1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Driver for Mediatek IR Receiver Controller
5 * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
9 #include <linux/interrupt.h>
10 #include <linux/module.h>
11 #include <linux/of_platform.h>
12 #include <linux/reset.h>
13 #include <media/rc-core.h>
15 #define MTK_IR_DEV KBUILD_MODNAME
17 /* Register to enable PWM and IR */
18 #define MTK_CONFIG_HIGH_REG 0x0c
20 /* Bit to enable IR pulse width detection */
21 #define MTK_PWM_EN BIT(13)
24 * Register to setting ok count whose unit based on hardware sampling period
25 * indicating IR receiving completion and then making IRQ fires
27 #define MTK_OK_COUNT(x) (((x) & GENMASK(23, 16)) << 16)
29 /* Bit to enable IR hardware function */
30 #define MTK_IR_EN BIT(0)
32 /* Bit to restart IR receiving */
33 #define MTK_IRCLR BIT(0)
35 /* Fields containing pulse width data */
36 #define MTK_WIDTH_MASK (GENMASK(7, 0))
39 #define MTK_IRTHD 0x14
40 #define MTK_DG_CNT_MASK (GENMASK(12, 8))
41 #define MTK_DG_CNT(x) ((x) << 8)
43 /* Bit to enable interrupt */
44 #define MTK_IRINT_EN BIT(0)
46 /* Bit to clear interrupt status */
47 #define MTK_IRINT_CLR BIT(0)
49 /* Maximum count of samples */
50 #define MTK_MAX_SAMPLES 0xff
51 /* Indicate the end of IR message */
52 #define MTK_IR_END(v, p) ((v) == MTK_MAX_SAMPLES && (p) == 0)
53 /* Number of registers to record the pulse width */
54 #define MTK_CHKDATA_SZ 17
55 /* Sample period in us */
56 #define MTK_IR_SAMPLE 46
59 /* Register to setting software sampling period */
61 /* Register to setting hardware sampling period */
66 /* Register to clear state of state machine */
68 /* Register containing pulse width data */
70 /* Register to enable IR interrupt */
72 /* Register to ack IR interrupt */
76 static const u32 mt7623_regs[] = {
77 [MTK_IRCLR_REG] = 0x20,
78 [MTK_CHKDATA_REG] = 0x88,
79 [MTK_IRINT_EN_REG] = 0xcc,
80 [MTK_IRINT_CLR_REG] = 0xd0,
83 static const u32 mt7622_regs[] = {
84 [MTK_IRCLR_REG] = 0x18,
85 [MTK_CHKDATA_REG] = 0x30,
86 [MTK_IRINT_EN_REG] = 0x1c,
87 [MTK_IRINT_CLR_REG] = 0x20,
90 struct mtk_field_type {
97 * struct mtk_ir_data - This is the structure holding all differences among
99 * @regs: The pointer to the array holding registers offset
100 * @fields: The pointer to the array holding fields location
101 * @div: The internal divisor for the based reference clock
102 * @ok_count: The count indicating the completion of IR data
103 * receiving when count is reached
104 * @hw_period: The value indicating the hardware sampling period
108 const struct mtk_field_type *fields;
114 static const struct mtk_field_type mt7623_fields[] = {
115 [MTK_CHK_PERIOD] = {0x10, 8, GENMASK(20, 8)},
116 [MTK_HW_PERIOD] = {0x10, 0, GENMASK(7, 0)},
119 static const struct mtk_field_type mt7622_fields[] = {
120 [MTK_CHK_PERIOD] = {0x24, 0, GENMASK(24, 0)},
121 [MTK_HW_PERIOD] = {0x10, 0, GENMASK(24, 0)},
125 * struct mtk_ir - This is the main datasructure for holding the state
127 * @dev: The device pointer
128 * @rc: The rc instrance
129 * @base: The mapped register i/o base
130 * @irq: The IRQ that we are using
131 * @clk: The clock that IR internal is using
132 * @bus: The clock that software decoder is using
133 * @data: Holding specific data for vaious platform
142 const struct mtk_ir_data *data;
145 static inline u32 mtk_chkdata_reg(struct mtk_ir *ir, u32 i)
147 return ir->data->regs[MTK_CHKDATA_REG] + 4 * i;
150 static inline u32 mtk_chk_period(struct mtk_ir *ir)
155 * Period for software decoder used in the
156 * unit of raw software sampling
158 val = DIV_ROUND_CLOSEST(clk_get_rate(ir->bus),
159 USEC_PER_SEC * ir->data->div / MTK_IR_SAMPLE);
161 dev_dbg(ir->dev, "@pwm clk = \t%lu\n",
162 clk_get_rate(ir->bus) / ir->data->div);
163 dev_dbg(ir->dev, "@chkperiod = %08x\n", val);
