drivers/macintosh/adbhid.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * drivers/macintosh/adbhid.c
   4  *
   5  * ADB HID driver for Power Macintosh computers.
   6  *
   7  * Adapted from drivers/macintosh/mac_keyb.c by Franz Sirl.
   8  * drivers/macintosh/mac_keyb.c was Copyright (C) 1996 Paul Mackerras
   9  * with considerable contributions from Ben Herrenschmidt and others.
  10  *
  11  * Copyright (C) 2000 Franz Sirl.
  12  *
  13  * Adapted to ADB changes and support for more devices by
  14  * Benjamin Herrenschmidt. Adapted from code in MkLinux
  15  * and reworked.
  16  *
  17  * Supported devices:
  18  *
  19  * - Standard 1 button mouse
  20  * - All standard Apple Extended protocol (handler ID 4)
  21  * - mouseman and trackman mice & trackballs
  22  * - PowerBook Trackpad (default setup: enable tapping)
  23  * - MicroSpeed mouse & trackball (needs testing)
  24  * - CH Products Trackball Pro (needs testing)
  25  * - Contour Design (Contour Mouse)
  26  * - Hunter digital (NoHandsMouse)
  27  * - Kensignton TurboMouse 5 (needs testing)
  28  * - Mouse Systems A3 mice and trackballs <aidan@kublai.com>
  29  * - MacAlly 2-buttons mouse (needs testing) <pochini@denise.shiny.it>
  30  *
  31  * To do:
  32  *
  33  * Improve Kensington support.
  34  * Split mouse/kbd
  35  * Move to syfs
  36  */
  37
  38 #include <linux/module.h>
  39 #include <linux/slab.h>
  40 #include <linux/init.h>
  41 #include <linux/notifier.h>
  42 #include <linux/input.h>
  43
  44 #include <linux/adb.h>
  45 #include <linux/cuda.h>
  46 #include <linux/pmu.h>
  47
  48 #include <asm/machdep.h>
  49 #ifdef CONFIG_PPC_PMAC
  50 #include <asm/backlight.h>
  51 #include <asm/pmac_feature.h>
  52 #endif
  53
  54 MODULE_AUTHOR("Franz Sirl <Franz.Sirl-kernel@lauterbach.com>");
  55
  56 static int restore_capslock_events;
  57 module_param(restore_capslock_events, int, 0644);
  58 MODULE_PARM_DESC(restore_capslock_events,
  59         "Produce keypress events for capslock on both keyup and keydown.");
  60
  61 #define KEYB_KEYREG     0       /* register # for key up/down data */
  62 #define KEYB_LEDREG     2       /* register # for leds on ADB keyboard */
  63 #define MOUSE_DATAREG   0       /* reg# for movement/button codes from mouse */
  64
  65 static int adb_message_handler(struct notifier_block *, unsigned long, void *);
  66 static struct notifier_block adbhid_adb_notifier = {
  67         .notifier_call  = adb_message_handler,
  68 };
  69
  70 /* Some special keys */
  71 #define ADB_KEY_DEL             0x33
  72 #define ADB_KEY_CMD             0x37
  73 #define ADB_KEY_CAPSLOCK        0x39
  74 #define ADB_KEY_FN              0x3f
  75 #define ADB_KEY_FWDEL           0x75
  76 #define ADB_KEY_POWER_OLD       0x7e
  77 #define ADB_KEY_POWER           0x7f
  78
  79 static const u16 adb_to_linux_keycodes[128] = {
  80         /* 0x00 */ KEY_A,               /*  30 */
  81         /* 0x01 */ KEY_S,               /*  31 */
  82         /* 0x02 */ KEY_D,               /*  32 */
  83         /* 0x03 */ KEY_F,               /*  33 */
  84         /* 0x04 */ KEY_H,               /*  35 */
  85         /* 0x05 */ KEY_G,               /*  34 */
  86         /* 0x06 */ KEY_Z,               /*  44 */
  87         /* 0x07 */ KEY_X,               /*  45 */
  88         /* 0x08 */ KEY_C,               /*  46 */
  89         /* 0x09 */ KEY_V,               /*  47 */
  90         /* 0x0a */ KEY_102ND,           /*  86 */
  91         /* 0x0b */ KEY_B,               /*  48 */
  92         /* 0x0c */ KEY_Q,               /*  16 */
  93         /* 0x0d */ KEY_W,               /*  17 */
  94         /* 0x0e */ KEY_E,               /*  18 */
  95         /* 0x0f */ KEY_R,               /*  19 */
  96         /* 0x10 */ KEY_Y,               /*  21 */
  97         /* 0x11 */ KEY_T,               /*  20 */
  98         /* 0x12 */ KEY_1,               /*   2 */
  99         /* 0x13 */ KEY_2,               /*   3 */
 100         /* 0x14 */ KEY_3,               /*   4 */
 101         /* 0x15 */ KEY_4,               /*   5 */
 102         /* 0x16 */ KEY_6,               /*   7 */
 103         /* 0x17 */ KEY_5,               /*   6 */
 104         /* 0x18 */ KEY_EQUAL,           /*  13 */
 105         /* 0x19 */ KEY_9,               /*  10 */
 106         /* 0x1a */ KEY_7,               /*   8 */
 107         /* 0x1b */ KEY_MINUS,           /*  12 */
 108         /* 0x1c */ KEY_8,               /*   9 */
 109         /* 0x1d */ KEY_0,               /*  11 */
 110         /* 0x1e */ KEY_RIGHTBRACE,      /*  27 */
 111         /* 0x1f */ KEY_O,               /*  24 */
 112         /* 0x20 */ KEY_U,               /*  22 */
 113         /* 0x21 */ KEY_LEFTBRACE,       /*  26 */
 114         /* 0x22 */ KEY_I,               /*  23 */
 115         /* 0x23 */ KEY_P,               /*  25 */
 116         /* 0x24 */ KEY_ENTER,           /*  28 */
 117         /* 0x25 */ KEY_L,               /*  38 */
 118         /* 0x26 */ KEY_J,               /*  36 */
 119         /* 0x27 */ KEY_APOSTROPHE,      /*  40 */
 120         /* 0x28 */ KEY_K,               /*  37 */
 121         /* 0x29 */ KEY_SEMICOLON,       /*  39 */
 122         /* 0x2a */ KEY_BACKSLASH,       /*  43 */
 123         /* 0x2b */ KEY_COMMA,           /*  51 */
 124         /* 0x2c */ KEY_SLASH,           /*  53 */
 125         /* 0x2d */ KEY_N,               /*  49 */
 126         /* 0x2e */ KEY_M,               /*  50 */
 127         /* 0x2f */ KEY_DOT,             /*  52 */
 128         /* 0x30 */ KEY_TAB,             /*  15 */
 129         /* 0x31 */ KEY_SPACE,           /*  57 */
 130         /* 0x32 */ KEY_GRAVE,           /*  41 */
 131         /* 0x33 */ KEY_BACKSPACE,       /*  14 */
 132         /* 0x34 */ KEY_KPENTER,         /*  96 */
 133         /* 0x35 */ KEY_ESC,             /*   1 */
 134         /* 0x36 */ KEY_LEFTCTRL,        /*  29 */
 135         /* 0x37 */ KEY_LEFTMETA,        /* 125 */
 136         /* 0x38 */ KEY_LEFTSHIFT,       /*  42 */
 137         /* 0x39 */ KEY_CAPSLOCK,        /*  58 */
 138         /* 0x3a */ KEY_LEFTALT,         /*  56 */
 139         /* 0x3b */ KEY_LEFT,            /* 105 */
 140         /* 0x3c */ KEY_RIGHT,           /* 106 */
 141         /* 0x3d */ KEY_DOWN,            /* 108 */
