drivers/input/touchscreen/atmel_mxt_ts.c

   1 /*
   2  * Atmel maXTouch Touchscreen driver
   3  *
   4  * Copyright (C) 2010 Samsung Electronics Co.Ltd
   5  * Copyright (C) 2011-2014 Atmel Corporation
   6  * Copyright (C) 2012 Google, Inc.
   7  * Copyright (C) 2016 Zodiac Inflight Innovations
   8  *
   9  * Author: Joonyoung Shim <jy0922.shim@samsung.com>
  10  *
  11  * This program is free software; you can redistribute  it and/or modify it
  12  * under  the terms of  the GNU General  Public License as published by the
  13  * Free Software Foundation;  either version 2 of the  License, or (at your
  14  * option) any later version.
  15  *
  16  */
  17
  18 #include <linux/acpi.h>
  19 #include <linux/dmi.h>
  20 #include <linux/module.h>
  21 #include <linux/init.h>
  22 #include <linux/completion.h>
  23 #include <linux/delay.h>
  24 #include <linux/firmware.h>
  25 #include <linux/i2c.h>
  26 #include <linux/platform_data/atmel_mxt_ts.h>
  27 #include <linux/input/mt.h>
  28 #include <linux/interrupt.h>
  29 #include <linux/of.h>
  30 #include <linux/slab.h>
  31 #include <linux/gpio/consumer.h>
  32 #include <asm/unaligned.h>
  33 #include <media/v4l2-device.h>
  34 #include <media/v4l2-ioctl.h>
  35 #include <media/videobuf2-v4l2.h>
  36 #include <media/videobuf2-vmalloc.h>
  37
  38 /* Firmware files */
  39 #define MXT_FW_NAME             "/*(DEBLOBBED)*/"
  40 #define MXT_CFG_NAME            "maxtouch.cfg"
  41 #define MXT_CFG_MAGIC           "OBP_RAW V1"
  42
  43 /* Registers */
  44 #define MXT_OBJECT_START        0x07
  45 #define MXT_OBJECT_SIZE         6
  46 #define MXT_INFO_CHECKSUM_SIZE  3
  47 #define MXT_MAX_BLOCK_WRITE     256
  48
  49 /* Object types */
  50 #define MXT_DEBUG_DIAGNOSTIC_T37        37
  51 #define MXT_GEN_MESSAGE_T5              5
  52 #define MXT_GEN_COMMAND_T6              6
  53 #define MXT_GEN_POWER_T7                7
  54 #define MXT_GEN_ACQUIRE_T8              8
  55 #define MXT_GEN_DATASOURCE_T53          53
  56 #define MXT_TOUCH_MULTI_T9              9
  57 #define MXT_TOUCH_KEYARRAY_T15          15
  58 #define MXT_TOUCH_PROXIMITY_T23         23
  59 #define MXT_TOUCH_PROXKEY_T52           52
  60 #define MXT_PROCI_GRIPFACE_T20          20
  61 #define MXT_PROCG_NOISE_T22             22
  62 #define MXT_PROCI_ONETOUCH_T24          24
  63 #define MXT_PROCI_TWOTOUCH_T27          27
  64 #define MXT_PROCI_GRIP_T40              40
  65 #define MXT_PROCI_PALM_T41              41
  66 #define MXT_PROCI_TOUCHSUPPRESSION_T42  42
  67 #define MXT_PROCI_STYLUS_T47            47
  68 #define MXT_PROCG_NOISESUPPRESSION_T48  48
  69 #define MXT_SPT_COMMSCONFIG_T18         18
  70 #define MXT_SPT_GPIOPWM_T19             19
  71 #define MXT_SPT_SELFTEST_T25            25
  72 #define MXT_SPT_CTECONFIG_T28           28
  73 #define MXT_SPT_USERDATA_T38            38
  74 #define MXT_SPT_DIGITIZER_T43           43
  75 #define MXT_SPT_MESSAGECOUNT_T44        44
  76 #define MXT_SPT_CTECONFIG_T46           46
  77 #define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
  78
  79 /* MXT_GEN_MESSAGE_T5 object */
  80 #define MXT_RPTID_NOMSG         0xff
  81
  82 /* MXT_GEN_COMMAND_T6 field */
  83 #define MXT_COMMAND_RESET       0
  84 #define MXT_COMMAND_BACKUPNV    1
  85 #define MXT_COMMAND_CALIBRATE   2
  86 #define MXT_COMMAND_REPORTALL   3
  87 #define MXT_COMMAND_DIAGNOSTIC  5
  88
  89 /* Define for T6 status byte */
  90 #define MXT_T6_STATUS_RESET     (1 << 7)
  91 #define MXT_T6_STATUS_OFL       (1 << 6)
  92 #define MXT_T6_STATUS_SIGERR    (1 << 5)
  93 #define MXT_T6_STATUS_CAL       (1 << 4)
  94 #define MXT_T6_STATUS_CFGERR    (1 << 3)
  95 #define MXT_T6_STATUS_COMSERR   (1 << 2)
  96
  97 /* MXT_GEN_POWER_T7 field */
  98 struct t7_config {
  99         u8 idle;
 100         u8 active;
 101 } __packed;
 102
 103 #define MXT_POWER_CFG_RUN               0
 104 #define MXT_POWER_CFG_DEEPSLEEP         1
 105
 106 /* MXT_TOUCH_MULTI_T9 field */
 107 #define MXT_T9_CTRL             0
 108 #define MXT_T9_XSIZE            3
 109 #define MXT_T9_YSIZE            4
 110 #define MXT_T9_ORIENT           9
 111 #define MXT_T9_RANGE            18
 112
 113 /* MXT_TOUCH_MULTI_T9 status */
 114 #define MXT_T9_UNGRIP           (1 << 0)
 115 #define MXT_T9_SUPPRESS         (1 << 1)
 116 #define MXT_T9_AMP              (1 << 2)
 117 #define MXT_T9_VECTOR           (1 << 3)
 118 #define MXT_T9_MOVE             (1 << 4)
 119 #define MXT_T9_RELEASE          (1 << 5)
 120 #define MXT_T9_PRESS            (1 << 6)
 121 #define MXT_T9_DETECT           (1 << 7)
 122
 123 struct t9_range {
 124         __le16 x;
 125         __le16 y;
 126 } __packed;
 127
 128 /* MXT_TOUCH_MULTI_T9 orient */
 129 #define MXT_T9_ORIENT_SWITCH    (1 << 0)
 130 #define MXT_T9_ORIENT_INVERTX   (1 << 1)
 131 #define MXT_T9_ORIENT_INVERTY   (1 << 2)
 132
 133 /* MXT_SPT_COMMSCONFIG_T18 */
 134 #define MXT_COMMS_CTRL          0
 135 #define MXT_COMMS_CMD           1
 136
 137 /* MXT_DEBUG_DIAGNOSTIC_T37 */
 138 #define MXT_DIAGNOSTIC_PAGEUP   0x01
 139 #define MXT_DIAGNOSTIC_DELTAS   0x10
 140 #define MXT_DIAGNOSTIC_REFS     0x11
 141 #define MXT_DIAGNOSTIC_SIZE     128
 142
 143 #define MXT_FAMILY_1386                 160
 144 #define MXT1386_COLUMNS                 3
 145 #define MXT1386_PAGES_PER_COLUMN        8
 146
 147 struct t37_debug {
 148 #ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
 149         u8 mode;
 150         u8 page;
 151         u8 data[MXT_DIAGNOSTIC_SIZE];
 152 #endif
 153 };
 154
 155 /* Define for MXT_GEN_COMMAND_T6 */
 156 #define MXT_BOOT_VALUE          0xa5
 157 #define MXT_RESET_VALUE         0x01
 158 #define MXT_BACKUP_VALUE        0x55
 159
 160 /* T100 Multiple Touch Touchscreen */
 161 #define MXT_T100_CTRL           0
 162 #define MXT_T100_CFG1           1
 163 #define MXT_T100_TCHAUX         3
 164 #define MXT_T100_XSIZE          9
 165 #define MXT_T100_XRANGE         13
 166 #define MXT_T100_YSIZE          20
 167 #define MXT_T100_YRANGE         24
 168
 169 #define MXT_T100_CFG_SWITCHXY   BIT(5)
 170 #define MXT_T100_CFG_INVERTY    BIT(6)
 171 #define MXT_T100_CFG_INVERTX    BIT(7)
 172
 173 #define MXT_T100_TCHAUX_VECT    BIT(0)
 174 #define MXT_T100_TCHAUX_AMPL    BIT(1)
 175 #define MXT_T100_TCHAUX_AREA    BIT(2)
 176
 177 #define MXT_T100_DETECT         BIT(7)
 178 #define MXT_T100_TYPE_MASK      0x70
 179
 180 enum t100_type {
 181         MXT_T100_TYPE_FINGER            = 1,
 182         MXT_T100_TYPE_PASSIVE_STYLUS    = 2,
 183         MXT_T100_TYPE_HOVERING_FINGER   = 4,
 184         MXT_T100_TYPE_GLOVE             = 5,
 185         MXT_T100_TYPE_LARGE_TOUCH       = 6,
 186 };
 187
 188 #define MXT_DISTANCE_ACTIVE_TOUCH       0
 189 #define MXT_DISTANCE_HOVERING           1
 190
 191 #define MXT_TOUCH_MAJOR_DEFAULT         1
 192 #define MXT_PRESSURE_DEFAULT            1
 193
 194 /* Delay times */
 195 #define MXT_BACKUP_TIME         50      /* msec */
 196 #define MXT_RESET_TIME          200     /* msec */
 197 #define MXT_RESET_TIMEOUT       3000    /* msec */
 198 #define MXT_CRC_TIMEOUT         1000    /* msec */
 199 #define MXT_FW_RESET_TIME       3000    /* msec */
 200 #define MXT_FW_CHG_TIMEOUT      300     /* msec */
 201
 202 /* Command to unlock bootloader */
 203 #define MXT_UNLOCK_CMD_MSB      0xaa
 204 #define MXT_UNLOCK_CMD_LSB      0xdc
 205
 206 /* Bootloader mode status */
 207 #define MXT_WAITING_BOOTLOAD_CMD        0xc0    /* valid 7 6 bit only */
 208 #define MXT_WAITING_FRAME_DATA  0x80    /* valid 7 6 bit only */
 209 #define MXT_FRAME_CRC_CHECK     0x02
 210 #define MXT_FRAME_CRC_FAIL      0x03
 211 #define MXT_FRAME_CRC_PASS      0x04
 212 #define MXT_APP_CRC_FAIL        0x40    /* valid 7 8 bit only */
 213 #define MXT_BOOT_STATUS_MASK    0x3f
 214 #define MXT_BOOT_EXTENDED_ID    (1 << 5)
 215 #define MXT_BOOT_ID_MASK        0x1f
 216
 217 /* Touchscreen absolute values */
 218 #define MXT_MAX_AREA            0xff
 219
 220 #define MXT_PIXELS_PER_MM       20
 221
 222 struct mxt_info {
 223         u8 family_id;
 224         u8 variant_id;
 225         u8 version;
 226         u8 build;
 227         u8 matrix_xsize;
 228         u8 matrix_ysize;
 229         u8 object_num;
 230 };
 231
 232 struct mxt_object {
 233         u8 type;
 234         u16 start_address;
 235         u8 size_minus_one;
 236         u8 instances_minus_one;
 237         u8 num_report_ids;
 238 } __packed;
 239
 240 struct mxt_dbg {
 241         u16 t37_address;
 242         u16 diag_cmd_address;
 243         struct t37_debug *t37_buf;
 244         unsigned int t37_pages;
 245         unsigned int t37_nodes;
 246
 247         struct v4l2_device v4l2;
 248         struct v4l2_pix_format format;
 249         struct video_device vdev;
 250         struct vb2_queue queue;
 251         struct mutex lock;
 252         int input;
 253 };
 254
 255 enum v4l_dbg_inputs {
 256         MXT_V4L_INPUT_DELTAS,
 257         MXT_V4L_INPUT_REFS,
 258         MXT_V4L_INPUT_MAX,
 259 };
 260
 261 static const struct v4l2_file_operations mxt_video_fops = {
 262         .owner = THIS_MODULE,
 263         .open = v4l2_fh_open,
 264         .release = vb2_fop_release,
 265         .unlocked_ioctl = video_ioctl2,
 266         .read = vb2_fop_read,
 267         .mmap = vb2_fop_mmap,
 268         .poll = vb2_fop_poll,
 269 };
 270
 271 /* Each client has this additional data */
 272 struct mxt_data {
 273         struct i2c_client *client;
 274         struct input_dev *input_dev;
 275         char phys[64];          /* device physical location */
 276         const struct mxt_platform_data *pdata;
 277         struct mxt_object *object_table;
 278         struct mxt_info *info;
 279         void *raw_info_block;
 280         unsigned int irq;
 281         unsigned int max_x;
 282         unsigned int max_y;
 283         bool invertx;
 284         bool inverty;
 285         bool xy_switch;
 286         u8 xsize;
 287         u8 ysize;
 288         bool in_bootloader;
 289         u16 mem_size;
 290         u8 t100_aux_ampl;
 291         u8 t100_aux_area;
 292         u8 t100_aux_vect;
 293         u8 max_reportid;
 294         u32 config_crc;
 295         u32 info_crc;
 296         u8 bootloader_addr;
 297         u8 *msg_buf;
 298         u8 t6_status;
 299         bool update_input;
 300         u8 last_message_count;
 301         u8 num_touchids;
 302         u8 multitouch;
 303         struct t7_config t7_cfg;
 304         struct mxt_dbg dbg;
 305         struct gpio_desc *reset_gpio;
 306
 307         /* Cached parameters from object table */
 308         u16 T5_address;
 309         u8 T5_msg_size;
 310         u8 T6_reportid;
 311         u16 T6_address;
 312         u16 T7_address;
 313         u8 T9_reportid_min;
 314         u8 T9_reportid_max;
 315         u8 T19_reportid;
 316         u16 T44_address;
 317         u8 T100_reportid_min;
 318         u8 T100_reportid_max;
 319
 320         /* for fw update in bootloader */
 321         struct completion bl_completion;
 322
 323         /* for reset handling */
 324         struct completion reset_completion;
 325
 326         /* for config update handling */
 327         struct completion crc_completion;
 328 };
 329
 330 struct mxt_vb2_buffer {
 331         struct vb2_buffer       vb;
 332         struct list_head        list;
 333 };
 334
 335 static size_t mxt_obj_size(const struct mxt_object *obj)
 336 {
 337         return obj->size_minus_one + 1;
 338 }
 339
 340 static size_t mxt_obj_instances(const struct mxt_object *obj)
 341 {
 342         return obj->instances_minus_one + 1;
 343 }
 344
 345 static bool mxt_object_readable(unsigned int type)
 346 {
 347         switch (type) {
 348         case MXT_GEN_COMMAND_T6:
 349         case MXT_GEN_POWER_T7:
 350         case MXT_GEN_ACQUIRE_T8:
 351         case MXT_GEN_DATASOURCE_T53:
 352         case MXT_TOUCH_MULTI_T9:
 353         case MXT_TOUCH_KEYARRAY_T15:
 354         case MXT_TOUCH_PROXIMITY_T23:
 355         case MXT_TOUCH_PROXKEY_T52:
 356         case MXT_TOUCH_MULTITOUCHSCREEN_T100:
 357         case MXT_PROCI_GRIPFACE_T20:
 358         case MXT_PROCG_NOISE_T22:
 359         case MXT_PROCI_ONETOUCH_T24:
 360         case MXT_PROCI_TWOTOUCH_T27:
 361         case MXT_PROCI_GRIP_T40:
 362         case MXT_PROCI_PALM_T41:
 363         case MXT_PROCI_TOUCHSUPPRESSION_T42:
 364         case MXT_PROCI_STYLUS_T47:
 365         case MXT_PROCG_NOISESUPPRESSION_T48:
 366         case MXT_SPT_COMMSCONFIG_T18:
 367         case MXT_SPT_GPIOPWM_T19:
 368         case MXT_SPT_SELFTEST_T25:
 369         case MXT_SPT_CTECONFIG_T28:
 370         case MXT_SPT_USERDATA_T38:
 371         case MXT_SPT_DIGITIZER_T43:
 372         case MXT_SPT_CTECONFIG_T46:
 373                 return true;
 374         default:
 375                 return false;
 376         }
 377 }
 378
 379 static void mxt_dump_message(struct mxt_data *data, u8 *message)
 380 {
 381         dev_dbg(&data->client->dev, "message: %*ph\n",
 382                 data->T5_msg_size, message);
 383 }
 384
 385 static int mxt_wait_for_completion(struct mxt_data *data,
 386                                    struct completion *comp,
 387                                    unsigned int timeout_ms)
 388 {
 389         struct device *dev = &data->client->dev;
 390         unsigned long timeout = msecs_to_jiffies(timeout_ms);
 391         long ret;
 392
 393         ret = wait_for_completion_interruptible_timeout(comp, timeout);
 394         if (ret < 0) {
 395                 return ret;
 396         } else if (ret == 0) {
 397                 dev_err(dev, "Wait for completion timed out.\n");
 398                 return -ETIMEDOUT;
 399         }
 400         return 0;
 401 }
 402
 403 static int mxt_bootloader_read(struct mxt_data *data,
 404                                u8 *val, unsigned int count)
 405 {
 406         int ret;
 407         struct i2c_msg msg;
