1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
7 * Copyright (C) 2008 Renesas Solutions Corp.
8 * Kuninori Morimoto <morimoto.kuninori@renesas.com>
10 * Based on ov7670 and soc_camera_platform driver,
12 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
13 * Copyright (C) 2008 Magnus Damm
14 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
17 #include <linux/clk.h>
18 #include <linux/delay.h>
19 #include <linux/gpio/consumer.h>
20 #include <linux/i2c.h>
21 #include <linux/init.h>
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/slab.h>
25 #include <linux/v4l2-mediabus.h>
26 #include <linux/videodev2.h>
28 #include <media/i2c/ov772x.h>
30 #include <media/v4l2-ctrls.h>
31 #include <media/v4l2-device.h>
32 #include <media/v4l2-image-sizes.h>
33 #include <media/v4l2-subdev.h>
38 #define GAIN 0x00 /* AGC - Gain control gain setting */
39 #define BLUE 0x01 /* AWB - Blue channel gain setting */
40 #define RED 0x02 /* AWB - Red channel gain setting */
41 #define GREEN 0x03 /* AWB - Green channel gain setting */
42 #define COM1 0x04 /* Common control 1 */
43 #define BAVG 0x05 /* U/B Average Level */
44 #define GAVG 0x06 /* Y/Gb Average Level */
45 #define RAVG 0x07 /* V/R Average Level */
46 #define AECH 0x08 /* Exposure Value - AEC MSBs */
47 #define COM2 0x09 /* Common control 2 */
48 #define PID 0x0A /* Product ID Number MSB */
49 #define VER 0x0B /* Product ID Number LSB */
50 #define COM3 0x0C /* Common control 3 */
51 #define COM4 0x0D /* Common control 4 */
52 #define COM5 0x0E /* Common control 5 */
53 #define COM6 0x0F /* Common control 6 */
54 #define AEC 0x10 /* Exposure Value */
55 #define CLKRC 0x11 /* Internal clock */
56 #define COM7 0x12 /* Common control 7 */
57 #define COM8 0x13 /* Common control 8 */
58 #define COM9 0x14 /* Common control 9 */
59 #define COM10 0x15 /* Common control 10 */
60 #define REG16 0x16 /* Register 16 */
61 #define HSTART 0x17 /* Horizontal sensor size */
62 #define HSIZE 0x18 /* Horizontal frame (HREF column) end high 8-bit */
63 #define VSTART 0x19 /* Vertical frame (row) start high 8-bit */
64 #define VSIZE 0x1A /* Vertical sensor size */
65 #define PSHFT 0x1B /* Data format - pixel delay select */
66 #define MIDH 0x1C /* Manufacturer ID byte - high */
67 #define MIDL 0x1D /* Manufacturer ID byte - low */
68 #define LAEC 0x1F /* Fine AEC value */
69 #define COM11 0x20 /* Common control 11 */
70 #define BDBASE 0x22 /* Banding filter Minimum AEC value */
71 #define DBSTEP 0x23 /* Banding filter Maximum Setp */
72 #define AEW 0x24 /* AGC/AEC - Stable operating region (upper limit) */
73 #define AEB 0x25 /* AGC/AEC - Stable operating region (lower limit) */
74 #define VPT 0x26 /* AGC/AEC Fast mode operating region */
75 #define REG28 0x28 /* Register 28 */
76 #define HOUTSIZE 0x29 /* Horizontal data output size MSBs */
77 #define EXHCH 0x2A /* Dummy pixel insert MSB */
78 #define EXHCL 0x2B /* Dummy pixel insert LSB */
79 #define VOUTSIZE 0x2C /* Vertical data output size MSBs */
80 #define ADVFL 0x2D /* LSB of insert dummy lines in Vertical direction */
81 #define ADVFH 0x2E /* MSG of insert dummy lines in Vertical direction */
82 #define YAVE 0x2F /* Y/G Channel Average value */
83 #define LUMHTH 0x30 /* Histogram AEC/AGC Luminance high level threshold */
84 #define LUMLTH 0x31 /* Histogram AEC/AGC Luminance low level threshold */
85 #define HREF 0x32 /* Image start and size control */
86 #define DM_LNL 0x33 /* Dummy line low 8 bits */
87 #define DM_LNH 0x34 /* Dummy line high 8 bits */
88 #define ADOFF_B 0x35 /* AD offset compensation value for B channel */
89 #define ADOFF_R 0x36 /* AD offset compensation value for R channel */
90 #define ADOFF_GB 0x37 /* AD offset compensation value for Gb channel */
91 #define ADOFF_GR 0x38 /* AD offset compensation value for Gr channel */
92 #define OFF_B 0x39 /* Analog process B channel offset value */
93 #define OFF_R 0x3A /* Analog process R channel offset value */
94 #define OFF_GB 0x3B /* Analog process Gb channel offset value */
95 #define OFF_GR 0x3C /* Analog process Gr channel offset value */
96 #define COM12 0x3D /* Common control 12 */
97 #define COM13 0x3E /* Common control 13 */
98 #define COM14 0x3F /* Common control 14 */
99 #define COM15 0x40 /* Common control 15*/
100 #define COM16 0x41 /* Common control 16 */
101 #define TGT_B 0x42 /* BLC blue channel target value */
102 #define TGT_R 0x43 /* BLC red channel target value */
103 #define TGT_GB 0x44 /* BLC Gb channel target value */
104 #define TGT_GR 0x45 /* BLC Gr channel target value */
106 #define LCC0 0x46 /* Lens correction control 0 */
107 #define LCC1 0x47 /* Lens correction option 1 - X coordinate */
