GNU Linux-libre 4.9.322-gnu1
[releases.git] / drivers / iio / adc / exynos_adc.c
1 /*
2  *  exynos_adc.c - Support for ADC in EXYNOS SoCs
3  *
4  *  8 ~ 10 channel, 10/12-bit ADC
5  *
6  *  Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com>
7  *
8  *  This program is free software; you can redistribute it and/or modify
9  *  it under the terms of the GNU General Public License as published by
10  *  the Free Software Foundation; either version 2 of the License, or
11  *  (at your option) any later version.
12  *
13  *  This program is distributed in the hope that it will be useful,
14  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
15  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  *  GNU General Public License for more details.
17  *
18  *  You should have received a copy of the GNU General Public License
19  *  along with this program; if not, write to the Free Software
20  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21  */
22
23 #include <linux/module.h>
24 #include <linux/platform_device.h>
25 #include <linux/interrupt.h>
26 #include <linux/delay.h>
27 #include <linux/errno.h>
28 #include <linux/kernel.h>
29 #include <linux/slab.h>
30 #include <linux/io.h>
31 #include <linux/clk.h>
32 #include <linux/completion.h>
33 #include <linux/of.h>
34 #include <linux/of_irq.h>
35 #include <linux/regulator/consumer.h>
36 #include <linux/of_platform.h>
37 #include <linux/err.h>
38 #include <linux/input.h>
39
40 #include <linux/iio/iio.h>
41 #include <linux/iio/machine.h>
42 #include <linux/iio/driver.h>
43 #include <linux/mfd/syscon.h>
44 #include <linux/regmap.h>
45
46 #include <linux/platform_data/touchscreen-s3c2410.h>
47
48 /* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
49 #define ADC_V1_CON(x)           ((x) + 0x00)
50 #define ADC_V1_TSC(x)           ((x) + 0x04)
51 #define ADC_V1_DLY(x)           ((x) + 0x08)
52 #define ADC_V1_DATX(x)          ((x) + 0x0C)
53 #define ADC_V1_DATY(x)          ((x) + 0x10)
54 #define ADC_V1_UPDN(x)          ((x) + 0x14)
55 #define ADC_V1_INTCLR(x)        ((x) + 0x18)
56 #define ADC_V1_MUX(x)           ((x) + 0x1c)
57 #define ADC_V1_CLRINTPNDNUP(x)  ((x) + 0x20)
58
59 /* S3C2410 ADC registers definitions */
60 #define ADC_S3C2410_MUX(x)      ((x) + 0x18)
61
62 /* Future ADC_V2 registers definitions */
63 #define ADC_V2_CON1(x)          ((x) + 0x00)
64 #define ADC_V2_CON2(x)          ((x) + 0x04)
65 #define ADC_V2_STAT(x)          ((x) + 0x08)
66 #define ADC_V2_INT_EN(x)        ((x) + 0x10)
67 #define ADC_V2_INT_ST(x)        ((x) + 0x14)
68 #define ADC_V2_VER(x)           ((x) + 0x20)
69
70 /* Bit definitions for ADC_V1 */
71 #define ADC_V1_CON_RES          (1u << 16)
72 #define ADC_V1_CON_PRSCEN       (1u << 14)
73 #define ADC_V1_CON_PRSCLV(x)    (((x) & 0xFF) << 6)
74 #define ADC_V1_CON_STANDBY      (1u << 2)
75
76 /* Bit definitions for S3C2410 ADC */
77 #define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3)
78 #define ADC_S3C2410_DATX_MASK   0x3FF
79 #define ADC_S3C2416_CON_RES_SEL (1u << 3)
80
81 /* touch screen always uses channel 0 */
82 #define ADC_S3C2410_MUX_TS      0
83
84 /* ADCTSC Register Bits */
85 #define ADC_S3C2443_TSC_UD_SEN          (1u << 8)
86 #define ADC_S3C2410_TSC_YM_SEN          (1u << 7)
87 #define ADC_S3C2410_TSC_YP_SEN          (1u << 6)
88 #define ADC_S3C2410_TSC_XM_SEN          (1u << 5)
89 #define ADC_S3C2410_TSC_XP_SEN          (1u << 4)
90 #define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3)
91 #define ADC_S3C2410_TSC_AUTO_PST        (1u << 2)
92 #define ADC_S3C2410_TSC_XY_PST(x)       (((x) & 0x3) << 0)
93
94 #define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \
95                          ADC_S3C2410_TSC_YP_SEN | \
96                          ADC_S3C2410_TSC_XP_SEN | \
97                          ADC_S3C2410_TSC_XY_PST(3))
98
99 #define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \
100                          ADC_S3C2410_TSC_YP_SEN | \
101                          ADC_S3C2410_TSC_XP_SEN | \
102                          ADC_S3C2410_TSC_AUTO_PST | \
103                          ADC_S3C2410_TSC_XY_PST(0))
104
105 /* Bit definitions for ADC_V2 */
106 #define ADC_V2_CON1_SOFT_RESET  (1u << 2)
107
108 #define ADC_V2_CON2_OSEL        (1u << 10)
109 #define ADC_V2_CON2_ESEL        (1u << 9)
110 #define ADC_V2_CON2_HIGHF       (1u << 8)
111 #define ADC_V2_CON2_C_TIME(x)   (((x) & 7) << 4)
