drivers/hid/intel-ish-hid/ipc/ipc.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * H/W layer of ISHTP provider device (ISH)
   4  *
   5  * Copyright (c) 2014-2016, Intel Corporation.
   6  */
   7
   8 #include <linux/sched.h>
   9 #include <linux/spinlock.h>
  10 #include <linux/delay.h>
  11 #include <linux/jiffies.h>
  12 #include "client.h"
  13 #include "hw-ish.h"
  14 #include "hbm.h"
  15
  16 /* For FW reset flow */
  17 static struct work_struct fw_reset_work;
  18 static struct ishtp_device *ishtp_dev;
  19
  20 /**
  21  * ish_reg_read() - Read register
  22  * @dev: ISHTP device pointer
  23  * @offset: Register offset
  24  *
  25  * Read 32 bit register at a given offset
  26  *
  27  * Return: Read register value
  28  */
  29 static inline uint32_t ish_reg_read(const struct ishtp_device *dev,
  30         unsigned long offset)
  31 {
  32         struct ish_hw *hw = to_ish_hw(dev);
  33
  34         return readl(hw->mem_addr + offset);
  35 }
  36
  37 /**
  38  * ish_reg_write() - Write register
  39  * @dev: ISHTP device pointer
  40  * @offset: Register offset
  41  * @value: Value to write
  42  *
  43  * Writes 32 bit register at a give offset
  44  */
  45 static inline void ish_reg_write(struct ishtp_device *dev,
  46                                  unsigned long offset,
  47                                  uint32_t value)
  48 {
  49         struct ish_hw *hw = to_ish_hw(dev);
  50
  51         writel(value, hw->mem_addr + offset);
  52 }
  53
  54 /**
  55  * _ish_read_fw_sts_reg() - Read FW status register
  56  * @dev: ISHTP device pointer
  57  *
  58  * Read FW status register
  59  *
  60  * Return: Read register value
  61  */
  62 static inline uint32_t _ish_read_fw_sts_reg(struct ishtp_device *dev)
  63 {
  64         return ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
  65 }
  66
  67 /**
  68  * check_generated_interrupt() - Check if ISH interrupt
  69  * @dev: ISHTP device pointer
  70  *
  71  * Check if an interrupt was generated for ISH
  72  *
  73  * Return: Read true or false
  74  */
  75 static bool check_generated_interrupt(struct ishtp_device *dev)
  76 {
  77         bool interrupt_generated = true;
  78         uint32_t pisr_val = 0;
  79
  80         if (dev->pdev->device == CHV_DEVICE_ID) {
  81                 pisr_val = ish_reg_read(dev, IPC_REG_PISR_CHV_AB);
  82                 interrupt_generated =
  83                         IPC_INT_FROM_ISH_TO_HOST_CHV_AB(pisr_val);
  84         } else {
  85                 pisr_val = ish_reg_read(dev, IPC_REG_PISR_BXT);
  86                 interrupt_generated = !!pisr_val;
  87                 /* only busy-clear bit is RW, others are RO */
  88                 if (pisr_val)
  89                         ish_reg_write(dev, IPC_REG_PISR_BXT, pisr_val);
  90         }
  91
  92         return interrupt_generated;
  93 }
  94
  95 /**
  96  * ish_is_input_ready() - Check if FW ready for RX
  97  * @dev: ISHTP device pointer
  98  *
  99  * Check if ISH FW is ready for receiving data
 100  *
 101  * Return: Read true or false
 102  */
 103 static bool ish_is_input_ready(struct ishtp_device *dev)
 104 {
 105         uint32_t doorbell_val;
 106
 107         doorbell_val = ish_reg_read(dev, IPC_REG_HOST2ISH_DRBL);
 108         return !IPC_IS_BUSY(doorbell_val);
 109 }
 110
 111 /**
 112  * set_host_ready() - Indicate host ready
 113  * @dev: ISHTP device pointer
 114  *
 115  * Set host ready indication to FW
 116  */
 117 static void set_host_ready(struct ishtp_device *dev)
 118 {
 119         if (dev->pdev->device == CHV_DEVICE_ID) {
 120                 if (dev->pdev->revision == REVISION_ID_CHT_A0 ||
 121                                 (dev->pdev->revision & REVISION_ID_SI_MASK) ==
 122                                 REVISION_ID_CHT_Ax_SI)
 123                         ish_reg_write(dev, IPC_REG_HOST_COMM, 0x81);
 124                 else if (dev->pdev->revision == REVISION_ID_CHT_B0 ||
 125                                 (dev->pdev->revision & REVISION_ID_SI_MASK) ==
 126                                 REVISION_ID_CHT_Bx_SI ||
 127                                 (dev->pdev->revision & REVISION_ID_SI_MASK) ==
 128                                 REVISION_ID_CHT_Kx_SI ||
 129                                 (dev->pdev->revision & REVISION_ID_SI_MASK) ==
 130                                 REVISION_ID_CHT_Dx_SI) {
 131                         uint32_t host_comm_val;
 132
