2 * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
4 * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de)
5 * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg
7 * This software may be used and distributed according to the terms
8 * of the GNU General Public License, incorporated herein by reference.
11 #undef ISDN_TTY_STAT_DEBUG
13 #include <linux/isdn.h>
14 #include <linux/serial.h> /* ASYNC_* flags */
15 #include <linux/slab.h>
16 #include <linux/delay.h>
17 #include <linux/mutex.h>
18 #include <linux/sched/signal.h>
19 #include "isdn_common.h"
21 #ifdef CONFIG_ISDN_AUDIO
22 #include "isdn_audio.h"
24 #define VBUFX (VBUF/16)
27 #define FIX_FILE_TRANSFER
28 #define DUMMY_HAYES_AT
32 static DEFINE_MUTEX(modem_info_mutex);
33 static int isdn_tty_edit_at(const char *, int, modem_info *);
34 static void isdn_tty_check_esc(const u_char *, u_char, int, int *, u_long *);
35 static void isdn_tty_modem_reset_regs(modem_info *, int);
36 static void isdn_tty_cmd_ATA(modem_info *);
37 static void isdn_tty_flush_buffer(struct tty_struct *);
38 static void isdn_tty_modem_result(int, modem_info *);
39 #ifdef CONFIG_ISDN_AUDIO
40 static int isdn_tty_countDLE(unsigned char *, int);
43 /* Leave this unchanged unless you know what you do! */
44 #define MODEM_PARANOIA_CHECK
45 #define MODEM_DO_RESTART
47 static int bit2si[8] =
48 {1, 5, 7, 7, 7, 7, 7, 7};
49 static int si2bit[8] =
50 {4, 1, 4, 4, 4, 4, 4, 4};
52 /* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
53 * to stuff incoming data directly into a tty's flip-buffer. This
54 * is done to speed up tty-receiving if the receive-queue is empty.
55 * This routine MUST be called with interrupts off.
58 * 0 = Failure, data has to be buffered and later processed by
59 * isdn_tty_readmodem().
62 isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
64 struct tty_port *port = &info->port;
72 if (!(info->mcr & UART_MCR_RTS))
76 #ifdef CONFIG_ISDN_AUDIO
77 + ISDN_AUDIO_SKB_DLECOUNT(skb)
81 c = tty_buffer_request_room(port, len);
85 #ifdef CONFIG_ISDN_AUDIO
86 if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
88 unsigned char *dp = skb->data;
91 tty_insert_flip_char(port, DLE, 0);
92 tty_insert_flip_char(port, *dp++, 0);
95 tty_insert_flip_char(port, DLE, 0);
100 tty_insert_flip_string(port, skb->data, len - 1);
101 last = skb->data[len - 1];
102 #ifdef CONFIG_ISDN_AUDIO
105 if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
106 tty_insert_flip_char(port, last, 0xFF);
108 tty_insert_flip_char(port, last, TTY_NORMAL);
109 tty_flip_buffer_push(port);
115 /* isdn_tty_readmodem() is called periodically from within timer-interrupt.
116 * It tries getting received data from the receive queue an stuff it into
117 * the tty's flip-buffer.
120 isdn_tty_readmodem(void)
128 for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
129 midx = dev->m_idx[i];
133 info = &dev->mdm.info[midx];
138 #ifdef CONFIG_ISDN_AUDIO
139 isdn_audio_eval_dtmf(info);
140 if ((info->vonline & 1) && (info->emu.vpar[1]))
141 isdn_audio_eval_silence(info);
143 if (info->mcr & UART_MCR_RTS) {
144 /* CISCO AsyncPPP Hack */
145 if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
146 r = isdn_readbchan_tty(info->isdn_driver,
150 r = isdn_readbchan_tty(info->isdn_driver,
154 tty_flip_buffer_push(&info->port);
165 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0);
169 isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb)
173 #ifdef CONFIG_ISDN_AUDIO
178 if ((midx = dev->m_idx[i]) < 0) {
179 /* if midx is invalid, packet is not for tty */
182 info = &dev->mdm.info[midx];
183 #ifdef CONFIG_ISDN_AUDIO
186 if ((info->vonline) && (!info->emu.vpar[4]))
187 isdn_audio_calc_dtmf(info, skb->data, skb->len, ifmt);
188 if ((info->vonline & 1) && (info->emu.vpar[1]))
189 isdn_audio_calc_silence(info, skb->data, skb->len, ifmt);
191 if ((info->online < 2)
192 #ifdef CONFIG_ISDN_AUDIO
193 && (!(info->vonline & 1))
196 /* If Modem not listening, drop data */
200 if (info->emu.mdmreg[REG_T70] & BIT_T70) {
201 if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) {
202 /* T.70 decoding: throw away the T.70 header (2 or 4 bytes) */
203 if (skb->data[0] == 3) /* pure data packet -> 4 byte headers */
206 if (skb->data[0] == 1) /* keepalive packet -> 2 byte hdr */
209 /* T.70 decoding: Simply throw away the T.70 header (4 bytes) */
210 if ((skb->data[0] == 1) && ((skb->data[1] == 0) || (skb->data[1] == 1)))
213 #ifdef CONFIG_ISDN_AUDIO
214 ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
215 ISDN_AUDIO_SKB_LOCK(skb) = 0;
216 if (info->vonline & 1) {
217 /* voice conversion/compression */
218 switch (info->emu.vpar[3]) {
223 * Since compressed data takes less
224 * space, we can overwrite the buffer.
226 skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr,
235 isdn_audio_ulaw2alaw(skb->data, skb->len);
240 isdn_audio_alaw2ulaw(skb->data, skb->len);
243 ISDN_AUDIO_SKB_DLECOUNT(skb) =
244 isdn_tty_countDLE(skb->data, skb->len);
246 #ifdef CONFIG_ISDN_TTY_FAX
248 if (info->faxonline & 2) {
249 isdn_tty_fax_bitorder(info, skb);
250 ISDN_AUDIO_SKB_DLECOUNT(skb) =
251 isdn_tty_countDLE(skb->data, skb->len);
256 /* Try to deliver directly via tty-buf if queue is empty */
257 spin_lock_irqsave(&info->readlock, flags);
258 if (skb_queue_empty(&dev->drv[di]->rpqueue[channel]))
259 if (isdn_tty_try_read(info, skb)) {
260 spin_unlock_irqrestore(&info->readlock, flags);
263 /* Direct deliver failed or queue wasn't empty.
264 * Queue up for later dequeueing via timer-irq.
266 __skb_queue_tail(&dev->drv[di]->rpqueue[channel], skb);
267 dev->drv[di]->rcvcount[channel] +=
269 #ifdef CONFIG_ISDN_AUDIO
270 + ISDN_AUDIO_SKB_DLECOUNT(skb)
273 spin_unlock_irqrestore(&info->readlock, flags);
274 /* Schedule dequeuing */
275 if ((dev->modempoll) && (info->rcvsched))
276 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
281 isdn_tty_cleanup_xmit(modem_info *info)
283 skb_queue_purge(&info->xmit_queue);
284 #ifdef CONFIG_ISDN_AUDIO
285 skb_queue_purge(&info->dtmf_queue);
290 isdn_tty_tint(modem_info *info)
292 struct sk_buff *skb = skb_dequeue(&info->xmit_queue);
298 if ((slen = isdn_writebuf_skb_stub(info->isdn_driver,
299 info->isdn_channel, 1, skb)) == len) {
300 struct tty_struct *tty = info->port.tty;
301 info->send_outstanding++;
302 info->msr &= ~UART_MSR_CTS;
303 info->lsr &= ~UART_LSR_TEMT;
308 /* Error: no channel, already shutdown, or wrong parameter */
312 skb_queue_head(&info->xmit_queue, skb);
315 #ifdef CONFIG_ISDN_AUDIO
317 isdn_tty_countDLE(unsigned char *buf, int len)
327 /* This routine is called from within isdn_tty_write() to perform
328 * DLE-decoding when sending audio-data.
331 isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len)
333 unsigned char *p = &info->port.xmit_buf[info->xmit_count];
343 memmove(p, p + 1, len - 1);
354 #ifdef ISDN_DEBUG_MODEM_VOICE
356 "DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n",
359 isdn_tty_at_cout("\020\003", info);
360 if (!info->vonline) {
361 #ifdef ISDN_DEBUG_MODEM_VOICE
363 "DLEdown: send VCON on ttyI%d\n",
366 isdn_tty_at_cout("\r\nVCON\r\n", info);
373 memmove(p, p + 1, len - 1);
387 printk(KERN_WARNING "isdn_tty: len<0 in DLEdown\n");
393 /* This routine is called from within isdn_tty_write() when receiving
394 * audio-data. It interrupts receiving, if an character other than
398 isdn_tty_end_vrx(const char *buf, int c)
404 if ((ch != 0x11) && (ch != 0x13))
411 static int voice_cf[7] =
412 {0, 0, 4, 3, 2, 0, 0};
414 #endif /* CONFIG_ISDN_AUDIO */
416 /* isdn_tty_senddown() is called either directly from within isdn_tty_write()
417 * or via timer-interrupt from within isdn_tty_modem_xmit(). It pulls
418 * outgoing data from the tty's xmit-buffer, handles voice-decompression or
419 * T.70 if necessary, and finally queues it up for sending via isdn_tty_tint.
422 isdn_tty_senddown(modem_info *info)
426 #ifdef CONFIG_ISDN_AUDIO
431 #ifdef CONFIG_ISDN_AUDIO
432 if (info->vonline & 4) {
434 if (!info->vonline) {
435 #ifdef ISDN_DEBUG_MODEM_VOICE
437 "senddown: send VCON on ttyI%d\n",
440 isdn_tty_at_cout("\r\nVCON\r\n", info);
444 if (!(buflen = info->xmit_count))
446 if ((info->emu.mdmreg[REG_CTS] & BIT_CTS) != 0)
447 info->msr &= ~UART_MSR_CTS;
448 info->lsr &= ~UART_LSR_TEMT;
449 /* info->xmit_count is modified here and in isdn_tty_write().
450 * So we return here if isdn_tty_write() is in the
453 atomic_inc(&info->xmit_lock);
454 if (!(atomic_dec_and_test(&info->xmit_lock)))
456 if (info->isdn_driver < 0) {
457 info->xmit_count = 0;
460 skb_res = dev->drv[info->isdn_driver]->interface->hl_hdrlen + 4;
461 #ifdef CONFIG_ISDN_AUDIO
462 if (info->vonline & 2)
463 audio_len = buflen * voice_cf[info->emu.vpar[3]];
466 skb = dev_alloc_skb(skb_res + buflen + audio_len);
468 skb = dev_alloc_skb(skb_res + buflen);
472 "isdn_tty: Out of memory in ttyI%d senddown\n",
476 skb_reserve(skb, skb_res);
477 skb_put_data(skb, info->port.xmit_buf, buflen);
478 info->xmit_count = 0;
479 #ifdef CONFIG_ISDN_AUDIO
480 if (info->vonline & 2) {
481 /* For now, ifmt is fixed to 1 (alaw), since this
482 * is used with ISDN everywhere in the world, except
483 * US, Canada and Japan.
484 * Later, when US-ISDN protocols are implemented,
485 * this setting will depend on the D-channel protocol.
489 /* voice conversion/decompression */
490 switch (info->emu.vpar[3]) {
494 /* adpcm, compatible to ZyXel 1496 modem
495 * with ROM revision 6.01
497 audio_len = isdn_audio_adpcm2xlaw(info->adpcms,
500 skb_put(skb, audio_len),
502 skb_pull(skb, buflen);
503 skb_trim(skb, audio_len);
508 isdn_audio_alaw2ulaw(skb->data,
514 isdn_audio_ulaw2alaw(skb->data,
519 #endif /* CONFIG_ISDN_AUDIO */
520 if (info->emu.mdmreg[REG_T70] & BIT_T70) {
521 /* Add T.70 simplified header */
522 if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT)
523 memcpy(skb_push(skb, 2), "\1\0", 2);
525 memcpy(skb_push(skb, 4), "\1\0\1\0", 4);
527 skb_queue_tail(&info->xmit_queue, skb);
530 /************************************************************
534 * mostly "stolen" from original Linux-serial.c and friends.