112 #define ADC_V2_CON2_ACH_SEL(x)  (((x) & 0xF) << 0)
113 #define ADC_V2_CON2_ACH_MASK    0xF
114
115 #define MAX_ADC_V2_CHANNELS             10
116 #define MAX_ADC_V1_CHANNELS             8
117 #define MAX_EXYNOS3250_ADC_CHANNELS     2
118
119 /* Bit definitions common for ADC_V1 and ADC_V2 */
120 #define ADC_CON_EN_START        (1u << 0)
121 #define ADC_CON_EN_START_MASK   (0x3 << 0)
122 #define ADC_DATX_PRESSED        (1u << 15)
123 #define ADC_DATX_MASK           0xFFF
124 #define ADC_DATY_MASK           0xFFF
125
126 #define EXYNOS_ADC_TIMEOUT      (msecs_to_jiffies(100))
127
128 #define EXYNOS_ADCV1_PHY_OFFSET 0x0718
129 #define EXYNOS_ADCV2_PHY_OFFSET 0x0720
130
131 struct exynos_adc {
132         struct exynos_adc_data  *data;
133         struct device           *dev;
134         struct input_dev        *input;
135         void __iomem            *regs;
136         struct regmap           *pmu_map;
137         struct clk              *clk;
138         struct clk              *sclk;
139         unsigned int            irq;
140         unsigned int            tsirq;
141         unsigned int            delay;
142         struct regulator        *vdd;
143
144         struct completion       completion;
145
146         u32                     value;
147         unsigned int            version;
148
149         bool                    read_ts;
150         u32                     ts_x;
151         u32                     ts_y;
152 };
153
154 struct exynos_adc_data {
155         int num_channels;
156         bool needs_sclk;
157         bool needs_adc_phy;
158         int phy_offset;
159         u32 mask;
160
161         void (*init_hw)(struct exynos_adc *info);
162         void (*exit_hw)(struct exynos_adc *info);
163         void (*clear_irq)(struct exynos_adc *info);
164         void (*start_conv)(struct exynos_adc *info, unsigned long addr);
165 };
166
167 static void exynos_adc_unprepare_clk(struct exynos_adc *info)
168 {
169         if (info->data->needs_sclk)
170                 clk_unprepare(info->sclk);
171         clk_unprepare(info->clk);
172 }
173
174 static int exynos_adc_prepare_clk(struct exynos_adc *info)
175 {
176         int ret;
177
178         ret = clk_prepare(info->clk);
179         if (ret) {
180                 dev_err(info->dev, "failed preparing adc clock: %d\n", ret);
181                 return ret;
182         }
183
184         if (info->data->needs_sclk) {
185                 ret = clk_prepare(info->sclk);
186                 if (ret) {
187                         clk_unprepare(info->clk);
188                         dev_err(info->dev,
189                                 "failed preparing sclk_adc clock: %d\n", ret);
190                         return ret;
191                 }
192         }
193
194         return 0;
195 }
196
197 static void exynos_adc_disable_clk(struct exynos_adc *info)
198 {
199         if (info->data->needs_sclk)
200                 clk_disable(info->sclk);
201         clk_disable(info->clk);
202 }
203
204 static int exynos_adc_enable_clk(struct exynos_adc *info)
205 {
206         int ret;
207
208         ret = clk_enable(info->clk);
209         if (ret) {
210                 dev_err(info->dev, "failed enabling adc clock: %d\n", ret);
211                 return ret;
212         }
213
214         if (info->data->needs_sclk) {
215                 ret = clk_enable(info->sclk);
216                 if (ret) {
217                         clk_disable(info->clk);
218                         dev_err(info->dev,
219                                 "failed enabling sclk_adc clock: %d\n", ret);
220                         return ret;
221                 }
222         }
223
224         return 0;
225 }
226
227 static void exynos_adc_v1_init_hw(struct exynos_adc *info)
228 {
229         u32 con1;
230
231         if (info->data->needs_adc_phy)
232                 regmap_write(info->pmu_map, info->data->phy_offset, 1);
233
234         /* set default prescaler values and Enable prescaler */
235         con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
236
237         /* Enable 12-bit ADC resolution */
238         con1 |= ADC_V1_CON_RES;
239         writel(con1, ADC_V1_CON(info->regs));
240
241         /* set touchscreen delay */
242         writel(info->delay, ADC_V1_DLY(info->regs));
243 }
244
245 static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
246 {
