drivers/media/rc/ite-cir.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Driver for ITE Tech Inc. IT8712F/IT8512 CIR
   4  *
   5  * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com>
   6  *
   7  * Inspired by the original lirc_it87 and lirc_ite8709 drivers, on top of the
   8  * skeleton provided by the nuvoton-cir driver.
   9  *
  10  * The lirc_it87 driver was originally written by Hans-Gunter Lutke Uphues
  11  * <hg_lu@web.de> in 2001, with enhancements by Christoph Bartelmus
  12  * <lirc@bartelmus.de>, Andrew Calkin <r_tay@hotmail.com> and James Edwards
  13  * <jimbo-lirc@edwardsclan.net>.
  14  *
  15  * The lirc_ite8709 driver was written by Grégory Lardière
  16  * <spmf2004-lirc@yahoo.fr> in 2008.
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/pnp.h>
  22 #include <linux/io.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/sched.h>
  25 #include <linux/delay.h>
  26 #include <linux/slab.h>
  27 #include <linux/input.h>
  28 #include <linux/bitops.h>
  29 #include <media/rc-core.h>
  30 #include <linux/pci_ids.h>
  31
  32 #include "ite-cir.h"
  33
  34 /* module parameters */
  35
  36 /* default sample period */
  37 static long sample_period = NSEC_PER_SEC / 115200;
  38 module_param(sample_period, long, S_IRUGO | S_IWUSR);
  39 MODULE_PARM_DESC(sample_period, "sample period");
  40
  41 /* override detected model id */
  42 static int model_number = -1;
  43 module_param(model_number, int, S_IRUGO | S_IWUSR);
  44 MODULE_PARM_DESC(model_number, "Use this model number, don't autodetect");
  45
  46
  47 /* HW-independent code functions */
  48
  49 /* check whether carrier frequency is high frequency */
  50 static inline bool ite_is_high_carrier_freq(unsigned int freq)
  51 {
  52         return freq >= ITE_HCF_MIN_CARRIER_FREQ;
  53 }
  54
  55 /* get the bits required to program the carrier frequency in CFQ bits,
  56  * unshifted */
  57 static u8 ite_get_carrier_freq_bits(unsigned int freq)
  58 {
  59         if (ite_is_high_carrier_freq(freq)) {
  60                 if (freq < 425000)
  61                         return ITE_CFQ_400;
  62
  63                 else if (freq < 465000)
  64                         return ITE_CFQ_450;
  65
  66                 else if (freq < 490000)
  67                         return ITE_CFQ_480;
  68
  69                 else
  70                         return ITE_CFQ_500;
  71         } else {
  72                         /* trim to limits */
  73                 if (freq < ITE_LCF_MIN_CARRIER_FREQ)
  74                         freq = ITE_LCF_MIN_CARRIER_FREQ;
  75                 if (freq > ITE_LCF_MAX_CARRIER_FREQ)
  76                         freq = ITE_LCF_MAX_CARRIER_FREQ;
  77
  78                 /* convert to kHz and subtract the base freq */
  79                 freq = DIV_ROUND_CLOSEST(freq - ITE_LCF_MIN_CARRIER_FREQ, 1000);
  80
  81                 return (u8) freq;
  82         }
  83 }
  84
  85 /* get the bits required to program the pulse with in TXMPW */
  86 static u8 ite_get_pulse_width_bits(unsigned int freq, int duty_cycle)
  87 {
  88         unsigned long period_ns, on_ns;
  89
  90         /* sanitize freq into range */
  91         if (freq < ITE_LCF_MIN_CARRIER_FREQ)
  92                 freq = ITE_LCF_MIN_CARRIER_FREQ;
  93         if (freq > ITE_HCF_MAX_CARRIER_FREQ)
  94                 freq = ITE_HCF_MAX_CARRIER_FREQ;
  95
  96         period_ns = 1000000000UL / freq;
  97         on_ns = period_ns * duty_cycle / 100;
  98
  99         if (ite_is_high_carrier_freq(freq)) {
 100                 if (on_ns < 750)
 101                         return ITE_TXMPW_A;
 102
 103                 else if (on_ns < 850)
 104                         return ITE_TXMPW_B;
 105
 106                 else if (on_ns < 950)
 107                         return ITE_TXMPW_C;
 108
 109                 else if (on_ns < 1080)
 110                         return ITE_TXMPW_D;
 111
 112                 else
 113                         return ITE_TXMPW_E;
 114         } else {
 115                 if (on_ns < 6500)
 116                         return ITE_TXMPW_A;
 117
 118                 else if (on_ns < 7850)
 119                         return ITE_TXMPW_B;
 120
 121                 else if (on_ns < 9650)
 122                         return ITE_TXMPW_C;
 123
 124                 else if (on_ns < 11950)
 125                         return ITE_TXMPW_D;
 126
 127                 else
 128                         return ITE_TXMPW_E;
 129         }
 130 }
 131
 132 /* decode raw bytes as received by the hardware, and push them to the ir-core
 133  * layer */
 134 static void ite_decode_bytes(struct ite_dev *dev, const u8 * data, int
 135                              length)
 136 {
 137         unsigned long *ldata;
 138         unsigned int next_one, next_zero, size;
 139         struct ir_raw_event ev = {};
 140
 141         if (length == 0)
 142                 return;
 143
 144         ldata = (unsigned long *)data;
 145         size = length << 3;
 146         next_one = find_next_bit_le(ldata, size, 0);
 147         if (next_one > 0) {
 148                 ev.pulse = true;
 149                 ev.duration = ITE_BITS_TO_US(next_one, sample_period);
 150                 ir_raw_event_store_with_filter(dev->rdev, &ev);
 151         }
 152
 153         while (next_one < size) {
 154                 next_zero = find_next_zero_bit_le(ldata, size, next_one + 1);
 155                 ev.pulse = false;
 156                 ev.duration = ITE_BITS_TO_US(next_zero - next_one, sample_period);
 157                 ir_raw_event_store_with_filter(dev->rdev, &ev);
 158
 159                 if (next_zero < size) {
 160                         next_one = find_next_bit_le(ldata, size, next_zero + 1);
 161                         ev.pulse = true;
 162                         ev.duration = ITE_BITS_TO_US(next_one - next_zero,
 163                                                      sample_period);
 164                         ir_raw_event_store_with_filter(dev->rdev, &ev);
 165                 } else
 166                         next_one = size;
 167         }
 168
 169         ir_raw_event_handle(dev->rdev);
 170
 171         dev_dbg(&dev->rdev->dev, "decoded %d bytes\n", length);
 172 }
 173
 174 /* set all the rx/tx carrier parameters; this must be called with the device
 175  * spinlock held */
 176 static void ite_set_carrier_params(struct ite_dev *dev)
 177 {
 178         unsigned int freq, low_freq, high_freq;
 179         int allowance;
 180         bool use_demodulator;
 181         bool for_tx = dev->transmitting;
 182
 183         if (for_tx) {
 184                 /* we don't need no stinking calculations */
 185                 freq = dev->tx_carrier_freq;
 186                 allowance = ITE_RXDCR_DEFAULT;
 187                 use_demodulator = false;
