drivers/iio/adc/spear_adc.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * ST SPEAr ADC driver
   4  *
   5  * Copyright 2012 Stefan Roese <sr@denx.de>
   6  */
   7
   8 #include <linux/module.h>
   9 #include <linux/platform_device.h>
  10 #include <linux/interrupt.h>
  11 #include <linux/device.h>
  12 #include <linux/kernel.h>
  13 #include <linux/slab.h>
  14 #include <linux/io.h>
  15 #include <linux/clk.h>
  16 #include <linux/err.h>
  17 #include <linux/completion.h>
  18 #include <linux/of.h>
  19 #include <linux/of_address.h>
  20
  21 #include <linux/iio/iio.h>
  22 #include <linux/iio/sysfs.h>
  23
  24 /* SPEAR registers definitions */
  25 #define SPEAR600_ADC_SCAN_RATE_LO(x)    ((x) & 0xFFFF)
  26 #define SPEAR600_ADC_SCAN_RATE_HI(x)    (((x) >> 0x10) & 0xFFFF)
  27 #define SPEAR_ADC_CLK_LOW(x)            (((x) & 0xf) << 0)
  28 #define SPEAR_ADC_CLK_HIGH(x)           (((x) & 0xf) << 4)
  29
  30 /* Bit definitions for SPEAR_ADC_STATUS */
  31 #define SPEAR_ADC_STATUS_START_CONVERSION       BIT(0)
  32 #define SPEAR_ADC_STATUS_CHANNEL_NUM(x)         ((x) << 1)
  33 #define SPEAR_ADC_STATUS_ADC_ENABLE             BIT(4)
  34 #define SPEAR_ADC_STATUS_AVG_SAMPLE(x)          ((x) << 5)
  35 #define SPEAR_ADC_STATUS_VREF_INTERNAL          BIT(9)
  36
  37 #define SPEAR_ADC_DATA_MASK             0x03ff
  38 #define SPEAR_ADC_DATA_BITS             10
  39
  40 #define SPEAR_ADC_MOD_NAME "spear-adc"
  41
  42 #define SPEAR_ADC_CHANNEL_NUM           8
  43
  44 #define SPEAR_ADC_CLK_MIN                       2500000
  45 #define SPEAR_ADC_CLK_MAX                       20000000
  46
  47 struct adc_regs_spear3xx {
  48         u32 status;
  49         u32 average;
  50         u32 scan_rate;
  51         u32 clk;        /* Not avail for 1340 & 1310 */
  52         u32 ch_ctrl[SPEAR_ADC_CHANNEL_NUM];
  53         u32 ch_data[SPEAR_ADC_CHANNEL_NUM];
  54 };
  55
  56 struct chan_data {
  57         u32 lsb;
  58         u32 msb;
  59 };
  60
  61 struct adc_regs_spear6xx {
  62         u32 status;
  63         u32 pad[2];
  64         u32 clk;
  65         u32 ch_ctrl[SPEAR_ADC_CHANNEL_NUM];
  66         struct chan_data ch_data[SPEAR_ADC_CHANNEL_NUM];
  67         u32 scan_rate_lo;
  68         u32 scan_rate_hi;
  69         struct chan_data average;
  70 };
  71
  72 struct spear_adc_state {
  73         struct device_node *np;
  74         struct adc_regs_spear3xx __iomem *adc_base_spear3xx;
  75         struct adc_regs_spear6xx __iomem *adc_base_spear6xx;
  76         struct clk *clk;
  77         struct completion completion;
  78         /*
  79          * Lock to protect the device state during a potential concurrent
  80          * read access from userspace. Reading a raw value requires a sequence
  81          * of register writes, then a wait for a completion callback,
  82          * and finally a register read, during which userspace could issue
  83          * another read request. This lock protects a read access from
  84          * ocurring before another one has finished.
  85          */
  86         struct mutex lock;
  87         u32 current_clk;
  88         u32 sampling_freq;
  89         u32 avg_samples;
  90         u32 vref_external;
  91         u32 value;
  92 };
  93
  94 /*
  95  * Functions to access some SPEAr ADC register. Abstracted into
  96  * static inline functions, because of different register offsets
  97  * on different SoC variants (SPEAr300 vs SPEAr600 etc).
