2 * tvp5150 - Texas Instruments TVP5150A/AM1 and TVP5151 video decoder driver
4 * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
5 * This code is placed under the terms of the GNU General Public License v2
8 #include <dt-bindings/media/tvp5150.h>
10 #include <linux/slab.h>
11 #include <linux/videodev2.h>
12 #include <linux/delay.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/module.h>
15 #include <media/v4l2-async.h>
16 #include <media/v4l2-device.h>
17 #include <media/v4l2-ctrls.h>
18 #include <media/v4l2-of.h>
19 #include <media/v4l2-mc.h>
21 #include "tvp5150_reg.h"
23 #define TVP5150_H_MAX 720U
24 #define TVP5150_V_MAX_525_60 480U
25 #define TVP5150_V_MAX_OTHERS 576U
26 #define TVP5150_MAX_CROP_LEFT 511
27 #define TVP5150_MAX_CROP_TOP 127
28 #define TVP5150_CROP_SHIFT 2
30 MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
31 MODULE_AUTHOR("Mauro Carvalho Chehab");
32 MODULE_LICENSE("GPL");
36 module_param(debug, int, 0644);
37 MODULE_PARM_DESC(debug, "Debug level (0-2)");
40 struct v4l2_subdev sd;
41 #ifdef CONFIG_MEDIA_CONTROLLER
42 struct media_pad pads[DEMOD_NUM_PADS];
43 struct media_entity input_ent[TVP5150_INPUT_NUM];
44 struct media_pad input_pad[TVP5150_INPUT_NUM];
46 struct v4l2_ctrl_handler hdl;
47 struct v4l2_rect rect;
49 v4l2_std_id norm; /* Current set standard */
57 enum v4l2_mbus_type mbus_type;
60 static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
62 return container_of(sd, struct tvp5150, sd);
65 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
67 return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
70 static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
72 struct i2c_client *c = v4l2_get_subdevdata(sd);
75 rc = i2c_smbus_read_byte_data(c, addr);
77 v4l2_err(sd, "i2c i/o error: rc == %d\n", rc);
81 v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, rc);
86 static int tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
89 struct i2c_client *c = v4l2_get_subdevdata(sd);
92 v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", addr, value);
93 rc = i2c_smbus_write_byte_data(c, addr, value);
95 v4l2_err(sd, "i2c i/o error: rc == %d\n", rc);
100 static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
101 const u8 end, int max_line)
105 while (init != (u8)(end + 1)) {
106 if ((i % max_line) == 0) {
109 printk("tvp5150: %s reg 0x%02x = ", s, init);
111 printk("%02x ", tvp5150_read(sd, init));
119 static int tvp5150_log_status(struct v4l2_subdev *sd)
121 printk("tvp5150: Video input source selection #1 = 0x%02x\n",
122 tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
123 printk("tvp5150: Analog channel controls = 0x%02x\n",
124 tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
125 printk("tvp5150: Operation mode controls = 0x%02x\n",
126 tvp5150_read(sd, TVP5150_OP_MODE_CTL));
127 printk("tvp5150: Miscellaneous controls = 0x%02x\n",
128 tvp5150_read(sd, TVP5150_MISC_CTL));
129 printk("tvp5150: Autoswitch mask= 0x%02x\n",
130 tvp5150_read(sd, TVP5150_AUTOSW_MSK));
131 printk("tvp5150: Color killer threshold control = 0x%02x\n",
132 tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
133 printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
134 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
135 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
136 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
137 printk("tvp5150: Brightness control = 0x%02x\n",
138 tvp5150_read(sd, TVP5150_BRIGHT_CTL));
139 printk("tvp5150: Color saturation control = 0x%02x\n",
140 tvp5150_read(sd, TVP5150_SATURATION_CTL));
141 printk("tvp5150: Hue control = 0x%02x\n",
142 tvp5150_read(sd, TVP5150_HUE_CTL));
143 printk("tvp5150: Contrast control = 0x%02x\n",
144 tvp5150_read(sd, TVP5150_CONTRAST_CTL));
145 printk("tvp5150: Outputs and data rates select = 0x%02x\n",
146 tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
147 printk("tvp5150: Configuration shared pins = 0x%02x\n",
148 tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
149 printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
150 tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
151 tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
152 printk("tvp5150: Active video cropping stop = 0x%02x%02x\n",
153 tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
154 tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
155 printk("tvp5150: Genlock/RTC = 0x%02x\n",
156 tvp5150_read(sd, TVP5150_GENLOCK));
157 printk("tvp5150: Horizontal sync start = 0x%02x\n",
158 tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
159 printk("tvp5150: Vertical blanking start = 0x%02x\n",
160 tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
161 printk("tvp5150: Vertical blanking stop = 0x%02x\n",
162 tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
163 printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
164 tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
165 tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
166 printk("tvp5150: Interrupt reset register B = 0x%02x\n",
167 tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
168 printk("tvp5150: Interrupt enable register B = 0x%02x\n",
