1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (c) 2011-2016 Synaptics Incorporated
4 * Copyright (c) 2011 Unixphere
6 * This driver provides the core support for a single RMI4-based device.
8 * The RMI4 specification can be found here (URL split for line length):
10 * http://www.synaptics.com/sites/default/files/
11 * 511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
14 #include <linux/bitmap.h>
15 #include <linux/delay.h>
17 #include <linux/irq.h>
19 #include <linux/slab.h>
21 #include <linux/irqdomain.h>
22 #include <uapi/linux/input.h>
23 #include <linux/rmi.h>
25 #include "rmi_driver.h"
27 #define HAS_NONSTANDARD_PDT_MASK 0x40
28 #define RMI4_MAX_PAGE 0xff
29 #define RMI4_PAGE_SIZE 0x100
30 #define RMI4_PAGE_MASK 0xFF00
32 #define RMI_DEVICE_RESET_CMD 0x01
33 #define DEFAULT_RESET_DELAY_MS 100
35 void rmi_free_function_list(struct rmi_device *rmi_dev)
37 struct rmi_function *fn, *tmp;
38 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
40 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
42 /* Doing it in the reverse order so F01 will be removed last */
43 list_for_each_entry_safe_reverse(fn, tmp,
44 &data->function_list, node) {
46 rmi_unregister_function(fn);
49 devm_kfree(&rmi_dev->dev, data->irq_memory);
50 data->irq_memory = NULL;
51 data->irq_status = NULL;
52 data->fn_irq_bits = NULL;
53 data->current_irq_mask = NULL;
54 data->new_irq_mask = NULL;
56 data->f01_container = NULL;
57 data->f34_container = NULL;
60 static int reset_one_function(struct rmi_function *fn)
62 struct rmi_function_handler *fh;
65 if (!fn || !fn->dev.driver)
68 fh = to_rmi_function_handler(fn->dev.driver);
70 retval = fh->reset(fn);
72 dev_err(&fn->dev, "Reset failed with code %d.\n",
79 static int configure_one_function(struct rmi_function *fn)
81 struct rmi_function_handler *fh;
84 if (!fn || !fn->dev.driver)
87 fh = to_rmi_function_handler(fn->dev.driver);
89 retval = fh->config(fn);
91 dev_err(&fn->dev, "Config failed with code %d.\n",
98 static int rmi_driver_process_reset_requests(struct rmi_device *rmi_dev)
100 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
101 struct rmi_function *entry;
104 list_for_each_entry(entry, &data->function_list, node) {
105 retval = reset_one_function(entry);
113 static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev)
115 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
116 struct rmi_function *entry;
119 list_for_each_entry(entry, &data->function_list, node) {
120 retval = configure_one_function(entry);
128 static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
130 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
131 struct device *dev = &rmi_dev->dev;
138 if (!data->attn_data.data) {
139 error = rmi_read_block(rmi_dev,
140 data->f01_container->fd.data_base_addr + 1,
141 data->irq_status, data->num_of_irq_regs);
143 dev_err(dev, "Failed to read irqs, code=%d\n", error);
148 mutex_lock(&data->irq_mutex);
149 bitmap_and(data->irq_status, data->irq_status, data->fn_irq_bits,
152 * At this point, irq_status has all bits that are set in the
153 * interrupt status register and are enabled.
