drivers/iio/adc/vf610_adc.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Freescale Vybrid vf610 ADC driver
   4  *
   5  * Copyright 2013 Freescale Semiconductor, Inc.
   6  */
   7
   8 #include <linux/mod_devicetable.h>
   9 #include <linux/module.h>
  10 #include <linux/mutex.h>
  11 #include <linux/property.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/interrupt.h>
  14 #include <linux/delay.h>
  15 #include <linux/kernel.h>
  16 #include <linux/slab.h>
  17 #include <linux/io.h>
  18 #include <linux/clk.h>
  19 #include <linux/completion.h>
  20 #include <linux/regulator/consumer.h>
  21 #include <linux/err.h>
  22
  23 #include <linux/iio/iio.h>
  24 #include <linux/iio/buffer.h>
  25 #include <linux/iio/sysfs.h>
  26 #include <linux/iio/trigger.h>
  27 #include <linux/iio/trigger_consumer.h>
  28 #include <linux/iio/triggered_buffer.h>
  29
  30 /* This will be the driver name the kernel reports */
  31 #define DRIVER_NAME "vf610-adc"
  32
  33 /* Vybrid/IMX ADC registers */
  34 #define VF610_REG_ADC_HC0               0x00
  35 #define VF610_REG_ADC_HC1               0x04
  36 #define VF610_REG_ADC_HS                0x08
  37 #define VF610_REG_ADC_R0                0x0c
  38 #define VF610_REG_ADC_R1                0x10
  39 #define VF610_REG_ADC_CFG               0x14
  40 #define VF610_REG_ADC_GC                0x18
  41 #define VF610_REG_ADC_GS                0x1c
  42 #define VF610_REG_ADC_CV                0x20
  43 #define VF610_REG_ADC_OFS               0x24
  44 #define VF610_REG_ADC_CAL               0x28
  45 #define VF610_REG_ADC_PCTL              0x30
  46
  47 /* Configuration register field define */
  48 #define VF610_ADC_MODE_BIT8             0x00
  49 #define VF610_ADC_MODE_BIT10            0x04
  50 #define VF610_ADC_MODE_BIT12            0x08
  51 #define VF610_ADC_MODE_MASK             0x0c
  52 #define VF610_ADC_BUSCLK2_SEL           0x01
  53 #define VF610_ADC_ALTCLK_SEL            0x02
  54 #define VF610_ADC_ADACK_SEL             0x03
  55 #define VF610_ADC_ADCCLK_MASK           0x03
  56 #define VF610_ADC_CLK_DIV2              0x20
  57 #define VF610_ADC_CLK_DIV4              0x40
  58 #define VF610_ADC_CLK_DIV8              0x60
  59 #define VF610_ADC_CLK_MASK              0x60
  60 #define VF610_ADC_ADLSMP_LONG           0x10
  61 #define VF610_ADC_ADSTS_SHORT   0x100
  62 #define VF610_ADC_ADSTS_NORMAL  0x200
  63 #define VF610_ADC_ADSTS_LONG    0x300
  64 #define VF610_ADC_ADSTS_MASK            0x300
  65 #define VF610_ADC_ADLPC_EN              0x80
  66 #define VF610_ADC_ADHSC_EN              0x400
  67 #define VF610_ADC_REFSEL_VALT           0x800
  68 #define VF610_ADC_REFSEL_VBG            0x1000
  69 #define VF610_ADC_ADTRG_HARD            0x2000
  70 #define VF610_ADC_AVGS_8                0x4000
  71 #define VF610_ADC_AVGS_16               0x8000
  72 #define VF610_ADC_AVGS_32               0xC000
  73 #define VF610_ADC_AVGS_MASK             0xC000
  74 #define VF610_ADC_OVWREN                0x10000
  75
  76 /* General control register field define */
  77 #define VF610_ADC_ADACKEN               0x1
  78 #define VF610_ADC_DMAEN                 0x2
  79 #define VF610_ADC_ACREN                 0x4
  80 #define VF610_ADC_ACFGT                 0x8
  81 #define VF610_ADC_ACFE                  0x10
  82 #define VF610_ADC_AVGEN                 0x20
  83 #define VF610_ADC_ADCON                 0x40
  84 #define VF610_ADC_CAL                   0x80
  85
  86 /* Other field define */
  87 #define VF610_ADC_ADCHC(x)              ((x) & 0x1F)
  88 #define VF610_ADC_AIEN                  (0x1 << 7)
  89 #define VF610_ADC_CONV_DISABLE          0x1F
  90 #define VF610_ADC_HS_COCO0              0x1
  91 #define VF610_ADC_CALF                  0x2
  92 #define VF610_ADC_TIMEOUT               msecs_to_jiffies(100)
  93
  94 #define DEFAULT_SAMPLE_TIME             1000
  95
  96 /* V at 25°C of 696 mV */
  97 #define VF610_VTEMP25_3V0               950
  98 /* V at 25°C of 699 mV */
  99 #define VF610_VTEMP25_3V3               867
 100 /* Typical sensor slope coefficient at all temperatures */
