drivers/i2c/busses/i2c-designware-master.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Synopsys DesignWare I2C adapter driver (master only).
   4  *
   5  * Based on the TI DAVINCI I2C adapter driver.
   6  *
   7  * Copyright (C) 2006 Texas Instruments.
   8  * Copyright (C) 2007 MontaVista Software Inc.
   9  * Copyright (C) 2009 Provigent Ltd.
  10  */
  11 #include <linux/delay.h>
  12 #include <linux/err.h>
  13 #include <linux/errno.h>
  14 #include <linux/export.h>
  15 #include <linux/gpio/consumer.h>
  16 #include <linux/i2c.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/io.h>
  19 #include <linux/module.h>
  20 #include <linux/pm_runtime.h>
  21 #include <linux/regmap.h>
  22 #include <linux/reset.h>
  23
  24 #include "i2c-designware-core.h"
  25
  26 static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
  27 {
  28         /* Configure Tx/Rx FIFO threshold levels */
  29         regmap_write(dev->map, DW_IC_TX_TL, dev->tx_fifo_depth / 2);
  30         regmap_write(dev->map, DW_IC_RX_TL, 0);
  31
  32         /* Configure the I2C master */
  33         regmap_write(dev->map, DW_IC_CON, dev->master_cfg);
  34 }
  35
  36 static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
  37 {
  38         const char *mode_str, *fp_str = "";
  39         u32 comp_param1;
  40         u32 sda_falling_time, scl_falling_time;
  41         struct i2c_timings *t = &dev->timings;
  42         u32 ic_clk;
  43         int ret;
  44
  45         ret = i2c_dw_acquire_lock(dev);
  46         if (ret)
  47                 return ret;
  48
  49         ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, &comp_param1);
  50         i2c_dw_release_lock(dev);
  51         if (ret)
  52                 return ret;
  53
  54         /* Set standard and fast speed dividers for high/low periods */
  55         sda_falling_time = t->sda_fall_ns ?: 300; /* ns */
  56         scl_falling_time = t->scl_fall_ns ?: 300; /* ns */
  57
  58         /* Calculate SCL timing parameters for standard mode if not set */
  59         if (!dev->ss_hcnt || !dev->ss_lcnt) {
  60                 ic_clk = i2c_dw_clk_rate(dev);
  61                 dev->ss_hcnt =
  62                         i2c_dw_scl_hcnt(ic_clk,
  63                                         4000,   /* tHD;STA = tHIGH = 4.0 us */
  64                                         sda_falling_time,
  65                                         0,      /* 0: DW default, 1: Ideal */
  66                                         0);     /* No offset */
  67                 dev->ss_lcnt =
  68                         i2c_dw_scl_lcnt(ic_clk,
  69                                         4700,   /* tLOW = 4.7 us */
  70                                         scl_falling_time,
  71                                         0);     /* No offset */
  72         }
  73         dev_dbg(dev->dev, "Standard Mode HCNT:LCNT = %d:%d\n",
  74                 dev->ss_hcnt, dev->ss_lcnt);
  75
  76         /*
  77          * Set SCL timing parameters for fast mode or fast mode plus. Only
  78          * difference is the timing parameter values since the registers are
  79          * the same.
  80          */
  81         if (t->bus_freq_hz == 1000000) {
  82                 /*
  83                  * Check are Fast Mode Plus parameters available. Calculate
  84                  * SCL timing parameters for Fast Mode Plus if not set.
  85                  */
  86                 if (dev->fp_hcnt && dev->fp_lcnt) {
  87                         dev->fs_hcnt = dev->fp_hcnt;
  88                         dev->fs_lcnt = dev->fp_lcnt;
  89                 } else {
  90                         ic_clk = i2c_dw_clk_rate(dev);
  91                         dev->fs_hcnt =
  92                                 i2c_dw_scl_hcnt(ic_clk,
  93                                                 260,    /* tHIGH = 260 ns */
  94                                                 sda_falling_time,
  95                                                 0,      /* DW default */
  96                                                 0);     /* No offset */
  97                         dev->fs_lcnt =
  98                                 i2c_dw_scl_lcnt(ic_clk,
  99                                                 500,    /* tLOW = 500 ns */
 100                                                 scl_falling_time,
 101                                                 0);     /* No offset */
 102                 }
 103                 fp_str = " Plus";
 104         }
 105         /*
 106          * Calculate SCL timing parameters for fast mode if not set. They are
 107          * needed also in high speed mode.
