1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * tw68 functions to handle video data
5 * Much of this code is derived from the cx88 and sa7134 drivers, which
6 * were in turn derived from the bt87x driver. The original work was by
7 * Gerd Knorr; more recently the code was enhanced by Mauro Carvalho Chehab,
8 * Hans Verkuil, Andy Walls and many others. Their work is gratefully
9 * acknowledged. Full credit goes to them - any problems within this code
12 * Copyright (C) 2009 William M. Brack
14 * Refactored and updated to the latest v4l core frameworks:
16 * Copyright (C) 2014 Hans Verkuil <hverkuil@xs4all.nl>
19 #include <linux/module.h>
20 #include <media/v4l2-common.h>
21 #include <media/v4l2-event.h>
22 #include <media/videobuf2-dma-sg.h>
27 /* ------------------------------------------------------------------ */
28 /* data structs for video */
31 * Note that the saa7134 has formats, e.g. YUV420, which are classified
32 * as "planar". These affect overlay mode, and are flagged with a field
33 * ".planar" in the format. Do we need to implement this in this driver?
35 static const struct tw68_format formats[] = {
37 .fourcc = V4L2_PIX_FMT_RGB555,
39 .twformat = ColorFormatRGB15,
41 .fourcc = V4L2_PIX_FMT_RGB555X,
43 .twformat = ColorFormatRGB15 | ColorFormatBSWAP,
45 .fourcc = V4L2_PIX_FMT_RGB565,
47 .twformat = ColorFormatRGB16,
49 .fourcc = V4L2_PIX_FMT_RGB565X,
51 .twformat = ColorFormatRGB16 | ColorFormatBSWAP,
53 .fourcc = V4L2_PIX_FMT_BGR24,
55 .twformat = ColorFormatRGB24,
57 .fourcc = V4L2_PIX_FMT_RGB24,
59 .twformat = ColorFormatRGB24 | ColorFormatBSWAP,
61 .fourcc = V4L2_PIX_FMT_BGR32,
63 .twformat = ColorFormatRGB32,
65 .fourcc = V4L2_PIX_FMT_RGB32,
67 .twformat = ColorFormatRGB32 | ColorFormatBSWAP |
70 .fourcc = V4L2_PIX_FMT_YUYV,
72 .twformat = ColorFormatYUY2,
74 .fourcc = V4L2_PIX_FMT_UYVY,
76 .twformat = ColorFormatYUY2 | ColorFormatBSWAP,
79 #define FORMATS ARRAY_SIZE(formats)
89 .video_v_start = 24, \
90 .video_v_stop = 311, \
99 .vbi_v_start_0 = 10, \
100 .vbi_v_stop_0 = 21, \
101 .video_v_start = 22, \
102 .video_v_stop = 262, \
106 * The following table is searched by tw68_s_std, first for a specific
107 * match, then for an entry which contains the desired id. The table
108 * entries should therefore be ordered in ascending order of specificity.