169 tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
170 printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
171 tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
172 printk("tvp5150: Video standard = 0x%02x\n",
173 tvp5150_read(sd, TVP5150_VIDEO_STD));
174 printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
175 tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
176 tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
177 printk("tvp5150: Macrovision on counter = 0x%02x\n",
178 tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
179 printk("tvp5150: Macrovision off counter = 0x%02x\n",
180 tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
181 printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
182 (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
183 printk("tvp5150: Device ID = %02x%02x\n",
184 tvp5150_read(sd, TVP5150_MSB_DEV_ID),
185 tvp5150_read(sd, TVP5150_LSB_DEV_ID));
186 printk("tvp5150: ROM version = (hex) %02x.%02x\n",
187 tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
188 tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
189 printk("tvp5150: Vertical line count = 0x%02x%02x\n",
190 tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
191 tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
192 printk("tvp5150: Interrupt status register B = 0x%02x\n",
193 tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
194 printk("tvp5150: Interrupt active register B = 0x%02x\n",
195 tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
196 printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
197 tvp5150_read(sd, TVP5150_STATUS_REG_1),
198 tvp5150_read(sd, TVP5150_STATUS_REG_2),
199 tvp5150_read(sd, TVP5150_STATUS_REG_3),
200 tvp5150_read(sd, TVP5150_STATUS_REG_4),
201 tvp5150_read(sd, TVP5150_STATUS_REG_5));
203 dump_reg_range(sd, "Teletext filter 1", TVP5150_TELETEXT_FIL1_INI,
204 TVP5150_TELETEXT_FIL1_END, 8);
205 dump_reg_range(sd, "Teletext filter 2", TVP5150_TELETEXT_FIL2_INI,
206 TVP5150_TELETEXT_FIL2_END, 8);
208 printk("tvp5150: Teletext filter enable = 0x%02x\n",
209 tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
210 printk("tvp5150: Interrupt status register A = 0x%02x\n",
211 tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
212 printk("tvp5150: Interrupt enable register A = 0x%02x\n",
213 tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
214 printk("tvp5150: Interrupt configuration = 0x%02x\n",
215 tvp5150_read(sd, TVP5150_INT_CONF));
216 printk("tvp5150: VDP status register = 0x%02x\n",
217 tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
218 printk("tvp5150: FIFO word count = 0x%02x\n",
219 tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
220 printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
221 tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
222 printk("tvp5150: FIFO reset = 0x%02x\n",
223 tvp5150_read(sd, TVP5150_FIFO_RESET));
224 printk("tvp5150: Line number interrupt = 0x%02x\n",
225 tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
226 printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
227 tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
228 tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
229 printk("tvp5150: FIFO output control = 0x%02x\n",
230 tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
231 printk("tvp5150: Full field enable = 0x%02x\n",
232 tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
233 printk("tvp5150: Full field mode register = 0x%02x\n",
234 tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
236 dump_reg_range(sd, "CC data", TVP5150_CC_DATA_INI,
237 TVP5150_CC_DATA_END, 8);
239 dump_reg_range(sd, "WSS data", TVP5150_WSS_DATA_INI,
240 TVP5150_WSS_DATA_END, 8);
242 dump_reg_range(sd, "VPS data", TVP5150_VPS_DATA_INI,
243 TVP5150_VPS_DATA_END, 8);
245 dump_reg_range(sd, "VITC data", TVP5150_VITC_DATA_INI,
246 TVP5150_VITC_DATA_END, 10);
248 dump_reg_range(sd, "Line mode", TVP5150_LINE_MODE_INI,
249 TVP5150_LINE_MODE_END, 8);
253 /****************************************************************************
255 ****************************************************************************/
257 static inline void tvp5150_selmux(struct v4l2_subdev *sd)
260 struct tvp5150 *decoder = to_tvp5150(sd);
264 /* Only tvp5150am1 and tvp5151 have signal generator support */
265 if ((decoder->dev_id == 0x5150 && decoder->rom_ver == 0x0400) ||
266 (decoder->dev_id == 0x5151 && decoder->rom_ver == 0x0100)) {
267 if (!decoder->enable)
271 switch (decoder->input) {
272 case TVP5150_COMPOSITE1:
275 case TVP5150_COMPOSITE0:
283 v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
284 "=> tvp5150 input=%i, opmode=%i\n",
285 decoder->input, decoder->output,
288 tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
289 tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
292 * Setup the FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK output signals. For
293 * S-Video we output the vertical lock (VLK) signal on FID/GLCO/VLK/HVLK
294 * and set INTREQ/GPCL/VBLK to logic 0. For composite we output the
295 * field indicator (FID) signal on FID/GLCO/VLK/HVLK and set
296 * INTREQ/GPCL/VBLK to logic 1.
