drivers/media/i2c/s5k4ecgx.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Driver for Samsung S5K4ECGX 1/4" 5Mp CMOS Image Sensor SoC
   4  * with an Embedded Image Signal Processor.
   5  *
   6  * Copyright (C) 2012, Linaro, Sangwook Lee <sangwook.lee@linaro.org>
   7  * Copyright (C) 2012, Insignal Co,. Ltd, Homin Lee <suapapa@insignal.co.kr>
   8  *
   9  * Based on s5k6aa and noon010pc30 driver
  10  * Copyright (C) 2011, Samsung Electronics Co., Ltd.
  11  */
  12
  13 #include <linux/clk.h>
  14 #include <linux/crc32.h>
  15 #include <linux/ctype.h>
  16 #include <linux/delay.h>
  17 #include <linux/firmware.h>
  18 #include <linux/gpio.h>
  19 #include <linux/i2c.h>
  20 #include <linux/module.h>
  21 #include <linux/regulator/consumer.h>
  22 #include <linux/slab.h>
  23 #include <asm/unaligned.h>
  24
  25 #include <media/media-entity.h>
  26 #include <media/i2c/s5k4ecgx.h>
  27 #include <media/v4l2-ctrls.h>
  28 #include <media/v4l2-device.h>
  29 #include <media/v4l2-mediabus.h>
  30 #include <media/v4l2-subdev.h>
  31
  32 static int debug;
  33 module_param(debug, int, 0644);
  34
  35 #define S5K4ECGX_DRIVER_NAME            "s5k4ecgx"
  36 #define S5K4ECGX_FIRMWARE               "/*(DEBLOBBED)*/"
  37
  38 /* Firmware revision information */
  39 #define REG_FW_REVISION                 0x700001a6
  40 #define REG_FW_VERSION                  0x700001a4
  41 #define S5K4ECGX_REVISION_1_1           0x11
  42 #define S5K4ECGX_FW_VERSION             0x4ec0
  43
  44 /* General purpose parameters */
  45 #define REG_USER_BRIGHTNESS             0x7000022c
  46 #define REG_USER_CONTRAST               0x7000022e
  47 #define REG_USER_SATURATION             0x70000230
  48
  49 #define REG_G_ENABLE_PREV               0x7000023e
  50 #define REG_G_ENABLE_PREV_CHG           0x70000240
  51 #define REG_G_NEW_CFG_SYNC              0x7000024a
  52 #define REG_G_PREV_IN_WIDTH             0x70000250
  53 #define REG_G_PREV_IN_HEIGHT            0x70000252
  54 #define REG_G_PREV_IN_XOFFS             0x70000254
  55 #define REG_G_PREV_IN_YOFFS             0x70000256
  56 #define REG_G_CAP_IN_WIDTH              0x70000258
  57 #define REG_G_CAP_IN_HEIGHT             0x7000025a
  58 #define REG_G_CAP_IN_XOFFS              0x7000025c
  59 #define REG_G_CAP_IN_YOFFS              0x7000025e
  60 #define REG_G_INPUTS_CHANGE_REQ         0x70000262
  61 #define REG_G_ACTIVE_PREV_CFG           0x70000266
  62 #define REG_G_PREV_CFG_CHG              0x70000268
  63 #define REG_G_PREV_OPEN_AFTER_CH        0x7000026a
  64
  65 /* Preview context register sets. n = 0...4. */
  66 #define PREG(n, x)                      ((n) * 0x30 + (x))
  67 #define REG_P_OUT_WIDTH(n)              PREG(n, 0x700002a6)
  68 #define REG_P_OUT_HEIGHT(n)             PREG(n, 0x700002a8)
  69 #define REG_P_FMT(n)                    PREG(n, 0x700002aa)
  70 #define REG_P_PVI_MASK(n)               PREG(n, 0x700002b4)
  71 #define REG_P_FR_TIME_TYPE(n)           PREG(n, 0x700002be)
  72 #define  FR_TIME_DYNAMIC                0
  73 #define  FR_TIME_FIXED                  1
  74 #define  FR_TIME_FIXED_ACCURATE         2
  75 #define REG_P_FR_TIME_Q_TYPE(n)         PREG(n, 0x700002c0)
  76 #define  FR_TIME_Q_DYNAMIC              0
  77 #define  FR_TIME_Q_BEST_FRRATE          1
  78 #define  FR_TIME_Q_BEST_QUALITY         2
  79
  80 /* Frame period in 0.1 ms units */
  81 #define REG_P_MAX_FR_TIME(n)            PREG(n, 0x700002c2)
  82 #define REG_P_MIN_FR_TIME(n)            PREG(n, 0x700002c4)
  83 #define  US_TO_FR_TIME(__t)             ((__t) / 100)
  84 #define REG_P_PREV_MIRROR(n)            PREG(n, 0x700002d0)
  85 #define REG_P_CAP_MIRROR(n)             PREG(n, 0x700002d2)
  86
  87 #define REG_G_PREVZOOM_IN_WIDTH         0x70000494
  88 #define REG_G_PREVZOOM_IN_HEIGHT        0x70000496
  89 #define REG_G_PREVZOOM_IN_XOFFS         0x70000498
  90 #define REG_G_PREVZOOM_IN_YOFFS         0x7000049a
  91 #define REG_G_CAPZOOM_IN_WIDTH          0x7000049c
  92 #define REG_G_CAPZOOM_IN_HEIGHT         0x7000049e
  93 #define REG_G_CAPZOOM_IN_XOFFS          0x700004a0
  94 #define REG_G_CAPZOOM_IN_YOFFS          0x700004a2
  95
  96 /* n = 0...4 */
  97 #define REG_USER_SHARPNESS(n)           (0x70000a28 + (n) * 0xb6)
  98
  99 /* Reduce sharpness range for user space API */
 100 #define SHARPNESS_DIV                   8208
 101 #define TOK_TERM                        0xffffffff
 102
 103 /*
 104  * FIXME: This is copied from s5k6aa, because of no information
 105  * in the S5K4ECGX datasheet.
