drivers/gpu/drm/via/via_dmablit.c

   1 /* via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro
   2  *
   3  * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved.
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining a
   6  * copy of this software and associated documentation files (the "Software"),
   7  * to deal in the Software without restriction, including without limitation
   8  * the rights to use, copy, modify, merge, publish, distribute, sub license,
   9  * and/or sell copies of the Software, and to permit persons to whom the
  10  * Software is furnished to do so, subject to the following conditions:
  11  *
  12  * The above copyright notice and this permission notice (including the
  13  * next paragraph) shall be included in all copies or substantial portions
  14  * of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
  19  * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
  20  * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
  21  * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
  22  * USE OR OTHER DEALINGS IN THE SOFTWARE.
  23  *
  24  * Authors:
  25  *    Thomas Hellstrom.
  26  *    Partially based on code obtained from Digeo Inc.
  27  */
  28
  29
  30 /*
  31  * Unmaps the DMA mappings.
  32  * FIXME: Is this a NoOp on x86? Also
  33  * FIXME: What happens if this one is called and a pending blit has previously done
  34  * the same DMA mappings?
  35  */
  36
  37 #include <drm/drmP.h>
  38 #include <drm/via_drm.h>
  39 #include "via_drv.h"
  40 #include "via_dmablit.h"
  41
  42 #include <linux/pagemap.h>
  43 #include <linux/slab.h>
  44
  45 #define VIA_PGDN(x)          (((unsigned long)(x)) & PAGE_MASK)
  46 #define VIA_PGOFF(x)        (((unsigned long)(x)) & ~PAGE_MASK)
  47 #define VIA_PFN(x)            ((unsigned long)(x) >> PAGE_SHIFT)
  48
  49 typedef struct _drm_via_descriptor {
  50         uint32_t mem_addr;
  51         uint32_t dev_addr;
  52         uint32_t size;
  53         uint32_t next;
  54 } drm_via_descriptor_t;
  55
  56
  57 /*
  58  * Unmap a DMA mapping.
  59  */
  60
  61
  62
  63 static void
  64 via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
  65 {
  66         int num_desc = vsg->num_desc;
  67         unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page;
  68         unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page;
  69         drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] +
  70                 descriptor_this_page;
  71         dma_addr_t next = vsg->chain_start;
  72
  73         while (num_desc--) {
  74                 if (descriptor_this_page-- == 0) {
  75                         cur_descriptor_page--;
  76                         descriptor_this_page = vsg->descriptors_per_page - 1;
  77                         desc_ptr = vsg->desc_pages[cur_descriptor_page] +
  78                                 descriptor_this_page;
  79                 }
  80                 dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE);
  81                 dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction);
  82                 next = (dma_addr_t) desc_ptr->next;
  83                 desc_ptr--;
  84         }
  85 }
  86
  87 /*
  88  * If mode = 0, count how many descriptors are needed.
  89  * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors.
  90  * Descriptors are run in reverse order by the hardware because we are not allowed to update the
  91  * 'next' field without syncing calls when the descriptor is already mapped.
