drivers/media/pci/bt8xx/bttv-cards.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3
   4     bttv-cards.c
   5
   6     this file has configuration information - card-specific stuff
   7     like the big tvcards array for the most part
   8
   9     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
  10                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  11     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  12
  13
  14 */
  15
  16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  17
  18 #include <linux/delay.h>
  19 #include <linux/module.h>
  20 #include <linux/kmod.h>
  21 #include <linux/init.h>
  22 #include <linux/pci.h>
  23 #include <linux/vmalloc.h>
  24 #include <linux/firmware.h>
  25 #include <net/checksum.h>
  26
  27 #include <asm/unaligned.h>
  28 #include <asm/io.h>
  29
  30 #include "bttvp.h"
  31 #include <media/v4l2-common.h>
  32 #include <media/i2c/tvaudio.h>
  33 #include "bttv-audio-hook.h"
  34
  35 /* fwd decl */
  36 static void boot_msp34xx(struct bttv *btv, int pin);
  37 static void hauppauge_eeprom(struct bttv *btv);
  38 static void avermedia_eeprom(struct bttv *btv);
  39 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  40 static void modtec_eeprom(struct bttv *btv);
  41 static void init_PXC200(struct bttv *btv);
  42 static void init_RTV24(struct bttv *btv);
  43 static void init_PCI8604PW(struct bttv *btv);
  44
  45 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  46 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  47 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  48 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  49 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  50
  51 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  52
  53 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  54 static void picolo_tetra_init(struct bttv *btv);
  55
  56 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  57 static void tibetCS16_init(struct bttv *btv);
  58
  59 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  60 static void kodicom4400r_init(struct bttv *btv);
  61
  62 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  63 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  64
  65 static void geovision_muxsel(struct bttv *btv, unsigned int input);
  66
  67 static void phytec_muxsel(struct bttv *btv, unsigned int input);
  68
  69 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
  70 static void gv800s_init(struct bttv *btv);
  71
  72 static void td3116_muxsel(struct bttv *btv, unsigned int input);
  73
  74 static int terratec_active_radio_upgrade(struct bttv *btv);
  75 static int tea575x_init(struct bttv *btv);
  76 static void identify_by_eeprom(struct bttv *btv,
  77                                unsigned char eeprom_data[256]);
  78 static int pvr_boot(struct bttv *btv);
  79
  80 /* config variables */
  81 static unsigned int triton1;
  82 static unsigned int vsfx;
  83 static unsigned int latency = UNSET;
  84 int no_overlay=-1;
  85
  86 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  87 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  88 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  89 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  90 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  91 static unsigned int audiodev[BTTV_MAX];
  92 static unsigned int saa6588[BTTV_MAX];
  93 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
  94 static unsigned int autoload = UNSET;
  95 static unsigned int gpiomask = UNSET;
  96 static unsigned int audioall = UNSET;
  97 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
  98
  99 /* insmod options */
 100 module_param(triton1,    int, 0444);
 101 module_param(vsfx,       int, 0444);
 102 module_param(no_overlay, int, 0444);
 103 module_param(latency,    int, 0444);
 104 module_param(gpiomask,   int, 0444);
 105 module_param(audioall,   int, 0444);
 106 module_param(autoload,   int, 0444);
 107
 108 module_param_array(card,     int, NULL, 0444);
 109 module_param_array(pll,      int, NULL, 0444);
 110 module_param_array(tuner,    int, NULL, 0444);
 111 module_param_array(svhs,     int, NULL, 0444);
 112 module_param_array(remote,   int, NULL, 0444);
 113 module_param_array(audiodev, int, NULL, 0444);
 114 module_param_array(audiomux, int, NULL, 0444);
 115
 116 MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]");
 117 MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]");
 118 MODULE_PARM_DESC(latency,"pci latency timer");
 119 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 120 MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");
 121 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 122 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
 123 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 124                 "\t\t-1 = no audio\n"
 125                 "\t\t 0 = autodetect (default)\n"
 126                 "\t\t 1 = msp3400\n"
 127                 "\t\t 2 = tda7432\n"
 128                 "\t\t 3 = tvaudio");
 129 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 130 MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
 131
 132
 133 /* I2C addresses list */
 134 #define I2C_ADDR_TDA7432        0x8a
 135 #define I2C_ADDR_MSP3400        0x80
 136 #define I2C_ADDR_MSP3400_ALT    0x88
 137
 138
 139 /* ----------------------------------------------------------------------- */
 140 /* list of card IDs for bt878+ cards                                       */
 141
 142 static struct CARD {
 143         unsigned id;
 144         int cardnr;
 145         char *name;
 146 } cards[] = {
 147         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 148         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 149         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 150         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 151         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 152         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 153         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 154         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 155         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 156
 157         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 158         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 159
 160         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 161         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 162         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 163         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 164         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 165         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 166         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 167         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 168         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 169
 170         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 171         /* some cards ship with byteswapped IDs ... */
 172         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 173         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 174         /* this seems to happen as well ... */
 175         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 176
 177         { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 178         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 179         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 180
 181         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 182         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 183         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 184         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 185         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 186         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 187         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 188
 189         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 190         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 191         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 192         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 193         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 194
 195         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 196         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 197         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 198         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 199
 200         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 201         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 202         /* clashes with FlyVideo
 203          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 204         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 205         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 206         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 207         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 208
 209         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 210         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 211         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 212         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 213         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 214
 215         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 216         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 217         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 218         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 219         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 220
 221         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 222         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 223         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 224         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 225
 226         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 227         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 228         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 229         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 230
 231         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 232         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 233         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 234         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 235         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 236         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 237         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 238         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 239         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 240         { 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
 241         { 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
 242         { 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
 243         { 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
 244         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 245         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 246         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 247         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 248         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 249         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 250         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 251         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 252         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 253         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 254         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 255         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 256         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 257         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 258         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 259         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 260         { 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 261         { 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 262         { 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 263         { 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 264
 265         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 266         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 267
 268         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 269         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 270         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 271         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 272         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 273         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 274
 275         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 276         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 277
 278         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 279         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 280         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 281         { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
 282         { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
 283         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 284         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 285         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 286         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 287         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 288
 289         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 290         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 291
 292         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 293         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 294         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 295         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 296
 297         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 298
 299         { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 300         { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 301
 302         /* likely broken, vendor id doesn't match the other magic views ...
 303          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 304
 305         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 306         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 307
 308         { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,  "Conceptronic CTVFMi v2"},
 309
 310         /* DVB cards (using pci function .1 for mpeg data xfer) */
 311         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 312         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 313         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 314         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 315         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 316         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 317         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 318         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 319         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 320         { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 321         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 322         { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 323         { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 324         { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
 325         { 0x18011000, BTTV_BOARD_ENLTV_FM_2,    "Encore ENL TV-FM-2" },
 326         { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
 327         { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 328         { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 329         { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 330
 331         { 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
 332         { 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
 333         { 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
 334         { 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
 335         { 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
 336         { 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
 337         { 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
 338         { 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
 339         { 0x3116f200, BTTV_BOARD_TVT_TD3116,    "Tongwei Video Technology TD-3116" },
 340         { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
 341         { 0, -1, NULL }
 342 };
 343
 344 /* ----------------------------------------------------------------------- */
 345 /* array with description for bt848 / bt878 tv/grabber cards               */
 346
 347 struct tvcard bttv_tvcards[] = {
 348         /* ---- card 0x00 ---------------------------------- */
 349         [BTTV_BOARD_UNKNOWN] = {
 350                 .name           = " *** UNKNOWN/GENERIC *** ",
 351                 .video_inputs   = 4,
 352                 .svhs           = 2,
 353                 .muxsel         = MUXSEL(2, 3, 1, 0),
 354                 .tuner_type     = UNSET,
 355                 .tuner_addr     = ADDR_UNSET,
 356         },
 357         [BTTV_BOARD_MIRO] = {
 358                 .name           = "MIRO PCTV",
 359                 .video_inputs   = 4,
 360                 /* .audio_inputs= 1, */
 361                 .svhs           = 2,
 362                 .gpiomask       = 15,
 363                 .muxsel         = MUXSEL(2, 3, 1, 1),
 364                 .gpiomux        = { 2, 0, 0, 0 },
 365                 .gpiomute       = 10,
 366                 .tuner_type     = UNSET,
 367                 .tuner_addr     = ADDR_UNSET,
 368         },
 369         [BTTV_BOARD_HAUPPAUGE] = {
 370                 .name           = "Hauppauge (bt848)",
 371                 .video_inputs   = 4,
 372                 /* .audio_inputs= 1, */
 373                 .svhs           = 2,
 374                 .gpiomask       = 7,
 375                 .muxsel         = MUXSEL(2, 3, 1, 1),
 376                 .gpiomux        = { 0, 1, 2, 3 },
 377                 .gpiomute       = 4,
 378                 .tuner_type     = UNSET,
 379                 .tuner_addr     = ADDR_UNSET,
 380         },
 381         [BTTV_BOARD_STB] = {
 382                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 383                 .video_inputs   = 3,
 384                 /* .audio_inputs= 1, */
 385                 .svhs           = 2,
 386                 .gpiomask       = 7,
 387                 .muxsel         = MUXSEL(2, 3, 1, 1),
 388                 .gpiomux        = { 4, 0, 2, 3 },
 389                 .gpiomute       = 1,
 390                 .no_msp34xx     = 1,
 391                 .tuner_type     = TUNER_PHILIPS_NTSC,
 392                 .tuner_addr     = ADDR_UNSET,
 393                 .pll            = PLL_28,
 394                 .has_radio      = 1,
 395         },
 396
 397         /* ---- card 0x04 ---------------------------------- */
 398         [BTTV_BOARD_INTEL] = {
 399                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 400                 .video_inputs   = 4,
 401                 /* .audio_inputs= 0, */
 402                 .svhs           = 2,
 403                 .gpiomask       = 0,
 404                 .muxsel         = MUXSEL(2, 3, 1, 1),
 405                 .gpiomux        = { 0 },
 406                 .tuner_type     = TUNER_ABSENT,
 407                 .tuner_addr     = ADDR_UNSET,
 408         },
 409         [BTTV_BOARD_DIAMOND] = {
 410                 .name           = "Diamond DTV2000",
 411                 .video_inputs   = 4,
 412                 /* .audio_inputs= 1, */
 413                 .svhs           = 2,
 414                 .gpiomask       = 3,
 415                 .muxsel         = MUXSEL(2, 3, 1, 0),
 416                 .gpiomux        = { 0, 1, 0, 1 },
 417                 .gpiomute       = 3,
 418                 .tuner_type     = UNSET,
 419                 .tuner_addr     = ADDR_UNSET,
 420         },
 421         [BTTV_BOARD_AVERMEDIA] = {
 422                 .name           = "AVerMedia TVPhone",
 423                 .video_inputs   = 3,
 424                 /* .audio_inputs= 1, */
 425                 .svhs           = 3,
 426                 .muxsel         = MUXSEL(2, 3, 1, 1),
 427                 .gpiomask       = 0x0f,
 428                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 429                 /*                0x04 for some cards ?? */
 430                 .tuner_type     = UNSET,
 431                 .tuner_addr     = ADDR_UNSET,
 432                 .audio_mode_gpio= avermedia_tvphone_audio,
 433                 .has_remote     = 1,
 434         },
 435         [BTTV_BOARD_MATRIX_VISION] = {
 436                 .name           = "MATRIX-Vision MV-Delta",
 437                 .video_inputs   = 5,
 438                 /* .audio_inputs= 1, */
 439                 .svhs           = 3,
 440                 .gpiomask       = 0,
 441                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 442                 .gpiomux        = { 0 },
 443                 .tuner_type     = TUNER_ABSENT,
 444                 .tuner_addr     = ADDR_UNSET,
 445         },
 446
 447         /* ---- card 0x08 ---------------------------------- */
 448         [BTTV_BOARD_FLYVIDEO] = {
 449                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 450                 .video_inputs   = 4,
 451                 /* .audio_inputs= 1, */
 452                 .svhs           = 2,
 453                 .gpiomask       = 0xc00,
 454                 .muxsel         = MUXSEL(2, 3, 1, 1),
 455                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 456                 .gpiomute       = 0xc00,
 457                 .pll            = PLL_28,
 458                 .tuner_type     = UNSET,
 459                 .tuner_addr     = ADDR_UNSET,
 460         },
 461         [BTTV_BOARD_TURBOTV] = {
 462                 .name           = "IMS/IXmicro TurboTV",
 463                 .video_inputs   = 3,
 464                 /* .audio_inputs= 1, */
 465                 .svhs           = 2,
 466                 .gpiomask       = 3,
 467                 .muxsel         = MUXSEL(2, 3, 1, 1),
 468                 .gpiomux        = { 1, 1, 2, 3 },
 469                 .pll            = PLL_28,
 470                 .tuner_type     = TUNER_TEMIC_PAL,
 471                 .tuner_addr     = ADDR_UNSET,
 472         },
 473         [BTTV_BOARD_HAUPPAUGE878] = {
 474                 .name           = "Hauppauge (bt878)",
 475                 .video_inputs   = 4,
 476                 /* .audio_inputs= 1, */
 477                 .svhs           = 2,
 478                 .gpiomask       = 0x0f, /* old: 7 */
 479                 .muxsel         = MUXSEL(2, 0, 1, 1),
 480                 .gpiomux        = { 0, 1, 2, 3 },
 481                 .gpiomute       = 4,
 482                 .pll            = PLL_28,
 483                 .tuner_type     = UNSET,
 484                 .tuner_addr     = ADDR_UNSET,
 485         },
 486         [BTTV_BOARD_MIROPRO] = {
 487                 .name           = "MIRO PCTV pro",
 488                 .video_inputs   = 3,
 489                 /* .audio_inputs= 1, */
 490                 .svhs           = 2,
 491                 .gpiomask       = 0x3014f,
 492                 .muxsel         = MUXSEL(2, 3, 1, 1),
 493                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
 494                 .gpiomute       = 10,
 495                 .tuner_type     = UNSET,
 496                 .tuner_addr     = ADDR_UNSET,
 497         },
 498
 499         /* ---- card 0x0c ---------------------------------- */
 500         [BTTV_BOARD_ADSTECH_TV] = {
 501                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 502                 .video_inputs   = 3,
 503                 /* .audio_inputs= 1, */
 504                 .svhs           = 2,
 505                 .gpiomask       = 15,
 506                 .muxsel         = MUXSEL(2, 3, 1, 1),
 507                 .gpiomux        = { 13, 14, 11, 7 },
 508                 .tuner_type     = UNSET,
 509                 .tuner_addr     = ADDR_UNSET,
 510         },
 511         [BTTV_BOARD_AVERMEDIA98] = {
 512                 .name           = "AVerMedia TVCapture 98",
 513                 .video_inputs   = 3,
 514                 /* .audio_inputs= 4, */
 515                 .svhs           = 2,
 516                 .gpiomask       = 15,
 517                 .muxsel         = MUXSEL(2, 3, 1, 1),
 518                 .gpiomux        = { 13, 14, 11, 7 },
 519                 .msp34xx_alt    = 1,
 520                 .pll            = PLL_28,
 521                 .tuner_type     = TUNER_PHILIPS_PAL,
 522                 .tuner_addr     = ADDR_UNSET,
 523                 .audio_mode_gpio= avermedia_tv_stereo_audio,
 524                 .no_gpioirq     = 1,
 525         },
 526         [BTTV_BOARD_VHX] = {
 527                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 528                 .video_inputs   = 3,
 529                 /* .audio_inputs= 1, */
 530                 .svhs           = 2,
 531                 .gpiomask       = 7,
 532                 .muxsel         = MUXSEL(2, 3, 1, 1),
 533                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 534                 .gpiomute       = 4,
 535                 .pll            = PLL_28,
 536                 .tuner_type     = UNSET,
 537                 .tuner_addr     = ADDR_UNSET,
 538         },
 539         [BTTV_BOARD_ZOLTRIX] = {
 540                 .name           = "Zoltrix TV-Max",
 541                 .video_inputs   = 3,
 542                 /* .audio_inputs= 1, */
 543                 .svhs           = 2,
 544                 .gpiomask       = 15,
 545                 .muxsel         = MUXSEL(2, 3, 1, 1),
 546                 .gpiomux        = { 0, 0, 1, 0 },
 547                 .gpiomute       = 10,
 548                 .tuner_type     = UNSET,
 549                 .tuner_addr     = ADDR_UNSET,
 550         },
 551
 552         /* ---- card 0x10 ---------------------------------- */
 553         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 554                 .name           = "Prolink Pixelview PlayTV (bt878)",
 555                 .video_inputs   = 3,
 556                 /* .audio_inputs= 1, */
 557                 .svhs           = 2,
 558                 .gpiomask       = 0x01fe00,
 559                 .muxsel         = MUXSEL(2, 3, 1, 1),
 560                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 561                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 562                 .gpiomute       = 0x002000,
 563                 .pll            = PLL_28,
 564                 .tuner_type     = UNSET,
 565                 .tuner_addr     = ADDR_UNSET,
 566         },
 567         [BTTV_BOARD_WINVIEW_601] = {
 568                 .name           = "Leadtek WinView 601",
 569                 .video_inputs   = 3,
 570                 /* .audio_inputs= 1, */
 571                 .svhs           = 2,
 572                 .gpiomask       = 0x8300f8,
 573                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 574                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 575                 .gpiomute       = 0xcfa007,
 576                 .tuner_type     = UNSET,
 577                 .tuner_addr     = ADDR_UNSET,
 578                 .volume_gpio    = winview_volume,
 579                 .has_radio      = 1,
 580         },
 581         [BTTV_BOARD_AVEC_INTERCAP] = {
 582                 .name           = "AVEC Intercapture",
 583                 .video_inputs   = 3,
 584                 /* .audio_inputs= 2, */
 585                 .svhs           = 2,
 586                 .gpiomask       = 0,
 587                 .muxsel         = MUXSEL(2, 3, 1, 1),
 588                 .gpiomux        = { 1, 0, 0, 0 },
 589                 .tuner_type     = UNSET,
 590                 .tuner_addr     = ADDR_UNSET,
 591         },
 592         [BTTV_BOARD_LIFE_FLYKIT] = {
 593                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 594                 .video_inputs   = 4,
 595                 /* .audio_inputs= 1, */
 596                 .svhs           = NO_SVHS,
 597                 .gpiomask       = 0x8dff00,
 598                 .muxsel         = MUXSEL(2, 3, 1, 1),
 599                 .gpiomux        = { 0 },
 600                 .no_msp34xx     = 1,
 601                 .tuner_type     = TUNER_ABSENT,
 602                 .tuner_addr     = ADDR_UNSET,
 603         },
 604
 605         /* ---- card 0x14 ---------------------------------- */
 606         [BTTV_BOARD_CEI_RAFFLES] = {
 607                 .name           = "CEI Raffles Card",
 608                 .video_inputs   = 3,
 609                 /* .audio_inputs= 3, */
 610                 .svhs           = 2,
 611                 .muxsel         = MUXSEL(2, 3, 1, 1),
 612                 .tuner_type     = UNSET,
 613                 .tuner_addr     = ADDR_UNSET,
 614         },
 615         [BTTV_BOARD_CONFERENCETV] = {
 616                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 617                 .video_inputs   = 4,
 618                 /* .audio_inputs= 2,  tuner, line in */
 619                 .svhs           = 2,
 620                 .gpiomask       = 0x1800,
 621                 .muxsel         = MUXSEL(2, 3, 1, 1),
 622                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 623                 .gpiomute       = 0x1800,
 624                 .pll            = PLL_28,
 625                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 626                 .tuner_addr     = ADDR_UNSET,
 627         },
 628         [BTTV_BOARD_PHOEBE_TVMAS] = {
 629                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 630                 .video_inputs   = 3,
 631                 /* .audio_inputs= 1, */
 632                 .svhs           = 2,
 633                 .gpiomask       = 0xc00,
 634                 .muxsel         = MUXSEL(2, 3, 1, 1),
 635                 .gpiomux        = { 0, 1, 0x800, 0x400 },
 636                 .gpiomute       = 0xc00,
 637                 .pll            = PLL_28,
 638                 .tuner_type     = UNSET,
 639                 .tuner_addr     = ADDR_UNSET,
 640         },
 641         [BTTV_BOARD_MODTEC_205] = {
 642                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 643                 .video_inputs   = 3,
 644                 /* .audio_inputs= 1, */
 645                 .svhs           = NO_SVHS,
 646                 .has_dig_in     = 1,
 647                 .gpiomask       = 7,
 648                 .muxsel         = MUXSEL(2, 3, 0), /* input 2 is digital */
 649                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
 650                 .gpiomux        = { 0, 0, 0, 0 },
 651                 .no_msp34xx     = 1,
 652                 .pll            = PLL_28,
 653                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 654                 .tuner_addr     = ADDR_UNSET,
 655         },
 656
 657         /* ---- card 0x18 ---------------------------------- */
 658         [BTTV_BOARD_MAGICTVIEW061] = {
 659                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 660                 .video_inputs   = 3,
 661                 /* .audio_inputs= 1, */
 662                 .svhs           = 2,
 663                 .gpiomask       = 0xe00,
 664                 .muxsel         = MUXSEL(2, 3, 1, 1),
 665                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 666                 .gpiomute       = 0xc00,
 667                 .pll            = PLL_28,
 668                 .tuner_type     = UNSET,
 669                 .tuner_addr     = ADDR_UNSET,
 670                 .has_remote     = 1,
 671                 .has_radio      = 1,  /* not every card has radio */
 672         },
 673         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 674                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 675                 .video_inputs   = 3,
 676                 /* .audio_inputs= 1, */
 677                 .svhs           = 2,
 678                 .gpiomask       = 0x1f0fff,
 679                 .muxsel         = MUXSEL(2, 3, 1, 1),
 680                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 681                 .gpiomute       = 0x40000,
 682                 .tuner_type     = TUNER_PHILIPS_PAL,
 683                 .tuner_addr     = ADDR_UNSET,
 684                 .audio_mode_gpio= terratv_audio,
 685         },
 686         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 687                 .name           = "Hauppauge WinCam newer (bt878)",
 688                 .video_inputs   = 4,
 689                 /* .audio_inputs= 1, */
 690                 .svhs           = 3,
 691                 .gpiomask       = 7,
 692                 .muxsel         = MUXSEL(2, 0, 1, 1),
 693                 .gpiomux        = { 0, 1, 2, 3 },
 694                 .gpiomute       = 4,
 695                 .tuner_type     = UNSET,
 696                 .tuner_addr     = ADDR_UNSET,
 697         },
 698         [BTTV_BOARD_MAXI] = {
 699                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 700                 .video_inputs   = 4,
 701                 /* .audio_inputs= 2, */
 702                 .svhs           = 2,
 703                 .gpiomask       = 0x1800,
 704                 .muxsel         = MUXSEL(2, 3, 1, 1),
 705                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 706                 .gpiomute       = 0x1800,
 707                 .pll            = PLL_28,
 708                 .tuner_type     = TUNER_PHILIPS_SECAM,
 709                 .tuner_addr     = ADDR_UNSET,
 710         },
 711
 712         /* ---- card 0x1c ---------------------------------- */
 713         [BTTV_BOARD_TERRATV] = {
 714                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 715                 .video_inputs   = 3,
 716                 /* .audio_inputs= 1, */
 717                 .svhs           = 2,
 718                 .gpiomask       = 0x1f0fff,
 719                 .muxsel         = MUXSEL(2, 3, 1, 1),
 720                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 721                 .gpiomute       = 0x40000,
 722                 .tuner_type     = TUNER_PHILIPS_PAL,
 723                 .tuner_addr     = ADDR_UNSET,
 724                 .audio_mode_gpio= terratv_audio,
 725                 /* GPIO wiring:
 726                 External 20 pin connector (for Active Radio Upgrade board)
 727                 gpio00: i2c-sda
 728                 gpio01: i2c-scl
 729                 gpio02: om5610-data
 730                 gpio03: om5610-clk
 731                 gpio04: om5610-wre
 732                 gpio05: om5610-stereo
 733                 gpio06: rds6588-davn
 734                 gpio07: Pin 7 n.c.