 106  * H/W register Interface (0xd0000000 - 0xd0000fff)
 107  */
 108 #define AHB_MSB_ADDR_PTR                0xfcfc
 109 #define GEN_REG_OFFSH                   0xd000
 110 #define REG_CMDWR_ADDRH                 0x0028
 111 #define REG_CMDWR_ADDRL                 0x002a
 112 #define REG_CMDRD_ADDRH                 0x002c
 113 #define REG_CMDRD_ADDRL                 0x002e
 114 #define REG_CMDBUF0_ADDR                0x0f12
 115
 116 struct s5k4ecgx_frmsize {
 117         struct v4l2_frmsize_discrete size;
 118         /* Fixed sensor matrix crop rectangle */
 119         struct v4l2_rect input_window;
 120 };
 121
 122 struct regval_list {
 123         u32 addr;
 124         u16 val;
 125 };
 126
 127 /*
 128  * TODO: currently only preview is supported and snapshot (capture)
 129  * is not implemented yet
 130  */
 131 static const struct s5k4ecgx_frmsize s5k4ecgx_prev_sizes[] = {
 132         {
 133                 .size = { 176, 144 },
 134                 .input_window = { 0x00, 0x00, 0x928, 0x780 },
 135         }, {
 136                 .size = { 352, 288 },
 137                 .input_window = { 0x00, 0x00, 0x928, 0x780 },
 138         }, {
 139                 .size = { 640, 480 },
 140                 .input_window = { 0x00, 0x00, 0xa00, 0x780 },
 141         }, {
 142                 .size = { 720, 480 },
 143                 .input_window = { 0x00, 0x00, 0xa00, 0x6a8 },
 144         }
 145 };
 146
 147 #define S5K4ECGX_NUM_PREV ARRAY_SIZE(s5k4ecgx_prev_sizes)
 148
 149 struct s5k4ecgx_pixfmt {
 150         u32 code;
 151         u32 colorspace;
 152         /* REG_TC_PCFG_Format register value */
 153         u16 reg_p_format;
 154 };
 155
 156 /* By default value, output from sensor will be YUV422 0-255 */
 157 static const struct s5k4ecgx_pixfmt s5k4ecgx_formats[] = {
 158         { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 },
 159 };
 160
 161 static const char * const s5k4ecgx_supply_names[] = {
 162         /*
 163          * Usually 2.8V is used for analog power (vdda)
 164          * and digital IO (vddio, vdddcore)
 165          */
 166         "vdda",
 167         "vddio",
 168         "vddcore",
 169         "vddreg", /* The internal s5k4ecgx regulator's supply (1.8V) */
 170 };
 171
 172 #define S5K4ECGX_NUM_SUPPLIES ARRAY_SIZE(s5k4ecgx_supply_names)
 173
 174 enum s5k4ecgx_gpio_id {
 175         STBY,
 176         RSET,
 177         GPIO_NUM,
 178 };
 179
 180 struct s5k4ecgx {
 181         struct v4l2_subdev sd;
 182         struct media_pad pad;
 183         struct v4l2_ctrl_handler handler;
 184
 185         struct s5k4ecgx_platform_data *pdata;
 186         const struct s5k4ecgx_pixfmt *curr_pixfmt;
 187         const struct s5k4ecgx_frmsize *curr_frmsize;
 188         struct mutex lock;
 189         u8 streaming;
 190         u8 set_params;
 191
 192         struct regulator_bulk_data supplies[S5K4ECGX_NUM_SUPPLIES];
 193         struct s5k4ecgx_gpio gpio[GPIO_NUM];
 194 };
 195
 196 static inline struct s5k4ecgx *to_s5k4ecgx(struct v4l2_subdev *sd)
 197 {
 198         return container_of(sd, struct s5k4ecgx, sd);
 199 }
 200
 201 static int s5k4ecgx_i2c_read(struct i2c_client *client, u16 addr, u16 *val)
 202 {
 203         u8 wbuf[2] = { addr >> 8, addr & 0xff };
 204         struct i2c_msg msg[2];
 205         u8 rbuf[2];
 206         int ret;
 207
 208         msg[0].addr = client->addr;
 209         msg[0].flags = 0;
 210         msg[0].len = 2;
 211         msg[0].buf = wbuf;
 212
 213         msg[1].addr = client->addr;
 214         msg[1].flags = I2C_M_RD;
 215         msg[1].len = 2;
 216         msg[1].buf = rbuf;
 217
 218         ret = i2c_transfer(client->adapter, msg, 2);
 219         *val = be16_to_cpu(*((__be16 *)rbuf));