 108          */
 109         if (!dev->fs_hcnt || !dev->fs_lcnt) {
 110                 ic_clk = i2c_dw_clk_rate(dev);
 111                 dev->fs_hcnt =
 112                         i2c_dw_scl_hcnt(ic_clk,
 113                                         600,    /* tHD;STA = tHIGH = 0.6 us */
 114                                         sda_falling_time,
 115                                         0,      /* 0: DW default, 1: Ideal */
 116                                         0);     /* No offset */
 117                 dev->fs_lcnt =
 118                         i2c_dw_scl_lcnt(ic_clk,
 119                                         1300,   /* tLOW = 1.3 us */
 120                                         scl_falling_time,
 121                                         0);     /* No offset */
 122         }
 123         dev_dbg(dev->dev, "Fast Mode%s HCNT:LCNT = %d:%d\n",
 124                 fp_str, dev->fs_hcnt, dev->fs_lcnt);
 125
 126         /* Check is high speed possible and fall back to fast mode if not */
 127         if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
 128                 DW_IC_CON_SPEED_HIGH) {
 129                 if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
 130                         != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
 131                         dev_err(dev->dev, "High Speed not supported!\n");
 132                         t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
 133                         dev->master_cfg &= ~DW_IC_CON_SPEED_MASK;
 134                         dev->master_cfg |= DW_IC_CON_SPEED_FAST;
 135                         dev->hs_hcnt = 0;
 136                         dev->hs_lcnt = 0;
 137                 } else if (!dev->hs_hcnt || !dev->hs_lcnt) {
 138                         ic_clk = i2c_dw_clk_rate(dev);
 139                         dev->hs_hcnt =
 140                                 i2c_dw_scl_hcnt(ic_clk,
 141                                                 160,    /* tHIGH = 160 ns */
 142                                                 sda_falling_time,
 143                                                 0,      /* DW default */
 144                                                 0);     /* No offset */
 145                         dev->hs_lcnt =
 146                                 i2c_dw_scl_lcnt(ic_clk,
 147                                                 320,    /* tLOW = 320 ns */
 148                                                 scl_falling_time,
 149                                                 0);     /* No offset */
 150                 }
 151                 dev_dbg(dev->dev, "High Speed Mode HCNT:LCNT = %d:%d\n",
 152                         dev->hs_hcnt, dev->hs_lcnt);
 153         }
 154
 155         ret = i2c_dw_set_sda_hold(dev);
 156         if (ret)
 157                 goto out;
 158
 159         switch (dev->master_cfg & DW_IC_CON_SPEED_MASK) {
 160         case DW_IC_CON_SPEED_STD:
 161                 mode_str = "Standard Mode";
 162                 break;
 163         case DW_IC_CON_SPEED_HIGH:
 164                 mode_str = "High Speed Mode";
 165                 break;
 166         default:
 167                 mode_str = "Fast Mode";
 168         }
 169         dev_dbg(dev->dev, "Bus speed: %s%s\n", mode_str, fp_str);
 170
 171 out:
 172         return ret;
 173 }
 174
 175 /**
 176  * i2c_dw_init() - Initialize the designware I2C master hardware
 177  * @dev: device private data
 178  *
 179  * This functions configures and enables the I2C master.
 180  * This function is called during I2C init function, and in case of timeout at
 181  * run time.