 735                 gpio08: nIOW
 736                 gpio09+10: nIOR, nSEL ?? (bt878)
 737                         gpio09: nIOR (bt848)
 738                         gpio10: nSEL (bt848)
 739                 Sound Routing:
 740                 gpio16: u2-A0 (1st 4052bt)
 741                 gpio17: u2-A1
 742                 gpio18: u2-nEN
 743                 gpio19: u4-A0 (2nd 4052)
 744                 gpio20: u4-A1
 745                         u4-nEN - GND
 746                 Btspy:
 747                         00000 : Cdrom (internal audio input)
 748                         10000 : ext. Video audio input
 749                         20000 : TV Mono
 750                         a0000 : TV Mono/2
 751                 1a0000 : TV Stereo
 752                         30000 : Radio
 753                         40000 : Mute
 754         */
 755
 756         },
 757         [BTTV_BOARD_PXC200] = {
 758                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 759                 .name           = "Imagenation PXC200",
 760                 .video_inputs   = 5,
 761                 /* .audio_inputs= 1, */
 762                 .svhs           = 1, /* was: 4 */
 763                 .gpiomask       = 0,
 764                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 765                 .gpiomux        = { 0 },
 766                 .tuner_type     = TUNER_ABSENT,
 767                 .tuner_addr     = ADDR_UNSET,
 768                 .muxsel_hook    = PXC200_muxsel,
 769
 770         },
 771         [BTTV_BOARD_FLYVIDEO_98] = {
 772                 .name           = "Lifeview FlyVideo 98 LR50",
 773                 .video_inputs   = 4,
 774                 /* .audio_inputs= 1, */
 775                 .svhs           = 2,
 776                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 777                 .muxsel         = MUXSEL(2, 3, 1, 1),
 778                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 779                 .gpiomute       = 0x1800,
 780                 .pll            = PLL_28,
 781                 .tuner_type     = UNSET,
 782                 .tuner_addr     = ADDR_UNSET,
 783         },
 784         [BTTV_BOARD_IPROTV] = {
 785                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 786                 .video_inputs   = 4,
 787                 /* .audio_inputs= 1, */
 788                 .svhs           = 3,
 789                 .gpiomask       = 1,
 790                 .muxsel         = MUXSEL(2, 3, 1, 1),
 791                 .gpiomux        = { 1, 0, 0, 0 },
 792                 .pll            = PLL_28,
 793                 .tuner_type     = TUNER_PHILIPS_PAL,
 794                 .tuner_addr     = ADDR_UNSET,
 795         },
 796
 797         /* ---- card 0x20 ---------------------------------- */
 798         [BTTV_BOARD_INTEL_C_S_PCI] = {
 799                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 800                 .video_inputs   = 4,
 801                 /* .audio_inputs= 0, */
 802                 .svhs           = 2,
 803                 .gpiomask       = 0,
 804                 .muxsel         = MUXSEL(2, 3, 1, 1),
 805                 .gpiomux        = { 0 },
 806                 .tuner_type     = TUNER_ABSENT,
 807                 .tuner_addr     = ADDR_UNSET,
 808         },
 809         [BTTV_BOARD_TERRATVALUE] = {
 810                 .name           = "Terratec TerraTValue Version Bt878",
 811                 .video_inputs   = 3,
 812                 /* .audio_inputs= 1, */
 813                 .svhs           = 2,
 814                 .gpiomask       = 0xffff00,
 815                 .muxsel         = MUXSEL(2, 3, 1, 1),
 816                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 817                 .gpiomute       = 0x900,
 818                 .pll            = PLL_28,
 819                 .tuner_type     = TUNER_PHILIPS_PAL,
 820                 .tuner_addr     = ADDR_UNSET,
 821         },
 822         [BTTV_BOARD_WINFAST2000] = {
 823                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 824                 .video_inputs   = 4,
 825                 /* .audio_inputs= 1, */
 826                 .svhs           = 2,
 827                 /* TV, CVid, SVid, CVid over SVid connector */
 828                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 829                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 830                 .gpiomask       = 0xb33000,
 831                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 832                 .gpiomute       = 0x800000,
 833                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 834                         gpio23 -- hef4052:nEnable (0x800000)
 835                         gpio12 -- hef4052:A1
 836                         gpio13 -- hef4052:A0
 837                 0x0000: external audio
 838                 0x1000: FM
 839                 0x2000: TV
 840                 0x3000: n.c.
 841                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 842                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 843                 */
 844                 .pll            = PLL_28,
 845                 .has_radio      = 1,
 846                 .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 847                 .tuner_addr     = ADDR_UNSET,
 848                 .audio_mode_gpio= winfast2000_audio,
 849                 .has_remote     = 1,
 850         },
 851         [BTTV_BOARD_CHRONOS_VS2] = {
 852                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 853                 .video_inputs   = 4,
 854                 /* .audio_inputs= 3, */
 855                 .svhs           = 2,
 856                 .gpiomask       = 0x1800,
 857                 .muxsel         = MUXSEL(2, 3, 1, 1),
 858                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 859                 .gpiomute       = 0x1800,
 860                 .pll            = PLL_28,
 861                 .tuner_type     = UNSET,
 862                 .tuner_addr     = ADDR_UNSET,
 863         },
 864
 865         /* ---- card 0x24 ---------------------------------- */
 866         [BTTV_BOARD_TYPHOON_TVIEW] = {
 867                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 868                 .video_inputs   = 4,
 869                 /* .audio_inputs= 3, */
 870                 .svhs           = 2,
 871                 .gpiomask       = 0x1800,
 872                 .muxsel         = MUXSEL(2, 3, 1, 1),
 873                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 874                 .gpiomute       = 0x1800,
 875                 .pll            = PLL_28,
 876                 .tuner_type     = UNSET,
 877                 .tuner_addr     = ADDR_UNSET,
 878                 .has_radio      = 1,
 879         },
 880         [BTTV_BOARD_PXELVWPLTVPRO] = {
 881                 .name           = "Prolink PixelView PlayTV pro",
 882                 .video_inputs   = 3,
 883                 /* .audio_inputs= 1, */
 884                 .svhs           = 2,
 885                 .gpiomask       = 0xff,
 886                 .muxsel         = MUXSEL(2, 3, 1, 1),
 887                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 888                 .gpiomute       = 0x29,
 889                 .no_msp34xx     = 1,
 890                 .pll            = PLL_28,
 891                 .tuner_type     = UNSET,
 892                 .tuner_addr     = ADDR_UNSET,
 893         },
 894         [BTTV_BOARD_MAGICTVIEW063] = {
 895                 .name           = "Askey CPH06X TView99",
 896                 .video_inputs   = 4,
 897                 /* .audio_inputs= 1, */
 898                 .svhs           = 2,
 899                 .gpiomask       = 0x551e00,
 900                 .muxsel         = MUXSEL(2, 3, 1, 0),
 901                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 902                 .gpiomute       = 0x551c00,
 903                 .pll            = PLL_28,
 904                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 905                 .tuner_addr     = ADDR_UNSET,
 906                 .has_remote     = 1,
 907         },
 908         [BTTV_BOARD_PINNACLE] = {
 909                 .name           = "Pinnacle PCTV Studio/Rave",
 910                 .video_inputs   = 3,
 911                 /* .audio_inputs= 1, */
 912                 .svhs           = 2,
 913                 .gpiomask       = 0x03000F,
 914                 .muxsel         = MUXSEL(2, 3, 1, 1),
 915                 .gpiomux        = { 2, 0xd0001, 0, 0 },
 916                 .gpiomute       = 1,
 917                 .pll            = PLL_28,
 918                 .tuner_type     = UNSET,
 919                 .tuner_addr     = ADDR_UNSET,
 920         },
 921
 922         /* ---- card 0x28 ---------------------------------- */
 923         [BTTV_BOARD_STB2] = {
 924                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 925                 .video_inputs   = 3,
 926                 /* .audio_inputs= 1, */
 927                 .svhs           = 2,
 928                 .gpiomask       = 7,
 929                 .muxsel         = MUXSEL(2, 3, 1, 1),
 930                 .gpiomux        = { 4, 0, 2, 3 },
 931                 .gpiomute       = 1,
 932                 .no_msp34xx     = 1,
 933                 .tuner_type     = TUNER_PHILIPS_NTSC,
 934                 .tuner_addr     = ADDR_UNSET,
 935                 .pll            = PLL_28,
 936                 .has_radio      = 1,
 937         },
 938         [BTTV_BOARD_AVPHONE98] = {
 939                 .name           = "AVerMedia TVPhone 98",
 940                 .video_inputs   = 3,
 941                 /* .audio_inputs= 4, */
 942                 .svhs           = 2,
 943                 .gpiomask       = 15,
 944                 .muxsel         = MUXSEL(2, 3, 1, 1),
 945                 .gpiomux        = { 13, 4, 11, 7 },
 946                 .pll            = PLL_28,
 947                 .tuner_type     = UNSET,
 948                 .tuner_addr     = ADDR_UNSET,
 949                 .has_radio      = 1,
 950                 .audio_mode_gpio= avermedia_tvphone_audio,
 951         },
 952         [BTTV_BOARD_PV951] = {
 953                 .name           = "ProVideo PV951", /* pic16c54 */
 954                 .video_inputs   = 3,
 955                 /* .audio_inputs= 1, */
 956                 .svhs           = 2,
 957                 .gpiomask       = 0,
 958                 .muxsel         = MUXSEL(2, 3, 1, 1),
 959                 .gpiomux        = { 0, 0, 0, 0},
 960                 .no_msp34xx     = 1,
 961                 .pll            = PLL_28,
 962                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 963                 .tuner_addr     = ADDR_UNSET,
 964         },
 965         [BTTV_BOARD_ONAIR_TV] = {
 966                 .name           = "Little OnAir TV",
 967                 .video_inputs   = 3,
 968                 /* .audio_inputs= 1, */
 969                 .svhs           = 2,
 970                 .gpiomask       = 0xe00b,
 971                 .muxsel         = MUXSEL(2, 3, 1, 1),
 972                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
 973                 .gpiomute       = 0xff3ffc,
 974                 .no_msp34xx     = 1,
 975                 .tuner_type     = UNSET,
 976                 .tuner_addr     = ADDR_UNSET,
 977         },
 978
 979         /* ---- card 0x2c ---------------------------------- */
 980         [BTTV_BOARD_SIGMA_TVII_FM] = {
 981                 .name           = "Sigma TVII-FM",
 982                 .video_inputs   = 2,
 983                 /* .audio_inputs= 1, */
 984                 .svhs           = NO_SVHS,
 985                 .gpiomask       = 3,
 986                 .muxsel         = MUXSEL(2, 3, 1, 1),
 987                 .gpiomux        = { 1, 1, 0, 2 },
 988                 .gpiomute       = 3,
 989                 .no_msp34xx     = 1,
 990                 .pll            = PLL_NONE,
 991                 .tuner_type     = UNSET,
 992                 .tuner_addr     = ADDR_UNSET,
 993         },
 994         [BTTV_BOARD_MATRIX_VISION2] = {
 995                 .name           = "MATRIX-Vision MV-Delta 2",
 996                 .video_inputs   = 5,
 997                 /* .audio_inputs= 1, */
 998                 .svhs           = 3,
 999                 .gpiomask       = 0,
1000                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1001                 .gpiomux        = { 0 },
1002                 .no_msp34xx     = 1,
1003                 .pll            = PLL_28,
1004                 .tuner_type     = TUNER_ABSENT,
1005                 .tuner_addr     = ADDR_UNSET,
1006         },
1007         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1008                 .name           = "Zoltrix Genie TV/FM",
1009                 .video_inputs   = 3,
1010                 /* .audio_inputs= 1, */
1011                 .svhs           = 2,
1012                 .gpiomask       = 0xbcf03f,
1013                 .muxsel         = MUXSEL(2, 3, 1, 1),
1014                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1015                 .gpiomute       = 0xbcb03f,
1016                 .no_msp34xx     = 1,
1017                 .pll            = PLL_28,
1018                 .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1019                 .tuner_addr     = ADDR_UNSET,
1020         },
1021         [BTTV_BOARD_TERRATVRADIO] = {
1022                 .name           = "Terratec TV/Radio+",
1023                 .video_inputs   = 3,
1024                 /* .audio_inputs= 1, */
1025                 .svhs           = 2,
1026                 .gpiomask       = 0x70000,
1027                 .muxsel         = MUXSEL(2, 3, 1, 1),
1028                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1029                 .gpiomute       = 0x40000,
1030                 .no_msp34xx     = 1,
1031                 .pll            = PLL_35,
1032                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1033                 .tuner_addr     = ADDR_UNSET,
1034                 .has_radio      = 1,
1035         },
1036
1037         /* ---- card 0x30 ---------------------------------- */
1038         [BTTV_BOARD_DYNALINK] = {
1039                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1040                 .video_inputs   = 3,
1041                 /* .audio_inputs= 1, */
1042                 .svhs           = 2,
1043                 .gpiomask       = 15,
1044                 .muxsel         = MUXSEL(2, 3, 1, 1),
1045                 .gpiomux        = {2,0,0,0 },
1046                 .gpiomute       = 1,
1047                 .pll            = PLL_28,
1048                 .tuner_type     = UNSET,
1049                 .tuner_addr     = ADDR_UNSET,
1050         },
1051         [BTTV_BOARD_GVBCTV3PCI] = {
1052                 .name           = "IODATA GV-BCTV3/PCI",
1053                 .video_inputs   = 3,
1054                 /* .audio_inputs= 1, */
1055                 .svhs           = 2,
1056                 .gpiomask       = 0x010f00,
1057                 .muxsel         = MUXSEL(2, 3, 0, 0),
1058                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1059                 .no_msp34xx     = 1,
1060                 .pll            = PLL_28,
1061                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1062                 .tuner_addr     = ADDR_UNSET,
1063                 .audio_mode_gpio= gvbctv3pci_audio,
1064         },
1065         [BTTV_BOARD_PXELVWPLTVPAK] = {
1066                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1067                 .video_inputs   = 5,
1068                 /* .audio_inputs= 1, */
1069                 .svhs           = 3,
1070                 .has_dig_in     = 1,
1071                 .gpiomask       = 0xAA0000,
1072                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1073                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1074                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1075                 .gpiomute       = 0xa8000,
1076                 .no_msp34xx     = 1,
1077                 .pll            = PLL_28,
1078                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1079                 .tuner_addr     = ADDR_UNSET,
1080                 .has_remote     = 1,
1081                 /* GPIO wiring: (different from Rev.4C !)
1082                         GPIO17: U4.A0 (first hef4052bt)
1083                         GPIO19: U4.A1
1084                         GPIO20: U5.A1 (second hef4052bt)
1085                         GPIO21: U4.nEN
1086                         GPIO22: BT832 Reset Line
1087                         GPIO23: A5,A0, U5,nEN
1088                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1089                 */
1090         },
1091         [BTTV_BOARD_EAGLE] = {
1092                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1093                 .video_inputs   = 4,
1094                 /* .audio_inputs= 1, */
1095                 .svhs           = 2,
1096                 .gpiomask       = 7,
1097                 .muxsel         = MUXSEL(2, 0, 1, 1),
1098                 .gpiomux        = { 0, 1, 2, 3 },
1099                 .gpiomute       = 4,
1100                 .pll            = PLL_28,
1101                 .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1102                 .tuner_addr     = ADDR_UNSET,
1103         },
1104
1105         /* ---- card 0x34 ---------------------------------- */
1106         [BTTV_BOARD_PINNACLEPRO] = {
1107                 /* David Härdeman <david@2gen.com> */
1108                 .name           = "Pinnacle PCTV Studio Pro",
1109                 .video_inputs   = 4,
1110                 /* .audio_inputs= 1, */
1111                 .svhs           = 3,
1112                 .gpiomask       = 0x03000F,
1113                 .muxsel         = MUXSEL(2, 3, 1, 1),
1114                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1115                 .gpiomute       = 10,
1116                                 /* sound path (5 sources):
1117                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1118                                         0= ext. Audio IN
1119                                         1= from MUX2
1120                                         2= Mono TV sound from Tuner
1121                                         3= not connected
1122                                 MUX2 (mask 0x30000):
1123                                         0,2,3= from MSP34xx
1124                                         1= FM stereo Radio from Tuner */
1125                 .pll            = PLL_28,
1126                 .tuner_type     = UNSET,
1127                 .tuner_addr     = ADDR_UNSET,
1128         },
1129         [BTTV_BOARD_TVIEW_RDS_FM] = {
1130                 /* Claas Langbehn <claas@bigfoot.com>,
1131                 Sven Grothklags <sven@upb.de> */
1132                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1133                 .video_inputs   = 4,
1134                 /* .audio_inputs= 3, */
1135                 .svhs           = 2,
1136                 .gpiomask       = 0x1c,
1137                 .muxsel         = MUXSEL(2, 3, 1, 1),
1138                 .gpiomux        = { 0, 0, 0x10, 8 },
1139                 .gpiomute       = 4,
1140                 .pll            = PLL_28,
1141                 .tuner_type     = TUNER_PHILIPS_PAL,
1142                 .tuner_addr     = ADDR_UNSET,
1143                 .has_radio      = 1,
1144         },
1145         [BTTV_BOARD_LIFETEC_9415] = {
1146                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1147                 in de.comp.os.unix.linux.hardware:
1148                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1149                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1150                         options tuner type=5 */
1151                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1152                 .video_inputs   = 4,
1153                 /* .audio_inputs= 1, */
1154                 .svhs           = 2,
1155                 .gpiomask       = 0x18e0,
1156                 .muxsel         = MUXSEL(2, 3, 1, 1),
1157                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1158                 .gpiomute       = 0x18e0,
1159                         /* For cards with tda9820/tda9821:
1160                                 0x0000: Tuner normal stereo
1161                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1162                                 0x0880: Tuner A2 stereo */
1163                 .pll            = PLL_28,
1164                 .tuner_type     = UNSET,
1165                 .tuner_addr     = ADDR_UNSET,
1166         },
1167         [BTTV_BOARD_BESTBUY_EASYTV] = {
1168                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1169                 old Easy TV BT848 version (model CPH031) */
1170                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1171                 .video_inputs   = 4,
1172                 /* .audio_inputs= 1, */
1173                 .svhs           = 2,
1174                 .gpiomask       = 0xF,
1175                 .muxsel         = MUXSEL(2, 3, 1, 0),
1176                 .gpiomux        = { 2, 0, 0, 0 },
1177                 .gpiomute       = 10,
1178                 .pll            = PLL_28,
1179                 .tuner_type     = TUNER_TEMIC_PAL,
1180                 .tuner_addr     = ADDR_UNSET,
1181         },
1182
1183         /* ---- card 0x38 ---------------------------------- */
1184         [BTTV_BOARD_FLYVIDEO_98FM] = {
1185                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1186                 .name           = "Lifeview FlyVideo 98FM LR50",
1187                 .video_inputs   = 4,
1188                 /* .audio_inputs= 3, */
1189                 .svhs           = 2,
1190                 .gpiomask       = 0x1800,
1191                 .muxsel         = MUXSEL(2, 3, 1, 1),
1192                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1193                 .gpiomute       = 0x1800,
1194                 .pll            = PLL_28,
1195                 .tuner_type     = TUNER_PHILIPS_PAL,
1196                 .tuner_addr     = ADDR_UNSET,
1197         },
1198                 /* This is the ultimate cheapo capture card
1199                 * just a BT848A on a small PCB!