298 val = tvp5150_read(sd, TVP5150_MISC_CTL);
300 v4l2_err(sd, "%s: failed with error = %d\n", __func__, val);
304 if (decoder->input == TVP5150_SVIDEO)
305 val = (val & ~TVP5150_MISC_CTL_GPCL) | TVP5150_MISC_CTL_HVLK;
307 val = (val & ~TVP5150_MISC_CTL_HVLK) | TVP5150_MISC_CTL_GPCL;
308 tvp5150_write(sd, TVP5150_MISC_CTL, val);
311 struct i2c_reg_value {
316 /* Default values as sugested at TVP5150AM1 datasheet */
317 static const struct i2c_reg_value tvp5150_init_default[] = {
319 TVP5150_VD_IN_SRC_SEL_1,0x00
322 TVP5150_ANAL_CHL_CTL,0x15
325 TVP5150_OP_MODE_CTL,0x00
328 TVP5150_MISC_CTL,0x01
331 TVP5150_COLOR_KIL_THSH_CTL,0x10
334 TVP5150_LUMA_PROC_CTL_1,0x60
337 TVP5150_LUMA_PROC_CTL_2,0x00
340 TVP5150_BRIGHT_CTL,0x80
343 TVP5150_SATURATION_CTL,0x80
349 TVP5150_CONTRAST_CTL,0x80
352 TVP5150_DATA_RATE_SEL,0x47
355 TVP5150_LUMA_PROC_CTL_3,0x00
358 TVP5150_CONF_SHARED_PIN,0x08
361 TVP5150_ACT_VD_CROP_ST_MSB,0x00
364 TVP5150_ACT_VD_CROP_ST_LSB,0x00
367 TVP5150_ACT_VD_CROP_STP_MSB,0x00
370 TVP5150_ACT_VD_CROP_STP_LSB,0x00
376 TVP5150_HORIZ_SYNC_START,0x80
379 TVP5150_VERT_BLANKING_START,0x00
382 TVP5150_VERT_BLANKING_STOP,0x00
385 TVP5150_CHROMA_PROC_CTL_1,0x0c
388 TVP5150_CHROMA_PROC_CTL_2,0x14
391 TVP5150_INT_RESET_REG_B,0x00
394 TVP5150_INT_ENABLE_REG_B,0x00
397 TVP5150_INTT_CONFIG_REG_B,0x00
400 TVP5150_VIDEO_STD,0x00
403 TVP5150_MACROVISION_ON_CTR,0x0f
406 TVP5150_MACROVISION_OFF_CTR,0x01
409 TVP5150_TELETEXT_FIL_ENA,0x00
412 TVP5150_INT_STATUS_REG_A,0x00
415 TVP5150_INT_ENABLE_REG_A,0x00
418 TVP5150_INT_CONF,0x04
421 TVP5150_FIFO_INT_THRESHOLD,0x80
424 TVP5150_FIFO_RESET,0x00
427 TVP5150_LINE_NUMBER_INT,0x00
430 TVP5150_PIX_ALIGN_REG_LOW,0x4e
433 TVP5150_PIX_ALIGN_REG_HIGH,0x00
436 TVP5150_FIFO_OUT_CTRL,0x01
439 TVP5150_FULL_FIELD_ENA,0x00
442 TVP5150_LINE_MODE_INI,0x00
445 TVP5150_FULL_FIELD_MODE_REG,0x7f
452 /* Default values as sugested at TVP5150AM1 datasheet */
453 static const struct i2c_reg_value tvp5150_init_enable[] = {
455 TVP5150_CONF_SHARED_PIN, 2
456 },{ /* Automatic offset and AGC enabled */
457 TVP5150_ANAL_CHL_CTL, 0x15
458 },{ /* Activate YCrCb output 0x9 or 0xd ? */
459 TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL |
460 TVP5150_MISC_CTL_INTREQ_OE |
461 TVP5150_MISC_CTL_YCBCR_OE |
462 TVP5150_MISC_CTL_SYNC_OE |
463 TVP5150_MISC_CTL_VBLANK |
464 TVP5150_MISC_CTL_CLOCK_OE,
465 },{ /* Activates video std autodetection for all standards */
466 TVP5150_AUTOSW_MSK, 0x0
467 },{ /* Default format: 0x47. For 4:2:2: 0x40 */
468 TVP5150_DATA_RATE_SEL, 0x47
470 TVP5150_CHROMA_PROC_CTL_1, 0x0c
472 TVP5150_CHROMA_PROC_CTL_2, 0x54
473 },{ /* Non documented, but initialized on WinTV USB2 */
480 struct tvp5150_vbi_type {
481 unsigned int vbi_type;
482 unsigned int ini_line;
483 unsigned int end_line;
484 unsigned int by_field :1;
487 struct i2c_vbi_ram_value {
489 struct tvp5150_vbi_type type;
490 unsigned char values[16];
493 /* This struct have the values for each supported VBI Standard
495 tvp5150_vbi_types should follow the same order as vbi_ram_default
496 * value 0 means rom position 0x10, value 1 means rom position 0x30
497 * and so on. There are 16 possible locations from 0 to 15.
