1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Samsung S5P Multi Format Codec v 5.1
5 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
6 * Kamil Debski, <k.debski@samsung.com>
10 #include <linux/delay.h>
11 #include <linux/interrupt.h>
13 #include <linux/module.h>
14 #include <linux/platform_device.h>
15 #include <linux/sched.h>
16 #include <linux/slab.h>
17 #include <linux/videodev2.h>
18 #include <media/v4l2-event.h>
19 #include <linux/workqueue.h>
21 #include <linux/of_device.h>
22 #include <linux/of_reserved_mem.h>
23 #include <media/videobuf2-v4l2.h>
24 #include "s5p_mfc_common.h"
25 #include "s5p_mfc_ctrl.h"
26 #include "s5p_mfc_debug.h"
27 #include "s5p_mfc_dec.h"
28 #include "s5p_mfc_enc.h"
29 #include "s5p_mfc_intr.h"
30 #include "s5p_mfc_iommu.h"
31 #include "s5p_mfc_opr.h"
32 #include "s5p_mfc_cmd.h"
33 #include "s5p_mfc_pm.h"
35 #define S5P_MFC_DEC_NAME "s5p-mfc-dec"
36 #define S5P_MFC_ENC_NAME "s5p-mfc-enc"
39 module_param_named(debug, mfc_debug_level, int, S_IRUGO | S_IWUSR);
40 MODULE_PARM_DESC(debug, "Debug level - higher value produces more verbose messages");
42 static char *mfc_mem_size;
43 module_param_named(mem, mfc_mem_size, charp, 0644);
44 MODULE_PARM_DESC(mem, "Preallocated memory size for the firmware and context buffers");
46 /* Helper functions for interrupt processing */
48 /* Remove from hw execution round robin */
49 void clear_work_bit(struct s5p_mfc_ctx *ctx)
51 struct s5p_mfc_dev *dev = ctx->dev;
53 spin_lock(&dev->condlock);
54 __clear_bit(ctx->num, &dev->ctx_work_bits);
55 spin_unlock(&dev->condlock);
58 /* Add to hw execution round robin */
59 void set_work_bit(struct s5p_mfc_ctx *ctx)
61 struct s5p_mfc_dev *dev = ctx->dev;
63 spin_lock(&dev->condlock);
64 __set_bit(ctx->num, &dev->ctx_work_bits);
65 spin_unlock(&dev->condlock);
68 /* Remove from hw execution round robin */
69 void clear_work_bit_irqsave(struct s5p_mfc_ctx *ctx)
71 struct s5p_mfc_dev *dev = ctx->dev;
74 spin_lock_irqsave(&dev->condlock, flags);
75 __clear_bit(ctx->num, &dev->ctx_work_bits);
76 spin_unlock_irqrestore(&dev->condlock, flags);
79 /* Add to hw execution round robin */
80 void set_work_bit_irqsave(struct s5p_mfc_ctx *ctx)
82 struct s5p_mfc_dev *dev = ctx->dev;
85 spin_lock_irqsave(&dev->condlock, flags);
86 __set_bit(ctx->num, &dev->ctx_work_bits);
87 spin_unlock_irqrestore(&dev->condlock, flags);
90 int s5p_mfc_get_new_ctx(struct s5p_mfc_dev *dev)
95 spin_lock_irqsave(&dev->condlock, flags);
98 ctx = (ctx + 1) % MFC_NUM_CONTEXTS;
99 if (ctx == dev->curr_ctx) {
100 if (!test_bit(ctx, &dev->ctx_work_bits))
104 } while (!test_bit(ctx, &dev->ctx_work_bits));
105 spin_unlock_irqrestore(&dev->condlock, flags);
110 /* Wake up context wait_queue */
111 static void wake_up_ctx(struct s5p_mfc_ctx *ctx, unsigned int reason,
115 ctx->int_type = reason;
117 wake_up(&ctx->queue);
120 /* Wake up device wait_queue */
121 static void wake_up_dev(struct s5p_mfc_dev *dev, unsigned int reason,
125 dev->int_type = reason;
127 wake_up(&dev->queue);
130 void s5p_mfc_cleanup_queue(struct list_head *lh, struct vb2_queue *vq)
132 struct s5p_mfc_buf *b;
135 while (!list_empty(lh)) {
136 b = list_entry(lh->next, struct s5p_mfc_buf, list);
137 for (i = 0; i < b->b->vb2_buf.num_planes; i++)
138 vb2_set_plane_payload(&b->b->vb2_buf, i, 0);
139 vb2_buffer_done(&b->b->vb2_buf, VB2_BUF_STATE_ERROR);
144 static void s5p_mfc_watchdog(struct timer_list *t)
146 struct s5p_mfc_dev *dev = from_timer(dev, t, watchdog_timer);
148 if (test_bit(0, &dev->hw_lock))
149 atomic_inc(&dev->watchdog_cnt);
150 if (atomic_read(&dev->watchdog_cnt) >= MFC_WATCHDOG_CNT) {
151 /* This means that hw is busy and no interrupts were
152 * generated by hw for the Nth time of running this
153 * watchdog timer. This usually means a serious hw
154 * error. Now it is time to kill all instances and
156 mfc_err("Time out during waiting for HW\n");
157 schedule_work(&dev->watchdog_work);
159 dev->watchdog_timer.expires = jiffies +
160 msecs_to_jiffies(MFC_WATCHDOG_INTERVAL);
161 add_timer(&dev->watchdog_timer);
164 static void s5p_mfc_watchdog_worker(struct work_struct *work)
166 struct s5p_mfc_dev *dev;
167 struct s5p_mfc_ctx *ctx;
172 dev = container_of(work, struct s5p_mfc_dev, watchdog_work);
174 mfc_err("Driver timeout error handling\n");
175 /* Lock the mutex that protects open and release.
176 * This is necessary as they may load and unload firmware. */
177 mutex_locked = mutex_trylock(&dev->mfc_mutex);
179 mfc_err("Error: some instance may be closing/opening\n");
180 spin_lock_irqsave(&dev->irqlock, flags);
184 for (i = 0; i < MFC_NUM_CONTEXTS; i++) {
188 ctx->state = MFCINST_ERROR;
189 s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst);
190 s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src);
192 wake_up_ctx(ctx, S5P_MFC_R2H_CMD_ERR_RET, 0);
194 clear_bit(0, &dev->hw_lock);
195 spin_unlock_irqrestore(&dev->irqlock, flags);
198 s5p_mfc_deinit_hw(dev);
200 /* Double check if there is at least one instance running.
