drivers/hwmon/pmbus/ucd9000.c

   1 /*
   2  * Hardware monitoring driver for UCD90xxx Sequencer and System Health
   3  * Controller series
   4  *
   5  * Copyright (C) 2011 Ericsson AB.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  */
  21
  22 #include <linux/kernel.h>
  23 #include <linux/module.h>
  24 #include <linux/of_device.h>
  25 #include <linux/init.h>
  26 #include <linux/err.h>
  27 #include <linux/slab.h>
  28 #include <linux/i2c.h>
  29 #include <linux/pmbus.h>
  30 #include "pmbus.h"
  31
  32 enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
  33
  34 #define UCD9000_MONITOR_CONFIG          0xd5
  35 #define UCD9000_NUM_PAGES               0xd6
  36 #define UCD9000_FAN_CONFIG_INDEX        0xe7
  37 #define UCD9000_FAN_CONFIG              0xe8
  38 #define UCD9000_DEVICE_ID               0xfd
  39
  40 #define UCD9000_MON_TYPE(x)     (((x) >> 5) & 0x07)
  41 #define UCD9000_MON_PAGE(x)     ((x) & 0x0f)
  42
  43 #define UCD9000_MON_VOLTAGE     1
  44 #define UCD9000_MON_TEMPERATURE 2
  45 #define UCD9000_MON_CURRENT     3
  46 #define UCD9000_MON_VOLTAGE_HW  4
  47
  48 #define UCD9000_NUM_FAN         4
  49
  50 struct ucd9000_data {
  51         u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
  52         struct pmbus_driver_info info;
  53 };
  54 #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info)
  55
  56 static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
  57 {
  58         int fan_config = 0;
  59         struct ucd9000_data *data
  60           = to_ucd9000_data(pmbus_get_driver_info(client));
  61
  62         if (data->fan_data[fan][3] & 1)
  63                 fan_config |= PB_FAN_2_INSTALLED;   /* Use lower bit position */
  64
  65         /* Pulses/revolution */
  66         fan_config |= (data->fan_data[fan][3] & 0x06) >> 1;
  67
  68         return fan_config;
  69 }
  70
  71 static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg)
  72 {
  73         int ret = 0;
  74         int fan_config;
  75
  76         switch (reg) {
  77         case PMBUS_FAN_CONFIG_12:
  78                 if (page > 0)
  79                         return -ENXIO;
  80
  81                 ret = ucd9000_get_fan_config(client, 0);
  82                 if (ret < 0)
  83                         return ret;
  84                 fan_config = ret << 4;
  85                 ret = ucd9000_get_fan_config(client, 1);
  86                 if (ret < 0)
  87                         return ret;
  88                 fan_config |= ret;
  89                 ret = fan_config;
  90                 break;
  91         case PMBUS_FAN_CONFIG_34:
  92                 if (page > 0)
  93                         return -ENXIO;
  94
  95                 ret = ucd9000_get_fan_config(client, 2);
  96                 if (ret < 0)
  97                         return ret;
  98                 fan_config = ret << 4;
  99                 ret = ucd9000_get_fan_config(client, 3);
 100                 if (ret < 0)
 101                         return ret;
 102                 fan_config |= ret;
 103                 ret = fan_config;
 104                 break;
 105         default:
 106                 ret = -ENODATA;
 107                 break;
 108         }
 109         return ret;
 110 }
 111
 112 static const struct i2c_device_id ucd9000_id[] = {
 113         {"ucd9000", ucd9000},
 114         {"ucd90120", ucd90120},
 115         {"ucd90124", ucd90124},
 116         {"ucd90160", ucd90160},
 117         {"ucd9090", ucd9090},
 118         {"ucd90910", ucd90910},
 119         {}
 120 };
 121 MODULE_DEVICE_TABLE(i2c, ucd9000_id);
 122
 123 static const struct of_device_id ucd9000_of_match[] = {
 124         {
 125                 .compatible = "ti,ucd9000",
 126                 .data = (void *)ucd9000
 127         },
 128         {
 129                 .compatible = "ti,ucd90120",
 130                 .data = (void *)ucd90120
 131         },
 132         {
 133                 .compatible = "ti,ucd90124",
 134                 .data = (void *)ucd90124
 135         },
 136         {
 137                 .compatible = "ti,ucd90160",
 138                 .data = (void *)ucd90160
 139         },
 140         {
 141                 .compatible = "ti,ucd9090",
 142                 .data = (void *)ucd9090
 143         },
 144         {
 145                 .compatible = "ti,ucd90910",
 146                 .data = (void *)ucd90910
 147         },
 148         { },
 149 };
 150 MODULE_DEVICE_TABLE(of, ucd9000_of_match);
 151
 152 static int ucd9000_probe(struct i2c_client *client,
 153                          const struct i2c_device_id *id)
 154 {
 155         u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
 156         struct ucd9000_data *data;
 157         struct pmbus_driver_info *info;
 158         const struct i2c_device_id *mid;
 159         enum chips chip;
 160         int i, ret;
 161
 162         if (!i2c_check_functionality(client->adapter,
 163                                      I2C_FUNC_SMBUS_BYTE_DATA |
