1 // SPDX-License-Identifier: GPL-2.0-only
3 * cec-adap.c - HDMI Consumer Electronics Control framework - CEC adapter
5 * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
8 #include <linux/errno.h>
9 #include <linux/init.h>
10 #include <linux/module.h>
11 #include <linux/kernel.h>
12 #include <linux/kmod.h>
13 #include <linux/ktime.h>
14 #include <linux/slab.h>
16 #include <linux/string.h>
17 #include <linux/types.h>
19 #include <drm/drm_connector.h>
20 #include <drm/drm_device.h>
21 #include <drm/drm_edid.h>
22 #include <drm/drm_file.h>
26 static void cec_fill_msg_report_features(struct cec_adapter *adap,
30 static int cec_log_addr2idx(const struct cec_adapter *adap, u8 log_addr)
34 for (i = 0; i < adap->log_addrs.num_log_addrs; i++)
35 if (adap->log_addrs.log_addr[i] == log_addr)
40 static unsigned int cec_log_addr2dev(const struct cec_adapter *adap, u8 log_addr)
42 int i = cec_log_addr2idx(adap, log_addr);
44 return adap->log_addrs.primary_device_type[i < 0 ? 0 : i];
47 u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
50 unsigned int loc = cec_get_edid_spa_location(edid, size);
55 return CEC_PHYS_ADDR_INVALID;
56 return (edid[loc] << 8) | edid[loc + 1];
58 EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr);
60 void cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info,
61 const struct drm_connector *connector)
63 memset(conn_info, 0, sizeof(*conn_info));
64 conn_info->type = CEC_CONNECTOR_TYPE_DRM;
65 conn_info->drm.card_no = connector->dev->primary->index;
66 conn_info->drm.connector_id = connector->base.id;
68 EXPORT_SYMBOL_GPL(cec_fill_conn_info_from_drm);
71 * Queue a new event for this filehandle. If ts == 0, then set it
72 * to the current time.
74 * We keep a queue of at most max_event events where max_event differs
75 * per event. If the queue becomes full, then drop the oldest event and
76 * keep track of how many events we've dropped.
78 void cec_queue_event_fh(struct cec_fh *fh,
79 const struct cec_event *new_ev, u64 ts)
81 static const u16 max_events[CEC_NUM_EVENTS] = {
82 1, 1, 800, 800, 8, 8, 8, 8
84 struct cec_event_entry *entry;
85 unsigned int ev_idx = new_ev->event - 1;
87 if (WARN_ON(ev_idx >= ARRAY_SIZE(fh->events)))
93 mutex_lock(&fh->lock);
94 if (ev_idx < CEC_NUM_CORE_EVENTS)
95 entry = &fh->core_events[ev_idx];
97 entry = kmalloc(sizeof(*entry), GFP_KERNEL);
99 if (new_ev->event == CEC_EVENT_LOST_MSGS &&
100 fh->queued_events[ev_idx]) {
101 entry->ev.lost_msgs.lost_msgs +=
102 new_ev->lost_msgs.lost_msgs;
108 if (fh->queued_events[ev_idx] < max_events[ev_idx]) {
109 /* Add new msg at the end of the queue */
110 list_add_tail(&entry->list, &fh->events[ev_idx]);
111 fh->queued_events[ev_idx]++;
112 fh->total_queued_events++;
116 if (ev_idx >= CEC_NUM_CORE_EVENTS) {
117 list_add_tail(&entry->list, &fh->events[ev_idx]);
118 /* drop the oldest event */
119 entry = list_first_entry(&fh->events[ev_idx],
120 struct cec_event_entry, list);
121 list_del(&entry->list);
125 /* Mark that events were lost */
126 entry = list_first_entry_or_null(&fh->events[ev_idx],
127 struct cec_event_entry, list);
129 entry->ev.flags |= CEC_EVENT_FL_DROPPED_EVENTS;
132 mutex_unlock(&fh->lock);
133 wake_up_interruptible(&fh->wait);
136 /* Queue a new event for all open filehandles. */
137 static void cec_queue_event(struct cec_adapter *adap,
138 const struct cec_event *ev)
140 u64 ts = ktime_get_ns();
143 mutex_lock(&adap->devnode.lock_fhs);
144 list_for_each_entry(fh, &adap->devnode.fhs, list)
145 cec_queue_event_fh(fh, ev, ts);
146 mutex_unlock(&adap->devnode.lock_fhs);
149 /* Notify userspace that the CEC pin changed state at the given time. */
150 void cec_queue_pin_cec_event(struct cec_adapter *adap, bool is_high,
151 bool dropped_events, ktime_t ts)
153 struct cec_event ev = {
154 .event = is_high ? CEC_EVENT_PIN_CEC_HIGH :
155 CEC_EVENT_PIN_CEC_LOW,
156 .flags = dropped_events ? CEC_EVENT_FL_DROPPED_EVENTS : 0,
160 mutex_lock(&adap->devnode.lock_fhs);
161 list_for_each_entry(fh, &adap->devnode.fhs, list) {
162 if (fh->mode_follower == CEC_MODE_MONITOR_PIN)
163 cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
165 mutex_unlock(&adap->devnode.lock_fhs);
167 EXPORT_SYMBOL_GPL(cec_queue_pin_cec_event);
169 /* Notify userspace that the HPD pin changed state at the given time. */
170 void cec_queue_pin_hpd_event(struct cec_adapter *adap, bool is_high, ktime_t ts)
172 struct cec_event ev = {
173 .event = is_high ? CEC_EVENT_PIN_HPD_HIGH :
174 CEC_EVENT_PIN_HPD_LOW,
178 mutex_lock(&adap->devnode.lock_fhs);
179 list_for_each_entry(fh, &adap->devnode.fhs, list)
180 cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
181 mutex_unlock(&adap->devnode.lock_fhs);
183 EXPORT_SYMBOL_GPL(cec_queue_pin_hpd_event);
185 /* Notify userspace that the 5V pin changed state at the given time. */
186 void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts)
188 struct cec_event ev = {
189 .event = is_high ? CEC_EVENT_PIN_5V_HIGH :
190 CEC_EVENT_PIN_5V_LOW,
194 mutex_lock(&adap->devnode.lock_fhs);
195 list_for_each_entry(fh, &adap->devnode.fhs, list)
196 cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
197 mutex_unlock(&adap->devnode.lock_fhs);
199 EXPORT_SYMBOL_GPL(cec_queue_pin_5v_event);
202 * Queue a new message for this filehandle.
204 * We keep a queue of at most CEC_MAX_MSG_RX_QUEUE_SZ messages. If the
205 * queue becomes full, then drop the oldest message and keep track
206 * of how many messages we've dropped.
208 static void cec_queue_msg_fh(struct cec_fh *fh, const struct cec_msg *msg)
210 static const struct cec_event ev_lost_msgs = {
211 .event = CEC_EVENT_LOST_MSGS,
217 struct cec_msg_entry *entry;
219 mutex_lock(&fh->lock);
220 entry = kmalloc(sizeof(*entry), GFP_KERNEL);
223 /* Add new msg at the end of the queue */
224 list_add_tail(&entry->list, &fh->msgs);
226 if (fh->queued_msgs < CEC_MAX_MSG_RX_QUEUE_SZ) {
227 /* All is fine if there is enough room */
229 mutex_unlock(&fh->lock);
230 wake_up_interruptible(&fh->wait);
235 * if the message queue is full, then drop the oldest one and
236 * send a lost message event.
238 entry = list_first_entry(&fh->msgs, struct cec_msg_entry, list);
239 list_del(&entry->list);
242 mutex_unlock(&fh->lock);
245 * We lost a message, either because kmalloc failed or the queue
248 cec_queue_event_fh(fh, &ev_lost_msgs, ktime_get_ns());
252 * Queue the message for those filehandles that are in monitor mode.
253 * If valid_la is true (this message is for us or was sent by us),
254 * then pass it on to any monitoring filehandle. If this message
255 * isn't for us or from us, then only give it to filehandles that
256 * are in MONITOR_ALL mode.
258 * This can only happen if the CEC_CAP_MONITOR_ALL capability is
259 * set and the CEC adapter was placed in 'monitor all' mode.
261 static void cec_queue_msg_monitor(struct cec_adapter *adap,
262 const struct cec_msg *msg,
266 u32 monitor_mode = valid_la ? CEC_MODE_MONITOR :
267 CEC_MODE_MONITOR_ALL;
269 mutex_lock(&adap->devnode.lock_fhs);
270 list_for_each_entry(fh, &adap->devnode.fhs, list) {
271 if (fh->mode_follower >= monitor_mode)
272 cec_queue_msg_fh(fh, msg);
274 mutex_unlock(&adap->devnode.lock_fhs);
278 * Queue the message for follower filehandles.
280 static void cec_queue_msg_followers(struct cec_adapter *adap,
281 const struct cec_msg *msg)
285 mutex_lock(&adap->devnode.lock_fhs);
286 list_for_each_entry(fh, &adap->devnode.fhs, list) {
287 if (fh->mode_follower == CEC_MODE_FOLLOWER)
288 cec_queue_msg_fh(fh, msg);
290 mutex_unlock(&adap->devnode.lock_fhs);
293 /* Notify userspace of an adapter state change. */
294 static void cec_post_state_event(struct cec_adapter *adap)
296 struct cec_event ev = {
297 .event = CEC_EVENT_STATE_CHANGE,
300 ev.state_change.phys_addr = adap->phys_addr;
301 ev.state_change.log_addr_mask = adap->log_addrs.log_addr_mask;
302 ev.state_change.have_conn_info =
303 adap->conn_info.type != CEC_CONNECTOR_TYPE_NO_CONNECTOR;
304 cec_queue_event(adap, &ev);
308 * A CEC transmit (and a possible wait for reply) completed.
309 * If this was in blocking mode, then complete it, otherwise
310 * queue the message for userspace to dequeue later.
312 * This function is called with adap->lock held.
