2 * Omnivision OV9650/OV9652 CMOS Image Sensor driver
4 * Copyright (C) 2013, Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
6 * Register definitions and initial settings based on a driver written
8 * Copyright (c) 2010, Vladimir Fonov
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/gpio.h>
16 #include <linux/i2c.h>
17 #include <linux/kernel.h>
18 #include <linux/media.h>
19 #include <linux/module.h>
20 #include <linux/ratelimit.h>
21 #include <linux/slab.h>
22 #include <linux/string.h>
23 #include <linux/videodev2.h>
25 #include <media/media-entity.h>
26 #include <media/v4l2-ctrls.h>
27 #include <media/v4l2-device.h>
28 #include <media/v4l2-event.h>
29 #include <media/v4l2-image-sizes.h>
30 #include <media/v4l2-subdev.h>
31 #include <media/v4l2-mediabus.h>
32 #include <media/ov9650.h>
35 module_param(debug, int, 0644);
36 MODULE_PARM_DESC(debug, "Debug level (0-2)");
38 #define DRIVER_NAME "OV9650"
41 * OV9650/OV9652 register definitions
43 #define REG_GAIN 0x00 /* Gain control, AGC[7:0] */
44 #define REG_BLUE 0x01 /* AWB - Blue chanel gain */
45 #define REG_RED 0x02 /* AWB - Red chanel gain */
46 #define REG_VREF 0x03 /* [7:6] - AGC[9:8], [5:3]/[2:0] */
47 #define VREF_GAIN_MASK 0xc0 /* - VREF end/start low 3 bits */
49 #define COM1_CCIR656 0x40
50 #define REG_B_AVE 0x05
51 #define REG_GB_AVE 0x06
52 #define REG_GR_AVE 0x07
53 #define REG_R_AVE 0x08
55 #define REG_PID 0x0a /* Product ID MSB */
56 #define REG_VER 0x0b /* Product ID LSB */
58 #define COM3_SWAP 0x40
59 #define COM3_VARIOPIXEL1 0x04
60 #define REG_COM4 0x0d /* Vario Pixels */
61 #define COM4_VARIOPIXEL2 0x80
62 #define REG_COM5 0x0e /* System clock options */
63 #define COM5_SLAVE_MODE 0x10
64 #define COM5_SYSTEMCLOCK48MHZ 0x80
65 #define REG_COM6 0x0f /* HREF & ADBLC options */
66 #define REG_AECH 0x10 /* Exposure value, AEC[9:2] */
67 #define REG_CLKRC 0x11 /* Clock control */
68 #define CLK_EXT 0x40 /* Use external clock directly */
69 #define CLK_SCALE 0x3f /* Mask for internal clock scale */
70 #define REG_COM7 0x12 /* SCCB reset, output format */
71 #define COM7_RESET 0x80
72 #define COM7_FMT_MASK 0x38
73 #define COM7_FMT_VGA 0x40
74 #define COM7_FMT_CIF 0x20
75 #define COM7_FMT_QVGA 0x10
76 #define COM7_FMT_QCIF 0x08
79 #define COM7_BAYER 0x01
80 #define COM7_PBAYER 0x05
81 #define REG_COM8 0x13 /* AGC/AEC options */
82 #define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */
83 #define COM8_AECSTEP 0x40 /* Unlimited AEC step size */
84 #define COM8_BFILT 0x20 /* Band filter enable */
85 #define COM8_AGC 0x04 /* Auto gain enable */
86 #define COM8_AWB 0x02 /* White balance enable */
87 #define COM8_AEC 0x01 /* Auto exposure enable */
88 #define REG_COM9 0x14 /* Gain ceiling */
89 #define COM9_GAIN_CEIL_MASK 0x70 /* */
90 #define REG_COM10 0x15 /* PCLK, HREF, HSYNC signals polarity */
91 #define COM10_HSYNC 0x40 /* HSYNC instead of HREF */
92 #define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */
93 #define COM10_HREF_REV 0x08 /* Reverse HREF */
94 #define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */
95 #define COM10_VS_NEG 0x02 /* VSYNC negative */
96 #define COM10_HS_NEG 0x01 /* HSYNC negative */
97 #define REG_HSTART 0x17 /* Horiz start high bits */
98 #define REG_HSTOP 0x18 /* Horiz stop high bits */
99 #define REG_VSTART 0x19 /* Vert start high bits */
100 #define REG_VSTOP 0x1a /* Vert stop high bits */
101 #define REG_PSHFT 0x1b /* Pixel delay after HREF */
102 #define REG_MIDH 0x1c /* Manufacturer ID MSB */
103 #define REG_MIDL 0x1d /* Manufufacturer ID LSB */
104 #define REG_MVFP 0x1e /* Image mirror/flip */
105 #define MVFP_MIRROR 0x20 /* Mirror image */
106 #define MVFP_FLIP 0x10 /* Vertical flip */
107 #define REG_BOS 0x20 /* B channel Offset */
108 #define REG_GBOS 0x21 /* Gb channel Offset */
109 #define REG_GROS 0x22 /* Gr channel Offset */
110 #define REG_ROS 0x23 /* R channel Offset */
111 #define REG_AEW 0x24 /* AGC upper limit */
112 #define REG_AEB 0x25 /* AGC lower limit */
113 #define REG_VPT 0x26 /* AGC/AEC fast mode op region */
114 #define REG_BBIAS 0x27 /* B channel output bias */
115 #define REG_GBBIAS 0x28 /* Gb channel output bias */
116 #define REG_GRCOM 0x29 /* Analog BLC & regulator */
117 #define REG_EXHCH 0x2a /* Dummy pixel insert MSB */
118 #define REG_EXHCL 0x2b /* Dummy pixel insert LSB */
119 #define REG_RBIAS 0x2c /* R channel output bias */
120 #define REG_ADVFL 0x2d /* LSB of dummy line insert */
121 #define REG_ADVFH 0x2e /* MSB of dummy line insert */
122 #define REG_YAVE 0x2f /* Y/G channel average value */
123 #define REG_HSYST 0x30 /* HSYNC rising edge delay LSB*/
124 #define REG_HSYEN 0x31 /* HSYNC falling edge delay LSB*/
125 #define REG_HREF 0x32 /* HREF pieces */
126 #define REG_CHLF 0x33 /* reserved */
