GNU Linux-libre 5.10.153-gnu1
[releases.git] / drivers / media / pci / saa7146 / mxb.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3     mxb - v4l2 driver for the Multimedia eXtension Board
4
5     Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>
6
7     Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html
8     for further details about this card.
9
10 */
11
12 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
13
14 #define DEBUG_VARIABLE debug
15
16 #include <media/drv-intf/saa7146_vv.h>
17 #include <media/tuner.h>
18 #include <media/v4l2-common.h>
19 #include <media/i2c/saa7115.h>
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22
23 #include "tea6415c.h"
24 #include "tea6420.h"
25
26 #define MXB_AUDIOS      6
27
28 #define I2C_SAA7111A  0x24
29 #define I2C_TDA9840   0x42
30 #define I2C_TEA6415C  0x43
31 #define I2C_TEA6420_1 0x4c
32 #define I2C_TEA6420_2 0x4d
33 #define I2C_TUNER     0x60
34
35 #define MXB_BOARD_CAN_DO_VBI(dev)   (dev->revision != 0)
36
37 /* global variable */
38 static int mxb_num;
39
40 /* initial frequence the tuner will be tuned to.
41    in verden (lower saxony, germany) 4148 is a
42    channel called "phoenix" */
43 static int freq = 4148;
44 module_param(freq, int, 0644);
45 MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup");
46
47 static int debug;
48 module_param(debug, int, 0644);
49 MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
50
51 #define MXB_INPUTS 4
52 enum { TUNER, AUX1, AUX3, AUX3_YC };
53
54 static struct v4l2_input mxb_inputs[MXB_INPUTS] = {
55         { TUNER,   "Tuner",          V4L2_INPUT_TYPE_TUNER,  0x3f, 0,
56                 V4L2_STD_PAL_BG | V4L2_STD_PAL_I, 0, V4L2_IN_CAP_STD },
57         { AUX1,    "AUX1",           V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
58                 V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
59         { AUX3,    "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
60                 V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
61         { AUX3_YC, "AUX3 S-Video",   V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
62                 V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
63 };
64
65 /* this array holds the information, which port of the saa7146 each
66    input actually uses. the mxb uses port 0 for every input */
67 static struct {
68         int hps_source;
69         int hps_sync;
70 } input_port_selection[MXB_INPUTS] = {
71         { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
72         { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
73         { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
74         { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
75 };
76
77 /* this array holds the information of the audio source (mxb_audios),
78    which has to be switched corresponding to the video source (mxb_channels) */
79 static int video_audio_connect[MXB_INPUTS] =
80         { 0, 1, 3, 3 };
81
82 struct mxb_routing {
83         u32 input;
84         u32 output;
85 };
86
87 /* these are the available audio sources, which can switched
88    to the line- and cd-output individually */
89 static struct v4l2_audio mxb_audios[MXB_AUDIOS] = {
90             {
91                 .index  = 0,
92                 .name   = "Tuner",
93                 .capability = V4L2_AUDCAP_STEREO,
94         } , {
95                 .index  = 1,
96                 .name   = "AUX1",
97                 .capability = V4L2_AUDCAP_STEREO,
98         } , {
99                 .index  = 2,
100                 .name   = "AUX2",
101                 .capability = V4L2_AUDCAP_STEREO,
102         } , {
103                 .index  = 3,
104                 .name   = "AUX3",
105                 .capability = V4L2_AUDCAP_STEREO,
106         } , {
107                 .index  = 4,
108                 .name   = "Radio (X9)",
109                 .capability = V4L2_AUDCAP_STEREO,
110         } , {
111                 .index  = 5,
112                 .name   = "CD-ROM (X10)",
113                 .capability = V4L2_AUDCAP_STEREO,
114         }
115 };
116
117 /* These are the necessary input-output-pins for bringing one audio source
118    (see above) to the CD-output. Note that gain is set to 0 in this table. */
119 static struct mxb_routing TEA6420_cd[MXB_AUDIOS + 1][2] = {
120         { { 1, 1 }, { 1, 1 } }, /* Tuner */
121         { { 5, 1 }, { 6, 1 } }, /* AUX 1 */
122         { { 4, 1 }, { 6, 1 } }, /* AUX 2 */
123         { { 3, 1 }, { 6, 1 } }, /* AUX 3 */
124         { { 1, 1 }, { 3, 1 } }, /* Radio */
125         { { 1, 1 }, { 2, 1 } }, /* CD-Rom */
126         { { 6, 1 }, { 6, 1 } }  /* Mute */
127 };
128
129 /* These are the necessary input-output-pins for bringing one audio source
