLE_FOUR_BYTE = 0xF,
51 };
52
53 #define SPEED_MASK      0x1
54 enum USB_SPEED{
55         FULL_SPEED = 0x0,       /* 0: full speed */
56         HIGH_SPEED = 0x1        /* 1: high speed */
57 };
58
59 #define TS_MASK         0x6
60 enum TS_PORT{
61         NO_TS_PORT = 0x0,       /* 2'b00: Neither port used. PCB not a Hybrid,
62                                    only offers Analog TV or Video */
63         TS1_PORT = 0x4,         /* 2'b10: TS1 Input (Hybrid mode :
64                                 Digital or External Analog/Compressed source) */
65         TS1_TS2_PORT = 0x6,     /* 2'b11: TS1 & TS2 Inputs
66                                 (Dual inputs from Digital and/or
67                                 External Analog/Compressed sources) */
68         TS1_EXT_CLOCK = 0x6,    /* 2'b11: TS1 & TS2 as selector
69                                                 to external clock */
70         TS1VIP_TS2_PORT = 0x2   /* 2'b01: TS1 used as 656/VIP Output,
71                                    TS2 Input (from Compressor) */
72 };
73
74 #define EAVP_MASK       0x8
75 enum EAV_PRESENT{
76         NO_EXTERNAL_AV = 0x0,   /* 0: No External A/V inputs
77                                                 (no need for i2s block),
78                                                 Analog Tuner must be present */
79         EXTERNAL_AV = 0x8       /* 1: External A/V inputs
80                                                 present (requires i2s blk) */
81 };
82
83 #define ATM_MASK        0x30
84 enum AT_MODE{
85         DIF_TUNER = 0x30,       /* 2'b11: IF Tuner (requires use of DIF) */
86         BASEBAND_SOUND = 0x20,  /* 2'b10: Baseband Composite &
87                                                 Sound-IF Signals present */
88         NO_TUNER = 0x10         /* 2'b0x: No Analog Tuner present */
89 };
90
91 #define PWR_SEL_MASK    0x40
92 enum POWE_TYPE{
93         SELF_POWER = 0x0,       /* 0: self power */
94         BUS_POWER = 0x40        /* 1: bus power */
95 };
96
97 enum USB_POWE_TYPE{
98         USB_SELF_POWER = 0,
99         USB_BUS_POWER
100 };
101
102 #define BO_0_MASK       0x80
103 enum AVDEC_STATUS{
104         AVDEC_DISABLE = 0x0,    /* 0: A/V Decoder Disabled */
105         AVDEC_ENABLE = 0x80     /* 1: A/V Decoder Enabled */
106 };
107
108 #define BO_1_MASK       0x100
109
110 #define BUSPOWER_MASK   0xC4    /* for Polaris spec 0.8 */
111 #define SELFPOWER_MASK  0x86
112
113 /***************************************************************************/
114 #define NOT_DECIDE_YET  0xFE
115 #define NOT_SUPPORTED   0xFF
116
117 /***************************************************************************
118                                 * for mod field use *
119 ***************************************************************************/
120 #define MOD_DIGITAL     0x1
121 #define MOD_ANALOG      0x2
122 #define MOD_DIF         0x4
123 #define MOD_EXTERNAL    0x8
124 #define CAP_ALL_MOD     0x0f
125
126 /***************************************************************************
127                                 * source define *
128 ***************************************************************************/
129 #define SOURCE_DIGITAL          0x1
130 #define SOURCE_ANALOG           0x2
131 #define SOURCE_DIF              0x4
132 #define SOURCE_EXTERNAL         0x8
133 #define SOURCE_TS_BDA                   0x10
134 #define SOURCE_TS_ENCODE                0x20
135 #define SOURCE_TS_EXTERNAL      0x40
136
137 /***************************************************************************
138                                 * interface information define *
139 ***************************************************************************/
140 struct INTERFACE_INFO {
141         u8 interrupt_index;
142         u8 ts1_index;
143         u8 ts2_index;
144         u8 audio_index;
145         u8 video_index;
146         u8 vanc_index;          /* VBI */
147         u8 hanc_index;          /* Sliced CC */
148         u8 ir_index;
149 };
150
151 enum INDEX_INTERFACE_INFO{
152         INDEX_INTERRUPT = 0x0,
153         INDEX_TS1,
154         INDEX_TS2,
155         INDEX_AUDIO,
156         INDEX_VIDEO,
157         INDEX_VANC,
158         INDEX_HANC,
159         INDEX_IR,
160 };
161
162 /***************************************************************************
163                                 * configuration information define *
164 ***************************************************************************/
165 struct CONFIG_INFO {
166         u8 config_index;
167         struct INTERFACE_INFO interface_info;
168 };
169
170 struct pcb_config {
171         u8 index;
172         u8 type;                /* bus power or self power,
173                                            self power--0, bus_power--1 */
174         u8 speed;               /* usb speed, 2.0--1, 1.1--0 */
175         u8 mode;                /* digital , anlog, dif or external A/V */
176         u32 ts1_source;         /* three source -- BDA,External,encode */
177         u32 ts2_source;
178         u32 analog_source;
179         u8 digital_index;       /* bus-power used */
180         u8 analog_index;        /* bus-power used */
181         u8 dif_index;           /* bus-power used */
182         u8 external_index;      /* bus-power used */
183         u8 config_num;          /* current config num, 0,1,2,
184                                                    for self-power, always 0 */
185         struct CONFIG_INFO hs_config_info[3];
186         struct CONFIG_INFO fs_config_info[3];
187 };
188
189 enum INDEX_PCB_CONFIG{
190         INDEX_SELFPOWER_DIGITAL_ONLY = 0x0,
191         INDEX_SELFPOWER_DUAL_DIGITAL,
192         INDEX_SELFPOWER_ANALOG_ONLY,
193         INDEX_SELFPOWER_DUAL,
194         INDEX_SELFPOWER_TRIPLE,
195         INDEX_SELFPOWER_COMPRESSOR,
196         INDEX_BUSPOWER_DIGITAL_ONLY,
197         INDEX_BUSPOWER_ANALOG_ONLY,
198         INDEX_BUSPOWER_DIF_ONLY,
199         INDEX_BUSPOWER_EXTERNAL_ONLY,
200         INDEX_BUSPOWER_EXTERNAL_ANALOG,
201         INDEX_BUSPOWER_EXTERNAL_DIF,
202         INDEX_BUSPOWER_EXTERNAL_DIGITAL,
203         INDEX_BUSPOWER_DIGITAL_ANALOG,
204         INDEX_BUSPOWER_DIGITAL_DIF,
205         INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL,
206         INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL,
207 };
208
209 /***************************************************************************/
210 struct cx231xx;
211
212 int initialize_cx231xx(struct cx231xx *p_dev);
213
214 #endif