 101 #define VF610_TEMP_SLOPE_COEFF          1840
 102
 103 enum clk_sel {
 104         VF610_ADCIOC_BUSCLK_SET,
 105         VF610_ADCIOC_ALTCLK_SET,
 106         VF610_ADCIOC_ADACK_SET,
 107 };
 108
 109 enum vol_ref {
 110         VF610_ADCIOC_VR_VREF_SET,
 111         VF610_ADCIOC_VR_VALT_SET,
 112         VF610_ADCIOC_VR_VBG_SET,
 113 };
 114
 115 enum average_sel {
 116         VF610_ADC_SAMPLE_1,
 117         VF610_ADC_SAMPLE_4,
 118         VF610_ADC_SAMPLE_8,
 119         VF610_ADC_SAMPLE_16,
 120         VF610_ADC_SAMPLE_32,
 121 };
 122
 123 enum conversion_mode_sel {
 124         VF610_ADC_CONV_NORMAL,
 125         VF610_ADC_CONV_HIGH_SPEED,
 126         VF610_ADC_CONV_LOW_POWER,
 127 };
 128
 129 enum lst_adder_sel {
 130         VF610_ADCK_CYCLES_3,
 131         VF610_ADCK_CYCLES_5,
 132         VF610_ADCK_CYCLES_7,
 133         VF610_ADCK_CYCLES_9,
 134         VF610_ADCK_CYCLES_13,
 135         VF610_ADCK_CYCLES_17,
 136         VF610_ADCK_CYCLES_21,
 137         VF610_ADCK_CYCLES_25,
 138 };
 139
 140 struct vf610_adc_feature {
 141         enum clk_sel    clk_sel;
 142         enum vol_ref    vol_ref;
 143         enum conversion_mode_sel conv_mode;
 144
 145         int     clk_div;
 146         int     sample_rate;
 147         int     res_mode;
 148         u32 lst_adder_index;
 149         u32 default_sample_time;
 150
 151         bool    calibration;
 152         bool    ovwren;
 153 };
 154
 155 struct vf610_adc {
 156         struct device *dev;
 157         void __iomem *regs;
 158         struct clk *clk;
 159
 160         /* lock to protect against multiple access to the device */
 161         struct mutex lock;
 162
 163         u32 vref_uv;
 164         u32 value;
 165         struct regulator *vref;
 166
 167         u32 max_adck_rate[3];
 168         struct vf610_adc_feature adc_feature;
 169
 170         u32 sample_freq_avail[5];
 171
 172         struct completion completion;
 173         /* Ensure the timestamp is naturally aligned */
 174         struct {
 175                 u16 chan;
 176                 s64 timestamp __aligned(8);
 177         } scan;
 178 };
 179
 180 static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 };
 181 static const u32 vf610_lst_adder[] = { 3, 5, 7, 9, 13, 17, 21, 25 };
 182
 183 static inline void vf610_adc_calculate_rates(struct vf610_adc *info)
 184 {
 185         struct vf610_adc_feature *adc_feature = &info->adc_feature;
 186         unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk);
 187         u32 adck_period, lst_addr_min;
 188         int divisor, i;
 189
 190         adck_rate = info->max_adck_rate[adc_feature->conv_mode];
 191
 192         if (adck_rate) {
 193                 /* calculate clk divider which is within specification */
 194                 divisor = ipg_rate / adck_rate;
 195                 adc_feature->clk_div = 1 << fls(divisor + 1);
 196         } else {
 197                 /* fall-back value using a safe divisor */
 198                 adc_feature->clk_div = 8;
 199         }
 200
 201         adck_rate = ipg_rate / adc_feature->clk_div;
 202
 203         /*
 204          * Determine the long sample time adder value to be used based
 205          * on the default minimum sample time provided.
 206          */
 207         adck_period = NSEC_PER_SEC / adck_rate;
 208         lst_addr_min = adc_feature->default_sample_time / adck_period;
 209         for (i = 0; i < ARRAY_SIZE(vf610_lst_adder); i++) {
 210                 if (vf610_lst_adder[i] > lst_addr_min) {
 211                         adc_feature->lst_adder_index = i;
 212                         break;
 213                 }
 214         }
 215
 216         /*
 217          * Calculate ADC sample frequencies
 218          * Sample time unit is ADCK cycles. ADCK clk source is ipg clock,
 219          * which is the same as bus clock.
 220          *
 221          * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder)
 222          * SFCAdder: fixed to 6 ADCK cycles
 223          * AverageNum: 1, 4, 8, 16, 32 samples for hardware average.