110 static const struct tw68_tvnorm tvnorms[] = {
112 .name = "PAL", /* autodetect */
116 .sync_control = 0x18,
117 .luma_control = 0x40,
118 .chroma_ctrl1 = 0x81,
120 .chroma_ctrl2 = 0x06,
122 .format = VideoFormatPALBDGHI,
128 .sync_control = 0x59,
129 .luma_control = 0x40,
130 .chroma_ctrl1 = 0x89,
132 .chroma_ctrl2 = 0x0e,
134 .format = VideoFormatNTSC,
137 .id = V4L2_STD_SECAM,
140 .sync_control = 0x18,
141 .luma_control = 0x1b,
142 .chroma_ctrl1 = 0xd1,
144 .chroma_ctrl2 = 0x00,
146 .format = VideoFormatSECAM,
149 .id = V4L2_STD_PAL_M,
152 .sync_control = 0x59,
153 .luma_control = 0x40,
154 .chroma_ctrl1 = 0xb9,
156 .chroma_ctrl2 = 0x0e,
158 .format = VideoFormatPALM,
161 .id = V4L2_STD_PAL_Nc,
164 .sync_control = 0x18,
165 .luma_control = 0x40,
166 .chroma_ctrl1 = 0xa1,
168 .chroma_ctrl2 = 0x06,
170 .format = VideoFormatPALNC,
173 .id = V4L2_STD_PAL_60,
182 .vbi_v_start_1 = 273,
184 .sync_control = 0x18,
185 .luma_control = 0x40,
186 .chroma_ctrl1 = 0x81,
188 .chroma_ctrl2 = 0x06,
190 .format = VideoFormatPAL60,
193 #define TVNORMS ARRAY_SIZE(tvnorms)
195 static const struct tw68_format *format_by_fourcc(unsigned int fourcc)
199 for (i = 0; i < FORMATS; i++)
200 if (formats[i].fourcc == fourcc)
206 /* ------------------------------------------------------------------ */
208 * Note that the cropping rectangles are described in terms of a single
209 * frame, i.e. line positions are only 1/2 the interlaced equivalent
211 static void set_tvnorm(struct tw68_dev *dev, const struct tw68_tvnorm *norm)
213 if (norm != dev->tvnorm) {
215 dev->height = (norm->id & V4L2_STD_525_60) ? 480 : 576;
217 tw68_set_tvnorm_hw(dev);
224 * Scaling and Cropping for video decoding
226 * We are working with 3 values for horizontal and vertical - scale,
229 * HACTIVE represent the actual number of pixels in the "usable" image,
230 * before scaling. HDELAY represents the number of pixels skipped
231 * between the start of the horizontal sync and the start of the image.
232 * HSCALE is calculated using the formula
233 * HSCALE = (HACTIVE / (#pixels desired)) * 256
235 * The vertical registers are similar, except based upon the total number
236 * of lines in the image, and the first line of the image (i.e. ignoring
237 * vertical sync and VBI).
239 * Note that the number of bytes reaching the FIFO (and hence needing
240 * to be processed by the DMAP program) is completely dependent upon
241 * these values, especially HSCALE.
244 * @dev pointer to the device structure, needed for
245 * getting current norm (as well as debug print)
246 * @width actual image width (from user buffer)
247 * @height actual image height
248 * @field indicates Top, Bottom or Interlaced
250 static int tw68_set_scale(struct tw68_dev *dev, unsigned int width,
251 unsigned int height, enum v4l2_field field)
253 const struct tw68_tvnorm *norm = dev->tvnorm;
254 /* set individually for debugging clarity */
255 int hactive, hdelay, hscale;
256 int vactive, vdelay, vscale;
259 if (V4L2_FIELD_HAS_BOTH(field)) /* if field is interlaced */
260 height /= 2; /* we must set for 1-frame */
262 pr_debug("%s: width=%d, height=%d, both=%d\n"
263 " tvnorm h_delay=%d, h_start=%d, h_stop=%d, v_delay=%d, v_start=%d, v_stop=%d\n",
264 __func__, width, height, V4L2_FIELD_HAS_BOTH(field),
265 norm->h_delay, norm->h_start, norm->h_stop,
266 norm->v_delay, norm->video_v_start,
269 switch (dev->vdecoder) {
271 hdelay = norm->h_delay0;
274 hdelay = norm->h_delay;
278 hdelay += norm->h_start;
279 hactive = norm->h_stop - norm->h_start + 1;
281 hscale = (hactive * 256) / (width);
283 vdelay = norm->v_delay;
284 vactive = ((norm->id & V4L2_STD_525_60) ? 524 : 624) / 2 - norm->video_v_start;
285 vscale = (vactive * 256) / height;