500 static struct i2c_vbi_ram_value vbi_ram_default[] =
502 /* FIXME: Current api doesn't handle all VBI types, those not
503 yet supported are placed under #if 0 */
505 {0x010, /* Teletext, SECAM, WST System A */
506 {V4L2_SLICED_TELETEXT_SECAM,6,23,1},
507 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
508 0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
511 {0x030, /* Teletext, PAL, WST System B */
512 {V4L2_SLICED_TELETEXT_B,6,22,1},
513 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
514 0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
517 {0x050, /* Teletext, PAL, WST System C */
518 {V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
519 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
520 0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
522 {0x070, /* Teletext, NTSC, WST System B */
523 {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
524 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
525 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
527 {0x090, /* Tetetext, NTSC NABTS System C */
528 {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
529 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
530 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
532 {0x0b0, /* Teletext, NTSC-J, NABTS System D */
533 {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
534 { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
535 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
537 {0x0d0, /* Closed Caption, PAL/SECAM */
538 {V4L2_SLICED_CAPTION_625,22,22,1},
539 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
540 0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
543 {0x0f0, /* Closed Caption, NTSC */
544 {V4L2_SLICED_CAPTION_525,21,21,1},
545 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
546 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
548 {0x110, /* Wide Screen Signal, PAL/SECAM */
549 {V4L2_SLICED_WSS_625,23,23,1},
550 { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
551 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
554 {0x130, /* Wide Screen Signal, NTSC C */
555 {V4L2_SLICED_WSS_525,20,20,1},
556 { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
557 0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
559 {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
560 {V4l2_SLICED_VITC_625,6,22,0},
561 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
562 0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
564 {0x170, /* Vertical Interval Timecode (VITC), NTSC */
565 {V4l2_SLICED_VITC_525,10,20,0},
566 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
567 0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
570 {0x190, /* Video Program System (VPS), PAL */
571 {V4L2_SLICED_VPS,16,16,0},
572 { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
573 0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
575 /* 0x1d0 User programmable */
581 static int tvp5150_write_inittab(struct v4l2_subdev *sd,
582 const struct i2c_reg_value *regs)
584 while (regs->reg != 0xff) {
585 tvp5150_write(sd, regs->reg, regs->value);
591 static int tvp5150_vdp_init(struct v4l2_subdev *sd,
592 const struct i2c_vbi_ram_value *regs)
596 /* Disable Full Field */
597 tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
599 /* Before programming, Line mode should be at 0xff */
600 for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
601 tvp5150_write(sd, i, 0xff);
604 while (regs->reg != (u16)-1) {
605 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
606 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
608 for (i = 0; i < 16; i++)
609 tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
616 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
617 static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
618 struct v4l2_sliced_vbi_cap *cap)
620 const struct i2c_vbi_ram_value *regs = vbi_ram_default;
623 v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n");
624 memset(cap, 0, sizeof *cap);
626 while (regs->reg != (u16)-1 ) {
627 for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
628 cap->service_lines[0][line] |= regs->type.vbi_type;
630 cap->service_set |= regs->type.vbi_type;
637 /* Set vbi processing
638 * type - one of tvp5150_vbi_types
639 * line - line to gather data
640 * fields: bit 0 field1, bit 1, field2
641 * flags (default=0xf0) is a bitmask, were set means:
642 * bit 7: enable filtering null bytes on CC
643 * bit 6: send data also to FIFO
644 * bit 5: don't allow data with errors on FIFO
645 * bit 4: enable ECC when possible
646 * pix_align = pix alignment:
650 static int tvp5150_set_vbi(struct v4l2_subdev *sd,
651 const struct i2c_vbi_ram_value *regs,
652 unsigned int type,u8 flags, int line,
655 struct tvp5150 *decoder = to_tvp5150(sd);
656 v4l2_std_id std = decoder->norm;
660 if (std == V4L2_STD_ALL) {
661 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
663 } else if (std & V4L2_STD_625_50) {
664 /* Don't follow NTSC Line number convension */
671 while (regs->reg != (u16)-1 ) {
672 if ((type & regs->type.vbi_type) &&
673 (line>=regs->type.ini_line) &&
674 (line<=regs->type.end_line)) {
675 type=regs->type.vbi_type;
682 if (regs->reg == (u16)-1)
685 type=pos | (flags & 0xf0);