 408
 409         msg.addr = data->bootloader_addr;
 410         msg.flags = data->client->flags & I2C_M_TEN;
 411         msg.flags |= I2C_M_RD;
 412         msg.len = count;
 413         msg.buf = val;
 414
 415         ret = i2c_transfer(data->client->adapter, &msg, 1);
 416         if (ret == 1) {
 417                 ret = 0;
 418         } else {
 419                 ret = ret < 0 ? ret : -EIO;
 420                 dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
 421                         __func__, ret);
 422         }
 423
 424         return ret;
 425 }
 426
 427 static int mxt_bootloader_write(struct mxt_data *data,
 428                                 const u8 * const val, unsigned int count)
 429 {
 430         int ret;
 431         struct i2c_msg msg;
 432
 433         msg.addr = data->bootloader_addr;
 434         msg.flags = data->client->flags & I2C_M_TEN;
 435         msg.len = count;
 436         msg.buf = (u8 *)val;
 437
 438         ret = i2c_transfer(data->client->adapter, &msg, 1);
 439         if (ret == 1) {
 440                 ret = 0;
 441         } else {
 442                 ret = ret < 0 ? ret : -EIO;
 443                 dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
 444                         __func__, ret);
 445         }
 446
 447         return ret;
 448 }
 449
 450 static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
 451 {
 452         u8 appmode = data->client->addr;
 453         u8 bootloader;
 454         u8 family_id = data->info ? data->info->family_id : 0;
 455
 456         switch (appmode) {
 457         case 0x4a:
 458         case 0x4b:
 459                 /* Chips after 1664S use different scheme */
 460                 if (retry || family_id >= 0xa2) {
 461                         bootloader = appmode - 0x24;
 462                         break;
 463                 }
 464                 /* Fall through for normal case */
 465         case 0x4c:
 466         case 0x4d:
 467         case 0x5a:
 468         case 0x5b:
 469                 bootloader = appmode - 0x26;
 470                 break;
 471
 472         default:
 473                 dev_err(&data->client->dev,
 474                         "Appmode i2c address 0x%02x not found\n",
 475                         appmode);
 476                 return -EINVAL;
 477         }
 478
 479         data->bootloader_addr = bootloader;
 480         return 0;
 481 }
 482
 483 static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
 484 {
 485         struct device *dev = &data->client->dev;
 486         int error;
 487         u8 val;
 488         bool crc_failure;
 489
 490         error = mxt_lookup_bootloader_address(data, alt_address);
 491         if (error)
 492                 return error;
 493
 494         error = mxt_bootloader_read(data, &val, 1);
 495         if (error)
 496                 return error;
 497
 498         /* Check app crc fail mode */
 499         crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
 500
 501         dev_err(dev, "Detected bootloader, status:%02X%s\n",
 502                         val, crc_failure ? ", APP_CRC_FAIL" : "");
 503
 504         return 0;
 505 }
 506
 507 static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
 508 {
 509         struct device *dev = &data->client->dev;
 510         u8 buf[3];
 511
 512         if (val & MXT_BOOT_EXTENDED_ID) {
 513                 if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
 514                         dev_err(dev, "%s: i2c failure\n", __func__);
 515                         return val;
 516                 }
 517
 518                 dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]);
 519
 520                 return buf[0];
 521         } else {
 522                 dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK);
 523
 524                 return val;
 525         }
 526 }
 527
 528 static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
 529                                 bool wait)
 530 {
 531         struct device *dev = &data->client->dev;
 532         u8 val;
 533         int ret;
 534
 535 recheck:
 536         if (wait) {
 537                 /*
 538                  * In application update mode, the interrupt
 539                  * line signals state transitions. We must wait for the
 540                  * CHG assertion before reading the status byte.
 541                  * Once the status byte has been read, the line is deasserted.
 542                  */
 543                 ret = mxt_wait_for_completion(data, &data->bl_completion,
 544                                               MXT_FW_CHG_TIMEOUT);
 545                 if (ret) {
 546                         /*
 547                          * TODO: handle -ERESTARTSYS better by terminating
 548                          * fw update process before returning to userspace
 549                          * by writing length 0x000 to device (iff we are in
 550                          * WAITING_FRAME_DATA state).
 551                          */
 552                         dev_err(dev, "Update wait error %d\n", ret);
 553                         return ret;
 554                 }
 555         }
 556
 557         ret = mxt_bootloader_read(data, &val, 1);
 558         if (ret)
 559                 return ret;
 560
 561         if (state == MXT_WAITING_BOOTLOAD_CMD)
 562                 val = mxt_get_bootloader_version(data, val);
 563
 564         switch (state) {
 565         case MXT_WAITING_BOOTLOAD_CMD:
 566         case MXT_WAITING_FRAME_DATA:
 567         case MXT_APP_CRC_FAIL:
 568                 val &= ~MXT_BOOT_STATUS_MASK;
 569                 break;
 570         case MXT_FRAME_CRC_PASS:
 571                 if (val == MXT_FRAME_CRC_CHECK) {
 572                         goto recheck;
 573                 } else if (val == MXT_FRAME_CRC_FAIL) {
 574                         dev_err(dev, "Bootloader CRC fail\n");
 575                         return -EINVAL;
 576                 }
 577                 break;
 578         default:
 579                 return -EINVAL;
 580         }
 581
 582         if (val != state) {
 583                 dev_err(dev, "Invalid bootloader state %02X != %02X\n",
 584                         val, state);
 585                 return -EINVAL;
 586         }
 587
 588         return 0;
 589 }
 590
 591 static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
 592 {
 593         int ret;
 594         u8 buf[2];
 595
 596         if (unlock) {
 597                 buf[0] = MXT_UNLOCK_CMD_LSB;
 598                 buf[1] = MXT_UNLOCK_CMD_MSB;
 599         } else {
 600                 buf[0] = 0x01;
 601                 buf[1] = 0x01;
 602         }
 603
 604         ret = mxt_bootloader_write(data, buf, 2);
 605         if (ret)
 606                 return ret;
 607
 608         return 0;
 609 }
 610
 611 static int __mxt_read_reg(struct i2c_client *client,
 612                                u16 reg, u16 len, void *val)
 613 {
 614         struct i2c_msg xfer[2];
 615         u8 buf[2];
 616         int ret;
 617
 618         buf[0] = reg & 0xff;
 619         buf[1] = (reg >> 8) & 0xff;
 620
 621         /* Write register */
 622         xfer[0].addr = client->addr;
 623         xfer[0].flags = 0;
 624         xfer[0].len = 2;
 625         xfer[0].buf = buf;
 626
 627         /* Read data */
 628         xfer[1].addr = client->addr;
 629         xfer[1].flags = I2C_M_RD;
 630         xfer[1].len = len;
 631         xfer[1].buf = val;
 632
 633         ret = i2c_transfer(client->adapter, xfer, 2);
 634         if (ret == 2) {
 635                 ret = 0;
 636         } else {
 637                 if (ret >= 0)
 638                         ret = -EIO;
 639                 dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
 640                         __func__, ret);
 641         }
 642
 643         return ret;
 644 }
 645
 646 static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
 647                            const void *val)
 648 {
 649         u8 *buf;
 650         size_t count;
 651         int ret;
 652
 653         count = len + 2;
 654         buf = kmalloc(count, GFP_KERNEL);
 655         if (!buf)
 656                 return -ENOMEM;
 657
 658         buf[0] = reg & 0xff;
 659         buf[1] = (reg >> 8) & 0xff;
 660         memcpy(&buf[2], val, len);
 661
 662         ret = i2c_master_send(client, buf, count);
 663         if (ret == count) {
 664                 ret = 0;
 665         } else {
 666                 if (ret >= 0)
 667                         ret = -EIO;
 668                 dev_err(&client->dev, "%s: i2c send failed (%d)\n",
 669                         __func__, ret);
 670         }
 671
 672         kfree(buf);
 673         return ret;
 674 }
 675
 676 static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
 677 {
 678         return __mxt_write_reg(client, reg, 1, &val);
 679 }
 680
 681 static struct mxt_object *
 682 mxt_get_object(struct mxt_data *data, u8 type)
 683 {
 684         struct mxt_object *object;
 685         int i;
 686
 687         for (i = 0; i < data->info->object_num; i++) {
 688                 object = data->object_table + i;
 689                 if (object->type == type)
 690                         return object;
 691         }
 692
 693         dev_warn(&data->client->dev, "Invalid object type T%u\n", type);
 694         return NULL;
 695 }
 696
 697 static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
 698 {
 699         struct device *dev = &data->client->dev;
 700         u8 status = msg[1];
 701         u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16);
 702
 703         complete(&data->crc_completion);
 704
 705         if (crc != data->config_crc) {
 706                 data->config_crc = crc;
 707                 dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc);
 708         }
 709
 710         /* Detect reset */
 711         if (status & MXT_T6_STATUS_RESET)
 712                 complete(&data->reset_completion);
 713
 714         /* Output debug if status has changed */
 715         if (status != data->t6_status)
 716                 dev_dbg(dev, "T6 Status 0x%02X%s%s%s%s%s%s%s\n",
 717                         status,
 718                         status == 0 ? " OK" : "",
 719                         status & MXT_T6_STATUS_RESET ? " RESET" : "",
 720                         status & MXT_T6_STATUS_OFL ? " OFL" : "",
 721                         status & MXT_T6_STATUS_SIGERR ? " SIGERR" : "",
 722                         status & MXT_T6_STATUS_CAL ? " CAL" : "",
 723                         status & MXT_T6_STATUS_CFGERR ? " CFGERR" : "",
 724                         status & MXT_T6_STATUS_COMSERR ? " COMSERR" : "");
 725
 726         /* Save current status */
 727         data->t6_status = status;
 728 }
 729
 730 static int mxt_write_object(struct mxt_data *data,
 731                                  u8 type, u8 offset, u8 val)
 732 {
 733         struct mxt_object *object;
 734         u16 reg;
 735
 736         object = mxt_get_object(data, type);
 737         if (!object || offset >= mxt_obj_size(object))
 738                 return -EINVAL;
 739
 740         reg = object->start_address;
 741         return mxt_write_reg(data->client, reg + offset, val);
 742 }
 743
 744 static void mxt_input_button(struct mxt_data *data, u8 *message)
 745 {
 746         struct input_dev *input = data->input_dev;
 747         const struct mxt_platform_data *pdata = data->pdata;
 748         int i;
 749
 750         for (i = 0; i < pdata->t19_num_keys; i++) {
 751                 if (pdata->t19_keymap[i] == KEY_RESERVED)
 752                         continue;
 753
 754                 /* Active-low switch */
 755                 input_report_key(input, pdata->t19_keymap[i],
 756                                  !(message[1] & BIT(i)));
 757         }
 758 }
 759
 760 static void mxt_input_sync(struct mxt_data *data)
 761 {
 762         input_mt_report_pointer_emulation(data->input_dev,
 763                                           data->pdata->t19_num_keys);
 764         input_sync(data->input_dev);
 765 }
 766
 767 static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 768 {
 769         struct device *dev = &data->client->dev;
 770         struct input_dev *input_dev = data->input_dev;
 771         int id;
 772         u8 status;
 773         int x;
 774         int y;
 775         int area;
 776         int amplitude;
 777
 778         id = message[0] - data->T9_reportid_min;
 779         status = message[1];
 780         x = (message[2] << 4) | ((message[4] >> 4) & 0xf);
 781         y = (message[3] << 4) | ((message[4] & 0xf));
 782
 783         /* Handle 10/12 bit switching */
 784         if (data->max_x < 1024)
 785                 x >>= 2;
 786         if (data->max_y < 1024)
 787                 y >>= 2;
 788
 789         area = message[5];
 790         amplitude = message[6];
 791
 792         dev_dbg(dev,
 793                 "[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
 794                 id,
 795                 (status & MXT_T9_DETECT) ? 'D' : '.',
 796                 (status & MXT_T9_PRESS) ? 'P' : '.',
 797                 (status & MXT_T9_RELEASE) ? 'R' : '.',
 798                 (status & MXT_T9_MOVE) ? 'M' : '.',
 799                 (status & MXT_T9_VECTOR) ? 'V' : '.',
 800                 (status & MXT_T9_AMP) ? 'A' : '.',
 801                 (status & MXT_T9_SUPPRESS) ? 'S' : '.',
 802                 (status & MXT_T9_UNGRIP) ? 'U' : '.',
 803                 x, y, area, amplitude);
 804
 805         input_mt_slot(input_dev, id);
 806
 807         if (status & MXT_T9_DETECT) {
 808                 /*
 809                  * Multiple bits may be set if the host is slow to read
 810                  * the status messages, indicating all the events that
 811                  * have happened.