536 ************************************************************/
538 /* The next routine is called once from within timer-interrupt
539 * triggered within isdn_tty_modem_ncarrier(). It calls
540 * isdn_tty_modem_result() to stuff a "NO CARRIER" Message
541 * into the tty's buffer.
544 isdn_tty_modem_do_ncarrier(struct timer_list *t)
546 modem_info *info = from_timer(info, t, nc_timer);
547 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
550 /* Next routine is called, whenever the DTR-signal is raised.
551 * It checks the ncarrier-flag, and triggers the above routine
552 * when necessary. The ncarrier-flag is set, whenever DTR goes
556 isdn_tty_modem_ncarrier(modem_info *info)
558 if (info->ncarrier) {
559 info->nc_timer.expires = jiffies + HZ;
560 add_timer(&info->nc_timer);
565 * return the usage calculated by si and layer 2 protocol
568 isdn_calc_usage(int si, int l2)
570 int usg = ISDN_USAGE_MODEM;
572 #ifdef CONFIG_ISDN_AUDIO
575 case ISDN_PROTO_L2_MODEM:
576 usg = ISDN_USAGE_MODEM;
578 #ifdef CONFIG_ISDN_TTY_FAX
579 case ISDN_PROTO_L2_FAX:
580 usg = ISDN_USAGE_FAX;
583 case ISDN_PROTO_L2_TRANS:
585 usg = ISDN_USAGE_VOICE;
593 /* isdn_tty_dial() performs dialing of a tty an the necessary
594 * setup of the lower levels before that.
597 isdn_tty_dial(char *n, modem_info *info, atemu *m)
599 int usg = ISDN_USAGE_MODEM;
601 int l2 = m->mdmreg[REG_L2PROT];
607 for (j = 7; j >= 0; j--)
608 if (m->mdmreg[REG_SI1] & (1 << j)) {
612 usg = isdn_calc_usage(si, l2);
613 #ifdef CONFIG_ISDN_AUDIO
615 (l2 != ISDN_PROTO_L2_MODEM)
616 #ifdef CONFIG_ISDN_TTY_FAX
617 && (l2 != ISDN_PROTO_L2_FAX)
620 l2 = ISDN_PROTO_L2_TRANS;
621 usg = ISDN_USAGE_VOICE;
624 m->mdmreg[REG_SI1I] = si2bit[si];
625 spin_lock_irqsave(&dev->lock, flags);
626 i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
628 spin_unlock_irqrestore(&dev->lock, flags);
629 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
631 info->isdn_driver = dev->drvmap[i];
632 info->isdn_channel = dev->chanmap[i];
634 dev->m_idx[i] = info->line;
635 dev->usage[i] |= ISDN_USAGE_OUTGOING;
637 strcpy(info->last_num, n);
639 spin_unlock_irqrestore(&dev->lock, flags);
640 cmd.driver = info->isdn_driver;
641 cmd.arg = info->isdn_channel;
642 cmd.command = ISDN_CMD_CLREAZ;
644 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
645 cmd.driver = info->isdn_driver;
646 cmd.command = ISDN_CMD_SETEAZ;
648 cmd.driver = info->isdn_driver;
649 cmd.command = ISDN_CMD_SETL2;
651 cmd.arg = info->isdn_channel + (l2 << 8);
653 cmd.driver = info->isdn_driver;
654 cmd.command = ISDN_CMD_SETL3;
655 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
656 #ifdef CONFIG_ISDN_TTY_FAX
657 if (l2 == ISDN_PROTO_L2_FAX) {
658 cmd.parm.fax = info->fax;
659 info->fax->direction = ISDN_TTY_FAX_CONN_OUT;
663 cmd.driver = info->isdn_driver;
664 cmd.arg = info->isdn_channel;
665 sprintf(cmd.parm.setup.phone, "%s", n);
666 sprintf(cmd.parm.setup.eazmsn, "%s",
667 isdn_map_eaz2msn(m->msn, info->isdn_driver));
668 cmd.parm.setup.si1 = si;
669 cmd.parm.setup.si2 = m->mdmreg[REG_SI2];
670 cmd.command = ISDN_CMD_DIAL;
672 info->emu.carrierwait = 0;
673 strcpy(dev->num[i], n);
676 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
680 /* isdn_tty_hangup() disassociates a tty from the real
681 * ISDN-line (hangup). The usage-status is cleared
682 * and some cleanup is done also.
685 isdn_tty_modem_hup(modem_info *info, int local)
693 di = info->isdn_driver;
694 ch = info->isdn_channel;
695 if (di < 0 || ch < 0)
698 info->isdn_driver = -1;
699 info->isdn_channel = -1;
701 #ifdef ISDN_DEBUG_MODEM_HUP
702 printk(KERN_DEBUG "Mhup ttyI%d\n", info->line);
705 isdn_tty_flush_buffer(info->port.tty);
707 info->last_lhup = local;
709 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
711 #ifdef CONFIG_ISDN_AUDIO
713 #ifdef CONFIG_ISDN_TTY_FAX
715 info->fax->phase = ISDN_FAX_PHASE_IDLE;
717 info->emu.vpar[4] = 0;
718 info->emu.vpar[5] = 8;
719 kfree(info->dtmf_state);
720 info->dtmf_state = NULL;
721 kfree(info->silence_state);
722 info->silence_state = NULL;
728 if ((info->msr & UART_MSR_RI) &&
729 (info->emu.mdmreg[REG_RUNG] & BIT_RUNG))
730 isdn_tty_modem_result(RESULT_RUNG, info);
731 info->msr &= ~(UART_MSR_DCD | UART_MSR_RI);
732 info->lsr |= UART_LSR_TEMT;
736 cmd.command = ISDN_CMD_HANGUP;
741 isdn_all_eaz(di, ch);
742 info->emu.mdmreg[REG_RINGCNT] = 0;
743 isdn_free_channel(di, ch, 0);
745 if (info->drv_index >= 0) {
746 dev->m_idx[info->drv_index] = -1;
747 info->drv_index = -1;
752 * Begin of a CAPI like interface, currently used only for
753 * supplementary service (CAPI 2.0 part III)
755 #include <linux/isdn/capicmd.h>
756 #include <linux/module.h>
759 isdn_tty_capi_facility(capi_msg *cm) {
760 return (-1); /* dummy */
763 /* isdn_tty_suspend() tries to suspend the current tty connection
766 isdn_tty_suspend(char *id, modem_info *info, atemu *m)
775 #ifdef ISDN_DEBUG_MODEM_SERVICES
776 printk(KERN_DEBUG "Msusp ttyI%d\n", info->line);
779 if ((info->isdn_driver >= 0)) {
780 cmd.parm.cmsg.Length = l + 18;
781 cmd.parm.cmsg.Command = CAPI_FACILITY;
782 cmd.parm.cmsg.Subcommand = CAPI_REQ;
783 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
784 cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
785 cmd.parm.cmsg.para[1] = 0;
786 cmd.parm.cmsg.para[2] = l + 3;
787 cmd.parm.cmsg.para[3] = 4; /* 16 bit 0x0004 Suspend */
788 cmd.parm.cmsg.para[4] = 0;
789 cmd.parm.cmsg.para[5] = l;
790 memcpy(&cmd.parm.cmsg.para[6], id, l);
791 cmd.command = CAPI_PUT_MESSAGE;
792 cmd.driver = info->isdn_driver;
793 cmd.arg = info->isdn_channel;
798 /* isdn_tty_resume() tries to resume a suspended call
799 * setup of the lower levels before that. unfortunately here is no
800 * checking for compatibility of used protocols implemented by Q931
801 * It does the same things like isdn_tty_dial, the last command
802 * is different, may be we can merge it.
806 isdn_tty_resume(char *id, modem_info *info, atemu *m)
808 int usg = ISDN_USAGE_MODEM;
810 int l2 = m->mdmreg[REG_L2PROT];
818 for (j = 7; j >= 0; j--)
819 if (m->mdmreg[REG_SI1] & (1 << j)) {
823 usg = isdn_calc_usage(si, l2);
824 #ifdef CONFIG_ISDN_AUDIO
826 (l2 != ISDN_PROTO_L2_MODEM)
827 #ifdef CONFIG_ISDN_TTY_FAX
828 && (l2 != ISDN_PROTO_L2_FAX)
831 l2 = ISDN_PROTO_L2_TRANS;
832 usg = ISDN_USAGE_VOICE;
835 m->mdmreg[REG_SI1I] = si2bit[si];
836 spin_lock_irqsave(&dev->lock, flags);
837 i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
839 spin_unlock_irqrestore(&dev->lock, flags);
840 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
842 info->isdn_driver = dev->drvmap[i];
843 info->isdn_channel = dev->chanmap[i];
845 dev->m_idx[i] = info->line;
846 dev->usage[i] |= ISDN_USAGE_OUTGOING;
848 // strcpy(info->last_num, n);
850 spin_unlock_irqrestore(&dev->lock, flags);
851 cmd.driver = info->isdn_driver;
852 cmd.arg = info->isdn_channel;
853 cmd.command = ISDN_CMD_CLREAZ;
855 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
856 cmd.driver = info->isdn_driver;
857 cmd.command = ISDN_CMD_SETEAZ;
859 cmd.driver = info->isdn_driver;
860 cmd.command = ISDN_CMD_SETL2;
862 cmd.arg = info->isdn_channel + (l2 << 8);
864 cmd.driver = info->isdn_driver;
865 cmd.command = ISDN_CMD_SETL3;
866 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
868 cmd.driver = info->isdn_driver;
869 cmd.arg = info->isdn_channel;
870 cmd.parm.cmsg.Length = l + 18;
871 cmd.parm.cmsg.Command = CAPI_FACILITY;
872 cmd.parm.cmsg.Subcommand = CAPI_REQ;
873 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
874 cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */
875 cmd.parm.cmsg.para[1] = 0;
876 cmd.parm.cmsg.para[2] = l + 3;
877 cmd.parm.cmsg.para[3] = 5; /* 16 bit 0x0005 Resume */
878 cmd.parm.cmsg.para[4] = 0;
879 cmd.parm.cmsg.para[5] = l;
880 memcpy(&cmd.parm.cmsg.para[6], id, l);
881 cmd.command = CAPI_PUT_MESSAGE;
883 // strcpy(dev->num[i], n);
886 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
890 /* isdn_tty_send_msg() sends a message to a HL driver
891 * This is used for hybrid modem cards to send AT commands to it
895 isdn_tty_send_msg(modem_info *info, atemu *m, char *msg)
897 int usg = ISDN_USAGE_MODEM;
899 int l2 = m->mdmreg[REG_L2PROT];
906 l = min(strlen(msg), sizeof(cmd.parm) - sizeof(cmd.parm.cmsg)
907 + sizeof(cmd.parm.cmsg.para) - 2);
910 isdn_tty_modem_result(RESULT_ERROR, info);
913 for (j = 7; j >= 0; j--)
914 if (m->mdmreg[REG_SI1] & (1 << j)) {
918 usg = isdn_calc_usage(si, l2);
919 #ifdef CONFIG_ISDN_AUDIO
921 (l2 != ISDN_PROTO_L2_MODEM)
922 #ifdef CONFIG_ISDN_TTY_FAX
923 && (l2 != ISDN_PROTO_L2_FAX)
926 l2 = ISDN_PROTO_L2_TRANS;
927 usg = ISDN_USAGE_VOICE;
930 m->mdmreg[REG_SI1I] = si2bit[si];
931 spin_lock_irqsave(&dev->lock, flags);
932 i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn);
934 spin_unlock_irqrestore(&dev->lock, flags);
935 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
937 info->isdn_driver = dev->drvmap[i];
938 info->isdn_channel = dev->chanmap[i];
940 dev->m_idx[i] = info->line;
941 dev->usage[i] |= ISDN_USAGE_OUTGOING;
944 spin_unlock_irqrestore(&dev->lock, flags);
945 cmd.driver = info->isdn_driver;
946 cmd.arg = info->isdn_channel;
947 cmd.command = ISDN_CMD_CLREAZ;
949 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
950 cmd.driver = info->isdn_driver;
951 cmd.command = ISDN_CMD_SETEAZ;
953 cmd.driver = info->isdn_driver;
954 cmd.command = ISDN_CMD_SETL2;
956 cmd.arg = info->isdn_channel + (l2 << 8);
958 cmd.driver = info->isdn_driver;
959 cmd.command = ISDN_CMD_SETL3;
960 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
962 cmd.driver = info->isdn_driver;
963 cmd.arg = info->isdn_channel;
964 cmd.parm.cmsg.Length = l + 14;
965 cmd.parm.cmsg.Command = CAPI_MANUFACTURER;
966 cmd.parm.cmsg.Subcommand = CAPI_REQ;
967 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1;
968 cmd.parm.cmsg.para[0] = l + 1;
969 strncpy(&cmd.parm.cmsg.para[1], msg, l);
970 cmd.parm.cmsg.para[l + 1] = 0xd;
971 cmd.command = CAPI_PUT_MESSAGE;
972 /* info->dialing = 1;
973 strcpy(dev->num[i], n);
981 isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine)
983 #ifdef MODEM_PARANOIA_CHECK
985 printk(KERN_WARNING "isdn_tty: null info_struct for %s in %s\n",
989 if (info->magic != ISDN_ASYNC_MAGIC) {
990 printk(KERN_WARNING "isdn_tty: bad magic for modem struct %s in %s\n",
999 * This routine is called to set the UART divisor registers to match
1000 * the specified baud rate for a serial port.