 188         } else {
 189                 low_freq = dev->rx_low_carrier_freq;
 190                 high_freq = dev->rx_high_carrier_freq;
 191
 192                 if (low_freq == 0) {
 193                         /* don't demodulate */
 194                         freq = ITE_DEFAULT_CARRIER_FREQ;
 195                         allowance = ITE_RXDCR_DEFAULT;
 196                         use_demodulator = false;
 197                 } else {
 198                         /* calculate the middle freq */
 199                         freq = (low_freq + high_freq) / 2;
 200
 201                         /* calculate the allowance */
 202                         allowance =
 203                             DIV_ROUND_CLOSEST(10000 * (high_freq - low_freq),
 204                                               ITE_RXDCR_PER_10000_STEP
 205                                               * (high_freq + low_freq));
 206
 207                         if (allowance < 1)
 208                                 allowance = 1;
 209
 210                         if (allowance > ITE_RXDCR_MAX)
 211                                 allowance = ITE_RXDCR_MAX;
 212
 213                         use_demodulator = true;
 214                 }
 215         }
 216
 217         /* set the carrier parameters in a device-dependent way */
 218         dev->params->set_carrier_params(dev, ite_is_high_carrier_freq(freq),
 219                  use_demodulator, ite_get_carrier_freq_bits(freq), allowance,
 220                  ite_get_pulse_width_bits(freq, dev->tx_duty_cycle));
 221 }
 222
 223 /* interrupt service routine for incoming and outgoing CIR data */
 224 static irqreturn_t ite_cir_isr(int irq, void *data)
 225 {
 226         struct ite_dev *dev = data;
 227         irqreturn_t ret = IRQ_RETVAL(IRQ_NONE);
 228         u8 rx_buf[ITE_RX_FIFO_LEN];
 229         int rx_bytes;
 230         int iflags;
 231
 232         /* grab the spinlock */
 233         spin_lock(&dev->lock);
 234
 235         /* read the interrupt flags */
 236         iflags = dev->params->get_irq_causes(dev);
 237
 238         /* Check for RX overflow */
 239         if (iflags & ITE_IRQ_RX_FIFO_OVERRUN) {
 240                 dev_warn(&dev->rdev->dev, "receive overflow\n");
 241                 ir_raw_event_overflow(dev->rdev);
 242         }
 243
 244         /* check for the receive interrupt */
 245         if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) {
 246                 /* read the FIFO bytes */
 247                 rx_bytes = dev->params->get_rx_bytes(dev, rx_buf,
 248                                                     ITE_RX_FIFO_LEN);
 249
 250                 dev_dbg(&dev->rdev->dev, "interrupt %d RX bytes\n", rx_bytes);
 251
 252                 if (rx_bytes > 0) {
 253                         /* drop the spinlock, since the ir-core layer
 254                          * may call us back again through
 255                          * ite_s_idle() */
 256                         spin_unlock(&dev->lock);
 257
 258                         /* decode the data we've just received */
 259                         ite_decode_bytes(dev, rx_buf, rx_bytes);
 260
 261                         /* reacquire the spinlock */
 262                         spin_lock(&dev->lock);
 263
 264                         /* mark the interrupt as serviced */
 265                         ret = IRQ_RETVAL(IRQ_HANDLED);
 266                 }
 267         } else if (iflags & ITE_IRQ_TX_FIFO) {
 268                 /* FIFO space available interrupt */
 269                 dev_dbg(&dev->rdev->dev, "interrupt TX FIFO\n");
 270
 271                 /* wake any sleeping transmitter */
 272                 wake_up_interruptible(&dev->tx_queue);
 273
 274                 /* mark the interrupt as serviced */
 275                 ret = IRQ_RETVAL(IRQ_HANDLED);
 276         }
 277
 278         /* drop the spinlock */
 279         spin_unlock(&dev->lock);
 280
 281         return ret;
 282 }
 283
 284 /* set the rx carrier freq range, guess it's in Hz... */
 285 static int ite_set_rx_carrier_range(struct rc_dev *rcdev, u32 carrier_low, u32
 286                                     carrier_high)
 287 {
 288         unsigned long flags;
 289         struct ite_dev *dev = rcdev->priv;
 290
 291         spin_lock_irqsave(&dev->lock, flags);
 292         dev->rx_low_carrier_freq = carrier_low;
 293         dev->rx_high_carrier_freq = carrier_high;
 294         ite_set_carrier_params(dev);
 295         spin_unlock_irqrestore(&dev->lock, flags);
 296
 297         return 0;
 298 }
 299
 300 /* set the tx carrier freq, guess it's in Hz... */
 301 static int ite_set_tx_carrier(struct rc_dev *rcdev, u32 carrier)
 302 {
 303         unsigned long flags;
 304         struct ite_dev *dev = rcdev->priv;
 305
 306         spin_lock_irqsave(&dev->lock, flags);
 307         dev->tx_carrier_freq = carrier;
 308         ite_set_carrier_params(dev);
 309         spin_unlock_irqrestore(&dev->lock, flags);
 310
 311         return 0;
 312 }
 313
 314 /* set the tx duty cycle by controlling the pulse width */
 315 static int ite_set_tx_duty_cycle(struct rc_dev *rcdev, u32 duty_cycle)
 316 {
 317         unsigned long flags;
 318         struct ite_dev *dev = rcdev->priv;
 319
 320         spin_lock_irqsave(&dev->lock, flags);
 321         dev->tx_duty_cycle = duty_cycle;
 322         ite_set_carrier_params(dev);
 323         spin_unlock_irqrestore(&dev->lock, flags);
 324
 325         return 0;
 326 }
 327
 328 /* transmit out IR pulses; what you get here is a batch of alternating
 329  * pulse/space/pulse/space lengths that we should write out completely through
 330  * the FIFO, blocking on a full FIFO */
 331 static int ite_tx_ir(struct rc_dev *rcdev, unsigned *txbuf, unsigned n)
 332 {
 333         unsigned long flags;
 334         struct ite_dev *dev = rcdev->priv;
 335         bool is_pulse = false;
 336         int remaining_us, fifo_avail, fifo_remaining, last_idx = 0;
 337         int max_rle_us, next_rle_us;
 338         int ret = n;
 339         u8 last_sent[ITE_TX_FIFO_LEN];
 340         u8 val;
 341
 342         /* clear the array just in case */
 343         memset(last_sent, 0, sizeof(last_sent));
 344
 345         spin_lock_irqsave(&dev->lock, flags);
 346
 347         /* let everybody know we're now transmitting */
 348         dev->transmitting = true;
 349
 350         /* and set the carrier values for transmission */
 351         ite_set_carrier_params(dev);
 352
 353         /* calculate how much time we can send in one byte */
 354         max_rle_us =
 355             (ITE_BAUDRATE_DIVISOR * sample_period *
 356              ITE_TX_MAX_RLE) / 1000;
 357
 358         /* disable the receiver */
 359         dev->params->disable_rx(dev);
 360
 361         /* this is where we'll begin filling in the FIFO, until it's full.
