drivers/input/misc/pm8941-pwrkey.c

   1 /*
   2  * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
   3  * Copyright (c) 2014, Sony Mobile Communications Inc.
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 and
   7  * only version 2 as published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  */
  14
  15 #include <linux/delay.h>
  16 #include <linux/errno.h>
  17 #include <linux/input.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/kernel.h>
  20 #include <linux/log2.h>
  21 #include <linux/module.h>
  22 #include <linux/of.h>
  23 #include <linux/of_device.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/reboot.h>
  26 #include <linux/regmap.h>
  27
  28 #define PON_REV2                        0x01
  29
  30 #define PON_RT_STS                      0x10
  31 #define  PON_KPDPWR_N_SET               BIT(0)
  32 #define  PON_RESIN_N_SET                BIT(1)
  33
  34 #define PON_PS_HOLD_RST_CTL             0x5a
  35 #define PON_PS_HOLD_RST_CTL2            0x5b
  36 #define  PON_PS_HOLD_ENABLE             BIT(7)
  37 #define  PON_PS_HOLD_TYPE_MASK          0x0f
  38 #define  PON_PS_HOLD_TYPE_SHUTDOWN      4
  39 #define  PON_PS_HOLD_TYPE_HARD_RESET    7
  40
  41 #define PON_PULL_CTL                    0x70
  42 #define  PON_KPDPWR_PULL_UP             BIT(1)
  43 #define  PON_RESIN_PULL_UP              BIT(0)
  44
  45 #define PON_DBC_CTL                     0x71
  46 #define  PON_DBC_DELAY_MASK             0x7
  47
  48 struct pm8941_data {
  49         unsigned int pull_up_bit;
  50         unsigned int status_bit;
  51 };
  52
  53 struct pm8941_pwrkey {
  54         struct device *dev;
  55         int irq;
  56         u32 baseaddr;
  57         struct regmap *regmap;
  58         struct input_dev *input;
  59
  60         unsigned int revision;
  61         struct notifier_block reboot_notifier;
  62
  63         u32 code;
  64         const struct pm8941_data *data;
  65 };
  66
  67 static int pm8941_reboot_notify(struct notifier_block *nb,
  68                                 unsigned long code, void *unused)
  69 {
  70         struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
  71                                                     reboot_notifier);
  72         unsigned int enable_reg;
  73         unsigned int reset_type;
  74         int error;
  75
  76         /* PMICs with revision 0 have the enable bit in same register as ctrl */
  77         if (pwrkey->revision == 0)
  78                 enable_reg = PON_PS_HOLD_RST_CTL;
  79         else
  80                 enable_reg = PON_PS_HOLD_RST_CTL2;
  81
  82         error = regmap_update_bits(pwrkey->regmap,
  83                                    pwrkey->baseaddr + enable_reg,
  84                                    PON_PS_HOLD_ENABLE,
  85                                    0);
  86         if (error)
  87                 dev_err(pwrkey->dev,
  88                         "unable to clear ps hold reset enable: %d\n",
  89                         error);
  90
  91         /*
  92          * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
  93          * writes.
  94          */
  95         usleep_range(100, 1000);
  96
  97         switch (code) {
  98         case SYS_HALT:
  99         case SYS_POWER_OFF:
 100                 reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
 101                 break;
 102         case SYS_RESTART:
 103         default:
 104                 reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
 105                 break;
 106         }
 107
 108         error = regmap_update_bits(pwrkey->regmap,
 109                                    pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
 110                                    PON_PS_HOLD_TYPE_MASK,
 111                                    reset_type);
 112         if (error)
 113                 dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
 114                         error);
 115
 116         error = regmap_update_bits(pwrkey->regmap,
 117                                    pwrkey->baseaddr + enable_reg,
 118                                    PON_PS_HOLD_ENABLE,
 119                                    PON_PS_HOLD_ENABLE);
 120         if (error)
 121                 dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
 122
 123         return NOTIFY_DONE;
 124 }
 125
 126 static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
 127 {
 128         struct pm8941_pwrkey *pwrkey = _data;
 129         unsigned int sts;
 130         int error;
 131
 132         error = regmap_read(pwrkey->regmap,
 133                             pwrkey->baseaddr + PON_RT_STS, &sts);
 134         if (error)
 135                 return IRQ_HANDLED;
 136
 137         input_report_key(pwrkey->input, pwrkey->code,
 138                          sts & pwrkey->data->status_bit);
 139         input_sync(pwrkey->input);
 140
 141         return IRQ_HANDLED;
 142 }
 143
 144 static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
 145 {
 146         struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
 147
 148         if (device_may_wakeup(dev))
 149                 enable_irq_wake(pwrkey->irq);
 150
 151         return 0;
 152 }
 153
 154 static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
 155 {
 156         struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
 157
 158         if (device_may_wakeup(dev))
 159                 disable_irq_wake(pwrkey->irq);
 160
 161         return 0;
 162 }
 163
 164 static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
 165                          pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
 166
 167 static int pm8941_pwrkey_probe(struct platform_device *pdev)
 168 {
 169         struct pm8941_pwrkey *pwrkey;
 170         bool pull_up;
 171         struct device *parent;
 172         u32 req_delay;
 173         int error;
 174
 175         if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
 176                 req_delay = 15625;
 177
 178         if (req_delay > 2000000 || req_delay == 0) {
 179                 dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
 180                 return -EINVAL;
 181         }
 182
 183         pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
 184
 185         pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
 186         if (!pwrkey)
 187                 return -ENOMEM;
 188
 189         pwrkey->dev = &pdev->dev;
 190         pwrkey->data = of_device_get_match_data(&pdev->dev);
 191
 192         parent = pdev->dev.parent;
 193         pwrkey->regmap = dev_get_regmap(parent, NULL);
 194         if (!pwrkey->regmap) {
 195                 /*
 196                  * We failed to get regmap for parent. Let's see if we are
 197                  * a child of pon node and read regmap and reg from its
 198                  * parent.