1200                 * Steve Hosgood <steve@equiinet.com> */
1201         [BTTV_BOARD_GRANDTEC] = {
1202                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1203                 .video_inputs   = 2,
1204                 /* .audio_inputs= 0, */
1205                 .svhs           = 1,
1206                 .gpiomask       = 0,
1207                 .muxsel         = MUXSEL(3, 1),
1208                 .gpiomux        = { 0 },
1209                 .no_msp34xx     = 1,
1210                 .pll            = PLL_35,
1211                 .tuner_type     = TUNER_ABSENT,
1212                 .tuner_addr     = ADDR_UNSET,
1213         },
1214         [BTTV_BOARD_ASKEY_CPH060] = {
1215                 /* Daniel Herrington <daniel.herrington@home.com> */
1216                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1217                 .video_inputs   = 3,
1218                 /* .audio_inputs= 1, */
1219                 .svhs           = 2,
1220                 .gpiomask       = 0xe00,
1221                 .muxsel         = MUXSEL(2, 3, 1, 1),
1222                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1223                 .gpiomute       = 0x800,
1224                 .pll            = PLL_28,
1225                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1226                 .tuner_addr     = ADDR_UNSET,
1227         },
1228         [BTTV_BOARD_ASKEY_CPH03X] = {
1229                 /* Matti Mottus <mottus@physic.ut.ee> */
1230                 .name           = "Askey CPH03x TV Capturer",
1231                 .video_inputs   = 4,
1232                 /* .audio_inputs= 1, */
1233                 .svhs           = 2,
1234                 .gpiomask       = 0x03000F,
1235                 .muxsel         = MUXSEL(2, 3, 1, 0),
1236                 .gpiomux        = { 2, 0, 0, 0 },
1237                 .gpiomute       = 1,
1238                 .pll            = PLL_28,
1239                 .tuner_type     = TUNER_TEMIC_PAL,
1240                 .tuner_addr     = ADDR_UNSET,
1241                 .has_remote     = 1,
1242         },
1243
1244         /* ---- card 0x3c ---------------------------------- */
1245         [BTTV_BOARD_MM100PCTV] = {
1246                 /* Philip Blundell <philb@gnu.org> */
1247                 .name           = "Modular Technology MM100PCTV",
1248                 .video_inputs   = 2,
1249                 /* .audio_inputs= 2, */
1250                 .svhs           = NO_SVHS,
1251                 .gpiomask       = 11,
1252                 .muxsel         = MUXSEL(2, 3, 1, 1),
1253                 .gpiomux        = { 2, 0, 0, 1 },
1254                 .gpiomute       = 8,
1255                 .pll            = PLL_35,
1256                 .tuner_type     = TUNER_TEMIC_PAL,
1257                 .tuner_addr     = ADDR_UNSET,
1258         },
1259         [BTTV_BOARD_GMV1] = {
1260                 /* Adrian Cox <adrian@humboldt.co.uk */
1261                 .name           = "AG Electronics GMV1",
1262                 .video_inputs   = 2,
1263                 /* .audio_inputs= 0, */
1264                 .svhs           = 1,
1265                 .gpiomask       = 0xF,
1266                 .muxsel         = MUXSEL(2, 2),
1267                 .gpiomux        = { },
1268                 .no_msp34xx     = 1,
1269                 .pll            = PLL_28,
1270                 .tuner_type     = TUNER_ABSENT,
1271                 .tuner_addr     = ADDR_UNSET,
1272         },
1273         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1274                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1275                 new Easy TV BT878 version (model CPH061)
1276                 special thanks to Informatica Mieres for providing the card */
1277                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1278                 .video_inputs   = 3,
1279                 /* .audio_inputs= 2, */
1280                 .svhs           = 2,
1281                 .gpiomask       = 0xFF,
1282                 .muxsel         = MUXSEL(2, 3, 1, 0),
1283                 .gpiomux        = { 1, 0, 4, 4 },
1284                 .gpiomute       = 9,
1285                 .pll            = PLL_28,
1286                 .tuner_type     = TUNER_PHILIPS_PAL,
1287                 .tuner_addr     = ADDR_UNSET,
1288         },
1289         [BTTV_BOARD_ATI_TVWONDER] = {
1290                 /* Lukas Gebauer <geby@volny.cz> */
1291                 .name           = "ATI TV-Wonder",
1292                 .video_inputs   = 3,
1293                 /* .audio_inputs= 1, */
1294                 .svhs           = 2,
1295                 .gpiomask       = 0xf03f,
1296                 .muxsel         = MUXSEL(2, 3, 1, 0),
1297                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1298                 .gpiomute       = 0xbffe,
1299                 .pll            = PLL_28,
1300                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1301                 .tuner_addr     = ADDR_UNSET,
1302         },
1303
1304         /* ---- card 0x40 ---------------------------------- */
1305         [BTTV_BOARD_ATI_TVWONDERVE] = {
1306                 /* Lukas Gebauer <geby@volny.cz> */
1307                 .name           = "ATI TV-Wonder VE",
1308                 .video_inputs   = 2,
1309                 /* .audio_inputs= 1, */
1310                 .svhs           = NO_SVHS,
1311                 .gpiomask       = 1,
1312                 .muxsel         = MUXSEL(2, 3, 0, 1),
1313                 .gpiomux        = { 0, 0, 1, 0 },
1314                 .no_msp34xx     = 1,
1315                 .pll            = PLL_28,
1316                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1317                 .tuner_addr     = ADDR_UNSET,
1318         },
1319         [BTTV_BOARD_FLYVIDEO2000] = {
1320                 /* DeeJay <deejay@westel900.net (2000S) */
1321                 .name           = "Lifeview FlyVideo 2000S LR90",
1322                 .video_inputs   = 3,
1323                 /* .audio_inputs= 3, */
1324                 .svhs           = 2,
1325                 .gpiomask       = 0x18e0,
1326                 .muxsel         = MUXSEL(2, 3, 0, 1),
1327                                 /* Radio changed from 1e80 to 0x800 to make
1328                                 FlyVideo2000S in .hu happy (gm)*/
1329                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1330                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1331                 .gpiomute       = 0x1800,
1332                 .audio_mode_gpio= fv2000s_audio,
1333                 .no_msp34xx     = 1,
1334                 .pll            = PLL_28,
1335                 .tuner_type     = TUNER_PHILIPS_PAL,
1336                 .tuner_addr     = ADDR_UNSET,
1337         },
1338         [BTTV_BOARD_TERRATVALUER] = {
1339                 .name           = "Terratec TValueRadio",
1340                 .video_inputs   = 3,
1341                 /* .audio_inputs= 1, */
1342                 .svhs           = 2,
1343                 .gpiomask       = 0xffff00,
1344                 .muxsel         = MUXSEL(2, 3, 1, 1),
1345                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1346                 .gpiomute       = 0x900,
1347                 .pll            = PLL_28,
1348                 .tuner_type     = TUNER_PHILIPS_PAL,
1349                 .tuner_addr     = ADDR_UNSET,
1350                 .has_radio      = 1,
1351         },
1352         [BTTV_BOARD_GVBCTV4PCI] = {
1353                 /* TANAKA Kei <peg00625@nifty.com> */
1354                 .name           = "IODATA GV-BCTV4/PCI",
1355                 .video_inputs   = 3,
1356                 /* .audio_inputs= 1, */
1357                 .svhs           = 2,
1358                 .gpiomask       = 0x010f00,
1359                 .muxsel         = MUXSEL(2, 3, 0, 0),
1360                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1361                 .no_msp34xx     = 1,
1362                 .pll            = PLL_28,
1363                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1364                 .tuner_addr     = ADDR_UNSET,
1365                 .audio_mode_gpio= gvbctv3pci_audio,
1366         },
1367
1368         /* ---- card 0x44 ---------------------------------- */
1369         [BTTV_BOARD_VOODOOTV_FM] = {
1370                 .name           = "3Dfx VoodooTV FM (Euro)",
1371                 /* try "insmod msp3400 simple=0" if you have
1372                 * sound problems with this card. */
1373                 .video_inputs   = 4,
1374                 /* .audio_inputs= 1, */
1375                 .svhs           = NO_SVHS,
1376                 .gpiomask       = 0x4f8a00,
1377                 /* 0x100000: 1=MSP enabled (0=disable again)
1378                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1379                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1380                 .gpiomute       = 0x947fff,
1381                 /* tvtuner, radio,   external,internal, mute,  stereo
1382                 * tuner, Composite, SVid, Composite-on-Svid-adapter */
1383                 .muxsel         = MUXSEL(2, 3, 0, 1),
1384                 .tuner_type     = TUNER_MT2032,
1385                 .tuner_addr     = ADDR_UNSET,
1386                 .pll            = PLL_28,
1387                 .has_radio      = 1,
1388         },
1389         [BTTV_BOARD_VOODOOTV_200] = {
1390                 .name           = "VoodooTV 200 (USA)",
1391                 /* try "insmod msp3400 simple=0" if you have
1392                 * sound problems with this card. */
1393                 .video_inputs   = 4,
1394                 /* .audio_inputs= 1, */
1395                 .svhs           = NO_SVHS,
1396                 .gpiomask       = 0x4f8a00,
1397                 /* 0x100000: 1=MSP enabled (0=disable again)
1398                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1399                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1400                 .gpiomute       = 0x947fff,
1401                 /* tvtuner, radio,   external,internal, mute,  stereo
1402                 * tuner, Composite, SVid, Composite-on-Svid-adapter */
1403                 .muxsel         = MUXSEL(2, 3, 0, 1),
1404                 .tuner_type     = TUNER_MT2032,
1405                 .tuner_addr     = ADDR_UNSET,
1406                 .pll            = PLL_28,
1407                 .has_radio      = 1,
1408         },
1409         [BTTV_BOARD_AIMMS] = {
1410                 /* Philip Blundell <pb@nexus.co.uk> */
1411                 .name           = "Active Imaging AIMMS",
1412                 .video_inputs   = 1,
1413                 /* .audio_inputs= 0, */
1414                 .tuner_type     = TUNER_ABSENT,
1415                 .tuner_addr     = ADDR_UNSET,
1416                 .pll            = PLL_28,
1417                 .muxsel         = MUXSEL(2),
1418                 .gpiomask       = 0
1419         },
1420         [BTTV_BOARD_PV_BT878P_PLUS] = {
1421                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1422                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1423                 .video_inputs   = 3,
1424                 /* .audio_inputs= 4, */
1425                 .svhs           = 2,
1426                 .gpiomask       = 15,
1427                 .muxsel         = MUXSEL(2, 3, 1, 1),
1428                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1429                 .gpiomute       = 13,
1430                 .pll            = PLL_28,
1431                 .tuner_type     = TUNER_LG_PAL_I_FM,
1432                 .tuner_addr     = ADDR_UNSET,
1433                 .has_remote     = 1,
1434                 /* GPIO wiring:
1435                         GPIO0: U4.A0 (hef4052bt)
1436                         GPIO1: U4.A1
1437                         GPIO2: U4.A1 (second hef4052bt)
1438                         GPIO3: U4.nEN, U5.A0, A5.nEN
1439                         GPIO8-15: vrd866b ?
1440                 */
1441         },
1442         [BTTV_BOARD_FLYVIDEO98EZ] = {
1443                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1444                 .video_inputs   = 4,
1445                 /* .audio_inputs= 0, */
1446                 .svhs           = 2,
1447                 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1448                 .muxsel         = MUXSEL(2, 3, 1, 1),
1449                 .pll            = PLL_28,
1450                 .no_msp34xx     = 1,
1451                 .tuner_type     = TUNER_ABSENT,
1452                 .tuner_addr     = ADDR_UNSET,
1453         },
1454
1455         /* ---- card 0x48 ---------------------------------- */
1456         [BTTV_BOARD_PV_BT878P_9B] = {
1457                 /* Dariusz Kowalewski <darekk@automex.pl> */
1458                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1459                 .video_inputs   = 4,
1460                 /* .audio_inputs= 1, */
1461                 .svhs           = 2,
1462                 .gpiomask       = 0x3f,
1463                 .muxsel         = MUXSEL(2, 3, 1, 1),
1464                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1465                 .gpiomute       = 0x09,
1466                 .no_msp34xx     = 1,
1467                 .pll            = PLL_28,
1468                 .tuner_type     = TUNER_PHILIPS_PAL,
1469                 .tuner_addr     = ADDR_UNSET,
1470                 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1471                 .has_radio      = 1,  /* Note: not all cards have radio */
1472                 .has_remote     = 1,
1473                 /* GPIO wiring:
1474                         GPIO0: A0 hef4052
1475                         GPIO1: A1 hef4052
1476                         GPIO3: nEN hef4052
1477                         GPIO8-15: vrd866b
1478                         GPIO20,22,23: R30,R29,R28
1479                 */
1480         },
1481         [BTTV_BOARD_SENSORAY311_611] = {
1482                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1483                 /* you must jumper JP5 for the 311 card (PC/104+) to work */
1484                 .name           = "Sensoray 311/611",
1485                 .video_inputs   = 5,
1486                 /* .audio_inputs= 0, */
1487                 .svhs           = 4,
1488                 .gpiomask       = 0,
1489                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1490                 .gpiomux        = { 0 },
1491                 .tuner_type     = TUNER_ABSENT,
1492                 .tuner_addr     = ADDR_UNSET,
1493         },
1494         [BTTV_BOARD_RV605] = {
1495                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1496                 .name           = "RemoteVision MX (RV605)",
1497                 .video_inputs   = 16,
1498                 /* .audio_inputs= 0, */
1499                 .svhs           = NO_SVHS,
1500                 .gpiomask       = 0x00,
1501                 .gpiomask2      = 0x07ff,
1502                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1503                 .no_msp34xx     = 1,
1504                 .tuner_type     = TUNER_ABSENT,
1505                 .tuner_addr     = ADDR_UNSET,
1506                 .muxsel_hook    = rv605_muxsel,
1507         },
1508         [BTTV_BOARD_POWERCLR_MTV878] = {
1509                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1510                 .video_inputs   = 3,
1511                 /* .audio_inputs= 2, */
1512                 .svhs           = 2,
1513                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1514                 .muxsel         = MUXSEL(2, 1, 1),
1515                 .gpiomux        = { 0, 1, 2, 2 },
1516                 .gpiomute       = 4,
1517                 .tuner_type     = TUNER_PHILIPS_PAL,
1518                 .tuner_addr     = ADDR_UNSET,
1519                 .pll            = PLL_28,
1520                 .has_radio      = 1,
1521         },
1522
1523         /* ---- card 0x4c ---------------------------------- */
1524         [BTTV_BOARD_WINDVR] = {
1525                 /* Masaki Suzuki <masaki@btree.org> */
1526                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1527                 .video_inputs   = 3,
1528                 /* .audio_inputs= 1, */
1529                 .svhs           = 2,
1530                 .gpiomask       = 0x140007,
1531                 .muxsel         = MUXSEL(2, 3, 1, 1),
1532                 .gpiomux        = { 0, 1, 2, 3 },
1533                 .gpiomute       = 4,
1534                 .tuner_type     = TUNER_PHILIPS_NTSC,
1535                 .tuner_addr     = ADDR_UNSET,
1536                 .audio_mode_gpio= windvr_audio,
1537         },
1538         [BTTV_BOARD_GRANDTEC_MULTI] = {
1539                 .name           = "GrandTec Multi Capture Card (Bt878)",
1540                 .video_inputs   = 4,
1541                 /* .audio_inputs= 0, */
1542                 .svhs           = NO_SVHS,
1543                 .gpiomask       = 0,
1544                 .muxsel         = MUXSEL(2, 3, 1, 0),
1545                 .gpiomux        = { 0 },
1546                 .no_msp34xx     = 1,
1547                 .pll            = PLL_28,
1548                 .tuner_type     = TUNER_ABSENT,
1549                 .tuner_addr     = ADDR_UNSET,
1550         },
1551         [BTTV_BOARD_KWORLD] = {
1552                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1553                 .video_inputs   = 4,
1554                 /* .audio_inputs= 3, */
1555                 .svhs           = 2,
1556                 .gpiomask       = 7,
1557                 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1558                 .muxsel         = MUXSEL(2, 3, 1, 1),
1559                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1560                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1561                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1562                                                 * This card lacks PCI subsystem ID, sigh.
1563                                                 * gpiomux =1: lower volume, 2+3: mute
1564                                                 * btwincap uses 0x80000/0x80003
1565                                                 */
1566                 .gpiomute       = 4,
1567                 .no_msp34xx     = 1,
1568                 .pll            = PLL_28,
1569                 .tuner_type     = TUNER_PHILIPS_PAL,
1570                 .tuner_addr     = ADDR_UNSET,
1571                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1572                 radio signal strength indicators work fine. */
1573                 .has_radio      = 1,
1574                 /* GPIO Info:
1575                         GPIO0,1:   HEF4052 A0,A1
1576                         GPIO2:     HEF4052 nENABLE
1577                         GPIO3-7:   n.c.
1578                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1579                         GPIO14,15: ??
1580                         GPIO16-21: n.c.
1581                         GPIO22,23: ??
1582                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1583         },
1584         [BTTV_BOARD_DSP_TCVIDEO] = {
1585                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1586                 .name           = "DSP Design TCVIDEO",
1587                 .video_inputs   = 4,
1588                 .svhs           = NO_SVHS,
1589                 .muxsel         = MUXSEL(2, 3, 1, 0),
1590                 .pll            = PLL_28,
1591                 .tuner_type     = UNSET,
1592                 .tuner_addr     = ADDR_UNSET,
1593         },
1594
1595                 /* ---- card 0x50 ---------------------------------- */
1596         [BTTV_BOARD_HAUPPAUGEPVR] = {
1597                 .name           = "Hauppauge WinTV PVR",
1598                 .video_inputs   = 4,
1599                 /* .audio_inputs= 1, */
1600                 .svhs           = 2,
1601                 .muxsel         = MUXSEL(2, 0, 1, 1),
1602                 .pll            = PLL_28,
1603                 .tuner_type     = UNSET,
1604                 .tuner_addr     = ADDR_UNSET,
1605
1606                 .gpiomask       = 7,
1607                 .gpiomux        = {7},
1608         },
1609         [BTTV_BOARD_GVBCTV5PCI] = {
1610                 .name           = "IODATA GV-BCTV5/PCI",
1611                 .video_inputs   = 3,
1612                 /* .audio_inputs= 1, */
1613                 .svhs           = 2,
1614                 .gpiomask       = 0x0f0f80,
1615                 .muxsel         = MUXSEL(2, 3, 1, 0),
1616                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1617                 .gpiomute       = 0x020000,
1618                 .no_msp34xx     = 1,
1619                 .pll            = PLL_28,
1620                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1621                 .tuner_addr     = ADDR_UNSET,
1622                 .audio_mode_gpio= gvbctv5pci_audio,
1623                 .has_radio      = 1,
1624         },
1625         [BTTV_BOARD_OSPREY1x0] = {
1626                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1627                 .video_inputs   = 4,                  /* id-inputs-clock */
1628                 /* .audio_inputs= 0, */
1629                 .svhs           = 3,
1630                 .muxsel         = MUXSEL(3, 2, 0, 1),
1631                 .pll            = PLL_28,
1632                 .tuner_type     = TUNER_ABSENT,
1633                 .tuner_addr     = ADDR_UNSET,
1634                 .no_msp34xx     = 1,
1635                 .no_tda7432     = 1,
1636         },
1637         [BTTV_BOARD_OSPREY1x0_848] = {
1638                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1639                 .video_inputs   = 3,
1640                 /* .audio_inputs= 0, */
1641                 .svhs           = 2,
1642                 .muxsel         = MUXSEL(2, 3, 1),
1643                 .pll            = PLL_28,
1644                 .tuner_type     = TUNER_ABSENT,
1645                 .tuner_addr     = ADDR_UNSET,
1646                 .no_msp34xx     = 1,
1647                 .no_tda7432     = 1,
1648         },
1649
1650                 /* ---- card 0x54 ---------------------------------- */
1651         [BTTV_BOARD_OSPREY101_848] = {
1652                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1653                 .video_inputs   = 2,
1654                 /* .audio_inputs= 0, */
1655                 .svhs           = 1,
1656                 .muxsel         = MUXSEL(3, 1),
1657                 .pll            = PLL_28,
1658                 .tuner_type     = TUNER_ABSENT,
1659                 .tuner_addr     = ADDR_UNSET,
1660                 .no_msp34xx     = 1,
1661                 .no_tda7432     = 1,
1662         },
1663         [BTTV_BOARD_OSPREY1x1] = {
1664                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1665                 .video_inputs   = 1,
1666                 /* .audio_inputs= 0, */
1667                 .svhs           = NO_SVHS,
1668                 .muxsel         = MUXSEL(0),
1669                 .pll            = PLL_28,
1670                 .tuner_type     = TUNER_ABSENT,
1671                 .tuner_addr     = ADDR_UNSET,
1672                 .no_msp34xx     = 1,
1673                 .no_tda7432     = 1,
1674         },
1675         [BTTV_BOARD_OSPREY1x1_SVID] = {
1676                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1677                 .video_inputs   = 2,
1678                 /* .audio_inputs= 0, */
1679                 .svhs           = 1,
1680                 .muxsel         = MUXSEL(0, 1),
1681                 .pll            = PLL_28,
1682                 .tuner_type     = TUNER_ABSENT,
1683                 .tuner_addr     = ADDR_UNSET,
1684                 .no_msp34xx     = 1,
1685                 .no_tda7432     = 1,
1686         },
1687         [BTTV_BOARD_OSPREY2xx] = {
1688                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1689                 .video_inputs   = 1,
1690                 /* .audio_inputs= 1, */
1691                 .svhs           = NO_SVHS,
1692                 .muxsel         = MUXSEL(0),
1693                 .pll            = PLL_28,
1694                 .tuner_type     = TUNER_ABSENT,
1695                 .tuner_addr     = ADDR_UNSET,
1696                 .no_msp34xx     = 1,
1697                 .no_tda7432     = 1,
1698         },
1699
1700                 /* ---- card 0x58 ---------------------------------- */
1701         [BTTV_BOARD_OSPREY2x0_SVID] = {
1702                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1703                 .video_inputs   = 2,
1704                 /* .audio_inputs= 1, */
1705                 .svhs           = 1,
1706                 .muxsel         = MUXSEL(0, 1),
1707                 .pll            = PLL_28,
1708                 .tuner_type     = TUNER_ABSENT,
1709                 .tuner_addr     = ADDR_UNSET,
1710                 .no_msp34xx     = 1,
1711                 .no_tda7432     = 1,
1712         },
1713         [BTTV_BOARD_OSPREY2x0] = {
1714                 .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1715                 .video_inputs   = 2,
1716                 /* .audio_inputs= 1, */
1717                 .svhs           = 1,
1718                 .muxsel         = MUXSEL(2, 3),
1719                 .pll            = PLL_28,
1720                 .tuner_type     = TUNER_ABSENT,
1721                 .tuner_addr     = ADDR_UNSET,
1722                 .no_msp34xx     = 1,
1723                 .no_tda7432     = 1,
1724         },
1725         [BTTV_BOARD_OSPREY500] = {
1726                 .name           = "Osprey 500",   /* 500 */
1727                 .video_inputs   = 2,
1728                 /* .audio_inputs= 1, */
1729                 .svhs           = 1,
1730                 .muxsel         = MUXSEL(2, 3),
1731                 .pll            = PLL_28,
1732                 .tuner_type     = TUNER_ABSENT,
1733                 .tuner_addr     = ADDR_UNSET,
1734                 .no_msp34xx     = 1,
1735                 .no_tda7432     = 1,
1736         },
1737         [BTTV_BOARD_OSPREY540] = {
1738                 .name           = "Osprey 540",   /* 540 */
1739                 .video_inputs   = 4,
1740                 /* .audio_inputs= 1, */
1741                 .pll            = PLL_28,
1742                 .tuner_type     = TUNER_ABSENT,
1743                 .tuner_addr     = ADDR_UNSET,
1744                 .no_msp34xx     = 1,
1745                 .no_tda7432     = 1,
1746         },
1747
1748                 /* ---- card 0x5C ---------------------------------- */
1749         [BTTV_BOARD_OSPREY2000] = {
1750                 .name           = "Osprey 2000",  /* 2000 */
1751                 .video_inputs   = 2,
1752                 /* .audio_inputs= 1, */
1753                 .svhs           = 1,
1754                 .muxsel         = MUXSEL(2, 3),
1755                 .pll            = PLL_28,
1756                 .tuner_type     = TUNER_ABSENT,
1757                 .tuner_addr     = ADDR_UNSET,
1758                 .no_msp34xx     = 1,
1759                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1760         },
1761         [BTTV_BOARD_IDS_EAGLE] = {
1762                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1763                 .name           = "IDS Eagle",
1764                 .video_inputs   = 4,
1765                 /* .audio_inputs= 0, */
1766                 .tuner_type     = TUNER_ABSENT,
1767                 .tuner_addr     = ADDR_UNSET,
1768                 .svhs           = NO_SVHS,
1769                 .gpiomask       = 0,
1770                 .muxsel         = MUXSEL(2, 2, 2, 2),
1771                 .muxsel_hook    = eagle_muxsel,
1772                 .no_msp34xx     = 1,
1773                 .pll            = PLL_28,
1774         },
1775         [BTTV_BOARD_PINNACLESAT] = {
1776                 .name           = "Pinnacle PCTV Sat",
1777                 .video_inputs   = 2,
1778                 /* .audio_inputs= 0, */
1779                 .svhs           = 1,
1780                 .tuner_type     = TUNER_ABSENT,
1781                 .tuner_addr     = ADDR_UNSET,
1782                 .no_msp34xx     = 1,
1783                 .no_tda7432     = 1,
1784                 .muxsel         = MUXSEL(3, 1),
1785                 .pll            = PLL_28,
1786                 .no_gpioirq     = 1,
1787                 .has_dvb        = 1,
1788         },
1789         [BTTV_BOARD_FORMAC_PROTV] = {
1790                 .name           = "Formac ProTV II (bt878)",
1791                 .video_inputs   = 4,
1792                 /* .audio_inputs= 1, */
1793                 .svhs           = 3,
1794                 .gpiomask       = 2,
1795                 /* TV, Comp1, Composite over SVID con, SVID */
1796                 .muxsel         = MUXSEL(2, 3, 1, 1),
1797                 .gpiomux        = { 2, 2, 0, 0 },
1798                 .pll            = PLL_28,
1799                 .has_radio      = 1,
1800                 .tuner_type     = TUNER_PHILIPS_PAL,
1801                 .tuner_addr     = ADDR_UNSET,
1802         /* sound routing:
1803                 GPIO=0x00,0x01,0x03: mute (?)
1804                 0x02: both TV and radio (tuner: FM1216/I)
1805                 The card has onboard audio connectors labeled "cdrom" and "board",
1806                 not soldered here, though unknown wiring.