686 reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
689 tvp5150_write(sd, reg, type);
693 tvp5150_write(sd, reg+1, type);
699 static int tvp5150_get_vbi(struct v4l2_subdev *sd,
700 const struct i2c_vbi_ram_value *regs, int line)
702 struct tvp5150 *decoder = to_tvp5150(sd);
703 v4l2_std_id std = decoder->norm;
708 if (std == V4L2_STD_ALL) {
709 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
711 } else if (std & V4L2_STD_625_50) {
712 /* Don't follow NTSC Line number convension */
716 if (line < 6 || line > 27)
719 reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
721 for (i = 0; i <= 1; i++) {
722 ret = tvp5150_read(sd, reg + i);
724 v4l2_err(sd, "%s: failed with error = %d\n",
730 type |= regs[pos].type.vbi_type;
736 static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
738 struct tvp5150 *decoder = to_tvp5150(sd);
743 /* First tests should be against specific std */
745 if (std == V4L2_STD_NTSC_443) {
746 fmt = VIDEO_STD_NTSC_4_43_BIT;
747 } else if (std == V4L2_STD_PAL_M) {
748 fmt = VIDEO_STD_PAL_M_BIT;
749 } else if (std == V4L2_STD_PAL_N || std == V4L2_STD_PAL_Nc) {
750 fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
752 /* Then, test against generic ones */
753 if (std & V4L2_STD_NTSC)
754 fmt = VIDEO_STD_NTSC_MJ_BIT;
755 else if (std & V4L2_STD_PAL)
756 fmt = VIDEO_STD_PAL_BDGHIN_BIT;
757 else if (std & V4L2_STD_SECAM)
758 fmt = VIDEO_STD_SECAM_BIT;
761 v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
762 tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
766 static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
768 struct tvp5150 *decoder = to_tvp5150(sd);
770 if (decoder->norm == std)
773 /* Change cropping height limits */
774 if (std & V4L2_STD_525_60)
775 decoder->rect.height = TVP5150_V_MAX_525_60;
777 decoder->rect.height = TVP5150_V_MAX_OTHERS;
780 return tvp5150_set_std(sd, std);
783 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
785 struct tvp5150 *decoder = to_tvp5150(sd);
787 /* Initializes TVP5150 to its default values */
788 tvp5150_write_inittab(sd, tvp5150_init_default);
790 /* Initializes VDP registers */
791 tvp5150_vdp_init(sd, vbi_ram_default);
793 /* Selects decoder input */
796 /* Initializes TVP5150 to stream enabled values */
797 tvp5150_write_inittab(sd, tvp5150_init_enable);
799 /* Initialize image preferences */
800 v4l2_ctrl_handler_setup(&decoder->hdl);
802 tvp5150_set_std(sd, decoder->norm);
804 if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
805 tvp5150_write(sd, TVP5150_DATA_RATE_SEL, 0x40);
810 static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
812 struct v4l2_subdev *sd = to_sd(ctrl);
813 struct tvp5150 *decoder = to_tvp5150(sd);
816 case V4L2_CID_BRIGHTNESS:
817 tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
819 case V4L2_CID_CONTRAST:
820 tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
822 case V4L2_CID_SATURATION:
823 tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
826 tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
828 case V4L2_CID_TEST_PATTERN:
829 decoder->enable = ctrl->val ? false : true;
836 static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
838 int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
840 switch (val & 0x0F) {
842 return V4L2_STD_NTSC;
846 return V4L2_STD_PAL_M;
848 return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
850 return V4L2_STD_NTSC_443;
852 return V4L2_STD_SECAM;
854 return V4L2_STD_UNKNOWN;
858 static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
859 struct v4l2_subdev_pad_config *cfg,
860 struct v4l2_subdev_format *format)
862 struct v4l2_mbus_framefmt *f;
863 struct tvp5150 *decoder = to_tvp5150(sd);
865 if (!format || format->pad)
870 f->width = decoder->rect.width;
871 f->height = decoder->rect.height / 2;
873 f->code = MEDIA_BUS_FMT_UYVY8_2X8;
874 f->field = V4L2_FIELD_ALTERNATE;
875 f->colorspace = V4L2_COLORSPACE_SMPTE170M;
877 v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width,
882 static int tvp5150_set_selection(struct v4l2_subdev *sd,
883 struct v4l2_subdev_pad_config *cfg,
884 struct v4l2_subdev_selection *sel)
886 struct tvp5150 *decoder = to_tvp5150(sd);
887 struct v4l2_rect rect = sel->r;
891 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
892 sel->target != V4L2_SEL_TGT_CROP)
895 v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n",
896 __func__, rect.left, rect.top, rect.width, rect.height);
898 /* tvp5150 has some special limits */
899 rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
900 rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
902 /* Calculate height based on current standard */
903 if (decoder->norm == V4L2_STD_ALL)
904 std = tvp5150_read_std(sd);
908 if (std & V4L2_STD_525_60)
909 hmax = TVP5150_V_MAX_525_60;
911 hmax = TVP5150_V_MAX_OTHERS;
915 * - width = 2 due to UYVY colorspace
916 * - height, image = no special alignment
918 v4l_bound_align_image(&rect.width,
919 TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
920 TVP5150_H_MAX - rect.left, 1, &rect.height,
921 hmax - TVP5150_MAX_CROP_TOP - rect.top,
922 hmax - rect.top, 0, 0);
924 tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
925 tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
