1 # SPDX-License-Identifier: GPL-2.0-only
3 # Touchscreen driver configuration
5 menuconfig INPUT_TOUCHSCREEN
8 Say Y here, and a list of supported touchscreens will be displayed.
9 This option doesn't affect the kernel.
15 config TOUCHSCREEN_88PM860X
16 tristate "Marvell 88PM860x touchscreen"
17 depends on MFD_88PM860X
19 Say Y here if you have a 88PM860x PMIC and want to enable
20 support for the built-in touchscreen.
24 To compile this driver as a module, choose M here: the
25 module will be called 88pm860x-ts.
27 config TOUCHSCREEN_ADS7846
28 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
30 depends on HWMON = n || HWMON
32 Say Y here if you have a touchscreen interface using the
33 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
34 and your board-specific setup code includes that in its
37 If HWMON is selected, and the driver is told the reference voltage
38 on your board, you will also get hwmon interfaces for the voltage
39 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
41 If unsure, say N (but it's safe to say "Y").
43 To compile this driver as a module, choose M here: the
44 module will be called ads7846.
46 config TOUCHSCREEN_AD7877
47 tristate "AD7877 based touchscreens"
50 Say Y here if you have a touchscreen interface using the
51 AD7877 controller, and your board-specific initialization
52 code includes that in its table of SPI devices.
54 If unsure, say N (but it's safe to say "Y").
56 To compile this driver as a module, choose M here: the
57 module will be called ad7877.
59 config TOUCHSCREEN_AD7879
60 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
62 Say Y here if you want to support a touchscreen interface using
63 the AD7879-1/AD7889-1 controller.
65 You should select a bus connection too.
67 To compile this driver as a module, choose M here: the
68 module will be called ad7879.
70 config TOUCHSCREEN_AD7879_I2C
71 tristate "support I2C bus connection"
72 depends on TOUCHSCREEN_AD7879 && I2C
75 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
77 To compile this driver as a module, choose M here: the
78 module will be called ad7879-i2c.
80 config TOUCHSCREEN_AD7879_SPI
81 tristate "support SPI bus connection"
82 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
85 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
87 If unsure, say N (but it's safe to say "Y").
89 To compile this driver as a module, choose M here: the
90 module will be called ad7879-spi.
92 config TOUCHSCREEN_ADC
93 tristate "Generic ADC based resistive touchscreen"
98 Say Y here if you want to use the generic ADC
99 resistive touchscreen driver.
101 If unsure, say N (but it's safe to say "Y").
103 To compile this driver as a module, choose M here: the
104 module will be called resistive-adc-touch.ko.
106 config TOUCHSCREEN_AR1021_I2C
107 tristate "Microchip AR1020/1021 i2c touchscreen"
110 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
111 controller chip in your system.
115 To compile this driver as a module, choose M here: the
116 module will be called ar1021_i2c.
118 config TOUCHSCREEN_ATMEL_MXT
119 tristate "Atmel mXT I2C Touchscreen"
123 Say Y here if you have Atmel mXT series I2C touchscreen,
124 such as AT42QT602240/ATMXT224, connected to your system.
128 To compile this driver as a module, choose M here: the
129 module will be called atmel_mxt_ts.
131 config TOUCHSCREEN_ATMEL_MXT_T37
132 bool "Support T37 Diagnostic Data"
133 depends on TOUCHSCREEN_ATMEL_MXT
134 depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
135 select VIDEOBUF2_VMALLOC
137 Say Y here if you want support to output data from the T37
138 Diagnostic Data object using a V4L device.
140 config TOUCHSCREEN_AUO_PIXCIR
141 tristate "AUO in-cell touchscreen using Pixcir ICs"
143 depends on GPIOLIB || COMPILE_TEST
145 Say Y here if you have a AUO display with in-cell touchscreen
150 To compile this driver as a module, choose M here: the
151 module will be called auo-pixcir-ts.
153 config TOUCHSCREEN_BU21013
154 tristate "BU21013 based touch panel controllers"
157 Say Y here if you have a bu21013 touchscreen connected to
162 To compile this driver as a module, choose M here: the
163 module will be called bu21013_ts.
165 config TOUCHSCREEN_BU21029
166 tristate "Rohm BU21029 based touch panel controllers"
169 Say Y here if you have a Rohm BU21029 touchscreen controller
170 connected to your system.
174 To compile this driver as a module, choose M here: the
175 module will be called bu21029_ts.
177 config TOUCHSCREEN_CHIPONE_ICN8318
178 tristate "chipone icn8318 touchscreen controller"
179 depends on GPIOLIB || COMPILE_TEST
183 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
187 To compile this driver as a module, choose M here: the
188 module will be called chipone_icn8318.
