GNU Linux-libre 4.14.251-gnu1
[releases.git] / drivers / iio / proximity / srf04.c
1 /*
2  * SRF04: ultrasonic sensor for distance measuring by using GPIOs
3  *
4  * Copyright (c) 2017 Andreas Klinger <ak@it-klinger.de>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14  * GNU General Public License for more details.
15  *
16  * For details about the device see:
17  * http://www.robot-electronics.co.uk/htm/srf04tech.htm
18  *
19  * the measurement cycle as timing diagram looks like:
20  *
21  *          +---+
22  * GPIO     |   |
23  * trig:  --+   +------------------------------------------------------
24  *          ^   ^
25  *          |<->|
26  *         udelay(10)
27  *
28  * ultra           +-+ +-+ +-+
29  * sonic           | | | | | |
30  * burst: ---------+ +-+ +-+ +-----------------------------------------
31  *                           .
32  * ultra                     .              +-+ +-+ +-+
33  * sonic                     .              | | | | | |
34  * echo:  ----------------------------------+ +-+ +-+ +----------------
35  *                           .                        .
36  *                           +------------------------+
37  * GPIO                      |                        |
38  * echo:  -------------------+                        +---------------
39  *                           ^                        ^
40  *                           interrupt                interrupt
41  *                           (ts_rising)              (ts_falling)
42  *                           |<---------------------->|
43  *                              pulse time measured
44  *                              --> one round trip of ultra sonic waves
45  */
46 #include <linux/err.h>
47 #include <linux/gpio/consumer.h>
48 #include <linux/kernel.h>
49 #include <linux/module.h>
50 #include <linux/of.h>
51 #include <linux/platform_device.h>
52 #include <linux/property.h>
53 #include <linux/sched.h>
54 #include <linux/interrupt.h>
55 #include <linux/delay.h>
56 #include <linux/iio/iio.h>
57 #include <linux/iio/sysfs.h>
58
59 struct srf04_data {
60         struct device           *dev;
61         struct gpio_desc        *gpiod_trig;
62         struct gpio_desc        *gpiod_echo;
63         struct mutex            lock;
64         int                     irqnr;
65         ktime_t                 ts_rising;
66         ktime_t                 ts_falling;
67         struct completion       rising;
68         struct completion       falling;
69 };
70
71 static irqreturn_t srf04_handle_irq(int irq, void *dev_id)
72 {
73         struct iio_dev *indio_dev = dev_id;
74         struct srf04_data *data = iio_priv(indio_dev);
75         ktime_t now = ktime_get();
76
77         if (gpiod_get_value(data->gpiod_echo)) {
78                 data->ts_rising = now;
79                 complete(&data->rising);
80         } else {
81                 data->ts_falling = now;
82                 complete(&data->falling);
83         }
84
85         return IRQ_HANDLED;
86 }
87
88 static int srf04_read(struct srf04_data *data)
89 {
90         int ret;
91         ktime_t ktime_dt;
92         u64 dt_ns;
93         u32 time_ns, distance_mm;
94
95         /*
96          * just one read-echo-cycle can take place at a time
97          * ==> lock against concurrent reading calls
98          */
99         mutex_lock(&data->lock);
100
101         reinit_completion(&data->rising);
102         reinit_completion(&data->falling);
103
104         gpiod_set_value(data->gpiod_trig, 1);
105         udelay(10);
106         gpiod_set_value(data->gpiod_trig, 0);
107
108         /* it should not take more than 20 ms until echo is rising */
109         ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
110         if (ret < 0) {
111                 mutex_unlock(&data->lock);
112                 return ret;
113         } else if (ret == 0) {
114                 mutex_unlock(&data->lock);
115                 return -ETIMEDOUT;
116         }
117
118         /* it cannot take more than 50 ms until echo is falling */
119         ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
120         if (ret < 0) {
121                 mutex_unlock(&data->lock);
122                 return ret;
123         } else if (ret == 0) {
124                 mutex_unlock(&data->lock);
125                 return -ETIMEDOUT;
126         }
127
128         ktime_dt = ktime_sub(data->ts_falling, data->ts_rising);
129
130         mutex_unlock(&data->lock);
131
132         dt_ns = ktime_to_ns(ktime_dt);
133         /*
134          * measuring more than 6,45 meters is beyond the capabilities of
135          * the supported sensors
136          * ==> filter out invalid results for not measuring echos of
137          *     another us sensor
138          *
139          * formula:
140          *         distance     6,45 * 2 m
141          * time = ---------- = ------------ = 40438871 ns
142          *          speed         319 m/s
143          *
144          * using a minimum speed at -20 °C of 319 m/s
145          */
146         if (dt_ns > 40438871)
147                 return -EIO;
148
149         time_ns = dt_ns;
150
151         /*
152          * the speed as function of the temperature is approximately:
153          *
154          * speed = 331,5 + 0,6 * Temp
155          *   with Temp in °C