314 static void cec_data_completed(struct cec_data *data)
317 * Delete this transmit from the filehandle's xfer_list since
318 * we're done with it.
320 * Note that if the filehandle is closed before this transmit
321 * finished, then the release() function will set data->fh to NULL.
322 * Without that we would be referring to a closed filehandle.
325 list_del_init(&data->xfer_list);
327 if (data->blocking) {
329 * Someone is blocking so mark the message as completed
332 data->completed = true;
336 * No blocking, so just queue the message if needed and
340 cec_queue_msg_fh(data->fh, &data->msg);
346 * A pending CEC transmit needs to be cancelled, either because the CEC
347 * adapter is disabled or the transmit takes an impossibly long time to
348 * finish, or the reply timed out.
350 * This function is called with adap->lock held.
352 static void cec_data_cancel(struct cec_data *data, u8 tx_status, u8 rx_status)
354 struct cec_adapter *adap = data->adap;
357 * It's either the current transmit, or it is a pending
358 * transmit. Take the appropriate action to clear it.
360 if (adap->transmitting == data) {
361 adap->transmitting = NULL;
363 list_del_init(&data->list);
364 if (!(data->msg.tx_status & CEC_TX_STATUS_OK))
365 if (!WARN_ON(!adap->transmit_queue_sz))
366 adap->transmit_queue_sz--;
369 if (data->msg.tx_status & CEC_TX_STATUS_OK) {
370 data->msg.rx_ts = ktime_get_ns();
371 data->msg.rx_status = rx_status;
373 data->msg.tx_status = 0;
375 data->msg.tx_ts = ktime_get_ns();
376 data->msg.tx_status |= tx_status |
377 CEC_TX_STATUS_MAX_RETRIES;
378 data->msg.tx_error_cnt++;
381 data->msg.rx_status = 0;
384 /* Queue transmitted message for monitoring purposes */
385 cec_queue_msg_monitor(adap, &data->msg, 1);
387 if (!data->blocking && data->msg.sequence)
388 /* Allow drivers to process the message first */
389 call_op(adap, received, &data->msg);
391 cec_data_completed(data);
395 * Flush all pending transmits and cancel any pending timeout work.
397 * This function is called with adap->lock held.
399 static void cec_flush(struct cec_adapter *adap)
401 struct cec_data *data, *n;
404 * If the adapter is disabled, or we're asked to stop,
405 * then cancel any pending transmits.
407 while (!list_empty(&adap->transmit_queue)) {
408 data = list_first_entry(&adap->transmit_queue,
409 struct cec_data, list);
410 cec_data_cancel(data, CEC_TX_STATUS_ABORTED, 0);
412 if (adap->transmitting)
413 adap->transmit_in_progress_aborted = true;
415 /* Cancel the pending timeout work. */
416 list_for_each_entry_safe(data, n, &adap->wait_queue, list) {
417 if (cancel_delayed_work(&data->work))
418 cec_data_cancel(data, CEC_TX_STATUS_OK, CEC_RX_STATUS_ABORTED);
420 * If cancel_delayed_work returned false, then
421 * the cec_wait_timeout function is running,
422 * which will call cec_data_completed. So no
423 * need to do anything special in that case.
427 * If something went wrong and this counter isn't what it should
428 * be, then this will reset it back to 0. Warn if it is not 0,
429 * since it indicates a bug, either in this framework or in a
432 if (WARN_ON(adap->transmit_queue_sz))
433 adap->transmit_queue_sz = 0;
437 * Main CEC state machine
439 * Wait until the thread should be stopped, or we are not transmitting and
440 * a new transmit message is queued up, in which case we start transmitting
441 * that message. When the adapter finished transmitting the message it will
442 * call cec_transmit_done().
444 * If the adapter is disabled, then remove all queued messages instead.
446 * If the current transmit times out, then cancel that transmit.
448 int cec_thread_func(void *_adap)
450 struct cec_adapter *adap = _adap;
453 unsigned int signal_free_time;
454 struct cec_data *data;
455 bool timeout = false;
458 if (adap->transmit_in_progress) {
462 * We are transmitting a message, so add a timeout
463 * to prevent the state machine to get stuck waiting
464 * for this message to finalize and add a check to
465 * see if the adapter is disabled in which case the
466 * transmit should be canceled.
468 err = wait_event_interruptible_timeout(adap->kthread_waitq,
470 (!adap->is_configured && !adap->is_configuring)) ||
471 kthread_should_stop() ||
472 (!adap->transmit_in_progress &&
473 !list_empty(&adap->transmit_queue)),
474 msecs_to_jiffies(adap->xfer_timeout_ms));
477 /* Otherwise we just wait for something to happen. */
478 wait_event_interruptible(adap->kthread_waitq,
479 kthread_should_stop() ||
480 (!adap->transmit_in_progress &&
481 !list_empty(&adap->transmit_queue)));
484 mutex_lock(&adap->lock);
486 if ((adap->needs_hpd &&
487 (!adap->is_configured && !adap->is_configuring)) ||
488 kthread_should_stop()) {
493 if (adap->transmit_in_progress && timeout) {
495 * If we timeout, then log that. Normally this does
496 * not happen and it is an indication of a faulty CEC
497 * adapter driver, or the CEC bus is in some weird
498 * state. On rare occasions it can happen if there is
499 * so much traffic on the bus that the adapter was
500 * unable to transmit for xfer_timeout_ms (2.1s by
503 if (adap->transmitting) {
504 pr_warn("cec-%s: message %*ph timed out\n", adap->name,
505 adap->transmitting->msg.len,
506 adap->transmitting->msg.msg);
507 /* Just give up on this. */
508 cec_data_cancel(adap->transmitting,
509 CEC_TX_STATUS_TIMEOUT, 0);
511 pr_warn("cec-%s: transmit timed out\n", adap->name);
513 adap->transmit_in_progress = false;
519 * If we are still transmitting, or there is nothing new to
520 * transmit, then just continue waiting.
522 if (adap->transmit_in_progress || list_empty(&adap->transmit_queue))
525 /* Get a new message to transmit */
526 data = list_first_entry(&adap->transmit_queue,
527 struct cec_data, list);
528 list_del_init(&data->list);
529 if (!WARN_ON(!data->adap->transmit_queue_sz))
530 adap->transmit_queue_sz--;
532 /* Make this the current transmitting message */
533 adap->transmitting = data;
536 * Suggested number of attempts as per the CEC 2.0 spec:
537 * 4 attempts is the default, except for 'secondary poll
538 * messages', i.e. poll messages not sent during the adapter
539 * configuration phase when it allocates logical addresses.
541 if (data->msg.len == 1 && adap->is_configured)
546 /* Set the suggested signal free time */
547 if (data->attempts) {
548 /* should be >= 3 data bit periods for a retry */
549 signal_free_time = CEC_SIGNAL_FREE_TIME_RETRY;
550 } else if (adap->last_initiator !=
551 cec_msg_initiator(&data->msg)) {
552 /* should be >= 5 data bit periods for new initiator */
553 signal_free_time = CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
554 adap->last_initiator = cec_msg_initiator(&data->msg);
557 * should be >= 7 data bit periods for sending another
558 * frame immediately after another.
560 signal_free_time = CEC_SIGNAL_FREE_TIME_NEXT_XFER;
562 if (data->attempts == 0)
563 data->attempts = attempts;
565 adap->transmit_in_progress_aborted = false;
566 /* Tell the adapter to transmit, cancel on error */
567 if (call_op(adap, adap_transmit, data->attempts,
568 signal_free_time, &data->msg))
569 cec_data_cancel(data, CEC_TX_STATUS_ABORTED, 0);
571 adap->transmit_in_progress = true;
574 mutex_unlock(&adap->lock);
576 if (kthread_should_stop())
583 * Called by the CEC adapter if a transmit finished.
585 void cec_transmit_done_ts(struct cec_adapter *adap, u8 status,
586 u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt,
587 u8 error_cnt, ktime_t ts)
589 struct cec_data *data;
591 unsigned int attempts_made = arb_lost_cnt + nack_cnt +
592 low_drive_cnt + error_cnt;
593 bool done = status & (CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_OK);
594 bool aborted = adap->transmit_in_progress_aborted;
596 dprintk(2, "%s: status 0x%02x\n", __func__, status);
597 if (attempts_made < 1)
600 mutex_lock(&adap->lock);
601 data = adap->transmitting;
604 * This might happen if a transmit was issued and the cable is
605 * unplugged while the transmit is ongoing. Ignore this
606 * transmit in that case.
608 if (!adap->transmit_in_progress)
609 dprintk(1, "%s was called without an ongoing transmit!\n",
611 adap->transmit_in_progress = false;
614 adap->transmit_in_progress = false;
615 adap->transmit_in_progress_aborted = false;
619 /* Drivers must fill in the status! */
620 WARN_ON(status == 0);
621 msg->tx_ts = ktime_to_ns(ts);
622 msg->tx_status |= status;
623 msg->tx_arb_lost_cnt += arb_lost_cnt;
624 msg->tx_nack_cnt += nack_cnt;
625 msg->tx_low_drive_cnt += low_drive_cnt;
626 msg->tx_error_cnt += error_cnt;
628 /* Mark that we're done with this transmit */
629 adap->transmitting = NULL;
632 * If there are still retry attempts left and there was an error and
633 * the hardware didn't signal that it retried itself (by setting
634 * CEC_TX_STATUS_MAX_RETRIES), then we will retry ourselves.