 142         /* 0x3e */ KEY_UP,              /* 103 */
 143         /* 0x3f */ KEY_FN,              /* 0x1d0 */
 144         /* 0x40 */ 0,
 145         /* 0x41 */ KEY_KPDOT,           /*  83 */
 146         /* 0x42 */ 0,
 147         /* 0x43 */ KEY_KPASTERISK,      /*  55 */
 148         /* 0x44 */ 0,
 149         /* 0x45 */ KEY_KPPLUS,          /*  78 */
 150         /* 0x46 */ 0,
 151         /* 0x47 */ KEY_NUMLOCK,         /*  69 */
 152         /* 0x48 */ 0,
 153         /* 0x49 */ 0,
 154         /* 0x4a */ 0,
 155         /* 0x4b */ KEY_KPSLASH,         /*  98 */
 156         /* 0x4c */ KEY_KPENTER,         /*  96 */
 157         /* 0x4d */ 0,
 158         /* 0x4e */ KEY_KPMINUS,         /*  74 */
 159         /* 0x4f */ 0,
 160         /* 0x50 */ 0,
 161         /* 0x51 */ KEY_KPEQUAL,         /* 117 */
 162         /* 0x52 */ KEY_KP0,             /*  82 */
 163         /* 0x53 */ KEY_KP1,             /*  79 */
 164         /* 0x54 */ KEY_KP2,             /*  80 */
 165         /* 0x55 */ KEY_KP3,             /*  81 */
 166         /* 0x56 */ KEY_KP4,             /*  75 */
 167         /* 0x57 */ KEY_KP5,             /*  76 */
 168         /* 0x58 */ KEY_KP6,             /*  77 */
 169         /* 0x59 */ KEY_KP7,             /*  71 */
 170         /* 0x5a */ 0,
 171         /* 0x5b */ KEY_KP8,             /*  72 */
 172         /* 0x5c */ KEY_KP9,             /*  73 */
 173         /* 0x5d */ KEY_YEN,             /* 124 */
 174         /* 0x5e */ KEY_RO,              /*  89 */
 175         /* 0x5f */ KEY_KPCOMMA,         /* 121 */
 176         /* 0x60 */ KEY_F5,              /*  63 */
 177         /* 0x61 */ KEY_F6,              /*  64 */
 178         /* 0x62 */ KEY_F7,              /*  65 */
 179         /* 0x63 */ KEY_F3,              /*  61 */
 180         /* 0x64 */ KEY_F8,              /*  66 */
 181         /* 0x65 */ KEY_F9,              /*  67 */
 182         /* 0x66 */ KEY_HANJA,           /* 123 */
 183         /* 0x67 */ KEY_F11,             /*  87 */
 184         /* 0x68 */ KEY_HANGEUL,         /* 122 */
 185         /* 0x69 */ KEY_SYSRQ,           /*  99 */
 186         /* 0x6a */ 0,
 187         /* 0x6b */ KEY_SCROLLLOCK,      /*  70 */
 188         /* 0x6c */ 0,
 189         /* 0x6d */ KEY_F10,             /*  68 */
 190         /* 0x6e */ KEY_COMPOSE,         /* 127 */
 191         /* 0x6f */ KEY_F12,             /*  88 */
 192         /* 0x70 */ 0,
 193         /* 0x71 */ KEY_PAUSE,           /* 119 */
 194         /* 0x72 */ KEY_INSERT,          /* 110 */
 195         /* 0x73 */ KEY_HOME,            /* 102 */
 196         /* 0x74 */ KEY_PAGEUP,          /* 104 */
 197         /* 0x75 */ KEY_DELETE,          /* 111 */
 198         /* 0x76 */ KEY_F4,              /*  62 */
 199         /* 0x77 */ KEY_END,             /* 107 */
 200         /* 0x78 */ KEY_F2,              /*  60 */
 201         /* 0x79 */ KEY_PAGEDOWN,        /* 109 */
 202         /* 0x7a */ KEY_F1,              /*  59 */
 203         /* 0x7b */ KEY_RIGHTSHIFT,      /*  54 */
 204         /* 0x7c */ KEY_RIGHTALT,        /* 100 */
 205         /* 0x7d */ KEY_RIGHTCTRL,       /*  97 */
 206         /* 0x7e */ KEY_RIGHTMETA,       /* 126 */
 207         /* 0x7f */ KEY_POWER,           /* 116 */
 208 };
 209
 210 struct adbhid {
 211         struct input_dev *input;
 212         int id;
 213         int default_id;
 214         int original_handler_id;
 215         int current_handler_id;
 216         int mouse_kind;
 217         u16 *keycode;
 218         char name[64];
 219         char phys[32];
 220         int flags;
 221 };
 222
 223 #define FLAG_FN_KEY_PRESSED             0x00000001
 224 #define FLAG_POWER_FROM_FN              0x00000002
 225 #define FLAG_EMU_FWDEL_DOWN             0x00000004
 226 #define FLAG_CAPSLOCK_TRANSLATE         0x00000008
 227 #define FLAG_CAPSLOCK_DOWN              0x00000010
 228 #define FLAG_CAPSLOCK_IGNORE_NEXT       0x00000020
 229 #define FLAG_POWER_KEY_PRESSED          0x00000040
 230
 231 static struct adbhid *adbhid[16];
 232
 233 static void adbhid_probe(void);
 234
 235 static void adbhid_input_keycode(int, int, int);
 236
 237 static void init_trackpad(int id);
 238 static void init_trackball(int id);
 239 static void init_turbomouse(int id);
 240 static void init_microspeed(int id);
 241 static void init_ms_a3(int id);
 242
 243 static struct adb_ids keyboard_ids;
 244 static struct adb_ids mouse_ids;
 245 static struct adb_ids buttons_ids;
 246
 247 /* Kind of keyboard, see Apple technote 1152  */
 248 #define ADB_KEYBOARD_UNKNOWN    0
 249 #define ADB_KEYBOARD_ANSI       0x0100
 250 #define ADB_KEYBOARD_ISO        0x0200
 251 #define ADB_KEYBOARD_JIS        0x0300
 252
 253 /* Kind of mouse  */
 254 #define ADBMOUSE_STANDARD_100   0       /* Standard 100cpi mouse (handler 1) */
 255 #define ADBMOUSE_STANDARD_200   1       /* Standard 200cpi mouse (handler 2) */
 256 #define ADBMOUSE_EXTENDED       2       /* Apple Extended mouse (handler 4) */
 257 #define ADBMOUSE_TRACKBALL      3       /* TrackBall (handler 4) */
 258 #define ADBMOUSE_TRACKPAD       4       /* Apple's PowerBook trackpad (handler 4) */
 259 #define ADBMOUSE_TURBOMOUSE5    5       /* Turbomouse 5 (previously req. mousehack) */
 260 #define ADBMOUSE_MICROSPEED     6       /* Microspeed mouse (&trackball ?), MacPoint */
 261 #define ADBMOUSE_TRACKBALLPRO   7       /* Trackball Pro (special buttons) */
 262 #define ADBMOUSE_MS_A3          8       /* Mouse systems A3 trackball (handler 3) */
 263 #define ADBMOUSE_MACALLY2       9       /* MacAlly 2-button mouse */
 264
 265 static void
 266 adbhid_keyboard_input(unsigned char *data, int nb, int apoll)
 267 {
 268         int id = (data[0] >> 4) & 0x0f;
 269
 270         if (!adbhid[id]) {
 271                 printk(KERN_ERR "ADB HID on ID %d not yet registered, packet %#02x, %#02x, %#02x, %#02x\n",
 272                        id, data[0], data[1], data[2], data[3]);
 273                 return;
 274         }
 275
 276         /* first check this is from register 0 */
 277         if (nb != 3 || (data[0] & 3) != KEYB_KEYREG)
 278                 return;         /* ignore it */
 279         adbhid_input_keycode(id, data[1], 0);
 280         if (!(data[2] == 0xff || (data[2] == 0x7f && data[1] == 0x7f)))
 281                 adbhid_input_keycode(id, data[2], 0);