 224          * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
 225          * LSTAdder(Long Sample Time): 3, 5, 7, 9, 13, 17, 21, 25 ADCK cycles
 226          */
 227         for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++)
 228                 info->sample_freq_avail[i] =
 229                         adck_rate / (6 + vf610_hw_avgs[i] *
 230                          (25 + vf610_lst_adder[adc_feature->lst_adder_index]));
 231 }
 232
 233 static inline void vf610_adc_cfg_init(struct vf610_adc *info)
 234 {
 235         struct vf610_adc_feature *adc_feature = &info->adc_feature;
 236
 237         /* set default Configuration for ADC controller */
 238         adc_feature->clk_sel = VF610_ADCIOC_BUSCLK_SET;
 239         adc_feature->vol_ref = VF610_ADCIOC_VR_VREF_SET;
 240
 241         adc_feature->calibration = true;
 242         adc_feature->ovwren = true;
 243
 244         adc_feature->res_mode = 12;
 245         adc_feature->sample_rate = 1;
 246
 247         adc_feature->conv_mode = VF610_ADC_CONV_LOW_POWER;
 248
 249         vf610_adc_calculate_rates(info);
 250 }
 251
 252 static void vf610_adc_cfg_post_set(struct vf610_adc *info)
 253 {
 254         struct vf610_adc_feature *adc_feature = &info->adc_feature;
 255         int cfg_data = 0;
 256         int gc_data = 0;
 257
 258         switch (adc_feature->clk_sel) {
 259         case VF610_ADCIOC_ALTCLK_SET:
 260                 cfg_data |= VF610_ADC_ALTCLK_SEL;
 261                 break;
 262         case VF610_ADCIOC_ADACK_SET:
 263                 cfg_data |= VF610_ADC_ADACK_SEL;
 264                 break;
 265         default:
 266                 break;
 267         }
 268
 269         /* low power set for calibration */
 270         cfg_data |= VF610_ADC_ADLPC_EN;
 271
 272         /* enable high speed for calibration */
 273         cfg_data |= VF610_ADC_ADHSC_EN;
 274
 275         /* voltage reference */
 276         switch (adc_feature->vol_ref) {
 277         case VF610_ADCIOC_VR_VREF_SET:
 278                 break;
 279         case VF610_ADCIOC_VR_VALT_SET:
 280                 cfg_data |= VF610_ADC_REFSEL_VALT;
 281                 break;
 282         case VF610_ADCIOC_VR_VBG_SET:
 283                 cfg_data |= VF610_ADC_REFSEL_VBG;
 284                 break;
 285         default:
 286                 dev_err(info->dev, "error voltage reference\n");
 287         }
 288
 289         /* data overwrite enable */
 290         if (adc_feature->ovwren)
 291                 cfg_data |= VF610_ADC_OVWREN;
 292
 293         writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
 294         writel(gc_data, info->regs + VF610_REG_ADC_GC);
 295 }
 296
 297 static void vf610_adc_calibration(struct vf610_adc *info)
 298 {
 299         int adc_gc, hc_cfg;
 300
 301         if (!info->adc_feature.calibration)
 302                 return;
 303
 304         /* enable calibration interrupt */
 305         hc_cfg = VF610_ADC_AIEN | VF610_ADC_CONV_DISABLE;
 306         writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
 307
 308         adc_gc = readl(info->regs + VF610_REG_ADC_GC);
 309         writel(adc_gc | VF610_ADC_CAL, info->regs + VF610_REG_ADC_GC);
 310
 311         if (!wait_for_completion_timeout(&info->completion, VF610_ADC_TIMEOUT))
 312                 dev_err(info->dev, "Timeout for adc calibration\n");
 313
 314         adc_gc = readl(info->regs + VF610_REG_ADC_GS);
 315         if (adc_gc & VF610_ADC_CALF)
 316                 dev_err(info->dev, "ADC calibration failed\n");
 317
 318         info->adc_feature.calibration = false;
 319 }
 320
 321 static void vf610_adc_cfg_set(struct vf610_adc *info)
 322 {
 323         struct vf610_adc_feature *adc_feature = &(info->adc_feature);
 324         int cfg_data;
 325
 326         cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
 327
 328         cfg_data &= ~VF610_ADC_ADLPC_EN;
 329         if (adc_feature->conv_mode == VF610_ADC_CONV_LOW_POWER)
 330                 cfg_data |= VF610_ADC_ADLPC_EN;
 331
 332         cfg_data &= ~VF610_ADC_ADHSC_EN;
 333         if (adc_feature->conv_mode == VF610_ADC_CONV_HIGH_SPEED)
 334                 cfg_data |= VF610_ADC_ADHSC_EN;
 335
 336         writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
 337 }
 338
 339 static void vf610_adc_sample_set(struct vf610_adc *info)
 340 {
 341         struct vf610_adc_feature *adc_feature = &(info->adc_feature);
 342         int cfg_data, gc_data;
 343
 344         cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
 345         gc_data = readl(info->regs + VF610_REG_ADC_GC);
 346
 347         /* resolution mode */
 348         cfg_data &= ~VF610_ADC_MODE_MASK;
