3 Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc.
6 Redistribution and use in source and binary forms, with or without
7 modification, are permitted provided that the following conditions are met:
9 * Redistributions of source code must retain the above copyright notice,
10 this list of conditions and the following disclaimer.
11 * Redistributions in binary form must reproduce the above copyright notice,
12 this list of conditions and the following disclaimer in the documentation
13 and/or other materials provided with the distribution.
14 * Neither the name of Trident Microsystems nor Hauppauge Computer Works
15 nor the names of its contributors may be used to endorse or promote
16 products derived from this software without specific prior written
19 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
20 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
23 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 POSSIBILITY OF SUCH DAMAGE.
31 DRXJ specific header file
33 Authors: Dragan Savic, Milos Nikolic, Mihajlo Katona, Tao Ding, Paul Janssen
38 /*-------------------------------------------------------------------------
40 -------------------------------------------------------------------------*/
42 #include "drx_driver.h"
43 #include "drx_dap_fasi.h"
45 /* Check DRX-J specific dap condition */
46 /* Multi master mode and short addr format only will not work.
47 RMW, CRC reset, broadcast and switching back to single master mode
48 cannot be done with short addr only in multi master mode. */
49 #if ((DRXDAP_SINGLE_MASTER == 0) && (DRXDAPFASI_LONG_ADDR_ALLOWED == 0))
50 #error "Multi master mode and short addressing only is an illegal combination"
51 *; /* Generate a fatal compiler error to make sure it stops here,
52 this is necessary because not all compilers stop after a #error. */
55 /*-------------------------------------------------------------------------
57 -------------------------------------------------------------------------*/
58 /*============================================================================*/
59 /*============================================================================*/
60 /*== code support ============================================================*/
61 /*============================================================================*/
62 /*============================================================================*/
64 /*============================================================================*/
65 /*============================================================================*/
66 /*== SCU cmd if =============================================================*/
67 /*============================================================================*/
68 /*============================================================================*/
74 /*< Data length in byte */
76 /*< result length in byte */
78 /*< General purpose param */
80 /*< General purpose param */};
82 /*============================================================================*/
83 /*============================================================================*/
84 /*== CTRL CFG related data structures ========================================*/
85 /*============================================================================*/
86 /*============================================================================*/
88 /* extra intermediate lock state for VSB,QAM,NTSC */
89 #define DRXJ_DEMOD_LOCK (DRX_LOCK_STATE_1)
92 #define DRXJ_OOB_AGC_LOCK (DRX_LOCK_STATE_1) /* analog gain control lock */
93 #define DRXJ_OOB_SYNC_LOCK (DRX_LOCK_STATE_2) /* digital gain control lock */
95 /* Intermediate powermodes for DRXJ */
96 #define DRXJ_POWER_DOWN_MAIN_PATH DRX_POWER_MODE_8
97 #define DRXJ_POWER_DOWN_CORE DRX_POWER_MODE_9
98 #define DRXJ_POWER_DOWN_PLL DRX_POWER_MODE_10
100 /* supstition for GPIO FNC mux */
101 #define APP_O (0x0000)
103 /*#define DRX_CTRL_BASE (0x0000)*/
105 #define DRXJ_CTRL_CFG_BASE (0x1000)
107 DRXJ_CFG_AGC_RF = DRXJ_CTRL_CFG_BASE,
109 DRXJ_CFG_AGC_INTERNAL,
112 DRXJ_CFG_SYMBOL_CLK_OFFSET,
113 DRXJ_CFG_ACCUM_CR_RS_CW_ERR,
114 DRXJ_CFG_FEC_MERS_SEQ_COUNT,
117 DRXJ_CFG_OOB_PRE_SAW,
119 DRXJ_CFG_RESET_PACKET_ERR,
122 DRXJ_CFG_ATV_OUTPUT, /* also for FM (SIF control) but not likely */
124 DRXJ_CFG_ATV_EQU_COEF,
125 DRXJ_CFG_ATV_AGC_STATUS, /* also for FM ( IF,RF, audioAGC ) */
127 DRXJ_CFG_MPEG_OUTPUT_MISC,
131 DRXJ_CFG_MAX /* dummy, never to be used */};
134 * /enum drxj_cfg_smart_ant_io * smart antenna i/o.