 282 }
 283
 284 static void
 285 adbhid_input_keycode(int id, int scancode, int repeat)
 286 {
 287         struct adbhid *ahid = adbhid[id];
 288         int keycode, up_flag, key;
 289
 290         keycode = scancode & 0x7f;
 291         up_flag = scancode & 0x80;
 292
 293         if (restore_capslock_events) {
 294                 if (keycode == ADB_KEY_CAPSLOCK && !up_flag) {
 295                         /* Key pressed, turning on the CapsLock LED.
 296                          * The next 0xff will be interpreted as a release. */
 297                         if (ahid->flags & FLAG_CAPSLOCK_IGNORE_NEXT) {
 298                                 /* Throw away this key event if it happens
 299                                  * just after resume. */
 300                                 ahid->flags &= ~FLAG_CAPSLOCK_IGNORE_NEXT;
 301                                 return;
 302                         } else {
 303                                 ahid->flags |= FLAG_CAPSLOCK_TRANSLATE
 304                                         | FLAG_CAPSLOCK_DOWN;
 305                         }
 306                 } else if (scancode == 0xff &&
 307                            !(ahid->flags & FLAG_POWER_KEY_PRESSED)) {
 308                         /* Scancode 0xff usually signifies that the capslock
 309                          * key was either pressed or released, or that the
 310                          * power button was released. */
 311                         if (ahid->flags & FLAG_CAPSLOCK_TRANSLATE) {
 312                                 keycode = ADB_KEY_CAPSLOCK;
 313                                 if (ahid->flags & FLAG_CAPSLOCK_DOWN) {
 314                                         /* Key released */
 315                                         up_flag = 1;
 316                                         ahid->flags &= ~FLAG_CAPSLOCK_DOWN;
 317                                 } else {
 318                                         /* Key pressed */
 319                                         up_flag = 0;
 320                                         ahid->flags &= ~FLAG_CAPSLOCK_TRANSLATE;
 321                                 }
 322                         } else {
 323                                 printk(KERN_INFO "Spurious caps lock event "
 324                                                  "(scancode 0xff).\n");
 325                         }
 326                 }
 327         }
 328
 329         switch (keycode) {
 330         case ADB_KEY_CAPSLOCK:
 331                 if (!restore_capslock_events) {
 332                         /* Generate down/up events for CapsLock every time. */
 333                         input_report_key(ahid->input, KEY_CAPSLOCK, 1);
 334                         input_sync(ahid->input);
 335                         input_report_key(ahid->input, KEY_CAPSLOCK, 0);
 336                         input_sync(ahid->input);
 337                         return;
 338                 }
 339                 break;
 340 #ifdef CONFIG_PPC_PMAC
 341         case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */
 342                 switch(pmac_call_feature(PMAC_FTR_GET_MB_INFO,
 343                         NULL, PMAC_MB_INFO_MODEL, 0)) {
 344                 case PMAC_TYPE_COMET:
 345                 case PMAC_TYPE_HOOPER:
 346                 case PMAC_TYPE_KANGA:
 347                         keycode = ADB_KEY_POWER;
 348                 }
 349                 break;
 350         case ADB_KEY_POWER:
 351                 /* Keep track of the power key state */
 352                 if (up_flag)
 353                         ahid->flags &= ~FLAG_POWER_KEY_PRESSED;
 354                 else
 355                         ahid->flags |= FLAG_POWER_KEY_PRESSED;
 356
 357                 /* Fn + Command will produce a bogus "power" keycode */
 358                 if (ahid->flags & FLAG_FN_KEY_PRESSED) {
 359                         keycode = ADB_KEY_CMD;
 360                         if (up_flag)
 361                                 ahid->flags &= ~FLAG_POWER_FROM_FN;
 362                         else
 363                                 ahid->flags |= FLAG_POWER_FROM_FN;
 364                 } else if (ahid->flags & FLAG_POWER_FROM_FN) {
 365                         keycode = ADB_KEY_CMD;
 366                         ahid->flags &= ~FLAG_POWER_FROM_FN;
 367                 }
 368                 break;
 369         case ADB_KEY_FN:
 370                 /* Keep track of the Fn key state */
 371                 if (up_flag) {
 372                         ahid->flags &= ~FLAG_FN_KEY_PRESSED;
 373                         /* Emulate Fn+delete = forward delete */
 374                         if (ahid->flags & FLAG_EMU_FWDEL_DOWN) {
 375                                 ahid->flags &= ~FLAG_EMU_FWDEL_DOWN;
 376                                 keycode = ADB_KEY_FWDEL;
 377                                 break;
 378                         }
 379                 } else
 380                         ahid->flags |= FLAG_FN_KEY_PRESSED;
 381                 break;
 382         case ADB_KEY_DEL:
 383                 /* Emulate Fn+delete = forward delete */
 384                 if (ahid->flags & FLAG_FN_KEY_PRESSED) {
 385                         keycode = ADB_KEY_FWDEL;
 386                         if (up_flag)
 387                                 ahid->flags &= ~FLAG_EMU_FWDEL_DOWN;
 388                         else
 389                                 ahid->flags |= FLAG_EMU_FWDEL_DOWN;
 390                 }
 391                 break;
 392 #endif /* CONFIG_PPC_PMAC */
 393         }
 394
 395         key = adbhid[id]->keycode[keycode];
 396         if (key) {
 397                 input_report_key(adbhid[id]->input, key, !up_flag);
 398                 input_sync(adbhid[id]->input);
 399         } else
 400                 printk(KERN_INFO "Unhandled ADB key (scancode %#02x) %s.\n", keycode,
 401                        up_flag ? "released" : "pressed");
 402
 403 }
 404
 405 static void
 406 adbhid_mouse_input(unsigned char *data, int nb, int autopoll)
 407 {
 408         int id = (data[0] >> 4) & 0x0f;
 409
 410         if (!adbhid[id]) {
 411                 printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id);
 412                 return;
