drivers/media/pci/bt8xx/bttv-cards.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3
   4     bttv-cards.c
   5
   6     this file has configuration information - card-specific stuff
   7     like the big tvcards array for the most part
   8
   9     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
  10                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  11     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  12
  13
  14 */
  15
  16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  17
  18 #include <linux/delay.h>
  19 #include <linux/module.h>
  20 #include <linux/kmod.h>
  21 #include <linux/init.h>
  22 #include <linux/pci.h>
  23 #include <linux/vmalloc.h>
  24 #include <linux/firmware.h>
  25 #include <net/checksum.h>
  26
  27 #include <asm/unaligned.h>
  28 #include <asm/io.h>
  29
  30 #include "bttvp.h"
  31 #include <media/v4l2-common.h>
  32 #include <media/i2c/tvaudio.h>
  33 #include "bttv-audio-hook.h"
  34
  35 /* fwd decl */
  36 static void boot_msp34xx(struct bttv *btv, int pin);
  37 static void hauppauge_eeprom(struct bttv *btv);
  38 static void avermedia_eeprom(struct bttv *btv);
  39 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  40 static void modtec_eeprom(struct bttv *btv);
  41 static void init_PXC200(struct bttv *btv);
  42 static void init_RTV24(struct bttv *btv);
  43 static void init_PCI8604PW(struct bttv *btv);
  44
  45 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  46 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  47 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  48 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  49 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  50
  51 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  52
  53 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  54 static void picolo_tetra_init(struct bttv *btv);
  55
  56 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  57 static void tibetCS16_init(struct bttv *btv);
  58
  59 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  60 static void kodicom4400r_init(struct bttv *btv);
  61
  62 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  63 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  64
  65 static void geovision_muxsel(struct bttv *btv, unsigned int input);
  66
  67 static void phytec_muxsel(struct bttv *btv, unsigned int input);
  68
  69 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
  70 static void gv800s_init(struct bttv *btv);
  71
  72 static void td3116_muxsel(struct bttv *btv, unsigned int input);
  73
  74 static int terratec_active_radio_upgrade(struct bttv *btv);
  75 static int tea575x_init(struct bttv *btv);
  76 static void identify_by_eeprom(struct bttv *btv,
  77                                unsigned char eeprom_data[256]);
  78 static int pvr_boot(struct bttv *btv);
  79
  80 /* config variables */
  81 static unsigned int triton1;
  82 static unsigned int vsfx;
  83 static unsigned int latency = UNSET;
  84
  85 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  86 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  87 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  88 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  89 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  90 static unsigned int audiodev[BTTV_MAX];
  91 static unsigned int saa6588[BTTV_MAX];
  92 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
  93 static unsigned int autoload = UNSET;
  94 static unsigned int gpiomask = UNSET;
  95 static unsigned int audioall = UNSET;
  96 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
  97
  98 /* insmod options */
  99 module_param(triton1,    int, 0444);
 100 module_param(vsfx,       int, 0444);
 101 module_param(latency,    int, 0444);
 102 module_param(gpiomask,   int, 0444);
 103 module_param(audioall,   int, 0444);
 104 module_param(autoload,   int, 0444);
 105
 106 module_param_array(card,     int, NULL, 0444);
 107 module_param_array(pll,      int, NULL, 0444);
 108 module_param_array(tuner,    int, NULL, 0444);
 109 module_param_array(svhs,     int, NULL, 0444);
 110 module_param_array(remote,   int, NULL, 0444);
 111 module_param_array(audiodev, int, NULL, 0444);
 112 module_param_array(audiomux, int, NULL, 0444);
 113
 114 MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]");
 115 MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]");
 116 MODULE_PARM_DESC(latency,"pci latency timer");
 117 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 118 MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");
 119 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 120 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
 121 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 122                 "\t\t-1 = no audio\n"
 123                 "\t\t 0 = autodetect (default)\n"
 124                 "\t\t 1 = msp3400\n"
 125                 "\t\t 2 = tda7432\n"
 126                 "\t\t 3 = tvaudio");
 127 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 128
 129 /*(DEBLOBBED)*/
 130
 131 /* I2C addresses list */
 132 #define I2C_ADDR_TDA7432        0x8a
 133 #define I2C_ADDR_MSP3400        0x80
 134 #define I2C_ADDR_MSP3400_ALT    0x88
 135
 136
 137 /* ----------------------------------------------------------------------- */
 138 /* list of card IDs for bt878+ cards                                       */
 139
 140 static struct CARD {
 141         unsigned id;
 142         int cardnr;
 143         char *name;
 144 } cards[] = {
 145         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 146         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 147         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 148         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 149         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 150         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 151         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 152         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 153         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 154
 155         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 156         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 157
 158         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 159         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 160         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 161         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 162         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 163         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 164         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 165         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 166         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 167
 168         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 169         /* some cards ship with byteswapped IDs ... */
 170         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 171         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 172         /* this seems to happen as well ... */
 173         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 174
 175         { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 176         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 177         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 178
 179         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 180         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 181         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 182         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 183         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 184         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 185         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 186
 187         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 188         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 189         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 190         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 191         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 192
 193         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 194         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 195         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 196         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 197
 198         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 199         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 200         /* clashes with FlyVideo
 201          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 202         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 203         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 204         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 205         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 206
 207         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 208         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 209         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 210         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 211         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 212
 213         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 214         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 215         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 216         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 217         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 218
 219         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 220         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 221         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 222         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 223
 224         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 225         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 226         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 227         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 228
 229         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 230         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 231         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 232         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 233         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 234         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 235         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 236         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 237         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 238         { 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
 239         { 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
 240         { 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
 241         { 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
 242         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 243         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 244         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 245         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 246         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 247         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 248         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 249         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 250         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 251         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 252         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 253         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 254         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 255         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 256         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 257         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 258         { 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 259         { 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 260         { 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 261         { 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 262
 263         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 264         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 265
 266         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 267         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 268         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 269         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 270         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 271         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 272
 273         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 274         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 275
 276         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 277         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 278         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 279         { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
 280         { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
 281         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 282         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 283         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 284         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 285         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 286
 287         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 288         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 289
 290         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 291         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 292         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 293         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 294
 295         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 296
 297         { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 298         { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 299
 300         /* likely broken, vendor id doesn't match the other magic views ...
 301          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 302
 303         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 304         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 305
 306         { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,  "Conceptronic CTVFMi v2"},
 307
 308         /* DVB cards (using pci function .1 for mpeg data xfer) */
 309         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 310         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 311         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 312         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 313         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 314         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 315         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 316         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 317         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 318         { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 319         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 320         { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 321         { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 322         { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
 323         { 0x18011000, BTTV_BOARD_ENLTV_FM_2,    "Encore ENL TV-FM-2" },
 324         { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
 325         { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 326         { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 327         { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 328
 329         { 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
 330         { 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
 331         { 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
 332         { 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
 333         { 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
 334         { 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
 335         { 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
 336         { 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
 337         { 0x3116f200, BTTV_BOARD_TVT_TD3116,    "Tongwei Video Technology TD-3116" },
 338         { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
 339         { 0, -1, NULL }
 340 };
 341
 342 /* ----------------------------------------------------------------------- */
 343 /* array with description for bt848 / bt878 tv/grabber cards               */
 344
 345 struct tvcard bttv_tvcards[] = {
 346         /* ---- card 0x00 ---------------------------------- */
 347         [BTTV_BOARD_UNKNOWN] = {
 348                 .name           = " *** UNKNOWN/GENERIC *** ",
 349                 .video_inputs   = 4,
 350                 .svhs           = 2,
 351                 .muxsel         = MUXSEL(2, 3, 1, 0),
 352                 .tuner_type     = UNSET,
 353                 .tuner_addr     = ADDR_UNSET,
 354         },
 355         [BTTV_BOARD_MIRO] = {
 356                 .name           = "MIRO PCTV",
 357                 .video_inputs   = 4,
 358                 /* .audio_inputs= 1, */
 359                 .svhs           = 2,
 360                 .gpiomask       = 15,
 361                 .muxsel         = MUXSEL(2, 3, 1, 1),
 362                 .gpiomux        = { 2, 0, 0, 0 },
 363                 .gpiomute       = 10,
 364                 .tuner_type     = UNSET,
 365                 .tuner_addr     = ADDR_UNSET,
 366         },
 367         [BTTV_BOARD_HAUPPAUGE] = {
 368                 .name           = "Hauppauge (bt848)",
 369                 .video_inputs   = 4,
 370                 /* .audio_inputs= 1, */
 371                 .svhs           = 2,
 372                 .gpiomask       = 7,
 373                 .muxsel         = MUXSEL(2, 3, 1, 1),
 374                 .gpiomux        = { 0, 1, 2, 3 },
 375                 .gpiomute       = 4,
 376                 .tuner_type     = UNSET,
 377                 .tuner_addr     = ADDR_UNSET,
 378         },
 379         [BTTV_BOARD_STB] = {
 380                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 381                 .video_inputs   = 3,
 382                 /* .audio_inputs= 1, */
 383                 .svhs           = 2,
 384                 .gpiomask       = 7,
 385                 .muxsel         = MUXSEL(2, 3, 1, 1),
 386                 .gpiomux        = { 4, 0, 2, 3 },
 387                 .gpiomute       = 1,
 388                 .no_msp34xx     = 1,
 389                 .tuner_type     = TUNER_PHILIPS_NTSC,
 390                 .tuner_addr     = ADDR_UNSET,
 391                 .pll            = PLL_28,
 392                 .has_radio      = 1,
 393         },
 394
 395         /* ---- card 0x04 ---------------------------------- */
 396         [BTTV_BOARD_INTEL] = {
 397                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 398                 .video_inputs   = 4,
 399                 /* .audio_inputs= 0, */
 400                 .svhs           = 2,
 401                 .gpiomask       = 0,
 402                 .muxsel         = MUXSEL(2, 3, 1, 1),
 403                 .gpiomux        = { 0 },
 404                 .tuner_type     = TUNER_ABSENT,
 405                 .tuner_addr     = ADDR_UNSET,
 406         },
 407         [BTTV_BOARD_DIAMOND] = {
 408                 .name           = "Diamond DTV2000",
 409                 .video_inputs   = 4,
 410                 /* .audio_inputs= 1, */
 411                 .svhs           = 2,
 412                 .gpiomask       = 3,
 413                 .muxsel         = MUXSEL(2, 3, 1, 0),
 414                 .gpiomux        = { 0, 1, 0, 1 },
 415                 .gpiomute       = 3,
 416                 .tuner_type     = UNSET,
 417                 .tuner_addr     = ADDR_UNSET,
 418         },
 419         [BTTV_BOARD_AVERMEDIA] = {
 420                 .name           = "AVerMedia TVPhone",
 421                 .video_inputs   = 3,
 422                 /* .audio_inputs= 1, */
 423                 .svhs           = 3,
 424                 .muxsel         = MUXSEL(2, 3, 1, 1),
 425                 .gpiomask       = 0x0f,
 426                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 427                 /*                0x04 for some cards ?? */
 428                 .tuner_type     = UNSET,
 429                 .tuner_addr     = ADDR_UNSET,
 430                 .audio_mode_gpio= avermedia_tvphone_audio,
 431                 .has_remote     = 1,
 432         },
 433         [BTTV_BOARD_MATRIX_VISION] = {
 434                 .name           = "MATRIX-Vision MV-Delta",
 435                 .video_inputs   = 5,
 436                 /* .audio_inputs= 1, */
 437                 .svhs           = 3,
 438                 .gpiomask       = 0,
 439                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 440                 .gpiomux        = { 0 },
 441                 .tuner_type     = TUNER_ABSENT,
 442                 .tuner_addr     = ADDR_UNSET,
 443         },
 444
 445         /* ---- card 0x08 ---------------------------------- */
 446         [BTTV_BOARD_FLYVIDEO] = {
 447                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 448                 .video_inputs   = 4,
 449                 /* .audio_inputs= 1, */
 450                 .svhs           = 2,
 451                 .gpiomask       = 0xc00,
 452                 .muxsel         = MUXSEL(2, 3, 1, 1),
 453                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 454                 .gpiomute       = 0xc00,
 455                 .pll            = PLL_28,
 456                 .tuner_type     = UNSET,
 457                 .tuner_addr     = ADDR_UNSET,
 458         },
 459         [BTTV_BOARD_TURBOTV] = {
 460                 .name           = "IMS/IXmicro TurboTV",
 461                 .video_inputs   = 3,
 462                 /* .audio_inputs= 1, */
 463                 .svhs           = 2,
 464                 .gpiomask       = 3,
 465                 .muxsel         = MUXSEL(2, 3, 1, 1),
 466                 .gpiomux        = { 1, 1, 2, 3 },
 467                 .pll            = PLL_28,
 468                 .tuner_type     = TUNER_TEMIC_PAL,
 469                 .tuner_addr     = ADDR_UNSET,
 470         },
 471         [BTTV_BOARD_HAUPPAUGE878] = {
 472                 .name           = "Hauppauge (bt878)",
 473                 .video_inputs   = 4,
 474                 /* .audio_inputs= 1, */
 475                 .svhs           = 2,
 476                 .gpiomask       = 0x0f, /* old: 7 */
 477                 .muxsel         = MUXSEL(2, 0, 1, 1),
 478                 .gpiomux        = { 0, 1, 2, 3 },
 479                 .gpiomute       = 4,
 480                 .pll            = PLL_28,
 481                 .tuner_type     = UNSET,
 482                 .tuner_addr     = ADDR_UNSET,
 483         },
 484         [BTTV_BOARD_MIROPRO] = {
 485                 .name           = "MIRO PCTV pro",
 486                 .video_inputs   = 3,
 487                 /* .audio_inputs= 1, */
 488                 .svhs           = 2,
 489                 .gpiomask       = 0x3014f,
 490                 .muxsel         = MUXSEL(2, 3, 1, 1),
 491                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
 492                 .gpiomute       = 10,
 493                 .tuner_type     = UNSET,
 494                 .tuner_addr     = ADDR_UNSET,
 495         },
 496
 497         /* ---- card 0x0c ---------------------------------- */
 498         [BTTV_BOARD_ADSTECH_TV] = {
 499                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 500                 .video_inputs   = 3,
 501                 /* .audio_inputs= 1, */
 502                 .svhs           = 2,
 503                 .gpiomask       = 15,
 504                 .muxsel         = MUXSEL(2, 3, 1, 1),
 505                 .gpiomux        = { 13, 14, 11, 7 },
 506                 .tuner_type     = UNSET,
 507                 .tuner_addr     = ADDR_UNSET,
 508         },
 509         [BTTV_BOARD_AVERMEDIA98] = {
 510                 .name           = "AVerMedia TVCapture 98",
 511                 .video_inputs   = 3,
 512                 /* .audio_inputs= 4, */
 513                 .svhs           = 2,
 514                 .gpiomask       = 15,
 515                 .muxsel         = MUXSEL(2, 3, 1, 1),
 516                 .gpiomux        = { 13, 14, 11, 7 },
 517                 .msp34xx_alt    = 1,
 518                 .pll            = PLL_28,
 519                 .tuner_type     = TUNER_PHILIPS_PAL,
 520                 .tuner_addr     = ADDR_UNSET,
 521                 .audio_mode_gpio= avermedia_tv_stereo_audio,
 522                 .no_gpioirq     = 1,
 523         },
 524         [BTTV_BOARD_VHX] = {
 525                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 526                 .video_inputs   = 3,
 527                 /* .audio_inputs= 1, */
 528                 .svhs           = 2,
 529                 .gpiomask       = 7,
 530                 .muxsel         = MUXSEL(2, 3, 1, 1),
 531                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 532                 .gpiomute       = 4,
 533                 .pll            = PLL_28,
 534                 .tuner_type     = UNSET,
 535                 .tuner_addr     = ADDR_UNSET,
 536         },
 537         [BTTV_BOARD_ZOLTRIX] = {
 538                 .name           = "Zoltrix TV-Max",
 539                 .video_inputs   = 3,
 540                 /* .audio_inputs= 1, */
 541                 .svhs           = 2,
 542                 .gpiomask       = 15,
 543                 .muxsel         = MUXSEL(2, 3, 1, 1),
 544                 .gpiomux        = { 0, 0, 1, 0 },
 545                 .gpiomute       = 10,
 546                 .tuner_type     = UNSET,
 547                 .tuner_addr     = ADDR_UNSET,
 548         },
 549
 550         /* ---- card 0x10 ---------------------------------- */
 551         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 552                 .name           = "Prolink Pixelview PlayTV (bt878)",
 553                 .video_inputs   = 3,
 554                 /* .audio_inputs= 1, */
 555                 .svhs           = 2,
 556                 .gpiomask       = 0x01fe00,
 557                 .muxsel         = MUXSEL(2, 3, 1, 1),
 558                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 559                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 560                 .gpiomute       = 0x002000,
 561                 .pll            = PLL_28,
 562                 .tuner_type     = UNSET,
 563                 .tuner_addr     = ADDR_UNSET,
 564         },
 565         [BTTV_BOARD_WINVIEW_601] = {
 566                 .name           = "Leadtek WinView 601",
 567                 .video_inputs   = 3,
 568                 /* .audio_inputs= 1, */
 569                 .svhs           = 2,
 570                 .gpiomask       = 0x8300f8,
 571                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 572                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 573                 .gpiomute       = 0xcfa007,
 574                 .tuner_type     = UNSET,
 575                 .tuner_addr     = ADDR_UNSET,
 576                 .volume_gpio    = winview_volume,
 577                 .has_radio      = 1,
 578         },
 579         [BTTV_BOARD_AVEC_INTERCAP] = {
 580                 .name           = "AVEC Intercapture",
 581                 .video_inputs   = 3,
 582                 /* .audio_inputs= 2, */
 583                 .svhs           = 2,
 584                 .gpiomask       = 0,
 585                 .muxsel         = MUXSEL(2, 3, 1, 1),
 586                 .gpiomux        = { 1, 0, 0, 0 },
 587                 .tuner_type     = UNSET,
 588                 .tuner_addr     = ADDR_UNSET,
 589         },
 590         [BTTV_BOARD_LIFE_FLYKIT] = {
 591                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 592                 .video_inputs   = 4,
 593                 /* .audio_inputs= 1, */
 594                 .svhs           = NO_SVHS,
 595                 .gpiomask       = 0x8dff00,
 596                 .muxsel         = MUXSEL(2, 3, 1, 1),
 597                 .gpiomux        = { 0 },
 598                 .no_msp34xx     = 1,
 599                 .tuner_type     = TUNER_ABSENT,
 600                 .tuner_addr     = ADDR_UNSET,
 601         },
 602
 603         /* ---- card 0x14 ---------------------------------- */
 604         [BTTV_BOARD_CEI_RAFFLES] = {
 605                 .name           = "CEI Raffles Card",
 606                 .video_inputs   = 3,
 607                 /* .audio_inputs= 3, */
 608                 .svhs           = 2,
 609                 .muxsel         = MUXSEL(2, 3, 1, 1),
 610                 .tuner_type     = UNSET,
 611                 .tuner_addr     = ADDR_UNSET,
 612         },
 613         [BTTV_BOARD_CONFERENCETV] = {
 614                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 615                 .video_inputs   = 4,
 616                 /* .audio_inputs= 2,  tuner, line in */
 617                 .svhs           = 2,
 618                 .gpiomask       = 0x1800,
 619                 .muxsel         = MUXSEL(2, 3, 1, 1),
 620                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 621                 .gpiomute       = 0x1800,
 622                 .pll            = PLL_28,
 623                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 624                 .tuner_addr     = ADDR_UNSET,
 625         },
 626         [BTTV_BOARD_PHOEBE_TVMAS] = {
 627                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 628                 .video_inputs   = 3,
 629                 /* .audio_inputs= 1, */
 630                 .svhs           = 2,
 631                 .gpiomask       = 0xc00,
 632                 .muxsel         = MUXSEL(2, 3, 1, 1),
 633                 .gpiomux        = { 0, 1, 0x800, 0x400 },
 634                 .gpiomute       = 0xc00,
 635                 .pll            = PLL_28,
 636                 .tuner_type     = UNSET,
 637                 .tuner_addr     = ADDR_UNSET,
 638         },
 639         [BTTV_BOARD_MODTEC_205] = {
 640                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 641                 .video_inputs   = 3,
 642                 /* .audio_inputs= 1, */
 643                 .svhs           = NO_SVHS,
 644                 .has_dig_in     = 1,
 645                 .gpiomask       = 7,
 646                 .muxsel         = MUXSEL(2, 3, 0), /* input 2 is digital */
 647                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
 648                 .gpiomux        = { 0, 0, 0, 0 },
 649                 .no_msp34xx     = 1,
 650                 .pll            = PLL_28,
 651                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 652                 .tuner_addr     = ADDR_UNSET,
 653         },
 654
 655         /* ---- card 0x18 ---------------------------------- */
 656         [BTTV_BOARD_MAGICTVIEW061] = {
 657                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 658                 .video_inputs   = 3,
 659                 /* .audio_inputs= 1, */
 660                 .svhs           = 2,
 661                 .gpiomask       = 0xe00,
 662                 .muxsel         = MUXSEL(2, 3, 1, 1),
 663                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 664                 .gpiomute       = 0xc00,
 665                 .pll            = PLL_28,
 666                 .tuner_type     = UNSET,
 667                 .tuner_addr     = ADDR_UNSET,
 668                 .has_remote     = 1,
 669                 .has_radio      = 1,  /* not every card has radio */
 670         },
 671         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 672                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 673                 .video_inputs   = 3,
 674                 /* .audio_inputs= 1, */
 675                 .svhs           = 2,
 676                 .gpiomask       = 0x1f0fff,
 677                 .muxsel         = MUXSEL(2, 3, 1, 1),
 678                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 679                 .gpiomute       = 0x40000,
 680                 .tuner_type     = TUNER_PHILIPS_PAL,
 681                 .tuner_addr     = ADDR_UNSET,
 682                 .audio_mode_gpio= terratv_audio,
 683         },
 684         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 685                 .name           = "Hauppauge WinCam newer (bt878)",
 686                 .video_inputs   = 4,
 687                 /* .audio_inputs= 1, */
 688                 .svhs           = 3,
 689                 .gpiomask       = 7,
 690                 .muxsel         = MUXSEL(2, 0, 1, 1),
 691                 .gpiomux        = { 0, 1, 2, 3 },
 692                 .gpiomute       = 4,
 693                 .tuner_type     = UNSET,
 694                 .tuner_addr     = ADDR_UNSET,
 695         },
 696         [BTTV_BOARD_MAXI] = {
 697                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 698                 .video_inputs   = 4,
 699                 /* .audio_inputs= 2, */
 700                 .svhs           = 2,
 701                 .gpiomask       = 0x1800,
 702                 .muxsel         = MUXSEL(2, 3, 1, 1),
 703                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 704                 .gpiomute       = 0x1800,
 705                 .pll            = PLL_28,
 706                 .tuner_type     = TUNER_PHILIPS_SECAM,
 707                 .tuner_addr     = ADDR_UNSET,
 708         },
 709
 710         /* ---- card 0x1c ---------------------------------- */
 711         [BTTV_BOARD_TERRATV] = {
 712                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 713                 .video_inputs   = 3,
 714                 /* .audio_inputs= 1, */
 715                 .svhs           = 2,
 716                 .gpiomask       = 0x1f0fff,
 717                 .muxsel         = MUXSEL(2, 3, 1, 1),
 718                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 719                 .gpiomute       = 0x40000,
 720                 .tuner_type     = TUNER_PHILIPS_PAL,
 721                 .tuner_addr     = ADDR_UNSET,
 722                 .audio_mode_gpio= terratv_audio,
 723                 /* GPIO wiring:
 724                 External 20 pin connector (for Active Radio Upgrade board)
 725                 gpio00: i2c-sda
 726                 gpio01: i2c-scl
 727                 gpio02: om5610-data
 728                 gpio03: om5610-clk
 729                 gpio04: om5610-wre
 730                 gpio05: om5610-stereo
 731                 gpio06: rds6588-davn
 732                 gpio07: Pin 7 n.c.