190 config TOUCHSCREEN_CHIPONE_ICN8505
191 tristate "chipone icn8505 touchscreen controller"
192 depends on I2C && ACPI
194 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
198 To compile this driver as a module, choose M here: the
199 module will be called chipone_icn8505.
201 config TOUCHSCREEN_CY8CTMA140
202 tristate "cy8ctma140 touchscreen"
205 Say Y here if you have a Cypress CY8CTMA140 capacitive
206 touchscreen also just known as "TMA140"
210 To compile this driver as a module, choose M here: the
211 module will be called cy8ctma140.
213 config TOUCHSCREEN_CY8CTMG110
214 tristate "cy8ctmg110 touchscreen"
216 depends on GPIOLIB || COMPILE_TEST
218 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
223 To compile this driver as a module, choose M here: the
224 module will be called cy8ctmg110_ts.
226 config TOUCHSCREEN_CYTTSP_CORE
227 tristate "Cypress TTSP touchscreen"
229 Say Y here if you have a touchscreen using controller from
230 the Cypress TrueTouch(tm) Standard Product family connected
231 to your system. You will also need to select appropriate
232 bus connection below.
236 To compile this driver as a module, choose M here: the
237 module will be called cyttsp_core.
239 config TOUCHSCREEN_CYTTSP_I2C
240 tristate "support I2C bus connection"
241 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
243 Say Y here if the touchscreen is connected via I2C bus.
245 To compile this driver as a module, choose M here: the
246 module will be called cyttsp_i2c.
248 config TOUCHSCREEN_CYTTSP_SPI
249 tristate "support SPI bus connection"
250 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
252 Say Y here if the touchscreen is connected via SPI bus.
254 To compile this driver as a module, choose M here: the
255 module will be called cyttsp_spi.
257 config TOUCHSCREEN_CYTTSP4_CORE
258 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
260 Core driver for Cypress TrueTouch(tm) Standard Product
261 Generation4 touchscreen controllers.
263 Say Y here if you have a Cypress Gen4 touchscreen.
267 To compile this driver as a module, choose M here.
269 config TOUCHSCREEN_CYTTSP4_I2C
270 tristate "support I2C bus connection"
271 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
273 Say Y here if the touchscreen is connected via I2C bus.
275 To compile this driver as a module, choose M here: the
276 module will be called cyttsp4_i2c.
278 config TOUCHSCREEN_CYTTSP4_SPI
279 tristate "support SPI bus connection"
280 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
282 Say Y here if the touchscreen is connected via SPI bus.
284 To compile this driver as a module, choose M here: the
285 module will be called cyttsp4_spi.
287 config TOUCHSCREEN_CYTTSP5
288 tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
293 Driver for Parade TrueTouch Standard Product Generation 5
294 touchscreen controllers. I2C bus interface support only.
296 Say Y here if you have a Cypress Gen5 touchscreen.
300 To compile this driver as a module, choose M here: the
301 module will be called cyttsp5.
303 config TOUCHSCREEN_DA9034
304 tristate "Touchscreen support for Dialog Semiconductor DA9034"
305 depends on PMIC_DA903X
308 Say Y here to enable the support for the touchscreen found
309 on Dialog Semiconductor DA9034 PMIC.
313 To compile this driver as a module, choose M here: the
314 module will be called da9034-ts.
316 config TOUCHSCREEN_DA9052
317 tristate "Dialog DA9052/DA9053 TSI"
318 depends on PMIC_DA9052
320 Say Y here to support the touchscreen found on Dialog Semiconductor
321 DA9052-BC and DA9053-AA/Bx PMICs.
325 To compile this driver as a module, choose M here: the
326 module will be called da9052_tsi.
328 config TOUCHSCREEN_DYNAPRO
329 tristate "Dynapro serial touchscreen"
332 Say Y here if you have a Dynapro serial touchscreen connected to
337 To compile this driver as a module, choose M here: the
338 module will be called dynapro.
340 config TOUCHSCREEN_HAMPSHIRE
341 tristate "Hampshire serial touchscreen"
344 Say Y here if you have a Hampshire serial touchscreen connected to
349 To compile this driver as a module, choose M here: the
350 module will be called hampshire.
352 config TOUCHSCREEN_EETI
353 tristate "EETI touchscreen panel support"
356 Say Y here to enable support for I2C connected EETI touch panels.
358 To compile this driver as a module, choose M here: the
359 module will be called eeti_ts.
361 config TOUCHSCREEN_EGALAX
362 tristate "EETI eGalax multi-touch panel support"
365 Say Y here to enable support for I2C connected EETI
366 eGalax multi-touch panels.