  92  */
  93
  94 static void
  95 via_map_blit_for_device(struct pci_dev *pdev,
  96                    const drm_via_dmablit_t *xfer,
  97                    drm_via_sg_info_t *vsg,
  98                    int mode)
  99 {
 100         unsigned cur_descriptor_page = 0;
 101         unsigned num_descriptors_this_page = 0;
 102         unsigned char *mem_addr = xfer->mem_addr;
 103         unsigned char *cur_mem;
 104         unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr);
 105         uint32_t fb_addr = xfer->fb_addr;
 106         uint32_t cur_fb;
 107         unsigned long line_len;
 108         unsigned remaining_len;
 109         int num_desc = 0;
 110         int cur_line;
 111         dma_addr_t next = 0 | VIA_DMA_DPR_EC;
 112         drm_via_descriptor_t *desc_ptr = NULL;
 113
 114         if (mode == 1)
 115                 desc_ptr = vsg->desc_pages[cur_descriptor_page];
 116
 117         for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) {
 118
 119                 line_len = xfer->line_length;
 120                 cur_fb = fb_addr;
 121                 cur_mem = mem_addr;
 122
 123                 while (line_len > 0) {
 124
 125                         remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len);
 126                         line_len -= remaining_len;
 127
 128                         if (mode == 1) {
 129                                 desc_ptr->mem_addr =
 130                                         dma_map_page(&pdev->dev,
 131                                                      vsg->pages[VIA_PFN(cur_mem) -
 132                                                                 VIA_PFN(first_addr)],
 133                                                      VIA_PGOFF(cur_mem), remaining_len,
 134                                                      vsg->direction);
 135                                 desc_ptr->dev_addr = cur_fb;
 136
 137                                 desc_ptr->size = remaining_len;
 138                                 desc_ptr->next = (uint32_t) next;
 139                                 next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr),
 140                                                       DMA_TO_DEVICE);
 141                                 desc_ptr++;
 142                                 if (++num_descriptors_this_page >= vsg->descriptors_per_page) {
 143                                         num_descriptors_this_page = 0;
 144                                         desc_ptr = vsg->desc_pages[++cur_descriptor_page];
 145                                 }
 146                         }
 147
 148                         num_desc++;
 149                         cur_mem += remaining_len;
 150                         cur_fb += remaining_len;
 151                 }
 152
 153                 mem_addr += xfer->mem_stride;
 154                 fb_addr += xfer->fb_stride;
 155         }
 156
 157         if (mode == 1) {
 158                 vsg->chain_start = next;
 159                 vsg->state = dr_via_device_mapped;
 160         }
 161         vsg->num_desc = num_desc;
 162 }
 163
 164 /*
 165  * Function that frees up all resources for a blit. It is usable even if the
 166  * blit info has only been partially built as long as the status enum is consistent
 167  * with the actual status of the used resources.
 168  */
 169
 170
 171 static void
 172 via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
 173 {
 174         struct page *page;
 175         int i;
 176
 177         switch (vsg->state) {
 178         case dr_via_device_mapped:
 179                 via_unmap_blit_from_device(pdev, vsg);
 180         case dr_via_desc_pages_alloc:
 181                 for (i = 0; i < vsg->num_desc_pages; ++i) {
 182                         if (vsg->desc_pages[i] != NULL)
 183                                 free_page((unsigned long)vsg->desc_pages[i]);
 184                 }
 185                 kfree(vsg->desc_pages);
 186         case dr_via_pages_locked:
 187                 for (i = 0; i < vsg->num_pages; ++i) {
 188                         if (NULL != (page = vsg->pages[i])) {
 189                                 if (!PageReserved(page) && (DMA_FROM_DEVICE == vsg->direction))
 190                                         SetPageDirty(page);
 191                                 put_page(page);
 192                         }
 193                 }
 194         case dr_via_pages_alloc:
 195                 vfree(vsg->pages);
 196         default:
 197                 vsg->state = dr_via_sg_init;
 198         }
 199         vfree(vsg->bounce_buffer);
 200         vsg->bounce_buffer = NULL;
 201         vsg->free_on_sequence = 0;
 202 }
 203
 204 /*
 205  * Fire a blit engine.
 206  */
 207
 208 static void
 209 via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine)
 210 {
 211         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 212
 213         VIA_WRITE(VIA_PCI_DMA_MAR0 + engine*0x10, 0);
 214         VIA_WRITE(VIA_PCI_DMA_DAR0 + engine*0x10, 0);
 215         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD |
 216                   VIA_DMA_CSR_DE);
 217         VIA_WRITE(VIA_PCI_DMA_MR0  + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE);
 218         VIA_WRITE(VIA_PCI_DMA_BCR0 + engine*0x10, 0);
 219         VIA_WRITE(VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start);
 220         wmb();
 221         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS);
 222         VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04);
 223 }
 224
 225 /*
 226  * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will
 227  * occur here if the calling user does not have access to the submitted address.
 228  */
 229
 230 static int
 231 via_lock_all_dma_pages(drm_via_sg_info_t *vsg,  drm_via_dmablit_t *xfer)
 232 {
 233         int ret;
 234         unsigned long first_pfn = VIA_PFN(xfer->mem_addr);
 235         vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) -
 236                 first_pfn + 1;
 237
 238         vsg->pages = vzalloc(array_size(sizeof(struct page *), vsg->num_pages));
 239         if (NULL == vsg->pages)
 240                 return -ENOMEM;
 241         ret = get_user_pages_fast((unsigned long)xfer->mem_addr,
 242                         vsg->num_pages, vsg->direction == DMA_FROM_DEVICE,
 243                         vsg->pages);
 244         if (ret != vsg->num_pages) {
 245                 if (ret < 0)
 246                         return ret;
 247                 vsg->state = dr_via_pages_locked;
 248                 return -EINVAL;
 249         }
 250         vsg->state = dr_via_pages_locked;
 251         DRM_DEBUG("DMA pages locked\n");
 252         return 0;
 253 }
 254
 255 /*
 256  * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the
 257  * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be
 258  * quite large for some blits, and pages don't need to be contiguous.