 349         switch (adc_feature->res_mode) {
 350         case 8:
 351                 cfg_data |= VF610_ADC_MODE_BIT8;
 352                 break;
 353         case 10:
 354                 cfg_data |= VF610_ADC_MODE_BIT10;
 355                 break;
 356         case 12:
 357                 cfg_data |= VF610_ADC_MODE_BIT12;
 358                 break;
 359         default:
 360                 dev_err(info->dev, "error resolution mode\n");
 361                 break;
 362         }
 363
 364         /* clock select and clock divider */
 365         cfg_data &= ~(VF610_ADC_CLK_MASK | VF610_ADC_ADCCLK_MASK);
 366         switch (adc_feature->clk_div) {
 367         case 1:
 368                 break;
 369         case 2:
 370                 cfg_data |= VF610_ADC_CLK_DIV2;
 371                 break;
 372         case 4:
 373                 cfg_data |= VF610_ADC_CLK_DIV4;
 374                 break;
 375         case 8:
 376                 cfg_data |= VF610_ADC_CLK_DIV8;
 377                 break;
 378         case 16:
 379                 switch (adc_feature->clk_sel) {
 380                 case VF610_ADCIOC_BUSCLK_SET:
 381                         cfg_data |= VF610_ADC_BUSCLK2_SEL | VF610_ADC_CLK_DIV8;
 382                         break;
 383                 default:
 384                         dev_err(info->dev, "error clk divider\n");
 385                         break;
 386                 }
 387                 break;
 388         }
 389
 390         /*
 391          * Set ADLSMP and ADSTS based on the Long Sample Time Adder value
 392          * determined.
 393          */
 394         switch (adc_feature->lst_adder_index) {
 395         case VF610_ADCK_CYCLES_3:
 396                 break;
 397         case VF610_ADCK_CYCLES_5:
 398                 cfg_data |= VF610_ADC_ADSTS_SHORT;
 399                 break;
 400         case VF610_ADCK_CYCLES_7:
 401                 cfg_data |= VF610_ADC_ADSTS_NORMAL;
 402                 break;
 403         case VF610_ADCK_CYCLES_9:
 404                 cfg_data |= VF610_ADC_ADSTS_LONG;
 405                 break;
 406         case VF610_ADCK_CYCLES_13:
 407                 cfg_data |= VF610_ADC_ADLSMP_LONG;
 408                 break;
 409         case VF610_ADCK_CYCLES_17:
 410                 cfg_data |= VF610_ADC_ADLSMP_LONG;
 411                 cfg_data |= VF610_ADC_ADSTS_SHORT;
 412                 break;
 413         case VF610_ADCK_CYCLES_21:
 414                 cfg_data |= VF610_ADC_ADLSMP_LONG;
 415                 cfg_data |= VF610_ADC_ADSTS_NORMAL;
 416                 break;
 417         case VF610_ADCK_CYCLES_25:
 418                 cfg_data |= VF610_ADC_ADLSMP_LONG;
 419                 cfg_data |= VF610_ADC_ADSTS_NORMAL;
 420                 break;
 421         default:
 422                 dev_err(info->dev, "error in sample time select\n");
 423         }
 424
 425         /* update hardware average selection */
 426         cfg_data &= ~VF610_ADC_AVGS_MASK;
 427         gc_data &= ~VF610_ADC_AVGEN;
 428         switch (adc_feature->sample_rate) {
 429         case VF610_ADC_SAMPLE_1:
 430                 break;
 431         case VF610_ADC_SAMPLE_4:
 432                 gc_data |= VF610_ADC_AVGEN;
 433                 break;
 434         case VF610_ADC_SAMPLE_8:
 435                 gc_data |= VF610_ADC_AVGEN;
 436                 cfg_data |= VF610_ADC_AVGS_8;
 437                 break;
 438         case VF610_ADC_SAMPLE_16:
 439                 gc_data |= VF610_ADC_AVGEN;
 440                 cfg_data |= VF610_ADC_AVGS_16;
 441                 break;
 442         case VF610_ADC_SAMPLE_32:
 443                 gc_data |= VF610_ADC_AVGEN;
 444                 cfg_data |= VF610_ADC_AVGS_32;
 445                 break;
 446         default:
 447                 dev_err(info->dev,
 448                         "error hardware sample average select\n");
 449         }
 450
 451         writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
 452         writel(gc_data, info->regs + VF610_REG_ADC_GC);
 453 }
 454
 455 static void vf610_adc_hw_init(struct vf610_adc *info)
 456 {
 457         /* CFG: Feature set */
 458         vf610_adc_cfg_post_set(info);
 459         vf610_adc_sample_set(info);
 460
 461         /* adc calibration */
 462         vf610_adc_calibration(info);
 463
 464         /* CFG: power and speed set */
 465         vf610_adc_cfg_set(info);
 466 }
 467
 468 static int vf610_set_conversion_mode(struct iio_dev *indio_dev,
 469                                      const struct iio_chan_spec *chan,
 470                                      unsigned int mode)
 471 {
 472         struct vf610_adc *info = iio_priv(indio_dev);