168 static void mtk_w32_mask(struct mtk_ir *ir, u32 val, u32 mask, unsigned int reg)
172 tmp = __raw_readl(ir->base + reg);
173 tmp = (tmp & ~mask) | val;
174 __raw_writel(tmp, ir->base + reg);
177 static void mtk_w32(struct mtk_ir *ir, u32 val, unsigned int reg)
179 __raw_writel(val, ir->base + reg);
182 static u32 mtk_r32(struct mtk_ir *ir, unsigned int reg)
184 return __raw_readl(ir->base + reg);
187 static inline void mtk_irq_disable(struct mtk_ir *ir, u32 mask)
191 val = mtk_r32(ir, ir->data->regs[MTK_IRINT_EN_REG]);
192 mtk_w32(ir, val & ~mask, ir->data->regs[MTK_IRINT_EN_REG]);
195 static inline void mtk_irq_enable(struct mtk_ir *ir, u32 mask)
199 val = mtk_r32(ir, ir->data->regs[MTK_IRINT_EN_REG]);
200 mtk_w32(ir, val | mask, ir->data->regs[MTK_IRINT_EN_REG]);
203 static irqreturn_t mtk_ir_irq(int irqno, void *dev_id)
205 struct mtk_ir *ir = dev_id;
208 struct ir_raw_event rawir = {};
211 * Reset decoder state machine explicitly is required
212 * because 1) the longest duration for space MTK IR hardware
213 * could record is not safely long. e.g 12ms if rx resolution
214 * is 46us by default. There is still the risk to satisfying
215 * every decoder to reset themselves through long enough
216 * trailing spaces and 2) the IRQ handler guarantees that
217 * start of IR message is always contained in and starting
218 * from register mtk_chkdata_reg(ir, i).
220 ir_raw_event_reset(ir->rc);
222 /* First message must be pulse */
225 /* Handle all pulse and space IR controller captures */
226 for (i = 0 ; i < MTK_CHKDATA_SZ ; i++) {
227 val = mtk_r32(ir, mtk_chkdata_reg(ir, i));
228 dev_dbg(ir->dev, "@reg%d=0x%08x\n", i, val);
230 for (j = 0 ; j < 4 ; j++) {
231 wid = (val & (MTK_WIDTH_MASK << j * 8)) >> j * 8;
232 rawir.pulse = !rawir.pulse;
233 rawir.duration = wid * (MTK_IR_SAMPLE + 1);
234 ir_raw_event_store_with_filter(ir->rc, &rawir);
239 * The maximum number of edges the IR controller can
240 * hold is MTK_CHKDATA_SZ * 4. So if received IR messages
241 * is over the limit, the last incomplete IR message would
242 * be appended trailing space and still would be sent into
243 * ir-rc-raw to decode. That helps it is possible that it
244 * has enough information to decode a scancode even if the
245 * trailing end of the message is missing.
247 if (!MTK_IR_END(wid, rawir.pulse)) {
249 rawir.duration = MTK_MAX_SAMPLES * (MTK_IR_SAMPLE + 1);
250 ir_raw_event_store_with_filter(ir->rc, &rawir);
253 ir_raw_event_handle(ir->rc);
256 * Restart controller for the next receive that would
257 * clear up all CHKDATA registers
259 mtk_w32_mask(ir, 0x1, MTK_IRCLR, ir->data->regs[MTK_IRCLR_REG]);
261 /* Clear interrupt status */
262 mtk_w32_mask(ir, 0x1, MTK_IRINT_CLR,
263 ir->data->regs[MTK_IRINT_CLR_REG]);
268 static const struct mtk_ir_data mt7623_data = {
270 .fields = mt7623_fields,
276 static const struct mtk_ir_data mt7622_data = {
278 .fields = mt7622_fields,
284 static const struct of_device_id mtk_ir_match[] = {
285 { .compatible = "mediatek,mt7623-cir", .data = &mt7623_data},
286 { .compatible = "mediatek,mt7622-cir", .data = &mt7622_data},
289 MODULE_DEVICE_TABLE(of, mtk_ir_match);
291 static int mtk_ir_probe(struct platform_device *pdev)
293 struct device *dev = &pdev->dev;
294 struct device_node *dn = dev->of_node;
295 struct resource *res;
299 const char *map_name;
301 ir = devm_kzalloc(dev, sizeof(struct mtk_ir), GFP_KERNEL);
306 ir->data = of_device_get_match_data(dev);
308 ir->clk = devm_clk_get(dev, "clk");
309 if (IS_ERR(ir->clk)) {
310 dev_err(dev, "failed to get a ir clock.\n");
311 return PTR_ERR(ir->clk);
314 ir->bus = devm_clk_get(dev, "bus");
315 if (IS_ERR(ir->bus)) {
317 * For compatibility with older device trees try unnamed
318 * ir->bus uses the same clock as ir->clock.