 182  */
 183 static int i2c_dw_init_master(struct dw_i2c_dev *dev)
 184 {
 185         int ret;
 186
 187         ret = i2c_dw_acquire_lock(dev);
 188         if (ret)
 189                 return ret;
 190
 191         /* Disable the adapter */
 192         __i2c_dw_disable(dev);
 193
 194         /* Write standard speed timing parameters */
 195         regmap_write(dev->map, DW_IC_SS_SCL_HCNT, dev->ss_hcnt);
 196         regmap_write(dev->map, DW_IC_SS_SCL_LCNT, dev->ss_lcnt);
 197
 198         /* Write fast mode/fast mode plus timing parameters */
 199         regmap_write(dev->map, DW_IC_FS_SCL_HCNT, dev->fs_hcnt);
 200         regmap_write(dev->map, DW_IC_FS_SCL_LCNT, dev->fs_lcnt);
 201
 202         /* Write high speed timing parameters if supported */
 203         if (dev->hs_hcnt && dev->hs_lcnt) {
 204                 regmap_write(dev->map, DW_IC_HS_SCL_HCNT, dev->hs_hcnt);
 205                 regmap_write(dev->map, DW_IC_HS_SCL_LCNT, dev->hs_lcnt);
 206         }
 207
 208         /* Write SDA hold time if supported */
 209         if (dev->sda_hold_time)
 210                 regmap_write(dev->map, DW_IC_SDA_HOLD, dev->sda_hold_time);
 211
 212         i2c_dw_configure_fifo_master(dev);
 213         i2c_dw_release_lock(dev);
 214
 215         return 0;
 216 }
 217
 218 static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 219 {
 220         struct i2c_msg *msgs = dev->msgs;
 221         u32 ic_con = 0, ic_tar = 0;
 222         u32 dummy;
 223
 224         /* Disable the adapter */
 225         __i2c_dw_disable(dev);
 226
 227         /* If the slave address is ten bit address, enable 10BITADDR */
 228         if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
 229                 ic_con = DW_IC_CON_10BITADDR_MASTER;
 230                 /*
 231                  * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
 232                  * mode has to be enabled via bit 12 of IC_TAR register.
 233                  * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
 234                  * detected from registers.
 235                  */
 236                 ic_tar = DW_IC_TAR_10BITADDR_MASTER;
 237         }
 238
 239         regmap_update_bits(dev->map, DW_IC_CON, DW_IC_CON_10BITADDR_MASTER,
 240                            ic_con);
 241
 242         /*
 243          * Set the slave (target) address and enable 10-bit addressing mode
 244          * if applicable.
 245          */
 246         regmap_write(dev->map, DW_IC_TAR,
 247                      msgs[dev->msg_write_idx].addr | ic_tar);
 248
 249         /* Enforce disabled interrupts (due to HW issues) */
 250         i2c_dw_disable_int(dev);
 251
 252         /* Enable the adapter */
 253         __i2c_dw_enable(dev);
 254
 255         /* Dummy read to avoid the register getting stuck on Bay Trail */
 256         regmap_read(dev->map, DW_IC_ENABLE_STATUS, &dummy);
 257
 258         /* Clear and enable interrupts */
 259         regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
 260         regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_MASTER_MASK);
 261 }
 262
 263 /*
 264  * Initiate (and continue) low level master read/write transaction.
 265  * This function is only called from i2c_dw_isr, and pumping i2c_msg
 266  * messages into the tx buffer.  Even if the size of i2c_msg data is
 267  * longer than the size of the tx buffer, it handles everything.
 268  */
 269 static void
 270 i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 271 {
 272         struct i2c_msg *msgs = dev->msgs;
 273         u32 intr_mask;
 274         int tx_limit, rx_limit;
 275         u32 addr = msgs[dev->msg_write_idx].addr;
 276         u32 buf_len = dev->tx_buf_len;
 277         u8 *buf = dev->tx_buf;
 278         bool need_restart = false;
 279         unsigned int flr;
 280
 281         intr_mask = DW_IC_INTR_MASTER_MASK;
 282
 283         for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
 284                 u32 flags = msgs[dev->msg_write_idx].flags;
 285
 286                 /*
 287                  * If target address has changed, we need to
 288                  * reprogram the target address in the I2C
 289                  * adapter when we are done with this transfer.
 290                  */
 291                 if (msgs[dev->msg_write_idx].addr != addr) {
 292                         dev_err(dev->dev,
 293                                 "%s: invalid target address\n", __func__);
 294                         dev->msg_err = -EINVAL;
 295                         break;
 296                 }
 297
 298                 if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
 299                         /* new i2c_msg */
 300                         buf = msgs[dev->msg_write_idx].buf;
 301                         buf_len = msgs[dev->msg_write_idx].len;
 302
 303                         /* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
 304                          * IC_RESTART_EN are set, we must manually
 305                          * set restart bit between messages.
