1 # SPDX-License-Identifier: GPL-2.0-only
6 # When adding new entries keep the list in alphabetical order
11 tristate "ACPI Ambient Light Sensor"
14 select IIO_TRIGGERED_BUFFER
17 Say Y here if you want to build a driver for the ACPI0008
20 To compile this driver as a module, choose M here: the module will
24 tristate "ADJD-S311-CR999 digital color sensor"
26 select IIO_TRIGGERED_BUFFER
29 If you say yes here you get support for the Avago ADJD-S311-CR999
30 digital color light sensor.
32 This driver can also be built as a module. If so, the module
33 will be called adjd_s311.
36 tristate "ADUX1020 photometric sensor"
40 Say Y here if you want to build a driver for the Analog Devices
41 ADUX1020 photometric sensor.
43 To compile this driver as a module, choose M here: the
44 module will be called adux1020.
47 tristate "AL3010 ambient light sensor"
50 Say Y here if you want to build a driver for the Dyna Image AL3010
53 To compile this driver as a module, choose M here: the
54 module will be called al3010.
57 tristate "AL3320A ambient light sensor"
60 Say Y here if you want to build a driver for the Dyna Image AL3320A
63 To compile this driver as a module, choose M here: the
64 module will be called al3320a.
67 tristate "APDS9300 ambient light sensor"
70 Say Y here if you want to build a driver for the Avago APDS9300
73 To compile this driver as a module, choose M here: the
74 module will be called apds9300.
77 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
83 Say Y here to build I2C interface support for the Avago
84 APDS9960 gesture/RGB/ALS/proximity sensor.
86 To compile this driver as a module, choose M here: the
87 module will be called apds9960
90 tristate "AMS AS73211 XYZ color sensor"
93 select IIO_TRIGGERED_BUFFER
95 If you say yes here you get support for the AMS AS73211
96 JENCOLOR(R) Digital XYZ Sensor.
98 For triggered measurements, you will need an additional trigger driver
99 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
101 This driver can also be built as a module. If so, the module
102 will be called as73211.
105 tristate "ROHM BH1750 ambient light sensor"
108 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
109 BH1750, BH1751 ambient light sensors.
111 To compile this driver as a module, choose M here: the module will
115 tristate "ROHM BH1780 ambient light sensor"
118 Say Y here to build support for the ROHM BH1780GLI ambient
121 To compile this driver as a module, choose M here: the module will
126 tristate "CM32181 driver"
128 Say Y here if you use cm32181.
129 This option enables ambient light sensor using
130 Capella cm32181 device driver.
132 To compile this driver as a module, choose M here:
133 the module will be called cm32181.
137 tristate "CM3232 ambient light sensor"
139 Say Y here if you use cm3232.
140 This option enables ambient light sensor using
141 Capella Microsystems cm3232 device driver.
143 To compile this driver as a module, choose M here:
144 the module will be called cm3232.
148 tristate "Capella CM3323 color light sensor"
150 Say Y here if you want to build a driver for Capella CM3323
153 To compile this driver as a module, choose M here: the module will
157 tristate "Capella CM3605 ambient light and proximity sensor"
159 Say Y here if you want to build a driver for Capella CM3605
160 ambient light and short range proximity sensor.
162 To compile this driver as a module, choose M here: the module will
167 tristate "CM36651 driver"
169 Say Y here if you use cm36651.
170 This option enables proximity & RGB sensor using
171 Capella cm36651 device driver.
173 To compile this driver as a module, choose M here:
174 the module will be called cm36651.
176 config IIO_CROS_EC_LIGHT_PROX
177 tristate "ChromeOS EC Light and Proximity Sensors"
178 depends on IIO_CROS_EC_SENSORS_CORE
180 Say Y here if you use the light and proximity sensors
181 presented by the ChromeOS EC Sensor hub.
183 To compile this driver as a module, choose M here:
184 the module will be called cros_ec_light_prox.
187 tristate "Sharp GP2AP002 Proximity/ALS sensor"
191 Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip
192 hooked to an I2C bus.