1003 isdn_tty_change_speed(modem_info *info)
1005 struct tty_port *port = &info->port;
1013 cflag = port->tty->termios.c_cflag;
1015 quot = i = cflag & CBAUD;
1019 port->tty->termios.c_cflag &= ~CBAUDEX;
1024 info->mcr |= UART_MCR_DTR;
1025 isdn_tty_modem_ncarrier(info);
1027 info->mcr &= ~UART_MCR_DTR;
1028 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1029 #ifdef ISDN_DEBUG_MODEM_HUP
1030 printk(KERN_DEBUG "Mhup in changespeed\n");
1034 isdn_tty_modem_reset_regs(info, 0);
1035 isdn_tty_modem_hup(info, 1);
1039 /* byte size and parity */
1040 cval = cflag & (CSIZE | CSTOPB);
1043 cval |= UART_LCR_PARITY;
1044 if (!(cflag & PARODD))
1045 cval |= UART_LCR_EPAR;
1047 tty_port_set_check_carrier(port, ~cflag & CLOCAL);
1051 isdn_tty_startup(modem_info *info)
1053 if (tty_port_initialized(&info->port))
1055 isdn_lock_drivers();
1056 #ifdef ISDN_DEBUG_MODEM_OPEN
1057 printk(KERN_DEBUG "starting up ttyi%d ...\n", info->line);
1060 * Now, initialize the UART
1062 info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
1064 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
1066 * and set the speed of the serial port
1068 isdn_tty_change_speed(info);
1070 tty_port_set_initialized(&info->port, 1);
1071 info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
1072 info->send_outstanding = 0;
1077 * This routine will shutdown a serial port; interrupts are disabled, and
1078 * DTR is dropped if the hangup on close termio flag is on.
1081 isdn_tty_shutdown(modem_info *info)
1083 if (!tty_port_initialized(&info->port))
1085 #ifdef ISDN_DEBUG_MODEM_OPEN
1086 printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
1088 isdn_unlock_drivers();
1089 info->msr &= ~UART_MSR_RI;
1090 if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) {
1091 info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
1092 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1093 isdn_tty_modem_reset_regs(info, 0);
1094 #ifdef ISDN_DEBUG_MODEM_HUP
1095 printk(KERN_DEBUG "Mhup in isdn_tty_shutdown\n");
1097 isdn_tty_modem_hup(info, 1);
1101 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
1103 tty_port_set_initialized(&info->port, 0);
1106 /* isdn_tty_write() is the main send-routine. It is called from the upper
1107 * levels within the kernel to perform sending data. Depending on the
1108 * online-flag it either directs output to the at-command-interpreter or
1109 * to the lower level. Additional tasks done here:
1110 * - If online, check for escape-sequence (+++)
1111 * - If sending audio-data, call isdn_tty_DLEdown() to parse DLE-codes.
1112 * - If receiving audio-data, call isdn_tty_end_vrx() to abort if needed.
1113 * - If dialing, abort dial.
1116 isdn_tty_write(struct tty_struct *tty, const u_char *buf, int count)
1120 modem_info *info = (modem_info *) tty->driver_data;
1121 atemu *m = &info->emu;
1123 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write"))
1125 /* See isdn_tty_senddown() */
1126 atomic_inc(&info->xmit_lock);
1129 if (c > info->xmit_size - info->xmit_count)
1130 c = info->xmit_size - info->xmit_count;
1131 if (info->isdn_driver >= 0 && c > dev->drv[info->isdn_driver]->maxbufsize)
1132 c = dev->drv[info->isdn_driver]->maxbufsize;
1135 if ((info->online > 1)
1136 #ifdef CONFIG_ISDN_AUDIO
1137 || (info->vonline & 3)
1140 #ifdef CONFIG_ISDN_AUDIO
1143 isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c,
1146 memcpy(&info->port.xmit_buf[info->xmit_count], buf, c);
1147 #ifdef CONFIG_ISDN_AUDIO
1148 if (info->vonline) {
1149 int cc = isdn_tty_handleDLEdown(info, m, c);
1150 if (info->vonline & 2) {
1152 /* If DLE decoding results in zero-transmit, but
1153 * c originally was non-zero, do a wakeup.
1156 info->msr |= UART_MSR_CTS;
1157 info->lsr |= UART_LSR_TEMT;
1159 info->xmit_count += cc;
1161 if ((info->vonline & 3) == 1) {
1162 /* Do NOT handle Ctrl-Q or Ctrl-S
1163 * when in full-duplex audio mode.
1165 if (isdn_tty_end_vrx(buf, c)) {
1166 info->vonline &= ~1;
1167 #ifdef ISDN_DEBUG_MODEM_VOICE
1169 "got !^Q/^S, send DLE-ETX,VCON on ttyI%d\n",
1172 isdn_tty_at_cout("\020\003\r\nVCON\r\n", info);
1176 if (TTY_IS_FCLASS1(info)) {
1177 int cc = isdn_tty_handleDLEdown(info, m, c);
1179 if (info->vonline & 4) { /* ETX seen */
1182 c.command = ISDN_CMD_FAXCMD;
1183 c.driver = info->isdn_driver;
1184 c.arg = info->isdn_channel;
1185 c.parm.aux.cmd = ISDN_FAX_CLASS1_CTRL;
1186 c.parm.aux.subcmd = ETX;
1190 #ifdef ISDN_DEBUG_MODEM_VOICE
1191 printk(KERN_DEBUG "fax dle cc/c %d/%d\n", cc, c);
1193 info->xmit_count += cc;
1196 info->xmit_count += c;
1198 info->msr |= UART_MSR_CTS;
1199 info->lsr |= UART_LSR_TEMT;
1200 if (info->dialing) {
1202 #ifdef ISDN_DEBUG_MODEM_HUP
1203 printk(KERN_DEBUG "Mhup in isdn_tty_write\n");
1205 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
1206 isdn_tty_modem_hup(info, 1);
1208 c = isdn_tty_edit_at(buf, c, info);
1214 atomic_dec(&info->xmit_lock);
1215 if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) {
1216 if (m->mdmreg[REG_DXMT] & BIT_DXMT) {
1217 isdn_tty_senddown(info);
1218 isdn_tty_tint(info);
1220 isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
1226 isdn_tty_write_room(struct tty_struct *tty)
1228 modem_info *info = (modem_info *) tty->driver_data;
1231 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write_room"))
1234 return info->xmit_size;
1235 ret = info->xmit_size - info->xmit_count;
1236 return (ret < 0) ? 0 : ret;
1240 isdn_tty_chars_in_buffer(struct tty_struct *tty)
1242 modem_info *info = (modem_info *) tty->driver_data;
1244 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_chars_in_buffer"))
1248 return (info->xmit_count);
1252 isdn_tty_flush_buffer(struct tty_struct *tty)
1259 info = (modem_info *) tty->driver_data;
1260 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_buffer")) {
1263 isdn_tty_cleanup_xmit(info);
1264 info->xmit_count = 0;
1269 isdn_tty_flush_chars(struct tty_struct *tty)
1271 modem_info *info = (modem_info *) tty->driver_data;
1273 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_chars"))
1275 if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue))
1276 isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
1280 * ------------------------------------------------------------
1281 * isdn_tty_throttle()
1283 * This routine is called by the upper-layer tty layer to signal that
1284 * incoming characters should be throttled.
1285 * ------------------------------------------------------------
1288 isdn_tty_throttle(struct tty_struct *tty)
1290 modem_info *info = (modem_info *) tty->driver_data;
1292 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_throttle"))
1295 info->x_char = STOP_CHAR(tty);
1296 info->mcr &= ~UART_MCR_RTS;
1300 isdn_tty_unthrottle(struct tty_struct *tty)
1302 modem_info *info = (modem_info *) tty->driver_data;
1304 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_unthrottle"))
1310 info->x_char = START_CHAR(tty);
1312 info->mcr |= UART_MCR_RTS;
1316 * ------------------------------------------------------------
1317 * isdn_tty_ioctl() and friends
1318 * ------------------------------------------------------------
1322 * isdn_tty_get_lsr_info - get line status register info
1324 * Purpose: Let user call ioctl() to get info when the UART physically
1325 * is emptied. On bus types like RS485, the transmitter must
1326 * release the bus after transmitting. This must be done when
1327 * the transmit shift register is empty, not be done when the
1328 * transmit holding register is empty. This functionality
1329 * allows RS485 driver to be written in user space.