323 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
324 ir->base = devm_ioremap_resource(dev, res);
325 if (IS_ERR(ir->base))
326 return PTR_ERR(ir->base);
328 ir->rc = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW);
330 dev_err(dev, "failed to allocate device\n");
335 ir->rc->device_name = MTK_IR_DEV;
336 ir->rc->input_phys = MTK_IR_DEV "/input0";
337 ir->rc->input_id.bustype = BUS_HOST;
338 ir->rc->input_id.vendor = 0x0001;
339 ir->rc->input_id.product = 0x0001;
340 ir->rc->input_id.version = 0x0001;
341 map_name = of_get_property(dn, "linux,rc-map-name", NULL);
342 ir->rc->map_name = map_name ?: RC_MAP_EMPTY;
343 ir->rc->dev.parent = dev;
344 ir->rc->driver_name = MTK_IR_DEV;
345 ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
346 ir->rc->rx_resolution = MTK_IR_SAMPLE;
347 ir->rc->timeout = MTK_MAX_SAMPLES * (MTK_IR_SAMPLE + 1);
349 ret = devm_rc_register_device(dev, ir->rc);
351 dev_err(dev, "failed to register rc device\n");
355 platform_set_drvdata(pdev, ir);
357 ir->irq = platform_get_irq(pdev, 0);
361 if (clk_prepare_enable(ir->clk)) {
362 dev_err(dev, "try to enable ir_clk failed\n");
366 if (clk_prepare_enable(ir->bus)) {
367 dev_err(dev, "try to enable ir_clk failed\n");
369 goto exit_clkdisable_clk;
373 * Enable interrupt after proper hardware
374 * setup and IRQ handler registration
376 mtk_irq_disable(ir, MTK_IRINT_EN);
378 ret = devm_request_irq(dev, ir->irq, mtk_ir_irq, 0, MTK_IR_DEV, ir);
380 dev_err(dev, "failed request irq\n");
381 goto exit_clkdisable_bus;
385 * Setup software sample period as the reference of software decoder
387 val = (mtk_chk_period(ir) << ir->data->fields[MTK_CHK_PERIOD].offset) &
388 ir->data->fields[MTK_CHK_PERIOD].mask;
389 mtk_w32_mask(ir, val, ir->data->fields[MTK_CHK_PERIOD].mask,
390 ir->data->fields[MTK_CHK_PERIOD].reg);
393 * Setup hardware sampling period used to setup the proper timeout for
394 * indicating end of IR receiving completion
396 val = (ir->data->hw_period << ir->data->fields[MTK_HW_PERIOD].offset) &
397 ir->data->fields[MTK_HW_PERIOD].mask;
398 mtk_w32_mask(ir, val, ir->data->fields[MTK_HW_PERIOD].mask,
399 ir->data->fields[MTK_HW_PERIOD].reg);
401 /* Set de-glitch counter */
402 mtk_w32_mask(ir, MTK_DG_CNT(1), MTK_DG_CNT_MASK, MTK_IRTHD);
404 /* Enable IR and PWM */
405 val = mtk_r32(ir, MTK_CONFIG_HIGH_REG);
406 val |= MTK_OK_COUNT(ir->data->ok_count) | MTK_PWM_EN | MTK_IR_EN;
407 mtk_w32(ir, val, MTK_CONFIG_HIGH_REG);
409 mtk_irq_enable(ir, MTK_IRINT_EN);
411 dev_info(dev, "Initialized MT7623 IR driver, sample period = %dus\n",
417 clk_disable_unprepare(ir->bus);
419 clk_disable_unprepare(ir->clk);
424 static int mtk_ir_remove(struct platform_device *pdev)
426 struct mtk_ir *ir = platform_get_drvdata(pdev);
429 * Avoid contention between remove handler and
430 * IRQ handler so that disabling IR interrupt and
431 * waiting for pending IRQ handler to complete
433 mtk_irq_disable(ir, MTK_IRINT_EN);
434 synchronize_irq(ir->irq);
436 clk_disable_unprepare(ir->bus);
437 clk_disable_unprepare(ir->clk);
442 static struct platform_driver mtk_ir_driver = {
443 .probe = mtk_ir_probe,
444 .remove = mtk_ir_remove,
447 .of_match_table = mtk_ir_match,
451 module_platform_driver(mtk_ir_driver);
453 MODULE_DESCRIPTION("Mediatek IR Receiver Controller Driver");
454 MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
455 MODULE_LICENSE("GPL");