 259  */
 260
 261 static int
 262 via_alloc_desc_pages(drm_via_sg_info_t *vsg)
 263 {
 264         int i;
 265
 266         vsg->descriptors_per_page = PAGE_SIZE / sizeof(drm_via_descriptor_t);
 267         vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) /
 268                 vsg->descriptors_per_page;
 269
 270         if (NULL ==  (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL)))
 271                 return -ENOMEM;
 272
 273         vsg->state = dr_via_desc_pages_alloc;
 274         for (i = 0; i < vsg->num_desc_pages; ++i) {
 275                 if (NULL == (vsg->desc_pages[i] =
 276                              (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL)))
 277                         return -ENOMEM;
 278         }
 279         DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages,
 280                   vsg->num_desc);
 281         return 0;
 282 }
 283
 284 static void
 285 via_abort_dmablit(struct drm_device *dev, int engine)
 286 {
 287         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 288
 289         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA);
 290 }
 291
 292 static void
 293 via_dmablit_engine_off(struct drm_device *dev, int engine)
 294 {
 295         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 296
 297         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD);
 298 }
 299
 300
 301
 302 /*
 303  * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here.
 304  * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue
 305  * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while
 306  * the workqueue task takes care of processing associated with the old blit.
 307  */
 308
 309 void
 310 via_dmablit_handler(struct drm_device *dev, int engine, int from_irq)
 311 {
 312         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 313         drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
 314         int cur;
 315         int done_transfer;
 316         unsigned long irqsave = 0;
 317         uint32_t status = 0;
 318
 319         DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n",
 320                   engine, from_irq, (unsigned long) blitq);
 321
 322         if (from_irq)
 323                 spin_lock(&blitq->blit_lock);
 324         else
 325                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
 326
 327         done_transfer = blitq->is_active &&
 328           ((status = VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD);
 329         done_transfer = done_transfer || (blitq->aborting && !(status & VIA_DMA_CSR_DE));
 330
 331         cur = blitq->cur;
 332         if (done_transfer) {
 333
 334                 blitq->blits[cur]->aborted = blitq->aborting;
 335                 blitq->done_blit_handle++;
 336                 wake_up(blitq->blit_queue + cur);
 337
 338                 cur++;
 339                 if (cur >= VIA_NUM_BLIT_SLOTS)
 340                         cur = 0;
 341                 blitq->cur = cur;
 342
 343                 /*
 344                  * Clear transfer done flag.
 345                  */
 346
 347                 VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04,  VIA_DMA_CSR_TD);
 348
 349                 blitq->is_active = 0;
 350                 blitq->aborting = 0;
 351                 schedule_work(&blitq->wq);
 352
 353         } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) {
 354
 355                 /*
 356                  * Abort transfer after one second.
 357                  */
 358
 359                 via_abort_dmablit(dev, engine);
 360                 blitq->aborting = 1;
 361                 blitq->end = jiffies + HZ;
 362         }
 363
 364         if (!blitq->is_active) {
 365                 if (blitq->num_outstanding) {
 366                         via_fire_dmablit(dev, blitq->blits[cur], engine);
 367                         blitq->is_active = 1;
 368                         blitq->cur = cur;
 369                         blitq->num_outstanding--;
 370                         blitq->end = jiffies + HZ;
 371                         if (!timer_pending(&blitq->poll_timer))
 372                                 mod_timer(&blitq->poll_timer, jiffies + 1);
 373                 } else {
 374                         if (timer_pending(&blitq->poll_timer))
 375                                 del_timer(&blitq->poll_timer);
 376                         via_dmablit_engine_off(dev, engine);
 377                 }
 378         }
 379
 380         if (from_irq)
 381                 spin_unlock(&blitq->blit_lock);
 382         else
 383                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 384 }
 385
 386
 387
 388 /*
 389  * Check whether this blit is still active, performing necessary locking.