368 To compile this driver as a module, choose M here: the
369 module will be called egalax_ts.
371 config TOUCHSCREEN_EGALAX_SERIAL
372 tristate "EETI eGalax serial touchscreen"
375 Say Y here to enable support for serial connected EETI
378 To compile this driver as a module, choose M here: the
379 module will be called egalax_ts_serial.
381 config TOUCHSCREEN_EXC3000
382 tristate "EETI EXC3000 multi-touch panel support"
385 Say Y here to enable support for I2C connected EETI
386 EXC3000 multi-touch panels.
388 To compile this driver as a module, choose M here: the
389 module will be called exc3000.
391 config TOUCHSCREEN_FUJITSU
392 tristate "Fujitsu serial touchscreen"
395 Say Y here if you have the Fujitsu touchscreen (such as one
396 installed in Lifebook P series laptop) connected to your
401 To compile this driver as a module, choose M here: the
402 module will be called fujitsu-ts.
404 config TOUCHSCREEN_GOODIX
405 tristate "Goodix I2C touchscreen"
407 depends on GPIOLIB || COMPILE_TEST
409 Say Y here if you have the Goodix touchscreen (such as one
410 installed in Onda v975w tablets) connected to your
411 system. It also supports 5-finger chip models, which can be
412 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
416 To compile this driver as a module, choose M here: the
417 module will be called goodix.
419 config TOUCHSCREEN_HIDEEP
420 tristate "HiDeep Touch IC"
423 Say Y here if you have a touchscreen using HiDeep.
427 To compile this driver as a module, choose M here : the
428 module will be called hideep_ts.
430 config TOUCHSCREEN_HYCON_HY46XX
431 tristate "Hycon hy46xx touchscreen support"
434 Say Y here if you have a touchscreen using Hycon hy46xx
438 To compile this driver as a module, choose M here: the
439 module will be called hycon-hy46xx.
441 config TOUCHSCREEN_HYNITRON_CSTXXX
442 tristate "Hynitron touchscreen support"
445 Say Y here if you have a touchscreen using a Hynitron
446 touchscreen controller.
450 To compile this driver as a module, choose M here: the
451 module will be called hynitron-cstxxx.
453 config TOUCHSCREEN_ILI210X
454 tristate "Ilitek ILI210X based touchscreen"
458 Say Y here if you have a ILI210X based touchscreen
459 controller. This driver supports models ILI2102,
460 ILI2102s, ILI2103, ILI2103s and ILI2105.
461 Such kind of chipsets can be found in Amazon Kindle Fire
466 To compile this driver as a module, choose M here: the
467 module will be called ili210x.
469 config TOUCHSCREEN_ILITEK
470 tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
473 Say Y here if you have touchscreen with ILITEK touch IC,
474 it supports 213X/23XX/25XX and other Lego series.
478 To compile this driver as a module, choose M here: the
479 module will be called ilitek_ts_i2c.
481 config TOUCHSCREEN_IPROC
482 tristate "IPROC touch panel driver support"
483 depends on ARCH_BCM_IPROC || COMPILE_TEST
485 Say Y here if you want to add support for the IPROC touch
486 controller to your system.
490 To compile this driver as a module, choose M here: the
491 module will be called bcm_iproc_tsc.
493 config TOUCHSCREEN_S6SY761
494 tristate "Samsung S6SY761 Touchscreen driver"
497 Say Y if you have the Samsung S6SY761 driver
501 To compile this driver as module, choose M here: the
502 module will be called s6sy761.
504 config TOUCHSCREEN_GUNZE
505 tristate "Gunze AHL-51S touchscreen"
508 Say Y here if you have the Gunze AHL-51 touchscreen connected to
513 To compile this driver as a module, choose M here: the
514 module will be called gunze.
516 config TOUCHSCREEN_EKTF2127
517 tristate "Elan eKTF2127 I2C touchscreen"
520 Say Y here if you have an Elan eKTF2127 touchscreen
521 connected to your system.
525 To compile this driver as a module, choose M here: the
526 module will be called ektf2127.
528 config TOUCHSCREEN_ELAN
529 tristate "Elan eKTH I2C touchscreen"
532 Say Y here if you have an Elan eKTH I2C touchscreen
533 connected to your system.
537 To compile this driver as a module, choose M here: the
538 module will be called elants_i2c.
540 config TOUCHSCREEN_ELO
541 tristate "Elo serial touchscreens"
544 Say Y here if you have an Elo serial touchscreen connected to
549 To compile this driver as a module, choose M here: the
550 module will be called elo.