926 rect.top + rect.height - hmax);
927 tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB,
928 rect.left >> TVP5150_CROP_SHIFT);
929 tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB,
930 rect.left | (1 << TVP5150_CROP_SHIFT));
931 tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB,
932 (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
934 tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB,
935 rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
937 decoder->rect = rect;
942 static int tvp5150_get_selection(struct v4l2_subdev *sd,
943 struct v4l2_subdev_pad_config *cfg,
944 struct v4l2_subdev_selection *sel)
946 struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
949 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
952 switch (sel->target) {
953 case V4L2_SEL_TGT_CROP_BOUNDS:
954 case V4L2_SEL_TGT_CROP_DEFAULT:
957 sel->r.width = TVP5150_H_MAX;
959 /* Calculate height based on current standard */
960 if (decoder->norm == V4L2_STD_ALL)
961 std = tvp5150_read_std(sd);
964 if (std & V4L2_STD_525_60)
965 sel->r.height = TVP5150_V_MAX_525_60;
967 sel->r.height = TVP5150_V_MAX_OTHERS;
969 case V4L2_SEL_TGT_CROP:
970 sel->r = decoder->rect;
977 static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,
978 struct v4l2_mbus_config *cfg)
980 struct tvp5150 *decoder = to_tvp5150(sd);
982 cfg->type = decoder->mbus_type;
983 cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING
984 | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH;
989 /****************************************************************************
991 ****************************************************************************/
992 static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd,
993 struct v4l2_subdev_pad_config *cfg,
994 struct v4l2_subdev_mbus_code_enum *code)
996 if (code->pad || code->index)
999 code->code = MEDIA_BUS_FMT_UYVY8_2X8;
1003 static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
1004 struct v4l2_subdev_pad_config *cfg,
1005 struct v4l2_subdev_frame_size_enum *fse)
1007 struct tvp5150 *decoder = to_tvp5150(sd);
1009 if (fse->index >= 8 || fse->code != MEDIA_BUS_FMT_UYVY8_2X8)
1012 fse->code = MEDIA_BUS_FMT_UYVY8_2X8;
1013 fse->min_width = decoder->rect.width;
1014 fse->max_width = decoder->rect.width;
1015 fse->min_height = decoder->rect.height / 2;
1016 fse->max_height = decoder->rect.height / 2;
1021 /****************************************************************************
1023 ****************************************************************************/
1025 static int tvp5150_link_setup(struct media_entity *entity,
1026 const struct media_pad *local,
1027 const struct media_pad *remote, u32 flags)
1029 #ifdef CONFIG_MEDIA_CONTROLLER
1030 struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
1031 struct tvp5150 *decoder = to_tvp5150(sd);
1034 for (i = 0; i < TVP5150_INPUT_NUM; i++) {
1035 if (remote->entity == &decoder->input_ent[i])
1039 /* Do nothing for entities that are not input connectors */
1040 if (i == TVP5150_INPUT_NUM)
1051 static const struct media_entity_operations tvp5150_sd_media_ops = {
1052 .link_setup = tvp5150_link_setup,
1055 /****************************************************************************
1057 ****************************************************************************/
1059 static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
1061 struct tvp5150 *decoder = to_tvp5150(sd);
1064 /* Enable or disable the video output signals. */
1065 val = tvp5150_read(sd, TVP5150_MISC_CTL);
1069 val &= ~(TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
1070 TVP5150_MISC_CTL_CLOCK_OE);
1074 * Enable the YCbCr and clock outputs. In discrete sync mode
1075 * (non-BT.656) additionally enable the the sync outputs.
1077 val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
1078 if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
1079 val |= TVP5150_MISC_CTL_SYNC_OE;
1082 tvp5150_write(sd, TVP5150_MISC_CTL, val);
1087 static int tvp5150_s_routing(struct v4l2_subdev *sd,
1088 u32 input, u32 output, u32 config)
1090 struct tvp5150 *decoder = to_tvp5150(sd);
1092 decoder->input = input;
1093 decoder->output = output;
1095 if (output == TVP5150_BLACK_SCREEN)
1096 decoder->enable = false;
1098 decoder->enable = true;
1104 static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
1106 /* this is for capturing 36 raw vbi lines
1107 if there's a way to cut off the beginning 2 vbi lines
1108 with the tvp5150 then the vbi line count could be lowered
1109 to 17 lines/field again, although I couldn't find a register
1110 which could do that cropping */
1111 if (fmt->sample_format == V4L2_PIX_FMT_GREY)
1112 tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
1113 if (fmt->count[0] == 18 && fmt->count[1] == 18) {
1114 tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
1115 tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
1120 static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1124 if (svbi->service_set != 0) {
1125 for (i = 0; i <= 23; i++) {
1126 svbi->service_lines[1][i] = 0;
1127 svbi->service_lines[0][i] =
1128 tvp5150_set_vbi(sd, vbi_ram_default,
1129 svbi->service_lines[0][i], 0xf0, i, 3);
1132 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