 220
 221         v4l2_dbg(4, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val);
 222
 223         return ret == 2 ? 0 : ret;
 224 }
 225
 226 static int s5k4ecgx_i2c_write(struct i2c_client *client, u16 addr, u16 val)
 227 {
 228         u8 buf[4] = { addr >> 8, addr & 0xff, val >> 8, val & 0xff };
 229
 230         int ret = i2c_master_send(client, buf, 4);
 231         v4l2_dbg(4, debug, client, "i2c_write: 0x%04x : 0x%04x\n", addr, val);
 232
 233         return ret == 4 ? 0 : ret;
 234 }
 235
 236 static int s5k4ecgx_write(struct i2c_client *client, u32 addr, u16 val)
 237 {
 238         u16 high = addr >> 16, low = addr & 0xffff;
 239         int ret;
 240
 241         v4l2_dbg(3, debug, client, "write: 0x%08x : 0x%04x\n", addr, val);
 242
 243         ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRH, high);
 244         if (!ret)
 245                 ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRL, low);
 246         if (!ret)
 247                 ret = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val);
 248
 249         return ret;
 250 }
 251
 252 static int s5k4ecgx_read(struct i2c_client *client, u32 addr, u16 *val)
 253 {
 254         u16 high = addr >> 16, low =  addr & 0xffff;
 255         int ret;
 256
 257         ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRH, high);
 258         if (!ret)
 259                 ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRL, low);
 260         if (!ret)
 261                 ret = s5k4ecgx_i2c_read(client, REG_CMDBUF0_ADDR, val);
 262
 263         return ret;
 264 }
 265
 266 static int s5k4ecgx_read_fw_ver(struct v4l2_subdev *sd)
 267 {
 268         struct i2c_client *client = v4l2_get_subdevdata(sd);
 269         u16 hw_rev, fw_ver = 0;
 270         int ret;
 271
 272         ret = s5k4ecgx_read(client, REG_FW_VERSION, &fw_ver);
 273         if (ret < 0 || fw_ver != S5K4ECGX_FW_VERSION) {
 274                 v4l2_err(sd, "FW version check failed!\n");
 275                 return -ENODEV;
 276         }
 277
 278         ret = s5k4ecgx_read(client, REG_FW_REVISION, &hw_rev);
 279         if (ret < 0)
 280                 return ret;
 281
 282         v4l2_info(sd, "chip found FW ver: 0x%x, HW rev: 0x%x\n",
 283                                                 fw_ver, hw_rev);
 284         return 0;
 285 }
 286
 287 static int s5k4ecgx_set_ahb_address(struct v4l2_subdev *sd)
 288 {
 289         struct i2c_client *client = v4l2_get_subdevdata(sd);
 290         int ret;
 291
 292         /* Set APB peripherals start address */
 293         ret = s5k4ecgx_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH);
 294         if (ret < 0)
 295                 return ret;
 296         /*
 297          * FIXME: This is copied from s5k6aa, because of no information
 298          * in s5k4ecgx's datasheet.
 299          * sw_reset is activated to put device into idle status
 300          */
 301         ret = s5k4ecgx_i2c_write(client, 0x0010, 0x0001);
 302         if (ret < 0)
 303                 return ret;
 304
 305         ret = s5k4ecgx_i2c_write(client, 0x1030, 0x0000);
 306         if (ret < 0)
 307                 return ret;
 308         /* Halt ARM CPU */
 309         return s5k4ecgx_i2c_write(client, 0x0014, 0x0001);
 310 }
 311
 312 #define FW_CRC_SIZE     4
 313 /* Register address, value are 4, 2 bytes */
 314 #define FW_RECORD_SIZE  6
 315 /*
 316  * The firmware has following format:
 317  * < total number of records (4 bytes + 2 bytes padding) N >,
 318  * < record 0 >, ..., < record N - 1 >, < CRC32-CCITT (4-bytes) >,
 319  * where "record" is a 4-byte register address followed by 2-byte
 320  * register value (little endian).