 812                  */
 813                 if (status & MXT_T9_RELEASE) {
 814                         input_mt_report_slot_state(input_dev,
 815                                                    MT_TOOL_FINGER, 0);
 816                         mxt_input_sync(data);
 817                 }
 818
 819                 /* Touch active */
 820                 input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1);
 821                 input_report_abs(input_dev, ABS_MT_POSITION_X, x);
 822                 input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
 823                 input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
 824                 input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
 825         } else {
 826                 /* Touch no longer active, close out slot */
 827                 input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
 828         }
 829
 830         data->update_input = true;
 831 }
 832
 833 static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
 834 {
 835         struct device *dev = &data->client->dev;
 836         struct input_dev *input_dev = data->input_dev;
 837         int id;
 838         u8 status;
 839         u8 type = 0;
 840         u16 x;
 841         u16 y;
 842         int distance = 0;
 843         int tool = 0;
 844         u8 major = 0;
 845         u8 pressure = 0;
 846         u8 orientation = 0;
 847
 848         id = message[0] - data->T100_reportid_min - 2;
 849
 850         /* ignore SCRSTATUS events */
 851         if (id < 0)
 852                 return;
 853
 854         status = message[1];
 855         x = get_unaligned_le16(&message[2]);
 856         y = get_unaligned_le16(&message[4]);
 857
 858         if (status & MXT_T100_DETECT) {
 859                 type = (status & MXT_T100_TYPE_MASK) >> 4;
 860
 861                 switch (type) {
 862                 case MXT_T100_TYPE_HOVERING_FINGER:
 863                         tool = MT_TOOL_FINGER;
 864                         distance = MXT_DISTANCE_HOVERING;
 865
 866                         if (data->t100_aux_vect)
 867                                 orientation = message[data->t100_aux_vect];
 868
 869                         break;
 870
 871                 case MXT_T100_TYPE_FINGER:
 872                 case MXT_T100_TYPE_GLOVE:
 873                         tool = MT_TOOL_FINGER;
 874                         distance = MXT_DISTANCE_ACTIVE_TOUCH;
 875
 876                         if (data->t100_aux_area)
 877                                 major = message[data->t100_aux_area];
 878
 879                         if (data->t100_aux_ampl)
 880                                 pressure = message[data->t100_aux_ampl];
 881
 882                         if (data->t100_aux_vect)
 883                                 orientation = message[data->t100_aux_vect];
 884
 885                         break;
 886
 887                 case MXT_T100_TYPE_PASSIVE_STYLUS:
 888                         tool = MT_TOOL_PEN;
 889
 890                         /*
 891                          * Passive stylus is reported with size zero so
 892                          * hardcode.
 893                          */
 894                         major = MXT_TOUCH_MAJOR_DEFAULT;
 895
 896                         if (data->t100_aux_ampl)
 897                                 pressure = message[data->t100_aux_ampl];
 898
 899                         break;
 900
 901                 case MXT_T100_TYPE_LARGE_TOUCH:
 902                         /* Ignore suppressed touch */
 903                         break;
 904
 905                 default:
 906                         dev_dbg(dev, "Unexpected T100 type\n");
 907                         return;
 908                 }
 909         }
 910
 911         /*
 912          * Values reported should be non-zero if tool is touching the
 913          * device
 914          */
 915         if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
 916                 pressure = MXT_PRESSURE_DEFAULT;
 917
 918         input_mt_slot(input_dev, id);
 919
 920         if (status & MXT_T100_DETECT) {
 921                 dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
 922                         id, type, x, y, major, pressure, orientation);
 923
 924                 input_mt_report_slot_state(input_dev, tool, 1);
 925                 input_report_abs(input_dev, ABS_MT_POSITION_X, x);
 926                 input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
 927                 input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, major);
 928                 input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
 929                 input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
 930                 input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
 931         } else {
 932                 dev_dbg(dev, "[%u] release\n", id);
 933
 934                 /* close out slot */
 935                 input_mt_report_slot_state(input_dev, 0, 0);
 936         }
 937
 938         data->update_input = true;
 939 }
 940
 941 static int mxt_proc_message(struct mxt_data *data, u8 *message)
 942 {
 943         u8 report_id = message[0];
 944
 945         if (report_id == MXT_RPTID_NOMSG)
 946                 return 0;
 947
 948         if (report_id == data->T6_reportid) {
 949                 mxt_proc_t6_messages(data, message);
 950         } else if (!data->input_dev) {
 951                 /*
 952                  * Do not report events if input device
 953                  * is not yet registered.
 954                  */
 955                 mxt_dump_message(data, message);
 956         } else if (report_id >= data->T9_reportid_min &&
 957                    report_id <= data->T9_reportid_max) {
 958                 mxt_proc_t9_message(data, message);
 959         } else if (report_id >= data->T100_reportid_min &&
 960                    report_id <= data->T100_reportid_max) {
 961                 mxt_proc_t100_message(data, message);
 962         } else if (report_id == data->T19_reportid) {
 963                 mxt_input_button(data, message);
 964                 data->update_input = true;
 965         } else {
 966                 mxt_dump_message(data, message);
 967         }
 968
 969         return 1;
 970 }
 971
 972 static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
 973 {
 974         struct device *dev = &data->client->dev;
 975         int ret;
 976         int i;
 977         u8 num_valid = 0;
 978
 979         /* Safety check for msg_buf */
 980         if (count > data->max_reportid)
 981                 return -EINVAL;
 982
 983         /* Process remaining messages if necessary */
 984         ret = __mxt_read_reg(data->client, data->T5_address,
 985                                 data->T5_msg_size * count, data->msg_buf);
 986         if (ret) {
 987                 dev_err(dev, "Failed to read %u messages (%d)\n", count, ret);
 988                 return ret;
 989         }
 990
 991         for (i = 0;  i < count; i++) {
 992                 ret = mxt_proc_message(data,
 993                         data->msg_buf + data->T5_msg_size * i);
 994
 995                 if (ret == 1)
 996                         num_valid++;
 997         }
 998
 999         /* return number of messages read */
1000         return num_valid;
1001 }
1002
1003 static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
1004 {
1005         struct device *dev = &data->client->dev;
1006         int ret;
1007         u8 count, num_left;
1008
1009         /* Read T44 and T5 together */
1010         ret = __mxt_read_reg(data->client, data->T44_address,
1011                 data->T5_msg_size + 1, data->msg_buf);
1012         if (ret) {
1013                 dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret);
1014                 return IRQ_NONE;
1015         }
1016
1017         count = data->msg_buf[0];
1018
1019         /*
1020          * This condition may be caused by the CHG line being configured in
1021          * Mode 0. It results in unnecessary I2C operations but it is benign.
1022          */
1023         if (count == 0)
1024                 return IRQ_NONE;
1025
1026         if (count > data->max_reportid) {
1027                 dev_warn(dev, "T44 count %d exceeded max report id\n", count);
1028                 count = data->max_reportid;
1029         }
1030
1031         /* Process first message */
1032         ret = mxt_proc_message(data, data->msg_buf + 1);
1033         if (ret < 0) {
1034                 dev_warn(dev, "Unexpected invalid message\n");
1035                 return IRQ_NONE;
1036         }
1037
1038         num_left = count - 1;
1039
1040         /* Process remaining messages if necessary */
1041         if (num_left) {
1042                 ret = mxt_read_and_process_messages(data, num_left);
1043                 if (ret < 0)
1044                         goto end;
1045                 else if (ret != num_left)
1046                         dev_warn(dev, "Unexpected invalid message\n");
1047         }
1048
1049 end:
1050         if (data->update_input) {
1051                 mxt_input_sync(data);
1052                 data->update_input = false;
1053         }
1054
1055         return IRQ_HANDLED;
1056 }
1057
1058 static int mxt_process_messages_until_invalid(struct mxt_data *data)
1059 {
1060         struct device *dev = &data->client->dev;
1061         int count, read;
1062         u8 tries = 2;
1063
1064         count = data->max_reportid;
1065
1066         /* Read messages until we force an invalid */
1067         do {
1068                 read = mxt_read_and_process_messages(data, count);
1069                 if (read < count)
1070                         return 0;
1071         } while (--tries);
1072
1073         if (data->update_input) {
1074                 mxt_input_sync(data);
1075                 data->update_input = false;
1076         }
1077
1078         dev_err(dev, "CHG pin isn't cleared\n");
1079         return -EBUSY;
1080 }
1081
1082 static irqreturn_t mxt_process_messages(struct mxt_data *data)
1083 {
1084         int total_handled, num_handled;
1085         u8 count = data->last_message_count;
1086
1087         if (count < 1 || count > data->max_reportid)
1088                 count = 1;
1089
1090         /* include final invalid message */
1091         total_handled = mxt_read_and_process_messages(data, count + 1);
1092         if (total_handled < 0)
1093                 return IRQ_NONE;
1094         /* if there were invalid messages, then we are done */
1095         else if (total_handled <= count)
1096                 goto update_count;
1097
1098         /* keep reading two msgs until one is invalid or reportid limit */
1099         do {
1100                 num_handled = mxt_read_and_process_messages(data, 2);
1101                 if (num_handled < 0)
1102                         return IRQ_NONE;
1103
1104                 total_handled += num_handled;
1105
1106                 if (num_handled < 2)
1107                         break;
1108         } while (total_handled < data->num_touchids);
1109
1110 update_count:
1111         data->last_message_count = total_handled;
1112
1113         if (data->update_input) {
1114                 mxt_input_sync(data);
1115                 data->update_input = false;
1116         }
1117
1118         return IRQ_HANDLED;
1119 }
1120
1121 static irqreturn_t mxt_interrupt(int irq, void *dev_id)
1122 {
1123         struct mxt_data *data = dev_id;
1124
1125         if (data->in_bootloader) {
1126                 /* bootloader state transition completion */
1127                 complete(&data->bl_completion);
1128                 return IRQ_HANDLED;
1129         }
1130
1131         if (!data->object_table)
1132                 return IRQ_HANDLED;
1133
1134         if (data->T44_address) {
1135                 return mxt_process_messages_t44(data);
1136         } else {
1137                 return mxt_process_messages(data);
1138         }
1139 }
1140
1141 static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
1142                           u8 value, bool wait)
1143 {
1144         u16 reg;
1145         u8 command_register;
1146         int timeout_counter = 0;
1147         int ret;
1148
1149         reg = data->T6_address + cmd_offset;
1150
1151         ret = mxt_write_reg(data->client, reg, value);
1152         if (ret)
1153                 return ret;
1154
1155         if (!wait)
1156                 return 0;
1157
1158         do {
1159                 msleep(20);
1160                 ret = __mxt_read_reg(data->client, reg, 1, &command_register);
1161                 if (ret)
1162                         return ret;
1163         } while (command_register != 0 && timeout_counter++ <= 100);
1164
1165         if (timeout_counter > 100) {
1166                 dev_err(&data->client->dev, "Command failed!\n");
1167                 return -EIO;
1168         }
1169
1170         return 0;
1171 }
1172
1173 static int mxt_acquire_irq(struct mxt_data *data)
1174 {
1175         int error;
1176
1177         enable_irq(data->irq);
1178
1179         error = mxt_process_messages_until_invalid(data);
1180         if (error)
1181                 return error;
1182
1183         return 0;
1184 }
1185
1186 static int mxt_soft_reset(struct mxt_data *data)
1187 {
1188         struct device *dev = &data->client->dev;
1189         int ret = 0;
1190
1191         dev_info(dev, "Resetting device\n");
1192
1193         disable_irq(data->irq);
1194
1195         reinit_completion(&data->reset_completion);
1196
1197         ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false);
1198         if (ret)
1199                 return ret;
1200
1201         /* Ignore CHG line for 100ms after reset */
1202         msleep(100);
1203
1204         mxt_acquire_irq(data);
1205
1206         ret = mxt_wait_for_completion(data, &data->reset_completion,
1207                                       MXT_RESET_TIMEOUT);
1208         if (ret)
1209                 return ret;
1210
1211         return 0;
1212 }
1213
1214 static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value)
1215 {
1216         /*
1217          * On failure, CRC is set to 0 and config will always be
1218          * downloaded.
1219          */
1220         data->config_crc = 0;
1221         reinit_completion(&data->crc_completion);
1222
1223         mxt_t6_command(data, cmd, value, true);
1224
1225         /*
1226          * Wait for crc message. On failure, CRC is set to 0 and config will
1227          * always be downloaded.
