5 # When adding new entries keep the list in alphabetical order
10 tristate "ACPI Ambient Light Sensor"
13 select IIO_TRIGGERED_BUFFER
16 Say Y here if you want to build a driver for the ACPI0008
19 To compile this driver as a module, choose M here: the module will
23 tristate "ADJD-S311-CR999 digital color sensor"
25 select IIO_TRIGGERED_BUFFER
28 If you say yes here you get support for the Avago ADJD-S311-CR999
29 digital color light sensor.
31 This driver can also be built as a module. If so, the module
32 will be called adjd_s311.
35 tristate "AL3320A ambient light sensor"
38 Say Y here if you want to build a driver for the Dyna Image AL3320A
41 To compile this driver as a module, choose M here: the
42 module will be called al3320a.
45 tristate "APDS9300 ambient light sensor"
48 Say Y here if you want to build a driver for the Avago APDS9300
51 To compile this driver as a module, choose M here: the
52 module will be called apds9300.
55 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
61 Say Y here to build I2C interface support for the Avago
62 APDS9960 gesture/RGB/ALS/proximity sensor.
64 To compile this driver as a module, choose M here: the
65 module will be called apds9960
68 tristate "ROHM BH1750 ambient light sensor"
71 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
72 BH1750, BH1751 ambient light sensors.
74 To compile this driver as a module, choose M here: the module will
78 tristate "ROHM BH1780 ambient light sensor"
81 Say Y here to build support for the ROHM BH1780GLI ambient
84 To compile this driver as a module, choose M here: the module will
89 tristate "CM32181 driver"
91 Say Y here if you use cm32181.
92 This option enables ambient light sensor using
93 Capella cm32181 device driver.
95 To compile this driver as a module, choose M here:
96 the module will be called cm32181.
100 tristate "CM3232 ambient light sensor"
102 Say Y here if you use cm3232.
103 This option enables ambient light sensor using
104 Capella Microsystems cm3232 device driver.
106 To compile this driver as a module, choose M here:
107 the module will be called cm3232.
111 tristate "Capella CM3323 color light sensor"
113 Say Y here if you want to build a driver for Capella CM3323
116 To compile this driver as a module, choose M here: the module will
120 tristate "Capella CM3605 ambient light and proximity sensor"
123 Say Y here if you want to build a driver for Capella CM3605
124 ambient light and short range proximity sensor.
126 To compile this driver as a module, choose M here: the module will
131 tristate "CM36651 driver"
133 Say Y here if you use cm36651.
134 This option enables proximity & RGB sensor using
135 Capella cm36651 device driver.
137 To compile this driver as a module, choose M here:
138 the module will be called cm36651.
140 config IIO_CROS_EC_LIGHT_PROX
141 tristate "ChromeOS EC Light and Proximity Sensors"
142 depends on IIO_CROS_EC_SENSORS_CORE
144 Say Y here if you use the light and proximity sensors
145 presented by the ChromeOS EC Sensor hub.
147 To compile this driver as a module, choose M here:
148 the module will be called cros_ec_light_prox.
151 tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
155 select IIO_TRIGGERED_BUFFER
158 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
159 hooked to an I2C bus.
161 To compile this driver as a module, choose M here: the
162 module will be called gp2ap020a00f.
164 config SENSORS_ISL29018
165 tristate "Intersil 29018 light and proximity sensor"
170 If you say yes here you get support for ambient light sensing and
171 proximity infrared sensing from Intersil ISL29018.
172 This driver will provide the measurements of ambient light intensity
173 in lux, proximity infrared sensing and normal infrared sensing.
174 Data from sensor is accessible via sysfs.
176 config SENSORS_ISL29028
177 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
181 Provides driver for the Intersil's ISL29028 device.
182 This driver supports the sysfs interface to get the ALS, IR intensity,
183 Proximity value via iio. The ISL29028 provides the concurrent sensing
184 of ambient light and proximity.
187 tristate "Intersil ISL29125 digital color light sensor"
190 select IIO_TRIGGERED_BUFFER
192 Say Y here if you want to build a driver for the Intersil ISL29125
193 RGB light sensor for I2C.
195 To compile this driver as a module, choose M here: the module will be
198 config HID_SENSOR_ALS
199 depends on HID_SENSOR_HUB
201 select IIO_TRIGGERED_BUFFER
202 select HID_SENSOR_IIO_COMMON
203 select HID_SENSOR_IIO_TRIGGER
206 Say yes here to build support for the HID SENSOR
207 Ambient light sensor.
209 To compile this driver as a module, choose M here: the
210 module will be called hid-sensor-als.
212 config HID_SENSOR_PROX
213 depends on HID_SENSOR_HUB
215 select IIO_TRIGGERED_BUFFER
216 select HID_SENSOR_IIO_COMMON
217 select HID_SENSOR_IIO_TRIGGER
220 Say yes here to build support for the HID SENSOR
223 To compile this driver as a module, choose M here: the
224 module will be called hid-sensor-prox.
227 tristate "JSA1212 ALS and proximity sensor driver"
231 Say Y here if you want to build a IIO driver for JSA1212
232 proximity & ALS sensor device.
234 To compile this driver as a module, choose M here:
235 the module will be called jsa1212.
238 tristate "ROHM RPR0521 ALS and proximity sensor driver"
242 Say Y here if you want to build support for ROHM's RPR0521
243 ambient light and proximity sensor device.
245 To compile this driver as a module, choose M here:
246 the module will be called rpr0521.