636 if (!aborted && data->attempts > attempts_made && !done) {
637 /* Retry this message */
638 data->attempts -= attempts_made;
640 dprintk(2, "retransmit: %*ph (attempts: %d, wait for 0x%02x)\n",
641 msg->len, msg->msg, data->attempts, msg->reply);
643 dprintk(2, "retransmit: %*ph (attempts: %d)\n",
644 msg->len, msg->msg, data->attempts);
645 /* Add the message in front of the transmit queue */
646 list_add(&data->list, &adap->transmit_queue);
647 adap->transmit_queue_sz++;
651 if (aborted && !done)
652 status |= CEC_TX_STATUS_ABORTED;
655 /* Always set CEC_TX_STATUS_MAX_RETRIES on error */
656 if (!(status & CEC_TX_STATUS_OK))
657 msg->tx_status |= CEC_TX_STATUS_MAX_RETRIES;
659 /* Queue transmitted message for monitoring purposes */
660 cec_queue_msg_monitor(adap, msg, 1);
662 if ((status & CEC_TX_STATUS_OK) && adap->is_configured &&
665 * Queue the message into the wait queue if we want to wait
668 list_add_tail(&data->list, &adap->wait_queue);
669 schedule_delayed_work(&data->work,
670 msecs_to_jiffies(msg->timeout));
672 /* Otherwise we're done */
673 cec_data_completed(data);
678 * Wake up the main thread to see if another message is ready
679 * for transmitting or to retry the current message.
681 wake_up_interruptible(&adap->kthread_waitq);
682 mutex_unlock(&adap->lock);
684 EXPORT_SYMBOL_GPL(cec_transmit_done_ts);
686 void cec_transmit_attempt_done_ts(struct cec_adapter *adap,
687 u8 status, ktime_t ts)
689 switch (status & ~CEC_TX_STATUS_MAX_RETRIES) {
690 case CEC_TX_STATUS_OK:
691 cec_transmit_done_ts(adap, status, 0, 0, 0, 0, ts);
693 case CEC_TX_STATUS_ARB_LOST:
694 cec_transmit_done_ts(adap, status, 1, 0, 0, 0, ts);
696 case CEC_TX_STATUS_NACK:
697 cec_transmit_done_ts(adap, status, 0, 1, 0, 0, ts);
699 case CEC_TX_STATUS_LOW_DRIVE:
700 cec_transmit_done_ts(adap, status, 0, 0, 1, 0, ts);
702 case CEC_TX_STATUS_ERROR:
703 cec_transmit_done_ts(adap, status, 0, 0, 0, 1, ts);
706 /* Should never happen */
707 WARN(1, "cec-%s: invalid status 0x%02x\n", adap->name, status);
711 EXPORT_SYMBOL_GPL(cec_transmit_attempt_done_ts);
714 * Called when waiting for a reply times out.
716 static void cec_wait_timeout(struct work_struct *work)
718 struct cec_data *data = container_of(work, struct cec_data, work.work);
719 struct cec_adapter *adap = data->adap;
721 mutex_lock(&adap->lock);
723 * Sanity check in case the timeout and the arrival of the message
724 * happened at the same time.
726 if (list_empty(&data->list))
729 /* Mark the message as timed out */
730 list_del_init(&data->list);
731 cec_data_cancel(data, CEC_TX_STATUS_OK, CEC_RX_STATUS_TIMEOUT);
733 mutex_unlock(&adap->lock);
737 * Transmit a message. The fh argument may be NULL if the transmit is not
738 * associated with a specific filehandle.
740 * This function is called with adap->lock held.
742 int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg,
743 struct cec_fh *fh, bool block)
745 struct cec_data *data;
746 bool is_raw = msg_is_raw(msg);
748 if (adap->devnode.unregistered)
755 msg->tx_arb_lost_cnt = 0;
756 msg->tx_nack_cnt = 0;
757 msg->tx_low_drive_cnt = 0;
758 msg->tx_error_cnt = 0;
761 if (msg->reply && msg->timeout == 0) {
762 /* Make sure the timeout isn't 0. */
765 msg->flags &= CEC_MSG_FL_REPLY_TO_FOLLOWERS | CEC_MSG_FL_RAW;
768 msg->flags &= ~CEC_MSG_FL_REPLY_TO_FOLLOWERS;
771 if (msg->len == 0 || msg->len > CEC_MAX_MSG_SIZE) {
772 dprintk(1, "%s: invalid length %d\n", __func__, msg->len);
776 memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);
779 dprintk(2, "%s: %*ph (wait for 0x%02x%s)\n",
780 __func__, msg->len, msg->msg, msg->reply,
781 !block ? ", nb" : "");
783 dprintk(2, "%s: %*ph%s\n",
784 __func__, msg->len, msg->msg, !block ? " (nb)" : "");
786 if (msg->timeout && msg->len == 1) {
787 dprintk(1, "%s: can't reply to poll msg\n", __func__);
792 if (!capable(CAP_SYS_RAWIO))
795 /* A CDC-Only device can only send CDC messages */
796 if ((adap->log_addrs.flags & CEC_LOG_ADDRS_FL_CDC_ONLY) &&
797 (msg->len == 1 || msg->msg[1] != CEC_MSG_CDC_MESSAGE)) {
798 dprintk(1, "%s: not a CDC message\n", __func__);
802 if (msg->len >= 4 && msg->msg[1] == CEC_MSG_CDC_MESSAGE) {
803 msg->msg[2] = adap->phys_addr >> 8;
804 msg->msg[3] = adap->phys_addr & 0xff;
808 if (cec_msg_destination(msg) == 0xf) {
809 dprintk(1, "%s: invalid poll message\n",
813 if (cec_has_log_addr(adap, cec_msg_destination(msg))) {
815 * If the destination is a logical address our
816 * adapter has already claimed, then just NACK
817 * this. It depends on the hardware what it will
818 * do with a POLL to itself (some OK this), so
819 * it is just as easy to handle it here so the
820 * behavior will be consistent.
822 msg->tx_ts = ktime_get_ns();
823 msg->tx_status = CEC_TX_STATUS_NACK |
824 CEC_TX_STATUS_MAX_RETRIES;
825 msg->tx_nack_cnt = 1;
826 msg->sequence = ++adap->sequence;
828 msg->sequence = ++adap->sequence;
832 if (msg->len > 1 && !cec_msg_is_broadcast(msg) &&
833 cec_has_log_addr(adap, cec_msg_destination(msg))) {
834 dprintk(1, "%s: destination is the adapter itself\n",
838 if (msg->len > 1 && adap->is_configured &&
839 !cec_has_log_addr(adap, cec_msg_initiator(msg))) {
840 dprintk(1, "%s: initiator has unknown logical address %d\n",
841 __func__, cec_msg_initiator(msg));
845 * Special case: allow Ping and IMAGE/TEXT_VIEW_ON to be
846 * transmitted to a TV, even if the adapter is unconfigured.
847 * This makes it possible to detect or wake up displays that
848 * pull down the HPD when in standby.
850 if (!adap->is_configured && !adap->is_configuring &&
852 cec_msg_destination(msg) != CEC_LOG_ADDR_TV ||
853 (msg->len == 2 && msg->msg[1] != CEC_MSG_IMAGE_VIEW_ON &&
854 msg->msg[1] != CEC_MSG_TEXT_VIEW_ON))) {
855 dprintk(1, "%s: adapter is unconfigured\n", __func__);
860 if (!adap->is_configured && !adap->is_configuring) {
861 if (adap->needs_hpd) {
862 dprintk(1, "%s: adapter is unconfigured and needs HPD\n",
867 dprintk(1, "%s: invalid msg->reply\n", __func__);
872 if (adap->transmit_queue_sz >= CEC_MAX_MSG_TX_QUEUE_SZ) {
873 dprintk(2, "%s: transmit queue full\n", __func__);
877 data = kzalloc(sizeof(*data), GFP_KERNEL);
881 msg->sequence = ++adap->sequence;
883 msg->sequence = ++adap->sequence;
888 data->blocking = block;
890 init_completion(&data->c);
891 INIT_DELAYED_WORK(&data->work, cec_wait_timeout);
894 list_add_tail(&data->xfer_list, &fh->xfer_list);
896 INIT_LIST_HEAD(&data->xfer_list);
898 list_add_tail(&data->list, &adap->transmit_queue);
899 adap->transmit_queue_sz++;
900 if (!adap->transmitting)
901 wake_up_interruptible(&adap->kthread_waitq);
903 /* All done if we don't need to block waiting for completion */
908 * Release the lock and wait, retake the lock afterwards.
910 mutex_unlock(&adap->lock);
911 wait_for_completion_killable(&data->c);
912 if (!data->completed)
913 cancel_delayed_work_sync(&data->work);
914 mutex_lock(&adap->lock);
916 /* Cancel the transmit if it was interrupted */
917 if (!data->completed) {
918 if (data->msg.tx_status & CEC_TX_STATUS_OK)
919 cec_data_cancel(data, CEC_TX_STATUS_OK, CEC_RX_STATUS_ABORTED);
921 cec_data_cancel(data, CEC_TX_STATUS_ABORTED, 0);
924 /* The transmit completed (possibly with an error) */
926 if (WARN_ON(!list_empty(&data->list)))
927 list_del(&data->list);
928 if (WARN_ON(!list_empty(&data->xfer_list)))
929 list_del(&data->xfer_list);
934 /* Helper function to be used by drivers and this framework. */
935 int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
940 mutex_lock(&adap->lock);
941 ret = cec_transmit_msg_fh(adap, msg, NULL, block);
942 mutex_unlock(&adap->lock);
945 EXPORT_SYMBOL_GPL(cec_transmit_msg);
948 * I don't like forward references but without this the low-level
949 * cec_received_msg() function would come after a bunch of high-level
950 * CEC protocol handling functions. That was very confusing.
952 static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
955 #define DIRECTED 0x80
956 #define BCAST1_4 0x40
957 #define BCAST2_0 0x20 /* broadcast only allowed for >= 2.0 */
958 #define BCAST (BCAST1_4 | BCAST2_0)
959 #define BOTH (BCAST | DIRECTED)
962 * Specify minimum length and whether the message is directed, broadcast
963 * or both. Messages that do not match the criteria are ignored as per
964 * the CEC specification.