155 mutex_unlock(&data->irq_mutex);
157 for_each_set_bit(i, data->irq_status, data->irq_count)
158 handle_nested_irq(irq_find_mapping(data->irqdomain, i));
161 input_sync(data->input);
166 void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
167 void *data, size_t size)
169 struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
170 struct rmi4_attn_data attn_data;
173 if (!drvdata->enabled)
176 fifo_data = kmemdup(data, size, GFP_ATOMIC);
180 attn_data.irq_status = irq_status;
181 attn_data.size = size;
182 attn_data.data = fifo_data;
184 kfifo_put(&drvdata->attn_fifo, attn_data);
186 EXPORT_SYMBOL_GPL(rmi_set_attn_data);
188 static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
190 struct rmi_device *rmi_dev = dev_id;
191 struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
192 struct rmi4_attn_data attn_data = {0};
195 count = kfifo_get(&drvdata->attn_fifo, &attn_data);
197 *(drvdata->irq_status) = attn_data.irq_status;
198 drvdata->attn_data = attn_data;
201 ret = rmi_process_interrupt_requests(rmi_dev);
203 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
204 "Failed to process interrupt request: %d\n", ret);
207 kfree(attn_data.data);
208 drvdata->attn_data.data = NULL;
211 if (!kfifo_is_empty(&drvdata->attn_fifo))
212 return rmi_irq_fn(irq, dev_id);
217 static int rmi_irq_init(struct rmi_device *rmi_dev)
219 struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
220 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
221 int irq_flags = irq_get_trigger_type(pdata->irq);
225 irq_flags = IRQF_TRIGGER_LOW;
227 ret = devm_request_threaded_irq(&rmi_dev->dev, pdata->irq, NULL,
228 rmi_irq_fn, irq_flags | IRQF_ONESHOT,
229 dev_driver_string(rmi_dev->xport->dev),
232 dev_err(&rmi_dev->dev, "Failed to register interrupt %d\n",
238 data->enabled = true;
243 struct rmi_function *rmi_find_function(struct rmi_device *rmi_dev, u8 number)
245 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
246 struct rmi_function *entry;
248 list_for_each_entry(entry, &data->function_list, node) {
249 if (entry->fd.function_number == number)
256 static int suspend_one_function(struct rmi_function *fn)
258 struct rmi_function_handler *fh;
261 if (!fn || !fn->dev.driver)
264 fh = to_rmi_function_handler(fn->dev.driver);
266 retval = fh->suspend(fn);
268 dev_err(&fn->dev, "Suspend failed with code %d.\n",
275 static int rmi_suspend_functions(struct rmi_device *rmi_dev)
277 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
278 struct rmi_function *entry;
281 list_for_each_entry(entry, &data->function_list, node) {
282 retval = suspend_one_function(entry);
290 static int resume_one_function(struct rmi_function *fn)
292 struct rmi_function_handler *fh;
295 if (!fn || !fn->dev.driver)
298 fh = to_rmi_function_handler(fn->dev.driver);
300 retval = fh->resume(fn);
302 dev_err(&fn->dev, "Resume failed with code %d.\n",
309 static int rmi_resume_functions(struct rmi_device *rmi_dev)
311 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
312 struct rmi_function *entry;
315 list_for_each_entry(entry, &data->function_list, node) {
316 retval = resume_one_function(entry);
324 int rmi_enable_sensor(struct rmi_device *rmi_dev)
328 retval = rmi_driver_process_config_requests(rmi_dev);
332 return rmi_process_interrupt_requests(rmi_dev);
336 * rmi_driver_set_input_params - set input device id and other data.
