drivers/gpu/drm/rcar-du/rcar_lvds.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * rcar_lvds.c  --  R-Car LVDS Encoder
   4  *
   5  * Copyright (C) 2013-2018 Renesas Electronics Corporation
   6  *
   7  * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
   8  */
   9
  10 #include <linux/clk.h>
  11 #include <linux/delay.h>
  12 #include <linux/io.h>
  13 #include <linux/module.h>
  14 #include <linux/of.h>
  15 #include <linux/of_device.h>
  16 #include <linux/of_graph.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/slab.h>
  19 #include <linux/sys_soc.h>
  20
  21 #include <drm/drm_atomic.h>
  22 #include <drm/drm_atomic_helper.h>
  23 #include <drm/drm_bridge.h>
  24 #include <drm/drm_of.h>
  25 #include <drm/drm_panel.h>
  26 #include <drm/drm_print.h>
  27 #include <drm/drm_probe_helper.h>
  28
  29 #include "rcar_lvds.h"
  30 #include "rcar_lvds_regs.h"
  31
  32 struct rcar_lvds;
  33
  34 /* Keep in sync with the LVDCR0.LVMD hardware register values. */
  35 enum rcar_lvds_mode {
  36         RCAR_LVDS_MODE_JEIDA = 0,
  37         RCAR_LVDS_MODE_MIRROR = 1,
  38         RCAR_LVDS_MODE_VESA = 4,
  39 };
  40
  41 enum rcar_lvds_link_type {
  42         RCAR_LVDS_SINGLE_LINK = 0,
  43         RCAR_LVDS_DUAL_LINK_EVEN_ODD_PIXELS = 1,
  44         RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS = 2,
  45 };
  46
  47 #define RCAR_LVDS_QUIRK_LANES           BIT(0)  /* LVDS lanes 1 and 3 inverted */
  48 #define RCAR_LVDS_QUIRK_GEN3_LVEN       BIT(1)  /* LVEN bit needs to be set on R8A77970/R8A7799x */
  49 #define RCAR_LVDS_QUIRK_PWD             BIT(2)  /* PWD bit available (all of Gen3 but E3) */
  50 #define RCAR_LVDS_QUIRK_EXT_PLL         BIT(3)  /* Has extended PLL */
  51 #define RCAR_LVDS_QUIRK_DUAL_LINK       BIT(4)  /* Supports dual-link operation */
  52
  53 struct rcar_lvds_device_info {
  54         unsigned int gen;
  55         unsigned int quirks;
  56         void (*pll_setup)(struct rcar_lvds *lvds, unsigned int freq);
  57 };
  58
  59 struct rcar_lvds {
  60         struct device *dev;
  61         const struct rcar_lvds_device_info *info;
  62
  63         struct drm_bridge bridge;
  64
  65         struct drm_bridge *next_bridge;
  66         struct drm_connector connector;
  67         struct drm_panel *panel;
  68
  69         void __iomem *mmio;
  70         struct {
  71                 struct clk *mod;                /* CPG module clock */
  72                 struct clk *extal;              /* External clock */
  73                 struct clk *dotclkin[2];        /* External DU clocks */
  74         } clocks;
  75
  76         struct drm_bridge *companion;
  77         enum rcar_lvds_link_type link_type;
  78 };
  79
  80 #define bridge_to_rcar_lvds(b) \
  81         container_of(b, struct rcar_lvds, bridge)
  82
  83 #define connector_to_rcar_lvds(c) \
  84         container_of(c, struct rcar_lvds, connector)
  85
  86 static void rcar_lvds_write(struct rcar_lvds *lvds, u32 reg, u32 data)
  87 {
  88         iowrite32(data, lvds->mmio + reg);
  89 }
  90
  91 /* -----------------------------------------------------------------------------
  92  * Connector & Panel
  93  */
  94
  95 static int rcar_lvds_connector_get_modes(struct drm_connector *connector)
  96 {
  97         struct rcar_lvds *lvds = connector_to_rcar_lvds(connector);
  98
  99         return drm_panel_get_modes(lvds->panel, connector);
 100 }
 101
 102 static int rcar_lvds_connector_atomic_check(struct drm_connector *connector,
 103                                             struct drm_atomic_state *state)
 104 {
 105         struct rcar_lvds *lvds = connector_to_rcar_lvds(connector);
 106         const struct drm_display_mode *panel_mode;
 107         struct drm_connector_state *conn_state;
 108         struct drm_crtc_state *crtc_state;
 109
 110         conn_state = drm_atomic_get_new_connector_state(state, connector);
 111         if (!conn_state->crtc)
 112                 return 0;
 113
 114         if (list_empty(&connector->modes)) {
 115                 dev_dbg(lvds->dev, "connector: empty modes list\n");
 116                 return -EINVAL;
 117         }
 118
 119         panel_mode = list_first_entry(&connector->modes,
 120                                       struct drm_display_mode, head);
 121
 122         /* We're not allowed to modify the resolution. */
 123         crtc_state = drm_atomic_get_crtc_state(state, conn_state->crtc);
 124         if (IS_ERR(crtc_state))
 125                 return PTR_ERR(crtc_state);
 126
 127         if (crtc_state->mode.hdisplay != panel_mode->hdisplay ||
 128             crtc_state->mode.vdisplay != panel_mode->vdisplay)
 129                 return -EINVAL;
 130
 131         /* The flat panel mode is fixed, just copy it to the adjusted mode. */
 132         drm_mode_copy(&crtc_state->adjusted_mode, panel_mode);
 133
 134         return 0;
 135 }
 136
 137 static const struct drm_connector_helper_funcs rcar_lvds_conn_helper_funcs = {
 138         .get_modes = rcar_lvds_connector_get_modes,