 306                          */
 307                         if ((dev->master_cfg & DW_IC_CON_RESTART_EN) &&
 308                                         (dev->msg_write_idx > 0))
 309                                 need_restart = true;
 310                 }
 311
 312                 regmap_read(dev->map, DW_IC_TXFLR, &flr);
 313                 tx_limit = dev->tx_fifo_depth - flr;
 314
 315                 regmap_read(dev->map, DW_IC_RXFLR, &flr);
 316                 rx_limit = dev->rx_fifo_depth - flr;
 317
 318                 while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
 319                         u32 cmd = 0;
 320
 321                         /*
 322                          * If IC_EMPTYFIFO_HOLD_MASTER_EN is set we must
 323                          * manually set the stop bit. However, it cannot be
 324                          * detected from the registers so we set it always
 325                          * when writing/reading the last byte.
 326                          */
 327
 328                         /*
 329                          * i2c-core always sets the buffer length of
 330                          * I2C_FUNC_SMBUS_BLOCK_DATA to 1. The length will
 331                          * be adjusted when receiving the first byte.
 332                          * Thus we can't stop the transaction here.
 333                          */
 334                         if (dev->msg_write_idx == dev->msgs_num - 1 &&
 335                             buf_len == 1 && !(flags & I2C_M_RECV_LEN))
 336                                 cmd |= BIT(9);
 337
 338                         if (need_restart) {
 339                                 cmd |= BIT(10);
 340                                 need_restart = false;
 341                         }
 342
 343                         if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
 344
 345                                 /* Avoid rx buffer overrun */
 346                                 if (dev->rx_outstanding >= dev->rx_fifo_depth)
 347                                         break;
 348
 349                                 regmap_write(dev->map, DW_IC_DATA_CMD,
 350                                              cmd | 0x100);
 351                                 rx_limit--;
 352                                 dev->rx_outstanding++;
 353                         } else {
 354                                 regmap_write(dev->map, DW_IC_DATA_CMD,
 355                                              cmd | *buf++);
 356                         }
 357                         tx_limit--; buf_len--;
 358                 }
 359
 360                 dev->tx_buf = buf;
 361                 dev->tx_buf_len = buf_len;
 362
 363                 /*
 364                  * Because we don't know the buffer length in the
 365                  * I2C_FUNC_SMBUS_BLOCK_DATA case, we can't stop
 366                  * the transaction here.
 367                  */
 368                 if (buf_len > 0 || flags & I2C_M_RECV_LEN) {
 369                         /* more bytes to be written */
 370                         dev->status |= STATUS_WRITE_IN_PROGRESS;
 371                         break;
 372                 } else
 373                         dev->status &= ~STATUS_WRITE_IN_PROGRESS;
 374         }
 375
 376         /*
 377          * If i2c_msg index search is completed, we don't need TX_EMPTY
 378          * interrupt any more.
 379          */
 380         if (dev->msg_write_idx == dev->msgs_num)
 381                 intr_mask &= ~DW_IC_INTR_TX_EMPTY;
 382
 383         if (dev->msg_err)
 384                 intr_mask = 0;
 385
 386         regmap_write(dev->map,  DW_IC_INTR_MASK, intr_mask);
 387 }
 388
 389 static u8
 390 i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
 391 {
 392         struct i2c_msg *msgs = dev->msgs;
 393         u32 flags = msgs[dev->msg_read_idx].flags;
 394
 395         /*
 396          * Adjust the buffer length and mask the flag
 397          * after receiving the first byte.
 398          */
 399         len += (flags & I2C_CLIENT_PEC) ? 2 : 1;
 400         dev->tx_buf_len = len - min_t(u8, len, dev->rx_outstanding);
 401         msgs[dev->msg_read_idx].len = len;
 402         msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN;
 403
 404         return len;
 405 }
 406
 407 static void
 408 i2c_dw_read(struct dw_i2c_dev *dev)
 409 {
 410         struct i2c_msg *msgs = dev->msgs;
 411         unsigned int rx_valid;
 412
 413         for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
 414                 u32 len, tmp;
 415                 u8 *buf;
 416
 417                 if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
 418                         continue;
 419
 420                 if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
 421                         len = msgs[dev->msg_read_idx].len;
 422                         buf = msgs[dev->msg_read_idx].buf;
 423                 } else {
 424                         len = dev->rx_buf_len;
 425                         buf = dev->rx_buf;
 426                 }
 427
 428                 regmap_read(dev->map, DW_IC_RXFLR, &rx_valid);
 429
 430                 for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
 431                         u32 flags = msgs[dev->msg_read_idx].flags;
 432
 433                         regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
 434                         /* Ensure length byte is a valid value */
 435                         if (flags & I2C_M_RECV_LEN &&
 436                             tmp <= I2C_SMBUS_BLOCK_MAX && tmp > 0) {
 437                                 len = i2c_dw_recv_len(dev, tmp);
 438                         }
 439                         *buf++ = tmp;
 440                         dev->rx_outstanding--;
 441                 }
 442
 443                 if (len > 0) {
 444                         dev->status |= STATUS_READ_IN_PROGRESS;
 445                         dev->rx_buf_len = len;
 446                         dev->rx_buf = buf;
 447                         return;
 448                 } else
 449                         dev->status &= ~STATUS_READ_IN_PROGRESS;
 450         }
 451 }
 452
 453 /*
 454  * Prepare controller for a transaction and call i2c_dw_xfer_msg.