338 * @rmi_dev: Pointer to an RMI device
339 * @input: Pointer to input device
342 static int rmi_driver_set_input_params(struct rmi_device *rmi_dev,
343 struct input_dev *input)
345 input->name = SYNAPTICS_INPUT_DEVICE_NAME;
346 input->id.vendor = SYNAPTICS_VENDOR_ID;
347 input->id.bustype = BUS_RMI;
351 static void rmi_driver_set_input_name(struct rmi_device *rmi_dev,
352 struct input_dev *input)
354 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
355 const char *device_name = rmi_f01_get_product_ID(data->f01_container);
358 name = devm_kasprintf(&rmi_dev->dev, GFP_KERNEL,
359 "Synaptics %s", device_name);
366 static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
370 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
371 struct device *dev = &rmi_dev->dev;
373 mutex_lock(&data->irq_mutex);
374 bitmap_or(data->new_irq_mask,
375 data->current_irq_mask, mask, data->irq_count);
377 error = rmi_write_block(rmi_dev,
378 data->f01_container->fd.control_base_addr + 1,
379 data->new_irq_mask, data->num_of_irq_regs);
381 dev_err(dev, "%s: Failed to change enabled interrupts!",
385 bitmap_copy(data->current_irq_mask, data->new_irq_mask,
386 data->num_of_irq_regs);
388 bitmap_or(data->fn_irq_bits, data->fn_irq_bits, mask, data->irq_count);
391 mutex_unlock(&data->irq_mutex);
395 static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
399 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
400 struct device *dev = &rmi_dev->dev;
402 mutex_lock(&data->irq_mutex);
403 bitmap_andnot(data->fn_irq_bits,
404 data->fn_irq_bits, mask, data->irq_count);
405 bitmap_andnot(data->new_irq_mask,
406 data->current_irq_mask, mask, data->irq_count);
408 error = rmi_write_block(rmi_dev,
409 data->f01_container->fd.control_base_addr + 1,
410 data->new_irq_mask, data->num_of_irq_regs);
412 dev_err(dev, "%s: Failed to change enabled interrupts!",
416 bitmap_copy(data->current_irq_mask, data->new_irq_mask,
417 data->num_of_irq_regs);
420 mutex_unlock(&data->irq_mutex);
424 static int rmi_driver_reset_handler(struct rmi_device *rmi_dev)
426 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
430 * Can get called before the driver is fully ready to deal with
433 if (!data || !data->f01_container) {
434 dev_warn(&rmi_dev->dev,
435 "Not ready to handle reset yet!\n");
439 error = rmi_read_block(rmi_dev,
440 data->f01_container->fd.control_base_addr + 1,
441 data->current_irq_mask, data->num_of_irq_regs);
443 dev_err(&rmi_dev->dev, "%s: Failed to read current IRQ mask.\n",
448 error = rmi_driver_process_reset_requests(rmi_dev);
452 error = rmi_driver_process_config_requests(rmi_dev);
459 static int rmi_read_pdt_entry(struct rmi_device *rmi_dev,
460 struct pdt_entry *entry, u16 pdt_address)
462 u8 buf[RMI_PDT_ENTRY_SIZE];
465 error = rmi_read_block(rmi_dev, pdt_address, buf, RMI_PDT_ENTRY_SIZE);
467 dev_err(&rmi_dev->dev, "Read PDT entry at %#06x failed, code: %d.\n",
472 entry->page_start = pdt_address & RMI4_PAGE_MASK;
473 entry->query_base_addr = buf[0];
474 entry->command_base_addr = buf[1];
475 entry->control_base_addr = buf[2];
476 entry->data_base_addr = buf[3];
477 entry->interrupt_source_count = buf[4] & RMI_PDT_INT_SOURCE_COUNT_MASK;
478 entry->function_version = (buf[4] & RMI_PDT_FUNCTION_VERSION_MASK) >> 5;
479 entry->function_number = buf[5];
484 static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt,
485 struct rmi_function_descriptor *fd)
487 fd->query_base_addr = pdt->query_base_addr + pdt->page_start;
488 fd->command_base_addr = pdt->command_base_addr + pdt->page_start;
489 fd->control_base_addr = pdt->control_base_addr + pdt->page_start;
490 fd->data_base_addr = pdt->data_base_addr + pdt->page_start;
491 fd->function_number = pdt->function_number;
492 fd->interrupt_source_count = pdt->interrupt_source_count;
493 fd->function_version = pdt->function_version;
496 #define RMI_SCAN_CONTINUE 0
497 #define RMI_SCAN_DONE 1
499 static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
503 int (*callback)(struct rmi_device *rmi_dev,
505 const struct pdt_entry *entry))
507 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
508 struct pdt_entry pdt_entry;
509 u16 page_start = RMI4_PAGE_SIZE * page;
510 u16 pdt_start = page_start + PDT_START_SCAN_LOCATION;
511 u16 pdt_end = page_start + PDT_END_SCAN_LOCATION;
516 for (addr = pdt_start; addr >= pdt_end; addr -= RMI_PDT_ENTRY_SIZE) {
517 error = rmi_read_pdt_entry(rmi_dev, &pdt_entry, addr);
521 if (RMI4_END_OF_PDT(pdt_entry.function_number))
524 retval = callback(rmi_dev, ctx, &pdt_entry);
525 if (retval != RMI_SCAN_CONTINUE)
530 * Count number of empty PDT pages. If a gap of two pages
531 * or more is found, stop scanning.