130    (see above) to the line-output. Note that gain is set to 0 in this table. */
131 static struct mxb_routing TEA6420_line[MXB_AUDIOS + 1][2] = {
132         { { 2, 3 }, { 1, 2 } },
133         { { 5, 3 }, { 6, 2 } },
134         { { 4, 3 }, { 6, 2 } },
135         { { 3, 3 }, { 6, 2 } },
136         { { 2, 3 }, { 3, 2 } },
137         { { 2, 3 }, { 2, 2 } },
138         { { 6, 3 }, { 6, 2 } }  /* Mute */
139 };
140
141 struct mxb
142 {
143         struct video_device     video_dev;
144         struct video_device     vbi_dev;
145
146         struct i2c_adapter      i2c_adapter;
147
148         struct v4l2_subdev      *saa7111a;
149         struct v4l2_subdev      *tda9840;
150         struct v4l2_subdev      *tea6415c;
151         struct v4l2_subdev      *tuner;
152         struct v4l2_subdev      *tea6420_1;
153         struct v4l2_subdev      *tea6420_2;
154
155         int     cur_mode;       /* current audio mode (mono, stereo, ...) */
156         int     cur_input;      /* current input */
157         int     cur_audinput;   /* current audio input */
158         int     cur_mute;       /* current mute status */
159         struct v4l2_frequency   cur_freq;       /* current frequency the tuner is tuned to */
160 };
161
162 #define saa7111a_call(mxb, o, f, args...) \
163         v4l2_subdev_call(mxb->saa7111a, o, f, ##args)
164 #define tda9840_call(mxb, o, f, args...) \
165         v4l2_subdev_call(mxb->tda9840, o, f, ##args)
166 #define tea6415c_call(mxb, o, f, args...) \
167         v4l2_subdev_call(mxb->tea6415c, o, f, ##args)
168 #define tuner_call(mxb, o, f, args...) \
169         v4l2_subdev_call(mxb->tuner, o, f, ##args)
170 #define call_all(dev, o, f, args...) \
171         v4l2_device_call_until_err(&dev->v4l2_dev, 0, o, f, ##args)
172
173 static void mxb_update_audmode(struct mxb *mxb)
174 {
175         struct v4l2_tuner t = {
176                 .audmode = mxb->cur_mode,
177         };
178
179         tda9840_call(mxb, tuner, s_tuner, &t);
180 }
181
182 static inline void tea6420_route(struct mxb *mxb, int idx)
183 {
184         v4l2_subdev_call(mxb->tea6420_1, audio, s_routing,
185                 TEA6420_cd[idx][0].input, TEA6420_cd[idx][0].output, 0);
186         v4l2_subdev_call(mxb->tea6420_2, audio, s_routing,
187                 TEA6420_cd[idx][1].input, TEA6420_cd[idx][1].output, 0);
188         v4l2_subdev_call(mxb->tea6420_1, audio, s_routing,
189                 TEA6420_line[idx][0].input, TEA6420_line[idx][0].output, 0);
190         v4l2_subdev_call(mxb->tea6420_2, audio, s_routing,
191                 TEA6420_line[idx][1].input, TEA6420_line[idx][1].output, 0);
192 }
193
194 static struct saa7146_extension extension;
195
196 static int mxb_s_ctrl(struct v4l2_ctrl *ctrl)
197 {
198         struct saa7146_dev *dev = container_of(ctrl->handler,
199                                 struct saa7146_dev, ctrl_handler);
200         struct mxb *mxb = dev->ext_priv;
201
202         switch (ctrl->id) {
203         case V4L2_CID_AUDIO_MUTE:
204                 mxb->cur_mute = ctrl->val;
205                 /* switch the audio-source */
206                 tea6420_route(mxb, ctrl->val ? 6 :
207                                 video_audio_connect[mxb->cur_input]);
208                 break;
209         default:
210                 return -EINVAL;
211         }
212         return 0;
213 }
214
215 static const struct v4l2_ctrl_ops mxb_ctrl_ops = {
216         .s_ctrl = mxb_s_ctrl,
217 };
218
219 static int mxb_probe(struct saa7146_dev *dev)
220 {
221         struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
222         struct mxb *mxb = NULL;
223
224         v4l2_ctrl_new_std(hdl, &mxb_ctrl_ops,
225                         V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
226         if (hdl->error)
227                 return hdl->error;
228         mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL);
229         if (mxb == NULL) {
230                 DEB_D("not enough kernel memory\n");
231                 return -ENOMEM;
232         }
233
234
235         snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num);
236
237         saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
238         if (i2c_add_adapter(&mxb->i2c_adapter) < 0) {
239                 DEB_S("cannot register i2c-device. skipping.\n");
240                 kfree(mxb);
241                 return -EFAULT;
242         }
243
244         mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
245                         "saa7111", I2C_SAA7111A, NULL);
246         mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
247                         "tea6420", I2C_TEA6420_1, NULL);
248         mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
249                         "tea6420", I2C_TEA6420_2, NULL);