 139         .atomic_check = rcar_lvds_connector_atomic_check,
 140 };
 141
 142 static const struct drm_connector_funcs rcar_lvds_conn_funcs = {
 143         .reset = drm_atomic_helper_connector_reset,
 144         .fill_modes = drm_helper_probe_single_connector_modes,
 145         .destroy = drm_connector_cleanup,
 146         .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 147         .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 148 };
 149
 150 /* -----------------------------------------------------------------------------
 151  * PLL Setup
 152  */
 153
 154 static void rcar_lvds_pll_setup_gen2(struct rcar_lvds *lvds, unsigned int freq)
 155 {
 156         u32 val;
 157
 158         if (freq < 39000000)
 159                 val = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
 160         else if (freq < 61000000)
 161                 val = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
 162         else if (freq < 121000000)
 163                 val = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
 164         else
 165                 val = LVDPLLCR_PLLDLYCNT_150M;
 166
 167         rcar_lvds_write(lvds, LVDPLLCR, val);
 168 }
 169
 170 static void rcar_lvds_pll_setup_gen3(struct rcar_lvds *lvds, unsigned int freq)
 171 {
 172         u32 val;
 173
 174         if (freq < 42000000)
 175                 val = LVDPLLCR_PLLDIVCNT_42M;
 176         else if (freq < 85000000)
 177                 val = LVDPLLCR_PLLDIVCNT_85M;
 178         else if (freq < 128000000)
 179                 val = LVDPLLCR_PLLDIVCNT_128M;
 180         else
 181                 val = LVDPLLCR_PLLDIVCNT_148M;
 182
 183         rcar_lvds_write(lvds, LVDPLLCR, val);
 184 }
 185
 186 struct pll_info {
 187         unsigned long diff;
 188         unsigned int pll_m;
 189         unsigned int pll_n;
 190         unsigned int pll_e;
 191         unsigned int div;
 192         u32 clksel;
 193 };
 194
 195 static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk,
 196                                      unsigned long target, struct pll_info *pll,
 197                                      u32 clksel, bool dot_clock_only)
 198 {
 199         unsigned int div7 = dot_clock_only ? 1 : 7;
 200         unsigned long output;
 201         unsigned long fin;
 202         unsigned int m_min;
 203         unsigned int m_max;
 204         unsigned int m;
 205         int error;
 206
 207         if (!clk)
 208                 return;
 209
 210         /*
 211          * The LVDS PLL is made of a pre-divider and a multiplier (strangely
 212          * enough called M and N respectively), followed by a post-divider E.
 213          *
 214          *         ,-----.         ,-----.     ,-----.         ,-----.
 215          * Fin --> | 1/M | -Fpdf-> | PFD | --> | VCO | -Fvco-> | 1/E | --> Fout
 216          *         `-----'     ,-> |     |     `-----'   |     `-----'
 217          *                     |   `-----'               |
 218          *                     |         ,-----.         |
 219          *                     `-------- | 1/N | <-------'
 220          *                               `-----'
 221          *
 222          * The clock output by the PLL is then further divided by a programmable
 223          * divider DIV to achieve the desired target frequency. Finally, an
 224          * optional fixed /7 divider is used to convert the bit clock to a pixel
 225          * clock (as LVDS transmits 7 bits per lane per clock sample).
 226          *
 227          *          ,-------.     ,-----.     |\
 228          * Fout --> | 1/DIV | --> | 1/7 | --> | |
 229          *          `-------'  |  `-----'     | | --> dot clock
 230          *                     `------------> | |
 231          *                                    |/
 232          *
 233          * The /7 divider is optional, it is enabled when the LVDS PLL is used
 234          * to drive the LVDS encoder, and disabled when  used to generate a dot
 235          * clock for the DU RGB output, without using the LVDS encoder.
 236          *
 237          * The PLL allowed input frequency range is 12 MHz to 192 MHz.
 238          */
 239
 240         fin = clk_get_rate(clk);
 241         if (fin < 12000000 || fin > 192000000)
 242                 return;
 243
 244         /*
 245          * The comparison frequency range is 12 MHz to 24 MHz, which limits the
 246          * allowed values for the pre-divider M (normal range 1-8).
 247          *
 248          * Fpfd = Fin / M
 249          */
 250         m_min = max_t(unsigned int, 1, DIV_ROUND_UP(fin, 24000000));
 251         m_max = min_t(unsigned int, 8, fin / 12000000);
 252
 253         for (m = m_min; m <= m_max; ++m) {
 254                 unsigned long fpfd;
 255                 unsigned int n_min;
 256                 unsigned int n_max;
 257                 unsigned int n;
 258
 259                 /*
 260                  * The VCO operating range is 900 Mhz to 1800 MHz, which limits
 261                  * the allowed values for the multiplier N (normal range
 262                  * 60-120).