201 * If no instance is in memory than no firmware should be present */
202 if (dev->num_inst > 0) {
203 ret = s5p_mfc_load_firmware(dev);
205 mfc_err("Failed to reload FW\n");
209 ret = s5p_mfc_init_hw(dev);
212 mfc_err("Failed to reinit FW\n");
216 mutex_unlock(&dev->mfc_mutex);
219 static void s5p_mfc_handle_frame_all_extracted(struct s5p_mfc_ctx *ctx)
221 struct s5p_mfc_buf *dst_buf;
222 struct s5p_mfc_dev *dev = ctx->dev;
224 ctx->state = MFCINST_FINISHED;
226 while (!list_empty(&ctx->dst_queue)) {
227 dst_buf = list_entry(ctx->dst_queue.next,
228 struct s5p_mfc_buf, list);
229 mfc_debug(2, "Cleaning up buffer: %d\n",
230 dst_buf->b->vb2_buf.index);
231 vb2_set_plane_payload(&dst_buf->b->vb2_buf, 0, 0);
232 vb2_set_plane_payload(&dst_buf->b->vb2_buf, 1, 0);
233 list_del(&dst_buf->list);
234 dst_buf->flags |= MFC_BUF_FLAG_EOS;
235 ctx->dst_queue_cnt--;
236 dst_buf->b->sequence = (ctx->sequence++);
238 if (s5p_mfc_hw_call(dev->mfc_ops, get_pic_type_top, ctx) ==
239 s5p_mfc_hw_call(dev->mfc_ops, get_pic_type_bot, ctx))
240 dst_buf->b->field = V4L2_FIELD_NONE;
242 dst_buf->b->field = V4L2_FIELD_INTERLACED;
243 dst_buf->b->flags |= V4L2_BUF_FLAG_LAST;
245 ctx->dec_dst_flag &= ~(1 << dst_buf->b->vb2_buf.index);
246 vb2_buffer_done(&dst_buf->b->vb2_buf, VB2_BUF_STATE_DONE);
250 static void s5p_mfc_handle_frame_copy_time(struct s5p_mfc_ctx *ctx)
252 struct s5p_mfc_dev *dev = ctx->dev;
253 struct s5p_mfc_buf *dst_buf, *src_buf;
255 unsigned int frame_type;
257 /* Make sure we actually have a new frame before continuing. */
258 frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_dec_frame_type, dev);
259 if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED)
261 dec_y_addr = (u32)s5p_mfc_hw_call(dev->mfc_ops, get_dec_y_adr, dev);
263 /* Copy timestamp / timecode from decoded src to dst and set
264 appropriate flags. */
265 src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
266 list_for_each_entry(dst_buf, &ctx->dst_queue, list) {
267 u32 addr = (u32)vb2_dma_contig_plane_dma_addr(&dst_buf->b->vb2_buf, 0);
269 if (addr == dec_y_addr) {
270 dst_buf->b->timecode = src_buf->b->timecode;
271 dst_buf->b->vb2_buf.timestamp =
272 src_buf->b->vb2_buf.timestamp;
274 ~V4L2_BUF_FLAG_TSTAMP_SRC_MASK;
277 & V4L2_BUF_FLAG_TSTAMP_SRC_MASK;
278 switch (frame_type) {
279 case S5P_FIMV_DECODE_FRAME_I_FRAME:
281 V4L2_BUF_FLAG_KEYFRAME;
283 case S5P_FIMV_DECODE_FRAME_P_FRAME:
285 V4L2_BUF_FLAG_PFRAME;
287 case S5P_FIMV_DECODE_FRAME_B_FRAME:
289 V4L2_BUF_FLAG_BFRAME;
292 /* Don't know how to handle
293 S5P_FIMV_DECODE_FRAME_OTHER_FRAME. */
294 mfc_debug(2, "Unexpected frame type: %d\n",
302 static void s5p_mfc_handle_frame_new(struct s5p_mfc_ctx *ctx, unsigned int err)
304 struct s5p_mfc_dev *dev = ctx->dev;
305 struct s5p_mfc_buf *dst_buf;
307 unsigned int frame_type;
309 dspl_y_addr = (u32)s5p_mfc_hw_call(dev->mfc_ops, get_dspl_y_adr, dev);
310 if (IS_MFCV6_PLUS(dev))
311 frame_type = s5p_mfc_hw_call(dev->mfc_ops,
312 get_disp_frame_type, ctx);
314 frame_type = s5p_mfc_hw_call(dev->mfc_ops,
315 get_dec_frame_type, dev);
317 /* If frame is same as previous then skip and do not dequeue */
318 if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED) {
319 if (!ctx->after_packed_pb)
321 ctx->after_packed_pb = 0;
325 /* The MFC returns address of the buffer, now we have to
326 * check which videobuf does it correspond to */
327 list_for_each_entry(dst_buf, &ctx->dst_queue, list) {
328 u32 addr = (u32)vb2_dma_contig_plane_dma_addr(&dst_buf->b->vb2_buf, 0);
330 /* Check if this is the buffer we're looking for */
331 if (addr == dspl_y_addr) {
332 list_del(&dst_buf->list);
333 ctx->dst_queue_cnt--;
334 dst_buf->b->sequence = ctx->sequence;
335 if (s5p_mfc_hw_call(dev->mfc_ops,
336 get_pic_type_top, ctx) ==
337 s5p_mfc_hw_call(dev->mfc_ops,
338 get_pic_type_bot, ctx))
339 dst_buf->b->field = V4L2_FIELD_NONE;
342 V4L2_FIELD_INTERLACED;
343 vb2_set_plane_payload(&dst_buf->b->vb2_buf, 0,
345 vb2_set_plane_payload(&dst_buf->b->vb2_buf, 1,
347 clear_bit(dst_buf->b->vb2_buf.index,
350 vb2_buffer_done(&dst_buf->b->vb2_buf, err ?
351 VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
358 /* Handle frame decoding interrupt */
359 static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx,
360 unsigned int reason, unsigned int err)
362 struct s5p_mfc_dev *dev = ctx->dev;
363 unsigned int dst_frame_status;
364 unsigned int dec_frame_status;
365 struct s5p_mfc_buf *src_buf;
366 unsigned int res_change;
368 dst_frame_status = s5p_mfc_hw_call(dev->mfc_ops, get_dspl_status, dev)
369 & S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK;
370 dec_frame_status = s5p_mfc_hw_call(dev->mfc_ops, get_dec_status, dev)
371 & S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK;
372 res_change = (s5p_mfc_hw_call(dev->mfc_ops, get_dspl_status, dev)
373 & S5P_FIMV_DEC_STATUS_RESOLUTION_MASK)
374 >> S5P_FIMV_DEC_STATUS_RESOLUTION_SHIFT;
375 mfc_debug(2, "Frame Status: %x\n", dst_frame_status);
376 if (ctx->state == MFCINST_RES_CHANGE_INIT)
377 ctx->state = MFCINST_RES_CHANGE_FLUSH;
378 if (res_change == S5P_FIMV_RES_INCREASE ||
379 res_change == S5P_FIMV_RES_DECREASE) {
380 ctx->state = MFCINST_RES_CHANGE_INIT;
381 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
382 wake_up_ctx(ctx, reason, err);
383 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
385 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
388 if (ctx->dpb_flush_flag)
389 ctx->dpb_flush_flag = 0;
391 /* All frames remaining in the buffer have been extracted */
392 if (dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_EMPTY) {
393 if (ctx->state == MFCINST_RES_CHANGE_FLUSH) {
394 static const struct v4l2_event ev_src_ch = {
395 .type = V4L2_EVENT_SOURCE_CHANGE,
396 .u.src_change.changes =
397 V4L2_EVENT_SRC_CH_RESOLUTION,
400 s5p_mfc_handle_frame_all_extracted(ctx);
401 ctx->state = MFCINST_RES_CHANGE_END;
402 v4l2_event_queue_fh(&ctx->fh, &ev_src_ch);
404 goto leave_handle_frame;
406 s5p_mfc_handle_frame_all_extracted(ctx);
410 if (dec_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY)
411 s5p_mfc_handle_frame_copy_time(ctx);
413 /* A frame has been decoded and is in the buffer */