 455  */
 456 static int
 457 i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 458 {
 459         struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 460         int ret;
 461
 462         dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
 463
 464         pm_runtime_get_sync(dev->dev);
 465
 466         if (dev_WARN_ONCE(dev->dev, dev->suspended, "Transfer while suspended\n")) {
 467                 ret = -ESHUTDOWN;
 468                 goto done_nolock;
 469         }
 470
 471         reinit_completion(&dev->cmd_complete);
 472         dev->msgs = msgs;
 473         dev->msgs_num = num;
 474         dev->cmd_err = 0;
 475         dev->msg_write_idx = 0;
 476         dev->msg_read_idx = 0;
 477         dev->msg_err = 0;
 478         dev->status = STATUS_IDLE;
 479         dev->abort_source = 0;
 480         dev->rx_outstanding = 0;
 481
 482         ret = i2c_dw_acquire_lock(dev);
 483         if (ret)
 484                 goto done_nolock;
 485
 486         ret = i2c_dw_wait_bus_not_busy(dev);
 487         if (ret < 0)
 488                 goto done;
 489
 490         /* Start the transfers */
 491         i2c_dw_xfer_init(dev);
 492
 493         /* Wait for tx to complete */
 494         if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
 495                 dev_err(dev->dev, "controller timed out\n");
 496                 /* i2c_dw_init implicitly disables the adapter */
 497                 i2c_recover_bus(&dev->adapter);
 498                 i2c_dw_init_master(dev);
 499                 ret = -ETIMEDOUT;
 500                 goto done;
 501         }
 502
 503         /*
 504          * We must disable the adapter before returning and signaling the end
 505          * of the current transfer. Otherwise the hardware might continue
 506          * generating interrupts which in turn causes a race condition with
 507          * the following transfer.  Needs some more investigation if the
 508          * additional interrupts are a hardware bug or this driver doesn't
 509          * handle them correctly yet.
 510          */
 511         __i2c_dw_disable_nowait(dev);
 512
 513         if (dev->msg_err) {
 514                 ret = dev->msg_err;
 515                 goto done;
 516         }
 517
 518         /* No error */
 519         if (likely(!dev->cmd_err && !dev->status)) {
 520                 ret = num;
 521                 goto done;
 522         }
 523
 524         /* We have an error */
 525         if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
 526                 ret = i2c_dw_handle_tx_abort(dev);
 527                 goto done;
 528         }
 529
 530         if (dev->status)
 531                 dev_err(dev->dev,
 532                         "transfer terminated early - interrupt latency too high?\n");
 533
 534         ret = -EIO;
 535
 536 done:
 537         i2c_dw_release_lock(dev);
 538
 539 done_nolock:
 540         pm_runtime_mark_last_busy(dev->dev);
 541         pm_runtime_put_autosuspend(dev->dev);
 542
 543         return ret;
 544 }
 545
 546 static const struct i2c_algorithm i2c_dw_algo = {
 547         .master_xfer = i2c_dw_xfer,
 548         .functionality = i2c_dw_func,
 549 };
 550
 551 static const struct i2c_adapter_quirks i2c_dw_quirks = {
 552         .flags = I2C_AQ_NO_ZERO_LEN,
 553 };
 554
 555 static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 556 {
 557         u32 stat, dummy;
 558
 559         /*
 560          * The IC_INTR_STAT register just indicates "enabled" interrupts.
 561          * The unmasked raw version of interrupt status bits is available
 562          * in the IC_RAW_INTR_STAT register.