 263                  *
 264                  * Fvco = Fin * N / M
 265                  */
 266                 fpfd = fin / m;
 267                 n_min = max_t(unsigned int, 60, DIV_ROUND_UP(900000000, fpfd));
 268                 n_max = min_t(unsigned int, 120, 1800000000 / fpfd);
 269
 270                 for (n = n_min; n < n_max; ++n) {
 271                         unsigned long fvco;
 272                         unsigned int e_min;
 273                         unsigned int e;
 274
 275                         /*
 276                          * The output frequency is limited to 1039.5 MHz,
 277                          * limiting again the allowed values for the
 278                          * post-divider E (normal value 1, 2 or 4).
 279                          *
 280                          * Fout = Fvco / E
 281                          */
 282                         fvco = fpfd * n;
 283                         e_min = fvco > 1039500000 ? 1 : 0;
 284
 285                         for (e = e_min; e < 3; ++e) {
 286                                 unsigned long fout;
 287                                 unsigned long diff;
 288                                 unsigned int div;
 289
 290                                 /*
 291                                  * Finally we have a programable divider after
 292                                  * the PLL, followed by a an optional fixed /7
 293                                  * divider.
 294                                  */
 295                                 fout = fvco / (1 << e) / div7;
 296                                 div = max(1UL, DIV_ROUND_CLOSEST(fout, target));
 297                                 diff = abs(fout / div - target);
 298
 299                                 if (diff < pll->diff) {
 300                                         pll->diff = diff;
 301                                         pll->pll_m = m;
 302                                         pll->pll_n = n;
 303                                         pll->pll_e = e;
 304                                         pll->div = div;
 305                                         pll->clksel = clksel;
 306
 307                                         if (diff == 0)
 308                                                 goto done;
 309                                 }
 310                         }
 311                 }
 312         }
 313
 314 done:
 315         output = fin * pll->pll_n / pll->pll_m / (1 << pll->pll_e)
 316                / div7 / pll->div;
 317         error = (long)(output - target) * 10000 / (long)target;
 318
 319         dev_dbg(lvds->dev,
 320                 "%pC %lu Hz -> Fout %lu Hz (target %lu Hz, error %d.%02u%%), PLL M/N/E/DIV %u/%u/%u/%u\n",
 321                 clk, fin, output, target, error / 100,
 322                 error < 0 ? -error % 100 : error % 100,
 323                 pll->pll_m, pll->pll_n, pll->pll_e, pll->div);
 324 }
 325
 326 static void __rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds,
 327                                         unsigned int freq, bool dot_clock_only)
 328 {
 329         struct pll_info pll = { .diff = (unsigned long)-1 };
 330         u32 lvdpllcr;
 331
 332         rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.dotclkin[0], freq, &pll,
 333                                  LVDPLLCR_CKSEL_DU_DOTCLKIN(0), dot_clock_only);
 334         rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.dotclkin[1], freq, &pll,
 335                                  LVDPLLCR_CKSEL_DU_DOTCLKIN(1), dot_clock_only);
 336         rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.extal, freq, &pll,
 337                                  LVDPLLCR_CKSEL_EXTAL, dot_clock_only);
 338
 339         lvdpllcr = LVDPLLCR_PLLON | pll.clksel | LVDPLLCR_CLKOUT
 340                  | LVDPLLCR_PLLN(pll.pll_n - 1) | LVDPLLCR_PLLM(pll.pll_m - 1);
 341
 342         if (pll.pll_e > 0)
 343                 lvdpllcr |= LVDPLLCR_STP_CLKOUTE | LVDPLLCR_OUTCLKSEL
 344                          |  LVDPLLCR_PLLE(pll.pll_e - 1);
 345
 346         if (dot_clock_only)
 347                 lvdpllcr |= LVDPLLCR_OCKSEL;
 348
 349         rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr);
 350
 351         if (pll.div > 1)
 352                 /*
 353                  * The DIVRESET bit is a misnomer, setting it to 1 deasserts the
 354                  * divisor reset.
 355                  */
 356                 rcar_lvds_write(lvds, LVDDIV, LVDDIV_DIVSEL |
 357                                 LVDDIV_DIVRESET | LVDDIV_DIV(pll.div - 1));
 358         else
 359                 rcar_lvds_write(lvds, LVDDIV, 0);
 360 }
 361
 362 static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, unsigned int freq)
 363 {
 364         __rcar_lvds_pll_setup_d3_e3(lvds, freq, false);
 365 }
 366
 367 /* -----------------------------------------------------------------------------
 368  * Clock - D3/E3 only
 369  */
 370
 371 int rcar_lvds_clk_enable(struct drm_bridge *bridge, unsigned long freq)
 372 {
 373         struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
 374         int ret;
 375
 376         if (WARN_ON(!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)))
 377                 return -ENODEV;
 378
 379         dev_dbg(lvds->dev, "enabling LVDS PLL, freq=%luHz\n", freq);
 380
 381         ret = clk_prepare_enable(lvds->clocks.mod);
 382         if (ret < 0)
 383                 return ret;
 384
 385         __rcar_lvds_pll_setup_d3_e3(lvds, freq, true);
 386
 387         return 0;
 388 }
 389 EXPORT_SYMBOL_GPL(rcar_lvds_clk_enable);
 390
 391 void rcar_lvds_clk_disable(struct drm_bridge *bridge)
 392 {
 393         struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
 394
 395         if (WARN_ON(!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)))
 396                 return;
 397
 398         dev_dbg(lvds->dev, "disabling LVDS PLL\n");
 399
 400         rcar_lvds_write(lvds, LVDPLLCR, 0);
 401
 402         clk_disable_unprepare(lvds->clocks.mod);
 403 }
 404 EXPORT_SYMBOL_GPL(rcar_lvds_clk_disable);
 405
 406 /* -----------------------------------------------------------------------------
 407  * Bridge
 408  */
 409
 410 static enum rcar_lvds_mode rcar_lvds_get_lvds_mode(struct rcar_lvds *lvds,
 411                                         const struct drm_connector *connector)
 412 {
 413         const struct drm_display_info *info;
 414         enum rcar_lvds_mode mode;
 415
 416         /*
 417          * There is no API yet to retrieve LVDS mode from a bridge, only panels
 418          * are supported.