966 static const u8 cec_msg_size[256] = {
967 [CEC_MSG_ACTIVE_SOURCE] = 4 | BCAST,
968 [CEC_MSG_IMAGE_VIEW_ON] = 2 | DIRECTED,
969 [CEC_MSG_TEXT_VIEW_ON] = 2 | DIRECTED,
970 [CEC_MSG_INACTIVE_SOURCE] = 4 | DIRECTED,
971 [CEC_MSG_REQUEST_ACTIVE_SOURCE] = 2 | BCAST,
972 [CEC_MSG_ROUTING_CHANGE] = 6 | BCAST,
973 [CEC_MSG_ROUTING_INFORMATION] = 4 | BCAST,
974 [CEC_MSG_SET_STREAM_PATH] = 4 | BCAST,
975 [CEC_MSG_STANDBY] = 2 | BOTH,
976 [CEC_MSG_RECORD_OFF] = 2 | DIRECTED,
977 [CEC_MSG_RECORD_ON] = 3 | DIRECTED,
978 [CEC_MSG_RECORD_STATUS] = 3 | DIRECTED,
979 [CEC_MSG_RECORD_TV_SCREEN] = 2 | DIRECTED,
980 [CEC_MSG_CLEAR_ANALOGUE_TIMER] = 13 | DIRECTED,
981 [CEC_MSG_CLEAR_DIGITAL_TIMER] = 16 | DIRECTED,
982 [CEC_MSG_CLEAR_EXT_TIMER] = 13 | DIRECTED,
983 [CEC_MSG_SET_ANALOGUE_TIMER] = 13 | DIRECTED,
984 [CEC_MSG_SET_DIGITAL_TIMER] = 16 | DIRECTED,
985 [CEC_MSG_SET_EXT_TIMER] = 13 | DIRECTED,
986 [CEC_MSG_SET_TIMER_PROGRAM_TITLE] = 2 | DIRECTED,
987 [CEC_MSG_TIMER_CLEARED_STATUS] = 3 | DIRECTED,
988 [CEC_MSG_TIMER_STATUS] = 3 | DIRECTED,
989 [CEC_MSG_CEC_VERSION] = 3 | DIRECTED,
990 [CEC_MSG_GET_CEC_VERSION] = 2 | DIRECTED,
991 [CEC_MSG_GIVE_PHYSICAL_ADDR] = 2 | DIRECTED,
992 [CEC_MSG_GET_MENU_LANGUAGE] = 2 | DIRECTED,
993 [CEC_MSG_REPORT_PHYSICAL_ADDR] = 5 | BCAST,
994 [CEC_MSG_SET_MENU_LANGUAGE] = 5 | BCAST,
995 [CEC_MSG_REPORT_FEATURES] = 6 | BCAST,
996 [CEC_MSG_GIVE_FEATURES] = 2 | DIRECTED,
997 [CEC_MSG_DECK_CONTROL] = 3 | DIRECTED,
998 [CEC_MSG_DECK_STATUS] = 3 | DIRECTED,
999 [CEC_MSG_GIVE_DECK_STATUS] = 3 | DIRECTED,
1000 [CEC_MSG_PLAY] = 3 | DIRECTED,
1001 [CEC_MSG_GIVE_TUNER_DEVICE_STATUS] = 3 | DIRECTED,
1002 [CEC_MSG_SELECT_ANALOGUE_SERVICE] = 6 | DIRECTED,
1003 [CEC_MSG_SELECT_DIGITAL_SERVICE] = 9 | DIRECTED,
1004 [CEC_MSG_TUNER_DEVICE_STATUS] = 7 | DIRECTED,
1005 [CEC_MSG_TUNER_STEP_DECREMENT] = 2 | DIRECTED,
1006 [CEC_MSG_TUNER_STEP_INCREMENT] = 2 | DIRECTED,
1007 [CEC_MSG_DEVICE_VENDOR_ID] = 5 | BCAST,
1008 [CEC_MSG_GIVE_DEVICE_VENDOR_ID] = 2 | DIRECTED,
1009 [CEC_MSG_VENDOR_COMMAND] = 2 | DIRECTED,
1010 [CEC_MSG_VENDOR_COMMAND_WITH_ID] = 5 | BOTH,
1011 [CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN] = 2 | BOTH,
1012 [CEC_MSG_VENDOR_REMOTE_BUTTON_UP] = 2 | BOTH,
1013 [CEC_MSG_SET_OSD_STRING] = 3 | DIRECTED,
1014 [CEC_MSG_GIVE_OSD_NAME] = 2 | DIRECTED,
1015 [CEC_MSG_SET_OSD_NAME] = 2 | DIRECTED,
1016 [CEC_MSG_MENU_REQUEST] = 3 | DIRECTED,
1017 [CEC_MSG_MENU_STATUS] = 3 | DIRECTED,
1018 [CEC_MSG_USER_CONTROL_PRESSED] = 3 | DIRECTED,
1019 [CEC_MSG_USER_CONTROL_RELEASED] = 2 | DIRECTED,
1020 [CEC_MSG_GIVE_DEVICE_POWER_STATUS] = 2 | DIRECTED,
1021 [CEC_MSG_REPORT_POWER_STATUS] = 3 | DIRECTED | BCAST2_0,
1022 [CEC_MSG_FEATURE_ABORT] = 4 | DIRECTED,
1023 [CEC_MSG_ABORT] = 2 | DIRECTED,
1024 [CEC_MSG_GIVE_AUDIO_STATUS] = 2 | DIRECTED,
1025 [CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS] = 2 | DIRECTED,
1026 [CEC_MSG_REPORT_AUDIO_STATUS] = 3 | DIRECTED,
1027 [CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED,
1028 [CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED,
1029 [CEC_MSG_SET_SYSTEM_AUDIO_MODE] = 3 | BOTH,
1030 [CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST] = 2 | DIRECTED,
1031 [CEC_MSG_SYSTEM_AUDIO_MODE_STATUS] = 3 | DIRECTED,
1032 [CEC_MSG_SET_AUDIO_RATE] = 3 | DIRECTED,
1033 [CEC_MSG_INITIATE_ARC] = 2 | DIRECTED,
1034 [CEC_MSG_REPORT_ARC_INITIATED] = 2 | DIRECTED,
1035 [CEC_MSG_REPORT_ARC_TERMINATED] = 2 | DIRECTED,
1036 [CEC_MSG_REQUEST_ARC_INITIATION] = 2 | DIRECTED,
1037 [CEC_MSG_REQUEST_ARC_TERMINATION] = 2 | DIRECTED,
1038 [CEC_MSG_TERMINATE_ARC] = 2 | DIRECTED,
1039 [CEC_MSG_REQUEST_CURRENT_LATENCY] = 4 | BCAST,
1040 [CEC_MSG_REPORT_CURRENT_LATENCY] = 6 | BCAST,
1041 [CEC_MSG_CDC_MESSAGE] = 2 | BCAST,
1044 /* Called by the CEC adapter if a message is received */
1045 void cec_received_msg_ts(struct cec_adapter *adap,
1046 struct cec_msg *msg, ktime_t ts)
1048 struct cec_data *data;
1049 u8 msg_init = cec_msg_initiator(msg);
1050 u8 msg_dest = cec_msg_destination(msg);
1051 u8 cmd = msg->msg[1];
1052 bool is_reply = false;
1053 bool valid_la = true;
1056 if (WARN_ON(!msg->len || msg->len > CEC_MAX_MSG_SIZE))
1059 if (adap->devnode.unregistered)
1063 * Some CEC adapters will receive the messages that they transmitted.
1064 * This test filters out those messages by checking if we are the
1065 * initiator, and just returning in that case.
1067 * Note that this won't work if this is an Unregistered device.
1069 * It is bad practice if the hardware receives the message that it
1070 * transmitted and luckily most CEC adapters behave correctly in this
1073 if (msg_init != CEC_LOG_ADDR_UNREGISTERED &&
1074 cec_has_log_addr(adap, msg_init))
1077 msg->rx_ts = ktime_to_ns(ts);
1078 msg->rx_status = CEC_RX_STATUS_OK;
1079 msg->sequence = msg->reply = msg->timeout = 0;
1082 msg->tx_arb_lost_cnt = 0;
1083 msg->tx_nack_cnt = 0;
1084 msg->tx_low_drive_cnt = 0;
1085 msg->tx_error_cnt = 0;
1087 memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);
1089 mutex_lock(&adap->lock);
1090 dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
1092 adap->last_initiator = 0xff;
1094 /* Check if this message was for us (directed or broadcast). */
1095 if (!cec_msg_is_broadcast(msg))
1096 valid_la = cec_has_log_addr(adap, msg_dest);
1099 * Check if the length is not too short or if the message is a
1100 * broadcast message where a directed message was expected or
1101 * vice versa. If so, then the message has to be ignored (according
1102 * to section CEC 7.3 and CEC 12.2).
1104 if (valid_la && msg->len > 1 && cec_msg_size[cmd]) {
1105 u8 dir_fl = cec_msg_size[cmd] & BOTH;
1107 min_len = cec_msg_size[cmd] & 0x1f;
1108 if (msg->len < min_len)
1110 else if (!cec_msg_is_broadcast(msg) && !(dir_fl & DIRECTED))
1112 else if (cec_msg_is_broadcast(msg) && !(dir_fl & BCAST))
1114 else if (cec_msg_is_broadcast(msg) &&
1115 adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0 &&
1116 !(dir_fl & BCAST1_4))
1119 if (valid_la && min_len) {
1120 /* These messages have special length requirements */
1122 case CEC_MSG_TIMER_STATUS:
1123 if (msg->msg[2] & 0x10) {
1124 switch (msg->msg[2] & 0xf) {
1125 case CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE:
1126 case CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE:
1131 } else if ((msg->msg[2] & 0xf) == CEC_OP_PROG_ERROR_DUPLICATE) {
1136 case CEC_MSG_RECORD_ON:
1137 switch (msg->msg[2]) {
1138 case CEC_OP_RECORD_SRC_OWN:
1140 case CEC_OP_RECORD_SRC_DIGITAL:
1144 case CEC_OP_RECORD_SRC_ANALOG:
1148 case CEC_OP_RECORD_SRC_EXT_PLUG:
1152 case CEC_OP_RECORD_SRC_EXT_PHYS_ADDR:
1161 /* It's a valid message and not a poll or CDC message */
1162 if (valid_la && msg->len > 1 && cmd != CEC_MSG_CDC_MESSAGE) {
1163 bool abort = cmd == CEC_MSG_FEATURE_ABORT;
1165 /* The aborted command is in msg[2] */
1170 * Walk over all transmitted messages that are waiting for a
1173 list_for_each_entry(data, &adap->wait_queue, list) {
1174 struct cec_msg *dst = &data->msg;
1177 * The *only* CEC message that has two possible replies
1178 * is CEC_MSG_INITIATE_ARC.