 321  * The firmware generator can be found in following git repository:
 322  * git://git.linaro.org/people/sangwook/fimc-v4l2-app.git
 323  */
 324 static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd)
 325 {
 326         struct i2c_client *client = v4l2_get_subdevdata(sd);
 327         const struct firmware *fw;
 328         const u8 *ptr;
 329         int err, i, regs_num;
 330         u32 addr, crc, crc_file, addr_inc = 0;
 331         u16 val;
 332
 333         err = reject_firmware(&fw, S5K4ECGX_FIRMWARE, sd->v4l2_dev->dev);
 334         if (err) {
 335                 v4l2_err(sd, "Failed to read firmware %s\n", S5K4ECGX_FIRMWARE);
 336                 return err;
 337         }
 338         regs_num = get_unaligned_le32(fw->data);
 339
 340         v4l2_dbg(3, debug, sd, "FW: %s size %zu register sets %d\n",
 341                  S5K4ECGX_FIRMWARE, fw->size, regs_num);
 342
 343         regs_num++; /* Add header */
 344         if (fw->size != regs_num * FW_RECORD_SIZE + FW_CRC_SIZE) {
 345                 err = -EINVAL;
 346                 goto fw_out;
 347         }
 348         crc_file = get_unaligned_le32(fw->data + regs_num * FW_RECORD_SIZE);
 349         crc = crc32_le(~0, fw->data, regs_num * FW_RECORD_SIZE);
 350         if (crc != crc_file) {
 351                 v4l2_err(sd, "FW: invalid crc (%#x:%#x)\n", crc, crc_file);
 352                 err = -EINVAL;
 353                 goto fw_out;
 354         }
 355         ptr = fw->data + FW_RECORD_SIZE;
 356         for (i = 1; i < regs_num; i++) {
 357                 addr = get_unaligned_le32(ptr);
 358                 ptr += sizeof(u32);
 359                 val = get_unaligned_le16(ptr);
 360                 ptr += sizeof(u16);
 361                 if (addr - addr_inc != 2)
 362                         err = s5k4ecgx_write(client, addr, val);
 363                 else
 364                         err = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val);
 365                 if (err)
 366                         break;
 367                 addr_inc = addr;
 368         }
 369 fw_out:
 370         release_firmware(fw);
 371         return err;
 372 }
 373
 374 /* Set preview and capture input window */
 375 static int s5k4ecgx_set_input_window(struct i2c_client *c,
 376                                      const struct v4l2_rect *r)
 377 {
 378         int ret;
 379
 380         ret = s5k4ecgx_write(c, REG_G_PREV_IN_WIDTH, r->width);
 381         if (!ret)
 382                 ret = s5k4ecgx_write(c, REG_G_PREV_IN_HEIGHT, r->height);
 383         if (!ret)
 384                 ret = s5k4ecgx_write(c, REG_G_PREV_IN_XOFFS, r->left);
 385         if (!ret)
 386                 ret = s5k4ecgx_write(c, REG_G_PREV_IN_YOFFS, r->top);
 387         if (!ret)
 388                 ret = s5k4ecgx_write(c, REG_G_CAP_IN_WIDTH, r->width);
 389         if (!ret)
 390                 ret = s5k4ecgx_write(c, REG_G_CAP_IN_HEIGHT, r->height);
 391         if (!ret)
 392                 ret = s5k4ecgx_write(c, REG_G_CAP_IN_XOFFS, r->left);
 393         if (!ret)
 394                 ret = s5k4ecgx_write(c, REG_G_CAP_IN_YOFFS, r->top);
 395
 396         return ret;
 397 }
 398
 399 /* Set preview and capture zoom input window */
 400 static int s5k4ecgx_set_zoom_window(struct i2c_client *c,
 401                                     const struct v4l2_rect *r)
 402 {
 403         int ret;
 404
 405         ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width);
 406         if (!ret)
 407                 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height);
 408         if (!ret)
 409                 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left);
 410         if (!ret)
 411                 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top);
 412         if (!ret)
 413                 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_WIDTH, r->width);
 414         if (!ret)
 415                 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_HEIGHT, r->height);
 416         if (!ret)
 417                 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_XOFFS, r->left);
 418         if (!ret)
 419                 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_YOFFS, r->top);
 420
 421         return ret;
 422 }
 423
 424 static int s5k4ecgx_set_output_framefmt(struct s5k4ecgx *priv)
 425 {
 426         struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
 427         int ret;
 428
 429         ret = s5k4ecgx_write(client, REG_P_OUT_WIDTH(0),
 430                              priv->curr_frmsize->size.width);
 431         if (!ret)
 432                 ret = s5k4ecgx_write(client, REG_P_OUT_HEIGHT(0),
 433                                      priv->curr_frmsize->size.height);
 434         if (!ret)
 435                 ret = s5k4ecgx_write(client, REG_P_FMT(0),
 436                                      priv->curr_pixfmt->reg_p_format);
 437         return ret;
 438 }
 439
 440 static int s5k4ecgx_init_sensor(struct v4l2_subdev *sd)
 441 {
 442         int ret;
 443
 444         ret = s5k4ecgx_set_ahb_address(sd);
 445
 446         /* The delay is from manufacturer's settings */
 447         msleep(100);