 133                         host_comm_val = ish_reg_read(dev, IPC_REG_HOST_COMM);
 134                         host_comm_val |= IPC_HOSTCOMM_INT_EN_BIT_CHV_AB | 0x81;
 135                         ish_reg_write(dev, IPC_REG_HOST_COMM, host_comm_val);
 136                 }
 137         } else {
 138                         uint32_t host_pimr_val;
 139
 140                         host_pimr_val = ish_reg_read(dev, IPC_REG_PIMR_BXT);
 141                         host_pimr_val |= IPC_PIMR_INT_EN_BIT_BXT;
 142                         /*
 143                          * disable interrupt generated instead of
 144                          * RX_complete_msg
 145                          */
 146                         host_pimr_val &= ~IPC_HOST2ISH_BUSYCLEAR_MASK_BIT;
 147
 148                         ish_reg_write(dev, IPC_REG_PIMR_BXT, host_pimr_val);
 149         }
 150 }
 151
 152 /**
 153  * ishtp_fw_is_ready() - Check if FW ready
 154  * @dev: ISHTP device pointer
 155  *
 156  * Check if ISH FW is ready
 157  *
 158  * Return: Read true or false
 159  */
 160 static bool ishtp_fw_is_ready(struct ishtp_device *dev)
 161 {
 162         uint32_t ish_status = _ish_read_fw_sts_reg(dev);
 163
 164         return IPC_IS_ISH_ILUP(ish_status) &&
 165                 IPC_IS_ISH_ISHTP_READY(ish_status);
 166 }
 167
 168 /**
 169  * ish_set_host_rdy() - Indicate host ready
 170  * @dev: ISHTP device pointer
 171  *
 172  * Set host ready indication to FW
 173  */
 174 static void ish_set_host_rdy(struct ishtp_device *dev)
 175 {
 176         uint32_t host_status = ish_reg_read(dev, IPC_REG_HOST_COMM);
 177
 178         IPC_SET_HOST_READY(host_status);
 179         ish_reg_write(dev, IPC_REG_HOST_COMM, host_status);
 180 }
 181
 182 /**
 183  * ish_clr_host_rdy() - Indicate host not ready
 184  * @dev: ISHTP device pointer
 185  *
 186  * Send host not ready indication to FW
 187  */
 188 static void ish_clr_host_rdy(struct ishtp_device *dev)
 189 {
 190         uint32_t host_status = ish_reg_read(dev, IPC_REG_HOST_COMM);
 191
 192         IPC_CLEAR_HOST_READY(host_status);
 193         ish_reg_write(dev, IPC_REG_HOST_COMM, host_status);
 194 }
 195
 196 /**
 197  * _ishtp_read_hdr() - Read message header
 198  * @dev: ISHTP device pointer
 199  *
 200  * Read header of 32bit length
 201  *
 202  * Return: Read register value
 203  */
 204 static uint32_t _ishtp_read_hdr(const struct ishtp_device *dev)
 205 {
 206         return ish_reg_read(dev, IPC_REG_ISH2HOST_MSG);
 207 }
 208
 209 /**
 210  * _ishtp_read - Read message
 211  * @dev: ISHTP device pointer
 212  * @buffer: message buffer
 213  * @buffer_length: length of message buffer
 214  *
 215  * Read message from FW
 216  *
 217  * Return: Always 0
 218  */
 219 static int _ishtp_read(struct ishtp_device *dev, unsigned char *buffer,
 220         unsigned long buffer_length)
 221 {
 222         uint32_t        i;
 223         uint32_t        *r_buf = (uint32_t *)buffer;
 224         uint32_t        msg_offs;
 225
 226         msg_offs = IPC_REG_ISH2HOST_MSG + sizeof(struct ishtp_msg_hdr);
 227         for (i = 0; i < buffer_length; i += sizeof(uint32_t))
 228                 *r_buf++ = ish_reg_read(dev, msg_offs + i);
 229
 230         return 0;
 231 }
 232
 233 /**
 234  * write_ipc_from_queue() - try to write ipc msg from Tx queue to device
 235  * @dev: ishtp device pointer
 236  *
 237  * Check if DRBL is cleared. if it is - write the first IPC msg,  then call
 238  * the callback function (unless it's NULL)
 239  *
 240  * Return: 0 for success else failure code
 241  */
 242 static int write_ipc_from_queue(struct ishtp_device *dev)
 243 {
 244         struct wr_msg_ctl_info  *ipc_link;
 245         unsigned long   length;
 246         unsigned long   rem;
 247         unsigned long   flags;
 248         uint32_t        doorbell_val;
 249         uint32_t        *r_buf;
 250         uint32_t        reg_addr;
 251         int     i;
 252         void    (*ipc_send_compl)(void *);
 253         void    *ipc_send_compl_prm;
 254
 255         if (dev->dev_state == ISHTP_DEV_DISABLED)
 256                 return -EINVAL;
 257
 258         spin_lock_irqsave(&dev->wr_processing_spinlock, flags);
 259         if (!ish_is_input_ready(dev)) {
 260                 spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
 261                 return -EBUSY;
 262         }
 263
 264         /*
 265          * if tx send list is empty - return 0;
 266          * may happen, as RX_COMPLETE handler doesn't check list emptiness.