247         u32 con;
248
249         if (info->data->needs_adc_phy)
250                 regmap_write(info->pmu_map, info->data->phy_offset, 0);
251
252         con = readl(ADC_V1_CON(info->regs));
253         con |= ADC_V1_CON_STANDBY;
254         writel(con, ADC_V1_CON(info->regs));
255 }
256
257 static void exynos_adc_v1_clear_irq(struct exynos_adc *info)
258 {
259         writel(1, ADC_V1_INTCLR(info->regs));
260 }
261
262 static void exynos_adc_v1_start_conv(struct exynos_adc *info,
263                                      unsigned long addr)
264 {
265         u32 con1;
266
267         writel(addr, ADC_V1_MUX(info->regs));
268
269         con1 = readl(ADC_V1_CON(info->regs));
270         writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
271 }
272
273 static const struct exynos_adc_data exynos_adc_v1_data = {
274         .num_channels   = MAX_ADC_V1_CHANNELS,
275         .mask           = ADC_DATX_MASK,        /* 12 bit ADC resolution */
276         .needs_adc_phy  = true,
277         .phy_offset     = EXYNOS_ADCV1_PHY_OFFSET,
278
279         .init_hw        = exynos_adc_v1_init_hw,
280         .exit_hw        = exynos_adc_v1_exit_hw,
281         .clear_irq      = exynos_adc_v1_clear_irq,
282         .start_conv     = exynos_adc_v1_start_conv,
283 };
284
285 static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info,
286                                           unsigned long addr)
287 {
288         u32 con1;
289
290         /* Enable 12 bit ADC resolution */
291         con1 = readl(ADC_V1_CON(info->regs));
292         con1 |= ADC_S3C2416_CON_RES_SEL;
293         writel(con1, ADC_V1_CON(info->regs));
294
295         /* Select channel for S3C2416 */
296         writel(addr, ADC_S3C2410_MUX(info->regs));
297
298         con1 = readl(ADC_V1_CON(info->regs));
299         writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
300 }
301
302 static struct exynos_adc_data const exynos_adc_s3c2416_data = {
303         .num_channels   = MAX_ADC_V1_CHANNELS,
304         .mask           = ADC_DATX_MASK,        /* 12 bit ADC resolution */
305
306         .init_hw        = exynos_adc_v1_init_hw,
307         .exit_hw        = exynos_adc_v1_exit_hw,
308         .start_conv     = exynos_adc_s3c2416_start_conv,
309 };
310
311 static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info,
312                                           unsigned long addr)
313 {
314         u32 con1;
315
316         /* Select channel for S3C2433 */
317         writel(addr, ADC_S3C2410_MUX(info->regs));
318
319         con1 = readl(ADC_V1_CON(info->regs));
320         writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
321 }
322
323 static struct exynos_adc_data const exynos_adc_s3c2443_data = {
324         .num_channels   = MAX_ADC_V1_CHANNELS,
325         .mask           = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
326
327         .init_hw        = exynos_adc_v1_init_hw,
328         .exit_hw        = exynos_adc_v1_exit_hw,
329         .start_conv     = exynos_adc_s3c2443_start_conv,
330 };
331
332 static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
333                                           unsigned long addr)
334 {
335         u32 con1;
336
337         con1 = readl(ADC_V1_CON(info->regs));
338         con1 &= ~ADC_S3C2410_CON_SELMUX(0x7);
339         con1 |= ADC_S3C2410_CON_SELMUX(addr);
340         writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
341 }
342
343 static struct exynos_adc_data const exynos_adc_s3c24xx_data = {
344         .num_channels   = MAX_ADC_V1_CHANNELS,
345         .mask           = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
346
347         .init_hw        = exynos_adc_v1_init_hw,
348         .exit_hw        = exynos_adc_v1_exit_hw,
349         .start_conv     = exynos_adc_s3c64xx_start_conv,
350 };
351
352 static struct exynos_adc_data const exynos_adc_s3c64xx_data = {
353         .num_channels   = MAX_ADC_V1_CHANNELS,
354         .mask           = ADC_DATX_MASK,        /* 12 bit ADC resolution */
355
356         .init_hw        = exynos_adc_v1_init_hw,
357         .exit_hw        = exynos_adc_v1_exit_hw,
358         .clear_irq      = exynos_adc_v1_clear_irq,
359         .start_conv     = exynos_adc_s3c64xx_start_conv,
360 };
361
362 static void exynos_adc_v2_init_hw(struct exynos_adc *info)
363 {
364         u32 con1, con2;
365
366         if (info->data->needs_adc_phy)