414 if (dst_frame_status == S5P_FIMV_DEC_STATUS_DISPLAY_ONLY ||
415 dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY) {
416 s5p_mfc_handle_frame_new(ctx, err);
418 mfc_debug(2, "No frame decode\n");
420 /* Mark source buffer as complete */
421 if (dst_frame_status != S5P_FIMV_DEC_STATUS_DISPLAY_ONLY
422 && !list_empty(&ctx->src_queue)) {
423 src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf,
425 ctx->consumed_stream += s5p_mfc_hw_call(dev->mfc_ops,
426 get_consumed_stream, dev);
427 if (ctx->codec_mode != S5P_MFC_CODEC_H264_DEC &&
428 ctx->codec_mode != S5P_MFC_CODEC_VP8_DEC &&
429 ctx->consumed_stream + STUFF_BYTE <
430 src_buf->b->vb2_buf.planes[0].bytesused) {
431 /* Run MFC again on the same buffer */
432 mfc_debug(2, "Running again the same buffer\n");
433 ctx->after_packed_pb = 1;
435 mfc_debug(2, "MFC needs next buffer\n");
436 ctx->consumed_stream = 0;
437 if (src_buf->flags & MFC_BUF_FLAG_EOS)
438 ctx->state = MFCINST_FINISHING;
439 list_del(&src_buf->list);
440 ctx->src_queue_cnt--;
441 if (s5p_mfc_hw_call(dev->mfc_ops, err_dec, err) > 0)
442 vb2_buffer_done(&src_buf->b->vb2_buf,
443 VB2_BUF_STATE_ERROR);
445 vb2_buffer_done(&src_buf->b->vb2_buf,
450 if ((ctx->src_queue_cnt == 0 && ctx->state != MFCINST_FINISHING)
451 || ctx->dst_queue_cnt < ctx->pb_count)
453 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
454 wake_up_ctx(ctx, reason, err);
455 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
457 /* if suspending, wake up device and do not try_run again*/
458 if (test_bit(0, &dev->enter_suspend))
459 wake_up_dev(dev, reason, err);
461 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
464 /* Error handling for interrupt */
465 static void s5p_mfc_handle_error(struct s5p_mfc_dev *dev,
466 struct s5p_mfc_ctx *ctx, unsigned int reason, unsigned int err)
468 mfc_err("Interrupt Error: %08x\n", err);
471 /* Error recovery is dependent on the state of context */
472 switch (ctx->state) {
473 case MFCINST_RES_CHANGE_INIT:
474 case MFCINST_RES_CHANGE_FLUSH:
475 case MFCINST_RES_CHANGE_END:
476 case MFCINST_FINISHING:
477 case MFCINST_FINISHED:
478 case MFCINST_RUNNING:
479 /* It is highly probable that an error occurred
480 * while decoding a frame */
482 ctx->state = MFCINST_ERROR;
483 /* Mark all dst buffers as having an error */
484 s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst);
485 /* Mark all src buffers as having an error */
486 s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src);
487 wake_up_ctx(ctx, reason, err);
491 ctx->state = MFCINST_ERROR;
492 wake_up_ctx(ctx, reason, err);
496 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
497 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
499 wake_up_dev(dev, reason, err);
502 /* Header parsing interrupt handling */
503 static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx,
504 unsigned int reason, unsigned int err)
506 struct s5p_mfc_dev *dev;
511 if (ctx->c_ops->post_seq_start) {
512 if (ctx->c_ops->post_seq_start(ctx))
513 mfc_err("post_seq_start() failed\n");
515 ctx->img_width = s5p_mfc_hw_call(dev->mfc_ops, get_img_width,
517 ctx->img_height = s5p_mfc_hw_call(dev->mfc_ops, get_img_height,
520 s5p_mfc_hw_call(dev->mfc_ops, dec_calc_dpb_size, ctx);
522 ctx->pb_count = s5p_mfc_hw_call(dev->mfc_ops, get_dpb_count,
524 ctx->mv_count = s5p_mfc_hw_call(dev->mfc_ops, get_mv_count,
526 if (FW_HAS_E_MIN_SCRATCH_BUF(dev))
527 ctx->scratch_buf_size = s5p_mfc_hw_call(dev->mfc_ops,
528 get_min_scratch_buf_size, dev);
529 if (ctx->img_width == 0 || ctx->img_height == 0)
530 ctx->state = MFCINST_ERROR;
532 ctx->state = MFCINST_HEAD_PARSED;
534 if ((ctx->codec_mode == S5P_MFC_CODEC_H264_DEC ||
535 ctx->codec_mode == S5P_MFC_CODEC_H264_MVC_DEC) &&
536 !list_empty(&ctx->src_queue)) {
537 struct s5p_mfc_buf *src_buf;
538 src_buf = list_entry(ctx->src_queue.next,
539 struct s5p_mfc_buf, list);
540 if (s5p_mfc_hw_call(dev->mfc_ops, get_consumed_stream,
542 src_buf->b->vb2_buf.planes[0].bytesused)
543 ctx->head_processed = 0;
545 ctx->head_processed = 1;
547 ctx->head_processed = 1;
550 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
552 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
554 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
555 wake_up_ctx(ctx, reason, err);
558 /* Header parsing interrupt handling */
559 static void s5p_mfc_handle_init_buffers(struct s5p_mfc_ctx *ctx,
560 unsigned int reason, unsigned int err)
562 struct s5p_mfc_buf *src_buf;
563 struct s5p_mfc_dev *dev;
568 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
569 ctx->int_type = reason;
574 ctx->state = MFCINST_RUNNING;
575 if (!ctx->dpb_flush_flag && ctx->head_processed) {
576 if (!list_empty(&ctx->src_queue)) {
577 src_buf = list_entry(ctx->src_queue.next,
578 struct s5p_mfc_buf, list);
579 list_del(&src_buf->list);
580 ctx->src_queue_cnt--;
581 vb2_buffer_done(&src_buf->b->vb2_buf,
585 ctx->dpb_flush_flag = 0;
587 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
591 wake_up(&ctx->queue);
592 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
594 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
598 wake_up(&ctx->queue);
602 static void s5p_mfc_handle_stream_complete(struct s5p_mfc_ctx *ctx)
604 struct s5p_mfc_dev *dev = ctx->dev;
605 struct s5p_mfc_buf *mb_entry;
607 mfc_debug(2, "Stream completed\n");
609 ctx->state = MFCINST_FINISHED;
611 if (!list_empty(&ctx->dst_queue)) {
612 mb_entry = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf,
614 list_del(&mb_entry->list);
615 ctx->dst_queue_cnt--;
616 vb2_set_plane_payload(&mb_entry->b->vb2_buf, 0, 0);
617 vb2_buffer_done(&mb_entry->b->vb2_buf, VB2_BUF_STATE_DONE);
622 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
625 wake_up(&ctx->queue);
626 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
629 /* Interrupt processing */
630 static irqreturn_t s5p_mfc_irq(int irq, void *priv)
632 struct s5p_mfc_dev *dev = priv;
633 struct s5p_mfc_ctx *ctx;
638 /* Reset the timeout watchdog */
639 atomic_set(&dev->watchdog_cnt, 0);
640 spin_lock(&dev->irqlock);
641 ctx = dev->ctx[dev->curr_ctx];
642 /* Get the reason of interrupt and the error code */