552 config TOUCHSCREEN_WACOM_W8001
553 tristate "Wacom W8001 penabled serial touchscreen"
556 Say Y here if you have an Wacom W8001 penabled serial touchscreen
557 connected to your system.
561 To compile this driver as a module, choose M here: the
562 module will be called wacom_w8001.
564 config TOUCHSCREEN_WACOM_I2C
565 tristate "Wacom Tablet support (I2C)"
568 Say Y here if you want to use the I2C version of the Wacom
573 To compile this driver as a module, choose M here: the module
574 will be called wacom_i2c.
576 config TOUCHSCREEN_LPC32XX
577 tristate "LPC32XX touchscreen controller"
578 depends on ARCH_LPC32XX
580 Say Y here if you have a LPC32XX device and want
581 to support the built-in touchscreen.
583 To compile this driver as a module, choose M here: the
584 module will be called lpc32xx_ts.
586 config TOUCHSCREEN_MAX11801
587 tristate "MAX11801 based touchscreens"
590 Say Y here if you have a MAX11801 based touchscreen
595 To compile this driver as a module, choose M here: the
596 module will be called max11801_ts.
598 config TOUCHSCREEN_MCS5000
599 tristate "MELFAS MCS-5000 touchscreen"
602 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
607 To compile this driver as a module, choose M here: the
608 module will be called mcs5000_ts.
610 config TOUCHSCREEN_MMS114
611 tristate "MELFAS MMS114 touchscreen"
614 Say Y here if you have the MELFAS MMS114 touchscreen controller
619 To compile this driver as a module, choose M here: the
620 module will be called mms114.
622 config TOUCHSCREEN_MELFAS_MIP4
623 tristate "MELFAS MIP4 Touchscreen"
626 Say Y here if you have a MELFAS MIP4 Touchscreen device.
630 To compile this driver as a module, choose M here:
631 the module will be called melfas_mip4.
633 config TOUCHSCREEN_MSG2638
634 tristate "MStar msg2638 touchscreen support"
636 depends on GPIOLIB || COMPILE_TEST
638 Say Y here if you have an I2C touchscreen using MStar msg2638.
642 To compile this driver as a module, choose M here: the
643 module will be called msg2638.
645 config TOUCHSCREEN_MTOUCH
646 tristate "MicroTouch serial touchscreens"
649 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
654 To compile this driver as a module, choose M here: the
655 module will be called mtouch.
657 config TOUCHSCREEN_NOVATEK_NVT_TS
658 tristate "Novatek NT11205 touchscreen support"
661 Say Y here if you have a Novatek NT11205 touchscreen.
664 To compile this driver as a module, choose M here: the
665 module will be called novatek-nvt-ts.
667 config TOUCHSCREEN_IMAGIS
668 tristate "Imagis touchscreen support"
671 Say Y here if you have an Imagis IST30xxC touchscreen.
674 To compile this driver as a module, choose M here: the
675 module will be called imagis.
677 config TOUCHSCREEN_IMX6UL_TSC
678 tristate "Freescale i.MX6UL touchscreen controller"
679 depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
681 Say Y here if you have a Freescale i.MX6UL, and want to
682 use the internal touchscreen controller.
686 To compile this driver as a module, choose M here: the
687 module will be called imx6ul_tsc.
689 config TOUCHSCREEN_INEXIO
690 tristate "iNexio serial touchscreens"
693 Say Y here if you have an iNexio serial touchscreen connected to
698 To compile this driver as a module, choose M here: the
699 module will be called inexio.
701 config TOUCHSCREEN_MK712
702 tristate "ICS MicroClock MK712 touchscreen"
705 Say Y here if you have the ICS MicroClock MK712 touchscreen
706 controller chip in your system.
710 To compile this driver as a module, choose M here: the
711 module will be called mk712.
713 config TOUCHSCREEN_HP600
714 tristate "HP Jornada 6xx touchscreen"
715 depends on SH_HP6XX && SH_ADC
717 Say Y here if you have a HP Jornada 620/660/680/690 and want to
718 support the built-in touchscreen.
720 To compile this driver as a module, choose M here: the
721 module will be called hp680_ts_input.
723 config TOUCHSCREEN_HP7XX
724 tristate "HP Jornada 7xx touchscreen"
725 depends on SA1100_JORNADA720_SSP
727 Say Y here if you have a HP Jornada 710/720/728 and want
728 to support the built-in touchscreen.
730 To compile this driver as a module, choose M here: the
731 module will be called jornada720_ts.