127 #define REG_ADC 0x37 /* reserved */
128 #define REG_ACOM 0x38 /* reserved */
129 #define REG_OFON 0x39 /* Power down register */
130 #define OFON_PWRDN 0x08 /* Power down bit */
131 #define REG_TSLB 0x3a /* YUVU format */
132 #define TSLB_YUYV_MASK 0x0c /* UYVY or VYUY - see com13 */
133 #define REG_COM11 0x3b /* Night mode, banding filter enable */
134 #define COM11_NIGHT 0x80 /* Night mode enable */
135 #define COM11_NMFR 0x60 /* Two bit NM frame rate */
136 #define COM11_BANDING 0x01 /* Banding filter */
137 #define COM11_AEC_REF_MASK 0x18 /* AEC reference area selection */
138 #define REG_COM12 0x3c /* HREF option, UV average */
139 #define COM12_HREF 0x80 /* HREF always */
140 #define REG_COM13 0x3d /* Gamma selection, Color matrix en. */
141 #define COM13_GAMMA 0x80 /* Gamma enable */
142 #define COM13_UVSAT 0x40 /* UV saturation auto adjustment */
143 #define COM13_UVSWAP 0x01 /* V before U - w/TSLB */
144 #define REG_COM14 0x3e /* Edge enhancement options */
145 #define COM14_EDGE_EN 0x02
146 #define COM14_EEF_X2 0x01
147 #define REG_EDGE 0x3f /* Edge enhancement factor */
148 #define EDGE_FACTOR_MASK 0x0f
149 #define REG_COM15 0x40 /* Output range, RGB 555/565 */
150 #define COM15_R10F0 0x00 /* Data range 10 to F0 */
151 #define COM15_R01FE 0x80 /* 01 to FE */
152 #define COM15_R00FF 0xc0 /* 00 to FF */
153 #define COM15_RGB565 0x10 /* RGB565 output */
154 #define COM15_RGB555 0x30 /* RGB555 output */
155 #define COM15_SWAPRB 0x04 /* Swap R&B */
156 #define REG_COM16 0x41 /* Color matrix coeff options */
157 #define REG_COM17 0x42 /* Single frame out, banding filter */
158 /* n = 1...9, 0x4f..0x57 */
159 #define REG_MTX(__n) (0x4f + (__n) - 1)
160 #define REG_MTXS 0x58
161 /* Lens Correction Option 1...5, __n = 0...5 */
162 #define REG_LCC(__n) (0x62 + (__n) - 1)
163 #define LCC5_LCC_ENABLE 0x01 /* LCC5, enable lens correction */
164 #define LCC5_LCC_COLOR 0x04
165 #define REG_MANU 0x67 /* Manual U value */
166 #define REG_MANV 0x68 /* Manual V value */
167 #define REG_HV 0x69 /* Manual banding filter MSB */
168 #define REG_MBD 0x6a /* Manual banding filter value */
169 #define REG_DBLV 0x6b /* reserved */
170 #define REG_GSP 0x6c /* Gamma curve */
172 #define REG_GST 0x7c /* Gamma curve */
174 #define REG_COM21 0x8b
175 #define REG_COM22 0x8c /* Edge enhancement, denoising */
176 #define COM22_WHTPCOR 0x02 /* White pixel correction enable */
177 #define COM22_WHTPCOROPT 0x01 /* White pixel correction option */
178 #define COM22_DENOISE 0x10 /* White pixel correction option */
179 #define REG_COM23 0x8d /* Color bar test, color gain */
180 #define COM23_TEST_MODE 0x10
181 #define REG_DBLC1 0x8f /* Digital BLC */
182 #define REG_DBLC_B 0x90 /* Digital BLC B channel offset */
183 #define REG_DBLC_R 0x91 /* Digital BLC R channel offset */
184 #define REG_DM_LNL 0x92 /* Dummy line low 8 bits */
185 #define REG_DM_LNH 0x93 /* Dummy line high 8 bits */
186 #define REG_LCCFB 0x9d /* Lens Correction B channel */
187 #define REG_LCCFR 0x9e /* Lens Correction R channel */
188 #define REG_DBLC_GB 0x9f /* Digital BLC GB chan offset */
189 #define REG_DBLC_GR 0xa0 /* Digital BLC GR chan offset */
190 #define REG_AECHM 0xa1 /* Exposure value - bits AEC[15:10] */
191 #define REG_BD50ST 0xa2 /* Banding filter value for 50Hz */
192 #define REG_BD60ST 0xa3 /* Banding filter value for 60Hz */
193 #define REG_NULL 0xff /* Array end token */
195 #define DEF_CLKRC 0x80
197 #define OV965X_ID(_msb, _lsb) ((_msb) << 8 | (_lsb))
198 #define OV9650_ID 0x9650
199 #define OV9652_ID 0x9652
201 struct ov965x_ctrls {
202 struct v4l2_ctrl_handler handler;
204 struct v4l2_ctrl *auto_exp;
205 struct v4l2_ctrl *exposure;
208 struct v4l2_ctrl *auto_wb;
209 struct v4l2_ctrl *blue_balance;
210 struct v4l2_ctrl *red_balance;
213 struct v4l2_ctrl *hflip;
214 struct v4l2_ctrl *vflip;
217 struct v4l2_ctrl *auto_gain;
218 struct v4l2_ctrl *gain;
220 struct v4l2_ctrl *brightness;
221 struct v4l2_ctrl *saturation;
222 struct v4l2_ctrl *sharpness;
223 struct v4l2_ctrl *light_freq;
227 struct ov965x_framesize {
234 struct ov965x_interval {
235 struct v4l2_fract interval;
236 /* Maximum resolution for this interval */
237 struct v4l2_frmsize_discrete size;
248 struct v4l2_subdev sd;
249 struct media_pad pad;
250 enum v4l2_mbus_type bus_type;
251 int gpios[NUM_GPIOS];
252 /* External master clock frequency */
253 unsigned long mclk_frequency;
255 /* Protects the struct fields below */
258 struct i2c_client *client;
260 /* Exposure row interval in us */
261 unsigned int exp_row_interval;
264 const struct ov965x_framesize *frame_size;
265 /* YUYV sequence (pixel format) control register */
267 struct v4l2_mbus_framefmt format;
269 struct ov965x_ctrls ctrls;