643 reason = s5p_mfc_hw_call(dev->mfc_ops, get_int_reason, dev);
644 err = s5p_mfc_hw_call(dev->mfc_ops, get_int_err, dev);
645 mfc_debug(1, "Int reason: %d (err: %08x)\n", reason, err);
647 case S5P_MFC_R2H_CMD_ERR_RET:
648 /* An error has occurred */
649 if (ctx->state == MFCINST_RUNNING &&
650 (s5p_mfc_hw_call(dev->mfc_ops, err_dec, err) >=
652 err == S5P_FIMV_ERR_NO_VALID_SEQ_HDR ||
653 err == S5P_FIMV_ERR_INCOMPLETE_FRAME ||
654 err == S5P_FIMV_ERR_TIMEOUT))
655 s5p_mfc_handle_frame(ctx, reason, err);
657 s5p_mfc_handle_error(dev, ctx, reason, err);
658 clear_bit(0, &dev->enter_suspend);
661 case S5P_MFC_R2H_CMD_SLICE_DONE_RET:
662 case S5P_MFC_R2H_CMD_FIELD_DONE_RET:
663 case S5P_MFC_R2H_CMD_FRAME_DONE_RET:
664 if (ctx->c_ops->post_frame_start) {
665 if (ctx->c_ops->post_frame_start(ctx))
666 mfc_err("post_frame_start() failed\n");
668 if (ctx->state == MFCINST_FINISHING &&
669 list_empty(&ctx->ref_queue)) {
670 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
671 s5p_mfc_handle_stream_complete(ctx);
674 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
675 WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
677 wake_up_ctx(ctx, reason, err);
678 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
680 s5p_mfc_handle_frame(ctx, reason, err);
684 case S5P_MFC_R2H_CMD_SEQ_DONE_RET:
685 s5p_mfc_handle_seq_done(ctx, reason, err);
688 case S5P_MFC_R2H_CMD_OPEN_INSTANCE_RET:
689 ctx->inst_no = s5p_mfc_hw_call(dev->mfc_ops, get_inst_no, dev);
690 ctx->state = MFCINST_GOT_INST;
693 case S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET:
694 ctx->inst_no = MFC_NO_INSTANCE_SET;
695 ctx->state = MFCINST_FREE;
698 case S5P_MFC_R2H_CMD_SYS_INIT_RET:
699 case S5P_MFC_R2H_CMD_FW_STATUS_RET:
700 case S5P_MFC_R2H_CMD_SLEEP_RET:
701 case S5P_MFC_R2H_CMD_WAKEUP_RET:
704 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
705 clear_bit(0, &dev->hw_lock);
706 clear_bit(0, &dev->enter_suspend);
707 wake_up_dev(dev, reason, err);
710 case S5P_MFC_R2H_CMD_INIT_BUFFERS_RET:
711 s5p_mfc_handle_init_buffers(ctx, reason, err);
714 case S5P_MFC_R2H_CMD_COMPLETE_SEQ_RET:
715 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
716 ctx->int_type = reason;
718 s5p_mfc_handle_stream_complete(ctx);
721 case S5P_MFC_R2H_CMD_DPB_FLUSH_RET:
722 ctx->state = MFCINST_RUNNING;
726 mfc_debug(2, "Unknown int reason\n");
727 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
729 spin_unlock(&dev->irqlock);
733 s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
734 ctx->int_type = reason;
737 if (test_and_clear_bit(0, &dev->hw_lock) == 0)
738 mfc_err("Failed to unlock hw\n");
742 wake_up(&ctx->queue);
744 s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
745 spin_unlock(&dev->irqlock);
746 mfc_debug(2, "Exit via irq_cleanup_hw\n");
750 /* Open an MFC node */
751 static int s5p_mfc_open(struct file *file)
753 struct video_device *vdev = video_devdata(file);
754 struct s5p_mfc_dev *dev = video_drvdata(file);
755 struct s5p_mfc_ctx *ctx = NULL;
760 if (mutex_lock_interruptible(&dev->mfc_mutex))
762 dev->num_inst++; /* It is guarded by mfc_mutex in vfd */
763 /* Allocate memory for context */
764 ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
769 init_waitqueue_head(&ctx->queue);
770 v4l2_fh_init(&ctx->fh, vdev);
771 file->private_data = &ctx->fh;
772 v4l2_fh_add(&ctx->fh);
774 INIT_LIST_HEAD(&ctx->src_queue);
775 INIT_LIST_HEAD(&ctx->dst_queue);
776 ctx->src_queue_cnt = 0;
777 ctx->dst_queue_cnt = 0;
778 /* Get context number */
780 while (dev->ctx[ctx->num]) {
782 if (ctx->num >= MFC_NUM_CONTEXTS) {
783 mfc_debug(2, "Too many open contexts\n");
788 /* Mark context as idle */
789 clear_work_bit_irqsave(ctx);
790 dev->ctx[ctx->num] = ctx;
791 if (vdev == dev->vfd_dec) {
792 ctx->type = MFCINST_DECODER;
793 ctx->c_ops = get_dec_codec_ops();
794 s5p_mfc_dec_init(ctx);
795 /* Setup ctrl handler */
796 ret = s5p_mfc_dec_ctrls_setup(ctx);
798 mfc_err("Failed to setup mfc controls\n");
799 goto err_ctrls_setup;
801 } else if (vdev == dev->vfd_enc) {
802 ctx->type = MFCINST_ENCODER;
803 ctx->c_ops = get_enc_codec_ops();
804 /* only for encoder */
805 INIT_LIST_HEAD(&ctx->ref_queue);
806 ctx->ref_queue_cnt = 0;
807 s5p_mfc_enc_init(ctx);
808 /* Setup ctrl handler */
809 ret = s5p_mfc_enc_ctrls_setup(ctx);
811 mfc_err("Failed to setup mfc controls\n");
812 goto err_ctrls_setup;
818 ctx->fh.ctrl_handler = &ctx->ctrl_handler;
819 ctx->inst_no = MFC_NO_INSTANCE_SET;
820 /* Load firmware if this is the first instance */
821 if (dev->num_inst == 1) {
822 dev->watchdog_timer.expires = jiffies +
823 msecs_to_jiffies(MFC_WATCHDOG_INTERVAL);
824 add_timer(&dev->watchdog_timer);
825 ret = s5p_mfc_power_on();
827 mfc_err("power on failed\n");
831 ret = s5p_mfc_load_firmware(dev);
837 ret = s5p_mfc_init_hw(dev);
842 /* Init videobuf2 queue for CAPTURE */
844 q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
845 q->drv_priv = &ctx->fh;
846 q->lock = &dev->mfc_mutex;
847 if (vdev == dev->vfd_dec) {
848 q->io_modes = VB2_MMAP;
849 q->ops = get_dec_queue_ops();
850 } else if (vdev == dev->vfd_enc) {
851 q->io_modes = VB2_MMAP | VB2_USERPTR;
852 q->ops = get_enc_queue_ops();
858 * We'll do mostly sequential access, so sacrifice TLB efficiency for
861 q->dma_attrs = DMA_ATTR_ALLOC_SINGLE_PAGES;
862 q->mem_ops = &vb2_dma_contig_memops;
863 q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
864 ret = vb2_queue_init(q);
866 mfc_err("Failed to initialize videobuf2 queue(capture)\n");
869 /* Init videobuf2 queue for OUTPUT */
871 q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
872 q->drv_priv = &ctx->fh;
873 q->lock = &dev->mfc_mutex;
874 if (vdev == dev->vfd_dec) {
875 q->io_modes = VB2_MMAP;
876 q->ops = get_dec_queue_ops();
877 } else if (vdev == dev->vfd_enc) {
878 q->io_modes = VB2_MMAP | VB2_USERPTR;
879 q->ops = get_enc_queue_ops();
884 /* One way to indicate end-of-stream for MFC is to set the
885 * bytesused == 0. However by default videobuf2 handles bytesused
886 * equal to 0 as a special case and changes its value to the size
887 * of the buffer. Set the allow_zero_bytesused flag so that videobuf2
888 * will keep the value of bytesused intact.