136 enum drxj_cfg_smart_ant_io {
137 DRXJ_SMT_ANT_OUTPUT = 0,
142 * /struct drxj_cfg_smart_ant * Set smart antenna.
144 struct drxj_cfg_smart_ant {
145 enum drxj_cfg_smart_ant_io io;
150 * /struct DRXJAGCSTATUS_t
151 * AGC status information from the DRXJ-IQM-AF.
153 struct drxj_agc_status {
159 /* DRXJ_CFG_AGC_RF, DRXJ_CFG_AGC_IF */
162 * /enum drxj_agc_ctrl_mode * Available AGCs modes in the DRXJ.
164 enum drxj_agc_ctrl_mode {
165 DRX_AGC_CTRL_AUTO = 0,
170 * /struct drxj_cfg_agc * Generic interface for all AGCs present on the DRXJ.
172 struct drxj_cfg_agc {
173 enum drx_standard standard; /* standard for which these settings apply */
174 enum drxj_agc_ctrl_mode ctrl_mode; /* off, user, auto */
175 u16 output_level; /* range dependent on AGC */
176 u16 min_output_level; /* range dependent on AGC */
177 u16 max_output_level; /* range dependent on AGC */
178 u16 speed; /* range dependent on AGC */
179 u16 top; /* rf-agc take over point */
180 u16 cut_off_current; /* rf-agc is accelerated if output current
181 is below cut-off current */};
183 /* DRXJ_CFG_PRE_SAW */
186 * /struct drxj_cfg_pre_saw * Interface to configure pre SAW sense.
188 struct drxj_cfg_pre_saw {
189 enum drx_standard standard; /* standard to which these settings apply */
190 u16 reference; /* pre SAW reference value, range 0 .. 31 */
191 bool use_pre_saw; /* true algorithms must use pre SAW sense */};
193 /* DRXJ_CFG_AFE_GAIN */
196 * /struct drxj_cfg_afe_gain * Interface to configure gain of AFE (LNA + PGA).
198 struct drxj_cfg_afe_gain {
199 enum drx_standard standard; /* standard to which these settings apply */
200 u16 gain; /* gain in 0.1 dB steps, DRXJ range 140 .. 335 */};
203 * /struct drxjrs_errors
204 * Available failure information in DRXJ_FEC_RS.
206 * Container for errors that are received in the most recently finished measurement period
209 struct drxjrs_errors {
211 /*< no of pre RS bit errors */
212 u16 nr_symbol_errors;
213 /*< no of pre RS symbol errors */
214 u16 nr_packet_errors;
215 /*< no of pre RS packet errors */
217 /*< no of post RS failures to decode */
218 u16 nr_snc_par_fail_count;
219 /*< no of post RS bit erros */
223 * /struct drxj_cfg_vsb_misc * symbol error rate
225 struct drxj_cfg_vsb_misc {
227 /*< symbol error rate sps */};
230 * /enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
233 enum drxj_mpeg_start_width {
234 DRXJ_MPEG_START_WIDTH_1CLKCYC,
235 DRXJ_MPEG_START_WIDTH_8CLKCYC};
238 * /enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
241 enum drxj_mpeg_output_clock_rate {
242 DRXJ_MPEGOUTPUT_CLOCK_RATE_AUTO,
243 DRXJ_MPEGOUTPUT_CLOCK_RATE_75973K,
244 DRXJ_MPEGOUTPUT_CLOCK_RATE_50625K,
245 DRXJ_MPEGOUTPUT_CLOCK_RATE_37968K,
246 DRXJ_MPEGOUTPUT_CLOCK_RATE_30375K,
247 DRXJ_MPEGOUTPUT_CLOCK_RATE_25313K,
248 DRXJ_MPEGOUTPUT_CLOCK_RATE_21696K};
251 * /struct DRXJCfgMisc_t
252 * Change TEI bit of MPEG output
253 * reverse MPEG output bit order
254 * set MPEG output clock rate
256 struct drxj_cfg_mpeg_output_misc {
257 bool disable_tei_handling; /*< if true pass (not change) TEI bit */
258 bool bit_reverse_mpeg_outout; /*< if true, parallel: msb on MD0; serial: lsb out first */
259 enum drxj_mpeg_output_clock_rate mpeg_output_clock_rate;
260 /*< set MPEG output clock rate that overwirtes the derived one from symbol rate */
261 enum drxj_mpeg_start_width mpeg_start_width; /*< set MPEG output start width */};
264 * /enum drxj_xtal_freq * Supported external crystal reference frequency.