1179 * In this case allow either of the two replies.
1181 if (!abort && dst->msg[1] == CEC_MSG_INITIATE_ARC &&
1182 (cmd == CEC_MSG_REPORT_ARC_INITIATED ||
1183 cmd == CEC_MSG_REPORT_ARC_TERMINATED) &&
1184 (dst->reply == CEC_MSG_REPORT_ARC_INITIATED ||
1185 dst->reply == CEC_MSG_REPORT_ARC_TERMINATED))
1188 /* Does the command match? */
1189 if ((abort && cmd != dst->msg[1]) ||
1190 (!abort && cmd != dst->reply))
1193 /* Does the addressing match? */
1194 if (msg_init != cec_msg_destination(dst) &&
1195 !cec_msg_is_broadcast(dst))
1198 /* We got a reply */
1199 memcpy(dst->msg, msg->msg, msg->len);
1200 dst->len = msg->len;
1201 dst->rx_ts = msg->rx_ts;
1202 dst->rx_status = msg->rx_status;
1204 dst->rx_status |= CEC_RX_STATUS_FEATURE_ABORT;
1205 msg->flags = dst->flags;
1206 msg->sequence = dst->sequence;
1207 /* Remove it from the wait_queue */
1208 list_del_init(&data->list);
1210 /* Cancel the pending timeout work */
1211 if (!cancel_delayed_work(&data->work)) {
1212 mutex_unlock(&adap->lock);
1213 cancel_delayed_work_sync(&data->work);
1214 mutex_lock(&adap->lock);
1217 * Mark this as a reply, provided someone is still
1218 * waiting for the answer.
1222 cec_data_completed(data);
1226 mutex_unlock(&adap->lock);
1228 /* Pass the message on to any monitoring filehandles */
1229 cec_queue_msg_monitor(adap, msg, valid_la);
1231 /* We're done if it is not for us or a poll message */
1232 if (!valid_la || msg->len <= 1)
1235 if (adap->log_addrs.log_addr_mask == 0)
1239 * Process the message on the protocol level. If is_reply is true,
1240 * then cec_receive_notify() won't pass on the reply to the listener(s)
1241 * since that was already done by cec_data_completed() above.
1243 cec_receive_notify(adap, msg, is_reply);
1245 EXPORT_SYMBOL_GPL(cec_received_msg_ts);
1247 /* Logical Address Handling */
1250 * Attempt to claim a specific logical address.
1252 * This function is called with adap->lock held.
1254 static int cec_config_log_addr(struct cec_adapter *adap,
1256 unsigned int log_addr)
1258 struct cec_log_addrs *las = &adap->log_addrs;
1259 struct cec_msg msg = { };
1260 const unsigned int max_retries = 2;
1264 if (cec_has_log_addr(adap, log_addr))
1267 /* Send poll message */
1269 msg.msg[0] = (log_addr << 4) | log_addr;
1271 for (i = 0; i < max_retries; i++) {
1272 err = cec_transmit_msg_fh(adap, &msg, NULL, true);
1275 * While trying to poll the physical address was reset
1276 * and the adapter was unconfigured, so bail out.
1278 if (adap->phys_addr == CEC_PHYS_ADDR_INVALID)
1281 /* Also bail out if the PA changed while configuring. */
1282 if (adap->must_reconfigure)
1289 * The message was aborted or timed out due to a disconnect or
1290 * unconfigure, just bail out.
1293 (CEC_TX_STATUS_ABORTED | CEC_TX_STATUS_TIMEOUT))
1295 if (msg.tx_status & CEC_TX_STATUS_OK)
1297 if (msg.tx_status & CEC_TX_STATUS_NACK)
1300 * Retry up to max_retries times if the message was neither
1301 * OKed or NACKed. This can happen due to e.g. a Lost
1302 * Arbitration condition.
1307 * If we are unable to get an OK or a NACK after max_retries attempts
1308 * (and note that each attempt already consists of four polls), then
1309 * we assume that something is really weird and that it is not a
1310 * good idea to try and claim this logical address.
1312 if (i == max_retries)
1316 * Message not acknowledged, so this logical
1317 * address is free to use.
1319 err = call_op(adap, adap_log_addr, log_addr);
1323 las->log_addr[idx] = log_addr;
1324 las->log_addr_mask |= 1 << log_addr;
1329 * Unconfigure the adapter: clear all logical addresses and send
1330 * the state changed event.
1332 * This function is called with adap->lock held.
1334 static void cec_adap_unconfigure(struct cec_adapter *adap)
1336 if (!adap->needs_hpd || adap->phys_addr != CEC_PHYS_ADDR_INVALID)
1337 WARN_ON(call_op(adap, adap_log_addr, CEC_LOG_ADDR_INVALID));
1338 adap->log_addrs.log_addr_mask = 0;
1339 adap->is_configured = false;
1341 wake_up_interruptible(&adap->kthread_waitq);
1342 cec_post_state_event(adap);
1343 call_void_op(adap, adap_configured, false);
1347 * Attempt to claim the required logical addresses.
1349 static int cec_config_thread_func(void *arg)
1351 /* The various LAs for each type of device */
1352 static const u8 tv_log_addrs[] = {
1353 CEC_LOG_ADDR_TV, CEC_LOG_ADDR_SPECIFIC,
1354 CEC_LOG_ADDR_INVALID
1356 static const u8 record_log_addrs[] = {
1357 CEC_LOG_ADDR_RECORD_1, CEC_LOG_ADDR_RECORD_2,
1358 CEC_LOG_ADDR_RECORD_3,
1359 CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
1360 CEC_LOG_ADDR_INVALID
1362 static const u8 tuner_log_addrs[] = {
1363 CEC_LOG_ADDR_TUNER_1, CEC_LOG_ADDR_TUNER_2,
1364 CEC_LOG_ADDR_TUNER_3, CEC_LOG_ADDR_TUNER_4,
1365 CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
1366 CEC_LOG_ADDR_INVALID
1368 static const u8 playback_log_addrs[] = {
1369 CEC_LOG_ADDR_PLAYBACK_1, CEC_LOG_ADDR_PLAYBACK_2,
1370 CEC_LOG_ADDR_PLAYBACK_3,
1371 CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
1372 CEC_LOG_ADDR_INVALID
1374 static const u8 audiosystem_log_addrs[] = {
1375 CEC_LOG_ADDR_AUDIOSYSTEM,
1376 CEC_LOG_ADDR_INVALID
1378 static const u8 specific_use_log_addrs[] = {
1379 CEC_LOG_ADDR_SPECIFIC,
1380 CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
1381 CEC_LOG_ADDR_INVALID
1383 static const u8 *type2addrs[6] = {
1384 [CEC_LOG_ADDR_TYPE_TV] = tv_log_addrs,
1385 [CEC_LOG_ADDR_TYPE_RECORD] = record_log_addrs,
1386 [CEC_LOG_ADDR_TYPE_TUNER] = tuner_log_addrs,
1387 [CEC_LOG_ADDR_TYPE_PLAYBACK] = playback_log_addrs,
1388 [CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = audiosystem_log_addrs,
1389 [CEC_LOG_ADDR_TYPE_SPECIFIC] = specific_use_log_addrs,
1391 static const u16 type2mask[] = {
1392 [CEC_LOG_ADDR_TYPE_TV] = CEC_LOG_ADDR_MASK_TV,
1393 [CEC_LOG_ADDR_TYPE_RECORD] = CEC_LOG_ADDR_MASK_RECORD,
1394 [CEC_LOG_ADDR_TYPE_TUNER] = CEC_LOG_ADDR_MASK_TUNER,
1395 [CEC_LOG_ADDR_TYPE_PLAYBACK] = CEC_LOG_ADDR_MASK_PLAYBACK,
1396 [CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = CEC_LOG_ADDR_MASK_AUDIOSYSTEM,
1397 [CEC_LOG_ADDR_TYPE_SPECIFIC] = CEC_LOG_ADDR_MASK_SPECIFIC,
1399 struct cec_adapter *adap = arg;
1400 struct cec_log_addrs *las = &adap->log_addrs;
1404 mutex_lock(&adap->lock);
1405 dprintk(1, "physical address: %x.%x.%x.%x, claim %d logical addresses\n",
1406 cec_phys_addr_exp(adap->phys_addr), las->num_log_addrs);
1407 las->log_addr_mask = 0;
1409 if (las->log_addr_type[0] == CEC_LOG_ADDR_TYPE_UNREGISTERED)
1413 for (i = 0; i < las->num_log_addrs; i++) {
1414 unsigned int type = las->log_addr_type[i];
1419 * The TV functionality can only map to physical address 0.
1420 * For any other address, try the Specific functionality
1421 * instead as per the spec.