 267          */
 268         if (list_empty(&dev->wr_processing_list)) {
 269                 spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
 270                 return  0;
 271         }
 272
 273         ipc_link = list_first_entry(&dev->wr_processing_list,
 274                                     struct wr_msg_ctl_info, link);
 275         /* first 4 bytes of the data is the doorbell value (IPC header) */
 276         length = ipc_link->length - sizeof(uint32_t);
 277         doorbell_val = *(uint32_t *)ipc_link->inline_data;
 278         r_buf = (uint32_t *)(ipc_link->inline_data + sizeof(uint32_t));
 279
 280         /* If sending MNG_SYNC_FW_CLOCK, update clock again */
 281         if (IPC_HEADER_GET_PROTOCOL(doorbell_val) == IPC_PROTOCOL_MNG &&
 282                 IPC_HEADER_GET_MNG_CMD(doorbell_val) == MNG_SYNC_FW_CLOCK) {
 283                 uint64_t usec_system, usec_utc;
 284                 struct ipc_time_update_msg time_update;
 285                 struct time_sync_format ts_format;
 286
 287                 usec_system = ktime_to_us(ktime_get_boottime());
 288                 usec_utc = ktime_to_us(ktime_get_real());
 289                 ts_format.ts1_source = HOST_SYSTEM_TIME_USEC;
 290                 ts_format.ts2_source = HOST_UTC_TIME_USEC;
 291                 ts_format.reserved = 0;
 292
 293                 time_update.primary_host_time = usec_system;
 294                 time_update.secondary_host_time = usec_utc;
 295                 time_update.sync_info = ts_format;
 296
 297                 memcpy(r_buf, &time_update,
 298                        sizeof(struct ipc_time_update_msg));
 299         }
 300
 301         for (i = 0, reg_addr = IPC_REG_HOST2ISH_MSG; i < length >> 2; i++,
 302                         reg_addr += 4)
 303                 ish_reg_write(dev, reg_addr, r_buf[i]);
 304
 305         rem = length & 0x3;
 306         if (rem > 0) {
 307                 uint32_t reg = 0;
 308
 309                 memcpy(&reg, &r_buf[length >> 2], rem);
 310                 ish_reg_write(dev, reg_addr, reg);
 311         }
 312         ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, doorbell_val);
 313
 314         /* Flush writes to msg registers and doorbell */
 315         ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
 316
 317         /* Update IPC counters */
 318         ++dev->ipc_tx_cnt;
 319         dev->ipc_tx_bytes_cnt += IPC_HEADER_GET_LENGTH(doorbell_val);
 320
 321         ipc_send_compl = ipc_link->ipc_send_compl;
 322         ipc_send_compl_prm = ipc_link->ipc_send_compl_prm;
 323         list_del_init(&ipc_link->link);
 324         list_add(&ipc_link->link, &dev->wr_free_list);
 325         spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
 326
 327         /*
 328          * callback will be called out of spinlock,
 329          * after ipc_link returned to free list
 330          */
 331         if (ipc_send_compl)
 332                 ipc_send_compl(ipc_send_compl_prm);
 333
 334         return 0;
 335 }
 336
 337 /**
 338  * write_ipc_to_queue() - write ipc msg to Tx queue
 339  * @dev: ishtp device instance
 340  * @ipc_send_compl: Send complete callback
 341  * @ipc_send_compl_prm: Parameter to send in complete callback
 342  * @msg: Pointer to message
 343  * @length: Length of message
 344  *
 345  * Recived msg with IPC (and upper protocol) header  and add it to the device
 346  *  Tx-to-write list then try to send the first IPC waiting msg
 347  *  (if DRBL is cleared)
 348  * This function returns negative value for failure (means free list
 349  *  is empty, or msg too long) and 0 for success.
