2 # Accelerometer drivers
4 # When adding new entries keep the list in alphabetical order
9 tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
12 select IIO_TRIGGERED_BUFFER
14 Say Y here if you want to build a driver for the Bosch BMA180 or
15 BMA250 triaxial acceleration sensor.
17 To compile this driver as a module, choose M here: the
18 module will be called bma180.
21 tristate "Bosch BMA220 3-Axis Accelerometer Driver"
24 select IIO_TRIGGERED_BUFFER
26 Say yes here to add support for the Bosch BMA220 triaxial
29 To compile this driver as a module, choose M here: the
30 module will be called bma220_spi.
33 tristate "Bosch BMC150 Accelerometer Driver"
35 select IIO_TRIGGERED_BUFFER
37 select BMC150_ACCEL_I2C if I2C
38 select BMC150_ACCEL_SPI if SPI
40 Say yes here to build support for the following Bosch accelerometers:
41 BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
43 This is a combo module with both accelerometer and magnetometer.
44 This driver is only implementing accelerometer part, which has
45 its own address and register map.
47 config BMC150_ACCEL_I2C
51 config BMC150_ACCEL_SPI
56 tristate "Domintech DMARD06 Digital Accelerometer Driver"
57 depends on OF || COMPILE_TEST
60 Say yes here to build support for the Domintech low-g tri-axial
61 digital accelerometers: DMARD05, DMARD06, DMARD07.
63 To compile this driver as a module, choose M here: the
64 module will be called dmard06.
67 tristate "Domintech DMARD09 3-axis Accelerometer Driver"
70 Say yes here to get support for the Domintech DMARD09 3-axis
73 Choosing M will build the driver as a module. If so, the module
74 will be called dmard09.
76 config HID_SENSOR_ACCEL_3D
77 depends on HID_SENSOR_HUB
79 select IIO_TRIGGERED_BUFFER
80 select HID_SENSOR_IIO_COMMON
81 select HID_SENSOR_IIO_TRIGGER
82 tristate "HID Accelerometers 3D"
84 Say yes here to build support for the HID SENSOR
87 To compile this driver as a module, choose M here: the
88 module will be called hid-sensor-accel-3d.
90 config IIO_ST_ACCEL_3AXIS
91 tristate "STMicroelectronics accelerometers 3-Axis Driver"
92 depends on (I2C || SPI_MASTER) && SYSFS
93 select IIO_ST_SENSORS_CORE
94 select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
95 select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
96 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
98 Say yes here to build support for STMicroelectronics accelerometers:
99 LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
100 LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL.
102 This driver can also be built as a module. If so, these modules
104 - st_accel (core functions for the driver [it is mandatory]);
105 - st_accel_i2c (necessary for the I2C devices [optional*]);
106 - st_accel_spi (necessary for the SPI devices [optional*]);
108 (*) one of these is necessary to do something.
110 config IIO_ST_ACCEL_I2C_3AXIS
112 depends on IIO_ST_ACCEL_3AXIS
113 depends on IIO_ST_SENSORS_I2C
115 config IIO_ST_ACCEL_SPI_3AXIS
117 depends on IIO_ST_ACCEL_3AXIS
118 depends on IIO_ST_SENSORS_SPI
121 tristate "Kionix KXSD9 Accelerometer Driver"
123 select IIO_TRIGGERED_BUFFER
125 Say yes here to build support for the Kionix KXSD9 accelerometer.
126 It can be accessed using an (optional) SPI or I2C interface.
128 To compile this driver as a module, choose M here: the module
129 will be called kxsd9.
132 tristate "Kionix KXSD9 SPI transport"
138 Say yes here to enable the Kionix KXSD9 accelerometer
139 SPI transport channel.
142 tristate "Kionix KXSD9 I2C transport"
148 Say yes here to enable the Kionix KXSD9 accelerometer
149 I2C transport channel.
152 tristate "Kionix 3-Axis Accelerometer Driver"
155 select IIO_TRIGGERED_BUFFER
157 Say Y here if you want to build a driver for the Kionix KXCJK-1013
158 triaxial acceleration sensor. This driver also supports KXCJ9-1008
161 To compile this driver as a module, choose M here: the module will
162 be called kxcjk-1013.
165 tristate "mCube MC3230 Digital Accelerometer Driver"
168 Say yes here to build support for the mCube MC3230 low-g tri-axial
169 digital accelerometer.
171 To compile this driver as a module, choose M here: the
172 module will be called mc3230.
177 select IIO_TRIGGERED_BUFFER
180 tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
185 Say yes here to build support for the Freescale MMA7455L and
186 MMA7456L 3-axis accelerometer.
188 To compile this driver as a module, choose M here: the module
189 will be called mma7455_i2c.
192 tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
193 depends on SPI_MASTER
197 Say yes here to build support for the Freescale MMA7455L and
198 MMA7456L 3-axis accelerometer.
200 To compile this driver as a module, choose M here: the module
201 will be called mma7455_spi.
204 tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver"
207 Say yes here to get support for the Freescale MMA7660FC 3-Axis
210 Choosing M will build the driver as a module. If so, the module
211 will be called mma7660.
214 tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver"
217 select IIO_TRIGGERED_BUFFER
219 Say yes here to build support for the following Freescale / NXP 3-axis
220 accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC,
223 To compile this driver as a module, choose M here: the module
224 will be called mma8452.
230 tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
235 Say yes here to build support for the Freescale MMA9551L
236 Intelligent Motion-Sensing Platform Driver.
238 To compile this driver as a module, choose M here: the module
239 will be called mma9551.
242 tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
246 Say yes here to build support for the Freescale MMA9553L
247 Intelligent Pedometer Platform Driver.
249 To compile this driver as a module, choose M here: the module
250 will be called mma9553.
253 tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
256 select IIO_TRIGGERED_BUFFER
259 Say yes here to build support for the Memsic MXC4005XC 3-axis
262 To compile this driver as a module, choose M. The module will be
266 tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
270 Say yes here to build support for the Memsic MXC6255 Orientation
271 Sensing Accelerometer Driver.
273 To compile this driver as a module, choose M here: the module will be
277 tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
280 select IIO_TRIGGERED_BUFFER
282 Say yes here to get support for the Sensortek STK8312 3-axis
285 Choosing M will build the driver as a module. If so, the module
286 will be called stk8312.
289 tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
292 select IIO_TRIGGERED_BUFFER
294 Say yes here to get support for the Sensortek STK8BA50 3-axis
297 Choosing M will build the driver as a module. If so, the module
298 will be called stk8ba50.