 164                                      I2C_FUNC_SMBUS_BLOCK_DATA))
 165                 return -ENODEV;
 166
 167         ret = i2c_smbus_read_block_data(client, UCD9000_DEVICE_ID,
 168                                         block_buffer);
 169         if (ret < 0) {
 170                 dev_err(&client->dev, "Failed to read device ID\n");
 171                 return ret;
 172         }
 173         block_buffer[ret] = '\0';
 174         dev_info(&client->dev, "Device ID %s\n", block_buffer);
 175
 176         for (mid = ucd9000_id; mid->name[0]; mid++) {
 177                 if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
 178                         break;
 179         }
 180         if (!mid->name[0]) {
 181                 dev_err(&client->dev, "Unsupported device\n");
 182                 return -ENODEV;
 183         }
 184
 185         if (client->dev.of_node)
 186                 chip = (enum chips)of_device_get_match_data(&client->dev);
 187         else
 188                 chip = id->driver_data;
 189
 190         if (chip != ucd9000 && chip != mid->driver_data)
 191                 dev_notice(&client->dev,
 192                            "Device mismatch: Configured %s, detected %s\n",
 193                            id->name, mid->name);
 194
 195         data = devm_kzalloc(&client->dev, sizeof(struct ucd9000_data),
 196                             GFP_KERNEL);
 197         if (!data)
 198                 return -ENOMEM;
 199         info = &data->info;
 200
 201         ret = i2c_smbus_read_byte_data(client, UCD9000_NUM_PAGES);
 202         if (ret < 0) {
 203                 dev_err(&client->dev,
 204                         "Failed to read number of active pages\n");
 205                 return ret;
 206         }
 207         info->pages = ret;
 208         if (!info->pages) {
 209                 dev_err(&client->dev, "No pages configured\n");
 210                 return -ENODEV;
 211         }
 212
 213         /* The internal temperature sensor is always active */
 214         info->func[0] = PMBUS_HAVE_TEMP;
 215
 216         /* Everything else is configurable */
 217         ret = i2c_smbus_read_block_data(client, UCD9000_MONITOR_CONFIG,
 218                                         block_buffer);
 219         if (ret <= 0) {
 220                 dev_err(&client->dev, "Failed to read configuration data\n");
 221                 return -ENODEV;
 222         }
 223         for (i = 0; i < ret; i++) {
 224                 int page = UCD9000_MON_PAGE(block_buffer[i]);
 225
 226                 if (page >= info->pages)
 227                         continue;
 228
 229                 switch (UCD9000_MON_TYPE(block_buffer[i])) {
 230                 case UCD9000_MON_VOLTAGE:
 231                 case UCD9000_MON_VOLTAGE_HW:
 232                         info->func[page] |= PMBUS_HAVE_VOUT
 233                           | PMBUS_HAVE_STATUS_VOUT;
 234                         break;
 235                 case UCD9000_MON_TEMPERATURE:
 236                         info->func[page] |= PMBUS_HAVE_TEMP2
 237                           | PMBUS_HAVE_STATUS_TEMP;
 238                         break;
 239                 case UCD9000_MON_CURRENT:
 240                         info->func[page] |= PMBUS_HAVE_IOUT
 241                           | PMBUS_HAVE_STATUS_IOUT;
 242                         break;
 243                 default:
 244                         break;
 245                 }
 246         }
 247
 248         /* Fan configuration */
 249         if (mid->driver_data == ucd90124) {
 250                 for (i = 0; i < UCD9000_NUM_FAN; i++) {
 251                         i2c_smbus_write_byte_data(client,
 252                                                   UCD9000_FAN_CONFIG_INDEX, i);
 253                         ret = i2c_smbus_read_block_data(client,
 254                                                         UCD9000_FAN_CONFIG,
 255                                                         data->fan_data[i]);
 256                         if (ret < 0)
 257                                 return ret;
 258                 }
 259                 i2c_smbus_write_byte_data(client, UCD9000_FAN_CONFIG_INDEX, 0);
 260
 261                 info->read_byte_data = ucd9000_read_byte_data;
 262                 info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12
 263                   | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34;
 264         }
 265
 266         return pmbus_do_probe(client, mid, info);
 267 }
 268
 269 /* This is the driver that will be inserted */
 270 static struct i2c_driver ucd9000_driver = {
 271         .driver = {
 272                 .name = "ucd9000",
 273                 .of_match_table = of_match_ptr(ucd9000_of_match),
 274         },
 275         .probe = ucd9000_probe,
 276         .remove = pmbus_do_remove,
 277         .id_table = ucd9000_id,
 278 };
 279
 280 module_i2c_driver(ucd9000_driver);
 281
 282 MODULE_AUTHOR("Guenter Roeck");
 283 MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx");
 284 MODULE_LICENSE("GPL");