1807                 Card lacks: external audio in, pci subsystem id.
1808         */
1809         },
1810
1811                 /* ---- card 0x60 ---------------------------------- */
1812         [BTTV_BOARD_MACHTV] = {
1813                 .name           = "MachTV",
1814                 .video_inputs   = 3,
1815                 /* .audio_inputs= 1, */
1816                 .svhs           = NO_SVHS,
1817                 .gpiomask       = 7,
1818                 .muxsel         = MUXSEL(2, 3, 1, 1),
1819                 .gpiomux        = { 0, 1, 2, 3},
1820                 .gpiomute       = 4,
1821                 .tuner_type     = TUNER_PHILIPS_PAL,
1822                 .tuner_addr     = ADDR_UNSET,
1823                 .pll            = PLL_28,
1824         },
1825         [BTTV_BOARD_EURESYS_PICOLO] = {
1826                 .name           = "Euresys Picolo",
1827                 .video_inputs   = 3,
1828                 /* .audio_inputs= 0, */
1829                 .svhs           = 2,
1830                 .gpiomask       = 0,
1831                 .no_msp34xx     = 1,
1832                 .no_tda7432     = 1,
1833                 .muxsel         = MUXSEL(2, 0, 1),
1834                 .pll            = PLL_28,
1835                 .tuner_type     = TUNER_ABSENT,
1836                 .tuner_addr     = ADDR_UNSET,
1837         },
1838         [BTTV_BOARD_PV150] = {
1839                 /* Luc Van Hoeylandt <luc@e-magic.be> */
1840                 .name           = "ProVideo PV150", /* 0x4f */
1841                 .video_inputs   = 2,
1842                 /* .audio_inputs= 0, */
1843                 .svhs           = NO_SVHS,
1844                 .gpiomask       = 0,
1845                 .muxsel         = MUXSEL(2, 3),
1846                 .gpiomux        = { 0 },
1847                 .no_msp34xx     = 1,
1848                 .pll            = PLL_28,
1849                 .tuner_type     = TUNER_ABSENT,
1850                 .tuner_addr     = ADDR_UNSET,
1851         },
1852         [BTTV_BOARD_AD_TVK503] = {
1853                 /* Hiroshi Takekawa <sian@big.or.jp> */
1854                 /* This card lacks subsystem ID */
1855                 .name           = "AD-TVK503", /* 0x63 */
1856                 .video_inputs   = 4,
1857                 /* .audio_inputs= 1, */
1858                 .svhs           = 2,
1859                 .gpiomask       = 0x001e8007,
1860                 .muxsel         = MUXSEL(2, 3, 1, 0),
1861                 /*                  Tuner, Radio, external, internal, off,  on */
1862                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1863                 .gpiomute       = 0x0f,
1864                 .no_msp34xx     = 1,
1865                 .pll            = PLL_28,
1866                 .tuner_type     = TUNER_PHILIPS_NTSC,
1867                 .tuner_addr     = ADDR_UNSET,
1868                 .audio_mode_gpio= adtvk503_audio,
1869         },
1870
1871                 /* ---- card 0x64 ---------------------------------- */
1872         [BTTV_BOARD_HERCULES_SM_TV] = {
1873                 .name           = "Hercules Smart TV Stereo",
1874                 .video_inputs   = 4,
1875                 /* .audio_inputs= 1, */
1876                 .svhs           = 2,
1877                 .gpiomask       = 0x00,
1878                 .muxsel         = MUXSEL(2, 3, 1, 1),
1879                 .no_msp34xx     = 1,
1880                 .pll            = PLL_28,
1881                 .tuner_type     = TUNER_PHILIPS_PAL,
1882                 .tuner_addr     = ADDR_UNSET,
1883                 /* Notes:
1884                 - card lacks subsystem ID
1885                 - stereo variant w/ daughter board with tda9874a @0xb0
1886                 - Audio Routing:
1887                         always from tda9874 independent of GPIO (?)
1888                         external line in: unknown
1889                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1890                         hef4053 (instead 4052) for unknown function
1891                 */
1892         },
1893         [BTTV_BOARD_PACETV] = {
1894                 .name           = "Pace TV & Radio Card",
1895                 .video_inputs   = 4,
1896                 /* .audio_inputs= 1, */
1897                 .svhs           = 2,
1898                 /* Tuner, CVid, SVid, CVid over SVid connector */
1899                 .muxsel         = MUXSEL(2, 3, 1, 1),
1900                 .gpiomask       = 0,
1901                 .no_tda7432     = 1,
1902                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1903                 .tuner_addr     = ADDR_UNSET,
1904                 .has_radio      = 1,
1905                 .pll            = PLL_28,
1906                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1907                 only internal line out: (4pin header) RGGL
1908                 Radio must be decoded by msp3410d (not routed through)*/
1909                 /*
1910                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1911                 */
1912         },
1913         [BTTV_BOARD_IVC200] = {
1914                 /* Chris Willing <chris@vislab.usyd.edu.au> */
1915                 .name           = "IVC-200",
1916                 .video_inputs   = 1,
1917                 /* .audio_inputs= 0, */
1918                 .tuner_type     = TUNER_ABSENT,
1919                 .tuner_addr     = ADDR_UNSET,
1920                 .svhs           = NO_SVHS,
1921                 .gpiomask       = 0xdf,
1922                 .muxsel         = MUXSEL(2),
1923                 .pll            = PLL_28,
1924         },
1925         [BTTV_BOARD_IVCE8784] = {
1926                 .name           = "IVCE-8784",
1927                 .video_inputs   = 1,
1928                 /* .audio_inputs= 0, */
1929                 .tuner_type     = TUNER_ABSENT,
1930                 .tuner_addr     = ADDR_UNSET,
1931                 .svhs           = NO_SVHS,
1932                 .gpiomask       = 0xdf,
1933                 .muxsel         = MUXSEL(2),
1934                 .pll            = PLL_28,
1935         },
1936         [BTTV_BOARD_XGUARD] = {
1937                 .name           = "Grand X-Guard / Trust 814PCI",
1938                 .video_inputs   = 16,
1939                 /* .audio_inputs= 0, */
1940                 .svhs           = NO_SVHS,
1941                 .tuner_type     = TUNER_ABSENT,
1942                 .tuner_addr     = ADDR_UNSET,
1943                 .gpiomask2      = 0xff,
1944                 .muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1945                 .muxsel_hook    = xguard_muxsel,
1946                 .no_msp34xx     = 1,
1947                 .no_tda7432     = 1,
1948                 .pll            = PLL_28,
1949         },
1950
1951                 /* ---- card 0x68 ---------------------------------- */
1952         [BTTV_BOARD_NEBULA_DIGITV] = {
1953                 .name           = "Nebula Electronics DigiTV",
1954                 .video_inputs   = 1,
1955                 .svhs           = NO_SVHS,
1956                 .muxsel         = MUXSEL(2, 3, 1, 0),
1957                 .no_msp34xx     = 1,
1958                 .no_tda7432     = 1,
1959                 .pll            = PLL_28,
1960                 .tuner_type     = TUNER_ABSENT,
1961                 .tuner_addr     = ADDR_UNSET,
1962                 .has_dvb        = 1,
1963                 .has_remote     = 1,
1964                 .gpiomask       = 0x1b,
1965                 .no_gpioirq     = 1,
1966         },
1967         [BTTV_BOARD_PV143] = {
1968                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1969                 .name           = "ProVideo PV143",
1970                 .video_inputs   = 4,
1971                 /* .audio_inputs= 0, */
1972                 .svhs           = NO_SVHS,
1973                 .gpiomask       = 0,
1974                 .muxsel         = MUXSEL(2, 3, 1, 0),
1975                 .gpiomux        = { 0 },
1976                 .no_msp34xx     = 1,
1977                 .pll            = PLL_28,
1978                 .tuner_type     = TUNER_ABSENT,
1979                 .tuner_addr     = ADDR_UNSET,
1980         },
1981         [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
1982                 /* M.Klahr@phytec.de */
1983                 .name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
1984                 .video_inputs   = 4,
1985                 /* .audio_inputs= 0, */
1986                 .svhs           = 3,
1987                 .gpiomask       = 0x00,
1988                 .muxsel         = MUXSEL(2, 3, 1, 0),
1989                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
1990                 .pll            = PLL_28,
1991                 .tuner_type     = TUNER_ABSENT,
1992                 .tuner_addr     = ADDR_UNSET,
1993         },
1994         [BTTV_BOARD_VD009X1_VD011_COMBI] = {
1995                 .name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
1996                 .video_inputs   = 4,
1997                 /* .audio_inputs= 0, */
1998                 .svhs           = 3,
1999                 .gpiomask       = 0x00,
2000                 .muxsel         = MUXSEL(2, 3, 1, 1),
2001                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2002                 .pll            = PLL_28,
2003                 .tuner_type     = TUNER_ABSENT,
2004                 .tuner_addr     = ADDR_UNSET,
2005         },
2006
2007                 /* ---- card 0x6c ---------------------------------- */
2008         [BTTV_BOARD_VD009_MINIDIN] = {
2009                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2010                 .video_inputs   = 10,
2011                 /* .audio_inputs= 0, */
2012                 .svhs           = 9,
2013                 .gpiomask       = 0x00,
2014                 .gpiomask2      = 0x03, /* used for external video mux */
2015                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2016                 .muxsel_hook    = phytec_muxsel,
2017                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2018                 .pll            = PLL_28,
2019                 .tuner_type     = TUNER_ABSENT,
2020                 .tuner_addr     = ADDR_UNSET,
2021         },
2022         [BTTV_BOARD_VD009_COMBI] = {
2023                 .name           = "PHYTEC VD-009 Combi (bt878)",
2024                 .video_inputs   = 10,
2025                 /* .audio_inputs= 0, */
2026                 .svhs           = 9,
2027                 .gpiomask       = 0x00,
2028                 .gpiomask2      = 0x03, /* used for external video mux */
2029                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2030                 .muxsel_hook    = phytec_muxsel,
2031                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2032                 .pll            = PLL_28,
2033                 .tuner_type     = TUNER_ABSENT,
2034                 .tuner_addr     = ADDR_UNSET,
2035         },
2036         [BTTV_BOARD_IVC100] = {
2037                 .name           = "IVC-100",
2038                 .video_inputs   = 4,
2039                 /* .audio_inputs= 0, */
2040                 .tuner_type     = TUNER_ABSENT,
2041                 .tuner_addr     = ADDR_UNSET,
2042                 .svhs           = NO_SVHS,
2043                 .gpiomask       = 0xdf,
2044                 .muxsel         = MUXSEL(2, 3, 1, 0),
2045                 .pll            = PLL_28,
2046         },
2047         [BTTV_BOARD_IVC120] = {
2048                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2049                 .name           = "IVC-120G",
2050                 .video_inputs   = 16,
2051                 /* .audio_inputs= 0, */
2052                 .tuner_type     = TUNER_ABSENT,
2053                 .tuner_addr     = ADDR_UNSET,
2054                 .svhs           = NO_SVHS,   /* card has no svhs */
2055                 .no_msp34xx     = 1,
2056                 .no_tda7432     = 1,
2057                 .gpiomask       = 0x00,
2058                 .muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2059                 .muxsel_hook    = ivc120_muxsel,
2060                 .pll            = PLL_28,
2061         },
2062
2063                 /* ---- card 0x70 ---------------------------------- */
2064         [BTTV_BOARD_PC_HDTV] = {
2065                 .name           = "pcHDTV HD-2000 TV",
2066                 .video_inputs   = 4,
2067                 /* .audio_inputs= 1, */
2068                 .svhs           = 2,
2069                 .muxsel         = MUXSEL(2, 3, 1, 0),
2070                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2071                 .tuner_addr     = ADDR_UNSET,
2072                 .has_dvb        = 1,
2073         },
2074         [BTTV_BOARD_TWINHAN_DST] = {
2075                 .name           = "Twinhan DST + clones",
2076                 .no_msp34xx     = 1,
2077                 .no_tda7432     = 1,
2078                 .tuner_type     = TUNER_ABSENT,
2079                 .tuner_addr     = ADDR_UNSET,
2080                 .no_video       = 1,
2081                 .has_dvb        = 1,
2082         },
2083         [BTTV_BOARD_WINFASTVC100] = {
2084                 .name           = "Winfast VC100",
2085                 .video_inputs   = 3,
2086                 /* .audio_inputs= 0, */
2087                 .svhs           = 1,
2088                 /* Vid In, SVid In, Vid over SVid in connector */
2089                 .muxsel         = MUXSEL(3, 1, 1, 3),
2090                 .no_msp34xx     = 1,
2091                 .no_tda7432     = 1,
2092                 .tuner_type     = TUNER_ABSENT,
2093                 .tuner_addr     = ADDR_UNSET,
2094                 .pll            = PLL_28,
2095         },
2096         [BTTV_BOARD_TEV560] = {
2097                 .name           = "Teppro TEV-560/InterVision IV-560",
2098                 .video_inputs   = 3,
2099                 /* .audio_inputs= 1, */
2100                 .svhs           = 2,
2101                 .gpiomask       = 3,
2102                 .muxsel         = MUXSEL(2, 3, 1, 1),
2103                 .gpiomux        = { 1, 1, 1, 1 },
2104                 .tuner_type     = TUNER_PHILIPS_PAL,
2105                 .tuner_addr     = ADDR_UNSET,
2106                 .pll            = PLL_35,
2107         },
2108
2109                 /* ---- card 0x74 ---------------------------------- */
2110         [BTTV_BOARD_SIMUS_GVC1100] = {
2111                 .name           = "SIMUS GVC1100",
2112                 .video_inputs   = 4,
2113                 /* .audio_inputs= 0, */
2114                 .svhs           = NO_SVHS,
2115                 .tuner_type     = TUNER_ABSENT,
2116                 .tuner_addr     = ADDR_UNSET,
2117                 .pll            = PLL_28,
2118                 .muxsel         = MUXSEL(2, 2, 2, 2),
2119                 .gpiomask       = 0x3F,
2120                 .muxsel_hook    = gvc1100_muxsel,
2121         },
2122         [BTTV_BOARD_NGSTV_PLUS] = {
2123                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2124                 .name           = "NGS NGSTV+",
2125                 .video_inputs   = 3,
2126                 .svhs           = 2,
2127                 .gpiomask       = 0x008007,
2128                 .muxsel         = MUXSEL(2, 3, 0, 0),
2129                 .gpiomux        = { 0, 0, 0, 0 },
2130                 .gpiomute       = 0x000003,
2131                 .pll            = PLL_28,
2132                 .tuner_type     = TUNER_PHILIPS_PAL,
2133                 .tuner_addr     = ADDR_UNSET,
2134                 .has_remote     = 1,
2135         },
2136         [BTTV_BOARD_LMLBT4] = {
2137                 /* http://linuxmedialabs.com */
2138                 .name           = "LMLBT4",
2139                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2140                 /* .audio_inputs= 0, */
2141                 .svhs           = NO_SVHS,
2142                 .muxsel         = MUXSEL(2, 3, 1, 0),
2143                 .no_msp34xx     = 1,
2144                 .no_tda7432     = 1,
2145                 .tuner_type     = TUNER_ABSENT,
2146                 .tuner_addr     = ADDR_UNSET,
2147         },
2148         [BTTV_BOARD_TEKRAM_M205] = {
2149                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2150                 .name           = "Tekram M205 PRO",
2151                 .video_inputs   = 3,
2152                 /* .audio_inputs= 1, */
2153                 .tuner_type     = TUNER_PHILIPS_PAL,
2154                 .tuner_addr     = ADDR_UNSET,
2155                 .svhs           = 2,
2156                 .gpiomask       = 0x68,
2157                 .muxsel         = MUXSEL(2, 3, 1),
2158                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2159                 .pll            = PLL_28,
2160         },
2161
2162                 /* ---- card 0x78 ---------------------------------- */
2163         [BTTV_BOARD_CONTVFMI] = {
2164                 /* Javier Cendan Ares <jcendan@lycos.es> */
2165                 /* bt878 TV + FM without subsystem ID */
2166                 .name           = "Conceptronic CONTVFMi",
2167                 .video_inputs   = 3,
2168                 /* .audio_inputs= 1, */
2169                 .svhs           = 2,
2170                 .gpiomask       = 0x008007,
2171                 .muxsel         = MUXSEL(2, 3, 1, 1),
2172                 .gpiomux        = { 0, 1, 2, 2 },
2173                 .gpiomute       = 3,
2174                 .pll            = PLL_28,
2175                 .tuner_type     = TUNER_PHILIPS_PAL,
2176                 .tuner_addr     = ADDR_UNSET,
2177                 .has_remote     = 1,
2178                 .has_radio      = 1,
2179         },
2180         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2181                 /*Eric DEBIEF <debief@telemsa.com>*/
2182                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2183                 /*adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration*/
2184                 /*structure and #define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 in bttv.h*/
2185                 .name           = "Euresys Picolo Tetra",
2186                 .video_inputs   = 4,
2187                 /* .audio_inputs= 0, */
2188                 .svhs           = NO_SVHS,
2189                 .gpiomask       = 0,
2190                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2191                 .no_msp34xx     = 1,
2192                 .no_tda7432     = 1,
2193                 /*878A input is always MUX0, see above.*/
2194                 .muxsel         = MUXSEL(2, 2, 2, 2),
2195                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2196                 .pll            = PLL_28,
2197                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2198                 .tuner_type     = TUNER_ABSENT,
2199                 .tuner_addr     = ADDR_UNSET,
2200         },
2201         [BTTV_BOARD_SPIRIT_TV] = {
2202                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2203                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2204                 .name           = "Spirit TV Tuner",
2205                 .video_inputs   = 3,
2206                 /* .audio_inputs= 1, */
2207                 .svhs           = 2,
2208                 .gpiomask       = 0x0000000f,
2209                 .muxsel         = MUXSEL(2, 1, 1),
2210                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2211                 .tuner_type     = TUNER_TEMIC_PAL,
2212                 .tuner_addr     = ADDR_UNSET,
2213                 .no_msp34xx     = 1,
2214         },
2215         [BTTV_BOARD_AVDVBT_771] = {
2216                 /* Wolfram Joost <wojo@frokaschwei.de> */
2217                 .name           = "AVerMedia AVerTV DVB-T 771",
2218                 .video_inputs   = 2,
2219                 .svhs           = 1,
2220                 .tuner_type     = TUNER_ABSENT,
2221                 .tuner_addr     = ADDR_UNSET,
2222                 .muxsel         = MUXSEL(3, 3),
2223                 .no_msp34xx     = 1,
2224                 .no_tda7432     = 1,
2225                 .pll            = PLL_28,
2226                 .has_dvb        = 1,
2227                 .no_gpioirq     = 1,
2228                 .has_remote     = 1,
2229         },
2230                 /* ---- card 0x7c ---------------------------------- */
2231         [BTTV_BOARD_AVDVBT_761] = {
2232                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2233                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2234                 .name           = "AverMedia AverTV DVB-T 761",
2235                 .video_inputs   = 2,
2236                 .svhs           = 1,
2237                 .muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2238                 .no_msp34xx     = 1,
2239                 .no_tda7432     = 1,
2240                 .pll            = PLL_28,
2241                 .tuner_type     = TUNER_ABSENT,
2242                 .tuner_addr     = ADDR_UNSET,
2243                 .has_dvb        = 1,
2244                 .no_gpioirq     = 1,
2245                 .has_remote     = 1,
2246         },
2247         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2248                 /* andre.schwarz@matrix-vision.de */
2249                 .name           = "MATRIX Vision Sigma-SQ",
2250                 .video_inputs   = 16,
2251                 /* .audio_inputs= 0, */
2252                 .svhs           = NO_SVHS,
2253                 .gpiomask       = 0x0,
2254                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2255                 .muxsel_hook    = sigmaSQ_muxsel,
2256                 .gpiomux        = { 0 },
2257                 .no_msp34xx     = 1,
2258                 .pll            = PLL_28,
2259                 .tuner_type     = TUNER_ABSENT,
2260                 .tuner_addr     = ADDR_UNSET,
2261         },
2262         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2263                 /* andre.schwarz@matrix-vision.de */
2264                 .name           = "MATRIX Vision Sigma-SLC",
2265                 .video_inputs   = 4,
2266                 /* .audio_inputs= 0, */
2267                 .svhs           = NO_SVHS,
2268                 .gpiomask       = 0x0,
2269                 .muxsel         = MUXSEL(2, 2, 2, 2),
2270                 .muxsel_hook    = sigmaSLC_muxsel,
2271                 .gpiomux        = { 0 },
2272                 .no_msp34xx     = 1,
2273                 .pll            = PLL_28,
2274                 .tuner_type     = TUNER_ABSENT,
2275                 .tuner_addr     = ADDR_UNSET,
2276         },
2277                 /* BTTV_BOARD_APAC_VIEWCOMP */
2278         [BTTV_BOARD_APAC_VIEWCOMP] = {
2279                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2280                 /* bt878 TV + FM 0x00000000 subsystem ID */
2281                 .name           = "APAC Viewcomp 878(AMAX)",
2282                 .video_inputs   = 2,
2283                 /* .audio_inputs= 1, */
2284                 .svhs           = NO_SVHS,
2285                 .gpiomask       = 0xFF,
2286                 .muxsel         = MUXSEL(2, 3, 1, 1),
2287                 .gpiomux        = { 2, 0, 0, 0 },
2288                 .gpiomute       = 10,
2289                 .pll            = PLL_28,
2290                 .tuner_type     = TUNER_PHILIPS_PAL,
2291                 .tuner_addr     = ADDR_UNSET,
2292                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2293                 .has_radio      = 1,   /* not every card has radio */
2294         },
2295
2296                 /* ---- card 0x80 ---------------------------------- */
2297         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2298                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2299                 .name           = "DViCO FusionHDTV DVB-T Lite",
2300                 .no_msp34xx     = 1,
2301                 .no_tda7432     = 1,
2302                 .pll            = PLL_28,
2303                 .no_video       = 1,
2304                 .has_dvb        = 1,
2305                 .tuner_type     = TUNER_ABSENT,
2306                 .tuner_addr     = ADDR_UNSET,
2307         },
2308         [BTTV_BOARD_VGEAR_MYVCD] = {
2309                 /* Steven <photon38@pchome.com.tw> */
2310                 .name           = "V-Gear MyVCD",
2311                 .video_inputs   = 3,
2312                 /* .audio_inputs= 1, */
2313                 .svhs           = 2,
2314                 .gpiomask       = 0x3f,
2315                 .muxsel         = MUXSEL(2, 3, 1, 0),
2316                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2317                 .gpiomute       = 0x31,
2318                 .no_msp34xx     = 1,
2319                 .pll            = PLL_28,
2320                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2321                 .tuner_addr     = ADDR_UNSET,
2322                 .has_radio      = 0,
2323         },
2324         [BTTV_BOARD_SUPER_TV] = {
2325                 /* Rick C <cryptdragoon@gmail.com> */
2326                 .name           = "Super TV Tuner",
2327                 .video_inputs   = 4,
2328                 /* .audio_inputs= 1, */
2329                 .svhs           = 2,
2330                 .muxsel         = MUXSEL(2, 3, 1, 0),
2331                 .tuner_type     = TUNER_PHILIPS_NTSC,
2332                 .tuner_addr     = ADDR_UNSET,
2333                 .gpiomask       = 0x008007,
2334                 .gpiomux        = { 0, 0x000001,0,0 },
2335                 .has_radio      = 1,
2336         },
2337         [BTTV_BOARD_TIBET_CS16] = {
2338                 /* Chris Fanning <video4linux@haydon.net> */
2339                 .name           = "Tibet Systems 'Progress DVR' CS16",
2340                 .video_inputs   = 16,
2341                 /* .audio_inputs= 0, */
2342                 .svhs           = NO_SVHS,
2343                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2344                 .pll            = PLL_28,
2345                 .no_msp34xx     = 1,
2346                 .no_tda7432     = 1,
2347                 .tuner_type     = TUNER_ABSENT,
2348                 .tuner_addr     = ADDR_UNSET,
2349                 .muxsel_hook    = tibetCS16_muxsel,
2350         },
2351         [BTTV_BOARD_KODICOM_4400R] = {
2352                 /* Bill Brack <wbrack@mmm.com.hk> */
2353                 /*
2354                 * Note that, because of the card's wiring, the "master"
2355                 * BT878A chip (i.e. the one which controls the analog switch
2356                 * and must use this card type) is the 2nd one detected.  The
2357                 * other 3 chips should use card type 0x85, whose description
2358                 * follows this one.  There is a EEPROM on the card (which is
2359                 * connected to the I2C of one of those other chips), but is
2360                 * not currently handled.  There is also a facility for a
2361                 * "monitor", which is also not currently implemented.