 413         }
 414
 415   /*
 416     Handler 1 -- 100cpi original Apple mouse protocol.
 417     Handler 2 -- 200cpi original Apple mouse protocol.
 418
 419     For Apple's standard one-button mouse protocol the data array will
 420     contain the following values:
 421
 422                 BITS    COMMENTS
 423     data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
 424     data[1] = bxxx xxxx First button and x-axis motion.
 425     data[2] = byyy yyyy Second button and y-axis motion.
 426
 427     Handler 4 -- Apple Extended mouse protocol.
 428
 429     For Apple's 3-button mouse protocol the data array will contain the
 430     following values:
 431
 432                 BITS    COMMENTS
 433     data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
 434     data[1] = bxxx xxxx Left button and x-axis motion.
 435     data[2] = byyy yyyy Second button and y-axis motion.
 436     data[3] = byyy bxxx Third button and fourth button.  Y is additional
 437               high bits of y-axis motion.  XY is additional
 438               high bits of x-axis motion.
 439
 440     MacAlly 2-button mouse protocol.
 441
 442     For MacAlly 2-button mouse protocol the data array will contain the
 443     following values:
 444
 445                 BITS    COMMENTS
 446     data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
 447     data[1] = bxxx xxxx Left button and x-axis motion.
 448     data[2] = byyy yyyy Right button and y-axis motion.
 449     data[3] = ???? ???? unknown
 450     data[4] = ???? ???? unknown
 451
 452   */
 453
 454         /* If it's a trackpad, we alias the second button to the first.
 455            NOTE: Apple sends an ADB flush command to the trackpad when
 456                  the first (the real) button is released. We could do
 457                  this here using async flush requests.
 458         */
 459         switch (adbhid[id]->mouse_kind)
 460         {
 461             case ADBMOUSE_TRACKPAD:
 462                 data[1] = (data[1] & 0x7f) | ((data[1] & data[2]) & 0x80);
 463                 data[2] = data[2] | 0x80;
 464                 break;
 465             case ADBMOUSE_MICROSPEED:
 466                 data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7);
 467                 data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6);
 468                 data[3] = (data[3] & 0x77) | ((data[3] & 0x04) << 5)
 469                         | (data[3] & 0x08);
 470                 break;
 471             case ADBMOUSE_TRACKBALLPRO:
 472                 data[1] = (data[1] & 0x7f) | (((data[3] & 0x04) << 5)
 473                         & ((data[3] & 0x08) << 4));
 474                 data[2] = (data[2] & 0x7f) | ((data[3] & 0x01) << 7);
 475                 data[3] = (data[3] & 0x77) | ((data[3] & 0x02) << 6);
 476                 break;
 477             case ADBMOUSE_MS_A3:
 478                 data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7);
 479                 data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6);
 480                 data[3] = ((data[3] & 0x04) << 5);
 481                 break;
 482             case ADBMOUSE_MACALLY2:
 483                 data[3] = (data[2] & 0x80) ? 0x80 : 0x00;
 484                 data[2] |= 0x80;  /* Right button is mapped as button 3 */
 485                 nb=4;
 486                 break;
 487         }
 488
 489         input_report_key(adbhid[id]->input, BTN_LEFT,   !((data[1] >> 7) & 1));
 490         input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1));
 491
 492         if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD)
 493                 input_report_key(adbhid[id]->input, BTN_RIGHT,  !((data[3] >> 7) & 1));
 494
 495         input_report_rel(adbhid[id]->input, REL_X,
 496                          ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 ));
 497         input_report_rel(adbhid[id]->input, REL_Y,
 498                          ((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 ));
 499
 500         input_sync(adbhid[id]->input);
 501 }
 502
 503 static void
 504 adbhid_buttons_input(unsigned char *data, int nb, int autopoll)
 505 {
 506         int id = (data[0] >> 4) & 0x0f;
 507
 508         if (!adbhid[id]) {
 509                 printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id);
 510                 return;
 511         }
 512
 513         switch (adbhid[id]->original_handler_id) {
 514         default:
 515         case 0x02: /* Adjustable keyboard button device */
 516           {
 517                 int down = (data[1] == (data[1] & 0xf));
 518
 519                 switch (data[1] & 0x0f) {
 520                 case 0x0:       /* microphone */
 521                         input_report_key(adbhid[id]->input, KEY_SOUND, down);
 522                         break;
 523
 524                 case 0x1:       /* mute */
 525                         input_report_key(adbhid[id]->input, KEY_MUTE, down);
 526                         break;
 527
 528                 case 0x2:       /* volume decrease */
 529                         input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
 530                         break;
 531
 532                 case 0x3:       /* volume increase */
 533                         input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
 534                         break;
 535
 536                 default:
 537                         printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
 538                                data[0], data[1], data[2], data[3]);
 539                         break;
 540                 }
 541           }
 542           break;
 543
 544         case 0x1f: /* Powerbook button device */
 545           {
 546                 int down = (data[1] == (data[1] & 0xf));
 547
 548                 /*
 549                  * XXX: Where is the contrast control for the passive?