 473
 474         mutex_lock(&info->lock);
 475         info->adc_feature.conv_mode = mode;
 476         vf610_adc_calculate_rates(info);
 477         vf610_adc_hw_init(info);
 478         mutex_unlock(&info->lock);
 479
 480         return 0;
 481 }
 482
 483 static int vf610_get_conversion_mode(struct iio_dev *indio_dev,
 484                                      const struct iio_chan_spec *chan)
 485 {
 486         struct vf610_adc *info = iio_priv(indio_dev);
 487
 488         return info->adc_feature.conv_mode;
 489 }
 490
 491 static const char * const vf610_conv_modes[] = { "normal", "high-speed",
 492                                                  "low-power" };
 493
 494 static const struct iio_enum vf610_conversion_mode = {
 495         .items = vf610_conv_modes,
 496         .num_items = ARRAY_SIZE(vf610_conv_modes),
 497         .get = vf610_get_conversion_mode,
 498         .set = vf610_set_conversion_mode,
 499 };
 500
 501 static const struct iio_chan_spec_ext_info vf610_ext_info[] = {
 502         IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR, &vf610_conversion_mode),
 503         {},
 504 };
 505
 506 #define VF610_ADC_CHAN(_idx, _chan_type) {                      \
 507         .type = (_chan_type),                                   \
 508         .indexed = 1,                                           \
 509         .channel = (_idx),                                      \
 510         .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),           \
 511         .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |  \
 512                                 BIT(IIO_CHAN_INFO_SAMP_FREQ),   \
 513         .ext_info = vf610_ext_info,                             \
 514         .scan_index = (_idx),                   \
 515         .scan_type = {                                  \
 516                 .sign = 'u',                            \
 517                 .realbits = 12,                         \
 518                 .storagebits = 16,                      \
 519         },                                              \
 520 }
 521
 522 #define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) {  \
 523         .type = (_chan_type),   \
 524         .channel = (_idx),              \
 525         .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),     \
 526         .scan_index = (_idx),                                   \
 527         .scan_type = {                                          \
 528                 .sign = 'u',                                    \
 529                 .realbits = 12,                                 \
 530                 .storagebits = 16,                              \
 531         },                                                      \
 532 }
 533
 534 static const struct iio_chan_spec vf610_adc_iio_channels[] = {
 535         VF610_ADC_CHAN(0, IIO_VOLTAGE),
 536         VF610_ADC_CHAN(1, IIO_VOLTAGE),
 537         VF610_ADC_CHAN(2, IIO_VOLTAGE),
 538         VF610_ADC_CHAN(3, IIO_VOLTAGE),
 539         VF610_ADC_CHAN(4, IIO_VOLTAGE),
 540         VF610_ADC_CHAN(5, IIO_VOLTAGE),
 541         VF610_ADC_CHAN(6, IIO_VOLTAGE),
 542         VF610_ADC_CHAN(7, IIO_VOLTAGE),
 543         VF610_ADC_CHAN(8, IIO_VOLTAGE),
 544         VF610_ADC_CHAN(9, IIO_VOLTAGE),
 545         VF610_ADC_CHAN(10, IIO_VOLTAGE),
 546         VF610_ADC_CHAN(11, IIO_VOLTAGE),
 547         VF610_ADC_CHAN(12, IIO_VOLTAGE),
 548         VF610_ADC_CHAN(13, IIO_VOLTAGE),
 549         VF610_ADC_CHAN(14, IIO_VOLTAGE),
 550         VF610_ADC_CHAN(15, IIO_VOLTAGE),
 551         VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP),
 552         IIO_CHAN_SOFT_TIMESTAMP(32),
 553         /* sentinel */
 554 };
 555
 556 static int vf610_adc_read_data(struct vf610_adc *info)
 557 {
 558         int result;
 559
 560         result = readl(info->regs + VF610_REG_ADC_R0);
 561
 562         switch (info->adc_feature.res_mode) {
 563         case 8:
 564                 result &= 0xFF;
 565                 break;
 566         case 10:
 567                 result &= 0x3FF;
 568                 break;
 569         case 12:
 570                 result &= 0xFFF;
 571                 break;
 572         default:
 573                 break;
 574         }
 575
 576         return result;
 577 }
 578
 579 static irqreturn_t vf610_adc_isr(int irq, void *dev_id)
 580 {
 581         struct iio_dev *indio_dev = dev_id;
 582         struct vf610_adc *info = iio_priv(indio_dev);
 583         int coco;
 584
 585         coco = readl(info->regs + VF610_REG_ADC_HS);
 586         if (coco & VF610_ADC_HS_COCO0) {
 587                 info->value = vf610_adc_read_data(info);