 350  *
 351  * Return: 0 for success else failure code
 352  */
 353 static int write_ipc_to_queue(struct ishtp_device *dev,
 354         void (*ipc_send_compl)(void *), void *ipc_send_compl_prm,
 355         unsigned char *msg, int length)
 356 {
 357         struct wr_msg_ctl_info *ipc_link;
 358         unsigned long flags;
 359
 360         if (length > IPC_FULL_MSG_SIZE)
 361                 return -EMSGSIZE;
 362
 363         spin_lock_irqsave(&dev->wr_processing_spinlock, flags);
 364         if (list_empty(&dev->wr_free_list)) {
 365                 spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
 366                 return -ENOMEM;
 367         }
 368         ipc_link = list_first_entry(&dev->wr_free_list,
 369                                     struct wr_msg_ctl_info, link);
 370         list_del_init(&ipc_link->link);
 371
 372         ipc_link->ipc_send_compl = ipc_send_compl;
 373         ipc_link->ipc_send_compl_prm = ipc_send_compl_prm;
 374         ipc_link->length = length;
 375         memcpy(ipc_link->inline_data, msg, length);
 376
 377         list_add_tail(&ipc_link->link, &dev->wr_processing_list);
 378         spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
 379
 380         write_ipc_from_queue(dev);
 381
 382         return 0;
 383 }
 384
 385 /**
 386  * ipc_send_mng_msg() - Send management message
 387  * @dev: ishtp device instance
 388  * @msg_code: Message code
 389  * @msg: Pointer to message
 390  * @size: Length of message
 391  *
 392  * Send management message to FW
 393  *
 394  * Return: 0 for success else failure code
 395  */
 396 static int ipc_send_mng_msg(struct ishtp_device *dev, uint32_t msg_code,
 397         void *msg, size_t size)
 398 {
 399         unsigned char   ipc_msg[IPC_FULL_MSG_SIZE];
 400         uint32_t        drbl_val = IPC_BUILD_MNG_MSG(msg_code, size);
 401
 402         memcpy(ipc_msg, &drbl_val, sizeof(uint32_t));
 403         memcpy(ipc_msg + sizeof(uint32_t), msg, size);
 404         return  write_ipc_to_queue(dev, NULL, NULL, ipc_msg,
 405                 sizeof(uint32_t) + size);
 406 }
 407
 408 #define WAIT_FOR_FW_RDY                 0x1
 409 #define WAIT_FOR_INPUT_RDY              0x2
 410
 411 /**
 412  * timed_wait_for_timeout() - wait special event with timeout
 413  * @dev: ISHTP device pointer
 414  * @condition: indicate the condition for waiting
 415  * @timeinc: time slice for every wait cycle, in ms
 416  * @timeout: time in ms for timeout
 417  *
 418  * This function will check special event to be ready in a loop, the loop
 419  * period is specificd in timeinc. Wait timeout will causes failure.
 420  *
 421  * Return: 0 for success else failure code
 422  */
 423 static int timed_wait_for_timeout(struct ishtp_device *dev, int condition,
 424                                 unsigned int timeinc, unsigned int timeout)
 425 {
 426         bool complete = false;
 427         int ret;
 428
 429         do {
 430                 if (condition == WAIT_FOR_FW_RDY) {
 431                         complete = ishtp_fw_is_ready(dev);
 432                 } else if (condition == WAIT_FOR_INPUT_RDY) {
 433                         complete = ish_is_input_ready(dev);
 434                 } else {
 435                         ret = -EINVAL;
 436                         goto out;
 437                 }
 438
 439                 if (!complete) {
 440                         unsigned long left_time;
 441
 442                         left_time = msleep_interruptible(timeinc);
 443                         timeout -= (timeinc - left_time);
 444                 }
 445         } while (!complete && timeout > 0);
 446
 447         if (complete)
 448                 ret = 0;
 449         else
 450                 ret = -EBUSY;
 451
 452 out:
 453         return ret;
 454 }
 455
 456 #define TIME_SLICE_FOR_FW_RDY_MS                100
 457 #define TIME_SLICE_FOR_INPUT_RDY_MS             100
 458 #define TIMEOUT_FOR_FW_RDY_MS                   2000