248 config SENSORS_LM3533
249 tristate "LM3533 ambient light sensor"
250 depends on MFD_LM3533
252 If you say yes here you get support for the ambient light sensor
253 interface on National Semiconductor / TI LM3533 Lighting Power
256 The sensor interface can be used to control the LEDs and backlights
257 of the chip through defining five light zones and three sets of
258 corresponding output-current values.
260 The driver provides raw and mean adc readings along with the current
261 light zone through sysfs. A threshold event can be generated on zone
262 changes. The ALS-control output values can be set per zone for the
263 three current output channels.
266 tristate "LTR-501ALS-01 light sensor"
270 select IIO_TRIGGERED_BUFFER
272 If you say yes here you get support for the Lite-On LTR-501ALS-01
273 ambient light and proximity sensor. This driver also supports LTR-559
274 ALS/PS or LTR-301 ALS sensors.
276 This driver can also be built as a module. If so, the module
277 will be called ltr501.
280 tristate "LV0104CS Ambient Light Sensor"
283 Say Y here if you want to build support for the On Semiconductor
284 LV0104CS ambient light sensor.
286 To compile this driver as a module, choose M here:
287 the module will be called lv0104cs.
290 tristate "MAX44000 Ambient and Infrared Proximity Sensor"
294 select IIO_TRIGGERED_BUFFER
296 Say Y here if you want to build support for Maxim Integrated's
297 MAX44000 ambient and infrared proximity sensor device.
299 To compile this driver as a module, choose M here:
300 the module will be called max44000.
303 tristate "Texas Instruments OPT3001 Light Sensor"
306 If you say Y or M here, you get support for Texas Instruments
307 OPT3001 Ambient Light Sensor.
309 If built as a dynamically linked module, it will be called
313 tristate "TXC PA12203001 light and proximity sensor"
317 If you say yes here you get support for the TXC PA12203001
318 ambient light and proximity sensor.
320 This driver can also be built as a module. If so, the module
321 will be called pa12203001.
324 tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
328 Say Y here if you want to build a driver for the Silicon Labs SI1133
329 UV Index Sensor and Ambient Light Sensor chip.
331 To compile this driver as a module, choose M here: the module will be
335 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
338 select IIO_TRIGGERED_BUFFER
340 Say Y here if you want to build a driver for the Silicon Labs SI1132 or
341 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor
344 To compile this driver as a module, choose M here: the module will be
348 tristate "STK3310 ALS and proximity sensor"
352 Say yes here to get support for the Sensortek STK3310 ambient light
353 and proximity sensor. The STK3311 model is also supported by this
356 Choosing M will build the driver as a module. If so, the module
357 will be called stk3310.
360 tristate "STMicroelectronics UVIS25 sensor driver"
361 depends on (I2C || SPI)
363 select IIO_TRIGGERED_BUFFER
364 select ST_UVIS25_I2C if (I2C)
365 select ST_UVIS25_SPI if (SPI_MASTER)
367 Say yes here to build support for STMicroelectronics UVIS25
370 To compile this driver as a module, choose M here: the module
371 will be called st_uvis25.
384 tristate "TAOS TCS3414 digital color sensor"
387 select IIO_TRIGGERED_BUFFER
389 If you say yes here you get support for the TAOS TCS3414
390 family of digital color sensors.
392 This driver can also be built as a module. If so, the module
393 will be called tcs3414.
396 tristate "TAOS TCS3472 color light-to-digital converter"
399 select IIO_TRIGGERED_BUFFER
401 If you say yes here you get support for the TAOS TCS3472
402 family of color light-to-digital converters with IR filter.
404 This driver can also be built as a module. If so, the module
405 will be called tcs3472.
407 config SENSORS_TSL2563
408 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
411 If you say yes here you get support for the Taos TSL2560,
412 TSL2561, TSL2562 and TSL2563 ambient light sensors.
414 This driver can also be built as a module. If so, the module
415 will be called tsl2563.
418 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
421 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
422 Access ALS data via iio, sysfs.
425 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
428 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
429 tmd2672, tsl2772, tmd2772 devices.
430 Provides iio_events and direct access via sysfs.
433 tristate "TAOS TSL4531 ambient light sensors"
436 Say Y here if you want to build a driver for the TAOS TSL4531 family
437 of ambient light sensors with direct lux output.
439 To compile this driver as a module, choose M here: the
440 module will be called tsl4531.
443 tristate "UPISEMI light and proximity sensor"
446 If you say yes here you get support for the UPISEMI US5182D
447 ambient light and proximity sensor.
449 This driver can also be built as a module. If so, the module
450 will be called us5182d.
453 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
456 Say Y here if you want to build a driver for the Vishay VCNL4000,
457 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
460 To compile this driver as a module, choose M here: the
461 module will be called vcnl4000.
464 tristate "VEML6070 UV A light sensor"
467 Say Y here if you want to build a driver for the Vishay VEML6070 UV A
470 To compile this driver as a module, choose M here: the
471 module will be called veml6070.
474 tristate "VL6180 ALS, range and proximity sensor"
477 Say Y here if you want to build a driver for the STMicroelectronics
478 VL6180 combined ambient light, range and proximity sensor.
480 To compile this driver as a module, choose M here: the
481 module will be called vl6180.
484 tristate "ZOPT2201 ALS and UV B sensor"
487 Say Y here if you want to build a driver for the IDT
488 ZOPT2201 ambient light and UV B sensor.
490 To compile this driver as a module, choose M here: the
491 module will be called zopt2201.