287 pr_debug("%s: %dx%d [%s%s,%s]\n", __func__,
289 V4L2_FIELD_HAS_TOP(field) ? "T" : "",
290 V4L2_FIELD_HAS_BOTTOM(field) ? "B" : "",
291 v4l2_norm_to_name(dev->tvnorm->id));
292 pr_debug("%s: hactive=%d, hdelay=%d, hscale=%d; vactive=%d, vdelay=%d, vscale=%d\n",
294 hactive, hdelay, hscale, vactive, vdelay, vscale);
296 comb = ((vdelay & 0x300) >> 2) |
297 ((vactive & 0x300) >> 4) |
298 ((hdelay & 0x300) >> 6) |
299 ((hactive & 0x300) >> 8);
300 pr_debug("%s: setting CROP_HI=%02x, VDELAY_LO=%02x, VACTIVE_LO=%02x, HDELAY_LO=%02x, HACTIVE_LO=%02x\n",
301 __func__, comb, vdelay, vactive, hdelay, hactive);
302 tw_writeb(TW68_CROP_HI, comb);
303 tw_writeb(TW68_VDELAY_LO, vdelay & 0xff);
304 tw_writeb(TW68_VACTIVE_LO, vactive & 0xff);
305 tw_writeb(TW68_HDELAY_LO, hdelay & 0xff);
306 tw_writeb(TW68_HACTIVE_LO, hactive & 0xff);
308 comb = ((vscale & 0xf00) >> 4) | ((hscale & 0xf00) >> 8);
309 pr_debug("%s: setting SCALE_HI=%02x, VSCALE_LO=%02x, HSCALE_LO=%02x\n",
310 __func__, comb, vscale, hscale);
311 tw_writeb(TW68_SCALE_HI, comb);
312 tw_writeb(TW68_VSCALE_LO, vscale);
313 tw_writeb(TW68_HSCALE_LO, hscale);
318 /* ------------------------------------------------------------------ */
320 int tw68_video_start_dma(struct tw68_dev *dev, struct tw68_buf *buf)
322 /* Set cropping and scaling */
323 tw68_set_scale(dev, dev->width, dev->height, dev->field);
325 * Set start address for RISC program. Note that if the DMAP
326 * processor is currently running, it must be stopped before
327 * a new address can be set.
329 tw_clearl(TW68_DMAC, TW68_DMAP_EN);
330 tw_writel(TW68_DMAP_SA, buf->dma);
331 /* Clear any pending interrupts */
332 tw_writel(TW68_INTSTAT, dev->board_virqmask);
333 /* Enable the risc engine and the fifo */
334 tw_andorl(TW68_DMAC, 0xff, dev->fmt->twformat |
335 ColorFormatGamma | TW68_DMAP_EN | TW68_FIFO_EN);
336 dev->pci_irqmask |= dev->board_virqmask;
337 tw_setl(TW68_INTMASK, dev->pci_irqmask);
341 /* ------------------------------------------------------------------ */
343 /* calc max # of buffers from size (must not exceed the 4MB virtual
344 * address space per DMA channel) */
345 static int tw68_buffer_count(unsigned int size, unsigned int count)
347 unsigned int maxcount;
349 maxcount = (4 * 1024 * 1024) / roundup(size, PAGE_SIZE);
350 if (count > maxcount)
355 /* ------------------------------------------------------------- */
356 /* vb2 queue operations */
358 static int tw68_queue_setup(struct vb2_queue *q,
359 unsigned int *num_buffers, unsigned int *num_planes,
360 unsigned int sizes[], struct device *alloc_devs[])
362 struct tw68_dev *dev = vb2_get_drv_priv(q);
363 unsigned tot_bufs = q->num_buffers + *num_buffers;
364 unsigned size = (dev->fmt->depth * dev->width * dev->height) >> 3;
368 tot_bufs = tw68_buffer_count(size, tot_bufs);
369 *num_buffers = tot_bufs - q->num_buffers;
371 * We allow create_bufs, but only if the sizeimage is >= as the
372 * current sizeimage. The tw68_buffer_count calculation becomes quite
373 * difficult otherwise.
376 return sizes[0] < size ? -EINVAL : 0;
384 * The risc program for each buffers works as follows: it starts with a simple
385 * 'JUMP to addr + 8', which is effectively a NOP. Then the program to DMA the
386 * buffer follows and at the end we have a JUMP back to the start + 8 (skipping
389 * This is the program of the first buffer to be queued if the active list is
390 * empty and it just keeps DMAing this buffer without generating any interrupts.
392 * If a new buffer is added then the initial JUMP in the program generates an
393 * interrupt as well which signals that the previous buffer has been DMAed
394 * successfully and that it can be returned to userspace.