108 #define LCC2 0x48 /* Lens correction option 2 - Y coordinate */
109 #define LCC3 0x49 /* Lens correction option 3 */
110 #define LCC4 0x4A /* Lens correction option 4 - radius of the circular */
111 #define LCC5 0x4B /* Lens correction option 5 */
112 #define LCC6 0x4C /* Lens correction option 6 */
114 #define LC_CTR 0x46 /* Lens correction control */
115 #define LC_XC 0x47 /* X coordinate of lens correction center relative */
116 #define LC_YC 0x48 /* Y coordinate of lens correction center relative */
117 #define LC_COEF 0x49 /* Lens correction coefficient */
118 #define LC_RADI 0x4A /* Lens correction radius */
119 #define LC_COEFB 0x4B /* Lens B channel compensation coefficient */
120 #define LC_COEFR 0x4C /* Lens R channel compensation coefficient */
122 #define FIXGAIN 0x4D /* Analog fix gain amplifer */
123 #define AREF0 0x4E /* Sensor reference control */
124 #define AREF1 0x4F /* Sensor reference current control */
125 #define AREF2 0x50 /* Analog reference control */
126 #define AREF3 0x51 /* ADC reference control */
127 #define AREF4 0x52 /* ADC reference control */
128 #define AREF5 0x53 /* ADC reference control */
129 #define AREF6 0x54 /* Analog reference control */
130 #define AREF7 0x55 /* Analog reference control */
131 #define UFIX 0x60 /* U channel fixed value output */
132 #define VFIX 0x61 /* V channel fixed value output */
133 #define AWBB_BLK 0x62 /* AWB option for advanced AWB */
134 #define AWB_CTRL0 0x63 /* AWB control byte 0 */
135 #define DSP_CTRL1 0x64 /* DSP control byte 1 */
136 #define DSP_CTRL2 0x65 /* DSP control byte 2 */
137 #define DSP_CTRL3 0x66 /* DSP control byte 3 */
138 #define DSP_CTRL4 0x67 /* DSP control byte 4 */
139 #define AWB_BIAS 0x68 /* AWB BLC level clip */
140 #define AWB_CTRL1 0x69 /* AWB control 1 */
141 #define AWB_CTRL2 0x6A /* AWB control 2 */
142 #define AWB_CTRL3 0x6B /* AWB control 3 */
143 #define AWB_CTRL4 0x6C /* AWB control 4 */
144 #define AWB_CTRL5 0x6D /* AWB control 5 */
145 #define AWB_CTRL6 0x6E /* AWB control 6 */
146 #define AWB_CTRL7 0x6F /* AWB control 7 */
147 #define AWB_CTRL8 0x70 /* AWB control 8 */
148 #define AWB_CTRL9 0x71 /* AWB control 9 */
149 #define AWB_CTRL10 0x72 /* AWB control 10 */
150 #define AWB_CTRL11 0x73 /* AWB control 11 */
151 #define AWB_CTRL12 0x74 /* AWB control 12 */
152 #define AWB_CTRL13 0x75 /* AWB control 13 */
153 #define AWB_CTRL14 0x76 /* AWB control 14 */
154 #define AWB_CTRL15 0x77 /* AWB control 15 */
155 #define AWB_CTRL16 0x78 /* AWB control 16 */
156 #define AWB_CTRL17 0x79 /* AWB control 17 */
157 #define AWB_CTRL18 0x7A /* AWB control 18 */
158 #define AWB_CTRL19 0x7B /* AWB control 19 */
159 #define AWB_CTRL20 0x7C /* AWB control 20 */
160 #define AWB_CTRL21 0x7D /* AWB control 21 */
161 #define GAM1 0x7E /* Gamma Curve 1st segment input end point */
162 #define GAM2 0x7F /* Gamma Curve 2nd segment input end point */
163 #define GAM3 0x80 /* Gamma Curve 3rd segment input end point */
164 #define GAM4 0x81 /* Gamma Curve 4th segment input end point */
165 #define GAM5 0x82 /* Gamma Curve 5th segment input end point */
166 #define GAM6 0x83 /* Gamma Curve 6th segment input end point */
167 #define GAM7 0x84 /* Gamma Curve 7th segment input end point */
168 #define GAM8 0x85 /* Gamma Curve 8th segment input end point */
169 #define GAM9 0x86 /* Gamma Curve 9th segment input end point */
170 #define GAM10 0x87 /* Gamma Curve 10th segment input end point */
171 #define GAM11 0x88 /* Gamma Curve 11th segment input end point */
172 #define GAM12 0x89 /* Gamma Curve 12th segment input end point */
173 #define GAM13 0x8A /* Gamma Curve 13th segment input end point */
174 #define GAM14 0x8B /* Gamma Curve 14th segment input end point */
175 #define GAM15 0x8C /* Gamma Curve 15th segment input end point */
176 #define SLOP 0x8D /* Gamma curve highest segment slope */
177 #define DNSTH 0x8E /* De-noise threshold */
178 #define EDGE_STRNGT 0x8F /* Edge strength control when manual mode */
179 #define EDGE_TRSHLD 0x90 /* Edge threshold control when manual mode */
180 #define DNSOFF 0x91 /* Auto De-noise threshold control */
181 #define EDGE_UPPER 0x92 /* Edge strength upper limit when Auto mode */
182 #define EDGE_LOWER 0x93 /* Edge strength lower limit when Auto mode */
183 #define MTX1 0x94 /* Matrix coefficient 1 */
184 #define MTX2 0x95 /* Matrix coefficient 2 */
185 #define MTX3 0x96 /* Matrix coefficient 3 */
186 #define MTX4 0x97 /* Matrix coefficient 4 */
187 #define MTX5 0x98 /* Matrix coefficient 5 */
188 #define MTX6 0x99 /* Matrix coefficient 6 */
189 #define MTX_CTRL 0x9A /* Matrix control */
190 #define BRIGHT 0x9B /* Brightness control */
191 #define CNTRST 0x9C /* Contrast contrast */