533 if (addr == pdt_start)
538 return (data->bootloader_mode || *empty_pages >= 2) ?
539 RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
542 int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
543 int (*callback)(struct rmi_device *rmi_dev,
544 void *ctx, const struct pdt_entry *entry))
548 int retval = RMI_SCAN_DONE;
550 for (page = 0; page <= RMI4_MAX_PAGE; page++) {
551 retval = rmi_scan_pdt_page(rmi_dev, page, &empty_pages,
553 if (retval != RMI_SCAN_CONTINUE)
557 return retval < 0 ? retval : 0;
560 int rmi_read_register_desc(struct rmi_device *d, u16 addr,
561 struct rmi_register_descriptor *rdesc)
564 u8 size_presence_reg;
566 int presense_offset = 1;
575 * The first register of the register descriptor is the size of
576 * the register descriptor's presense register.
578 ret = rmi_read(d, addr, &size_presence_reg);
583 if (size_presence_reg < 0 || size_presence_reg > 35)
586 memset(buf, 0, sizeof(buf));
589 * The presence register contains the size of the register structure
590 * and a bitmap which identified which packet registers are present
591 * for this particular register type (ie query, control, or data).
593 ret = rmi_read_block(d, addr, buf, size_presence_reg);
600 rdesc->struct_size = buf[1] | (buf[2] << 8);
602 rdesc->struct_size = buf[0];
605 for (i = presense_offset; i < size_presence_reg; i++) {
606 for (b = 0; b < 8; b++) {
607 if (buf[i] & (0x1 << b))
608 bitmap_set(rdesc->presense_map, map_offset, 1);
613 rdesc->num_registers = bitmap_weight(rdesc->presense_map,
614 RMI_REG_DESC_PRESENSE_BITS);
616 rdesc->registers = devm_kcalloc(&d->dev,
617 rdesc->num_registers,
618 sizeof(struct rmi_register_desc_item),
620 if (!rdesc->registers)
624 * Allocate a temporary buffer to hold the register structure.