396 * It also sets the final jump of the previous buffer to the start of the new
397 * buffer, thus chaining the new buffer into the DMA chain. This is a single
398 * atomic u32 write, so there is no race condition.
400 * The end-result of all this that you only get an interrupt when a buffer
401 * is ready, so the control flow is very easy.
403 static void tw68_buf_queue(struct vb2_buffer *vb)
405 struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
406 struct vb2_queue *vq = vb->vb2_queue;
407 struct tw68_dev *dev = vb2_get_drv_priv(vq);
408 struct tw68_buf *buf = container_of(vbuf, struct tw68_buf, vb);
409 struct tw68_buf *prev;
412 spin_lock_irqsave(&dev->slock, flags);
414 /* append a 'JUMP to start of buffer' to the buffer risc program */
415 buf->jmp[0] = cpu_to_le32(RISC_JUMP);
416 buf->jmp[1] = cpu_to_le32(buf->dma + 8);
418 if (!list_empty(&dev->active)) {
419 prev = list_entry(dev->active.prev, struct tw68_buf, list);
420 buf->cpu[0] |= cpu_to_le32(RISC_INT_BIT);
421 prev->jmp[1] = cpu_to_le32(buf->dma);
423 list_add_tail(&buf->list, &dev->active);
424 spin_unlock_irqrestore(&dev->slock, flags);
430 * Set the ancillary information into the buffer structure. This
431 * includes generating the necessary risc program if it hasn't already
432 * been done for the current buffer format.
433 * The structure fh contains the details of the format requested by the
434 * user - type, width, height and #fields. This is compared with the
435 * last format set for the current buffer. If they differ, the risc
436 * code (which controls the filling of the buffer) is (re-)generated.
438 static int tw68_buf_prepare(struct vb2_buffer *vb)
440 struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
441 struct vb2_queue *vq = vb->vb2_queue;
442 struct tw68_dev *dev = vb2_get_drv_priv(vq);
443 struct tw68_buf *buf = container_of(vbuf, struct tw68_buf, vb);
444 struct sg_table *dma = vb2_dma_sg_plane_desc(vb, 0);
447 size = (dev->width * dev->height * dev->fmt->depth) >> 3;
448 if (vb2_plane_size(vb, 0) < size)
450 vb2_set_plane_payload(vb, 0, size);
452 bpl = (dev->width * dev->fmt->depth) >> 3;
453 switch (dev->field) {
455 tw68_risc_buffer(dev->pci, buf, dma->sgl,
456 0, UNSET, bpl, 0, dev->height);
458 case V4L2_FIELD_BOTTOM:
459 tw68_risc_buffer(dev->pci, buf, dma->sgl,
460 UNSET, 0, bpl, 0, dev->height);
462 case V4L2_FIELD_SEQ_TB:
463 tw68_risc_buffer(dev->pci, buf, dma->sgl,
464 0, bpl * (dev->height >> 1),
465 bpl, 0, dev->height >> 1);
467 case V4L2_FIELD_SEQ_BT:
468 tw68_risc_buffer(dev->pci, buf, dma->sgl,
469 bpl * (dev->height >> 1), 0,
470 bpl, 0, dev->height >> 1);
472 case V4L2_FIELD_INTERLACED:
474 tw68_risc_buffer(dev->pci, buf, dma->sgl,
475 0, bpl, bpl, bpl, dev->height >> 1);
481 static void tw68_buf_finish(struct vb2_buffer *vb)
483 struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
484 struct vb2_queue *vq = vb->vb2_queue;
485 struct tw68_dev *dev = vb2_get_drv_priv(vq);
486 struct tw68_buf *buf = container_of(vbuf, struct tw68_buf, vb);
488 dma_free_coherent(&dev->pci->dev, buf->size, buf->cpu, buf->dma);
491 static int tw68_start_streaming(struct vb2_queue *q, unsigned int count)
493 struct tw68_dev *dev = vb2_get_drv_priv(q);
494 struct tw68_buf *buf =
495 container_of(dev->active.next, struct tw68_buf, list);
498 tw68_video_start_dma(dev, buf);
502 static void tw68_stop_streaming(struct vb2_queue *q)