 733                 gpio08: nIOW
 734                 gpio09+10: nIOR, nSEL ?? (bt878)
 735                         gpio09: nIOR (bt848)
 736                         gpio10: nSEL (bt848)
 737                 Sound Routing:
 738                 gpio16: u2-A0 (1st 4052bt)
 739                 gpio17: u2-A1
 740                 gpio18: u2-nEN
 741                 gpio19: u4-A0 (2nd 4052)
 742                 gpio20: u4-A1
 743                         u4-nEN - GND
 744                 Btspy:
 745                         00000 : Cdrom (internal audio input)
 746                         10000 : ext. Video audio input
 747                         20000 : TV Mono
 748                         a0000 : TV Mono/2
 749                 1a0000 : TV Stereo
 750                         30000 : Radio
 751                         40000 : Mute
 752         */
 753
 754         },
 755         [BTTV_BOARD_PXC200] = {
 756                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 757                 .name           = "Imagenation PXC200",
 758                 .video_inputs   = 5,
 759                 /* .audio_inputs= 1, */
 760                 .svhs           = 1, /* was: 4 */
 761                 .gpiomask       = 0,
 762                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 763                 .gpiomux        = { 0 },
 764                 .tuner_type     = TUNER_ABSENT,
 765                 .tuner_addr     = ADDR_UNSET,
 766                 .muxsel_hook    = PXC200_muxsel,
 767
 768         },
 769         [BTTV_BOARD_FLYVIDEO_98] = {
 770                 .name           = "Lifeview FlyVideo 98 LR50",
 771                 .video_inputs   = 4,
 772                 /* .audio_inputs= 1, */
 773                 .svhs           = 2,
 774                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 775                 .muxsel         = MUXSEL(2, 3, 1, 1),
 776                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 777                 .gpiomute       = 0x1800,
 778                 .pll            = PLL_28,
 779                 .tuner_type     = UNSET,
 780                 .tuner_addr     = ADDR_UNSET,
 781         },
 782         [BTTV_BOARD_IPROTV] = {
 783                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 784                 .video_inputs   = 4,
 785                 /* .audio_inputs= 1, */
 786                 .svhs           = 3,
 787                 .gpiomask       = 1,
 788                 .muxsel         = MUXSEL(2, 3, 1, 1),
 789                 .gpiomux        = { 1, 0, 0, 0 },
 790                 .pll            = PLL_28,
 791                 .tuner_type     = TUNER_PHILIPS_PAL,
 792                 .tuner_addr     = ADDR_UNSET,
 793         },
 794
 795         /* ---- card 0x20 ---------------------------------- */
 796         [BTTV_BOARD_INTEL_C_S_PCI] = {
 797                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 798                 .video_inputs   = 4,
 799                 /* .audio_inputs= 0, */
 800                 .svhs           = 2,
 801                 .gpiomask       = 0,
 802                 .muxsel         = MUXSEL(2, 3, 1, 1),
 803                 .gpiomux        = { 0 },
 804                 .tuner_type     = TUNER_ABSENT,
 805                 .tuner_addr     = ADDR_UNSET,
 806         },
 807         [BTTV_BOARD_TERRATVALUE] = {
 808                 .name           = "Terratec TerraTValue Version Bt878",
 809                 .video_inputs   = 3,
 810                 /* .audio_inputs= 1, */
 811                 .svhs           = 2,
 812                 .gpiomask       = 0xffff00,
 813                 .muxsel         = MUXSEL(2, 3, 1, 1),
 814                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 815                 .gpiomute       = 0x900,
 816                 .pll            = PLL_28,
 817                 .tuner_type     = TUNER_PHILIPS_PAL,
 818                 .tuner_addr     = ADDR_UNSET,
 819         },
 820         [BTTV_BOARD_WINFAST2000] = {
 821                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 822                 .video_inputs   = 4,
 823                 /* .audio_inputs= 1, */
 824                 .svhs           = 2,
 825                 /* TV, CVid, SVid, CVid over SVid connector */
 826                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 827                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 828                 .gpiomask       = 0xb33000,
 829                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 830                 .gpiomute       = 0x800000,
 831                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 832                         gpio23 -- hef4052:nEnable (0x800000)
 833                         gpio12 -- hef4052:A1
 834                         gpio13 -- hef4052:A0
 835                 0x0000: external audio
 836                 0x1000: FM
 837                 0x2000: TV
 838                 0x3000: n.c.
 839                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 840                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 841                 */
 842                 .pll            = PLL_28,
 843                 .has_radio      = 1,
 844                 .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 845                 .tuner_addr     = ADDR_UNSET,
 846                 .audio_mode_gpio= winfast2000_audio,
 847                 .has_remote     = 1,
 848         },
 849         [BTTV_BOARD_CHRONOS_VS2] = {
 850                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 851                 .video_inputs   = 4,
 852                 /* .audio_inputs= 3, */
 853                 .svhs           = 2,
 854                 .gpiomask       = 0x1800,
 855                 .muxsel         = MUXSEL(2, 3, 1, 1),
 856                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 857                 .gpiomute       = 0x1800,
 858                 .pll            = PLL_28,
 859                 .tuner_type     = UNSET,
 860                 .tuner_addr     = ADDR_UNSET,
 861         },
 862
 863         /* ---- card 0x24 ---------------------------------- */
 864         [BTTV_BOARD_TYPHOON_TVIEW] = {
 865                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 866                 .video_inputs   = 4,
 867                 /* .audio_inputs= 3, */
 868                 .svhs           = 2,
 869                 .gpiomask       = 0x1800,
 870                 .muxsel         = MUXSEL(2, 3, 1, 1),
 871                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 872                 .gpiomute       = 0x1800,
 873                 .pll            = PLL_28,
 874                 .tuner_type     = UNSET,
 875                 .tuner_addr     = ADDR_UNSET,
 876                 .has_radio      = 1,
 877         },
 878         [BTTV_BOARD_PXELVWPLTVPRO] = {
 879                 .name           = "Prolink PixelView PlayTV pro",
 880                 .video_inputs   = 3,
 881                 /* .audio_inputs= 1, */
 882                 .svhs           = 2,
 883                 .gpiomask       = 0xff,
 884                 .muxsel         = MUXSEL(2, 3, 1, 1),
 885                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 886                 .gpiomute       = 0x29,
 887                 .no_msp34xx     = 1,
 888                 .pll            = PLL_28,
 889                 .tuner_type     = UNSET,
 890                 .tuner_addr     = ADDR_UNSET,
 891         },
 892         [BTTV_BOARD_MAGICTVIEW063] = {
 893                 .name           = "Askey CPH06X TView99",
 894                 .video_inputs   = 4,
 895                 /* .audio_inputs= 1, */
 896                 .svhs           = 2,
 897                 .gpiomask       = 0x551e00,
 898                 .muxsel         = MUXSEL(2, 3, 1, 0),
 899                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 900                 .gpiomute       = 0x551c00,
 901                 .pll            = PLL_28,
 902                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 903                 .tuner_addr     = ADDR_UNSET,
 904                 .has_remote     = 1,
 905         },
 906         [BTTV_BOARD_PINNACLE] = {
 907                 .name           = "Pinnacle PCTV Studio/Rave",
 908                 .video_inputs   = 3,
 909                 /* .audio_inputs= 1, */
 910                 .svhs           = 2,
 911                 .gpiomask       = 0x03000F,
 912                 .muxsel         = MUXSEL(2, 3, 1, 1),
 913                 .gpiomux        = { 2, 0xd0001, 0, 0 },
 914                 .gpiomute       = 1,
 915                 .pll            = PLL_28,
 916                 .tuner_type     = UNSET,
 917                 .tuner_addr     = ADDR_UNSET,
 918         },
 919
 920         /* ---- card 0x28 ---------------------------------- */
 921         [BTTV_BOARD_STB2] = {
 922                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 923                 .video_inputs   = 3,
 924                 /* .audio_inputs= 1, */
 925                 .svhs           = 2,
 926                 .gpiomask       = 7,
 927                 .muxsel         = MUXSEL(2, 3, 1, 1),
 928                 .gpiomux        = { 4, 0, 2, 3 },
 929                 .gpiomute       = 1,
 930                 .no_msp34xx     = 1,
 931                 .tuner_type     = TUNER_PHILIPS_NTSC,
 932                 .tuner_addr     = ADDR_UNSET,
 933                 .pll            = PLL_28,
 934                 .has_radio      = 1,
 935         },
 936         [BTTV_BOARD_AVPHONE98] = {
 937                 .name           = "AVerMedia TVPhone 98",
 938                 .video_inputs   = 3,
 939                 /* .audio_inputs= 4, */
 940                 .svhs           = 2,
 941                 .gpiomask       = 15,
 942                 .muxsel         = MUXSEL(2, 3, 1, 1),
 943                 .gpiomux        = { 13, 4, 11, 7 },
 944                 .pll            = PLL_28,
 945                 .tuner_type     = UNSET,
 946                 .tuner_addr     = ADDR_UNSET,
 947                 .has_radio      = 1,
 948                 .audio_mode_gpio= avermedia_tvphone_audio,
 949         },
 950         [BTTV_BOARD_PV951] = {
 951                 .name           = "ProVideo PV951", /* pic16c54 */
 952                 .video_inputs   = 3,
 953                 /* .audio_inputs= 1, */
 954                 .svhs           = 2,
 955                 .gpiomask       = 0,
 956                 .muxsel         = MUXSEL(2, 3, 1, 1),
 957                 .gpiomux        = { 0, 0, 0, 0},
 958                 .no_msp34xx     = 1,
 959                 .pll            = PLL_28,
 960                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 961                 .tuner_addr     = ADDR_UNSET,
 962         },
 963         [BTTV_BOARD_ONAIR_TV] = {
 964                 .name           = "Little OnAir TV",
 965                 .video_inputs   = 3,
 966                 /* .audio_inputs= 1, */
 967                 .svhs           = 2,
 968                 .gpiomask       = 0xe00b,
 969                 .muxsel         = MUXSEL(2, 3, 1, 1),
 970                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
 971                 .gpiomute       = 0xff3ffc,
 972                 .no_msp34xx     = 1,
 973                 .tuner_type     = UNSET,
 974                 .tuner_addr     = ADDR_UNSET,
 975         },
 976
 977         /* ---- card 0x2c ---------------------------------- */
 978         [BTTV_BOARD_SIGMA_TVII_FM] = {
 979                 .name           = "Sigma TVII-FM",
 980                 .video_inputs   = 2,
 981                 /* .audio_inputs= 1, */
 982                 .svhs           = NO_SVHS,
 983                 .gpiomask       = 3,
 984                 .muxsel         = MUXSEL(2, 3, 1, 1),
 985                 .gpiomux        = { 1, 1, 0, 2 },
 986                 .gpiomute       = 3,
 987                 .no_msp34xx     = 1,
 988                 .pll            = PLL_NONE,
 989                 .tuner_type     = UNSET,
 990                 .tuner_addr     = ADDR_UNSET,
 991         },
 992         [BTTV_BOARD_MATRIX_VISION2] = {
 993                 .name           = "MATRIX-Vision MV-Delta 2",
 994                 .video_inputs   = 5,
 995                 /* .audio_inputs= 1, */
 996                 .svhs           = 3,
 997                 .gpiomask       = 0,
 998                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 999                 .gpiomux        = { 0 },
1000                 .no_msp34xx     = 1,
1001                 .pll            = PLL_28,
1002                 .tuner_type     = TUNER_ABSENT,
1003                 .tuner_addr     = ADDR_UNSET,
1004         },
1005         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1006                 .name           = "Zoltrix Genie TV/FM",
1007                 .video_inputs   = 3,
1008                 /* .audio_inputs= 1, */
1009                 .svhs           = 2,
1010                 .gpiomask       = 0xbcf03f,
1011                 .muxsel         = MUXSEL(2, 3, 1, 1),
1012                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1013                 .gpiomute       = 0xbcb03f,
1014                 .no_msp34xx     = 1,
1015                 .pll            = PLL_28,
1016                 .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1017                 .tuner_addr     = ADDR_UNSET,
1018         },
1019         [BTTV_BOARD_TERRATVRADIO] = {
1020                 .name           = "Terratec TV/Radio+",
1021                 .video_inputs   = 3,
1022                 /* .audio_inputs= 1, */
1023                 .svhs           = 2,
1024                 .gpiomask       = 0x70000,
1025                 .muxsel         = MUXSEL(2, 3, 1, 1),
1026                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1027                 .gpiomute       = 0x40000,
1028                 .no_msp34xx     = 1,
1029                 .pll            = PLL_35,
1030                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1031                 .tuner_addr     = ADDR_UNSET,
1032                 .has_radio      = 1,
1033         },
1034
1035         /* ---- card 0x30 ---------------------------------- */
1036         [BTTV_BOARD_DYNALINK] = {
1037                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1038                 .video_inputs   = 3,
1039                 /* .audio_inputs= 1, */
1040                 .svhs           = 2,
1041                 .gpiomask       = 15,
1042                 .muxsel         = MUXSEL(2, 3, 1, 1),
1043                 .gpiomux        = {2,0,0,0 },
1044                 .gpiomute       = 1,
1045                 .pll            = PLL_28,
1046                 .tuner_type     = UNSET,
1047                 .tuner_addr     = ADDR_UNSET,
1048         },
1049         [BTTV_BOARD_GVBCTV3PCI] = {
1050                 .name           = "IODATA GV-BCTV3/PCI",
1051                 .video_inputs   = 3,
1052                 /* .audio_inputs= 1, */
1053                 .svhs           = 2,
1054                 .gpiomask       = 0x010f00,
1055                 .muxsel         = MUXSEL(2, 3, 0, 0),
1056                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1057                 .no_msp34xx     = 1,
1058                 .pll            = PLL_28,
1059                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1060                 .tuner_addr     = ADDR_UNSET,
1061                 .audio_mode_gpio= gvbctv3pci_audio,
1062         },
1063         [BTTV_BOARD_PXELVWPLTVPAK] = {
1064                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1065                 .video_inputs   = 5,
1066                 /* .audio_inputs= 1, */
1067                 .svhs           = 3,
1068                 .has_dig_in     = 1,
1069                 .gpiomask       = 0xAA0000,
1070                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1071                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1072                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1073                 .gpiomute       = 0xa8000,
1074                 .no_msp34xx     = 1,
1075                 .pll            = PLL_28,
1076                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1077                 .tuner_addr     = ADDR_UNSET,
1078                 .has_remote     = 1,
1079                 /* GPIO wiring: (different from Rev.4C !)
1080                         GPIO17: U4.A0 (first hef4052bt)
1081                         GPIO19: U4.A1
1082                         GPIO20: U5.A1 (second hef4052bt)
1083                         GPIO21: U4.nEN
1084                         GPIO22: BT832 Reset Line
1085                         GPIO23: A5,A0, U5,nEN
1086                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1087                 */
1088         },
1089         [BTTV_BOARD_EAGLE] = {
1090                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1091                 .video_inputs   = 4,
1092                 /* .audio_inputs= 1, */
1093                 .svhs           = 2,
1094                 .gpiomask       = 7,
1095                 .muxsel         = MUXSEL(2, 0, 1, 1),
1096                 .gpiomux        = { 0, 1, 2, 3 },
1097                 .gpiomute       = 4,
1098                 .pll            = PLL_28,
1099                 .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1100                 .tuner_addr     = ADDR_UNSET,
1101         },
1102
1103         /* ---- card 0x34 ---------------------------------- */
1104         [BTTV_BOARD_PINNACLEPRO] = {
1105                 /* David Härdeman <david@2gen.com> */
1106                 .name           = "Pinnacle PCTV Studio Pro",
1107                 .video_inputs   = 4,
1108                 /* .audio_inputs= 1, */
1109                 .svhs           = 3,
1110                 .gpiomask       = 0x03000F,
1111                 .muxsel         = MUXSEL(2, 3, 1, 1),
1112                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1113                 .gpiomute       = 10,
1114                                 /* sound path (5 sources):
1115                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1116                                         0= ext. Audio IN
1117                                         1= from MUX2
1118                                         2= Mono TV sound from Tuner
1119                                         3= not connected
1120                                 MUX2 (mask 0x30000):
1121                                         0,2,3= from MSP34xx
1122                                         1= FM stereo Radio from Tuner */
1123                 .pll            = PLL_28,
1124                 .tuner_type     = UNSET,
1125                 .tuner_addr     = ADDR_UNSET,
1126         },
1127         [BTTV_BOARD_TVIEW_RDS_FM] = {
1128                 /* Claas Langbehn <claas@bigfoot.com>,
1129                 Sven Grothklags <sven@upb.de> */
1130                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1131                 .video_inputs   = 4,
1132                 /* .audio_inputs= 3, */
1133                 .svhs           = 2,
1134                 .gpiomask       = 0x1c,
1135                 .muxsel         = MUXSEL(2, 3, 1, 1),
1136                 .gpiomux        = { 0, 0, 0x10, 8 },
1137                 .gpiomute       = 4,
1138                 .pll            = PLL_28,
1139                 .tuner_type     = TUNER_PHILIPS_PAL,
1140                 .tuner_addr     = ADDR_UNSET,
1141                 .has_radio      = 1,
1142         },
1143         [BTTV_BOARD_LIFETEC_9415] = {
1144                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1145                 in de.comp.os.unix.linux.hardware:
1146                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1147                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1148                         options tuner type=5 */
1149                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1150                 .video_inputs   = 4,
1151                 /* .audio_inputs= 1, */
1152                 .svhs           = 2,
1153                 .gpiomask       = 0x18e0,
1154                 .muxsel         = MUXSEL(2, 3, 1, 1),
1155                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1156                 .gpiomute       = 0x18e0,
1157                         /* For cards with tda9820/tda9821:
1158                                 0x0000: Tuner normal stereo
1159                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1160                                 0x0880: Tuner A2 stereo */
1161                 .pll            = PLL_28,
1162                 .tuner_type     = UNSET,
1163                 .tuner_addr     = ADDR_UNSET,
1164         },
1165         [BTTV_BOARD_BESTBUY_EASYTV] = {
1166                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1167                 old Easy TV BT848 version (model CPH031) */
1168                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1169                 .video_inputs   = 4,
1170                 /* .audio_inputs= 1, */
1171                 .svhs           = 2,
1172                 .gpiomask       = 0xF,
1173                 .muxsel         = MUXSEL(2, 3, 1, 0),
1174                 .gpiomux        = { 2, 0, 0, 0 },
1175                 .gpiomute       = 10,
1176                 .pll            = PLL_28,
1177                 .tuner_type     = TUNER_TEMIC_PAL,
1178                 .tuner_addr     = ADDR_UNSET,
1179         },
1180
1181         /* ---- card 0x38 ---------------------------------- */
1182         [BTTV_BOARD_FLYVIDEO_98FM] = {
1183                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1184                 .name           = "Lifeview FlyVideo 98FM LR50",
1185                 .video_inputs   = 4,
1186                 /* .audio_inputs= 3, */
1187                 .svhs           = 2,
1188                 .gpiomask       = 0x1800,
1189                 .muxsel         = MUXSEL(2, 3, 1, 1),
1190                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1191                 .gpiomute       = 0x1800,
1192                 .pll            = PLL_28,
1193                 .tuner_type     = TUNER_PHILIPS_PAL,
1194                 .tuner_addr     = ADDR_UNSET,
1195         },
1196                 /* This is the ultimate cheapo capture card
1197                 * just a BT848A on a small PCB!