 588                 if (iio_buffer_enabled(indio_dev)) {
 589                         info->scan.chan = info->value;
 590                         iio_push_to_buffers_with_timestamp(indio_dev,
 591                                         &info->scan,
 592                                         iio_get_time_ns(indio_dev));
 593                         iio_trigger_notify_done(indio_dev->trig);
 594                 } else
 595                         complete(&info->completion);
 596         }
 597
 598         return IRQ_HANDLED;
 599 }
 600
 601 static ssize_t vf610_show_samp_freq_avail(struct device *dev,
 602                                 struct device_attribute *attr, char *buf)
 603 {
 604         struct vf610_adc *info = iio_priv(dev_to_iio_dev(dev));
 605         size_t len = 0;
 606         int i;
 607
 608         for (i = 0; i < ARRAY_SIZE(info->sample_freq_avail); i++)
 609                 len += scnprintf(buf + len, PAGE_SIZE - len,
 610                         "%u ", info->sample_freq_avail[i]);
 611
 612         /* replace trailing space by newline */
 613         buf[len - 1] = '\n';
 614
 615         return len;
 616 }
 617
 618 static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(vf610_show_samp_freq_avail);
 619
 620 static struct attribute *vf610_attributes[] = {
 621         &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 622         NULL
 623 };
 624
 625 static const struct attribute_group vf610_attribute_group = {
 626         .attrs = vf610_attributes,
 627 };
 628
 629 static int vf610_read_sample(struct iio_dev *indio_dev,
 630                              struct iio_chan_spec const *chan, int *val)
 631 {
 632         struct vf610_adc *info = iio_priv(indio_dev);
 633         unsigned int hc_cfg;
 634         int ret;
 635
 636         ret = iio_device_claim_direct_mode(indio_dev);
 637         if (ret)
 638                 return ret;
 639
 640         mutex_lock(&info->lock);
 641         reinit_completion(&info->completion);
 642         hc_cfg = VF610_ADC_ADCHC(chan->channel);
 643         hc_cfg |= VF610_ADC_AIEN;
 644         writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
 645         ret = wait_for_completion_interruptible_timeout(&info->completion,
 646                                                         VF610_ADC_TIMEOUT);
 647         if (ret == 0) {
 648                 ret = -ETIMEDOUT;
 649                 goto out_unlock;
 650         }
 651
 652         if (ret < 0)
 653                 goto out_unlock;
 654
 655         switch (chan->type) {
 656         case IIO_VOLTAGE:
 657                 *val = info->value;
 658                 break;
 659         case IIO_TEMP:
 660                 /*
 661                  * Calculate in degree Celsius times 1000
 662                  * Using the typical sensor slope of 1.84 mV/°C
 663                  * and VREFH_ADC at 3.3V, V at 25°C of 699 mV
 664                  */
 665                 *val = 25000 - ((int)info->value - VF610_VTEMP25_3V3) *
 666                                 1000000 / VF610_TEMP_SLOPE_COEFF;
 667
 668                 break;
 669         default:
 670                 ret = -EINVAL;
 671                 break;
 672         }
 673
 674 out_unlock:
 675         mutex_unlock(&info->lock);
 676         iio_device_release_direct_mode(indio_dev);
 677
 678         return ret;
 679 }
 680
 681 static int vf610_read_raw(struct iio_dev *indio_dev,
 682                         struct iio_chan_spec const *chan,
 683                         int *val,
 684                         int *val2,
 685                         long mask)
 686 {
 687         struct vf610_adc *info = iio_priv(indio_dev);
 688         long ret;
 689
 690         switch (mask) {
 691         case IIO_CHAN_INFO_RAW:
 692         case IIO_CHAN_INFO_PROCESSED:
 693                 ret = vf610_read_sample(indio_dev, chan, val);
 694                 if (ret < 0)
 695                         return ret;
 696
 697                 return IIO_VAL_INT;
 698
 699         case IIO_CHAN_INFO_SCALE:
 700                 *val = info->vref_uv / 1000;
 701                 *val2 = info->adc_feature.res_mode;
 702                 return IIO_VAL_FRACTIONAL_LOG2;
 703
 704         case IIO_CHAN_INFO_SAMP_FREQ:
 705                 *val = info->sample_freq_avail[info->adc_feature.sample_rate];
 706                 *val2 = 0;
 707                 return IIO_VAL_INT;
 708
 709         default:
 710                 break;
 711         }
 712
 713         return -EINVAL;
 714 }
 715
 716 static int vf610_write_raw(struct iio_dev *indio_dev,
 717                         struct iio_chan_spec const *chan,
