2 * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
5 * Ben Collins <bcollins@ubuntu.com>
8 * John Brooks <john.brooks@bluecherry.net>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
24 #include <linux/pci.h>
25 #include <linux/i2c.h>
26 #include <linux/mutex.h>
27 #include <linux/list.h>
28 #include <linux/wait.h>
29 #include <linux/stringify.h>
31 #include <linux/atomic.h>
32 #include <linux/slab.h>
33 #include <linux/videodev2.h>
35 #include <media/v4l2-dev.h>
36 #include <media/v4l2-device.h>
37 #include <media/v4l2-ctrls.h>
38 #include <media/videobuf2-v4l2.h>
40 #include "solo6x10-regs.h"
42 #ifndef PCI_VENDOR_ID_SOFTLOGIC
43 #define PCI_VENDOR_ID_SOFTLOGIC 0x9413
44 #define PCI_DEVICE_ID_SOLO6010 0x6010
45 #define PCI_DEVICE_ID_SOLO6110 0x6110
48 #ifndef PCI_VENDOR_ID_BLUECHERRY
49 #define PCI_VENDOR_ID_BLUECHERRY 0x1BB3
50 /* Neugent Softlogic 6010 based cards */
51 #define PCI_DEVICE_ID_NEUSOLO_4 0x4304
52 #define PCI_DEVICE_ID_NEUSOLO_9 0x4309
53 #define PCI_DEVICE_ID_NEUSOLO_16 0x4310
54 /* Bluecherry Softlogic 6010 based cards */
55 #define PCI_DEVICE_ID_BC_SOLO_4 0x4E04
56 #define PCI_DEVICE_ID_BC_SOLO_9 0x4E09
57 #define PCI_DEVICE_ID_BC_SOLO_16 0x4E10
58 /* Bluecherry Softlogic 6110 based cards */
59 #define PCI_DEVICE_ID_BC_6110_4 0x5304
60 #define PCI_DEVICE_ID_BC_6110_8 0x5308
61 #define PCI_DEVICE_ID_BC_6110_16 0x5310
62 #endif /* Bluecherry */
64 /* Used in pci_device_id, and solo_dev->type */
65 #define SOLO_DEV_6010 0
66 #define SOLO_DEV_6110 1
68 #define SOLO6X10_NAME "solo6x10"
70 #define SOLO_MAX_CHANNELS 16
72 #define SOLO6X10_VERSION "3.0.0"
75 * The SOLO6x10 actually has 8 i2c channels, but we only use 2.
76 * 0 - Techwell chip(s)
79 #define SOLO_I2C_ADAPTERS 2
81 #define SOLO_I2C_SAA 1
83 /* DMA Engine setup */
85 #define SOLO_NR_P2M_DESC 256
86 #define SOLO_P2M_DESC_SIZE (SOLO_NR_P2M_DESC * 16)
88 /* Encoder standard modes */
89 #define SOLO_ENC_MODE_CIF 2
90 #define SOLO_ENC_MODE_HD1 1
91 #define SOLO_ENC_MODE_D1 9
93 #define SOLO_DEFAULT_QP 3
95 #define SOLO_CID_CUSTOM_BASE (V4L2_CID_USER_BASE | 0xf000)
96 #define V4L2_CID_MOTION_TRACE (SOLO_CID_CUSTOM_BASE+2)
97 #define V4L2_CID_OSD_TEXT (SOLO_CID_CUSTOM_BASE+3)
100 * Motion thresholds are in a table of 64x64 samples, with
101 * each sample representing 16x16 pixels of the source. In
102 * effect, 44x30 samples are used for NTSC, and 44x36 for PAL.
103 * The 5th sample on the 10th row is (10*64)+5 = 645.
105 * Internally it is stored as a 45x45 array (45*16 = 720, which is the
106 * maximum PAL/NTSC width).
108 #define SOLO_MOTION_SZ (45)
110 enum SOLO_I2C_STATE {
118 /* Defined in Table 4-16, Page 68-69 of the 6010 Datasheet */
119 struct solo_p2m_desc {
126 struct solo_p2m_dev {
128 struct completion completion;
131 struct solo_p2m_desc *descs;
135 #define OSD_TEXT_MAX 44
137 struct solo_vb2_buf {
138 struct vb2_v4l2_buffer vb;
139 struct list_head list;
142 enum solo_enc_types {
147 struct solo_enc_dev {
148 struct solo_dev *solo_dev;
150 struct v4l2_ctrl_handler hdl;
151 struct v4l2_ctrl *md_thresholds;
152 struct video_device *vfd;
153 /* General accounting */
155 spinlock_t motion_lock;
157 u8 mode, gop, qp, interlaced, interval;
166 char osd_text[OSD_TEXT_MAX + 1];
167 u8 osd_buf[SOLO_EOSD_EXT_SIZE_MAX]
173 u8 jpeg_header[1024];
177 enum solo_enc_types type;
179 struct vb2_queue vidq;
180 struct list_head vidq_active;
183 struct solo_p2m_desc *desc_items;
188 /* The SOLO6x10 PCI Device */
191 struct pci_dev *pdev;
193 unsigned int time_sync;
194 unsigned int usec_lsb;
195 unsigned int clock_mhz;
196 u8 __iomem *reg_base;
201 struct v4l2_device v4l2_dev;
203 /* tw28xx accounting */
204 u8 tw2865, tw2864, tw2815;
207 /* i2c related items */
208 struct i2c_adapter i2c_adap[SOLO_I2C_ADAPTERS];
209 enum SOLO_I2C_STATE i2c_state;
210 struct mutex i2c_mutex;
212 wait_queue_head_t i2c_wait;
213 struct i2c_msg *i2c_msg;
214 unsigned int i2c_msg_num;
215 unsigned int i2c_msg_ptr;
218 struct solo_p2m_dev p2m_dev[SOLO_NR_P2M];
221 unsigned int p2m_timeouts;
223 /* V4L2 Display items */
224 struct video_device *vfd;
225 unsigned int erasing;
226 unsigned int frame_blank;
228 wait_queue_head_t disp_thread_wait;
229 struct v4l2_ctrl_handler disp_hdl;