192 #define CNTRST_CTRL 0x9D /* Contrast contrast center */
193 #define UVAD_J0 0x9E /* Auto UV adjust contrast 0 */
194 #define UVAD_J1 0x9F /* Auto UV adjust contrast 1 */
195 #define SCAL0 0xA0 /* Scaling control 0 */
196 #define SCAL1 0xA1 /* Scaling control 1 */
197 #define SCAL2 0xA2 /* Scaling control 2 */
198 #define FIFODLYM 0xA3 /* FIFO manual mode delay control */
199 #define FIFODLYA 0xA4 /* FIFO auto mode delay control */
200 #define SDE 0xA6 /* Special digital effect control */
201 #define USAT 0xA7 /* U component saturation control */
202 #define VSAT 0xA8 /* V component saturation control */
204 #define HUE0 0xA9 /* Hue control 0 */
205 #define HUE1 0xAA /* Hue control 1 */
207 #define HUECOS 0xA9 /* Cosine value */
208 #define HUESIN 0xAA /* Sine value */
210 #define SIGN 0xAB /* Sign bit for Hue and contrast */
211 #define DSPAUTO 0xAC /* DSP auto function ON/OFF control */
218 #define SOFT_SLEEP_MODE 0x10 /* Soft sleep mode */
219 /* Output drive capability */
220 #define OCAP_1x 0x00 /* 1x */
221 #define OCAP_2x 0x01 /* 2x */
222 #define OCAP_3x 0x02 /* 3x */
223 #define OCAP_4x 0x03 /* 4x */
226 #define SWAP_MASK (SWAP_RGB | SWAP_YUV | SWAP_ML)
227 #define IMG_MASK (VFLIP_IMG | HFLIP_IMG)
229 #define VFLIP_IMG 0x80 /* Vertical flip image ON/OFF selection */
230 #define HFLIP_IMG 0x40 /* Horizontal mirror image ON/OFF selection */
231 #define SWAP_RGB 0x20 /* Swap B/R output sequence in RGB mode */
232 #define SWAP_YUV 0x10 /* Swap Y/UV output sequence in YUV mode */
233 #define SWAP_ML 0x08 /* Swap output MSB/LSB */
234 /* Tri-state option for output clock */
235 #define NOTRI_CLOCK 0x04 /* 0: Tri-state at this period */
236 /* 1: No tri-state at this period */
237 /* Tri-state option for output data */
238 #define NOTRI_DATA 0x02 /* 0: Tri-state at this period */
239 /* 1: No tri-state at this period */
240 #define SCOLOR_TEST 0x01 /* Sensor color bar test pattern */
243 /* PLL frequency control */
244 #define PLL_BYPASS 0x00 /* 00: Bypass PLL */
245 #define PLL_4x 0x40 /* 01: PLL 4x */
246 #define PLL_6x 0x80 /* 10: PLL 6x */
247 #define PLL_8x 0xc0 /* 11: PLL 8x */
248 /* AEC evaluate window */
249 #define AEC_FULL 0x00 /* 00: Full window */
250 #define AEC_1p2 0x10 /* 01: 1/2 window */
251 #define AEC_1p4 0x20 /* 10: 1/4 window */
252 #define AEC_2p3 0x30 /* 11: Low 2/3 window */
253 #define COM4_RESERVED 0x01 /* Reserved bit */
256 #define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */
257 #define AFR_SPPED 0x40 /* Auto frame rate control speed selection */
258 /* Auto frame rate max rate control */
259 #define AFR_NO_RATE 0x00 /* No reduction of frame rate */
260 #define AFR_1p2 0x10 /* Max reduction to 1/2 frame rate */
261 #define AFR_1p4 0x20 /* Max reduction to 1/4 frame rate */
262 #define AFR_1p8 0x30 /* Max reduction to 1/8 frame rate */
263 /* Auto frame rate active point control */
264 #define AF_2x 0x00 /* Add frame when AGC reaches 2x gain */
265 #define AF_4x 0x04 /* Add frame when AGC reaches 4x gain */
266 #define AF_8x 0x08 /* Add frame when AGC reaches 8x gain */
267 #define AF_16x 0x0c /* Add frame when AGC reaches 16x gain */
268 /* AEC max step control */
269 #define AEC_NO_LIMIT 0x01 /* 0 : AEC incease step has limit */
270 /* 1 : No limit to AEC increase step */
272 /* Input clock divider register */
273 #define CLKRC_RESERVED 0x80 /* Reserved bit */
274 #define CLKRC_DIV(n) ((n) - 1)
277 /* SCCB Register Reset */
278 #define SCCB_RESET 0x80 /* 0 : No change */
279 /* 1 : Resets all registers to default */
280 /* Resolution selection */
281 #define SLCT_MASK 0x40 /* Mask of VGA or QVGA */
282 #define SLCT_VGA 0x00 /* 0 : VGA */
283 #define SLCT_QVGA 0x40 /* 1 : QVGA */
284 #define ITU656_ON_OFF 0x20 /* ITU656 protocol ON/OFF selection */
285 #define SENSOR_RAW 0x10 /* Sensor RAW */
286 /* RGB output format control */
287 #define FMT_MASK 0x0c /* Mask of color format */
288 #define FMT_GBR422 0x00 /* 00 : GBR 4:2:2 */
289 #define FMT_RGB565 0x04 /* 01 : RGB 565 */
290 #define FMT_RGB555 0x08 /* 10 : RGB 555 */
291 #define FMT_RGB444 0x0c /* 11 : RGB 444 */
292 /* Output format control */
293 #define OFMT_MASK 0x03 /* Mask of output format */
294 #define OFMT_YUV 0x00 /* 00 : YUV */
295 #define OFMT_P_BRAW 0x01 /* 01 : Processed Bayer RAW */
296 #define OFMT_RGB 0x02 /* 10 : RGB */
297 #define OFMT_BRAW 0x03 /* 11 : Bayer RAW */
300 #define FAST_ALGO 0x80 /* Enable fast AGC/AEC algorithm */
301 /* AEC Setp size limit */
302 #define UNLMT_STEP 0x40 /* 0 : Step size is limited */
303 /* 1 : Unlimited step size */
304 #define BNDF_ON_OFF 0x20 /* Banding filter ON/OFF */
305 #define AEC_BND 0x10 /* Enable AEC below banding value */