250         mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
251                         "tea6415c", I2C_TEA6415C, NULL);
252         mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
253                         "tda9840", I2C_TDA9840, NULL);
254         mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
255                         "tuner", I2C_TUNER, NULL);
256
257         /* check if all devices are present */
258         if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
259             !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) {
260                 pr_err("did not find all i2c devices. aborting\n");
261                 i2c_del_adapter(&mxb->i2c_adapter);
262                 kfree(mxb);
263                 return -ENODEV;
264         }
265
266         /* all devices are present, probe was successful */
267
268         /* we store the pointer in our private data field */
269         dev->ext_priv = mxb;
270
271         v4l2_ctrl_handler_setup(hdl);
272
273         return 0;
274 }
275
276 /* some init data for the saa7740, the so-called 'sound arena module'.
277    there are no specs available, so we simply use some init values */
278 static struct {
279         int     length;
280         char    data[9];
281 } mxb_saa7740_init[] = {
282         { 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } },
283         { 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } },
284         { 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } },
285         { 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } },
286         { 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } },
287         { 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } },
288         { 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } },
289         { 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } },
290         { 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } },
291         { 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } },
292         { 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } },
293         { 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } },
294         { 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } },
295         { 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } },
296         { 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } },
297         { 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } },
298         { 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } },
299         { 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } },
300         { 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } },
301         { 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } },
302         { 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } },
303         { 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } },
304         { 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } },
305         { 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } },
306         { 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } },
307         { 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } },
308         { 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } },
309         { 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } },
310         { 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } },
311         { 3, { 0x48, 0x00, 0x01 } },
312         { 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
313         { 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
314         { 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
315         { 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
316         { 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
317         { 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
318         { 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
319         { 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
320         { 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
321         { 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
322         { 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
323         { 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
324         { 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
325         { 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
326         { 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
327         { 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
328         { 3, { 0x80, 0xb3, 0x0a } },
329         {-1, { 0 } }
330 };
331
332 /* bring hardware to a sane state. this has to be done, just in case someone
333    wants to capture from this device before it has been properly initialized.