 362          * then we'll just activate the interrupt, wait for it to wake us up
 363          * again, disable it, continue filling the FIFO... until everything
 364          * has been pushed out */
 365         fifo_avail = ITE_TX_FIFO_LEN - dev->params->get_tx_used_slots(dev);
 366
 367         while (n > 0) {
 368                 /* transmit the next sample */
 369                 is_pulse = !is_pulse;
 370                 remaining_us = *(txbuf++);
 371                 n--;
 372
 373                 dev_dbg(&dev->rdev->dev, "%s: %d\n",
 374                         is_pulse ? "pulse" : "space", remaining_us);
 375
 376                 /* repeat while the pulse is non-zero length */
 377                 while (remaining_us > 0) {
 378                         if (remaining_us > max_rle_us)
 379                                 next_rle_us = max_rle_us;
 380
 381                         else
 382                                 next_rle_us = remaining_us;
 383
 384                         remaining_us -= next_rle_us;
 385
 386                         /* check what's the length we have to pump out */
 387                         val = (ITE_TX_MAX_RLE * next_rle_us) / max_rle_us;
 388
 389                         /* put it into the sent buffer */
 390                         last_sent[last_idx++] = val;
 391                         last_idx &= (ITE_TX_FIFO_LEN);
 392
 393                         /* encode it for 7 bits */
 394                         val = (val - 1) & ITE_TX_RLE_MASK;
 395
 396                         /* take into account pulse/space prefix */
 397                         if (is_pulse)
 398                                 val |= ITE_TX_PULSE;
 399
 400                         else
 401                                 val |= ITE_TX_SPACE;
 402
 403                         /*
 404                          * if we get to 0 available, read again, just in case
 405                          * some other slot got freed
 406                          */
 407                         if (fifo_avail <= 0)
 408                                 fifo_avail = ITE_TX_FIFO_LEN - dev->params->get_tx_used_slots(dev);
 409
 410                         /* if it's still full */
 411                         if (fifo_avail <= 0) {
 412                                 /* enable the tx interrupt */
 413                                 dev->params->enable_tx_interrupt(dev);
 414
 415                                 /* drop the spinlock */
 416                                 spin_unlock_irqrestore(&dev->lock, flags);
 417
 418                                 /* wait for the FIFO to empty enough */
 419                                 wait_event_interruptible(dev->tx_queue,
 420                                         (fifo_avail = ITE_TX_FIFO_LEN - dev->params->get_tx_used_slots(dev)) >= 8);
 421
 422                                 /* get the spinlock again */
 423                                 spin_lock_irqsave(&dev->lock, flags);
 424
 425                                 /* disable the tx interrupt again. */
 426                                 dev->params->disable_tx_interrupt(dev);
 427                         }
 428
 429                         /* now send the byte through the FIFO */
 430                         dev->params->put_tx_byte(dev, val);
 431                         fifo_avail--;
 432                 }
 433         }
 434
 435         /* wait and don't return until the whole FIFO has been sent out;
 436          * otherwise we could configure the RX carrier params instead of the
 437          * TX ones while the transmission is still being performed! */
 438         fifo_remaining = dev->params->get_tx_used_slots(dev);
 439         remaining_us = 0;
 440         while (fifo_remaining > 0) {
 441                 fifo_remaining--;
 442                 last_idx--;
 443                 last_idx &= (ITE_TX_FIFO_LEN - 1);
 444                 remaining_us += last_sent[last_idx];
 445         }
 446         remaining_us = (remaining_us * max_rle_us) / (ITE_TX_MAX_RLE);
 447
 448         /* drop the spinlock while we sleep */
 449         spin_unlock_irqrestore(&dev->lock, flags);
 450
 451         /* sleep remaining_us microseconds */
 452         mdelay(DIV_ROUND_UP(remaining_us, 1000));
 453
 454         /* reacquire the spinlock */
 455         spin_lock_irqsave(&dev->lock, flags);
 456
 457         /* now we're not transmitting anymore */
 458         dev->transmitting = false;
 459
 460         /* and set the carrier values for reception */
 461         ite_set_carrier_params(dev);
 462
 463         /* re-enable the receiver */
 464         dev->params->enable_rx(dev);
 465
 466         /* notify transmission end */
 467         wake_up_interruptible(&dev->tx_ended);
 468
 469         spin_unlock_irqrestore(&dev->lock, flags);
 470
 471         return ret;
 472 }
 473
 474 /* idle the receiver if needed */
 475 static void ite_s_idle(struct rc_dev *rcdev, bool enable)
 476 {
 477         unsigned long flags;
 478         struct ite_dev *dev = rcdev->priv;
 479
 480         if (enable) {
 481                 spin_lock_irqsave(&dev->lock, flags);
 482                 dev->params->idle_rx(dev);
 483                 spin_unlock_irqrestore(&dev->lock, flags);
 484         }
 485 }
 486
 487
 488 /* IT8712F HW-specific functions */
 489
 490 /* retrieve a bitmask of the current causes for a pending interrupt; this may
 491  * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
 492  * */
 493 static int it87_get_irq_causes(struct ite_dev *dev)
 494 {
 495         u8 iflags;
 496         int ret = 0;
 497
 498         /* read the interrupt flags */
 499         iflags = inb(dev->cir_addr + IT87_IIR) & IT87_II;
 500
 501         switch (iflags) {
 502         case IT87_II_RXDS:
 503                 ret = ITE_IRQ_RX_FIFO;
 504                 break;
 505         case IT87_II_RXFO:
 506                 ret = ITE_IRQ_RX_FIFO_OVERRUN;
 507                 break;
 508         case IT87_II_TXLDL:
 509                 ret = ITE_IRQ_TX_FIFO;
 510                 break;
 511         }
 512
 513         return ret;
 514 }
 515
 516 /* set the carrier parameters; to be called with the spinlock held */
 517 static void it87_set_carrier_params(struct ite_dev *dev, bool high_freq,
 518                                     bool use_demodulator,
 519                                     u8 carrier_freq_bits, u8 allowance_bits,
 520                                     u8 pulse_width_bits)
 521 {
 522         u8 val;
 523
 524         /* program the RCR register */
 525         val = inb(dev->cir_addr + IT87_RCR)
 526                 & ~(IT87_HCFS | IT87_RXEND | IT87_RXDCR);
 527
 528         if (high_freq)
 529                 val |= IT87_HCFS;
 530
 531         if (use_demodulator)
 532                 val |= IT87_RXEND;
 533
 534         val |= allowance_bits;
 535
 536         outb(val, dev->cir_addr + IT87_RCR);
 537
 538         /* program the TCR2 register */
 539         outb((carrier_freq_bits << IT87_CFQ_SHIFT) | pulse_width_bits,
 540                 dev->cir_addr + IT87_TCR2);
 541 }
 542
 543 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
 544  * held */
 545 static int it87_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
 546 {
 547         int fifo, read = 0;
 548
 549         /* read how many bytes are still in the FIFO */
 550         fifo = inb(dev->cir_addr + IT87_RSR) & IT87_RXFBC;
 551
 552         while (fifo > 0 && buf_size > 0) {