194 To compile this driver as a module, choose M here: the
195 module will be called gp2ap002.
198 tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
202 select IIO_TRIGGERED_BUFFER
205 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
206 hooked to an I2C bus.
208 To compile this driver as a module, choose M here: the
209 module will be called gp2ap020a00f.
212 tristate "Azoteq IQS621/622 ambient light sensors"
213 depends on MFD_IQS62X || COMPILE_TEST
215 Say Y here if you want to build support for the Azoteq IQS621
216 and IQS622 ambient light sensors.
218 To compile this driver as a module, choose M here: the module
219 will be called iqs621-als.
221 config SENSORS_ISL29018
222 tristate "Intersil 29018 light and proximity sensor"
227 If you say yes here you get support for ambient light sensing and
228 proximity infrared sensing from Intersil ISL29018.
229 This driver will provide the measurements of ambient light intensity
230 in lux, proximity infrared sensing and normal infrared sensing.
231 Data from sensor is accessible via sysfs.
233 config SENSORS_ISL29028
234 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
238 Provides driver for the Intersil's ISL29028 device.
239 This driver supports the sysfs interface to get the ALS, IR intensity,
240 Proximity value via iio. The ISL29028 provides the concurrent sensing
241 of ambient light and proximity.
244 tristate "Intersil ISL29125 digital color light sensor"
247 select IIO_TRIGGERED_BUFFER
249 Say Y here if you want to build a driver for the Intersil ISL29125
250 RGB light sensor for I2C.
252 To compile this driver as a module, choose M here: the module will be
256 tristate "Intersil ISL76682 Light Sensor"
260 Say Y here if you want to build a driver for the Intersil ISL76682
261 Ambient Light Sensor and IR Intensity sensor. This driver provides
262 the readouts via standard IIO sysfs and device interface. Both ALS
263 illuminance and IR illuminance are provided raw with separate scale
264 setting which can be configured via sysfs, the default scale is 1000
265 lux, other options are 4000/16000/64000 lux.
267 To compile this driver as a module, choose M here: the module will be
270 config HID_SENSOR_ALS
271 depends on HID_SENSOR_HUB
273 select HID_SENSOR_IIO_COMMON
274 select HID_SENSOR_IIO_TRIGGER
277 Say yes here to build support for the HID SENSOR
278 Ambient light sensor.
280 To compile this driver as a module, choose M here: the
281 module will be called hid-sensor-als.
283 config HID_SENSOR_PROX
284 depends on HID_SENSOR_HUB
286 select HID_SENSOR_IIO_COMMON
287 select HID_SENSOR_IIO_TRIGGER
290 Say yes here to build support for the HID SENSOR
293 To compile this driver as a module, choose M here: the
294 module will be called hid-sensor-prox.
297 tristate "JSA1212 ALS and proximity sensor driver"
301 Say Y here if you want to build a IIO driver for JSA1212
302 proximity & ALS sensor device.
304 To compile this driver as a module, choose M here:
305 the module will be called jsa1212.
308 tristate "ROHM BU27008 color (RGB+C/IR) sensor"
311 select IIO_GTS_HELPER
313 Enable support for the ROHM BU27008 color sensor.
314 The ROHM BU27008 is a sensor with 5 photodiodes (red, green,
315 blue, clear and IR) with four configurable channels. Red and
316 green being always available and two out of the rest three
317 (blue, clear, IR) can be selected to be simultaneously measured.
318 Typical application is adjusting LCD backlight of TVs,
319 mobile phones and tablet PCs.
322 tristate "ROHM BU27034 ambient light sensor"
325 select IIO_GTS_HELPER
329 Enable support for the ROHM BU27034 ambient light sensor. ROHM BU27034
330 is an ambient light sesnor with 3 channels and 3 photo diodes capable
331 of detecting a very wide range of illuminance.
332 Typical application is adjusting LCD and backlight power of TVs and
336 tristate "ROHM RPR0521 ALS and proximity sensor driver"
340 select IIO_TRIGGERED_BUFFER
342 Say Y here if you want to build support for ROHM's RPR0521
343 ambient light and proximity sensor device.