1423 if (adap->phys_addr && type == CEC_LOG_ADDR_TYPE_TV)
1424 type = CEC_LOG_ADDR_TYPE_SPECIFIC;
1426 la_list = type2addrs[type];
1427 last_la = las->log_addr[i];
1428 las->log_addr[i] = CEC_LOG_ADDR_INVALID;
1429 if (last_la == CEC_LOG_ADDR_INVALID ||
1430 last_la == CEC_LOG_ADDR_UNREGISTERED ||
1431 !((1 << last_la) & type2mask[type]))
1432 last_la = la_list[0];
1434 err = cec_config_log_addr(adap, i, last_la);
1436 if (adap->must_reconfigure) {
1437 adap->must_reconfigure = false;
1438 las->log_addr_mask = 0;
1442 if (err > 0) /* Reused last LA */
1448 for (j = 0; la_list[j] != CEC_LOG_ADDR_INVALID; j++) {
1449 /* Tried this one already, skip it */
1450 if (la_list[j] == last_la)
1452 /* The backup addresses are CEC 2.0 specific */
1453 if ((la_list[j] == CEC_LOG_ADDR_BACKUP_1 ||
1454 la_list[j] == CEC_LOG_ADDR_BACKUP_2) &&
1455 las->cec_version < CEC_OP_CEC_VERSION_2_0)
1458 err = cec_config_log_addr(adap, i, la_list[j]);
1459 if (err == 0) /* LA is in use */
1463 /* Done, claimed an LA */
1467 if (la_list[j] == CEC_LOG_ADDR_INVALID)
1468 dprintk(1, "could not claim LA %d\n", i);
1471 if (adap->log_addrs.log_addr_mask == 0 &&
1472 !(las->flags & CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK))
1476 if (adap->log_addrs.log_addr_mask == 0) {
1477 /* Fall back to unregistered */
1478 las->log_addr[0] = CEC_LOG_ADDR_UNREGISTERED;
1479 las->log_addr_mask = 1 << las->log_addr[0];
1480 for (i = 1; i < las->num_log_addrs; i++)
1481 las->log_addr[i] = CEC_LOG_ADDR_INVALID;
1483 for (i = las->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++)
1484 las->log_addr[i] = CEC_LOG_ADDR_INVALID;
1485 adap->is_configured = true;
1486 adap->is_configuring = false;
1487 adap->must_reconfigure = false;
1488 cec_post_state_event(adap);
1491 * Now post the Report Features and Report Physical Address broadcast
1492 * messages. Note that these are non-blocking transmits, meaning that
1493 * they are just queued up and once adap->lock is unlocked the main
1494 * thread will kick in and start transmitting these.
1496 * If after this function is done (but before one or more of these
1497 * messages are actually transmitted) the CEC adapter is unconfigured,
1498 * then any remaining messages will be dropped by the main thread.
1500 for (i = 0; i < las->num_log_addrs; i++) {
1501 struct cec_msg msg = {};
1503 if (las->log_addr[i] == CEC_LOG_ADDR_INVALID ||
1504 (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY))
1507 msg.msg[0] = (las->log_addr[i] << 4) | 0x0f;
1509 /* Report Features must come first according to CEC 2.0 */
1510 if (las->log_addr[i] != CEC_LOG_ADDR_UNREGISTERED &&
1511 adap->log_addrs.cec_version >= CEC_OP_CEC_VERSION_2_0) {
1512 cec_fill_msg_report_features(adap, &msg, i);
1513 cec_transmit_msg_fh(adap, &msg, NULL, false);
1516 /* Report Physical Address */
1517 cec_msg_report_physical_addr(&msg, adap->phys_addr,
1518 las->primary_device_type[i]);
1519 dprintk(1, "config: la %d pa %x.%x.%x.%x\n",
1521 cec_phys_addr_exp(adap->phys_addr));
1522 cec_transmit_msg_fh(adap, &msg, NULL, false);
1524 /* Report Vendor ID */
1525 if (adap->log_addrs.vendor_id != CEC_VENDOR_ID_NONE) {
1526 cec_msg_device_vendor_id(&msg,
1527 adap->log_addrs.vendor_id);
1528 cec_transmit_msg_fh(adap, &msg, NULL, false);
1531 adap->kthread_config = NULL;
1532 complete(&adap->config_completion);
1533 mutex_unlock(&adap->lock);
1534 call_void_op(adap, adap_configured, true);
1538 for (i = 0; i < las->num_log_addrs; i++)
1539 las->log_addr[i] = CEC_LOG_ADDR_INVALID;
1540 cec_adap_unconfigure(adap);
1541 adap->is_configuring = false;
1542 adap->must_reconfigure = false;
1543 adap->kthread_config = NULL;
1544 complete(&adap->config_completion);
1545 mutex_unlock(&adap->lock);
1550 * Called from either __cec_s_phys_addr or __cec_s_log_addrs to claim the
1551 * logical addresses.
1553 * This function is called with adap->lock held.
1555 static void cec_claim_log_addrs(struct cec_adapter *adap, bool block)
1557 if (WARN_ON(adap->is_configuring || adap->is_configured))
1560 init_completion(&adap->config_completion);
1562 /* Ready to kick off the thread */
1563 adap->is_configuring = true;
1564 adap->kthread_config = kthread_run(cec_config_thread_func, adap,
1565 "ceccfg-%s", adap->name);
1566 if (IS_ERR(adap->kthread_config)) {
1567 adap->kthread_config = NULL;
1568 adap->is_configuring = false;
1570 mutex_unlock(&adap->lock);
1571 wait_for_completion(&adap->config_completion);
1572 mutex_lock(&adap->lock);
1577 * Helper function to enable/disable the CEC adapter.
1579 * This function is called with adap->lock held.
1581 static int cec_adap_enable(struct cec_adapter *adap)
1586 enable = adap->monitor_all_cnt || adap->monitor_pin_cnt ||
1587 adap->log_addrs.num_log_addrs;
1588 if (adap->needs_hpd)
1589 enable = enable && adap->phys_addr != CEC_PHYS_ADDR_INVALID;
1591 if (enable == adap->is_enabled)
1594 /* serialize adap_enable */
1595 mutex_lock(&adap->devnode.lock);
1597 adap->last_initiator = 0xff;
1598 adap->transmit_in_progress = false;
1599 ret = adap->ops->adap_enable(adap, true);
1602 * Enable monitor-all/pin modes if needed. We warn, but
1603 * continue if this fails as this is not a critical error.
1605 if (adap->monitor_all_cnt)
1606 WARN_ON(call_op(adap, adap_monitor_all_enable, true));
1607 if (adap->monitor_pin_cnt)
1608 WARN_ON(call_op(adap, adap_monitor_pin_enable, true));
1611 /* Disable monitor-all/pin modes if needed (needs_hpd == 1) */
1612 if (adap->monitor_all_cnt)
1613 WARN_ON(call_op(adap, adap_monitor_all_enable, false));
1614 if (adap->monitor_pin_cnt)
1615 WARN_ON(call_op(adap, adap_monitor_pin_enable, false));
1616 WARN_ON(adap->ops->adap_enable(adap, false));
1617 adap->last_initiator = 0xff;
1618 adap->transmit_in_progress = false;
1619 adap->transmit_in_progress_aborted = false;
1620 if (adap->transmitting)
1621 cec_data_cancel(adap->transmitting, CEC_TX_STATUS_ABORTED, 0);
1624 adap->is_enabled = enable;
1625 wake_up_interruptible(&adap->kthread_waitq);
1626 mutex_unlock(&adap->devnode.lock);
1630 /* Set a new physical address and send an event notifying userspace of this.
1632 * This function is called with adap->lock held.
1634 void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
1636 bool becomes_invalid = phys_addr == CEC_PHYS_ADDR_INVALID;
1637 bool is_invalid = adap->phys_addr == CEC_PHYS_ADDR_INVALID;
1639 if (phys_addr == adap->phys_addr)
1641 if (!becomes_invalid && adap->devnode.unregistered)
1644 dprintk(1, "new physical address %x.%x.%x.%x\n",
1645 cec_phys_addr_exp(phys_addr));
1646 if (becomes_invalid || !is_invalid) {
1647 adap->phys_addr = CEC_PHYS_ADDR_INVALID;
1648 cec_post_state_event(adap);
1649 cec_adap_unconfigure(adap);
1650 if (becomes_invalid) {
1651 cec_adap_enable(adap);
1656 adap->phys_addr = phys_addr;
1658 cec_adap_enable(adap);
1660 cec_post_state_event(adap);
1661 if (!adap->log_addrs.num_log_addrs)
1663 if (adap->is_configuring)
1664 adap->must_reconfigure = true;
1666 cec_claim_log_addrs(adap, block);
1669 void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
1671 if (IS_ERR_OR_NULL(adap))
1674 mutex_lock(&adap->lock);
1675 __cec_s_phys_addr(adap, phys_addr, block);
1676 mutex_unlock(&adap->lock);
1678 EXPORT_SYMBOL_GPL(cec_s_phys_addr);
1680 void cec_s_phys_addr_from_edid(struct cec_adapter *adap,
1681 const struct edid *edid)
1683 u16 pa = CEC_PHYS_ADDR_INVALID;
1685 if (edid && edid->extensions)
1686 pa = cec_get_edid_phys_addr((const u8 *)edid,
1687 EDID_LENGTH * (edid->extensions + 1), NULL);
1688 cec_s_phys_addr(adap, pa, false);
1690 EXPORT_SYMBOL_GPL(cec_s_phys_addr_from_edid);
1692 void cec_s_conn_info(struct cec_adapter *adap,
1693 const struct cec_connector_info *conn_info)
1695 if (IS_ERR_OR_NULL(adap))
1698 if (!(adap->capabilities & CEC_CAP_CONNECTOR_INFO))
1701 mutex_lock(&adap->lock);
1703 adap->conn_info = *conn_info;
1705 memset(&adap->conn_info, 0, sizeof(adap->conn_info));
1706 cec_post_state_event(adap);
1707 mutex_unlock(&adap->lock);
1709 EXPORT_SYMBOL_GPL(cec_s_conn_info);
1712 * Called from either the ioctl or a driver to set the logical addresses.
1714 * This function is called with adap->lock held.