  98  */
  99 static void spear_adc_set_status(struct spear_adc_state *st, u32 val)
 100 {
 101         __raw_writel(val, &st->adc_base_spear6xx->status);
 102 }
 103
 104 static void spear_adc_set_clk(struct spear_adc_state *st, u32 val)
 105 {
 106         u32 clk_high, clk_low, count;
 107         u32 apb_clk = clk_get_rate(st->clk);
 108
 109         count = DIV_ROUND_UP(apb_clk, val);
 110         clk_low = count / 2;
 111         clk_high = count - clk_low;
 112         st->current_clk = apb_clk / count;
 113
 114         __raw_writel(SPEAR_ADC_CLK_LOW(clk_low) | SPEAR_ADC_CLK_HIGH(clk_high),
 115                      &st->adc_base_spear6xx->clk);
 116 }
 117
 118 static void spear_adc_set_ctrl(struct spear_adc_state *st, int n,
 119                                u32 val)
 120 {
 121         __raw_writel(val, &st->adc_base_spear6xx->ch_ctrl[n]);
 122 }
 123
 124 static u32 spear_adc_get_average(struct spear_adc_state *st)
 125 {
 126         if (of_device_is_compatible(st->np, "st,spear600-adc")) {
 127                 return __raw_readl(&st->adc_base_spear6xx->average.msb) &
 128                         SPEAR_ADC_DATA_MASK;
 129         } else {
 130                 return __raw_readl(&st->adc_base_spear3xx->average) &
 131                         SPEAR_ADC_DATA_MASK;
 132         }
 133 }
 134
 135 static void spear_adc_set_scanrate(struct spear_adc_state *st, u32 rate)
 136 {
 137         if (of_device_is_compatible(st->np, "st,spear600-adc")) {
 138                 __raw_writel(SPEAR600_ADC_SCAN_RATE_LO(rate),
 139                              &st->adc_base_spear6xx->scan_rate_lo);
 140                 __raw_writel(SPEAR600_ADC_SCAN_RATE_HI(rate),
 141                              &st->adc_base_spear6xx->scan_rate_hi);
 142         } else {
 143                 __raw_writel(rate, &st->adc_base_spear3xx->scan_rate);
 144         }
 145 }
 146
 147 static int spear_adc_read_raw(struct iio_dev *indio_dev,
 148                               struct iio_chan_spec const *chan,
 149                               int *val,
 150                               int *val2,
 151                               long mask)
 152 {
 153         struct spear_adc_state *st = iio_priv(indio_dev);
 154         u32 status;
 155
 156         switch (mask) {
 157         case IIO_CHAN_INFO_RAW:
 158                 mutex_lock(&st->lock);
 159
 160                 status = SPEAR_ADC_STATUS_CHANNEL_NUM(chan->channel) |
 161                         SPEAR_ADC_STATUS_AVG_SAMPLE(st->avg_samples) |
 162                         SPEAR_ADC_STATUS_START_CONVERSION |
 163                         SPEAR_ADC_STATUS_ADC_ENABLE;
 164                 if (st->vref_external == 0)
 165                         status |= SPEAR_ADC_STATUS_VREF_INTERNAL;
 166
 167                 spear_adc_set_status(st, status);
 168                 wait_for_completion(&st->completion); /* set by ISR */
 169                 *val = st->value;
 170
 171                 mutex_unlock(&st->lock);
 172
 173                 return IIO_VAL_INT;
 174
 175         case IIO_CHAN_INFO_SCALE:
 176                 *val = st->vref_external;
 177                 *val2 = SPEAR_ADC_DATA_BITS;
 178                 return IIO_VAL_FRACTIONAL_LOG2;
 179         case IIO_CHAN_INFO_SAMP_FREQ:
 180                 *val = st->current_clk;
 181                 return IIO_VAL_INT;
 182         }
 183
 184         return -EINVAL;
 185 }
 186
 187 static int spear_adc_write_raw(struct iio_dev *indio_dev,
 188                                struct iio_chan_spec const *chan,
 189                                int val,
 190                                int val2,
 191                                long mask)
 192 {
 193         struct spear_adc_state *st = iio_priv(indio_dev);
 194         int ret = 0;
 195
 196         if (mask != IIO_CHAN_INFO_SAMP_FREQ)
 197                 return -EINVAL;
 198
 199         mutex_lock(&st->lock);
 200
 201         if ((val < SPEAR_ADC_CLK_MIN) ||
 202             (val > SPEAR_ADC_CLK_MAX) ||
 203             (val2 != 0)) {
 204                 ret = -EINVAL;
 205                 goto out;
 206         }
 207
 208         spear_adc_set_clk(st, val);
 209
 210 out:
 211         mutex_unlock(&st->lock);
 212         return ret;
 213 }
 214
 215 #define SPEAR_ADC_CHAN(idx) {                           \
 216         .type = IIO_VOLTAGE,                            \
 217         .indexed = 1,                                   \
 218         .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),   \
 219         .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),   \
 220         .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
 221         .channel = idx,                                 \
 222 }
 223
 224 static const struct iio_chan_spec spear_adc_iio_channels[] = {
 225         SPEAR_ADC_CHAN(0),
 226         SPEAR_ADC_CHAN(1),
 227         SPEAR_ADC_CHAN(2),
 228         SPEAR_ADC_CHAN(3),