345 To compile this driver as a module, choose M here:
346 the module will be called rpr0521.
348 config SENSORS_LM3533
349 tristate "LM3533 ambient light sensor"
350 depends on MFD_LM3533
352 If you say yes here you get support for the ambient light sensor
353 interface on National Semiconductor / TI LM3533 Lighting Power
356 The sensor interface can be used to control the LEDs and backlights
357 of the chip through defining five light zones and three sets of
358 corresponding output-current values.
360 The driver provides raw and mean adc readings along with the current
361 light zone through sysfs. A threshold event can be generated on zone
362 changes. The ALS-control output values can be set per zone for the
363 three current output channels.
366 tristate "LTR-390UV-01 ambient light and UV sensor"
370 If you say yes here you get support for the Lite-On LTR-390UV-01
371 ambient light and UV sensor.
373 This driver can also be built as a module. If so, the module
374 will be called ltr390.
377 tristate "LTR-501ALS-01 light sensor"
381 select IIO_TRIGGERED_BUFFER
383 If you say yes here you get support for the Lite-On LTR-501ALS-01
384 ambient light and proximity sensor. This driver also supports LTR-559
385 ALS/PS or LTR-301 ALS sensors.
387 This driver can also be built as a module. If so, the module
388 will be called ltr501.
391 tristate "Liteon LTRF216A Light Sensor"
395 If you say Y or M here, you get support for Liteon LTRF216A
396 Ambient Light Sensor.
398 If built as a dynamically linked module, it will be called
402 tristate "LV0104CS Ambient Light Sensor"
405 Say Y here if you want to build support for the On Semiconductor
406 LV0104CS ambient light sensor.
408 To compile this driver as a module, choose M here:
409 the module will be called lv0104cs.
412 tristate "MAX44000 Ambient and Infrared Proximity Sensor"
416 select IIO_TRIGGERED_BUFFER
418 Say Y here if you want to build support for Maxim Integrated's
419 MAX44000 ambient and infrared proximity sensor device.
421 To compile this driver as a module, choose M here:
422 the module will be called max44000.
425 tristate "MAX44009 Ambient Light Sensor"
429 Say Y here if you want to build support for Maxim Integrated's
430 MAX44009 ambient light sensor device.
432 To compile this driver as a module, choose M here:
433 the module will be called max44009.
436 tristate "ON Semiconductor NOA1305 ambient light sensor"
440 Say Y here if you want to build support for the ON Semiconductor
441 NOA1305 ambient light sensor.
443 To compile this driver as a module, choose M here:
444 The module will be called noa1305.
447 tristate "Texas Instruments OPT3001 Light Sensor"
450 If you say Y or M here, you get support for Texas Instruments
451 OPT3001 Ambient Light Sensor.
453 If built as a dynamically linked module, it will be called
457 tristate "Texas Instruments OPT4001 Light Sensor"
461 If you say Y or M here, you get support for Texas Instruments
462 OPT4001 Ambient Light Sensor.
464 If built as a dynamically linked module, it will be called
468 tristate "TXC PA12203001 light and proximity sensor"
472 If you say yes here you get support for the TXC PA12203001
473 ambient light and proximity sensor.
475 This driver can also be built as a module. If so, the module
476 will be called pa12203001.
479 tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
483 Say Y here if you want to build a driver for the Silicon Labs SI1133
484 UV Index Sensor and Ambient Light Sensor chip.
486 To compile this driver as a module, choose M here: the module will be
490 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
493 select IIO_TRIGGERED_BUFFER
495 Say Y here if you want to build a driver for the Silicon Labs SI1132 or
496 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor
499 To compile this driver as a module, choose M here: the module will be
503 tristate "STK3310 ALS and proximity sensor"
507 Say yes here to get support for the Sensortek STK3310 ambient light
508 and proximity sensor. The STK3311 model is also supported by this
511 Choosing M will build the driver as a module. If so, the module
512 will be called stk3310.