 419          */
 420         if (!lvds->panel)
 421                 return RCAR_LVDS_MODE_JEIDA;
 422
 423         info = &connector->display_info;
 424         if (!info->num_bus_formats || !info->bus_formats) {
 425                 dev_warn(lvds->dev,
 426                          "no LVDS bus format reported, using JEIDA\n");
 427                 return RCAR_LVDS_MODE_JEIDA;
 428         }
 429
 430         switch (info->bus_formats[0]) {
 431         case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
 432         case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
 433                 mode = RCAR_LVDS_MODE_JEIDA;
 434                 break;
 435         case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
 436                 mode = RCAR_LVDS_MODE_VESA;
 437                 break;
 438         default:
 439                 dev_warn(lvds->dev,
 440                          "unsupported LVDS bus format 0x%04x, using JEIDA\n",
 441                          info->bus_formats[0]);
 442                 return RCAR_LVDS_MODE_JEIDA;
 443         }
 444
 445         if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB)
 446                 mode |= RCAR_LVDS_MODE_MIRROR;
 447
 448         return mode;
 449 }
 450
 451 static void __rcar_lvds_atomic_enable(struct drm_bridge *bridge,
 452                                       struct drm_atomic_state *state,
 453                                       struct drm_crtc *crtc,
 454                                       struct drm_connector *connector)
 455 {
 456         struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
 457         u32 lvdhcr;
 458         u32 lvdcr0;
 459         int ret;
 460
 461         ret = clk_prepare_enable(lvds->clocks.mod);
 462         if (ret < 0)
 463                 return;
 464
 465         /* Enable the companion LVDS encoder in dual-link mode. */
 466         if (lvds->link_type != RCAR_LVDS_SINGLE_LINK && lvds->companion)
 467                 __rcar_lvds_atomic_enable(lvds->companion, state, crtc,
 468                                           connector);
 469
 470         /*
 471          * Hardcode the channels and control signals routing for now.
 472          *
 473          * HSYNC -> CTRL0
 474          * VSYNC -> CTRL1
 475          * DISP  -> CTRL2
 476          * 0     -> CTRL3
 477          */
 478         rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO |
 479                         LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC |
 480                         LVDCTRCR_CTR0SEL_HSYNC);
 481
 482         if (lvds->info->quirks & RCAR_LVDS_QUIRK_LANES)
 483                 lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3)
 484                        | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1);
 485         else
 486                 lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1)
 487                        | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3);
 488
 489         rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
 490
 491         if (lvds->info->quirks & RCAR_LVDS_QUIRK_DUAL_LINK) {
 492                 u32 lvdstripe = 0;
 493
 494                 if (lvds->link_type != RCAR_LVDS_SINGLE_LINK) {
 495                         /*
 496                          * By default we generate even pixels from the primary
 497                          * encoder and odd pixels from the companion encoder.
 498                          * Swap pixels around if the sink requires odd pixels
 499                          * from the primary encoder and even pixels from the
 500                          * companion encoder.
 501                          */
 502                         bool swap_pixels = lvds->link_type ==
 503                                 RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS;
 504
 505                         /*
 506                          * Configure vertical stripe since we are dealing with
 507                          * an LVDS dual-link connection.
 508                          *
 509                          * ST_SWAP is reserved for the companion encoder, only
 510                          * set it in the primary encoder.
 511                          */
 512                         lvdstripe = LVDSTRIPE_ST_ON
 513                                   | (lvds->companion && swap_pixels ?
 514                                      LVDSTRIPE_ST_SWAP : 0);
 515                 }
 516                 rcar_lvds_write(lvds, LVDSTRIPE, lvdstripe);
 517         }
 518
 519         /*
 520          * PLL clock configuration on all instances but the companion in
 521          * dual-link mode.