1198                 * Steve Hosgood <steve@equiinet.com> */
1199         [BTTV_BOARD_GRANDTEC] = {
1200                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1201                 .video_inputs   = 2,
1202                 /* .audio_inputs= 0, */
1203                 .svhs           = 1,
1204                 .gpiomask       = 0,
1205                 .muxsel         = MUXSEL(3, 1),
1206                 .gpiomux        = { 0 },
1207                 .no_msp34xx     = 1,
1208                 .pll            = PLL_35,
1209                 .tuner_type     = TUNER_ABSENT,
1210                 .tuner_addr     = ADDR_UNSET,
1211         },
1212         [BTTV_BOARD_ASKEY_CPH060] = {
1213                 /* Daniel Herrington <daniel.herrington@home.com> */
1214                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1215                 .video_inputs   = 3,
1216                 /* .audio_inputs= 1, */
1217                 .svhs           = 2,
1218                 .gpiomask       = 0xe00,
1219                 .muxsel         = MUXSEL(2, 3, 1, 1),
1220                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1221                 .gpiomute       = 0x800,
1222                 .pll            = PLL_28,
1223                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1224                 .tuner_addr     = ADDR_UNSET,
1225         },
1226         [BTTV_BOARD_ASKEY_CPH03X] = {
1227                 /* Matti Mottus <mottus@physic.ut.ee> */
1228                 .name           = "Askey CPH03x TV Capturer",
1229                 .video_inputs   = 4,
1230                 /* .audio_inputs= 1, */
1231                 .svhs           = 2,
1232                 .gpiomask       = 0x03000F,
1233                 .muxsel         = MUXSEL(2, 3, 1, 0),
1234                 .gpiomux        = { 2, 0, 0, 0 },
1235                 .gpiomute       = 1,
1236                 .pll            = PLL_28,
1237                 .tuner_type     = TUNER_TEMIC_PAL,
1238                 .tuner_addr     = ADDR_UNSET,
1239                 .has_remote     = 1,
1240         },
1241
1242         /* ---- card 0x3c ---------------------------------- */
1243         [BTTV_BOARD_MM100PCTV] = {
1244                 /* Philip Blundell <philb@gnu.org> */
1245                 .name           = "Modular Technology MM100PCTV",
1246                 .video_inputs   = 2,
1247                 /* .audio_inputs= 2, */
1248                 .svhs           = NO_SVHS,
1249                 .gpiomask       = 11,
1250                 .muxsel         = MUXSEL(2, 3, 1, 1),
1251                 .gpiomux        = { 2, 0, 0, 1 },
1252                 .gpiomute       = 8,
1253                 .pll            = PLL_35,
1254                 .tuner_type     = TUNER_TEMIC_PAL,
1255                 .tuner_addr     = ADDR_UNSET,
1256         },
1257         [BTTV_BOARD_GMV1] = {
1258                 /* Adrian Cox <adrian@humboldt.co.uk */
1259                 .name           = "AG Electronics GMV1",
1260                 .video_inputs   = 2,
1261                 /* .audio_inputs= 0, */
1262                 .svhs           = 1,
1263                 .gpiomask       = 0xF,
1264                 .muxsel         = MUXSEL(2, 2),
1265                 .gpiomux        = { },
1266                 .no_msp34xx     = 1,
1267                 .pll            = PLL_28,
1268                 .tuner_type     = TUNER_ABSENT,
1269                 .tuner_addr     = ADDR_UNSET,
1270         },
1271         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1272                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1273                 new Easy TV BT878 version (model CPH061)
1274                 special thanks to Informatica Mieres for providing the card */
1275                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1276                 .video_inputs   = 3,
1277                 /* .audio_inputs= 2, */
1278                 .svhs           = 2,
1279                 .gpiomask       = 0xFF,
1280                 .muxsel         = MUXSEL(2, 3, 1, 0),
1281                 .gpiomux        = { 1, 0, 4, 4 },
1282                 .gpiomute       = 9,
1283                 .pll            = PLL_28,
1284                 .tuner_type     = TUNER_PHILIPS_PAL,
1285                 .tuner_addr     = ADDR_UNSET,
1286         },
1287         [BTTV_BOARD_ATI_TVWONDER] = {
1288                 /* Lukas Gebauer <geby@volny.cz> */
1289                 .name           = "ATI TV-Wonder",
1290                 .video_inputs   = 3,
1291                 /* .audio_inputs= 1, */
1292                 .svhs           = 2,
1293                 .gpiomask       = 0xf03f,
1294                 .muxsel         = MUXSEL(2, 3, 1, 0),
1295                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1296                 .gpiomute       = 0xbffe,
1297                 .pll            = PLL_28,
1298                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1299                 .tuner_addr     = ADDR_UNSET,
1300         },
1301
1302         /* ---- card 0x40 ---------------------------------- */
1303         [BTTV_BOARD_ATI_TVWONDERVE] = {
1304                 /* Lukas Gebauer <geby@volny.cz> */
1305                 .name           = "ATI TV-Wonder VE",
1306                 .video_inputs   = 2,
1307                 /* .audio_inputs= 1, */
1308                 .svhs           = NO_SVHS,
1309                 .gpiomask       = 1,
1310                 .muxsel         = MUXSEL(2, 3, 0, 1),
1311                 .gpiomux        = { 0, 0, 1, 0 },
1312                 .no_msp34xx     = 1,
1313                 .pll            = PLL_28,
1314                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1315                 .tuner_addr     = ADDR_UNSET,
1316         },
1317         [BTTV_BOARD_FLYVIDEO2000] = {
1318                 /* DeeJay <deejay@westel900.net (2000S) */
1319                 .name           = "Lifeview FlyVideo 2000S LR90",
1320                 .video_inputs   = 3,
1321                 /* .audio_inputs= 3, */
1322                 .svhs           = 2,
1323                 .gpiomask       = 0x18e0,
1324                 .muxsel         = MUXSEL(2, 3, 0, 1),
1325                                 /* Radio changed from 1e80 to 0x800 to make
1326                                 FlyVideo2000S in .hu happy (gm)*/
1327                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1328                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1329                 .gpiomute       = 0x1800,
1330                 .audio_mode_gpio= fv2000s_audio,
1331                 .no_msp34xx     = 1,
1332                 .pll            = PLL_28,
1333                 .tuner_type     = TUNER_PHILIPS_PAL,
1334                 .tuner_addr     = ADDR_UNSET,
1335         },
1336         [BTTV_BOARD_TERRATVALUER] = {
1337                 .name           = "Terratec TValueRadio",
1338                 .video_inputs   = 3,
1339                 /* .audio_inputs= 1, */
1340                 .svhs           = 2,
1341                 .gpiomask       = 0xffff00,
1342                 .muxsel         = MUXSEL(2, 3, 1, 1),
1343                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1344                 .gpiomute       = 0x900,
1345                 .pll            = PLL_28,
1346                 .tuner_type     = TUNER_PHILIPS_PAL,
1347                 .tuner_addr     = ADDR_UNSET,
1348                 .has_radio      = 1,
1349         },
1350         [BTTV_BOARD_GVBCTV4PCI] = {
1351                 /* TANAKA Kei <peg00625@nifty.com> */
1352                 .name           = "IODATA GV-BCTV4/PCI",
1353                 .video_inputs   = 3,
1354                 /* .audio_inputs= 1, */
1355                 .svhs           = 2,
1356                 .gpiomask       = 0x010f00,
1357                 .muxsel         = MUXSEL(2, 3, 0, 0),
1358                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1359                 .no_msp34xx     = 1,
1360                 .pll            = PLL_28,
1361                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1362                 .tuner_addr     = ADDR_UNSET,
1363                 .audio_mode_gpio= gvbctv3pci_audio,
1364         },
1365
1366         /* ---- card 0x44 ---------------------------------- */
1367         [BTTV_BOARD_VOODOOTV_FM] = {
1368                 .name           = "3Dfx VoodooTV FM (Euro)",
1369                 /* try "insmod msp3400 simple=0" if you have
1370                 * sound problems with this card. */
1371                 .video_inputs   = 4,
1372                 /* .audio_inputs= 1, */
1373                 .svhs           = NO_SVHS,
1374                 .gpiomask       = 0x4f8a00,
1375                 /* 0x100000: 1=MSP enabled (0=disable again)
1376                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1377                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1378                 .gpiomute       = 0x947fff,
1379                 /* tvtuner, radio,   external,internal, mute,  stereo
1380                 * tuner, Composite, SVid, Composite-on-Svid-adapter */
1381                 .muxsel         = MUXSEL(2, 3, 0, 1),
1382                 .tuner_type     = TUNER_MT2032,
1383                 .tuner_addr     = ADDR_UNSET,
1384                 .pll            = PLL_28,
1385                 .has_radio      = 1,
1386         },
1387         [BTTV_BOARD_VOODOOTV_200] = {
1388                 .name           = "VoodooTV 200 (USA)",
1389                 /* try "insmod msp3400 simple=0" if you have
1390                 * sound problems with this card. */
1391                 .video_inputs   = 4,
1392                 /* .audio_inputs= 1, */
1393                 .svhs           = NO_SVHS,
1394                 .gpiomask       = 0x4f8a00,
1395                 /* 0x100000: 1=MSP enabled (0=disable again)
1396                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1397                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1398                 .gpiomute       = 0x947fff,
1399                 /* tvtuner, radio,   external,internal, mute,  stereo
1400                 * tuner, Composite, SVid, Composite-on-Svid-adapter */
1401                 .muxsel         = MUXSEL(2, 3, 0, 1),
1402                 .tuner_type     = TUNER_MT2032,
1403                 .tuner_addr     = ADDR_UNSET,
1404                 .pll            = PLL_28,
1405                 .has_radio      = 1,
1406         },
1407         [BTTV_BOARD_AIMMS] = {
1408                 /* Philip Blundell <pb@nexus.co.uk> */
1409                 .name           = "Active Imaging AIMMS",
1410                 .video_inputs   = 1,
1411                 /* .audio_inputs= 0, */
1412                 .tuner_type     = TUNER_ABSENT,
1413                 .tuner_addr     = ADDR_UNSET,
1414                 .pll            = PLL_28,
1415                 .muxsel         = MUXSEL(2),
1416                 .gpiomask       = 0
1417         },
1418         [BTTV_BOARD_PV_BT878P_PLUS] = {
1419                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1420                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1421                 .video_inputs   = 3,
1422                 /* .audio_inputs= 4, */
1423                 .svhs           = 2,
1424                 .gpiomask       = 15,
1425                 .muxsel         = MUXSEL(2, 3, 1, 1),
1426                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1427                 .gpiomute       = 13,
1428                 .pll            = PLL_28,
1429                 .tuner_type     = TUNER_LG_PAL_I_FM,
1430                 .tuner_addr     = ADDR_UNSET,
1431                 .has_remote     = 1,
1432                 /* GPIO wiring:
1433                         GPIO0: U4.A0 (hef4052bt)
1434                         GPIO1: U4.A1
1435                         GPIO2: U4.A1 (second hef4052bt)
1436                         GPIO3: U4.nEN, U5.A0, A5.nEN
1437                         GPIO8-15: vrd866b ?
1438                 */
1439         },
1440         [BTTV_BOARD_FLYVIDEO98EZ] = {
1441                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1442                 .video_inputs   = 4,
1443                 /* .audio_inputs= 0, */
1444                 .svhs           = 2,
1445                 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1446                 .muxsel         = MUXSEL(2, 3, 1, 1),
1447                 .pll            = PLL_28,
1448                 .no_msp34xx     = 1,
1449                 .tuner_type     = TUNER_ABSENT,
1450                 .tuner_addr     = ADDR_UNSET,
1451         },
1452
1453         /* ---- card 0x48 ---------------------------------- */
1454         [BTTV_BOARD_PV_BT878P_9B] = {
1455                 /* Dariusz Kowalewski <darekk@automex.pl> */
1456                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1457                 .video_inputs   = 4,
1458                 /* .audio_inputs= 1, */
1459                 .svhs           = 2,
1460                 .gpiomask       = 0x3f,
1461                 .muxsel         = MUXSEL(2, 3, 1, 1),
1462                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1463                 .gpiomute       = 0x09,
1464                 .no_msp34xx     = 1,
1465                 .pll            = PLL_28,
1466                 .tuner_type     = TUNER_PHILIPS_PAL,
1467                 .tuner_addr     = ADDR_UNSET,
1468                 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1469                 .has_radio      = 1,  /* Note: not all cards have radio */
1470                 .has_remote     = 1,
1471                 /* GPIO wiring:
1472                         GPIO0: A0 hef4052
1473                         GPIO1: A1 hef4052
1474                         GPIO3: nEN hef4052
1475                         GPIO8-15: vrd866b
1476                         GPIO20,22,23: R30,R29,R28
1477                 */
1478         },
1479         [BTTV_BOARD_SENSORAY311_611] = {
1480                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1481                 /* you must jumper JP5 for the 311 card (PC/104+) to work */
1482                 .name           = "Sensoray 311/611",
1483                 .video_inputs   = 5,
1484                 /* .audio_inputs= 0, */
1485                 .svhs           = 4,
1486                 .gpiomask       = 0,
1487                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1488                 .gpiomux        = { 0 },
1489                 .tuner_type     = TUNER_ABSENT,
1490                 .tuner_addr     = ADDR_UNSET,
1491         },
1492         [BTTV_BOARD_RV605] = {
1493                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1494                 .name           = "RemoteVision MX (RV605)",
1495                 .video_inputs   = 16,
1496                 /* .audio_inputs= 0, */
1497                 .svhs           = NO_SVHS,
1498                 .gpiomask       = 0x00,
1499                 .gpiomask2      = 0x07ff,
1500                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1501                 .no_msp34xx     = 1,
1502                 .tuner_type     = TUNER_ABSENT,
1503                 .tuner_addr     = ADDR_UNSET,
1504                 .muxsel_hook    = rv605_muxsel,
1505         },
1506         [BTTV_BOARD_POWERCLR_MTV878] = {
1507                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1508                 .video_inputs   = 3,
1509                 /* .audio_inputs= 2, */
1510                 .svhs           = 2,
1511                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1512                 .muxsel         = MUXSEL(2, 1, 1),
1513                 .gpiomux        = { 0, 1, 2, 2 },
1514                 .gpiomute       = 4,
1515                 .tuner_type     = TUNER_PHILIPS_PAL,
1516                 .tuner_addr     = ADDR_UNSET,
1517                 .pll            = PLL_28,
1518                 .has_radio      = 1,
1519         },
1520
1521         /* ---- card 0x4c ---------------------------------- */
1522         [BTTV_BOARD_WINDVR] = {
1523                 /* Masaki Suzuki <masaki@btree.org> */
1524                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1525                 .video_inputs   = 3,
1526                 /* .audio_inputs= 1, */
1527                 .svhs           = 2,
1528                 .gpiomask       = 0x140007,
1529                 .muxsel         = MUXSEL(2, 3, 1, 1),
1530                 .gpiomux        = { 0, 1, 2, 3 },
1531                 .gpiomute       = 4,
1532                 .tuner_type     = TUNER_PHILIPS_NTSC,
1533                 .tuner_addr     = ADDR_UNSET,
1534                 .audio_mode_gpio= windvr_audio,
1535         },
1536         [BTTV_BOARD_GRANDTEC_MULTI] = {
1537                 .name           = "GrandTec Multi Capture Card (Bt878)",
1538                 .video_inputs   = 4,
1539                 /* .audio_inputs= 0, */
1540                 .svhs           = NO_SVHS,
1541                 .gpiomask       = 0,
1542                 .muxsel         = MUXSEL(2, 3, 1, 0),
1543                 .gpiomux        = { 0 },
1544                 .no_msp34xx     = 1,
1545                 .pll            = PLL_28,
1546                 .tuner_type     = TUNER_ABSENT,
1547                 .tuner_addr     = ADDR_UNSET,
1548         },
1549         [BTTV_BOARD_KWORLD] = {
1550                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1551                 .video_inputs   = 4,
1552                 /* .audio_inputs= 3, */
1553                 .svhs           = 2,
1554                 .gpiomask       = 7,
1555                 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1556                 .muxsel         = MUXSEL(2, 3, 1, 1),
1557                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1558                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1559                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1560                                                 * This card lacks PCI subsystem ID, sigh.
1561                                                 * gpiomux =1: lower volume, 2+3: mute
1562                                                 * btwincap uses 0x80000/0x80003
1563                                                 */
1564                 .gpiomute       = 4,
1565                 .no_msp34xx     = 1,
1566                 .pll            = PLL_28,
1567                 .tuner_type     = TUNER_PHILIPS_PAL,
1568                 .tuner_addr     = ADDR_UNSET,
1569                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1570                 radio signal strength indicators work fine. */
1571                 .has_radio      = 1,
1572                 /* GPIO Info:
1573                         GPIO0,1:   HEF4052 A0,A1
1574                         GPIO2:     HEF4052 nENABLE
1575                         GPIO3-7:   n.c.
1576                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1577                         GPIO14,15: ??
1578                         GPIO16-21: n.c.
1579                         GPIO22,23: ??
1580                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1581         },
1582         [BTTV_BOARD_DSP_TCVIDEO] = {
1583                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1584                 .name           = "DSP Design TCVIDEO",
1585                 .video_inputs   = 4,
1586                 .svhs           = NO_SVHS,
1587                 .muxsel         = MUXSEL(2, 3, 1, 0),
1588                 .pll            = PLL_28,
1589                 .tuner_type     = UNSET,
1590                 .tuner_addr     = ADDR_UNSET,
1591         },
1592
1593                 /* ---- card 0x50 ---------------------------------- */
1594         [BTTV_BOARD_HAUPPAUGEPVR] = {
1595                 .name           = "Hauppauge WinTV PVR",
1596                 .video_inputs   = 4,
1597                 /* .audio_inputs= 1, */
1598                 .svhs           = 2,
1599                 .muxsel         = MUXSEL(2, 0, 1, 1),
1600                 .pll            = PLL_28,
1601                 .tuner_type     = UNSET,
1602                 .tuner_addr     = ADDR_UNSET,
1603
1604                 .gpiomask       = 7,
1605                 .gpiomux        = {7},
1606         },
1607         [BTTV_BOARD_GVBCTV5PCI] = {
1608                 .name           = "IODATA GV-BCTV5/PCI",
1609                 .video_inputs   = 3,
1610                 /* .audio_inputs= 1, */
1611                 .svhs           = 2,
1612                 .gpiomask       = 0x0f0f80,
1613                 .muxsel         = MUXSEL(2, 3, 1, 0),
1614                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1615                 .gpiomute       = 0x020000,
1616                 .no_msp34xx     = 1,
1617                 .pll            = PLL_28,
1618                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1619                 .tuner_addr     = ADDR_UNSET,
1620                 .audio_mode_gpio= gvbctv5pci_audio,
1621                 .has_radio      = 1,
1622         },
1623         [BTTV_BOARD_OSPREY1x0] = {
1624                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1625                 .video_inputs   = 4,                  /* id-inputs-clock */
1626                 /* .audio_inputs= 0, */
1627                 .svhs           = 3,
1628                 .muxsel         = MUXSEL(3, 2, 0, 1),
1629                 .pll            = PLL_28,
1630                 .tuner_type     = TUNER_ABSENT,
1631                 .tuner_addr     = ADDR_UNSET,
1632                 .no_msp34xx     = 1,
1633                 .no_tda7432     = 1,
1634         },
1635         [BTTV_BOARD_OSPREY1x0_848] = {
1636                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1637                 .video_inputs   = 3,
1638                 /* .audio_inputs= 0, */
1639                 .svhs           = 2,
1640                 .muxsel         = MUXSEL(2, 3, 1),
1641                 .pll            = PLL_28,
1642                 .tuner_type     = TUNER_ABSENT,
1643                 .tuner_addr     = ADDR_UNSET,
1644                 .no_msp34xx     = 1,
1645                 .no_tda7432     = 1,
1646         },
1647
1648                 /* ---- card 0x54 ---------------------------------- */
1649         [BTTV_BOARD_OSPREY101_848] = {
1650                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1651                 .video_inputs   = 2,
1652                 /* .audio_inputs= 0, */
1653                 .svhs           = 1,
1654                 .muxsel         = MUXSEL(3, 1),
1655                 .pll            = PLL_28,
1656                 .tuner_type     = TUNER_ABSENT,
1657                 .tuner_addr     = ADDR_UNSET,
1658                 .no_msp34xx     = 1,
1659                 .no_tda7432     = 1,
1660         },
1661         [BTTV_BOARD_OSPREY1x1] = {
1662                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1663                 .video_inputs   = 1,
1664                 /* .audio_inputs= 0, */
1665                 .svhs           = NO_SVHS,
1666                 .muxsel         = MUXSEL(0),
1667                 .pll            = PLL_28,
1668                 .tuner_type     = TUNER_ABSENT,
1669                 .tuner_addr     = ADDR_UNSET,
1670                 .no_msp34xx     = 1,
1671                 .no_tda7432     = 1,
1672         },
1673         [BTTV_BOARD_OSPREY1x1_SVID] = {
1674                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1675                 .video_inputs   = 2,
1676                 /* .audio_inputs= 0, */
1677                 .svhs           = 1,
1678                 .muxsel         = MUXSEL(0, 1),
1679                 .pll            = PLL_28,
1680                 .tuner_type     = TUNER_ABSENT,
1681                 .tuner_addr     = ADDR_UNSET,
1682                 .no_msp34xx     = 1,
1683                 .no_tda7432     = 1,
1684         },
1685         [BTTV_BOARD_OSPREY2xx] = {
1686                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1687                 .video_inputs   = 1,
1688                 /* .audio_inputs= 1, */
1689                 .svhs           = NO_SVHS,
1690                 .muxsel         = MUXSEL(0),
1691                 .pll            = PLL_28,
1692                 .tuner_type     = TUNER_ABSENT,
1693                 .tuner_addr     = ADDR_UNSET,
1694                 .no_msp34xx     = 1,
1695                 .no_tda7432     = 1,
1696         },
1697
1698                 /* ---- card 0x58 ---------------------------------- */
1699         [BTTV_BOARD_OSPREY2x0_SVID] = {
1700                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1701                 .video_inputs   = 2,
1702                 /* .audio_inputs= 1, */
1703                 .svhs           = 1,
1704                 .muxsel         = MUXSEL(0, 1),
1705                 .pll            = PLL_28,
1706                 .tuner_type     = TUNER_ABSENT,
1707                 .tuner_addr     = ADDR_UNSET,
1708                 .no_msp34xx     = 1,
1709                 .no_tda7432     = 1,
1710         },
1711         [BTTV_BOARD_OSPREY2x0] = {
1712                 .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1713                 .video_inputs   = 2,
1714                 /* .audio_inputs= 1, */
1715                 .svhs           = 1,
1716                 .muxsel         = MUXSEL(2, 3),
1717                 .pll            = PLL_28,
1718                 .tuner_type     = TUNER_ABSENT,
1719                 .tuner_addr     = ADDR_UNSET,
1720                 .no_msp34xx     = 1,
1721                 .no_tda7432     = 1,
1722         },
1723         [BTTV_BOARD_OSPREY500] = {
1724                 .name           = "Osprey 500",   /* 500 */
1725                 .video_inputs   = 2,
1726                 /* .audio_inputs= 1, */
1727                 .svhs           = 1,
1728                 .muxsel         = MUXSEL(2, 3),
1729                 .pll            = PLL_28,
1730                 .tuner_type     = TUNER_ABSENT,
1731                 .tuner_addr     = ADDR_UNSET,
1732                 .no_msp34xx     = 1,
1733                 .no_tda7432     = 1,
1734         },
1735         [BTTV_BOARD_OSPREY540] = {
1736                 .name           = "Osprey 540",   /* 540 */
1737                 .video_inputs   = 4,
1738                 /* .audio_inputs= 1, */
1739                 .pll            = PLL_28,
1740                 .tuner_type     = TUNER_ABSENT,
1741                 .tuner_addr     = ADDR_UNSET,
1742                 .no_msp34xx     = 1,
1743                 .no_tda7432     = 1,
1744         },
1745
1746                 /* ---- card 0x5C ---------------------------------- */
1747         [BTTV_BOARD_OSPREY2000] = {
1748                 .name           = "Osprey 2000",  /* 2000 */
1749                 .video_inputs   = 2,
1750                 /* .audio_inputs= 1, */
1751                 .svhs           = 1,
1752                 .muxsel         = MUXSEL(2, 3),
1753                 .pll            = PLL_28,
1754                 .tuner_type     = TUNER_ABSENT,
1755                 .tuner_addr     = ADDR_UNSET,
1756                 .no_msp34xx     = 1,
1757                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1758         },
1759         [BTTV_BOARD_IDS_EAGLE] = {
1760                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1761                 .name           = "IDS Eagle",
1762                 .video_inputs   = 4,
1763                 /* .audio_inputs= 0, */
1764                 .tuner_type     = TUNER_ABSENT,
1765                 .tuner_addr     = ADDR_UNSET,
1766                 .svhs           = NO_SVHS,
1767                 .gpiomask       = 0,
1768                 .muxsel         = MUXSEL(2, 2, 2, 2),
1769                 .muxsel_hook    = eagle_muxsel,
1770                 .no_msp34xx     = 1,
1771                 .pll            = PLL_28,
1772         },
1773         [BTTV_BOARD_PINNACLESAT] = {
1774                 .name           = "Pinnacle PCTV Sat",
1775                 .video_inputs   = 2,
1776                 /* .audio_inputs= 0, */
1777                 .svhs           = 1,
1778                 .tuner_type     = TUNER_ABSENT,
1779                 .tuner_addr     = ADDR_UNSET,
1780                 .no_msp34xx     = 1,
1781                 .no_tda7432     = 1,
1782                 .muxsel         = MUXSEL(3, 1),
1783                 .pll            = PLL_28,
1784                 .no_gpioirq     = 1,
1785                 .has_dvb        = 1,
1786         },
1787         [BTTV_BOARD_FORMAC_PROTV] = {
1788                 .name           = "Formac ProTV II (bt878)",
1789                 .video_inputs   = 4,
1790                 /* .audio_inputs= 1, */
1791                 .svhs           = 3,
1792                 .gpiomask       = 2,
1793                 /* TV, Comp1, Composite over SVID con, SVID */
1794                 .muxsel         = MUXSEL(2, 3, 1, 1),
1795                 .gpiomux        = { 2, 2, 0, 0 },
1796                 .pll            = PLL_28,
1797                 .has_radio      = 1,
1798                 .tuner_type     = TUNER_PHILIPS_PAL,
1799                 .tuner_addr     = ADDR_UNSET,
1800         /* sound routing:
1801                 GPIO=0x00,0x01,0x03: mute (?)
1802                 0x02: both TV and radio (tuner: FM1216/I)
1803                 The card has onboard audio connectors labeled "cdrom" and "board",
1804                 not soldered here, though unknown wiring.