1332 isdn_tty_get_lsr_info(modem_info *info, uint __user *value)
1338 result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
1339 return put_user(result, value);
1344 isdn_tty_tiocmget(struct tty_struct *tty)
1346 modem_info *info = (modem_info *) tty->driver_data;
1347 u_char control, status;
1349 if (isdn_tty_paranoia_check(info, tty->name, __func__))
1351 if (tty_io_error(tty))
1354 mutex_lock(&modem_info_mutex);
1355 #ifdef ISDN_DEBUG_MODEM_IOCTL
1356 printk(KERN_DEBUG "ttyI%d ioctl TIOCMGET\n", info->line);
1359 control = info->mcr;
1361 mutex_unlock(&modem_info_mutex);
1362 return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
1363 | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
1364 | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
1365 | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
1366 | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
1367 | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
1371 isdn_tty_tiocmset(struct tty_struct *tty,
1372 unsigned int set, unsigned int clear)
1374 modem_info *info = (modem_info *) tty->driver_data;
1376 if (isdn_tty_paranoia_check(info, tty->name, __func__))
1378 if (tty_io_error(tty))
1381 #ifdef ISDN_DEBUG_MODEM_IOCTL
1382 printk(KERN_DEBUG "ttyI%d ioctl TIOCMxxx: %x %x\n", info->line, set, clear);
1385 mutex_lock(&modem_info_mutex);
1386 if (set & TIOCM_RTS)
1387 info->mcr |= UART_MCR_RTS;
1388 if (set & TIOCM_DTR) {
1389 info->mcr |= UART_MCR_DTR;
1390 isdn_tty_modem_ncarrier(info);
1393 if (clear & TIOCM_RTS)
1394 info->mcr &= ~UART_MCR_RTS;
1395 if (clear & TIOCM_DTR) {
1396 info->mcr &= ~UART_MCR_DTR;
1397 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
1398 isdn_tty_modem_reset_regs(info, 0);
1399 #ifdef ISDN_DEBUG_MODEM_HUP
1400 printk(KERN_DEBUG "Mhup in TIOCMSET\n");
1404 isdn_tty_modem_hup(info, 1);
1407 mutex_unlock(&modem_info_mutex);
1412 isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg)
1414 modem_info *info = (modem_info *) tty->driver_data;
1417 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_ioctl"))
1419 if (tty_io_error(tty))
1422 case TCSBRK: /* SVID version: non-zero arg --> no break */
1423 #ifdef ISDN_DEBUG_MODEM_IOCTL
1424 printk(KERN_DEBUG "ttyI%d ioctl TCSBRK\n", info->line);
1426 retval = tty_check_change(tty);
1429 tty_wait_until_sent(tty, 0);
1431 case TCSBRKP: /* support for POSIX tcsendbreak() */
1432 #ifdef ISDN_DEBUG_MODEM_IOCTL
1433 printk(KERN_DEBUG "ttyI%d ioctl TCSBRKP\n", info->line);
1435 retval = tty_check_change(tty);
1438 tty_wait_until_sent(tty, 0);
1440 case TIOCSERGETLSR: /* Get line status register */
1441 #ifdef ISDN_DEBUG_MODEM_IOCTL
1442 printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line);
1444 return isdn_tty_get_lsr_info(info, (uint __user *) arg);
1446 #ifdef ISDN_DEBUG_MODEM_IOCTL
1447 printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line);
1449 return -ENOIOCTLCMD;
1455 isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
1457 modem_info *info = (modem_info *) tty->driver_data;
1459 mutex_lock(&modem_info_mutex);
1461 isdn_tty_change_speed(info);
1463 if (tty->termios.c_cflag == old_termios->c_cflag &&
1464 tty->termios.c_ispeed == old_termios->c_ispeed &&
1465 tty->termios.c_ospeed == old_termios->c_ospeed) {
1466 mutex_unlock(&modem_info_mutex);
1469 isdn_tty_change_speed(info);
1471 mutex_unlock(&modem_info_mutex);
1475 * ------------------------------------------------------------
1476 * isdn_tty_open() and friends
1477 * ------------------------------------------------------------
1480 static int isdn_tty_install(struct tty_driver *driver, struct tty_struct *tty)
1482 modem_info *info = &dev->mdm.info[tty->index];
1484 if (isdn_tty_paranoia_check(info, tty->name, __func__))
1487 tty->driver_data = info;
1489 return tty_port_install(&info->port, driver, tty);
1493 * This routine is called whenever a serial port is opened. It
1494 * enables interrupts for a serial port, linking in its async structure into
1495 * the IRQ chain. It also performs the serial-specific
1496 * initialization for the tty structure.
1499 isdn_tty_open(struct tty_struct *tty, struct file *filp)
1501 modem_info *info = tty->driver_data;
1502 struct tty_port *port = &info->port;
1505 #ifdef ISDN_DEBUG_MODEM_OPEN
1506 printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
1512 * Start up serial port
1514 retval = isdn_tty_startup(info);
1516 #ifdef ISDN_DEBUG_MODEM_OPEN
1517 printk(KERN_DEBUG "isdn_tty_open return after startup\n");
1521 retval = tty_port_block_til_ready(port, tty, filp);
1523 #ifdef ISDN_DEBUG_MODEM_OPEN
1524 printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n");
1528 #ifdef ISDN_DEBUG_MODEM_OPEN
1529 printk(KERN_DEBUG "isdn_tty_open ttyi%d successful...\n", info->line);
1532 #ifdef ISDN_DEBUG_MODEM_OPEN
1533 printk(KERN_DEBUG "isdn_tty_open normal exit\n");
1539 isdn_tty_close(struct tty_struct *tty, struct file *filp)
1541 modem_info *info = (modem_info *) tty->driver_data;
1542 struct tty_port *port = &info->port;
1545 if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close"))
1547 if (tty_hung_up_p(filp)) {
1548 #ifdef ISDN_DEBUG_MODEM_OPEN
1549 printk(KERN_DEBUG "isdn_tty_close return after tty_hung_up_p\n");
1553 if ((tty->count == 1) && (port->count != 1)) {
1555 * Uh, oh. tty->count is 1, which means that the tty
1556 * structure will be freed. Info->count should always
1557 * be one in these conditions. If it's greater than
1558 * one, we've got real problems, since it means the
1559 * serial port won't be shutdown.
1561 printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, "
1562 "info->count is %d\n", port->count);
1565 if (--port->count < 0) {
1566 printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n",
1567 info->line, port->count);
1571 #ifdef ISDN_DEBUG_MODEM_OPEN
1572 printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
1580 * At this point we stop accepting input. To do this, we
1581 * disable the receive line status interrupts, and tell the
1582 * interrupt driver to stop checking the data ready bit in the
1583 * line status register.
1585 if (tty_port_initialized(port)) {
1586 tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
1588 * Before we drop DTR, make sure the UART transmitter
1589 * has completely drained; this is especially
1590 * important if there is a transmit FIFO!
1592 timeout = jiffies + HZ;
1593 while (!(info->lsr & UART_LSR_TEMT)) {
1594 schedule_timeout_interruptible(20);
1595 if (time_after(jiffies, timeout))
1600 isdn_tty_shutdown(info);
1601 isdn_tty_flush_buffer(tty);
1602 tty_ldisc_flush(tty);
1606 tty_port_close_end(port, tty);
1608 #ifdef ISDN_DEBUG_MODEM_OPEN
1609 printk(KERN_DEBUG "isdn_tty_close normal exit\n");
1614 * isdn_tty_hangup() --- called by tty_hangup() when a hangup is signaled.
1617 isdn_tty_hangup(struct tty_struct *tty)
1619 modem_info *info = (modem_info *) tty->driver_data;
1620 struct tty_port *port = &info->port;
1622 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup"))
1624 isdn_tty_shutdown(info);
1626 tty_port_set_active(port, 0);
1628 wake_up_interruptible(&port->open_wait);
1631 /* This routine initializes all emulator-data.
1634 isdn_tty_reset_profile(atemu *m)
1647 m->profile[11] = 70;
1648 m->profile[12] = 0x45;
1650 m->profile[14] = ISDN_PROTO_L2_X75I;
1651 m->profile[15] = ISDN_PROTO_L3_TRANS;
1652 m->profile[16] = ISDN_SERIAL_XMIT_SIZE / 16;
1653 m->profile[17] = ISDN_MODEM_WINSIZE;
1662 #ifdef CONFIG_ISDN_AUDIO
1664 isdn_tty_modem_reset_vpar(atemu *m)
1666 m->vpar[0] = 2; /* Voice-device (2 = phone line) */
1667 m->vpar[1] = 0; /* Silence detection level (0 = none ) */
1668 m->vpar[2] = 70; /* Silence interval (7 sec. ) */
1669 m->vpar[3] = 2; /* Compression type (1 = ADPCM-2 ) */
1670 m->vpar[4] = 0; /* DTMF detection level (0 = softcode ) */
1671 m->vpar[5] = 8; /* DTMF interval (8 * 5 ms. ) */
1675 #ifdef CONFIG_ISDN_TTY_FAX
1677 isdn_tty_modem_reset_faxpar(modem_info *info)
1679 T30_s *f = info->fax;
1682 f->phase = ISDN_FAX_PHASE_IDLE;
1684 f->resolution = 1; /* fine */
1685 f->rate = 5; /* 14400 bit/s */
1692 memset(&f->id[0], 32, FAXIDLEN - 1);
1693 f->id[FAXIDLEN - 1] = 0;
1704 memset(&f->pollid[0], 32, FAXIDLEN - 1);
1705 f->pollid[FAXIDLEN - 1] = 0;
1710 isdn_tty_modem_reset_regs(modem_info *info, int force)
1712 atemu *m = &info->emu;
1713 if ((m->mdmreg[REG_DTRR] & BIT_DTRR) || force) {
1714 memcpy(m->mdmreg, m->profile, ISDN_MODEM_NUMREG);
1715 memcpy(m->msn, m->pmsn, ISDN_MSNLEN);
1716 memcpy(m->lmsn, m->plmsn, ISDN_LMSNLEN);
1717 info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
1719 #ifdef CONFIG_ISDN_AUDIO
1720 isdn_tty_modem_reset_vpar(m);
1722 #ifdef CONFIG_ISDN_TTY_FAX
1723 isdn_tty_modem_reset_faxpar(info);
1729 modem_write_profile(atemu *m)
1731 memcpy(m->profile, m->mdmreg, ISDN_MODEM_NUMREG);
1732 memcpy(m->pmsn, m->msn, ISDN_MSNLEN);
1733 memcpy(m->plmsn, m->lmsn, ISDN_LMSNLEN);
1735 send_sig(SIGIO, dev->profd, 1);
1738 static const struct tty_operations modem_ops = {
1739 .install = isdn_tty_install,
1740 .open = isdn_tty_open,
1741 .close = isdn_tty_close,
1742 .write = isdn_tty_write,
1743 .flush_chars = isdn_tty_flush_chars,
1744 .write_room = isdn_tty_write_room,
1745 .chars_in_buffer = isdn_tty_chars_in_buffer,
1746 .flush_buffer = isdn_tty_flush_buffer,
1747 .ioctl = isdn_tty_ioctl,
1748 .throttle = isdn_tty_throttle,
1749 .unthrottle = isdn_tty_unthrottle,
1750 .set_termios = isdn_tty_set_termios,
1751 .hangup = isdn_tty_hangup,
1752 .tiocmget = isdn_tty_tiocmget,
1753 .tiocmset = isdn_tty_tiocmset,
1756 static int isdn_tty_carrier_raised(struct tty_port *port)
1758 modem_info *info = container_of(port, modem_info, port);
1759 return info->msr & UART_MSR_DCD;
1762 static const struct tty_port_operations isdn_tty_port_ops = {
1763 .carrier_raised = isdn_tty_carrier_raised,
1767 isdn_tty_modem_init(void)
1774 m->tty_modem = alloc_tty_driver(ISDN_MAX_CHANNELS);
1777 m->tty_modem->name = "ttyI";
1778 m->tty_modem->major = ISDN_TTY_MAJOR;
1779 m->tty_modem->minor_start = 0;
1780 m->tty_modem->type = TTY_DRIVER_TYPE_SERIAL;
1781 m->tty_modem->subtype = SERIAL_TYPE_NORMAL;
1782 m->tty_modem->init_termios = tty_std_termios;
1783 m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1784 m->tty_modem->flags = TTY_DRIVER_REAL_RAW;
1785 m->tty_modem->driver_name = "isdn_tty";
1786 tty_set_operations(m->tty_modem, &modem_ops);
1787 retval = tty_register_driver(m->tty_modem);
1789 printk(KERN_WARNING "isdn_tty: Couldn't register modem-device\n");
1792 for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
1794 #ifdef CONFIG_ISDN_TTY_FAX
1795 if (!(info->fax = kmalloc(sizeof(T30_s), GFP_KERNEL))) {
1796 printk(KERN_ERR "Could not allocate fax t30-buffer\n");
1798 goto err_unregister;
1801 tty_port_init(&info->port);
1802 info->port.ops = &isdn_tty_port_ops;
1803 spin_lock_init(&info->readlock);
1804 sprintf(info->last_cause, "0000");
1805 sprintf(info->last_num, "none");
1807 info->last_lhup = 1;
1810 isdn_tty_reset_profile(&info->emu);
1811 isdn_tty_modem_reset_regs(info, 1);
1812 info->magic = ISDN_ASYNC_MAGIC;
1815 info->isdn_driver = -1;
1816 info->isdn_channel = -1;
1817 info->drv_index = -1;
1818 info->xmit_size = ISDN_SERIAL_XMIT_SIZE;
1819 timer_setup(&info->nc_timer, isdn_tty_modem_do_ncarrier, 0);
1820 skb_queue_head_init(&info->xmit_queue);
1821 #ifdef CONFIG_ISDN_AUDIO
1822 skb_queue_head_init(&info->dtmf_queue);
1824 info->port.xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5,
1826 if (!info->port.xmit_buf) {
1827 printk(KERN_ERR "Could not allocate modem xmit-buffer\n");
1829 goto err_unregister;
1831 /* Make room for T.70 header */
1832 info->port.xmit_buf += 4;
1836 for (i--; i >= 0; i--) {
1838 #ifdef CONFIG_ISDN_TTY_FAX
1841 kfree(info->port.xmit_buf - 4);
1842 info->port.xmit_buf = NULL;
1843 tty_port_destroy(&info->port);
1845 tty_unregister_driver(m->tty_modem);
1847 put_tty_driver(m->tty_modem);
1848 m->tty_modem = NULL;
1858 for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
1859 info = &dev->mdm.info[i];
1860 isdn_tty_cleanup_xmit(info);
1861 #ifdef CONFIG_ISDN_TTY_FAX
1864 kfree(info->port.xmit_buf - 4);
1865 info->port.xmit_buf = NULL;
1866 tty_port_destroy(&info->port);
1868 tty_unregister_driver(dev->mdm.tty_modem);
1869 put_tty_driver(dev->mdm.tty_modem);
1870 dev->mdm.tty_modem = NULL;
1875 * isdn_tty_match_icall(char *MSN, atemu *tty_emulator, int dev_idx)
1876 * match the MSN against the MSNs (glob patterns) defined for tty_emulator,
1877 * and return 0 for match, 1 for no match, 2 if MSN could match if longer.