367                 regmap_write(info->pmu_map, info->data->phy_offset, 1);
368
369         con1 = ADC_V2_CON1_SOFT_RESET;
370         writel(con1, ADC_V2_CON1(info->regs));
371
372         con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
373                 ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
374         writel(con2, ADC_V2_CON2(info->regs));
375
376         /* Enable interrupts */
377         writel(1, ADC_V2_INT_EN(info->regs));
378 }
379
380 static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
381 {
382         u32 con;
383
384         if (info->data->needs_adc_phy)
385                 regmap_write(info->pmu_map, info->data->phy_offset, 0);
386
387         con = readl(ADC_V2_CON1(info->regs));
388         con &= ~ADC_CON_EN_START;
389         writel(con, ADC_V2_CON1(info->regs));
390 }
391
392 static void exynos_adc_v2_clear_irq(struct exynos_adc *info)
393 {
394         writel(1, ADC_V2_INT_ST(info->regs));
395 }
396
397 static void exynos_adc_v2_start_conv(struct exynos_adc *info,
398                                      unsigned long addr)
399 {
400         u32 con1, con2;
401
402         con2 = readl(ADC_V2_CON2(info->regs));
403         con2 &= ~ADC_V2_CON2_ACH_MASK;
404         con2 |= ADC_V2_CON2_ACH_SEL(addr);
405         writel(con2, ADC_V2_CON2(info->regs));
406
407         con1 = readl(ADC_V2_CON1(info->regs));
408         writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs));
409 }
410
411 static const struct exynos_adc_data exynos_adc_v2_data = {
412         .num_channels   = MAX_ADC_V2_CHANNELS,
413         .mask           = ADC_DATX_MASK, /* 12 bit ADC resolution */
414         .needs_adc_phy  = true,
415         .phy_offset     = EXYNOS_ADCV2_PHY_OFFSET,
416
417         .init_hw        = exynos_adc_v2_init_hw,
418         .exit_hw        = exynos_adc_v2_exit_hw,
419         .clear_irq      = exynos_adc_v2_clear_irq,
420         .start_conv     = exynos_adc_v2_start_conv,
421 };
422
423 static const struct exynos_adc_data exynos3250_adc_data = {
424         .num_channels   = MAX_EXYNOS3250_ADC_CHANNELS,
425         .mask           = ADC_DATX_MASK, /* 12 bit ADC resolution */
426         .needs_sclk     = true,
427         .needs_adc_phy  = true,
428         .phy_offset     = EXYNOS_ADCV1_PHY_OFFSET,
429
430         .init_hw        = exynos_adc_v2_init_hw,
431         .exit_hw        = exynos_adc_v2_exit_hw,
432         .clear_irq      = exynos_adc_v2_clear_irq,
433         .start_conv     = exynos_adc_v2_start_conv,
434 };
435
436 static void exynos_adc_exynos7_init_hw(struct exynos_adc *info)
437 {
438         u32 con1, con2;
439
440         if (info->data->needs_adc_phy)
441                 regmap_write(info->pmu_map, info->data->phy_offset, 1);
442
443         con1 = ADC_V2_CON1_SOFT_RESET;
444         writel(con1, ADC_V2_CON1(info->regs));
445
446         con2 = readl(ADC_V2_CON2(info->regs));
447         con2 &= ~ADC_V2_CON2_C_TIME(7);
448         con2 |= ADC_V2_CON2_C_TIME(0);
449         writel(con2, ADC_V2_CON2(info->regs));
450
451         /* Enable interrupts */
452         writel(1, ADC_V2_INT_EN(info->regs));
453 }
454
455 static const struct exynos_adc_data exynos7_adc_data = {
456         .num_channels   = MAX_ADC_V1_CHANNELS,
457         .mask           = ADC_DATX_MASK, /* 12 bit ADC resolution */
458
459         .init_hw        = exynos_adc_exynos7_init_hw,
460         .exit_hw        = exynos_adc_v2_exit_hw,
461         .clear_irq      = exynos_adc_v2_clear_irq,
462         .start_conv     = exynos_adc_v2_start_conv,
463 };
464
465 static const struct of_device_id exynos_adc_match[] = {
466         {
467                 .compatible = "samsung,s3c2410-adc",
468                 .data = &exynos_adc_s3c24xx_data,
469         }, {
470                 .compatible = "samsung,s3c2416-adc",
471                 .data = &exynos_adc_s3c2416_data,
472         }, {
473                 .compatible = "samsung,s3c2440-adc",
474                 .data = &exynos_adc_s3c24xx_data,
475         }, {
476                 .compatible = "samsung,s3c2443-adc",
477                 .data = &exynos_adc_s3c2443_data,
478         }, {
479                 .compatible = "samsung,s3c6410-adc",
480                 .data = &exynos_adc_s3c64xx_data,
481         }, {
482                 .compatible = "samsung,exynos-adc-v1",
483                 .data = &exynos_adc_v1_data,