334    the capture engine would badly fail, because no valid signal arrives on the
335    saa7146, thus leading to timeouts and stuff. */
336 static int mxb_init_done(struct saa7146_dev* dev)
337 {
338         struct mxb* mxb = (struct mxb*)dev->ext_priv;
339         struct i2c_msg msg;
340         struct tuner_setup tun_setup;
341         v4l2_std_id std = V4L2_STD_PAL_BG;
342
343         int i = 0, err = 0;
344
345         /* mute audio on tea6420s */
346         tea6420_route(mxb, 6);
347
348         /* select video mode in saa7111a */
349         saa7111a_call(mxb, video, s_std, std);
350
351         /* select tuner-output on saa7111a */
352         i = 0;
353         saa7111a_call(mxb, video, s_routing, SAA7115_COMPOSITE0,
354                 SAA7111_FMT_CCIR, 0);
355
356         /* select a tuner type */
357         tun_setup.mode_mask = T_ANALOG_TV;
358         tun_setup.addr = ADDR_UNSET;
359         tun_setup.type = TUNER_PHILIPS_PAL;
360         tuner_call(mxb, tuner, s_type_addr, &tun_setup);
361         /* tune in some frequency on tuner */
362         mxb->cur_freq.tuner = 0;
363         mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV;
364         mxb->cur_freq.frequency = freq;
365         tuner_call(mxb, tuner, s_frequency, &mxb->cur_freq);
366
367         /* set a default video standard */
368         /* These two gpio calls set the GPIO pins that control the tda9820 */
369         saa7146_write(dev, GPIO_CTRL, 0x00404050);
370         saa7111a_call(mxb, core, s_gpio, 1);
371         saa7111a_call(mxb, video, s_std, std);
372         tuner_call(mxb, video, s_std, std);
373
374         /* switch to tuner-channel on tea6415c */
375         tea6415c_call(mxb, video, s_routing, 3, 17, 0);
376
377         /* select tuner-output on multicable on tea6415c */
378         tea6415c_call(mxb, video, s_routing, 3, 13, 0);
379
380         /* the rest for mxb */
381         mxb->cur_input = 0;
382         mxb->cur_audinput = video_audio_connect[mxb->cur_input];
383         mxb->cur_mute = 1;
384
385         mxb->cur_mode = V4L2_TUNER_MODE_STEREO;
386         mxb_update_audmode(mxb);
387
388         /* check if the saa7740 (aka 'sound arena module') is present
389            on the mxb. if so, we must initialize it. due to lack of
390            information about the saa7740, the values were reverse
391            engineered. */
392         msg.addr = 0x1b;
393         msg.flags = 0;
394         msg.len = mxb_saa7740_init[0].length;
395         msg.buf = &mxb_saa7740_init[0].data[0];
396
397         err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
398         if (err == 1) {
399                 /* the sound arena module is a pos, that's probably the reason
400                    philips refuses to hand out a datasheet for the saa7740...
401                    it seems to screw up the i2c bus, so we disable fast irq
402                    based i2c transactions here and rely on the slow and safe
403                    polling method ... */
404                 extension.flags &= ~SAA7146_USE_I2C_IRQ;
405                 for (i = 1; ; i++) {
406                         if (-1 == mxb_saa7740_init[i].length)
407                                 break;
408
409                         msg.len = mxb_saa7740_init[i].length;
410                         msg.buf = &mxb_saa7740_init[i].data[0];
411                         err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
412                         if (err != 1) {
413                                 DEB_D("failed to initialize 'sound arena module'\n");
414                                 goto err;
415                         }
416                 }
417                 pr_info("'sound arena module' detected\n");
418         }
419 err:
420         /* the rest for saa7146: you should definitely set some basic values
421            for the input-port handling of the saa7146. */
422
423         /* ext->saa has been filled by the core driver */
424
425         /* some stuff is done via variables */
426         saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source,
427                         input_port_selection[mxb->cur_input].hps_sync);
428
429         /* some stuff is done via direct write to the registers */
430
431         /* this is ugly, but because of the fact that this is completely
432            hardware dependend, it should be done directly... */
433         saa7146_write(dev, DD1_STREAM_B,        0x00000000);
434         saa7146_write(dev, DD1_INIT,            0x02000200);
435         saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
436
437         return 0;
438 }
439
440 /* interrupt-handler. this gets called when irq_mask is != 0.