306 #define AEC_ON_OFF 0x08 /* Fine AEC ON/OFF control */
307 #define AGC_ON 0x04 /* AGC Enable */
308 #define AWB_ON 0x02 /* AWB Enable */
309 #define AEC_ON 0x01 /* AEC Enable */
312 #define BASE_AECAGC 0x80 /* Histogram or average based AEC/AGC */
313 /* Automatic gain ceiling - maximum AGC value */
314 #define GAIN_2x 0x00 /* 000 : 2x */
315 #define GAIN_4x 0x10 /* 001 : 4x */
316 #define GAIN_8x 0x20 /* 010 : 8x */
317 #define GAIN_16x 0x30 /* 011 : 16x */
318 #define GAIN_32x 0x40 /* 100 : 32x */
319 #define GAIN_64x 0x50 /* 101 : 64x */
320 #define GAIN_128x 0x60 /* 110 : 128x */
321 #define DROP_VSYNC 0x04 /* Drop VSYNC output of corrupt frame */
322 #define DROP_HREF 0x02 /* Drop HREF output of corrupt frame */
325 #define SGLF_ON_OFF 0x02 /* Single frame ON/OFF selection */
326 #define SGLF_TRIG 0x01 /* Single frame transfer trigger */
329 #define HREF_VSTART_SHIFT 6 /* VSTART LSB */
330 #define HREF_HSTART_SHIFT 4 /* HSTART 2 LSBs */
331 #define HREF_VSIZE_SHIFT 2 /* VSIZE LSB */
332 #define HREF_HSIZE_SHIFT 0 /* HSIZE 2 LSBs */
335 #define EXHCH_VSIZE_SHIFT 2 /* VOUTSIZE LSB */
336 #define EXHCH_HSIZE_SHIFT 0 /* HOUTSIZE 2 LSBs */
339 #define FIFO_ON 0x80 /* FIFO enable/disable selection */
340 #define UV_ON_OFF 0x40 /* UV adjust function ON/OFF selection */
341 #define YUV444_2_422 0x20 /* YUV444 to 422 UV channel option selection */
342 #define CLR_MTRX_ON_OFF 0x10 /* Color matrix ON/OFF selection */
343 #define INTPLT_ON_OFF 0x08 /* Interpolation ON/OFF selection */
344 #define GMM_ON_OFF 0x04 /* Gamma function ON/OFF selection */
345 #define AUTO_BLK_ON_OFF 0x02 /* Black defect auto correction ON/OFF */
346 #define AUTO_WHT_ON_OFF 0x01 /* White define auto correction ON/OFF */
349 #define UV_MASK 0x80 /* UV output sequence option */
350 #define UV_ON 0x80 /* ON */
351 #define UV_OFF 0x00 /* OFF */
352 #define CBAR_MASK 0x20 /* DSP Color bar mask */
353 #define CBAR_ON 0x20 /* ON */
354 #define CBAR_OFF 0x00 /* OFF */
357 #define DSP_OFMT_YUV 0x00
358 #define DSP_OFMT_RGB 0x00
359 #define DSP_OFMT_RAW8 0x02
360 #define DSP_OFMT_RAW10 0x03
362 /* DSPAUTO (DSP Auto Function ON/OFF Control) */
363 #define AWB_ACTRL 0x80 /* AWB auto threshold control */
364 #define DENOISE_ACTRL 0x40 /* De-noise auto threshold control */
365 #define EDGE_ACTRL 0x20 /* Edge enhancement auto strength control */
366 #define UV_ACTRL 0x10 /* UV adjust auto slope control */
367 #define SCAL0_ACTRL 0x08 /* Auto scaling factor control */
368 #define SCAL1_2_ACTRL 0x04 /* Auto scaling factor control */
370 #define OV772X_MAX_WIDTH VGA_WIDTH
371 #define OV772X_MAX_HEIGHT VGA_HEIGHT
376 #define OV7720 0x7720
377 #define OV7725 0x7721
378 #define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF))
397 struct ov772x_color_format {
399 enum v4l2_colorspace colorspace;
406 struct ov772x_win_size {
408 unsigned char com7_bit;
409 unsigned int sizeimage;
410 struct v4l2_rect rect;
414 struct v4l2_subdev subdev;
415 struct v4l2_ctrl_handler hdl;
417 struct ov772x_camera_info *info;
418 struct gpio_desc *pwdn_gpio;
419 struct gpio_desc *rstb_gpio;
420 const struct ov772x_color_format *cfmt;
421 const struct ov772x_win_size *win;
422 struct v4l2_ctrl *vflip_ctrl;
423 struct v4l2_ctrl *hflip_ctrl;
424 /* band_filter = COM8[5] ? 256 - BDBASE : 0 */
425 struct v4l2_ctrl *band_filter_ctrl;
427 /* lock to protect power_count and streaming */
431 #ifdef CONFIG_MEDIA_CONTROLLER
432 struct media_pad pad;
437 * supported color format list
439 static const struct ov772x_color_format ov772x_cfmts[] = {
441 .code = MEDIA_BUS_FMT_YUYV8_2X8,
442 .colorspace = V4L2_COLORSPACE_SRGB,
444 .dsp4 = DSP_OFMT_YUV,
449 .code = MEDIA_BUS_FMT_YVYU8_2X8,
450 .colorspace = V4L2_COLORSPACE_SRGB,
452 .dsp4 = DSP_OFMT_YUV,
457 .code = MEDIA_BUS_FMT_UYVY8_2X8,
458 .colorspace = V4L2_COLORSPACE_SRGB,
460 .dsp4 = DSP_OFMT_YUV,
465 .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
466 .colorspace = V4L2_COLORSPACE_SRGB,
468 .dsp4 = DSP_OFMT_YUV,
470 .com7 = FMT_RGB555 | OFMT_RGB,
473 .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
474 .colorspace = V4L2_COLORSPACE_SRGB,
476 .dsp4 = DSP_OFMT_YUV,
478 .com7 = FMT_RGB555 | OFMT_RGB,
481 .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
482 .colorspace = V4L2_COLORSPACE_SRGB,
484 .dsp4 = DSP_OFMT_YUV,
486 .com7 = FMT_RGB565 | OFMT_RGB,
489 .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
490 .colorspace = V4L2_COLORSPACE_SRGB,
492 .dsp4 = DSP_OFMT_YUV,
494 .com7 = FMT_RGB565 | OFMT_RGB,
497 /* Setting DSP4 to DSP_OFMT_RAW8 still gives 10-bit output,
498 * regardless of the COM7 value. We can thus only support 10-bit
499 * Bayer until someone figures it out.