733 config TOUCHSCREEN_IPAQ_MICRO
734 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
735 depends on MFD_IPAQ_MICRO
737 Say Y here to enable support for the touchscreen attached to
738 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
742 To compile this driver as a module, choose M here: the
743 module will be called ipaq-micro-ts.
745 config TOUCHSCREEN_HTCPEN
746 tristate "HTC Shift X9500 touchscreen"
749 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
750 Clio / Shangrila and want to support the built-in touchscreen.
754 To compile this driver as a module, choose M here: the
755 module will be called htcpen.
757 config TOUCHSCREEN_PENMOUNT
758 tristate "Penmount serial touchscreen"
761 Say Y here if you have a Penmount serial touchscreen connected to
766 To compile this driver as a module, choose M here: the
767 module will be called penmount.
769 config TOUCHSCREEN_EDT_FT5X06
770 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
774 Say Y here if you have an EDT "Polytouch" touchscreen based
775 on the FocalTech FT5x06 family of controllers connected to
780 To compile this driver as a module, choose M here: the
781 module will be called edt-ft5x06.
783 config TOUCHSCREEN_RASPBERRYPI_FW
784 tristate "Raspberry Pi's firmware base touch screen support"
785 depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
787 Say Y here if you have the official Raspberry Pi 7 inch screen on
792 To compile this driver as a module, choose M here: the
793 module will be called raspberrypi-ts.
795 config TOUCHSCREEN_MIGOR
796 tristate "Renesas MIGO-R touchscreen"
797 depends on (SH_MIGOR || COMPILE_TEST) && I2C
799 Say Y here to enable MIGO-R touchscreen support.
803 To compile this driver as a module, choose M here: the
804 module will be called migor_ts.
806 config TOUCHSCREEN_TOUCHRIGHT
807 tristate "Touchright serial touchscreen"
810 Say Y here if you have a Touchright serial touchscreen connected to
815 To compile this driver as a module, choose M here: the
816 module will be called touchright.
818 config TOUCHSCREEN_TOUCHWIN
819 tristate "Touchwin serial touchscreen"
822 Say Y here if you have a Touchwin serial touchscreen connected to
827 To compile this driver as a module, choose M here: the
828 module will be called touchwin.
830 config TOUCHSCREEN_TI_AM335X_TSC
831 tristate "TI Touchscreen Interface"
832 depends on MFD_TI_AM335X_TSCADC
834 Say Y here if you have 4/5/8 wire touchscreen controller
835 to be connected to the ADC controller on your TI AM335x SoC.
839 To compile this driver as a module, choose M here: the
840 module will be called ti_am335x_tsc.
842 config TOUCHSCREEN_PIXCIR
843 tristate "PIXCIR I2C touchscreens"
846 Say Y here if you have a pixcir i2c touchscreen
851 To compile this driver as a module, choose M here: the
852 module will be called pixcir_i2c_ts.
854 config TOUCHSCREEN_WDT87XX_I2C
855 tristate "Weida HiTech I2C touchscreen"
858 Say Y here if you have a Weida WDT87XX I2C touchscreen
859 connected to your system.
863 To compile this driver as a module, choose M here: the
864 module will be called wdt87xx_i2c.
866 config TOUCHSCREEN_WM831X
867 tristate "Support for WM831x touchscreen controllers"
868 depends on MFD_WM831X
870 This enables support for the touchscreen controller on the WM831x
873 To compile this driver as a module, choose M here: the
874 module will be called wm831x-ts.
876 config TOUCHSCREEN_WM97XX
877 tristate "Support for WM97xx AC97 touchscreen controllers"
878 depends on AC97_BUS || AC97_BUS_NEW
880 Say Y here if you have a Wolfson Microelectronics WM97xx
881 touchscreen connected to your system. Note that this option
882 only enables core driver, you will also need to select
883 support for appropriate chip below.
887 To compile this driver as a module, choose M here: the
888 module will be called wm97xx-ts.
890 config TOUCHSCREEN_WM9705
891 bool "WM9705 Touchscreen interface support"
892 depends on TOUCHSCREEN_WM97XX
895 Say Y here to enable support for the Wolfson Microelectronics
896 WM9705 touchscreen controller.
898 config TOUCHSCREEN_WM9712
899 bool "WM9712 Touchscreen interface support"
900 depends on TOUCHSCREEN_WM97XX
903 Say Y here to enable support for the Wolfson Microelectronics
904 WM9712 touchscreen controller.
906 config TOUCHSCREEN_WM9713
907 bool "WM9713 Touchscreen interface support"
908 depends on TOUCHSCREEN_WM97XX
911 Say Y here to enable support for the Wolfson Microelectronics
912 WM9713 touchscreen controller.
914 config TOUCHSCREEN_WM97XX_MAINSTONE
915 tristate "WM97xx Mainstone/Palm accelerated touch"
916 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
917 depends on SND_PXA2XX_LIB_AC97
919 Say Y here for support for streaming mode with WM97xx touchscreens
920 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
924 To compile this driver as a module, choose M here: the
925 module will be called mainstone-wm97xx.