484         }, {
485                 .compatible = "samsung,exynos-adc-v2",
486                 .data = &exynos_adc_v2_data,
487         }, {
488                 .compatible = "samsung,exynos3250-adc",
489                 .data = &exynos3250_adc_data,
490         }, {
491                 .compatible = "samsung,exynos7-adc",
492                 .data = &exynos7_adc_data,
493         },
494         {},
495 };
496 MODULE_DEVICE_TABLE(of, exynos_adc_match);
497
498 static struct exynos_adc_data *exynos_adc_get_data(struct platform_device *pdev)
499 {
500         const struct of_device_id *match;
501
502         match = of_match_node(exynos_adc_match, pdev->dev.of_node);
503         return (struct exynos_adc_data *)match->data;
504 }
505
506 static int exynos_read_raw(struct iio_dev *indio_dev,
507                                 struct iio_chan_spec const *chan,
508                                 int *val,
509                                 int *val2,
510                                 long mask)
511 {
512         struct exynos_adc *info = iio_priv(indio_dev);
513         unsigned long timeout;
514         int ret;
515
516         if (mask != IIO_CHAN_INFO_RAW)
517                 return -EINVAL;
518
519         mutex_lock(&indio_dev->mlock);
520         reinit_completion(&info->completion);
521
522         /* Select the channel to be used and Trigger conversion */
523         if (info->data->start_conv)
524                 info->data->start_conv(info, chan->address);
525
526         timeout = wait_for_completion_timeout(&info->completion,
527                                               EXYNOS_ADC_TIMEOUT);
528         if (timeout == 0) {
529                 dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
530                 if (info->data->init_hw)
531                         info->data->init_hw(info);
532                 ret = -ETIMEDOUT;
533         } else {
534                 *val = info->value;
535                 *val2 = 0;
536                 ret = IIO_VAL_INT;
537         }
538
539         mutex_unlock(&indio_dev->mlock);
540
541         return ret;
542 }
543
544 static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
545 {
546         struct exynos_adc *info = iio_priv(indio_dev);
547         unsigned long timeout;
548         int ret;
549
550         mutex_lock(&indio_dev->mlock);
551         info->read_ts = true;
552
553         reinit_completion(&info->completion);
554
555         writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST,
556                ADC_V1_TSC(info->regs));
557
558         /* Select the ts channel to be used and Trigger conversion */
559         info->data->start_conv(info, ADC_S3C2410_MUX_TS);
560
561         timeout = wait_for_completion_timeout(&info->completion,
562                                               EXYNOS_ADC_TIMEOUT);
563         if (timeout == 0) {
564                 dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
565                 if (info->data->init_hw)
566                         info->data->init_hw(info);
567                 ret = -ETIMEDOUT;
568         } else {
569                 *x = info->ts_x;
570                 *y = info->ts_y;
571                 ret = 0;
572         }
573
574         info->read_ts = false;
575         mutex_unlock(&indio_dev->mlock);
576
577         return ret;
578 }
579
580 static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
581 {
582         struct exynos_adc *info = (struct exynos_adc *)dev_id;
583         u32 mask = info->data->mask;
584
585         /* Read value */
586         if (info->read_ts) {
587                 info->ts_x = readl(ADC_V1_DATX(info->regs));
588                 info->ts_y = readl(ADC_V1_DATY(info->regs));
589                 writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs));
590         } else {
591                 info->value = readl(ADC_V1_DATX(info->regs)) & mask;
592         }
593
594         /* clear irq */
595         if (info->data->clear_irq)
596                 info->data->clear_irq(info);
597
598         complete(&info->completion);
599
600         return IRQ_HANDLED;
601 }
602
603 /*
604  * Here we (ab)use a threaded interrupt handler to stay running
605  * for as long as the touchscreen remains pressed, we report
606  * a new event with the latest data and then sleep until the
607  * next timer tick. This mirrors the behavior of the old