1805                 Card lacks: external audio in, pci subsystem id.
1806         */
1807         },
1808
1809                 /* ---- card 0x60 ---------------------------------- */
1810         [BTTV_BOARD_MACHTV] = {
1811                 .name           = "MachTV",
1812                 .video_inputs   = 3,
1813                 /* .audio_inputs= 1, */
1814                 .svhs           = NO_SVHS,
1815                 .gpiomask       = 7,
1816                 .muxsel         = MUXSEL(2, 3, 1, 1),
1817                 .gpiomux        = { 0, 1, 2, 3},
1818                 .gpiomute       = 4,
1819                 .tuner_type     = TUNER_PHILIPS_PAL,
1820                 .tuner_addr     = ADDR_UNSET,
1821                 .pll            = PLL_28,
1822         },
1823         [BTTV_BOARD_EURESYS_PICOLO] = {
1824                 .name           = "Euresys Picolo",
1825                 .video_inputs   = 3,
1826                 /* .audio_inputs= 0, */
1827                 .svhs           = 2,
1828                 .gpiomask       = 0,
1829                 .no_msp34xx     = 1,
1830                 .no_tda7432     = 1,
1831                 .muxsel         = MUXSEL(2, 0, 1),
1832                 .pll            = PLL_28,
1833                 .tuner_type     = TUNER_ABSENT,
1834                 .tuner_addr     = ADDR_UNSET,
1835         },
1836         [BTTV_BOARD_PV150] = {
1837                 /* Luc Van Hoeylandt <luc@e-magic.be> */
1838                 .name           = "ProVideo PV150", /* 0x4f */
1839                 .video_inputs   = 2,
1840                 /* .audio_inputs= 0, */
1841                 .svhs           = NO_SVHS,
1842                 .gpiomask       = 0,
1843                 .muxsel         = MUXSEL(2, 3),
1844                 .gpiomux        = { 0 },
1845                 .no_msp34xx     = 1,
1846                 .pll            = PLL_28,
1847                 .tuner_type     = TUNER_ABSENT,
1848                 .tuner_addr     = ADDR_UNSET,
1849         },
1850         [BTTV_BOARD_AD_TVK503] = {
1851                 /* Hiroshi Takekawa <sian@big.or.jp> */
1852                 /* This card lacks subsystem ID */
1853                 .name           = "AD-TVK503", /* 0x63 */
1854                 .video_inputs   = 4,
1855                 /* .audio_inputs= 1, */
1856                 .svhs           = 2,
1857                 .gpiomask       = 0x001e8007,
1858                 .muxsel         = MUXSEL(2, 3, 1, 0),
1859                 /*                  Tuner, Radio, external, internal, off,  on */
1860                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1861                 .gpiomute       = 0x0f,
1862                 .no_msp34xx     = 1,
1863                 .pll            = PLL_28,
1864                 .tuner_type     = TUNER_PHILIPS_NTSC,
1865                 .tuner_addr     = ADDR_UNSET,
1866                 .audio_mode_gpio= adtvk503_audio,
1867         },
1868
1869                 /* ---- card 0x64 ---------------------------------- */
1870         [BTTV_BOARD_HERCULES_SM_TV] = {
1871                 .name           = "Hercules Smart TV Stereo",
1872                 .video_inputs   = 4,
1873                 /* .audio_inputs= 1, */
1874                 .svhs           = 2,
1875                 .gpiomask       = 0x00,
1876                 .muxsel         = MUXSEL(2, 3, 1, 1),
1877                 .no_msp34xx     = 1,
1878                 .pll            = PLL_28,
1879                 .tuner_type     = TUNER_PHILIPS_PAL,
1880                 .tuner_addr     = ADDR_UNSET,
1881                 /* Notes:
1882                 - card lacks subsystem ID
1883                 - stereo variant w/ daughter board with tda9874a @0xb0
1884                 - Audio Routing:
1885                         always from tda9874 independent of GPIO (?)
1886                         external line in: unknown
1887                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1888                         hef4053 (instead 4052) for unknown function
1889                 */
1890         },
1891         [BTTV_BOARD_PACETV] = {
1892                 .name           = "Pace TV & Radio Card",
1893                 .video_inputs   = 4,
1894                 /* .audio_inputs= 1, */
1895                 .svhs           = 2,
1896                 /* Tuner, CVid, SVid, CVid over SVid connector */
1897                 .muxsel         = MUXSEL(2, 3, 1, 1),
1898                 .gpiomask       = 0,
1899                 .no_tda7432     = 1,
1900                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1901                 .tuner_addr     = ADDR_UNSET,
1902                 .has_radio      = 1,
1903                 .pll            = PLL_28,
1904                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1905                 only internal line out: (4pin header) RGGL
1906                 Radio must be decoded by msp3410d (not routed through)*/
1907                 /*
1908                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1909                 */
1910         },
1911         [BTTV_BOARD_IVC200] = {
1912                 /* Chris Willing <chris@vislab.usyd.edu.au> */
1913                 .name           = "IVC-200",
1914                 .video_inputs   = 1,
1915                 /* .audio_inputs= 0, */
1916                 .tuner_type     = TUNER_ABSENT,
1917                 .tuner_addr     = ADDR_UNSET,
1918                 .svhs           = NO_SVHS,
1919                 .gpiomask       = 0xdf,
1920                 .muxsel         = MUXSEL(2),
1921                 .pll            = PLL_28,
1922         },
1923         [BTTV_BOARD_IVCE8784] = {
1924                 .name           = "IVCE-8784",
1925                 .video_inputs   = 1,
1926                 /* .audio_inputs= 0, */
1927                 .tuner_type     = TUNER_ABSENT,
1928                 .tuner_addr     = ADDR_UNSET,
1929                 .svhs           = NO_SVHS,
1930                 .gpiomask       = 0xdf,
1931                 .muxsel         = MUXSEL(2),
1932                 .pll            = PLL_28,
1933         },
1934         [BTTV_BOARD_XGUARD] = {
1935                 .name           = "Grand X-Guard / Trust 814PCI",
1936                 .video_inputs   = 16,
1937                 /* .audio_inputs= 0, */
1938                 .svhs           = NO_SVHS,
1939                 .tuner_type     = TUNER_ABSENT,
1940                 .tuner_addr     = ADDR_UNSET,
1941                 .gpiomask2      = 0xff,
1942                 .muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1943                 .muxsel_hook    = xguard_muxsel,
1944                 .no_msp34xx     = 1,
1945                 .no_tda7432     = 1,
1946                 .pll            = PLL_28,
1947         },
1948
1949                 /* ---- card 0x68 ---------------------------------- */
1950         [BTTV_BOARD_NEBULA_DIGITV] = {
1951                 .name           = "Nebula Electronics DigiTV",
1952                 .video_inputs   = 1,
1953                 .svhs           = NO_SVHS,
1954                 .muxsel         = MUXSEL(2, 3, 1, 0),
1955                 .no_msp34xx     = 1,
1956                 .no_tda7432     = 1,
1957                 .pll            = PLL_28,
1958                 .tuner_type     = TUNER_ABSENT,
1959                 .tuner_addr     = ADDR_UNSET,
1960                 .has_dvb        = 1,
1961                 .has_remote     = 1,
1962                 .gpiomask       = 0x1b,
1963                 .no_gpioirq     = 1,
1964         },
1965         [BTTV_BOARD_PV143] = {
1966                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1967                 .name           = "ProVideo PV143",
1968                 .video_inputs   = 4,
1969                 /* .audio_inputs= 0, */
1970                 .svhs           = NO_SVHS,
1971                 .gpiomask       = 0,
1972                 .muxsel         = MUXSEL(2, 3, 1, 0),
1973                 .gpiomux        = { 0 },
1974                 .no_msp34xx     = 1,
1975                 .pll            = PLL_28,
1976                 .tuner_type     = TUNER_ABSENT,
1977                 .tuner_addr     = ADDR_UNSET,
1978         },
1979         [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
1980                 /* M.Klahr@phytec.de */
1981                 .name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
1982                 .video_inputs   = 4,
1983                 /* .audio_inputs= 0, */
1984                 .svhs           = 3,
1985                 .gpiomask       = 0x00,
1986                 .muxsel         = MUXSEL(2, 3, 1, 0),
1987                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
1988                 .pll            = PLL_28,
1989                 .tuner_type     = TUNER_ABSENT,
1990                 .tuner_addr     = ADDR_UNSET,
1991         },
1992         [BTTV_BOARD_VD009X1_VD011_COMBI] = {
1993                 .name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
1994                 .video_inputs   = 4,
1995                 /* .audio_inputs= 0, */
1996                 .svhs           = 3,
1997                 .gpiomask       = 0x00,
1998                 .muxsel         = MUXSEL(2, 3, 1, 1),
1999                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2000                 .pll            = PLL_28,
2001                 .tuner_type     = TUNER_ABSENT,
2002                 .tuner_addr     = ADDR_UNSET,
2003         },
2004
2005                 /* ---- card 0x6c ---------------------------------- */
2006         [BTTV_BOARD_VD009_MINIDIN] = {
2007                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2008                 .video_inputs   = 10,
2009                 /* .audio_inputs= 0, */
2010                 .svhs           = 9,
2011                 .gpiomask       = 0x00,
2012                 .gpiomask2      = 0x03, /* used for external video mux */
2013                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2014                 .muxsel_hook    = phytec_muxsel,
2015                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2016                 .pll            = PLL_28,
2017                 .tuner_type     = TUNER_ABSENT,
2018                 .tuner_addr     = ADDR_UNSET,
2019         },
2020         [BTTV_BOARD_VD009_COMBI] = {
2021                 .name           = "PHYTEC VD-009 Combi (bt878)",
2022                 .video_inputs   = 10,
2023                 /* .audio_inputs= 0, */
2024                 .svhs           = 9,
2025                 .gpiomask       = 0x00,
2026                 .gpiomask2      = 0x03, /* used for external video mux */
2027                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2028                 .muxsel_hook    = phytec_muxsel,
2029                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2030                 .pll            = PLL_28,
2031                 .tuner_type     = TUNER_ABSENT,
2032                 .tuner_addr     = ADDR_UNSET,
2033         },
2034         [BTTV_BOARD_IVC100] = {
2035                 .name           = "IVC-100",
2036                 .video_inputs   = 4,
2037                 /* .audio_inputs= 0, */
2038                 .tuner_type     = TUNER_ABSENT,
2039                 .tuner_addr     = ADDR_UNSET,
2040                 .svhs           = NO_SVHS,
2041                 .gpiomask       = 0xdf,
2042                 .muxsel         = MUXSEL(2, 3, 1, 0),
2043                 .pll            = PLL_28,
2044         },
2045         [BTTV_BOARD_IVC120] = {
2046                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2047                 .name           = "IVC-120G",
2048                 .video_inputs   = 16,
2049                 /* .audio_inputs= 0, */
2050                 .tuner_type     = TUNER_ABSENT,
2051                 .tuner_addr     = ADDR_UNSET,
2052                 .svhs           = NO_SVHS,   /* card has no svhs */
2053                 .no_msp34xx     = 1,
2054                 .no_tda7432     = 1,
2055                 .gpiomask       = 0x00,
2056                 .muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2057                 .muxsel_hook    = ivc120_muxsel,
2058                 .pll            = PLL_28,
2059         },
2060
2061                 /* ---- card 0x70 ---------------------------------- */
2062         [BTTV_BOARD_PC_HDTV] = {
2063                 .name           = "pcHDTV HD-2000 TV",
2064                 .video_inputs   = 4,
2065                 /* .audio_inputs= 1, */
2066                 .svhs           = 2,
2067                 .muxsel         = MUXSEL(2, 3, 1, 0),
2068                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2069                 .tuner_addr     = ADDR_UNSET,
2070                 .has_dvb        = 1,
2071         },
2072         [BTTV_BOARD_TWINHAN_DST] = {
2073                 .name           = "Twinhan DST + clones",
2074                 .no_msp34xx     = 1,
2075                 .no_tda7432     = 1,
2076                 .tuner_type     = TUNER_ABSENT,
2077                 .tuner_addr     = ADDR_UNSET,
2078                 .no_video       = 1,
2079                 .has_dvb        = 1,
2080         },
2081         [BTTV_BOARD_WINFASTVC100] = {
2082                 .name           = "Winfast VC100",
2083                 .video_inputs   = 3,
2084                 /* .audio_inputs= 0, */
2085                 .svhs           = 1,
2086                 /* Vid In, SVid In, Vid over SVid in connector */
2087                 .muxsel         = MUXSEL(3, 1, 1, 3),
2088                 .no_msp34xx     = 1,
2089                 .no_tda7432     = 1,
2090                 .tuner_type     = TUNER_ABSENT,
2091                 .tuner_addr     = ADDR_UNSET,
2092                 .pll            = PLL_28,
2093         },
2094         [BTTV_BOARD_TEV560] = {
2095                 .name           = "Teppro TEV-560/InterVision IV-560",
2096                 .video_inputs   = 3,
2097                 /* .audio_inputs= 1, */
2098                 .svhs           = 2,
2099                 .gpiomask       = 3,
2100                 .muxsel         = MUXSEL(2, 3, 1, 1),
2101                 .gpiomux        = { 1, 1, 1, 1 },
2102                 .tuner_type     = TUNER_PHILIPS_PAL,
2103                 .tuner_addr     = ADDR_UNSET,
2104                 .pll            = PLL_35,
2105         },
2106
2107                 /* ---- card 0x74 ---------------------------------- */
2108         [BTTV_BOARD_SIMUS_GVC1100] = {
2109                 .name           = "SIMUS GVC1100",
2110                 .video_inputs   = 4,
2111                 /* .audio_inputs= 0, */
2112                 .svhs           = NO_SVHS,
2113                 .tuner_type     = TUNER_ABSENT,
2114                 .tuner_addr     = ADDR_UNSET,
2115                 .pll            = PLL_28,
2116                 .muxsel         = MUXSEL(2, 2, 2, 2),
2117                 .gpiomask       = 0x3F,
2118                 .muxsel_hook    = gvc1100_muxsel,
2119         },
2120         [BTTV_BOARD_NGSTV_PLUS] = {
2121                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2122                 .name           = "NGS NGSTV+",
2123                 .video_inputs   = 3,
2124                 .svhs           = 2,
2125                 .gpiomask       = 0x008007,
2126                 .muxsel         = MUXSEL(2, 3, 0, 0),
2127                 .gpiomux        = { 0, 0, 0, 0 },
2128                 .gpiomute       = 0x000003,
2129                 .pll            = PLL_28,
2130                 .tuner_type     = TUNER_PHILIPS_PAL,
2131                 .tuner_addr     = ADDR_UNSET,
2132                 .has_remote     = 1,
2133         },
2134         [BTTV_BOARD_LMLBT4] = {
2135                 /* http://linuxmedialabs.com */
2136                 .name           = "LMLBT4",
2137                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2138                 /* .audio_inputs= 0, */
2139                 .svhs           = NO_SVHS,
2140                 .muxsel         = MUXSEL(2, 3, 1, 0),
2141                 .no_msp34xx     = 1,
2142                 .no_tda7432     = 1,
2143                 .tuner_type     = TUNER_ABSENT,
2144                 .tuner_addr     = ADDR_UNSET,
2145         },
2146         [BTTV_BOARD_TEKRAM_M205] = {
2147                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2148                 .name           = "Tekram M205 PRO",
2149                 .video_inputs   = 3,
2150                 /* .audio_inputs= 1, */
2151                 .tuner_type     = TUNER_PHILIPS_PAL,
2152                 .tuner_addr     = ADDR_UNSET,
2153                 .svhs           = 2,
2154                 .gpiomask       = 0x68,
2155                 .muxsel         = MUXSEL(2, 3, 1),
2156                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2157                 .pll            = PLL_28,
2158         },
2159
2160                 /* ---- card 0x78 ---------------------------------- */
2161         [BTTV_BOARD_CONTVFMI] = {
2162                 /* Javier Cendan Ares <jcendan@lycos.es> */
2163                 /* bt878 TV + FM without subsystem ID */
2164                 .name           = "Conceptronic CONTVFMi",
2165                 .video_inputs   = 3,
2166                 /* .audio_inputs= 1, */
2167                 .svhs           = 2,
2168                 .gpiomask       = 0x008007,
2169                 .muxsel         = MUXSEL(2, 3, 1, 1),
2170                 .gpiomux        = { 0, 1, 2, 2 },
2171                 .gpiomute       = 3,
2172                 .pll            = PLL_28,
2173                 .tuner_type     = TUNER_PHILIPS_PAL,
2174                 .tuner_addr     = ADDR_UNSET,
2175                 .has_remote     = 1,
2176                 .has_radio      = 1,
2177         },
2178         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2179                 /*Eric DEBIEF <debief@telemsa.com>*/
2180                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2181                 /*adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration*/
2182                 /*structure and #define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 in bttv.h*/
2183                 .name           = "Euresys Picolo Tetra",
2184                 .video_inputs   = 4,
2185                 /* .audio_inputs= 0, */
2186                 .svhs           = NO_SVHS,
2187                 .gpiomask       = 0,
2188                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2189                 .no_msp34xx     = 1,
2190                 .no_tda7432     = 1,
2191                 /*878A input is always MUX0, see above.*/
2192                 .muxsel         = MUXSEL(2, 2, 2, 2),
2193                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2194                 .pll            = PLL_28,
2195                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2196                 .tuner_type     = TUNER_ABSENT,
2197                 .tuner_addr     = ADDR_UNSET,
2198         },
2199         [BTTV_BOARD_SPIRIT_TV] = {
2200                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2201                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2202                 .name           = "Spirit TV Tuner",
2203                 .video_inputs   = 3,
2204                 /* .audio_inputs= 1, */
2205                 .svhs           = 2,
2206                 .gpiomask       = 0x0000000f,
2207                 .muxsel         = MUXSEL(2, 1, 1),
2208                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2209                 .tuner_type     = TUNER_TEMIC_PAL,
2210                 .tuner_addr     = ADDR_UNSET,
2211                 .no_msp34xx     = 1,
2212         },
2213         [BTTV_BOARD_AVDVBT_771] = {
2214                 /* Wolfram Joost <wojo@frokaschwei.de> */
2215                 .name           = "AVerMedia AVerTV DVB-T 771",
2216                 .video_inputs   = 2,
2217                 .svhs           = 1,
2218                 .tuner_type     = TUNER_ABSENT,
2219                 .tuner_addr     = ADDR_UNSET,
2220                 .muxsel         = MUXSEL(3, 3),
2221                 .no_msp34xx     = 1,
2222                 .no_tda7432     = 1,
2223                 .pll            = PLL_28,
2224                 .has_dvb        = 1,
2225                 .no_gpioirq     = 1,
2226                 .has_remote     = 1,
2227         },
2228                 /* ---- card 0x7c ---------------------------------- */
2229         [BTTV_BOARD_AVDVBT_761] = {
2230                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2231                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2232                 .name           = "AverMedia AverTV DVB-T 761",
2233                 .video_inputs   = 2,
2234                 .svhs           = 1,
2235                 .muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2236                 .no_msp34xx     = 1,
2237                 .no_tda7432     = 1,
2238                 .pll            = PLL_28,
2239                 .tuner_type     = TUNER_ABSENT,
2240                 .tuner_addr     = ADDR_UNSET,
2241                 .has_dvb        = 1,
2242                 .no_gpioirq     = 1,
2243                 .has_remote     = 1,
2244         },
2245         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2246                 /* andre.schwarz@matrix-vision.de */
2247                 .name           = "MATRIX Vision Sigma-SQ",
2248                 .video_inputs   = 16,
2249                 /* .audio_inputs= 0, */
2250                 .svhs           = NO_SVHS,
2251                 .gpiomask       = 0x0,
2252                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2253                 .muxsel_hook    = sigmaSQ_muxsel,
2254                 .gpiomux        = { 0 },
2255                 .no_msp34xx     = 1,
2256                 .pll            = PLL_28,
2257                 .tuner_type     = TUNER_ABSENT,
2258                 .tuner_addr     = ADDR_UNSET,
2259         },
2260         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2261                 /* andre.schwarz@matrix-vision.de */
2262                 .name           = "MATRIX Vision Sigma-SLC",
2263                 .video_inputs   = 4,
2264                 /* .audio_inputs= 0, */
2265                 .svhs           = NO_SVHS,
2266                 .gpiomask       = 0x0,
2267                 .muxsel         = MUXSEL(2, 2, 2, 2),
2268                 .muxsel_hook    = sigmaSLC_muxsel,
2269                 .gpiomux        = { 0 },
2270                 .no_msp34xx     = 1,
2271                 .pll            = PLL_28,
2272                 .tuner_type     = TUNER_ABSENT,
2273                 .tuner_addr     = ADDR_UNSET,
2274         },
2275                 /* BTTV_BOARD_APAC_VIEWCOMP */
2276         [BTTV_BOARD_APAC_VIEWCOMP] = {
2277                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2278                 /* bt878 TV + FM 0x00000000 subsystem ID */
2279                 .name           = "APAC Viewcomp 878(AMAX)",
2280                 .video_inputs   = 2,
2281                 /* .audio_inputs= 1, */
2282                 .svhs           = NO_SVHS,
2283                 .gpiomask       = 0xFF,
2284                 .muxsel         = MUXSEL(2, 3, 1, 1),
2285                 .gpiomux        = { 2, 0, 0, 0 },
2286                 .gpiomute       = 10,
2287                 .pll            = PLL_28,
2288                 .tuner_type     = TUNER_PHILIPS_PAL,
2289                 .tuner_addr     = ADDR_UNSET,
2290                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2291                 .has_radio      = 1,   /* not every card has radio */
2292         },
2293
2294                 /* ---- card 0x80 ---------------------------------- */
2295         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2296                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2297                 .name           = "DViCO FusionHDTV DVB-T Lite",
2298                 .no_msp34xx     = 1,
2299                 .no_tda7432     = 1,
2300                 .pll            = PLL_28,
2301                 .no_video       = 1,
2302                 .has_dvb        = 1,
2303                 .tuner_type     = TUNER_ABSENT,
2304                 .tuner_addr     = ADDR_UNSET,
2305         },
2306         [BTTV_BOARD_VGEAR_MYVCD] = {
2307                 /* Steven <photon38@pchome.com.tw> */
2308                 .name           = "V-Gear MyVCD",
2309                 .video_inputs   = 3,
2310                 /* .audio_inputs= 1, */
2311                 .svhs           = 2,
2312                 .gpiomask       = 0x3f,
2313                 .muxsel         = MUXSEL(2, 3, 1, 0),
2314                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2315                 .gpiomute       = 0x31,
2316                 .no_msp34xx     = 1,
2317                 .pll            = PLL_28,
2318                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2319                 .tuner_addr     = ADDR_UNSET,
2320                 .has_radio      = 0,
2321         },
2322         [BTTV_BOARD_SUPER_TV] = {
2323                 /* Rick C <cryptdragoon@gmail.com> */
2324                 .name           = "Super TV Tuner",
2325                 .video_inputs   = 4,
2326                 /* .audio_inputs= 1, */
2327                 .svhs           = 2,
2328                 .muxsel         = MUXSEL(2, 3, 1, 0),
2329                 .tuner_type     = TUNER_PHILIPS_NTSC,
2330                 .tuner_addr     = ADDR_UNSET,
2331                 .gpiomask       = 0x008007,
2332                 .gpiomux        = { 0, 0x000001,0,0 },
2333                 .has_radio      = 1,
2334         },
2335         [BTTV_BOARD_TIBET_CS16] = {
2336                 /* Chris Fanning <video4linux@haydon.net> */
2337                 .name           = "Tibet Systems 'Progress DVR' CS16",
2338                 .video_inputs   = 16,
2339                 /* .audio_inputs= 0, */
2340                 .svhs           = NO_SVHS,
2341                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2342                 .pll            = PLL_28,
2343                 .no_msp34xx     = 1,
2344                 .no_tda7432     = 1,
2345                 .tuner_type     = TUNER_ABSENT,
2346                 .tuner_addr     = ADDR_UNSET,
2347                 .muxsel_hook    = tibetCS16_muxsel,
2348         },
2349         [BTTV_BOARD_KODICOM_4400R] = {
2350                 /* Bill Brack <wbrack@mmm.com.hk> */
2351                 /*
2352                 * Note that, because of the card's wiring, the "master"
2353                 * BT878A chip (i.e. the one which controls the analog switch
2354                 * and must use this card type) is the 2nd one detected.  The
2355                 * other 3 chips should use card type 0x85, whose description
2356                 * follows this one.  There is a EEPROM on the card (which is
2357                 * connected to the I2C of one of those other chips), but is
2358                 * not currently handled.  There is also a facility for a
2359                 * "monitor", which is also not currently implemented.