 550                  *  -- Cort
 551                  */
 552
 553                 switch (data[1] & 0x0f) {
 554                 case 0x8:       /* mute */
 555                         input_report_key(adbhid[id]->input, KEY_MUTE, down);
 556                         break;
 557
 558                 case 0x7:       /* volume decrease */
 559                         input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
 560                         break;
 561
 562                 case 0x6:       /* volume increase */
 563                         input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
 564                         break;
 565
 566                 case 0xb:       /* eject */
 567                         input_report_key(adbhid[id]->input, KEY_EJECTCD, down);
 568                         break;
 569
 570                 case 0xa:       /* brightness decrease */
 571 #ifdef CONFIG_PMAC_BACKLIGHT
 572                         if (down)
 573                                 pmac_backlight_key_down();
 574 #endif
 575                         input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down);
 576                         break;
 577
 578                 case 0x9:       /* brightness increase */
 579 #ifdef CONFIG_PMAC_BACKLIGHT
 580                         if (down)
 581                                 pmac_backlight_key_up();
 582 #endif
 583                         input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down);
 584                         break;
 585
 586                 case 0xc:       /* videomode switch */
 587                         input_report_key(adbhid[id]->input, KEY_SWITCHVIDEOMODE, down);
 588                         break;
 589
 590                 case 0xd:       /* keyboard illumination toggle */
 591                         input_report_key(adbhid[id]->input, KEY_KBDILLUMTOGGLE, down);
 592                         break;
 593
 594                 case 0xe:       /* keyboard illumination decrease */
 595                         input_report_key(adbhid[id]->input, KEY_KBDILLUMDOWN, down);
 596                         break;
 597
 598                 case 0xf:
 599                         switch (data[1]) {
 600                         case 0x8f:
 601                         case 0x0f:
 602                                 /* keyboard illumination increase */
 603                                 input_report_key(adbhid[id]->input, KEY_KBDILLUMUP, down);
 604                                 break;
 605
 606                         case 0x7f:
 607                         case 0xff:
 608                                 /* keypad overlay toogle */
 609                                 break;
 610
 611                         default:
 612                                 printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
 613                                        data[0], data[1], data[2], data[3]);
 614                                 break;
 615                         }
 616                         break;
 617                 default:
 618                         printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
 619                                data[0], data[1], data[2], data[3]);
 620                         break;
 621                 }
 622           }
 623           break;
 624         }
 625
 626         input_sync(adbhid[id]->input);
 627 }
 628
 629 static struct adb_request led_request;
 630 static int leds_pending[16];
 631 static int leds_req_pending;
 632 static int pending_devs[16];
 633 static int pending_led_start;
 634 static int pending_led_end;
 635 static DEFINE_SPINLOCK(leds_lock);
 636
 637 static void leds_done(struct adb_request *req)
 638 {
 639         int leds = 0, device = 0, pending = 0;
 640         unsigned long flags;
 641
 642         spin_lock_irqsave(&leds_lock, flags);
 643
 644         if (pending_led_start != pending_led_end) {
 645                 device = pending_devs[pending_led_start];
 646                 leds = leds_pending[device] & 0xff;
 647                 leds_pending[device] = 0;
 648                 pending_led_start++;
 649                 pending_led_start = (pending_led_start < 16) ? pending_led_start : 0;
 650                 pending = leds_req_pending;
 651         } else
 652                 leds_req_pending = 0;
 653         spin_unlock_irqrestore(&leds_lock, flags);
 654         if (pending)
 655                 adb_request(&led_request, leds_done, 0, 3,
 656                             ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds);
 657 }
 658
 659 static void real_leds(unsigned char leds, int device)
 660 {
 661         unsigned long flags;
 662
 663         spin_lock_irqsave(&leds_lock, flags);
 664         if (!leds_req_pending) {
 665                 leds_req_pending = 1;
 666                 spin_unlock_irqrestore(&leds_lock, flags);
 667                 adb_request(&led_request, leds_done, 0, 3,
 668                             ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds);
 669                 return;
 670         } else {
 671                 if (!(leds_pending[device] & 0x100)) {
 672                         pending_devs[pending_led_end] = device;
 673                         pending_led_end++;
 674                         pending_led_end = (pending_led_end < 16) ? pending_led_end : 0;
 675                 }
 676                 leds_pending[device] = leds | 0x100;
 677         }
 678         spin_unlock_irqrestore(&leds_lock, flags);
 679 }
 680
 681 /*
 682  * Event callback from the input module. Events that change the state of
 683  * the hardware are processed here.
 684  */
 685 static int adbhid_kbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 686 {
 687         struct adbhid *adbhid = input_get_drvdata(dev);
 688         unsigned char leds;
 689
 690         switch (type) {
 691         case EV_LED:
 692                 leds =  (test_bit(LED_SCROLLL, dev->led) ? 4 : 0) |
 693                         (test_bit(LED_NUML,    dev->led) ? 1 : 0) |
 694                         (test_bit(LED_CAPSL,   dev->led) ? 2 : 0);
 695                 real_leds(leds, adbhid->id);
 696                 return 0;
 697         }
 698
 699         return -1;
 700 }
 701
 702 static void
 703 adbhid_kbd_capslock_remember(void)
 704 {
 705         struct adbhid *ahid;
 706         int i;
 707
 708         for (i = 1; i < 16; i++) {
 709                 ahid = adbhid[i];
 710
 711                 if (ahid && ahid->id == ADB_KEYBOARD)
 712                         if (ahid->flags & FLAG_CAPSLOCK_TRANSLATE)
 713                                 ahid->flags |= FLAG_CAPSLOCK_IGNORE_NEXT;
 714         }
 715 }
 716
 717 static int
 718 adb_message_handler(struct notifier_block *this, unsigned long code, void *x)
 719 {
 720         switch (code) {
 721         case ADB_MSG_PRE_RESET:
 722         case ADB_MSG_POWERDOWN:
 723                 /* Stop the repeat timer. Autopoll is already off at this point */
 724                 {
 725                         int i;
 726                         for (i = 1; i < 16; i++) {
 727                                 if (adbhid[i])
 728                                         del_timer_sync(&adbhid[i]->input->timer);
 729                         }
 730                 }
 731
 732                 /* Stop pending led requests */
 733                 while (leds_req_pending)
 734                         adb_poll();
 735
 736                 /* After resume, and if the capslock LED is on, the PMU will
 737                  * send a "capslock down" key event. This confuses the