441    it must clear the interrupt-bits in irq_mask it has handled */
442 /*
443 void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask)
444 {
445         struct mxb* mxb = (struct mxb*)dev->ext_priv;
446 }
447 */
448
449 static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
450 {
451         DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
452         if (i->index >= MXB_INPUTS)
453                 return -EINVAL;
454         memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input));
455         return 0;
456 }
457
458 static int vidioc_g_input(struct file *file, void *fh, unsigned int *i)
459 {
460         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
461         struct mxb *mxb = (struct mxb *)dev->ext_priv;
462         *i = mxb->cur_input;
463
464         DEB_EE("VIDIOC_G_INPUT %d\n", *i);
465         return 0;
466 }
467
468 static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
469 {
470         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
471         struct mxb *mxb = (struct mxb *)dev->ext_priv;
472         int err = 0;
473         int i = 0;
474
475         DEB_EE("VIDIOC_S_INPUT %d\n", input);
476
477         if (input >= MXB_INPUTS)
478                 return -EINVAL;
479
480         mxb->cur_input = input;
481
482         saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source,
483                         input_port_selection[input].hps_sync);
484
485         /* prepare switching of tea6415c and saa7111a;
486            have a look at the 'background'-file for further information  */
487         switch (input) {
488         case TUNER:
489                 i = SAA7115_COMPOSITE0;
490
491                 err = tea6415c_call(mxb, video, s_routing, 3, 17, 0);
492
493                 /* connect tuner-output always to multicable */
494                 if (!err)
495                         err = tea6415c_call(mxb, video, s_routing, 3, 13, 0);
496                 break;
497         case AUX3_YC:
498                 /* nothing to be done here. aux3_yc is
499                    directly connected to the saa711a */
500                 i = SAA7115_SVIDEO1;
501                 break;
502         case AUX3:
503                 /* nothing to be done here. aux3 is
504                    directly connected to the saa711a */
505                 i = SAA7115_COMPOSITE1;
506                 break;
507         case AUX1:
508                 i = SAA7115_COMPOSITE0;
509                 err = tea6415c_call(mxb, video, s_routing, 1, 17, 0);
510                 break;
511         }
512
513         if (err)
514                 return err;
515
516         /* switch video in saa7111a */
517         if (saa7111a_call(mxb, video, s_routing, i, SAA7111_FMT_CCIR, 0))
518                 pr_err("VIDIOC_S_INPUT: could not address saa7111a\n");
519
520         mxb->cur_audinput = video_audio_connect[input];
521         /* switch the audio-source only if necessary */
522         if (0 == mxb->cur_mute)
523                 tea6420_route(mxb, mxb->cur_audinput);
524         if (mxb->cur_audinput == 0)
525                 mxb_update_audmode(mxb);
526
527         return 0;
528 }
529
530 static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *t)
531 {
532         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
533         struct mxb *mxb = (struct mxb *)dev->ext_priv;
534
535         if (t->index) {
536                 DEB_D("VIDIOC_G_TUNER: channel %d does not have a tuner attached\n",
537                       t->index);
538                 return -EINVAL;
539         }
540
541         DEB_EE("VIDIOC_G_TUNER: %d\n", t->index);
542
543         memset(t, 0, sizeof(*t));
544         strscpy(t->name, "TV Tuner", sizeof(t->name));
545         t->type = V4L2_TUNER_ANALOG_TV;
546         t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO |
547                         V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