625 * I'm not using devm_kzalloc here since it will not be retained
626 * after exiting this function
628 struct_buf = kzalloc(rdesc->struct_size, GFP_KERNEL);
633 * The register structure contains information about every packet
634 * register of this type. This includes the size of the packet
635 * register and a bitmap of all subpackets contained in the packet
638 ret = rmi_read_block(d, addr, struct_buf, rdesc->struct_size);
640 goto free_struct_buff;
642 reg = find_first_bit(rdesc->presense_map, RMI_REG_DESC_PRESENSE_BITS);
643 for (i = 0; i < rdesc->num_registers; i++) {
644 struct rmi_register_desc_item *item = &rdesc->registers[i];
645 int reg_size = struct_buf[offset];
649 reg_size = struct_buf[offset] |
650 (struct_buf[offset + 1] << 8);
655 reg_size = struct_buf[offset] |
656 (struct_buf[offset + 1] << 8) |
657 (struct_buf[offset + 2] << 16) |
658 (struct_buf[offset + 3] << 24);
663 item->reg_size = reg_size;
668 for (b = 0; b < 7; b++) {
669 if (struct_buf[offset] & (0x1 << b))
670 bitmap_set(item->subpacket_map,
674 } while (struct_buf[offset++] & 0x80);
676 item->num_subpackets = bitmap_weight(item->subpacket_map,
677 RMI_REG_DESC_SUBPACKET_BITS);
679 rmi_dbg(RMI_DEBUG_CORE, &d->dev,
680 "%s: reg: %d reg size: %ld subpackets: %d\n", __func__,
681 item->reg, item->reg_size, item->num_subpackets);
683 reg = find_next_bit(rdesc->presense_map,
684 RMI_REG_DESC_PRESENSE_BITS, reg + 1);
692 const struct rmi_register_desc_item *rmi_get_register_desc_item(
693 struct rmi_register_descriptor *rdesc, u16 reg)
695 const struct rmi_register_desc_item *item;
698 for (i = 0; i < rdesc->num_registers; i++) {
699 item = &rdesc->registers[i];
700 if (item->reg == reg)
707 size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc)
709 const struct rmi_register_desc_item *item;
713 for (i = 0; i < rdesc->num_registers; i++) {
714 item = &rdesc->registers[i];
715 size += item->reg_size;
720 /* Compute the register offset relative to the base address */
721 int rmi_register_desc_calc_reg_offset(
722 struct rmi_register_descriptor *rdesc, u16 reg)
724 const struct rmi_register_desc_item *item;
728 for (i = 0; i < rdesc->num_registers; i++) {
729 item = &rdesc->registers[i];
730 if (item->reg == reg)
737 bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
740 return find_next_bit(item->subpacket_map, RMI_REG_DESC_PRESENSE_BITS,
741 subpacket) == subpacket;
744 static int rmi_check_bootloader_mode(struct rmi_device *rmi_dev,
745 const struct pdt_entry *pdt)
747 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
751 if (pdt->function_number == 0x34 && pdt->function_version > 1) {
752 ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
754 dev_err(&rmi_dev->dev,
755 "Failed to read F34 status: %d.\n", ret);
760 data->bootloader_mode = true;
761 } else if (pdt->function_number == 0x01) {
762 ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
764 dev_err(&rmi_dev->dev,
765 "Failed to read F01 status: %d.\n", ret);
770 data->bootloader_mode = true;
776 static int rmi_count_irqs(struct rmi_device *rmi_dev,
777 void *ctx, const struct pdt_entry *pdt)
779 int *irq_count = ctx;
782 *irq_count += pdt->interrupt_source_count;
784 ret = rmi_check_bootloader_mode(rmi_dev, pdt);
788 return RMI_SCAN_CONTINUE;
791 int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
792 const struct pdt_entry *pdt)
796 if (pdt->function_number == 0x01) {
797 u16 cmd_addr = pdt->page_start + pdt->command_base_addr;
798 u8 cmd_buf = RMI_DEVICE_RESET_CMD;
799 const struct rmi_device_platform_data *pdata =
800 rmi_get_platform_data(rmi_dev);
802 if (rmi_dev->xport->ops->reset) {
803 error = rmi_dev->xport->ops->reset(rmi_dev->xport,
808 return RMI_SCAN_DONE;
811 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Sending reset\n");