504 struct tw68_dev *dev = vb2_get_drv_priv(q);
506 /* Stop risc & fifo */
507 tw_clearl(TW68_DMAC, TW68_DMAP_EN | TW68_FIFO_EN);
508 while (!list_empty(&dev->active)) {
509 struct tw68_buf *buf =
510 container_of(dev->active.next, struct tw68_buf, list);
512 list_del(&buf->list);
513 vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
517 static const struct vb2_ops tw68_video_qops = {
518 .queue_setup = tw68_queue_setup,
519 .buf_queue = tw68_buf_queue,
520 .buf_prepare = tw68_buf_prepare,
521 .buf_finish = tw68_buf_finish,
522 .start_streaming = tw68_start_streaming,
523 .stop_streaming = tw68_stop_streaming,
524 .wait_prepare = vb2_ops_wait_prepare,
525 .wait_finish = vb2_ops_wait_finish,
528 /* ------------------------------------------------------------------ */
530 static int tw68_s_ctrl(struct v4l2_ctrl *ctrl)
532 struct tw68_dev *dev =
533 container_of(ctrl->handler, struct tw68_dev, hdl);
536 case V4L2_CID_BRIGHTNESS:
537 tw_writeb(TW68_BRIGHT, ctrl->val);
540 tw_writeb(TW68_HUE, ctrl->val);
542 case V4L2_CID_CONTRAST:
543 tw_writeb(TW68_CONTRAST, ctrl->val);
545 case V4L2_CID_SATURATION:
546 tw_writeb(TW68_SAT_U, ctrl->val);
547 tw_writeb(TW68_SAT_V, ctrl->val);
549 case V4L2_CID_COLOR_KILLER:
551 tw_andorb(TW68_MISC2, 0xe0, 0xe0);
553 tw_andorb(TW68_MISC2, 0xe0, 0x00);
555 case V4L2_CID_CHROMA_AGC:
557 tw_andorb(TW68_LOOP, 0x30, 0x20);
559 tw_andorb(TW68_LOOP, 0x30, 0x00);
565 /* ------------------------------------------------------------------ */
568 * Note that this routine returns what is stored in the fh structure, and
569 * does not interrogate any of the device registers.
571 static int tw68_g_fmt_vid_cap(struct file *file, void *priv,
572 struct v4l2_format *f)
574 struct tw68_dev *dev = video_drvdata(file);
576 f->fmt.pix.width = dev->width;
577 f->fmt.pix.height = dev->height;
578 f->fmt.pix.field = dev->field;
579 f->fmt.pix.pixelformat = dev->fmt->fourcc;
580 f->fmt.pix.bytesperline =
581 (f->fmt.pix.width * (dev->fmt->depth)) >> 3;
582 f->fmt.pix.sizeimage =
583 f->fmt.pix.height * f->fmt.pix.bytesperline;
584 f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
588 static int tw68_try_fmt_vid_cap(struct file *file, void *priv,
589 struct v4l2_format *f)
591 struct tw68_dev *dev = video_drvdata(file);
592 const struct tw68_format *fmt;
593 enum v4l2_field field;
596 fmt = format_by_fourcc(f->fmt.pix.pixelformat);
600 field = f->fmt.pix.field;
601 maxh = (dev->tvnorm->id & V4L2_STD_525_60) ? 480 : 576;
605 case V4L2_FIELD_BOTTOM:
607 case V4L2_FIELD_INTERLACED:
608 case V4L2_FIELD_SEQ_BT:
609 case V4L2_FIELD_SEQ_TB:
613 field = (f->fmt.pix.height > maxh / 2)
614 ? V4L2_FIELD_INTERLACED
619 f->fmt.pix.field = field;
620 if (f->fmt.pix.width < 48)
621 f->fmt.pix.width = 48;
622 if (f->fmt.pix.height < 32)
623 f->fmt.pix.height = 32;
624 if (f->fmt.pix.width > 720)
625 f->fmt.pix.width = 720;
626 if (f->fmt.pix.height > maxh)
627 f->fmt.pix.height = maxh;
628 f->fmt.pix.width &= ~0x03;
629 f->fmt.pix.bytesperline =
630 (f->fmt.pix.width * (fmt->depth)) >> 3;
631 f->fmt.pix.sizeimage =
632 f->fmt.pix.height * f->fmt.pix.bytesperline;
633 f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
638 * Note that tw68_s_fmt_vid_cap sets the information into the fh structure,
639 * and it will be used for all future new buffers. However, there could be
640 * some number of buffers on the "active" chain which will be filled before
641 * the change takes place.