1228          */
1229         mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT);
1230 }
1231
1232 static void mxt_calc_crc24(u32 *crc, u8 firstbyte, u8 secondbyte)
1233 {
1234         static const unsigned int crcpoly = 0x80001B;
1235         u32 result;
1236         u32 data_word;
1237
1238         data_word = (secondbyte << 8) | firstbyte;
1239         result = ((*crc << 1) ^ data_word);
1240
1241         if (result & 0x1000000)
1242                 result ^= crcpoly;
1243
1244         *crc = result;
1245 }
1246
1247 static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
1248 {
1249         u32 crc = 0;
1250         u8 *ptr = base + start_off;
1251         u8 *last_val = base + end_off - 1;
1252
1253         if (end_off < start_off)
1254                 return -EINVAL;
1255
1256         while (ptr < last_val) {
1257                 mxt_calc_crc24(&crc, *ptr, *(ptr + 1));
1258                 ptr += 2;
1259         }
1260
1261         /* if len is odd, fill the last byte with 0 */
1262         if (ptr == last_val)
1263                 mxt_calc_crc24(&crc, *ptr, 0);
1264
1265         /* Mask to 24-bit */
1266         crc &= 0x00FFFFFF;
1267
1268         return crc;
1269 }
1270
1271 static int mxt_prepare_cfg_mem(struct mxt_data *data,
1272                                const struct firmware *cfg,
1273                                unsigned int data_pos,
1274                                unsigned int cfg_start_ofs,
1275                                u8 *config_mem,
1276                                size_t config_mem_size)
1277 {
1278         struct device *dev = &data->client->dev;
1279         struct mxt_object *object;
1280         unsigned int type, instance, size, byte_offset;
1281         int offset;
1282         int ret;
1283         int i;
1284         u16 reg;
1285         u8 val;
1286
1287         while (data_pos < cfg->size) {
1288                 /* Read type, instance, length */
1289                 ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
1290                              &type, &instance, &size, &offset);
1291                 if (ret == 0) {
1292                         /* EOF */
1293                         break;
1294                 } else if (ret != 3) {
1295                         dev_err(dev, "Bad format: failed to parse object\n");
1296                         return -EINVAL;
1297                 }
1298                 data_pos += offset;
1299
1300                 object = mxt_get_object(data, type);
1301                 if (!object) {
1302                         /* Skip object */
1303                         for (i = 0; i < size; i++) {
1304                                 ret = sscanf(cfg->data + data_pos, "%hhx%n",
1305                                              &val, &offset);
1306                                 if (ret != 1) {
1307                                         dev_err(dev, "Bad format in T%d at %d\n",
1308                                                 type, i);
1309                                         return -EINVAL;
1310                                 }
1311                                 data_pos += offset;
1312                         }
1313                         continue;
1314                 }
1315
1316                 if (size > mxt_obj_size(object)) {
1317                         /*
1318                          * Either we are in fallback mode due to wrong
1319                          * config or config from a later fw version,
1320                          * or the file is corrupt or hand-edited.
1321                          */
1322                         dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
1323                                  size - mxt_obj_size(object), type);
1324                 } else if (mxt_obj_size(object) > size) {
1325                         /*
1326                          * If firmware is upgraded, new bytes may be added to
1327                          * end of objects. It is generally forward compatible
1328                          * to zero these bytes - previous behaviour will be
1329                          * retained. However this does invalidate the CRC and
1330                          * will force fallback mode until the configuration is
1331                          * updated. We warn here but do nothing else - the
1332                          * malloc has zeroed the entire configuration.
1333                          */
1334                         dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
1335                                  mxt_obj_size(object) - size, type);
1336                 }
1337
1338                 if (instance >= mxt_obj_instances(object)) {
1339                         dev_err(dev, "Object instances exceeded!\n");
1340                         return -EINVAL;
1341                 }
1342
1343                 reg = object->start_address + mxt_obj_size(object) * instance;
1344
1345                 for (i = 0; i < size; i++) {
1346                         ret = sscanf(cfg->data + data_pos, "%hhx%n",
1347                                      &val,
1348                                      &offset);
1349                         if (ret != 1) {
1350                                 dev_err(dev, "Bad format in T%d at %d\n",
1351                                         type, i);
1352                                 return -EINVAL;
1353                         }
1354                         data_pos += offset;
1355
1356                         if (i > mxt_obj_size(object))
1357                                 continue;
1358
1359                         byte_offset = reg + i - cfg_start_ofs;
1360
1361                         if (byte_offset >= 0 && byte_offset < config_mem_size) {
1362                                 *(config_mem + byte_offset) = val;
1363                         } else {
1364                                 dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
1365                                         reg, object->type, byte_offset);
1366                                 return -EINVAL;
1367                         }
1368                 }
1369         }
1370
1371         return 0;
1372 }
1373
1374 static int mxt_upload_cfg_mem(struct mxt_data *data, unsigned int cfg_start,
1375                               u8 *config_mem, size_t config_mem_size)
1376 {
1377         unsigned int byte_offset = 0;
1378         int error;
1379
1380         /* Write configuration as blocks */
1381         while (byte_offset < config_mem_size) {
1382                 unsigned int size = config_mem_size - byte_offset;
1383
1384                 if (size > MXT_MAX_BLOCK_WRITE)
1385                         size = MXT_MAX_BLOCK_WRITE;
1386
1387                 error = __mxt_write_reg(data->client,
1388                                         cfg_start + byte_offset,
1389                                         size, config_mem + byte_offset);
1390                 if (error) {
1391                         dev_err(&data->client->dev,
1392                                 "Config write error, ret=%d\n", error);
1393                         return error;
1394                 }
1395
1396                 byte_offset += size;
1397         }
1398
1399         return 0;
1400 }
1401
1402 static int mxt_init_t7_power_cfg(struct mxt_data *data);
1403
1404 /*
1405  * mxt_update_cfg - download configuration to chip
1406  *
1407  * Atmel Raw Config File Format
1408  *
1409  * The first four lines of the raw config file contain:
1410  *  1) Version
1411  *  2) Chip ID Information (first 7 bytes of device memory)
1412  *  3) Chip Information Block 24-bit CRC Checksum
1413  *  4) Chip Configuration 24-bit CRC Checksum
1414  *
1415  * The rest of the file consists of one line per object instance:
1416  *   <TYPE> <INSTANCE> <SIZE> <CONTENTS>
1417  *
1418  *   <TYPE> - 2-byte object type as hex
1419  *   <INSTANCE> - 2-byte object instance number as hex
1420  *   <SIZE> - 2-byte object size as hex
1421  *   <CONTENTS> - array of <SIZE> 1-byte hex values
1422  */
1423 static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
1424 {
1425         struct device *dev = &data->client->dev;
1426         struct mxt_info cfg_info;
1427         int ret;
1428         int offset;
1429         int data_pos;
1430         int i;
1431         int cfg_start_ofs;
1432         u32 info_crc, config_crc, calculated_crc;
1433         u8 *config_mem;
1434         size_t config_mem_size;
1435
1436         mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
1437
1438         if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
1439                 dev_err(dev, "Unrecognised config file\n");
1440                 return -EINVAL;
1441         }
1442
1443         data_pos = strlen(MXT_CFG_MAGIC);
1444
1445         /* Load information block and check */
1446         for (i = 0; i < sizeof(struct mxt_info); i++) {
1447                 ret = sscanf(cfg->data + data_pos, "%hhx%n",
1448                              (unsigned char *)&cfg_info + i,
1449                              &offset);
1450                 if (ret != 1) {
1451                         dev_err(dev, "Bad format\n");
1452                         return -EINVAL;
1453                 }
1454
1455                 data_pos += offset;
1456         }
1457
1458         if (cfg_info.family_id != data->info->family_id) {
1459                 dev_err(dev, "Family ID mismatch!\n");
1460                 return -EINVAL;
1461         }
1462
1463         if (cfg_info.variant_id != data->info->variant_id) {
1464                 dev_err(dev, "Variant ID mismatch!\n");
1465                 return -EINVAL;
1466         }
1467
1468         /* Read CRCs */
1469         ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset);
1470         if (ret != 1) {
1471                 dev_err(dev, "Bad format: failed to parse Info CRC\n");
1472                 return -EINVAL;
1473         }
1474         data_pos += offset;
1475
1476         ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset);
1477         if (ret != 1) {
1478                 dev_err(dev, "Bad format: failed to parse Config CRC\n");
1479                 return -EINVAL;
1480         }
1481         data_pos += offset;
1482
1483         /*
1484          * The Info Block CRC is calculated over mxt_info and the object
1485          * table. If it does not match then we are trying to load the
1486          * configuration from a different chip or firmware version, so
1487          * the configuration CRC is invalid anyway.
1488          */
1489         if (info_crc == data->info_crc) {
1490                 if (config_crc == 0 || data->config_crc == 0) {
1491                         dev_info(dev, "CRC zero, attempting to apply config\n");
1492                 } else if (config_crc == data->config_crc) {
1493                         dev_dbg(dev, "Config CRC 0x%06X: OK\n",
1494                                  data->config_crc);
1495                         return 0;
1496                 } else {
1497                         dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
1498                                  data->config_crc, config_crc);
1499                 }
1500         } else {
1501                 dev_warn(dev,
1502                          "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
1503                          data->info_crc, info_crc);
1504         }
1505
1506         /* Malloc memory to store configuration */
1507         cfg_start_ofs = MXT_OBJECT_START +
1508                         data->info->object_num * sizeof(struct mxt_object) +
1509                         MXT_INFO_CHECKSUM_SIZE;
1510         config_mem_size = data->mem_size - cfg_start_ofs;
1511         config_mem = kzalloc(config_mem_size, GFP_KERNEL);
1512         if (!config_mem) {
1513                 dev_err(dev, "Failed to allocate memory\n");
1514                 return -ENOMEM;
1515         }
1516
1517         ret = mxt_prepare_cfg_mem(data, cfg, data_pos, cfg_start_ofs,
1518                                   config_mem, config_mem_size);
1519         if (ret)
1520                 goto release_mem;
1521
1522         /* Calculate crc of the received configs (not the raw config file) */
1523         if (data->T7_address < cfg_start_ofs) {
1524                 dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n",
1525                         data->T7_address, cfg_start_ofs);
1526                 ret = 0;
1527                 goto release_mem;
1528         }
1529
1530         calculated_crc = mxt_calculate_crc(config_mem,
1531                                            data->T7_address - cfg_start_ofs,
1532                                            config_mem_size);
1533
1534         if (config_crc > 0 && config_crc != calculated_crc)
1535                 dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n",
1536                          calculated_crc, config_crc);
1537
1538         ret = mxt_upload_cfg_mem(data, cfg_start_ofs,
1539                                  config_mem, config_mem_size);
1540         if (ret)
1541                 goto release_mem;
1542
1543         mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
1544
1545         ret = mxt_soft_reset(data);
1546         if (ret)
1547                 goto release_mem;
1548
1549         dev_info(dev, "Config successfully updated\n");
1550
1551         /* T7 config may have changed */
1552         mxt_init_t7_power_cfg(data);
1553
1554 release_mem:
1555         kfree(config_mem);
1556         return ret;
1557 }
1558
1559 static void mxt_free_input_device(struct mxt_data *data)
1560 {
1561         if (data->input_dev) {
1562                 input_unregister_device(data->input_dev);
1563                 data->input_dev = NULL;
1564         }
1565 }
1566
1567 static void mxt_free_object_table(struct mxt_data *data)
1568 {
1569 #ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
1570         video_unregister_device(&data->dbg.vdev);
1571         v4l2_device_unregister(&data->dbg.v4l2);
1572 #endif
1573         data->object_table = NULL;
1574         data->info = NULL;
1575         kfree(data->raw_info_block);
1576         data->raw_info_block = NULL;
1577         kfree(data->msg_buf);
1578         data->msg_buf = NULL;
1579         data->T5_address = 0;
1580         data->T5_msg_size = 0;
1581         data->T6_reportid = 0;
1582         data->T7_address = 0;
1583         data->T9_reportid_min = 0;
1584         data->T9_reportid_max = 0;
1585         data->T19_reportid = 0;
1586         data->T44_address = 0;
1587         data->T100_reportid_min = 0;
1588         data->T100_reportid_max = 0;
1589         data->max_reportid = 0;
1590 }
1591
1592 static int mxt_parse_object_table(struct mxt_data *data,
1593                                   struct mxt_object *object_table)
1594 {
1595         struct i2c_client *client = data->client;
1596         int i;
1597         u8 reportid;
1598         u16 end_address;
1599
1600         /* Valid Report IDs start counting from 1 */
1601         reportid = 1;
1602         data->mem_size = 0;
1603         for (i = 0; i < data->info->object_num; i++) {
1604                 struct mxt_object *object = object_table + i;
1605                 u8 min_id, max_id;
1606
1607                 le16_to_cpus(&object->start_address);
1608
1609                 if (object->num_report_ids) {
1610                         min_id = reportid;
1611                         reportid += object->num_report_ids *
1612                                         mxt_obj_instances(object);
1613                         max_id = reportid - 1;
1614                 } else {
1615                         min_id = 0;
1616                         max_id = 0;
1617                 }
1618
1619                 dev_dbg(&data->client->dev,
1620                         "T%u Start:%u Size:%zu Instances:%zu Report IDs:%u-%u\n",
1621                         object->type, object->start_address,
1622                         mxt_obj_size(object), mxt_obj_instances(object),
1623                         min_id, max_id);
1624
1625                 switch (object->type) {
1626                 case MXT_GEN_MESSAGE_T5:
1627                         if (data->info->family_id == 0x80 &&
1628                             data->info->version < 0x20) {
1629                                 /*
1630                                  * On mXT224 firmware versions prior to V2.0
1631                                  * read and discard unused CRC byte otherwise
1632                                  * DMA reads are misaligned.