608  * driver, with much less code.
609  */
610 static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
611 {
612         struct exynos_adc *info = dev_id;
613         struct iio_dev *dev = dev_get_drvdata(info->dev);
614         u32 x, y;
615         bool pressed;
616         int ret;
617
618         while (info->input->users) {
619                 ret = exynos_read_s3c64xx_ts(dev, &x, &y);
620                 if (ret == -ETIMEDOUT)
621                         break;
622
623                 pressed = x & y & ADC_DATX_PRESSED;
624                 if (!pressed) {
625                         input_report_key(info->input, BTN_TOUCH, 0);
626                         input_sync(info->input);
627                         break;
628                 }
629
630                 input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK);
631                 input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK);
632                 input_report_key(info->input, BTN_TOUCH, 1);
633                 input_sync(info->input);
634
635                 msleep(1);
636         };
637
638         writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
639
640         return IRQ_HANDLED;
641 }
642
643 static int exynos_adc_reg_access(struct iio_dev *indio_dev,
644                               unsigned reg, unsigned writeval,
645                               unsigned *readval)
646 {
647         struct exynos_adc *info = iio_priv(indio_dev);
648
649         if (readval == NULL)
650                 return -EINVAL;
651
652         *readval = readl(info->regs + reg);
653
654         return 0;
655 }
656
657 static const struct iio_info exynos_adc_iio_info = {
658         .read_raw = &exynos_read_raw,
659         .debugfs_reg_access = &exynos_adc_reg_access,
660         .driver_module = THIS_MODULE,
661 };
662
663 #define ADC_CHANNEL(_index, _id) {                      \
664         .type = IIO_VOLTAGE,                            \
665         .indexed = 1,                                   \
666         .channel = _index,                              \
667         .address = _index,                              \
668         .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),   \
669         .datasheet_name = _id,                          \
670 }
671
672 static const struct iio_chan_spec exynos_adc_iio_channels[] = {
673         ADC_CHANNEL(0, "adc0"),
674         ADC_CHANNEL(1, "adc1"),
675         ADC_CHANNEL(2, "adc2"),
676         ADC_CHANNEL(3, "adc3"),
677         ADC_CHANNEL(4, "adc4"),
678         ADC_CHANNEL(5, "adc5"),
679         ADC_CHANNEL(6, "adc6"),
680         ADC_CHANNEL(7, "adc7"),
681         ADC_CHANNEL(8, "adc8"),
682         ADC_CHANNEL(9, "adc9"),
683 };
684
685 static int exynos_adc_remove_devices(struct device *dev, void *c)
686 {
687         struct platform_device *pdev = to_platform_device(dev);
688
689         platform_device_unregister(pdev);
690
691         return 0;
692 }
693
694 static int exynos_adc_ts_open(struct input_dev *dev)
695 {
696         struct exynos_adc *info = input_get_drvdata(dev);
697
698         enable_irq(info->tsirq);
699
700         return 0;
701 }
702
703 static void exynos_adc_ts_close(struct input_dev *dev)
704 {
705         struct exynos_adc *info = input_get_drvdata(dev);
706
707         disable_irq(info->tsirq);
708 }
709
710 static int exynos_adc_ts_init(struct exynos_adc *info)
711 {
712         int ret;
713
714         if (info->tsirq <= 0)
715                 return -ENODEV;
716
717         info->input = input_allocate_device();
718         if (!info->input)
719                 return -ENOMEM;
720
721         info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
722         info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
723
724         input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0);
725         input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0);
726
727         info->input->name = "S3C24xx TouchScreen";
728         info->input->id.bustype = BUS_HOST;
729         info->input->open = exynos_adc_ts_open;
730         info->input->close = exynos_adc_ts_close;
731
732         input_set_drvdata(info->input, info);
733
734         ret = input_register_device(info->input);
735         if (ret) {
736                 input_free_device(info->input);
737                 return ret;
738         }
739