927 config TOUCHSCREEN_USB_COMPOSITE
928 tristate "USB Touchscreen Driver"
929 depends on USB_ARCH_HAS_HCD
932 USB Touchscreen driver for:
933 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
934 - PanJit TouchSet USB
935 - 3M MicroTouch USB (EX II series)
937 - some other eTurboTouch
940 - IRTOUCHSYSTEMS/UNITOP
942 - GoTop Super_Q2/GogoPen/PenPower tablets
943 - JASTEC USB Touch Controller/DigiTech DTR-02U
944 - Zytronic controllers
945 - Elo TouchSystems 2700 IntelliTouch
946 - EasyTouch USB Touch Controller from Data Module
947 - e2i (Mimo monitors)
949 Have a look at <http://linux.chapter7.ch/touchkit/> for
950 a usage description and the required user-space stuff.
952 To compile this driver as a module, choose M here: the
953 module will be called usbtouchscreen.
955 config TOUCHSCREEN_MXS_LRADC
956 tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
957 depends on MFD_MXS_LRADC
959 Say Y here if you have a touchscreen connected to the low-resolution
960 analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
962 To compile this driver as a module, choose M here: the module will be
965 config TOUCHSCREEN_MX25
966 tristate "Freescale i.MX25 touchscreen input driver"
967 depends on MFD_MX25_TSADC
969 Enable support for touchscreen connected to your i.MX25.
971 To compile this driver as a module, choose M here: the
972 module will be called fsl-imx25-tcq.
974 config TOUCHSCREEN_MC13783
975 tristate "Freescale MC13783 touchscreen input driver"
976 depends on MFD_MC13XXX
978 Say Y here if you have an Freescale MC13783 PMIC on your
979 board and want to use its touchscreen
983 To compile this driver as a module, choose M here: the
984 module will be called mc13783_ts.
986 config TOUCHSCREEN_USB_EGALAX
988 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
989 depends on TOUCHSCREEN_USB_COMPOSITE
991 config TOUCHSCREEN_USB_PANJIT
993 bool "PanJit device support" if EXPERT
994 depends on TOUCHSCREEN_USB_COMPOSITE
996 config TOUCHSCREEN_USB_3M
998 bool "3M/Microtouch EX II series device support" if EXPERT
999 depends on TOUCHSCREEN_USB_COMPOSITE
1001 config TOUCHSCREEN_USB_ITM
1003 bool "ITM device support" if EXPERT
1004 depends on TOUCHSCREEN_USB_COMPOSITE
1006 config TOUCHSCREEN_USB_ETURBO
1008 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
1009 depends on TOUCHSCREEN_USB_COMPOSITE
1011 config TOUCHSCREEN_USB_GUNZE
1013 bool "Gunze AHL61 device support" if EXPERT
1014 depends on TOUCHSCREEN_USB_COMPOSITE
1016 config TOUCHSCREEN_USB_DMC_TSC10
1018 bool "DMC TSC-10/25 device support" if EXPERT
1019 depends on TOUCHSCREEN_USB_COMPOSITE
1021 config TOUCHSCREEN_USB_IRTOUCH
1023 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1024 depends on TOUCHSCREEN_USB_COMPOSITE
1026 config TOUCHSCREEN_USB_IDEALTEK
1028 bool "IdealTEK URTC1000 device support" if EXPERT
1029 depends on TOUCHSCREEN_USB_COMPOSITE
1031 config TOUCHSCREEN_USB_GENERAL_TOUCH
1033 bool "GeneralTouch Touchscreen device support" if EXPERT
1034 depends on TOUCHSCREEN_USB_COMPOSITE
1036 config TOUCHSCREEN_USB_GOTOP
1038 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1039 depends on TOUCHSCREEN_USB_COMPOSITE
1041 config TOUCHSCREEN_USB_JASTEC
1043 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1044 depends on TOUCHSCREEN_USB_COMPOSITE
1046 config TOUCHSCREEN_USB_ELO
1048 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1049 depends on TOUCHSCREEN_USB_COMPOSITE
1051 config TOUCHSCREEN_USB_E2I
1053 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1054 depends on TOUCHSCREEN_USB_COMPOSITE
1056 config TOUCHSCREEN_USB_ZYTRONIC
1058 bool "Zytronic controller" if EXPERT
1059 depends on TOUCHSCREEN_USB_COMPOSITE
1061 config TOUCHSCREEN_USB_ETT_TC45USB
1063 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1064 depends on TOUCHSCREEN_USB_COMPOSITE