266 enum drxj_xtal_freq {
268 DRXJ_XTAL_FREQ_27MHZ,
269 DRXJ_XTAL_FREQ_20P25MHZ,
270 DRXJ_XTAL_FREQ_4MHZ};
273 * /enum drxj_xtal_freq * Supported external crystal reference frequency.
276 DRXJ_I2C_SPEED_400KBPS,
277 DRXJ_I2C_SPEED_100KBPS};
280 * /struct drxj_cfg_hw_cfg * Get hw configuration, such as crystal
281 * reference frequency, I2C speed, etc...
283 struct drxj_cfg_hw_cfg {
284 enum drxj_xtal_freq xtal_freq;
285 /*< crystal reference frequency */
286 enum drxji2c_speed i2c_speed;
287 /*< 100 or 400 kbps */};
292 struct drxj_cfg_atv_misc {
293 s16 peak_filter; /* -8 .. 15 */
294 u16 noise_filter; /* 0 .. 15 */};
297 * struct drxj_cfg_oob_misc */
298 #define DRXJ_OOB_STATE_RESET 0x0
299 #define DRXJ_OOB_STATE_AGN_HUNT 0x1
300 #define DRXJ_OOB_STATE_DGN_HUNT 0x2
301 #define DRXJ_OOB_STATE_AGC_HUNT 0x3
302 #define DRXJ_OOB_STATE_FRQ_HUNT 0x4
303 #define DRXJ_OOB_STATE_PHA_HUNT 0x8
304 #define DRXJ_OOB_STATE_TIM_HUNT 0x10
305 #define DRXJ_OOB_STATE_EQU_HUNT 0x20
306 #define DRXJ_OOB_STATE_EQT_HUNT 0x30
307 #define DRXJ_OOB_STATE_SYNC 0x40
309 struct drxj_cfg_oob_misc {
310 struct drxj_agc_status agc;
312 bool sym_timing_lock;
321 * Index of in array of coef
323 enum drxj_cfg_oob_lo_power {
324 DRXJ_OOB_LO_POW_MINUS0DB = 0,
325 DRXJ_OOB_LO_POW_MINUS5DB,
326 DRXJ_OOB_LO_POW_MINUS10DB,
327 DRXJ_OOB_LO_POW_MINUS15DB,
328 DRXJ_OOB_LO_POW_MAX};
331 * DRXJ_CFG_ATV_EQU_COEF
333 struct drxj_cfg_atv_equ_coef {
334 s16 coef0; /* -256 .. 255 */
335 s16 coef1; /* -256 .. 255 */
336 s16 coef2; /* -256 .. 255 */
337 s16 coef3; /* -256 .. 255 */};
340 * Index of in array of coef
342 enum drxj_coef_array_index {
343 DRXJ_COEF_IDX_MN = 0,
353 * DRXJ_CFG_ATV_OUTPUT
357 * /enum DRXJAttenuation_t
358 * Attenuation setting for SIF AGC.
361 enum drxjsif_attenuation {
362 DRXJ_SIF_ATTENUATION_0DB,
363 DRXJ_SIF_ATTENUATION_3DB,
364 DRXJ_SIF_ATTENUATION_6DB,
365 DRXJ_SIF_ATTENUATION_9DB};
368 * /struct drxj_cfg_atv_output * SIF attenuation setting.