 553                 *(buf++) = inb(dev->cir_addr + IT87_DR);
 554                 fifo--;
 555                 read++;
 556                 buf_size--;
 557         }
 558
 559         return read;
 560 }
 561
 562 /* return how many bytes are still in the FIFO; this will be called
 563  * with the device spinlock NOT HELD while waiting for the TX FIFO to get
 564  * empty; let's expect this won't be a problem */
 565 static int it87_get_tx_used_slots(struct ite_dev *dev)
 566 {
 567         return inb(dev->cir_addr + IT87_TSR) & IT87_TXFBC;
 568 }
 569
 570 /* put a byte to the TX fifo; this should be called with the spinlock held */
 571 static void it87_put_tx_byte(struct ite_dev *dev, u8 value)
 572 {
 573         outb(value, dev->cir_addr + IT87_DR);
 574 }
 575
 576 /* idle the receiver so that we won't receive samples until another
 577   pulse is detected; this must be called with the device spinlock held */
 578 static void it87_idle_rx(struct ite_dev *dev)
 579 {
 580         /* disable streaming by clearing RXACT writing it as 1 */
 581         outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXACT,
 582                 dev->cir_addr + IT87_RCR);
 583
 584         /* clear the FIFO */
 585         outb(inb(dev->cir_addr + IT87_TCR1) | IT87_FIFOCLR,
 586                 dev->cir_addr + IT87_TCR1);
 587 }
 588
 589 /* disable the receiver; this must be called with the device spinlock held */
 590 static void it87_disable_rx(struct ite_dev *dev)
 591 {
 592         /* disable the receiver interrupts */
 593         outb(inb(dev->cir_addr + IT87_IER) & ~(IT87_RDAIE | IT87_RFOIE),
 594                 dev->cir_addr + IT87_IER);
 595
 596         /* disable the receiver */
 597         outb(inb(dev->cir_addr + IT87_RCR) & ~IT87_RXEN,
 598                 dev->cir_addr + IT87_RCR);
 599
 600         /* clear the FIFO and RXACT (actually RXACT should have been cleared
 601         * in the previous outb() call) */
 602         it87_idle_rx(dev);
 603 }
 604
 605 /* enable the receiver; this must be called with the device spinlock held */
 606 static void it87_enable_rx(struct ite_dev *dev)
 607 {
 608         /* enable the receiver by setting RXEN */
 609         outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXEN,
 610                 dev->cir_addr + IT87_RCR);
 611
 612         /* just prepare it to idle for the next reception */
 613         it87_idle_rx(dev);
 614
 615         /* enable the receiver interrupts and master enable flag */
 616         outb(inb(dev->cir_addr + IT87_IER) | IT87_RDAIE | IT87_RFOIE | IT87_IEC,
 617                 dev->cir_addr + IT87_IER);
 618 }
 619
 620 /* disable the transmitter interrupt; this must be called with the device
 621  * spinlock held */
 622 static void it87_disable_tx_interrupt(struct ite_dev *dev)
 623 {
 624         /* disable the transmitter interrupts */
 625         outb(inb(dev->cir_addr + IT87_IER) & ~IT87_TLDLIE,
 626                 dev->cir_addr + IT87_IER);
 627 }
 628
 629 /* enable the transmitter interrupt; this must be called with the device
 630  * spinlock held */
 631 static void it87_enable_tx_interrupt(struct ite_dev *dev)
 632 {
 633         /* enable the transmitter interrupts and master enable flag */
 634         outb(inb(dev->cir_addr + IT87_IER) | IT87_TLDLIE | IT87_IEC,
 635                 dev->cir_addr + IT87_IER);
 636 }
 637
 638 /* disable the device; this must be called with the device spinlock held */
 639 static void it87_disable(struct ite_dev *dev)
 640 {
 641         /* clear out all interrupt enable flags */
 642         outb(inb(dev->cir_addr + IT87_IER) &
 643                 ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE),
 644                 dev->cir_addr + IT87_IER);
 645
 646         /* disable the receiver */
 647         it87_disable_rx(dev);
 648
 649         /* erase the FIFO */
 650         outb(IT87_FIFOCLR | inb(dev->cir_addr + IT87_TCR1),
 651                 dev->cir_addr + IT87_TCR1);
 652 }
 653
 654 /* initialize the hardware */
 655 static void it87_init_hardware(struct ite_dev *dev)
 656 {
 657         /* enable just the baud rate divisor register,
 658         disabling all the interrupts at the same time */
 659         outb((inb(dev->cir_addr + IT87_IER) &
 660                 ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE)) | IT87_BR,
 661                 dev->cir_addr + IT87_IER);
 662
 663         /* write out the baud rate divisor */
 664         outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT87_BDLR);
 665         outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff, dev->cir_addr + IT87_BDHR);
 666
 667         /* disable the baud rate divisor register again */
 668         outb(inb(dev->cir_addr + IT87_IER) & ~IT87_BR,
 669                 dev->cir_addr + IT87_IER);
 670
 671         /* program the RCR register defaults */
 672         outb(ITE_RXDCR_DEFAULT, dev->cir_addr + IT87_RCR);
 673
 674         /* program the TCR1 register */
 675         outb(IT87_TXMPM_DEFAULT | IT87_TXENDF | IT87_TXRLE
 676                 | IT87_FIFOTL_DEFAULT | IT87_FIFOCLR,
 677                 dev->cir_addr + IT87_TCR1);
 678
 679         /* program the carrier parameters */
 680         ite_set_carrier_params(dev);
 681 }
 682
 683 /* IT8512F on ITE8708 HW-specific functions */
 684
 685 /* retrieve a bitmask of the current causes for a pending interrupt; this may
 686  * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
 687  * */
 688 static int it8708_get_irq_causes(struct ite_dev *dev)
 689 {
 690         u8 iflags;
 691         int ret = 0;
 692
 693         /* read the interrupt flags */
 694         iflags = inb(dev->cir_addr + IT8708_C0IIR);
 695
 696         if (iflags & IT85_TLDLI)
 697                 ret |= ITE_IRQ_TX_FIFO;
 698         if (iflags & IT85_RDAI)
 699                 ret |= ITE_IRQ_RX_FIFO;
 700         if (iflags & IT85_RFOI)
 701                 ret |= ITE_IRQ_RX_FIFO_OVERRUN;
 702
 703         return ret;
 704 }
 705
 706 /* set the carrier parameters; to be called with the spinlock held */
 707 static void it8708_set_carrier_params(struct ite_dev *dev, bool high_freq,
 708                                       bool use_demodulator,
 709                                       u8 carrier_freq_bits, u8 allowance_bits,
 710                                       u8 pulse_width_bits)
 711 {
 712         u8 val;
 713
 714         /* program the C0CFR register, with HRAE=1 */
 715         outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE,
 716                 dev->cir_addr + IT8708_BANKSEL);
 717
 718         val = (inb(dev->cir_addr + IT8708_C0CFR)
 719                 & ~(IT85_HCFS | IT85_CFQ)) | carrier_freq_bits;
 720
 721         if (high_freq)
 722                 val |= IT85_HCFS;
 723
 724         outb(val, dev->cir_addr + IT8708_C0CFR);
 725
 726         outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE,
 727                    dev->cir_addr + IT8708_BANKSEL);
 728
 729         /* program the C0RCR register */
 730         val = inb(dev->cir_addr + IT8708_C0RCR)
 731                 & ~(IT85_RXEND | IT85_RXDCR);
 732
 733         if (use_demodulator)
 734                 val |= IT85_RXEND;
 735
 736         val |= allowance_bits;
 737
 738         outb(val, dev->cir_addr + IT8708_C0RCR);
 739
 740         /* program the C0TCR register */
 741         val = inb(dev->cir_addr + IT8708_C0TCR) & ~IT85_TXMPW;
 742         val |= pulse_width_bits;
 743         outb(val, dev->cir_addr + IT8708_C0TCR);