501 .code = MEDIA_BUS_FMT_SBGGR10_1X10,
502 .colorspace = V4L2_COLORSPACE_SRGB,
504 .dsp4 = DSP_OFMT_RAW10,
506 .com7 = SENSOR_RAW | OFMT_BRAW,
514 static const struct ov772x_win_size ov772x_win_sizes[] = {
517 .com7_bit = SLCT_VGA,
518 .sizeimage = 510 * 748,
523 .height = VGA_HEIGHT,
527 .com7_bit = SLCT_QVGA,
528 .sizeimage = 278 * 576,
533 .height = QVGA_HEIGHT,
539 * frame rate settings lists
541 static const unsigned int ov772x_frame_intervals[] = { 5, 10, 15, 20, 30, 60 };
547 static struct ov772x_priv *to_ov772x(struct v4l2_subdev *sd)
549 return container_of(sd, struct ov772x_priv, subdev);
552 static int ov772x_read(struct i2c_client *client, u8 addr)
557 ret = i2c_master_send(client, &addr, 1);
560 ret = i2c_master_recv(client, &val, 1);
567 static inline int ov772x_write(struct i2c_client *client, u8 addr, u8 value)
569 return i2c_smbus_write_byte_data(client, addr, value);
572 static int ov772x_mask_set(struct i2c_client *client, u8 command, u8 mask,
575 s32 val = ov772x_read(client, command);
583 return ov772x_write(client, command, val);
586 static int ov772x_reset(struct i2c_client *client)
590 ret = ov772x_write(client, COM7, SCCB_RESET);
594 usleep_range(1000, 5000);
596 return ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
603 static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
605 struct i2c_client *client = v4l2_get_subdevdata(sd);
606 struct ov772x_priv *priv = to_ov772x(sd);
609 mutex_lock(&priv->lock);
611 if (priv->streaming == enable)
614 ret = ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE,
615 enable ? 0 : SOFT_SLEEP_MODE);
620 dev_dbg(&client->dev, "format %d, win %s\n",
621 priv->cfmt->code, priv->win->name);
623 priv->streaming = enable;
626 mutex_unlock(&priv->lock);
631 static unsigned int ov772x_select_fps(struct ov772x_priv *priv,
632 struct v4l2_fract *tpf)
634 unsigned int fps = tpf->numerator ?
635 tpf->denominator / tpf->numerator :
637 unsigned int best_diff;
642 /* Approximate to the closest supported frame interval. */
644 for (i = 0, idx = 0; i < ARRAY_SIZE(ov772x_frame_intervals); i++) {
645 diff = abs(fps - ov772x_frame_intervals[i]);
646 if (diff < best_diff) {
652 return ov772x_frame_intervals[idx];
655 static int ov772x_set_frame_rate(struct ov772x_priv *priv,
657 const struct ov772x_color_format *cfmt,
658 const struct ov772x_win_size *win)
660 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
661 unsigned long fin = clk_get_rate(priv->clk);
662 unsigned int best_diff;
671 /* Use image size (with blankings) to calculate desired pixel clock. */
672 switch (cfmt->com7 & OFMT_MASK) {
674 fsize = win->sizeimage;
679 fsize = win->sizeimage * 2;
686 * Pixel clock generation circuit is pretty simple:
688 * Fin -> [ / CLKRC_div] -> [ * PLL_mult] -> pclk
690 * Try to approximate the desired pixel clock testing all available
691 * PLL multipliers (1x, 4x, 6x, 8x) and calculate corresponding
694 * div = PLL_mult * Fin / pclk
696 * and re-calculate the pixel clock using it:
698 * pclk = Fin * PLL_mult / CLKRC_div
700 * Choose the PLL_mult and CLKRC_div pair that gives a pixel clock
701 * closer to the desired one.
703 * The desired pixel clock is calculated using a known frame size
704 * (blanking included) and FPS.
707 for (i = 0; i < ARRAY_SIZE(ov772x_pll); i++) {
708 unsigned int pll_mult = ov772x_pll[i].mult;
709 unsigned int pll_out = pll_mult * fin;
716 div = DIV_ROUND_CLOSEST(pll_out, pclk);
717 t_pclk = DIV_ROUND_CLOSEST(fin * pll_mult, div);
718 diff = abs(pclk - t_pclk);
719 if (diff < best_diff) {
721 clkrc = CLKRC_DIV(div);
722 com4 = ov772x_pll[i].com4;
726 ret = ov772x_write(client, COM4, com4 | COM4_RESERVED);
730 ret = ov772x_write(client, CLKRC, clkrc | CLKRC_RESERVED);
737 static int ov772x_g_frame_interval(struct v4l2_subdev *sd,
738 struct v4l2_subdev_frame_interval *ival)
740 struct ov772x_priv *priv = to_ov772x(sd);
741 struct v4l2_fract *tpf = &ival->interval;
744 tpf->denominator = priv->fps;
749 static int ov772x_s_frame_interval(struct v4l2_subdev *sd,
750 struct v4l2_subdev_frame_interval *ival)
752 struct ov772x_priv *priv = to_ov772x(sd);
753 struct v4l2_fract *tpf = &ival->interval;
757 mutex_lock(&priv->lock);
759 if (priv->streaming) {
764 fps = ov772x_select_fps(priv, tpf);
767 * If the device is not powered up by the host driver do
768 * not apply any changes to H/W at this time. Instead
769 * the frame rate will be restored right after power-up.
771 if (priv->power_count > 0) {
772 ret = ov772x_set_frame_rate(priv, fps, priv->cfmt, priv->win);
778 tpf->denominator = fps;
782 mutex_unlock(&priv->lock);
787 static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
789 struct ov772x_priv *priv = container_of(ctrl->handler,
790 struct ov772x_priv, hdl);
791 struct v4l2_subdev *sd = &priv->subdev;
792 struct i2c_client *client = v4l2_get_subdevdata(sd);
796 /* v4l2_ctrl_lock() locks our own mutex */
799 * If the device is not powered up by the host driver do
800 * not apply any controls to H/W at this time. Instead
801 * the controls will be restored right after power-up.