 459 #define TIMEOUT_FOR_INPUT_RDY_MS                2000
 460
 461 /**
 462  * ish_fw_reset_handler() - FW reset handler
 463  * @dev: ishtp device pointer
 464  *
 465  * Handle FW reset
 466  *
 467  * Return: 0 for success else failure code
 468  */
 469 static int ish_fw_reset_handler(struct ishtp_device *dev)
 470 {
 471         uint32_t        reset_id;
 472         unsigned long   flags;
 473
 474         /* Read reset ID */
 475         reset_id = ish_reg_read(dev, IPC_REG_ISH2HOST_MSG) & 0xFFFF;
 476
 477         /* Clear IPC output queue */
 478         spin_lock_irqsave(&dev->wr_processing_spinlock, flags);
 479         list_splice_init(&dev->wr_processing_list, &dev->wr_free_list);
 480         spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
 481
 482         /* ISHTP notification in IPC_RESET */
 483         ishtp_reset_handler(dev);
 484
 485         if (!ish_is_input_ready(dev))
 486                 timed_wait_for_timeout(dev, WAIT_FOR_INPUT_RDY,
 487                         TIME_SLICE_FOR_INPUT_RDY_MS, TIMEOUT_FOR_INPUT_RDY_MS);
 488
 489         /* ISH FW is dead */
 490         if (!ish_is_input_ready(dev))
 491                 return  -EPIPE;
 492         /*
 493          * Set HOST2ISH.ILUP. Apparently we need this BEFORE sending
 494          * RESET_NOTIFY_ACK - FW will be checking for it
 495          */
 496         ish_set_host_rdy(dev);
 497         /* Send RESET_NOTIFY_ACK (with reset_id) */
 498         ipc_send_mng_msg(dev, MNG_RESET_NOTIFY_ACK, &reset_id,
 499                          sizeof(uint32_t));
 500
 501         /* Wait for ISH FW'es ILUP and ISHTP_READY */
 502         timed_wait_for_timeout(dev, WAIT_FOR_FW_RDY,
 503                         TIME_SLICE_FOR_FW_RDY_MS, TIMEOUT_FOR_FW_RDY_MS);
 504         if (!ishtp_fw_is_ready(dev)) {
 505                 /* ISH FW is dead */
 506                 uint32_t        ish_status;
 507
 508                 ish_status = _ish_read_fw_sts_reg(dev);
 509                 dev_err(dev->devc,
 510                         "[ishtp-ish]: completed reset, ISH is dead (FWSTS = %08X)\n",
 511                         ish_status);
 512                 return -ENODEV;
 513         }
 514         return  0;
 515 }
 516
 517 #define TIMEOUT_FOR_HW_RDY_MS                   300
 518
 519 /**
 520  * ish_fw_reset_work_fn() - FW reset worker function
 521  * @unused: not used
 522  *
 523  * Call ish_fw_reset_handler to complete FW reset
 524  */
 525 static void fw_reset_work_fn(struct work_struct *unused)
 526 {
 527         int     rv;
 528
 529         rv = ish_fw_reset_handler(ishtp_dev);
 530         if (!rv) {
 531                 /* ISH is ILUP & ISHTP-ready. Restart ISHTP */
 532                 msleep_interruptible(TIMEOUT_FOR_HW_RDY_MS);
 533                 ishtp_dev->recvd_hw_ready = 1;
 534                 wake_up_interruptible(&ishtp_dev->wait_hw_ready);
 535
 536                 /* ISHTP notification in IPC_RESET sequence completion */
 537                 ishtp_reset_compl_handler(ishtp_dev);
 538         } else
 539                 dev_err(ishtp_dev->devc, "[ishtp-ish]: FW reset failed (%d)\n",
 540                         rv);
 541 }
 542
 543 /**
 544  * _ish_sync_fw_clock() -Sync FW clock with the OS clock
 545  * @dev: ishtp device pointer
 546  *
 547  * Sync FW and OS time
 548  */
 549 static void _ish_sync_fw_clock(struct ishtp_device *dev)
 550 {
 551         static unsigned long    prev_sync;
 552         uint64_t        usec;
 553
 554         if (prev_sync && jiffies - prev_sync < 20 * HZ)
 555                 return;
 556
 557         prev_sync = jiffies;
 558         usec = ktime_to_us(ktime_get_boottime());
 559         ipc_send_mng_msg(dev, MNG_SYNC_FW_CLOCK, &usec, sizeof(uint64_t));
 560 }
 561
 562 /**
 563  * recv_ipc() - Receive and process IPC management messages
 564  * @dev: ishtp device instance
 565  * @doorbell_val: doorbell value
 566  *
 567  * This function runs in ISR context.