643 static int tw68_s_fmt_vid_cap(struct file *file, void *priv,
644 struct v4l2_format *f)
646 struct tw68_dev *dev = video_drvdata(file);
649 err = tw68_try_fmt_vid_cap(file, priv, f);
653 dev->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
654 dev->width = f->fmt.pix.width;
655 dev->height = f->fmt.pix.height;
656 dev->field = f->fmt.pix.field;
660 static int tw68_enum_input(struct file *file, void *priv,
661 struct v4l2_input *i)
663 struct tw68_dev *dev = video_drvdata(file);
667 if (n >= TW68_INPUT_MAX)
670 i->type = V4L2_INPUT_TYPE_CAMERA;
671 snprintf(i->name, sizeof(i->name), "Composite %d", n);
673 /* If the query is for the current input, get live data */
674 if (n == dev->input) {
675 int v1 = tw_readb(TW68_STATUS1);
676 int v2 = tw_readb(TW68_MVSN);
678 if (0 != (v1 & (1 << 7)))
679 i->status |= V4L2_IN_ST_NO_SYNC;
680 if (0 != (v1 & (1 << 6)))
681 i->status |= V4L2_IN_ST_NO_H_LOCK;
682 if (0 != (v1 & (1 << 2)))
683 i->status |= V4L2_IN_ST_NO_SIGNAL;
684 if (0 != (v1 & 1 << 1))
685 i->status |= V4L2_IN_ST_NO_COLOR;
686 if (0 != (v2 & (1 << 2)))
687 i->status |= V4L2_IN_ST_MACROVISION;
689 i->std = video_devdata(file)->tvnorms;
693 static int tw68_g_input(struct file *file, void *priv, unsigned int *i)
695 struct tw68_dev *dev = video_drvdata(file);
701 static int tw68_s_input(struct file *file, void *priv, unsigned int i)
703 struct tw68_dev *dev = video_drvdata(file);
705 if (i >= TW68_INPUT_MAX)
708 tw_andorb(TW68_INFORM, 0x03 << 2, dev->input << 2);
712 static int tw68_querycap(struct file *file, void *priv,
713 struct v4l2_capability *cap)
715 strscpy(cap->driver, "tw68", sizeof(cap->driver));
716 strscpy(cap->card, "Techwell Capture Card",
721 static int tw68_s_std(struct file *file, void *priv, v4l2_std_id id)
723 struct tw68_dev *dev = video_drvdata(file);
726 if (vb2_is_busy(&dev->vidq))
729 /* Look for match on complete norm id (may have mult bits) */
730 for (i = 0; i < TVNORMS; i++) {
731 if (id == tvnorms[i].id)
735 /* If no exact match, look for norm which contains this one */
737 for (i = 0; i < TVNORMS; i++)
738 if (id & tvnorms[i].id)
741 /* If still not matched, give up */
745 set_tvnorm(dev, &tvnorms[i]); /* do the actual setting */
749 static int tw68_g_std(struct file *file, void *priv, v4l2_std_id *id)
751 struct tw68_dev *dev = video_drvdata(file);
753 *id = dev->tvnorm->id;
757 static int tw68_enum_fmt_vid_cap(struct file *file, void *priv,
758 struct v4l2_fmtdesc *f)
760 if (f->index >= FORMATS)
763 f->pixelformat = formats[f->index].fourcc;
769 * Used strictly for internal development and debugging, this routine
770 * prints out the current register contents for the tw68xx device.