 718                         int val,
 719                         int val2,
 720                         long mask)
 721 {
 722         struct vf610_adc *info = iio_priv(indio_dev);
 723         int i;
 724
 725         switch (mask) {
 726         case IIO_CHAN_INFO_SAMP_FREQ:
 727                 for (i = 0;
 728                         i < ARRAY_SIZE(info->sample_freq_avail);
 729                         i++)
 730                         if (val == info->sample_freq_avail[i]) {
 731                                 info->adc_feature.sample_rate = i;
 732                                 vf610_adc_sample_set(info);
 733                                 return 0;
 734                         }
 735                 break;
 736
 737         default:
 738                 break;
 739         }
 740
 741         return -EINVAL;
 742 }
 743
 744 static int vf610_adc_buffer_postenable(struct iio_dev *indio_dev)
 745 {
 746         struct vf610_adc *info = iio_priv(indio_dev);
 747         unsigned int channel;
 748         int val;
 749
 750         val = readl(info->regs + VF610_REG_ADC_GC);
 751         val |= VF610_ADC_ADCON;
 752         writel(val, info->regs + VF610_REG_ADC_GC);
 753
 754         channel = find_first_bit(indio_dev->active_scan_mask,
 755                                                 indio_dev->masklength);
 756
 757         val = VF610_ADC_ADCHC(channel);
 758         val |= VF610_ADC_AIEN;
 759
 760         writel(val, info->regs + VF610_REG_ADC_HC0);
 761
 762         return 0;
 763 }
 764
 765 static int vf610_adc_buffer_predisable(struct iio_dev *indio_dev)
 766 {
 767         struct vf610_adc *info = iio_priv(indio_dev);
 768         unsigned int hc_cfg = 0;
 769         int val;
 770
 771         val = readl(info->regs + VF610_REG_ADC_GC);
 772         val &= ~VF610_ADC_ADCON;
 773         writel(val, info->regs + VF610_REG_ADC_GC);
 774
 775         hc_cfg |= VF610_ADC_CONV_DISABLE;
 776         hc_cfg &= ~VF610_ADC_AIEN;
 777
 778         writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
 779
 780         return 0;
 781 }
 782
 783 static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = {
 784         .postenable = &vf610_adc_buffer_postenable,
 785         .predisable = &vf610_adc_buffer_predisable,
 786         .validate_scan_mask = &iio_validate_scan_mask_onehot,
 787 };
 788
 789 static int vf610_adc_reg_access(struct iio_dev *indio_dev,
 790                         unsigned reg, unsigned writeval,
 791                         unsigned *readval)
 792 {
 793         struct vf610_adc *info = iio_priv(indio_dev);
 794
 795         if ((readval == NULL) ||
 796                 ((reg % 4) || (reg > VF610_REG_ADC_PCTL)))
 797                 return -EINVAL;
 798
 799         *readval = readl(info->regs + reg);
 800
 801         return 0;
 802 }
 803
 804 static const struct iio_info vf610_adc_iio_info = {
 805         .read_raw = &vf610_read_raw,
 806         .write_raw = &vf610_write_raw,
 807         .debugfs_reg_access = &vf610_adc_reg_access,
 808         .attrs = &vf610_attribute_group,
 809 };
 810
 811 static const struct of_device_id vf610_adc_match[] = {
 812         { .compatible = "fsl,vf610-adc", },
 813         { /* sentinel */ }
 814 };
 815 MODULE_DEVICE_TABLE(of, vf610_adc_match);
 816
 817 static int vf610_adc_probe(struct platform_device *pdev)
 818 {
 819         struct device *dev = &pdev->dev;
 820         struct vf610_adc *info;
 821         struct iio_dev *indio_dev;
 822         int irq;
 823         int ret;
 824
 825         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct vf610_adc));
 826         if (!indio_dev) {
 827                 dev_err(&pdev->dev, "Failed allocating iio device\n");
 828                 return -ENOMEM;
 829         }
 830
 831         info = iio_priv(indio_dev);
 832         info->dev = &pdev->dev;
 833
 834         info->regs = devm_platform_ioremap_resource(pdev, 0);
 835         if (IS_ERR(info->regs))
 836                 return PTR_ERR(info->regs);
 837
 838         irq = platform_get_irq(pdev, 0);
 839         if (irq < 0)
 840                 return irq;
 841
 842         ret = devm_request_irq(info->dev, irq,
 843                                 vf610_adc_isr, 0,
 844                                 dev_name(&pdev->dev), indio_dev);
 845         if (ret < 0) {
 846                 dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", irq);
 847                 return ret;
 848         }
 849
 850         info->clk = devm_clk_get(&pdev->dev, "adc");
 851         if (IS_ERR(info->clk)) {
 852                 dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
 853                                                 PTR_ERR(info->clk));