2360                 */
2361                 .name           = "Kodicom 4400R (master)",
2362                 .video_inputs   = 16,
2363                 /* .audio_inputs= 0, */
2364                 .tuner_type     = TUNER_ABSENT,
2365                 .tuner_addr     = ADDR_UNSET,
2366                 .svhs           = NO_SVHS,
2367                 /* GPIO bits 0-9 used for analog switch:
2368                 *   00 - 03:    camera selector
2369                 *   04 - 06:    channel (controller) selector
2370                 *   07: data (1->on, 0->off)
2371                 *   08: strobe
2372                 *   09: reset
2373                 * bit 16 is input from sync separator for the channel
2374                 */
2375                 .gpiomask       = 0x0003ff,
2376                 .no_gpioirq     = 1,
2377                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2378                 .pll            = PLL_28,
2379                 .no_msp34xx     = 1,
2380                 .no_tda7432     = 1,
2381                 .muxsel_hook    = kodicom4400r_muxsel,
2382         },
2383         [BTTV_BOARD_KODICOM_4400R_SL] = {
2384                 /* Bill Brack <wbrack@mmm.com.hk> */
2385                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2386                 * one which controls the analog switch, and must use the card type)
2387                 * is the 2nd one detected.  The other 3 chips should use this card
2388                 * type
2389                 */
2390                 .name           = "Kodicom 4400R (slave)",
2391                 .video_inputs   = 16,
2392                 /* .audio_inputs= 0, */
2393                 .tuner_type     = TUNER_ABSENT,
2394                 .tuner_addr     = ADDR_UNSET,
2395                 .svhs           = NO_SVHS,
2396                 .gpiomask       = 0x010000,
2397                 .no_gpioirq     = 1,
2398                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2399                 .pll            = PLL_28,
2400                 .no_msp34xx     = 1,
2401                 .no_tda7432     = 1,
2402                 .muxsel_hook    = kodicom4400r_muxsel,
2403         },
2404                 /* ---- card 0x86---------------------------------- */
2405         [BTTV_BOARD_ADLINK_RTV24] = {
2406                 /* Michael Henson <mhenson@clarityvi.com> */
2407                 /* Adlink RTV24 with special unlock codes */
2408                 .name           = "Adlink RTV24",
2409                 .video_inputs   = 4,
2410                 /* .audio_inputs= 1, */
2411                 .svhs           = 2,
2412                 .muxsel         = MUXSEL(2, 3, 1, 0),
2413                 .tuner_type     = UNSET,
2414                 .tuner_addr     = ADDR_UNSET,
2415                 .pll            = PLL_28,
2416         },
2417                 /* ---- card 0x87---------------------------------- */
2418         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2419                 /* Michael Krufky <mkrufky@linuxtv.org> */
2420                 .name           = "DViCO FusionHDTV 5 Lite",
2421                 .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2422                 .tuner_addr     = ADDR_UNSET,
2423                 .video_inputs   = 3,
2424                 /* .audio_inputs= 1, */
2425                 .svhs           = 2,
2426                 .muxsel         = MUXSEL(2, 3, 1),
2427                 .gpiomask       = 0x00e00007,
2428                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2429                 .gpiomute       = 0x00c00007,
2430                 .no_msp34xx     = 1,
2431                 .no_tda7432     = 1,
2432                 .has_dvb        = 1,
2433         },
2434                 /* ---- card 0x88---------------------------------- */
2435         [BTTV_BOARD_ACORP_Y878F] = {
2436                 /* Mauro Carvalho Chehab <mchehab@kernel.org> */
2437                 .name           = "Acorp Y878F",
2438                 .video_inputs   = 3,
2439                 /* .audio_inputs= 1, */
2440                 .svhs           = 2,
2441                 .gpiomask       = 0x01fe00,
2442                 .muxsel         = MUXSEL(2, 3, 1, 1),
2443                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2444                 .gpiomute       = 0x002000,
2445                 .pll            = PLL_28,
2446                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2447                 .tuner_addr     = 0xc1 >>1,
2448                 .has_radio      = 1,
2449         },
2450                 /* ---- card 0x89 ---------------------------------- */
2451         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2452                 .name           = "Conceptronic CTVFMi v2",
2453                 .video_inputs   = 3,
2454                 /* .audio_inputs= 1, */
2455                 .svhs           = 2,
2456                 .gpiomask       = 0x001c0007,
2457                 .muxsel         = MUXSEL(2, 3, 1, 1),
2458                 .gpiomux        = { 0, 1, 2, 2 },
2459                 .gpiomute       = 3,
2460                 .pll            = PLL_28,
2461                 .tuner_type     = TUNER_TENA_9533_DI,
2462                 .tuner_addr     = ADDR_UNSET,
2463                 .has_remote     = 1,
2464                 .has_radio      = 1,
2465         },
2466                 /* ---- card 0x8a ---------------------------------- */
2467         [BTTV_BOARD_PV_BT878P_2E] = {
2468                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2469                 .video_inputs   = 5,
2470                 /* .audio_inputs= 1, */
2471                 .svhs           = 3,
2472                 .has_dig_in     = 1,
2473                 .gpiomask       = 0x01fe00,
2474                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2475                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2476                 .gpiomux        = { 0x00400, 0x10400, 0x04400, 0x80000 },
2477                 .gpiomute       = 0x12400,
2478                 .no_msp34xx     = 1,
2479                 .pll            = PLL_28,
2480                 .tuner_type     = TUNER_LG_PAL_FM,
2481                 .tuner_addr     = ADDR_UNSET,
2482                 .has_remote     = 1,
2483         },
2484                 /* ---- card 0x8b ---------------------------------- */
2485         [BTTV_BOARD_PV_M4900] = {
2486                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2487                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2488                 .video_inputs   = 3,
2489                 /* .audio_inputs= 1, */
2490                 .svhs           = 2,
2491                 .gpiomask       = 0x3f,
2492                 .muxsel         = MUXSEL(2, 3, 1, 1),
2493                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2494                 .gpiomute       = 0x29,
2495                 .no_msp34xx     = 1,
2496                 .pll            = PLL_28,
2497                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2498                 .tuner_addr     = ADDR_UNSET,
2499                 .has_radio      = 1,
2500                 .has_remote     = 1,
2501         },
2502                 /* ---- card 0x8c ---------------------------------- */
2503         /* Has four Bt878 chips behind a PCI bridge, each chip has:
2504              one external BNC composite input (mux 2)
2505              three internal composite inputs (unknown muxes)
2506              an 18-bit stereo A/D (CS5331A), which has:
2507                one external stereo unbalanced (RCA) audio connection
2508                one (or 3?) internal stereo balanced (XLR) audio connection
2509                input is selected via gpio to a 14052B mux
2510                  (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2511                gain is controlled via an X9221A chip on the I2C bus @0x28
2512                sample rate is controlled via gpio to an MK1413S
2513                  (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2514              There is neither a tuner nor an svideo input. */
2515         [BTTV_BOARD_OSPREY440]  = {
2516                 .name           = "Osprey 440",
2517                 .video_inputs   = 4,
2518                 /* .audio_inputs= 2, */
2519                 .svhs           = NO_SVHS,
2520                 .muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2521                 .gpiomask       = 0x303,
2522                 .gpiomute       = 0x000, /* int + 32kHz */
2523                 .gpiomux        = { 0, 0, 0x000, 0x100},
2524                 .pll            = PLL_28,
2525                 .tuner_type     = TUNER_ABSENT,
2526                 .tuner_addr     = ADDR_UNSET,
2527                 .no_msp34xx     = 1,
2528                 .no_tda7432     = 1,
2529         },
2530                 /* ---- card 0x8d ---------------------------------- */
2531         [BTTV_BOARD_ASOUND_SKYEYE] = {
2532                 .name           = "Asound Skyeye PCTV",
2533                 .video_inputs   = 3,
2534                 /* .audio_inputs= 1, */
2535                 .svhs           = 2,
2536                 .gpiomask       = 15,
2537                 .muxsel         = MUXSEL(2, 3, 1, 1),
2538                 .gpiomux        = { 2, 0, 0, 0 },
2539                 .gpiomute       = 1,
2540                 .pll            = PLL_28,
2541                 .tuner_type     = TUNER_PHILIPS_NTSC,
2542                 .tuner_addr     = ADDR_UNSET,
2543         },
2544                 /* ---- card 0x8e ---------------------------------- */
2545         [BTTV_BOARD_SABRENT_TVFM] = {
2546                 .name           = "Sabrent TV-FM (bttv version)",
2547                 .video_inputs   = 3,
2548                 /* .audio_inputs= 1, */
2549                 .svhs           = 2,
2550                 .gpiomask       = 0x108007,
2551                 .muxsel         = MUXSEL(2, 3, 1, 1),
2552                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2553                 .no_msp34xx     = 1,
2554                 .no_tda7432     = 1,
2555                 .pll            = PLL_28,
2556                 .tuner_type     = TUNER_TNF_5335MF,
2557                 .tuner_addr     = ADDR_UNSET,
2558                 .has_radio      = 1,
2559         },
2560         /* ---- card 0x8f ---------------------------------- */
2561         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2562                 .name           = "Hauppauge ImpactVCB (bt878)",
2563                 .video_inputs   = 4,
2564                 /* .audio_inputs= 0, */
2565                 .svhs           = NO_SVHS,
2566                 .gpiomask       = 0x0f, /* old: 7 */
2567                 .muxsel         = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2568                 .no_msp34xx     = 1,
2569                 .no_tda7432     = 1,
2570                 .tuner_type     = TUNER_ABSENT,
2571                 .tuner_addr     = ADDR_UNSET,
2572         },
2573         [BTTV_BOARD_MACHTV_MAGICTV] = {
2574                 /* Julian Calaby <julian.calaby@gmail.com>
2575                  * Slightly different from original MachTV definition (0x60)
2576
2577                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2578                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2579                  * properly (methinks) causing no keyup bits being set */
2580
2581                 .name           = "MagicTV", /* rebranded MachTV */
2582                 .video_inputs   = 3,
2583                 /* .audio_inputs= 1, */
2584                 .svhs           = 2,
2585                 .gpiomask       = 7,
2586                 .muxsel         = MUXSEL(2, 3, 1, 1),
2587                 .gpiomux        = { 0, 1, 2, 3 },
2588                 .gpiomute       = 4,
2589                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2590                 .tuner_addr     = ADDR_UNSET,
2591                 .pll            = PLL_28,
2592                 .has_radio      = 1,
2593                 .has_remote     = 1,
2594         },
2595         [BTTV_BOARD_SSAI_SECURITY] = {
2596                 .name           = "SSAI Security Video Interface",
2597                 .video_inputs   = 4,
2598                 /* .audio_inputs= 0, */
2599                 .svhs           = NO_SVHS,
2600                 .muxsel         = MUXSEL(0, 1, 2, 3),
2601                 .tuner_type     = TUNER_ABSENT,
2602                 .tuner_addr     = ADDR_UNSET,
2603         },
2604         [BTTV_BOARD_SSAI_ULTRASOUND] = {
2605                 .name           = "SSAI Ultrasound Video Interface",
2606                 .video_inputs   = 2,
2607                 /* .audio_inputs= 0, */
2608                 .svhs           = 1,
2609                 .muxsel         = MUXSEL(2, 0, 1, 3),
2610                 .tuner_type     = TUNER_ABSENT,
2611                 .tuner_addr     = ADDR_UNSET,
2612         },
2613         /* ---- card 0x94---------------------------------- */
2614         [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2615                 .name           = "DViCO FusionHDTV 2",
2616                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2617                 .tuner_addr     = ADDR_UNSET,
2618                 .video_inputs   = 3,
2619                 /* .audio_inputs= 1, */
2620                 .svhs           = 2,
2621                 .muxsel         = MUXSEL(2, 3, 1),
2622                 .gpiomask       = 0x00e00007,
2623                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2624                 .gpiomute       = 0x00c00007,
2625                 .no_msp34xx     = 1,
2626                 .no_tda7432     = 1,
2627         },
2628         /* ---- card 0x95---------------------------------- */
2629         [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2630                 .name           = "Typhoon TV-Tuner PCI (50684)",
2631                 .video_inputs   = 3,
2632                 /* .audio_inputs= 1, */
2633                 .svhs           = 2,
2634                 .gpiomask       = 0x3014f,
2635                 .muxsel         = MUXSEL(2, 3, 1, 1),
2636                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
2637                 .gpiomute       = 10,
2638                 .pll            = PLL_28,
2639                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2640                 .tuner_addr     = ADDR_UNSET,
2641         },
2642         [BTTV_BOARD_GEOVISION_GV600] = {
2643                 /* emhn@usb.ve */
2644                 .name           = "Geovision GV-600",
2645                 .video_inputs   = 16,
2646                 /* .audio_inputs= 0, */
2647                 .svhs           = NO_SVHS,
2648                 .gpiomask       = 0x0,
2649                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2650                 .muxsel_hook    = geovision_muxsel,
2651                 .gpiomux        = { 0 },
2652                 .no_msp34xx     = 1,
2653                 .pll            = PLL_28,
2654                 .tuner_type     = TUNER_ABSENT,
2655                 .tuner_addr     = ADDR_UNSET,
2656         },
2657         [BTTV_BOARD_KOZUMI_KTV_01C] = {
2658                 /* Mauro Lacy <mauro@lacy.com.ar>
2659                  * Based on MagicTV and Conceptronic CONTVFMi */
2660
2661                 .name           = "Kozumi KTV-01C",
2662                 .video_inputs   = 3,
2663                 /* .audio_inputs= 1, */
2664                 .svhs           = 2,
2665                 .gpiomask       = 0x008007,
2666                 .muxsel         = MUXSEL(2, 3, 1, 1),
2667                 .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2668                 .gpiomute       = 3, /* CONTVFMi */
2669                 .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2670                 .tuner_addr     = ADDR_UNSET,
2671                 .pll            = PLL_28,
2672                 .has_radio      = 1,
2673                 .has_remote     = 1,
2674         },
2675         [BTTV_BOARD_ENLTV_FM_2] = {
2676                 /* Encore TV Tuner Pro ENL TV-FM-2
2677                    Mauro Carvalho Chehab <mchehab@kernel.org> */
2678                 .name           = "Encore ENL TV-FM-2",
2679                 .video_inputs   = 3,
2680                 /* .audio_inputs= 1, */
2681                 .svhs           = 2,
2682                 /* bit 6          -> IR disabled
2683                    bit 18/17 = 00 -> mute
2684                                01 -> enable external audio input
2685                                10 -> internal audio input (mono?)
2686                                11 -> internal audio input
2687                  */
2688                 .gpiomask       = 0x060040,
2689                 .muxsel         = MUXSEL(2, 3, 3),
2690                 .gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2691                 .gpiomute       = 0,
2692                 .tuner_type     = TUNER_TCL_MF02GIP_5N,
2693                 .tuner_addr     = ADDR_UNSET,
2694                 .pll            = PLL_28,
2695                 .has_radio      = 1,
2696                 .has_remote     = 1,
2697         },
2698         [BTTV_BOARD_VD012] = {
2699                 /* D.Heer@Phytec.de */
2700                 .name           = "PHYTEC VD-012 (bt878)",
2701                 .video_inputs   = 4,
2702                 /* .audio_inputs= 0, */
2703                 .svhs           = NO_SVHS,
2704                 .gpiomask       = 0x00,
2705                 .muxsel         = MUXSEL(0, 2, 3, 1),
2706                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2707                 .pll            = PLL_28,
2708                 .tuner_type     = TUNER_ABSENT,
2709                 .tuner_addr     = ADDR_UNSET,
2710         },
2711         [BTTV_BOARD_VD012_X1] = {
2712                 /* D.Heer@Phytec.de */
2713                 .name           = "PHYTEC VD-012-X1 (bt878)",
2714                 .video_inputs   = 4,
2715                 /* .audio_inputs= 0, */
2716                 .svhs           = 3,
2717                 .gpiomask       = 0x00,
2718                 .muxsel         = MUXSEL(2, 3, 1),
2719                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2720                 .pll            = PLL_28,
2721                 .tuner_type     = TUNER_ABSENT,
2722                 .tuner_addr     = ADDR_UNSET,
2723         },
2724         [BTTV_BOARD_VD012_X2] = {
2725                 /* D.Heer@Phytec.de */
2726                 .name           = "PHYTEC VD-012-X2 (bt878)",
2727                 .video_inputs   = 4,
2728                 /* .audio_inputs= 0, */
2729                 .svhs           = 3,
2730                 .gpiomask       = 0x00,
2731                 .muxsel         = MUXSEL(3, 2, 1),
2732                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2733                 .pll            = PLL_28,
2734                 .tuner_type     = TUNER_ABSENT,
2735                 .tuner_addr     = ADDR_UNSET,
2736         },
2737         [BTTV_BOARD_GEOVISION_GV800S] = {
2738                 /* Bruno Christo <bchristo@inf.ufsm.br>
2739                  *
2740                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2741                  *      1 audio input  per BT878A = 4 audio inputs
2742                  *      4 video inputs per BT878A = 16 video inputs
2743                  * This is the first BT878A chip of the GV-800(S). It's the
2744                  * "master" chip and it controls the video inputs through an
2745                  * analog multiplexer (a CD22M3494) via some GPIO pins. The
2746                  * slaves should use card type 0x9e (following this one).
2747                  * There is a EEPROM on the card which is currently not handled.
2748                  * The audio input is not working yet.
2749                  */
2750                 .name           = "Geovision GV-800(S) (master)",
2751                 .video_inputs   = 4,
2752                 /* .audio_inputs= 1, */
2753                 .tuner_type     = TUNER_ABSENT,
2754                 .tuner_addr     = ADDR_UNSET,
2755                 .svhs           = NO_SVHS,
2756                 .gpiomask       = 0xf107f,
2757                 .no_gpioirq     = 1,
2758                 .muxsel         = MUXSEL(2, 2, 2, 2),
2759                 .pll            = PLL_28,
2760                 .no_msp34xx     = 1,
2761                 .no_tda7432     = 1,
2762                 .muxsel_hook    = gv800s_muxsel,
2763         },
2764         [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2765                 /* Bruno Christo <bchristo@inf.ufsm.br>
2766                  *
2767                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2768                  *      1 audio input  per BT878A = 4 audio inputs
2769                  *      4 video inputs per BT878A = 16 video inputs
2770                  * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2771                  * and should use this card type.
2772                  * The audio input is not working yet.