1135 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
1137 /* Disable Full Field */
1138 tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
1140 /* Disable Line modes */
1141 for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
1142 tvp5150_write(sd, i, 0xff);
1147 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1151 memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
1153 for (i = 0; i <= 23; i++) {
1154 svbi->service_lines[0][i] =
1155 tvp5150_get_vbi(sd, vbi_ram_default, i);
1156 mask |= svbi->service_lines[0][i];
1158 svbi->service_set = mask;
1162 #ifdef CONFIG_VIDEO_ADV_DEBUG
1163 static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1167 res = tvp5150_read(sd, reg->reg & 0xff);
1169 v4l2_err(sd, "%s: failed with error = %d\n", __func__, res);
1178 static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
1180 return tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
1184 static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
1186 int status = tvp5150_read(sd, 0x88);
1188 vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
1192 static int tvp5150_registered(struct v4l2_subdev *sd)
1194 #ifdef CONFIG_MEDIA_CONTROLLER
1195 struct tvp5150 *decoder = to_tvp5150(sd);
1199 for (i = 0; i < TVP5150_INPUT_NUM; i++) {
1200 struct media_entity *input = &decoder->input_ent[i];
1201 struct media_pad *pad = &decoder->input_pad[i];
1206 decoder->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
1208 ret = media_entity_pads_init(input, 1, pad);
1212 ret = media_device_register_entity(sd->v4l2_dev->mdev, input);
1216 ret = media_create_pad_link(input, 0, &sd->entity,
1217 DEMOD_PAD_IF_INPUT, 0);
1219 media_device_unregister_entity(input);
1228 /* ----------------------------------------------------------------------- */
1230 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
1231 .s_ctrl = tvp5150_s_ctrl,
1234 static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
1235 .log_status = tvp5150_log_status,
1236 .reset = tvp5150_reset,
1237 #ifdef CONFIG_VIDEO_ADV_DEBUG
1238 .g_register = tvp5150_g_register,
1239 .s_register = tvp5150_s_register,
1243 static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
1244 .g_tuner = tvp5150_g_tuner,
1247 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
1248 .s_std = tvp5150_s_std,
1249 .s_stream = tvp5150_s_stream,
1250 .s_routing = tvp5150_s_routing,
1251 .g_mbus_config = tvp5150_g_mbus_config,
1254 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
1255 .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
1256 .g_sliced_fmt = tvp5150_g_sliced_fmt,
1257 .s_sliced_fmt = tvp5150_s_sliced_fmt,
1258 .s_raw_fmt = tvp5150_s_raw_fmt,
1261 static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = {
1262 .enum_mbus_code = tvp5150_enum_mbus_code,
1263 .enum_frame_size = tvp5150_enum_frame_size,
1264 .set_fmt = tvp5150_fill_fmt,
1265 .get_fmt = tvp5150_fill_fmt,
1266 .get_selection = tvp5150_get_selection,
1267 .set_selection = tvp5150_set_selection,
1270 static const struct v4l2_subdev_ops tvp5150_ops = {
1271 .core = &tvp5150_core_ops,
1272 .tuner = &tvp5150_tuner_ops,
1273 .video = &tvp5150_video_ops,
1274 .vbi = &tvp5150_vbi_ops,
1275 .pad = &tvp5150_pad_ops,
1278 static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
1279 .registered = tvp5150_registered,
1283 /****************************************************************************
1285 ****************************************************************************/
1287 static int tvp5150_detect_version(struct tvp5150 *core)
1289 struct v4l2_subdev *sd = &core->sd;
1290 struct i2c_client *c = v4l2_get_subdevdata(sd);
1296 * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
1297 * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER
1299 for (i = 0; i < 4; i++) {
1300 res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i);
1306 core->dev_id = (regs[0] << 8) | regs[1];
1307 core->rom_ver = (regs[2] << 8) | regs[3];
1309 v4l2_info(sd, "tvp%04x (%u.%u) chip found @ 0x%02x (%s)\n",
1310 core->dev_id, regs[2], regs[3], c->addr << 1,
1313 if (core->dev_id == 0x5150 && core->rom_ver == 0x0321) {
1314 v4l2_info(sd, "tvp5150a detected.\n");
1315 } else if (core->dev_id == 0x5150 && core->rom_ver == 0x0400) {
1316 v4l2_info(sd, "tvp5150am1 detected.\n");
1318 /* ITU-T BT.656.4 timing */
1319 tvp5150_write(sd, TVP5150_REV_SELECT, 0);
1320 } else if (core->dev_id == 0x5151 && core->rom_ver == 0x0100) {
1321 v4l2_info(sd, "tvp5151 detected.\n");
1323 v4l2_info(sd, "*** unknown tvp%04x chip detected.\n",
1330 static int tvp5150_init(struct i2c_client *c)
1332 struct gpio_desc *pdn_gpio;
1333 struct gpio_desc *reset_gpio;
1335 pdn_gpio = devm_gpiod_get_optional(&c->dev, "pdn", GPIOD_OUT_HIGH);
1336 if (IS_ERR(pdn_gpio))
1337 return PTR_ERR(pdn_gpio);
1340 gpiod_set_value_cansleep(pdn_gpio, 0);
1341 /* Delay time between power supplies active and reset */
1345 reset_gpio = devm_gpiod_get_optional(&c->dev, "reset", GPIOD_OUT_HIGH);
1346 if (IS_ERR(reset_gpio))
1347 return PTR_ERR(reset_gpio);
1350 /* RESETB pulse duration */
1352 gpiod_set_value_cansleep(reset_gpio, 0);
1353 /* Delay time between end of reset to I2C active */
1354 usleep_range(200, 250);