270 /* Pointer to frame rate control data structure */
271 const struct ov965x_interval *fiv;
284 static const struct i2c_rv ov965x_init_regs[] = {
285 { REG_COM2, 0x10 }, /* Set soft sleep mode */
286 { REG_COM5, 0x00 }, /* System clock options */
287 { REG_COM2, 0x01 }, /* Output drive, soft sleep mode */
288 { REG_COM10, 0x00 }, /* Slave mode, HREF vs HSYNC, signals negate */
289 { REG_EDGE, 0xa6 }, /* Edge enhancement treshhold and factor */
290 { REG_COM16, 0x02 }, /* Color matrix coeff double option */
291 { REG_COM17, 0x08 }, /* Single frame out, banding filter */
293 { REG_CHLF, 0xc0 }, /* Reserved */
298 { REG_COM12, 0x77 }, /* HREF option, UV average */
303 { REG_COM15, 0xc1 }, /* Output range, RGB 555/565 */
304 { REG_GRCOM, 0x2f }, /* Analog BLC & regulator */
305 { REG_COM6, 0x43 }, /* HREF & ADBLC options */
306 { REG_COM8, 0xe5 }, /* AGC/AEC options */
307 { REG_COM13, 0x90 }, /* Gamma selection, colour matrix, UV delay */
308 { REG_HV, 0x80 }, /* Manual banding filter MSB */
309 { 0x5c, 0x96 }, /* Reserved up to 0xa5 */
325 { 0xa4, 0x74 }, /* reserved */
326 { REG_COM23, 0x02 }, /* Color gain analog/_digital_ */
327 { REG_COM8, 0xe7 }, /* Enable AEC, AWB, AEC */
328 { REG_COM22, 0x23 }, /* Edge enhancement, denoising */
332 { REG_DBLC1, 0xdf }, /* Digital BLC */
333 { REG_DBLC_B, 0x00 }, /* Digital BLC B chan offset */
334 { REG_DBLC_R, 0x00 }, /* Digital BLC R chan offset */
335 { REG_DBLC_GB, 0x00 }, /* Digital BLC GB chan offset */
336 { REG_DBLC_GR, 0x00 },
337 { REG_COM9, 0x3a }, /* Gain ceiling 16x */
341 #define NUM_FMT_REGS 14
343 * COM7, COM3, COM4, HSTART, HSTOP, HREF, VSTART, VSTOP, VREF,
344 * EXHCH, EXHCL, ADC, OCOM, OFON
346 static const u8 frame_size_reg_addr[NUM_FMT_REGS] = {
347 0x12, 0x0c, 0x0d, 0x17, 0x18, 0x32, 0x19, 0x1a, 0x03,
348 0x2a, 0x2b, 0x37, 0x38, 0x39,
351 static const u8 ov965x_sxga_regs[NUM_FMT_REGS] = {
352 0x00, 0x00, 0x00, 0x1e, 0xbe, 0xbf, 0x01, 0x81, 0x12,
353 0x10, 0x34, 0x81, 0x93, 0x51,
356 static const u8 ov965x_vga_regs[NUM_FMT_REGS] = {
357 0x40, 0x04, 0x80, 0x26, 0xc6, 0xed, 0x01, 0x3d, 0x00,
358 0x10, 0x40, 0x91, 0x12, 0x43,
361 /* Determined empirically. */
362 static const u8 ov965x_qvga_regs[NUM_FMT_REGS] = {
363 0x10, 0x04, 0x80, 0x25, 0xc5, 0xbf, 0x00, 0x80, 0x12,
364 0x10, 0x40, 0x91, 0x12, 0x43,
367 static const struct ov965x_framesize ov965x_framesizes[] = {
370 .height = SXGA_HEIGHT,
371 .regs = ov965x_sxga_regs,
372 .max_exp_lines = 1048,
375 .height = VGA_HEIGHT,
376 .regs = ov965x_vga_regs,
377 .max_exp_lines = 498,
380 .height = QVGA_HEIGHT,
381 .regs = ov965x_qvga_regs,
382 .max_exp_lines = 248,
386 struct ov965x_pixfmt {
389 /* REG_TSLB value, only bits [3:2] may be set. */
393 static const struct ov965x_pixfmt ov965x_formats[] = {
394 { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 0x00},
395 { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG, 0x04},
396 { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG, 0x0c},
397 { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG, 0x08},
401 * This table specifies possible frame resolution and interval
402 * combinations. Default CLKRC[5:0] divider values are valid
403 * only for 24 MHz external clock frequency.
405 static struct ov965x_interval ov965x_intervals[] = {
406 {{ 100, 625 }, { SXGA_WIDTH, SXGA_HEIGHT }, 0 }, /* 6.25 fps */
407 {{ 10, 125 }, { VGA_WIDTH, VGA_HEIGHT }, 1 }, /* 12.5 fps */
408 {{ 10, 125 }, { QVGA_WIDTH, QVGA_HEIGHT }, 3 }, /* 12.5 fps */
409 {{ 1, 25 }, { VGA_WIDTH, VGA_HEIGHT }, 0 }, /* 25 fps */
410 {{ 1, 25 }, { QVGA_WIDTH, QVGA_HEIGHT }, 1 }, /* 25 fps */
413 static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
415 return &container_of(ctrl->handler, struct ov965x, ctrls.handler)->sd;
418 static inline struct ov965x *to_ov965x(struct v4l2_subdev *sd)
420 return container_of(sd, struct ov965x, sd);
423 static int ov965x_read(struct i2c_client *client, u8 addr, u8 *val)
426 struct i2c_msg msg = {
427 .addr = client->addr,
434 ret = i2c_transfer(client->adapter, &msg, 1);
436 msg.flags = I2C_M_RD;
437 ret = i2c_transfer(client->adapter, &msg, 1);
443 v4l2_dbg(2, debug, client, "%s: 0x%02x @ 0x%02x. (%d)\n",
444 __func__, *val, addr, ret);
446 return ret == 1 ? 0 : ret;
449 static int ov965x_write(struct i2c_client *client, u8 addr, u8 val)
451 u8 buf[2] = { addr, val };
453 int ret = i2c_master_send(client, buf, 2);
455 v4l2_dbg(2, debug, client, "%s: 0x%02x @ 0x%02X (%d)\n",
456 __func__, val, addr, ret);
458 return ret == 2 ? 0 : ret;
461 static int ov965x_write_array(struct i2c_client *client,
462 const struct i2c_rv *regs)
466 for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++)
467 ret = ov965x_write(client, regs[i].addr, regs[i].value);
472 static int ov965x_set_default_gamma_curve(struct ov965x *ov965x)