371 struct drxj_cfg_atv_output {
372 bool enable_cvbs_output; /* true= enabled */
373 bool enable_sif_output; /* true= enabled */
374 enum drxjsif_attenuation sif_attenuation;
378 DRXJ_CFG_ATV_AGC_STATUS (get only)
380 /* TODO : AFE interface not yet finished, subject to change */
381 struct drxj_cfg_atv_agc_status {
382 u16 rf_agc_gain; /* 0 .. 877 uA */
383 u16 if_agc_gain; /* 0 .. 877 uA */
384 s16 video_agc_gain; /* -75 .. 1972 in 0.1 dB steps */
385 s16 audio_agc_gain; /* -4 .. 1020 in 0.1 dB steps */
386 u16 rf_agc_loop_gain; /* 0 .. 7 */
387 u16 if_agc_loop_gain; /* 0 .. 7 */
388 u16 video_agc_loop_gain; /* 0 .. 7 */};
390 /*============================================================================*/
391 /*============================================================================*/
392 /*== CTRL related data structures ============================================*/
393 /*============================================================================*/
394 /*============================================================================*/
398 /*============================================================================*/
399 /*============================================================================*/
401 /*========================================*/
403 * /struct struct drxj_data * DRXJ specific attributes.
405 * Global data container for DRXJ specific data.
409 /* device capabilities (determined during drx_open()) */
410 bool has_lna; /*< true if LNA (aka PGA) present */
411 bool has_oob; /*< true if OOB supported */
412 bool has_ntsc; /*< true if NTSC supported */
413 bool has_btsc; /*< true if BTSC supported */
414 bool has_smatx; /*< true if mat_tx is available */
415 bool has_smarx; /*< true if mat_rx is available */
416 bool has_gpio; /*< true if GPIO is available */
417 bool has_irqn; /*< true if IRQN is available */
419 u8 mfx; /*< metal fix */
422 bool mirror_freq_spect_oob;/*< tuner inversion (true = tuner mirrors the signal */
424 /* standard/channel settings */
425 enum drx_standard standard; /*< current standard information */
426 enum drx_modulation constellation;
427 /*< current constellation */
428 s32 frequency; /*< center signal frequency in KHz */
429 enum drx_bandwidth curr_bandwidth;
430 /*< current channel bandwidth */
431 enum drx_mirror mirror; /*< current channel mirror */
433 /* signal quality information */
434 u32 fec_bits_desired; /*< BER accounting period */
435 u16 fec_vd_plen; /*< no of trellis symbols: VD SER measurement period */
436 u16 qam_vd_prescale; /*< Viterbi Measurement Prescale */
437 u16 qam_vd_period; /*< Viterbi Measurement period */
438 u16 fec_rs_plen; /*< defines RS BER measurement period */
439 u16 fec_rs_prescale; /*< ReedSolomon Measurement Prescale */
440 u16 fec_rs_period; /*< ReedSolomon Measurement period */
441 bool reset_pkt_err_acc; /*< Set a flag to reset accumulated packet error */
442 u16 pkt_err_acc_start; /*< Set a flag to reset accumulated packet error */
444 /* HI configuration */
445 u16 hi_cfg_timing_div; /*< HI Configure() parameter 2 */
446 u16 hi_cfg_bridge_delay; /*< HI Configure() parameter 3 */
447 u16 hi_cfg_wake_up_key; /*< HI Configure() parameter 4 */
448 u16 hi_cfg_ctrl; /*< HI Configure() parameter 5 */
449 u16 hi_cfg_transmit; /*< HI Configure() parameter 6 */
451 /* UIO configuration */
452 enum drxuio_mode uio_sma_rx_mode;/*< current mode of SmaRx pin */
453 enum drxuio_mode uio_sma_tx_mode;/*< current mode of SmaTx pin */
454 enum drxuio_mode uio_gpio_mode; /*< current mode of ASEL pin */