740         disable_irq(info->tsirq);
741         ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr,
742                                    IRQF_ONESHOT, "touchscreen", info);
743         if (ret)
744                 input_unregister_device(info->input);
745
746         return ret;
747 }
748
749 static int exynos_adc_probe(struct platform_device *pdev)
750 {
751         struct exynos_adc *info = NULL;
752         struct device_node *np = pdev->dev.of_node;
753         struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
754         struct iio_dev *indio_dev = NULL;
755         struct resource *mem;
756         bool has_ts = false;
757         int ret = -ENODEV;
758         int irq;
759
760         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc));
761         if (!indio_dev) {
762                 dev_err(&pdev->dev, "failed allocating iio device\n");
763                 return -ENOMEM;
764         }
765
766         info = iio_priv(indio_dev);
767
768         info->data = exynos_adc_get_data(pdev);
769         if (!info->data) {
770                 dev_err(&pdev->dev, "failed getting exynos_adc_data\n");
771                 return -EINVAL;
772         }
773
774         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
775         info->regs = devm_ioremap_resource(&pdev->dev, mem);
776         if (IS_ERR(info->regs))
777                 return PTR_ERR(info->regs);
778
779
780         if (info->data->needs_adc_phy) {
781                 info->pmu_map = syscon_regmap_lookup_by_phandle(
782                                         pdev->dev.of_node,
783                                         "samsung,syscon-phandle");
784                 if (IS_ERR(info->pmu_map)) {
785                         dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
786                         return PTR_ERR(info->pmu_map);
787                 }
788         }
789
790         irq = platform_get_irq(pdev, 0);
791         if (irq < 0) {
792                 dev_err(&pdev->dev, "no irq resource?\n");
793                 return irq;
794         }
795         info->irq = irq;
796
797         irq = platform_get_irq(pdev, 1);
798         if (irq == -EPROBE_DEFER)
799                 return irq;
800
801         info->tsirq = irq;
802
803         info->dev = &pdev->dev;
804
805         init_completion(&info->completion);
806
807         info->clk = devm_clk_get(&pdev->dev, "adc");
808         if (IS_ERR(info->clk)) {
809                 dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
810                                                         PTR_ERR(info->clk));
811                 return PTR_ERR(info->clk);
812         }
813
814         if (info->data->needs_sclk) {
815                 info->sclk = devm_clk_get(&pdev->dev, "sclk");
816                 if (IS_ERR(info->sclk)) {
817                         dev_err(&pdev->dev,
818                                 "failed getting sclk clock, err = %ld\n",
819                                 PTR_ERR(info->sclk));
820                         return PTR_ERR(info->sclk);
821                 }
822         }
823
824         info->vdd = devm_regulator_get(&pdev->dev, "vdd");
825         if (IS_ERR(info->vdd)) {
826                 dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
827                                                         PTR_ERR(info->vdd));
828                 return PTR_ERR(info->vdd);
829         }
830
831         ret = regulator_enable(info->vdd);
832         if (ret)
833                 return ret;
834
835         ret = exynos_adc_prepare_clk(info);
836         if (ret)
837                 goto err_disable_reg;
838
839         ret = exynos_adc_enable_clk(info);
840         if (ret)
841                 goto err_unprepare_clk;
842
843         platform_set_drvdata(pdev, indio_dev);
844
845         indio_dev->name = dev_name(&pdev->dev);
846         indio_dev->dev.parent = &pdev->dev;
847         indio_dev->dev.of_node = pdev->dev.of_node;
848         indio_dev->info = &exynos_adc_iio_info;
849         indio_dev->modes = INDIO_DIRECT_MODE;
850         indio_dev->channels = exynos_adc_iio_channels;
851         indio_dev->num_channels = info->data->num_channels;
852
853         ret = request_irq(info->irq, exynos_adc_isr,
854                                         0, dev_name(&pdev->dev), info);
855         if (ret < 0) {
856                 dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