 522          */
 523         if (lvds->link_type == RCAR_LVDS_SINGLE_LINK || lvds->companion) {
 524                 const struct drm_crtc_state *crtc_state =
 525                         drm_atomic_get_new_crtc_state(state, crtc);
 526                 const struct drm_display_mode *mode =
 527                         &crtc_state->adjusted_mode;
 528
 529                 lvds->info->pll_setup(lvds, mode->clock * 1000);
 530         }
 531
 532         /* Set the LVDS mode and select the input. */
 533         lvdcr0 = rcar_lvds_get_lvds_mode(lvds, connector) << LVDCR0_LVMD_SHIFT;
 534
 535         if (lvds->bridge.encoder) {
 536                 if (drm_crtc_index(crtc) == 2)
 537                         lvdcr0 |= LVDCR0_DUSEL;
 538         }
 539
 540         rcar_lvds_write(lvds, LVDCR0, lvdcr0);
 541
 542         /* Turn all the channels on. */
 543         rcar_lvds_write(lvds, LVDCR1,
 544                         LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
 545                         LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
 546
 547         if (lvds->info->gen < 3) {
 548                 /* Enable LVDS operation and turn the bias circuitry on. */
 549                 lvdcr0 |= LVDCR0_BEN | LVDCR0_LVEN;
 550                 rcar_lvds_write(lvds, LVDCR0, lvdcr0);
 551         }
 552
 553         if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)) {
 554                 /*
 555                  * Turn the PLL on (simple PLL only, extended PLL is fully
 556                  * controlled through LVDPLLCR).
 557                  */
 558                 lvdcr0 |= LVDCR0_PLLON;
 559                 rcar_lvds_write(lvds, LVDCR0, lvdcr0);
 560         }
 561
 562         if (lvds->info->quirks & RCAR_LVDS_QUIRK_PWD) {
 563                 /* Set LVDS normal mode. */
 564                 lvdcr0 |= LVDCR0_PWD;
 565                 rcar_lvds_write(lvds, LVDCR0, lvdcr0);
 566         }
 567
 568         if (lvds->info->quirks & RCAR_LVDS_QUIRK_GEN3_LVEN) {
 569                 /*
 570                  * Turn on the LVDS PHY. On D3, the LVEN and LVRES bit must be
 571                  * set at the same time, so don't write the register yet.
 572                  */
 573                 lvdcr0 |= LVDCR0_LVEN;
 574                 if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_PWD))
 575                         rcar_lvds_write(lvds, LVDCR0, lvdcr0);
 576         }
 577
 578         if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)) {
 579                 /* Wait for the PLL startup delay (simple PLL only). */
 580                 usleep_range(100, 150);
 581         }
 582
 583         /* Turn the output on. */
 584         lvdcr0 |= LVDCR0_LVRES;
 585         rcar_lvds_write(lvds, LVDCR0, lvdcr0);
 586
 587         if (lvds->panel) {
 588                 drm_panel_prepare(lvds->panel);
 589                 drm_panel_enable(lvds->panel);
 590         }
 591 }
 592
 593 static void rcar_lvds_atomic_enable(struct drm_bridge *bridge,
 594                                     struct drm_bridge_state *old_bridge_state)
 595 {
 596         struct drm_atomic_state *state = old_bridge_state->base.state;
 597         struct drm_connector *connector;
 598         struct drm_crtc *crtc;
 599
 600         connector = drm_atomic_get_new_connector_for_encoder(state,
 601                                                              bridge->encoder);
 602         crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
 603
 604         __rcar_lvds_atomic_enable(bridge, state, crtc, connector);
 605 }
 606
 607 static void rcar_lvds_atomic_disable(struct drm_bridge *bridge,
 608                                      struct drm_bridge_state *old_bridge_state)
 609 {
 610         struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
 611
 612         if (lvds->panel) {
 613                 drm_panel_disable(lvds->panel);
 614                 drm_panel_unprepare(lvds->panel);
 615         }
 616
 617         rcar_lvds_write(lvds, LVDCR0, 0);
 618         rcar_lvds_write(lvds, LVDCR1, 0);
 619         rcar_lvds_write(lvds, LVDPLLCR, 0);
 620
 621         /* Disable the companion LVDS encoder in dual-link mode. */
 622         if (lvds->link_type != RCAR_LVDS_SINGLE_LINK && lvds->companion)
 623                 lvds->companion->funcs->atomic_disable(lvds->companion,
 624                                                        old_bridge_state);
 625
 626         clk_disable_unprepare(lvds->clocks.mod);
 627 }
 628
 629 static bool rcar_lvds_mode_fixup(struct drm_bridge *bridge,
 630                                  const struct drm_display_mode *mode,
 631                                  struct drm_display_mode *adjusted_mode)
 632 {
 633         struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
 634         int min_freq;
 635
 636         /*
 637          * The internal LVDS encoder has a restricted clock frequency operating
 638          * range, from 5MHz to 148.5MHz on D3 and E3, and from 31MHz to
 639          * 148.5MHz on all other platforms. Clamp the clock accordingly.