455 enum drxuio_mode uio_irqn_mode; /*< current mode of IRQN pin */
457 /* IQM fs frequency shift and inversion */
458 u32 iqm_fs_rate_ofs; /*< frequency shifter setting after setchannel */
459 bool pos_image; /*< True: positive image */
460 /* IQM RC frequency shift */
461 u32 iqm_rc_rate_ofs; /*< frequency shifter setting after setchannel */
463 /* ATV configuration */
464 u32 atv_cfg_changed_flags; /*< flag: flags cfg changes */
465 s16 atv_top_equ0[DRXJ_COEF_IDX_MAX]; /*< shadow of ATV_TOP_EQU0__A */
466 s16 atv_top_equ1[DRXJ_COEF_IDX_MAX]; /*< shadow of ATV_TOP_EQU1__A */
467 s16 atv_top_equ2[DRXJ_COEF_IDX_MAX]; /*< shadow of ATV_TOP_EQU2__A */
468 s16 atv_top_equ3[DRXJ_COEF_IDX_MAX]; /*< shadow of ATV_TOP_EQU3__A */
469 bool phase_correction_bypass;/*< flag: true=bypass */
470 s16 atv_top_vid_peak; /*< shadow of ATV_TOP_VID_PEAK__A */
471 u16 atv_top_noise_th; /*< shadow of ATV_TOP_NOISE_TH__A */
472 bool enable_cvbs_output; /*< flag CVBS output enable */
473 bool enable_sif_output; /*< flag SIF output enable */
474 enum drxjsif_attenuation sif_attenuation;
475 /*< current SIF att setting */
476 /* Agc configuration for QAM and VSB */
477 struct drxj_cfg_agc qam_rf_agc_cfg; /*< qam RF AGC config */
478 struct drxj_cfg_agc qam_if_agc_cfg; /*< qam IF AGC config */
479 struct drxj_cfg_agc vsb_rf_agc_cfg; /*< vsb RF AGC config */
480 struct drxj_cfg_agc vsb_if_agc_cfg; /*< vsb IF AGC config */
482 /* PGA gain configuration for QAM and VSB */
483 u16 qam_pga_cfg; /*< qam PGA config */
484 u16 vsb_pga_cfg; /*< vsb PGA config */
486 /* Pre SAW configuration for QAM and VSB */
487 struct drxj_cfg_pre_saw qam_pre_saw_cfg;
488 /*< qam pre SAW config */
489 struct drxj_cfg_pre_saw vsb_pre_saw_cfg;
490 /*< qam pre SAW config */
492 /* Version information */
493 char v_text[2][12]; /*< allocated text versions */
494 struct drx_version v_version[2]; /*< allocated versions structs */
495 struct drx_version_list v_list_elements[2];
496 /*< allocated version list */
498 /* smart antenna configuration */
499 bool smart_ant_inverted;
501 /* Tracking filter setting for OOB */
502 u16 oob_trk_filter_cfg[8];
505 /* MPEG static bitrate setting */
506 u32 mpeg_ts_static_bitrate; /*< bitrate static MPEG output */
507 bool disable_te_ihandling; /*< MPEG TS TEI handling */
508 bool bit_reverse_mpeg_outout;/*< MPEG output bit order */
509 enum drxj_mpeg_output_clock_rate mpeg_output_clock_rate;
510 /*< MPEG output clock rate */
511 enum drxj_mpeg_start_width mpeg_start_width;
512 /*< MPEG Start width */
514 /* Pre SAW & Agc configuration for ATV */
515 struct drxj_cfg_pre_saw atv_pre_saw_cfg;
516 /*< atv pre SAW config */
517 struct drxj_cfg_agc atv_rf_agc_cfg; /*< atv RF AGC config */
518 struct drxj_cfg_agc atv_if_agc_cfg; /*< atv IF AGC config */
519 u16 atv_pga_cfg; /*< atv pga config */
521 u32 curr_symbol_rate;
524 bool pdr_safe_mode; /*< PDR safe mode activated */
525 u16 pdr_safe_restore_val_gpio;
526 u16 pdr_safe_restore_val_v_sync;
527 u16 pdr_safe_restore_val_sma_rx;
528 u16 pdr_safe_restore_val_sma_tx;
530 /* OOB pre-saw value */
532 enum drxj_cfg_oob_lo_power oob_lo_pow;
534 struct drx_aud_data aud_data;
535 /*< audio storage */};
537 /*-------------------------------------------------------------------------
539 -------------------------------------------------------------------------*/
541 * \brief Compilable references to attributes
542 * \param d pointer to demod instance
544 * Used as main reference to an attribute field.