 738                  * restore_capslock_events logic. Remember if the capslock
 739                  * LED was on before suspend so the unwanted key event can
 740                  * be ignored after resume. */
 741                 if (restore_capslock_events)
 742                         adbhid_kbd_capslock_remember();
 743
 744                 break;
 745
 746         case ADB_MSG_POST_RESET:
 747                 adbhid_probe();
 748                 break;
 749         }
 750         return NOTIFY_DONE;
 751 }
 752
 753 static int
 754 adbhid_input_register(int id, int default_id, int original_handler_id,
 755                       int current_handler_id, int mouse_kind)
 756 {
 757         struct adbhid *hid;
 758         struct input_dev *input_dev;
 759         int err;
 760         int i;
 761
 762         if (adbhid[id]) {
 763                 printk(KERN_ERR "Trying to reregister ADB HID on ID %d\n", id);
 764                 return -EEXIST;
 765         }
 766
 767         adbhid[id] = hid = kzalloc(sizeof(struct adbhid), GFP_KERNEL);
 768         input_dev = input_allocate_device();
 769         if (!hid || !input_dev) {
 770                 err = -ENOMEM;
 771                 goto fail;
 772         }
 773
 774         sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id);
 775
 776         hid->input = input_dev;
 777         hid->id = default_id;
 778         hid->original_handler_id = original_handler_id;
 779         hid->current_handler_id = current_handler_id;
 780         hid->mouse_kind = mouse_kind;
 781         hid->flags = 0;
 782         input_set_drvdata(input_dev, hid);
 783         input_dev->name = hid->name;
 784         input_dev->phys = hid->phys;
 785         input_dev->id.bustype = BUS_ADB;
 786         input_dev->id.vendor = 0x0001;
 787         input_dev->id.product = (id << 12) | (default_id << 8) | original_handler_id;
 788         input_dev->id.version = 0x0100;
 789
 790         switch (default_id) {
 791         case ADB_KEYBOARD:
 792                 hid->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL);
 793                 if (!hid->keycode) {
 794                         err = -ENOMEM;
 795                         goto fail;
 796                 }
 797
 798                 sprintf(hid->name, "ADB keyboard");
 799
 800                 memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes));
 801
 802                 printk(KERN_INFO "Detected ADB keyboard, type ");
 803                 switch (original_handler_id) {
 804                 default:
 805                         printk("<unknown>.\n");
 806                         input_dev->id.version = ADB_KEYBOARD_UNKNOWN;
 807                         break;
 808
 809                 case 0x01: case 0x02: case 0x03: case 0x06: case 0x08:
 810                 case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C:
 811                 case 0xC0: case 0xC3: case 0xC6:
 812                         printk("ANSI.\n");
 813                         input_dev->id.version = ADB_KEYBOARD_ANSI;
 814                         break;
 815
 816                 case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D:
 817                 case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1:
 818                 case 0xC4: case 0xC7:
 819                         printk("ISO, swapping keys.\n");
 820                         input_dev->id.version = ADB_KEYBOARD_ISO;
 821                         i = hid->keycode[10];
 822                         hid->keycode[10] = hid->keycode[50];
 823                         hid->keycode[50] = i;
 824                         break;
 825
 826                 case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A:
 827                 case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9:
 828                         printk("JIS.\n");
 829                         input_dev->id.version = ADB_KEYBOARD_JIS;
 830                         break;
 831                 }
 832
 833                 for (i = 0; i < 128; i++)
 834                         if (hid->keycode[i])
 835                                 set_bit(hid->keycode[i], input_dev->keybit);
 836
 837                 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_LED) |
 838                         BIT_MASK(EV_REP);
 839                 input_dev->ledbit[0] = BIT_MASK(LED_SCROLLL) |
 840                         BIT_MASK(LED_CAPSL) | BIT_MASK(LED_NUML);
 841                 input_dev->event = adbhid_kbd_event;
 842                 input_dev->keycodemax = KEY_FN;
 843                 input_dev->keycodesize = sizeof(hid->keycode[0]);
 844                 break;
 845
 846         case ADB_MOUSE:
 847                 sprintf(hid->name, "ADB mouse");
 848
 849                 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
 850                 input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
 851                         BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
 852                 input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
 853                 break;
 854
 855         case ADB_MISC:
 856                 switch (original_handler_id) {
 857                 case 0x02: /* Adjustable keyboard button device */
 858                         sprintf(hid->name, "ADB adjustable keyboard buttons");
 859                         input_dev->evbit[0] = BIT_MASK(EV_KEY) |
 860                                 BIT_MASK(EV_REP);
 861                         set_bit(KEY_SOUND, input_dev->keybit);
 862                         set_bit(KEY_MUTE, input_dev->keybit);
 863                         set_bit(KEY_VOLUMEUP, input_dev->keybit);
 864                         set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
 865                         break;
 866                 case 0x1f: /* Powerbook button device */
 867                         sprintf(hid->name, "ADB Powerbook buttons");
 868                         input_dev->evbit[0] = BIT_MASK(EV_KEY) |
 869                                 BIT_MASK(EV_REP);
 870                         set_bit(KEY_MUTE, input_dev->keybit);
 871                         set_bit(KEY_VOLUMEUP, input_dev->keybit);
 872                         set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
 873                         set_bit(KEY_BRIGHTNESSUP, input_dev->keybit);
 874                         set_bit(KEY_BRIGHTNESSDOWN, input_dev->keybit);
 875                         set_bit(KEY_EJECTCD, input_dev->keybit);
 876                         set_bit(KEY_SWITCHVIDEOMODE, input_dev->keybit);
 877                         set_bit(KEY_KBDILLUMTOGGLE, input_dev->keybit);
 878                         set_bit(KEY_KBDILLUMDOWN, input_dev->keybit);
 879                         set_bit(KEY_KBDILLUMUP, input_dev->keybit);
 880                         break;
 881                 }
 882                 if (hid->name[0])
 883                         break;
 884                 /* else fall through */
 885
 886         default:
 887                 printk(KERN_INFO "Trying to register unknown ADB device to input layer.\n");
 888                 err = -ENODEV;
 889                 goto fail;
 890         }
 891
 892         input_dev->keycode = hid->keycode;
 893
 894         err = input_register_device(input_dev);
 895         if (err)
 896                 goto fail;
 897
 898         if (default_id == ADB_KEYBOARD) {
 899                 /* HACK WARNING!! This should go away as soon there is an utility
 900                  * to control that for event devices.