 640          */
 641         min_freq = lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL ? 5000 : 31000;
 642         adjusted_mode->clock = clamp(adjusted_mode->clock, min_freq, 148500);
 643
 644         return true;
 645 }
 646
 647 static int rcar_lvds_attach(struct drm_bridge *bridge,
 648                             enum drm_bridge_attach_flags flags)
 649 {
 650         struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
 651         struct drm_connector *connector = &lvds->connector;
 652         struct drm_encoder *encoder = bridge->encoder;
 653         int ret;
 654
 655         /* If we have a next bridge just attach it. */
 656         if (lvds->next_bridge)
 657                 return drm_bridge_attach(bridge->encoder, lvds->next_bridge,
 658                                          bridge, flags);
 659
 660         if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
 661                 DRM_ERROR("Fix bridge driver to make connector optional!");
 662                 return -EINVAL;
 663         }
 664
 665         /* Otherwise if we have a panel, create a connector. */
 666         if (!lvds->panel)
 667                 return 0;
 668
 669         ret = drm_connector_init(bridge->dev, connector, &rcar_lvds_conn_funcs,
 670                                  DRM_MODE_CONNECTOR_LVDS);
 671         if (ret < 0)
 672                 return ret;
 673
 674         drm_connector_helper_add(connector, &rcar_lvds_conn_helper_funcs);
 675
 676         ret = drm_connector_attach_encoder(connector, encoder);
 677         if (ret < 0)
 678                 return ret;
 679
 680         return 0;
 681 }
 682
 683 static void rcar_lvds_detach(struct drm_bridge *bridge)
 684 {
 685 }
 686
 687 static const struct drm_bridge_funcs rcar_lvds_bridge_ops = {
 688         .attach = rcar_lvds_attach,
 689         .detach = rcar_lvds_detach,
 690         .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
 691         .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
 692         .atomic_reset = drm_atomic_helper_bridge_reset,
 693         .atomic_enable = rcar_lvds_atomic_enable,
 694         .atomic_disable = rcar_lvds_atomic_disable,
 695         .mode_fixup = rcar_lvds_mode_fixup,
 696 };
 697
 698 bool rcar_lvds_dual_link(struct drm_bridge *bridge)
 699 {
 700         struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
 701
 702         return lvds->link_type != RCAR_LVDS_SINGLE_LINK;
 703 }
 704 EXPORT_SYMBOL_GPL(rcar_lvds_dual_link);
 705
 706 /* -----------------------------------------------------------------------------
 707  * Probe & Remove
 708  */
 709
 710 static int rcar_lvds_parse_dt_companion(struct rcar_lvds *lvds)
 711 {
 712         const struct of_device_id *match;
 713         struct device_node *companion;
 714         struct device_node *port0, *port1;
 715         struct rcar_lvds *companion_lvds;
 716         struct device *dev = lvds->dev;
 717         int dual_link;
 718         int ret = 0;
 719
 720         /* Locate the companion LVDS encoder for dual-link operation, if any. */
 721         companion = of_parse_phandle(dev->of_node, "renesas,companion", 0);
 722         if (!companion)
 723                 return 0;
 724
 725         /*
 726          * Sanity check: the companion encoder must have the same compatible
 727          * string.
 728          */
 729         match = of_match_device(dev->driver->of_match_table, dev);
 730         if (!of_device_is_compatible(companion, match->compatible)) {
 731                 dev_err(dev, "Companion LVDS encoder is invalid\n");
 732                 ret = -ENXIO;
 733                 goto done;
 734         }
 735
 736         /*
 737          * We need to work out if the sink is expecting us to function in
 738          * dual-link mode. We do this by looking at the DT port nodes we are
 739          * connected to, if they are marked as expecting even pixels and
 740          * odd pixels than we need to enable vertical stripe output.
 741          */
 742         port0 = of_graph_get_port_by_id(dev->of_node, 1);
 743         port1 = of_graph_get_port_by_id(companion, 1);
 744         dual_link = drm_of_lvds_get_dual_link_pixel_order(port0, port1);
 745         of_node_put(port0);
 746         of_node_put(port1);
 747
 748         switch (dual_link) {
 749         case DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS:
 750                 lvds->link_type = RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS;
 751                 break;
 752         case DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS:
 753                 lvds->link_type = RCAR_LVDS_DUAL_LINK_EVEN_ODD_PIXELS;
 754                 break;
 755         default:
 756                 /*
 757                  * Early dual-link bridge specific implementations populate the
 758                  * timings field of drm_bridge. If the flag is set, we assume
 759                  * that we are expected to generate even pixels from the primary
 760                  * encoder, and odd pixels from the companion encoder.
 761                  */
 762                 if (lvds->next_bridge && lvds->next_bridge->timings &&
 763                     lvds->next_bridge->timings->dual_link)
 764                         lvds->link_type = RCAR_LVDS_DUAL_LINK_EVEN_ODD_PIXELS;
 765                 else
 766                         lvds->link_type = RCAR_LVDS_SINGLE_LINK;
 767         }
 768
 769         if (lvds->link_type == RCAR_LVDS_SINGLE_LINK) {
 770                 dev_dbg(dev, "Single-link configuration detected\n");
 771                 goto done;
 772         }
 773
 774         lvds->companion = of_drm_find_bridge(companion);
 775         if (!lvds->companion) {
 776                 ret = -EPROBE_DEFER;
 777                 goto done;
 778         }
 779
 780         dev_dbg(dev,
 781                 "Dual-link configuration detected (companion encoder %pOF)\n",
 782                 companion);
 783
 784         if (lvds->link_type == RCAR_LVDS_DUAL_LINK_ODD_EVEN_PIXELS)
 785                 dev_dbg(dev, "Data swapping required\n");
 786
 787         /*
 788          * FIXME: We should not be messing with the companion encoder private
 789          * data from the primary encoder, we should rather let the companion
 790          * encoder work things out on its own. However, the companion encoder
 791          * doesn't hold a reference to the primary encoder, and
 792          * drm_of_lvds_get_dual_link_pixel_order needs to be given references
 793          * to the output ports of both encoders, therefore leave it like this
 794          * for the time being.