 744 }
 745
 746 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
 747  * held */
 748 static int it8708_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
 749 {
 750         int fifo, read = 0;
 751
 752         /* read how many bytes are still in the FIFO */
 753         fifo = inb(dev->cir_addr + IT8708_C0RFSR) & IT85_RXFBC;
 754
 755         while (fifo > 0 && buf_size > 0) {
 756                 *(buf++) = inb(dev->cir_addr + IT8708_C0DR);
 757                 fifo--;
 758                 read++;
 759                 buf_size--;
 760         }
 761
 762         return read;
 763 }
 764
 765 /* return how many bytes are still in the FIFO; this will be called
 766  * with the device spinlock NOT HELD while waiting for the TX FIFO to get
 767  * empty; let's expect this won't be a problem */
 768 static int it8708_get_tx_used_slots(struct ite_dev *dev)
 769 {
 770         return inb(dev->cir_addr + IT8708_C0TFSR) & IT85_TXFBC;
 771 }
 772
 773 /* put a byte to the TX fifo; this should be called with the spinlock held */
 774 static void it8708_put_tx_byte(struct ite_dev *dev, u8 value)
 775 {
 776         outb(value, dev->cir_addr + IT8708_C0DR);
 777 }
 778
 779 /* idle the receiver so that we won't receive samples until another
 780   pulse is detected; this must be called with the device spinlock held */
 781 static void it8708_idle_rx(struct ite_dev *dev)
 782 {
 783         /* disable streaming by clearing RXACT writing it as 1 */
 784         outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXACT,
 785                 dev->cir_addr + IT8708_C0RCR);
 786
 787         /* clear the FIFO */
 788         outb(inb(dev->cir_addr + IT8708_C0MSTCR) | IT85_FIFOCLR,
 789                 dev->cir_addr + IT8708_C0MSTCR);
 790 }
 791
 792 /* disable the receiver; this must be called with the device spinlock held */
 793 static void it8708_disable_rx(struct ite_dev *dev)
 794 {
 795         /* disable the receiver interrupts */
 796         outb(inb(dev->cir_addr + IT8708_C0IER) &
 797                 ~(IT85_RDAIE | IT85_RFOIE),
 798                 dev->cir_addr + IT8708_C0IER);
 799
 800         /* disable the receiver */
 801         outb(inb(dev->cir_addr + IT8708_C0RCR) & ~IT85_RXEN,
 802                 dev->cir_addr + IT8708_C0RCR);
 803
 804         /* clear the FIFO and RXACT (actually RXACT should have been cleared
 805          * in the previous outb() call) */
 806         it8708_idle_rx(dev);
 807 }
 808
 809 /* enable the receiver; this must be called with the device spinlock held */
 810 static void it8708_enable_rx(struct ite_dev *dev)
 811 {
 812         /* enable the receiver by setting RXEN */
 813         outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXEN,
 814                 dev->cir_addr + IT8708_C0RCR);
 815
 816         /* just prepare it to idle for the next reception */
 817         it8708_idle_rx(dev);
 818
 819         /* enable the receiver interrupts and master enable flag */
 820         outb(inb(dev->cir_addr + IT8708_C0IER)
 821                 |IT85_RDAIE | IT85_RFOIE | IT85_IEC,
 822                 dev->cir_addr + IT8708_C0IER);
 823 }
 824
 825 /* disable the transmitter interrupt; this must be called with the device
 826  * spinlock held */
 827 static void it8708_disable_tx_interrupt(struct ite_dev *dev)
 828 {
 829         /* disable the transmitter interrupts */
 830         outb(inb(dev->cir_addr + IT8708_C0IER) & ~IT85_TLDLIE,
 831                 dev->cir_addr + IT8708_C0IER);
 832 }
 833
 834 /* enable the transmitter interrupt; this must be called with the device
 835  * spinlock held */
 836 static void it8708_enable_tx_interrupt(struct ite_dev *dev)
 837 {
 838         /* enable the transmitter interrupts and master enable flag */
 839         outb(inb(dev->cir_addr + IT8708_C0IER)
 840                 |IT85_TLDLIE | IT85_IEC,
 841                 dev->cir_addr + IT8708_C0IER);
 842 }
 843
 844 /* disable the device; this must be called with the device spinlock held */
 845 static void it8708_disable(struct ite_dev *dev)
 846 {
 847         /* clear out all interrupt enable flags */
 848         outb(inb(dev->cir_addr + IT8708_C0IER) &
 849                 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
 850                 dev->cir_addr + IT8708_C0IER);
 851
 852         /* disable the receiver */
 853         it8708_disable_rx(dev);
 854
 855         /* erase the FIFO */
 856         outb(IT85_FIFOCLR | inb(dev->cir_addr + IT8708_C0MSTCR),
 857                 dev->cir_addr + IT8708_C0MSTCR);
 858 }
 859
 860 /* initialize the hardware */
 861 static void it8708_init_hardware(struct ite_dev *dev)
 862 {
 863         /* disable all the interrupts */
 864         outb(inb(dev->cir_addr + IT8708_C0IER) &
 865                 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
 866                 dev->cir_addr + IT8708_C0IER);
 867
 868         /* program the baud rate divisor */
 869         outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE,
 870                 dev->cir_addr + IT8708_BANKSEL);
 871
 872         outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT8708_C0BDLR);
 873         outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff,
 874                    dev->cir_addr + IT8708_C0BDHR);
 875
 876         outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE,
 877                    dev->cir_addr + IT8708_BANKSEL);
 878
 879         /* program the C0MSTCR register defaults */
 880         outb((inb(dev->cir_addr + IT8708_C0MSTCR) &
 881                         ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL |
 882                           IT85_FIFOCLR | IT85_RESET)) |
 883                        IT85_FIFOTL_DEFAULT,
 884                        dev->cir_addr + IT8708_C0MSTCR);
 885
 886         /* program the C0RCR register defaults */
 887         outb((inb(dev->cir_addr + IT8708_C0RCR) &
 888                         ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND |
 889                           IT85_RXACT | IT85_RXDCR)) |
 890                        ITE_RXDCR_DEFAULT,
 891                        dev->cir_addr + IT8708_C0RCR);
 892
 893         /* program the C0TCR register defaults */
 894         outb((inb(dev->cir_addr + IT8708_C0TCR) &
 895                         ~(IT85_TXMPM | IT85_TXMPW))
 896                        |IT85_TXRLE | IT85_TXENDF |
 897                        IT85_TXMPM_DEFAULT | IT85_TXMPW_DEFAULT,
 898                        dev->cir_addr + IT8708_C0TCR);
 899
 900         /* program the carrier parameters */
 901         ite_set_carrier_params(dev);
 902 }
 903
 904 /* IT8512F on ITE8709 HW-specific functions */
 905
 906 /* read a byte from the SRAM module */
 907 static inline u8 it8709_rm(struct ite_dev *dev, int index)
 908 {
 909         outb(index, dev->cir_addr + IT8709_RAM_IDX);
 910         return inb(dev->cir_addr + IT8709_RAM_VAL);
 911 }
 912
 913 /* write a byte to the SRAM module */
 914 static inline void it8709_wm(struct ite_dev *dev, u8 val, int index)
 915 {
 916         outb(index, dev->cir_addr + IT8709_RAM_IDX);
 917         outb(val, dev->cir_addr + IT8709_RAM_VAL);
 918 }
 919
 920 static void it8709_wait(struct ite_dev *dev)
 921 {
 922         int i = 0;
 923         /*
 924          * loop until device tells it's ready to continue
 925          * iterations count is usually ~750 but can sometimes achieve 13000
 926          */
 927         for (i = 0; i < 15000; i++) {
 928                 udelay(2);