803 if (priv->power_count == 0)
808 val = ctrl->val ? VFLIP_IMG : 0x00;
809 if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP))
811 return ov772x_mask_set(client, COM3, VFLIP_IMG, val);
813 val = ctrl->val ? HFLIP_IMG : 0x00;
814 if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP))
816 return ov772x_mask_set(client, COM3, HFLIP_IMG, val);
817 case V4L2_CID_BAND_STOP_FILTER:
819 /* Switch the filter off, it is on now */
820 ret = ov772x_mask_set(client, BDBASE, 0xff, 0xff);
822 ret = ov772x_mask_set(client, COM8,
825 /* Switch the filter on, set AEC low limit */
826 val = 256 - ctrl->val;
827 ret = ov772x_mask_set(client, COM8,
828 BNDF_ON_OFF, BNDF_ON_OFF);
830 ret = ov772x_mask_set(client, BDBASE,
840 #ifdef CONFIG_VIDEO_ADV_DEBUG
841 static int ov772x_g_register(struct v4l2_subdev *sd,
842 struct v4l2_dbg_register *reg)
844 struct i2c_client *client = v4l2_get_subdevdata(sd);
851 ret = ov772x_read(client, reg->reg);
855 reg->val = (__u64)ret;
860 static int ov772x_s_register(struct v4l2_subdev *sd,
861 const struct v4l2_dbg_register *reg)
863 struct i2c_client *client = v4l2_get_subdevdata(sd);
865 if (reg->reg > 0xff ||
869 return ov772x_write(client, reg->reg, reg->val);
873 static int ov772x_power_on(struct ov772x_priv *priv)
875 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
879 ret = clk_prepare_enable(priv->clk);
884 if (priv->pwdn_gpio) {
885 gpiod_set_value(priv->pwdn_gpio, 1);
886 usleep_range(500, 1000);
890 * FIXME: The reset signal is connected to a shared GPIO on some
891 * platforms (namely the SuperH Migo-R). Until a framework becomes
892 * available to handle this cleanly, request the GPIO temporarily
893 * to avoid conflicts.
895 priv->rstb_gpio = gpiod_get_optional(&client->dev, "reset",
897 if (IS_ERR(priv->rstb_gpio)) {
898 dev_info(&client->dev, "Unable to get GPIO \"reset\"");
899 clk_disable_unprepare(priv->clk);
900 return PTR_ERR(priv->rstb_gpio);
903 if (priv->rstb_gpio) {
904 gpiod_set_value(priv->rstb_gpio, 1);
905 usleep_range(500, 1000);
906 gpiod_set_value(priv->rstb_gpio, 0);
907 usleep_range(500, 1000);
909 gpiod_put(priv->rstb_gpio);
915 static int ov772x_power_off(struct ov772x_priv *priv)
917 clk_disable_unprepare(priv->clk);
919 if (priv->pwdn_gpio) {
920 gpiod_set_value(priv->pwdn_gpio, 0);
921 usleep_range(500, 1000);
927 static int ov772x_set_params(struct ov772x_priv *priv,
928 const struct ov772x_color_format *cfmt,
929 const struct ov772x_win_size *win);
931 static int ov772x_s_power(struct v4l2_subdev *sd, int on)
933 struct ov772x_priv *priv = to_ov772x(sd);
936 mutex_lock(&priv->lock);
938 /* If the power count is modified from 0 to != 0 or from != 0 to 0,
939 * update the power state.
941 if (priv->power_count == !on) {
943 ret = ov772x_power_on(priv);
945 * Restore the format, the frame rate, and
949 ret = ov772x_set_params(priv, priv->cfmt,
952 ret = ov772x_power_off(priv);
957 /* Update the power count. */
958 priv->power_count += on ? 1 : -1;
959 WARN(priv->power_count < 0, "Unbalanced power count\n");
960 WARN(priv->power_count > 1, "Duplicated s_power call\n");
963 mutex_unlock(&priv->lock);
968 static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
970 const struct ov772x_win_size *win = &ov772x_win_sizes[0];
971 u32 best_diff = UINT_MAX;
974 for (i = 0; i < ARRAY_SIZE(ov772x_win_sizes); ++i) {
975 u32 diff = abs(width - ov772x_win_sizes[i].rect.width)
976 + abs(height - ov772x_win_sizes[i].rect.height);
977 if (diff < best_diff) {
979 win = &ov772x_win_sizes[i];
986 static void ov772x_select_params(const struct v4l2_mbus_framefmt *mf,
987 const struct ov772x_color_format **cfmt,
988 const struct ov772x_win_size **win)
992 /* Select a format. */
993 *cfmt = &ov772x_cfmts[0];
995 for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) {
996 if (mf->code == ov772x_cfmts[i].code) {
997 *cfmt = &ov772x_cfmts[i];
1002 /* Select a window size. */
1003 *win = ov772x_select_win(mf->width, mf->height);
1006 static int ov772x_edgectrl(struct ov772x_priv *priv)
1008 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
1014 if (priv->info->edgectrl.strength & OV772X_MANUAL_EDGE_CTRL) {
1016 * Manual Edge Control Mode.
1018 * Edge auto strength bit is set by default.
1019 * Remove it when manual mode.
1022 ret = ov772x_mask_set(client, DSPAUTO, EDGE_ACTRL, 0x00);
1026 ret = ov772x_mask_set(client,
1027 EDGE_TRSHLD, OV772X_EDGE_THRESHOLD_MASK,
1028 priv->info->edgectrl.threshold);
1032 ret = ov772x_mask_set(client,
1033 EDGE_STRNGT, OV772X_EDGE_STRENGTH_MASK,
1034 priv->info->edgectrl.strength);
1038 } else if (priv->info->edgectrl.upper > priv->info->edgectrl.lower) {
1040 * Auto Edge Control Mode.
1042 * Set upper and lower limit.
