GNU Linux-libre 5.19-rc6-gnu
[releases.git] / drivers / hwtracing / coresight / Kconfig
1 # SPDX-License-Identifier: GPL-2.0-only
2 #
3 # Coresight configuration
4 #
5 menuconfig CORESIGHT
6         tristate "CoreSight Tracing Support"
7         depends on ARM || ARM64
8         depends on OF || ACPI
9         select ARM_AMBA
10         select PERF_EVENTS
11         select CONFIGFS_FS
12         help
13           This framework provides a kernel interface for the CoreSight debug
14           and trace drivers to register themselves with. It's intended to build
15           a topological view of the CoreSight components based on a DT
16           specification and configure the right series of components when a
17           trace source gets enabled.
18
19           To compile this driver as a module, choose M here: the
20           module will be called coresight.
21
22 if CORESIGHT
23 config CORESIGHT_LINKS_AND_SINKS
24         tristate "CoreSight Link and Sink drivers"
25         help
26           This enables support for CoreSight link and sink drivers that are
27           responsible for transporting and collecting the trace data
28           respectively.  Link and sinks are dynamically aggregated with a trace
29           entity at run time to form a complete trace path.
30
31           To compile these drivers as modules, choose M here: the
32           modules will be called coresight-funnel and coresight-replicator.
33
34 config CORESIGHT_LINK_AND_SINK_TMC
35         tristate "Coresight generic TMC driver"
36
37         depends on CORESIGHT_LINKS_AND_SINKS
38         help
39           This enables support for the Trace Memory Controller driver.
40           Depending on its configuration the device can act as a link (embedded
41           trace router - ETR) or sink (embedded trace FIFO).  The driver
42           complies with the generic implementation of the component without
43           special enhancement or added features.
44
45           To compile this driver as a module, choose M here: the
46           module will be called coresight-tmc.
47
48 config CORESIGHT_CATU
49         tristate "Coresight Address Translation Unit (CATU) driver"
50         depends on CORESIGHT_LINK_AND_SINK_TMC
51         help
52            Enable support for the Coresight Address Translation Unit (CATU).
53            CATU supports a scatter gather table of 4K pages, with forward/backward
54            lookup. CATU helps TMC ETR to use a large physically non-contiguous trace
55            buffer by translating the addresses used by ETR to the physical address
56            by looking up the provided table. CATU can also be used in pass-through
57            mode where the address is not translated.
58
59            To compile this driver as a module, choose M here: the
60            module will be called coresight-catu.
61
62 config CORESIGHT_SINK_TPIU
63         tristate "Coresight generic TPIU driver"
64         depends on CORESIGHT_LINKS_AND_SINKS
65         help
66           This enables support for the Trace Port Interface Unit driver,
67           responsible for bridging the gap between the on-chip coresight
68           components and a trace for bridging the gap between the on-chip
69           coresight components and a trace port collection engine, typically
70           connected to an external host for use case capturing more traces than
71           the on-board coresight memory can handle.
72
73           To compile this driver as a module, choose M here: the
74           module will be called coresight-tpiu.
75
76 config CORESIGHT_SINK_ETBV10
77         tristate "Coresight ETBv1.0 driver"
78         depends on CORESIGHT_LINKS_AND_SINKS
79         help
80           This enables support for the Embedded Trace Buffer version 1.0 driver
81           that complies with the generic implementation of the component without
82           special enhancement or added features.
83
84           To compile this driver as a module, choose M here: the
85           module will be called coresight-etb10.
86
87 config CORESIGHT_SOURCE_ETM3X
88         tristate "CoreSight Embedded Trace Macrocell 3.x driver"
89         depends on !ARM64
90         select CORESIGHT_LINKS_AND_SINKS
91         help
92           This driver provides support for processor ETM3.x and PTM1.x modules,
93           which allows tracing the instructions that a processor is executing
94           This is primarily useful for instruction level tracing.  Depending
95           the ETM version data tracing may also be available.
96
97           To compile this driver as a module, choose M here: the
98           module will be called coresight-etm3x.