2362                 */
2363                 .name           = "Kodicom 4400R (master)",
2364                 .video_inputs   = 16,
2365                 /* .audio_inputs= 0, */
2366                 .tuner_type     = TUNER_ABSENT,
2367                 .tuner_addr     = ADDR_UNSET,
2368                 .svhs           = NO_SVHS,
2369                 /* GPIO bits 0-9 used for analog switch:
2370                 *   00 - 03:    camera selector
2371                 *   04 - 06:    channel (controller) selector
2372                 *   07: data (1->on, 0->off)
2373                 *   08: strobe
2374                 *   09: reset
2375                 * bit 16 is input from sync separator for the channel
2376                 */
2377                 .gpiomask       = 0x0003ff,
2378                 .no_gpioirq     = 1,
2379                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2380                 .pll            = PLL_28,
2381                 .no_msp34xx     = 1,
2382                 .no_tda7432     = 1,
2383                 .muxsel_hook    = kodicom4400r_muxsel,
2384         },
2385         [BTTV_BOARD_KODICOM_4400R_SL] = {
2386                 /* Bill Brack <wbrack@mmm.com.hk> */
2387                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2388                 * one which controls the analog switch, and must use the card type)
2389                 * is the 2nd one detected.  The other 3 chips should use this card
2390                 * type
2391                 */
2392                 .name           = "Kodicom 4400R (slave)",
2393                 .video_inputs   = 16,
2394                 /* .audio_inputs= 0, */
2395                 .tuner_type     = TUNER_ABSENT,
2396                 .tuner_addr     = ADDR_UNSET,
2397                 .svhs           = NO_SVHS,
2398                 .gpiomask       = 0x010000,
2399                 .no_gpioirq     = 1,
2400                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2401                 .pll            = PLL_28,
2402                 .no_msp34xx     = 1,
2403                 .no_tda7432     = 1,
2404                 .muxsel_hook    = kodicom4400r_muxsel,
2405         },
2406                 /* ---- card 0x86---------------------------------- */
2407         [BTTV_BOARD_ADLINK_RTV24] = {
2408                 /* Michael Henson <mhenson@clarityvi.com> */
2409                 /* Adlink RTV24 with special unlock codes */
2410                 .name           = "Adlink RTV24",
2411                 .video_inputs   = 4,
2412                 /* .audio_inputs= 1, */
2413                 .svhs           = 2,
2414                 .muxsel         = MUXSEL(2, 3, 1, 0),
2415                 .tuner_type     = UNSET,
2416                 .tuner_addr     = ADDR_UNSET,
2417                 .pll            = PLL_28,
2418         },
2419                 /* ---- card 0x87---------------------------------- */
2420         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2421                 /* Michael Krufky <mkrufky@linuxtv.org> */
2422                 .name           = "DViCO FusionHDTV 5 Lite",
2423                 .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2424                 .tuner_addr     = ADDR_UNSET,
2425                 .video_inputs   = 3,
2426                 /* .audio_inputs= 1, */
2427                 .svhs           = 2,
2428                 .muxsel         = MUXSEL(2, 3, 1),
2429                 .gpiomask       = 0x00e00007,
2430                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2431                 .gpiomute       = 0x00c00007,
2432                 .no_msp34xx     = 1,
2433                 .no_tda7432     = 1,
2434                 .has_dvb        = 1,
2435         },
2436                 /* ---- card 0x88---------------------------------- */
2437         [BTTV_BOARD_ACORP_Y878F] = {
2438                 /* Mauro Carvalho Chehab <mchehab@kernel.org> */
2439                 .name           = "Acorp Y878F",
2440                 .video_inputs   = 3,
2441                 /* .audio_inputs= 1, */
2442                 .svhs           = 2,
2443                 .gpiomask       = 0x01fe00,
2444                 .muxsel         = MUXSEL(2, 3, 1, 1),
2445                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2446                 .gpiomute       = 0x002000,
2447                 .pll            = PLL_28,
2448                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2449                 .tuner_addr     = 0xc1 >>1,
2450                 .has_radio      = 1,
2451         },
2452                 /* ---- card 0x89 ---------------------------------- */
2453         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2454                 .name           = "Conceptronic CTVFMi v2",
2455                 .video_inputs   = 3,
2456                 /* .audio_inputs= 1, */
2457                 .svhs           = 2,
2458                 .gpiomask       = 0x001c0007,
2459                 .muxsel         = MUXSEL(2, 3, 1, 1),
2460                 .gpiomux        = { 0, 1, 2, 2 },
2461                 .gpiomute       = 3,
2462                 .pll            = PLL_28,
2463                 .tuner_type     = TUNER_TENA_9533_DI,
2464                 .tuner_addr     = ADDR_UNSET,
2465                 .has_remote     = 1,
2466                 .has_radio      = 1,
2467         },
2468                 /* ---- card 0x8a ---------------------------------- */
2469         [BTTV_BOARD_PV_BT878P_2E] = {
2470                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2471                 .video_inputs   = 5,
2472                 /* .audio_inputs= 1, */
2473                 .svhs           = 3,
2474                 .has_dig_in     = 1,
2475                 .gpiomask       = 0x01fe00,
2476                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2477                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2478                 .gpiomux        = { 0x00400, 0x10400, 0x04400, 0x80000 },
2479                 .gpiomute       = 0x12400,
2480                 .no_msp34xx     = 1,
2481                 .pll            = PLL_28,
2482                 .tuner_type     = TUNER_LG_PAL_FM,
2483                 .tuner_addr     = ADDR_UNSET,
2484                 .has_remote     = 1,
2485         },
2486                 /* ---- card 0x8b ---------------------------------- */
2487         [BTTV_BOARD_PV_M4900] = {
2488                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2489                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2490                 .video_inputs   = 3,
2491                 /* .audio_inputs= 1, */
2492                 .svhs           = 2,
2493                 .gpiomask       = 0x3f,
2494                 .muxsel         = MUXSEL(2, 3, 1, 1),
2495                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2496                 .gpiomute       = 0x29,
2497                 .no_msp34xx     = 1,
2498                 .pll            = PLL_28,
2499                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2500                 .tuner_addr     = ADDR_UNSET,
2501                 .has_radio      = 1,
2502                 .has_remote     = 1,
2503         },
2504                 /* ---- card 0x8c ---------------------------------- */
2505         /* Has four Bt878 chips behind a PCI bridge, each chip has:
2506              one external BNC composite input (mux 2)
2507              three internal composite inputs (unknown muxes)
2508              an 18-bit stereo A/D (CS5331A), which has:
2509                one external stereo unbalanced (RCA) audio connection
2510                one (or 3?) internal stereo balanced (XLR) audio connection
2511                input is selected via gpio to a 14052B mux
2512                  (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2513                gain is controlled via an X9221A chip on the I2C bus @0x28
2514                sample rate is controlled via gpio to an MK1413S
2515                  (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2516              There is neither a tuner nor an svideo input. */
2517         [BTTV_BOARD_OSPREY440]  = {
2518                 .name           = "Osprey 440",
2519                 .video_inputs   = 4,
2520                 /* .audio_inputs= 2, */
2521                 .svhs           = NO_SVHS,
2522                 .muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2523                 .gpiomask       = 0x303,
2524                 .gpiomute       = 0x000, /* int + 32kHz */
2525                 .gpiomux        = { 0, 0, 0x000, 0x100},
2526                 .pll            = PLL_28,
2527                 .tuner_type     = TUNER_ABSENT,
2528                 .tuner_addr     = ADDR_UNSET,
2529                 .no_msp34xx     = 1,
2530                 .no_tda7432     = 1,
2531         },
2532                 /* ---- card 0x8d ---------------------------------- */
2533         [BTTV_BOARD_ASOUND_SKYEYE] = {
2534                 .name           = "Asound Skyeye PCTV",
2535                 .video_inputs   = 3,
2536                 /* .audio_inputs= 1, */
2537                 .svhs           = 2,
2538                 .gpiomask       = 15,
2539                 .muxsel         = MUXSEL(2, 3, 1, 1),
2540                 .gpiomux        = { 2, 0, 0, 0 },
2541                 .gpiomute       = 1,
2542                 .pll            = PLL_28,
2543                 .tuner_type     = TUNER_PHILIPS_NTSC,
2544                 .tuner_addr     = ADDR_UNSET,
2545         },
2546                 /* ---- card 0x8e ---------------------------------- */
2547         [BTTV_BOARD_SABRENT_TVFM] = {
2548                 .name           = "Sabrent TV-FM (bttv version)",
2549                 .video_inputs   = 3,
2550                 /* .audio_inputs= 1, */
2551                 .svhs           = 2,
2552                 .gpiomask       = 0x108007,
2553                 .muxsel         = MUXSEL(2, 3, 1, 1),
2554                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2555                 .no_msp34xx     = 1,
2556                 .no_tda7432     = 1,
2557                 .pll            = PLL_28,
2558                 .tuner_type     = TUNER_TNF_5335MF,
2559                 .tuner_addr     = ADDR_UNSET,
2560                 .has_radio      = 1,
2561         },
2562         /* ---- card 0x8f ---------------------------------- */
2563         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2564                 .name           = "Hauppauge ImpactVCB (bt878)",
2565                 .video_inputs   = 4,
2566                 /* .audio_inputs= 0, */
2567                 .svhs           = NO_SVHS,
2568                 .gpiomask       = 0x0f, /* old: 7 */
2569                 .muxsel         = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2570                 .no_msp34xx     = 1,
2571                 .no_tda7432     = 1,
2572                 .tuner_type     = TUNER_ABSENT,
2573                 .tuner_addr     = ADDR_UNSET,
2574         },
2575         [BTTV_BOARD_MACHTV_MAGICTV] = {
2576                 /* Julian Calaby <julian.calaby@gmail.com>
2577                  * Slightly different from original MachTV definition (0x60)
2578
2579                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2580                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2581                  * properly (methinks) causing no keyup bits being set */
2582
2583                 .name           = "MagicTV", /* rebranded MachTV */
2584                 .video_inputs   = 3,
2585                 /* .audio_inputs= 1, */
2586                 .svhs           = 2,
2587                 .gpiomask       = 7,
2588                 .muxsel         = MUXSEL(2, 3, 1, 1),
2589                 .gpiomux        = { 0, 1, 2, 3 },
2590                 .gpiomute       = 4,
2591                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2592                 .tuner_addr     = ADDR_UNSET,
2593                 .pll            = PLL_28,
2594                 .has_radio      = 1,
2595                 .has_remote     = 1,
2596         },
2597         [BTTV_BOARD_SSAI_SECURITY] = {
2598                 .name           = "SSAI Security Video Interface",
2599                 .video_inputs   = 4,
2600                 /* .audio_inputs= 0, */
2601                 .svhs           = NO_SVHS,
2602                 .muxsel         = MUXSEL(0, 1, 2, 3),
2603                 .tuner_type     = TUNER_ABSENT,
2604                 .tuner_addr     = ADDR_UNSET,
2605         },
2606         [BTTV_BOARD_SSAI_ULTRASOUND] = {
2607                 .name           = "SSAI Ultrasound Video Interface",
2608                 .video_inputs   = 2,
2609                 /* .audio_inputs= 0, */
2610                 .svhs           = 1,
2611                 .muxsel         = MUXSEL(2, 0, 1, 3),
2612                 .tuner_type     = TUNER_ABSENT,
2613                 .tuner_addr     = ADDR_UNSET,
2614         },
2615         /* ---- card 0x94---------------------------------- */
2616         [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2617                 .name           = "DViCO FusionHDTV 2",
2618                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2619                 .tuner_addr     = ADDR_UNSET,
2620                 .video_inputs   = 3,
2621                 /* .audio_inputs= 1, */
2622                 .svhs           = 2,
2623                 .muxsel         = MUXSEL(2, 3, 1),
2624                 .gpiomask       = 0x00e00007,
2625                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2626                 .gpiomute       = 0x00c00007,
2627                 .no_msp34xx     = 1,
2628                 .no_tda7432     = 1,
2629         },
2630         /* ---- card 0x95---------------------------------- */
2631         [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2632                 .name           = "Typhoon TV-Tuner PCI (50684)",
2633                 .video_inputs   = 3,
2634                 /* .audio_inputs= 1, */
2635                 .svhs           = 2,
2636                 .gpiomask       = 0x3014f,
2637                 .muxsel         = MUXSEL(2, 3, 1, 1),
2638                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
2639                 .gpiomute       = 10,
2640                 .pll            = PLL_28,
2641                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2642                 .tuner_addr     = ADDR_UNSET,
2643         },
2644         [BTTV_BOARD_GEOVISION_GV600] = {
2645                 /* emhn@usb.ve */
2646                 .name           = "Geovision GV-600",
2647                 .video_inputs   = 16,
2648                 /* .audio_inputs= 0, */
2649                 .svhs           = NO_SVHS,
2650                 .gpiomask       = 0x0,
2651                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2652                 .muxsel_hook    = geovision_muxsel,
2653                 .gpiomux        = { 0 },
2654                 .no_msp34xx     = 1,
2655                 .pll            = PLL_28,
2656                 .tuner_type     = TUNER_ABSENT,
2657                 .tuner_addr     = ADDR_UNSET,
2658         },
2659         [BTTV_BOARD_KOZUMI_KTV_01C] = {
2660                 /* Mauro Lacy <mauro@lacy.com.ar>
2661                  * Based on MagicTV and Conceptronic CONTVFMi */
2662
2663                 .name           = "Kozumi KTV-01C",
2664                 .video_inputs   = 3,
2665                 /* .audio_inputs= 1, */
2666                 .svhs           = 2,
2667                 .gpiomask       = 0x008007,
2668                 .muxsel         = MUXSEL(2, 3, 1, 1),
2669                 .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2670                 .gpiomute       = 3, /* CONTVFMi */
2671                 .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2672                 .tuner_addr     = ADDR_UNSET,
2673                 .pll            = PLL_28,
2674                 .has_radio      = 1,
2675                 .has_remote     = 1,
2676         },
2677         [BTTV_BOARD_ENLTV_FM_2] = {
2678                 /* Encore TV Tuner Pro ENL TV-FM-2
2679                    Mauro Carvalho Chehab <mchehab@kernel.org> */
2680                 .name           = "Encore ENL TV-FM-2",
2681                 .video_inputs   = 3,
2682                 /* .audio_inputs= 1, */
2683                 .svhs           = 2,
2684                 /* bit 6          -> IR disabled
2685                    bit 18/17 = 00 -> mute
2686                                01 -> enable external audio input
2687                                10 -> internal audio input (mono?)
2688                                11 -> internal audio input
2689                  */
2690                 .gpiomask       = 0x060040,
2691                 .muxsel         = MUXSEL(2, 3, 3),
2692                 .gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2693                 .gpiomute       = 0,
2694                 .tuner_type     = TUNER_TCL_MF02GIP_5N,
2695                 .tuner_addr     = ADDR_UNSET,
2696                 .pll            = PLL_28,
2697                 .has_radio      = 1,
2698                 .has_remote     = 1,
2699         },
2700         [BTTV_BOARD_VD012] = {
2701                 /* D.Heer@Phytec.de */
2702                 .name           = "PHYTEC VD-012 (bt878)",
2703                 .video_inputs   = 4,
2704                 /* .audio_inputs= 0, */
2705                 .svhs           = NO_SVHS,
2706                 .gpiomask       = 0x00,
2707                 .muxsel         = MUXSEL(0, 2, 3, 1),
2708                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2709                 .pll            = PLL_28,
2710                 .tuner_type     = TUNER_ABSENT,
2711                 .tuner_addr     = ADDR_UNSET,
2712         },
2713         [BTTV_BOARD_VD012_X1] = {
2714                 /* D.Heer@Phytec.de */
2715                 .name           = "PHYTEC VD-012-X1 (bt878)",
2716                 .video_inputs   = 4,
2717                 /* .audio_inputs= 0, */
2718                 .svhs           = 3,
2719                 .gpiomask       = 0x00,
2720                 .muxsel         = MUXSEL(2, 3, 1),
2721                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2722                 .pll            = PLL_28,
2723                 .tuner_type     = TUNER_ABSENT,
2724                 .tuner_addr     = ADDR_UNSET,
2725         },
2726         [BTTV_BOARD_VD012_X2] = {
2727                 /* D.Heer@Phytec.de */
2728                 .name           = "PHYTEC VD-012-X2 (bt878)",
2729                 .video_inputs   = 4,
2730                 /* .audio_inputs= 0, */
2731                 .svhs           = 3,
2732                 .gpiomask       = 0x00,
2733                 .muxsel         = MUXSEL(3, 2, 1),
2734                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2735                 .pll            = PLL_28,
2736                 .tuner_type     = TUNER_ABSENT,
2737                 .tuner_addr     = ADDR_UNSET,
2738         },
2739         [BTTV_BOARD_GEOVISION_GV800S] = {
2740                 /* Bruno Christo <bchristo@inf.ufsm.br>
2741                  *
2742                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2743                  *      1 audio input  per BT878A = 4 audio inputs
2744                  *      4 video inputs per BT878A = 16 video inputs
2745                  * This is the first BT878A chip of the GV-800(S). It's the
2746                  * "master" chip and it controls the video inputs through an
2747                  * analog multiplexer (a CD22M3494) via some GPIO pins. The
2748                  * slaves should use card type 0x9e (following this one).
2749                  * There is a EEPROM on the card which is currently not handled.
2750                  * The audio input is not working yet.
2751                  */
2752                 .name           = "Geovision GV-800(S) (master)",
2753                 .video_inputs   = 4,
2754                 /* .audio_inputs= 1, */
2755                 .tuner_type     = TUNER_ABSENT,
2756                 .tuner_addr     = ADDR_UNSET,
2757                 .svhs           = NO_SVHS,
2758                 .gpiomask       = 0xf107f,
2759                 .no_gpioirq     = 1,
2760                 .muxsel         = MUXSEL(2, 2, 2, 2),
2761                 .pll            = PLL_28,
2762                 .no_msp34xx     = 1,
2763                 .no_tda7432     = 1,
2764                 .muxsel_hook    = gv800s_muxsel,
2765         },
2766         [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2767                 /* Bruno Christo <bchristo@inf.ufsm.br>
2768                  *
2769                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2770                  *      1 audio input  per BT878A = 4 audio inputs
2771                  *      4 video inputs per BT878A = 16 video inputs
2772                  * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2773                  * and should use this card type.
2774                  * The audio input is not working yet.