1066 config TOUCHSCREEN_USB_NEXIO
1068 bool "NEXIO/iNexio device support" if EXPERT
1069 depends on TOUCHSCREEN_USB_COMPOSITE
1071 config TOUCHSCREEN_USB_EASYTOUCH
1073 bool "EasyTouch USB Touch controller device support" if EXPERT
1074 depends on TOUCHSCREEN_USB_COMPOSITE
1076 Say Y here if you have an EasyTouch USB Touch controller.
1079 config TOUCHSCREEN_TOUCHIT213
1080 tristate "Sahara TouchIT-213 touchscreen"
1083 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1087 To compile this driver as a module, choose M here: the
1088 module will be called touchit213.
1090 config TOUCHSCREEN_TS4800
1091 tristate "TS-4800 touchscreen"
1092 depends on HAS_IOMEM && OF
1093 depends on SOC_IMX51 || COMPILE_TEST
1096 Say Y here if you have a touchscreen on a TS-4800 board.
1098 On TS-4800, the touchscreen is not handled directly by Linux but by
1103 To compile this driver as a module, choose M here: the
1104 module will be called ts4800_ts.
1106 config TOUCHSCREEN_TSC_SERIO
1107 tristate "TSC-10/25/40 serial touchscreen support"
1110 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1115 To compile this driver as a module, choose M here: the
1116 module will be called tsc40.
1118 config TOUCHSCREEN_TSC200X_CORE
1121 config TOUCHSCREEN_TSC2004
1122 tristate "TSC2004 based touchscreens"
1125 select TOUCHSCREEN_TSC200X_CORE
1127 Say Y here if you have a TSC2004 based touchscreen.
1131 To compile this driver as a module, choose M here: the
1132 module will be called tsc2004.
1134 config TOUCHSCREEN_TSC2005
1135 tristate "TSC2005 based touchscreens"
1136 depends on SPI_MASTER
1138 select TOUCHSCREEN_TSC200X_CORE
1140 Say Y here if you have a TSC2005 based touchscreen.
1144 To compile this driver as a module, choose M here: the
1145 module will be called tsc2005.
1147 config TOUCHSCREEN_TSC2007
1148 tristate "TSC2007 based touchscreens"
1151 Say Y here if you have a TSC2007 based touchscreen.
1155 To compile this driver as a module, choose M here: the
1156 module will be called tsc2007.
1158 config TOUCHSCREEN_TSC2007_IIO
1159 bool "IIO interface for external ADC input and temperature"
1160 depends on TOUCHSCREEN_TSC2007
1161 depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1163 Saying Y here adds an iio interface to the tsc2007 which
1164 provides values for the AUX input (used for e.g. battery
1165 or ambient light monitoring), temperature and raw input
1168 config TOUCHSCREEN_PCAP
1169 tristate "Motorola PCAP touchscreen"
1172 Say Y here if you have a Motorola EZX telephone and
1173 want to enable support for the built-in touchscreen.
1175 To compile this driver as a module, choose M here: the
1176 module will be called pcap_ts.
1178 config TOUCHSCREEN_RM_TS
1179 tristate "Raydium I2C Touchscreen"
1181 depends on GPIOLIB || COMPILE_TEST
1183 Say Y here if you have Raydium series I2C touchscreen,
1184 such as RM32380, connected to your system.
1188 To compile this driver as a module, choose M here: the
1189 module will be called raydium_i2c_ts.
1191 config TOUCHSCREEN_SILEAD
1192 tristate "Silead I2C touchscreen"
1195 Say Y here if you have the Silead touchscreen connected to
1200 To compile this driver as a module, choose M here: the
1201 module will be called silead.
1203 config TOUCHSCREEN_SIS_I2C
1204 tristate "SiS 9200 family I2C touchscreen"
1207 depends on GPIOLIB || COMPILE_TEST
1209 This enables support for SiS 9200 family over I2C based touchscreens.
1213 To compile this driver as a module, choose M here: the
1214 module will be called sis_i2c.
1216 config TOUCHSCREEN_ST1232
1217 tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
1220 Say Y here if you want to support the Sitronix ST1232
1221 or ST1633 touchscreen controller.
1225 To compile this driver as a module, choose M here: the
1226 module will be called st1232_ts.