515 tristate "STMicroelectronics UVIS25 sensor driver"
516 depends on (I2C || SPI)
518 select IIO_TRIGGERED_BUFFER
519 select ST_UVIS25_I2C if (I2C)
520 select ST_UVIS25_SPI if (SPI_MASTER)
522 Say yes here to build support for STMicroelectronics UVIS25
525 To compile this driver as a module, choose M here: the module
526 will be called st_uvis25.
539 tristate "TAOS TCS3414 digital color sensor"
542 select IIO_TRIGGERED_BUFFER
544 If you say yes here you get support for the TAOS TCS3414
545 family of digital color sensors.
547 This driver can also be built as a module. If so, the module
548 will be called tcs3414.
551 tristate "TAOS TCS3472 color light-to-digital converter"
554 select IIO_TRIGGERED_BUFFER
556 If you say yes here you get support for the TAOS TCS3472
557 family of color light-to-digital converters with IR filter.
559 This driver can also be built as a module. If so, the module
560 will be called tcs3472.
562 config SENSORS_TSL2563
563 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
566 If you say yes here you get support for the Taos TSL2560,
567 TSL2561, TSL2562 and TSL2563 ambient light sensors.
569 This driver can also be built as a module. If so, the module
570 will be called tsl2563.
573 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
576 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
577 Access ALS data via iio, sysfs.
580 tristate "TAOS TSL2591 ambient light sensor"
583 Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor,
584 featuring channels for combined visible + IR intensity and lux illuminance.
585 Access data via iio and sysfs. Supports iio_events.
587 To compile this driver as a module, select M: the
588 module will be called tsl2591.
591 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
594 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
595 tmd2672, tsl2772, tmd2772 devices.
596 Provides iio_events and direct access via sysfs.
599 tristate "TAOS TSL4531 ambient light sensors"
602 Say Y here if you want to build a driver for the TAOS TSL4531 family
603 of ambient light sensors with direct lux output.
605 To compile this driver as a module, choose M here: the
606 module will be called tsl4531.
609 tristate "UPISEMI light and proximity sensor"
612 If you say yes here you get support for the UPISEMI US5182D
613 ambient light and proximity sensor.
615 This driver can also be built as a module. If so, the module
616 will be called us5182d.
619 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
621 select IIO_TRIGGERED_BUFFER
624 Say Y here if you want to build a driver for the Vishay VCNL4000,
625 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
628 To compile this driver as a module, choose M here: the
629 module will be called vcnl4000.
632 tristate "VCNL4035 combined ALS and proximity sensor"
634 select IIO_TRIGGERED_BUFFER
638 Say Y here if you want to build a driver for the Vishay VCNL4035,
639 combined ambient light (ALS) and proximity sensor. Currently only ALS
640 function is available.
642 To compile this driver as a module, choose M here: the
643 module will be called vcnl4035.
646 tristate "VEML6030 ambient light sensor"
650 Say Y here if you want to build a driver for the Vishay VEML6030
651 ambient light sensor (ALS).
653 To compile this driver as a module, choose M here: the
654 module will be called veml6030.
657 tristate "VEML6070 UV A light sensor"
660 Say Y here if you want to build a driver for the Vishay VEML6070 UV A
663 To compile this driver as a module, choose M here: the
664 module will be called veml6070.
667 tristate "VEML6075 UVA and UVB light sensor"
671 Say Y here if you want to build a driver for the Vishay VEML6075 UVA
672 and UVB light sensor.
674 To compile this driver as a module, choose M here: the
675 module will be called veml6075.
678 tristate "VL6180 ALS, range and proximity sensor"
681 Say Y here if you want to build a driver for the STMicroelectronics
682 VL6180 combined ambient light, range and proximity sensor.
684 To compile this driver as a module, choose M here: the
685 module will be called vl6180.
688 tristate "ZOPT2201 ALS and UV B sensor"
691 Say Y here if you want to build a driver for the IDT
692 ZOPT2201 ambient light and UV B sensor.
694 To compile this driver as a module, choose M here: the
695 module will be called zopt2201.