2775                  */
2776                 .name           = "Geovision GV-800(S) (slave)",
2777                 .video_inputs   = 4,
2778                 /* .audio_inputs= 1, */
2779                 .tuner_type     = TUNER_ABSENT,
2780                 .tuner_addr     = ADDR_UNSET,
2781                 .svhs           = NO_SVHS,
2782                 .gpiomask       = 0x00,
2783                 .no_gpioirq     = 1,
2784                 .muxsel         = MUXSEL(2, 2, 2, 2),
2785                 .pll            = PLL_28,
2786                 .no_msp34xx     = 1,
2787                 .no_tda7432     = 1,
2788                 .muxsel_hook    = gv800s_muxsel,
2789         },
2790         [BTTV_BOARD_PV183] = {
2791                 .name           = "ProVideo PV183", /* 0x9f */
2792                 .video_inputs   = 2,
2793                 /* .audio_inputs= 0, */
2794                 .svhs           = NO_SVHS,
2795                 .gpiomask       = 0,
2796                 .muxsel         = MUXSEL(2, 3),
2797                 .gpiomux        = { 0 },
2798                 .no_msp34xx     = 1,
2799                 .pll            = PLL_28,
2800                 .tuner_type     = TUNER_ABSENT,
2801                 .tuner_addr     = ADDR_UNSET,
2802         },
2803         /* ---- card 0xa0---------------------------------- */
2804         [BTTV_BOARD_TVT_TD3116] = {
2805                 .name           = "Tongwei Video Technology TD-3116",
2806                 .video_inputs   = 16,
2807                 .gpiomask       = 0xc00ff,
2808                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2809                 .muxsel_hook    = td3116_muxsel,
2810                 .svhs           = NO_SVHS,
2811                 .pll            = PLL_28,
2812                 .tuner_type     = TUNER_ABSENT,
2813         },
2814         [BTTV_BOARD_APOSONIC_WDVR] = {
2815                 .name           = "Aposonic W-DVR",
2816                 .video_inputs   = 4,
2817                 .svhs           = NO_SVHS,
2818                 .muxsel         = MUXSEL(2, 3, 1, 0),
2819                 .tuner_type     = TUNER_ABSENT,
2820         },
2821         [BTTV_BOARD_ADLINK_MPG24] = {
2822                 /* Adlink MPG24 */
2823                 .name           = "Adlink MPG24",
2824                 .video_inputs   = 1,
2825                 /* .audio_inputs= 1, */
2826                 .svhs           = NO_SVHS,
2827                 .muxsel         = MUXSEL(2, 2, 2, 2),
2828                 .tuner_type     = UNSET,
2829                 .tuner_addr     = ADDR_UNSET,
2830                 .pll            = PLL_28,
2831         },
2832         [BTTV_BOARD_BT848_CAP_14] = {
2833                 .name           = "Bt848 Capture 14MHz",
2834                 .video_inputs   = 4,
2835                 .svhs           = 2,
2836                 .muxsel         = MUXSEL(2, 3, 1, 0),
2837                 .pll            = PLL_14,
2838                 .tuner_type     = TUNER_ABSENT,
2839         },
2840         [BTTV_BOARD_CYBERVISION_CV06] = {
2841                 .name           = "CyberVision CV06 (SV)",
2842                 .video_inputs   = 4,
2843                 /* .audio_inputs= 0, */
2844                 .svhs           = NO_SVHS,
2845                 .muxsel         = MUXSEL(2, 3, 1, 0),
2846                 .pll            = PLL_28,
2847                 .tuner_type     = TUNER_ABSENT,
2848                 .tuner_addr     = ADDR_UNSET,
2849         },
2850         [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = {
2851                 /* Pojar George <geoubuntu@gmail.com> */
2852                 .name           = "Kworld V-Stream Xpert TV PVR878",
2853                 .video_inputs   = 3,
2854                 /* .audio_inputs= 1, */
2855                 .svhs           = 2,
2856                 .gpiomask       = 0x001c0007,
2857                 .muxsel         = MUXSEL(2, 3, 1, 1),
2858                 .gpiomux        = { 0, 1, 2, 2 },
2859                 .gpiomute       = 3,
2860                 .pll            = PLL_28,
2861                 .tuner_type     = TUNER_TENA_9533_DI,
2862                 .tuner_addr    = ADDR_UNSET,
2863                 .has_remote     = 1,
2864                 .has_radio      = 1,
2865         },
2866         /* ---- card 0xa6---------------------------------- */
2867         [BTTV_BOARD_PCI_8604PW] = {
2868                 /* PCI-8604PW with special unlock sequence */
2869                 .name           = "PCI-8604PW",
2870                 .video_inputs   = 2,
2871                 /* .audio_inputs= 0, */
2872                 .svhs           = NO_SVHS,
2873                 /* The second input is available on CN4, if populated.
2874                  * The other 5x2 header (CN2?) connects to the same inputs
2875                  * as the on-board BNCs */
2876                 .muxsel         = MUXSEL(2, 3),
2877                 .tuner_type     = TUNER_ABSENT,
2878                 .no_msp34xx     = 1,
2879                 .no_tda7432     = 1,
2880                 .pll            = PLL_35,
2881         },
2882 };
2883
2884 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2885
2886 /* ----------------------------------------------------------------------- */
2887
2888 static unsigned char eeprom_data[256];
2889
2890 /*
2891  * identify card
2892  */
2893 void bttv_idcard(struct bttv *btv)
2894 {
2895         unsigned int gpiobits;
2896         int i,type;
2897
2898         /* read PCI subsystem ID */
2899         btv->cardid  = btv->c.pci->subsystem_device << 16;
2900         btv->cardid |= btv->c.pci->subsystem_vendor;
2901
2902         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2903                 /* look for the card */
2904                 for (type = -1, i = 0; cards[i].id != 0; i++)
2905                         if (cards[i].id  == btv->cardid)
2906                                 type = i;
2907
2908                 if (type != -1) {
2909                         /* found it */
2910                         pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2911                                 btv->c.nr, cards[type].name, cards[type].cardnr,
2912                                 btv->cardid & 0xffff,
2913                                 (btv->cardid >> 16) & 0xffff);
2914                         btv->c.type = cards[type].cardnr;
2915                 } else {
2916                         /* 404 */
2917                         pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2918                                 btv->c.nr, btv->cardid & 0xffff,
2919                                 (btv->cardid >> 16) & 0xffff);
2920                         pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2921                 }
2922         }
2923
2924         /* let the user override the autodetected type */
2925         if (card[btv->c.nr] < bttv_num_tvcards)
2926                 btv->c.type=card[btv->c.nr];
2927
2928         /* print which card config we are using */
2929         pr_info("%d: using: %s [card=%d,%s]\n",
2930                 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2931                 card[btv->c.nr] < bttv_num_tvcards
2932                 ? "insmod option" : "autodetected");
2933
2934         /* overwrite gpio stuff ?? */
2935         if (UNSET == audioall && UNSET == audiomux[0])
2936                 return;
2937
2938         if (UNSET != audiomux[0]) {
2939                 gpiobits = 0;
2940                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2941                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2942                         gpiobits |= audiomux[i];
2943                 }
2944         } else {
2945                 gpiobits = audioall;
2946                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2947                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2948                 }
2949         }
2950         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2951         pr_info("%d: gpio config override: mask=0x%x, mux=",
2952                 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2953         for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2954                 pr_cont("%s0x%x",
2955                         i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2956         }
2957         pr_cont("\n");
2958 }
2959
2960 /*
2961  * (most) board specific initialisations goes here
2962  */
2963
2964 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2965 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2966 {
2967         int type = -1;
2968
2969         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2970                 type = BTTV_BOARD_MODTEC_205;
2971         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2972                 type = BTTV_BOARD_EURESYS_PICOLO;
2973         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2974                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2975
2976         if (-1 != type) {
2977                 btv->c.type = type;
2978                 pr_info("%d: detected by eeprom: %s [card=%d]\n",
2979                         btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2980         }
2981 }
2982
2983 static void flyvideo_gpio(struct bttv *btv)
2984 {
2985         int gpio, has_remote, has_radio, is_capture_only;
2986         int is_lr90, has_tda9820_tda9821;
2987         int tuner_type = UNSET, ttype;
2988
2989         gpio_inout(0xffffff, 0);
2990         udelay(8);  /* without this we would see the 0x1800 mask */
2991         gpio = gpio_read();
2992         /* FIXME: must restore OUR_EN ??? */
2993
2994         /* all cards provide GPIO info, some have an additional eeprom
2995          * LR50: GPIO coding can be found lower right CP1 .. CP9
2996          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2997          *       GPIO14-12: n.c.
2998          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2999
3000          * lowest 3 bytes are remote control codes (no handshake needed)
3001          * xxxFFF: No remote control chip soldered
3002          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3003          * Note: Some bits are Audio_Mask !
3004          */
3005         ttype = (gpio & 0x0f0000) >> 16;
3006         switch (ttype) {
3007         case 0x0:
3008                 tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3009                 break;
3010         case 0x2:
3011                 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3012                 break;
3013         case 0x4:
3014                 tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3015                 break;
3016         case 0x6:
3017                 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3018                 break;
3019         case 0xC:
3020                 tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3021                 break;
3022         default:
3023                 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
3024                 break;
3025         }
3026
3027         has_remote          =   gpio & 0x800000;
3028         has_radio           =   gpio & 0x400000;
3029         /*   unknown                   0x200000;
3030          *   unknown2                  0x100000; */
3031         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3032         has_tda9820_tda9821 = !(gpio & 0x004000);
3033         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3034         /*
3035          * gpio & 0x001000    output bit for audio routing */
3036
3037         if (is_capture_only)
3038                 tuner_type = TUNER_ABSENT; /* No tuner present */
3039
3040         pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3041                 btv->c.nr, has_radio ? "yes" : "no",
3042                 has_remote ? "yes" : "no", tuner_type, gpio);
3043         pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3044                 btv->c.nr, is_lr90 ? "yes" : "no",
3045                 has_tda9820_tda9821 ? "yes" : "no",
3046                 is_capture_only ? "yes" : "no");
3047
3048         if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3049                 btv->tuner_type = tuner_type;
3050         btv->has_radio = has_radio;
3051
3052         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3053          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3054          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3055         if (has_tda9820_tda9821)
3056                 btv->audio_mode_gpio = lt9415_audio;
3057         /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3058 }
3059
3060 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3061                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3062 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3063                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3064
3065 static void miro_pinnacle_gpio(struct bttv *btv)
3066 {
3067         int id,msp,gpio;
3068         char *info;
3069
3070         gpio_inout(0xffffff, 0);
3071         gpio = gpio_read();
3072         id   = ((gpio>>10) & 63) -1;
3073         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3074         if (id < 32) {
3075                 btv->tuner_type = miro_tunermap[id];
3076                 if (0 == (gpio & 0x20)) {
3077                         btv->has_radio = 1;
3078                         if (!miro_fmtuner[id]) {
3079                                 btv->has_tea575x = 1;
3080                                 btv->tea_gpio.wren = 6;
3081                                 btv->tea_gpio.most = 7;
3082                                 btv->tea_gpio.clk  = 8;
3083                                 btv->tea_gpio.data = 9;
3084                                 tea575x_init(btv);
3085                         }
3086                 } else {
3087                         btv->has_radio = 0;
3088                 }
3089                 if (-1 != msp) {
3090                         if (btv->c.type == BTTV_BOARD_MIRO)
3091                                 btv->c.type = BTTV_BOARD_MIROPRO;
3092                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3093                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3094                 }
3095                 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3096                         btv->c.nr, id+1, btv->tuner_type,
3097                         !btv->has_radio ? "no" :
3098                         (btv->has_tea575x ? "tea575x" : "fmtuner"),
3099                         (-1 == msp) ? "no" : "yes");
3100         } else {
3101                 /* new cards with microtune tuner */
3102                 id = 63 - id;
3103                 btv->has_radio = 0;
3104                 switch (id) {
3105                 case 1:
3106                         info = "PAL / mono";
3107                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3108                         break;
3109                 case 2:
3110                         info = "PAL+SECAM / stereo";
3111                         btv->has_radio = 1;
3112                         btv->tda9887_conf = TDA9887_QSS;
3113                         break;
3114                 case 3:
3115                         info = "NTSC / stereo";
3116                         btv->has_radio = 1;
3117                         btv->tda9887_conf = TDA9887_QSS;
3118                         break;
3119                 case 4:
3120                         info = "PAL+SECAM / mono";
3121                         btv->tda9887_conf = TDA9887_QSS;
3122                         break;
3123                 case 5:
3124                         info = "NTSC / mono";
3125                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3126                         break;
3127                 case 6:
3128                         info = "NTSC / stereo";
3129                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3130                         break;
3131                 case 7:
3132                         info = "PAL / stereo";
3133                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3134                         break;
3135                 default:
3136                         info = "oops: unknown card";
3137                         break;
3138                 }
3139                 if (-1 != msp)
3140                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3141                 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3142                         btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3143                 btv->tuner_type = TUNER_MT2032;
3144         }
3145 }
3146
3147 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3148 #define LM1882_SYNC_DRIVE     0x200000L
3149
3150 static void init_ids_eagle(struct bttv *btv)
3151 {
3152         gpio_inout(0xffffff,0xFFFF37);
3153         gpio_write(0x200020);
3154
3155         /* flash strobe inverter ?! */
3156         gpio_write(0x200024);
3157
3158         /* switch sync drive off */
3159         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3160
3161         /* set BT848 muxel to 2 */
3162         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3163 }
3164
3165 /* Muxsel helper for the IDS Eagle.
3166  * the eagles does not use the standard muxsel-bits but
3167  * has its own multiplexer */
3168 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3169 {
3170         gpio_bits(3, input & 3);
3171
3172         /* composite */
3173         /* set chroma ADC to sleep */
3174         btor(BT848_ADC_C_SLEEP, BT848_ADC);
3175         /* set to composite video */
3176         btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3177         btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3178
3179         /* switch sync drive off */
3180         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3181 }
3182
3183 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3184 {
3185         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3186         gpio_write(masks[input%4]);
3187 }
3188
3189 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3190    alarms output
3191
3192    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3193    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3194
3195    IN - sensor inputs, INx - sensor inputs and TI XORed together
3196    O1,O2,O3 - alarm outputs (relays)
3197
3198    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3199
3200 */
3201
3202 static void init_lmlbt4x(struct bttv *btv)
3203 {
3204         pr_debug("LMLBT4x init\n");
3205         btwrite(0x000000, BT848_GPIO_REG_INP);
3206         gpio_inout(0xffffff, 0x0006C0);
3207         gpio_write(0x000000);
3208 }
3209
3210 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3211 {
3212         unsigned int inmux = input % 8;
3213         gpio_inout( 0xf, 0xf );
3214         gpio_bits( 0xf, inmux );
3215 }
3216
3217 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3218 {
3219         unsigned int inmux = input % 4;
3220         gpio_inout( 3<<9, 3<<9 );
3221         gpio_bits( 3<<9, inmux<<9 );
3222 }
3223
3224 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3225 {
3226         unsigned int inmux = input % 16;
3227         gpio_inout(0xf, 0xf);
3228         gpio_bits(0xf, inmux);
3229 }
3230
3231 /*
3232  * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3233  * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3234  * The muxes are controlled via a 74HC373 latch which is connected to
3235  * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3236  * Q0 of the latch is connected to the Enable (~E) input of the first
3237  * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3238  * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3239  */
3240
3241 static void td3116_latch_value(struct bttv *btv, u32 value)
3242 {
3243         gpio_bits((1<<18) | 0xff, value);
3244         gpio_bits((1<<18) | 0xff, (1<<18) | value);
3245         udelay(1);
3246         gpio_bits((1<<18) | 0xff, value);
3247 }
3248
3249 static void td3116_muxsel(struct bttv *btv, unsigned int input)
3250 {
3251         u32 value;
3252         u32 highbit;
3253
3254         highbit = (input & 0x8) >> 3 ;
3255
3256         /* Disable outputs and set value in the mux */
3257         value = 0x11; /* Disable outputs */
3258         value |= ((input & 0x7) << 1)  << (4 * highbit);
3259         td3116_latch_value(btv, value);
3260
3261         /* Enable the correct output */
3262         value &= ~0x11;
3263         value |= ((highbit ^ 0x1) << 4) | highbit;
3264         td3116_latch_value(btv, value);
3265 }
3266
3267 /* ----------------------------------------------------------------------- */
3268
3269 static void bttv_reset_audio(struct bttv *btv)
3270 {
3271         /*
3272          * BT878A has a audio-reset register.
3273          * 1. This register is an audio reset function but it is in
3274          *    function-0 (video capture) address space.
3275          * 2. It is enough to do this once per power-up of the card.
3276          * 3. There is a typo in the Conexant doc -- it is not at
3277          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3278          * --//Shrikumar 030609
3279          */
3280         if (btv->id != 878)
3281                 return;
3282
3283         if (bttv_debug)
3284                 pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3285         btwrite((1<<7), 0x058);
3286         udelay(10);
3287         btwrite(     0, 0x058);
3288 }
3289
3290 /* initialization part one -- before registering i2c bus */
3291 void bttv_init_card1(struct bttv *btv)
3292 {
3293         switch (btv->c.type) {
3294         case BTTV_BOARD_HAUPPAUGE:
3295         case BTTV_BOARD_HAUPPAUGE878:
3296                 boot_msp34xx(btv,5);
3297                 break;
3298         case BTTV_BOARD_VOODOOTV_200:
3299         case BTTV_BOARD_VOODOOTV_FM:
3300                 boot_msp34xx(btv,20);
3301                 break;
3302         case BTTV_BOARD_AVERMEDIA98:
3303                 boot_msp34xx(btv,11);
3304                 break;
3305         case BTTV_BOARD_HAUPPAUGEPVR:
3306                 pvr_boot(btv);
3307                 break;
3308         case BTTV_BOARD_TWINHAN_DST:
3309         case BTTV_BOARD_AVDVBT_771:
3310         case BTTV_BOARD_PINNACLESAT:
3311                 btv->use_i2c_hw = 1;
3312                 break;
3313         case BTTV_BOARD_ADLINK_RTV24:
3314                 init_RTV24( btv );
3315                 break;
3316         case BTTV_BOARD_PCI_8604PW:
3317                 init_PCI8604PW(btv);
3318                 break;
3319
3320         }
3321         if (!bttv_tvcards[btv->c.type].has_dvb)
3322                 bttv_reset_audio(btv);
3323 }
3324
3325 /* initialization part two -- after registering i2c bus */
3326 void bttv_init_card2(struct bttv *btv)
3327 {
3328         btv->tuner_type = UNSET;
3329
3330         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3331                 bttv_readee(btv,eeprom_data,0xa0);
3332                 identify_by_eeprom(btv,eeprom_data);
3333         }
3334
3335         switch (btv->c.type) {
3336         case BTTV_BOARD_MIRO:
3337         case BTTV_BOARD_MIROPRO:
3338         case BTTV_BOARD_PINNACLE:
3339         case BTTV_BOARD_PINNACLEPRO:
3340                 /* miro/pinnacle */
3341                 miro_pinnacle_gpio(btv);
3342                 break;
3343         case BTTV_BOARD_FLYVIDEO_98:
3344         case BTTV_BOARD_MAXI:
3345         case BTTV_BOARD_LIFE_FLYKIT:
3346         case BTTV_BOARD_FLYVIDEO:
3347         case BTTV_BOARD_TYPHOON_TVIEW:
3348         case BTTV_BOARD_CHRONOS_VS2:
3349         case BTTV_BOARD_FLYVIDEO_98FM:
3350         case BTTV_BOARD_FLYVIDEO2000:
3351         case BTTV_BOARD_FLYVIDEO98EZ:
3352         case BTTV_BOARD_CONFERENCETV:
3353         case BTTV_BOARD_LIFETEC_9415:
3354                 flyvideo_gpio(btv);
3355                 break;
3356         case BTTV_BOARD_HAUPPAUGE:
3357         case BTTV_BOARD_HAUPPAUGE878:
3358         case BTTV_BOARD_HAUPPAUGEPVR:
3359                 /* pick up some config infos from the eeprom */
3360                 bttv_readee(btv,eeprom_data,0xa0);
3361                 hauppauge_eeprom(btv);
3362                 break;
3363         case BTTV_BOARD_AVERMEDIA98:
3364         case BTTV_BOARD_AVPHONE98:
3365                 bttv_readee(btv,eeprom_data,0xa0);
3366                 avermedia_eeprom(btv);
3367                 break;
3368         case BTTV_BOARD_PXC200:
3369                 init_PXC200(btv);
3370                 break;
3371         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3372                 picolo_tetra_init(btv);
3373                 break;
3374         case BTTV_BOARD_VHX:
3375                 btv->has_radio    = 1;
3376                 btv->has_tea575x  = 1;
3377                 btv->tea_gpio.wren = 5;
3378                 btv->tea_gpio.most = 6;
3379                 btv->tea_gpio.clk  = 3;
3380                 btv->tea_gpio.data = 4;
3381                 tea575x_init(btv);
3382                 break;
3383         case BTTV_BOARD_VOBIS_BOOSTAR:
3384         case BTTV_BOARD_TERRATV:
3385                 terratec_active_radio_upgrade(btv);
3386                 break;
3387         case BTTV_BOARD_MAGICTVIEW061:
3388                 if (btv->cardid == 0x3002144f) {
3389                         btv->has_radio=1;
3390                         pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3391                                 btv->c.nr);
3392                 }
3393                 break;
3394         case BTTV_BOARD_STB2:
3395                 if (btv->cardid == 0x3060121a) {
3396                         /* Fix up entry for 3DFX VoodooTV 100,
3397                            which is an OEM STB card variant. */
3398                         btv->has_radio=0;
3399                         btv->tuner_type=TUNER_TEMIC_NTSC;
3400                 }
3401                 break;
3402         case BTTV_BOARD_OSPREY1x0:
3403         case BTTV_BOARD_OSPREY1x0_848:
3404         case BTTV_BOARD_OSPREY101_848:
3405         case BTTV_BOARD_OSPREY1x1:
3406         case BTTV_BOARD_OSPREY1x1_SVID:
3407         case BTTV_BOARD_OSPREY2xx:
3408         case BTTV_BOARD_OSPREY2x0_SVID:
3409         case BTTV_BOARD_OSPREY2x0:
3410         case BTTV_BOARD_OSPREY440:
3411         case BTTV_BOARD_OSPREY500:
3412         case BTTV_BOARD_OSPREY540:
3413         case BTTV_BOARD_OSPREY2000:
3414                 bttv_readee(btv,eeprom_data,0xa0);
3415                 osprey_eeprom(btv, eeprom_data);
3416                 break;
3417         case BTTV_BOARD_IDS_EAGLE:
3418                 init_ids_eagle(btv);
3419                 break;
3420         case BTTV_BOARD_MODTEC_205:
3421                 bttv_readee(btv,eeprom_data,0xa0);
3422                 modtec_eeprom(btv);
3423                 break;
3424         case BTTV_BOARD_LMLBT4:
3425                 init_lmlbt4x(btv);
3426                 break;
3427         case BTTV_BOARD_TIBET_CS16:
3428                 tibetCS16_init(btv);
3429                 break;
3430         case BTTV_BOARD_KODICOM_4400R:
3431                 kodicom4400r_init(btv);
3432                 break;
3433         case BTTV_BOARD_GEOVISION_GV800S:
3434                 gv800s_init(btv);
3435                 break;
3436         }
3437
3438         /* pll configuration */
3439         if (!(btv->id==848 && btv->revision==0x11)) {
3440                 /* defaults from card list */
3441                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3442                         btv->pll.pll_ifreq=28636363;
3443                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3444                 }
3445                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3446                         btv->pll.pll_ifreq=35468950;
3447                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3448                 }
3449                 if (PLL_14 == bttv_tvcards[btv->c.type].pll) {
3450                         btv->pll.pll_ifreq = 14318181;
3451                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3452                 }
3453                 /* insmod options can override */
3454                 switch (pll[btv->c.nr]) {
3455                 case 0: /* none */
3456                         btv->pll.pll_crystal = 0;
3457                         btv->pll.pll_ifreq   = 0;
3458                         btv->pll.pll_ofreq   = 0;
3459                         break;
3460                 case 1: /* 28 MHz */
3461                 case 28:
3462                         btv->pll.pll_ifreq   = 28636363;
3463                         btv->pll.pll_ofreq   = 0;
3464                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3465                         break;
3466                 case 2: /* 35 MHz */
3467                 case 35:
3468                         btv->pll.pll_ifreq   = 35468950;
3469                         btv->pll.pll_ofreq   = 0;
3470                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3471                         break;
3472                 case 3: /* 14 MHz */
3473                 case 14:
3474                         btv->pll.pll_ifreq   = 14318181;
3475                         btv->pll.pll_ofreq   = 0;
3476                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3477                         break;
3478                 }
3479         }
3480         btv->pll.pll_current = -1;
3481
3482         /* tuner configuration (from card list / autodetect / insmod option) */
3483         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3484                 if (UNSET == btv->tuner_type)