 390  */
 391
 392 static int
 393 via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue)
 394 {
 395         unsigned long irqsave;
 396         uint32_t slot;
 397         int active;
 398
 399         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 400
 401         /*
 402          * Allow for handle wraparounds.
 403          */
 404
 405         active = ((blitq->done_blit_handle - handle) > (1 << 23)) &&
 406                 ((blitq->cur_blit_handle - handle) <= (1 << 23));
 407
 408         if (queue && active) {
 409                 slot = handle - blitq->done_blit_handle + blitq->cur - 1;
 410                 if (slot >= VIA_NUM_BLIT_SLOTS)
 411                         slot -= VIA_NUM_BLIT_SLOTS;
 412                 *queue = blitq->blit_queue + slot;
 413         }
 414
 415         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 416
 417         return active;
 418 }
 419
 420 /*
 421  * Sync. Wait for at least three seconds for the blit to be performed.
 422  */
 423
 424 static int
 425 via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine)
 426 {
 427
 428         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 429         drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
 430         wait_queue_head_t *queue;
 431         int ret = 0;
 432
 433         if (via_dmablit_active(blitq, engine, handle, &queue)) {
 434                 DRM_WAIT_ON(ret, *queue, 3 * HZ,
 435                             !via_dmablit_active(blitq, engine, handle, NULL));
 436         }
 437         DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n",
 438                   handle, engine, ret);
 439
 440         return ret;
 441 }
 442
 443
 444 /*
 445  * A timer that regularly polls the blit engine in cases where we don't have interrupts:
 446  * a) Broken hardware (typically those that don't have any video capture facility).
 447  * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted.
 448  * The timer and hardware IRQ's can and do work in parallel. If the hardware has
 449  * irqs, it will shorten the latency somewhat.
 450  */
 451
 452
 453
 454 static void
 455 via_dmablit_timer(struct timer_list *t)
 456 {
 457         drm_via_blitq_t *blitq = from_timer(blitq, t, poll_timer);
 458         struct drm_device *dev = blitq->dev;
 459         int engine = (int)
 460                 (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues);
 461
 462         DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine,
 463                   (unsigned long) jiffies);
 464
 465         via_dmablit_handler(dev, engine, 0);
 466
 467         if (!timer_pending(&blitq->poll_timer)) {
 468                 mod_timer(&blitq->poll_timer, jiffies + 1);
 469
 470                /*
 471                 * Rerun handler to delete timer if engines are off, and
 472                 * to shorten abort latency. This is a little nasty.
 473                 */
 474
 475                via_dmablit_handler(dev, engine, 0);
 476
 477         }
 478 }
 479
 480
 481
 482
 483 /*
 484  * Workqueue task that frees data and mappings associated with a blit.
 485  * Also wakes up waiting processes. Each of these tasks handles one
 486  * blit engine only and may not be called on each interrupt.
 487  */
 488
 489
 490 static void
 491 via_dmablit_workqueue(struct work_struct *work)
 492 {
 493         drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq);
 494         struct drm_device *dev = blitq->dev;
 495         unsigned long irqsave;
 496         drm_via_sg_info_t *cur_sg;
 497         int cur_released;
 498
 499
 500         DRM_DEBUG("Workqueue task called for blit engine %ld\n", (unsigned long)
 501                   (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues));
 502
 503         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 504
 505         while (blitq->serviced != blitq->cur) {
 506
 507                 cur_released = blitq->serviced++;
 508
 509                 DRM_DEBUG("Releasing blit slot %d\n", cur_released);
 510
 511                 if (blitq->serviced >= VIA_NUM_BLIT_SLOTS)
 512                         blitq->serviced = 0;
 513
 514                 cur_sg = blitq->blits[cur_released];
 515                 blitq->num_free++;
 516
 517                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 518
 519                 wake_up(&blitq->busy_queue);
 520
 521                 via_free_sg_info(dev->pdev, cur_sg);
 522                 kfree(cur_sg);
 523
 524                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
 525         }
 526
 527         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 528 }
 529
 530
 531 /*
 532  * Init all blit engines. Currently we use two, but some hardware have 4.