 199                  */
 200                 pwrkey->regmap = dev_get_regmap(parent->parent, NULL);
 201                 if (!pwrkey->regmap) {
 202                         dev_err(&pdev->dev, "failed to locate regmap\n");
 203                         return -ENODEV;
 204                 }
 205
 206                 error = of_property_read_u32(parent->of_node,
 207                                              "reg", &pwrkey->baseaddr);
 208         } else {
 209                 error = of_property_read_u32(pdev->dev.of_node, "reg",
 210                                              &pwrkey->baseaddr);
 211         }
 212         if (error)
 213                 return error;
 214
 215         pwrkey->irq = platform_get_irq(pdev, 0);
 216         if (pwrkey->irq < 0) {
 217                 dev_err(&pdev->dev, "failed to get irq\n");
 218                 return pwrkey->irq;
 219         }
 220
 221         error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
 222                             &pwrkey->revision);
 223         if (error) {
 224                 dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
 225                 return error;
 226         }
 227
 228         error = of_property_read_u32(pdev->dev.of_node, "linux,code",
 229                                      &pwrkey->code);
 230         if (error) {
 231                 dev_dbg(&pdev->dev,
 232                         "no linux,code assuming power (%d)\n", error);
 233                 pwrkey->code = KEY_POWER;
 234         }
 235
 236         pwrkey->input = devm_input_allocate_device(&pdev->dev);
 237         if (!pwrkey->input) {
 238                 dev_dbg(&pdev->dev, "unable to allocate input device\n");
 239                 return -ENOMEM;
 240         }
 241
 242         input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
 243
 244         pwrkey->input->name = "pm8941_pwrkey";
 245         pwrkey->input->phys = "pm8941_pwrkey/input0";
 246
 247         req_delay = (req_delay << 6) / USEC_PER_SEC;
 248         req_delay = ilog2(req_delay);
 249
 250         error = regmap_update_bits(pwrkey->regmap,
 251                                    pwrkey->baseaddr + PON_DBC_CTL,
 252                                    PON_DBC_DELAY_MASK,
 253                                    req_delay);
 254         if (error) {
 255                 dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
 256                 return error;
 257         }
 258
 259         error = regmap_update_bits(pwrkey->regmap,
 260                                    pwrkey->baseaddr + PON_PULL_CTL,
 261                                    pwrkey->data->pull_up_bit,
 262                                    pull_up ? pwrkey->data->pull_up_bit : 0);
 263         if (error) {
 264                 dev_err(&pdev->dev, "failed to set pull: %d\n", error);
 265                 return error;
 266         }
 267
 268         error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
 269                                           NULL, pm8941_pwrkey_irq,
 270                                           IRQF_ONESHOT,
 271                                           "pm8941_pwrkey", pwrkey);
 272         if (error) {
 273                 dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
 274                 return error;
 275         }
 276
 277         error = input_register_device(pwrkey->input);
 278         if (error) {
 279                 dev_err(&pdev->dev, "failed to register input device: %d\n",
 280                         error);
 281                 return error;
 282         }
 283
 284         pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify,
 285         error = register_reboot_notifier(&pwrkey->reboot_notifier);
 286         if (error) {
 287                 dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
 288                         error);
 289                 return error;
 290         }
 291
 292         platform_set_drvdata(pdev, pwrkey);
 293         device_init_wakeup(&pdev->dev, 1);
 294
 295         return 0;
 296 }
 297
 298 static int pm8941_pwrkey_remove(struct platform_device *pdev)
 299 {
 300         struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
 301
 302         unregister_reboot_notifier(&pwrkey->reboot_notifier);
 303
 304         return 0;
 305 }
 306
 307 static const struct pm8941_data pwrkey_data = {
 308         .pull_up_bit = PON_KPDPWR_PULL_UP,
 309         .status_bit = PON_KPDPWR_N_SET,
 310 };
 311
 312 static const struct pm8941_data resin_data = {
 313         .pull_up_bit = PON_RESIN_PULL_UP,
 314         .status_bit = PON_RESIN_N_SET,
 315 };
 316
 317 static const struct of_device_id pm8941_pwr_key_id_table[] = {
 318         { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
 319         { .compatible = "qcom,pm8941-resin", .data = &resin_data },
 320         { }
 321 };
 322 MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
 323
 324 static struct platform_driver pm8941_pwrkey_driver = {
 325         .probe = pm8941_pwrkey_probe,
 326         .remove = pm8941_pwrkey_remove,
 327         .driver = {
 328                 .name = "pm8941-pwrkey",
 329                 .pm = &pm8941_pwr_key_pm_ops,
 330                 .of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
 331         },
 332 };
 333 module_platform_driver(pm8941_pwrkey_driver);
 334
 335 MODULE_DESCRIPTION("PM8941 Power Key driver");
 336 MODULE_LICENSE("GPL v2");