 229         SPEAR_ADC_CHAN(4),
 230         SPEAR_ADC_CHAN(5),
 231         SPEAR_ADC_CHAN(6),
 232         SPEAR_ADC_CHAN(7),
 233 };
 234
 235 static irqreturn_t spear_adc_isr(int irq, void *dev_id)
 236 {
 237         struct spear_adc_state *st = dev_id;
 238
 239         /* Read value to clear IRQ */
 240         st->value = spear_adc_get_average(st);
 241         complete(&st->completion);
 242
 243         return IRQ_HANDLED;
 244 }
 245
 246 static int spear_adc_configure(struct spear_adc_state *st)
 247 {
 248         int i;
 249
 250         /* Reset ADC core */
 251         spear_adc_set_status(st, 0);
 252         __raw_writel(0, &st->adc_base_spear6xx->clk);
 253         for (i = 0; i < 8; i++)
 254                 spear_adc_set_ctrl(st, i, 0);
 255         spear_adc_set_scanrate(st, 0);
 256
 257         spear_adc_set_clk(st, st->sampling_freq);
 258
 259         return 0;
 260 }
 261
 262 static const struct iio_info spear_adc_info = {
 263         .read_raw = &spear_adc_read_raw,
 264         .write_raw = &spear_adc_write_raw,
 265 };
 266
 267 static int spear_adc_probe(struct platform_device *pdev)
 268 {
 269         struct device_node *np = pdev->dev.of_node;
 270         struct device *dev = &pdev->dev;
 271         struct spear_adc_state *st;
 272         struct iio_dev *indio_dev = NULL;
 273         int ret = -ENODEV;
 274         int irq;
 275
 276         indio_dev = devm_iio_device_alloc(dev, sizeof(struct spear_adc_state));
 277         if (!indio_dev)
 278                 return dev_err_probe(dev, -ENOMEM,
 279                                      "failed allocating iio device\n");
 280
 281         st = iio_priv(indio_dev);
 282
 283         mutex_init(&st->lock);
 284
 285         st->np = np;
 286
 287         /*
 288          * SPEAr600 has a different register layout than other SPEAr SoC's
 289          * (e.g. SPEAr3xx). Let's provide two register base addresses
 290          * to support multi-arch kernels.
 291          */
 292         st->adc_base_spear6xx = devm_platform_ioremap_resource(pdev, 0);
 293         if (IS_ERR(st->adc_base_spear6xx))
 294                 return PTR_ERR(st->adc_base_spear6xx);
 295
 296         st->adc_base_spear3xx =
 297                 (struct adc_regs_spear3xx __iomem *)st->adc_base_spear6xx;
 298
 299         st->clk = devm_clk_get_enabled(dev, NULL);
 300         if (IS_ERR(st->clk))
 301                 return dev_err_probe(dev, PTR_ERR(st->clk),
 302                                      "failed enabling clock\n");
 303
 304         irq = platform_get_irq(pdev, 0);
 305         if (irq < 0)
 306                 return irq;
 307
 308         ret = devm_request_irq(dev, irq, spear_adc_isr, 0, SPEAR_ADC_MOD_NAME,
 309                                st);
 310         if (ret < 0)
 311                 return dev_err_probe(dev, ret, "failed requesting interrupt\n");
 312
 313         if (of_property_read_u32(np, "sampling-frequency",
 314                                  &st->sampling_freq))
 315                 return dev_err_probe(dev, -EINVAL,
 316                                      "sampling-frequency missing in DT\n");
 317
 318         /*
 319          * Optional avg_samples defaults to 0, resulting in single data
 320          * conversion
 321          */
 322         of_property_read_u32(np, "average-samples", &st->avg_samples);
 323
 324         /*
 325          * Optional vref_external defaults to 0, resulting in internal vref
 326          * selection
 327          */
 328         of_property_read_u32(np, "vref-external", &st->vref_external);
 329
 330         spear_adc_configure(st);
 331
 332         init_completion(&st->completion);
 333
 334         indio_dev->name = SPEAR_ADC_MOD_NAME;
 335         indio_dev->info = &spear_adc_info;
 336         indio_dev->modes = INDIO_DIRECT_MODE;
 337         indio_dev->channels = spear_adc_iio_channels;
 338         indio_dev->num_channels = ARRAY_SIZE(spear_adc_iio_channels);
 339
 340         ret = devm_iio_device_register(dev, indio_dev);
 341         if (ret)
 342                 return ret;
 343
 344         dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq);
 345
 346         return 0;
 347 }
 348
 349 #ifdef CONFIG_OF
 350 static const struct of_device_id spear_adc_dt_ids[] = {
 351         { .compatible = "st,spear600-adc", },
 352         { /* sentinel */ }
 353 };
 354 MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
 355 #endif
 356
 357 static struct platform_driver spear_adc_driver = {
 358         .probe          = spear_adc_probe,
 359         .driver         = {
 360                 .name   = SPEAR_ADC_MOD_NAME,
 361                 .of_match_table = of_match_ptr(spear_adc_dt_ids),
 362         },
 363 };
 364
 365 module_platform_driver(spear_adc_driver);
 366
 367 MODULE_AUTHOR("Stefan Roese <sr@denx.de>");
 368 MODULE_DESCRIPTION("SPEAr ADC driver");
 369 MODULE_LICENSE("GPL");