1228 config TOUCHSCREEN_STMFTS
1229 tristate "STMicroelectronics STMFTS touchscreen"
1231 depends on LEDS_CLASS
1233 Say Y here if you want support for STMicroelectronics
1236 To compile this driver as a module, choose M here: the
1237 module will be called stmfts.
1239 config TOUCHSCREEN_STMPE
1240 tristate "STMicroelectronics STMPE touchscreens"
1241 depends on MFD_STMPE
1244 Say Y here if you want support for STMicroelectronics
1245 STMPE touchscreen controllers.
1247 To compile this driver as a module, choose M here: the
1248 module will be called stmpe-ts.
1250 config TOUCHSCREEN_SUN4I
1251 tristate "Allwinner sun4i resistive touchscreen controller support"
1252 depends on ARCH_SUNXI || COMPILE_TEST
1254 depends on THERMAL || !THERMAL_OF
1256 This selects support for the resistive touchscreen controller
1257 found on Allwinner sunxi SoCs.
1259 To compile this driver as a module, choose M here: the
1260 module will be called sun4i-ts.
1262 config TOUCHSCREEN_SUR40
1263 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1264 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1265 depends on VIDEO_DEV
1266 select VIDEOBUF2_DMA_SG
1268 Say Y here if you want support for the Samsung SUR40 touchscreen
1269 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1271 To compile this driver as a module, choose M here: the
1272 module will be called sur40.
1274 config TOUCHSCREEN_SURFACE3_SPI
1275 tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1277 depends on GPIOLIB || COMPILE_TEST
1279 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1280 controller chip as found on the Surface 3 in your system.
1284 To compile this driver as a module, choose M here: the
1285 module will be called surface3_spi.
1287 config TOUCHSCREEN_SX8654
1288 tristate "Semtech SX8654 touchscreen"
1291 Say Y here if you have a Semtech SX8654 touchscreen controller.
1295 To compile this driver as a module, choose M here: the
1296 module will be called sx8654.
1298 config TOUCHSCREEN_TPS6507X
1299 tristate "TPS6507x based touchscreens"
1302 Say Y here if you have a TPS6507x based touchscreen
1307 To compile this driver as a module, choose M here: the
1308 module will be called tps6507x_ts.
1310 config TOUCHSCREEN_ZET6223
1311 tristate "Zeitec ZET6223 touchscreen driver"
1314 Say Y here if you have a touchscreen using Zeitec ZET6223
1318 To compile this driver as a module, choose M here: the
1319 module will be called zet6223.
1321 config TOUCHSCREEN_ZFORCE
1322 tristate "Neonode zForce infrared touchscreens"
1324 depends on GPIOLIB || COMPILE_TEST
1326 Say Y here if you have a touchscreen using the zforce
1327 infraread technology from Neonode.
1331 To compile this driver as a module, choose M here: the
1332 module will be called zforce_ts.
1334 config TOUCHSCREEN_COLIBRI_VF50
1335 tristate "Toradex Colibri on board touchscreen driver"
1337 depends on GPIOLIB || COMPILE_TEST
1339 Say Y here if you have a Colibri VF50 and plan to use
1340 the on-board provided 4-wire touchscreen driver.
1344 To compile this driver as a module, choose M here: the
1345 module will be called colibri_vf50_ts.
1347 config TOUCHSCREEN_ROHM_BU21023
1348 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1351 Say Y here if you have a touchscreen using ROHM BU21023/24.
1355 To compile this driver as a module, choose M here: the
1356 module will be called bu21023_ts.
1358 config TOUCHSCREEN_IQS5XX
1359 tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
1362 Say Y to enable support for the Azoteq IQS550/572/525
1363 family of trackpad/touchscreen controllers.
1365 To compile this driver as a module, choose M here: the
1366 module will be called iqs5xx.
1368 config TOUCHSCREEN_IQS7211
1369 tristate "Azoteq IQS7210A/7211A/E trackpad/touchscreen controller"
1372 Say Y to enable support for the Azoteq IQS7210A/7211A/E
1373 family of trackpad/touchscreen controllers.
1375 To compile this driver as a module, choose M here: the
1376 module will be called iqs7211.
1378 config TOUCHSCREEN_ZINITIX
1379 tristate "Zinitix touchscreen support"
1382 Say Y here if you have a touchscreen using Zinitix bt541,
1383 or something similar enough.
1387 To compile this driver as a module, choose M here: the
1388 module will be called zinitix.
1390 config TOUCHSCREEN_HIMAX_HX83112B
1391 tristate "Himax hx83112b touchscreen driver"
1395 Say Y here to enable support for Himax hx83112b touchscreens.
1399 To compile this driver as a module, choose M here: the
1400 module will be called himax_hx83112b.