 795          */
 796         companion_lvds = bridge_to_rcar_lvds(lvds->companion);
 797         companion_lvds->link_type = lvds->link_type;
 798
 799 done:
 800         of_node_put(companion);
 801
 802         return ret;
 803 }
 804
 805 static int rcar_lvds_parse_dt(struct rcar_lvds *lvds)
 806 {
 807         int ret;
 808
 809         ret = drm_of_find_panel_or_bridge(lvds->dev->of_node, 1, 0,
 810                                           &lvds->panel, &lvds->next_bridge);
 811         if (ret)
 812                 goto done;
 813
 814         if (lvds->info->quirks & RCAR_LVDS_QUIRK_DUAL_LINK)
 815                 ret = rcar_lvds_parse_dt_companion(lvds);
 816
 817 done:
 818         /*
 819          * On D3/E3 the LVDS encoder provides a clock to the DU, which can be
 820          * used for the DPAD output even when the LVDS output is not connected.
 821          * Don't fail probe in that case as the DU will need the bridge to
 822          * control the clock.
 823          */
 824         if (lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)
 825                 return ret == -ENODEV ? 0 : ret;
 826
 827         return ret;
 828 }
 829
 830 static struct clk *rcar_lvds_get_clock(struct rcar_lvds *lvds, const char *name,
 831                                        bool optional)
 832 {
 833         struct clk *clk;
 834
 835         clk = devm_clk_get(lvds->dev, name);
 836         if (!IS_ERR(clk))
 837                 return clk;
 838
 839         if (PTR_ERR(clk) == -ENOENT && optional)
 840                 return NULL;
 841
 842         if (PTR_ERR(clk) != -EPROBE_DEFER)
 843                 dev_err(lvds->dev, "failed to get %s clock\n",
 844                         name ? name : "module");
 845
 846         return clk;
 847 }
 848
 849 static int rcar_lvds_get_clocks(struct rcar_lvds *lvds)
 850 {
 851         lvds->clocks.mod = rcar_lvds_get_clock(lvds, NULL, false);
 852         if (IS_ERR(lvds->clocks.mod))
 853                 return PTR_ERR(lvds->clocks.mod);
 854
 855         /*
 856          * LVDS encoders without an extended PLL have no external clock inputs.
 857          */
 858         if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL))
 859                 return 0;
 860
 861         lvds->clocks.extal = rcar_lvds_get_clock(lvds, "extal", true);
 862         if (IS_ERR(lvds->clocks.extal))
 863                 return PTR_ERR(lvds->clocks.extal);
 864
 865         lvds->clocks.dotclkin[0] = rcar_lvds_get_clock(lvds, "dclkin.0", true);
 866         if (IS_ERR(lvds->clocks.dotclkin[0]))
 867                 return PTR_ERR(lvds->clocks.dotclkin[0]);
 868
 869         lvds->clocks.dotclkin[1] = rcar_lvds_get_clock(lvds, "dclkin.1", true);
 870         if (IS_ERR(lvds->clocks.dotclkin[1]))
 871                 return PTR_ERR(lvds->clocks.dotclkin[1]);
 872
 873         /* At least one input to the PLL must be available. */
 874         if (!lvds->clocks.extal && !lvds->clocks.dotclkin[0] &&
 875             !lvds->clocks.dotclkin[1]) {
 876                 dev_err(lvds->dev,
 877                         "no input clock (extal, dclkin.0 or dclkin.1)\n");
 878                 return -EINVAL;
 879         }
 880
 881         return 0;
 882 }
 883
 884 static const struct rcar_lvds_device_info rcar_lvds_r8a7790es1_info = {
 885         .gen = 2,
 886         .quirks = RCAR_LVDS_QUIRK_LANES,
 887         .pll_setup = rcar_lvds_pll_setup_gen2,
 888 };
 889
 890 static const struct soc_device_attribute lvds_quirk_matches[] = {
 891         {
 892                 .soc_id = "r8a7790", .revision = "ES1.*",
 893                 .data = &rcar_lvds_r8a7790es1_info,
 894         },
 895         { /* sentinel */ }
 896 };
 897
 898 static int rcar_lvds_probe(struct platform_device *pdev)
 899 {
 900         const struct soc_device_attribute *attr;
 901         struct rcar_lvds *lvds;
 902         struct resource *mem;
 903         int ret;
 904
 905         lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
 906         if (lvds == NULL)
 907                 return -ENOMEM;
 908
 909         platform_set_drvdata(pdev, lvds);
 910
 911         lvds->dev = &pdev->dev;
 912         lvds->info = of_device_get_match_data(&pdev->dev);
 913
 914         attr = soc_device_match(lvds_quirk_matches);
 915         if (attr)