812 error = rmi_write_block(rmi_dev, cmd_addr, &cmd_buf, 1);
814 dev_err(&rmi_dev->dev,
815 "Initial reset failed. Code = %d.\n", error);
819 mdelay(pdata->reset_delay_ms ?: DEFAULT_RESET_DELAY_MS);
821 return RMI_SCAN_DONE;
824 /* F01 should always be on page 0. If we don't find it there, fail. */
825 return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV;
828 static int rmi_create_function(struct rmi_device *rmi_dev,
829 void *ctx, const struct pdt_entry *pdt)
831 struct device *dev = &rmi_dev->dev;
832 struct rmi_driver_data *data = dev_get_drvdata(dev);
833 int *current_irq_count = ctx;
834 struct rmi_function *fn;
838 rmi_dbg(RMI_DEBUG_CORE, dev, "Initializing F%02X.\n",
839 pdt->function_number);
841 fn = kzalloc(sizeof(struct rmi_function) +
842 BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long),
845 dev_err(dev, "Failed to allocate memory for F%02X\n",
846 pdt->function_number);
850 INIT_LIST_HEAD(&fn->node);
851 rmi_driver_copy_pdt_to_fd(pdt, &fn->fd);
853 fn->rmi_dev = rmi_dev;
855 fn->num_of_irqs = pdt->interrupt_source_count;
856 fn->irq_pos = *current_irq_count;
857 *current_irq_count += fn->num_of_irqs;
859 for (i = 0; i < fn->num_of_irqs; i++)
860 set_bit(fn->irq_pos + i, fn->irq_mask);
862 error = rmi_register_function(fn);
866 if (pdt->function_number == 0x01)
867 data->f01_container = fn;
868 else if (pdt->function_number == 0x34)
869 data->f34_container = fn;
871 list_add_tail(&fn->node, &data->function_list);
873 return RMI_SCAN_CONTINUE;
876 void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
878 struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
879 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
880 int irq = pdata->irq;
884 mutex_lock(&data->enabled_mutex);
890 data->enabled = true;
891 if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
892 retval = disable_irq_wake(irq);
894 dev_warn(&rmi_dev->dev,
895 "Failed to disable irq for wake: %d\n",
900 * Call rmi_process_interrupt_requests() after enabling irq,
901 * otherwise we may lose interrupt on edge-triggered systems.
903 irq_flags = irq_get_trigger_type(pdata->irq);
904 if (irq_flags & IRQ_TYPE_EDGE_BOTH)
905 rmi_process_interrupt_requests(rmi_dev);
908 mutex_unlock(&data->enabled_mutex);
911 void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake)
913 struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
914 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
915 struct rmi4_attn_data attn_data = {0};
916 int irq = pdata->irq;
919 mutex_lock(&data->enabled_mutex);
924 data->enabled = false;
926 if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
927 retval = enable_irq_wake(irq);
929 dev_warn(&rmi_dev->dev,
930 "Failed to enable irq for wake: %d\n",
934 /* make sure the fifo is clean */
935 while (!kfifo_is_empty(&data->attn_fifo)) {
936 count = kfifo_get(&data->attn_fifo, &attn_data);
938 kfree(attn_data.data);
942 mutex_unlock(&data->enabled_mutex);
945 int rmi_driver_suspend(struct rmi_device *rmi_dev, bool enable_wake)
949 retval = rmi_suspend_functions(rmi_dev);
951 dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
954 rmi_disable_irq(rmi_dev, enable_wake);
957 EXPORT_SYMBOL_GPL(rmi_driver_suspend);
959 int rmi_driver_resume(struct rmi_device *rmi_dev, bool clear_wake)
963 rmi_enable_irq(rmi_dev, clear_wake);
965 retval = rmi_resume_functions(rmi_dev);
967 dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
972 EXPORT_SYMBOL_GPL(rmi_driver_resume);
974 static int rmi_driver_remove(struct device *dev)
976 struct rmi_device *rmi_dev = to_rmi_device(dev);
977 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
979 rmi_disable_irq(rmi_dev, false);
981 irq_domain_remove(data->irqdomain);
982 data->irqdomain = NULL;
984 rmi_f34_remove_sysfs(rmi_dev);
985 rmi_free_function_list(rmi_dev);