1044 ret = ov772x_mask_set(client,
1045 EDGE_UPPER, OV772X_EDGE_UPPER_MASK,
1046 priv->info->edgectrl.upper);
1050 ret = ov772x_mask_set(client,
1051 EDGE_LOWER, OV772X_EDGE_LOWER_MASK,
1052 priv->info->edgectrl.lower);
1060 static int ov772x_set_params(struct ov772x_priv *priv,
1061 const struct ov772x_color_format *cfmt,
1062 const struct ov772x_win_size *win)
1064 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
1068 /* Reset hardware. */
1069 ov772x_reset(client);
1072 ret = ov772x_edgectrl(priv);
1076 /* Format and window size. */
1077 ret = ov772x_write(client, HSTART, win->rect.left >> 2);
1079 goto ov772x_set_fmt_error;
1080 ret = ov772x_write(client, HSIZE, win->rect.width >> 2);
1082 goto ov772x_set_fmt_error;
1083 ret = ov772x_write(client, VSTART, win->rect.top >> 1);
1085 goto ov772x_set_fmt_error;
1086 ret = ov772x_write(client, VSIZE, win->rect.height >> 1);
1088 goto ov772x_set_fmt_error;
1089 ret = ov772x_write(client, HOUTSIZE, win->rect.width >> 2);
1091 goto ov772x_set_fmt_error;
1092 ret = ov772x_write(client, VOUTSIZE, win->rect.height >> 1);
1094 goto ov772x_set_fmt_error;
1095 ret = ov772x_write(client, HREF,
1096 ((win->rect.top & 1) << HREF_VSTART_SHIFT) |
1097 ((win->rect.left & 3) << HREF_HSTART_SHIFT) |
1098 ((win->rect.height & 1) << HREF_VSIZE_SHIFT) |
1099 ((win->rect.width & 3) << HREF_HSIZE_SHIFT));
1101 goto ov772x_set_fmt_error;
1102 ret = ov772x_write(client, EXHCH,
1103 ((win->rect.height & 1) << EXHCH_VSIZE_SHIFT) |
1104 ((win->rect.width & 3) << EXHCH_HSIZE_SHIFT));
1106 goto ov772x_set_fmt_error;
1108 /* Set DSP_CTRL3. */
1111 ret = ov772x_mask_set(client,
1112 DSP_CTRL3, UV_MASK, val);
1114 goto ov772x_set_fmt_error;
1117 /* DSP_CTRL4: AEC reference point and DSP output format. */
1119 ret = ov772x_write(client, DSP_CTRL4, cfmt->dsp4);
1121 goto ov772x_set_fmt_error;
1126 if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP))
1128 if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP))
1130 if (priv->vflip_ctrl->val)
1132 if (priv->hflip_ctrl->val)
1135 ret = ov772x_mask_set(client,
1136 COM3, SWAP_MASK | IMG_MASK, val);
1138 goto ov772x_set_fmt_error;
1140 /* COM7: Sensor resolution and output format control. */
1141 ret = ov772x_write(client, COM7, win->com7_bit | cfmt->com7);
1143 goto ov772x_set_fmt_error;
1145 /* COM4, CLKRC: Set pixel clock and framerate. */
1146 ret = ov772x_set_frame_rate(priv, priv->fps, cfmt, win);
1148 goto ov772x_set_fmt_error;
1151 if (priv->band_filter_ctrl->val) {
1152 unsigned short band_filter = priv->band_filter_ctrl->val;
1154 ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF);
1156 ret = ov772x_mask_set(client, BDBASE,
1157 0xff, 256 - band_filter);
1159 goto ov772x_set_fmt_error;
1164 ov772x_set_fmt_error:
1166 ov772x_reset(client);
1171 static int ov772x_get_selection(struct v4l2_subdev *sd,
1172 struct v4l2_subdev_pad_config *cfg,
1173 struct v4l2_subdev_selection *sel)
1175 struct ov772x_priv *priv = to_ov772x(sd);
1177 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
1182 switch (sel->target) {
1183 case V4L2_SEL_TGT_CROP_BOUNDS:
1184 case V4L2_SEL_TGT_CROP_DEFAULT:
1185 case V4L2_SEL_TGT_CROP:
1186 sel->r.width = priv->win->rect.width;
1187 sel->r.height = priv->win->rect.height;
1194 static int ov772x_get_fmt(struct v4l2_subdev *sd,
1195 struct v4l2_subdev_pad_config *cfg,
1196 struct v4l2_subdev_format *format)
1198 struct v4l2_mbus_framefmt *mf = &format->format;
1199 struct ov772x_priv *priv = to_ov772x(sd);
1204 mf->width = priv->win->rect.width;
1205 mf->height = priv->win->rect.height;
1206 mf->code = priv->cfmt->code;
1207 mf->colorspace = priv->cfmt->colorspace;
1208 mf->field = V4L2_FIELD_NONE;
1213 static int ov772x_set_fmt(struct v4l2_subdev *sd,
1214 struct v4l2_subdev_pad_config *cfg,
1215 struct v4l2_subdev_format *format)
1217 struct ov772x_priv *priv = to_ov772x(sd);
1218 struct v4l2_mbus_framefmt *mf = &format->format;
1219 const struct ov772x_color_format *cfmt;
1220 const struct ov772x_win_size *win;
1226 ov772x_select_params(mf, &cfmt, &win);
1228 mf->code = cfmt->code;
1229 mf->width = win->rect.width;
1230 mf->height = win->rect.height;
1231 mf->field = V4L2_FIELD_NONE;
1232 mf->colorspace = cfmt->colorspace;
1233 mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
1234 mf->quantization = V4L2_QUANTIZATION_DEFAULT;
1235 mf->xfer_func = V4L2_XFER_FUNC_DEFAULT;
1237 if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
1242 mutex_lock(&priv->lock);
1244 if (priv->streaming) {
1250 * If the device is not powered up by the host driver do
1251 * not apply any changes to H/W at this time. Instead
1252 * the format will be restored right after power-up.