2773                  */
2774                 .name           = "Geovision GV-800(S) (slave)",
2775                 .video_inputs   = 4,
2776                 /* .audio_inputs= 1, */
2777                 .tuner_type     = TUNER_ABSENT,
2778                 .tuner_addr     = ADDR_UNSET,
2779                 .svhs           = NO_SVHS,
2780                 .gpiomask       = 0x00,
2781                 .no_gpioirq     = 1,
2782                 .muxsel         = MUXSEL(2, 2, 2, 2),
2783                 .pll            = PLL_28,
2784                 .no_msp34xx     = 1,
2785                 .no_tda7432     = 1,
2786                 .muxsel_hook    = gv800s_muxsel,
2787         },
2788         [BTTV_BOARD_PV183] = {
2789                 .name           = "ProVideo PV183", /* 0x9f */
2790                 .video_inputs   = 2,
2791                 /* .audio_inputs= 0, */
2792                 .svhs           = NO_SVHS,
2793                 .gpiomask       = 0,
2794                 .muxsel         = MUXSEL(2, 3),
2795                 .gpiomux        = { 0 },
2796                 .no_msp34xx     = 1,
2797                 .pll            = PLL_28,
2798                 .tuner_type     = TUNER_ABSENT,
2799                 .tuner_addr     = ADDR_UNSET,
2800         },
2801         /* ---- card 0xa0---------------------------------- */
2802         [BTTV_BOARD_TVT_TD3116] = {
2803                 .name           = "Tongwei Video Technology TD-3116",
2804                 .video_inputs   = 16,
2805                 .gpiomask       = 0xc00ff,
2806                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2807                 .muxsel_hook    = td3116_muxsel,
2808                 .svhs           = NO_SVHS,
2809                 .pll            = PLL_28,
2810                 .tuner_type     = TUNER_ABSENT,
2811         },
2812         [BTTV_BOARD_APOSONIC_WDVR] = {
2813                 .name           = "Aposonic W-DVR",
2814                 .video_inputs   = 4,
2815                 .svhs           = NO_SVHS,
2816                 .muxsel         = MUXSEL(2, 3, 1, 0),
2817                 .tuner_type     = TUNER_ABSENT,
2818         },
2819         [BTTV_BOARD_ADLINK_MPG24] = {
2820                 /* Adlink MPG24 */
2821                 .name           = "Adlink MPG24",
2822                 .video_inputs   = 1,
2823                 /* .audio_inputs= 1, */
2824                 .svhs           = NO_SVHS,
2825                 .muxsel         = MUXSEL(2, 2, 2, 2),
2826                 .tuner_type     = UNSET,
2827                 .tuner_addr     = ADDR_UNSET,
2828                 .pll            = PLL_28,
2829         },
2830         [BTTV_BOARD_BT848_CAP_14] = {
2831                 .name           = "Bt848 Capture 14MHz",
2832                 .video_inputs   = 4,
2833                 .svhs           = 2,
2834                 .muxsel         = MUXSEL(2, 3, 1, 0),
2835                 .pll            = PLL_14,
2836                 .tuner_type     = TUNER_ABSENT,
2837         },
2838         [BTTV_BOARD_CYBERVISION_CV06] = {
2839                 .name           = "CyberVision CV06 (SV)",
2840                 .video_inputs   = 4,
2841                 /* .audio_inputs= 0, */
2842                 .svhs           = NO_SVHS,
2843                 .muxsel         = MUXSEL(2, 3, 1, 0),
2844                 .pll            = PLL_28,
2845                 .tuner_type     = TUNER_ABSENT,
2846                 .tuner_addr     = ADDR_UNSET,
2847         },
2848         [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = {
2849                 /* Pojar George <geoubuntu@gmail.com> */
2850                 .name           = "Kworld V-Stream Xpert TV PVR878",
2851                 .video_inputs   = 3,
2852                 /* .audio_inputs= 1, */
2853                 .svhs           = 2,
2854                 .gpiomask       = 0x001c0007,
2855                 .muxsel         = MUXSEL(2, 3, 1, 1),
2856                 .gpiomux        = { 0, 1, 2, 2 },
2857                 .gpiomute       = 3,
2858                 .pll            = PLL_28,
2859                 .tuner_type     = TUNER_TENA_9533_DI,
2860                 .tuner_addr    = ADDR_UNSET,
2861                 .has_remote     = 1,
2862                 .has_radio      = 1,
2863         },
2864         /* ---- card 0xa6---------------------------------- */
2865         [BTTV_BOARD_PCI_8604PW] = {
2866                 /* PCI-8604PW with special unlock sequence */
2867                 .name           = "PCI-8604PW",
2868                 .video_inputs   = 2,
2869                 /* .audio_inputs= 0, */
2870                 .svhs           = NO_SVHS,
2871                 /* The second input is available on CN4, if populated.
2872                  * The other 5x2 header (CN2?) connects to the same inputs
2873                  * as the on-board BNCs */
2874                 .muxsel         = MUXSEL(2, 3),
2875                 .tuner_type     = TUNER_ABSENT,
2876                 .no_msp34xx     = 1,
2877                 .no_tda7432     = 1,
2878                 .pll            = PLL_35,
2879         },
2880 };
2881
2882 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2883
2884 /* ----------------------------------------------------------------------- */
2885
2886 static unsigned char eeprom_data[256];
2887
2888 /*
2889  * identify card
2890  */
2891 void bttv_idcard(struct bttv *btv)
2892 {
2893         unsigned int gpiobits;
2894         int i,type;
2895
2896         /* read PCI subsystem ID */
2897         btv->cardid  = btv->c.pci->subsystem_device << 16;
2898         btv->cardid |= btv->c.pci->subsystem_vendor;
2899
2900         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2901                 /* look for the card */
2902                 for (type = -1, i = 0; cards[i].id != 0; i++)
2903                         if (cards[i].id  == btv->cardid)
2904                                 type = i;
2905
2906                 if (type != -1) {
2907                         /* found it */
2908                         pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2909                                 btv->c.nr, cards[type].name, cards[type].cardnr,
2910                                 btv->cardid & 0xffff,
2911                                 (btv->cardid >> 16) & 0xffff);
2912                         btv->c.type = cards[type].cardnr;
2913                 } else {
2914                         /* 404 */
2915                         pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2916                                 btv->c.nr, btv->cardid & 0xffff,
2917                                 (btv->cardid >> 16) & 0xffff);
2918                         pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2919                 }
2920         }
2921
2922         /* let the user override the autodetected type */
2923         if (card[btv->c.nr] < bttv_num_tvcards)
2924                 btv->c.type=card[btv->c.nr];
2925
2926         /* print which card config we are using */
2927         pr_info("%d: using: %s [card=%d,%s]\n",
2928                 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2929                 card[btv->c.nr] < bttv_num_tvcards
2930                 ? "insmod option" : "autodetected");
2931
2932         /* overwrite gpio stuff ?? */
2933         if (UNSET == audioall && UNSET == audiomux[0])
2934                 return;
2935
2936         if (UNSET != audiomux[0]) {
2937                 gpiobits = 0;
2938                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2939                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2940                         gpiobits |= audiomux[i];
2941                 }
2942         } else {
2943                 gpiobits = audioall;
2944                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2945                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2946                 }
2947         }
2948         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2949         pr_info("%d: gpio config override: mask=0x%x, mux=",
2950                 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2951         for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2952                 pr_cont("%s0x%x",
2953                         i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2954         }
2955         pr_cont("\n");
2956 }
2957
2958 /*
2959  * (most) board specific initialisations goes here
2960  */
2961
2962 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2963 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2964 {
2965         int type = -1;
2966
2967         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2968                 type = BTTV_BOARD_MODTEC_205;
2969         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2970                 type = BTTV_BOARD_EURESYS_PICOLO;
2971         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2972                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2973
2974         if (-1 != type) {
2975                 btv->c.type = type;
2976                 pr_info("%d: detected by eeprom: %s [card=%d]\n",
2977                         btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2978         }
2979 }
2980
2981 static void flyvideo_gpio(struct bttv *btv)
2982 {
2983         int gpio, has_remote, has_radio, is_capture_only;
2984         int is_lr90, has_tda9820_tda9821;
2985         int tuner_type = UNSET, ttype;
2986
2987         gpio_inout(0xffffff, 0);
2988         udelay(8);  /* without this we would see the 0x1800 mask */
2989         gpio = gpio_read();
2990         /* FIXME: must restore OUR_EN ??? */
2991
2992         /* all cards provide GPIO info, some have an additional eeprom
2993          * LR50: GPIO coding can be found lower right CP1 .. CP9
2994          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2995          *       GPIO14-12: n.c.
2996          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2997
2998          * lowest 3 bytes are remote control codes (no handshake needed)
2999          * xxxFFF: No remote control chip soldered
3000          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3001          * Note: Some bits are Audio_Mask !
3002          */
3003         ttype = (gpio & 0x0f0000) >> 16;
3004         switch (ttype) {
3005         case 0x0:
3006                 tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3007                 break;
3008         case 0x2:
3009                 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3010                 break;
3011         case 0x4:
3012                 tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3013                 break;
3014         case 0x6:
3015                 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3016                 break;
3017         case 0xC:
3018                 tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3019                 break;
3020         default:
3021                 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
3022                 break;
3023         }
3024
3025         has_remote          =   gpio & 0x800000;
3026         has_radio           =   gpio & 0x400000;
3027         /*   unknown                   0x200000;
3028          *   unknown2                  0x100000; */
3029         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3030         has_tda9820_tda9821 = !(gpio & 0x004000);
3031         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3032         /*
3033          * gpio & 0x001000    output bit for audio routing */
3034
3035         if (is_capture_only)
3036                 tuner_type = TUNER_ABSENT; /* No tuner present */
3037
3038         pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3039                 btv->c.nr, has_radio ? "yes" : "no",
3040                 has_remote ? "yes" : "no", tuner_type, gpio);
3041         pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3042                 btv->c.nr, is_lr90 ? "yes" : "no",
3043                 has_tda9820_tda9821 ? "yes" : "no",
3044                 is_capture_only ? "yes" : "no");
3045
3046         if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3047                 btv->tuner_type = tuner_type;
3048         btv->has_radio = has_radio;
3049
3050         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3051          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3052          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3053         if (has_tda9820_tda9821)
3054                 btv->audio_mode_gpio = lt9415_audio;
3055         /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3056 }
3057
3058 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3059                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3060 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3061                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3062
3063 static void miro_pinnacle_gpio(struct bttv *btv)
3064 {
3065         int id,msp,gpio;
3066         char *info;
3067
3068         gpio_inout(0xffffff, 0);
3069         gpio = gpio_read();
3070         id   = ((gpio>>10) & 63) -1;
3071         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3072         if (id < 32) {
3073                 btv->tuner_type = miro_tunermap[id];
3074                 if (0 == (gpio & 0x20)) {
3075                         btv->has_radio = 1;
3076                         if (!miro_fmtuner[id]) {
3077                                 btv->has_tea575x = 1;
3078                                 btv->tea_gpio.wren = 6;
3079                                 btv->tea_gpio.most = 7;
3080                                 btv->tea_gpio.clk  = 8;
3081                                 btv->tea_gpio.data = 9;
3082                                 tea575x_init(btv);
3083                         }
3084                 } else {
3085                         btv->has_radio = 0;
3086                 }
3087                 if (-1 != msp) {
3088                         if (btv->c.type == BTTV_BOARD_MIRO)
3089                                 btv->c.type = BTTV_BOARD_MIROPRO;
3090                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3091                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3092                 }
3093                 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3094                         btv->c.nr, id+1, btv->tuner_type,
3095                         !btv->has_radio ? "no" :
3096                         (btv->has_tea575x ? "tea575x" : "fmtuner"),
3097                         (-1 == msp) ? "no" : "yes");
3098         } else {
3099                 /* new cards with microtune tuner */
3100                 id = 63 - id;
3101                 btv->has_radio = 0;
3102                 switch (id) {
3103                 case 1:
3104                         info = "PAL / mono";
3105                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3106                         break;
3107                 case 2:
3108                         info = "PAL+SECAM / stereo";
3109                         btv->has_radio = 1;
3110                         btv->tda9887_conf = TDA9887_QSS;
3111                         break;
3112                 case 3:
3113                         info = "NTSC / stereo";
3114                         btv->has_radio = 1;
3115                         btv->tda9887_conf = TDA9887_QSS;
3116                         break;
3117                 case 4:
3118                         info = "PAL+SECAM / mono";
3119                         btv->tda9887_conf = TDA9887_QSS;
3120                         break;
3121                 case 5:
3122                         info = "NTSC / mono";
3123                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3124                         break;
3125                 case 6:
3126                         info = "NTSC / stereo";
3127                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3128                         break;
3129                 case 7:
3130                         info = "PAL / stereo";
3131                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3132                         break;
3133                 default:
3134                         info = "oops: unknown card";
3135                         break;
3136                 }
3137                 if (-1 != msp)
3138                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3139                 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3140                         btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3141                 btv->tuner_type = TUNER_MT2032;
3142         }
3143 }
3144
3145 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3146 #define LM1882_SYNC_DRIVE     0x200000L
3147
3148 static void init_ids_eagle(struct bttv *btv)
3149 {
3150         gpio_inout(0xffffff,0xFFFF37);
3151         gpio_write(0x200020);
3152
3153         /* flash strobe inverter ?! */
3154         gpio_write(0x200024);
3155
3156         /* switch sync drive off */
3157         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3158
3159         /* set BT848 muxel to 2 */
3160         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3161 }
3162
3163 /* Muxsel helper for the IDS Eagle.
3164  * the eagles does not use the standard muxsel-bits but
3165  * has its own multiplexer */
3166 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3167 {
3168         gpio_bits(3, input & 3);
3169
3170         /* composite */
3171         /* set chroma ADC to sleep */
3172         btor(BT848_ADC_C_SLEEP, BT848_ADC);
3173         /* set to composite video */
3174         btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3175         btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3176
3177         /* switch sync drive off */
3178         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3179 }
3180
3181 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3182 {
3183         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3184         gpio_write(masks[input%4]);
3185 }
3186
3187 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3188    alarms output
3189
3190    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3191    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3192
3193    IN - sensor inputs, INx - sensor inputs and TI XORed together
3194    O1,O2,O3 - alarm outputs (relays)
3195
3196    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3197
3198 */
3199
3200 static void init_lmlbt4x(struct bttv *btv)
3201 {
3202         pr_debug("LMLBT4x init\n");
3203         btwrite(0x000000, BT848_GPIO_REG_INP);
3204         gpio_inout(0xffffff, 0x0006C0);
3205         gpio_write(0x000000);
3206 }
3207
3208 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3209 {
3210         unsigned int inmux = input % 8;
3211         gpio_inout( 0xf, 0xf );
3212         gpio_bits( 0xf, inmux );
3213 }
3214
3215 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3216 {
3217         unsigned int inmux = input % 4;
3218         gpio_inout( 3<<9, 3<<9 );
3219         gpio_bits( 3<<9, inmux<<9 );
3220 }
3221
3222 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3223 {
3224         unsigned int inmux = input % 16;
3225         gpio_inout(0xf, 0xf);
3226         gpio_bits(0xf, inmux);
3227 }
3228
3229 /*
3230  * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3231  * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3232  * The muxes are controlled via a 74HC373 latch which is connected to
3233  * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3234  * Q0 of the latch is connected to the Enable (~E) input of the first
3235  * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3236  * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3237  */
3238
3239 static void td3116_latch_value(struct bttv *btv, u32 value)
3240 {
3241         gpio_bits((1<<18) | 0xff, value);
3242         gpio_bits((1<<18) | 0xff, (1<<18) | value);
3243         udelay(1);
3244         gpio_bits((1<<18) | 0xff, value);
3245 }
3246
3247 static void td3116_muxsel(struct bttv *btv, unsigned int input)
3248 {
3249         u32 value;
3250         u32 highbit;
3251
3252         highbit = (input & 0x8) >> 3 ;
3253
3254         /* Disable outputs and set value in the mux */
3255         value = 0x11; /* Disable outputs */
3256         value |= ((input & 0x7) << 1)  << (4 * highbit);
3257         td3116_latch_value(btv, value);
3258
3259         /* Enable the correct output */
3260         value &= ~0x11;
3261         value |= ((highbit ^ 0x1) << 4) | highbit;
3262         td3116_latch_value(btv, value);
3263 }
3264
3265 /* ----------------------------------------------------------------------- */
3266
3267 static void bttv_reset_audio(struct bttv *btv)
3268 {
3269         /*
3270          * BT878A has a audio-reset register.
3271          * 1. This register is an audio reset function but it is in
3272          *    function-0 (video capture) address space.
3273          * 2. It is enough to do this once per power-up of the card.
3274          * 3. There is a typo in the Conexant doc -- it is not at
3275          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3276          * --//Shrikumar 030609
3277          */
3278         if (btv->id != 878)
3279                 return;
3280
3281         if (bttv_debug)
3282                 pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3283         btwrite((1<<7), 0x058);
3284         udelay(10);
3285         btwrite(     0, 0x058);
3286 }
3287
3288 /* initialization part one -- before registering i2c bus */
3289 void bttv_init_card1(struct bttv *btv)
3290 {
3291         switch (btv->c.type) {
3292         case BTTV_BOARD_HAUPPAUGE:
3293         case BTTV_BOARD_HAUPPAUGE878:
3294                 boot_msp34xx(btv,5);
3295                 break;
3296         case BTTV_BOARD_VOODOOTV_200:
3297         case BTTV_BOARD_VOODOOTV_FM:
3298                 boot_msp34xx(btv,20);
3299                 break;
3300         case BTTV_BOARD_AVERMEDIA98:
3301                 boot_msp34xx(btv,11);
3302                 break;
3303         case BTTV_BOARD_HAUPPAUGEPVR:
3304                 pvr_boot(btv);
3305                 break;
3306         case BTTV_BOARD_TWINHAN_DST:
3307         case BTTV_BOARD_AVDVBT_771:
3308         case BTTV_BOARD_PINNACLESAT:
3309                 btv->use_i2c_hw = 1;
3310                 break;
3311         case BTTV_BOARD_ADLINK_RTV24:
3312                 init_RTV24( btv );
3313                 break;
3314         case BTTV_BOARD_PCI_8604PW:
3315                 init_PCI8604PW(btv);
3316                 break;
3317
3318         }
3319         if (!bttv_tvcards[btv->c.type].has_dvb)
3320                 bttv_reset_audio(btv);
3321 }
3322
3323 /* initialization part two -- after registering i2c bus */
3324 void bttv_init_card2(struct bttv *btv)
3325 {
3326         btv->tuner_type = UNSET;
3327
3328         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3329                 bttv_readee(btv,eeprom_data,0xa0);
3330                 identify_by_eeprom(btv,eeprom_data);
3331         }
3332
3333         switch (btv->c.type) {
3334         case BTTV_BOARD_MIRO:
3335         case BTTV_BOARD_MIROPRO:
3336         case BTTV_BOARD_PINNACLE:
3337         case BTTV_BOARD_PINNACLEPRO:
3338                 /* miro/pinnacle */
3339                 miro_pinnacle_gpio(btv);
3340                 break;
3341         case BTTV_BOARD_FLYVIDEO_98:
3342         case BTTV_BOARD_MAXI:
3343         case BTTV_BOARD_LIFE_FLYKIT:
3344         case BTTV_BOARD_FLYVIDEO:
3345         case BTTV_BOARD_TYPHOON_TVIEW:
3346         case BTTV_BOARD_CHRONOS_VS2:
3347         case BTTV_BOARD_FLYVIDEO_98FM:
3348         case BTTV_BOARD_FLYVIDEO2000:
3349         case BTTV_BOARD_FLYVIDEO98EZ:
3350         case BTTV_BOARD_CONFERENCETV:
3351         case BTTV_BOARD_LIFETEC_9415:
3352                 flyvideo_gpio(btv);
3353                 break;
3354         case BTTV_BOARD_HAUPPAUGE:
3355         case BTTV_BOARD_HAUPPAUGE878:
3356         case BTTV_BOARD_HAUPPAUGEPVR:
3357                 /* pick up some config infos from the eeprom */
3358                 bttv_readee(btv,eeprom_data,0xa0);
3359                 hauppauge_eeprom(btv);
3360                 break;
3361         case BTTV_BOARD_AVERMEDIA98:
3362         case BTTV_BOARD_AVPHONE98:
3363                 bttv_readee(btv,eeprom_data,0xa0);
3364                 avermedia_eeprom(btv);
3365                 break;
3366         case BTTV_BOARD_PXC200:
3367                 init_PXC200(btv);
3368                 break;
3369         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3370                 picolo_tetra_init(btv);
3371                 break;
3372         case BTTV_BOARD_VHX:
3373                 btv->has_radio    = 1;
3374                 btv->has_tea575x  = 1;
3375                 btv->tea_gpio.wren = 5;
3376                 btv->tea_gpio.most = 6;
3377                 btv->tea_gpio.clk  = 3;
3378                 btv->tea_gpio.data = 4;
3379                 tea575x_init(btv);
3380                 break;
3381         case BTTV_BOARD_VOBIS_BOOSTAR:
3382         case BTTV_BOARD_TERRATV:
3383                 terratec_active_radio_upgrade(btv);
3384                 break;
3385         case BTTV_BOARD_MAGICTVIEW061:
3386                 if (btv->cardid == 0x3002144f) {
3387                         btv->has_radio=1;
3388                         pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3389                                 btv->c.nr);
3390                 }
3391                 break;
3392         case BTTV_BOARD_STB2:
3393                 if (btv->cardid == 0x3060121a) {
3394                         /* Fix up entry for 3DFX VoodooTV 100,
3395                            which is an OEM STB card variant. */
3396                         btv->has_radio=0;
3397                         btv->tuner_type=TUNER_TEMIC_NTSC;
3398                 }
3399                 break;
3400         case BTTV_BOARD_OSPREY1x0:
3401         case BTTV_BOARD_OSPREY1x0_848:
3402         case BTTV_BOARD_OSPREY101_848:
3403         case BTTV_BOARD_OSPREY1x1:
3404         case BTTV_BOARD_OSPREY1x1_SVID:
3405         case BTTV_BOARD_OSPREY2xx:
3406         case BTTV_BOARD_OSPREY2x0_SVID:
3407         case BTTV_BOARD_OSPREY2x0:
3408         case BTTV_BOARD_OSPREY440:
3409         case BTTV_BOARD_OSPREY500:
3410         case BTTV_BOARD_OSPREY540:
3411         case BTTV_BOARD_OSPREY2000:
3412                 bttv_readee(btv,eeprom_data,0xa0);
3413                 osprey_eeprom(btv, eeprom_data);
3414                 break;
3415         case BTTV_BOARD_IDS_EAGLE:
3416                 init_ids_eagle(btv);
3417                 break;
3418         case BTTV_BOARD_MODTEC_205:
3419                 bttv_readee(btv,eeprom_data,0xa0);
3420                 modtec_eeprom(btv);
3421                 break;
3422         case BTTV_BOARD_LMLBT4:
3423                 init_lmlbt4x(btv);
3424                 break;
3425         case BTTV_BOARD_TIBET_CS16:
3426                 tibetCS16_init(btv);
3427                 break;
3428         case BTTV_BOARD_KODICOM_4400R:
3429                 kodicom4400r_init(btv);
3430                 break;
3431         case BTTV_BOARD_GEOVISION_GV800S:
3432                 gv800s_init(btv);
3433                 break;
3434         }
3435
3436         /* pll configuration */
3437         if (!(btv->id==848 && btv->revision==0x11)) {
3438                 /* defaults from card list */
3439                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3440                         btv->pll.pll_ifreq=28636363;
3441                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3442                 }
3443                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3444                         btv->pll.pll_ifreq=35468950;
3445                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3446                 }
3447                 if (PLL_14 == bttv_tvcards[btv->c.type].pll) {
3448                         btv->pll.pll_ifreq = 14318181;
3449                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3450                 }
3451                 /* insmod options can override */
3452                 switch (pll[btv->c.nr]) {
3453                 case 0: /* none */
3454                         btv->pll.pll_crystal = 0;
3455                         btv->pll.pll_ifreq   = 0;
3456                         btv->pll.pll_ofreq   = 0;
3457                         break;
3458                 case 1: /* 28 MHz */
3459                 case 28:
3460                         btv->pll.pll_ifreq   = 28636363;
3461                         btv->pll.pll_ofreq   = 0;
3462                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3463                         break;
3464                 case 2: /* 35 MHz */
3465                 case 35:
3466                         btv->pll.pll_ifreq   = 35468950;
3467                         btv->pll.pll_ofreq   = 0;
3468                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3469                         break;
3470                 case 3: /* 14 MHz */
3471                 case 14:
3472                         btv->pll.pll_ifreq   = 14318181;
3473                         btv->pll.pll_ofreq   = 0;
3474                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3475                         break;
3476                 }
3477         }
3478         btv->pll.pll_current = -1;
3479
3480         /* tuner configuration (from card list / autodetect / insmod option) */
3481         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3482                 if (UNSET == btv->tuner_type)