 448
 449         if (!ret)
 450                 ret = s5k4ecgx_load_firmware(sd);
 451         if (ret)
 452                 v4l2_err(sd, "Failed to write initial settings\n");
 453
 454         return ret;
 455 }
 456
 457 static int s5k4ecgx_gpio_set_value(struct s5k4ecgx *priv, int id, u32 val)
 458 {
 459         if (!gpio_is_valid(priv->gpio[id].gpio))
 460                 return 0;
 461         gpio_set_value(priv->gpio[id].gpio, val);
 462
 463         return 1;
 464 }
 465
 466 static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)
 467 {
 468         int ret;
 469
 470         ret = regulator_bulk_enable(S5K4ECGX_NUM_SUPPLIES, priv->supplies);
 471         if (ret)
 472                 return ret;
 473         usleep_range(30, 50);
 474
 475         /* The polarity of STBY is controlled by TSP */
 476         if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level))
 477                 usleep_range(30, 50);
 478
 479         if (s5k4ecgx_gpio_set_value(priv, RSET, priv->gpio[RSET].level))
 480                 usleep_range(30, 50);
 481
 482         return 0;
 483 }
 484
 485 static int __s5k4ecgx_power_off(struct s5k4ecgx *priv)
 486 {
 487         if (s5k4ecgx_gpio_set_value(priv, RSET, !priv->gpio[RSET].level))
 488                 usleep_range(30, 50);
 489
 490         if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level))
 491                 usleep_range(30, 50);
 492
 493         priv->streaming = 0;
 494
 495         return regulator_bulk_disable(S5K4ECGX_NUM_SUPPLIES, priv->supplies);
 496 }
 497
 498 /* Find nearest matching image pixel size. */
 499 static int s5k4ecgx_try_frame_size(struct v4l2_mbus_framefmt *mf,
 500                                   const struct s5k4ecgx_frmsize **size)
 501 {
 502         unsigned int min_err = ~0;
 503         int i = ARRAY_SIZE(s5k4ecgx_prev_sizes);
 504         const struct s5k4ecgx_frmsize *fsize = &s5k4ecgx_prev_sizes[0],
 505                 *match = NULL;
 506
 507         while (i--) {
 508                 int err = abs(fsize->size.width - mf->width)
 509                                 + abs(fsize->size.height - mf->height);
 510                 if (err < min_err) {
 511                         min_err = err;
 512                         match = fsize;
 513                 }
 514                 fsize++;
 515         }
 516         if (match) {
 517                 mf->width  = match->size.width;
 518                 mf->height = match->size.height;
 519                 if (size)
 520                         *size = match;
 521                 return 0;
 522         }
 523
 524         return -EINVAL;
 525 }
 526
 527 static int s5k4ecgx_enum_mbus_code(struct v4l2_subdev *sd,
 528                                    struct v4l2_subdev_state *sd_state,
 529                                    struct v4l2_subdev_mbus_code_enum *code)
 530 {
 531         if (code->index >= ARRAY_SIZE(s5k4ecgx_formats))
 532                 return -EINVAL;
 533         code->code = s5k4ecgx_formats[code->index].code;
 534
 535         return 0;
 536 }
 537
 538 static int s5k4ecgx_get_fmt(struct v4l2_subdev *sd,
 539                             struct v4l2_subdev_state *sd_state,
 540                             struct v4l2_subdev_format *fmt)
 541 {
 542         struct s5k4ecgx *priv = to_s5k4ecgx(sd);
 543         struct v4l2_mbus_framefmt *mf;
 544
 545         if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
 546                 if (sd_state) {
 547                         mf = v4l2_subdev_get_try_format(sd, sd_state, 0);
 548                         fmt->format = *mf;
 549                 }
 550                 return 0;
 551         }
 552
 553         mf = &fmt->format;
 554
 555         mutex_lock(&priv->lock);
 556         mf->width = priv->curr_frmsize->size.width;
 557         mf->height = priv->curr_frmsize->size.height;
 558         mf->code = priv->curr_pixfmt->code;
 559         mf->colorspace = priv->curr_pixfmt->colorspace;
 560         mf->field = V4L2_FIELD_NONE;
 561         mutex_unlock(&priv->lock);
 562
 563         return 0;
 564 }
 565
 566 static const struct s5k4ecgx_pixfmt *s5k4ecgx_try_fmt(struct v4l2_subdev *sd,
 567                                             struct v4l2_mbus_framefmt *mf)
 568 {
 569         int i = ARRAY_SIZE(s5k4ecgx_formats);
 570
 571         while (--i)
 572                 if (mf->code == s5k4ecgx_formats[i].code)
 573                         break;
 574         mf->code = s5k4ecgx_formats[i].code;
 575
 576         return &s5k4ecgx_formats[i];
 577 }
 578
 579 static int s5k4ecgx_set_fmt(struct v4l2_subdev *sd,
 580                             struct v4l2_subdev_state *sd_state,
 581                             struct v4l2_subdev_format *fmt)
 582 {
 583         struct s5k4ecgx *priv = to_s5k4ecgx(sd);
 584         const struct s5k4ecgx_frmsize *fsize = NULL;
 585         const struct s5k4ecgx_pixfmt *pf;
 586         struct v4l2_mbus_framefmt *mf;
 587         int ret = 0;
 588
 589         pf = s5k4ecgx_try_fmt(sd, &fmt->format);
 590         s5k4ecgx_try_frame_size(&fmt->format, &fsize);
 591         fmt->format.colorspace = V4L2_COLORSPACE_JPEG;