1716 int __cec_s_log_addrs(struct cec_adapter *adap,
1717 struct cec_log_addrs *log_addrs, bool block)
1723 if (adap->devnode.unregistered)
1726 if (!log_addrs || log_addrs->num_log_addrs == 0) {
1727 if (!adap->log_addrs.num_log_addrs)
1729 if (adap->is_configuring || adap->is_configured)
1730 cec_adap_unconfigure(adap);
1731 adap->log_addrs.num_log_addrs = 0;
1732 for (i = 0; i < CEC_MAX_LOG_ADDRS; i++)
1733 adap->log_addrs.log_addr[i] = CEC_LOG_ADDR_INVALID;
1734 adap->log_addrs.osd_name[0] = '\0';
1735 adap->log_addrs.vendor_id = CEC_VENDOR_ID_NONE;
1736 adap->log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0;
1737 cec_adap_enable(adap);
1741 if (log_addrs->flags & CEC_LOG_ADDRS_FL_CDC_ONLY) {
1743 * Sanitize log_addrs fields if a CDC-Only device is
1746 log_addrs->num_log_addrs = 1;
1747 log_addrs->osd_name[0] = '\0';
1748 log_addrs->vendor_id = CEC_VENDOR_ID_NONE;
1749 log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
1751 * This is just an internal convention since a CDC-Only device
1752 * doesn't have to be a switch. But switches already use
1753 * unregistered, so it makes some kind of sense to pick this
1754 * as the primary device. Since a CDC-Only device never sends
1755 * any 'normal' CEC messages this primary device type is never
1756 * sent over the CEC bus.
1758 log_addrs->primary_device_type[0] = CEC_OP_PRIM_DEVTYPE_SWITCH;
1759 log_addrs->all_device_types[0] = 0;
1760 log_addrs->features[0][0] = 0;
1761 log_addrs->features[0][1] = 0;
1764 /* Ensure the osd name is 0-terminated */
1765 log_addrs->osd_name[sizeof(log_addrs->osd_name) - 1] = '\0';
1768 if (log_addrs->num_log_addrs > adap->available_log_addrs) {
1769 dprintk(1, "num_log_addrs > %d\n", adap->available_log_addrs);
1774 * Vendor ID is a 24 bit number, so check if the value is
1775 * within the correct range.
1777 if (log_addrs->vendor_id != CEC_VENDOR_ID_NONE &&
1778 (log_addrs->vendor_id & 0xff000000) != 0) {
1779 dprintk(1, "invalid vendor ID\n");
1783 if (log_addrs->cec_version != CEC_OP_CEC_VERSION_1_4 &&
1784 log_addrs->cec_version != CEC_OP_CEC_VERSION_2_0) {
1785 dprintk(1, "invalid CEC version\n");
1789 if (log_addrs->num_log_addrs > 1)
1790 for (i = 0; i < log_addrs->num_log_addrs; i++)
1791 if (log_addrs->log_addr_type[i] ==
1792 CEC_LOG_ADDR_TYPE_UNREGISTERED) {
1793 dprintk(1, "num_log_addrs > 1 can't be combined with unregistered LA\n");
1797 for (i = 0; i < log_addrs->num_log_addrs; i++) {
1798 const u8 feature_sz = ARRAY_SIZE(log_addrs->features[0]);
1799 u8 *features = log_addrs->features[i];
1800 bool op_is_dev_features = false;
1803 log_addrs->log_addr[i] = CEC_LOG_ADDR_INVALID;
1804 if (log_addrs->log_addr_type[i] > CEC_LOG_ADDR_TYPE_UNREGISTERED) {
1805 dprintk(1, "unknown logical address type\n");
1808 if (type_mask & (1 << log_addrs->log_addr_type[i])) {
1809 dprintk(1, "duplicate logical address type\n");
1812 type_mask |= 1 << log_addrs->log_addr_type[i];
1813 if ((type_mask & (1 << CEC_LOG_ADDR_TYPE_RECORD)) &&
1814 (type_mask & (1 << CEC_LOG_ADDR_TYPE_PLAYBACK))) {
1815 /* Record already contains the playback functionality */
1816 dprintk(1, "invalid record + playback combination\n");
1819 if (log_addrs->primary_device_type[i] >
1820 CEC_OP_PRIM_DEVTYPE_PROCESSOR) {
1821 dprintk(1, "unknown primary device type\n");
1824 if (log_addrs->primary_device_type[i] == 2) {
1825 dprintk(1, "invalid primary device type\n");
1828 for (j = 0; j < feature_sz; j++) {
1829 if ((features[j] & 0x80) == 0) {
1830 if (op_is_dev_features)
1832 op_is_dev_features = true;
1835 if (!op_is_dev_features || j == feature_sz) {
1836 dprintk(1, "malformed features\n");
1839 /* Zero unused part of the feature array */
1840 memset(features + j + 1, 0, feature_sz - j - 1);
1843 if (log_addrs->cec_version >= CEC_OP_CEC_VERSION_2_0) {
1844 if (log_addrs->num_log_addrs > 2) {
1845 dprintk(1, "CEC 2.0 allows no more than 2 logical addresses\n");
1848 if (log_addrs->num_log_addrs == 2) {
1849 if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_AUDIOSYSTEM) |
1850 (1 << CEC_LOG_ADDR_TYPE_TV)))) {
1851 dprintk(1, "two LAs is only allowed for audiosystem and TV\n");
1854 if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_PLAYBACK) |
1855 (1 << CEC_LOG_ADDR_TYPE_RECORD)))) {
1856 dprintk(1, "an audiosystem/TV can only be combined with record or playback\n");
1862 /* Zero unused LAs */
1863 for (i = log_addrs->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++) {
1864 log_addrs->primary_device_type[i] = 0;
1865 log_addrs->log_addr_type[i] = 0;
1866 log_addrs->all_device_types[i] = 0;
1867 memset(log_addrs->features[i], 0,
1868 sizeof(log_addrs->features[i]));
1871 log_addrs->log_addr_mask = adap->log_addrs.log_addr_mask;
1872 adap->log_addrs = *log_addrs;
1873 err = cec_adap_enable(adap);
1874 if (!err && adap->phys_addr != CEC_PHYS_ADDR_INVALID)
1875 cec_claim_log_addrs(adap, block);
1879 int cec_s_log_addrs(struct cec_adapter *adap,
1880 struct cec_log_addrs *log_addrs, bool block)
1884 mutex_lock(&adap->lock);
1885 err = __cec_s_log_addrs(adap, log_addrs, block);
1886 mutex_unlock(&adap->lock);
1889 EXPORT_SYMBOL_GPL(cec_s_log_addrs);
1891 /* High-level core CEC message handling */
1893 /* Fill in the Report Features message */
1894 static void cec_fill_msg_report_features(struct cec_adapter *adap,
1895 struct cec_msg *msg,
1896 unsigned int la_idx)
1898 const struct cec_log_addrs *las = &adap->log_addrs;
1899 const u8 *features = las->features[la_idx];
1900 bool op_is_dev_features = false;
1903 /* Report Features */
1904 msg->msg[0] = (las->log_addr[la_idx] << 4) | 0x0f;
1906 msg->msg[1] = CEC_MSG_REPORT_FEATURES;
1907 msg->msg[2] = adap->log_addrs.cec_version;
1908 msg->msg[3] = las->all_device_types[la_idx];
1910 /* Write RC Profiles first, then Device Features */
1911 for (idx = 0; idx < ARRAY_SIZE(las->features[0]); idx++) {
1912 msg->msg[msg->len++] = features[idx];
1913 if ((features[idx] & CEC_OP_FEAT_EXT) == 0) {
1914 if (op_is_dev_features)
1916 op_is_dev_features = true;
1921 /* Transmit the Feature Abort message */
1922 static int cec_feature_abort_reason(struct cec_adapter *adap,
1923 struct cec_msg *msg, u8 reason)
1925 struct cec_msg tx_msg = { };
1928 * Don't reply with CEC_MSG_FEATURE_ABORT to a CEC_MSG_FEATURE_ABORT
1931 if (msg->msg[1] == CEC_MSG_FEATURE_ABORT)
1933 /* Don't Feature Abort messages from 'Unregistered' */
1934 if (cec_msg_initiator(msg) == CEC_LOG_ADDR_UNREGISTERED)
1936 cec_msg_set_reply_to(&tx_msg, msg);
1937 cec_msg_feature_abort(&tx_msg, msg->msg[1], reason);
1938 return cec_transmit_msg(adap, &tx_msg, false);
1941 static int cec_feature_abort(struct cec_adapter *adap, struct cec_msg *msg)
1943 return cec_feature_abort_reason(adap, msg,
1944 CEC_OP_ABORT_UNRECOGNIZED_OP);
1947 static int cec_feature_refused(struct cec_adapter *adap, struct cec_msg *msg)
1949 return cec_feature_abort_reason(adap, msg,
1950 CEC_OP_ABORT_REFUSED);
1954 * Called when a CEC message is received. This function will do any
1955 * necessary core processing. The is_reply bool is true if this message
1956 * is a reply to an earlier transmit.
1958 * The message is either a broadcast message or a valid directed message.
1960 static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
1963 bool is_broadcast = cec_msg_is_broadcast(msg);
1964 u8 dest_laddr = cec_msg_destination(msg);
1965 u8 init_laddr = cec_msg_initiator(msg);
1966 u8 devtype = cec_log_addr2dev(adap, dest_laddr);
1967 int la_idx = cec_log_addr2idx(adap, dest_laddr);
1968 bool from_unregistered = init_laddr == 0xf;
1969 struct cec_msg tx_cec_msg = { };
1971 dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
1973 /* If this is a CDC-Only device, then ignore any non-CDC messages */
1974 if (cec_is_cdc_only(&adap->log_addrs) &&
1975 msg->msg[1] != CEC_MSG_CDC_MESSAGE)
1978 /* Allow drivers to process the message first */
1979 if (adap->ops->received && !adap->devnode.unregistered &&
1980 adap->ops->received(adap, msg) != -ENOMSG)
1984 * REPORT_PHYSICAL_ADDR, CEC_MSG_USER_CONTROL_PRESSED and
1985 * CEC_MSG_USER_CONTROL_RELEASED messages always have to be
1986 * handled by the CEC core, even if the passthrough mode is on.