474 static const u8 gamma_curve[] = {
475 /* Values taken from OV application note. */
476 0x40, 0x30, 0x4b, 0x60, 0x70, 0x70, 0x70, 0x70,
477 0x60, 0x60, 0x50, 0x48, 0x3a, 0x2e, 0x28, 0x22,
478 0x04, 0x07, 0x10, 0x28, 0x36, 0x44, 0x52, 0x60,
479 0x6c, 0x78, 0x8c, 0x9e, 0xbb, 0xd2, 0xe6
484 for (i = 0; i < ARRAY_SIZE(gamma_curve); i++) {
485 int ret = ov965x_write(ov965x->client, addr, gamma_curve[i]);
494 static int ov965x_set_color_matrix(struct ov965x *ov965x)
496 static const u8 mtx[] = {
497 /* MTX1..MTX9, MTXS */
498 0x3a, 0x3d, 0x03, 0x12, 0x26, 0x38, 0x40, 0x40, 0x40, 0x0d
500 u8 addr = REG_MTX(1);
503 for (i = 0; i < ARRAY_SIZE(mtx); i++) {
504 int ret = ov965x_write(ov965x->client, addr, mtx[i]);
513 static void ov965x_gpio_set(int gpio, int val)
515 if (gpio_is_valid(gpio))
516 gpio_set_value(gpio, val);
519 static void __ov965x_set_power(struct ov965x *ov965x, int on)
522 ov965x_gpio_set(ov965x->gpios[GPIO_PWDN], 0);
523 ov965x_gpio_set(ov965x->gpios[GPIO_RST], 0);
524 usleep_range(25000, 26000);
526 ov965x_gpio_set(ov965x->gpios[GPIO_RST], 1);
527 ov965x_gpio_set(ov965x->gpios[GPIO_PWDN], 1);
530 ov965x->streaming = 0;
533 static int ov965x_s_power(struct v4l2_subdev *sd, int on)
535 struct ov965x *ov965x = to_ov965x(sd);
536 struct i2c_client *client = ov965x->client;
539 v4l2_dbg(1, debug, client, "%s: on: %d\n", __func__, on);
541 mutex_lock(&ov965x->lock);
542 if (ov965x->power == !on) {
543 __ov965x_set_power(ov965x, on);
545 ret = ov965x_write_array(client,
547 ov965x->apply_frame_fmt = 1;
548 ov965x->ctrls.update = 1;
552 ov965x->power += on ? 1 : -1;
554 WARN_ON(ov965x->power < 0);
555 mutex_unlock(&ov965x->lock);
563 static void ov965x_update_exposure_ctrl(struct ov965x *ov965x)
565 struct v4l2_ctrl *ctrl = ov965x->ctrls.exposure;
566 unsigned long fint, trow;
570 mutex_lock(&ov965x->lock);
571 if (WARN_ON(!ctrl || !ov965x->frame_size)) {
572 mutex_unlock(&ov965x->lock);
575 clkrc = DEF_CLKRC + ov965x->fiv->clkrc_div;
576 /* Calculate internal clock frequency */
577 fint = ov965x->mclk_frequency * ((clkrc >> 7) + 1) /
578 ((2 * ((clkrc & 0x3f) + 1)));
579 /* and the row interval (in us). */
580 trow = (2 * 1520 * 1000000UL) / fint;
581 max = ov965x->frame_size->max_exp_lines * trow;
582 ov965x->exp_row_interval = trow;
583 mutex_unlock(&ov965x->lock);
585 v4l2_dbg(1, debug, &ov965x->sd, "clkrc: %#x, fi: %lu, tr: %lu, %d\n",
586 clkrc, fint, trow, max);
588 /* Update exposure time range to match current frame format. */
589 min = (trow + 100) / 100;
590 max = (max - 100) / 100;
591 def = min + (max - min) / 2;
593 if (v4l2_ctrl_modify_range(ctrl, min, max, 1, def))
594 v4l2_err(&ov965x->sd, "Exposure ctrl range update failed\n");
597 static int ov965x_set_banding_filter(struct ov965x *ov965x, int value)
599 unsigned long mbd, light_freq;
603 ret = ov965x_read(ov965x->client, REG_COM8, ®);
605 if (value == V4L2_CID_POWER_LINE_FREQUENCY_DISABLED)
609 ret = ov965x_write(ov965x->client, REG_COM8, reg);
611 if (value == V4L2_CID_POWER_LINE_FREQUENCY_DISABLED)
613 if (WARN_ON(ov965x->fiv == NULL))
615 /* Set minimal exposure time for 50/60 HZ lighting */
616 if (value == V4L2_CID_POWER_LINE_FREQUENCY_50HZ)
620 mbd = (1000UL * ov965x->fiv->interval.denominator *
621 ov965x->frame_size->max_exp_lines) /
622 ov965x->fiv->interval.numerator;
623 mbd = ((mbd / (light_freq * 2)) + 500) / 1000UL;
625 return ov965x_write(ov965x->client, REG_MBD, mbd);
628 static int ov965x_set_white_balance(struct ov965x *ov965x, int awb)
633 ret = ov965x_read(ov965x->client, REG_COM8, ®);
635 reg = awb ? reg | REG_COM8 : reg & ~REG_COM8;
636 ret = ov965x_write(ov965x->client, REG_COM8, reg);
639 ret = ov965x_write(ov965x->client, REG_BLUE,
640 ov965x->ctrls.blue_balance->val);
643 ret = ov965x_write(ov965x->client, REG_RED,
644 ov965x->ctrls.red_balance->val);
649 #define NUM_BR_LEVELS 7
650 #define NUM_BR_REGS 3
652 static int ov965x_set_brightness(struct ov965x *ov965x, int val)
654 static const u8 regs[NUM_BR_LEVELS + 1][NUM_BR_REGS] = {
655 { REG_AEW, REG_AEB, REG_VPT },
656 { 0x1c, 0x12, 0x50 }, /* -3 */
657 { 0x3d, 0x30, 0x71 }, /* -2 */
658 { 0x50, 0x44, 0x92 }, /* -1 */
659 { 0x70, 0x64, 0xc3 }, /* 0 */
660 { 0x90, 0x84, 0xd4 }, /* +1 */
661 { 0xc4, 0xbf, 0xf9 }, /* +2 */
662 { 0xd8, 0xd0, 0xfa }, /* +3 */
666 val += (NUM_BR_LEVELS / 2 + 1);
667 if (val > NUM_BR_LEVELS)
670 for (i = 0; i < NUM_BR_REGS && !ret; i++)
671 ret = ov965x_write(ov965x->client, regs[0][i],
676 static int ov965x_set_gain(struct ov965x *ov965x, int auto_gain)
678 struct i2c_client *client = ov965x->client;
679 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
683 * For manual mode we need to disable AGC first, so
684 * gain value in REG_VREF, REG_GAIN is not overwritten.