 929                 if (it8709_rm(dev, IT8709_MODE) == IT8709_IDLE)
 930                         break;
 931         }
 932 }
 933
 934 /* read the value of a CIR register */
 935 static u8 it8709_rr(struct ite_dev *dev, int index)
 936 {
 937         /* just wait in case the previous access was a write */
 938         it8709_wait(dev);
 939         it8709_wm(dev, index, IT8709_REG_IDX);
 940         it8709_wm(dev, IT8709_READ, IT8709_MODE);
 941
 942         /* wait for the read data to be available */
 943         it8709_wait(dev);
 944
 945         /* return the read value */
 946         return it8709_rm(dev, IT8709_REG_VAL);
 947 }
 948
 949 /* write the value of a CIR register */
 950 static void it8709_wr(struct ite_dev *dev, u8 val, int index)
 951 {
 952         /* we wait before writing, and not afterwards, since this allows us to
 953          * pipeline the host CPU with the microcontroller */
 954         it8709_wait(dev);
 955         it8709_wm(dev, val, IT8709_REG_VAL);
 956         it8709_wm(dev, index, IT8709_REG_IDX);
 957         it8709_wm(dev, IT8709_WRITE, IT8709_MODE);
 958 }
 959
 960 /* retrieve a bitmask of the current causes for a pending interrupt; this may
 961  * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
 962  * */
 963 static int it8709_get_irq_causes(struct ite_dev *dev)
 964 {
 965         u8 iflags;
 966         int ret = 0;
 967
 968         /* read the interrupt flags */
 969         iflags = it8709_rm(dev, IT8709_IIR);
 970
 971         if (iflags & IT85_TLDLI)
 972                 ret |= ITE_IRQ_TX_FIFO;
 973         if (iflags & IT85_RDAI)
 974                 ret |= ITE_IRQ_RX_FIFO;
 975         if (iflags & IT85_RFOI)
 976                 ret |= ITE_IRQ_RX_FIFO_OVERRUN;
 977
 978         return ret;
 979 }
 980
 981 /* set the carrier parameters; to be called with the spinlock held */
 982 static void it8709_set_carrier_params(struct ite_dev *dev, bool high_freq,
 983                                       bool use_demodulator,
 984                                       u8 carrier_freq_bits, u8 allowance_bits,
 985                                       u8 pulse_width_bits)
 986 {
 987         u8 val;
 988
 989         val = (it8709_rr(dev, IT85_C0CFR)
 990                      &~(IT85_HCFS | IT85_CFQ)) |
 991             carrier_freq_bits;
 992
 993         if (high_freq)
 994                 val |= IT85_HCFS;
 995
 996         it8709_wr(dev, val, IT85_C0CFR);
 997
 998         /* program the C0RCR register */
 999         val = it8709_rr(dev, IT85_C0RCR)
1000                 & ~(IT85_RXEND | IT85_RXDCR);
1001
1002         if (use_demodulator)
1003                 val |= IT85_RXEND;
1004
1005         val |= allowance_bits;
1006
1007         it8709_wr(dev, val, IT85_C0RCR);
1008
1009         /* program the C0TCR register */
1010         val = it8709_rr(dev, IT85_C0TCR) & ~IT85_TXMPW;
1011         val |= pulse_width_bits;
1012         it8709_wr(dev, val, IT85_C0TCR);
1013 }
1014
1015 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
1016  * held */
1017 static int it8709_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
1018 {
1019         int fifo, read = 0;
1020
1021         /* read how many bytes are still in the FIFO */
1022         fifo = it8709_rm(dev, IT8709_RFSR) & IT85_RXFBC;
1023
1024         while (fifo > 0 && buf_size > 0) {
1025                 *(buf++) = it8709_rm(dev, IT8709_FIFO + read);
1026                 fifo--;
1027                 read++;
1028                 buf_size--;
1029         }
1030
1031         /* 'clear' the FIFO by setting the writing index to 0; this is
1032          * completely bound to be racy, but we can't help it, since it's a
1033          * limitation of the protocol */
1034         it8709_wm(dev, 0, IT8709_RFSR);
1035
1036         return read;
1037 }
1038
1039 /* return how many bytes are still in the FIFO; this will be called
1040  * with the device spinlock NOT HELD while waiting for the TX FIFO to get
1041  * empty; let's expect this won't be a problem */
1042 static int it8709_get_tx_used_slots(struct ite_dev *dev)
1043 {
1044         return it8709_rr(dev, IT85_C0TFSR) & IT85_TXFBC;
1045 }
1046
1047 /* put a byte to the TX fifo; this should be called with the spinlock held */
1048 static void it8709_put_tx_byte(struct ite_dev *dev, u8 value)
1049 {
1050         it8709_wr(dev, value, IT85_C0DR);
1051 }
1052
1053 /* idle the receiver so that we won't receive samples until another
1054   pulse is detected; this must be called with the device spinlock held */
1055 static void it8709_idle_rx(struct ite_dev *dev)
1056 {
1057         /* disable streaming by clearing RXACT writing it as 1 */
1058         it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXACT,
1059                             IT85_C0RCR);
1060
1061         /* clear the FIFO */
1062         it8709_wr(dev, it8709_rr(dev, IT85_C0MSTCR) | IT85_FIFOCLR,
1063                             IT85_C0MSTCR);
1064 }
1065
1066 /* disable the receiver; this must be called with the device spinlock held */
1067 static void it8709_disable_rx(struct ite_dev *dev)
1068 {
1069         /* disable the receiver interrupts */
1070         it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
1071                             ~(IT85_RDAIE | IT85_RFOIE),
1072                             IT85_C0IER);
1073
1074         /* disable the receiver */
1075         it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) & ~IT85_RXEN,
1076                             IT85_C0RCR);
1077
1078         /* clear the FIFO and RXACT (actually RXACT should have been cleared
1079          * in the previous it8709_wr(dev, ) call) */
1080         it8709_idle_rx(dev);
1081 }
1082
1083 /* enable the receiver; this must be called with the device spinlock held */
1084 static void it8709_enable_rx(struct ite_dev *dev)
1085 {
1086         /* enable the receiver by setting RXEN */
1087         it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXEN,
1088                             IT85_C0RCR);
1089
1090         /* just prepare it to idle for the next reception */
1091         it8709_idle_rx(dev);
1092
1093         /* enable the receiver interrupts and master enable flag */
1094         it8709_wr(dev, it8709_rr(dev, IT85_C0IER)
1095                             |IT85_RDAIE | IT85_RFOIE | IT85_IEC,
1096                             IT85_C0IER);
1097 }
1098
1099 /* disable the transmitter interrupt; this must be called with the device
1100  * spinlock held */
1101 static void it8709_disable_tx_interrupt(struct ite_dev *dev)
1102 {
1103         /* disable the transmitter interrupts */
1104         it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & ~IT85_TLDLIE,
1105                             IT85_C0IER);
1106 }
1107
1108 /* enable the transmitter interrupt; this must be called with the device
1109  * spinlock held */
1110 static void it8709_enable_tx_interrupt(struct ite_dev *dev)
1111 {
1112         /* enable the transmitter interrupts and master enable flag */
1113         it8709_wr(dev, it8709_rr(dev, IT85_C0IER)
1114                             |IT85_TLDLIE | IT85_IEC,
1115                             IT85_C0IER);
1116 }
1117
1118 /* disable the device; this must be called with the device spinlock held */
1119 static void it8709_disable(struct ite_dev *dev)
1120 {
1121         /* clear out all interrupt enable flags */
1122         it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
1123                         ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