 533  */
 534
 535
 536 void
 537 via_init_dmablit(struct drm_device *dev)
 538 {
 539         int i, j;
 540         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 541         drm_via_blitq_t *blitq;
 542
 543         pci_set_master(dev->pdev);
 544
 545         for (i = 0; i < VIA_NUM_BLIT_ENGINES; ++i) {
 546                 blitq = dev_priv->blit_queues + i;
 547                 blitq->dev = dev;
 548                 blitq->cur_blit_handle = 0;
 549                 blitq->done_blit_handle = 0;
 550                 blitq->head = 0;
 551                 blitq->cur = 0;
 552                 blitq->serviced = 0;
 553                 blitq->num_free = VIA_NUM_BLIT_SLOTS - 1;
 554                 blitq->num_outstanding = 0;
 555                 blitq->is_active = 0;
 556                 blitq->aborting = 0;
 557                 spin_lock_init(&blitq->blit_lock);
 558                 for (j = 0; j < VIA_NUM_BLIT_SLOTS; ++j)
 559                         init_waitqueue_head(blitq->blit_queue + j);
 560                 init_waitqueue_head(&blitq->busy_queue);
 561                 INIT_WORK(&blitq->wq, via_dmablit_workqueue);
 562                 timer_setup(&blitq->poll_timer, via_dmablit_timer, 0);
 563         }
 564 }
 565
 566 /*
 567  * Build all info and do all mappings required for a blit.
 568  */
 569
 570
 571 static int
 572 via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer)
 573 {
 574         int draw = xfer->to_fb;
 575         int ret = 0;
 576
 577         vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
 578         vsg->bounce_buffer = NULL;
 579
 580         vsg->state = dr_via_sg_init;
 581
 582         if (xfer->num_lines <= 0 || xfer->line_length <= 0) {
 583                 DRM_ERROR("Zero size bitblt.\n");
 584                 return -EINVAL;
 585         }
 586
 587         /*
 588          * Below check is a driver limitation, not a hardware one. We
 589          * don't want to lock unused pages, and don't want to incoporate the
 590          * extra logic of avoiding them. Make sure there are no.
 591          * (Not a big limitation anyway.)
 592          */
 593
 594         if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) {
 595                 DRM_ERROR("Too large system memory stride. Stride: %d, "
 596                           "Length: %d\n", xfer->mem_stride, xfer->line_length);
 597                 return -EINVAL;
 598         }
 599
 600         if ((xfer->mem_stride == xfer->line_length) &&
 601            (xfer->fb_stride == xfer->line_length)) {
 602                 xfer->mem_stride *= xfer->num_lines;
 603                 xfer->line_length = xfer->mem_stride;
 604                 xfer->fb_stride = xfer->mem_stride;
 605                 xfer->num_lines = 1;
 606         }
 607
 608         /*
 609          * Don't lock an arbitrary large number of pages, since that causes a
 610          * DOS security hole.
 611          */
 612
 613         if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) {
 614                 DRM_ERROR("Too large PCI DMA bitblt.\n");
 615                 return -EINVAL;
 616         }
 617
 618         /*
 619          * we allow a negative fb stride to allow flipping of images in
 620          * transfer.
 621          */
 622
 623         if (xfer->mem_stride < xfer->line_length ||
 624                 abs(xfer->fb_stride) < xfer->line_length) {
 625                 DRM_ERROR("Invalid frame-buffer / memory stride.\n");
 626                 return -EINVAL;
 627         }
 628
 629         /*
 630          * A hardware bug seems to be worked around if system memory addresses start on
 631          * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted
 632          * about this. Meanwhile, impose the following restrictions:
 633          */
 634
 635 #ifdef VIA_BUGFREE
 636         if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) ||
 637             ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) {
 638                 DRM_ERROR("Invalid DRM bitblt alignment.\n");
 639                 return -EINVAL;
 640         }
 641 #else
 642         if ((((unsigned long)xfer->mem_addr & 15) ||
 643               ((unsigned long)xfer->fb_addr & 3)) ||
 644            ((xfer->num_lines > 1) &&
 645            ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) {
 646                 DRM_ERROR("Invalid DRM bitblt alignment.\n");
 647                 return -EINVAL;
 648         }
 649 #endif
 650
 651         if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) {
 652                 DRM_ERROR("Could not lock DMA pages.\n");
 653                 via_free_sg_info(dev->pdev, vsg);
 654                 return ret;
 655         }
 656
 657         via_map_blit_for_device(dev->pdev, xfer, vsg, 0);
 658         if (0 != (ret = via_alloc_desc_pages(vsg))) {
 659                 DRM_ERROR("Could not allocate DMA descriptor pages.\n");
 660                 via_free_sg_info(dev->pdev, vsg);
 661                 return ret;
 662         }
 663         via_map_blit_for_device(dev->pdev, xfer, vsg, 1);
 664
 665         return 0;
 666 }
 667
 668
 669 /*
 670  * Reserve one free slot in the blit queue. Will wait for one second for one
 671  * to become available. Otherwise -EBUSY is returned.