548         t->audmode = mxb->cur_mode;
549         return call_all(dev, tuner, g_tuner, t);
550 }
551
552 static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *t)
553 {
554         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
555         struct mxb *mxb = (struct mxb *)dev->ext_priv;
556
557         if (t->index) {
558                 DEB_D("VIDIOC_S_TUNER: channel %d does not have a tuner attached\n",
559                       t->index);
560                 return -EINVAL;
561         }
562
563         mxb->cur_mode = t->audmode;
564         return call_all(dev, tuner, s_tuner, t);
565 }
566
567 static int vidioc_querystd(struct file *file, void *fh, v4l2_std_id *norm)
568 {
569         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
570
571         return call_all(dev, video, querystd, norm);
572 }
573
574 static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *f)
575 {
576         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
577         struct mxb *mxb = (struct mxb *)dev->ext_priv;
578
579         if (f->tuner)
580                 return -EINVAL;
581         *f = mxb->cur_freq;
582
583         DEB_EE("VIDIOC_G_FREQ: freq:0x%08x\n", mxb->cur_freq.frequency);
584         return 0;
585 }
586
587 static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *f)
588 {
589         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
590         struct mxb *mxb = (struct mxb *)dev->ext_priv;
591         struct saa7146_vv *vv = dev->vv_data;
592
593         if (f->tuner)
594                 return -EINVAL;
595
596         if (V4L2_TUNER_ANALOG_TV != f->type)
597                 return -EINVAL;
598
599         DEB_EE("VIDIOC_S_FREQUENCY: freq:0x%08x\n", mxb->cur_freq.frequency);
600
601         /* tune in desired frequency */
602         tuner_call(mxb, tuner, s_frequency, f);
603         /* let the tuner subdev clamp the frequency to the tuner range */
604         mxb->cur_freq = *f;
605         tuner_call(mxb, tuner, g_frequency, &mxb->cur_freq);
606         if (mxb->cur_audinput == 0)
607                 mxb_update_audmode(mxb);
608
609         if (mxb->cur_input)
610                 return 0;
611
612         /* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */
613         spin_lock(&dev->slock);
614         vv->vbi_fieldcount = 0;
615         spin_unlock(&dev->slock);
616
617         return 0;
618 }
619
620 static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a)
621 {
622         if (a->index >= MXB_AUDIOS)
623                 return -EINVAL;
624         *a = mxb_audios[a->index];
625         return 0;
626 }
627
628 static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a)
629 {
630         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
631         struct mxb *mxb = (struct mxb *)dev->ext_priv;
632
633         DEB_EE("VIDIOC_G_AUDIO\n");
634         *a = mxb_audios[mxb->cur_audinput];
635         return 0;
636 }
637
638 static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a)
639 {
640         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
641         struct mxb *mxb = (struct mxb *)dev->ext_priv;
642
643         DEB_D("VIDIOC_S_AUDIO %d\n", a->index);
644         if (a->index >= 32 ||
645             !(mxb_inputs[mxb->cur_input].audioset & (1 << a->index)))
646                 return -EINVAL;
647
648         if (mxb->cur_audinput != a->index) {
649                 mxb->cur_audinput = a->index;
650                 tea6420_route(mxb, a->index);
651                 if (mxb->cur_audinput == 0)
652                         mxb_update_audmode(mxb);
653         }
654         return 0;
655 }
656
657 #ifdef CONFIG_VIDEO_ADV_DEBUG
658 static int vidioc_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg)
659 {
660         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
661
662         if (reg->reg > pci_resource_len(dev->pci, 0) - 4)
663                 return -EINVAL;