686 if (ctrls->auto_gain->is_new) {
687 ret = ov965x_read(client, REG_COM8, ®);
690 if (ctrls->auto_gain->val)
694 ret = ov965x_write(client, REG_COM8, reg);
699 if (ctrls->gain->is_new && !auto_gain) {
700 unsigned int gain = ctrls->gain->val;
704 * Convert gain control value to the sensor's gain
705 * registers (VREF[7:6], GAIN[7:0]) format.
707 for (m = 6; m >= 0; m--)
708 if (gain >= (1 << m) * 16)
711 /* Sanity check: don't adjust the gain with a negative value */
715 rgain = (gain - ((1 << m) * 16)) / (1 << m);
716 rgain |= (((1 << m) - 1) << 4);
718 ret = ov965x_write(client, REG_GAIN, rgain & 0xff);
721 ret = ov965x_read(client, REG_VREF, ®);
724 reg &= ~VREF_GAIN_MASK;
725 reg |= (((rgain >> 8) & 0x3) << 6);
726 ret = ov965x_write(client, REG_VREF, reg);
729 /* Return updated control's value to userspace */
730 ctrls->gain->val = (1 << m) * (16 + (rgain & 0xf));
736 static int ov965x_set_sharpness(struct ov965x *ov965x, unsigned int value)
741 ret = ov965x_read(ov965x->client, REG_COM14, &com14);
744 ret = ov965x_read(ov965x->client, REG_EDGE, &edge);
747 com14 = value ? com14 | COM14_EDGE_EN : com14 & ~COM14_EDGE_EN;
750 com14 |= COM14_EEF_X2;
753 com14 &= ~COM14_EEF_X2;
755 ret = ov965x_write(ov965x->client, REG_COM14, com14);
759 edge &= ~EDGE_FACTOR_MASK;
760 edge |= ((u8)value & 0x0f);
762 return ov965x_write(ov965x->client, REG_EDGE, edge);
765 static int ov965x_set_exposure(struct ov965x *ov965x, int exp)
767 struct i2c_client *client = ov965x->client;
768 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
769 bool auto_exposure = (exp == V4L2_EXPOSURE_AUTO);
773 if (ctrls->auto_exp->is_new) {
774 ret = ov965x_read(client, REG_COM8, ®);
778 reg |= (COM8_AEC | COM8_AGC);
780 reg &= ~(COM8_AEC | COM8_AGC);
781 ret = ov965x_write(client, REG_COM8, reg);
786 if (!auto_exposure && ctrls->exposure->is_new) {
787 unsigned int exposure = (ctrls->exposure->val * 100)
788 / ov965x->exp_row_interval;
790 * Manual exposure value
791 * [b15:b0] - AECHM (b15:b10), AECH (b9:b2), COM1 (b1:b0)
793 ret = ov965x_write(client, REG_COM1, exposure & 0x3);
795 ret = ov965x_write(client, REG_AECH,
796 (exposure >> 2) & 0xff);
798 ret = ov965x_write(client, REG_AECHM,
799 (exposure >> 10) & 0x3f);
800 /* Update the value to minimize rounding errors */
801 ctrls->exposure->val = ((exposure * ov965x->exp_row_interval)
807 v4l2_ctrl_activate(ov965x->ctrls.brightness, !exp);
811 static int ov965x_set_flip(struct ov965x *ov965x)
815 if (ov965x->ctrls.hflip->val)
818 if (ov965x->ctrls.vflip->val)
821 return ov965x_write(ov965x->client, REG_MVFP, mvfp);
824 #define NUM_SAT_LEVELS 5
825 #define NUM_SAT_REGS 6
827 static int ov965x_set_saturation(struct ov965x *ov965x, int val)
829 static const u8 regs[NUM_SAT_LEVELS][NUM_SAT_REGS] = {
830 /* MTX(1)...MTX(6) */
831 { 0x1d, 0x1f, 0x02, 0x09, 0x13, 0x1c }, /* -2 */
832 { 0x2e, 0x31, 0x02, 0x0e, 0x1e, 0x2d }, /* -1 */
833 { 0x3a, 0x3d, 0x03, 0x12, 0x26, 0x38 }, /* 0 */
834 { 0x46, 0x49, 0x04, 0x16, 0x2e, 0x43 }, /* +1 */
835 { 0x57, 0x5c, 0x05, 0x1b, 0x39, 0x54 }, /* +2 */
837 u8 addr = REG_MTX(1);
840 val += (NUM_SAT_LEVELS / 2);
841 if (val >= NUM_SAT_LEVELS)
844 for (i = 0; i < NUM_SAT_REGS && !ret; i++)
845 ret = ov965x_write(ov965x->client, addr + i, regs[val][i]);
850 static int ov965x_set_test_pattern(struct ov965x *ov965x, int value)
855 ret = ov965x_read(ov965x->client, REG_COM23, ®);
858 reg = value ? reg | COM23_TEST_MODE : reg & ~COM23_TEST_MODE;
859 return ov965x_write(ov965x->client, REG_COM23, reg);
862 static int __g_volatile_ctrl(struct ov965x *ov965x, struct v4l2_ctrl *ctrl)
864 struct i2c_client *client = ov965x->client;
865 unsigned int exposure, gain, m;
873 case V4L2_CID_AUTOGAIN:
876 ret = ov965x_read(client, REG_GAIN, ®0);
879 ret = ov965x_read(client, REG_VREF, ®1);
882 gain = ((reg1 >> 6) << 8) | reg0;
883 m = 0x01 << fls(gain >> 4);
884 ov965x->ctrls.gain->val = m * (16 + (gain & 0xf));
887 case V4L2_CID_EXPOSURE_AUTO:
888 if (ctrl->val == V4L2_EXPOSURE_MANUAL)
890 ret = ov965x_read(client, REG_COM1, ®0);
892 ret = ov965x_read(client, REG_AECH, ®1);
894 ret = ov965x_read(client, REG_AECHM, ®2);
897 exposure = ((reg2 & 0x3f) << 10) | (reg1 << 2) |
899 ov965x->ctrls.exposure->val = ((exposure *
900 ov965x->exp_row_interval) + 50) / 100;
907 static int ov965x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
909 struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
910 struct ov965x *ov965x = to_ov965x(sd);
913 v4l2_dbg(1, debug, sd, "g_ctrl: %s\n", ctrl->name);
915 mutex_lock(&ov965x->lock);
916 ret = __g_volatile_ctrl(ov965x, ctrl);
917 mutex_unlock(&ov965x->lock);
921 static int ov965x_s_ctrl(struct v4l2_ctrl *ctrl)
923 struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
924 struct ov965x *ov965x = to_ov965x(sd);
927 v4l2_dbg(1, debug, sd, "s_ctrl: %s, value: %d. power: %d\n",
928 ctrl->name, ctrl->val, ov965x->power);
930 mutex_lock(&ov965x->lock);
932 * If the device is not powered up now postpone applying control's
933 * value to the hardware, until it is ready to accept commands.