 563          *
 564          * That is,
 565          *   stat = readl(IC_INTR_STAT);
 566          * equals to,
 567          *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
 568          *
 569          * The raw version might be useful for debugging purposes.
 570          */
 571         regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
 572
 573         /*
 574          * Do not use the IC_CLR_INTR register to clear interrupts, or
 575          * you'll miss some interrupts, triggered during the period from
 576          * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
 577          *
 578          * Instead, use the separately-prepared IC_CLR_* registers.
 579          */
 580         if (stat & DW_IC_INTR_RX_UNDER)
 581                 regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy);
 582         if (stat & DW_IC_INTR_RX_OVER)
 583                 regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy);
 584         if (stat & DW_IC_INTR_TX_OVER)
 585                 regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy);
 586         if (stat & DW_IC_INTR_RD_REQ)
 587                 regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy);
 588         if (stat & DW_IC_INTR_TX_ABRT) {
 589                 /*
 590                  * The IC_TX_ABRT_SOURCE register is cleared whenever
 591                  * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
 592                  */
 593                 regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source);
 594                 regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy);
 595         }
 596         if (stat & DW_IC_INTR_RX_DONE)
 597                 regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy);
 598         if (stat & DW_IC_INTR_ACTIVITY)
 599                 regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy);
 600         if (stat & DW_IC_INTR_STOP_DET)
 601                 regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy);
 602         if (stat & DW_IC_INTR_START_DET)
 603                 regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy);
 604         if (stat & DW_IC_INTR_GEN_CALL)
 605                 regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy);
 606
 607         return stat;
 608 }
 609
 610 /*
 611  * Interrupt service routine. This gets called whenever an I2C master interrupt
 612  * occurs.
 613  */
 614 static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
 615 {
 616         u32 stat;
 617
 618         stat = i2c_dw_read_clear_intrbits(dev);
 619         if (stat & DW_IC_INTR_TX_ABRT) {
 620                 dev->cmd_err |= DW_IC_ERR_TX_ABRT;
 621                 dev->status = STATUS_IDLE;
 622
 623                 /*
 624                  * Anytime TX_ABRT is set, the contents of the tx/rx
 625                  * buffers are flushed. Make sure to skip them.
 626                  */
 627                 regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 628                 goto tx_aborted;
 629         }
 630
 631         if (stat & DW_IC_INTR_RX_FULL)
 632                 i2c_dw_read(dev);
 633
 634         if (stat & DW_IC_INTR_TX_EMPTY)
 635                 i2c_dw_xfer_msg(dev);
 636
 637         /*
 638          * No need to modify or disable the interrupt mask here.
 639          * i2c_dw_xfer_msg() will take care of it according to
 640          * the current transmit status.
 641          */
 642
 643 tx_aborted:
 644         if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
 645                 complete(&dev->cmd_complete);
 646         else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
 647                 /* Workaround to trigger pending interrupt */
 648                 regmap_read(dev->map, DW_IC_INTR_MASK, &stat);
 649                 i2c_dw_disable_int(dev);
 650                 regmap_write(dev->map, DW_IC_INTR_MASK, stat);
 651         }
 652
 653         return 0;
 654 }
 655
 656 static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 657 {
 658         struct dw_i2c_dev *dev = dev_id;
 659         u32 stat, enabled;
 660
 661         regmap_read(dev->map, DW_IC_ENABLE, &enabled);
 662         regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
 663         dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
 664         if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
 665                 return IRQ_NONE;
 666
 667         i2c_dw_irq_handler_master(dev);
 668
 669         return IRQ_HANDLED;
 670 }
 671
 672 void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 673 {
 674         struct i2c_timings *t = &dev->timings;
 675
 676         dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
 677
 678         dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