231 /* V4L2 Encoder items */
232 struct solo_enc_dev *v4l2_enc[SOLO_MAX_CHANNELS];
234 /* IDX into hw mp4 encoder */
237 /* Current video settings */
239 u16 video_hsize, video_vsize;
240 u16 vout_hstart, vout_vstart;
241 u16 vin_hstart, vin_vstart;
244 /* JPEG Qp setting */
245 spinlock_t jpeg_qp_lock;
248 /* Audio components */
249 struct snd_card *snd_card;
250 struct snd_pcm *snd_pcm;
257 struct bin_attribute sdram_attr;
258 unsigned int sys_config;
261 struct task_struct *ring_thread;
262 wait_queue_head_t ring_thread_wait;
264 /* VOP_HEADER handling */
269 /* Buffer handling */
270 struct vb2_queue vidq;
272 struct task_struct *kthread;
276 struct list_head vidq_active;
279 static inline u32 solo_reg_read(struct solo_dev *solo_dev, int reg)
281 return readl(solo_dev->reg_base + reg);
284 static inline void solo_reg_write(struct solo_dev *solo_dev, int reg,
289 writel(data, solo_dev->reg_base + reg);
290 pci_read_config_word(solo_dev->pdev, PCI_STATUS, &val);
293 static inline void solo_irq_on(struct solo_dev *dev, u32 mask)
295 dev->irq_mask |= mask;
296 solo_reg_write(dev, SOLO_IRQ_MASK, dev->irq_mask);
299 static inline void solo_irq_off(struct solo_dev *dev, u32 mask)
301 dev->irq_mask &= ~mask;
302 solo_reg_write(dev, SOLO_IRQ_MASK, dev->irq_mask);
305 /* Init/exit routines for subsystems */
306 int solo_disp_init(struct solo_dev *solo_dev);
307 void solo_disp_exit(struct solo_dev *solo_dev);
309 int solo_gpio_init(struct solo_dev *solo_dev);
310 void solo_gpio_exit(struct solo_dev *solo_dev);
312 int solo_i2c_init(struct solo_dev *solo_dev);
313 void solo_i2c_exit(struct solo_dev *solo_dev);
315 int solo_p2m_init(struct solo_dev *solo_dev);
316 void solo_p2m_exit(struct solo_dev *solo_dev);
318 int solo_v4l2_init(struct solo_dev *solo_dev, unsigned nr);
319 void solo_v4l2_exit(struct solo_dev *solo_dev);
321 int solo_enc_init(struct solo_dev *solo_dev);
322 void solo_enc_exit(struct solo_dev *solo_dev);
324 int solo_enc_v4l2_init(struct solo_dev *solo_dev, unsigned nr);
325 void solo_enc_v4l2_exit(struct solo_dev *solo_dev);
327 int solo_g723_init(struct solo_dev *solo_dev);
328 void solo_g723_exit(struct solo_dev *solo_dev);
331 int solo_i2c_isr(struct solo_dev *solo_dev);
332 void solo_p2m_isr(struct solo_dev *solo_dev, int id);
333 void solo_p2m_error_isr(struct solo_dev *solo_dev);
334 void solo_enc_v4l2_isr(struct solo_dev *solo_dev);
335 void solo_g723_isr(struct solo_dev *solo_dev);
336 void solo_motion_isr(struct solo_dev *solo_dev);
337 void solo_video_in_isr(struct solo_dev *solo_dev);
340 u8 solo_i2c_readbyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off);
341 void solo_i2c_writebyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off,
345 int solo_p2m_dma_t(struct solo_dev *solo_dev, int wr,
346 dma_addr_t dma_addr, u32 ext_addr, u32 size,
347 int repeat, u32 ext_size);
348 int solo_p2m_dma(struct solo_dev *solo_dev, int wr,
349 void *sys_addr, u32 ext_addr, u32 size,
350 int repeat, u32 ext_size);
351 void solo_p2m_fill_desc(struct solo_p2m_desc *desc, int wr,
352 dma_addr_t dma_addr, u32 ext_addr, u32 size,
353 int repeat, u32 ext_size);
354 int solo_p2m_dma_desc(struct solo_dev *solo_dev,
355 struct solo_p2m_desc *desc, dma_addr_t desc_dma,
358 /* Global s_std ioctl */
359 int solo_set_video_type(struct solo_dev *solo_dev, bool is_50hz);
360 void solo_update_mode(struct solo_enc_dev *solo_enc);
362 /* Set the threshold for motion detection */
363 int solo_set_motion_threshold(struct solo_dev *solo_dev, u8 ch, u16 val);
364 int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch,
365 const u16 *thresholds);
366 #define SOLO_DEF_MOT_THRESH 0x0300
368 /* Write text on OSD */
369 int solo_osd_print(struct solo_enc_dev *solo_enc);
371 /* EEPROM commands */
372 unsigned int solo_eeprom_ewen(struct solo_dev *solo_dev, int w_en);
373 __be16 solo_eeprom_read(struct solo_dev *solo_dev, int loc);
374 int solo_eeprom_write(struct solo_dev *solo_dev, int loc,
377 /* JPEG Qp functions */
378 void solo_s_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch,
380 int solo_g_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch);
382 #define CHK_FLAGS(v, flags) (((v) & (flags)) == (flags))
384 #endif /* __SOLO6X10_H */