1633                                  */
1634                                 data->T5_msg_size = mxt_obj_size(object);
1635                         } else {
1636                                 /* CRC not enabled, so skip last byte */
1637                                 data->T5_msg_size = mxt_obj_size(object) - 1;
1638                         }
1639                         data->T5_address = object->start_address;
1640                         break;
1641                 case MXT_GEN_COMMAND_T6:
1642                         data->T6_reportid = min_id;
1643                         data->T6_address = object->start_address;
1644                         break;
1645                 case MXT_GEN_POWER_T7:
1646                         data->T7_address = object->start_address;
1647                         break;
1648                 case MXT_TOUCH_MULTI_T9:
1649                         data->multitouch = MXT_TOUCH_MULTI_T9;
1650                         /* Only handle messages from first T9 instance */
1651                         data->T9_reportid_min = min_id;
1652                         data->T9_reportid_max = min_id +
1653                                                 object->num_report_ids - 1;
1654                         data->num_touchids = object->num_report_ids;
1655                         break;
1656                 case MXT_SPT_MESSAGECOUNT_T44:
1657                         data->T44_address = object->start_address;
1658                         break;
1659                 case MXT_SPT_GPIOPWM_T19:
1660                         data->T19_reportid = min_id;
1661                         break;
1662                 case MXT_TOUCH_MULTITOUCHSCREEN_T100:
1663                         data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
1664                         data->T100_reportid_min = min_id;
1665                         data->T100_reportid_max = max_id;
1666                         /* first two report IDs reserved */
1667                         data->num_touchids = object->num_report_ids - 2;
1668                         break;
1669                 }
1670
1671                 end_address = object->start_address
1672                         + mxt_obj_size(object) * mxt_obj_instances(object) - 1;
1673
1674                 if (end_address >= data->mem_size)
1675                         data->mem_size = end_address + 1;
1676         }
1677
1678         /* Store maximum reportid */
1679         data->max_reportid = reportid;
1680
1681         /* If T44 exists, T5 position has to be directly after */
1682         if (data->T44_address && (data->T5_address != data->T44_address + 1)) {
1683                 dev_err(&client->dev, "Invalid T44 position\n");
1684                 return -EINVAL;
1685         }
1686
1687         data->msg_buf = kcalloc(data->max_reportid,
1688                                 data->T5_msg_size, GFP_KERNEL);
1689         if (!data->msg_buf)
1690                 return -ENOMEM;
1691
1692         return 0;
1693 }
1694
1695 static int mxt_read_info_block(struct mxt_data *data)
1696 {
1697         struct i2c_client *client = data->client;
1698         int error;
1699         size_t size;
1700         void *id_buf, *buf;
1701         uint8_t num_objects;
1702         u32 calculated_crc;
1703         u8 *crc_ptr;
1704
1705         /* If info block already allocated, free it */
1706         if (data->raw_info_block)
1707                 mxt_free_object_table(data);
1708
1709         /* Read 7-byte ID information block starting at address 0 */
1710         size = sizeof(struct mxt_info);
1711         id_buf = kzalloc(size, GFP_KERNEL);
1712         if (!id_buf)
1713                 return -ENOMEM;
1714
1715         error = __mxt_read_reg(client, 0, size, id_buf);
1716         if (error)
1717                 goto err_free_mem;
1718
1719         /* Resize buffer to give space for rest of info block */
1720         num_objects = ((struct mxt_info *)id_buf)->object_num;
1721         size += (num_objects * sizeof(struct mxt_object))
1722                 + MXT_INFO_CHECKSUM_SIZE;
1723
1724         buf = krealloc(id_buf, size, GFP_KERNEL);
1725         if (!buf) {
1726                 error = -ENOMEM;
1727                 goto err_free_mem;
1728         }
1729         id_buf = buf;
1730
1731         /* Read rest of info block */
1732         error = __mxt_read_reg(client, MXT_OBJECT_START,
1733                                size - MXT_OBJECT_START,
1734                                id_buf + MXT_OBJECT_START);
1735         if (error)
1736                 goto err_free_mem;
1737
1738         /* Extract & calculate checksum */
1739         crc_ptr = id_buf + size - MXT_INFO_CHECKSUM_SIZE;
1740         data->info_crc = crc_ptr[0] | (crc_ptr[1] << 8) | (crc_ptr[2] << 16);
1741
1742         calculated_crc = mxt_calculate_crc(id_buf, 0,
1743                                            size - MXT_INFO_CHECKSUM_SIZE);
1744
1745         /*
1746          * CRC mismatch can be caused by data corruption due to I2C comms
1747          * issue or else device is not using Object Based Protocol (eg i2c-hid)
1748          */
1749         if ((data->info_crc == 0) || (data->info_crc != calculated_crc)) {
1750                 dev_err(&client->dev,
1751                         "Info Block CRC error calculated=0x%06X read=0x%06X\n",
1752                         calculated_crc, data->info_crc);
1753                 error = -EIO;
1754                 goto err_free_mem;
1755         }
1756
1757         data->raw_info_block = id_buf;
1758         data->info = (struct mxt_info *)id_buf;
1759
1760         dev_info(&client->dev,
1761                  "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
1762                  data->info->family_id, data->info->variant_id,
1763                  data->info->version >> 4, data->info->version & 0xf,
1764                  data->info->build, data->info->object_num);
1765
1766         /* Parse object table information */
1767         error = mxt_parse_object_table(data, id_buf + MXT_OBJECT_START);
1768         if (error) {
1769                 dev_err(&client->dev, "Error %d parsing object table\n", error);
1770                 mxt_free_object_table(data);
1771                 return error;
1772         }
1773
1774         data->object_table = (struct mxt_object *)(id_buf + MXT_OBJECT_START);
1775
1776         return 0;
1777
1778 err_free_mem:
1779         kfree(id_buf);
1780         return error;
1781 }
1782
1783 static int mxt_read_t9_resolution(struct mxt_data *data)
1784 {
1785         struct i2c_client *client = data->client;
1786         int error;
1787         struct t9_range range;
1788         unsigned char orient;
1789         struct mxt_object *object;
1790
1791         object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
1792         if (!object)
1793                 return -EINVAL;
1794
1795         error = __mxt_read_reg(client,
1796                                object->start_address + MXT_T9_XSIZE,
1797                                sizeof(data->xsize), &data->xsize);
1798         if (error)
1799                 return error;
1800
1801         error = __mxt_read_reg(client,
1802                                object->start_address + MXT_T9_YSIZE,
1803                                sizeof(data->ysize), &data->ysize);
1804         if (error)
1805                 return error;
1806
1807         error = __mxt_read_reg(client,
1808                                object->start_address + MXT_T9_RANGE,
1809                                sizeof(range), &range);
1810         if (error)
1811                 return error;
1812
1813         data->max_x = get_unaligned_le16(&range.x);
1814         data->max_y = get_unaligned_le16(&range.y);
1815
1816         error =  __mxt_read_reg(client,
1817                                 object->start_address + MXT_T9_ORIENT,
1818                                 1, &orient);
1819         if (error)
1820                 return error;
1821
1822         data->xy_switch = orient & MXT_T9_ORIENT_SWITCH;
1823         data->invertx = orient & MXT_T9_ORIENT_INVERTX;
1824         data->inverty = orient & MXT_T9_ORIENT_INVERTY;
1825
1826         return 0;
1827 }
1828
1829 static int mxt_read_t100_config(struct mxt_data *data)
1830 {
1831         struct i2c_client *client = data->client;
1832         int error;
1833         struct mxt_object *object;
1834         u16 range_x, range_y;
1835         u8 cfg, tchaux;
1836         u8 aux;
1837
1838         object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100);
1839         if (!object)
1840                 return -EINVAL;
1841
1842         /* read touchscreen dimensions */
1843         error = __mxt_read_reg(client,
1844                                object->start_address + MXT_T100_XRANGE,
1845                                sizeof(range_x), &range_x);
1846         if (error)
1847                 return error;
1848
1849         data->max_x = get_unaligned_le16(&range_x);
1850
1851         error = __mxt_read_reg(client,
1852                                object->start_address + MXT_T100_YRANGE,
1853                                sizeof(range_y), &range_y);
1854         if (error)
1855                 return error;
1856
1857         data->max_y = get_unaligned_le16(&range_y);
1858
1859         error = __mxt_read_reg(client,
1860                                object->start_address + MXT_T100_XSIZE,
1861                                sizeof(data->xsize), &data->xsize);
1862         if (error)
1863                 return error;
1864
1865         error = __mxt_read_reg(client,
1866                                object->start_address + MXT_T100_YSIZE,
1867                                sizeof(data->ysize), &data->ysize);
1868         if (error)
1869                 return error;
1870
1871         /* read orientation config */
1872         error =  __mxt_read_reg(client,
1873                                 object->start_address + MXT_T100_CFG1,
1874                                 1, &cfg);
1875         if (error)
1876                 return error;
1877
1878         data->xy_switch = cfg & MXT_T100_CFG_SWITCHXY;
1879         data->invertx = cfg & MXT_T100_CFG_INVERTX;
1880         data->inverty = cfg & MXT_T100_CFG_INVERTY;
1881
1882         /* allocate aux bytes */
1883         error =  __mxt_read_reg(client,
1884                                 object->start_address + MXT_T100_TCHAUX,
1885                                 1, &tchaux);
1886         if (error)
1887                 return error;
1888
1889         aux = 6;
1890
1891         if (tchaux & MXT_T100_TCHAUX_VECT)
1892                 data->t100_aux_vect = aux++;
1893
1894         if (tchaux & MXT_T100_TCHAUX_AMPL)
1895                 data->t100_aux_ampl = aux++;
1896
1897         if (tchaux & MXT_T100_TCHAUX_AREA)
1898                 data->t100_aux_area = aux++;
1899
1900         dev_dbg(&client->dev,
1901                 "T100 aux mappings vect:%u ampl:%u area:%u\n",
1902                 data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area);
1903
1904         return 0;
1905 }
1906
1907 static int mxt_input_open(struct input_dev *dev);
1908 static void mxt_input_close(struct input_dev *dev);
1909
1910 static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
1911                                    struct mxt_data *data)
1912 {
1913         const struct mxt_platform_data *pdata = data->pdata;
1914         int i;
1915
1916         input_dev->name = "Atmel maXTouch Touchpad";
1917
1918         __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
1919
1920         input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
1921         input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
1922         input_abs_set_res(input_dev, ABS_MT_POSITION_X,
1923                           MXT_PIXELS_PER_MM);
1924         input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
1925                           MXT_PIXELS_PER_MM);
1926
1927         for (i = 0; i < pdata->t19_num_keys; i++)
1928                 if (pdata->t19_keymap[i] != KEY_RESERVED)
1929                         input_set_capability(input_dev, EV_KEY,
1930                                              pdata->t19_keymap[i]);
1931 }
1932
1933 static int mxt_initialize_input_device(struct mxt_data *data)
1934 {
1935         const struct mxt_platform_data *pdata = data->pdata;
1936         struct device *dev = &data->client->dev;
1937         struct input_dev *input_dev;
1938         int error;
1939         unsigned int num_mt_slots;
1940         unsigned int mt_flags = 0;
1941
1942         switch (data->multitouch) {
1943         case MXT_TOUCH_MULTI_T9:
1944                 num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
1945                 error = mxt_read_t9_resolution(data);
1946                 if (error)
1947                         dev_warn(dev, "Failed to initialize T9 resolution\n");
1948                 break;
1949
1950         case MXT_TOUCH_MULTITOUCHSCREEN_T100:
1951                 num_mt_slots = data->num_touchids;
1952                 error = mxt_read_t100_config(data);
1953                 if (error)
1954                         dev_warn(dev, "Failed to read T100 config\n");
1955                 break;
1956
1957         default:
1958                 dev_err(dev, "Invalid multitouch object\n");
1959                 return -EINVAL;
1960         }
1961
1962         /* Handle default values and orientation switch */
1963         if (data->max_x == 0)
1964                 data->max_x = 1023;
1965
1966         if (data->max_y == 0)
1967                 data->max_y = 1023;
1968
1969         if (data->xy_switch)
1970                 swap(data->max_x, data->max_y);
1971
1972         dev_info(dev, "Touchscreen size X%uY%u\n", data->max_x, data->max_y);
1973
1974         /* Register input device */
1975         input_dev = input_allocate_device();
1976         if (!input_dev) {
1977                 dev_err(dev, "Failed to allocate memory\n");
1978                 return -ENOMEM;
1979         }
1980
1981         input_dev->name = "Atmel maXTouch Touchscreen";
1982         input_dev->phys = data->phys;
1983         input_dev->id.bustype = BUS_I2C;
1984         input_dev->dev.parent = dev;
1985         input_dev->open = mxt_input_open;
1986         input_dev->close = mxt_input_close;
1987
1988         input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
1989
1990         /* For single touch */
1991         input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0);
1992         input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0);
1993
1994         if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
1995             (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
1996              data->t100_aux_ampl)) {
1997                 input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
1998         }
1999
2000         /* If device has buttons we assume it is a touchpad */
2001         if (pdata->t19_num_keys) {
2002                 mxt_set_up_as_touchpad(input_dev, data);
2003                 mt_flags |= INPUT_MT_POINTER;
2004         } else {
2005                 mt_flags |= INPUT_MT_DIRECT;
2006         }
2007
2008         /* For multi touch */
2009         error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
2010         if (error) {
2011                 dev_err(dev, "Error %d initialising slots\n", error);
2012                 goto err_free_mem;
2013         }
2014
2015         if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100) {
2016                 input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
2017                                      0, MT_TOOL_MAX, 0, 0);
2018                 input_set_abs_params(input_dev, ABS_MT_DISTANCE,
2019                                      MXT_DISTANCE_ACTIVE_TOUCH,
2020                                      MXT_DISTANCE_HOVERING,
2021                                      0, 0);
2022         }
2023
2024         input_set_abs_params(input_dev, ABS_MT_POSITION_X,
2025                              0, data->max_x, 0, 0);
2026         input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
2027                              0, data->max_y, 0, 0);
2028
2029         if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
2030             (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
2031              data->t100_aux_area)) {
2032                 input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
2033                                      0, MXT_MAX_AREA, 0, 0);
2034         }
2035
2036         if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
2037             (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
2038              data->t100_aux_ampl)) {
2039                 input_set_abs_params(input_dev, ABS_MT_PRESSURE,
2040                                      0, 255, 0, 0);
2041         }
2042
2043         if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
2044             data->t100_aux_vect) {
2045                 input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
2046                                      0, 255, 0, 0);
2047         }
2048
2049         if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
2050             data->t100_aux_ampl) {
2051                 input_set_abs_params(input_dev, ABS_MT_PRESSURE,
2052                                      0, 255, 0, 0);
2053         }
2054
2055         if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
2056             data->t100_aux_vect) {
2057                 input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
2058                                      0, 255, 0, 0);
2059         }
2060
2061         input_set_drvdata(input_dev, data);
2062
2063         error = input_register_device(input_dev);
2064         if (error) {
2065                 dev_err(dev, "Error %d registering input device\n", error);
2066                 goto err_free_mem;
2067         }
2068
2069         data->input_dev = input_dev;
2070
2071         return 0;
2072
2073 err_free_mem:
2074         input_free_device(input_dev);
2075         return error;
2076 }
2077
2078 static int mxt_configure_objects(struct mxt_data *data,
2079                                  const struct firmware *cfg);
2080
2081 static void mxt_config_cb(const struct firmware *cfg, void *ctx)
2082 {
2083         mxt_configure_objects(ctx, cfg);
2084         release_firmware(cfg);
2085 }
2086
2087 static int mxt_initialize(struct mxt_data *data)
2088 {
2089         struct i2c_client *client = data->client;
2090         int recovery_attempts = 0;
2091         int error;
2092
2093         while (1) {
2094                 error = mxt_read_info_block(data);
2095                 if (!error)
2096                         break;
2097
2098                 /* Check bootloader state */
2099                 error = mxt_probe_bootloader(data, false);
2100                 if (error) {
2101                         dev_info(&client->dev, "Trying alternate bootloader address\n");
2102                         error = mxt_probe_bootloader(data, true);
2103                         if (error) {
2104                                 /* Chip is not in appmode or bootloader mode */
2105                                 return error;
2106                         }
2107                 }
2108
2109                 /* OK, we are in bootloader, see if we can recover */
2110                 if (++recovery_attempts > 1) {
2111                         dev_err(&client->dev, "Could not recover from bootloader mode\n");
2112                         /*
2113                          * We can reflash from this state, so do not
2114                          * abort initialization.