 592         fmt->format.field = V4L2_FIELD_NONE;
 593
 594         if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
 595                 if (sd_state) {
 596                         mf = v4l2_subdev_get_try_format(sd, sd_state, 0);
 597                         *mf = fmt->format;
 598                 }
 599                 return 0;
 600         }
 601
 602         mutex_lock(&priv->lock);
 603         if (!priv->streaming) {
 604                 priv->curr_frmsize = fsize;
 605                 priv->curr_pixfmt = pf;
 606                 priv->set_params = 1;
 607         } else {
 608                 ret = -EBUSY;
 609         }
 610         mutex_unlock(&priv->lock);
 611
 612         return ret;
 613 }
 614
 615 static const struct v4l2_subdev_pad_ops s5k4ecgx_pad_ops = {
 616         .enum_mbus_code = s5k4ecgx_enum_mbus_code,
 617         .get_fmt        = s5k4ecgx_get_fmt,
 618         .set_fmt        = s5k4ecgx_set_fmt,
 619 };
 620
 621 /*
 622  * V4L2 subdev controls
 623  */
 624 static int s5k4ecgx_s_ctrl(struct v4l2_ctrl *ctrl)
 625 {
 626         struct v4l2_subdev *sd = &container_of(ctrl->handler, struct s5k4ecgx,
 627                                                 handler)->sd;
 628         struct i2c_client *client = v4l2_get_subdevdata(sd);
 629         struct s5k4ecgx *priv = to_s5k4ecgx(sd);
 630         unsigned int i;
 631         int err = 0;
 632
 633         v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val);
 634
 635         mutex_lock(&priv->lock);
 636         switch (ctrl->id) {
 637         case V4L2_CID_CONTRAST:
 638                 err = s5k4ecgx_write(client, REG_USER_CONTRAST, ctrl->val);
 639                 break;
 640
 641         case V4L2_CID_SATURATION:
 642                 err = s5k4ecgx_write(client, REG_USER_SATURATION, ctrl->val);
 643                 break;
 644
 645         case V4L2_CID_SHARPNESS:
 646                 /* TODO: Revisit, is this setting for all presets ? */
 647                 for (i = 0; i < 4 && !err; i++)
 648                         err = s5k4ecgx_write(client, REG_USER_SHARPNESS(i),
 649                                              ctrl->val * SHARPNESS_DIV);
 650                 break;
 651
 652         case V4L2_CID_BRIGHTNESS:
 653                 err = s5k4ecgx_write(client, REG_USER_BRIGHTNESS, ctrl->val);
 654                 break;
 655         }
 656         mutex_unlock(&priv->lock);
 657         if (err < 0)
 658                 v4l2_err(sd, "Failed to write s_ctrl err %d\n", err);
 659
 660         return err;
 661 }
 662
 663 static const struct v4l2_ctrl_ops s5k4ecgx_ctrl_ops = {
 664         .s_ctrl = s5k4ecgx_s_ctrl,
 665 };
 666
 667 /*
 668  * Reading s5k4ecgx version information
 669  */
 670 static int s5k4ecgx_registered(struct v4l2_subdev *sd)
 671 {
 672         int ret;
 673         struct s5k4ecgx *priv = to_s5k4ecgx(sd);
 674
 675         mutex_lock(&priv->lock);
 676         ret = __s5k4ecgx_power_on(priv);
 677         if (!ret) {
 678                 ret = s5k4ecgx_read_fw_ver(sd);
 679                 __s5k4ecgx_power_off(priv);
 680         }
 681         mutex_unlock(&priv->lock);
 682
 683         return ret;
 684 }
 685
 686 /*
 687  * V4L2 subdev internal operations
 688  */
 689 static int s5k4ecgx_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 690 {
 691         struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(sd,
 692                                                                    fh->state,
 693                                                                    0);
 694
 695         mf->width = s5k4ecgx_prev_sizes[0].size.width;
 696         mf->height = s5k4ecgx_prev_sizes[0].size.height;
 697         mf->code = s5k4ecgx_formats[0].code;
 698         mf->colorspace = V4L2_COLORSPACE_JPEG;
 699         mf->field = V4L2_FIELD_NONE;
 700
 701         return 0;
 702 }
 703
 704 static const struct v4l2_subdev_internal_ops s5k4ecgx_subdev_internal_ops = {
 705         .registered = s5k4ecgx_registered,
 706         .open = s5k4ecgx_open,
 707 };
 708
 709 static int s5k4ecgx_s_power(struct v4l2_subdev *sd, int on)
 710 {
 711         struct s5k4ecgx *priv = to_s5k4ecgx(sd);
 712         int ret;
 713
 714         v4l2_dbg(1, debug, sd, "Switching %s\n", on ? "on" : "off");
 715
 716         if (on) {
 717                 ret = __s5k4ecgx_power_on(priv);
 718                 if (ret < 0)
 719                         return ret;
 720                 /* Time to stabilize sensor */
 721                 msleep(100);
 722                 ret = s5k4ecgx_init_sensor(sd);
 723                 if (ret < 0)
 724                         __s5k4ecgx_power_off(priv);
 725                 else
 726                         priv->set_params = 1;
 727         } else {
 728                 ret = __s5k4ecgx_power_off(priv);
 729         }
 730
 731         return ret;
 732 }
 733
 734 static int s5k4ecgx_log_status(struct v4l2_subdev *sd)
 735 {
 736         v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name);
 737
 738         return 0;
 739 }
 740
 741 static const struct v4l2_subdev_core_ops s5k4ecgx_core_ops = {
 742         .s_power        = s5k4ecgx_s_power,
 743         .log_status     = s5k4ecgx_log_status,