664         reg->val = saa7146_read(dev, reg->reg);
665         reg->size = 4;
666         return 0;
667 }
668
669 static int vidioc_s_register(struct file *file, void *fh, const struct v4l2_dbg_register *reg)
670 {
671         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
672
673         if (reg->reg > pci_resource_len(dev->pci, 0) - 4)
674                 return -EINVAL;
675         saa7146_write(dev, reg->reg, reg->val);
676         return 0;
677 }
678 #endif
679
680 static struct saa7146_ext_vv vv_data;
681
682 /* this function only gets called when the probing was successful */
683 static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
684 {
685         struct mxb *mxb;
686         int ret;
687
688         DEB_EE("dev:%p\n", dev);
689
690         ret = saa7146_vv_init(dev, &vv_data);
691         if (ret) {
692                 ERR("Error in saa7146_vv_init()");
693                 return ret;
694         }
695
696         if (mxb_probe(dev)) {
697                 saa7146_vv_release(dev);
698                 return -1;
699         }
700         mxb = (struct mxb *)dev->ext_priv;
701
702         vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
703         vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
704         vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
705         vv_data.vid_ops.vidioc_querystd = vidioc_querystd;
706         vv_data.vid_ops.vidioc_g_tuner = vidioc_g_tuner;
707         vv_data.vid_ops.vidioc_s_tuner = vidioc_s_tuner;
708         vv_data.vid_ops.vidioc_g_frequency = vidioc_g_frequency;
709         vv_data.vid_ops.vidioc_s_frequency = vidioc_s_frequency;
710         vv_data.vid_ops.vidioc_enumaudio = vidioc_enumaudio;
711         vv_data.vid_ops.vidioc_g_audio = vidioc_g_audio;
712         vv_data.vid_ops.vidioc_s_audio = vidioc_s_audio;
713 #ifdef CONFIG_VIDEO_ADV_DEBUG
714         vv_data.vid_ops.vidioc_g_register = vidioc_g_register;
715         vv_data.vid_ops.vidioc_s_register = vidioc_s_register;
716 #endif
717         if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_VIDEO)) {
718                 ERR("cannot register capture v4l2 device. skipping.\n");
719                 saa7146_vv_release(dev);
720                 return -1;
721         }
722
723         /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/
724         if (MXB_BOARD_CAN_DO_VBI(dev)) {
725                 if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) {
726                         ERR("cannot register vbi v4l2 device. skipping.\n");
727                 }
728         }
729
730         pr_info("found Multimedia eXtension Board #%d\n", mxb_num);
731
732         mxb_num++;
733         mxb_init_done(dev);
734         return 0;
735 }
736
737 static int mxb_detach(struct saa7146_dev *dev)
738 {
739         struct mxb *mxb = (struct mxb *)dev->ext_priv;
740
741         DEB_EE("dev:%p\n", dev);
742
743         /* mute audio on tea6420s */
744         tea6420_route(mxb, 6);
745
746         saa7146_unregister_device(&mxb->video_dev,dev);
747         if (MXB_BOARD_CAN_DO_VBI(dev))
748                 saa7146_unregister_device(&mxb->vbi_dev, dev);
749         saa7146_vv_release(dev);
750
751         mxb_num--;
752
753         i2c_del_adapter(&mxb->i2c_adapter);
754         kfree(mxb);
755
756         return 0;
757 }
758
759 static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard)
760 {
761         struct mxb *mxb = (struct mxb *)dev->ext_priv;
762
763         if (V4L2_STD_PAL_I == standard->id) {
764                 v4l2_std_id std = V4L2_STD_PAL_I;
765
766                 DEB_D("VIDIOC_S_STD: setting mxb for PAL_I\n");
767                 /* These two gpio calls set the GPIO pins that control the tda9820 */
768                 saa7146_write(dev, GPIO_CTRL, 0x00404050);
769                 saa7111a_call(mxb, core, s_gpio, 0);
770                 saa7111a_call(mxb, video, s_std, std);
771                 if (mxb->cur_input == 0)