2115                          */
2116                         data->in_bootloader = true;
2117                         return 0;
2118                 }
2119
2120                 /* Attempt to exit bootloader into app mode */
2121                 mxt_send_bootloader_cmd(data, false);
2122                 msleep(MXT_FW_RESET_TIME);
2123         }
2124
2125         error = mxt_acquire_irq(data);
2126         if (error)
2127                 return error;
2128
2129         error = reject_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
2130                                         &client->dev, GFP_KERNEL, data,
2131                                         mxt_config_cb);
2132         if (error) {
2133                 dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
2134                         error);
2135                 return error;
2136         }
2137
2138         return 0;
2139 }
2140
2141 static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep)
2142 {
2143         struct device *dev = &data->client->dev;
2144         int error;
2145         struct t7_config *new_config;
2146         struct t7_config deepsleep = { .active = 0, .idle = 0 };
2147
2148         if (sleep == MXT_POWER_CFG_DEEPSLEEP)
2149                 new_config = &deepsleep;
2150         else
2151                 new_config = &data->t7_cfg;
2152
2153         error = __mxt_write_reg(data->client, data->T7_address,
2154                                 sizeof(data->t7_cfg), new_config);
2155         if (error)
2156                 return error;
2157
2158         dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n",
2159                 new_config->active, new_config->idle);
2160
2161         return 0;
2162 }
2163
2164 static int mxt_init_t7_power_cfg(struct mxt_data *data)
2165 {
2166         struct device *dev = &data->client->dev;
2167         int error;
2168         bool retry = false;
2169
2170 recheck:
2171         error = __mxt_read_reg(data->client, data->T7_address,
2172                                 sizeof(data->t7_cfg), &data->t7_cfg);
2173         if (error)
2174                 return error;
2175
2176         if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) {
2177                 if (!retry) {
2178                         dev_dbg(dev, "T7 cfg zero, resetting\n");
2179                         mxt_soft_reset(data);
2180                         retry = true;
2181                         goto recheck;
2182                 } else {
2183                         dev_dbg(dev, "T7 cfg zero after reset, overriding\n");
2184                         data->t7_cfg.active = 20;
2185                         data->t7_cfg.idle = 100;
2186                         return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
2187                 }
2188         }
2189
2190         dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n",
2191                 data->t7_cfg.active, data->t7_cfg.idle);
2192         return 0;
2193 }
2194
2195 #ifdef CONFIG_TOUCHSCREEN_ATMEL_MXT_T37
2196 static u16 mxt_get_debug_value(struct mxt_data *data, unsigned int x,
2197                                unsigned int y)
2198 {
2199         struct mxt_info *info = data->info;
2200         struct mxt_dbg *dbg = &data->dbg;
2201         unsigned int ofs, page;
2202         unsigned int col = 0;
2203         unsigned int col_width;
2204
2205         if (info->family_id == MXT_FAMILY_1386) {
2206                 col_width = info->matrix_ysize / MXT1386_COLUMNS;
2207                 col = y / col_width;
2208                 y = y % col_width;
2209         } else {
2210                 col_width = info->matrix_ysize;
2211         }
2212
2213         ofs = (y + (x * col_width)) * sizeof(u16);
2214         page = ofs / MXT_DIAGNOSTIC_SIZE;
2215         ofs %= MXT_DIAGNOSTIC_SIZE;
2216
2217         if (info->family_id == MXT_FAMILY_1386)
2218                 page += col * MXT1386_PAGES_PER_COLUMN;
2219
2220         return get_unaligned_le16(&dbg->t37_buf[page].data[ofs]);
2221 }
2222
2223 static int mxt_convert_debug_pages(struct mxt_data *data, u16 *outbuf)
2224 {
2225         struct mxt_dbg *dbg = &data->dbg;
2226         unsigned int x = 0;
2227         unsigned int y = 0;
2228         unsigned int i, rx, ry;
2229
2230         for (i = 0; i < dbg->t37_nodes; i++) {
2231                 /* Handle orientation */
2232                 rx = data->xy_switch ? y : x;
2233                 ry = data->xy_switch ? x : y;
2234                 rx = data->invertx ? (data->xsize - 1 - rx) : rx;
2235                 ry = data->inverty ? (data->ysize - 1 - ry) : ry;
2236
2237                 outbuf[i] = mxt_get_debug_value(data, rx, ry);
2238
2239                 /* Next value */
2240                 if (++x >= (data->xy_switch ? data->ysize : data->xsize)) {
2241                         x = 0;
2242                         y++;
2243                 }
2244         }
2245
2246         return 0;
2247 }
2248
2249 static int mxt_read_diagnostic_debug(struct mxt_data *data, u8 mode,
2250                                      u16 *outbuf)
2251 {
2252         struct mxt_dbg *dbg = &data->dbg;
2253         int retries = 0;
2254         int page;
2255         int ret;
2256         u8 cmd = mode;
2257         struct t37_debug *p;
2258         u8 cmd_poll;
2259
2260         for (page = 0; page < dbg->t37_pages; page++) {
2261                 p = dbg->t37_buf + page;
2262
2263                 ret = mxt_write_reg(data->client, dbg->diag_cmd_address,
2264                                     cmd);
2265                 if (ret)
2266                         return ret;
2267
2268                 retries = 0;
2269                 msleep(20);
2270 wait_cmd:
2271                 /* Read back command byte */
2272                 ret = __mxt_read_reg(data->client, dbg->diag_cmd_address,
2273                                      sizeof(cmd_poll), &cmd_poll);
2274                 if (ret)
2275                         return ret;
2276
2277                 /* Field is cleared once the command has been processed */
2278                 if (cmd_poll) {
2279                         if (retries++ > 100)
2280                                 return -EINVAL;
2281
2282                         msleep(20);
2283                         goto wait_cmd;
2284                 }
2285
2286                 /* Read T37 page */
2287                 ret = __mxt_read_reg(data->client, dbg->t37_address,
2288                                      sizeof(struct t37_debug), p);
2289                 if (ret)
2290                         return ret;
2291
2292                 if (p->mode != mode || p->page != page) {
2293                         dev_err(&data->client->dev, "T37 page mismatch\n");
2294                         return -EINVAL;
2295                 }
2296
2297                 dev_dbg(&data->client->dev, "%s page:%d retries:%d\n",
2298                         __func__, page, retries);
2299
2300                 /* For remaining pages, write PAGEUP rather than mode */
2301                 cmd = MXT_DIAGNOSTIC_PAGEUP;
2302         }
2303
2304         return mxt_convert_debug_pages(data, outbuf);
2305 }
2306
2307 static int mxt_queue_setup(struct vb2_queue *q,
2308                        unsigned int *nbuffers, unsigned int *nplanes,
2309                        unsigned int sizes[], struct device *alloc_devs[])
2310 {
2311         struct mxt_data *data = q->drv_priv;
2312         size_t size = data->dbg.t37_nodes * sizeof(u16);
2313
2314         if (*nplanes)
2315                 return sizes[0] < size ? -EINVAL : 0;
2316
2317         *nplanes = 1;
2318         sizes[0] = size;
2319
2320         return 0;
2321 }
2322
2323 static void mxt_buffer_queue(struct vb2_buffer *vb)
2324 {
2325         struct mxt_data *data = vb2_get_drv_priv(vb->vb2_queue);
2326         u16 *ptr;
2327         int ret;
2328         u8 mode;
2329
2330         ptr = vb2_plane_vaddr(vb, 0);
2331         if (!ptr) {
2332                 dev_err(&data->client->dev, "Error acquiring frame ptr\n");
2333                 goto fault;
2334         }
2335
2336         switch (data->dbg.input) {
2337         case MXT_V4L_INPUT_DELTAS:
2338         default:
2339                 mode = MXT_DIAGNOSTIC_DELTAS;
2340                 break;
2341
2342         case MXT_V4L_INPUT_REFS:
2343                 mode = MXT_DIAGNOSTIC_REFS;
2344                 break;
2345         }
2346
2347         ret = mxt_read_diagnostic_debug(data, mode, ptr);
2348         if (ret)
2349                 goto fault;
2350
2351         vb2_set_plane_payload(vb, 0, data->dbg.t37_nodes * sizeof(u16));
2352         vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
2353         return;
2354
2355 fault:
2356         vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
2357 }
2358
2359 /* V4L2 structures */
2360 static const struct vb2_ops mxt_queue_ops = {
2361         .queue_setup            = mxt_queue_setup,
2362         .buf_queue              = mxt_buffer_queue,
2363         .wait_prepare           = vb2_ops_wait_prepare,
2364         .wait_finish            = vb2_ops_wait_finish,
2365 };
2366
2367 static const struct vb2_queue mxt_queue = {
2368         .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
2369         .io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ,
2370         .buf_struct_size = sizeof(struct mxt_vb2_buffer),
2371         .ops = &mxt_queue_ops,
2372         .mem_ops = &vb2_vmalloc_memops,
2373         .timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC,
2374         .min_buffers_needed = 1,
2375 };
2376
2377 static int mxt_vidioc_querycap(struct file *file, void *priv,
2378                                  struct v4l2_capability *cap)
2379 {
2380         struct mxt_data *data = video_drvdata(file);
2381
2382         strlcpy(cap->driver, "atmel_mxt_ts", sizeof(cap->driver));
2383         strlcpy(cap->card, "atmel_mxt_ts touch", sizeof(cap->card));
2384         snprintf(cap->bus_info, sizeof(cap->bus_info),
2385                  "I2C:%s", dev_name(&data->client->dev));
2386         return 0;
2387 }
2388
2389 static int mxt_vidioc_enum_input(struct file *file, void *priv,
2390                                    struct v4l2_input *i)
2391 {
2392         if (i->index >= MXT_V4L_INPUT_MAX)
2393                 return -EINVAL;
2394
2395         i->type = V4L2_INPUT_TYPE_TOUCH;
2396
2397         switch (i->index) {
2398         case MXT_V4L_INPUT_REFS:
2399                 strlcpy(i->name, "Mutual Capacitance References",
2400                         sizeof(i->name));
2401                 break;
2402         case MXT_V4L_INPUT_DELTAS:
2403                 strlcpy(i->name, "Mutual Capacitance Deltas", sizeof(i->name));
2404                 break;
2405         }
2406
2407         return 0;
2408 }
2409
2410 static int mxt_set_input(struct mxt_data *data, unsigned int i)
2411 {
2412         struct v4l2_pix_format *f = &data->dbg.format;
2413
2414         if (i >= MXT_V4L_INPUT_MAX)
2415                 return -EINVAL;
2416
2417         if (i == MXT_V4L_INPUT_DELTAS)
2418                 f->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
2419         else
2420                 f->pixelformat = V4L2_TCH_FMT_TU16;
2421
2422         f->width = data->xy_switch ? data->ysize : data->xsize;
2423         f->height = data->xy_switch ? data->xsize : data->ysize;
2424         f->field = V4L2_FIELD_NONE;
2425         f->colorspace = V4L2_COLORSPACE_RAW;
2426         f->bytesperline = f->width * sizeof(u16);
2427         f->sizeimage = f->width * f->height * sizeof(u16);
2428
2429         data->dbg.input = i;
2430
2431         return 0;
2432 }
2433
2434 static int mxt_vidioc_s_input(struct file *file, void *priv, unsigned int i)
2435 {
2436         return mxt_set_input(video_drvdata(file), i);
2437 }
2438
2439 static int mxt_vidioc_g_input(struct file *file, void *priv, unsigned int *i)
2440 {
2441         struct mxt_data *data = video_drvdata(file);
2442
2443         *i = data->dbg.input;
2444
2445         return 0;
2446 }
2447
2448 static int mxt_vidioc_fmt(struct file *file, void *priv, struct v4l2_format *f)
2449 {
2450         struct mxt_data *data = video_drvdata(file);
2451
2452         f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
2453         f->fmt.pix = data->dbg.format;
2454
2455         return 0;
2456 }
2457
2458 static int mxt_vidioc_enum_fmt(struct file *file, void *priv,
2459                                  struct v4l2_fmtdesc *fmt)
2460 {
2461         if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
2462                 return -EINVAL;
2463
2464         switch (fmt->index) {
2465         case 0:
2466                 fmt->pixelformat = V4L2_TCH_FMT_TU16;
2467                 break;
2468
2469         case 1:
2470                 fmt->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
2471                 break;
2472
2473         default:
2474                 return -EINVAL;
2475         }
2476
2477         return 0;
2478 }
2479
2480 static int mxt_vidioc_g_parm(struct file *file, void *fh,
2481                              struct v4l2_streamparm *a)
2482 {
2483         if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
2484                 return -EINVAL;
2485
2486         a->parm.capture.readbuffers = 1;
2487         a->parm.capture.timeperframe.numerator = 1;
2488         a->parm.capture.timeperframe.denominator = 10;
2489         return 0;
2490 }
2491
2492 static const struct v4l2_ioctl_ops mxt_video_ioctl_ops = {
2493         .vidioc_querycap        = mxt_vidioc_querycap,