 854                 return PTR_ERR(info->clk);
 855         }
 856
 857         info->vref = devm_regulator_get(&pdev->dev, "vref");
 858         if (IS_ERR(info->vref))
 859                 return PTR_ERR(info->vref);
 860
 861         ret = regulator_enable(info->vref);
 862         if (ret)
 863                 return ret;
 864
 865         info->vref_uv = regulator_get_voltage(info->vref);
 866
 867         device_property_read_u32_array(dev, "fsl,adck-max-frequency", info->max_adck_rate, 3);
 868
 869         info->adc_feature.default_sample_time = DEFAULT_SAMPLE_TIME;
 870         device_property_read_u32(dev, "min-sample-time", &info->adc_feature.default_sample_time);
 871
 872         platform_set_drvdata(pdev, indio_dev);
 873
 874         init_completion(&info->completion);
 875
 876         indio_dev->name = dev_name(&pdev->dev);
 877         indio_dev->info = &vf610_adc_iio_info;
 878         indio_dev->modes = INDIO_DIRECT_MODE;
 879         indio_dev->channels = vf610_adc_iio_channels;
 880         indio_dev->num_channels = ARRAY_SIZE(vf610_adc_iio_channels);
 881
 882         ret = clk_prepare_enable(info->clk);
 883         if (ret) {
 884                 dev_err(&pdev->dev,
 885                         "Could not prepare or enable the clock.\n");
 886                 goto error_adc_clk_enable;
 887         }
 888
 889         vf610_adc_cfg_init(info);
 890         vf610_adc_hw_init(info);
 891
 892         ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
 893                                         NULL, &iio_triggered_buffer_setup_ops);
 894         if (ret < 0) {
 895                 dev_err(&pdev->dev, "Couldn't initialise the buffer\n");
 896                 goto error_iio_device_register;
 897         }
 898
 899         mutex_init(&info->lock);
 900
 901         ret = iio_device_register(indio_dev);
 902         if (ret) {
 903                 dev_err(&pdev->dev, "Couldn't register the device.\n");
 904                 goto error_adc_buffer_init;
 905         }
 906
 907         return 0;
 908
 909 error_adc_buffer_init:
 910         iio_triggered_buffer_cleanup(indio_dev);
 911 error_iio_device_register:
 912         clk_disable_unprepare(info->clk);
 913 error_adc_clk_enable:
 914         regulator_disable(info->vref);
 915
 916         return ret;
 917 }
 918
 919 static void vf610_adc_remove(struct platform_device *pdev)
 920 {
 921         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 922         struct vf610_adc *info = iio_priv(indio_dev);
 923
 924         iio_device_unregister(indio_dev);
 925         iio_triggered_buffer_cleanup(indio_dev);
 926         regulator_disable(info->vref);
 927         clk_disable_unprepare(info->clk);
 928 }
 929
 930 static int vf610_adc_suspend(struct device *dev)
 931 {
 932         struct iio_dev *indio_dev = dev_get_drvdata(dev);
 933         struct vf610_adc *info = iio_priv(indio_dev);
 934         int hc_cfg;
 935
 936         /* ADC controller enters to stop mode */
 937         hc_cfg = readl(info->regs + VF610_REG_ADC_HC0);
 938         hc_cfg |= VF610_ADC_CONV_DISABLE;
 939         writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
 940
 941         clk_disable_unprepare(info->clk);
 942         regulator_disable(info->vref);
 943
 944         return 0;
 945 }
 946
 947 static int vf610_adc_resume(struct device *dev)
 948 {
 949         struct iio_dev *indio_dev = dev_get_drvdata(dev);
 950         struct vf610_adc *info = iio_priv(indio_dev);
 951         int ret;
 952
 953         ret = regulator_enable(info->vref);
 954         if (ret)
 955                 return ret;
 956
 957         ret = clk_prepare_enable(info->clk);
 958         if (ret)
 959                 goto disable_reg;
 960
 961         vf610_adc_hw_init(info);
 962
 963         return 0;
 964
 965 disable_reg:
 966         regulator_disable(info->vref);
 967         return ret;
 968 }
 969
 970 static DEFINE_SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops, vf610_adc_suspend,
 971                                 vf610_adc_resume);
 972
 973 static struct platform_driver vf610_adc_driver = {
 974         .probe          = vf610_adc_probe,
 975         .remove_new     = vf610_adc_remove,
 976         .driver         = {
 977                 .name   = DRIVER_NAME,
 978                 .of_match_table = vf610_adc_match,
 979                 .pm     = pm_sleep_ptr(&vf610_adc_pm_ops),
 980         },
 981 };
 982
 983 module_platform_driver(vf610_adc_driver);
 984
 985 MODULE_AUTHOR("Fugang Duan <B38611@freescale.com>");
 986 MODULE_DESCRIPTION("Freescale VF610 ADC driver");
 987 MODULE_LICENSE("GPL v2");