99
100 config CORESIGHT_SOURCE_ETM4X
101         tristate "CoreSight ETMv4.x / ETE driver"
102         depends on ARM64
103         select CORESIGHT_LINKS_AND_SINKS
104         select PID_IN_CONTEXTIDR
105         help
106           This driver provides support for the CoreSight Embedded Trace Macrocell
107           version 4.x and the Embedded Trace Extensions (ETE). Both are CPU tracer
108           modules, tracing the instructions that a processor is executing. This is
109           primarily useful for instruction level tracing.
110
111           To compile this driver as a module, choose M here: the
112           module will be called coresight-etm4x.
113
114 config ETM4X_IMPDEF_FEATURE
115         bool "Control implementation defined overflow support in ETM 4.x driver"
116         depends on CORESIGHT_SOURCE_ETM4X
117         help
118           This control provides implementation define control for CoreSight
119           ETM 4.x tracer module that can't reduce commit rate automatically.
120           This avoids overflow between the ETM tracer module and the cpu core.
121
122 config CORESIGHT_STM
123         tristate "CoreSight System Trace Macrocell driver"
124         depends on (ARM && !(CPU_32v3 || CPU_32v4 || CPU_32v4T)) || ARM64
125         select CORESIGHT_LINKS_AND_SINKS
126         select STM
127         help
128           This driver provides support for hardware assisted software
129           instrumentation based tracing. This is primarily used for
130           logging useful software events or data coming from various entities
131           in the system, possibly running different OSs
132
133           To compile this driver as a module, choose M here: the
134           module will be called coresight-stm.
135
136 config CORESIGHT_CPU_DEBUG
137         tristate "CoreSight CPU Debug driver"
138         depends on ARM || ARM64
139         depends on DEBUG_FS
140         help
141           This driver provides support for coresight debugging module. This
142           is primarily used to dump sample-based profiling registers when
143           system triggers panic, the driver will parse context registers so
144           can quickly get to know program counter (PC), secure state,
145           exception level, etc. Before use debugging functionality, platform
146           needs to ensure the clock domain and power domain are enabled
147           properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst
148           for detailed description and the example for usage.
149
150           To compile this driver as a module, choose M here: the
151           module will be called coresight-cpu-debug.
152
153 config CORESIGHT_CPU_DEBUG_DEFAULT_ON
154         bool "Enable CoreSight CPU Debug by default"
155         depends on CORESIGHT_CPU_DEBUG
156         help
157           Say Y here to enable the CoreSight Debug panic-debug by default. This
158           can also be enabled via debugfs, but this ensures the debug feature
159           is enabled as early as possible.
160
161           Has the same effect as setting coresight_cpu_debug.enable=1 on the
162           kernel command line.
163
164           Say N if unsure.
165
166 config CORESIGHT_CTI
167         tristate "CoreSight Cross Trigger Interface (CTI) driver"
168         depends on ARM || ARM64
169         help
170           This driver provides support for CoreSight CTI and CTM components.
171           These provide hardware triggering events between CoreSight trace
172           source and sink components. These can be used to halt trace or
173           inject events into the trace stream. CTI also provides a software
174           control to trigger the same halt events. This can provide fast trace
175           halt compared to disabling sources and sinks normally in driver
176           software.
177
178           To compile this driver as a module, choose M here: the
179           module will be called coresight-cti.
180
181 config CORESIGHT_CTI_INTEGRATION_REGS
182         bool "Access CTI CoreSight Integration Registers"
183         depends on CORESIGHT_CTI
184         help
185           This option adds support for the CoreSight integration registers on
186           this device. The integration registers allow the exploration of the
187           CTI trigger connections between this and other devices.These
188           registers are not used in normal operation and can leave devices in
189           an inconsistent state.
190
191 config CORESIGHT_TRBE
192         tristate "Trace Buffer Extension (TRBE) driver"
193         depends on ARM64 && CORESIGHT_SOURCE_ETM4X
194         help
195           This driver provides support for percpu Trace Buffer Extension (TRBE).
196           TRBE always needs to be used along with it's corresponding percpu ETE
197           component. ETE generates trace data which is then captured with TRBE.
198           Unlike traditional sink devices, TRBE is a CPU feature accessible via
199           system registers. But it's explicit dependency with trace unit (ETE)
200           requires it to be plugged in as a coresight sink device.
201
202           To compile this driver as a module, choose M here: the module will be
203           called coresight-trbe.
204 endif