1254 if (priv->power_count > 0) {
1255 ret = ov772x_set_params(priv, cfmt, win);
1263 mutex_unlock(&priv->lock);
1268 static int ov772x_video_probe(struct ov772x_priv *priv)
1270 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
1271 int pid, ver, midh, midl;
1272 const char *devname;
1275 ret = ov772x_power_on(priv);
1279 /* Check and show product ID and manufacturer ID. */
1280 pid = ov772x_read(client, PID);
1283 ver = ov772x_read(client, VER);
1287 switch (VERSION(pid, ver)) {
1295 dev_err(&client->dev,
1296 "Product ID error %x:%x\n", pid, ver);
1301 midh = ov772x_read(client, MIDH);
1304 midl = ov772x_read(client, MIDL);
1308 dev_info(&client->dev,
1309 "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
1310 devname, pid, ver, midh, midl);
1312 ret = v4l2_ctrl_handler_setup(&priv->hdl);
1315 ov772x_power_off(priv);
1320 static const struct v4l2_ctrl_ops ov772x_ctrl_ops = {
1321 .s_ctrl = ov772x_s_ctrl,
1324 static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
1325 #ifdef CONFIG_VIDEO_ADV_DEBUG
1326 .g_register = ov772x_g_register,
1327 .s_register = ov772x_s_register,
1329 .s_power = ov772x_s_power,
1332 static int ov772x_enum_frame_interval(struct v4l2_subdev *sd,
1333 struct v4l2_subdev_pad_config *cfg,
1334 struct v4l2_subdev_frame_interval_enum *fie)
1336 if (fie->pad || fie->index >= ARRAY_SIZE(ov772x_frame_intervals))
1339 if (fie->width != VGA_WIDTH && fie->width != QVGA_WIDTH)
1341 if (fie->height != VGA_HEIGHT && fie->height != QVGA_HEIGHT)
1344 fie->interval.numerator = 1;
1345 fie->interval.denominator = ov772x_frame_intervals[fie->index];
1350 static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
1351 struct v4l2_subdev_pad_config *cfg,
1352 struct v4l2_subdev_mbus_code_enum *code)
1354 if (code->pad || code->index >= ARRAY_SIZE(ov772x_cfmts))
1357 code->code = ov772x_cfmts[code->index].code;
1362 static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
1363 .s_stream = ov772x_s_stream,
1364 .s_frame_interval = ov772x_s_frame_interval,
1365 .g_frame_interval = ov772x_g_frame_interval,
1368 static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
1369 .enum_frame_interval = ov772x_enum_frame_interval,
1370 .enum_mbus_code = ov772x_enum_mbus_code,
1371 .get_selection = ov772x_get_selection,
1372 .get_fmt = ov772x_get_fmt,
1373 .set_fmt = ov772x_set_fmt,
1376 static const struct v4l2_subdev_ops ov772x_subdev_ops = {
1377 .core = &ov772x_subdev_core_ops,
1378 .video = &ov772x_subdev_video_ops,
1379 .pad = &ov772x_subdev_pad_ops,
1383 * i2c_driver function
1386 static int ov772x_probe(struct i2c_client *client,
1387 const struct i2c_device_id *did)
1389 struct ov772x_priv *priv;
1390 struct i2c_adapter *adapter = client->adapter;
1393 if (!client->dev.of_node && !client->dev.platform_data) {
1394 dev_err(&client->dev,
1395 "Missing ov772x platform data for non-DT device\n");
1399 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1400 dev_err(&adapter->dev,
1401 "I2C-Adapter doesn't support SMBUS_BYTE_DATA\n");
1405 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
1409 priv->info = client->dev.platform_data;
1410 mutex_init(&priv->lock);
1412 v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
1413 priv->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1414 v4l2_ctrl_handler_init(&priv->hdl, 3);
1415 /* Use our mutex for the controls */
1416 priv->hdl.lock = &priv->lock;
1417 priv->vflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
1418 V4L2_CID_VFLIP, 0, 1, 1, 0);
1419 priv->hflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
1420 V4L2_CID_HFLIP, 0, 1, 1, 0);
1421 priv->band_filter_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
1422 V4L2_CID_BAND_STOP_FILTER,
1424 priv->subdev.ctrl_handler = &priv->hdl;
1425 if (priv->hdl.error) {
1426 ret = priv->hdl.error;
1427 goto error_ctrl_free;
1430 priv->clk = clk_get(&client->dev, NULL);
1431 if (IS_ERR(priv->clk)) {
1432 dev_err(&client->dev, "Unable to get xclk clock\n");
1433 ret = PTR_ERR(priv->clk);
1434 goto error_ctrl_free;
1437 priv->pwdn_gpio = gpiod_get_optional(&client->dev, "powerdown",
1439 if (IS_ERR(priv->pwdn_gpio)) {
1440 dev_info(&client->dev, "Unable to get GPIO \"powerdown\"");
1441 ret = PTR_ERR(priv->pwdn_gpio);
1445 ret = ov772x_video_probe(priv);
1447 goto error_gpio_put;
1449 #ifdef CONFIG_MEDIA_CONTROLLER
1450 priv->pad.flags = MEDIA_PAD_FL_SOURCE;
1451 priv->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
1452 ret = media_entity_pads_init(&priv->subdev.entity, 1, &priv->pad);
1454 goto error_gpio_put;
1457 priv->cfmt = &ov772x_cfmts[0];
1458 priv->win = &ov772x_win_sizes[0];
1461 ret = v4l2_async_register_subdev(&priv->subdev);
1463 goto error_entity_cleanup;
1467 error_entity_cleanup:
1468 media_entity_cleanup(&priv->subdev.entity);
1470 if (priv->pwdn_gpio)
1471 gpiod_put(priv->pwdn_gpio);
1475 v4l2_ctrl_handler_free(&priv->hdl);
1476 mutex_destroy(&priv->lock);
1481 static int ov772x_remove(struct i2c_client *client)
1483 struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client));
1485 media_entity_cleanup(&priv->subdev.entity);
1487 if (priv->pwdn_gpio)
1488 gpiod_put(priv->pwdn_gpio);
1489 v4l2_async_unregister_subdev(&priv->subdev);
1490 v4l2_ctrl_handler_free(&priv->hdl);
1491 mutex_destroy(&priv->lock);
1496 static const struct i2c_device_id ov772x_id[] = {
1500 MODULE_DEVICE_TABLE(i2c, ov772x_id);
1502 static const struct of_device_id ov772x_of_match[] = {
1503 { .compatible = "ovti,ov7725", },
1504 { .compatible = "ovti,ov7720", },
1507 MODULE_DEVICE_TABLE(of, ov772x_of_match);
1509 static struct i2c_driver ov772x_i2c_driver = {
1512 .of_match_table = ov772x_of_match,
1514 .probe = ov772x_probe,
1515 .remove = ov772x_remove,
1516 .id_table = ov772x_id,
1519 module_i2c_driver(ov772x_i2c_driver);
1521 MODULE_DESCRIPTION("V4L2 driver for OV772x image sensor");
1522 MODULE_AUTHOR("Kuninori Morimoto");
1523 MODULE_LICENSE("GPL v2");