890 q->allow_zero_bytesused = 1;
893 * We'll do mostly sequential access, so sacrifice TLB efficiency for
896 q->dma_attrs = DMA_ATTR_ALLOC_SINGLE_PAGES;
897 q->mem_ops = &vb2_dma_contig_memops;
898 q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
899 ret = vb2_queue_init(q);
901 mfc_err("Failed to initialize videobuf2 queue(output)\n");
904 mutex_unlock(&dev->mfc_mutex);
907 /* Deinit when failure occurred */
909 if (dev->num_inst == 1)
910 s5p_mfc_deinit_hw(dev);
914 if (dev->num_inst == 1) {
915 if (s5p_mfc_power_off() < 0)
916 mfc_err("power off failed\n");
917 del_timer_sync(&dev->watchdog_timer);
920 s5p_mfc_dec_ctrls_delete(ctx);
922 dev->ctx[ctx->num] = NULL;
924 v4l2_fh_del(&ctx->fh);
925 v4l2_fh_exit(&ctx->fh);
929 mutex_unlock(&dev->mfc_mutex);
934 /* Release MFC context */
935 static int s5p_mfc_release(struct file *file)
937 struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data);
938 struct s5p_mfc_dev *dev = ctx->dev;
940 /* if dev is null, do cleanup that doesn't need dev */
943 mutex_lock(&dev->mfc_mutex);
944 vb2_queue_release(&ctx->vq_src);
945 vb2_queue_release(&ctx->vq_dst);
949 /* Mark context as idle */
950 clear_work_bit_irqsave(ctx);
952 * If instance was initialised and not yet freed,
953 * return instance and free resources
955 if (ctx->state != MFCINST_FREE && ctx->state != MFCINST_INIT) {
956 mfc_debug(2, "Has to free instance\n");
957 s5p_mfc_close_mfc_inst(dev, ctx);
959 /* hardware locking scheme */
960 if (dev->curr_ctx == ctx->num)
961 clear_bit(0, &dev->hw_lock);
963 if (dev->num_inst == 0) {
964 mfc_debug(2, "Last instance\n");
965 s5p_mfc_deinit_hw(dev);
966 del_timer_sync(&dev->watchdog_timer);
968 if (s5p_mfc_power_off() < 0)
969 mfc_err("Power off failed\n");
971 mfc_debug(2, "Shutting down clock\n");
976 dev->ctx[ctx->num] = NULL;
977 s5p_mfc_dec_ctrls_delete(ctx);
978 v4l2_fh_del(&ctx->fh);
979 /* vdev is gone if dev is null */
981 v4l2_fh_exit(&ctx->fh);
985 mutex_unlock(&dev->mfc_mutex);
991 static __poll_t s5p_mfc_poll(struct file *file,
992 struct poll_table_struct *wait)
994 struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data);
995 struct s5p_mfc_dev *dev = ctx->dev;
996 struct vb2_queue *src_q, *dst_q;
997 struct vb2_buffer *src_vb = NULL, *dst_vb = NULL;
1001 mutex_lock(&dev->mfc_mutex);
1002 src_q = &ctx->vq_src;
1003 dst_q = &ctx->vq_dst;
1005 * There has to be at least one buffer queued on each queued_list, which
1006 * means either in driver already or waiting for driver to claim it
1007 * and start processing.
1009 if ((!src_q->streaming || list_empty(&src_q->queued_list))
1010 && (!dst_q->streaming || list_empty(&dst_q->queued_list))) {
1014 mutex_unlock(&dev->mfc_mutex);
1015 poll_wait(file, &ctx->fh.wait, wait);
1016 poll_wait(file, &src_q->done_wq, wait);
1017 poll_wait(file, &dst_q->done_wq, wait);
1018 mutex_lock(&dev->mfc_mutex);
1019 if (v4l2_event_pending(&ctx->fh))
1021 spin_lock_irqsave(&src_q->done_lock, flags);
1022 if (!list_empty(&src_q->done_list))
1023 src_vb = list_first_entry(&src_q->done_list, struct vb2_buffer,
1025 if (src_vb && (src_vb->state == VB2_BUF_STATE_DONE
1026 || src_vb->state == VB2_BUF_STATE_ERROR))
1027 rc |= EPOLLOUT | EPOLLWRNORM;
1028 spin_unlock_irqrestore(&src_q->done_lock, flags);
1029 spin_lock_irqsave(&dst_q->done_lock, flags);
1030 if (!list_empty(&dst_q->done_list))
1031 dst_vb = list_first_entry(&dst_q->done_list, struct vb2_buffer,
1033 if (dst_vb && (dst_vb->state == VB2_BUF_STATE_DONE
1034 || dst_vb->state == VB2_BUF_STATE_ERROR))
1035 rc |= EPOLLIN | EPOLLRDNORM;
1036 spin_unlock_irqrestore(&dst_q->done_lock, flags);
1038 mutex_unlock(&dev->mfc_mutex);
1043 static int s5p_mfc_mmap(struct file *file, struct vm_area_struct *vma)
1045 struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data);
1046 unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
1049 if (offset < DST_QUEUE_OFF_BASE) {
1050 mfc_debug(2, "mmaping source\n");
1051 ret = vb2_mmap(&ctx->vq_src, vma);
1052 } else { /* capture */
1053 mfc_debug(2, "mmaping destination\n");
1054 vma->vm_pgoff -= (DST_QUEUE_OFF_BASE >> PAGE_SHIFT);
1055 ret = vb2_mmap(&ctx->vq_dst, vma);
1061 static const struct v4l2_file_operations s5p_mfc_fops = {
1062 .owner = THIS_MODULE,
1063 .open = s5p_mfc_open,
1064 .release = s5p_mfc_release,
1065 .poll = s5p_mfc_poll,
1066 .unlocked_ioctl = video_ioctl2,
1067 .mmap = s5p_mfc_mmap,
1070 /* DMA memory related helper functions */
1071 static void s5p_mfc_memdev_release(struct device *dev)
1073 of_reserved_mem_device_release(dev);
1076 static struct device *s5p_mfc_alloc_memdev(struct device *dev,
1077 const char *name, unsigned int idx)
1079 struct device *child;
1082 child = devm_kzalloc(dev, sizeof(*child), GFP_KERNEL);
1086 device_initialize(child);
1087 dev_set_name(child, "%s:%s", dev_name(dev), name);
1088 child->parent = dev;
1089 child->coherent_dma_mask = dev->coherent_dma_mask;
1090 child->dma_mask = dev->dma_mask;
1091 child->release = s5p_mfc_memdev_release;
1092 child->dma_parms = devm_kzalloc(dev, sizeof(*child->dma_parms),
1094 if (!child->dma_parms)
1098 * The memdevs are not proper OF platform devices, so in order for them
1099 * to be treated as valid DMA masters we need a bit of a hack to force
1100 * them to inherit the MFC node's DMA configuration.