 568  * NOTE: Any other mng command than reset_notify and reset_notify_ack
 569  * won't wake BH handler
 570  */
 571 static void     recv_ipc(struct ishtp_device *dev, uint32_t doorbell_val)
 572 {
 573         uint32_t        mng_cmd;
 574
 575         mng_cmd = IPC_HEADER_GET_MNG_CMD(doorbell_val);
 576
 577         switch (mng_cmd) {
 578         default:
 579                 break;
 580
 581         case MNG_RX_CMPL_INDICATION:
 582                 if (dev->suspend_flag) {
 583                         dev->suspend_flag = 0;
 584                         wake_up_interruptible(&dev->suspend_wait);
 585                 }
 586                 if (dev->resume_flag) {
 587                         dev->resume_flag = 0;
 588                         wake_up_interruptible(&dev->resume_wait);
 589                 }
 590
 591                 write_ipc_from_queue(dev);
 592                 break;
 593
 594         case MNG_RESET_NOTIFY:
 595                 if (!ishtp_dev) {
 596                         ishtp_dev = dev;
 597                         INIT_WORK(&fw_reset_work, fw_reset_work_fn);
 598                 }
 599                 schedule_work(&fw_reset_work);
 600                 break;
 601
 602         case MNG_RESET_NOTIFY_ACK:
 603                 dev->recvd_hw_ready = 1;
 604                 wake_up_interruptible(&dev->wait_hw_ready);
 605                 break;
 606         }
 607 }
 608
 609 /**
 610  * ish_irq_handler() - ISH IRQ handler
 611  * @irq: irq number
 612  * @dev_id: ishtp device pointer
 613  *
 614  * ISH IRQ handler. If interrupt is generated and is for ISH it will process
 615  * the interrupt.
 616  */
 617 irqreturn_t ish_irq_handler(int irq, void *dev_id)
 618 {
 619         struct ishtp_device     *dev = dev_id;
 620         uint32_t        doorbell_val;
 621         bool    interrupt_generated;
 622
 623         /* Check that it's interrupt from ISH (may be shared) */
 624         interrupt_generated = check_generated_interrupt(dev);
 625
 626         if (!interrupt_generated)
 627                 return IRQ_NONE;
 628
 629         doorbell_val = ish_reg_read(dev, IPC_REG_ISH2HOST_DRBL);
 630         if (!IPC_IS_BUSY(doorbell_val))
 631                 return IRQ_HANDLED;
 632
 633         if (dev->dev_state == ISHTP_DEV_DISABLED)
 634                 return  IRQ_HANDLED;
 635
 636         /* Sanity check: IPC dgram length in header */
 637         if (IPC_HEADER_GET_LENGTH(doorbell_val) > IPC_PAYLOAD_SIZE) {
 638                 dev_err(dev->devc,
 639                         "IPC hdr - bad length: %u; dropped\n",
 640                         (unsigned int)IPC_HEADER_GET_LENGTH(doorbell_val));
 641                 goto    eoi;
 642         }
 643
 644         switch (IPC_HEADER_GET_PROTOCOL(doorbell_val)) {
 645         default:
 646                 break;
 647         case IPC_PROTOCOL_MNG:
 648                 recv_ipc(dev, doorbell_val);
 649                 break;
 650         case IPC_PROTOCOL_ISHTP:
 651                 ishtp_recv(dev);
 652                 break;
 653         }
 654
 655 eoi:
 656         /* Update IPC counters */
 657         ++dev->ipc_rx_cnt;
 658         dev->ipc_rx_bytes_cnt += IPC_HEADER_GET_LENGTH(doorbell_val);
 659
 660         ish_reg_write(dev, IPC_REG_ISH2HOST_DRBL, 0);
 661         /* Flush write to doorbell */
 662         ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
 663
 664         return  IRQ_HANDLED;
 665 }
 666
 667 /**
 668  * ish_disable_dma() - disable dma communication between host and ISHFW
 669  * @dev: ishtp device pointer
 670  *
 671  * Clear the dma enable bit and wait for dma inactive.
 672  *
 673  * Return: 0 for success else error code.
 674  */
 675 int ish_disable_dma(struct ishtp_device *dev)
 676 {
 677         unsigned int    dma_delay;
 678
 679         /* Clear the dma enable bit */
 680         ish_reg_write(dev, IPC_REG_ISH_RMP2, 0);
 681
 682         /* wait for dma inactive */
 683         for (dma_delay = 0; dma_delay < MAX_DMA_DELAY &&
 684                 _ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA);
 685                 dma_delay += 5)
 686                 mdelay(5);
 687
 688         if (dma_delay >= MAX_DMA_DELAY) {
 689                 dev_err(dev->devc,
 690                         "Wait for DMA inactive timeout\n");
 691                 return  -EBUSY;
 692         }
 693
 694         return 0;
 695 }
 696
 697 /**
 698  * ish_wakeup() - wakeup ishfw from waiting-for-host state
 699  * @dev: ishtp device pointer
 700  *
 701  * Set the dma enable bit and send a void message to FW,
 702  * it wil wakeup FW from waiting-for-host state.