156          *   and speed in m/s
157          *
158          * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
159          * temperature
160          *
161          * therefore:
162          *             time     343,5     time * 106
163          * distance = ------ * ------- = ------------
164          *             10^6         2         617176
165          *   with time in ns
166          *   and distance in mm (one way)
167          *
168          * because we limit to 6,45 meters the multiplication with 106 just
169          * fits into 32 bit
170          */
171         distance_mm = time_ns * 106 / 617176;
172
173         return distance_mm;
174 }
175
176 static int srf04_read_raw(struct iio_dev *indio_dev,
177                             struct iio_chan_spec const *channel, int *val,
178                             int *val2, long info)
179 {
180         struct srf04_data *data = iio_priv(indio_dev);
181         int ret;
182
183         if (channel->type != IIO_DISTANCE)
184                 return -EINVAL;
185
186         switch (info) {
187         case IIO_CHAN_INFO_RAW:
188                 ret = srf04_read(data);
189                 if (ret < 0)
190                         return ret;
191                 *val = ret;
192                 return IIO_VAL_INT;
193         case IIO_CHAN_INFO_SCALE:
194                 /*
195                  * theoretical maximum resolution is 3 mm
196                  * 1 LSB is 1 mm
197                  */
198                 *val = 0;
199                 *val2 = 1000;
200                 return IIO_VAL_INT_PLUS_MICRO;
201         default:
202                 return -EINVAL;
203         }
204 }
205
206 static const struct iio_info srf04_iio_info = {
207         .driver_module          = THIS_MODULE,
208         .read_raw               = srf04_read_raw,
209 };
210
211 static const struct iio_chan_spec srf04_chan_spec[] = {
212         {
213                 .type = IIO_DISTANCE,
214                 .info_mask_separate =
215                                 BIT(IIO_CHAN_INFO_RAW) |
216                                 BIT(IIO_CHAN_INFO_SCALE),
217         },
218 };
219
220 static int srf04_probe(struct platform_device *pdev)
221 {
222         struct device *dev = &pdev->dev;
223         struct srf04_data *data;
224         struct iio_dev *indio_dev;
225         int ret;
226
227         indio_dev = devm_iio_device_alloc(dev, sizeof(struct srf04_data));
228         if (!indio_dev) {
229                 dev_err(dev, "failed to allocate IIO device\n");
230                 return -ENOMEM;
231         }
232
233         data = iio_priv(indio_dev);
234         data->dev = dev;
235
236         mutex_init(&data->lock);
237         init_completion(&data->rising);
238         init_completion(&data->falling);
239
240         data->gpiod_trig = devm_gpiod_get(dev, "trig", GPIOD_OUT_LOW);
241         if (IS_ERR(data->gpiod_trig)) {
242                 dev_err(dev, "failed to get trig-gpios: err=%ld\n",
243                                         PTR_ERR(data->gpiod_trig));
244                 return PTR_ERR(data->gpiod_trig);
245         }
246
247         data->gpiod_echo = devm_gpiod_get(dev, "echo", GPIOD_IN);
248         if (IS_ERR(data->gpiod_echo)) {
249                 dev_err(dev, "failed to get echo-gpios: err=%ld\n",
250                                         PTR_ERR(data->gpiod_echo));
251                 return PTR_ERR(data->gpiod_echo);
252         }
253
254         if (gpiod_cansleep(data->gpiod_echo)) {
255                 dev_err(data->dev, "cansleep-GPIOs not supported\n");
256                 return -ENODEV;
257         }
258
259         data->irqnr = gpiod_to_irq(data->gpiod_echo);
260         if (data->irqnr < 0) {
261                 dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr);
262                 return data->irqnr;
263         }
264
265         ret = devm_request_irq(dev, data->irqnr, srf04_handle_irq,
266                         IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
267                         pdev->name, indio_dev);
268         if (ret < 0) {
269                 dev_err(data->dev, "request_irq: %d\n", ret);
270                 return ret;
271         }
272
273         platform_set_drvdata(pdev, indio_dev);
274
275         indio_dev->name = "srf04";
276         indio_dev->dev.parent = &pdev->dev;
277         indio_dev->info = &srf04_iio_info;
278         indio_dev->modes = INDIO_DIRECT_MODE;
279         indio_dev->channels = srf04_chan_spec;
280         indio_dev->num_channels = ARRAY_SIZE(srf04_chan_spec);
281
282         return devm_iio_device_register(dev, indio_dev);
283 }
284
285 static const struct of_device_id of_srf04_match[] = {
286         { .compatible = "devantech,srf04", },
287         {},
288 };
289
290 MODULE_DEVICE_TABLE(of, of_srf04_match);
291
292 static struct platform_driver srf04_driver = {
293         .probe          = srf04_probe,
294         .driver         = {
295                 .name           = "srf04-gpio",
296                 .of_match_table = of_srf04_match,
297         },
298 };
299
300 module_platform_driver(srf04_driver);
301
302 MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
303 MODULE_DESCRIPTION("SRF04 ultrasonic sensor for distance measuring using GPIOs");
304 MODULE_LICENSE("GPL");
305 MODULE_ALIAS("platform:srf04");