1102 of_dma_configure(child, dev->of_node, true);
1104 if (device_add(child) == 0) {
1105 ret = of_reserved_mem_device_init_by_idx(child, dev->of_node,
1116 static int s5p_mfc_configure_2port_memory(struct s5p_mfc_dev *mfc_dev)
1118 struct device *dev = &mfc_dev->plat_dev->dev;
1120 dma_addr_t bank2_dma_addr;
1121 unsigned long align_size = 1 << MFC_BASE_ALIGN_ORDER;
1125 * Create and initialize virtual devices for accessing
1126 * reserved memory regions.
1128 mfc_dev->mem_dev[BANK_L_CTX] = s5p_mfc_alloc_memdev(dev, "left",
1130 if (!mfc_dev->mem_dev[BANK_L_CTX])
1132 mfc_dev->mem_dev[BANK_R_CTX] = s5p_mfc_alloc_memdev(dev, "right",
1134 if (!mfc_dev->mem_dev[BANK_R_CTX]) {
1135 device_unregister(mfc_dev->mem_dev[BANK_L_CTX]);
1139 /* Allocate memory for firmware and initialize both banks addresses */
1140 ret = s5p_mfc_alloc_firmware(mfc_dev);
1142 device_unregister(mfc_dev->mem_dev[BANK_R_CTX]);
1143 device_unregister(mfc_dev->mem_dev[BANK_L_CTX]);
1147 mfc_dev->dma_base[BANK_L_CTX] = mfc_dev->fw_buf.dma;
1149 bank2_virt = dma_alloc_coherent(mfc_dev->mem_dev[BANK_R_CTX],
1150 align_size, &bank2_dma_addr, GFP_KERNEL);
1152 mfc_err("Allocating bank2 base failed\n");
1153 s5p_mfc_release_firmware(mfc_dev);
1154 device_unregister(mfc_dev->mem_dev[BANK_R_CTX]);
1155 device_unregister(mfc_dev->mem_dev[BANK_L_CTX]);
1159 /* Valid buffers passed to MFC encoder with LAST_FRAME command
1160 * should not have address of bank2 - MFC will treat it as a null frame.
1161 * To avoid such situation we set bank2 address below the pool address.
1163 mfc_dev->dma_base[BANK_R_CTX] = bank2_dma_addr - align_size;
1165 dma_free_coherent(mfc_dev->mem_dev[BANK_R_CTX], align_size, bank2_virt,
1168 vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK_L_CTX],
1170 vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK_R_CTX],
1176 static void s5p_mfc_unconfigure_2port_memory(struct s5p_mfc_dev *mfc_dev)
1178 device_unregister(mfc_dev->mem_dev[BANK_L_CTX]);
1179 device_unregister(mfc_dev->mem_dev[BANK_R_CTX]);
1180 vb2_dma_contig_clear_max_seg_size(mfc_dev->mem_dev[BANK_L_CTX]);
1181 vb2_dma_contig_clear_max_seg_size(mfc_dev->mem_dev[BANK_R_CTX]);
1184 static int s5p_mfc_configure_common_memory(struct s5p_mfc_dev *mfc_dev)
1186 struct device *dev = &mfc_dev->plat_dev->dev;
1187 unsigned long mem_size = SZ_4M;
1188 unsigned int bitmap_size;
1190 if (IS_ENABLED(CONFIG_DMA_CMA) || exynos_is_iommu_available(dev))
1194 mem_size = memparse(mfc_mem_size, NULL);
1196 bitmap_size = BITS_TO_LONGS(mem_size >> PAGE_SHIFT) * sizeof(long);
1198 mfc_dev->mem_bitmap = kzalloc(bitmap_size, GFP_KERNEL);
1199 if (!mfc_dev->mem_bitmap)
1202 mfc_dev->mem_virt = dma_alloc_coherent(dev, mem_size,
1203 &mfc_dev->mem_base, GFP_KERNEL);
1204 if (!mfc_dev->mem_virt) {
1205 kfree(mfc_dev->mem_bitmap);
1206 dev_err(dev, "failed to preallocate %ld MiB for the firmware and context buffers\n",
1207 (mem_size / SZ_1M));
1210 mfc_dev->mem_size = mem_size;
1211 mfc_dev->dma_base[BANK_L_CTX] = mfc_dev->mem_base;
1212 mfc_dev->dma_base[BANK_R_CTX] = mfc_dev->mem_base;
1215 * MFC hardware cannot handle 0 as a base address, so mark first 128K
1216 * as used (to keep required base alignment) and adjust base address
1218 if (mfc_dev->mem_base == (dma_addr_t)0) {
1219 unsigned int offset = 1 << MFC_BASE_ALIGN_ORDER;
1221 bitmap_set(mfc_dev->mem_bitmap, 0, offset >> PAGE_SHIFT);
1222 mfc_dev->dma_base[BANK_L_CTX] += offset;
1223 mfc_dev->dma_base[BANK_R_CTX] += offset;
1226 /* Firmware allocation cannot fail in this case */
1227 s5p_mfc_alloc_firmware(mfc_dev);
1229 mfc_dev->mem_dev[BANK_L_CTX] = mfc_dev->mem_dev[BANK_R_CTX] = dev;
1230 vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
1232 dev_info(dev, "preallocated %ld MiB buffer for the firmware and context buffers\n",
1233 (mem_size / SZ_1M));
1238 static void s5p_mfc_unconfigure_common_memory(struct s5p_mfc_dev *mfc_dev)
1240 struct device *dev = &mfc_dev->plat_dev->dev;
1242 dma_free_coherent(dev, mfc_dev->mem_size, mfc_dev->mem_virt,
1244 kfree(mfc_dev->mem_bitmap);
1245 vb2_dma_contig_clear_max_seg_size(dev);
1248 static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
1250 struct device *dev = &mfc_dev->plat_dev->dev;
1252 if (exynos_is_iommu_available(dev) || !IS_TWOPORT(mfc_dev))
1253 return s5p_mfc_configure_common_memory(mfc_dev);
1255 return s5p_mfc_configure_2port_memory(mfc_dev);
1258 static void s5p_mfc_unconfigure_dma_memory(struct s5p_mfc_dev *mfc_dev)
1260 struct device *dev = &mfc_dev->plat_dev->dev;
1262 s5p_mfc_release_firmware(mfc_dev);
1263 if (exynos_is_iommu_available(dev) || !IS_TWOPORT(mfc_dev))
1264 s5p_mfc_unconfigure_common_memory(mfc_dev);
1266 s5p_mfc_unconfigure_2port_memory(mfc_dev);
1269 /* MFC probe function */
1270 static int s5p_mfc_probe(struct platform_device *pdev)
1272 struct s5p_mfc_dev *dev;
1273 struct video_device *vfd;
1274 struct resource *res;
1277 pr_debug("%s++\n", __func__);
1278 dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
1282 spin_lock_init(&dev->irqlock);
1283 spin_lock_init(&dev->condlock);
1284 dev->plat_dev = pdev;
1285 if (!dev->plat_dev) {
1286 mfc_err("No platform data specified\n");
1290 dev->variant = of_device_get_match_data(&pdev->dev);
1291 if (!dev->variant) {
1292 dev_err(&pdev->dev, "Failed to get device MFC hardware variant information\n");
1296 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1297 dev->regs_base = devm_ioremap_resource(&pdev->dev, res);
1298 if (IS_ERR(dev->regs_base))
1299 return PTR_ERR(dev->regs_base);
1301 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1303 dev_err(&pdev->dev, "failed to get irq resource\n");
1306 dev->irq = res->start;
1307 ret = devm_request_irq(&pdev->dev, dev->irq, s5p_mfc_irq,
1308 0, pdev->name, dev);
1310 dev_err(&pdev->dev, "Failed to install irq (%d)\n", ret);
1314 ret = s5p_mfc_configure_dma_memory(dev);
1316 dev_err(&pdev->dev, "failed to configure DMA memory\n");
1320 ret = s5p_mfc_init_pm(dev);
1322 dev_err(&pdev->dev, "failed to get mfc clock source\n");
1327 * Load fails if fs isn't mounted. Try loading anyway.