 703  */
 704 static void ish_wakeup(struct ishtp_device *dev)
 705 {
 706         /* Set dma enable bit */
 707         ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED);
 708
 709         /*
 710          * Send 0 IPC message so that ISH FW wakes up if it was already
 711          * asleep.
 712          */
 713         ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT);
 714
 715         /* Flush writes to doorbell and REMAP2 */
 716         ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
 717 }
 718
 719 /**
 720  * _ish_hw_reset() - HW reset
 721  * @dev: ishtp device pointer
 722  *
 723  * Reset ISH HW to recover if any error
 724  *
 725  * Return: 0 for success else error fault code
 726  */
 727 static int _ish_hw_reset(struct ishtp_device *dev)
 728 {
 729         struct pci_dev *pdev = dev->pdev;
 730         int     rv;
 731         uint16_t csr;
 732
 733         if (!pdev)
 734                 return  -ENODEV;
 735
 736         rv = pci_reset_function(pdev);
 737         if (!rv)
 738                 dev->dev_state = ISHTP_DEV_RESETTING;
 739
 740         if (!pdev->pm_cap) {
 741                 dev_err(&pdev->dev, "Can't reset - no PM caps\n");
 742                 return  -EINVAL;
 743         }
 744
 745         /* Disable dma communication between FW and host */
 746         if (ish_disable_dma(dev)) {
 747                 dev_err(&pdev->dev,
 748                         "Can't reset - stuck with DMA in-progress\n");
 749                 return  -EBUSY;
 750         }
 751
 752         pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &csr);
 753
 754         csr &= ~PCI_PM_CTRL_STATE_MASK;
 755         csr |= PCI_D3hot;
 756         pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr);
 757
 758         mdelay(pdev->d3hot_delay);
 759
 760         csr &= ~PCI_PM_CTRL_STATE_MASK;
 761         csr |= PCI_D0;
 762         pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr);
 763
 764         /* Now we can enable ISH DMA operation and wakeup ISHFW */
 765         ish_wakeup(dev);
 766
 767         return  0;
 768 }
 769
 770 /**
 771  * _ish_ipc_reset() - IPC reset
 772  * @dev: ishtp device pointer
 773  *
 774  * Resets host and fw IPC and upper layers
 775  *
 776  * Return: 0 for success else error fault code
 777  */
 778 static int _ish_ipc_reset(struct ishtp_device *dev)
 779 {
 780         struct ipc_rst_payload_type ipc_mng_msg;
 781         int     rv = 0;
 782
 783         ipc_mng_msg.reset_id = 1;
 784         ipc_mng_msg.reserved = 0;
 785
 786         set_host_ready(dev);
 787
 788         /* Clear the incoming doorbell */
 789         ish_reg_write(dev, IPC_REG_ISH2HOST_DRBL, 0);
 790         /* Flush write to doorbell */
 791         ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
 792
 793         dev->recvd_hw_ready = 0;
 794
 795         /* send message */
 796         rv = ipc_send_mng_msg(dev, MNG_RESET_NOTIFY, &ipc_mng_msg,
 797                 sizeof(struct ipc_rst_payload_type));
 798         if (rv) {
 799                 dev_err(dev->devc, "Failed to send IPC MNG_RESET_NOTIFY\n");
 800                 return  rv;
 801         }
 802
 803         wait_event_interruptible_timeout(dev->wait_hw_ready,
 804                                          dev->recvd_hw_ready, 2 * HZ);
 805         if (!dev->recvd_hw_ready) {
 806                 dev_err(dev->devc, "Timed out waiting for HW ready\n");
 807                 rv = -ENODEV;
 808         }
 809
 810         return rv;
 811 }
 812
 813 /**
 814  * ish_hw_start() -Start ISH HW
 815  * @dev: ishtp device pointer
 816  *
 817  * Set host to ready state and wait for FW reset
 818  *
 819  * Return: 0 for success else error fault code
 820  */
 821 int ish_hw_start(struct ishtp_device *dev)
 822 {
 823         ish_set_host_rdy(dev);
 824
 825         set_host_ready(dev);
 826
 827         /* After that we can enable ISH DMA operation and wakeup ISHFW */
 828         ish_wakeup(dev);
 829
 830         /* wait for FW-initiated reset flow */
 831         if (!dev->recvd_hw_ready)
 832                 wait_event_interruptible_timeout(dev->wait_hw_ready,