857                                                         info->irq);
858                 goto err_disable_clk;
859         }
860
861         ret = iio_device_register(indio_dev);
862         if (ret)
863                 goto err_irq;
864
865         if (info->data->init_hw)
866                 info->data->init_hw(info);
867
868         /* leave out any TS related code if unreachable */
869         if (IS_REACHABLE(CONFIG_INPUT)) {
870                 has_ts = of_property_read_bool(pdev->dev.of_node,
871                                                "has-touchscreen") || pdata;
872         }
873
874         if (pdata)
875                 info->delay = pdata->delay;
876         else
877                 info->delay = 10000;
878
879         if (has_ts)
880                 ret = exynos_adc_ts_init(info);
881         if (ret)
882                 goto err_iio;
883
884         ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
885         if (ret < 0) {
886                 dev_err(&pdev->dev, "failed adding child nodes\n");
887                 goto err_of_populate;
888         }
889
890         return 0;
891
892 err_of_populate:
893         device_for_each_child(&indio_dev->dev, NULL,
894                                 exynos_adc_remove_devices);
895         if (has_ts) {
896                 input_unregister_device(info->input);
897                 free_irq(info->tsirq, info);
898         }
899 err_iio:
900         iio_device_unregister(indio_dev);
901 err_irq:
902         free_irq(info->irq, info);
903 err_disable_clk:
904         if (info->data->exit_hw)
905                 info->data->exit_hw(info);
906         exynos_adc_disable_clk(info);
907 err_unprepare_clk:
908         exynos_adc_unprepare_clk(info);
909 err_disable_reg:
910         regulator_disable(info->vdd);
911         return ret;
912 }
913
914 static int exynos_adc_remove(struct platform_device *pdev)
915 {
916         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
917         struct exynos_adc *info = iio_priv(indio_dev);
918
919         if (IS_REACHABLE(CONFIG_INPUT) && info->input) {
920                 free_irq(info->tsirq, info);
921                 input_unregister_device(info->input);
922         }
923         device_for_each_child(&indio_dev->dev, NULL,
924                                 exynos_adc_remove_devices);
925         iio_device_unregister(indio_dev);
926         free_irq(info->irq, info);
927         if (info->data->exit_hw)
928                 info->data->exit_hw(info);
929         exynos_adc_disable_clk(info);
930         exynos_adc_unprepare_clk(info);
931         regulator_disable(info->vdd);
932
933         return 0;
934 }
935
936 #ifdef CONFIG_PM_SLEEP
937 static int exynos_adc_suspend(struct device *dev)
938 {
939         struct iio_dev *indio_dev = dev_get_drvdata(dev);
940         struct exynos_adc *info = iio_priv(indio_dev);
941
942         if (info->data->exit_hw)
943                 info->data->exit_hw(info);
944         exynos_adc_disable_clk(info);
945         regulator_disable(info->vdd);
946
947         return 0;
948 }
949
950 static int exynos_adc_resume(struct device *dev)
951 {
952         struct iio_dev *indio_dev = dev_get_drvdata(dev);
953         struct exynos_adc *info = iio_priv(indio_dev);
954         int ret;
955
956         ret = regulator_enable(info->vdd);
957         if (ret)
958                 return ret;
959
960         ret = exynos_adc_enable_clk(info);
961         if (ret)
962                 return ret;
963
964         if (info->data->init_hw)
965                 info->data->init_hw(info);
966
967         return 0;
968 }
969 #endif
970
971 static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops,
972                         exynos_adc_suspend,
973                         exynos_adc_resume);
974
975 static struct platform_driver exynos_adc_driver = {
976         .probe          = exynos_adc_probe,
977         .remove         = exynos_adc_remove,
978         .driver         = {
979                 .name   = "exynos-adc",
980                 .of_match_table = exynos_adc_match,
981                 .pm     = &exynos_adc_pm_ops,
982         },
983 };
984
985 module_platform_driver(exynos_adc_driver);
986
987 MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>");
988 MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
989 MODULE_LICENSE("GPL v2");