 901                  */
 902                 input_dev->rep[REP_DELAY] = 500;   /* input layer default: 250 */
 903                 input_dev->rep[REP_PERIOD] = 66; /* input layer default: 33 */
 904         }
 905
 906         return 0;
 907
 908  fail:  input_free_device(input_dev);
 909         if (hid) {
 910                 kfree(hid->keycode);
 911                 kfree(hid);
 912         }
 913         adbhid[id] = NULL;
 914         return err;
 915 }
 916
 917 static void adbhid_input_unregister(int id)
 918 {
 919         input_unregister_device(adbhid[id]->input);
 920         kfree(adbhid[id]->keycode);
 921         kfree(adbhid[id]);
 922         adbhid[id] = NULL;
 923 }
 924
 925
 926 static u16
 927 adbhid_input_reregister(int id, int default_id, int org_handler_id,
 928                         int cur_handler_id, int mk)
 929 {
 930         if (adbhid[id]) {
 931                 if (adbhid[id]->input->id.product !=
 932                     ((id << 12)|(default_id << 8)|org_handler_id)) {
 933                         adbhid_input_unregister(id);
 934                         adbhid_input_register(id, default_id, org_handler_id,
 935                                               cur_handler_id, mk);
 936                 }
 937         } else
 938                 adbhid_input_register(id, default_id, org_handler_id,
 939                                       cur_handler_id, mk);
 940         return 1<<id;
 941 }
 942
 943 static void
 944 adbhid_input_devcleanup(u16 exist)
 945 {
 946         int i;
 947         for(i=1; i<16; i++)
 948                 if (adbhid[i] && !(exist&(1<<i)))
 949                         adbhid_input_unregister(i);
 950 }
 951
 952 static void
 953 adbhid_probe(void)
 954 {
 955         struct adb_request req;
 956         int i, default_id, org_handler_id, cur_handler_id;
 957         u16 reg = 0;
 958
 959         adb_register(ADB_MOUSE, 0, &mouse_ids, adbhid_mouse_input);
 960         adb_register(ADB_KEYBOARD, 0, &keyboard_ids, adbhid_keyboard_input);
 961         adb_register(ADB_MISC, 0, &buttons_ids, adbhid_buttons_input);
 962
 963         for (i = 0; i < keyboard_ids.nids; i++) {
 964                 int id = keyboard_ids.id[i];
 965
 966                 adb_get_infos(id, &default_id, &org_handler_id);
 967
 968                 /* turn off all leds */
 969                 adb_request(&req, NULL, ADBREQ_SYNC, 3,
 970                             ADB_WRITEREG(id, KEYB_LEDREG), 0xff, 0xff);
 971
 972                 /* Enable full feature set of the keyboard
 973                    ->get it to send separate codes for left and right shift,
 974                    control, option keys */
 975 #if 0           /* handler 5 doesn't send separate codes for R modifiers */
 976                 if (adb_try_handler_change(id, 5))
 977                         printk("ADB keyboard at %d, handler set to 5\n", id);
 978                 else
 979 #endif
 980                 if (adb_try_handler_change(id, 3))
 981                         printk("ADB keyboard at %d, handler set to 3\n", id);
 982                 else
 983                         printk("ADB keyboard at %d, handler 1\n", id);
 984
 985                 adb_get_infos(id, &default_id, &cur_handler_id);
 986                 reg |= adbhid_input_reregister(id, default_id, org_handler_id,
 987                                                cur_handler_id, 0);
 988         }
 989
 990         for (i = 0; i < buttons_ids.nids; i++) {
 991                 int id = buttons_ids.id[i];
 992
 993                 adb_get_infos(id, &default_id, &org_handler_id);
 994                 reg |= adbhid_input_reregister(id, default_id, org_handler_id,
 995                                                org_handler_id, 0);
 996         }
 997
 998         /* Try to switch all mice to handler 4, or 2 for three-button
 999            mode and full resolution. */
1000         for (i = 0; i < mouse_ids.nids; i++) {
1001                 int id = mouse_ids.id[i];
1002                 int mouse_kind;
1003
1004                 adb_get_infos(id, &default_id, &org_handler_id);
1005
1006                 if (adb_try_handler_change(id, 4)) {
1007                         printk("ADB mouse at %d, handler set to 4", id);
1008                         mouse_kind = ADBMOUSE_EXTENDED;
1009                 }
1010                 else if (adb_try_handler_change(id, 0x2F)) {
1011                         printk("ADB mouse at %d, handler set to 0x2F", id);
1012                         mouse_kind = ADBMOUSE_MICROSPEED;
1013                 }
1014                 else if (adb_try_handler_change(id, 0x42)) {
1015                         printk("ADB mouse at %d, handler set to 0x42", id);
1016                         mouse_kind = ADBMOUSE_TRACKBALLPRO;
1017                 }
1018                 else if (adb_try_handler_change(id, 0x66)) {
1019                         printk("ADB mouse at %d, handler set to 0x66", id);
1020                         mouse_kind = ADBMOUSE_MICROSPEED;
1021                 }
1022                 else if (adb_try_handler_change(id, 0x5F)) {
1023                         printk("ADB mouse at %d, handler set to 0x5F", id);
1024                         mouse_kind = ADBMOUSE_MICROSPEED;
1025                 }
1026                 else if (adb_try_handler_change(id, 3)) {
1027                         printk("ADB mouse at %d, handler set to 3", id);
1028                         mouse_kind = ADBMOUSE_MS_A3;
1029                 }
1030                 else if (adb_try_handler_change(id, 2)) {
1031                         printk("ADB mouse at %d, handler set to 2", id);
1032                         mouse_kind = ADBMOUSE_STANDARD_200;
1033                 }
1034                 else {
1035                         printk("ADB mouse at %d, handler 1", id);
1036                         mouse_kind = ADBMOUSE_STANDARD_100;
1037                 }
1038
1039                 if ((mouse_kind == ADBMOUSE_TRACKBALLPRO)
1040                     || (mouse_kind == ADBMOUSE_MICROSPEED)) {
1041                         init_microspeed(id);
1042                 } else if (mouse_kind == ADBMOUSE_MS_A3) {
1043                         init_ms_a3(id);
1044                 } else if (mouse_kind ==  ADBMOUSE_EXTENDED) {
1045                         /*
1046                          * Register 1 is usually used for device
1047                          * identification.  Here, we try to identify
1048                          * a known device and call the appropriate
1049                          * init function.