772 static void tw68_dump_regs(struct tw68_dev *dev)
774 unsigned char line[80];
778 pr_info("Full dump of TW68 registers:\n");
779 /* First we do the PCI regs, 8 4-byte regs per line */
780 for (i = 0; i < 0x100; i += 32) {
782 cptr += sprintf(cptr, "%03x ", i);
783 /* j steps through the next 4 words */
784 for (j = i; j < i + 16; j += 4)
785 cptr += sprintf(cptr, "%08x ", tw_readl(j));
787 for (; j < i + 32; j += 4)
788 cptr += sprintf(cptr, "%08x ", tw_readl(j));
793 /* Next the control regs, which are single-byte, address mod 4 */
796 cptr += sprintf(cptr, "%03x ", i);
797 /* Print out 4 groups of 4 bytes */
798 for (j = 0; j < 4; j++) {
799 for (k = 0; k < 4; k++) {
800 cptr += sprintf(cptr, "%02x ",
812 static int vidioc_log_status(struct file *file, void *priv)
814 struct tw68_dev *dev = video_drvdata(file);
817 return v4l2_ctrl_log_status(file, priv);
820 #ifdef CONFIG_VIDEO_ADV_DEBUG
821 static int vidioc_g_register(struct file *file, void *priv,
822 struct v4l2_dbg_register *reg)
824 struct tw68_dev *dev = video_drvdata(file);
827 reg->val = tw_readb(reg->reg);
829 reg->val = tw_readl(reg->reg);
833 static int vidioc_s_register(struct file *file, void *priv,
834 const struct v4l2_dbg_register *reg)
836 struct tw68_dev *dev = video_drvdata(file);
839 tw_writeb(reg->reg, reg->val);
841 tw_writel(reg->reg & 0xffff, reg->val);
846 static const struct v4l2_ctrl_ops tw68_ctrl_ops = {
847 .s_ctrl = tw68_s_ctrl,
850 static const struct v4l2_file_operations video_fops = {
851 .owner = THIS_MODULE,
852 .open = v4l2_fh_open,
853 .release = vb2_fop_release,
854 .read = vb2_fop_read,
855 .poll = vb2_fop_poll,
856 .mmap = vb2_fop_mmap,
857 .unlocked_ioctl = video_ioctl2,
860 static const struct v4l2_ioctl_ops video_ioctl_ops = {
861 .vidioc_querycap = tw68_querycap,
862 .vidioc_enum_fmt_vid_cap = tw68_enum_fmt_vid_cap,
863 .vidioc_reqbufs = vb2_ioctl_reqbufs,
864 .vidioc_create_bufs = vb2_ioctl_create_bufs,
865 .vidioc_querybuf = vb2_ioctl_querybuf,
866 .vidioc_qbuf = vb2_ioctl_qbuf,
867 .vidioc_dqbuf = vb2_ioctl_dqbuf,
868 .vidioc_s_std = tw68_s_std,
869 .vidioc_g_std = tw68_g_std,
870 .vidioc_enum_input = tw68_enum_input,
871 .vidioc_g_input = tw68_g_input,
872 .vidioc_s_input = tw68_s_input,
873 .vidioc_streamon = vb2_ioctl_streamon,
874 .vidioc_streamoff = vb2_ioctl_streamoff,
875 .vidioc_g_fmt_vid_cap = tw68_g_fmt_vid_cap,
876 .vidioc_try_fmt_vid_cap = tw68_try_fmt_vid_cap,
877 .vidioc_s_fmt_vid_cap = tw68_s_fmt_vid_cap,
878 .vidioc_log_status = vidioc_log_status,
879 .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
880 .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
881 #ifdef CONFIG_VIDEO_ADV_DEBUG
882 .vidioc_g_register = vidioc_g_register,
883 .vidioc_s_register = vidioc_s_register,
887 static const struct video_device tw68_video_template = {
888 .name = "tw68_video",
890 .ioctl_ops = &video_ioctl_ops,
891 .release = video_device_release_empty,
892 .tvnorms = TW68_NORMS,
893 .device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
897 /* ------------------------------------------------------------------ */
899 void tw68_set_tvnorm_hw(struct tw68_dev *dev)
901 tw_andorb(TW68_SDT, 0x07, dev->tvnorm->format);
904 int tw68_video_init1(struct tw68_dev *dev)
906 struct v4l2_ctrl_handler *hdl = &dev->hdl;
908 v4l2_ctrl_handler_init(hdl, 6);