 672  */
 673
 674 static int
 675 via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine)
 676 {
 677         int ret = 0;
 678         unsigned long irqsave;
 679
 680         DRM_DEBUG("Num free is %d\n", blitq->num_free);
 681         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 682         while (blitq->num_free == 0) {
 683                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 684
 685                 DRM_WAIT_ON(ret, blitq->busy_queue, HZ, blitq->num_free > 0);
 686                 if (ret)
 687                         return (-EINTR == ret) ? -EAGAIN : ret;
 688
 689                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
 690         }
 691
 692         blitq->num_free--;
 693         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 694
 695         return 0;
 696 }
 697
 698 /*
 699  * Hand back a free slot if we changed our mind.
 700  */
 701
 702 static void
 703 via_dmablit_release_slot(drm_via_blitq_t *blitq)
 704 {
 705         unsigned long irqsave;
 706
 707         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 708         blitq->num_free++;
 709         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 710         wake_up(&blitq->busy_queue);
 711 }
 712
 713 /*
 714  * Grab a free slot. Build blit info and queue a blit.
 715  */
 716
 717
 718 static int
 719 via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer)
 720 {
 721         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 722         drm_via_sg_info_t *vsg;
 723         drm_via_blitq_t *blitq;
 724         int ret;
 725         int engine;
 726         unsigned long irqsave;
 727
 728         if (dev_priv == NULL) {
 729                 DRM_ERROR("Called without initialization.\n");
 730                 return -EINVAL;
 731         }
 732
 733         engine = (xfer->to_fb) ? 0 : 1;
 734         blitq = dev_priv->blit_queues + engine;
 735         if (0 != (ret = via_dmablit_grab_slot(blitq, engine)))
 736                 return ret;
 737         if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) {
 738                 via_dmablit_release_slot(blitq);
 739                 return -ENOMEM;
 740         }
 741         if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) {
 742                 via_dmablit_release_slot(blitq);
 743                 kfree(vsg);
 744                 return ret;
 745         }
 746         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 747
 748         blitq->blits[blitq->head++] = vsg;
 749         if (blitq->head >= VIA_NUM_BLIT_SLOTS)
 750                 blitq->head = 0;
 751         blitq->num_outstanding++;
 752         xfer->sync.sync_handle = ++blitq->cur_blit_handle;
 753
 754         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 755         xfer->sync.engine = engine;
 756
 757         via_dmablit_handler(dev, engine, 0);
 758
 759         return 0;
 760 }
 761
 762 /*
 763  * Sync on a previously submitted blit. Note that the X server use signals extensively, and
 764  * that there is a very big probability that this IOCTL will be interrupted by a signal. In that
 765  * case it returns with -EAGAIN for the signal to be delivered.
 766  * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock().
 767  */
 768
 769 int
 770 via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv)
 771 {
 772         drm_via_blitsync_t *sync = data;
 773         int err;
 774
 775         if (sync->engine >= VIA_NUM_BLIT_ENGINES)
 776                 return -EINVAL;
 777
 778         err = via_dmablit_sync(dev, sync->sync_handle, sync->engine);
 779
 780         if (-EINTR == err)
 781                 err = -EAGAIN;
 782
 783         return err;
 784 }
 785
 786
 787 /*
 788  * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal
 789  * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should
 790  * be reissued. See the above IOCTL code.
 791  */
 792
 793 int
 794 via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv)
 795 {
 796         drm_via_dmablit_t *xfer = data;
 797         int err;
 798
 799         err = via_dmablit(dev, xfer);
 800
 801         return err;
 802 }