772                         tuner_call(mxb, video, s_std, std);
773         } else {
774                 v4l2_std_id std = V4L2_STD_PAL_BG;
775
776                 if (mxb->cur_input)
777                         std = standard->id;
778                 DEB_D("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM\n");
779                 /* These two gpio calls set the GPIO pins that control the tda9820 */
780                 saa7146_write(dev, GPIO_CTRL, 0x00404050);
781                 saa7111a_call(mxb, core, s_gpio, 1);
782                 saa7111a_call(mxb, video, s_std, std);
783                 if (mxb->cur_input == 0)
784                         tuner_call(mxb, video, s_std, std);
785         }
786         return 0;
787 }
788
789 static struct saa7146_standard standard[] = {
790         {
791                 .name   = "PAL-BG",     .id     = V4L2_STD_PAL_BG,
792                 .v_offset       = 0x17, .v_field        = 288,
793                 .h_offset       = 0x14, .h_pixels       = 680,
794                 .v_max_out      = 576,  .h_max_out      = 768,
795         }, {
796                 .name   = "PAL-I",      .id     = V4L2_STD_PAL_I,
797                 .v_offset       = 0x17, .v_field        = 288,
798                 .h_offset       = 0x14, .h_pixels       = 680,
799                 .v_max_out      = 576,  .h_max_out      = 768,
800         }, {
801                 .name   = "NTSC",       .id     = V4L2_STD_NTSC,
802                 .v_offset       = 0x16, .v_field        = 240,
803                 .h_offset       = 0x06, .h_pixels       = 708,
804                 .v_max_out      = 480,  .h_max_out      = 640,
805         }, {
806                 .name   = "SECAM",      .id     = V4L2_STD_SECAM,
807                 .v_offset       = 0x14, .v_field        = 288,
808                 .h_offset       = 0x14, .h_pixels       = 720,
809                 .v_max_out      = 576,  .h_max_out      = 768,
810         }
811 };
812
813 static struct saa7146_pci_extension_data mxb = {
814         .ext_priv = "Multimedia eXtension Board",
815         .ext = &extension,
816 };
817
818 static const struct pci_device_id pci_tbl[] = {
819         {
820                 .vendor    = PCI_VENDOR_ID_PHILIPS,
821                 .device    = PCI_DEVICE_ID_PHILIPS_SAA7146,
822                 .subvendor = 0x0000,
823                 .subdevice = 0x0000,
824                 .driver_data = (unsigned long)&mxb,
825         }, {
826                 .vendor = 0,
827         }
828 };
829
830 MODULE_DEVICE_TABLE(pci, pci_tbl);
831
832 static struct saa7146_ext_vv vv_data = {
833         .inputs         = MXB_INPUTS,
834         .capabilities   = V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_AUDIO,
835         .stds           = &standard[0],
836         .num_stds       = ARRAY_SIZE(standard),
837         .std_callback   = &std_callback,
838 };
839
840 static struct saa7146_extension extension = {
841         .name           = "Multimedia eXtension Board",
842         .flags          = SAA7146_USE_I2C_IRQ,
843
844         .pci_tbl        = &pci_tbl[0],
845         .module         = THIS_MODULE,
846
847         .attach         = mxb_attach,
848         .detach         = mxb_detach,
849
850         .irq_mask       = 0,
851         .irq_func       = NULL,
852 };
853
854 static int __init mxb_init_module(void)
855 {
856         if (saa7146_register_extension(&extension)) {
857                 DEB_S("failed to register extension\n");
858                 return -ENODEV;
859         }
860
861         return 0;
862 }
863
864 static void __exit mxb_cleanup_module(void)
865 {
866         saa7146_unregister_extension(&extension);
867 }
868
869 module_init(mxb_init_module);
870 module_exit(mxb_cleanup_module);
871
872 MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'");
873 MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
874 MODULE_LICENSE("GPL");