2494
2495         .vidioc_enum_fmt_vid_cap = mxt_vidioc_enum_fmt,
2496         .vidioc_s_fmt_vid_cap   = mxt_vidioc_fmt,
2497         .vidioc_g_fmt_vid_cap   = mxt_vidioc_fmt,
2498         .vidioc_try_fmt_vid_cap = mxt_vidioc_fmt,
2499         .vidioc_g_parm          = mxt_vidioc_g_parm,
2500
2501         .vidioc_enum_input      = mxt_vidioc_enum_input,
2502         .vidioc_g_input         = mxt_vidioc_g_input,
2503         .vidioc_s_input         = mxt_vidioc_s_input,
2504
2505         .vidioc_reqbufs         = vb2_ioctl_reqbufs,
2506         .vidioc_create_bufs     = vb2_ioctl_create_bufs,
2507         .vidioc_querybuf        = vb2_ioctl_querybuf,
2508         .vidioc_qbuf            = vb2_ioctl_qbuf,
2509         .vidioc_dqbuf           = vb2_ioctl_dqbuf,
2510         .vidioc_expbuf          = vb2_ioctl_expbuf,
2511
2512         .vidioc_streamon        = vb2_ioctl_streamon,
2513         .vidioc_streamoff       = vb2_ioctl_streamoff,
2514 };
2515
2516 static const struct video_device mxt_video_device = {
2517         .name = "Atmel maxTouch",
2518         .fops = &mxt_video_fops,
2519         .ioctl_ops = &mxt_video_ioctl_ops,
2520         .release = video_device_release_empty,
2521         .device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TOUCH |
2522                        V4L2_CAP_READWRITE | V4L2_CAP_STREAMING,
2523 };
2524
2525 static void mxt_debug_init(struct mxt_data *data)
2526 {
2527         struct mxt_info *info = data->info;
2528         struct mxt_dbg *dbg = &data->dbg;
2529         struct mxt_object *object;
2530         int error;
2531
2532         object = mxt_get_object(data, MXT_GEN_COMMAND_T6);
2533         if (!object)
2534                 goto error;
2535
2536         dbg->diag_cmd_address = object->start_address + MXT_COMMAND_DIAGNOSTIC;
2537
2538         object = mxt_get_object(data, MXT_DEBUG_DIAGNOSTIC_T37);
2539         if (!object)
2540                 goto error;
2541
2542         if (mxt_obj_size(object) != sizeof(struct t37_debug)) {
2543                 dev_warn(&data->client->dev, "Bad T37 size");
2544                 goto error;
2545         }
2546
2547         dbg->t37_address = object->start_address;
2548
2549         /* Calculate size of data and allocate buffer */
2550         dbg->t37_nodes = data->xsize * data->ysize;
2551
2552         if (info->family_id == MXT_FAMILY_1386)
2553                 dbg->t37_pages = MXT1386_COLUMNS * MXT1386_PAGES_PER_COLUMN;
2554         else
2555                 dbg->t37_pages = DIV_ROUND_UP(data->xsize *
2556                                               info->matrix_ysize *
2557                                               sizeof(u16),
2558                                               sizeof(dbg->t37_buf->data));
2559
2560         dbg->t37_buf = devm_kmalloc_array(&data->client->dev, dbg->t37_pages,
2561                                           sizeof(struct t37_debug), GFP_KERNEL);
2562         if (!dbg->t37_buf)
2563                 goto error;
2564
2565         /* init channel to zero */
2566         mxt_set_input(data, 0);
2567
2568         /* register video device */
2569         snprintf(dbg->v4l2.name, sizeof(dbg->v4l2.name), "%s", "atmel_mxt_ts");
2570         error = v4l2_device_register(&data->client->dev, &dbg->v4l2);
2571         if (error)
2572                 goto error;
2573
2574         /* initialize the queue */
2575         mutex_init(&dbg->lock);
2576         dbg->queue = mxt_queue;
2577         dbg->queue.drv_priv = data;
2578         dbg->queue.lock = &dbg->lock;
2579         dbg->queue.dev = &data->client->dev;
2580
2581         error = vb2_queue_init(&dbg->queue);
2582         if (error)
2583                 goto error_unreg_v4l2;
2584
2585         dbg->vdev = mxt_video_device;
2586         dbg->vdev.v4l2_dev = &dbg->v4l2;
2587         dbg->vdev.lock = &dbg->lock;
2588         dbg->vdev.vfl_dir = VFL_DIR_RX;
2589         dbg->vdev.queue = &dbg->queue;
2590         video_set_drvdata(&dbg->vdev, data);
2591
2592         error = video_register_device(&dbg->vdev, VFL_TYPE_TOUCH, -1);
2593         if (error)
2594                 goto error_unreg_v4l2;
2595
2596         return;
2597
2598 error_unreg_v4l2:
2599         v4l2_device_unregister(&dbg->v4l2);
2600 error:
2601         dev_warn(&data->client->dev, "Error initializing T37\n");
2602 }
2603 #else
2604 static void mxt_debug_init(struct mxt_data *data)
2605 {
2606 }
2607 #endif
2608
2609 static int mxt_configure_objects(struct mxt_data *data,
2610                                  const struct firmware *cfg)
2611 {
2612         struct device *dev = &data->client->dev;
2613         int error;
2614
2615         error = mxt_init_t7_power_cfg(data);
2616         if (error) {
2617                 dev_err(dev, "Failed to initialize power cfg\n");
2618                 return error;
2619         }
2620
2621         if (cfg) {
2622                 error = mxt_update_cfg(data, cfg);
2623                 if (error)
2624                         dev_warn(dev, "Error %d updating config\n", error);
2625         }
2626
2627         if (data->multitouch) {
2628                 error = mxt_initialize_input_device(data);
2629                 if (error)
2630                         return error;
2631         } else {
2632                 dev_warn(dev, "No touch object detected\n");
2633         }
2634
2635         mxt_debug_init(data);
2636
2637         return 0;
2638 }
2639
2640 /* Firmware Version is returned as Major.Minor.Build */
2641 static ssize_t mxt_fw_version_show(struct device *dev,
2642                                    struct device_attribute *attr, char *buf)
2643 {
2644         struct mxt_data *data = dev_get_drvdata(dev);
2645         struct mxt_info *info = data->info;
2646         return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
2647                          info->version >> 4, info->version & 0xf, info->build);
2648 }
2649
2650 /* Hardware Version is returned as FamilyID.VariantID */
2651 static ssize_t mxt_hw_version_show(struct device *dev,
2652                                    struct device_attribute *attr, char *buf)
2653 {
2654         struct mxt_data *data = dev_get_drvdata(dev);
2655         struct mxt_info *info = data->info;
2656         return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
2657                          info->family_id, info->variant_id);
2658 }
2659
2660 static ssize_t mxt_show_instance(char *buf, int count,
2661                                  struct mxt_object *object, int instance,
2662                                  const u8 *val)
2663 {
2664         int i;
2665
2666         if (mxt_obj_instances(object) > 1)
2667                 count += scnprintf(buf + count, PAGE_SIZE - count,
2668                                    "Instance %u\n", instance);
2669
2670         for (i = 0; i < mxt_obj_size(object); i++)
2671                 count += scnprintf(buf + count, PAGE_SIZE - count,
2672                                 "\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
2673         count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
2674
2675         return count;
2676 }
2677
2678 static ssize_t mxt_object_show(struct device *dev,
2679                                     struct device_attribute *attr, char *buf)
2680 {
2681         struct mxt_data *data = dev_get_drvdata(dev);
2682         struct mxt_object *object;
2683         int count = 0;
2684         int i, j;
2685         int error;
2686         u8 *obuf;
2687
2688         /* Pre-allocate buffer large enough to hold max sized object. */
2689         obuf = kmalloc(256, GFP_KERNEL);
2690         if (!obuf)
2691                 return -ENOMEM;
2692
2693         error = 0;
2694         for (i = 0; i < data->info->object_num; i++) {
2695                 object = data->object_table + i;
2696
2697                 if (!mxt_object_readable(object->type))
2698                         continue;
2699
2700                 count += scnprintf(buf + count, PAGE_SIZE - count,
2701                                 "T%u:\n", object->type);
2702
2703                 for (j = 0; j < mxt_obj_instances(object); j++) {
2704                         u16 size = mxt_obj_size(object);
2705                         u16 addr = object->start_address + j * size;
2706
2707                         error = __mxt_read_reg(data->client, addr, size, obuf);
2708                         if (error)
2709                                 goto done;
2710
2711                         count = mxt_show_instance(buf, count, object, j, obuf);
2712                 }
2713         }
2714
2715 done:
2716         kfree(obuf);
2717         return error ?: count;
2718 }
2719
2720 static int mxt_check_firmware_format(struct device *dev,
2721                                      const struct firmware *fw)
2722 {
2723         unsigned int pos = 0;
2724         char c;
2725
2726         while (pos < fw->size) {
2727                 c = *(fw->data + pos);
2728
2729                 if (c < '0' || (c > '9' && c < 'A') || c > 'F')
2730                         return 0;
2731
2732                 pos++;
2733         }
2734
2735         /*
2736          * To convert file try:
2737         /*(DEBLOBBED)*/
2738         dev_err(dev, "Aborting: firmware file must be in binary format\n");
2739
2740         return -EINVAL;
2741 }
2742
2743 static int mxt_load_fw(struct device *dev, const char *fn)
2744 {
2745         struct mxt_data *data = dev_get_drvdata(dev);
2746         const struct firmware *fw = NULL;
2747         unsigned int frame_size;
2748         unsigned int pos = 0;
2749         unsigned int retry = 0;
2750         unsigned int frame = 0;
2751         int ret;
2752
2753         ret = reject_firmware(&fw, fn, dev);
2754         if (ret) {
2755                 dev_err(dev, "Unable to open firmware %s\n", fn);
2756                 return ret;
2757         }
2758
2759         /* Check for incorrect enc file */
2760         ret = mxt_check_firmware_format(dev, fw);
2761         if (ret)
2762                 goto release_firmware;
2763
2764         if (!data->in_bootloader) {
2765                 /* Change to the bootloader mode */
2766                 data->in_bootloader = true;
2767
2768                 ret = mxt_t6_command(data, MXT_COMMAND_RESET,
2769                                      MXT_BOOT_VALUE, false);
2770                 if (ret)
2771                         goto release_firmware;
2772
2773                 msleep(MXT_RESET_TIME);
2774
2775                 /* Do not need to scan since we know family ID */
2776                 ret = mxt_lookup_bootloader_address(data, 0);
2777                 if (ret)
2778                         goto release_firmware;
2779
2780                 mxt_free_input_device(data);
2781                 mxt_free_object_table(data);
2782         } else {
2783                 enable_irq(data->irq);
2784         }
2785
2786         reinit_completion(&data->bl_completion);
2787
2788         ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
2789         if (ret) {
2790                 /* Bootloader may still be unlocked from previous attempt */
2791                 ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false);
2792                 if (ret)
2793                         goto disable_irq;
2794         } else {
2795                 dev_info(dev, "Unlocking bootloader\n");
2796
2797                 /* Unlock bootloader */
2798                 ret = mxt_send_bootloader_cmd(data, true);
2799                 if (ret)
2800                         goto disable_irq;
2801         }
2802
2803         while (pos < fw->size) {
2804                 ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
2805                 if (ret)
2806                         goto disable_irq;
2807
2808                 frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
2809
2810                 /* Take account of CRC bytes */
2811                 frame_size += 2;
2812
2813                 /* Write one frame to device */
2814                 ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
2815                 if (ret)
2816                         goto disable_irq;
2817
2818                 ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
2819                 if (ret) {
2820                         retry++;
2821
2822                         /* Back off by 20ms per retry */
2823                         msleep(retry * 20);
2824
2825                         if (retry > 20) {
2826                                 dev_err(dev, "Retry count exceeded\n");
2827                                 goto disable_irq;
2828                         }
2829                 } else {
2830                         retry = 0;
2831                         pos += frame_size;
2832                         frame++;
2833                 }
2834
2835                 if (frame % 50 == 0)
2836                         dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n",
2837                                 frame, pos, fw->size);
2838         }
2839
2840         /* Wait for flash. */
2841         ret = mxt_wait_for_completion(data, &data->bl_completion,
2842                                       MXT_FW_RESET_TIME);
2843         if (ret)
2844                 goto disable_irq;
2845
2846         dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos);
2847
2848         /*
2849          * Wait for device to reset. Some bootloader versions do not assert
2850          * the CHG line after bootloading has finished, so ignore potential
2851          * errors.