545 * Can be used by both macro implementation and function implementation.
546 * These macros are defined to avoid duplication of code in macro and function
547 * definitions that handle access of demod common or extended attributes.
551 #define DRXJ_ATTR_BTSC_DETECT(d) \
552 (((struct drxj_data *)(d)->my_ext_attr)->aud_data.btsc_detect)
554 /*-------------------------------------------------------------------------
556 -------------------------------------------------------------------------*/
559 * \def DRXJ_NTSC_CARRIER_FREQ_OFFSET
560 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
563 * NTSC channels are listed by their picture carrier frequency (Fpc).
564 * The function DRX_CTRL_SET_CHANNEL requires the centre frequency as input.
565 * In case the tuner module is not used the DRX-J requires that the tuner is
566 * tuned to the centre frequency of the channel:
568 * Fcentre = Fpc + DRXJ_NTSC_CARRIER_FREQ_OFFSET
571 #define DRXJ_NTSC_CARRIER_FREQ_OFFSET ((s32)(1750))
574 * \def DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET
575 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
577 * For PAL/SECAM - BG standard. This define is needed in case the tuner module
578 * is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc).
579 * The DRX-J requires that the tuner is tuned to:
580 * Fpc + DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET
582 * In case the tuner module is used the drxdriver takes care of this.
583 * In case the tuner module is NOT used the application programmer must take
587 #define DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET ((s32)(2375))
590 * \def DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET
591 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
593 * For PAL/SECAM - DK, I, L standards. This define is needed in case the tuner module
594 * is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc).
595 * The DRX-J requires that the tuner is tuned to:
596 * Fpc + DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET
598 * In case the tuner module is used the drxdriver takes care of this.
599 * In case the tuner module is NOT used the application programmer must take
603 #define DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET ((s32)(2775))
606 * \def DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET
607 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
609 * For PAL/SECAM - LP standard. This define is needed in case the tuner module
610 * is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc).
611 * The DRX-J requires that the tuner is tuned to:
612 * Fpc + DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET
614 * In case the tuner module is used the drxdriver takes care of this.
615 * In case the tuner module is NOT used the application programmer must take
618 #define DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET ((s32)(-3255))
621 * \def DRXJ_FM_CARRIER_FREQ_OFFSET
622 * \brief Offset from sound carrier to centre frequency in kHz, in RF domain
625 * FM channels are listed by their sound carrier frequency (Fsc).
626 * The function DRX_CTRL_SET_CHANNEL requires the Ffm frequency (see below) as
628 * In case the tuner module is not used the DRX-J requires that the tuner is
629 * tuned to the Ffm frequency of the channel.
631 * Ffm = Fsc + DRXJ_FM_CARRIER_FREQ_OFFSET
634 #define DRXJ_FM_CARRIER_FREQ_OFFSET ((s32)(-3000))
636 /* Revision types -------------------------------------------------------*/
638 #define DRXJ_TYPE_ID (0x3946000DUL)
640 /* Macros ---------------------------------------------------------------*/
642 /* Convert OOB lock status to string */
643 #define DRXJ_STR_OOB_LOCKSTATUS(x) ( \
644 (x == DRX_NEVER_LOCK) ? "Never" : \
645 (x == DRX_NOT_LOCKED) ? "No" : \
646 (x == DRX_LOCKED) ? "Locked" : \
647 (x == DRX_LOCK_STATE_1) ? "AGC lock" : \
648 (x == DRX_LOCK_STATE_2) ? "sync lock" : \
651 #endif /* __DRXJ_H__ */