991 static int rmi_driver_of_probe(struct device *dev,
992 struct rmi_device_platform_data *pdata)
996 retval = rmi_of_property_read_u32(dev, &pdata->reset_delay_ms,
997 "syna,reset-delay-ms", 1);
1004 static inline int rmi_driver_of_probe(struct device *dev,
1005 struct rmi_device_platform_data *pdata)
1011 int rmi_probe_interrupts(struct rmi_driver_data *data)
1013 struct rmi_device *rmi_dev = data->rmi_dev;
1014 struct device *dev = &rmi_dev->dev;
1015 struct fwnode_handle *fwnode = rmi_dev->xport->dev->fwnode;
1021 * We need to count the IRQs and allocate their storage before scanning
1022 * the PDT and creating the function entries, because adding a new
1023 * function can trigger events that result in the IRQ related storage
1026 rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__);
1027 data->bootloader_mode = false;
1029 retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
1031 dev_err(dev, "IRQ counting failed with code %d.\n", retval);
1035 if (data->bootloader_mode)
1036 dev_warn(dev, "Device in bootloader mode.\n");
1038 /* Allocate and register a linear revmap irq_domain */
1039 data->irqdomain = irq_domain_create_linear(fwnode, irq_count,
1040 &irq_domain_simple_ops,
1042 if (!data->irqdomain) {
1043 dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n");
1047 data->irq_count = irq_count;
1048 data->num_of_irq_regs = (data->irq_count + 7) / 8;
1050 size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
1051 data->irq_memory = devm_kcalloc(dev, size, 4, GFP_KERNEL);
1052 if (!data->irq_memory) {
1053 dev_err(dev, "Failed to allocate memory for irq masks.\n");
1057 data->irq_status = data->irq_memory + size * 0;
1058 data->fn_irq_bits = data->irq_memory + size * 1;
1059 data->current_irq_mask = data->irq_memory + size * 2;
1060 data->new_irq_mask = data->irq_memory + size * 3;
1065 int rmi_init_functions(struct rmi_driver_data *data)
1067 struct rmi_device *rmi_dev = data->rmi_dev;
1068 struct device *dev = &rmi_dev->dev;
1072 rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
1073 retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
1075 dev_err(dev, "Function creation failed with code %d.\n",
1077 goto err_destroy_functions;
1080 if (!data->f01_container) {
1081 dev_err(dev, "Missing F01 container!\n");
1083 goto err_destroy_functions;
1086 retval = rmi_read_block(rmi_dev,
1087 data->f01_container->fd.control_base_addr + 1,
1088 data->current_irq_mask, data->num_of_irq_regs);
1090 dev_err(dev, "%s: Failed to read current IRQ mask.\n",
1092 goto err_destroy_functions;
1097 err_destroy_functions:
1098 rmi_free_function_list(rmi_dev);
1102 static int rmi_driver_probe(struct device *dev)
1104 struct rmi_driver *rmi_driver;
1105 struct rmi_driver_data *data;
1106 struct rmi_device_platform_data *pdata;
1107 struct rmi_device *rmi_dev;
1110 rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Starting probe.\n",
1113 if (!rmi_is_physical_device(dev)) {
1114 rmi_dbg(RMI_DEBUG_CORE, dev, "Not a physical device.\n");
1118 rmi_dev = to_rmi_device(dev);
1119 rmi_driver = to_rmi_driver(dev->driver);
1120 rmi_dev->driver = rmi_driver;
1122 pdata = rmi_get_platform_data(rmi_dev);
1124 if (rmi_dev->xport->dev->of_node) {
1125 retval = rmi_driver_of_probe(rmi_dev->xport->dev, pdata);
1130 data = devm_kzalloc(dev, sizeof(struct rmi_driver_data), GFP_KERNEL);
1134 INIT_LIST_HEAD(&data->function_list);
1135 data->rmi_dev = rmi_dev;
1136 dev_set_drvdata(&rmi_dev->dev, data);
1139 * Right before a warm boot, the sensor might be in some unusual state,
1140 * such as F54 diagnostics, or F34 bootloader mode after a firmware
1141 * or configuration update. In order to clear the sensor to a known
1142 * state and/or apply any updates, we issue a initial reset to clear any
1143 * previous settings and force it into normal operation.