 744 };
 745
 746 static int __s5k4ecgx_s_params(struct s5k4ecgx *priv)
 747 {
 748         struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
 749         const struct v4l2_rect *crop_rect = &priv->curr_frmsize->input_window;
 750         int ret;
 751
 752         ret = s5k4ecgx_set_input_window(client, crop_rect);
 753         if (!ret)
 754                 ret = s5k4ecgx_set_zoom_window(client, crop_rect);
 755         if (!ret)
 756                 ret = s5k4ecgx_write(client, REG_G_INPUTS_CHANGE_REQ, 1);
 757         if (!ret)
 758                 ret = s5k4ecgx_write(client, 0x70000a1e, 0x28);
 759         if (!ret)
 760                 ret = s5k4ecgx_write(client, 0x70000ad4, 0x3c);
 761         if (!ret)
 762                 ret = s5k4ecgx_set_output_framefmt(priv);
 763         if (!ret)
 764                 ret = s5k4ecgx_write(client, REG_P_PVI_MASK(0), 0x52);
 765         if (!ret)
 766                 ret = s5k4ecgx_write(client, REG_P_FR_TIME_TYPE(0),
 767                                      FR_TIME_DYNAMIC);
 768         if (!ret)
 769                 ret = s5k4ecgx_write(client, REG_P_FR_TIME_Q_TYPE(0),
 770                                      FR_TIME_Q_BEST_FRRATE);
 771         if (!ret)
 772                 ret = s5k4ecgx_write(client,  REG_P_MIN_FR_TIME(0),
 773                                      US_TO_FR_TIME(33300));
 774         if (!ret)
 775                 ret = s5k4ecgx_write(client, REG_P_MAX_FR_TIME(0),
 776                                      US_TO_FR_TIME(66600));
 777         if (!ret)
 778                 ret = s5k4ecgx_write(client, REG_P_PREV_MIRROR(0), 0);
 779         if (!ret)
 780                 ret = s5k4ecgx_write(client, REG_P_CAP_MIRROR(0), 0);
 781         if (!ret)
 782                 ret = s5k4ecgx_write(client, REG_G_ACTIVE_PREV_CFG, 0);
 783         if (!ret)
 784                 ret = s5k4ecgx_write(client, REG_G_PREV_OPEN_AFTER_CH, 1);
 785         if (!ret)
 786                 ret = s5k4ecgx_write(client, REG_G_NEW_CFG_SYNC, 1);
 787         if (!ret)
 788                 ret = s5k4ecgx_write(client, REG_G_PREV_CFG_CHG, 1);
 789
 790         return ret;
 791 }
 792
 793 static int __s5k4ecgx_s_stream(struct s5k4ecgx *priv, int on)
 794 {
 795         struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
 796         int ret;
 797
 798         if (on && priv->set_params) {
 799                 ret = __s5k4ecgx_s_params(priv);
 800                 if (ret < 0)
 801                         return ret;
 802                 priv->set_params = 0;
 803         }
 804         /*
 805          * This enables/disables preview stream only. Capture requests
 806          * are not supported yet.
 807          */
 808         ret = s5k4ecgx_write(client, REG_G_ENABLE_PREV, on);
 809         if (ret < 0)
 810                 return ret;
 811         return s5k4ecgx_write(client, REG_G_ENABLE_PREV_CHG, 1);
 812 }
 813
 814 static int s5k4ecgx_s_stream(struct v4l2_subdev *sd, int on)
 815 {
 816         struct s5k4ecgx *priv = to_s5k4ecgx(sd);
 817         int ret = 0;
 818
 819         v4l2_dbg(1, debug, sd, "Turn streaming %s\n", on ? "on" : "off");
 820
 821         mutex_lock(&priv->lock);
 822
 823         if (priv->streaming == !on) {
 824                 ret = __s5k4ecgx_s_stream(priv, on);
 825                 if (!ret)
 826                         priv->streaming = on & 1;
 827         }
 828
 829         mutex_unlock(&priv->lock);
 830         return ret;
 831 }
 832
 833 static const struct v4l2_subdev_video_ops s5k4ecgx_video_ops = {
 834         .s_stream = s5k4ecgx_s_stream,
 835 };
 836
 837 static const struct v4l2_subdev_ops s5k4ecgx_ops = {
 838         .core = &s5k4ecgx_core_ops,
 839         .pad = &s5k4ecgx_pad_ops,
 840         .video = &s5k4ecgx_video_ops,
 841 };
 842
 843 /*
 844  * GPIO setup
 845  */
 846 static int s5k4ecgx_config_gpio(int nr, int val, const char *name)
 847 {
 848         unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
 849         int ret;
 850
 851         if (!gpio_is_valid(nr))
 852                 return 0;
 853         ret = gpio_request_one(nr, flags, name);
 854         if (!ret)
 855                 gpio_export(nr, 0);
 856
 857         return ret;
 858 }
 859
 860 static void s5k4ecgx_free_gpios(struct s5k4ecgx *priv)
 861 {
 862         int i;
 863
 864         for (i = 0; i < ARRAY_SIZE(priv->gpio); i++) {
 865                 if (!gpio_is_valid(priv->gpio[i].gpio))
 866                         continue;
 867                 gpio_free(priv->gpio[i].gpio);
 868                 priv->gpio[i].gpio = -EINVAL;
 869         }
 870 }
 871
 872 static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv,
 873                                   const struct s5k4ecgx_platform_data *pdata)
 874 {
 875         const struct s5k4ecgx_gpio *gpio = &pdata->gpio_stby;
 876         int ret;
 877
 878         priv->gpio[STBY].gpio = -EINVAL;
 879         priv->gpio[RSET].gpio  = -EINVAL;
 880
 881         ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY");
 882
 883         if (ret) {
 884                 s5k4ecgx_free_gpios(priv);
 885                 return ret;
 886         }