3483                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3484         if (UNSET != tuner[btv->c.nr])
3485                 btv->tuner_type = tuner[btv->c.nr];
3486
3487         if (btv->tuner_type == TUNER_ABSENT)
3488                 pr_info("%d: tuner absent\n", btv->c.nr);
3489         else if (btv->tuner_type == UNSET)
3490                 pr_warn("%d: tuner type unset\n", btv->c.nr);
3491         else
3492                 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3493
3494         if (autoload != UNSET) {
3495                 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3496                 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3497                         btv->c.nr);
3498         }
3499
3500         if (UNSET == btv->tuner_type)
3501                 btv->tuner_type = TUNER_ABSENT;
3502
3503         btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3504                    bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3505         btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3506                     UNSET : bttv_tvcards[btv->c.type].svhs;
3507         if (svhs[btv->c.nr] != UNSET)
3508                 btv->svhs = svhs[btv->c.nr];
3509         if (remote[btv->c.nr] != UNSET)
3510                 btv->has_remote = remote[btv->c.nr];
3511
3512         if (bttv_tvcards[btv->c.type].has_radio)
3513                 btv->has_radio = 1;
3514         if (bttv_tvcards[btv->c.type].has_remote)
3515                 btv->has_remote = 1;
3516         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3517                 btv->gpioirq = 1;
3518         if (bttv_tvcards[btv->c.type].volume_gpio)
3519                 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3520         if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3521                 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3522
3523         if (btv->tuner_type == TUNER_ABSENT)
3524                 return;  /* no tuner or related drivers to load */
3525
3526         if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3527                 /* Probe for RDS receiver chip */
3528                 static const unsigned short addrs[] = {
3529                         0x20 >> 1,
3530                         0x22 >> 1,
3531                         I2C_CLIENT_END
3532                 };
3533                 struct v4l2_subdev *sd;
3534
3535                 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3536                         &btv->c.i2c_adap, "saa6588", 0, addrs);
3537                 btv->has_saa6588 = (sd != NULL);
3538         }
3539
3540         /* try to detect audio/fader chips */
3541
3542         /* First check if the user specified the audio chip via a module
3543            option. */
3544
3545         switch (audiodev[btv->c.nr]) {
3546         case -1:
3547                 return; /* do not load any audio module */
3548
3549         case 0: /* autodetect */
3550                 break;
3551
3552         case 1: {
3553                 /* The user specified that we should probe for msp3400 */
3554                 static const unsigned short addrs[] = {
3555                         I2C_ADDR_MSP3400 >> 1,
3556                         I2C_ADDR_MSP3400_ALT >> 1,
3557                         I2C_CLIENT_END
3558                 };
3559
3560                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3561                         &btv->c.i2c_adap, "msp3400", 0, addrs);
3562                 if (btv->sd_msp34xx)
3563                         return;
3564                 goto no_audio;
3565         }
3566
3567         case 2: {
3568                 /* The user specified that we should probe for tda7432 */
3569                 static const unsigned short addrs[] = {
3570                         I2C_ADDR_TDA7432 >> 1,
3571                         I2C_CLIENT_END
3572                 };
3573
3574                 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3575                                 &btv->c.i2c_adap, "tda7432", 0, addrs))
3576                         return;
3577                 goto no_audio;
3578         }
3579
3580         case 3: {
3581                 /* The user specified that we should probe for tvaudio */
3582                 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3583                         &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3584                 if (btv->sd_tvaudio)
3585                         return;
3586                 goto no_audio;
3587         }
3588
3589         default:
3590                 pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3591                 return;
3592         }
3593
3594         /* There were no overrides, so now we try to discover this through the
3595            card definition */
3596
3597         /* probe for msp3400 first: this driver can detect whether or not
3598            it really is a msp3400, so it will return NULL when the device
3599            found is really something else (e.g. a tea6300). */
3600         if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3601                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3602                         &btv->c.i2c_adap, "msp3400",
3603                         0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3604         } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3605                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3606                         &btv->c.i2c_adap, "msp3400",
3607                         0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3608         }
3609
3610         /* If we found a msp34xx, then we're done. */
3611         if (btv->sd_msp34xx)
3612                 return;
3613
3614         /* Now see if we can find one of the tvaudio devices. */
3615         btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3616                 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3617         if (btv->sd_tvaudio) {
3618                 /* There may be two tvaudio chips on the card, so try to
3619                    find another. */
3620                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3621                         &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3622         }
3623
3624         /* it might also be a tda7432. */
3625         if (!bttv_tvcards[btv->c.type].no_tda7432) {
3626                 static const unsigned short addrs[] = {
3627                         I2C_ADDR_TDA7432 >> 1,
3628                         I2C_CLIENT_END
3629                 };
3630
3631                 btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3632                                 &btv->c.i2c_adap, "tda7432", 0, addrs);
3633                 if (btv->sd_tda7432)
3634                         return;
3635         }
3636         if (btv->sd_tvaudio)
3637                 return;
3638
3639 no_audio:
3640         pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3641 }
3642
3643
3644 /* initialize the tuner */
3645 void bttv_init_tuner(struct bttv *btv)
3646 {
3647         int addr = ADDR_UNSET;
3648
3649         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3650                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3651
3652         if (btv->tuner_type != TUNER_ABSENT) {
3653                 struct tuner_setup tun_setup;
3654
3655                 /* Load tuner module before issuing tuner config call! */
3656                 if (btv->has_radio)
3657                         v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3658                                 &btv->c.i2c_adap, "tuner",
3659                                 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3660                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3661                                 &btv->c.i2c_adap, "tuner",
3662                                 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3663                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3664                                 &btv->c.i2c_adap, "tuner",
3665                                 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3666
3667                 tun_setup.mode_mask = T_ANALOG_TV;
3668                 tun_setup.type = btv->tuner_type;
3669                 tun_setup.addr = addr;
3670
3671                 if (btv->has_radio)
3672                         tun_setup.mode_mask |= T_RADIO;
3673
3674                 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3675         }
3676
3677         if (btv->tda9887_conf) {
3678                 struct v4l2_priv_tun_config tda9887_cfg;
3679
3680                 tda9887_cfg.tuner = TUNER_TDA9887;
3681                 tda9887_cfg.priv = &btv->tda9887_conf;
3682
3683                 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3684         }
3685 }
3686
3687 /* ----------------------------------------------------------------------- */
3688
3689 static void modtec_eeprom(struct bttv *btv)
3690 {
3691         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3692                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3693                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3694                         btv->c.nr, &eeprom_data[0x1e]);
3695         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3696                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3697                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3698                         btv->c.nr, &eeprom_data[0x1e]);
3699         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3700                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3701                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3702                         btv->c.nr, &eeprom_data[0x1e]);
3703         } else {
3704                 pr_info("%d: Modtec: Unknown TunerString: %s\n",
3705                         btv->c.nr, &eeprom_data[0x1e]);
3706         }
3707 }
3708
3709 static void hauppauge_eeprom(struct bttv *btv)
3710 {
3711         struct tveeprom tv;
3712
3713         tveeprom_hauppauge_analog(&tv, eeprom_data);
3714         btv->tuner_type = tv.tuner_type;
3715         btv->has_radio  = tv.has_radio;
3716
3717         pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3718                 btv->c.nr, tv.model);
3719
3720         /*
3721          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3722          * type based on model #.
3723          */
3724         if(tv.model == 64900) {
3725                 pr_info("%d: Switching board type from %s to %s\n",
3726                         btv->c.nr,
3727                         bttv_tvcards[btv->c.type].name,
3728                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3729                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3730         }
3731
3732         /* The 61334 needs the msp3410 to do the radio demod to get sound */
3733         if (tv.model == 61334)
3734                 btv->radio_uses_msp_demodulator = 1;
3735 }
3736
3737 /* ----------------------------------------------------------------------- */
3738
3739 static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
3740 {
3741         struct bttv *btv = tea->private_data;
3742         struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3743         u16 val = 0;
3744
3745         val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0;
3746         val |= (pins & TEA575X_CLK)  ? (1 << gpio.clk)  : 0;
3747         val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0;
3748
3749         gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val);
3750         if (btv->mbox_ior) {
3751                 /* IOW and CSEL active */
3752                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3753                 udelay(5);
3754                 /* all inactive */
3755                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3756                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3757         }
3758 }
3759
3760 static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea)
3761 {
3762         struct bttv *btv = tea->private_data;
3763         struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3764         u8 ret = 0;
3765         u16 val;
3766
3767         if (btv->mbox_ior) {
3768                 /* IOR and CSEL active */
3769                 gpio_bits(btv->mbox_ior | btv->mbox_csel, 0);
3770                 udelay(5);
3771         }
3772         val = gpio_read();
3773         if (btv->mbox_ior) {
3774                 /* all inactive */
3775                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3776                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3777         }
3778
3779         if (val & (1 << gpio.data))
3780                 ret |= TEA575X_DATA;
3781         if (val & (1 << gpio.most))
3782                 ret |= TEA575X_MOST;
3783
3784         return ret;
3785 }
3786
3787 static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output)
3788 {
3789         struct bttv *btv = tea->private_data;
3790         struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3791         u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) |
3792                    (1 << gpio.most);
3793
3794         if (output)
3795                 gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) |
3796                                  (1 << gpio.wren));
3797         else
3798                 gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren));
3799 }
3800
3801 static const struct snd_tea575x_ops bttv_tea_ops = {
3802         .set_pins = bttv_tea575x_set_pins,
3803         .get_pins = bttv_tea575x_get_pins,
3804         .set_direction = bttv_tea575x_set_direction,
3805 };
3806
3807 static int tea575x_init(struct bttv *btv)
3808 {
3809         btv->tea.private_data = btv;
3810         btv->tea.ops = &bttv_tea_ops;
3811         if (!snd_tea575x_hw_init(&btv->tea)) {
3812                 pr_info("%d: detected TEA575x radio\n", btv->c.nr);
3813                 btv->tea.mute = false;
3814                 return 0;
3815         }
3816
3817         btv->has_tea575x = 0;
3818         btv->has_radio = 0;
3819
3820         return -ENODEV;
3821 }
3822
3823 /* ----------------------------------------------------------------------- */
3824
3825 static int terratec_active_radio_upgrade(struct bttv *btv)
3826 {
3827         btv->has_radio    = 1;
3828         btv->has_tea575x  = 1;
3829         btv->tea_gpio.wren = 4;
3830         btv->tea_gpio.most = 5;
3831         btv->tea_gpio.clk  = 3;
3832         btv->tea_gpio.data = 2;
3833
3834         btv->mbox_iow     = 1 <<  8;
3835         btv->mbox_ior     = 1 <<  9;
3836         btv->mbox_csel    = 1 << 10;
3837
3838         if (!tea575x_init(btv)) {
3839                 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3840                 btv->has_saa6588 = 1;
3841         }
3842
3843         return 0;
3844 }
3845
3846
3847 /* ----------------------------------------------------------------------- */
3848
3849 /*
3850  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3851  *
3852  * /*(DEBLOBBED)*/
3853 #define PVR_GPIO_DELAY          10
3854
3855 #define BTTV_ALT_DATA           0x000001
3856 #define BTTV_ALT_DCLK           0x100000
3857 #define BTTV_ALT_NCONFIG        0x800000
3858
3859 static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
3860 {
3861         u32 n;
3862         u8 bits;
3863         int i;
3864
3865         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3866         gpio_write(0);
3867         udelay(PVR_GPIO_DELAY);
3868
3869         gpio_write(BTTV_ALT_NCONFIG);
3870         udelay(PVR_GPIO_DELAY);
3871
3872         for (n = 0; n < microlen; n++) {
3873                 bits = micro[n];
3874                 for (i = 0 ; i < 8 ; i++) {
3875                         gpio_bits(BTTV_ALT_DCLK,0);
3876                         if (bits & 0x01)
3877                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3878                         else
3879                                 gpio_bits(BTTV_ALT_DATA,0);
3880                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3881                         bits >>= 1;
3882                 }
3883         }
3884         gpio_bits(BTTV_ALT_DCLK,0);
3885         udelay(PVR_GPIO_DELAY);
3886
3887         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3888         for (i = 0 ; i < 30 ; i++) {
3889                 gpio_bits(BTTV_ALT_DCLK,0);
3890                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3891         }
3892         gpio_bits(BTTV_ALT_DCLK,0);
3893         return 0;
3894 }
3895
3896 static int pvr_boot(struct bttv *btv)
3897 {
3898         const struct firmware *fw_entry;
3899         int rc;
3900
3901         rc = reject_firmware(&fw_entry, "/*(DEBLOBBED)*/", &btv->c.pci->dev);
3902         if (rc != 0) {
3903                 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3904                 return rc;
3905         }
3906         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3907         pr_info("%d: altera firmware upload %s\n",
3908                 btv->c.nr, (rc < 0) ? "failed" : "ok");
3909         release_firmware(fw_entry);
3910         return rc;
3911 }
3912
3913 /* ----------------------------------------------------------------------- */
3914 /* some osprey specific stuff                                              */
3915
3916 static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
3917 {
3918         int i;
3919         u32 serial = 0;
3920         int cardid = -1;
3921
3922         /* This code will never actually get called in this case.... */
3923         if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3924                 /* this might be an antique... check for MMAC label in eeprom */
3925                 if (!strncmp(ee, "MMAC", 4)) {
3926                         u8 checksum = 0;
3927                         for (i = 0; i < 21; i++)
3928                                 checksum += ee[i];
3929                         if (checksum != ee[21])
3930                                 return;
3931                         cardid = BTTV_BOARD_OSPREY1x0_848;
3932                         for (i = 12; i < 21; i++) {
3933                                 serial *= 10;
3934                                 serial += ee[i] - '0';
3935                         }
3936                 }
3937         } else {
3938                 unsigned short type;
3939
3940                 for (i = 4 * 16; i < 8 * 16; i += 16) {
3941                         u16 checksum = (__force u16)ip_compute_csum(ee + i, 16);
3942
3943                         if ((checksum & 0xff) + (checksum >> 8) == 0xff)
3944                                 break;
3945                 }
3946                 if (i >= 8*16)
3947                         return;
3948                 ee += i;
3949
3950                 /* found a valid descriptor */
3951                 type = get_unaligned_be16((__be16 *)(ee+4));
3952
3953                 switch(type) {
3954                 /* 848 based */
3955                 case 0x0004:
3956                         cardid = BTTV_BOARD_OSPREY1x0_848;
3957                         break;
3958                 case 0x0005:
3959                         cardid = BTTV_BOARD_OSPREY101_848;
3960                         break;
3961
3962                 /* 878 based */
3963                 case 0x0012:
3964                 case 0x0013:
3965                         cardid = BTTV_BOARD_OSPREY1x0;
3966                         break;
3967                 case 0x0014:
3968                 case 0x0015:
3969                         cardid = BTTV_BOARD_OSPREY1x1;
3970                         break;
3971                 case 0x0016:
3972                 case 0x0017:
3973                 case 0x0020:
3974                         cardid = BTTV_BOARD_OSPREY1x1_SVID;
3975                         break;
3976                 case 0x0018:
3977                 case 0x0019:
3978                 case 0x001E:
3979                 case 0x001F:
3980                         cardid = BTTV_BOARD_OSPREY2xx;
3981                         break;
3982                 case 0x001A:
3983                 case 0x001B:
3984                         cardid = BTTV_BOARD_OSPREY2x0_SVID;
3985                         break;
3986                 case 0x0040:
3987                         cardid = BTTV_BOARD_OSPREY500;
3988                         break;
3989                 case 0x0050:
3990                 case 0x0056:
3991                         cardid = BTTV_BOARD_OSPREY540;
3992                         /* bttv_osprey_540_init(btv); */
3993                         break;
3994                 case 0x0060:
3995                 case 0x0070:
3996                 case 0x00A0:
3997                         cardid = BTTV_BOARD_OSPREY2x0;
3998                         /* enable output on select control lines */
3999                         gpio_inout(0xffffff,0x000303);
4000                         break;
4001                 case 0x00D8:
4002                         cardid = BTTV_BOARD_OSPREY440;
4003                         break;
4004                 default:
4005                         /* unknown...leave generic, but get serial # */
4006                         pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
4007                                 btv->c.nr, type);
4008                         break;
4009                 }
4010                 serial = get_unaligned_be32((__be32 *)(ee+6));
4011         }
4012
4013         pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
4014                 btv->c.nr, cardid,
4015                 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
4016
4017         if (cardid<0 || btv->c.type == cardid)
4018                 return;
4019
4020         /* card type isn't set correctly */
4021         if (card[btv->c.nr] < bttv_num_tvcards) {
4022                 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
4023                         btv->c.nr);
4024         } else {
4025                 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
4026                         btv->c.nr, btv->c.type, cardid);
4027                 btv->c.type = cardid;
4028         }
4029 }
4030
4031 /* ----------------------------------------------------------------------- */
4032 /* AVermedia specific stuff, from  bktr_card.c                             */
4033
4034 static int tuner_0_table[] = {
4035         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
4036         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
4037         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
4038         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
4039         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
4040         TUNER_PHILIPS_FM1216ME_MK3 };
4041
4042 static int tuner_1_table[] = {
4043         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
4044         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4045         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4046         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
4047         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
4048
4049 static void avermedia_eeprom(struct bttv *btv)
4050 {
4051         int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
4052
4053         tuner_make      = (eeprom_data[0x41] & 0x7);
4054         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
4055         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
4056         btv->has_remote = (eeprom_data[0x42] & 0x01);
4057
4058         if (tuner_make == 0 || tuner_make == 2)
4059                 if (tuner_format <= 0x0a)
4060                         tuner_type = tuner_0_table[tuner_format];
4061         if (tuner_make == 1)
4062                 if (tuner_format <= 9)
4063                         tuner_type = tuner_1_table[tuner_format];
4064
4065         if (tuner_make == 4)
4066                 if (tuner_format == 0x09)
4067                         tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
4068
4069         pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
4070                 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
4071         if (tuner_type) {
4072                 btv->tuner_type = tuner_type;
4073                 pr_cont("%d", tuner_type);
4074         } else
4075                 pr_cont("Unknown type");
4076         pr_cont(" radio:%s remote control:%s\n",
4077                tuner_tv_fm     ? "yes" : "no",
4078                btv->has_remote ? "yes" : "no");
4079 }
4080
4081 /*
4082  * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
4083  * analog demod, which is not I2C controlled like the newer and more common
4084  * TDA9887 series.  Instead it has two tri-state input pins, S0 and S1,
4085  * that control the IF for the video and audio.  Apparently, bttv GPIO
4086  * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
4087  * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
4088  */
4089 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
4090 {
4091
4092         if (btv->audio_input == TVAUDIO_INPUT_TUNER) {
4093                 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
4094                         gpiobits |= 0x10000;
4095                 else
4096                         gpiobits &= ~0x10000;
4097         }
4098
4099         gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4100         return gpiobits;
4101 }
4102
4103
4104 /*
4105  * reset/enable the MSP on some Hauppauge cards
4106  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4107  *
4108  * Hauppauge:  pin  5
4109  * Voodoo:     pin 20
4110  */
4111 static void boot_msp34xx(struct bttv *btv, int pin)
4112 {
4113         int mask = (1 << pin);
4114
4115         gpio_inout(mask,mask);
4116         gpio_bits(mask,0);
4117         mdelay(2);
4118         udelay(500);
4119         gpio_bits(mask,mask);
4120
4121         if (bttv_gpio)
4122                 bttv_gpio_tracking(btv,"msp34xx");
4123         if (bttv_verbose)
4124                 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
4125                         btv->c.nr, pin);
4126 }
4127
4128 /* ----------------------------------------------------------------------- */
4129 /*  Imagenation L-Model PXC200 Framegrabber */
4130 /*  This is basically the same procedure as
4131  *  used by Alessandro Rubini in his pxc200
4132  *  driver, but using BTTV functions */
4133
4134 static void init_PXC200(struct bttv *btv)
4135 {
4136         static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
4137                               0x03, 0x04, 0x05, 0x06, 0x00 };
4138         unsigned int i;
4139         int tmp;
4140         u32 val;
4141
4142         /* Initialise GPIO-connected stuff */
4143         gpio_inout(0xffffff, (1<<13));
4144         gpio_write(0);
4145         udelay(3);
4146         gpio_write(1<<13);
4147         /* GPIO inputs are pulled up, so no need to drive
4148          * reset pin any longer */
4149         gpio_bits(0xffffff, 0);
4150         if (bttv_gpio)
4151                 bttv_gpio_tracking(btv,"pxc200");
4152
4153         /*  we could/should try and reset/control the AD pots? but
4154             right now  we simply  turned off the crushing.  Without
4155             this the AGC drifts drifts
4156             remember the EN is reverse logic -->
4157             setting BT848_ADC_AGC_EN disable the AGC
4158             tboult@eecs.lehigh.edu
4159         */
4160
4161         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4162
4163         /*      Initialise MAX517 DAC */
4164         pr_info("Setting DAC reference voltage level ...\n");
4165         bttv_I2CWrite(btv,0x5E,0,0x80,1);
4166
4167         /*      Initialise 12C508 PIC */
4168         /*      The I2CWrite and I2CRead commands are actually to the
4169          *      same chips - but the R/W bit is included in the address
4170          *      argument so the numbers are different */
4171
4172
4173         pr_info("Initialising 12C508 PIC chip ...\n");
4174
4175         /* First of all, enable the clock line. This is used in the PXC200-F */
4176         val = btread(BT848_GPIO_DMA_CTL);
4177         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4178         btwrite(val, BT848_GPIO_DMA_CTL);
4179
4180         /* Then, push to 0 the reset pin long enough to reset the *
4181          * device same as above for the reset line, but not the same
4182          * value sent to the GPIO-connected stuff
4183          * which one is the good one? */
4184         gpio_inout(0xffffff,(1<<2));
4185         gpio_write(0);
4186         udelay(10);
4187         gpio_write(1<<2);
4188
4189         for (i = 0; i < ARRAY_SIZE(vals); i++) {
4190                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4191                 if (tmp != -1) {
4192                         pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4193                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4194                 }
4195         }
4196
4197         pr_info("PXC200 Initialised\n");
4198 }
4199
4200
4201
4202 /* ----------------------------------------------------------------------- */
4203 /*
4204  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4205  *  it. This apparently involves the following procedure for each 878 chip:
4206  *
4207  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4208  *
4209  *  2)  write to GPIO_DATA
4210  *      - 0x0E
4211  *      - sleep 1ms
4212  *      - 0x10 + 0x0E
4213  *      - sleep 10ms
4214  *      - 0x0E
4215  *     read from GPIO_DATA into buf (uint_32)
4216  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4217  *                 error. ERROR_CPLD_Check_Failed stop.
4218  *
4219  *  3) write to GPIO_DATA
4220  *      - write 0x4400 + 0x0E
4221  *      - sleep 10ms
4222  *      - write 0x4410 + 0x0E
4223  *      - sleep 1ms
4224  *      - write 0x0E
4225  *     read from GPIO_DATA into buf (uint_32)
4226  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4227  *                error. ERROR_CPLD_Check_Failed.
4228  */
4229 /* ----------------------------------------------------------------------- */
4230 static void
4231 init_RTV24 (struct bttv *btv)
4232 {
4233         uint32_t dataRead = 0;
4234         long watchdog_value = 0x0E;
4235
4236         pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4237                 btv->c.nr);
4238
4239         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4240
4241         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4242         msleep (1);
4243         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4244         msleep (10);
4245         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4246
4247         dataRead = btread (BT848_GPIO_DATA);
4248
4249         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4250                 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4251                         btv->c.nr, dataRead);
4252         }
4253
4254         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4255         msleep (10);
4256         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4257         msleep (1);
4258         btwrite (watchdog_value, BT848_GPIO_DATA);
4259         msleep (1);
4260         dataRead = btread (BT848_GPIO_DATA);
4261
4262         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4263                 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4264                         btv->c.nr, dataRead);
4265
4266                 return;
4267         }
4268
4269         pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4270 }
4271
4272
4273
4274 /* ----------------------------------------------------------------------- */
4275 /*
4276  *  The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters
4277  *  the PCI REQ signals coming from the four BT878 chips. After power
4278  *  up, the CPLD does not forward requests to the bus, which prevents
4279  *  the BT878 from fetching RISC instructions from memory. While the
4280  *  CPLD is connected to most of the GPIOs of PCI device 0xD, only
4281  *  five appear to play a role in unlocking the REQ signal. The following
4282  *  sequence has been determined by trial and error without access to the
4283  *  original driver.
4284  *
4285  *  Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out).
4286  *  Devices 0xE and 0xF do not appear to have anything connected to their
4287  *  GPIOs.
4288  *
4289  *  The correct GPIO_OUT_EN value might have some more bits set. It should
4290  *  be possible to derive it from a boundary scan of the CPLD. Its JTAG
4291  *  pins are routed to test points.
4292  *
4293  */
4294 /* ----------------------------------------------------------------------- */
4295 static void
4296 init_PCI8604PW(struct bttv *btv)
4297 {
4298         int state;
4299
4300         if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) {
4301                 pr_warn("This is not a PCI-8604PW\n");
4302                 return;
4303         }
4304
4305         if (PCI_SLOT(btv->c.pci->devfn) != 0xD)
4306                 return;
4307
4308         btwrite(0x080002, BT848_GPIO_OUT_EN);
4309
4310         state = (btread(BT848_GPIO_DATA) >> 21) & 7;
4311
4312         for (;;) {
4313                 switch (state) {
4314                 case 1:
4315                 case 5:
4316                 case 6:
4317                 case 4:
4318                         pr_debug("PCI-8604PW in state %i, toggling pin\n",
4319                                  state);
4320                         btwrite(0x080000, BT848_GPIO_DATA);
4321                         msleep(1);
4322                         btwrite(0x000000, BT848_GPIO_DATA);
4323                         msleep(1);
4324                         break;
4325                 case 7:
4326                         pr_info("PCI-8604PW unlocked\n");
4327                         return;
4328                 case 0:
4329                         /* FIXME: If we are in state 7 and toggle GPIO[19] one
4330                            more time, the CPLD goes into state 0, where PCI bus
4331                            mastering is inhibited again. We have not managed to
4332                            get out of that state. */
4333
4334                         pr_err("PCI-8604PW locked until reset\n");
4335                         return;
4336                 default:
4337                         pr_err("PCI-8604PW in unknown state %i\n", state);
4338                         return;
4339                 }
4340
4341                 state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7);
4342
4343                 switch (state) {
4344                 case 0x15:
4345                 case 0x56:
4346                 case 0x64:
4347                 case 0x47:
4348                 /* The transition from state 7 to state 0 is, as explained
4349                    above, valid but undesired and with this code impossible
4350                    as we exit as soon as we are in state 7.
4351                 case 0x70: */
4352                         break;
4353                 default:
4354                         pr_err("PCI-8604PW invalid transition %i -> %i\n",
4355                                state >> 4, state & 7);
4356                         return;
4357                 }
4358                 state &= 7;
4359         }
4360 }
4361
4362 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4363  *
4364  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4365  * switch instead (CD22M3494E). This IC can have multiple active connections
4366  * between Xn (input) and Yn (output) pins. We need to clear any existing
4367  * connection prior to establish a new one, pulsing the STROBE pin.
4368  *
4369  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4370  * GPIO pins are wired as:
4371  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4372  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4373  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4374  *  GPIO[8]   -                  - P3[5] (microcontroller)
4375  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4376  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4377  *  GPINTR    -                  - P3[4] (microcontroller)
4378  *
4379  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4380  * configuration either directly (as we are doing) or using the microcontroller
4381  * which is also wired to I2C interface. I have no further info on the
4382  * microcontroller features, one would need to disassembly the firmware.
4383  * note: the vendor refused to give any information on this product, all
4384  *       that stuff was found using a multimeter! :)
4385  */
4386 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4387 {
4388         static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4389                                       0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4390
4391         gpio_bits(0x07f, muxgpio[input]);
4392
4393         /* reset all connections */
4394         gpio_bits(0x200,0x200);
4395         mdelay(1);
4396         gpio_bits(0x200,0x000);
4397         mdelay(1);
4398
4399         /* create a new connection */
4400         gpio_bits(0x480,0x480);
4401         mdelay(1);
4402         gpio_bits(0x480,0x080);
4403         mdelay(1);
4404 }
4405
4406 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4407  *
4408  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4409  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4410  * chips, ten eight input analog multiplexors, a not chip and a few
4411  * other components.
4412  *
4413  * 16 inputs on a secondary bracket are provided and can be selected
4414  * from each of the four capture chips.  Two of the eight input
4415  * multiplexors are used to select from any of the 16 input signals.
4416  *
4417  * Unsupported hardware capabilities:
4418  *  . A video output monitor on the secondary bracket can be selected from
4419  *    one of the 878A chips.
4420  *  . Another passthrough but I haven't spent any time investigating it.
4421  *  . Digital I/O (logic level connected to GPIO) is available from an
4422  *    onboard header.
4423  *
4424  * The on chip input mux should always be set to 2.
4425  * GPIO[16:19] - Video input selection
4426  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4427  * GPIO[?:?]   - Digital I/O.
4428  *
4429  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4430  * determined what function (if any) it provides.  With the microcontroller
4431  * and sync separator chips a guess is that it might have to do with video
4432  * switching and maybe some digital I/O.
4433  */
4434 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4435 {
4436         /* video mux */
4437         gpio_bits(0x0f0000, input << 16);
4438 }
4439
4440 static void tibetCS16_init(struct bttv *btv)
4441 {
4442         /* enable gpio bits, mask obtained via btSpy */
4443         gpio_inout(0xffffff, 0x0f7fff);
4444         gpio_write(0x0f7fff);
4445 }
4446
4447 /*
4448  * The following routines for the Kodicom-4400r get a little mind-twisting.
4449  * There is a "master" controller and three "slave" controllers, together
4450  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4451  * The analog switch is controlled by the "master", but the detection order
4452  * of the four BT878A chips is in an order which I just don't understand.
4453  * The "master" is actually the second controller to be detected.  The
4454  * logic on the board uses logical numbers for the 4 controllers, but
4455  * those numbers are different from the detection sequence.  When working
4456  * with the analog switch, we need to "map" from the detection sequence
4457  * over to the board's logical controller number.  This mapping sequence
4458  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4459  * unit 3, the second (which is the master) is logical unit 0, etc.
4460  * We need to maintain the status of the analog switch (which of the 16
4461  * cameras is connected to which of the 4 controllers) in sw_status array.
4462  */
4463
4464 /*
4465  * First a routine to set the analog switch, which controls which camera
4466  * is routed to which controller.  The switch comprises an X-address
4467  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4468  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4469  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4470  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4471  * specified address.  The idea is to set the address and data, then bring
4472  * STROBE high, and finally bring STROBE back to low.
4473  */
4474 static void kodicom4400r_write(struct bttv *btv,
4475                                unsigned char xaddr,
4476                                unsigned char yaddr,
4477                                unsigned char data) {
4478         unsigned int udata;
4479
4480         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4481         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4482         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4483         gpio_bits(0x1ff, udata);                /* strobe low */
4484 }
4485
4486 /*
4487  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4488  * use this routine.  The routine finds the "master" for the card, maps
4489  * the controller number from the detected position over to the logical
4490  * number, writes the appropriate data to the analog switch, and housekeeps
4491  * the local copy of the switch information.  The parameter 'input' is the
4492  * requested camera number (0 - 15).
4493  */
4494 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4495 {
4496         int xaddr, yaddr;
4497         struct bttv *mctlr;
4498         static unsigned char map[4] = {3, 0, 2, 1};
4499
4500         mctlr = master[btv->c.nr];
4501         if (mctlr == NULL) {    /* ignore if master not yet detected */
4502                 return;
4503         }
4504         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4505         yaddr = map[yaddr];
4506         xaddr = input & 0xf;
4507         /* Check if the controller/camera pair has changed, else ignore */
4508         if (mctlr->sw_status[yaddr] != xaddr)
4509         {
4510                 /* "open" the old switch, "close" the new one, save the new */
4511                 kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4512                 mctlr->sw_status[yaddr] = xaddr;
4513                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4514         }
4515 }
4516
4517 /*
4518  * During initialisation, we need to reset the analog switch.  We
4519  * also preset the switch to map the 4 connectors on the card to the
4520  * *user's* (see above description of kodicom4400r_muxsel) channels
4521  * 0 through 3
4522  */
4523 static void kodicom4400r_init(struct bttv *btv)
4524 {
4525         int ix;
4526
4527         gpio_inout(0x0003ff, 0x0003ff);
4528         gpio_write(1 << 9);     /* reset MUX */
4529         gpio_write(0);
4530         /* Preset camera 0 to the 4 controllers */
4531         for (ix = 0; ix < 4; ix++) {
4532                 btv->sw_status[ix] = ix;
4533                 kodicom4400r_write(btv, ix, ix, 1);
4534         }
4535         /*
4536          * Since this is the "master", we need to set up the
4537          * other three controller chips' pointers to this structure
4538          * for later use in the muxsel routine.
4539          */
4540         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4541             return;
4542         master[btv->c.nr-1] = btv;
4543         master[btv->c.nr]   = btv;
4544         master[btv->c.nr+1] = btv;
4545         master[btv->c.nr+2] = btv;
4546 }
4547
4548 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4549  * video multiplexers to provide up to 16 video inputs. These
4550  * multiplexers are controlled by the lower 8 GPIO pins of the
4551  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4552
4553  * xxx0 is pin xxx of multiplexer U5,
4554  * yyy1 is pin yyy of multiplexer U2
4555  */
4556 #define ENA0    0x01
4557 #define ENB0    0x02
4558 #define ENA1    0x04
4559 #define ENB1    0x08
4560
4561 #define IN10    0x10
4562 #define IN00    0x20
4563 #define IN11    0x40
4564 #define IN01    0x80
4565
4566 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4567 {
4568         static const int masks[] = {
4569                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4570                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4571                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4572                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4573         };
4574         gpio_write(masks[input%16]);
4575 }
4576 static void picolo_tetra_init(struct bttv *btv)
4577 {
4578         /*This is the video input redirection functionality : I DID NOT USE IT. */
4579         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4580         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4581 }
4582 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4583 {
4584
4585         dprintk("%d : picolo_tetra_muxsel =>  input = %d\n", btv->c.nr, input);
4586         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4587         /*GPIO[20]&GPIO[21] used to choose the right input*/
4588         btwrite (input<<20,BT848_GPIO_DATA);
4589
4590 }
4591
4592 /*
4593  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4594  *
4595  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4596  * switchers to provide 16 channels to MUX0. The TDA8540's have
4597  * 4 independent outputs and as such the IVC120G also has the
4598  * optional "Monitor Out" bus. This allows the card to be looking
4599  * at one input while the monitor is looking at another.
4600  *
4601  * Since I've couldn't be bothered figuring out how to add an
4602  * independent muxsel for the monitor bus, I've just set it to
4603  * whatever the card is looking at.
4604  *
4605  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4606  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4607  *
4608  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4609  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4610  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4611  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4612  *
4613  */
4614
4615 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4616 #define I2C_TDA8540        0x90
4617 #define I2C_TDA8540_ALT1   0x92
4618 #define I2C_TDA8540_ALT2   0x94
4619 #define I2C_TDA8540_ALT3   0x96
4620 #define I2C_TDA8540_ALT4   0x98
4621 #define I2C_TDA8540_ALT5   0x9a
4622 #define I2C_TDA8540_ALT6   0x9c
4623
4624 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4625 {
4626         /* Simple maths */
4627         int key = input % 4;
4628         int matrix = input / 4;
4629
4630         dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4631                 btv->c.nr, input, matrix, key);
4632
4633         /* Handles the input selection on the TDA8540's */
4634         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4635                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4636         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4637                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4638         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4639                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4640         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4641                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4642
4643         /* Handles the output enables on the TDA8540's */
4644         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4645                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4646         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4647                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4648         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4649                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4650         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4651                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4652
4653         /* 878's MUX0 is already selected for input via muxsel values */
4654 }
4655
4656
4657 /* PXC200 muxsel helper
4658  * luke@syseng.anu.edu.au
4659  * another transplant
4660  * from Alessandro Rubini (rubini@linux.it)
4661  *
4662  * There are 4 kinds of cards:
4663  * PXC200L which is bt848
4664  * PXC200F which is bt848 with PIC controlling mux
4665  * PXC200AL which is bt878
4666  * PXC200AF which is bt878 with PIC controlling mux
4667  */
4668 #define PX_CFG_PXC200F 0x01
4669 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4670 #define PX_I2C_PIC       0x0f
4671 #define PX_PXC200A_CARDID 0x200a1295
4672 #define PX_I2C_CMD_CFG   0x00
4673
4674 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4675 {
4676         int rc;
4677         long mux;
4678         int bitmask;
4679         unsigned char buf[2];
4680
4681         /* Read PIC config to determine if this is a PXC200F */
4682         /* PX_I2C_CMD_CFG*/
4683         buf[0]=0;
4684         buf[1]=0;
4685         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4686         if (rc) {
4687                 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4688                          btv->c.nr, rc);
4689           /* not PXC ? do nothing */
4690                 return;
4691         }
4692
4693         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4694         if (!(rc & PX_CFG_PXC200F)) {
4695                 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4696                          btv->c.nr, rc);
4697                 return;
4698         }
4699
4700
4701         /* The multiplexer in the 200F is handled by the GPIO port */
4702         /* get correct mapping between inputs  */
4703         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4704         /* ** not needed!?   */
4705         mux = input;
4706
4707         /* make sure output pins are enabled */
4708         /* bitmask=0x30f; */
4709         bitmask=0x302;
4710         /* check whether we have a PXC200A */
4711         if (btv->cardid == PX_PXC200A_CARDID)  {
4712            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4713            bitmask |= 7<<4; /* the DAC */
4714         }
4715         btwrite(bitmask, BT848_GPIO_OUT_EN);
4716
4717         bitmask = btread(BT848_GPIO_DATA);
4718         if (btv->cardid == PX_PXC200A_CARDID)
4719           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4720         else /* older device */
4721           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4722         btwrite(bitmask,BT848_GPIO_DATA);
4723
4724         /*
4725          * Was "to be safe, set the bt848 to input 0"
4726          * Actually, since it's ok at load time, better not messing
4727          * with these bits (on PXC200AF you need to set mux 2 here)
4728          *
4729          * needed because bttv-driver sets mux before calling this function
4730          */
4731         if (btv->cardid == PX_PXC200A_CARDID)
4732           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4733         else /* older device */
4734           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4735
4736         pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4737 }
4738
4739 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4740 {
4741         unsigned int mux = input % 4;
4742
4743         if (input == btv->svhs)
4744                 mux = 0;
4745
4746         gpio_bits(0x3, mux);
4747 }
4748
4749 /*
4750  * GeoVision GV-800(S) functions
4751  * Bruno Christo <bchristo@inf.ufsm.br>
4752 */
4753
4754 /* This is a function to control the analog switch, which determines which
4755  * camera is routed to which controller.  The switch comprises an X-address
4756  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4757  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4758  * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4759  * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4760  * specified address. There is also a chip select (gpio bit 16).
4761  * The idea is to set the address and chip select together, bring
4762  * STROBE high, write the data, and finally bring STROBE back to low.
4763  */
4764 static void gv800s_write(struct bttv *btv,
4765                          unsigned char xaddr,
4766                          unsigned char yaddr,
4767                          unsigned char data) {
4768         /* On the "master" 878A:
4769         * GPIO bits 0-9 are used for the analog switch:
4770         *   00 - 03:    camera selector
4771         *   04 - 06:    878A (controller) selector
4772         *   16:         cselect
4773         *   17:         strobe
4774         *   18:         data (1->on, 0->off)
4775         *   19:         reset
4776         */
4777         const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4778         const u32 CSELECT = 1<<16;
4779         const u32 STROBE = 1<<17;
4780         const u32 DATA = data<<18;
4781
4782         gpio_bits(0x1007f, ADDRESS | CSELECT);  /* write ADDRESS and CSELECT */
4783         gpio_bits(0x20000, STROBE);             /* STROBE high */
4784         gpio_bits(0x40000, DATA);               /* write DATA */
4785         gpio_bits(0x20000, ~STROBE);            /* STROBE low */
4786 }
4787
4788 /*
4789  * GeoVision GV-800(S) muxsel
4790  *
4791  * Each of the 4 cards (controllers) use this function.
4792  * The controller using this function selects the input through the GPIO pins
4793  * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4794  *
4795  * The parameter 'input' is the requested camera number (0-4) on the controller.
4796  * The map array has the address of each input. Note that the addresses in the
4797  * array are in the sequence the original GeoVision driver uses, that is, set
4798  * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4799  * the physical "camera 1" connector corresponds to controller 0 input 0,
4800  * "camera 2" corresponds to controller 1 input 0, and so on.
4801  *
4802  * After getting the input address, the function then writes the appropriate
4803  * data to the analog switch, and housekeeps the local copy of the switch
4804  * information.
4805  */
4806 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4807 {
4808         struct bttv *mctlr;
4809         int xaddr, yaddr;
4810         static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4811                                           { 0x1, 0x5, 0xb, 0x7 },
4812                                           { 0x2, 0x8, 0xc, 0xe },
4813                                           { 0x3, 0x9, 0xd, 0xf } };
4814         input = input%4;
4815         mctlr = master[btv->c.nr];
4816         if (mctlr == NULL) {
4817                 /* do nothing until the "master" is detected */
4818                 return;
4819         }
4820         yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4821         xaddr = map[yaddr][input] & 0xf;
4822
4823         /* Check if the controller/camera pair has changed, ignore otherwise */
4824         if (mctlr->sw_status[yaddr] != xaddr) {
4825                 /* disable the old switch, enable the new one and save status */
4826                 gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4827                 mctlr->sw_status[yaddr] = xaddr;
4828                 gv800s_write(mctlr, xaddr, yaddr, 1);
4829         }
4830 }
4831
4832 /* GeoVision GV-800(S) "master" chip init */
4833 static void gv800s_init(struct bttv *btv)
4834 {
4835         int ix;
4836
4837         gpio_inout(0xf107f, 0xf107f);
4838         gpio_write(1<<19); /* reset the analog MUX */
4839         gpio_write(0);
4840
4841         /* Preset camera 0 to the 4 controllers */
4842         for (ix = 0; ix < 4; ix++) {
4843                 btv->sw_status[ix] = ix;
4844                 gv800s_write(btv, ix, ix, 1);
4845         }
4846
4847         /* Inputs on the "master" controller need this brightness fix */
4848         bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4849
4850         if (btv->c.nr > BTTV_MAX-4)
4851                 return;
4852         /*
4853          * Store the "master" controller pointer in the master
4854          * array for later use in the muxsel function.
4855          */
4856         master[btv->c.nr]   = btv;
4857         master[btv->c.nr+1] = btv;
4858         master[btv->c.nr+2] = btv;
4859         master[btv->c.nr+3] = btv;
4860 }
4861
4862 /* ----------------------------------------------------------------------- */
4863 /* motherboard chipset specific stuff                                      */
4864
4865 void __init bttv_check_chipset(void)
4866 {
4867         struct pci_dev *dev = NULL;
4868
4869         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4870                 triton1 = 1;
4871         if (pci_pci_problems & PCIPCI_VSFX)
4872                 vsfx = 1;
4873 #ifdef PCIPCI_ALIMAGIK
4874         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4875                 latency = 0x0A;
4876 #endif
4877
4878
4879         /* print warnings about any quirks found */
4880         if (triton1)
4881                 pr_info("Host bridge needs ETBF enabled\n");
4882         if (vsfx)
4883                 pr_info("Host bridge needs VSFX enabled\n");
4884         if (UNSET != latency)
4885                 pr_info("pci latency fixup [%d]\n", latency);
4886         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4887                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4888                 unsigned char b;
4889                 pci_read_config_byte(dev, 0x53, &b);
4890                 if (bttv_debug)
4891                         pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4892                                 b);
4893         }
4894 }
4895
4896 int bttv_handle_chipset(struct bttv *btv)
4897 {
4898         unsigned char command;
4899
4900         if (!triton1 && !vsfx && UNSET == latency)
4901                 return 0;
4902
4903         if (bttv_verbose) {
4904                 if (triton1)
4905                         pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4906                                 btv->c.nr);
4907                 if (vsfx && btv->id >= 878)
4908                         pr_info("%d: enabling VSFX\n", btv->c.nr);
4909                 if (UNSET != latency)
4910                         pr_info("%d: setting pci timer to %d\n",
4911                                 btv->c.nr, latency);
4912         }
4913
4914         if (btv->id < 878) {
4915                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4916                 if (triton1)
4917                         btv->triton1 = BT848_INT_ETBF;
4918         } else {
4919                 /* bt878 has a bit in the pci config space for it */
4920                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4921                 if (triton1)
4922                         command |= BT878_EN_TBFX;
4923                 if (vsfx)
4924                         command |= BT878_EN_VSFX;
4925                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4926         }
4927         if (UNSET != latency)
4928                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4929         return 0;
4930 }