 679                           DW_IC_CON_RESTART_EN;
 680
 681         dev->mode = DW_IC_MASTER;
 682
 683         switch (t->bus_freq_hz) {
 684         case I2C_MAX_STANDARD_MODE_FREQ:
 685                 dev->master_cfg |= DW_IC_CON_SPEED_STD;
 686                 break;
 687         case I2C_MAX_HIGH_SPEED_MODE_FREQ:
 688                 dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
 689                 break;
 690         default:
 691                 dev->master_cfg |= DW_IC_CON_SPEED_FAST;
 692         }
 693 }
 694 EXPORT_SYMBOL_GPL(i2c_dw_configure_master);
 695
 696 static void i2c_dw_prepare_recovery(struct i2c_adapter *adap)
 697 {
 698         struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 699
 700         i2c_dw_disable(dev);
 701         reset_control_assert(dev->rst);
 702         i2c_dw_prepare_clk(dev, false);
 703 }
 704
 705 static void i2c_dw_unprepare_recovery(struct i2c_adapter *adap)
 706 {
 707         struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 708
 709         i2c_dw_prepare_clk(dev, true);
 710         reset_control_deassert(dev->rst);
 711         i2c_dw_init_master(dev);
 712 }
 713
 714 static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 715 {
 716         struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
 717         struct i2c_adapter *adap = &dev->adapter;
 718         struct gpio_desc *gpio;
 719
 720         gpio = devm_gpiod_get_optional(dev->dev, "scl", GPIOD_OUT_HIGH);
 721         if (IS_ERR_OR_NULL(gpio))
 722                 return PTR_ERR_OR_ZERO(gpio);
 723
 724         rinfo->scl_gpiod = gpio;
 725
 726         gpio = devm_gpiod_get_optional(dev->dev, "sda", GPIOD_IN);
 727         if (IS_ERR(gpio))
 728                 return PTR_ERR(gpio);
 729         rinfo->sda_gpiod = gpio;
 730
 731         rinfo->recover_bus = i2c_generic_scl_recovery;
 732         rinfo->prepare_recovery = i2c_dw_prepare_recovery;
 733         rinfo->unprepare_recovery = i2c_dw_unprepare_recovery;
 734         adap->bus_recovery_info = rinfo;
 735
 736         dev_info(dev->dev, "running with gpio recovery mode! scl%s",
 737                  rinfo->sda_gpiod ? ",sda" : "");
 738
 739         return 0;
 740 }
 741
 742 int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 743 {
 744         struct i2c_adapter *adap = &dev->adapter;
 745         unsigned long irq_flags;
 746         int ret;
 747
 748         init_completion(&dev->cmd_complete);
 749
 750         dev->init = i2c_dw_init_master;
 751         dev->disable = i2c_dw_disable;
 752         dev->disable_int = i2c_dw_disable_int;
 753
 754         ret = i2c_dw_init_regmap(dev);
 755         if (ret)
 756                 return ret;
 757
 758         ret = i2c_dw_set_timings_master(dev);
 759         if (ret)
 760                 return ret;
 761
 762         ret = i2c_dw_set_fifo_size(dev);
 763         if (ret)
 764                 return ret;
 765
 766         ret = dev->init(dev);
 767         if (ret)
 768                 return ret;
 769
 770         snprintf(adap->name, sizeof(adap->name),
 771                  "Synopsys DesignWare I2C adapter");
 772         adap->retries = 3;
 773         adap->algo = &i2c_dw_algo;
 774         adap->quirks = &i2c_dw_quirks;
 775         adap->dev.parent = dev->dev;
 776         i2c_set_adapdata(adap, dev);
 777
 778         if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
 779                 irq_flags = IRQF_NO_SUSPEND;
 780         } else {
 781                 irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
 782         }
 783
 784         i2c_dw_disable_int(dev);
 785         ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
 786                                dev_name(dev->dev), dev);
 787         if (ret) {
 788                 dev_err(dev->dev, "failure requesting irq %i: %d\n",
 789                         dev->irq, ret);
 790                 return ret;
 791         }
 792
 793         ret = i2c_dw_init_recovery_info(dev);
 794         if (ret)
 795                 return ret;
 796
 797         /*
 798          * Increment PM usage count during adapter registration in order to
 799          * avoid possible spurious runtime suspend when adapter device is
 800          * registered to the device core and immediate resume in case bus has
 801          * registered I2C slaves that do I2C transfers in their probe.
 802          */
 803         pm_runtime_get_noresume(dev->dev);
 804         ret = i2c_add_numbered_adapter(adap);
 805         if (ret)
 806                 dev_err(dev->dev, "failure adding adapter: %d\n", ret);
 807         pm_runtime_put_noidle(dev->dev);
 808
 809         return ret;
 810 }
 811 EXPORT_SYMBOL_GPL(i2c_dw_probe_master);
 812
 813 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter");
 814 MODULE_LICENSE("GPL");