935 if (ov965x->power == 0) {
936 mutex_unlock(&ov965x->lock);
941 case V4L2_CID_AUTO_WHITE_BALANCE:
942 ret = ov965x_set_white_balance(ov965x, ctrl->val);
945 case V4L2_CID_BRIGHTNESS:
946 ret = ov965x_set_brightness(ov965x, ctrl->val);
949 case V4L2_CID_EXPOSURE_AUTO:
950 ret = ov965x_set_exposure(ov965x, ctrl->val);
953 case V4L2_CID_AUTOGAIN:
954 ret = ov965x_set_gain(ov965x, ctrl->val);
958 ret = ov965x_set_flip(ov965x);
961 case V4L2_CID_POWER_LINE_FREQUENCY:
962 ret = ov965x_set_banding_filter(ov965x, ctrl->val);
965 case V4L2_CID_SATURATION:
966 ret = ov965x_set_saturation(ov965x, ctrl->val);
969 case V4L2_CID_SHARPNESS:
970 ret = ov965x_set_sharpness(ov965x, ctrl->val);
973 case V4L2_CID_TEST_PATTERN:
974 ret = ov965x_set_test_pattern(ov965x, ctrl->val);
978 mutex_unlock(&ov965x->lock);
982 static const struct v4l2_ctrl_ops ov965x_ctrl_ops = {
983 .g_volatile_ctrl = ov965x_g_volatile_ctrl,
984 .s_ctrl = ov965x_s_ctrl,
987 static const char * const test_pattern_menu[] = {
993 static int ov965x_initialize_controls(struct ov965x *ov965x)
995 const struct v4l2_ctrl_ops *ops = &ov965x_ctrl_ops;
996 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
997 struct v4l2_ctrl_handler *hdl = &ctrls->handler;
1000 ret = v4l2_ctrl_handler_init(hdl, 16);
1004 /* Auto/manual white balance */
1005 ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
1006 V4L2_CID_AUTO_WHITE_BALANCE,
1008 ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE,
1010 ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE,
1012 /* Auto/manual exposure */
1013 ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
1014 V4L2_CID_EXPOSURE_AUTO,
1015 V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
1016 /* Exposure time, in 100 us units. min/max is updated dynamically. */
1017 ctrls->exposure = v4l2_ctrl_new_std(hdl, ops,
1018 V4L2_CID_EXPOSURE_ABSOLUTE,
1020 /* Auto/manual gain */
1021 ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
1023 ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
1024 16, 64 * (16 + 15), 1, 64 * 16);
1026 ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION,
1028 ctrls->brightness = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS,
1030 ctrls->sharpness = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS,
1033 ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
1034 ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
1036 ctrls->light_freq = v4l2_ctrl_new_std_menu(hdl, ops,
1037 V4L2_CID_POWER_LINE_FREQUENCY,
1038 V4L2_CID_POWER_LINE_FREQUENCY_60HZ, ~0x7,
1039 V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
1041 v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN,
1042 ARRAY_SIZE(test_pattern_menu) - 1, 0, 0,
1046 v4l2_ctrl_handler_free(hdl);
1050 ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
1051 ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
1053 v4l2_ctrl_auto_cluster(3, &ctrls->auto_wb, 0, false);
1054 v4l2_ctrl_auto_cluster(3, &ctrls->auto_gain, 0, true);
1055 v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 1, true);
1056 v4l2_ctrl_cluster(2, &ctrls->hflip);
1058 ov965x->sd.ctrl_handler = hdl;
1063 * V4L2 subdev video and pad level operations
1065 static void ov965x_get_default_format(struct v4l2_mbus_framefmt *mf)
1067 mf->width = ov965x_framesizes[0].width;
1068 mf->height = ov965x_framesizes[0].height;
1069 mf->colorspace = ov965x_formats[0].colorspace;
1070 mf->code = ov965x_formats[0].code;
1071 mf->field = V4L2_FIELD_NONE;
1074 static int ov965x_enum_mbus_code(struct v4l2_subdev *sd,
1075 struct v4l2_subdev_pad_config *cfg,
1076 struct v4l2_subdev_mbus_code_enum *code)
1078 if (code->index >= ARRAY_SIZE(ov965x_formats))
1081 code->code = ov965x_formats[code->index].code;
1085 static int ov965x_enum_frame_sizes(struct v4l2_subdev *sd,
1086 struct v4l2_subdev_pad_config *cfg,
1087 struct v4l2_subdev_frame_size_enum *fse)
1089 int i = ARRAY_SIZE(ov965x_formats);
1091 if (fse->index >= ARRAY_SIZE(ov965x_framesizes))
1095 if (fse->code == ov965x_formats[i].code)
1098 fse->code = ov965x_formats[i].code;
1100 fse->min_width = ov965x_framesizes[fse->index].width;
1101 fse->max_width = fse->min_width;
1102 fse->max_height = ov965x_framesizes[fse->index].height;
1103 fse->min_height = fse->max_height;
1108 static int ov965x_g_frame_interval(struct v4l2_subdev *sd,
1109 struct v4l2_subdev_frame_interval *fi)
1111 struct ov965x *ov965x = to_ov965x(sd);
1113 mutex_lock(&ov965x->lock);
1114 fi->interval = ov965x->fiv->interval;
1115 mutex_unlock(&ov965x->lock);
1120 static int __ov965x_set_frame_interval(struct ov965x *ov965x,
1121 struct v4l2_subdev_frame_interval *fi)
1123 struct v4l2_mbus_framefmt *mbus_fmt = &ov965x->format;
1124 const struct ov965x_interval *fiv = &ov965x_intervals[0];
1125 u64 req_int, err, min_err = ~0ULL;