1328 * _open() will load it, it it fails now. Ignore failure.
1330 s5p_mfc_load_firmware(dev);
1332 mutex_init(&dev->mfc_mutex);
1333 init_waitqueue_head(&dev->queue);
1335 INIT_WORK(&dev->watchdog_work, s5p_mfc_watchdog_worker);
1336 atomic_set(&dev->watchdog_cnt, 0);
1337 timer_setup(&dev->watchdog_timer, s5p_mfc_watchdog, 0);
1339 ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
1341 goto err_v4l2_dev_reg;
1344 vfd = video_device_alloc();
1346 v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n");
1350 vfd->fops = &s5p_mfc_fops;
1351 vfd->ioctl_ops = get_dec_v4l2_ioctl_ops();
1352 vfd->release = video_device_release;
1353 vfd->lock = &dev->mfc_mutex;
1354 vfd->v4l2_dev = &dev->v4l2_dev;
1355 vfd->vfl_dir = VFL_DIR_M2M;
1356 vfd->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING;
1357 set_bit(V4L2_FL_QUIRK_INVERTED_CROP, &vfd->flags);
1358 snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_DEC_NAME);
1360 video_set_drvdata(vfd, dev);
1363 vfd = video_device_alloc();
1365 v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n");
1369 vfd->fops = &s5p_mfc_fops;
1370 vfd->ioctl_ops = get_enc_v4l2_ioctl_ops();
1371 vfd->release = video_device_release;
1372 vfd->lock = &dev->mfc_mutex;
1373 vfd->v4l2_dev = &dev->v4l2_dev;
1374 vfd->vfl_dir = VFL_DIR_M2M;
1375 vfd->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING;
1376 snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_ENC_NAME);
1378 video_set_drvdata(vfd, dev);
1379 platform_set_drvdata(pdev, dev);
1381 /* Initialize HW ops and commands based on MFC version */
1382 s5p_mfc_init_hw_ops(dev);
1383 s5p_mfc_init_hw_cmds(dev);
1384 s5p_mfc_init_regs(dev);
1386 /* Register decoder and encoder */
1387 ret = video_register_device(dev->vfd_dec, VFL_TYPE_VIDEO, 0);
1389 v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
1392 v4l2_info(&dev->v4l2_dev,
1393 "decoder registered as /dev/video%d\n", dev->vfd_dec->num);
1395 ret = video_register_device(dev->vfd_enc, VFL_TYPE_VIDEO, 0);
1397 v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
1400 v4l2_info(&dev->v4l2_dev,
1401 "encoder registered as /dev/video%d\n", dev->vfd_enc->num);
1403 pr_debug("%s--\n", __func__);
1406 /* Deinit MFC if probe had failed */
1408 video_unregister_device(dev->vfd_dec);
1410 video_device_release(dev->vfd_enc);
1412 video_device_release(dev->vfd_dec);
1414 v4l2_device_unregister(&dev->v4l2_dev);
1416 s5p_mfc_final_pm(dev);
1418 s5p_mfc_unconfigure_dma_memory(dev);
1420 pr_debug("%s-- with error\n", __func__);
1425 /* Remove the driver */
1426 static int s5p_mfc_remove(struct platform_device *pdev)
1428 struct s5p_mfc_dev *dev = platform_get_drvdata(pdev);
1429 struct s5p_mfc_ctx *ctx;
1432 v4l2_info(&dev->v4l2_dev, "Removing %s\n", pdev->name);
1435 * Clear ctx dev pointer to avoid races between s5p_mfc_remove()
1436 * and s5p_mfc_release() and s5p_mfc_release() accessing ctx->dev
1437 * after s5p_mfc_remove() is run during unbind.
1439 mutex_lock(&dev->mfc_mutex);
1440 for (i = 0; i < MFC_NUM_CONTEXTS; i++) {
1444 /* clear ctx->dev */
1447 mutex_unlock(&dev->mfc_mutex);
1449 del_timer_sync(&dev->watchdog_timer);
1450 flush_work(&dev->watchdog_work);
1452 video_unregister_device(dev->vfd_enc);
1453 video_unregister_device(dev->vfd_dec);
1454 video_device_release(dev->vfd_enc);
1455 video_device_release(dev->vfd_dec);
1456 v4l2_device_unregister(&dev->v4l2_dev);
1457 s5p_mfc_unconfigure_dma_memory(dev);
1459 s5p_mfc_final_pm(dev);
1463 #ifdef CONFIG_PM_SLEEP
1465 static int s5p_mfc_suspend(struct device *dev)
1467 struct s5p_mfc_dev *m_dev = dev_get_drvdata(dev);
1470 if (m_dev->num_inst == 0)
1473 if (test_and_set_bit(0, &m_dev->enter_suspend) != 0) {
1474 mfc_err("Error: going to suspend for a second time\n");
1478 /* Check if we're processing then wait if it necessary. */
1479 while (test_and_set_bit(0, &m_dev->hw_lock) != 0) {
1480 /* Try and lock the HW */
1481 /* Wait on the interrupt waitqueue */
1482 ret = wait_event_interruptible_timeout(m_dev->queue,
1483 m_dev->int_cond, msecs_to_jiffies(MFC_INT_TIMEOUT));
1485 mfc_err("Waiting for hardware to finish timed out\n");
1486 clear_bit(0, &m_dev->enter_suspend);
1491 ret = s5p_mfc_sleep(m_dev);
1493 clear_bit(0, &m_dev->enter_suspend);
1494 clear_bit(0, &m_dev->hw_lock);
1499 static int s5p_mfc_resume(struct device *dev)
1501 struct s5p_mfc_dev *m_dev = dev_get_drvdata(dev);
1503 if (m_dev->num_inst == 0)
1505 return s5p_mfc_wakeup(m_dev);
1509 /* Power management */
1510 static const struct dev_pm_ops s5p_mfc_pm_ops = {
1511 SET_SYSTEM_SLEEP_PM_OPS(s5p_mfc_suspend, s5p_mfc_resume)
1514 static struct s5p_mfc_buf_size_v5 mfc_buf_size_v5 = {
1515 .h264_ctx = MFC_H264_CTX_BUF_SIZE,
1516 .non_h264_ctx = MFC_CTX_BUF_SIZE,
1517 .dsc = DESC_BUF_SIZE,
1518 .shm = SHARED_BUF_SIZE,
1521 static struct s5p_mfc_buf_size buf_size_v5 = {