1987 * The others are just ignored if passthrough mode is on.
1989 switch (msg->msg[1]) {
1990 case CEC_MSG_GET_CEC_VERSION:
1992 case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
1993 case CEC_MSG_GIVE_OSD_NAME:
1995 * These messages reply with a directed message, so ignore if
1996 * the initiator is Unregistered.
1998 if (!adap->passthrough && from_unregistered)
2001 case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
2002 case CEC_MSG_GIVE_FEATURES:
2003 case CEC_MSG_GIVE_PHYSICAL_ADDR:
2005 * Skip processing these messages if the passthrough mode
2008 if (adap->passthrough)
2009 goto skip_processing;
2010 /* Ignore if addressing is wrong */
2015 case CEC_MSG_USER_CONTROL_PRESSED:
2016 case CEC_MSG_USER_CONTROL_RELEASED:
2017 /* Wrong addressing mode: don't process */
2018 if (is_broadcast || from_unregistered)
2019 goto skip_processing;
2022 case CEC_MSG_REPORT_PHYSICAL_ADDR:
2024 * This message is always processed, regardless of the
2025 * passthrough setting.
2027 * Exception: don't process if wrong addressing mode.
2030 goto skip_processing;
2037 cec_msg_set_reply_to(&tx_cec_msg, msg);
2039 switch (msg->msg[1]) {
2040 /* The following messages are processed but still passed through */
2041 case CEC_MSG_REPORT_PHYSICAL_ADDR: {
2042 u16 pa = (msg->msg[2] << 8) | msg->msg[3];
2044 dprintk(1, "reported physical address %x.%x.%x.%x for logical address %d\n",
2045 cec_phys_addr_exp(pa), init_laddr);
2049 case CEC_MSG_USER_CONTROL_PRESSED:
2050 if (!(adap->capabilities & CEC_CAP_RC) ||
2051 !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU))
2054 #ifdef CONFIG_MEDIA_CEC_RC
2055 switch (msg->msg[2]) {
2057 * Play function, this message can have variable length
2058 * depending on the specific play function that is used.
2060 case CEC_OP_UI_CMD_PLAY_FUNCTION:
2062 rc_keydown(adap->rc, RC_PROTO_CEC,
2065 rc_keydown(adap->rc, RC_PROTO_CEC,
2066 msg->msg[2] << 8 | msg->msg[3], 0);
2069 * Other function messages that are not handled.
2070 * Currently the RC framework does not allow to supply an
2071 * additional parameter to a keypress. These "keys" contain
2072 * other information such as channel number, an input number
2074 * For the time being these messages are not processed by the
2075 * framework and are simply forwarded to the user space.
2077 case CEC_OP_UI_CMD_SELECT_BROADCAST_TYPE:
2078 case CEC_OP_UI_CMD_SELECT_SOUND_PRESENTATION:
2079 case CEC_OP_UI_CMD_TUNE_FUNCTION:
2080 case CEC_OP_UI_CMD_SELECT_MEDIA_FUNCTION:
2081 case CEC_OP_UI_CMD_SELECT_AV_INPUT_FUNCTION:
2082 case CEC_OP_UI_CMD_SELECT_AUDIO_INPUT_FUNCTION:
2085 rc_keydown(adap->rc, RC_PROTO_CEC, msg->msg[2], 0);
2091 case CEC_MSG_USER_CONTROL_RELEASED:
2092 if (!(adap->capabilities & CEC_CAP_RC) ||
2093 !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU))
2095 #ifdef CONFIG_MEDIA_CEC_RC
2101 * The remaining messages are only processed if the passthrough mode
2104 case CEC_MSG_GET_CEC_VERSION:
2105 cec_msg_cec_version(&tx_cec_msg, adap->log_addrs.cec_version);
2106 return cec_transmit_msg(adap, &tx_cec_msg, false);
2108 case CEC_MSG_GIVE_PHYSICAL_ADDR:
2109 /* Do nothing for CEC switches using addr 15 */
2110 if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH && dest_laddr == 15)
2112 cec_msg_report_physical_addr(&tx_cec_msg, adap->phys_addr, devtype);
2113 return cec_transmit_msg(adap, &tx_cec_msg, false);
2115 case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
2116 if (adap->log_addrs.vendor_id == CEC_VENDOR_ID_NONE)
2117 return cec_feature_abort(adap, msg);
2118 cec_msg_device_vendor_id(&tx_cec_msg, adap->log_addrs.vendor_id);
2119 return cec_transmit_msg(adap, &tx_cec_msg, false);
2122 /* Do nothing for CEC switches */
2123 if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH)
2125 return cec_feature_refused(adap, msg);
2127 case CEC_MSG_GIVE_OSD_NAME: {
2128 if (adap->log_addrs.osd_name[0] == 0)
2129 return cec_feature_abort(adap, msg);
2130 cec_msg_set_osd_name(&tx_cec_msg, adap->log_addrs.osd_name);
2131 return cec_transmit_msg(adap, &tx_cec_msg, false);
2134 case CEC_MSG_GIVE_FEATURES:
2135 if (adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0)
2136 return cec_feature_abort(adap, msg);
2137 cec_fill_msg_report_features(adap, &tx_cec_msg, la_idx);
2138 return cec_transmit_msg(adap, &tx_cec_msg, false);
2142 * Unprocessed messages are aborted if userspace isn't doing
2143 * any processing either.
2145 if (!is_broadcast && !is_reply && !adap->follower_cnt &&
2146 !adap->cec_follower && msg->msg[1] != CEC_MSG_FEATURE_ABORT)
2147 return cec_feature_abort(adap, msg);
2152 /* If this was a reply, then we're done, unless otherwise specified */
2153 if (is_reply && !(msg->flags & CEC_MSG_FL_REPLY_TO_FOLLOWERS))
2157 * Send to the exclusive follower if there is one, otherwise send
2160 if (adap->cec_follower)
2161 cec_queue_msg_fh(adap->cec_follower, msg);
2163 cec_queue_msg_followers(adap, msg);
2168 * Helper functions to keep track of the 'monitor all' use count.
2170 * These functions are called with adap->lock held.
2172 int cec_monitor_all_cnt_inc(struct cec_adapter *adap)
2176 if (adap->monitor_all_cnt++)
2179 ret = cec_adap_enable(adap);
2181 adap->monitor_all_cnt--;
2185 void cec_monitor_all_cnt_dec(struct cec_adapter *adap)
2187 if (WARN_ON(!adap->monitor_all_cnt))
2189 if (--adap->monitor_all_cnt)
2191 WARN_ON(call_op(adap, adap_monitor_all_enable, false));
2192 cec_adap_enable(adap);
2196 * Helper functions to keep track of the 'monitor pin' use count.
2198 * These functions are called with adap->lock held.
2200 int cec_monitor_pin_cnt_inc(struct cec_adapter *adap)
2204 if (adap->monitor_pin_cnt++)
2207 ret = cec_adap_enable(adap);
2209 adap->monitor_pin_cnt--;
2213 void cec_monitor_pin_cnt_dec(struct cec_adapter *adap)
2215 if (WARN_ON(!adap->monitor_pin_cnt))
2217 if (--adap->monitor_pin_cnt)
2219 WARN_ON(call_op(adap, adap_monitor_pin_enable, false));
2220 cec_adap_enable(adap);
2223 #ifdef CONFIG_DEBUG_FS
2225 * Log the current state of the CEC adapter.
2226 * Very useful for debugging.
2228 int cec_adap_status(struct seq_file *file, void *priv)
2230 struct cec_adapter *adap = dev_get_drvdata(file->private);
2231 struct cec_data *data;
2233 mutex_lock(&adap->lock);
2234 seq_printf(file, "enabled: %d\n", adap->is_enabled);
2235 seq_printf(file, "configured: %d\n", adap->is_configured);
2236 seq_printf(file, "configuring: %d\n", adap->is_configuring);
2237 seq_printf(file, "phys_addr: %x.%x.%x.%x\n",
2238 cec_phys_addr_exp(adap->phys_addr));
2239 seq_printf(file, "number of LAs: %d\n", adap->log_addrs.num_log_addrs);
2240 seq_printf(file, "LA mask: 0x%04x\n", adap->log_addrs.log_addr_mask);
2241 if (adap->cec_follower)
2242 seq_printf(file, "has CEC follower%s\n",
2243 adap->passthrough ? " (in passthrough mode)" : "");
2244 if (adap->cec_initiator)
2245 seq_puts(file, "has CEC initiator\n");
2246 if (adap->monitor_all_cnt)
2247 seq_printf(file, "file handles in Monitor All mode: %u\n",
2248 adap->monitor_all_cnt);
2249 if (adap->monitor_pin_cnt)
2250 seq_printf(file, "file handles in Monitor Pin mode: %u\n",
2251 adap->monitor_pin_cnt);
2252 if (adap->tx_timeouts) {
2253 seq_printf(file, "transmit timeouts: %u\n",
2255 adap->tx_timeouts = 0;
2257 data = adap->transmitting;
2259 seq_printf(file, "transmitting message: %*ph (reply: %02x, timeout: %ums)\n",
2260 data->msg.len, data->msg.msg, data->msg.reply,
2262 seq_printf(file, "pending transmits: %u\n", adap->transmit_queue_sz);
2263 list_for_each_entry(data, &adap->transmit_queue, list) {
2264 seq_printf(file, "queued tx message: %*ph (reply: %02x, timeout: %ums)\n",
2265 data->msg.len, data->msg.msg, data->msg.reply,
2268 list_for_each_entry(data, &adap->wait_queue, list) {
2269 seq_printf(file, "message waiting for reply: %*ph (reply: %02x, timeout: %ums)\n",
2270 data->msg.len, data->msg.msg, data->msg.reply,
2274 call_void_op(adap, adap_status, file);
2275 mutex_unlock(&adap->lock);