1129 if (fi->interval.denominator == 0)
1132 req_int = (u64)(fi->interval.numerator * 10000) /
1133 fi->interval.denominator;
1135 for (i = 0; i < ARRAY_SIZE(ov965x_intervals); i++) {
1136 const struct ov965x_interval *iv = &ov965x_intervals[i];
1138 if (mbus_fmt->width != iv->size.width ||
1139 mbus_fmt->height != iv->size.height)
1141 err = abs((u64)(iv->interval.numerator * 10000) /
1142 iv->interval.denominator - req_int);
1143 if (err < min_err) {
1150 v4l2_dbg(1, debug, &ov965x->sd, "Changed frame interval to %u us\n",
1151 fiv->interval.numerator * 1000000 / fiv->interval.denominator);
1156 static int ov965x_s_frame_interval(struct v4l2_subdev *sd,
1157 struct v4l2_subdev_frame_interval *fi)
1159 struct ov965x *ov965x = to_ov965x(sd);
1162 v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n",
1163 fi->interval.numerator, fi->interval.denominator);
1165 mutex_lock(&ov965x->lock);
1166 ret = __ov965x_set_frame_interval(ov965x, fi);
1167 ov965x->apply_frame_fmt = 1;
1168 mutex_unlock(&ov965x->lock);
1172 static int ov965x_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
1173 struct v4l2_subdev_format *fmt)
1175 struct ov965x *ov965x = to_ov965x(sd);
1176 struct v4l2_mbus_framefmt *mf;
1178 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
1179 mf = v4l2_subdev_get_try_format(sd, cfg, 0);
1184 mutex_lock(&ov965x->lock);
1185 fmt->format = ov965x->format;
1186 mutex_unlock(&ov965x->lock);
1191 static void __ov965x_try_frame_size(struct v4l2_mbus_framefmt *mf,
1192 const struct ov965x_framesize **size)
1194 const struct ov965x_framesize *fsize = &ov965x_framesizes[0],
1196 int i = ARRAY_SIZE(ov965x_framesizes);
1197 unsigned int min_err = UINT_MAX;
1200 int err = abs(fsize->width - mf->width)
1201 + abs(fsize->height - mf->height);
1202 if (err < min_err) {
1209 match = &ov965x_framesizes[0];
1210 mf->width = match->width;
1211 mf->height = match->height;
1216 static int ov965x_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
1217 struct v4l2_subdev_format *fmt)
1219 unsigned int index = ARRAY_SIZE(ov965x_formats);
1220 struct v4l2_mbus_framefmt *mf = &fmt->format;
1221 struct ov965x *ov965x = to_ov965x(sd);
1222 const struct ov965x_framesize *size = NULL;
1225 __ov965x_try_frame_size(mf, &size);
1228 if (ov965x_formats[index].code == mf->code)
1231 mf->colorspace = V4L2_COLORSPACE_JPEG;
1232 mf->code = ov965x_formats[index].code;
1233 mf->field = V4L2_FIELD_NONE;
1235 mutex_lock(&ov965x->lock);
1237 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
1239 mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
1243 if (ov965x->streaming) {
1246 ov965x->frame_size = size;
1247 ov965x->format = fmt->format;
1248 ov965x->tslb_reg = ov965x_formats[index].tslb_reg;
1249 ov965x->apply_frame_fmt = 1;
1253 if (!ret && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
1254 struct v4l2_subdev_frame_interval fiv = {
1255 .interval = { 0, 1 }
1257 /* Reset to minimum possible frame interval */
1258 __ov965x_set_frame_interval(ov965x, &fiv);
1260 mutex_unlock(&ov965x->lock);
1263 ov965x_update_exposure_ctrl(ov965x);
1268 static int ov965x_set_frame_size(struct ov965x *ov965x)
1272 for (i = 0; ret == 0 && i < NUM_FMT_REGS; i++)
1273 ret = ov965x_write(ov965x->client, frame_size_reg_addr[i],
1274 ov965x->frame_size->regs[i]);
1278 static int __ov965x_set_params(struct ov965x *ov965x)
1280 struct i2c_client *client = ov965x->client;
1281 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
1285 if (ov965x->apply_frame_fmt) {
1286 reg = DEF_CLKRC + ov965x->fiv->clkrc_div;
1287 ret = ov965x_write(client, REG_CLKRC, reg);
1290 ret = ov965x_set_frame_size(ov965x);
1293 ret = ov965x_read(client, REG_TSLB, ®);
1296 reg &= ~TSLB_YUYV_MASK;
1297 reg |= ov965x->tslb_reg;
1298 ret = ov965x_write(client, REG_TSLB, reg);
1302 ret = ov965x_set_default_gamma_curve(ov965x);
1305 ret = ov965x_set_color_matrix(ov965x);
1309 * Select manual banding filter, the filter will
1310 * be enabled further if required.
1312 ret = ov965x_read(client, REG_COM11, ®);
1314 reg |= COM11_BANDING;
1315 ret = ov965x_write(client, REG_COM11, reg);
1319 * Banding filter (REG_MBD value) needs to match selected
1320 * resolution and frame rate, so it's always updated here.
1322 return ov965x_set_banding_filter(ov965x, ctrls->light_freq->val);
1325 static int ov965x_s_stream(struct v4l2_subdev *sd, int on)
1327 struct i2c_client *client = v4l2_get_subdevdata(sd);
1328 struct ov965x *ov965x = to_ov965x(sd);
1329 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
1332 v4l2_dbg(1, debug, client, "%s: on: %d\n", __func__, on);
1334 mutex_lock(&ov965x->lock);
1335 if (ov965x->streaming == !on) {
1337 ret = __ov965x_set_params(ov965x);
1339 if (!ret && ctrls->update) {
1341 * ov965x_s_ctrl callback takes the mutex
1342 * so it needs to be released here.