 916                 lvds->info = attr->data;
 917
 918         ret = rcar_lvds_parse_dt(lvds);
 919         if (ret < 0)
 920                 return ret;
 921
 922         lvds->bridge.driver_private = lvds;
 923         lvds->bridge.funcs = &rcar_lvds_bridge_ops;
 924         lvds->bridge.of_node = pdev->dev.of_node;
 925
 926         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 927         lvds->mmio = devm_ioremap_resource(&pdev->dev, mem);
 928         if (IS_ERR(lvds->mmio))
 929                 return PTR_ERR(lvds->mmio);
 930
 931         ret = rcar_lvds_get_clocks(lvds);
 932         if (ret < 0)
 933                 return ret;
 934
 935         drm_bridge_add(&lvds->bridge);
 936
 937         return 0;
 938 }
 939
 940 static int rcar_lvds_remove(struct platform_device *pdev)
 941 {
 942         struct rcar_lvds *lvds = platform_get_drvdata(pdev);
 943
 944         drm_bridge_remove(&lvds->bridge);
 945
 946         return 0;
 947 }
 948
 949 static const struct rcar_lvds_device_info rcar_lvds_gen2_info = {
 950         .gen = 2,
 951         .pll_setup = rcar_lvds_pll_setup_gen2,
 952 };
 953
 954 static const struct rcar_lvds_device_info rcar_lvds_gen3_info = {
 955         .gen = 3,
 956         .quirks = RCAR_LVDS_QUIRK_PWD,
 957         .pll_setup = rcar_lvds_pll_setup_gen3,
 958 };
 959
 960 static const struct rcar_lvds_device_info rcar_lvds_r8a77970_info = {
 961         .gen = 3,
 962         .quirks = RCAR_LVDS_QUIRK_PWD | RCAR_LVDS_QUIRK_GEN3_LVEN,
 963         .pll_setup = rcar_lvds_pll_setup_gen2,
 964 };
 965
 966 static const struct rcar_lvds_device_info rcar_lvds_r8a77990_info = {
 967         .gen = 3,
 968         .quirks = RCAR_LVDS_QUIRK_GEN3_LVEN | RCAR_LVDS_QUIRK_EXT_PLL
 969                 | RCAR_LVDS_QUIRK_DUAL_LINK,
 970         .pll_setup = rcar_lvds_pll_setup_d3_e3,
 971 };
 972
 973 static const struct rcar_lvds_device_info rcar_lvds_r8a77995_info = {
 974         .gen = 3,
 975         .quirks = RCAR_LVDS_QUIRK_GEN3_LVEN | RCAR_LVDS_QUIRK_PWD
 976                 | RCAR_LVDS_QUIRK_EXT_PLL | RCAR_LVDS_QUIRK_DUAL_LINK,
 977         .pll_setup = rcar_lvds_pll_setup_d3_e3,
 978 };
 979
 980 static const struct of_device_id rcar_lvds_of_table[] = {
 981         { .compatible = "renesas,r8a7742-lvds", .data = &rcar_lvds_gen2_info },
 982         { .compatible = "renesas,r8a7743-lvds", .data = &rcar_lvds_gen2_info },
 983         { .compatible = "renesas,r8a7744-lvds", .data = &rcar_lvds_gen2_info },
 984         { .compatible = "renesas,r8a774a1-lvds", .data = &rcar_lvds_gen3_info },
 985         { .compatible = "renesas,r8a774b1-lvds", .data = &rcar_lvds_gen3_info },
 986         { .compatible = "renesas,r8a774c0-lvds", .data = &rcar_lvds_r8a77990_info },
 987         { .compatible = "renesas,r8a774e1-lvds", .data = &rcar_lvds_gen3_info },
 988         { .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_gen2_info },
 989         { .compatible = "renesas,r8a7791-lvds", .data = &rcar_lvds_gen2_info },
 990         { .compatible = "renesas,r8a7793-lvds", .data = &rcar_lvds_gen2_info },
 991         { .compatible = "renesas,r8a7795-lvds", .data = &rcar_lvds_gen3_info },
 992         { .compatible = "renesas,r8a7796-lvds", .data = &rcar_lvds_gen3_info },
 993         { .compatible = "renesas,r8a77965-lvds", .data = &rcar_lvds_gen3_info },
 994         { .compatible = "renesas,r8a77970-lvds", .data = &rcar_lvds_r8a77970_info },
 995         { .compatible = "renesas,r8a77980-lvds", .data = &rcar_lvds_gen3_info },
 996         { .compatible = "renesas,r8a77990-lvds", .data = &rcar_lvds_r8a77990_info },
 997         { .compatible = "renesas,r8a77995-lvds", .data = &rcar_lvds_r8a77995_info },
 998         { }
 999 };
1000
1001 MODULE_DEVICE_TABLE(of, rcar_lvds_of_table);
1002
1003 static struct platform_driver rcar_lvds_platform_driver = {
1004         .probe          = rcar_lvds_probe,
1005         .remove         = rcar_lvds_remove,
1006         .driver         = {
1007                 .name   = "rcar-lvds",
1008                 .of_match_table = rcar_lvds_of_table,
1009         },
1010 };
1011
1012 module_platform_driver(rcar_lvds_platform_driver);
1013
1014 MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
1015 MODULE_DESCRIPTION("Renesas R-Car LVDS Encoder Driver");
1016 MODULE_LICENSE("GPL");