1124                   IT85_C0IER);
1125
1126         /* disable the receiver */
1127         it8709_disable_rx(dev);
1128
1129         /* erase the FIFO */
1130         it8709_wr(dev, IT85_FIFOCLR | it8709_rr(dev, IT85_C0MSTCR),
1131                             IT85_C0MSTCR);
1132 }
1133
1134 /* initialize the hardware */
1135 static void it8709_init_hardware(struct ite_dev *dev)
1136 {
1137         /* disable all the interrupts */
1138         it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
1139                         ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
1140                   IT85_C0IER);
1141
1142         /* program the baud rate divisor */
1143         it8709_wr(dev, ITE_BAUDRATE_DIVISOR & 0xff, IT85_C0BDLR);
1144         it8709_wr(dev, (ITE_BAUDRATE_DIVISOR >> 8) & 0xff,
1145                         IT85_C0BDHR);
1146
1147         /* program the C0MSTCR register defaults */
1148         it8709_wr(dev, (it8709_rr(dev, IT85_C0MSTCR) &
1149                         ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL
1150                           | IT85_FIFOCLR | IT85_RESET)) | IT85_FIFOTL_DEFAULT,
1151                   IT85_C0MSTCR);
1152
1153         /* program the C0RCR register defaults */
1154         it8709_wr(dev, (it8709_rr(dev, IT85_C0RCR) &
1155                         ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND | IT85_RXACT
1156                           | IT85_RXDCR)) | ITE_RXDCR_DEFAULT,
1157                   IT85_C0RCR);
1158
1159         /* program the C0TCR register defaults */
1160         it8709_wr(dev, (it8709_rr(dev, IT85_C0TCR) & ~(IT85_TXMPM | IT85_TXMPW))
1161                         | IT85_TXRLE | IT85_TXENDF | IT85_TXMPM_DEFAULT
1162                         | IT85_TXMPW_DEFAULT,
1163                   IT85_C0TCR);
1164
1165         /* program the carrier parameters */
1166         ite_set_carrier_params(dev);
1167 }
1168
1169
1170 /* generic hardware setup/teardown code */
1171
1172 /* activate the device for use */
1173 static int ite_open(struct rc_dev *rcdev)
1174 {
1175         struct ite_dev *dev = rcdev->priv;
1176         unsigned long flags;
1177
1178         spin_lock_irqsave(&dev->lock, flags);
1179
1180         /* enable the receiver */
1181         dev->params->enable_rx(dev);
1182
1183         spin_unlock_irqrestore(&dev->lock, flags);
1184
1185         return 0;
1186 }
1187
1188 /* deactivate the device for use */
1189 static void ite_close(struct rc_dev *rcdev)
1190 {
1191         struct ite_dev *dev = rcdev->priv;
1192         unsigned long flags;
1193
1194         spin_lock_irqsave(&dev->lock, flags);
1195
1196         /* wait for any transmission to end */
1197         spin_unlock_irqrestore(&dev->lock, flags);
1198         wait_event_interruptible(dev->tx_ended, !dev->transmitting);
1199         spin_lock_irqsave(&dev->lock, flags);
1200
1201         dev->params->disable(dev);
1202
1203         spin_unlock_irqrestore(&dev->lock, flags);
1204 }
1205
1206 /* supported models and their parameters */
1207 static const struct ite_dev_params ite_dev_descs[] = {
1208         {       /* 0: ITE8704 */
1209                .model = "ITE8704 CIR transceiver",
1210                .io_region_size = IT87_IOREG_LENGTH,
1211                .io_rsrc_no = 0,
1212
1213                 /* operations */
1214                .get_irq_causes = it87_get_irq_causes,
1215                .enable_rx = it87_enable_rx,
1216                .idle_rx = it87_idle_rx,
1217                .disable_rx = it87_idle_rx,
1218                .get_rx_bytes = it87_get_rx_bytes,
1219                .enable_tx_interrupt = it87_enable_tx_interrupt,
1220                .disable_tx_interrupt = it87_disable_tx_interrupt,
1221                .get_tx_used_slots = it87_get_tx_used_slots,
1222                .put_tx_byte = it87_put_tx_byte,
1223                .disable = it87_disable,
1224                .init_hardware = it87_init_hardware,
1225                .set_carrier_params = it87_set_carrier_params,
1226                },
1227         {       /* 1: ITE8713 */
1228                .model = "ITE8713 CIR transceiver",
1229                .io_region_size = IT87_IOREG_LENGTH,
1230                .io_rsrc_no = 0,
1231
1232                 /* operations */
1233                .get_irq_causes = it87_get_irq_causes,
1234                .enable_rx = it87_enable_rx,
1235                .idle_rx = it87_idle_rx,
1236                .disable_rx = it87_idle_rx,
1237                .get_rx_bytes = it87_get_rx_bytes,
1238                .enable_tx_interrupt = it87_enable_tx_interrupt,
1239                .disable_tx_interrupt = it87_disable_tx_interrupt,
1240                .get_tx_used_slots = it87_get_tx_used_slots,
1241                .put_tx_byte = it87_put_tx_byte,
1242                .disable = it87_disable,
1243                .init_hardware = it87_init_hardware,
1244                .set_carrier_params = it87_set_carrier_params,
1245                },
1246         {       /* 2: ITE8708 */
1247                .model = "ITE8708 CIR transceiver",
1248                .io_region_size = IT8708_IOREG_LENGTH,
1249                .io_rsrc_no = 0,
1250
1251                 /* operations */
1252                .get_irq_causes = it8708_get_irq_causes,
1253                .enable_rx = it8708_enable_rx,
1254                .idle_rx = it8708_idle_rx,
1255                .disable_rx = it8708_idle_rx,
1256                .get_rx_bytes = it8708_get_rx_bytes,
1257                .enable_tx_interrupt = it8708_enable_tx_interrupt,
1258                .disable_tx_interrupt =
1259                it8708_disable_tx_interrupt,
1260                .get_tx_used_slots = it8708_get_tx_used_slots,
1261                .put_tx_byte = it8708_put_tx_byte,
1262                .disable = it8708_disable,
1263                .init_hardware = it8708_init_hardware,
1264                .set_carrier_params = it8708_set_carrier_params,
1265                },
1266         {       /* 3: ITE8709 */
1267                .model = "ITE8709 CIR transceiver",
1268                .io_region_size = IT8709_IOREG_LENGTH,
1269                .io_rsrc_no = 2,
1270
1271                 /* operations */
1272                .get_irq_causes = it8709_get_irq_causes,
1273                .enable_rx = it8709_enable_rx,
1274                .idle_rx = it8709_idle_rx,
1275                .disable_rx = it8709_idle_rx,
1276                .get_rx_bytes = it8709_get_rx_bytes,
1277                .enable_tx_interrupt = it8709_enable_tx_interrupt,
1278                .disable_tx_interrupt =
1279                it8709_disable_tx_interrupt,
1280                .get_tx_used_slots = it8709_get_tx_used_slots,
1281                .put_tx_byte = it8709_put_tx_byte,
1282                .disable = it8709_disable,
1283                .init_hardware = it8709_init_hardware,
1284                .set_carrier_params = it8709_set_carrier_params,
1285                },
1286 };
1287
1288 static const struct pnp_device_id ite_ids[] = {
1289         {"ITE8704", 0},         /* Default model */
1290         {"ITE8713", 1},         /* CIR found in EEEBox 1501U */
1291         {"ITE8708", 2},         /* Bridged IT8512 */
1292         {"ITE8709", 3},         /* SRAM-Bridged IT8512 */
1293         {"", 0},
1294 };
1295
1296 /* allocate memory, probe hardware, and initialize everything */
1297 static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
1298                      *dev_id)
1299 {