1145 * We have to do this before actually building the PDT because
1146 * the reflash updates (if any) might cause various registers to move
1149 * For a number of reasons, this initial reset may fail to return
1150 * within the specified time, but we'll still be able to bring up the
1151 * driver normally after that failure. This occurs most commonly in
1152 * a cold boot situation (where then firmware takes longer to come up
1153 * than from a warm boot) and the reset_delay_ms in the platform data
1154 * has been set too short to accommodate that. Since the sensor will
1155 * eventually come up and be usable, we don't want to just fail here
1156 * and leave the customer's device unusable. So we warn them, and
1157 * continue processing.
1159 retval = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset);
1161 dev_warn(dev, "RMI initial reset failed! Continuing in spite of this.\n");
1163 retval = rmi_read(rmi_dev, PDT_PROPERTIES_LOCATION, &data->pdt_props);
1166 * we'll print out a warning and continue since
1167 * failure to get the PDT properties is not a cause to fail
1169 dev_warn(dev, "Could not read PDT properties from %#06x (code %d). Assuming 0x00.\n",
1170 PDT_PROPERTIES_LOCATION, retval);
1173 mutex_init(&data->irq_mutex);
1174 mutex_init(&data->enabled_mutex);
1176 retval = rmi_probe_interrupts(data);
1180 if (rmi_dev->xport->input) {
1182 * The transport driver already has an input device.
1183 * In some cases it is preferable to reuse the transport
1184 * devices input device instead of creating a new one here.
1185 * One example is some HID touchpads report "pass-through"
1186 * button events are not reported by rmi registers.
1188 data->input = rmi_dev->xport->input;
1190 data->input = devm_input_allocate_device(dev);
1192 dev_err(dev, "%s: Failed to allocate input device.\n",
1197 rmi_driver_set_input_params(rmi_dev, data->input);
1198 data->input->phys = devm_kasprintf(dev, GFP_KERNEL,
1199 "%s/input0", dev_name(dev));
1200 if (!data->input->phys) {
1206 retval = rmi_init_functions(data);
1210 retval = rmi_f34_create_sysfs(rmi_dev);
1215 rmi_driver_set_input_name(rmi_dev, data->input);
1216 if (!rmi_dev->xport->input) {
1217 retval = input_register_device(data->input);
1219 dev_err(dev, "%s: Failed to register input device.\n",
1221 goto err_destroy_functions;
1226 retval = rmi_irq_init(rmi_dev);
1228 goto err_destroy_functions;
1230 if (data->f01_container->dev.driver) {
1231 /* Driver already bound, so enable ATTN now. */
1232 retval = rmi_enable_sensor(rmi_dev);
1234 goto err_disable_irq;
1240 rmi_disable_irq(rmi_dev, false);
1241 err_destroy_functions:
1242 rmi_free_function_list(rmi_dev);
1247 static struct rmi_driver rmi_physical_driver = {
1249 .owner = THIS_MODULE,
1250 .name = "rmi4_physical",
1251 .bus = &rmi_bus_type,
1252 .probe = rmi_driver_probe,
1253 .remove = rmi_driver_remove,
1255 .reset_handler = rmi_driver_reset_handler,
1256 .clear_irq_bits = rmi_driver_clear_irq_bits,
1257 .set_irq_bits = rmi_driver_set_irq_bits,
1258 .set_input_params = rmi_driver_set_input_params,
1261 bool rmi_is_physical_driver(struct device_driver *drv)
1263 return drv == &rmi_physical_driver.driver;
1266 int __init rmi_register_physical_driver(void)
1270 error = driver_register(&rmi_physical_driver.driver);
1272 pr_err("%s: driver register failed, code=%d.\n", __func__,
1280 void __exit rmi_unregister_physical_driver(void)
1282 driver_unregister(&rmi_physical_driver.driver);