1881 isdn_tty_match_icall(char *cid, atemu *emu, int di)
1883 #ifdef ISDN_DEBUG_MODEM_ICALL
1884 printk(KERN_DEBUG "m_fi: msn=%s lmsn=%s mmsn=%s mreg[SI1]=%d mreg[SI2]=%d\n",
1885 emu->msn, emu->lmsn, isdn_map_eaz2msn(emu->msn, di),
1886 emu->mdmreg[REG_SI1], emu->mdmreg[REG_SI2]);
1888 if (strlen(emu->lmsn)) {
1889 char *p = emu->lmsn;
1895 if ((q = strchr(p, ';')))
1897 if ((tmp = isdn_msncmp(cid, isdn_map_eaz2msn(p, di))) > ret)
1899 #ifdef ISDN_DEBUG_MODEM_ICALL
1900 printk(KERN_DEBUG "m_fi: lmsnX=%s mmsn=%s -> tmp=%d\n",
1901 p, isdn_map_eaz2msn(emu->msn, di), tmp);
1916 tmp = isdn_msncmp(cid, isdn_map_eaz2msn(emu->msn, di));
1917 #ifdef ISDN_DEBUG_MODEM_ICALL
1918 printk(KERN_DEBUG "m_fi: mmsn=%s -> tmp=%d\n",
1919 isdn_map_eaz2msn(emu->msn, di), tmp);
1926 * An incoming call-request has arrived.
1927 * Search the tty-devices for an appropriate device and bind
1928 * it to the ISDN-Channel.
1931 * 0 = No matching device found.
1932 * 1 = A matching device found.
1933 * 3 = No match found, but eventually would match, if
1937 isdn_tty_find_icall(int di, int ch, setup_parm *setup)
1948 if (!setup->phone[0]) {
1950 printk(KERN_INFO "isdn_tty: Incoming call without OAD, assuming '0'\n");
1953 si1 = (int) setup->si1;
1954 si2 = (int) setup->si2;
1955 if (!setup->eazmsn[0]) {
1956 printk(KERN_WARNING "isdn_tty: Incoming call without CPN, assuming '0'\n");
1959 eaz = setup->eazmsn;
1960 #ifdef ISDN_DEBUG_MODEM_ICALL
1961 printk(KERN_DEBUG "m_fi: eaz=%s si1=%d si2=%d\n", eaz, si1, si2);
1964 spin_lock_irqsave(&dev->lock, flags);
1965 for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
1966 modem_info *info = &dev->mdm.info[i];
1968 if (info->port.count == 0)
1970 if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) && /* SI1 is matching */
1971 (info->emu.mdmreg[REG_SI2] == si2)) { /* SI2 is matching */
1972 idx = isdn_dc2minor(di, ch);
1973 #ifdef ISDN_DEBUG_MODEM_ICALL
1974 printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret);
1975 printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx,
1976 info->port.flags, info->isdn_driver,
1977 info->isdn_channel, dev->usage[idx]);
1980 #ifndef FIX_FILE_TRANSFER
1981 tty_port_active(&info->port) &&
1983 (info->isdn_driver == -1) &&
1984 (info->isdn_channel == -1) &&
1985 (USG_NONE(dev->usage[idx]))) {
1988 if ((matchret = isdn_tty_match_icall(eaz, &info->emu, di)) > wret)
1990 if (!matchret) { /* EAZ is matching */
1991 info->isdn_driver = di;
1992 info->isdn_channel = ch;
1993 info->drv_index = idx;
1994 dev->m_idx[idx] = info->line;
1995 dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE;
1996 dev->usage[idx] |= isdn_calc_usage(si1, info->emu.mdmreg[REG_L2PROT]);
1997 strcpy(dev->num[idx], nr);
1998 strcpy(info->emu.cpn, eaz);
1999 info->emu.mdmreg[REG_SI1I] = si2bit[si1];
2000 info->emu.mdmreg[REG_PLAN] = setup->plan;
2001 info->emu.mdmreg[REG_SCREEN] = setup->screen;
2003 spin_unlock_irqrestore(&dev->lock, flags);
2004 printk(KERN_INFO "isdn_tty: call from %s, -> RING on ttyI%d\n", nr,
2006 info->msr |= UART_MSR_RI;
2007 isdn_tty_modem_result(RESULT_RING, info);
2008 isdn_timer_ctrl(ISDN_TIMER_MODEMRING, 1);
2014 spin_unlock_irqrestore(&dev->lock, flags);
2015 printk(KERN_INFO "isdn_tty: call from %s -> %s %s\n", nr, eaz,
2016 ((dev->drv[di]->flags & DRV_FLAG_REJBUS) && (wret != 2)) ? "rejected" : "ignored");
2017 return (wret == 2) ? 3 : 0;
2021 isdn_tty_stat_callback(int i, isdn_ctrl *c)
2029 if ((mi = dev->m_idx[i]) >= 0) {
2030 info = &dev->mdm.info[mi];
2031 switch (c->command) {
2032 case ISDN_STAT_CINF:
2033 printk(KERN_DEBUG "CHARGEINFO on ttyI%d: %ld %s\n", info->line, c->arg, c->parm.num);
2034 info->emu.charge = (unsigned) simple_strtoul(c->parm.num, &e, 10);
2035 if (e == (char *)c->parm.num)
2036 info->emu.charge = 0;
2039 case ISDN_STAT_BSENT:
2040 #ifdef ISDN_TTY_STAT_DEBUG
2041 printk(KERN_DEBUG "tty_STAT_BSENT ttyI%d\n", info->line);
2043 if ((info->isdn_driver == c->driver) &&
2044 (info->isdn_channel == c->arg)) {
2045 info->msr |= UART_MSR_CTS;
2046 if (info->send_outstanding)
2047 if (!(--info->send_outstanding))
2048 info->lsr |= UART_LSR_TEMT;
2049 isdn_tty_tint(info);
2053 case ISDN_STAT_CAUSE:
2054 #ifdef ISDN_TTY_STAT_DEBUG
2055 printk(KERN_DEBUG "tty_STAT_CAUSE ttyI%d\n", info->line);
2057 /* Signal cause to tty-device */
2058 strncpy(info->last_cause, c->parm.num, 5);
2060 case ISDN_STAT_DISPLAY:
2061 #ifdef ISDN_TTY_STAT_DEBUG
2062 printk(KERN_DEBUG "tty_STAT_DISPLAY ttyI%d\n", info->line);
2064 /* Signal display to tty-device */
2065 if ((info->emu.mdmreg[REG_DISPLAY] & BIT_DISPLAY) &&
2066 !(info->emu.mdmreg[REG_RESPNUM] & BIT_RESPNUM)) {
2067 isdn_tty_at_cout("\r\n", info);
2068 isdn_tty_at_cout("DISPLAY: ", info);
2069 isdn_tty_at_cout(c->parm.display, info);
2070 isdn_tty_at_cout("\r\n", info);
2073 case ISDN_STAT_DCONN:
2074 #ifdef ISDN_TTY_STAT_DEBUG
2075 printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line);
2077 if (tty_port_active(&info->port)) {
2078 if (info->dialing == 1) {
2084 case ISDN_STAT_DHUP:
2085 #ifdef ISDN_TTY_STAT_DEBUG
2086 printk(KERN_DEBUG "tty_STAT_DHUP ttyI%d\n", info->line);
2088 if (tty_port_active(&info->port)) {
2089 if (info->dialing == 1)
2090 isdn_tty_modem_result(RESULT_BUSY, info);
2091 if (info->dialing > 1)
2092 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
2094 #ifdef ISDN_DEBUG_MODEM_HUP
2095 printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n");
2097 isdn_tty_modem_hup(info, 0);
2101 case ISDN_STAT_BCONN:
2102 #ifdef ISDN_TTY_STAT_DEBUG
2103 printk(KERN_DEBUG "tty_STAT_BCONN ttyI%d\n", info->line);
2105 /* Wake up any processes waiting
2106 * for incoming call of this device when
2107 * DCD follow the state of incoming carrier
2109 if (info->port.blocked_open &&
2110 (info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
2111 wake_up_interruptible(&info->port.open_wait);
2114 /* Schedule CONNECT-Message to any tty
2115 * waiting for it and
2116 * set DCD-bit of its modem-status.
2118 if (tty_port_active(&info->port) ||
2119 (info->port.blocked_open &&
2120 (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
2121 info->msr |= UART_MSR_DCD;
2122 info->emu.charge = 0;
2123 if (info->dialing & 0xf)
2129 if (USG_MODEM(dev->usage[i])) {
2130 if (info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) {
2131 strcpy(info->emu.connmsg, c->parm.num);
2132 isdn_tty_modem_result(RESULT_CONNECT, info);
2134 isdn_tty_modem_result(RESULT_CONNECT64000, info);
2136 if (USG_VOICE(dev->usage[i]))
2137 isdn_tty_modem_result(RESULT_VCON, info);
2141 case ISDN_STAT_BHUP:
2142 #ifdef ISDN_TTY_STAT_DEBUG
2143 printk(KERN_DEBUG "tty_STAT_BHUP ttyI%d\n", info->line);
2145 if (tty_port_active(&info->port)) {
2146 #ifdef ISDN_DEBUG_MODEM_HUP
2147 printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n");
2149 isdn_tty_modem_hup(info, 0);
2153 case ISDN_STAT_NODCH:
2154 #ifdef ISDN_TTY_STAT_DEBUG
2155 printk(KERN_DEBUG "tty_STAT_NODCH ttyI%d\n", info->line);
2157 if (tty_port_active(&info->port)) {
2158 if (info->dialing) {
2162 sprintf(info->last_cause, "0000");
2163 isdn_tty_modem_result(RESULT_NO_DIALTONE, info);
2165 isdn_tty_modem_hup(info, 0);
2169 case ISDN_STAT_UNLOAD:
2170 #ifdef ISDN_TTY_STAT_DEBUG
2171 printk(KERN_DEBUG "tty_STAT_UNLOAD ttyI%d\n", info->line);
2173 for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
2174 info = &dev->mdm.info[i];
2175 if (info->isdn_driver == c->driver) {
2177 isdn_tty_modem_hup(info, 1);
2181 #ifdef CONFIG_ISDN_TTY_FAX
2182 case ISDN_STAT_FAXIND:
2183 if (tty_port_active(&info->port)) {
2184 isdn_tty_fax_command(info, c);
2188 #ifdef CONFIG_ISDN_AUDIO
2189 case ISDN_STAT_AUDIO:
2190 if (tty_port_active(&info->port)) {
2191 switch (c->parm.num[0]) {
2192 case ISDN_AUDIO_DTMF:
2193 if (info->vonline) {
2194 isdn_audio_put_dle_code(info,
2207 /*********************************************************************
2208 Modem-Emulator-Routines
2209 *********************************************************************/
2211 #define cmdchar(c) ((c >= ' ') && (c <= 0x7f))
2214 * Put a message from the AT-emulator into receive-buffer of tty,
2215 * convert CR, LF, and BS to values in modem-registers 3, 4 and 5.