1050                          */
1051                         adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
1052                                     ADB_READREG(id, 1));
1053
1054                         if ((req.reply_len) &&
1055                             (req.reply[1] == 0x9a) && ((req.reply[2] == 0x21)
1056                                 || (req.reply[2] == 0x20))) {
1057                                 mouse_kind = ADBMOUSE_TRACKBALL;
1058                                 init_trackball(id);
1059                         }
1060                         else if ((req.reply_len >= 4) &&
1061                             (req.reply[1] == 0x74) && (req.reply[2] == 0x70) &&
1062                             (req.reply[3] == 0x61) && (req.reply[4] == 0x64)) {
1063                                 mouse_kind = ADBMOUSE_TRACKPAD;
1064                                 init_trackpad(id);
1065                         }
1066                         else if ((req.reply_len >= 4) &&
1067                             (req.reply[1] == 0x4b) && (req.reply[2] == 0x4d) &&
1068                             (req.reply[3] == 0x4c) && (req.reply[4] == 0x31)) {
1069                                 mouse_kind = ADBMOUSE_TURBOMOUSE5;
1070                                 init_turbomouse(id);
1071                         }
1072                         else if ((req.reply_len == 9) &&
1073                             (req.reply[1] == 0x4b) && (req.reply[2] == 0x4f) &&
1074                             (req.reply[3] == 0x49) && (req.reply[4] == 0x54)) {
1075                                 if (adb_try_handler_change(id, 0x42)) {
1076                                         printk("\nADB MacAlly 2-button mouse at %d, handler set to 0x42", id);
1077                                         mouse_kind = ADBMOUSE_MACALLY2;
1078                                 }
1079                         }
1080                 }
1081                 printk("\n");
1082
1083                 adb_get_infos(id, &default_id, &cur_handler_id);
1084                 reg |= adbhid_input_reregister(id, default_id, org_handler_id,
1085                                                cur_handler_id, mouse_kind);
1086         }
1087         adbhid_input_devcleanup(reg);
1088 }
1089
1090 static void
1091 init_trackpad(int id)
1092 {
1093         struct adb_request req;
1094         unsigned char r1_buffer[8];
1095
1096         printk(" (trackpad)");
1097
1098         adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
1099                     ADB_READREG(id,1));
1100         if (req.reply_len < 8)
1101             printk("bad length for reg. 1\n");
1102         else
1103         {
1104             memcpy(r1_buffer, &req.reply[1], 8);
1105
1106             adb_request(&req, NULL, ADBREQ_SYNC, 9,
1107                 ADB_WRITEREG(id,1),
1108                     r1_buffer[0],
1109                     r1_buffer[1],
1110                     r1_buffer[2],
1111                     r1_buffer[3],
1112                     r1_buffer[4],
1113                     r1_buffer[5],
1114                     0x0d,
1115                     r1_buffer[7]);
1116
1117             adb_request(&req, NULL, ADBREQ_SYNC, 9,
1118                 ADB_WRITEREG(id,2),
1119                     0x99,
1120                     0x94,
1121                     0x19,
1122                     0xff,
1123                     0xb2,
1124                     0x8a,
1125                     0x1b,
1126                     0x50);
1127
1128             adb_request(&req, NULL, ADBREQ_SYNC, 9,
1129                 ADB_WRITEREG(id,1),
1130                     r1_buffer[0],
1131                     r1_buffer[1],
1132                     r1_buffer[2],
1133                     r1_buffer[3],
1134                     r1_buffer[4],
1135                     r1_buffer[5],
1136                     0x03, /*r1_buffer[6],*/
1137                     r1_buffer[7]);
1138
1139             /* Without this flush, the trackpad may be locked up */
1140             adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1141         }
1142 }
1143
1144 static void
1145 init_trackball(int id)
1146 {
1147         struct adb_request req;
1148
1149         printk(" (trackman/mouseman)");
1150
1151         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1152         ADB_WRITEREG(id,1), 00,0x81);
1153
1154         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1155         ADB_WRITEREG(id,1), 01,0x81);
1156
1157         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1158         ADB_WRITEREG(id,1), 02,0x81);
1159
1160         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1161         ADB_WRITEREG(id,1), 03,0x38);
1162
1163         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1164         ADB_WRITEREG(id,1), 00,0x81);
1165
1166         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1167         ADB_WRITEREG(id,1), 01,0x81);
1168
1169         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1170         ADB_WRITEREG(id,1), 02,0x81);
1171
1172         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1173         ADB_WRITEREG(id,1), 03,0x38);
1174 }
1175
1176 static void
1177 init_turbomouse(int id)
1178 {
1179         struct adb_request req;
1180
1181         printk(" (TurboMouse 5)");
1182
1183         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1184
1185         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3));
1186
1187         adb_request(&req, NULL, ADBREQ_SYNC, 9,
1188         ADB_WRITEREG(3,2),
1189             0xe7,
1190             0x8c,
1191             0,
1192             0,
1193             0,
1194             0xff,
1195             0xff,
1196             0x94);
1197
1198         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3));
1199
1200         adb_request(&req, NULL, ADBREQ_SYNC, 9,
1201         ADB_WRITEREG(3,2),
1202             0xa5,
1203             0x14,
1204             0,
1205             0,
1206             0x69,
1207             0xff,
1208             0xff,
1209             0x27);
1210 }
1211
1212 static void
1213 init_microspeed(int id)
1214 {
1215         struct adb_request req;
1216
1217         printk(" (Microspeed/MacPoint or compatible)");
1218
1219         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1220
1221         /* This will initialize mice using the Microspeed, MacPoint and
1222            other compatible firmware. Bit 12 enables extended protocol.
1223
1224            Register 1 Listen (4 Bytes)
1225             0 -  3     Button is mouse (set also for double clicking!!!)
1226             4 -  7     Button is locking (affects change speed also)
1227             8 - 11     Button changes speed
1228            12          1 = Extended mouse mode, 0 = normal mouse mode
1229            13 - 15     unused 0
1230            16 - 23     normal speed
1231            24 - 31     changed speed
1232
1233        Register 1 talk holds version and product identification information.
1234        Register 1 Talk (4 Bytes):
1235             0 -  7     Product code
1236             8 - 23     undefined, reserved
1237            24 - 31     Version number
1238
1239        Speed 0 is max. 1 to 255 set speed in increments of 1/256 of max.
1240  */
1241         adb_request(&req, NULL, ADBREQ_SYNC, 5,
1242         ADB_WRITEREG(id,1),
1243             0x20,       /* alt speed = 0x20 (rather slow) */
1244             0x00,       /* norm speed = 0x00 (fastest) */
1245             0x10,       /* extended protocol, no speed change */
1246             0x07);      /* all buttons enabled as mouse buttons, no locking */
1247
1248
1249         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1250 }
1251
1252 static void
1253 init_ms_a3(int id)
1254 {
1255         struct adb_request req;
1256
1257         printk(" (Mouse Systems A3 Mouse, or compatible)");
1258         adb_request(&req, NULL, ADBREQ_SYNC, 3,
1259         ADB_WRITEREG(id, 0x2),
1260             0x00,
1261             0x07);
1262
1263         adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1264 }
1265
1266 static int __init adbhid_init(void)
1267 {
1268 #ifndef CONFIG_MAC
1269         if (!machine_is(chrp) && !machine_is(powermac))
1270                 return 0;
1271 #endif
1272
1273         led_request.complete = 1;
1274
1275         adbhid_probe();
1276
1277         blocking_notifier_chain_register(&adb_client_list,
1278                         &adbhid_adb_notifier);
1279
1280         return 0;
1281 }
1282
1283 static void __exit adbhid_exit(void)
1284 {
1285 }
1286
1287 module_init(adbhid_init);
1288 module_exit(adbhid_exit);