2852          */
2853         mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
2854
2855         data->in_bootloader = false;
2856
2857 disable_irq:
2858         disable_irq(data->irq);
2859 release_firmware:
2860         release_firmware(fw);
2861         return ret;
2862 }
2863
2864 static ssize_t mxt_update_fw_store(struct device *dev,
2865                                         struct device_attribute *attr,
2866                                         const char *buf, size_t count)
2867 {
2868         struct mxt_data *data = dev_get_drvdata(dev);
2869         int error;
2870
2871         error = mxt_load_fw(dev, MXT_FW_NAME);
2872         if (error) {
2873                 dev_err(dev, "The firmware update failed(%d)\n", error);
2874                 count = error;
2875         } else {
2876                 dev_info(dev, "The firmware update succeeded\n");
2877
2878                 error = mxt_initialize(data);
2879                 if (error)
2880                         return error;
2881         }
2882
2883         return count;
2884 }
2885
2886 static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
2887 static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
2888 static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
2889 static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
2890
2891 static struct attribute *mxt_attrs[] = {
2892         &dev_attr_fw_version.attr,
2893         &dev_attr_hw_version.attr,
2894         &dev_attr_object.attr,
2895         &dev_attr_update_fw.attr,
2896         NULL
2897 };
2898
2899 static const struct attribute_group mxt_attr_group = {
2900         .attrs = mxt_attrs,
2901 };
2902
2903 static void mxt_start(struct mxt_data *data)
2904 {
2905         switch (data->pdata->suspend_mode) {
2906         case MXT_SUSPEND_T9_CTRL:
2907                 mxt_soft_reset(data);
2908
2909                 /* Touch enable */
2910                 /* 0x83 = SCANEN | RPTEN | ENABLE */
2911                 mxt_write_object(data,
2912                                 MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
2913                 break;
2914
2915         case MXT_SUSPEND_DEEP_SLEEP:
2916         default:
2917                 mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
2918
2919                 /* Recalibrate since chip has been in deep sleep */
2920                 mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
2921                 break;
2922         }
2923
2924 }
2925
2926 static void mxt_stop(struct mxt_data *data)
2927 {
2928         switch (data->pdata->suspend_mode) {
2929         case MXT_SUSPEND_T9_CTRL:
2930                 /* Touch disable */
2931                 mxt_write_object(data,
2932                                 MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
2933                 break;
2934
2935         case MXT_SUSPEND_DEEP_SLEEP:
2936         default:
2937                 mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
2938                 break;
2939         }
2940 }
2941
2942 static int mxt_input_open(struct input_dev *dev)
2943 {
2944         struct mxt_data *data = input_get_drvdata(dev);
2945
2946         mxt_start(data);
2947
2948         return 0;
2949 }
2950
2951 static void mxt_input_close(struct input_dev *dev)
2952 {
2953         struct mxt_data *data = input_get_drvdata(dev);
2954
2955         mxt_stop(data);
2956 }
2957
2958 #ifdef CONFIG_OF
2959 static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
2960 {
2961         struct mxt_platform_data *pdata;
2962         struct device_node *np = client->dev.of_node;
2963         u32 *keymap;
2964         int proplen, ret;
2965
2966         if (!np)
2967                 return ERR_PTR(-ENOENT);
2968
2969         pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
2970         if (!pdata)
2971                 return ERR_PTR(-ENOMEM);
2972
2973         if (of_find_property(np, "linux,gpio-keymap", &proplen)) {
2974                 pdata->t19_num_keys = proplen / sizeof(u32);
2975
2976                 keymap = devm_kzalloc(&client->dev,
2977                                 pdata->t19_num_keys * sizeof(keymap[0]),
2978                                 GFP_KERNEL);
2979                 if (!keymap)
2980                         return ERR_PTR(-ENOMEM);
2981
2982                 ret = of_property_read_u32_array(np, "linux,gpio-keymap",
2983                                                  keymap, pdata->t19_num_keys);
2984                 if (ret)
2985                         dev_warn(&client->dev,
2986                                  "Couldn't read linux,gpio-keymap: %d\n", ret);
2987
2988                 pdata->t19_keymap = keymap;
2989         }
2990
2991         pdata->suspend_mode = MXT_SUSPEND_DEEP_SLEEP;
2992
2993         return pdata;
2994 }
2995 #else
2996 static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
2997 {
2998         return ERR_PTR(-ENOENT);
2999 }
3000 #endif
3001
3002 #ifdef CONFIG_ACPI
3003
3004 struct mxt_acpi_platform_data {
3005         const char *hid;
3006         struct mxt_platform_data pdata;
3007 };
3008
3009 static unsigned int samus_touchpad_buttons[] = {
3010         KEY_RESERVED,
3011         KEY_RESERVED,
3012         KEY_RESERVED,
3013         BTN_LEFT
3014 };
3015
3016 static struct mxt_acpi_platform_data samus_platform_data[] = {
3017         {
3018                 /* Touchpad */
3019                 .hid    = "ATML0000",
3020                 .pdata  = {
3021                         .t19_num_keys   = ARRAY_SIZE(samus_touchpad_buttons),
3022                         .t19_keymap     = samus_touchpad_buttons,
3023                 },
3024         },
3025         {
3026                 /* Touchscreen */
3027                 .hid    = "ATML0001",
3028         },
3029         { }
3030 };
3031
3032 static unsigned int chromebook_tp_buttons[] = {
3033         KEY_RESERVED,
3034         KEY_RESERVED,
3035         KEY_RESERVED,
3036         KEY_RESERVED,
3037         KEY_RESERVED,
3038         BTN_LEFT
3039 };
3040
3041 static struct mxt_acpi_platform_data chromebook_platform_data[] = {
3042         {
3043                 /* Touchpad */
3044                 .hid    = "ATML0000",
3045                 .pdata  = {
3046                         .t19_num_keys   = ARRAY_SIZE(chromebook_tp_buttons),
3047                         .t19_keymap     = chromebook_tp_buttons,
3048                 },
3049         },
3050         {
3051                 /* Touchscreen */
3052                 .hid    = "ATML0001",
3053         },
3054         { }
3055 };
3056
3057 static const struct dmi_system_id mxt_dmi_table[] = {
3058         {
3059                 /* 2015 Google Pixel */
3060                 .ident = "Chromebook Pixel 2",
3061                 .matches = {
3062                         DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
3063                         DMI_MATCH(DMI_PRODUCT_NAME, "Samus"),
3064                 },
3065                 .driver_data = samus_platform_data,
3066         },
3067         {
3068                 /* Samsung Chromebook Pro */
3069                 .ident = "Samsung Chromebook Pro",
3070                 .matches = {
3071                         DMI_MATCH(DMI_SYS_VENDOR, "Google"),
3072                         DMI_MATCH(DMI_PRODUCT_NAME, "Caroline"),
3073                 },
3074                 .driver_data = samus_platform_data,
3075         },
3076         {
3077                 /* Other Google Chromebooks */
3078                 .ident = "Chromebook",
3079                 .matches = {
3080                         DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
3081                 },
3082                 .driver_data = chromebook_platform_data,
3083         },
3084         { }
3085 };
3086
3087 static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
3088 {
3089         struct acpi_device *adev;
3090         const struct dmi_system_id *system_id;
3091         const struct mxt_acpi_platform_data *acpi_pdata;
3092
3093         /*
3094          * Ignore ACPI devices representing bootloader mode.
3095          *
3096          * This is a bit of a hack: Google Chromebook BIOS creates ACPI
3097          * devices for both application and bootloader modes, but we are
3098          * interested in application mode only (if device is in bootloader
3099          * mode we'll end up switching into application anyway). So far
3100          * application mode addresses were all above 0x40, so we'll use it
3101          * as a threshold.
3102          */
3103         if (client->addr < 0x40)
3104                 return ERR_PTR(-ENXIO);
3105
3106         adev = ACPI_COMPANION(&client->dev);
3107         if (!adev)
3108                 return ERR_PTR(-ENOENT);
3109
3110         system_id = dmi_first_match(mxt_dmi_table);
3111         if (!system_id)
3112                 return ERR_PTR(-ENOENT);
3113
3114         acpi_pdata = system_id->driver_data;
3115         if (!acpi_pdata)
3116                 return ERR_PTR(-ENOENT);
3117
3118         while (acpi_pdata->hid) {
3119                 if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid))
3120                         return &acpi_pdata->pdata;
3121
3122                 acpi_pdata++;
3123         }
3124
3125         return ERR_PTR(-ENOENT);
3126 }
3127 #else
3128 static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
3129 {
3130         return ERR_PTR(-ENOENT);
3131 }
3132 #endif
3133
3134 static const struct mxt_platform_data *
3135 mxt_get_platform_data(struct i2c_client *client)
3136 {
3137         const struct mxt_platform_data *pdata;
3138
3139         pdata = dev_get_platdata(&client->dev);
3140         if (pdata)
3141                 return pdata;
3142
3143         pdata = mxt_parse_dt(client);
3144         if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
3145                 return pdata;
3146
3147         pdata = mxt_parse_acpi(client);
3148         if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
3149                 return pdata;
3150
3151         dev_err(&client->dev, "No platform data specified\n");
3152         return ERR_PTR(-EINVAL);
3153 }
3154
3155 static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
3156 {
3157         struct mxt_data *data;
3158         const struct mxt_platform_data *pdata;
3159         int error;
3160
3161         pdata = mxt_get_platform_data(client);
3162         if (IS_ERR(pdata))
3163                 return PTR_ERR(pdata);
3164
3165         data = devm_kzalloc(&client->dev, sizeof(struct mxt_data), GFP_KERNEL);
3166         if (!data)
3167                 return -ENOMEM;
3168
3169         snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
3170                  client->adapter->nr, client->addr);
3171
3172         data->client = client;
3173         data->pdata = pdata;
3174         data->irq = client->irq;
3175         i2c_set_clientdata(client, data);
3176
3177         init_completion(&data->bl_completion);
3178         init_completion(&data->reset_completion);
3179         init_completion(&data->crc_completion);
3180
3181         data->reset_gpio = devm_gpiod_get_optional(&client->dev,
3182                                                    "reset", GPIOD_OUT_LOW);
3183         if (IS_ERR(data->reset_gpio)) {
3184                 error = PTR_ERR(data->reset_gpio);
3185                 dev_err(&client->dev, "Failed to get reset gpio: %d\n", error);
3186                 return error;
3187         }
3188
3189         error = devm_request_threaded_irq(&client->dev, client->irq,
3190                                           NULL, mxt_interrupt,
3191                                           pdata->irqflags | IRQF_ONESHOT,
3192                                           client->name, data);
3193         if (error) {
3194                 dev_err(&client->dev, "Failed to register interrupt\n");
3195                 return error;
3196         }
3197
3198         if (data->reset_gpio) {
3199                 data->in_bootloader = true;
3200                 msleep(MXT_RESET_TIME);
3201                 reinit_completion(&data->bl_completion);
3202                 gpiod_set_value(data->reset_gpio, 1);
3203                 error = mxt_wait_for_completion(data, &data->bl_completion,
3204                                                 MXT_RESET_TIMEOUT);
3205                 if (error)
3206                         return error;
3207                 data->in_bootloader = false;
3208         }
3209
3210         disable_irq(client->irq);
3211
3212         error = mxt_initialize(data);
3213         if (error)
3214                 return error;
3215
3216         error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
3217         if (error) {
3218                 dev_err(&client->dev, "Failure %d creating sysfs group\n",
3219                         error);
3220                 goto err_free_object;
3221         }
3222
3223         return 0;
3224
3225 err_free_object:
3226         mxt_free_input_device(data);
3227         mxt_free_object_table(data);
3228         return error;
3229 }
3230
3231 static int mxt_remove(struct i2c_client *client)
3232 {
3233         struct mxt_data *data = i2c_get_clientdata(client);
3234
3235         disable_irq(data->irq);
3236         sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
3237         mxt_free_input_device(data);
3238         mxt_free_object_table(data);
3239
3240         return 0;
3241 }
3242
3243 static int __maybe_unused mxt_suspend(struct device *dev)
3244 {
3245         struct i2c_client *client = to_i2c_client(dev);
3246         struct mxt_data *data = i2c_get_clientdata(client);
3247         struct input_dev *input_dev = data->input_dev;
3248
3249         if (!input_dev)
3250                 return 0;
3251
3252         mutex_lock(&input_dev->mutex);
3253
3254         if (input_dev->users)
3255                 mxt_stop(data);
3256
3257         mutex_unlock(&input_dev->mutex);
3258
3259         disable_irq(data->irq);
3260
3261         return 0;
3262 }
3263
3264 static int __maybe_unused mxt_resume(struct device *dev)
3265 {
3266         struct i2c_client *client = to_i2c_client(dev);
3267         struct mxt_data *data = i2c_get_clientdata(client);
3268         struct input_dev *input_dev = data->input_dev;
3269
3270         if (!input_dev)
3271                 return 0;
3272
3273         enable_irq(data->irq);
3274
3275         mutex_lock(&input_dev->mutex);
3276
3277         if (input_dev->users)
3278                 mxt_start(data);
3279
3280         mutex_unlock(&input_dev->mutex);
3281
3282         return 0;
3283 }
3284
3285 static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
3286
3287 static const struct of_device_id mxt_of_match[] = {
3288         { .compatible = "atmel,maxtouch", },
3289         {},
3290 };
3291 MODULE_DEVICE_TABLE(of, mxt_of_match);
3292
3293 #ifdef CONFIG_ACPI
3294 static const struct acpi_device_id mxt_acpi_id[] = {
3295         { "ATML0000", 0 },      /* Touchpad */
3296         { "ATML0001", 0 },      /* Touchscreen */
3297         { }
3298 };
3299 MODULE_DEVICE_TABLE(acpi, mxt_acpi_id);
3300 #endif
3301
3302 static const struct i2c_device_id mxt_id[] = {
3303         { "qt602240_ts", 0 },
3304         { "atmel_mxt_ts", 0 },
3305         { "atmel_mxt_tp", 0 },
3306         { "maxtouch", 0 },
3307         { "mXT224", 0 },
3308         { }
3309 };
3310 MODULE_DEVICE_TABLE(i2c, mxt_id);
3311
3312 static struct i2c_driver mxt_driver = {
3313         .driver = {
3314                 .name   = "atmel_mxt_ts",
3315                 .of_match_table = of_match_ptr(mxt_of_match),
3316                 .acpi_match_table = ACPI_PTR(mxt_acpi_id),
3317                 .pm     = &mxt_pm_ops,
3318         },
3319         .probe          = mxt_probe,
3320         .remove         = mxt_remove,
3321         .id_table       = mxt_id,
3322 };
3323
3324 module_i2c_driver(mxt_driver);
3325
3326 /* Module information */
3327 MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
3328 MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver");
3329 MODULE_LICENSE("GPL");