909 v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
910 V4L2_CID_BRIGHTNESS, -128, 127, 1, 20);
911 v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
912 V4L2_CID_CONTRAST, 0, 255, 1, 100);
913 v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
914 V4L2_CID_SATURATION, 0, 255, 1, 128);
916 v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
917 V4L2_CID_HUE, -128, 127, 1, 0);
918 v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
919 V4L2_CID_COLOR_KILLER, 0, 1, 1, 0);
920 v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
921 V4L2_CID_CHROMA_AGC, 0, 1, 1, 1);
923 v4l2_ctrl_handler_free(hdl);
926 dev->v4l2_dev.ctrl_handler = hdl;
927 v4l2_ctrl_handler_setup(hdl);
931 int tw68_video_init2(struct tw68_dev *dev, int video_nr)
935 set_tvnorm(dev, &tvnorms[0]);
937 dev->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24);
940 dev->field = V4L2_FIELD_INTERLACED;
942 INIT_LIST_HEAD(&dev->active);
943 dev->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
944 dev->vidq.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
945 dev->vidq.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ | VB2_DMABUF;
946 dev->vidq.ops = &tw68_video_qops;
947 dev->vidq.mem_ops = &vb2_dma_sg_memops;
948 dev->vidq.drv_priv = dev;
949 dev->vidq.gfp_flags = __GFP_DMA32 | __GFP_KSWAPD_RECLAIM;
950 dev->vidq.buf_struct_size = sizeof(struct tw68_buf);
951 dev->vidq.lock = &dev->lock;
952 dev->vidq.min_buffers_needed = 2;
953 dev->vidq.dev = &dev->pci->dev;
954 ret = vb2_queue_init(&dev->vidq);
957 dev->vdev = tw68_video_template;
958 dev->vdev.v4l2_dev = &dev->v4l2_dev;
959 dev->vdev.lock = &dev->lock;
960 dev->vdev.queue = &dev->vidq;
961 video_set_drvdata(&dev->vdev, dev);
962 return video_register_device(&dev->vdev, VFL_TYPE_VIDEO, video_nr);
966 * tw68_irq_video_done
968 void tw68_irq_video_done(struct tw68_dev *dev, unsigned long status)
972 /* reset interrupts handled by this routine */
973 tw_writel(TW68_INTSTAT, status);
975 * Check most likely first
977 * DMAPI shows we have reached the end of the risc code
978 * for the current buffer.
980 if (status & TW68_DMAPI) {
981 struct tw68_buf *buf;
983 spin_lock(&dev->slock);
984 buf = list_entry(dev->active.next, struct tw68_buf, list);
985 list_del(&buf->list);
986 spin_unlock(&dev->slock);
987 buf->vb.vb2_buf.timestamp = ktime_get_ns();
988 buf->vb.field = dev->field;
989 buf->vb.sequence = dev->seqnr++;
990 vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
991 status &= ~(TW68_DMAPI);
995 if (status & (TW68_VLOCK | TW68_HLOCK))
996 dev_dbg(&dev->pci->dev, "Lost sync\n");
997 if (status & TW68_PABORT)
998 dev_err(&dev->pci->dev, "PABORT interrupt\n");
999 if (status & TW68_DMAPERR)
1000 dev_err(&dev->pci->dev, "DMAPERR interrupt\n");
1002 * On TW6800, FDMIS is apparently generated if video input is switched
1003 * during operation. Therefore, it is not enabled for that chip.
1005 if (status & TW68_FDMIS)
1006 dev_dbg(&dev->pci->dev, "FDMIS interrupt\n");
1007 if (status & TW68_FFOF) {
1008 /* probably a logic error */
1009 reg = tw_readl(TW68_DMAC) & TW68_FIFO_EN;
1010 tw_clearl(TW68_DMAC, TW68_FIFO_EN);
1011 dev_dbg(&dev->pci->dev, "FFOF interrupt\n");
1012 tw_setl(TW68_DMAC, reg);
1014 if (status & TW68_FFERR)
1015 dev_dbg(&dev->pci->dev, "FFERR interrupt\n");