3485                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3486         if (UNSET != tuner[btv->c.nr])
3487                 btv->tuner_type = tuner[btv->c.nr];
3488
3489         if (btv->tuner_type == TUNER_ABSENT)
3490                 pr_info("%d: tuner absent\n", btv->c.nr);
3491         else if (btv->tuner_type == UNSET)
3492                 pr_warn("%d: tuner type unset\n", btv->c.nr);
3493         else
3494                 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3495
3496         if (autoload != UNSET) {
3497                 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3498                 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3499                         btv->c.nr);
3500         }
3501
3502         if (UNSET == btv->tuner_type)
3503                 btv->tuner_type = TUNER_ABSENT;
3504
3505         btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3506                    bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3507         btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3508                     UNSET : bttv_tvcards[btv->c.type].svhs;
3509         if (svhs[btv->c.nr] != UNSET)
3510                 btv->svhs = svhs[btv->c.nr];
3511         if (remote[btv->c.nr] != UNSET)
3512                 btv->has_remote = remote[btv->c.nr];
3513
3514         if (bttv_tvcards[btv->c.type].has_radio)
3515                 btv->has_radio = 1;
3516         if (bttv_tvcards[btv->c.type].has_remote)
3517                 btv->has_remote = 1;
3518         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3519                 btv->gpioirq = 1;
3520         if (bttv_tvcards[btv->c.type].volume_gpio)
3521                 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3522         if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3523                 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3524
3525         if (btv->tuner_type == TUNER_ABSENT)
3526                 return;  /* no tuner or related drivers to load */
3527
3528         if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3529                 /* Probe for RDS receiver chip */
3530                 static const unsigned short addrs[] = {
3531                         0x20 >> 1,
3532                         0x22 >> 1,
3533                         I2C_CLIENT_END
3534                 };
3535                 struct v4l2_subdev *sd;
3536
3537                 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3538                         &btv->c.i2c_adap, "saa6588", 0, addrs);
3539                 btv->has_saa6588 = (sd != NULL);
3540         }
3541
3542         /* try to detect audio/fader chips */
3543
3544         /* First check if the user specified the audio chip via a module
3545            option. */
3546
3547         switch (audiodev[btv->c.nr]) {
3548         case -1:
3549                 return; /* do not load any audio module */
3550
3551         case 0: /* autodetect */
3552                 break;
3553
3554         case 1: {
3555                 /* The user specified that we should probe for msp3400 */
3556                 static const unsigned short addrs[] = {
3557                         I2C_ADDR_MSP3400 >> 1,
3558                         I2C_ADDR_MSP3400_ALT >> 1,
3559                         I2C_CLIENT_END
3560                 };
3561
3562                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3563                         &btv->c.i2c_adap, "msp3400", 0, addrs);
3564                 if (btv->sd_msp34xx)
3565                         return;
3566                 goto no_audio;
3567         }
3568
3569         case 2: {
3570                 /* The user specified that we should probe for tda7432 */
3571                 static const unsigned short addrs[] = {
3572                         I2C_ADDR_TDA7432 >> 1,
3573                         I2C_CLIENT_END
3574                 };
3575
3576                 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3577                                 &btv->c.i2c_adap, "tda7432", 0, addrs))
3578                         return;
3579                 goto no_audio;
3580         }
3581
3582         case 3: {
3583                 /* The user specified that we should probe for tvaudio */
3584                 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3585                         &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3586                 if (btv->sd_tvaudio)
3587                         return;
3588                 goto no_audio;
3589         }
3590
3591         default:
3592                 pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3593                 return;
3594         }
3595
3596         /* There were no overrides, so now we try to discover this through the
3597            card definition */
3598
3599         /* probe for msp3400 first: this driver can detect whether or not
3600            it really is a msp3400, so it will return NULL when the device
3601            found is really something else (e.g. a tea6300). */
3602         if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3603                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3604                         &btv->c.i2c_adap, "msp3400",
3605                         0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3606         } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3607                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3608                         &btv->c.i2c_adap, "msp3400",
3609                         0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3610         }
3611
3612         /* If we found a msp34xx, then we're done. */
3613         if (btv->sd_msp34xx)
3614                 return;
3615
3616         /* Now see if we can find one of the tvaudio devices. */
3617         btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3618                 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3619         if (btv->sd_tvaudio) {
3620                 /* There may be two tvaudio chips on the card, so try to
3621                    find another. */
3622                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3623                         &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3624         }
3625
3626         /* it might also be a tda7432. */
3627         if (!bttv_tvcards[btv->c.type].no_tda7432) {
3628                 static const unsigned short addrs[] = {
3629                         I2C_ADDR_TDA7432 >> 1,
3630                         I2C_CLIENT_END
3631                 };
3632
3633                 btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3634                                 &btv->c.i2c_adap, "tda7432", 0, addrs);
3635                 if (btv->sd_tda7432)
3636                         return;
3637         }
3638         if (btv->sd_tvaudio)
3639                 return;
3640
3641 no_audio:
3642         pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3643 }
3644
3645
3646 /* initialize the tuner */
3647 void bttv_init_tuner(struct bttv *btv)
3648 {
3649         int addr = ADDR_UNSET;
3650
3651         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3652                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3653
3654         if (btv->tuner_type != TUNER_ABSENT) {
3655                 struct tuner_setup tun_setup;
3656
3657                 /* Load tuner module before issuing tuner config call! */
3658                 if (btv->has_radio)
3659                         v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3660                                 &btv->c.i2c_adap, "tuner",
3661                                 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3662                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3663                                 &btv->c.i2c_adap, "tuner",
3664                                 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3665                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3666                                 &btv->c.i2c_adap, "tuner",
3667                                 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3668
3669                 tun_setup.mode_mask = T_ANALOG_TV;
3670                 tun_setup.type = btv->tuner_type;
3671                 tun_setup.addr = addr;
3672
3673                 if (btv->has_radio)
3674                         tun_setup.mode_mask |= T_RADIO;
3675
3676                 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3677         }
3678
3679         if (btv->tda9887_conf) {
3680                 struct v4l2_priv_tun_config tda9887_cfg;
3681
3682                 tda9887_cfg.tuner = TUNER_TDA9887;
3683                 tda9887_cfg.priv = &btv->tda9887_conf;
3684
3685                 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3686         }
3687 }
3688
3689 /* ----------------------------------------------------------------------- */
3690
3691 static void modtec_eeprom(struct bttv *btv)
3692 {
3693         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3694                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3695                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3696                         btv->c.nr, &eeprom_data[0x1e]);
3697         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3698                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3699                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3700                         btv->c.nr, &eeprom_data[0x1e]);
3701         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3702                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3703                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3704                         btv->c.nr, &eeprom_data[0x1e]);
3705         } else {
3706                 pr_info("%d: Modtec: Unknown TunerString: %s\n",
3707                         btv->c.nr, &eeprom_data[0x1e]);
3708         }
3709 }
3710
3711 static void hauppauge_eeprom(struct bttv *btv)
3712 {
3713         struct tveeprom tv;
3714
3715         tveeprom_hauppauge_analog(&tv, eeprom_data);
3716         btv->tuner_type = tv.tuner_type;
3717         btv->has_radio  = tv.has_radio;
3718
3719         pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3720                 btv->c.nr, tv.model);
3721
3722         /*
3723          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3724          * type based on model #.
3725          */
3726         if(tv.model == 64900) {
3727                 pr_info("%d: Switching board type from %s to %s\n",
3728                         btv->c.nr,
3729                         bttv_tvcards[btv->c.type].name,
3730                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3731                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3732         }
3733
3734         /* The 61334 needs the msp3410 to do the radio demod to get sound */
3735         if (tv.model == 61334)
3736                 btv->radio_uses_msp_demodulator = 1;
3737 }
3738
3739 /* ----------------------------------------------------------------------- */
3740
3741 static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
3742 {
3743         struct bttv *btv = tea->private_data;
3744         struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3745         u16 val = 0;
3746
3747         val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0;
3748         val |= (pins & TEA575X_CLK)  ? (1 << gpio.clk)  : 0;
3749         val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0;
3750
3751         gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val);
3752         if (btv->mbox_ior) {
3753                 /* IOW and CSEL active */
3754                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3755                 udelay(5);
3756                 /* all inactive */
3757                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3758                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3759         }
3760 }
3761
3762 static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea)
3763 {
3764         struct bttv *btv = tea->private_data;
3765         struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3766         u8 ret = 0;
3767         u16 val;
3768
3769         if (btv->mbox_ior) {
3770                 /* IOR and CSEL active */
3771                 gpio_bits(btv->mbox_ior | btv->mbox_csel, 0);
3772                 udelay(5);
3773         }
3774         val = gpio_read();
3775         if (btv->mbox_ior) {
3776                 /* all inactive */
3777                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3778                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3779         }
3780
3781         if (val & (1 << gpio.data))
3782                 ret |= TEA575X_DATA;
3783         if (val & (1 << gpio.most))
3784                 ret |= TEA575X_MOST;
3785
3786         return ret;
3787 }
3788
3789 static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output)
3790 {
3791         struct bttv *btv = tea->private_data;
3792         struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3793         u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) |
3794                    (1 << gpio.most);
3795
3796         if (output)
3797                 gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) |
3798                                  (1 << gpio.wren));
3799         else
3800                 gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren));
3801 }
3802
3803 static const struct snd_tea575x_ops bttv_tea_ops = {
3804         .set_pins = bttv_tea575x_set_pins,
3805         .get_pins = bttv_tea575x_get_pins,
3806         .set_direction = bttv_tea575x_set_direction,
3807 };
3808
3809 static int tea575x_init(struct bttv *btv)
3810 {
3811         btv->tea.private_data = btv;
3812         btv->tea.ops = &bttv_tea_ops;
3813         if (!snd_tea575x_hw_init(&btv->tea)) {
3814                 pr_info("%d: detected TEA575x radio\n", btv->c.nr);
3815                 btv->tea.mute = false;
3816                 return 0;
3817         }
3818
3819         btv->has_tea575x = 0;
3820         btv->has_radio = 0;
3821
3822         return -ENODEV;
3823 }
3824
3825 /* ----------------------------------------------------------------------- */
3826
3827 static int terratec_active_radio_upgrade(struct bttv *btv)
3828 {
3829         btv->has_radio    = 1;
3830         btv->has_tea575x  = 1;
3831         btv->tea_gpio.wren = 4;
3832         btv->tea_gpio.most = 5;
3833         btv->tea_gpio.clk  = 3;
3834         btv->tea_gpio.data = 2;
3835
3836         btv->mbox_iow     = 1 <<  8;
3837         btv->mbox_ior     = 1 <<  9;
3838         btv->mbox_csel    = 1 << 10;
3839
3840         if (!tea575x_init(btv)) {
3841                 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3842                 btv->has_saa6588 = 1;
3843         }
3844
3845         return 0;
3846 }
3847
3848
3849 /* ----------------------------------------------------------------------- */
3850
3851 /*
3852  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3853  *
3854  * /*(DEBLOBBED)*/
3855 #define PVR_GPIO_DELAY          10
3856
3857 #define BTTV_ALT_DATA           0x000001
3858 #define BTTV_ALT_DCLK           0x100000
3859 #define BTTV_ALT_NCONFIG        0x800000
3860
3861 static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
3862 {
3863         u32 n;
3864         u8 bits;
3865         int i;
3866
3867         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3868         gpio_write(0);
3869         udelay(PVR_GPIO_DELAY);
3870
3871         gpio_write(BTTV_ALT_NCONFIG);
3872         udelay(PVR_GPIO_DELAY);
3873
3874         for (n = 0; n < microlen; n++) {
3875                 bits = micro[n];
3876                 for (i = 0 ; i < 8 ; i++) {
3877                         gpio_bits(BTTV_ALT_DCLK,0);
3878                         if (bits & 0x01)
3879                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3880                         else
3881                                 gpio_bits(BTTV_ALT_DATA,0);
3882                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3883                         bits >>= 1;
3884                 }
3885         }
3886         gpio_bits(BTTV_ALT_DCLK,0);
3887         udelay(PVR_GPIO_DELAY);
3888
3889         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3890         for (i = 0 ; i < 30 ; i++) {
3891                 gpio_bits(BTTV_ALT_DCLK,0);
3892                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3893         }
3894         gpio_bits(BTTV_ALT_DCLK,0);
3895         return 0;
3896 }
3897
3898 static int pvr_boot(struct bttv *btv)
3899 {
3900         const struct firmware *fw_entry;
3901         int rc;
3902
3903         rc = reject_firmware(&fw_entry, "/*(DEBLOBBED)*/", &btv->c.pci->dev);
3904         if (rc != 0) {
3905                 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3906                 return rc;
3907         }
3908         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3909         pr_info("%d: altera firmware upload %s\n",
3910                 btv->c.nr, (rc < 0) ? "failed" : "ok");
3911         release_firmware(fw_entry);
3912         return rc;
3913 }
3914
3915 /* ----------------------------------------------------------------------- */
3916 /* some osprey specific stuff                                              */
3917
3918 static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
3919 {
3920         int i;
3921         u32 serial = 0;
3922         int cardid = -1;
3923
3924         /* This code will never actually get called in this case.... */
3925         if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3926                 /* this might be an antique... check for MMAC label in eeprom */
3927                 if (!strncmp(ee, "MMAC", 4)) {
3928                         u8 checksum = 0;
3929                         for (i = 0; i < 21; i++)
3930                                 checksum += ee[i];
3931                         if (checksum != ee[21])
3932                                 return;
3933                         cardid = BTTV_BOARD_OSPREY1x0_848;
3934                         for (i = 12; i < 21; i++) {
3935                                 serial *= 10;
3936                                 serial += ee[i] - '0';
3937                         }
3938                 }
3939         } else {
3940                 unsigned short type;
3941
3942                 for (i = 4 * 16; i < 8 * 16; i += 16) {
3943                         u16 checksum = (__force u16)ip_compute_csum(ee + i, 16);
3944
3945                         if ((checksum & 0xff) + (checksum >> 8) == 0xff)
3946                                 break;
3947                 }
3948                 if (i >= 8*16)
3949                         return;
3950                 ee += i;
3951
3952                 /* found a valid descriptor */
3953                 type = get_unaligned_be16((__be16 *)(ee+4));
3954
3955                 switch(type) {
3956                 /* 848 based */
3957                 case 0x0004:
3958                         cardid = BTTV_BOARD_OSPREY1x0_848;
3959                         break;
3960                 case 0x0005:
3961                         cardid = BTTV_BOARD_OSPREY101_848;
3962                         break;
3963
3964                 /* 878 based */
3965                 case 0x0012:
3966                 case 0x0013:
3967                         cardid = BTTV_BOARD_OSPREY1x0;
3968                         break;
3969                 case 0x0014:
3970                 case 0x0015:
3971                         cardid = BTTV_BOARD_OSPREY1x1;
3972                         break;
3973                 case 0x0016:
3974                 case 0x0017:
3975                 case 0x0020:
3976                         cardid = BTTV_BOARD_OSPREY1x1_SVID;
3977                         break;
3978                 case 0x0018:
3979                 case 0x0019:
3980                 case 0x001E:
3981                 case 0x001F:
3982                         cardid = BTTV_BOARD_OSPREY2xx;
3983                         break;
3984                 case 0x001A:
3985                 case 0x001B:
3986                         cardid = BTTV_BOARD_OSPREY2x0_SVID;
3987                         break;
3988                 case 0x0040:
3989                         cardid = BTTV_BOARD_OSPREY500;
3990                         break;
3991                 case 0x0050:
3992                 case 0x0056:
3993                         cardid = BTTV_BOARD_OSPREY540;
3994                         /* bttv_osprey_540_init(btv); */
3995                         break;
3996                 case 0x0060:
3997                 case 0x0070:
3998                 case 0x00A0:
3999                         cardid = BTTV_BOARD_OSPREY2x0;
4000                         /* enable output on select control lines */
4001                         gpio_inout(0xffffff,0x000303);
4002                         break;
4003                 case 0x00D8:
4004                         cardid = BTTV_BOARD_OSPREY440;
4005                         break;
4006                 default:
4007                         /* unknown...leave generic, but get serial # */
4008                         pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
4009                                 btv->c.nr, type);
4010                         break;
4011                 }
4012                 serial = get_unaligned_be32((__be32 *)(ee+6));
4013         }
4014
4015         pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
4016                 btv->c.nr, cardid,
4017                 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
4018
4019         if (cardid<0 || btv->c.type == cardid)
4020                 return;
4021
4022         /* card type isn't set correctly */
4023         if (card[btv->c.nr] < bttv_num_tvcards) {
4024                 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
4025                         btv->c.nr);
4026         } else {
4027                 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
4028                         btv->c.nr, btv->c.type, cardid);
4029                 btv->c.type = cardid;
4030         }
4031 }
4032
4033 /* ----------------------------------------------------------------------- */
4034 /* AVermedia specific stuff, from  bktr_card.c                             */
4035
4036 static int tuner_0_table[] = {
4037         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
4038         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
4039         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
4040         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
4041         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
4042         TUNER_PHILIPS_FM1216ME_MK3 };
4043
4044 static int tuner_1_table[] = {
4045         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
4046         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4047         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4048         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
4049         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
4050
4051 static void avermedia_eeprom(struct bttv *btv)
4052 {
4053         int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
4054
4055         tuner_make      = (eeprom_data[0x41] & 0x7);
4056         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
4057         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
4058         btv->has_remote = (eeprom_data[0x42] & 0x01);
4059
4060         if (tuner_make == 0 || tuner_make == 2)
4061                 if (tuner_format <= 0x0a)
4062                         tuner_type = tuner_0_table[tuner_format];
4063         if (tuner_make == 1)
4064                 if (tuner_format <= 9)
4065                         tuner_type = tuner_1_table[tuner_format];
4066
4067         if (tuner_make == 4)
4068                 if (tuner_format == 0x09)
4069                         tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
4070
4071         pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
4072                 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
4073         if (tuner_type) {
4074                 btv->tuner_type = tuner_type;
4075                 pr_cont("%d", tuner_type);
4076         } else
4077                 pr_cont("Unknown type");
4078         pr_cont(" radio:%s remote control:%s\n",
4079                tuner_tv_fm     ? "yes" : "no",
4080                btv->has_remote ? "yes" : "no");
4081 }
4082
4083 /*
4084  * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
4085  * analog demod, which is not I2C controlled like the newer and more common
4086  * TDA9887 series.  Instead it has two tri-state input pins, S0 and S1,
4087  * that control the IF for the video and audio.  Apparently, bttv GPIO
4088  * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
4089  * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
4090  */
4091 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
4092 {
4093
4094         if (btv->audio_input == TVAUDIO_INPUT_TUNER) {
4095                 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
4096                         gpiobits |= 0x10000;
4097                 else
4098                         gpiobits &= ~0x10000;
4099         }
4100
4101         gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4102         return gpiobits;
4103 }
4104
4105
4106 /*
4107  * reset/enable the MSP on some Hauppauge cards
4108  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4109  *
4110  * Hauppauge:  pin  5
4111  * Voodoo:     pin 20
4112  */
4113 static void boot_msp34xx(struct bttv *btv, int pin)
4114 {
4115         int mask = (1 << pin);
4116
4117         gpio_inout(mask,mask);
4118         gpio_bits(mask,0);
4119         mdelay(2);
4120         udelay(500);
4121         gpio_bits(mask,mask);
4122
4123         if (bttv_gpio)
4124                 bttv_gpio_tracking(btv,"msp34xx");
4125         if (bttv_verbose)
4126                 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
4127                         btv->c.nr, pin);
4128 }
4129
4130 /* ----------------------------------------------------------------------- */
4131 /*  Imagenation L-Model PXC200 Framegrabber */
4132 /*  This is basically the same procedure as
4133  *  used by Alessandro Rubini in his pxc200
4134  *  driver, but using BTTV functions */
4135
4136 static void init_PXC200(struct bttv *btv)
4137 {
4138         static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
4139                               0x03, 0x04, 0x05, 0x06, 0x00 };
4140         unsigned int i;
4141         int tmp;
4142         u32 val;
4143
4144         /* Initialise GPIO-connected stuff */
4145         gpio_inout(0xffffff, (1<<13));
4146         gpio_write(0);
4147         udelay(3);
4148         gpio_write(1<<13);
4149         /* GPIO inputs are pulled up, so no need to drive
4150          * reset pin any longer */
4151         gpio_bits(0xffffff, 0);
4152         if (bttv_gpio)
4153                 bttv_gpio_tracking(btv,"pxc200");
4154
4155         /*  we could/should try and reset/control the AD pots? but
4156             right now  we simply  turned off the crushing.  Without
4157             this the AGC drifts drifts
4158             remember the EN is reverse logic -->
4159             setting BT848_ADC_AGC_EN disable the AGC
4160             tboult@eecs.lehigh.edu
4161         */
4162
4163         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4164
4165         /*      Initialise MAX517 DAC */
4166         pr_info("Setting DAC reference voltage level ...\n");
4167         bttv_I2CWrite(btv,0x5E,0,0x80,1);
4168
4169         /*      Initialise 12C508 PIC */
4170         /*      The I2CWrite and I2CRead commands are actually to the
4171          *      same chips - but the R/W bit is included in the address
4172          *      argument so the numbers are different */
4173
4174
4175         pr_info("Initialising 12C508 PIC chip ...\n");
4176
4177         /* First of all, enable the clock line. This is used in the PXC200-F */
4178         val = btread(BT848_GPIO_DMA_CTL);
4179         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4180         btwrite(val, BT848_GPIO_DMA_CTL);
4181
4182         /* Then, push to 0 the reset pin long enough to reset the *
4183          * device same as above for the reset line, but not the same
4184          * value sent to the GPIO-connected stuff
4185          * which one is the good one? */
4186         gpio_inout(0xffffff,(1<<2));
4187         gpio_write(0);
4188         udelay(10);
4189         gpio_write(1<<2);
4190
4191         for (i = 0; i < ARRAY_SIZE(vals); i++) {
4192                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4193                 if (tmp != -1) {
4194                         pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4195                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4196                 }
4197         }
4198
4199         pr_info("PXC200 Initialised\n");
4200 }
4201
4202
4203
4204 /* ----------------------------------------------------------------------- */
4205 /*
4206  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4207  *  it. This apparently involves the following procedure for each 878 chip:
4208  *
4209  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4210  *
4211  *  2)  write to GPIO_DATA
4212  *      - 0x0E
4213  *      - sleep 1ms
4214  *      - 0x10 + 0x0E
4215  *      - sleep 10ms
4216  *      - 0x0E
4217  *     read from GPIO_DATA into buf (uint_32)
4218  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4219  *                 error. ERROR_CPLD_Check_Failed stop.