 887         priv->gpio[STBY] = *gpio;
 888         if (gpio_is_valid(gpio->gpio))
 889                 gpio_set_value(gpio->gpio, 0);
 890
 891         gpio = &pdata->gpio_reset;
 892
 893         ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_RST");
 894         if (ret) {
 895                 s5k4ecgx_free_gpios(priv);
 896                 return ret;
 897         }
 898         priv->gpio[RSET] = *gpio;
 899         if (gpio_is_valid(gpio->gpio))
 900                 gpio_set_value(gpio->gpio, 0);
 901
 902         return 0;
 903 }
 904
 905 static int s5k4ecgx_init_v4l2_ctrls(struct s5k4ecgx *priv)
 906 {
 907         const struct v4l2_ctrl_ops *ops = &s5k4ecgx_ctrl_ops;
 908         struct v4l2_ctrl_handler *hdl = &priv->handler;
 909         int ret;
 910
 911         ret = v4l2_ctrl_handler_init(hdl, 4);
 912         if (ret)
 913                 return ret;
 914
 915         v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -208, 127, 1, 0);
 916         v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
 917         v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
 918
 919         /* Sharpness default is 24612, and then (24612/SHARPNESS_DIV) = 2 */
 920         v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -32704/SHARPNESS_DIV,
 921                           24612/SHARPNESS_DIV, 1, 2);
 922         if (hdl->error) {
 923                 ret = hdl->error;
 924                 v4l2_ctrl_handler_free(hdl);
 925                 return ret;
 926         }
 927         priv->sd.ctrl_handler = hdl;
 928
 929         return 0;
 930 };
 931
 932 static int s5k4ecgx_probe(struct i2c_client *client,
 933                           const struct i2c_device_id *id)
 934 {
 935         struct s5k4ecgx_platform_data *pdata = client->dev.platform_data;
 936         struct v4l2_subdev *sd;
 937         struct s5k4ecgx *priv;
 938         int ret, i;
 939
 940         if (pdata == NULL) {
 941                 dev_err(&client->dev, "platform data is missing!\n");
 942                 return -EINVAL;
 943         }
 944
 945         priv = devm_kzalloc(&client->dev, sizeof(struct s5k4ecgx), GFP_KERNEL);
 946         if (!priv)
 947                 return -ENOMEM;
 948
 949         mutex_init(&priv->lock);
 950         priv->streaming = 0;
 951
 952         sd = &priv->sd;
 953         /* Registering subdev */
 954         v4l2_i2c_subdev_init(sd, client, &s5k4ecgx_ops);
 955         /* Static name; NEVER use in new drivers! */
 956         strscpy(sd->name, S5K4ECGX_DRIVER_NAME, sizeof(sd->name));
 957
 958         sd->internal_ops = &s5k4ecgx_subdev_internal_ops;
 959         /* Support v4l2 sub-device user space API */
 960         sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
 961
 962         priv->pad.flags = MEDIA_PAD_FL_SOURCE;
 963         sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
 964         ret = media_entity_pads_init(&sd->entity, 1, &priv->pad);
 965         if (ret)
 966                 return ret;
 967
 968         ret = s5k4ecgx_config_gpios(priv, pdata);
 969         if (ret) {
 970                 dev_err(&client->dev, "Failed to set gpios\n");
 971                 goto out_err1;
 972         }
 973         for (i = 0; i < S5K4ECGX_NUM_SUPPLIES; i++)
 974                 priv->supplies[i].supply = s5k4ecgx_supply_names[i];
 975
 976         ret = devm_regulator_bulk_get(&client->dev, S5K4ECGX_NUM_SUPPLIES,
 977                                  priv->supplies);
 978         if (ret) {
 979                 dev_err(&client->dev, "Failed to get regulators\n");
 980                 goto out_err2;
 981         }
 982         ret = s5k4ecgx_init_v4l2_ctrls(priv);
 983         if (ret)
 984                 goto out_err2;
 985
 986         priv->curr_pixfmt = &s5k4ecgx_formats[0];
 987         priv->curr_frmsize = &s5k4ecgx_prev_sizes[0];
 988
 989         return 0;
 990
 991 out_err2:
 992         s5k4ecgx_free_gpios(priv);
 993 out_err1:
 994         media_entity_cleanup(&priv->sd.entity);
 995
 996         return ret;
 997 }
 998
 999 static void s5k4ecgx_remove(struct i2c_client *client)
1000 {
1001         struct v4l2_subdev *sd = i2c_get_clientdata(client);
1002         struct s5k4ecgx *priv = to_s5k4ecgx(sd);
1003
1004         mutex_destroy(&priv->lock);
1005         s5k4ecgx_free_gpios(priv);
1006         v4l2_device_unregister_subdev(sd);
1007         v4l2_ctrl_handler_free(&priv->handler);
1008         media_entity_cleanup(&sd->entity);
1009 }
1010
1011 static const struct i2c_device_id s5k4ecgx_id[] = {
1012         { S5K4ECGX_DRIVER_NAME, 0 },
1013         {}
1014 };
1015 MODULE_DEVICE_TABLE(i2c, s5k4ecgx_id);
1016
1017 static struct i2c_driver v4l2_i2c_driver = {
1018         .driver = {
1019                 .name = S5K4ECGX_DRIVER_NAME,
1020         },
1021         .probe = s5k4ecgx_probe,
1022         .remove = s5k4ecgx_remove,
1023         .id_table = s5k4ecgx_id,
1024 };
1025
1026 module_i2c_driver(v4l2_i2c_driver);
1027
1028 MODULE_DESCRIPTION("Samsung S5K4ECGX 5MP SOC camera");
1029 MODULE_AUTHOR("Sangwook Lee <sangwook.lee@linaro.org>");
1030 MODULE_AUTHOR("Seok-Young Jang <quartz.jang@samsung.com>");
1031 MODULE_LICENSE("GPL");
1032 /*(DEBLOBBED)*/