 833                                                  dev->recvd_hw_ready,
 834                                                  10 * HZ);
 835
 836         if (!dev->recvd_hw_ready) {
 837                 dev_err(dev->devc,
 838                         "[ishtp-ish]: Timed out waiting for FW-initiated reset\n");
 839                 return  -ENODEV;
 840         }
 841
 842         return 0;
 843 }
 844
 845 /**
 846  * ish_ipc_get_header() -Get doorbell value
 847  * @dev: ishtp device pointer
 848  * @length: length of message
 849  * @busy: busy status
 850  *
 851  * Get door bell value from message header
 852  *
 853  * Return: door bell value
 854  */
 855 static uint32_t ish_ipc_get_header(struct ishtp_device *dev, int length,
 856                                    int busy)
 857 {
 858         uint32_t drbl_val;
 859
 860         drbl_val = IPC_BUILD_HEADER(length, IPC_PROTOCOL_ISHTP, busy);
 861
 862         return drbl_val;
 863 }
 864
 865 static const struct ishtp_hw_ops ish_hw_ops = {
 866         .hw_reset = _ish_hw_reset,
 867         .ipc_reset = _ish_ipc_reset,
 868         .ipc_get_header = ish_ipc_get_header,
 869         .ishtp_read = _ishtp_read,
 870         .write = write_ipc_to_queue,
 871         .get_fw_status = _ish_read_fw_sts_reg,
 872         .sync_fw_clock = _ish_sync_fw_clock,
 873         .ishtp_read_hdr = _ishtp_read_hdr
 874 };
 875
 876 /**
 877  * ish_dev_init() -Initialize ISH devoce
 878  * @pdev: PCI device
 879  *
 880  * Allocate ISHTP device and initialize IPC processing
 881  *
 882  * Return: ISHTP device instance on success else NULL
 883  */
 884 struct ishtp_device *ish_dev_init(struct pci_dev *pdev)
 885 {
 886         struct ishtp_device *dev;
 887         int     i;
 888
 889         dev = devm_kzalloc(&pdev->dev,
 890                            sizeof(struct ishtp_device) + sizeof(struct ish_hw),
 891                            GFP_KERNEL);
 892         if (!dev)
 893                 return NULL;
 894
 895         ishtp_device_init(dev);
 896
 897         init_waitqueue_head(&dev->wait_hw_ready);
 898
 899         spin_lock_init(&dev->wr_processing_spinlock);
 900
 901         /* Init IPC processing and free lists */
 902         INIT_LIST_HEAD(&dev->wr_processing_list);
 903         INIT_LIST_HEAD(&dev->wr_free_list);
 904         for (i = 0; i < IPC_TX_FIFO_SIZE; i++) {
 905                 struct wr_msg_ctl_info  *tx_buf;
 906
 907                 tx_buf = devm_kzalloc(&pdev->dev,
 908                                       sizeof(struct wr_msg_ctl_info),
 909                                       GFP_KERNEL);
 910                 if (!tx_buf) {
 911                         /*
 912                          * IPC buffers may be limited or not available
 913                          * at all - although this shouldn't happen
 914                          */
 915                         dev_err(dev->devc,
 916                                 "[ishtp-ish]: failure in Tx FIFO allocations (%d)\n",
 917                                 i);
 918                         break;
 919                 }
 920                 list_add_tail(&tx_buf->link, &dev->wr_free_list);
 921         }
 922
 923         dev->ops = &ish_hw_ops;
 924         dev->devc = &pdev->dev;
 925         dev->mtu = IPC_PAYLOAD_SIZE - sizeof(struct ishtp_msg_hdr);
 926         return dev;
 927 }
 928
 929 /**
 930  * ish_device_disable() - Disable ISH device
 931  * @dev: ISHTP device pointer
 932  *
 933  * Disable ISH by clearing host ready to inform firmware.
 934  */
 935 void    ish_device_disable(struct ishtp_device *dev)
 936 {
 937         struct pci_dev *pdev = dev->pdev;
 938
 939         if (!pdev)
 940                 return;
 941
 942         /* Disable dma communication between FW and host */
 943         if (ish_disable_dma(dev)) {
 944                 dev_err(&pdev->dev,
 945                         "Can't reset - stuck with DMA in-progress\n");
 946                 return;
 947         }
 948
 949         /* Put ISH to D3hot state for power saving */
 950         pci_set_power_state(pdev, PCI_D3hot);
 951
 952         dev->dev_state = ISHTP_DEV_DISABLED;
 953         ish_clr_host_rdy(dev);
 954 }