1523 .cpb = MAX_CPB_SIZE,
1524 .priv = &mfc_buf_size_v5,
1527 static struct s5p_mfc_variant mfc_drvdata_v5 = {
1528 .version = MFC_VERSION,
1529 .version_bit = MFC_V5_BIT,
1530 .port_num = MFC_NUM_PORTS,
1531 .buf_size = &buf_size_v5,
1532 .fw_name[0] = "/*(DEBLOBBED)*/",
1533 .clk_names = {"mfc", "sclk_mfc"},
1535 .use_clock_gating = true,
1538 static struct s5p_mfc_buf_size_v6 mfc_buf_size_v6 = {
1539 .dev_ctx = MFC_CTX_BUF_SIZE_V6,
1540 .h264_dec_ctx = MFC_H264_DEC_CTX_BUF_SIZE_V6,
1541 .other_dec_ctx = MFC_OTHER_DEC_CTX_BUF_SIZE_V6,
1542 .h264_enc_ctx = MFC_H264_ENC_CTX_BUF_SIZE_V6,
1543 .other_enc_ctx = MFC_OTHER_ENC_CTX_BUF_SIZE_V6,
1546 static struct s5p_mfc_buf_size buf_size_v6 = {
1547 .fw = MAX_FW_SIZE_V6,
1548 .cpb = MAX_CPB_SIZE_V6,
1549 .priv = &mfc_buf_size_v6,
1552 static struct s5p_mfc_variant mfc_drvdata_v6 = {
1553 .version = MFC_VERSION_V6,
1554 .version_bit = MFC_V6_BIT,
1555 .port_num = MFC_NUM_PORTS_V6,
1556 .buf_size = &buf_size_v6,
1557 .fw_name[0] = "/*(DEBLOBBED)*/",
1559 * v6-v2 firmware contains bug fixes and interface change
1560 * for init buffer command
1562 .fw_name[1] = "/*(DEBLOBBED)*/",
1563 .clk_names = {"mfc"},
1567 static struct s5p_mfc_buf_size_v6 mfc_buf_size_v7 = {
1568 .dev_ctx = MFC_CTX_BUF_SIZE_V7,
1569 .h264_dec_ctx = MFC_H264_DEC_CTX_BUF_SIZE_V7,
1570 .other_dec_ctx = MFC_OTHER_DEC_CTX_BUF_SIZE_V7,
1571 .h264_enc_ctx = MFC_H264_ENC_CTX_BUF_SIZE_V7,
1572 .other_enc_ctx = MFC_OTHER_ENC_CTX_BUF_SIZE_V7,
1575 static struct s5p_mfc_buf_size buf_size_v7 = {
1576 .fw = MAX_FW_SIZE_V7,
1577 .cpb = MAX_CPB_SIZE_V7,
1578 .priv = &mfc_buf_size_v7,
1581 static struct s5p_mfc_variant mfc_drvdata_v7 = {
1582 .version = MFC_VERSION_V7,
1583 .version_bit = MFC_V7_BIT,
1584 .port_num = MFC_NUM_PORTS_V7,
1585 .buf_size = &buf_size_v7,
1586 .fw_name[0] = "/*(DEBLOBBED)*/",
1587 .clk_names = {"mfc"},
1591 static struct s5p_mfc_variant mfc_drvdata_v7_3250 = {
1592 .version = MFC_VERSION_V7,
1593 .version_bit = MFC_V7_BIT,
1594 .port_num = MFC_NUM_PORTS_V7,
1595 .buf_size = &buf_size_v7,
1596 .fw_name[0] = "/*(DEBLOBBED)*/",
1597 .clk_names = {"mfc", "sclk_mfc"},
1601 static struct s5p_mfc_buf_size_v6 mfc_buf_size_v8 = {
1602 .dev_ctx = MFC_CTX_BUF_SIZE_V8,
1603 .h264_dec_ctx = MFC_H264_DEC_CTX_BUF_SIZE_V8,
1604 .other_dec_ctx = MFC_OTHER_DEC_CTX_BUF_SIZE_V8,
1605 .h264_enc_ctx = MFC_H264_ENC_CTX_BUF_SIZE_V8,
1606 .other_enc_ctx = MFC_OTHER_ENC_CTX_BUF_SIZE_V8,
1609 static struct s5p_mfc_buf_size buf_size_v8 = {
1610 .fw = MAX_FW_SIZE_V8,
1611 .cpb = MAX_CPB_SIZE_V8,
1612 .priv = &mfc_buf_size_v8,
1615 static struct s5p_mfc_variant mfc_drvdata_v8 = {
1616 .version = MFC_VERSION_V8,
1617 .version_bit = MFC_V8_BIT,
1618 .port_num = MFC_NUM_PORTS_V8,
1619 .buf_size = &buf_size_v8,
1620 .fw_name[0] = "/*(DEBLOBBED)*/",
1621 .clk_names = {"mfc"},
1625 static struct s5p_mfc_variant mfc_drvdata_v8_5433 = {
1626 .version = MFC_VERSION_V8,
1627 .version_bit = MFC_V8_BIT,
1628 .port_num = MFC_NUM_PORTS_V8,
1629 .buf_size = &buf_size_v8,
1630 .fw_name[0] = "/*(DEBLOBBED)*/",
1631 .clk_names = {"pclk", "aclk", "aclk_xiu"},
1635 static struct s5p_mfc_buf_size_v6 mfc_buf_size_v10 = {
1636 .dev_ctx = MFC_CTX_BUF_SIZE_V10,
1637 .h264_dec_ctx = MFC_H264_DEC_CTX_BUF_SIZE_V10,
1638 .other_dec_ctx = MFC_OTHER_DEC_CTX_BUF_SIZE_V10,
1639 .h264_enc_ctx = MFC_H264_ENC_CTX_BUF_SIZE_V10,
1640 .hevc_enc_ctx = MFC_HEVC_ENC_CTX_BUF_SIZE_V10,
1641 .other_enc_ctx = MFC_OTHER_ENC_CTX_BUF_SIZE_V10,
1644 static struct s5p_mfc_buf_size buf_size_v10 = {
1645 .fw = MAX_FW_SIZE_V10,
1646 .cpb = MAX_CPB_SIZE_V10,
1647 .priv = &mfc_buf_size_v10,
1650 static struct s5p_mfc_variant mfc_drvdata_v10 = {
1651 .version = MFC_VERSION_V10,
1652 .version_bit = MFC_V10_BIT,
1653 .port_num = MFC_NUM_PORTS_V10,
1654 .buf_size = &buf_size_v10,
1655 .fw_name[0] = "/*(DEBLOBBED)*/",
1658 static const struct of_device_id exynos_mfc_match[] = {
1660 .compatible = "samsung,mfc-v5",
1661 .data = &mfc_drvdata_v5,
1663 .compatible = "samsung,mfc-v6",
1664 .data = &mfc_drvdata_v6,
1666 .compatible = "samsung,mfc-v7",
1667 .data = &mfc_drvdata_v7,
1669 .compatible = "samsung,exynos3250-mfc",
1670 .data = &mfc_drvdata_v7_3250,
1672 .compatible = "samsung,mfc-v8",
1673 .data = &mfc_drvdata_v8,
1675 .compatible = "samsung,exynos5433-mfc",
1676 .data = &mfc_drvdata_v8_5433,
1678 .compatible = "samsung,mfc-v10",
1679 .data = &mfc_drvdata_v10,
1683 MODULE_DEVICE_TABLE(of, exynos_mfc_match);
1685 static struct platform_driver s5p_mfc_driver = {
1686 .probe = s5p_mfc_probe,
1687 .remove = s5p_mfc_remove,
1689 .name = S5P_MFC_NAME,
1690 .pm = &s5p_mfc_pm_ops,
1691 .of_match_table = exynos_mfc_match,
1695 module_platform_driver(s5p_mfc_driver);
1697 MODULE_LICENSE("GPL");
1698 MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
1699 MODULE_DESCRIPTION("Samsung S5P Multi Format Codec V4L2 driver");