2218 isdn_tty_at_cout(char *msg, modem_info *info)
2220 struct tty_port *port = &info->port;
2221 atemu *m = &info->emu;
2225 struct sk_buff *skb = NULL;
2230 printk(KERN_WARNING "isdn_tty: Null-Message in isdn_tty_at_cout\n");
2236 spin_lock_irqsave(&info->readlock, flags);
2237 if (info->closing) {
2238 spin_unlock_irqrestore(&info->readlock, flags);
2242 /* use queue instead of direct, if online and */
2243 /* data is in queue or buffer is full */
2244 if (info->online && ((tty_buffer_request_room(port, l) < l) ||
2245 !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
2246 skb = alloc_skb(l, GFP_ATOMIC);
2248 spin_unlock_irqrestore(&info->readlock, flags);
2251 sp = skb_put(skb, l);
2252 #ifdef CONFIG_ISDN_AUDIO
2253 ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
2254 ISDN_AUDIO_SKB_LOCK(skb) = 0;
2258 for (p = msg; *p; p++) {
2261 c = m->mdmreg[REG_CR];
2264 c = m->mdmreg[REG_LF];
2267 c = m->mdmreg[REG_BS];
2275 if (tty_insert_flip_char(port, c, TTY_NORMAL) == 0)
2280 __skb_queue_tail(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel], skb);
2281 dev->drv[info->isdn_driver]->rcvcount[info->isdn_channel] += skb->len;
2282 spin_unlock_irqrestore(&info->readlock, flags);
2283 /* Schedule dequeuing */
2284 if (dev->modempoll && info->rcvsched)
2285 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
2288 spin_unlock_irqrestore(&info->readlock, flags);
2289 tty_flip_buffer_push(port);
2294 * Perform ATH Hangup
2297 isdn_tty_on_hook(modem_info *info)
2299 if (info->isdn_channel >= 0) {
2300 #ifdef ISDN_DEBUG_MODEM_HUP
2301 printk(KERN_DEBUG "Mhup in isdn_tty_on_hook\n");
2303 isdn_tty_modem_hup(info, 1);
2308 isdn_tty_off_hook(void)
2310 printk(KERN_DEBUG "isdn_tty_off_hook\n");
2313 #define PLUSWAIT1 (HZ / 2) /* 0.5 sec. */
2314 #define PLUSWAIT2 (HZ * 3 / 2) /* 1.5 sec */
2317 * Check Buffer for Modem-escape-sequence, activate timer-callback to
2318 * isdn_tty_modem_escape() if sequence found.
2321 * p pointer to databuffer
2322 * plus escape-character
2323 * count length of buffer
2324 * pluscount count of valid escape-characters so far
2325 * lastplus timestamp of last character
2328 isdn_tty_check_esc(const u_char *p, u_char plus, int count, int *pluscount,
2339 if (*(p++) == plus) {
2340 if ((*pluscount)++) {
2341 /* Time since last '+' > 0.5 sec. ? */
2342 if (time_after(jiffies, *lastplus + PLUSWAIT1))
2345 /* Time since last non-'+' < 1.5 sec. ? */
2346 if (time_before(jiffies, *lastplus + PLUSWAIT2))
2349 if ((*pluscount == 3) && (count == 1))
2350 isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, 1);
2355 *lastplus = jiffies;
2361 * Return result of AT-emulator to tty-receive-buffer, depending on
2362 * modem-register 12, bit 0 and 1.
2363 * For CONNECT-messages also switch to online-mode.
2364 * For RING-message handle auto-ATA if register 0 != 0
2368 isdn_tty_modem_result(int code, modem_info *info)
2370 atemu *m = &info->emu;
2371 static char *msg[] =
2372 {"OK", "CONNECT", "RING", "NO CARRIER", "ERROR",
2373 "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER",
2374 "RINGING", "NO MSN/EAZ", "VCON", "RUNG"};
2375 char s[ISDN_MSNLEN + 10];
2379 m->mdmreg[REG_RINGCNT]++;
2380 if (m->mdmreg[REG_RINGCNT] == m->mdmreg[REG_RINGATA])
2381 /* Automatically accept incoming call */
2382 isdn_tty_cmd_ATA(info);
2384 case RESULT_NO_CARRIER:
2385 #ifdef ISDN_DEBUG_MODEM_HUP
2386 printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
2387 info->closing, !info->port.tty);
2389 m->mdmreg[REG_RINGCNT] = 0;
2390 del_timer(&info->nc_timer);
2392 if (info->closing || !info->port.tty)
2395 #ifdef CONFIG_ISDN_AUDIO
2396 if (info->vonline & 1) {
2397 #ifdef ISDN_DEBUG_MODEM_VOICE
2398 printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n",
2401 /* voice-recording, add DLE-ETX */
2402 isdn_tty_at_cout("\020\003", info);
2404 if (info->vonline & 2) {
2405 #ifdef ISDN_DEBUG_MODEM_VOICE
2406 printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n",
2409 /* voice-playing, add DLE-DC4 */
2410 isdn_tty_at_cout("\020\024", info);
2414 case RESULT_CONNECT:
2415 case RESULT_CONNECT64000:
2416 sprintf(info->last_cause, "0000");
2421 #ifdef ISDN_DEBUG_MODEM_VOICE
2422 printk(KERN_DEBUG "res3: send VCON on ttyI%d\n",
2425 sprintf(info->last_cause, "0000");
2429 } /* switch (code) */
2431 if (m->mdmreg[REG_RESP] & BIT_RESP) {
2433 if (m->mdmreg[REG_RESPNUM] & BIT_RESPNUM) {
2434 /* Show numeric results only */
2435 sprintf(s, "\r\n%d\r\n", code);
2436 isdn_tty_at_cout(s, info);
2438 if (code == RESULT_RING) {
2439 /* return if "show RUNG" and ringcounter>1 */
2440 if ((m->mdmreg[REG_RUNG] & BIT_RUNG) &&
2441 (m->mdmreg[REG_RINGCNT] > 1))
2443 /* print CID, _before_ _every_ ring */
2444 if (!(m->mdmreg[REG_CIDONCE] & BIT_CIDONCE)) {
2445 isdn_tty_at_cout("\r\nCALLER NUMBER: ", info);
2446 isdn_tty_at_cout(dev->num[info->drv_index], info);
2447 if (m->mdmreg[REG_CDN] & BIT_CDN) {
2448 isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
2449 isdn_tty_at_cout(info->emu.cpn, info);
2453 isdn_tty_at_cout("\r\n", info);
2454 isdn_tty_at_cout(msg[code], info);
2456 case RESULT_CONNECT:
2457 switch (m->mdmreg[REG_L2PROT]) {
2458 case ISDN_PROTO_L2_MODEM:
2459 isdn_tty_at_cout(" ", info);
2460 isdn_tty_at_cout(m->connmsg, info);
2465 /* Append CPN, if enabled */
2466 if ((m->mdmreg[REG_CPN] & BIT_CPN)) {
2467 sprintf(s, "/%s", m->cpn);
2468 isdn_tty_at_cout(s, info);
2470 /* Print CID only once, _after_ 1st RING */
2471 if ((m->mdmreg[REG_CIDONCE] & BIT_CIDONCE) &&
2472 (m->mdmreg[REG_RINGCNT] == 1)) {
2473 isdn_tty_at_cout("\r\n", info);
2474 isdn_tty_at_cout("CALLER NUMBER: ", info);
2475 isdn_tty_at_cout(dev->num[info->drv_index], info);
2476 if (m->mdmreg[REG_CDN] & BIT_CDN) {
2477 isdn_tty_at_cout("\r\nCALLED NUMBER: ", info);
2478 isdn_tty_at_cout(info->emu.cpn, info);
2482 case RESULT_NO_CARRIER:
2483 case RESULT_NO_DIALTONE:
2485 case RESULT_NO_ANSWER:
2486 m->mdmreg[REG_RINGCNT] = 0;
2487 /* Append Cause-Message if enabled */
2488 if (m->mdmreg[REG_RESPXT] & BIT_RESPXT) {
2489 sprintf(s, "/%s", info->last_cause);
2490 isdn_tty_at_cout(s, info);
2493 case RESULT_CONNECT64000:
2494 /* Append Protocol to CONNECT message */
2495 switch (m->mdmreg[REG_L2PROT]) {
2496 case ISDN_PROTO_L2_X75I:
2497 case ISDN_PROTO_L2_X75UI:
2498 case ISDN_PROTO_L2_X75BUI:
2499 isdn_tty_at_cout("/X.75", info);
2501 case ISDN_PROTO_L2_HDLC:
2502 isdn_tty_at_cout("/HDLC", info);
2504 case ISDN_PROTO_L2_V11096:
2505 isdn_tty_at_cout("/V110/9600", info);
2507 case ISDN_PROTO_L2_V11019:
2508 isdn_tty_at_cout("/V110/19200", info);
2510 case ISDN_PROTO_L2_V11038:
2511 isdn_tty_at_cout("/V110/38400", info);
2514 if (m->mdmreg[REG_T70] & BIT_T70) {
2515 isdn_tty_at_cout("/T.70", info);
2516 if (m->mdmreg[REG_T70] & BIT_T70_EXT)
2517 isdn_tty_at_cout("+", info);
2521 isdn_tty_at_cout("\r\n", info);
2524 if (code == RESULT_NO_CARRIER) {
2525 if (info->closing || (!info->port.tty))
2528 if (tty_port_check_carrier(&info->port))
2529 tty_hangup(info->port.tty);
2535 * Display a modem-register-value.
2538 isdn_tty_show_profile(int ridx, modem_info *info)
2542 sprintf(v, "\r\n%d", info->emu.mdmreg[ridx]);
2543 isdn_tty_at_cout(v, info);
2547 * Get MSN-string from char-pointer, set pointer to end of number
2550 isdn_tty_get_msnstr(char *n, char **p)
2552 int limit = ISDN_MSNLEN - 1;
2554 while (((*p[0] >= '0' && *p[0] <= '9') ||
2555 /* Why a comma ??? */
2556 (*p[0] == ',') || (*p[0] == ':')) &&
2563 * Get phone-number from modem-commandbuffer
2566 isdn_tty_getdial(char *p, char *q, int cnt)
2569 int limit = ISDN_MSNLEN - 1; /* MUST match the size of interface var to avoid
2572 while (strchr(" 0123456789,#.*WPTSR-", *p) && *p && --cnt > 0) {
2573 if ((*p >= '0' && *p <= '9') || ((*p == 'S') && first) ||
2574 ((*p == 'R') && first) ||
2575 (*p == '*') || (*p == '#')) {
2587 #define PARSE_ERROR { isdn_tty_modem_result(RESULT_ERROR, info); return; }
2588 #define PARSE_ERROR1 { isdn_tty_modem_result(RESULT_ERROR, info); return 1; }
2591 isdn_tty_report(modem_info *info)
2593 atemu *m = &info->emu;
2596 isdn_tty_at_cout("\r\nStatistics of last connection:\r\n\r\n", info);
2597 sprintf(s, " Remote Number: %s\r\n", info->last_num);
2598 isdn_tty_at_cout(s, info);
2599 sprintf(s, " Direction: %s\r\n", info->last_dir ? "outgoing" : "incoming");
2600 isdn_tty_at_cout(s, info);
2601 isdn_tty_at_cout(" Layer-2 Protocol: ", info);
2602 switch (info->last_l2) {
2603 case ISDN_PROTO_L2_X75I:
2604 isdn_tty_at_cout("X.75i", info);
2606 case ISDN_PROTO_L2_X75UI:
2607 isdn_tty_at_cout("X.75ui", info);
2609 case ISDN_PROTO_L2_X75BUI:
2610 isdn_tty_at_cout("X.75bui", info);
2612 case ISDN_PROTO_L2_HDLC:
2613 isdn_tty_at_cout("HDLC", info);
2615 case ISDN_PROTO_L2_V11096:
2616 isdn_tty_at_cout("V.110 9600 Baud", info);
2618 case ISDN_PROTO_L2_V11019:
2619 isdn_tty_at_cout("V.110 19200 Baud", info);
2621 case ISDN_PROTO_L2_V11038:
2622 isdn_tty_at_cout("V.110 38400 Baud", info);
2624 case ISDN_PROTO_L2_TRANS:
2625 isdn_tty_at_cout("transparent", info);
2627 case ISDN_PROTO_L2_MODEM:
2628 isdn_tty_at_cout("modem", info);
2630 case ISDN_PROTO_L2_FAX:
2631 isdn_tty_at_cout("fax", info);
2634 isdn_tty_at_cout("unknown", info);
2637 if (m->mdmreg[REG_T70] & BIT_T70) {
2638 isdn_tty_at_cout("/T.70", info);
2639 if (m->mdmreg[REG_T70] & BIT_T70_EXT)
2640 isdn_tty_at_cout("+", info);
2642 isdn_tty_at_cout("\r\n", info);
2643 isdn_tty_at_cout(" Service: ", info);
2644 switch (info->last_si) {
2646 isdn_tty_at_cout("audio\r\n", info);
2649 isdn_tty_at_cout("btx\r\n", info);
2652 isdn_tty_at_cout("data\r\n", info);
2655 sprintf(s, "%d\r\n", info->last_si);
2656 isdn_tty_at_cout(s, info);
2659 sprintf(s, " Hangup location: %s\r\n", info->last_lhup ? "local" : "remote");
2660 isdn_tty_at_cout(s, info);
2661 sprintf(s, " Last cause: %s\r\n", info->last_cause);
2662 isdn_tty_at_cout(s, info);
2666 * Parse AT&.. commands.