1360 static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
1362 struct v4l2_of_endpoint bus_cfg;
1363 struct device_node *ep;
1364 #ifdef CONFIG_MEDIA_CONTROLLER
1365 struct device_node *connectors, *child;
1366 struct media_entity *input;
1373 ep = of_graph_get_next_endpoint(np, NULL);
1377 ret = v4l2_of_parse_endpoint(ep, &bus_cfg);
1381 flags = bus_cfg.bus.parallel.flags;
1383 if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
1384 !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
1385 flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
1386 flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
1391 decoder->mbus_type = bus_cfg.bus_type;
1393 #ifdef CONFIG_MEDIA_CONTROLLER
1394 connectors = of_get_child_by_name(np, "connectors");
1399 for_each_available_child_of_node(connectors, child) {
1400 ret = of_property_read_u32(child, "input", &input_type);
1402 v4l2_err(&decoder->sd,
1403 "missing type property in node %s\n",
1408 if (input_type >= TVP5150_INPUT_NUM) {
1413 input = &decoder->input_ent[input_type];
1415 /* Each input connector can only be defined once */
1417 v4l2_err(&decoder->sd,
1418 "input %s with same type already exists\n",
1424 switch (input_type) {
1425 case TVP5150_COMPOSITE0:
1426 case TVP5150_COMPOSITE1:
1427 input->function = MEDIA_ENT_F_CONN_COMPOSITE;
1429 case TVP5150_SVIDEO:
1430 input->function = MEDIA_ENT_F_CONN_SVIDEO;
1434 input->flags = MEDIA_ENT_FL_CONNECTOR;
1436 ret = of_property_read_string(child, "label", &name);
1438 v4l2_err(&decoder->sd,
1439 "missing label property in node %s\n",
1448 of_node_put(connectors);
1455 static const char * const tvp5150_test_patterns[2] = {
1460 static int tvp5150_probe(struct i2c_client *c,
1461 const struct i2c_device_id *id)
1463 struct tvp5150 *core;
1464 struct v4l2_subdev *sd;
1465 struct device_node *np = c->dev.of_node;
1468 /* Check if the adapter supports the needed features */
1469 if (!i2c_check_functionality(c->adapter,
1470 I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
1473 res = tvp5150_init(c);
1477 core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);
1483 if (IS_ENABLED(CONFIG_OF) && np) {
1484 res = tvp5150_parse_dt(core, np);
1486 v4l2_err(sd, "DT parsing error: %d\n", res);
1490 /* Default to BT.656 embedded sync */
1491 core->mbus_type = V4L2_MBUS_BT656;
1494 v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
1495 sd->internal_ops = &tvp5150_internal_ops;
1496 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1498 #if defined(CONFIG_MEDIA_CONTROLLER)
1499 core->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
1500 core->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
1501 core->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
1503 sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
1505 res = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, core->pads);
1509 sd->entity.ops = &tvp5150_sd_media_ops;
1512 res = tvp5150_detect_version(core);
1516 core->norm = V4L2_STD_ALL; /* Default is autodetect */
1517 core->input = TVP5150_COMPOSITE1;
1518 core->enable = true;
1520 v4l2_ctrl_handler_init(&core->hdl, 5);
1521 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1522 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1523 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1524 V4L2_CID_CONTRAST, 0, 255, 1, 128);
1525 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1526 V4L2_CID_SATURATION, 0, 255, 1, 128);
1527 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1528 V4L2_CID_HUE, -128, 127, 1, 0);
1529 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1530 V4L2_CID_PIXEL_RATE, 27000000,
1531 27000000, 1, 27000000);
1532 v4l2_ctrl_new_std_menu_items(&core->hdl, &tvp5150_ctrl_ops,
1533 V4L2_CID_TEST_PATTERN,
1534 ARRAY_SIZE(tvp5150_test_patterns) - 1,
1535 0, 0, tvp5150_test_patterns);
1536 sd->ctrl_handler = &core->hdl;
1537 if (core->hdl.error) {
1538 res = core->hdl.error;
1542 /* Default is no cropping */
1544 if (tvp5150_read_std(sd) & V4L2_STD_525_60)
1545 core->rect.height = TVP5150_V_MAX_525_60;
1547 core->rect.height = TVP5150_V_MAX_OTHERS;
1548 core->rect.left = 0;
1549 core->rect.width = TVP5150_H_MAX;
1551 tvp5150_reset(sd, 0); /* Calls v4l2_ctrl_handler_setup() */
1553 res = v4l2_async_register_subdev(sd);
1558 tvp5150_log_status(sd);
1562 v4l2_ctrl_handler_free(&core->hdl);
1566 static int tvp5150_remove(struct i2c_client *c)
1568 struct v4l2_subdev *sd = i2c_get_clientdata(c);
1569 struct tvp5150 *decoder = to_tvp5150(sd);
1571 v4l2_dbg(1, debug, sd,
1572 "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1575 v4l2_async_unregister_subdev(sd);
1576 v4l2_ctrl_handler_free(&decoder->hdl);
1580 /* ----------------------------------------------------------------------- */
1582 static const struct i2c_device_id tvp5150_id[] = {
1586 MODULE_DEVICE_TABLE(i2c, tvp5150_id);
1588 #if IS_ENABLED(CONFIG_OF)
1589 static const struct of_device_id tvp5150_of_match[] = {
1590 { .compatible = "ti,tvp5150", },
1593 MODULE_DEVICE_TABLE(of, tvp5150_of_match);
1596 static struct i2c_driver tvp5150_driver = {
1598 .of_match_table = of_match_ptr(tvp5150_of_match),
1601 .probe = tvp5150_probe,
1602 .remove = tvp5150_remove,
1603 .id_table = tvp5150_id,
1606 module_i2c_driver(tvp5150_driver);