1300         const struct ite_dev_params *dev_desc = NULL;
1301         struct ite_dev *itdev = NULL;
1302         struct rc_dev *rdev = NULL;
1303         int ret = -ENOMEM;
1304         int model_no;
1305         int io_rsrc_no;
1306
1307         itdev = kzalloc(sizeof(struct ite_dev), GFP_KERNEL);
1308         if (!itdev)
1309                 return ret;
1310
1311         /* input device for IR remote (and tx) */
1312         rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
1313         if (!rdev)
1314                 goto exit_free_dev_rdev;
1315         itdev->rdev = rdev;
1316
1317         ret = -ENODEV;
1318
1319         /* get the model number */
1320         model_no = (int)dev_id->driver_data;
1321         dev_dbg(&pdev->dev, "Auto-detected model: %s\n",
1322                 ite_dev_descs[model_no].model);
1323
1324         if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) {
1325                 model_no = model_number;
1326                 dev_info(&pdev->dev, "model has been forced to: %s",
1327                          ite_dev_descs[model_no].model);
1328         }
1329
1330         /* get the description for the device */
1331         dev_desc = &ite_dev_descs[model_no];
1332         io_rsrc_no = dev_desc->io_rsrc_no;
1333
1334         /* validate pnp resources */
1335         if (!pnp_port_valid(pdev, io_rsrc_no) ||
1336             pnp_port_len(pdev, io_rsrc_no) < dev_desc->io_region_size) {
1337                 dev_err(&pdev->dev, "IR PNP Port not valid!\n");
1338                 goto exit_free_dev_rdev;
1339         }
1340
1341         if (!pnp_irq_valid(pdev, 0)) {
1342                 dev_err(&pdev->dev, "PNP IRQ not valid!\n");
1343                 goto exit_free_dev_rdev;
1344         }
1345
1346         /* store resource values */
1347         itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no);
1348         itdev->cir_irq = pnp_irq(pdev, 0);
1349
1350         /* initialize spinlocks */
1351         spin_lock_init(&itdev->lock);
1352
1353         /* set driver data into the pnp device */
1354         pnp_set_drvdata(pdev, itdev);
1355         itdev->pdev = pdev;
1356
1357         /* initialize waitqueues for transmission */
1358         init_waitqueue_head(&itdev->tx_queue);
1359         init_waitqueue_head(&itdev->tx_ended);
1360
1361         /* Set model-specific parameters */
1362         itdev->params = dev_desc;
1363
1364         /* set up hardware initial state */
1365         itdev->tx_duty_cycle = 33;
1366         itdev->tx_carrier_freq = ITE_DEFAULT_CARRIER_FREQ;
1367         itdev->params->init_hardware(itdev);
1368
1369         /* set up ir-core props */
1370         rdev->priv = itdev;
1371         rdev->dev.parent = &pdev->dev;
1372         rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
1373         rdev->open = ite_open;
1374         rdev->close = ite_close;
1375         rdev->s_idle = ite_s_idle;
1376         rdev->s_rx_carrier_range = ite_set_rx_carrier_range;
1377         /* FIFO threshold is 17 bytes, so 17 * 8 samples minimum */
1378         rdev->min_timeout = 17 * 8 * ITE_BAUDRATE_DIVISOR *
1379                             sample_period / 1000;
1380         rdev->timeout = IR_DEFAULT_TIMEOUT;
1381         rdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
1382         rdev->rx_resolution = ITE_BAUDRATE_DIVISOR * sample_period / 1000;
1383         rdev->tx_resolution = ITE_BAUDRATE_DIVISOR * sample_period / 1000;
1384
1385         /* set up transmitter related values */
1386         rdev->tx_ir = ite_tx_ir;
1387         rdev->s_tx_carrier = ite_set_tx_carrier;
1388         rdev->s_tx_duty_cycle = ite_set_tx_duty_cycle;
1389
1390         rdev->device_name = dev_desc->model;
1391         rdev->input_id.bustype = BUS_HOST;
1392         rdev->input_id.vendor = PCI_VENDOR_ID_ITE;
1393         rdev->input_id.product = 0;
1394         rdev->input_id.version = 0;
1395         rdev->driver_name = ITE_DRIVER_NAME;
1396         rdev->map_name = RC_MAP_RC6_MCE;
1397
1398         ret = rc_register_device(rdev);
1399         if (ret)
1400                 goto exit_free_dev_rdev;
1401
1402         ret = -EBUSY;
1403         /* now claim resources */
1404         if (!request_region(itdev->cir_addr,
1405                                 dev_desc->io_region_size, ITE_DRIVER_NAME))
1406                 goto exit_unregister_device;
1407
1408         if (request_irq(itdev->cir_irq, ite_cir_isr, IRQF_SHARED,
1409                         ITE_DRIVER_NAME, (void *)itdev))
1410                 goto exit_release_cir_addr;
1411
1412         return 0;
1413
1414 exit_release_cir_addr:
1415         release_region(itdev->cir_addr, itdev->params->io_region_size);
1416 exit_unregister_device:
1417         rc_unregister_device(rdev);
1418         rdev = NULL;
1419 exit_free_dev_rdev:
1420         rc_free_device(rdev);
1421         kfree(itdev);
1422
1423         return ret;
1424 }
1425
1426 static void ite_remove(struct pnp_dev *pdev)
1427 {
1428         struct ite_dev *dev = pnp_get_drvdata(pdev);
1429         unsigned long flags;
1430
1431         spin_lock_irqsave(&dev->lock, flags);
1432
1433         /* disable hardware */
1434         dev->params->disable(dev);
1435
1436         spin_unlock_irqrestore(&dev->lock, flags);
1437
1438         /* free resources */
1439         free_irq(dev->cir_irq, dev);
1440         release_region(dev->cir_addr, dev->params->io_region_size);
1441
1442         rc_unregister_device(dev->rdev);
1443
1444         kfree(dev);
1445 }
1446
1447 static int ite_suspend(struct pnp_dev *pdev, pm_message_t state)
1448 {
1449         struct ite_dev *dev = pnp_get_drvdata(pdev);
1450         unsigned long flags;
1451
1452         /* wait for any transmission to end */
1453         wait_event_interruptible(dev->tx_ended, !dev->transmitting);
1454
1455         spin_lock_irqsave(&dev->lock, flags);
1456
1457         /* disable all interrupts */
1458         dev->params->disable(dev);
1459
1460         spin_unlock_irqrestore(&dev->lock, flags);
1461
1462         return 0;
1463 }
1464
1465 static int ite_resume(struct pnp_dev *pdev)
1466 {
1467         struct ite_dev *dev = pnp_get_drvdata(pdev);
1468         unsigned long flags;
1469
1470         spin_lock_irqsave(&dev->lock, flags);
1471
1472         /* reinitialize hardware config registers */
1473         dev->params->init_hardware(dev);
1474         /* enable the receiver */
1475         dev->params->enable_rx(dev);
1476
1477         spin_unlock_irqrestore(&dev->lock, flags);
1478
1479         return 0;
1480 }
1481
1482 static void ite_shutdown(struct pnp_dev *pdev)
1483 {
1484         struct ite_dev *dev = pnp_get_drvdata(pdev);
1485         unsigned long flags;
1486
1487         spin_lock_irqsave(&dev->lock, flags);
1488
1489         /* disable all interrupts */
1490         dev->params->disable(dev);
1491
1492         spin_unlock_irqrestore(&dev->lock, flags);
1493 }
1494
1495 static struct pnp_driver ite_driver = {
1496         .name           = ITE_DRIVER_NAME,
1497         .id_table       = ite_ids,
1498         .probe          = ite_probe,
1499         .remove         = ite_remove,
1500         .suspend        = ite_suspend,
1501         .resume         = ite_resume,
1502         .shutdown       = ite_shutdown,
1503 };
1504
1505 MODULE_DEVICE_TABLE(pnp, ite_ids);
1506 MODULE_DESCRIPTION("ITE Tech Inc. IT8712F/ITE8512F CIR driver");
1507
1508 MODULE_AUTHOR("Juan J. Garcia de Soria <skandalfo@gmail.com>");
1509 MODULE_LICENSE("GPL");
1510
1511 module_pnp_driver(ite_driver);