2669 isdn_tty_cmd_ATand(char **p, modem_info *info)
2671 atemu *m = &info->emu;
2675 #define MAXRB (sizeof(rb) - 1)
2679 /* &B - Set Buffersize */
2682 if ((i < 0) || (i > ISDN_SERIAL_XMIT_MAX))
2684 #ifdef CONFIG_ISDN_AUDIO
2685 if ((m->mdmreg[REG_SI1] & 1) && (i > VBUF))
2688 m->mdmreg[REG_PSIZE] = i / 16;
2689 info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2690 switch (m->mdmreg[REG_L2PROT]) {
2691 case ISDN_PROTO_L2_V11096:
2692 case ISDN_PROTO_L2_V11019:
2693 case ISDN_PROTO_L2_V11038:
2694 info->xmit_size /= 10;
2698 /* &C - DCD Status */
2700 switch (isdn_getnum(p)) {
2702 m->mdmreg[REG_DCD] &= ~BIT_DCD;
2705 m->mdmreg[REG_DCD] |= BIT_DCD;
2712 /* &D - Set DTR-Low-behavior */
2714 switch (isdn_getnum(p)) {
2716 m->mdmreg[REG_DTRHUP] &= ~BIT_DTRHUP;
2717 m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
2720 m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
2721 m->mdmreg[REG_DTRR] &= ~BIT_DTRR;
2724 m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP;
2725 m->mdmreg[REG_DTRR] |= BIT_DTRR;
2732 /* &E -Set EAZ/MSN */
2734 isdn_tty_get_msnstr(m->msn, p);
2737 /* &F -Set Factory-Defaults */
2739 if (info->msr & UART_MSR_DCD)
2741 isdn_tty_reset_profile(m);
2742 isdn_tty_modem_reset_regs(info, 1);
2744 #ifdef DUMMY_HAYES_AT
2746 /* only for be compilant with common scripts */
2747 /* &K Flowcontrol - no function */
2753 /* &L -Set Numbers to listen on */
2756 while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
2757 (i < ISDN_LMSNLEN - 1))
2758 m->lmsn[i++] = *p[0]++;
2762 /* &R - Set V.110 bitrate adaption */
2767 /* Switch off V.110, back to X.75 */
2768 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2769 m->mdmreg[REG_SI2] = 0;
2770 info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2773 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11096;
2774 m->mdmreg[REG_SI2] = 197;
2775 info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2778 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11019;
2779 m->mdmreg[REG_SI2] = 199;
2780 info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2783 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11038;
2784 m->mdmreg[REG_SI2] = 198; /* no existing standard for this */
2785 info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10;
2790 /* Switch off T.70 */
2791 m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
2793 m->mdmreg[REG_SI1] |= 4;
2796 /* &S - Set Windowsize */
2799 if ((i > 0) && (i < 9))
2800 m->mdmreg[REG_WSIZE] = i;
2805 /* &V - Show registers */
2807 isdn_tty_at_cout("\r\n", info);
2808 for (i = 0; i < ISDN_MODEM_NUMREG; i++) {
2809 sprintf(rb, "S%02d=%03d%s", i,
2810 m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n");
2811 isdn_tty_at_cout(rb, info);
2813 sprintf(rb, "\r\nEAZ/MSN: %.50s\r\n",
2814 strlen(m->msn) ? m->msn : "None");
2815 isdn_tty_at_cout(rb, info);
2816 if (strlen(m->lmsn)) {
2817 isdn_tty_at_cout("\r\nListen: ", info);
2818 isdn_tty_at_cout(m->lmsn, info);
2819 isdn_tty_at_cout("\r\n", info);
2823 /* &W - Write Profile */
2828 modem_write_profile(m);
2835 /* &X - Switch to BTX-Mode and T.70 */
2837 switch (isdn_getnum(p)) {
2839 m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT);
2840 info->xmit_size = m->mdmreg[REG_PSIZE] * 16;
2843 m->mdmreg[REG_T70] |= BIT_T70;
2844 m->mdmreg[REG_T70] &= ~BIT_T70_EXT;
2845 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2846 info->xmit_size = 112;
2847 m->mdmreg[REG_SI1] = 4;
2848 m->mdmreg[REG_SI2] = 0;
2851 m->mdmreg[REG_T70] |= (BIT_T70 | BIT_T70_EXT);
2852 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
2853 info->xmit_size = 112;
2854 m->mdmreg[REG_SI1] = 4;
2855 m->mdmreg[REG_SI2] = 0;
2868 isdn_tty_check_ats(int mreg, int mval, modem_info *info, atemu *m)
2870 /* Some plausibility checks */
2873 if (mval > ISDN_PROTO_L2_MAX)
2877 if ((mval * 16) > ISDN_SERIAL_XMIT_MAX)
2879 #ifdef CONFIG_ISDN_AUDIO
2880 if ((m->mdmreg[REG_SI1] & 1) && (mval > VBUFX))
2883 info->xmit_size = mval * 16;
2884 switch (m->mdmreg[REG_L2PROT]) {
2885 case ISDN_PROTO_L2_V11096:
2886 case ISDN_PROTO_L2_V11019:
2887 case ISDN_PROTO_L2_V11038:
2888 info->xmit_size /= 10;
2894 /* readonly registers */
2901 * Perform ATS command
2904 isdn_tty_cmd_ATS(char **p, modem_info *info)
2906 atemu *m = &info->emu;
2912 mreg = isdn_getnum(p);
2913 if (mreg < 0 || mreg >= ISDN_MODEM_NUMREG)
2918 mval = isdn_getnum(p);
2919 if (mval < 0 || mval > 255)
2921 if (isdn_tty_check_ats(mreg, mval, info, m))
2923 m->mdmreg[mreg] = mval;
2926 /* Set/Clear a single bit */
2928 bitpos = isdn_getnum(p);
2929 if ((bitpos < 0) || (bitpos > 7))
2934 bval = isdn_getnum(p);
2935 if (bval < 0 || bval > 1)
2938 mval = m->mdmreg[mreg] | (1 << bitpos);
2940 mval = m->mdmreg[mreg] & ~(1 << bitpos);
2941 if (isdn_tty_check_ats(mreg, mval, info, m))
2943 m->mdmreg[mreg] = mval;
2947 isdn_tty_at_cout("\r\n", info);
2948 isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0",
2957 isdn_tty_show_profile(mreg, info);
2967 * Perform ATA command
2970 isdn_tty_cmd_ATA(modem_info *info)
2972 atemu *m = &info->emu;
2976 if (info->msr & UART_MSR_RI) {
2977 /* Accept incoming call */
2979 strcpy(info->last_num, dev->num[info->drv_index]);
2980 m->mdmreg[REG_RINGCNT] = 0;
2981 info->msr &= ~UART_MSR_RI;
2982 l2 = m->mdmreg[REG_L2PROT];
2983 #ifdef CONFIG_ISDN_AUDIO
2984 /* If more than one bit set in reg18, autoselect Layer2 */
2985 if ((m->mdmreg[REG_SI1] & m->mdmreg[REG_SI1I]) != m->mdmreg[REG_SI1]) {
2986 if (m->mdmreg[REG_SI1I] == 1) {
2987 if ((l2 != ISDN_PROTO_L2_MODEM) && (l2 != ISDN_PROTO_L2_FAX))
2988 l2 = ISDN_PROTO_L2_TRANS;
2990 l2 = ISDN_PROTO_L2_X75I;
2993 cmd.driver = info->isdn_driver;
2994 cmd.command = ISDN_CMD_SETL2;
2995 cmd.arg = info->isdn_channel + (l2 << 8);
2998 cmd.driver = info->isdn_driver;
2999 cmd.command = ISDN_CMD_SETL3;
3000 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8);
3001 #ifdef CONFIG_ISDN_TTY_FAX
3002 if (l2 == ISDN_PROTO_L2_FAX) {
3003 cmd.parm.fax = info->fax;
3004 info->fax->direction = ISDN_TTY_FAX_CONN_IN;
3008 cmd.driver = info->isdn_driver;
3009 cmd.arg = info->isdn_channel;
3010 cmd.command = ISDN_CMD_ACCEPTD;
3012 info->emu.carrierwait = 0;
3014 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1);
3016 isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3019 #ifdef CONFIG_ISDN_AUDIO
3021 * Parse AT+F.. commands
3024 isdn_tty_cmd_PLUSF(char **p, modem_info *info)
3026 atemu *m = &info->emu;
3029 if (!strncmp(p[0], "CLASS", 5)) {
3034 sprintf(rs, "\r\n%d",
3035 (m->mdmreg[REG_SI1] & 1) ? 8 : 0);
3036 #ifdef CONFIG_ISDN_TTY_FAX
3037 if (TTY_IS_FCLASS2(info))
3038 sprintf(rs, "\r\n2");
3039 else if (TTY_IS_FCLASS1(info))
3040 sprintf(rs, "\r\n1");
3042 isdn_tty_at_cout(rs, info);
3049 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
3050 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
3051 m->mdmreg[REG_SI1] = 4;
3053 m->mdmreg[REG_PSIZE] * 16;
3055 #ifdef CONFIG_ISDN_TTY_FAX
3058 if (!(dev->global_features &
3059 ISDN_FEATURE_L3_FCLASS1))
3061 m->mdmreg[REG_SI1] = 1;
3062 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
3063 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS1;
3065 m->mdmreg[REG_PSIZE] * 16;
3069 if (!(dev->global_features &
3070 ISDN_FEATURE_L3_FCLASS2))
3072 m->mdmreg[REG_SI1] = 1;
3073 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX;
3074 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS2;
3076 m->mdmreg[REG_PSIZE] * 16;
3081 /* L2 will change on dialout with si=1 */
3082 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I;
3083 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS;
3084 m->mdmreg[REG_SI1] = 5;
3085 info->xmit_size = VBUF;
3089 strcpy(rs, "\r\n0,");
3090 #ifdef CONFIG_ISDN_TTY_FAX
3091 if (dev->global_features &
3092 ISDN_FEATURE_L3_FCLASS1)
3094 if (dev->global_features &
3095 ISDN_FEATURE_L3_FCLASS2)
3099 isdn_tty_at_cout(rs, info);
3110 #ifdef CONFIG_ISDN_TTY_FAX
3111 return (isdn_tty_cmd_PLUSF_FAX(p, info));
3118 * Parse AT+V.. commands
3121 isdn_tty_cmd_PLUSV(char **p, modem_info *info)
3123 atemu *m = &info->emu;
3125 static char *vcmd[] =
3126 {"NH", "IP", "LS", "RX", "SD", "SM", "TX", "DD", NULL};
3134 if (!strncmp(vcmd[i], p[0], 2)) {
3142 /* AT+VNH - Auto hangup feature */
3146 isdn_tty_at_cout("\r\n1", info);
3156 isdn_tty_at_cout("\r\n1", info);
3167 /* AT+VIP - Reset all voice parameters */
3168 isdn_tty_modem_reset_vpar(m);
3171 /* AT+VLS - Select device, accept incoming call */
3175 sprintf(rs, "\r\n%d", m->vpar[0]);