4220  *
4221  *  3) write to GPIO_DATA
4222  *      - write 0x4400 + 0x0E
4223  *      - sleep 10ms
4224  *      - write 0x4410 + 0x0E
4225  *      - sleep 1ms
4226  *      - write 0x0E
4227  *     read from GPIO_DATA into buf (uint_32)
4228  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4229  *                error. ERROR_CPLD_Check_Failed.
4230  */
4231 /* ----------------------------------------------------------------------- */
4232 static void
4233 init_RTV24 (struct bttv *btv)
4234 {
4235         uint32_t dataRead = 0;
4236         long watchdog_value = 0x0E;
4237
4238         pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4239                 btv->c.nr);
4240
4241         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4242
4243         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4244         msleep (1);
4245         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4246         msleep (10);
4247         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4248
4249         dataRead = btread (BT848_GPIO_DATA);
4250
4251         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4252                 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4253                         btv->c.nr, dataRead);
4254         }
4255
4256         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4257         msleep (10);
4258         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4259         msleep (1);
4260         btwrite (watchdog_value, BT848_GPIO_DATA);
4261         msleep (1);
4262         dataRead = btread (BT848_GPIO_DATA);
4263
4264         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4265                 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4266                         btv->c.nr, dataRead);
4267
4268                 return;
4269         }
4270
4271         pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4272 }
4273
4274
4275
4276 /* ----------------------------------------------------------------------- */
4277 /*
4278  *  The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters
4279  *  the PCI REQ signals coming from the four BT878 chips. After power
4280  *  up, the CPLD does not forward requests to the bus, which prevents
4281  *  the BT878 from fetching RISC instructions from memory. While the
4282  *  CPLD is connected to most of the GPIOs of PCI device 0xD, only
4283  *  five appear to play a role in unlocking the REQ signal. The following
4284  *  sequence has been determined by trial and error without access to the
4285  *  original driver.
4286  *
4287  *  Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out).
4288  *  Devices 0xE and 0xF do not appear to have anything connected to their
4289  *  GPIOs.
4290  *
4291  *  The correct GPIO_OUT_EN value might have some more bits set. It should
4292  *  be possible to derive it from a boundary scan of the CPLD. Its JTAG
4293  *  pins are routed to test points.
4294  *
4295  */
4296 /* ----------------------------------------------------------------------- */
4297 static void
4298 init_PCI8604PW(struct bttv *btv)
4299 {
4300         int state;
4301
4302         if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) {
4303                 pr_warn("This is not a PCI-8604PW\n");
4304                 return;
4305         }
4306
4307         if (PCI_SLOT(btv->c.pci->devfn) != 0xD)
4308                 return;
4309
4310         btwrite(0x080002, BT848_GPIO_OUT_EN);
4311
4312         state = (btread(BT848_GPIO_DATA) >> 21) & 7;
4313
4314         for (;;) {
4315                 switch (state) {
4316                 case 1:
4317                 case 5:
4318                 case 6:
4319                 case 4:
4320                         pr_debug("PCI-8604PW in state %i, toggling pin\n",
4321                                  state);
4322                         btwrite(0x080000, BT848_GPIO_DATA);
4323                         msleep(1);
4324                         btwrite(0x000000, BT848_GPIO_DATA);
4325                         msleep(1);
4326                         break;
4327                 case 7:
4328                         pr_info("PCI-8604PW unlocked\n");
4329                         return;
4330                 case 0:
4331                         /* FIXME: If we are in state 7 and toggle GPIO[19] one
4332                            more time, the CPLD goes into state 0, where PCI bus
4333                            mastering is inhibited again. We have not managed to
4334                            get out of that state. */
4335
4336                         pr_err("PCI-8604PW locked until reset\n");
4337                         return;
4338                 default:
4339                         pr_err("PCI-8604PW in unknown state %i\n", state);
4340                         return;
4341                 }
4342
4343                 state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7);
4344
4345                 switch (state) {
4346                 case 0x15:
4347                 case 0x56:
4348                 case 0x64:
4349                 case 0x47:
4350                 /* The transition from state 7 to state 0 is, as explained
4351                    above, valid but undesired and with this code impossible
4352                    as we exit as soon as we are in state 7.
4353                 case 0x70: */
4354                         break;
4355                 default:
4356                         pr_err("PCI-8604PW invalid transition %i -> %i\n",
4357                                state >> 4, state & 7);
4358                         return;
4359                 }
4360                 state &= 7;
4361         }
4362 }
4363
4364 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4365  *
4366  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4367  * switch instead (CD22M3494E). This IC can have multiple active connections
4368  * between Xn (input) and Yn (output) pins. We need to clear any existing
4369  * connection prior to establish a new one, pulsing the STROBE pin.
4370  *
4371  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4372  * GPIO pins are wired as:
4373  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4374  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4375  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4376  *  GPIO[8]   -                  - P3[5] (microcontroller)
4377  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4378  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4379  *  GPINTR    -                  - P3[4] (microcontroller)
4380  *
4381  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4382  * configuration either directly (as we are doing) or using the microcontroller
4383  * which is also wired to I2C interface. I have no further info on the
4384  * microcontroller features, one would need to disassembly the firmware.
4385  * note: the vendor refused to give any information on this product, all
4386  *       that stuff was found using a multimeter! :)
4387  */
4388 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4389 {
4390         static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4391                                       0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4392
4393         gpio_bits(0x07f, muxgpio[input]);
4394
4395         /* reset all connections */
4396         gpio_bits(0x200,0x200);
4397         mdelay(1);
4398         gpio_bits(0x200,0x000);
4399         mdelay(1);
4400
4401         /* create a new connection */
4402         gpio_bits(0x480,0x480);
4403         mdelay(1);
4404         gpio_bits(0x480,0x080);
4405         mdelay(1);
4406 }
4407
4408 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4409  *
4410  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4411  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4412  * chips, ten eight input analog multiplexors, a not chip and a few
4413  * other components.
4414  *
4415  * 16 inputs on a secondary bracket are provided and can be selected
4416  * from each of the four capture chips.  Two of the eight input
4417  * multiplexors are used to select from any of the 16 input signals.
4418  *
4419  * Unsupported hardware capabilities:
4420  *  . A video output monitor on the secondary bracket can be selected from
4421  *    one of the 878A chips.
4422  *  . Another passthrough but I haven't spent any time investigating it.
4423  *  . Digital I/O (logic level connected to GPIO) is available from an
4424  *    onboard header.
4425  *
4426  * The on chip input mux should always be set to 2.
4427  * GPIO[16:19] - Video input selection
4428  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4429  * GPIO[?:?]   - Digital I/O.
4430  *
4431  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4432  * determined what function (if any) it provides.  With the microcontroller
4433  * and sync separator chips a guess is that it might have to do with video
4434  * switching and maybe some digital I/O.
4435  */
4436 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4437 {
4438         /* video mux */
4439         gpio_bits(0x0f0000, input << 16);
4440 }
4441
4442 static void tibetCS16_init(struct bttv *btv)
4443 {
4444         /* enable gpio bits, mask obtained via btSpy */
4445         gpio_inout(0xffffff, 0x0f7fff);
4446         gpio_write(0x0f7fff);
4447 }
4448
4449 /*
4450  * The following routines for the Kodicom-4400r get a little mind-twisting.
4451  * There is a "master" controller and three "slave" controllers, together
4452  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4453  * The analog switch is controlled by the "master", but the detection order
4454  * of the four BT878A chips is in an order which I just don't understand.
4455  * The "master" is actually the second controller to be detected.  The
4456  * logic on the board uses logical numbers for the 4 controllers, but
4457  * those numbers are different from the detection sequence.  When working
4458  * with the analog switch, we need to "map" from the detection sequence
4459  * over to the board's logical controller number.  This mapping sequence
4460  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4461  * unit 3, the second (which is the master) is logical unit 0, etc.
4462  * We need to maintain the status of the analog switch (which of the 16
4463  * cameras is connected to which of the 4 controllers) in sw_status array.
4464  */
4465
4466 /*
4467  * First a routine to set the analog switch, which controls which camera
4468  * is routed to which controller.  The switch comprises an X-address
4469  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4470  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4471  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4472  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4473  * specified address.  The idea is to set the address and data, then bring
4474  * STROBE high, and finally bring STROBE back to low.
4475  */
4476 static void kodicom4400r_write(struct bttv *btv,
4477                                unsigned char xaddr,
4478                                unsigned char yaddr,
4479                                unsigned char data) {
4480         unsigned int udata;
4481
4482         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4483         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4484         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4485         gpio_bits(0x1ff, udata);                /* strobe low */
4486 }
4487
4488 /*
4489  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4490  * use this routine.  The routine finds the "master" for the card, maps
4491  * the controller number from the detected position over to the logical
4492  * number, writes the appropriate data to the analog switch, and housekeeps
4493  * the local copy of the switch information.  The parameter 'input' is the
4494  * requested camera number (0 - 15).
4495  */
4496 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4497 {
4498         int xaddr, yaddr;
4499         struct bttv *mctlr;
4500         static unsigned char map[4] = {3, 0, 2, 1};
4501
4502         mctlr = master[btv->c.nr];
4503         if (mctlr == NULL) {    /* ignore if master not yet detected */
4504                 return;
4505         }
4506         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4507         yaddr = map[yaddr];
4508         xaddr = input & 0xf;
4509         /* Check if the controller/camera pair has changed, else ignore */
4510         if (mctlr->sw_status[yaddr] != xaddr)
4511         {
4512                 /* "open" the old switch, "close" the new one, save the new */
4513                 kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4514                 mctlr->sw_status[yaddr] = xaddr;
4515                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4516         }
4517 }
4518
4519 /*
4520  * During initialisation, we need to reset the analog switch.  We
4521  * also preset the switch to map the 4 connectors on the card to the
4522  * *user's* (see above description of kodicom4400r_muxsel) channels
4523  * 0 through 3
4524  */
4525 static void kodicom4400r_init(struct bttv *btv)
4526 {
4527         int ix;
4528
4529         gpio_inout(0x0003ff, 0x0003ff);
4530         gpio_write(1 << 9);     /* reset MUX */
4531         gpio_write(0);
4532         /* Preset camera 0 to the 4 controllers */
4533         for (ix = 0; ix < 4; ix++) {
4534                 btv->sw_status[ix] = ix;
4535                 kodicom4400r_write(btv, ix, ix, 1);
4536         }
4537         /*
4538          * Since this is the "master", we need to set up the
4539          * other three controller chips' pointers to this structure
4540          * for later use in the muxsel routine.
4541          */
4542         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4543             return;
4544         master[btv->c.nr-1] = btv;
4545         master[btv->c.nr]   = btv;
4546         master[btv->c.nr+1] = btv;
4547         master[btv->c.nr+2] = btv;
4548 }
4549
4550 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4551  * video multiplexers to provide up to 16 video inputs. These
4552  * multiplexers are controlled by the lower 8 GPIO pins of the
4553  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4554
4555  * xxx0 is pin xxx of multiplexer U5,
4556  * yyy1 is pin yyy of multiplexer U2
4557  */
4558 #define ENA0    0x01
4559 #define ENB0    0x02
4560 #define ENA1    0x04
4561 #define ENB1    0x08
4562
4563 #define IN10    0x10
4564 #define IN00    0x20
4565 #define IN11    0x40
4566 #define IN01    0x80
4567
4568 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4569 {
4570         static const int masks[] = {
4571                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4572                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4573                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4574                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4575         };
4576         gpio_write(masks[input%16]);
4577 }
4578 static void picolo_tetra_init(struct bttv *btv)
4579 {
4580         /*This is the video input redirection functionality : I DID NOT USE IT. */
4581         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4582         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4583 }
4584 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4585 {
4586
4587         dprintk("%d : picolo_tetra_muxsel =>  input = %d\n", btv->c.nr, input);
4588         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4589         /*GPIO[20]&GPIO[21] used to choose the right input*/
4590         btwrite (input<<20,BT848_GPIO_DATA);
4591
4592 }
4593
4594 /*
4595  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4596  *
4597  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4598  * switchers to provide 16 channels to MUX0. The TDA8540's have
4599  * 4 independent outputs and as such the IVC120G also has the
4600  * optional "Monitor Out" bus. This allows the card to be looking
4601  * at one input while the monitor is looking at another.
4602  *
4603  * Since I've couldn't be bothered figuring out how to add an
4604  * independent muxsel for the monitor bus, I've just set it to
4605  * whatever the card is looking at.
4606  *
4607  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4608  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4609  *
4610  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4611  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4612  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4613  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4614  *
4615  */
4616
4617 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4618 #define I2C_TDA8540        0x90
4619 #define I2C_TDA8540_ALT1   0x92
4620 #define I2C_TDA8540_ALT2   0x94
4621 #define I2C_TDA8540_ALT3   0x96
4622 #define I2C_TDA8540_ALT4   0x98
4623 #define I2C_TDA8540_ALT5   0x9a
4624 #define I2C_TDA8540_ALT6   0x9c
4625
4626 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4627 {
4628         /* Simple maths */
4629         int key = input % 4;
4630         int matrix = input / 4;
4631
4632         dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4633                 btv->c.nr, input, matrix, key);
4634
4635         /* Handles the input selection on the TDA8540's */
4636         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4637                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4638         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4639                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4640         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4641                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4642         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4643                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4644
4645         /* Handles the output enables on the TDA8540's */
4646         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4647                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4648         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4649                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4650         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4651                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4652         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4653                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4654
4655         /* 878's MUX0 is already selected for input via muxsel values */
4656 }
4657
4658
4659 /* PXC200 muxsel helper
4660  * luke@syseng.anu.edu.au
4661  * another transplant
4662  * from Alessandro Rubini (rubini@linux.it)
4663  *
4664  * There are 4 kinds of cards:
4665  * PXC200L which is bt848
4666  * PXC200F which is bt848 with PIC controlling mux
4667  * PXC200AL which is bt878
4668  * PXC200AF which is bt878 with PIC controlling mux
4669  */
4670 #define PX_CFG_PXC200F 0x01
4671 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4672 #define PX_I2C_PIC       0x0f
4673 #define PX_PXC200A_CARDID 0x200a1295
4674 #define PX_I2C_CMD_CFG   0x00
4675
4676 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4677 {
4678         int rc;
4679         long mux;
4680         int bitmask;
4681         unsigned char buf[2];
4682
4683         /* Read PIC config to determine if this is a PXC200F */
4684         /* PX_I2C_CMD_CFG*/
4685         buf[0]=0;
4686         buf[1]=0;
4687         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4688         if (rc) {
4689                 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4690                          btv->c.nr, rc);
4691           /* not PXC ? do nothing */
4692                 return;
4693         }
4694
4695         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4696         if (!(rc & PX_CFG_PXC200F)) {
4697                 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4698                          btv->c.nr, rc);
4699                 return;
4700         }
4701
4702
4703         /* The multiplexer in the 200F is handled by the GPIO port */
4704         /* get correct mapping between inputs  */
4705         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4706         /* ** not needed!?   */
4707         mux = input;
4708
4709         /* make sure output pins are enabled */
4710         /* bitmask=0x30f; */
4711         bitmask=0x302;
4712         /* check whether we have a PXC200A */
4713         if (btv->cardid == PX_PXC200A_CARDID)  {
4714            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4715            bitmask |= 7<<4; /* the DAC */
4716         }
4717         btwrite(bitmask, BT848_GPIO_OUT_EN);
4718
4719         bitmask = btread(BT848_GPIO_DATA);
4720         if (btv->cardid == PX_PXC200A_CARDID)
4721           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4722         else /* older device */
4723           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4724         btwrite(bitmask,BT848_GPIO_DATA);
4725
4726         /*
4727          * Was "to be safe, set the bt848 to input 0"
4728          * Actually, since it's ok at load time, better not messing
4729          * with these bits (on PXC200AF you need to set mux 2 here)
4730          *
4731          * needed because bttv-driver sets mux before calling this function
4732          */
4733         if (btv->cardid == PX_PXC200A_CARDID)
4734           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4735         else /* older device */
4736           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4737
4738         pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4739 }
4740
4741 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4742 {
4743         unsigned int mux = input % 4;
4744
4745         if (input == btv->svhs)
4746                 mux = 0;
4747
4748         gpio_bits(0x3, mux);
4749 }
4750
4751 /*
4752  * GeoVision GV-800(S) functions
4753  * Bruno Christo <bchristo@inf.ufsm.br>
4754 */
4755
4756 /* This is a function to control the analog switch, which determines which
4757  * camera is routed to which controller.  The switch comprises an X-address
4758  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4759  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4760  * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4761  * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4762  * specified address. There is also a chip select (gpio bit 16).
4763  * The idea is to set the address and chip select together, bring
4764  * STROBE high, write the data, and finally bring STROBE back to low.
4765  */
4766 static void gv800s_write(struct bttv *btv,
4767                          unsigned char xaddr,
4768                          unsigned char yaddr,
4769                          unsigned char data) {
4770         /* On the "master" 878A:
4771         * GPIO bits 0-9 are used for the analog switch:
4772         *   00 - 03:    camera selector
4773         *   04 - 06:    878A (controller) selector
4774         *   16:         cselect
4775         *   17:         strobe
4776         *   18:         data (1->on, 0->off)
4777         *   19:         reset
4778         */
4779         const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4780         const u32 CSELECT = 1<<16;
4781         const u32 STROBE = 1<<17;
4782         const u32 DATA = data<<18;
4783
4784         gpio_bits(0x1007f, ADDRESS | CSELECT);  /* write ADDRESS and CSELECT */
4785         gpio_bits(0x20000, STROBE);             /* STROBE high */
4786         gpio_bits(0x40000, DATA);               /* write DATA */
4787         gpio_bits(0x20000, ~STROBE);            /* STROBE low */
4788 }
4789
4790 /*
4791  * GeoVision GV-800(S) muxsel
4792  *
4793  * Each of the 4 cards (controllers) use this function.
4794  * The controller using this function selects the input through the GPIO pins
4795  * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4796  *
4797  * The parameter 'input' is the requested camera number (0-4) on the controller.
4798  * The map array has the address of each input. Note that the addresses in the
4799  * array are in the sequence the original GeoVision driver uses, that is, set
4800  * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4801  * the physical "camera 1" connector corresponds to controller 0 input 0,
4802  * "camera 2" corresponds to controller 1 input 0, and so on.
4803  *
4804  * After getting the input address, the function then writes the appropriate
4805  * data to the analog switch, and housekeeps the local copy of the switch
4806  * information.
4807  */
4808 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4809 {
4810         struct bttv *mctlr;
4811         int xaddr, yaddr;
4812         static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4813                                           { 0x1, 0x5, 0xb, 0x7 },
4814                                           { 0x2, 0x8, 0xc, 0xe },
4815                                           { 0x3, 0x9, 0xd, 0xf } };
4816         input = input%4;
4817         mctlr = master[btv->c.nr];
4818         if (mctlr == NULL) {
4819                 /* do nothing until the "master" is detected */
4820                 return;
4821         }
4822         yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4823         xaddr = map[yaddr][input] & 0xf;
4824
4825         /* Check if the controller/camera pair has changed, ignore otherwise */
4826         if (mctlr->sw_status[yaddr] != xaddr) {
4827                 /* disable the old switch, enable the new one and save status */
4828                 gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4829                 mctlr->sw_status[yaddr] = xaddr;
4830                 gv800s_write(mctlr, xaddr, yaddr, 1);
4831         }
4832 }
4833
4834 /* GeoVision GV-800(S) "master" chip init */
4835 static void gv800s_init(struct bttv *btv)
4836 {
4837         int ix;
4838
4839         gpio_inout(0xf107f, 0xf107f);
4840         gpio_write(1<<19); /* reset the analog MUX */
4841         gpio_write(0);
4842
4843         /* Preset camera 0 to the 4 controllers */
4844         for (ix = 0; ix < 4; ix++) {
4845                 btv->sw_status[ix] = ix;
4846                 gv800s_write(btv, ix, ix, 1);
4847         }
4848
4849         /* Inputs on the "master" controller need this brightness fix */
4850         bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4851
4852         if (btv->c.nr > BTTV_MAX-4)
4853                 return;
4854         /*
4855          * Store the "master" controller pointer in the master
4856          * array for later use in the muxsel function.
4857          */
4858         master[btv->c.nr]   = btv;
4859         master[btv->c.nr+1] = btv;
4860         master[btv->c.nr+2] = btv;
4861         master[btv->c.nr+3] = btv;
4862 }
4863
4864 /* ----------------------------------------------------------------------- */
4865 /* motherboard chipset specific stuff                                      */
4866
4867 void __init bttv_check_chipset(void)
4868 {
4869         int pcipci_fail = 0;
4870         struct pci_dev *dev = NULL;
4871
4872         if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
4873                 pcipci_fail = 1;
4874         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4875                 triton1 = 1;
4876         if (pci_pci_problems & PCIPCI_VSFX)
4877                 vsfx = 1;
4878 #ifdef PCIPCI_ALIMAGIK
4879         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4880                 latency = 0x0A;
4881 #endif
4882
4883
4884         /* print warnings about any quirks found */
4885         if (triton1)
4886                 pr_info("Host bridge needs ETBF enabled\n");
4887         if (vsfx)
4888                 pr_info("Host bridge needs VSFX enabled\n");
4889         if (pcipci_fail) {
4890                 pr_info("bttv and your chipset may not work together\n");
4891                 if (!no_overlay) {
4892                         pr_info("overlay will be disabled\n");
4893                         no_overlay = 1;
4894                 } else {
4895                         pr_info("overlay forced. Use this option at your own risk.\n");
4896                 }
4897         }
4898         if (UNSET != latency)
4899                 pr_info("pci latency fixup [%d]\n", latency);
4900         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4901                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4902                 unsigned char b;
4903                 pci_read_config_byte(dev, 0x53, &b);
4904                 if (bttv_debug)
4905                         pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4906                                 b);
4907         }
4908 }
4909
4910 int bttv_handle_chipset(struct bttv *btv)
4911 {
4912         unsigned char command;
4913
4914         if (!triton1 && !vsfx && UNSET == latency)
4915                 return 0;
4916
4917         if (bttv_verbose) {
4918                 if (triton1)
4919                         pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4920                                 btv->c.nr);
4921                 if (vsfx && btv->id >= 878)
4922                         pr_info("%d: enabling VSFX\n", btv->c.nr);
4923                 if (UNSET != latency)
4924                         pr_info("%d: setting pci timer to %d\n",
4925                                 btv->c.nr, latency);
4926         }
4927
4928         if (btv->id < 878) {
4929                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4930                 if (triton1)
4931                         btv->triton1 = BT848_INT_ETBF;
4932         } else {
4933                 /* bt878 has a bit in the pci config space for it */
4934                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4935                 if (triton1)
4936                         command |= BT878_EN_TBFX;
4937                 if (vsfx)
4938                         command |= BT878_EN_VSFX;
4939                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4940         }
4941         if (UNSET != latency)
4942                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4943         return 0;
4944 }