1344 mutex_unlock(&ov965x->lock);
1345 ret = v4l2_ctrl_handler_setup(&ctrls->handler);
1347 mutex_lock(&ov965x->lock);
1352 ret = ov965x_write(client, REG_COM2,
1356 ov965x->streaming += on ? 1 : -1;
1358 WARN_ON(ov965x->streaming < 0);
1359 mutex_unlock(&ov965x->lock);
1365 * V4L2 subdev internal operations
1367 static int ov965x_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
1369 struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(sd, fh->pad, 0);
1371 ov965x_get_default_format(mf);
1375 static const struct v4l2_subdev_pad_ops ov965x_pad_ops = {
1376 .enum_mbus_code = ov965x_enum_mbus_code,
1377 .enum_frame_size = ov965x_enum_frame_sizes,
1378 .get_fmt = ov965x_get_fmt,
1379 .set_fmt = ov965x_set_fmt,
1382 static const struct v4l2_subdev_video_ops ov965x_video_ops = {
1383 .s_stream = ov965x_s_stream,
1384 .g_frame_interval = ov965x_g_frame_interval,
1385 .s_frame_interval = ov965x_s_frame_interval,
1389 static const struct v4l2_subdev_internal_ops ov965x_sd_internal_ops = {
1390 .open = ov965x_open,
1393 static const struct v4l2_subdev_core_ops ov965x_core_ops = {
1394 .s_power = ov965x_s_power,
1395 .log_status = v4l2_ctrl_subdev_log_status,
1396 .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
1397 .unsubscribe_event = v4l2_event_subdev_unsubscribe,
1400 static const struct v4l2_subdev_ops ov965x_subdev_ops = {
1401 .core = &ov965x_core_ops,
1402 .pad = &ov965x_pad_ops,
1403 .video = &ov965x_video_ops,
1407 * Reset and power down GPIOs configuration
1409 static int ov965x_configure_gpios(struct ov965x *ov965x,
1410 const struct ov9650_platform_data *pdata)
1414 ov965x->gpios[GPIO_PWDN] = pdata->gpio_pwdn;
1415 ov965x->gpios[GPIO_RST] = pdata->gpio_reset;
1417 for (i = 0; i < ARRAY_SIZE(ov965x->gpios); i++) {
1418 int gpio = ov965x->gpios[i];
1420 if (!gpio_is_valid(gpio))
1422 ret = devm_gpio_request_one(&ov965x->client->dev, gpio,
1423 GPIOF_OUT_INIT_HIGH, "OV965X");
1426 v4l2_dbg(1, debug, &ov965x->sd, "set gpio %d to 1\n", gpio);
1428 gpio_set_value(gpio, 1);
1429 gpio_export(gpio, 0);
1430 ov965x->gpios[i] = gpio;
1436 static int ov965x_detect_sensor(struct v4l2_subdev *sd)
1438 struct i2c_client *client = v4l2_get_subdevdata(sd);
1439 struct ov965x *ov965x = to_ov965x(sd);
1443 mutex_lock(&ov965x->lock);
1444 __ov965x_set_power(ov965x, 1);
1445 usleep_range(25000, 26000);
1447 /* Check sensor revision */
1448 ret = ov965x_read(client, REG_PID, &pid);
1450 ret = ov965x_read(client, REG_VER, &ver);
1452 __ov965x_set_power(ov965x, 0);
1455 ov965x->id = OV965X_ID(pid, ver);
1456 if (ov965x->id == OV9650_ID || ov965x->id == OV9652_ID) {
1457 v4l2_info(sd, "Found OV%04X sensor\n", ov965x->id);
1459 v4l2_err(sd, "Sensor detection failed (%04X, %d)\n",
1464 mutex_unlock(&ov965x->lock);
1469 static int ov965x_probe(struct i2c_client *client,
1470 const struct i2c_device_id *id)
1472 const struct ov9650_platform_data *pdata = client->dev.platform_data;
1473 struct v4l2_subdev *sd;
1474 struct ov965x *ov965x;
1477 if (pdata == NULL) {
1478 dev_err(&client->dev, "platform data not specified\n");
1482 if (pdata->mclk_frequency == 0) {
1483 dev_err(&client->dev, "MCLK frequency not specified\n");
1487 ov965x = devm_kzalloc(&client->dev, sizeof(*ov965x), GFP_KERNEL);
1491 mutex_init(&ov965x->lock);
1492 ov965x->client = client;
1493 ov965x->mclk_frequency = pdata->mclk_frequency;
1496 v4l2_i2c_subdev_init(sd, client, &ov965x_subdev_ops);
1497 strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name));
1499 sd->internal_ops = &ov965x_sd_internal_ops;
1500 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
1501 V4L2_SUBDEV_FL_HAS_EVENTS;
1503 ret = ov965x_configure_gpios(ov965x, pdata);
1507 ov965x->pad.flags = MEDIA_PAD_FL_SOURCE;
1508 sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
1509 ret = media_entity_init(&sd->entity, 1, &ov965x->pad, 0);
1513 ret = ov965x_initialize_controls(ov965x);
1517 ov965x_get_default_format(&ov965x->format);
1518 ov965x->frame_size = &ov965x_framesizes[0];
1519 ov965x->fiv = &ov965x_intervals[0];
1521 ret = ov965x_detect_sensor(sd);
1525 /* Update exposure time min/max to match frame format */
1526 ov965x_update_exposure_ctrl(ov965x);
1530 v4l2_ctrl_handler_free(sd->ctrl_handler);
1532 media_entity_cleanup(&sd->entity);
1536 static int ov965x_remove(struct i2c_client *client)
1538 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1540 v4l2_device_unregister_subdev(sd);
1541 v4l2_ctrl_handler_free(sd->ctrl_handler);
1542 media_entity_cleanup(&sd->entity);
1547 static const struct i2c_device_id ov965x_id[] = {
1552 MODULE_DEVICE_TABLE(i2c, ov965x_id);
1554 static struct i2c_driver ov965x_i2c_driver = {
1556 .name = DRIVER_NAME,
1558 .probe = ov965x_probe,
1559 .remove = ov965x_remove,
1560 .id_table = ov965x_id,
1563 module_i2c_driver(ov965x_i2c_driver);
1565 MODULE_AUTHOR("Sylwester Nawrocki <sylvester.nawrocki@gmail.com>");
1566 MODULE_DESCRIPTION("OV9650/OV9652 CMOS Image Sensor driver");
1567 MODULE_LICENSE("GPL");