3176 isdn_tty_at_cout(rs, info);
3191 isdn_tty_at_cout("\r\n0,2", info);
3202 /* AT+VRX - Start recording */
3205 if (info->online != 1) {
3206 isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3209 info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
3210 if (!info->dtmf_state) {
3211 printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
3214 info->silence_state = isdn_audio_silence_init(info->silence_state);
3215 if (!info->silence_state) {
3216 printk(KERN_WARNING "isdn_tty: Couldn't malloc silence state\n");
3219 if (m->vpar[3] < 5) {
3220 info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]);
3221 if (!info->adpcmr) {
3222 printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
3226 #ifdef ISDN_DEBUG_AT
3227 printk(KERN_DEBUG "AT: +VRX\n");
3230 isdn_tty_modem_result(RESULT_CONNECT, info);
3234 /* AT+VSD - Silence detection */
3238 sprintf(rs, "\r\n<%d>,<%d>",
3241 isdn_tty_at_cout(rs, info);
3245 if ((*p[0] >= '0') && (*p[0] <= '9')) {
3246 par1 = isdn_getnum(p);
3247 if ((par1 < 0) || (par1 > 31))
3252 par2 = isdn_getnum(p);
3253 if ((par2 < 0) || (par2 > 255))
3261 isdn_tty_at_cout("\r\n<0-31>,<0-255>",
3272 /* AT+VSM - Select compression */
3276 sprintf(rs, "\r\n<%d>,<%d><8000>",
3279 isdn_tty_at_cout(rs, info);
3289 par1 = isdn_getnum(p);
3290 if ((par1 < 2) || (par1 > 6))
3296 isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n",
3298 isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n",
3300 isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n",
3302 isdn_tty_at_cout("5;ALAW;8;0;(8000)\r\n",
3304 isdn_tty_at_cout("6;ULAW;8;0;(8000)\r\n",
3316 /* AT+VTX - Start sending */
3319 if (info->online != 1) {
3320 isdn_tty_modem_result(RESULT_NO_ANSWER, info);
3323 info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
3324 if (!info->dtmf_state) {
3325 printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
3328 if (m->vpar[3] < 5) {
3329 info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]);
3330 if (!info->adpcms) {
3331 printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
3335 #ifdef ISDN_DEBUG_AT
3336 printk(KERN_DEBUG "AT: +VTX\n");
3340 isdn_tty_modem_result(RESULT_CONNECT, info);
3344 /* AT+VDD - DTMF detection */
3348 sprintf(rs, "\r\n<%d>,<%d>",
3351 isdn_tty_at_cout(rs, info);
3355 if ((*p[0] >= '0') && (*p[0] <= '9')) {
3356 if (info->online != 1)
3358 par1 = isdn_getnum(p);
3359 if ((par1 < 0) || (par1 > 15))
3364 par2 = isdn_getnum(p);
3365 if ((par2 < 0) || (par2 > 255))
3369 cmd.driver = info->isdn_driver;
3370 cmd.command = ISDN_CMD_AUDIO;
3371 cmd.arg = info->isdn_channel + (ISDN_AUDIO_SETDD << 8);
3372 cmd.parm.num[0] = par1;
3373 cmd.parm.num[1] = par2;
3379 isdn_tty_at_cout("\r\n<0-15>,<0-255>",
3394 #endif /* CONFIG_ISDN_AUDIO */
3397 * Parse and perform an AT-command-line.
3400 isdn_tty_parse_at(modem_info *info)
3402 atemu *m = &info->emu;
3404 char ds[ISDN_MSNLEN];
3406 #ifdef ISDN_DEBUG_AT
3407 printk(KERN_DEBUG "AT: '%s'\n", m->mdmcmd);
3409 for (p = &m->mdmcmd[2]; *p;) {
3415 /* A - Accept incoming call */
3417 isdn_tty_cmd_ATA(info);
3421 if (info->msr & UART_MSR_DCD)
3423 if (info->msr & UART_MSR_RI) {
3424 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3427 isdn_tty_getdial(++p, ds, sizeof ds);
3429 if (!strlen(m->msn))
3430 isdn_tty_modem_result(RESULT_NO_MSN_EAZ, info);
3431 else if (strlen(ds))
3432 isdn_tty_dial(ds, info, m);
3437 /* E - Turn Echo on/off */
3439 switch (isdn_getnum(&p)) {
3441 m->mdmreg[REG_ECHO] &= ~BIT_ECHO;
3444 m->mdmreg[REG_ECHO] |= BIT_ECHO;
3451 /* H - On/Off-hook */
3456 isdn_tty_on_hook(info);
3460 isdn_tty_off_hook();
3463 isdn_tty_on_hook(info);
3468 /* I - Information */
3470 isdn_tty_at_cout("\r\nLinux ISDN", info);
3478 isdn_tty_report(info);
3482 snprintf(ds, sizeof(ds), "\r\n%d", info->emu.charge);
3483 isdn_tty_at_cout(ds, info);
3488 #ifdef DUMMY_HAYES_AT
3491 /* only for be compilant with common scripts */
3500 if (info->msr & UART_MSR_DCD)
3501 /* if B-Channel is up */
3502 isdn_tty_modem_result((m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) ? RESULT_CONNECT : RESULT_CONNECT64000, info);
3504 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3507 /* Q - Turn Emulator messages on/off */
3509 switch (isdn_getnum(&p)) {
3511 m->mdmreg[REG_RESP] |= BIT_RESP;
3514 m->mdmreg[REG_RESP] &= ~BIT_RESP;
3521 /* S - Set/Get Register */
3523 if (isdn_tty_cmd_ATS(&p, info))
3527 /* V - Numeric or ASCII Emulator-messages */
3529 switch (isdn_getnum(&p)) {
3531 m->mdmreg[REG_RESP] |= BIT_RESPNUM;
3534 m->mdmreg[REG_RESP] &= ~BIT_RESPNUM;
3541 /* Z - Load Registers from Profile */
3543 if (info->msr & UART_MSR_DCD) {
3545 isdn_tty_on_hook(info);
3547 isdn_tty_modem_reset_regs(info, 1);
3552 #ifdef CONFIG_ISDN_AUDIO
3555 if (isdn_tty_cmd_PLUSF(&p, info))
3559 if ((!(m->mdmreg[REG_SI1] & 1)) ||
3560 (m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM))
3563 if (isdn_tty_cmd_PLUSV(&p, info))
3566 #endif /* CONFIG_ISDN_AUDIO */
3567 case 'S': /* SUSPEND */
3569 isdn_tty_get_msnstr(ds, &p);
3570 isdn_tty_suspend(ds, info, m);
3572 case 'R': /* RESUME */
3574 isdn_tty_get_msnstr(ds, &p);
3575 isdn_tty_resume(ds, info, m);
3577 case 'M': /* MESSAGE */
3579 isdn_tty_send_msg(info, m, p);
3587 if (isdn_tty_cmd_ATand(&p, info))
3594 #ifdef CONFIG_ISDN_AUDIO
3597 isdn_tty_modem_result(RESULT_OK, info);
3600 /* Need own toupper() because standard-toupper is not available
3603 #define my_toupper(c) (((c >= 'a') && (c <= 'z')) ? (c & 0xdf) : c)
3606 * Perform line-editing of AT-commands
3610 * count length of buffer
3611 * channel index to line (minor-device)
3614 isdn_tty_edit_at(const char *p, int count, modem_info *info)
3616 atemu *m = &info->emu;
3622 for (cnt = count; cnt > 0; p++, cnt--) {
3625 if (c == m->mdmreg[REG_CR] || c == m->mdmreg[REG_LF]) {
3626 /* Separator (CR or LF) */
3627 m->mdmcmd[m->mdmcmdl] = 0;
3628 if (m->mdmreg[REG_ECHO] & BIT_ECHO) {
3631 isdn_tty_at_cout(eb, info);
3633 if ((m->mdmcmdl >= 2) && (!(strncmp(m->mdmcmd, "AT", 2))))
3634 isdn_tty_parse_at(info);
3638 if (c == m->mdmreg[REG_BS] && m->mdmreg[REG_BS] < 128) {
3639 /* Backspace-Function */
3640 if ((m->mdmcmdl > 2) || (!m->mdmcmdl)) {
3643 if (m->mdmreg[REG_ECHO] & BIT_ECHO)
3644 isdn_tty_at_cout("\b", info);
3649 if (m->mdmreg[REG_ECHO] & BIT_ECHO) {
3652 isdn_tty_at_cout(eb, info);
3654 if (m->mdmcmdl < 255) {
3656 switch (m->mdmcmdl) {
3659 m->mdmcmd[m->mdmcmdl] = c;
3660 m->mdmcmd[++m->mdmcmdl] = 0;
3664 /* Fall through, check for 'A' */
3667 m->mdmcmd[m->mdmcmdl] = c;
3668 m->mdmcmd[++m->mdmcmdl] = 0;
3672 m->mdmcmd[m->mdmcmdl] = c;
3673 m->mdmcmd[++m->mdmcmdl] = 0;
3682 * Switch all modem-channels who are online and got a valid
3683 * escape-sequence 1.5 seconds ago, to command-mode.
3684 * This function is called every second via timer-interrupt from within
3685 * timer-dispatcher isdn_timer_function()
3688 isdn_tty_modem_escape(void)
3694 for (i = 0; i < ISDN_MAX_CHANNELS; i++)
3695 if (USG_MODEM(dev->usage[i]) && (midx = dev->m_idx[i]) >= 0) {
3696 modem_info *info = &dev->mdm.info[midx];
3699 if ((info->emu.pluscount == 3) &&
3701 info->emu.lastplus + PLUSWAIT2)) {
3702 info->emu.pluscount = 0;
3704 isdn_tty_modem_result(RESULT_OK, info);
3708 isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton);
3712 * Put a RING-message to all modem-channels who have the RI-bit set.
3713 * This function is called every second via timer-interrupt from within
3714 * timer-dispatcher isdn_timer_function()
3717 isdn_tty_modem_ring(void)
3722 for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3723 modem_info *info = &dev->mdm.info[i];
3724 if (info->msr & UART_MSR_RI) {
3726 isdn_tty_modem_result(RESULT_RING, info);
3729 isdn_timer_ctrl(ISDN_TIMER_MODEMRING, ton);
3733 * For all online tty's, try sending data to
3737 isdn_tty_modem_xmit(void)
3742 for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3743 modem_info *info = &dev->mdm.info[i];
3746 isdn_tty_senddown(info);
3747 isdn_tty_tint(info);
3750 isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, ton);
3754 * Check all channels if we have a 'no carrier' timeout.
3755 * Timeout value is set by Register S7.
3758 isdn_tty_carrier_timeout(void)
3763 for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
3764 modem_info *info = &dev->mdm.info[i];
3767 if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
3769 isdn_tty_modem_result(RESULT_NO_CARRIER, info);
3770 isdn_tty_modem_hup(info, 1);
3774 isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton);